Sign upLogin

jkawamoto/dsargparse

View on GitHub
Star

Showing 71 of 71 total issues

Cyclomatic complexity is too high in method add_parser. (11)
Open

    def add_parser(self, func=None, name=None, **kwargs):
        """Add parser.

        This method makes a new sub command parser. It takes same arguments
        as add_parser() of the action class made by
Severity: Minor
Found in dsargparse.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Function add_parser has a Cognitive Complexity of 16 (exceeds 5 allowed). Consider refactoring.
Open

    def add_parser(self, func=None, name=None, **kwargs):
        """Add parser.

        This method makes a new sub command parser. It takes same arguments
        as add_parser() of the action class made by
Severity: Minor
Found in dsargparse.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Cyclomatic complexity is too high in method __init__. (7)
Open

    def __init__(self, main=None, argmap=None, *args, **kwargs):
        if main:
            if _DESCRIPTION not in kwargs or not kwargs[_DESCRIPTION]:
                info = _parse_doc(inspect.getmodule(main).__doc__)
                kwargs[_DESCRIPTION] = info[_DESCRIPTION]
Severity: Minor
Found in dsargparse.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in function _parse_doc. (6)
Open

def _parse_doc(doc):
    """Parse a docstring.

    Parse a docstring and extract three components; headline, description,
    and map of arguments to help texts.
Severity: Minor
Found in dsargparse.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if _DESCRIPTION not in kwargs or not kwargs[_DESCRIPTION]:
                kwargs[_DESCRIPTION] = info["description"]
Severity: Major
Found in dsargparse.py and 1 other location - About 1 hr to fix
dsargparse.py on lines 124..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if _HELP not in kwargs or not kwargs[_HELP]:
                kwargs[_HELP] = info["headline"]
Severity: Major
Found in dsargparse.py and 1 other location - About 1 hr to fix
dsargparse.py on lines 126..127

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if _FORMAT_CLASS not in kwargs or not kwargs[_FORMAT_CLASS]:
                kwargs[_FORMAT_CLASS] = argparse.RawTextHelpFormatter
Severity: Major
Found in dsargparse.py and 1 other location - About 1 hr to fix
dsargparse.py on lines 128..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 38.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if _FORMAT_CLASS not in kwargs or not kwargs[_FORMAT_CLASS]:
                kwargs[_FORMAT_CLASS] = argparse.RawTextHelpFormatter
Severity: Major
Found in dsargparse.py and 1 other location - About 1 hr to fix
dsargparse.py on lines 165..166

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 38.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function _parse_doc has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring.
Open

def _parse_doc(doc):
    """Parse a docstring.

    Parse a docstring and extract three components; headline, description,
    and map of arguments to help texts.
Severity: Minor
Found in dsargparse.py - About 45 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function __init__ has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

    def __init__(self, main=None, argmap=None, *args, **kwargs):
        if main:
            if _DESCRIPTION not in kwargs or not kwargs[_DESCRIPTION]:
                info = _parse_doc(inspect.getmodule(main).__doc__)
                kwargs[_DESCRIPTION] = info[_DESCRIPTION]
Severity: Minor
Found in dsargparse.py - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function add_argument has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

    def add_argument(self, *args, **kwargs):
        """Add an argument.

        This method adds a new argument to the current parser. The function is
        same as ``argparse.ArgumentParser.add_argument``. However, this method
Severity: Minor
Found in dsargparse.py - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Line too long (80 > 79 characters)
Open

    """Generate a checker which tests a given value not starts with keywords."""
Severity: Minor
Found in dsargparse.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Block comment should start with '# '
Open

#html_logo = None
Severity: Minor
Found in docs/source/conf.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment

Block comment should start with '# '
Open

#html_show_copyright = True
Severity: Minor
Found in docs/source/conf.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment

Block comment should start with '# '
Open

    #'papersize': 'letterpaper',
Severity: Minor
Found in docs/source/conf.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment

Block comment should start with '# '
Open

    #'pointsize': '10pt',
Severity: Minor
Found in docs/source/conf.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment

At least two spaces before inline comment
Open

def goodbye(name): # pylint: disable=unused-argument
Severity: Minor
Found in sample.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment

Block comment should start with '# '
Open

#default_role = None
Severity: Minor
Found in docs/source/conf.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment

Block comment should start with '# '
Open

#add_function_parentheses = True
Severity: Minor
Found in docs/source/conf.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment

Block comment should start with '# '
Open

#html_split_index = False
Severity: Minor
Found in docs/source/conf.py by pep8

Separate inline comments by at least two spaces.

An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.

Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).

Okay: x = x + 1  # Increment x
Okay: x = x + 1    # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1  #Increment x
E262: x = x + 1  #  Increment x
E265: #Block comment
E266: ### Block comment
Severity
Category
Status
Source
Language