kengz/SLM-Lab

View on GitHub

Showing 95 of 95 total issues

Function dev_check_train_step has a Cognitive Complexity of 22 (exceeds 10 allowed). Consider refactoring.
Open

def dev_check_train_step(fn):
    '''
    Decorator to check if net.train_step actually updates the network weights properly
    Triggers only if to_check_train_step is True (dev/test mode)
    @example
Severity: Minor
Found in slm_lab/agent/net/net_util.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def __init__(self, spec):
        self.spec = spec
        self.index = self.spec['meta']['trial']
        util.set_logger(self.spec, logger, 'trial')
        spec_util.save(spec, unit='trial')
Severity: Major
Found in slm_lab/experiment/control.py and 1 other location - About 2 hrs to fix
slm_lab/experiment/control.py on lines 194..198

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 61.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def __init__(self, spec):
        self.spec = spec
        self.index = self.spec['meta']['experiment']
        util.set_logger(self.spec, logger, 'trial')
        spec_util.save(spec, unit='experiment')
Severity: Major
Found in slm_lab/experiment/control.py and 1 other location - About 2 hrs to fix
slm_lab/experiment/control.py on lines 132..136

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 61.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if 'Prioritized' in util.get_class_name(self.body.memory):  # PER
            errors = (max_q_targets - act_q_preds.detach()).abs().cpu().numpy()
            self.body.memory.update_priorities(errors)
Severity: Major
Found in slm_lab/agent/algorithm/dqn.py and 1 other location - About 2 hrs to fix
slm_lab/agent/algorithm/dqn.py on lines 105..107

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if 'Prioritized' in util.get_class_name(self.body.memory):  # PER
            errors = (max_q_targets - act_q_preds.detach()).abs().cpu().numpy()
            self.body.memory.update_priorities(errors)
Severity: Major
Found in slm_lab/agent/algorithm/dqn.py and 1 other location - About 2 hrs to fix
slm_lab/agent/algorithm/dqn.py on lines 208..210

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        util.set_attr(self, dict(
            out_layer_activation=None,
            init_fn=None,
            normalize=False,
            batch_norm=True,
Severity: Major
Found in slm_lab/agent/net/q_net.py and 2 other locations - About 1 hr to fix
slm_lab/agent/net/conv.py on lines 81..88
slm_lab/agent/net/q_net.py on lines 70..77

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        util.set_attr(self, dict(
            out_layer_activation=None,
            init_fn=None,
            normalize=False,
            batch_norm=True,
Severity: Major
Found in slm_lab/agent/net/q_net.py and 2 other locations - About 1 hr to fix
slm_lab/agent/net/conv.py on lines 81..88
slm_lab/agent/net/q_net.py on lines 136..143

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        util.set_attr(self, dict(
            out_layer_activation=None,
            init_fn=None,
            normalize=False,
            batch_norm=True,
Severity: Major
Found in slm_lab/agent/net/conv.py and 2 other locations - About 1 hr to fix
slm_lab/agent/net/q_net.py on lines 70..77
slm_lab/agent/net/q_net.py on lines 136..143

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for t in reversed(range(T)):
        rets[t] = future_ret = rewards[t] + gamma * future_ret * not_dones[t]
Severity: Major
Found in slm_lab/lib/math_util.py and 1 other location - About 1 hr to fix
slm_lab/lib/math_util.py on lines 84..85

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for t in reversed(range(n)):
        rets[t] = future_ret = rewards[t] + gamma * future_ret * not_dones[t]
Severity: Major
Found in slm_lab/lib/math_util.py and 1 other location - About 1 hr to fix
slm_lab/lib/math_util.py on lines 70..71

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function flatten_dict has a Cognitive Complexity of 18 (exceeds 10 allowed). Consider refactoring.
Open

def flatten_dict(obj, delim='.'):
    '''Missing pydash method to flatten dict'''
    nobj = {}
    for key, val in obj.items():
        if ps.is_dict(val) and not ps.is_empty(val):
Severity: Minor
Found in slm_lab/lib/util.py - About 1 hr to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if len(body.train_df) > 2:  # need more rows to calculate metrics
                metrics = analysis.analyze_session(self.spec, body.train_df, 'train', plot=False)
                body.log_metrics(metrics['scalar'], 'train')
Severity: Major
Found in slm_lab/experiment/control.py and 1 other location - About 1 hr to fix
slm_lab/experiment/control.py on lines 82..84

