examples/heater_cooler.rb
require "ruby_home"
accessory_information = RubyHome::ServiceFactory.create(:accessory_information)
heater_cooler = RubyHome::ServiceFactory.create(:heater_cooler,
current_temperature: 20, # required
target_heater_cooler_state: 1, # required
current_heater_cooler_state: 2, # required
active: 1, # required
name: "heater cooler", # optional
rotation_speed: 0, # optional
temperature_display_units: 0, # optional
heating_threshold_temperature: 20, # optional
cooling_threshold_temperature: 10, # optional
swing_mode: 1, # optional
lock_physical_controls: 0) # optional
heater_cooler.current_temperature.after_update do |current_temperature|
puts "heater cooler current temperature in celsius #{current_temperature}"
end
target_heater_cooler_state_values = {
0 => "Auto",
1 => "Heat",
2 => "Cool"
}
heater_cooler.target_heater_cooler_state.after_update do |target_heater_cooler_state|
state = target_heater_cooler_state_values[target_heater_cooler_state]
puts "heater cooler target heater cooler state is #{state}"
end
current_heater_cooler_state_values = {
0 => "Inactive",
1 => "Idle",
2 => "Heating",
3 => "Cooling"
}
heater_cooler.current_heater_cooler_state.after_update do |current_heater_cooler_state|
state = current_heater_cooler_state_values[current_heater_cooler_state]
puts "heater cooler target heater cooler state is #{state}"
end
heater_cooler.active.after_update do |active|
if active == 0
puts "heater cooler is inactive"
elsif active == 1
puts "heater cooler is active"
end
end
heater_cooler.rotation_speed.after_update do |rotation_speed|
puts "heater cooler is spinning at #{rotation_speed} speed"
end
heater_cooler.temperature_display_units.after_update do |temperature_display_unit|
if temperature_display_unit == 0
puts "heater cooler temperature display units Celsius"
elsif temperature_display_unit == 1
puts "heater cooler temperature display units Fahrenheit"
end
end
heater_cooler.heating_threshold_temperature.after_update do |heating_threshold_temperature|
# maximum_value: 25
# minimum_value: 0
# step_value: 0.1
puts "heater cooler heating threshold temperature #{heating_threshold_temperature}"
end
heater_cooler.cooling_threshold_temperature.after_update do |cooling_threshold_temperature|
# maximum_value: 35
# minimum_value: 10
# step_value: 0.1
puts "heater cooler cooling threshold temperature temperature #{cooling_threshold_temperature}"
end
heater_cooler.swing_mode.after_update do |swing_mode|
if swing_mode == 0
puts "heater cooler swimg is disabled"
elsif swing_mode == 1
puts "heater cooler swimg is enabled"
end
end
heater_cooler.lock_physical_controls.after_update do |lock_physical_controls|
if lock_physical_controls == 0
puts "heater cooler control lock disabled"
elsif lock_physical_controls == 1
puts "heater cooler control lock enabled"
end
end
RubyHome.run