Missing whitespace around operator Open
msg += 'was followed by node named: "<%s>"' %str(n.nodeName)
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Too many blank lines (2) Open
X = XML_element(tag=tag,
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Block comment should start with '# ' Open
#else:
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
if len(s)>0: s = s[:-2]
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Block comment should start with '# ' Open
#=================== Useful print statement
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
'Node value: "%s"' %str(n.nodeValue).strip()
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Expected 2 blank lines, found 3 Open
class XML_element(dict):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Missing whitespace around operator Open
tag = '?xml version="%s" encoding="%s"?' %(version, encoding)
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Too many blank lines (2) Open
def __add__(self, other):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Inline comment should start with '# ' Open
return str(other) + str(self) #Python swaps self and other
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Too many blank lines (3) Open
def pretty_print(self, indent=0):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Expected 2 blank lines, found 1 Open
def print_tree(n, indent=0):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Block comment should start with '# ' Open
#----------------------------
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Too many blank lines (2) Open
def __getitem__(self, key):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Line too long (80 > 79 characters) Open
# print 'node tag = %s, node value = %s' %(node.tag, node.value)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Too many blank lines (2) Open
def keys(self):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Line too long (90 > 79 characters) Open
msg = 'A text node was followed by a non-text tag. This is not allowed.\n'
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Missing whitespace around operator Open
msg += 'Offending text node: "%s" ' %str(textnode_encountered)
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Block comment should start with '# ' Open
#if n.nodeType == 3 and str(n.nodeValue).strip() == '':
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
'Node name: "%s",' %n.nodeName,\
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Block comment should start with '# ' Open
#validate(fid, handler)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
'Node type: "%s",' %n.nodeType,\
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Block comment should start with '# ' Open
#return s.replace('\n', '')
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
s += '%s: ' %self.tag
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Too many blank lines (3) Open
def remove_whitespace(s):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Too many blank lines (2) Open
if node.nodeType == 9:
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Missing whitespace around operator Open
s += '<%s>' %self.tag
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Deprecated form of raising exception Open
raise Exception, msg
- Read upRead up
- Exclude checks
When raising an exception, use "raise ValueError('message')".
The older form is removed in Python 3.
Okay: raise DummyError("Message")
W602: raise DummyError, "Message"
Too many blank lines (2) Open
x = n.nodeValue.strip()
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Deprecated form of raising exception Open
raise Exception, msg
- Read upRead up
- Exclude checks
When raising an exception, use "raise ValueError('message')".
The older form is removed in Python 3.
Okay: raise DummyError("Message")
W602: raise DummyError, "Message"
Block comment should start with '# ' Open
#if n.nodeType != Node.ELEMENT_NODE:
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Multiple statements on one line (colon) Open
if len(s)>0: s = s[:-2]
- Read upRead up
- Exclude checks
Compound statements (on the same line) are generally discouraged.
While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!
Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.
Okay: if foo == 'blah':\n do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()
E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four(); # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x
Expected 2 blank lines, found 1 Open
def parse(fid):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Missing whitespace around operator Open
s += '</%s>\n' %self.tag
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Block comment should start with '# ' Open
#s.translate(string.maketrans)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Block comment should start with '# ' Open
#return node.value
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Too many blank lines (2) Open
def has_key(self, key):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Too many blank lines (3) Open
def dom2object(node):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Too many blank lines (3) Open
if tag is None:
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Too many blank lines (3) Open
#----------------------------
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Block comment should start with '# ' Open
#----------------------------
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
msg = 'XML file "%s" could not be parsed.\n' %fid.name
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Deprecated form of raising exception Open
raise Exception, msg
- Read upRead up
- Exclude checks
When raising an exception, use "raise ValueError('message')".
The older form is removed in Python 3.
Okay: raise DummyError("Message")
W602: raise DummyError, "Message"
Missing whitespace around operator Open
msg = 'Could not convert %s into XML object.\n' %fid.name
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
At least two spaces before inline comment Open
words = s.split() # Split on whitespace
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Too many blank lines (2) Open
if textnode_encountered is not None:
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Too many blank lines (2) Open
print_tree(n.firstChild, indent+4)
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Too many blank lines (4) Open
# FIXME: It might be better to represent these objects
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Multiple statements on one line (colon) Open
if len(value) == 0: value = ''
- Read upRead up
- Exclude checks
Compound statements (on the same line) are generally discouraged.
While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!
Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.
Okay: if foo == 'blah':\n do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()
E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four(); # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x
Too many blank lines (5) Open
#=================== Useful print statement
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Block comment should start with '# ' Open
#doc = minidom.parse(fid, make_parser())
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Too many blank lines (2) Open
value.append(dom2object(n))
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Too many blank lines (2) Open
# Deal with empty elements
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Block comment should start with '# ' Open
#return node
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace around operator Open
msg += 'Error message from parser: "%s"' %str(e)
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)