Trailing spaces Open
`lnms config:get` will fetch the current config settings (composite of database, config.php, and defaults).
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Line length Open
* `tos` (`fping`parameter `-O`): Set the type of service flag (TOS). Value can be either decimal or hexadecimal (0xh) format. Can be used to ensure that ping packets are queued in following QOS mecanisms in the network. Table is accessible in the [TOS Wikipedia page](https://en.wikipedia.org/wiki/Type_of_service).
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
You may enter any free-form text including one or more of the following template replacements:
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| Template | Replacement |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Inconsistent indentation for list items at the same level Open
1. Configure public key authentication from your LibreNMS server/poller by
- Read upRead up
- Exclude checks
MD005 - Inconsistent indentation for list items at the same level
Tags: bullet, ul, indentation
Aliases: list-indent
This rule is triggered when list items are parsed as being at the same level, but don't have the same indentation:
* Item 1
* Nested Item 1
* Nested Item 2
* A misaligned item
Usually this rule will be triggered because of a typo. Correct the indentation for the list to fix it:
* Item 1
* Nested Item 1
* Nested Item 2
* Nested Item 3
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Line length Open
lnms config:set login_message "Unauthorised access or use shall render the user liable to criminal and/or civil prosecution."
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set api.cors.allowheaders '["Origin", "X-Requested-With", "Content-Type", "Accept", "X-Auth-Token"]'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Code block style Open
lnms config:set ignore_mount.+ /kern
- Exclude checks
Line length Open
`lnms config:get` will fetch the current config settings (composite of database, config.php, and defaults).
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set snmp.version '["v2c", "v3", "v1"]' # Default versions to use
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set api.cors.exposeheaders '["Cache-Control", "Content-Language", "Content-Type", "Expires", "Last-Modified", "Pragma"]'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
`lnms config:set` will set the config setting in the database. Calling `lnms config:set` on a setting with no value will reset it to the default value.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
For example, if you create `resources/views/overview/custom/foobar.blade.php`, set `front_page` to `foobar`.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| `{{ $sysName_fallback }}` | The hostname or sysName if hostname is an IP |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Trailing spaces Open
#### **GeoCoordinates**
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Line length Open
# false- only check when adding host by ip.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Unordered list style Open
- `[]` contains optional Latitude and Longitude information if manual GeoCoordinate positioning is desired.
- Read upRead up
- Exclude checks
MD004 - Unordered list style
Tags: bullet, ul
Aliases: ul-style
Parameters: style ("consistent", "asterisk", "plus", "dash"; default "consistent")
This rule is triggered when the symbols used in the document for unordered list items do not match the configured unordered list style:
* Item 1
+ Item 2
- Item 3
To fix this issue, use the configured style for list items throughout the document:
* Item 1
* Item 2
* Item 3
Note: the configured list style can be a specific symbol to use (asterisk, plus, dash), or simply require that the usage be consistent within the document.
Unordered list style Open
- Info-keywords
- Read upRead up
- Exclude checks
MD004 - Unordered list style
Tags: bullet, ul
Aliases: ul-style
Parameters: style ("consistent", "asterisk", "plus", "dash"; default "consistent")
This rule is triggered when the symbols used in the document for unordered list items do not match the configured unordered list style:
* Item 1
+ Item 2
- Item 3
To fix this issue, use the configured style for list items throughout the document:
* Item 1
* Item 2
* Item 3
Note: the configured list style can be a specific symbol to use (asterisk, plus, dash), or simply require that the usage be consistent within the document.
Line length Open
To get a complete list of all the current values, you can use the command `lnms config:get --dump`. The output may not be desirable, so you can use the `jq` package to pretty print it. Then it would be `lnms config:get --dump | jq`.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set addhost_alwayscheckip false # true - check for duplicate ips even when adding host by name.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set snmp.exec_timeout 1200 # execution time limit in seconds
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set location_map_regex '{"/Sink/": "Under The Sink, The Office, London, UK"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Headers should be surrounded by blank lines Open
## CLI
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Headers should be surrounded by blank lines Open
#### Misc binaries
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
When installing LibreNMS for the first time with a new database you can place yaml key value files
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| `{{ $sysName }}` | The SNMP sysName of the device, falls back to hostname/IP if missing |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set snmp.retries 5 # how many times to retry the query
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
- `[]` contains optional Latitude and Longitude information if manual GeoCoordinate positioning is desired.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Headers should be surrounded by blank lines Open
#### **GeoCoordinates**
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Inconsistent indentation for list items at the same level Open
1. (xen+ssh only) Enable libvirtd to gather data from xend by setting
- Read upRead up
- Exclude checks
MD005 - Inconsistent indentation for list items at the same level
Tags: bullet, ul, indentation
Aliases: list-indent
This rule is triggered when list items are parsed as being at the same level, but don't have the same indentation:
* Item 1
* Nested Item 1
* Nested Item 2
* A misaligned item
Usually this rule will be triggered because of a typo. Correct the indentation for the list to fix it:
* Item 1
* Nested Item 1
* Nested Item 2
* Nested Item 3
Line length Open
Database: This applies to all pollers and can be set with either `lnms config:set` or in the Web UI. Database config takes precedence over config.php.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
For example, `{{ $sysName_fallback }} ({{ $ip }})` will display something like `server (192.168.1.1)`
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
LibreNMS can interpret sysLocation information and map the device loction based on GeoCoordinates or GeoCoding information.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set location_map '{"Under the Sink": "Under The Sink, The Office, London, UK"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set location_map_regex_sub '{"/Sink/": "Under The Sink, The Office, London, UK [lat, long]"}'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Multiple headers with the same content Open
## Authentication
- Read upRead up
- Exclude checks
MD024 - Multiple headers with the same content
Tags: headers
Aliases: no-duplicate-header
Parameters: allowdifferentnesting (boolean; default false)
This rule is triggered if there are multiple headers in the document that have the same text:
# Some text
## Some text
To fix this, ensure that the content of each header is different:
# Some text
## Some more text
Rationale: Some markdown parses generate anchors for headers based on the header name, and having headers with the same content can cause problems with this.
