if (options.templates && options.templates.engine == 'dust') {

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

    } else if (options.templates && options.templates.engine == 'react') {

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

    let TestApp = require(path);

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

    koa.use(require('./headers')(options.security));

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

    leaf.use(require('./body'));

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

    koa.use(require('koa-file-server')(options.fileServer));

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  return require("del")(["docs/jsdoc"], cb);

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  merge(response, require('./response'));

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  if (xframe == null) xframe = true;

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

    leaf.use(require('./controllers'));

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

    for (let name in this._services) {

Close

Require Guarding for-in (guard-for-in)

Looping over objects with a for in loop will include properties that are inherited through the prototype chain. This behavior can lead to unexpected items in your for loop.

for (key in foo) {
    doSomething(key);
}

Note that simply checking foo.hasOwnProperty(key) is likely to cause an error in some cases; see [no-prototype-builtins](no-prototype-builtins.md).

Rule Details

This rule is aimed at preventing unexpected behavior that could arise from using a for in loop without filtering the results in the loop. As such, it will warn when for in loops do not filter their results with an if statement.

Examples of incorrect code for this rule:

/*eslint guard-for-in: "error"*/

for (key in foo) {
    doSomething(key);
}

Examples of correct code for this rule:

/*eslint guard-for-in: "error"*/

for (key in foo) {
    if (Object.prototype.hasOwnProperty.call(foo, key)) {
        doSomething(key);
    }
    if ({}.hasOwnProperty.call(foo, key)) {
        doSomething(key);
    }
}

Related Rules

• [no-prototype-builtins](no-prototype-builtins.md)

Further Reading

• Exploring JavaScript for-in loops
• The pitfalls of using objects as maps in JavaScript Source: http://eslint.org/docs/rules/

    return this._config = config;

Close

Disallow Assignment in return Statement (no-return-assign)

One of the interesting, and sometimes confusing, aspects of JavaScript is that assignment can happen at almost any point. Because of this, an errant equals sign can end up causing assignment when the true intent was to do a comparison. This is especially true when using a return statement. For example:

function doSomething() {
    return foo = bar + 2;
}

It is difficult to tell the intent of the return statement here. It's possible that the function is meant to return the result of bar + 2, but then why is it assigning to foo? It's also possible that the intent was to use a comparison operator such as == and that this code is an error.

Because of this ambiguity, it's considered a best practice to not use assignment in return statements.

Rule Details

This rule aims to eliminate assignments from return statements. As such, it will warn whenever an assignment is found as part of return.

Options

The rule takes one option, a string, which must contain one of the following values:

• except-parens (default): Disallow assignments unless they are enclosed in parentheses.
• always: Disallow all assignments.

except-parens

This is the default option. It disallows assignments unless they are enclosed in parentheses.

Examples of incorrect code for the default "except-parens" option:

/*eslint no-return-assign: "error"*/

function doSomething() {
    return foo = bar + 2;
}

function doSomething() {
    return foo += 2;
}

Examples of correct code for the default "except-parens" option:

/*eslint no-return-assign: "error"*/

function doSomething() {
    return foo == bar + 2;
}

function doSomething() {
    return foo === bar + 2;
}

function doSomething() {
    return (foo = bar + 2);
}

always

This option disallows all assignments in return statements. All assignments are treated as problems.

Examples of incorrect code for the "always" option:

/*eslint no-return-assign: ["error", "always"]*/

function doSomething() {
    return foo = bar + 2;
}

function doSomething() {
    return foo += 2;
}

function doSomething() {
    return (foo = bar + 2);
}

Examples of correct code for the "always" option:

/*eslint no-return-assign: ["error", "always"]*/

function doSomething() {
    return foo == bar + 2;
}

function doSomething() {
    return foo === bar + 2;
}

When Not To Use It

If you want to allow the use of assignment operators in a return statement, then you can safely disable this rule. Source: http://eslint.org/docs/rules/

        process.exit(0);

Close

Disallow process.exit() (no-process-exit)

The process.exit() method in Node.js is used to immediately stop the Node.js process and exit. This is a dangerous operation because it can occur in any method at any point in time, potentially stopping a Node.js application completely when an error occurs. For example:

if (somethingBadHappened) {
    console.error("Something bad happened!");
    process.exit(1);
}

This code could appear in any module and will stop the entire application when somethingBadHappened is truthy. This doesn't give the application any chance to respond to the error. It's usually better to throw an error and allow the application to handle it appropriately:

if (somethingBadHappened) {
    throw new Error("Something bad happened!");
}

By throwing an error in this way, other parts of the application have an opportunity to handle the error rather than stopping the application altogether. If the error bubbles all the way up to the process without being handled, then the process will exit and a non-zero exit code will returned, so the end result is the same.

