KapostDeploy::Task#define_hook has approx 6 statements Open
def define_hook(kind)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
KapostDeploy::Task has at least 10 instance variables Open
class Task < Rake::TaskLib
- Read upRead up
- Exclude checks
Too Many Instance Variables
is a special case of LargeClass
.
Example
Given this configuration
TooManyInstanceVariables:
max_instance_variables: 3
and this code:
class TooManyInstanceVariables
def initialize
@arg_1 = :dummy
@arg_2 = :dummy
@arg_3 = :dummy
@arg_4 = :dummy
end
end
Reek would emit the following warning:
test.rb -- 5 warnings:
[1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)
KapostDeploy::Task#self.define has approx 6 statements Open
def self.define(name = :promote) # :yield: self
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
KapostDeploy::Task#defaults has approx 9 statements Open
def defaults
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
KapostDeploy::Task#defaults calls '-> {}' 2 times Open
@before = -> {}
@after = -> {}
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
KapostDeploy::Task#promote_with_hooks calls 'Rake.application' 2 times Open
Rake.application[hook_name("before")].execute
promoter.promote(from: app, to: to)
Rake.application[hook_name("after")].execute
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
KapostDeploy::Task#define_hook manually dispatches method call Open
plugin.send(kind) if plugin.respond_to?(kind)
- Read upRead up
- Exclude checks
Reek reports a Manual Dispatch smell if it finds source code that manually checks whether an object responds to a method before that method is called. Manual dispatch is a type of Simulated Polymorphism which leads to code that is harder to reason about, debug, and refactor.
Example
class MyManualDispatcher
attr_reader :foo
def initialize(foo)
@foo = foo
end
def call
foo.bar if foo.respond_to?(:bar)
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[9]: MyManualDispatcher manually dispatches method call (ManualDispatch)
KapostDeploy::Task assumes too much for instance variable '@shell' Open
class Task < Rake::TaskLib
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
KapostDeploy::Task#to is a writable attribute Open
attr_accessor :to
- Read upRead up
- Exclude checks
A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.
The same holds to a lesser extent for getters, but Reek doesn't flag those.
Example
Given:
class Klass
attr_accessor :dummy
end
Reek would emit the following warning:
reek test.rb
test.rb -- 1 warning:
[2]:Klass declares the writable attribute dummy (Attribute)
KapostDeploy::Task#name is a writable attribute Open
attr_accessor :name
- Read upRead up
- Exclude checks
A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.
The same holds to a lesser extent for getters, but Reek doesn't flag those.
Example
Given:
class Klass
attr_accessor :dummy
end
Reek would emit the following warning:
reek test.rb
test.rb -- 1 warning:
[2]:Klass declares the writable attribute dummy (Attribute)
KapostDeploy::Task#validate performs a nil-check Open
fail "No 'pipeline' configured. Set config.pipeline to the name of your pipeline" if pipeline.nil?
fail "No 'app' configured. Set config.app to the application to be promoted" if app.nil?
fail "No 'to' configured. Set config.to to the downstream application to be promoted to" if to.nil?
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
KapostDeploy::Task#options is a writable attribute Open
attr_accessor :options
- Read upRead up
- Exclude checks
A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.
The same holds to a lesser extent for getters, but Reek doesn't flag those.
Example
Given:
class Klass
attr_accessor :dummy
end
Reek would emit the following warning:
reek test.rb
test.rb -- 1 warning:
[2]:Klass declares the writable attribute dummy (Attribute)
KapostDeploy::Task#heroku_api_token is a writable attribute Open
attr_accessor :heroku_api_token
- Read upRead up
- Exclude checks
A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.
The same holds to a lesser extent for getters, but Reek doesn't flag those.
Example
Given:
class Klass
attr_accessor :dummy
end
Reek would emit the following warning:
reek test.rb
test.rb -- 1 warning:
[2]:Klass declares the writable attribute dummy (Attribute)
KapostDeploy::Task#app is a writable attribute Open
attr_accessor :app
- Read upRead up
- Exclude checks
A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.
The same holds to a lesser extent for getters, but Reek doesn't flag those.
Example
Given:
class Klass
attr_accessor :dummy
end
Reek would emit the following warning:
reek test.rb
test.rb -- 1 warning:
[2]:Klass declares the writable attribute dummy (Attribute)
KapostDeploy::Task#pipeline is a writable attribute Open
attr_accessor :pipeline
- Read upRead up
- Exclude checks
A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.
The same holds to a lesser extent for getters, but Reek doesn't flag those.
Example
Given:
class Klass
attr_accessor :dummy
end
Reek would emit the following warning:
reek test.rb
test.rb -- 1 warning:
[2]:Klass declares the writable attribute dummy (Attribute)
KapostDeploy::Task#define_hook has the variable name 'p' Open
plugins.each do |p|
- Read upRead up
- Exclude checks
An Uncommunicative Variable Name
is a variable name that doesn't communicate its intent well enough.
Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.
Do not place comments on the same line as the def
keyword. Open
def self.define(name = :promote) # :yield: self
- Read upRead up
- Exclude checks
This cop checks for comments put on the same line as some keywords.
These keywords are: begin
, class
, def
, end
, module
.
Note that some comments (such as :nodoc:
and rubocop:disable
) are
allowed.
Example:
# bad
if condition
statement
end # end if
# bad
class X # comment
statement
end
# bad
def x; end # comment
# good
if condition
statement
end
# good
class X # :nodoc:
y
end