Sign upLogin

kontron/python-ipmi

View on GitHub
Star

Showing 341 of 341 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        Bitfield('additional_support', 1,
                 Bitfield.Bit('sensor', 1),
                 Bitfield.Bit('sdr_repository', 1),
                 Bitfield.Bit('sel', 1),
                 Bitfield.Bit('fru_inventory', 1),
Severity: Major
Found in pyipmi/msgs/bmc.py and 1 other location - About 3 hrs to fix
pyipmi/msgs/hpm.py on lines 46..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function _send_and_receive has a Cognitive Complexity of 25 (exceeds 5 allowed). Consider refactoring.
Open

    def _send_and_receive(self, target, lun, netfn, cmdid, payload):
        """Send and receive data using RMCP interface.

        target:
        lun:
Severity: Minor
Found in pyipmi/interfaces/rmcp.py - About 3 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        if (len(subcommands) == len(argv) + 1
                and subcommands[:len(argv)] == argv):
            commands.append(cmd)
            if cmd.arguments:
                maxlen = max(maxlen, len(cmd.name)+len(cmd.arguments)+1)
Severity: Major
Found in pyipmi/ipmitool.py and 2 other locations - About 3 hrs to fix
pyipmi/ipmitool.py on lines 438..444
pyipmi/ipmitool.py on lines 450..456

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

            if (len(subcommands) == len(argv)
                    and subcommands[:len(argv)] == argv):
                commands.append(cmd)
                if cmd.arguments:
                    maxlen = max(maxlen, len(cmd.name)+len(cmd.arguments)+1)
Severity: Major
Found in pyipmi/ipmitool.py and 2 other locations - About 3 hrs to fix
pyipmi/ipmitool.py on lines 426..432
pyipmi/ipmitool.py on lines 438..444

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

            if (len(subcommands) > len(argv) + 1
                    and subcommands[:len(argv)] == argv):
                commands.append(cmd)
                if cmd.arguments:
                    maxlen = max(maxlen, len(cmd.name)+len(cmd.arguments)+1)
Severity: Major
Found in pyipmi/ipmitool.py and 2 other locations - About 3 hrs to fix
pyipmi/ipmitool.py on lines 426..432
pyipmi/ipmitool.py on lines 450..456

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Picmg has 28 functions (exceeds 20 allowed). Consider refactoring.
Open

class Picmg(object):
    def get_picmg_properties(self):
        return self.send_message_with_name('GetPicmgProperties')

    def fru_control(self, fru_id, option):
Severity: Minor
Found in pyipmi/picmg.py - About 3 hrs to fix

    Function parse_interface_options has a Cognitive Complexity of 23 (exceeds 5 allowed). Consider refactoring.
    Open

    def parse_interface_options(interface_name, options):
    if options:
        options = options.split(',')

    interface_options = {}
    Severity: Minor
    Found in pyipmi/ipmitool.py - About 3 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    @register_message_class
class GetSdrRepositoryAllocationInfoRsp(Message):
    __cmdid__ = constants.CMDID_GET_SDR_REPOSITORY_ALLOCATION_INFO
    __netfn__ = constants.NETFN_STORAGE | 1
    __fields__ = (
    Severity: Major
    Found in pyipmi/msgs/sdr.py and 1 other location - About 3 hrs to fix
    pyipmi/msgs/sel.py on lines 62..72

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 65.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    @register_message_class
class GetSelAllocationInfoRsp(Message):
    __cmdid__ = constants.CMDID_GET_SEL_ALLOCATION_INFO
    __netfn__ = constants.NETFN_STORAGE | 1
    __fields__ = (
    Severity: Major
    Found in pyipmi/msgs/sel.py and 1 other location - About 3 hrs to fix
    pyipmi/msgs/sdr.py on lines 63..73

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 65.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        def device_sdr_entries(self):
        """A generator that returns the SDR list.

        Starting with ID=0x0000 and
        end when ID=0xffff is returned.
    Severity: Major
    Found in pyipmi/sensor.py and 1 other location - About 3 hrs to fix
    pyipmi/sdr.py on lines 93..107

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 64.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        def sdr_repository_entries(self):
        """A generator that returns the SDR list.

