mibs/ericsson/XF-SOFTWARE-MIB
XF-SOFTWARE-MIB DEFINITIONS ::= BEGIN
IMPORTS
entPhysicalIndex
FROM ENTITY-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
Integer32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION
FROM SNMPv2-TC
xfPlatform, XfProductnumber, XfProductRevision
FROM XF-TOP-MIB;
-- 1.3.6.1.4.1.193.81.2.7
xfSoftwareMIB MODULE-IDENTITY
LAST-UPDATED "200803060000Z" -- March 06, 2008 at 00:00 GMT
ORGANIZATION
"Ericsson-Norway"
CONTACT-INFO
" "
DESCRIPTION
"This MIB contains the objects which support software
inventory information."
REVISION "200803051803Z" -- March 05, 2008 at 18:03 GMT
DESCRIPTION
"N : Removed BITS"
REVISION "200711261244Z" -- November 26, 2007 at 12:44 GMT
DESCRIPTION
"M Extended xfSwLmUpgradeOperStatus and
xfSwReleaseOperStatus with ftp error codes"
REVISION "200706110912Z" -- June 11, 2007 at 09:12 GMT
DESCRIPTION
" K added preparingForTest(9) to
xfSwGlobalState"
REVISION "200704100909Z" -- April 10, 2007 at 09:09 GMT
DESCRIPTION
"J Added extra value testingFromManual(8) to
xfSwReleaseOperStatus
Added xfSwGlobalState
"
REVISION "200306191030Z" -- June 19, 2003 at 10:30 GMT
DESCRIPTION
"D
Changed description of xfSwNpuPassiveSwitch
to state that a warm restart is required to
activate the fallback
Added noFailure(3) to
xfSwLoadModuleFailure"
REVISION "200203080841Z" -- March 08, 2002 at 08:41 GMT
DESCRIPTION
"C
Changed contact info
Added one state to the xfSWBoardStatus
Added objects for multiple load modules
per board and type of the load module.
"
REVISION "200201140911Z" -- January 14, 2002 at 09:11 GMT
DESCRIPTION
"B write to xfSwReleaseAdminStatus
for active release has no effect
Added conformance
Change syntax for product number
and revision
Change name to xfSwBoardStatus"
REVISION "200110101215Z" -- October 10, 2001 at 12:15 GMT
DESCRIPTION
"A Initial Revision"
REVISION "200401301351Z" -- January 30, 2004 at 13:51 GMT
DESCRIPTION
"E Added objects for progress indication,
Better fault indication.
New release handling."
REVISION "200408030823Z" -- August 03, 2004 at 08:23 GMT
DESCRIPTION
"F due to new scope in Neptune
removed ..AdditionalInfo,
xfSwLmUpgradeNewProductNumber and
xfSwLmUpgrade/xfSwLoadModuleDescription.
added xfSwReleaseSBLType and
xfBoardTrafficDisturbance
changed the values of xfSwLmUpgradeOper and
AdminStatus. Removed not used values and
removed 'holes' in the enum values."
REVISION "200501310826Z" -- January 31, 2005 at 08:26 GMT
DESCRIPTION
"G Added xfSwLoadModuleDescription,
minSoftwareRevision(5)to xfSwBoardStatus
and xfSuLmUpgradeDescription"
REVISION "200502090813Z" -- February 09, 2005 at 08:13 GMT
DESCRIPTION
"H reintroduced xfSwBoardLoadModuleIndex as index"
::= { xfPlatform 7 }
--
-- Textual conventions
--
-- Textual conventions
--
--
--
XfSwRelease ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indication of one of the two software releases."
SYNTAX Integer32 (1..2)
XfSwEnableDisable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC is used for objects that can have these values."
SYNTAX INTEGER
{
enable(1),
disable(2)
}
--
-- Node definitions
--
-- Node definitions
--
-- 1.3.6.1.4.1.193.81.2.7.1
xfSwObjects OBJECT IDENTIFIER ::= { xfSoftwareMIB 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.1
xfSwLoadModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfSwLoadModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the load modules
that are part of the system releases as described by
the xfSwReleaseTable."
::= { xfSwObjects 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.1.1
xfSwLoadModuleEntry OBJECT-TYPE
SYNTAX XfSwLoadModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 1 software load module."
