pyipmi/msgs/constants.py
# Copyright (c) 2014 Kontron Europe GmbH
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
# completion codes
CC_OK = 0x00
CC_NODE_BUSY = 0xc0
CC_INV_CMD = 0xc1
CC_INV_CMD_FOR_LUN = 0xc2
CC_TIMEOUT = 0xc3
CC_OUT_OF_SPACE = 0xc4
CC_RES_CANCELED = 0xc5
CC_REQ_DATA_TRUNC = 0xc6
CC_REQ_DATA_INV_LENGTH = 0xc7
CC_REQ_DATA_FIELD_EXCEED = 0xc8
CC_PARAM_OUT_OF_RANGE = 0xc9
CC_CANT_RET_NUM_REQ_BYTES = 0xca
CC_REQ_DATA_NOT_PRESENT = 0xcb
CC_INV_DATA_FIELD_IN_REQ = 0xcc
CC_ILL_SENSOR_OR_RECORD = 0xcd
CC_RESP_COULD_NOT_BE_PRV = 0xce
CC_CANT_RESP_DUPLI_REQ = 0xcf
CC_CANT_RESP_SDRR_UPDATE = 0xd0
CC_CANT_RESP_FIRM_UPDATE = 0xd1
CC_CANT_RESP_BMC_INIT = 0xd2
CC_DESTINATION_UNAVAILABLE = 0xd3
CC_INSUFFICIENT_PRIVILEGES = 0xd4
CC_NOT_SUPPORTED_PRESENT_STATE = 0xd5
CC_ILLEGAL_COMMAND_DISABLED = 0xd6
CC_UNSPECIFIED_ERROR = 0xff
COMPLETION_CODE_DESCR = (
(CC_OK, 'Command Completed Normally'),
(CC_NODE_BUSY, 'Node Busy'),
(CC_INV_CMD, 'Invalid Command'),
(CC_INV_CMD_FOR_LUN, 'Command invalid for given LUN'),
(CC_TIMEOUT, 'Timeout while processing command'),
(CC_OUT_OF_SPACE, 'Out of space'),
(CC_RES_CANCELED, 'Reservation Canceled or Invalid Reservation ID'),
(CC_REQ_DATA_TRUNC, 'Request data truncated'),
(CC_REQ_DATA_INV_LENGTH, 'Request data length invalid'),
(CC_REQ_DATA_FIELD_EXCEED, 'Request data field length limit exceeded'),
(CC_PARAM_OUT_OF_RANGE, 'Parameter out of range'),
(CC_CANT_RET_NUM_REQ_BYTES,
'Cannot return number of requested data bytes'),
(CC_REQ_DATA_NOT_PRESENT, 'Requested data not present'),
(CC_INV_DATA_FIELD_IN_REQ, 'Invalid data field in Request'),
(CC_ILL_SENSOR_OR_RECORD,
'Command illegal for specified sensor or record'),
(CC_RESP_COULD_NOT_BE_PRV, 'Command response could not be provided'),
(CC_CANT_RESP_DUPLI_REQ, 'Cannot execute duplicated request'),
(CC_CANT_RESP_SDRR_UPDATE,
'Command response could not be provided. SDRR in update mode'),
(CC_CANT_RESP_FIRM_UPDATE,
'Command response could not be provided. Device in firmware '
'update mode'),
(CC_CANT_RESP_BMC_INIT,
'Command response could not be provided. BMC initialization or '
'initialization agent in progress'),
(CC_DESTINATION_UNAVAILABLE, 'Destination unavailable'),
(CC_INSUFFICIENT_PRIVILEGES,
'Cannot execute command due to insufficient privilege level'),
(CC_NOT_SUPPORTED_PRESENT_STATE,
'Cannot execute command. Not supported in present state'),
(CC_ILLEGAL_COMMAND_DISABLED,
'Cannot execute command. Command sub-function has been disabled '
'or is unavailable'),
