Similar blocks of code found in 2 locations. Consider refactoring. Open
for e in edges_pos:
preds.append(sigmoid(adj_rec[e[0], e[1]]))
pos.append(adj_orig[e[0], e[1]])
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 70.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
for e in edges_neg:
preds_neg.append(sigmoid(adj_rec[e[0], e[1]]))
neg.append(adj_orig[e[0], e[1]])
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 70.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
adj_orig = adj_orig - sp.dia_matrix((adj_orig.diagonal()[np.newaxis, :], [0]), shape=adj_orig.shape)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 43.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
pos_weight = float(adj.shape[0] * adj.shape[0] - adj.sum()) / adj.sum()
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 33.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
norm = adj.shape[0] * adj.shape[0] / float((adj.shape[0] * adj.shape[0] - adj.sum()) * 2)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 33.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Module level import not at top of file Open
from gae.preprocessing import preprocess_graph, construct_feed_dict, sparse_to_tuple, mask_test_edges
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (80 > 79 characters) Open
feed_dict = construct_feed_dict(adj_norm, adj_label, features, placeholders)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
import tensorflow as tf
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (103 > 79 characters) Open
adj_train, train_edges, val_edges, val_edges_false, test_edges, test_edges_false = mask_test_edges(adj)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (81 > 79 characters) Open
flags.DEFINE_float('weight_decay', 0., 'Weight for L2 loss on embedding matrix.')
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
from gae.optimizer import OptimizerAE, OptimizerVAE
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (96 > 79 characters) Open
labels=tf.reshape(tf.sparse_tensor_to_dense(placeholders['adj_orig'],
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (100 > 79 characters) Open
adj_orig = adj_orig - sp.dia_matrix((adj_orig.diagonal()[np.newaxis, :], [0]), shape=adj_orig.shape)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
from gae.input_data import load_data
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Module level import not at top of file Open
from gae.model import GCNModelAE, GCNModelVAE
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (102 > 79 characters) Open
validate_indices=False), [-1]),
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (101 > 79 characters) Open
validate_indices=False), [-1]),
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
import scipy.sparse as sp
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (89 > 79 characters) Open
norm = adj.shape[0] * adj.shape[0] / float((adj.shape[0] * adj.shape[0] - adj.sum()) * 2)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (95 > 79 characters) Open
labels=tf.reshape(tf.sparse_tensor_to_dense(placeholders['adj_orig'],
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
import numpy as np
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Module level import not at top of file Open
from sklearn.metrics import average_precision_score
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (80 > 79 characters) Open
model = GCNModelVAE(placeholders, num_features, num_nodes, features_nonzero)
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Module level import not at top of file Open
from sklearn.metrics import roc_auc_score
- Read upRead up
- Exclude checks
Place imports at the top of the file.
Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.
Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x
Okay: if x:\n import os
Line too long (101 > 79 characters) Open
from gae.preprocessing import preprocess_graph, construct_feed_dict, sparse_to_tuple, mask_test_edges
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (83 > 79 characters) Open
print("Epoch:", '%04d' % (epoch + 1), "train_loss=", "{:.5f}".format(avg_cost),
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (102 > 79 characters) Open
"train_acc=", "{:.5f}".format(avg_accuracy), "val_roc=", "{:.5f}".format(val_roc_score[-1]),
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.