        The Generator starts with ID=0x0000 and ends when ID=0xffff
        is returned.
    Severity: Major
    Found in pyipmi/sdr.py and 1 other location - About 3 hrs to fix
    pyipmi/sensor.py on lines 139..153

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 64.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    File message.py has 297 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    # Copyright (c) 2014  Kontron Europe GmbH
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
    Severity: Minor
    Found in pyipmi/msgs/message.py - About 3 hrs to fix

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      @register_message_class
class VitaSetFruLedStateReq(VitaMessage):
    __cmdid__ = constants.CMDID_VITA_SET_FRU_LED_STATE
    __netfn__ = constants.NETFN_GROUP_EXTENSION
    __fields__ = (
      Severity: Major
      Found in pyipmi/msgs/vita.py and 1 other location - About 3 hrs to fix
      pyipmi/msgs/picmg.py on lines 696..706

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 4 locations. Consider refactoring.
      Open

              Bitfield('activation_policy_mask', 1,
                 Bitfield.Bit('activation_lock', 1, default=0),
                 Bitfield.Bit('deactivation_lock', 1, default=0),
                 Bitfield.Bit('commanded_deactivation_ignored', 1, default=0),
                 Bitfield.Bit('default_activation_locked', 1, default=0),
      Severity: Major
      Found in pyipmi/msgs/vita.py and 3 other locations - About 3 hrs to fix
      pyipmi/msgs/vita.py on lines 291..296
      pyipmi/msgs/vita.py on lines 357..362
      pyipmi/msgs/vita.py on lines 393..398

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 4 locations. Consider refactoring.
      Open

              Bitfield('state', 1,
                 Bitfield.Bit('ipmc_control', 1, default=0),
                 Bitfield.Bit('override', 1, default=0),
                 Bitfield.Bit('lamp_test', 1, default=0),
                 Bitfield.Bit('hardware_restrict', 1, default=0),
      Severity: Major
      Found in pyipmi/msgs/vita.py and 3 other locations - About 3 hrs to fix
      pyipmi/msgs/vita.py on lines 351..356
      pyipmi/msgs/vita.py on lines 357..362
      pyipmi/msgs/vita.py on lines 393..398

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      @register_message_class
class SendPowerChannelControlReq(PicmgMessage):
    __cmdid__ = constants.CMDID_POWER_CHANNEL_CONTROL
    __netfn__ = constants.NETFN_GROUP_EXTENSION
    __fields__ = (
      Severity: Major
      Found in pyipmi/msgs/picmg.py and 1 other location - About 3 hrs to fix
      pyipmi/msgs/vita.py on lines 249..259

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 4 locations. Consider refactoring.
      Open

              Bitfield('activation_policy_set', 1,
                 Bitfield.Bit('activation_lock', 1, default=0),
                 Bitfield.Bit('deactivation_lock', 1, default=0),
                 Bitfield.Bit('commanded_deactivation_ignored', 1, default=0),
                 Bitfield.Bit('default_activation_locked', 1, default=0),
      Severity: Major
      Found in pyipmi/msgs/vita.py and 3 other locations - About 3 hrs to fix
      pyipmi/msgs/vita.py on lines 291..296
      pyipmi/msgs/vita.py on lines 351..356
      pyipmi/msgs/vita.py on lines 393..398

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

              Bitfield('current_power_state', 1,
                 Bitfield.Bit('power_on', 1),
                 Bitfield.Bit('power_overload', 1),
                 Bitfield.Bit('interlock', 1),
                 Bitfield.Bit('power_fault', 1),
      Severity: Major
      Found in pyipmi/msgs/chassis.py and 1 other location - About 3 hrs to fix
      pyipmi/msgs/chassis.py on lines 91..98

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

              Bitfield('misc_chassis_state', 1,
                 Bitfield.Bit('chassis_intrusion_active', 1),
                 Bitfield.Bit('front_panel_lockout_active', 1),
                 Bitfield.Bit('drive_fault', 1),
                 Bitfield.Bit('cooling_fault_detected', 1),
      Severity: Major
      Found in pyipmi/msgs/chassis.py and 1 other location - About 3 hrs to fix
      pyipmi/msgs/chassis.py on lines 76..83

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 4 locations. Consider refactoring.
      Open

              Bitfield('activation_policies', 1,
                 Bitfield.Bit('activation_lock', 1, default=0),
                 Bitfield.Bit('deactivation_lock', 1, default=0),
                 Bitfield.Bit('commanded_deactivation_ignored', 1, default=0),
                 Bitfield.Bit('default_activation_locked', 1, default=0),
      Severity: Major
      Found in pyipmi/msgs/vita.py and 3 other locations - About 3 hrs to fix
      pyipmi/msgs/vita.py on lines 291..296
      pyipmi/msgs/vita.py on lines 351..356
      pyipmi/msgs/vita.py on lines 357..362

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 62.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language