(CC_UNSPECIFIED_ERROR, 'Unspecified error'),
)
# network functions
NETFN_CHASSIS = 0x00
NETFN_BRIDGE = 0x02
NETFN_SENSOR_EVENT = 0x04
NETFN_APP = 0x06
NETFN_FIRMWARE = 0x08
NETFN_STORAGE = 0x0a
NETFN_TRANSPORT = 0x0c
NETFN_GROUP_EXTENSION = 0x2c
NETFN_OEM = 0x2e
NETFN_DESCR = (
(NETFN_CHASSIS, 'Chassis'),
(NETFN_BRIDGE, 'Bridge'),
(NETFN_SENSOR_EVENT, 'Sensor/Event'),
(NETFN_APP, 'App'),
(NETFN_FIRMWARE, 'Firmware'),
(NETFN_STORAGE, 'Storage'),
(NETFN_TRANSPORT, 'Transport'),
(NETFN_GROUP_EXTENSION, 'Group Extension'),
(NETFN_OEM, 'IANA'),
)
# IPM device 'global' .. NetFn App
CMDID_GET_DEVICE_ID = 0x01
CMDID_COLD_RESET = 0x02
CMDID_WARM_RESET = 0x03
CMDID_GET_SELF_TEST_RESULTS = 0x04
CMDID_MANUFACTURING_TEST_ON = 0x05
CMDID_SET_ACPI_POWER_STATE = 0x06
CMDID_GET_ACPI_POWER_STATE = 0x07
CMDID_GET_DEVICE_GUID = 0x08
CMDID_GET_NETFN_SUPPORT = 0x09
CMDID_GET_COMMAND_SUPPORT = 0x0a
CMDID_GET_COMMAND_SUBFUNCTION_SUPPORT = 0x0b
CMDID_GET_CONFIGURATION_COMMANDS = 0x0c
CMDID_GET_CONFIGURATION_SUBFUNCTION_COMMANDS = 0x0d
CMDID_SET_COMMAND_ENABLES = 0x60
CMDID_GET_COMMAND_ENABLES = 0x61
CMDID_SET_COMMAND_SUBFUNCTION_ENABLES = 0x62
CMDID_GET_COMMAND_SUBFUNCTION_ENABLES = 0x63
CMDID_GET_OEM_NETFN_IANA_SUPPORT = 0x64
# BMC watchdog timer .. NetFn App
CMDID_RESET_WATCHDOG_TIMER = 0x22
CMDID_SET_WATCHDOG_TIMER = 0x24
CMDID_GET_WATCHDOG_TIMER = 0x25
# BMC device and messaging .. NetFn App
CMDID_SET_BMC_GLOBAL_ENABLES = 0x2e
CMDID_GET_BMC_GLOBAL_ENABLES = 0x2f
CMDID_CLEAR_MESSAGE_FLAGS = 0x30
CMDID_GET_MESSAGE_FLAGS = 0x31
CMDID_ENABLE_MESSAGE_CHANNEL_RECEIVE = 0x32
CMDID_GET_MESSAGE = 0x33
CMDID_SEND_MESSAGE = 0x34
CMDID_READ_EVENT_MESSAGE_BUFFER = 0x35
CMDID_GET_BT_INTERFACE_CAPABILITIES = 0x36
CMDID_GET_SYSTEM_GUID = 0x37
CMDID_GET_CHANNEL_AUTHENTICATION_CAPABILITIES = 0x38
CMDID_GET_SESSION_CHALLENGE = 0x39
CMDID_ACTIVATE_SESSION = 0x3a
CMDID_SET_SESSION_PRIVILEGE_LEVEL = 0x3b
CMDID_CLOSE_SESSION = 0x3c
CMDID_GET_SESSION_INFO = 0x3d
CMDID_GET_AUTHCODE = 0x3f
CMDID_SET_CHANNEL_ACCESS = 0x40
CMDID_GET_CHANNEL_ACCESS = 0x41
CMDID_GET_CHANNEL_INFO = 0x42
CMDID_SET_USER_ACCESS = 0x43
CMDID_GET_USER_ACCESS = 0x44
CMDID_SET_USER_NAME = 0x45
CMDID_GET_USER_NAME = 0x46
CMDID_SET_USER_PASSWORD = 0x47
CMDID_ACTIVATE_PAYLOAD = 0x48
CMDID_DEACTIVATE_PAYLOAD = 0x49
CMDID_GET_PAYLOAD_ACTITVATION_STATUS = 0x4a
CMDID_GET_PAYLOAD_INSTANCE_INFO = 0x4b
CMDID_SET_USER_PAYLOAD_ACCESS = 0x4c
CMDID_GET_USER_PAYLOAD_ACCESS = 0x4d
CMDID_GET_CHANNEL_PAYLOAD_SUPPORT = 0x4e
CMDID_GET_CHANNEL_PAYLOAD_VERSION = 0x4f
