MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD032 - Lists should be surrounded by blank lines

Tags: bullet, ul, ol, blank_lines

Aliases: blanks-around-lists

This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:

Some text
* Some
* List

1. Some
2. List
Some text

To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

* Some
* List

1. Some
2. List

Some text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.

Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:

* This is
not okay

* This is
  okay

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD001 - Header levels should only increment by one level at a time

Tags: headers

Aliases: header-increment

This rule is triggered when you skip header levels in a markdown document, for example:

# Header 1

### Header 3

We skipped out a 2nd level header in this document

When using multiple header levels, nested headers should increase by only one level at a time:

# Header 1

## Header 2

### Header 3

#### Header 4

## Another Header 2

### Another Header 3

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.