Sign upLogin

just-paja/radio-drama-queen

View on GitHub
Star

Showing 100 of 100 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  constructor (props) {
    super(props)
    this.createCategory = this.createCategory.bind(this)
    this.nextBoard = this.nextBoard.bind(this)
    this.nextCategory = this.nextCategory.bind(this)
Severity: Major
Found in src/soundWorkspaces/components/BoardShortcuts.jsx and 1 other location - About 5 hrs to fix
src/electron/libraries/LocalModule.js on lines 20..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  constructor (props) {
    super(props)
    this.inspectFsNodes = this.inspectFsNodes.bind(this)
    this.readContents = this.readContents.bind(this)
    this.readFiles = this.readFiles.bind(this)
Severity: Major
Found in src/electron/libraries/LocalModule.js and 1 other location - About 5 hrs to fix
src/soundWorkspaces/components/BoardShortcuts.jsx on lines 14..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function * addToBoard ({ payload: { board, category, tag } }) {
  if (category) {
    yield put(categoryRoutines.tagAdd({ uuid: category, tag }))
  } else if (board) {
    yield put(boardRoutines.tagAdd({ uuid: board, tag }))
Severity: Major
Found in src/soundWorkspaces/sagas/addTagToBoard.js and 1 other location - About 5 hrs to fix
src/soundWorkspaces/sagas/addSoundToGrid.js on lines 7..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 151.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function * addToGrid ({ payload: { board, category, sound } }) {
  if (category) {
    yield put(categoryRoutines.soundAdd({ uuid: category, sound }))
  } else if (board) {
    yield put(boardRoutines.soundAdd({ uuid: board, sound }))
Severity: Major
Found in src/soundWorkspaces/sagas/addSoundToGrid.js and 1 other location - About 5 hrs to fix
src/soundWorkspaces/sagas/addTagToBoard.js on lines 7..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 151.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

const splitNameFromExtension = (url) => {
  const fileParts = url.split('/')
  const fileName = fileParts[fileParts.length - 1]
  const fileNameParts = fileName.split('.')
  return {
Severity: Major
Found in src/electron/paths.js and 1 other location - About 3 hrs to fix
src/LocalAssetsManager.js on lines 16..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

const splitNameFromExtension = (url) => {
  const fileParts = url.split('/')
  const fileName = fileParts[fileParts.length - 1]
  const fileNameParts = fileName.split('.')
  return {
Severity: Major
Found in src/LocalAssetsManager.js and 1 other location - About 3 hrs to fix
src/electron/paths.js on lines 8..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File Category.jsx has 279 lines of code (exceeds 250 allowed). Consider refactoring.
Open

import Card from '@material-ui/core/Card'
import CardActions from '@material-ui/core/CardActions'
import CardContent from '@material-ui/core/CardContent'
import classnames from 'classnames'
import List from '@material-ui/core/List'
Severity: Minor
Found in src/soundCategories/components/Category.jsx - About 2 hrs to fix

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      constructor (props) {
    super(props)
    this.handleAdd = this.handleAdd.bind(this)
    this.handleKeyDown = this.handleKeyDown.bind(this)
    this.handleSelect = this.handleSelect.bind(this)
    Severity: Major
    Found in src/soundCategories/components/SoundSelectionItem.jsx and 2 other locations - About 2 hrs to fix
    src/components/InputFileSystem.jsx on lines 32..37
    src/soundCategories/components/SoundPlaybackInfo.jsx on lines 44..49

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      constructor (props) {
    super(props)
    this.handleChange = this.handleChange.bind(this)
    this.handleBlur = this.handleBlur.bind(this)
    this.handleButtonClick = this.handleButtonClick.bind(this)
    Severity: Major
    Found in src/components/InputFileSystem.jsx and 2 other locations - About 2 hrs to fix
    src/soundCategories/components/SoundPlaybackInfo.jsx on lines 44..49
    src/soundCategories/components/SoundSelectionItem.jsx on lines 48..53

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

      constructor (props) {
    super(props)
    this.pipePosition = this.pipePosition.bind(this)
    this.reset = this.reset.bind(this)
    this.updatePosition = this.updatePosition.bind(this)
    Severity: Major
    Found in src/soundCategories/components/SoundPlaybackInfo.jsx and 2 other locations - About 2 hrs to fix
    src/components/InputFileSystem.jsx on lines 32..37
    src/soundCategories/components/SoundSelectionItem.jsx on lines 48..53