CMDID_GET_CHANNEL_OEM_PAYLOAD_INFO = 0x50
CMDID_MASTER_WRITE_READ = 0x52
CMDID_GET_CHANNEL_CIPHER_SUITES = 0x54
CMDID_SUSPEND_RESUME_PAYLOAD_ENCRYPTION = 0x55
CMDID_SET_CHANNEL_SECURITY_KEYS = 0x56
CMDID_GET_SYSTEM_INTERFACE_CAPABILITIES = 0x57
CMDID_SET_SYSTEM_INFO_PARAMETERS = 0x58
CMDID_GET_SYSTEM_INFO_PARAMETERS = 0x59
# chassis device .. NetFn Chassis
CMDID_GET_CHASSIS_CAPABILITIES = 0x00
CMDID_GET_CHASSIS_STATUS = 0x01
CMDID_CHASSIS_CONTROL = 0x02
CMDID_CHASSIS_RESET = 0x03
CMDID_CHASSIS_IDENTIFY = 0x04
CMDID_SET_CHASSIS_CAPABILITIES = 0x05
CMDID_SET_POWER_RESTORE_POLICY = 0x06
CMDID_GET_SYSTEM_RESTART_CAUSE = 0x07
CMDID_SET_SYSTEM_BOOT_OPTIONS = 0x08
CMDID_GET_SYSTEM_BOOT_OPTIONS = 0x09
CMDID_GET_POH_COUNTER = 0x0f
# event .. NetFn S/E
CMDID_SET_EVENT_RECEIVER = 0x00
CMDID_GET_EVENT_RECEIVER = 0x01
CMDID_PLATFORM_EVENT = 0x02
# PEF and alerting .. NetFn S/E
CMDID_GET_PEF_CAPABILITIES = 0x10
CMDID_ARM_PEF_POSTPONE_TIMER = 0x11
CMDID_SET_PEFCONFIGURATION_PARAMETERS = 0x12
CMDID_GET_PEFCONFIGURATION_PARAMETERS = 0x13
CMDID_SET_LAST_PROCESSED_EVENT_ID = 0x14
CMDID_GET_LAST_PROCESSED_EVENT_ID = 0x15
CMDID_ALERT_IMMEDIATE = 0x16
CMDID_PET_ACKNOWLEDGE = 0x17
# sensor device .. NetFn S/E
CMDID_GET_DEVICE_SDR_INFO = 0x20
CMDID_GET_DEVICE_SDR = 0x21
CMDID_RESERVE_DEVICE_SDR_REPOSITORY = 0x22
CMDID_GET_SENSOR_READING_FACTOR = 0x23
CMDID_SET_SENSOR_HYSTERESIS = 0x24
CMDID_GET_SENSOR_HYSTERESIS = 0x25
CMDID_SET_SENSOR_THRESHOLD = 0x26
CMDID_GET_SENSOR_THRESHOLD = 0x27
CMDID_SET_SENSOR_EVENT_ENABLE = 0x28
CMDID_GET_SENSOR_EVENT_ENABLE = 0x29
CMDID_RE_ARM_SENSOR = 0x2a
CMDID_GET_SENSOR_EVENT_STATUS = 0x2b
CMDID_GET_SENSOR_READING = 0x2d
CMDID_SET_SENSOR_TYPE = 0x2e
CMDID_GET_SENSOR_TYPE = 0x2f
CMDID_SET_SENSOR_READING_AND_EVENT_STATUS = 0x30
# fru device .. NetFn Storage
CMDID_GET_FRU_INVENTORY_AREA_INFO = 0x10
CMDID_READ_FRU_DATA = 0x11
CMDID_WRITE_FRU_DATA = 0x12
# SDR device .. NetFn Storage
CMDID_GET_SDR_REPOSITORY_INFO = 0x20
CMDID_GET_SDR_REPOSITORY_ALLOCATION_INFO = 0x21
CMDID_RESERVE_SDR_REPOSITORY = 0x22
CMDID_GET_SDR = 0x23
CMDID_ADD_SDR = 0x24
CMDID_PARTIAL_ADD_SDR = 0x25
CMDID_DELETE_SDR = 0x26
CMDID_CLEAR_SDR_REPOSITORY = 0x27
CMDID_GET_SDR_REPOSITORY_TIME = 0x28
CMDID_SET_SDR_REPOSITORY_TIME = 0x29
CMDID_ENTER_SDR_REPOSITORY_UPDATE_MODE = 0x2a
CMDID_EXIT_SDR_REPOSITORY_UPDATE_MODE = 0x2b
CMDID_RUN_INITIALIZATION_AGENT = 0x2c
# SEL device .. NetFn Storage
CMDID_GET_SEL_INFO = 0x40
CMDID_GET_SEL_ALLOCATION_INFO = 0x41
CMDID_RESERVE_SEL = 0x42
CMDID_GET_SEL_ENTRY = 0x43