Rule Details

This rule aims to prevent the use of process.exit() in Node.js JavaScript. As such, it warns whenever process.exit() is found in code.

Examples of incorrect code for this rule:

/*eslint no-process-exit: "error"*/

process.exit(1);
process.exit(0);

Examples of correct code for this rule:

/*eslint no-process-exit: "error"*/

Process.exit();
var exit = process.exit;

When Not To Use It

There may be a part of a Node.js application that is responsible for determining the correct exit code to return upon exiting. In that case, you should turn this rule off to allow proper handling of the exit code. Source: http://eslint.org/docs/rules/

  merge(context, require('./context'));

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

    contents = require(dir + '/package.json');

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

    if (hash == null || hash === true) hash = 'sha256';

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

              function onEnd(chunk) {

Close

disallow variable or function declarations in nested blocks (no-inner-declarations)

In JavaScript, prior to ES6, a function declaration is only allowed in the first level of a program or the body of another function, though parsers sometimes erroneously accept them elsewhere. This only applies to function declarations; named or anonymous function expressions can occur anywhere an expression is permitted.

// Good
function doSomething() { }

// Bad
if (test) {
    function doSomethingElse () { }
}

function anotherThing() {
    var fn;

    if (test) {

        // Good
        fn = function expression() { };

        // Bad
        function declaration() { }
    }
}

A variable declaration is permitted anywhere a statement can go, even nested deeply inside other blocks. This is often undesirable due to variable hoisting, and moving declarations to the root of the program or function body can increase clarity. Note that block bindings (let, const) are not hoisted and therefore they are not affected by this rule.

/*eslint-env es6*/

// Good
var foo = 42;

// Good
if (foo) {
    let bar1;
}

// Bad
while (test) {
    var bar2;
}

function doSomething() {
    // Good
    var baz = true;

    // Bad
    if (baz) {
        var quux;
    }
}

Rule Details

This rule requires that function declarations and, optionally, variable declarations be in the root of a program or the body of a function.

Options

This rule has a string option:

• "functions" (default) disallows function declarations in nested blocks
• "both" disallows function and var declarations in nested blocks

functions

Examples of incorrect code for this rule with the default "functions" option:

/*eslint no-inner-declarations: "error"*/

if (test) {
    function doSomething() { }
}

function doSomethingElse() {
    if (test) {
        function doAnotherThing() { }
    }
}

Examples of correct code for this rule with the default "functions" option:

/*eslint no-inner-declarations: "error"*/

function doSomething() { }

function doSomethingElse() {
    function doAnotherThing() { }
}

if (test) {
    asyncCall(id, function (err, data) { });
}

var fn;
if (test) {
    fn = function fnExpression() { };
}

both

Examples of incorrect code for this rule with the "both" option:

/*eslint no-inner-declarations: ["error", "both"]*/

if (test) {
    var foo = 42;
}

function doAnotherThing() {
    if (test) {
        var bar = 81;
    }
}

Examples of correct code for this rule with the "both" option:

/*eslint no-inner-declarations: "error"*/
/*eslint-env es6*/

var bar = 42;

if (test) {
    let baz = 43;
}

function doAnotherThing() {
    var baz = 81;
}

When Not To Use It

The function declaration portion rule will be rendered obsolete when block-scoped functions land in ES6, but until then, it should be left on to enforce valid constructions. Disable checking variable declarations when using [block-scoped-var](block-scoped-var.md) or if declaring variables in nested blocks is acceptable despite hoisting. Source: http://eslint.org/docs/rules/

    koa.use(require('./trace')());

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/