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function render has 62 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

      render () {
    const {
      boardUuid,
      canDrop,
      classes,
    Severity: Major
    Found in src/soundCategories/components/Category.jsx - About 2 hrs to fix

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

        constructor () {
    super()
    this.handleFilterErrorsChange = this.handleFilterErrorsChange.bind(this)
    this.handleFilterUsedChange = this.handleFilterUsedChange.bind(this)
    this.handleChange = this.handleChange.bind(this)
      Severity: Major
      Found in src/soundGallery/components/GallerySearch.jsx and 2 other locations - About 2 hrs to fix
      src/soundCategories/components/CategoryContextMenu.jsx on lines 14..19
      src/soundGallery/components/GalleryItem.jsx on lines 36..41

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 83.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

        constructor () {
    super()
    this.handleAddSound = this.handleAddSound.bind(this)
    this.handleRemove = this.handleRemove.bind(this)
    this.handleRename = this.handleRename.bind(this)
      Severity: Major
      Found in src/soundCategories/components/CategoryContextMenu.jsx and 2 other locations - About 2 hrs to fix
      src/soundGallery/components/GalleryItem.jsx on lines 36..41
      src/soundGallery/components/GallerySearch.jsx on lines 27..32

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 83.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

        constructor () {
    super()
    this.handlePlayClick = this.handlePlayClick.bind(this)
    this.handleAdd = this.handleAdd.bind(this)
    this.handleTagAdd = this.handleTagAdd.bind(this)
      Severity: Major
      Found in src/soundGallery/components/GalleryItem.jsx and 2 other locations - About 2 hrs to fix
      src/soundCategories/components/CategoryContextMenu.jsx on lines 14..19
      src/soundGallery/components/GallerySearch.jsx on lines 27..32

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 83.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      function * loadSoundInQueue (uuid, sound) {
  const items = [sound]
  if (isQueueRunning()) {
    yield call(queue.addItems, items)
  } else {
      Severity: Major
      Found in src/sounds/sagas/soundLoad.js and 1 other location - About 2 hrs to fix
      src/sounds/sagas/soundRegister.js on lines 15..27

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 81.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      function * registerSoundInQueue ({ payload }) {
  const items = [payload]
  if (isQueueRunning()) {
    yield call(queue.addItems, items)
  } else {
      Severity: Major
      Found in src/sounds/sagas/soundRegister.js and 1 other location - About 2 hrs to fix
      src/sounds/sagas/soundLoad.js on lines 72..84

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 81.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

        getSoundPath (url) {
    const { extension } = splitNameFromExtension(url)
    const sum = hash.sha256().update(url).digest('hex')
    return jetpack.path(this.home, `${sum}.${extension}`)
  }
      Severity: Major
      Found in src/LocalAssetsManager.js and 1 other location - About 2 hrs to fix
      src/electron/SoundStorage.js on lines 25..29

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 80.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

        getCachePath (url) {
    const { extension } = splitNameFromExtension(url)
    const sum = hash.sha256().update(url).digest('hex')
    return jetpack.path(this.pathHome, `${sum}.${extension}`)
  }
      Severity: Major
      Found in src/electron/SoundStorage.js and 1 other location - About 2 hrs to fix
      src/LocalAssetsManager.js on lines 72..76

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 80.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

        increaseVolume () {
    const { category } = this.props
    if (category.volume < 100) {
      this.props.onVolumeChange(category.uuid, Math.min(category.volume + 5, 100))
    }
      Severity: Major
      Found in src/soundCategories/components/Category.jsx and 1 other location - About 2 hrs to fix
      src/soundCategories/components/Category.jsx on lines 138..143

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 77.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

        decreaseVolume () {
    const { category } = this.props
    if (category.volume > 0) {
      this.props.onVolumeChange(category.uuid, Math.max(category.volume - 5, 0))
    }
      Severity: Major
      Found in src/soundCategories/components/Category.jsx and 1 other location - About 2 hrs to fix
      src/soundCategories/components/Category.jsx on lines 145..150

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 77.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language