Line length Open
The use of custom ssh and telnet ports can be set through device settings misc tab, and can be passed on to oxidized with the following `vars_map`
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
lnms config:set oxidized.maps.ip.sysName.+ '{"match": "my-other.node", "value": "192.168.1.20"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
lnms config:set oxidized.maps.group.purpose.+ '{"regex": "/^lon-sw/", "value": "london-network"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
lnms config:set oxidized.maps.group.location.+ '{"regex": "/london/", "value": "london-switches"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set oxidized.maps.myAttribute.os.+ '{"match": "routeros", "value": "Super cool value"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set oxidized.maps.group.hostname.+ '{"regex": "/^lon-sw/", "value": "london-switches"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
If you want to purge saved config of a device that is not in LibreNMS anymore, you can run the following command:
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Trailing spaces Open
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Trailing spaces Open
configuration will no longer be available via the LibreNMS web interface.
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Code block style Open
lnms config:set oxidized.maps.os.os.1 '{"match": "airos-af", "value": "something-else"}'
- Exclude checks
Headers should be surrounded by blank lines Open
## Remove disabled/removed device
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
lnms config:set oxidized.maps.ip.sysName.+ '{"regex": "/^my.node/", "value": "192.168.1.10"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
lnms config:set oxidized.maps.group.sysName.+ '{"regex": "/^lon-sw/", "value": "london-switches"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
To match on a device purpose or device notes that contains 'lon-net' then you would set the following:
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
lnms config:set oxidized.maps.group.notes.+ '{"regex": "/^lon-sw/", "value": "london-network"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set oxidized.maps.ssh_proxy.sysName.+ '{"regex": "/^my.node/", "value": "my-ssh-gateway.node"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.