If the parameter allow_different_nesting
is set to true
, header duplication
under different nesting is allowed, like it usually happens in change logs:
# Change log
## 2.0.0
### Bug fixes
### Features
## 1.0.0
### Bug fixes
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Emphasis used instead of a header Open
**Various bad_if\* selection options available**
- Read upRead up
- Exclude checks
MD036 - Emphasis used instead of a header
Tags: headers, emphasis
Parameters: punctuation (string; default ".,;:!?")
Aliases: no-emphasis-as-header
This check looks for instances where emphasized (i.e. bold or italic) text is used to separate sections, where a header should be used instead:
**My document**
Lorem ipsum dolor sit amet...
_Another section_
Consectetur adipiscing elit, sed do eiusmod.
To fix this, use markdown headers instead of emphasized text to denote sections:
# My document
Lorem ipsum dolor sit amet...
## Another section
Consectetur adipiscing elit, sed do eiusmod.
Note: this rule looks for single line paragraphs that consist entirely of emphasized text. It won't fire on emphasis used within regular text, multi-line emphasized paragraphs, and paragraphs ending in punctuation. Similarly to rule MD026, you can configure what characters are recognized as punctuation.
Line length Open
lnms config:set summary_errors false # Show Errored ports in summary boxes on the dashboard
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Unordered list style Open
- `()` contains optional information that is ignored during GeoCoding lookups.
- Read upRead up
- Exclude checks
MD004 - Unordered list style
Tags: bullet, ul
Aliases: ul-style
Parameters: style ("consistent", "asterisk", "plus", "dash"; default "consistent")
This rule is triggered when the symbols used in the document for unordered list items do not match the configured unordered list style:
* Item 1
+ Item 2
- Item 3
To fix this issue, use the configured style for list items throughout the document:
* Item 1
* Item 2
* Item 3
Note: the configured list style can be a specific symbol to use (asterisk, plus, dash), or simply require that the usage be consistent within the document.
Line length Open
1. You can overwrite each device sysLocation information in the webGUI under "Device settings".
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```yaml
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
| `{{ $ip }}` | The actual polled IP of the device, will not display a hostname |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
Next it will attempt to look up the sysLocation with a map engine provided you have configured one under $config['geoloc']['engine']. The information has to be accurate or no result is returned, when it does it will ignore any information inside parentheses, allowing you to add details that would otherwise interfeeer with the lookup.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Lists should be surrounded by blank lines Open
1. You can overwrite each device sysLocation information in the webGUI under "Device settings".
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Line length Open
If this is set to true then an overview will be shown on the login page of devices and the status.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set customers_descr '["cust"]' # The description to look for in ifDescr. Can have multiple '["cust","cid"]'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set custom_descr '["This is Custom"]' # Add custom interface descriptions (array)
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
If device sysLocation information contains [lat, lng] (note the comma and square brackets), that is used to determin the GeoCoordinates.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Line length Open
config.php: This applies to the local poller only. Configs set here will be disabled in the Web UI to prevent unexpected behaviour.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set api.cors.allowheaders '["Origin", "X-Requested-With", "Content-Type", "Accept", "X-Auth-Token"]'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Trailing spaces Open
librenms@librenms:~$ lnms config:get --dump | jq
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Line length Open
| `{{ $hostname }}` | The hostname or IP of the device that was set when added *default |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
lnms config:set snmp.transports '["udp", "udp6", "tcp", "tcp6"]' # Transports to use
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Headers should be surrounded by blank lines Open
#### **GeoCoding**
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Line length Open
lnms config:set api.cors.exposeheaders '["Cache-Control", "Content-Language", "Content-Type", "Expires", "Last-Modified", "Pragma"]'
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Line length Open
>NOTE: This list of SNMP communities is used for auto discovery, and as a default set for any manually added device.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.