Showing 16 of 16 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
public function delete(int $job): JsonResponse
{
try {
$instance = $this->pheanstalk->peek(new JobId($job));
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public function kick(int $job): JsonResponse
{
try {
$instance = $this->pheanstalk->peek(new JobId($job));
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it('fetches the next ready job from the tube', function () {
$job = new PheanstalkJob(1, '::data::');
$this->mockPheanstalk->expects('useTube')->with('::tube::')->once()->andReturnSelf();
$this->mockPheanstalk->allows('peekReady')->andReturns($job);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it('fetches the next delayed job from the tube', function () {
$job = new PheanstalkJob(1, '::data::');
$this->mockPheanstalk->expects('useTube')->with('::tube::')->once()->andReturnSelf();
$this->mockPheanstalk->allows('peekDelayed')->andReturns($job);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
The method nextBuried has a boolean flag argument $withStats, which is a certain sign of a Single Responsibility Principle violation. Open
public function nextBuried(string $tube, bool $withStats = false): ?Job
- Read upRead up
- Exclude checks
BooleanArgumentFlag
Since: 1.4.0
A boolean flag argument is a reliable indicator for a violation of the Single Responsibility Principle (SRP). You can fix this problem by extracting the logic in the boolean flag into its own class or method.
Example
class Foo {
public function bar($flag = true) {
}
}
Source https://phpmd.org/rules/cleancode.html#booleanargumentflag
The method nextReady has a boolean flag argument $withStats, which is a certain sign of a Single Responsibility Principle violation. Open
public function nextReady(string $tube, bool $withStats = false): ?Job
- Read upRead up
- Exclude checks
BooleanArgumentFlag
Since: 1.4.0
A boolean flag argument is a reliable indicator for a violation of the Single Responsibility Principle (SRP). You can fix this problem by extracting the logic in the boolean flag into its own class or method.
Example
class Foo {
public function bar($flag = true) {
}
}
Source https://phpmd.org/rules/cleancode.html#booleanargumentflag
The method nextDelayed has a boolean flag argument $withStats, which is a certain sign of a Single Responsibility Principle violation. Open
public function nextDelayed(string $tube, bool $withStats = false): ?Job
- Read upRead up
- Exclude checks
BooleanArgumentFlag
Since: 1.4.0
A boolean flag argument is a reliable indicator for a violation of the Single Responsibility Principle (SRP). You can fix this problem by extracting the logic in the boolean flag into its own class or method.
Example
class Foo {
public function bar($flag = true) {
}
}
Source https://phpmd.org/rules/cleancode.html#booleanargumentflag
The method next has a boolean flag argument $withStats, which is a certain sign of a Single Responsibility Principle violation. Open
private function next(string $type, string $tube, bool $withStats = false): ?Job
- Read upRead up
- Exclude checks
BooleanArgumentFlag
Since: 1.4.0
A boolean flag argument is a reliable indicator for a violation of the Single Responsibility Principle (SRP). You can fix this problem by extracting the logic in the boolean flag into its own class or method.
Example
class Foo {
public function bar($flag = true) {
}
}
Source https://phpmd.org/rules/cleancode.html#booleanargumentflag
Avoid using static access to class '\Illuminate\Support\Facades\Artisan' in method 'retry'. Open
Artisan::call('queue:retry', [
'id' => [$failed],
]);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Illuminate\Support\Facades\Artisan' in method 'flush'. Open
Artisan::call('queue:forget', [
'id' => $row->id,
]);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Illuminate\Support\Facades\Artisan' in method 'forget'. Open
Artisan::call('queue:forget', [
'id' => $failed,
]);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid unused parameters such as '$tube'. Open
public function retry(string $tube, int $failed): JsonResponse
- Read upRead up
- Exclude checks
UnusedFormalParameter
Since: 0.2
Avoid passing parameters to methods or constructors and then not using those parameters.
Example
class Foo
{
private function bar($howdy)
{
// $howdy is not used
}
}
Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter
Avoid using static access to class '\Illuminate\Support\Arr' in method 'getStat'. Open
return Arr::get($this->stats, $name);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid unused parameters such as '$options'. Open
public function toJson($options = 0)
- Read upRead up
- Exclude checks
UnusedFormalParameter
Since: 0.2
Avoid passing parameters to methods or constructors and then not using those parameters.
Example
class Foo
{
private function bar($howdy)
{
// $howdy is not used
}
}
Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter
Avoid using static access to class '\Pheanstalk\Pheanstalk' in method 'register'. Open
return Pheanstalk::create(
config('beanstalkdui.host'),
config('beanstalkdui.port')
);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid unused parameters such as '$tube'. Open
public function forget(string $tube, int $failed): JsonResponse
- Read upRead up
- Exclude checks
UnusedFormalParameter
Since: 0.2
Avoid passing parameters to methods or constructors and then not using those parameters.
Example
class Foo
{
private function bar($howdy)
{
// $howdy is not used
}
}