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 53.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if len(body.eval_df) > 2:  # need more rows to calculate metrics
                metrics = analysis.analyze_session(self.spec, body.eval_df, 'eval', plot=False)
                body.log_metrics(metrics['scalar'], 'eval')
Severity: Major
Found in slm_lab/experiment/control.py and 1 other location - About 1 hr to fix
slm_lab/experiment/control.py on lines 73..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 53.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 7 locations. Consider refactoring.
Open

            logger.debug(f'Trained {self.name} at epi: {clock.epi}, frame: {clock.frame}, t: {clock.t}, total_reward so far: {self.body.env.total_reward}, loss: {loss:g}')
Severity: Major
Found in slm_lab/agent/algorithm/actor_critic.py and 6 other locations - About 1 hr to fix
slm_lab/agent/algorithm/dqn.py on lines 144..144
slm_lab/agent/algorithm/ppo.py on lines 212..212
slm_lab/agent/algorithm/reinforce.py on lines 158..158
slm_lab/agent/algorithm/sac.py on lines 226..226
slm_lab/agent/algorithm/sarsa.py on lines 144..144
slm_lab/agent/algorithm/sil.py on lines 148..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 7 locations. Consider refactoring.
Open

            logger.debug(f'Trained {self.name} at epi: {clock.epi}, frame: {clock.frame}, t: {clock.t}, total_reward so far: {self.body.env.total_reward}, loss: {loss:g}')
Severity: Major
Found in slm_lab/agent/algorithm/sac.py and 6 other locations - About 1 hr to fix
slm_lab/agent/algorithm/actor_critic.py on lines 298..298
slm_lab/agent/algorithm/dqn.py on lines 144..144
slm_lab/agent/algorithm/ppo.py on lines 212..212
slm_lab/agent/algorithm/reinforce.py on lines 158..158
slm_lab/agent/algorithm/sarsa.py on lines 144..144
slm_lab/agent/algorithm/sil.py on lines 148..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 7 locations. Consider refactoring.
Open

            logger.debug(f'Trained {self.name} at epi: {clock.epi}, frame: {clock.frame}, t: {clock.t}, total_reward so far: {self.body.env.total_reward}, loss: {loss:g}')
Severity: Major
Found in slm_lab/agent/algorithm/ppo.py and 6 other locations - About 1 hr to fix
slm_lab/agent/algorithm/actor_critic.py on lines 298..298
slm_lab/agent/algorithm/dqn.py on lines 144..144
slm_lab/agent/algorithm/reinforce.py on lines 158..158
slm_lab/agent/algorithm/sac.py on lines 226..226
slm_lab/agent/algorithm/sarsa.py on lines 144..144
slm_lab/agent/algorithm/sil.py on lines 148..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 7 locations. Consider refactoring.
Open

            logger.debug(f'Trained {self.name} at epi: {clock.epi}, frame: {clock.frame}, t: {clock.t}, total_reward so far: {self.body.env.total_reward}, loss: {loss:g}')
Severity: Major
Found in slm_lab/agent/algorithm/sarsa.py and 6 other locations - About 1 hr to fix
slm_lab/agent/algorithm/actor_critic.py on lines 298..298
slm_lab/agent/algorithm/dqn.py on lines 144..144
slm_lab/agent/algorithm/ppo.py on lines 212..212
slm_lab/agent/algorithm/reinforce.py on lines 158..158
slm_lab/agent/algorithm/sac.py on lines 226..226
slm_lab/agent/algorithm/sil.py on lines 148..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 7 locations. Consider refactoring.
Open

            logger.debug(f'Trained {self.name} at epi: {clock.epi}, frame: {clock.frame}, t: {clock.t}, total_reward so far: {self.body.env.total_reward}, loss: {loss:g}')
Severity: Major
Found in slm_lab/agent/algorithm/reinforce.py and 6 other locations - About 1 hr to fix
slm_lab/agent/algorithm/actor_critic.py on lines 298..298
slm_lab/agent/algorithm/dqn.py on lines 144..144
slm_lab/agent/algorithm/ppo.py on lines 212..212
slm_lab/agent/algorithm/sac.py on lines 226..226
slm_lab/agent/algorithm/sarsa.py on lines 144..144
slm_lab/agent/algorithm/sil.py on lines 148..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 7 locations. Consider refactoring.
Open

            logger.debug(f'Trained {self.name} at epi: {clock.epi}, frame: {clock.frame}, t: {clock.t}, total_reward so far: {self.body.env.total_reward}, loss: {loss:g}')
Severity: Major
Found in slm_lab/agent/algorithm/dqn.py and 6 other locations - About 1 hr to fix
slm_lab/agent/algorithm/actor_critic.py on lines 298..298
slm_lab/agent/algorithm/ppo.py on lines 212..212
slm_lab/agent/algorithm/reinforce.py on lines 158..158
slm_lab/agent/algorithm/sac.py on lines 226..226
slm_lab/agent/algorithm/sarsa.py on lines 144..144
slm_lab/agent/algorithm/sil.py on lines 148..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 7 locations. Consider refactoring.
Open

            logger.debug(f'Trained {self.name} at epi: {clock.epi}, frame: {clock.frame}, t: {clock.t}, total_reward so far: {self.body.env.total_reward}, loss: {loss:g}')
Severity: Major
Found in slm_lab/agent/algorithm/sil.py and 6 other locations - About 1 hr to fix
slm_lab/agent/algorithm/actor_critic.py on lines 298..298
slm_lab/agent/algorithm/dqn.py on lines 144..144
slm_lab/agent/algorithm/ppo.py on lines 212..212
slm_lab/agent/algorithm/reinforce.py on lines 158..158
slm_lab/agent/algorithm/sac.py on lines 226..226
slm_lab/agent/algorithm/sarsa.py on lines 144..144

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language