MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD031 - Fenced code blocks should be surrounded by blank lines

Tags: code, blank_lines

Aliases: blanks-around-fences

This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:

Some text
```
Code block
```

```
Another code block
```
Some more text

To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

```
Code block
```

```
Another code block
```

Some more text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD031 - Fenced code blocks should be surrounded by blank lines

Tags: code, blank_lines

Aliases: blanks-around-fences

This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:

Some text
```
Code block
```

```
Another code block
```
Some more text

To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

```
Code block
```

```
Another code block
```

Some more text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.

MD032 - Lists should be surrounded by blank lines

Tags: bullet, ul, ol, blank_lines

Aliases: blanks-around-lists

This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:

Some text
* Some
* List

1. Some
2. List
Some text

To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

* Some
* List

1. Some
2. List

Some text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.

Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:

* This is
not okay

* This is
  okay

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD034 - Bare URL used

Tags: links, url

Aliases: no-bare-urls

This rule is triggered whenever a URL is given that isn't surrounded by angle brackets:

For more information, see http://www.example.com/.

To fix this, add angle brackets around the URL:

For more information, see <http:></http:>.

Rationale: Without angle brackets, the URL isn't converted into a link in many markdown parsers.

Note: if you do want a bare URL without it being converted into a link, enclose it in a code block, otherwise in some markdown parsers it will be converted:

`http://www.example.com`

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD032 - Lists should be surrounded by blank lines

Tags: bullet, ul, ol, blank_lines

Aliases: blanks-around-lists

This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:

Some text
* Some
* List

1. Some
2. List
Some text

To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

* Some
* List

1. Some
2. List

Some text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.

Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:

* This is
not okay

* This is
  okay

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD022 - Headers should be surrounded by blank lines

Tags: headers, blank_lines

Aliases: blanks-around-headers

This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:

# Header 1
Some text

Some more text
## Header 2

To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):

# Header 1

Some text

Some more text

## Header 2

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.

MD031 - Fenced code blocks should be surrounded by blank lines

Tags: code, blank_lines

Aliases: blanks-around-fences

This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:

Some text
```
Code block
```

```
Another code block
```
Some more text

To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

```
Code block
```

```
Another code block
```

Some more text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD007 - Unordered list indentation

Tags: bullet, ul, indentation

Aliases: ul-indent

Parameters: indent (number; default 2)

This rule is triggered when list items are not indented by the configured number of spaces (default: 2).

Example:

* List item
   * Nested list item indented by 3 spaces

Corrected Example:

* List item
  * Nested list item indented by 2 spaces

Rationale (2 space indent): indenting by 2 spaces allows the content of a nested list to be in line with the start of the content of the parent list when a single space is used after the list marker.

Rationale (4 space indent): Same indent as code blocks, simpler for editors to implement. See http://www.cirosantilli.com/markdown-styleguide/#indented-lists for more information.

In addition, this is a compatibility issue with multi-markdown parsers, which require a 4 space indents. See http://support.markedapp.com/discussions/problems/21-sub-lists-not-indenting for a description of the problem.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD032 - Lists should be surrounded by blank lines

Tags: bullet, ul, ol, blank_lines

Aliases: blanks-around-lists

This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:

Some text
* Some
* List

1. Some
2. List
Some text

To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

* Some
* List

1. Some
2. List

Some text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.

Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:

* This is
not okay

* This is
  okay

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD012 - Multiple consecutive blank lines

Tags: whitespace, blank_lines

Aliases: no-multiple-blanks

This rule is triggered when there are multiple consecutive blank lines in the document:

Some text here


Some more text here

To fix this, delete the offending lines:

Some text here

Some more text here

Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD032 - Lists should be surrounded by blank lines

Tags: bullet, ul, ol, blank_lines

Aliases: blanks-around-lists

This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:

Some text
* Some
* List

1. Some
2. List
Some text

To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

* Some
* List

1. Some
2. List

Some text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.

Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:

* This is
not okay

* This is
  okay

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD010 - Hard tabs

Tags: whitespace, hard_tab

Aliases: no-hard-tabs

This rule is triggered by any lines that contain hard tab characters instead of using spaces for indentation. To fix this, replace any hard tab characters with spaces instead.

Example:

Some text

    * hard tab character used to indent the list item

Corrected example:

Some text

    * Spaces used to indent the list item instead

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD022 - Headers should be surrounded by blank lines

Tags: headers, blank_lines

Aliases: blanks-around-headers

This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:

# Header 1
Some text

Some more text
## Header 2

To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):

# Header 1

Some text

Some more text

## Header 2

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.