CMDID_ADD_SEL_ENTRY = 0x44
CMDID_PARTIAL_ADD_SEL_ENTRY = 0x45
CMDID_DELETE_SEL_ENTRY = 0x46
CMDID_CLEAR_SEL = 0x47
CMDID_GET_SEL_TIME = 0x48
CMDID_SET_SEL_TIME = 0x49
CMDID_GET_AUXILIARY_LOG_STATUS = 0x5a
CMDID_SET_AUXILIARY_LOG_STATUS = 0x5b
CMDID_GET_SEL_TIME_UTC_OFFSET = 0x5c
CMDID_SET_SEL_TIME_UTC_OFFSET = 0x5d
# LAN device .. NetFn Transport
CMDID_SET_LAN_CONFIGURATION_PARAMETERS = 0x01
CMDID_GET_LAN_CONFIGURATION_PARAMETERS = 0x02
CMDID_SUSPEND_BMC_ARPS = 0x03
CMDID_GET_IP_UDP_RMCP_STATISTICS = 0x04
# Serial/Modem device .. NetFn Transport
# Command Forwarding .. NetFn Transport
# bridge management (ICMB) .. NetFn Bridge
# discovery (ICMB) .. NetFn Bridge
# bridging (ICMB) .. NetFn Bridge
# event (ICMB) .. NetFn Bridge
# other (ICMB) .. NetFn Bridge
# PICMG commands .. NetFn Group Extension (ID 0)
CMDID_GET_PICMG_PROPERTIES = 0x00
CMDID_GET_ADDRESS_INFO = 0x01
CMDID_GET_SHELF_ADDRESS_INFO = 0x02
CMDID_SET_SHELF_ADDRESS_INFO = 0x03
CMDID_FRU_CONTROL = 0x04
CMDID_GET_FRU_LED_PROPERTIES = 0x05
CMDID_GET_FRU_LED_COLOR_CAPABILITIES = 0x06
CMDID_SET_FRU_LED_STATE = 0x07
CMDID_GET_FRU_LED_STATE = 0x08
CMDID_SET_IPMB_STATE = 0x09
CMDID_SET_FRU_ACTIVATION_POLICY = 0x0a
CMDID_GET_FRU_ACTIVATION_POLICY = 0x0b
CMDID_SET_FRU_ACTIVATION = 0x0c
CMDID_GET_DEVLOC_RECORD_ID = 0x0d
CMDID_SET_PORT_STATE = 0x0e
CMDID_GET_PORT_STATE = 0x0f
CMDID_COMPUTE_POWER_PROPERTIES = 0x10
CMDID_SET_POWER_LEVEL = 0x11
CMDID_GET_POWER_LEVEL = 0x12
CMDID_RENEGOTIATE_POWER = 0x13
CMDID_GET_FAN_SPEED_PROPERTIES = 0x14
CMDID_SET_FAN_LEVEL = 0x15
CMDID_GET_FAN_LEVEL = 0x16
CMDID_BUSED_RESOURCE = 0x17
CMDID_GET_IPMB_LINK_INFO = 0x18
CMDID_GET_SHELF_MANAGER_IPMB_ADDRESS = 0x1b
CMDID_SET_FAN_POLICY = 0x1c
CMDID_GET_FAN_POLICY = 0x1d
CMDID_FRU_CONTROL_CAPABILITIES = 0x1e
CMDID_FRU_INVENTORY_DEVICE_LOCK_CONTROL = 0x1f
CMDID_FRU_INVENTORY_DEVICE_WRITE = 0x20
CMDID_GET_SHELF_MANAGER_IP_ADDRESSES = 0x21
CMDID_GET_SHELF_POWER_ALLOCATION = 0x22
CMDID_SET_CHANNEL_SIGNALING_CLASS = 0x3b
CMDID_GET_CHANNEL_SIGNALING_CLASS = 0x3c
# PICMG AdvancedMC .. NetFn Group Extension (ID 0)
CMDID_SET_AMC_PORT_STATE = 0x19
CMDID_GET_AMC_PORT_STATE = 0x1a
# PICMG MicroTCA .. NetFn Group Extension (ID 0)
CMDID_GET_LOCATION_INFO = 0x23
CMDID_POWER_CHANNEL_CONTROL = 0x24
CMDID_GET_POWER_CHANNEL_STATUS = 0x25
CMDID_PM_RESET = 0x26
CMDID_GET_PM_STATUS = 0x27
CMDID_PM_HEARTBEAT = 0x28
CMDID_GET_TELCO_ALARM_CAPABILITY = 0x29
CMDID_SET_TELCO_ALARM_STATE = 0x2a
CMDID_GET_TELCO_ALARM_STATE = 0x2b
# PICMG HPM.1 commands .. NetFn Group Extension (ID 0)
CMDID_HPM_GET_TARGET_UPGRADE_CAPABILITIES = 0x2e
CMDID_HPM_GET_COMPONENT_PROPERTIES = 0x2f
CMDID_HPM_ABORT_FIRMWARE_UPGRADE = 0x30
CMDID_HPM_INITIATE_UPGRADE_ACTION = 0x31
CMDID_HPM_UPLOAD_FIRMWARE_BLOCK = 0x32
CMDID_HPM_FINISH_FIRMWARE_UPLOAD = 0x33
CMDID_HPM_GET_UPGRADE_STATUS = 0x34
CMDID_HPM_ACTIVATE_FIRMWARE = 0x35
CMDID_HPM_QUERY_SELFTEST_RESULTS = 0x36
CMDID_HPM_QUERY_ROLLBACK_STATUS = 0x37
CMDID_HPM_INITIATE_MANUAL_ROLLBACK = 0x38
# PICMG HPM.2 commands .. NetFn Group Extension (ID 0)
CMDID_GET_LAN_ATTACH_CAPABILITIES = 0x3e
# VITA commands .. NetFn Group Extension (ID 0x03)
CMDID_VITA_GET_VSO_CAPABILITIES = 0x00
CMDID_VITA_GET_CHASSIS_ADDRESS_TABLE_INFO = 0x01
CMDID_VITA_GET_CHASSIS_IDENTIFIER = 0x02
CMDID_VITA_SET_CHASSIS_IDENTIFIER = 0x03
CMDID_VITA_FRU_CONTROL = 0x04
CMDID_VITA_GET_FRU_LED_PROPERTIES = 0x05
CMDID_VITA_GET_LED_COLOR_CAPABILITIES = 0x06
CMDID_VITA_SET_FRU_LED_STATE = 0x07
CMDID_VITA_GET_FRU_LED_STATE = 0x08
CMDID_VITA_SET_IPMB_STATE = 0x09
CMDID_VITA_SET_FRU_STATE_POLICY_BITS = 0x0a
CMDID_VITA_GET_FRU_STATE_POLICY_BITS = 0x0b
CMDID_VITA_SET_FRU_ACTIVATION = 0x0c
CMDID_VITA_GET_DEVICE_LOCATOR_RECORD_ID = 0x0d
CMDID_VITA_GET_FAN_SPEED_PROPERTIES = 0x14
CMDID_VITA_SET_FAN_LEVEL = 0x15
CMDID_VITA_GET_FAN_LEVEL = 0x16
CMDID_VITA_GET_IPMB_LINK_INFO = 0x18
CMDID_VITA_GET_CHASSIS_MANAGER_IPMB_ADDRESS = 0x1b
CMDID_VITA_SET_FAN_POLICY = 0x1c
CMDID_VITA_GET_FAN_POLICY = 0x1d
CMDID_VITA_FRU_CONTROL_CAPABILITIES = 0x1e
CMDID_VITA_FRU_INVENTROY_DEVICE_LOCK_CONTROL = 0x1f
CMDID_VITA_FRU_INVENTROY_DEVICE_WRITE = 0x20
CMDID_VITA_GET_CHASSIS_MANAGER_IP_ADDRESSES = 0x21
CMDID_VITA_GET_FRU_ADDRESS_INFO = 0x40
CMDID_VITA_GET_FRU_PERSISTENT_CONTROL = 0x41
CMDID_VITA_SET_FRU_PERSISTENT_CONTROL = 0x42
CMDID_VITA_FRU_PERSISTENT_CONTROL_CAPABILITIES = 0x43
CMDID_VITA_GET_MANDATORY_SENSOR_NUMBERS = 0x44
CMDID_VITA_GET_FRU_HASH = 0x45
CMDID_VITA_GET_PAYLOAD_MODE_CAPABILITIES = 0x46
CMDID_VITA_SET_PAYLOAD_MODE = 0x47
# DCMI commands .. NetFn Group Extension (ID 0xdc)
CMDID_GET_DCMI_CAPABILITIES_INFO = 0x01
CMDID_GET_POWER_READING = 0x02
CMDID_GET_POWER_LIMIT = 0x03
CMDID_SET_POWER_LIMIT = 0x04
CMDID_ACTIVATE_DEACTIVATE_POWER_LIMIT = 0x05
CMDID_GET_ASSET_TAG = 0x06
CMDID_GET_DCMI_SENSOR_INFO = 0x07
CMDID_SET_ASSET_TAG = 0x08
CMDID_GET_MANAGEMENT_CONTROLLER_ID_STRING = 0x09
CMDID_SET_MANAGEMENT_CONTROLLER_ID_STRING = 0x0a
# Command-specific completion codes. The key in this dictionary is a tuple
# (NetFn, Command ID, Group extension).
# The operation NetFn | 1 is here because it's the NetFn of an IPMI response.
CC_ERR_CMD_SPECIFIC_DESC = {
(NETFN_APP, CMDID_GET_SESSION_CHALLENGE, None): {
0x81: 'invalid user name',
0x82: 'null user name (User 1) not enabled',
},
(NETFN_APP, CMDID_ACTIVATE_SESSION, None): {
0x81: 'No session slot available (BMC cannot accept any more'
' sessions)',
0x82: 'No slot available for given user',
0x83: 'No slot available to support user due to maximum privilege'
' capability',
0x84: 'session sequence number out-of-range',
0x85: 'invalid Session ID in request',
0x86: 'requested maximum privilege level exceeds user and/or channel'
' privilege limit',
},
(NETFN_APP, CMDID_SET_SESSION_PRIVILEGE_LEVEL, None): {
0x80: "Requested level not available for this user",
0x81: "Requested level exceeds Channel and/or User Privilege Limit",
0x82: "Cannot disable User Level authentication",
},
(NETFN_APP, CMDID_SET_CHANNEL_ACCESS, None): {
0x82: "set not supported on selected channel (e.g. channel is session-"
"less.)",
0x83: "access mode not supported"
},
(NETFN_APP, CMDID_GET_CHANNEL_ACCESS, None): {
0x82: "Command not supported for selected channel (e.g. channel is"
"session-less.)"
},
(NETFN_APP, CMDID_SET_USER_PASSWORD, None): {
0x80: "password test failed. Password size correct, but"
"password data does not match stored value.",
0x81: "password test failed. Wrong password size was used."
},
(NETFN_TRANSPORT, CMDID_SET_LAN_CONFIGURATION_PARAMETERS, None): {
0x80: "parameter not supported.",
0x81: "attempt to set the 'set in progress' value (in parameter #0)"
"when not in the 'set complete' state. (This completion code"
"provides a way to recognize that another party has already"
"'claimed' the parameters)",
0x82: "attempt to write read-only parameter",
0x83: "attempt to read write-only parameter"
},
(NETFN_TRANSPORT, CMDID_GET_LAN_CONFIGURATION_PARAMETERS, None): {
0x80: "parameter not supported."
},
(NETFN_CHASSIS, CMDID_SET_SYSTEM_BOOT_OPTIONS, None): {
0x80: "parameter not supported.",
0x81: "attempt to set the 'set in progress' value (in parameter #0)"
"when not in the 'set complete' state. (This completion code"
"provides a way to recognize that another party has already"
"'claimed' the parameters)",
0x82: "attempt to write read-only parameter"
},
(NETFN_CHASSIS, CMDID_GET_SYSTEM_BOOT_OPTIONS, None): {
0x80: "parameter not supported:"
}
}
REPOSITORY_INITIATE_ERASE = 0xaa
REPOSITORY_GET_ERASE_STATUS = 0x00
REPOSITORY_ERASURE_IN_PROGRESS = 0x0
REPOSITORY_ERASURE_COMPLETED = 0x1