INDEX { xfSwRelease, xfSwLoadModuleIndex }
::= { xfSwLoadModuleTable 1 }
XfSwLoadModuleEntry ::=
SEQUENCE {
xfSwRelease
XfSwRelease,
xfSwLoadModuleIndex
Integer32,
xfSwLoadModuleProductNumber
XfProductnumber,
xfSwLoadModuleRevision
XfProductRevision,
xfSwLoadModuleOperStatus
INTEGER,
xfSwLoadModuleFailure
INTEGER,
xfSwLoadModuleProgress
Integer32,
xfSwLoadModuleDescription
SnmpAdminString
}
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.1
xfSwRelease OBJECT-TYPE
SYNTAX XfSwRelease
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"There are two software releases present on the node:
- an active release, normally the most recent release
and the one that is running
- a passive release, that is the previous release or
the one that is currently being download to upgrade
the active release.
xfSwRelease is an index into the active or passive
release. xfSwActiveRelease indicates which release is
active."
::= { xfSwLoadModuleEntry 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.2
xfSwLoadModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique value within one release for each load module."
::= { xfSwLoadModuleEntry 2 }
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.3
xfSwLoadModuleProductNumber OBJECT-TYPE
SYNTAX XfProductnumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Product number of the load module. Normally something
like 'CAXR102_012/1'."
::= { xfSwLoadModuleEntry 3 }
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.4
xfSwLoadModuleRevision OBJECT-TYPE
SYNTAX XfProductRevision
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision of the load module. Normally something like
'R1A'."
::= { xfSwLoadModuleEntry 4 }
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.5
xfSwLoadModuleOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
passive(1),
upgradeStarted(2),
upgradeFinished(3),
upgradeFailed(4),
upgradeAborted(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the software upgrade process
for this load module.
passive(1)
the load module is not involved in a upgrade
process and is not active. I.e.it is part of
the previous software release.
upgradeStarted(2)
a load module will have this status directly
after the SBDF info for this module is loaded
and the xfSwLoadModuleAdminStatus of the
release was set to upgradeStarted.
upgradeFinished(3)
indicates that this load modules has been retrieved
and burned into the flash memories. This is the state
of load modules that are part of an active release.
upgradeFailed(4)
upgraded has failed for a reason, e.g. file transfer
checksum was wrong, see xfSwLoadModuleFailure.
upgradeAborted(5)
when the manager has aborted the upgrade of the
complete release whilst this load module wasn't
upgradedFinished yet this will be its status.
"
::= { xfSwLoadModuleEntry 5 }
--
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.6
xfSwLoadModuleFailure OBJECT-TYPE
SYNTAX INTEGER
{
downloadFailure(1),
programFailure(2),
noFailure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The objects specifies the cause of a software upgrade
failure for this load module. "
::= { xfSwLoadModuleEntry 6 }
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.8
xfSwLoadModuleProgress OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the progress in downloading
the respective load module when part of an upgrade
of an NE to a software baseline."
::= { xfSwLoadModuleEntry 8 }
-- 1.3.6.1.4.1.193.81.2.7.1.1.1.9
xfSwLoadModuleDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates a textual
description of the load module, indicating PIU type
as stated by the entPhysicalDescription MO."
::= { xfSwLoadModuleEntry 9 }
-- 1.3.6.1.4.1.193.81.2.7.1.2
xfSwReleaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfSwReleaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This contains the information on the active and passive
software releases."
::= { xfSwObjects 2 }
-- 1.3.6.1.4.1.193.81.2.7.1.2.1
xfSwReleaseEntry OBJECT-TYPE
SYNTAX XfSwReleaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a software release. There are always
only two releases. For the active release write is
possible but will have no impact and will result in a
inconsistentValue error response."
INDEX { xfSwReleaseIndex }
::= { xfSwReleaseTable 1 }
XfSwReleaseEntry ::=
SEQUENCE {
xfSwReleaseIndex
XfSwRelease,
xfSwReleaseProductNumber
XfProductnumber,
xfSwReleaseRevision
XfProductRevision,
xfSwReleaseAdminStatus
INTEGER,
xfSwReleaseOperStatus
INTEGER,
xfSwReleaseSBLType
INTEGER
}
-- 1.3.6.1.4.1.193.81.2.7.1.2.1.1
xfSwReleaseIndex OBJECT-TYPE
SYNTAX XfSwRelease
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Release the info for which this row is
applicable."
::= { xfSwReleaseEntry 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.2.1.2
xfSwReleaseProductNumber OBJECT-TYPE
SYNTAX XfProductnumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Product number of the installed software package in
this release. Normally something like 'CAXR102 012/1'.
For the active release this is a read-only object."
::= { xfSwReleaseEntry 2 }
-- 1.3.6.1.4.1.193.81.2.7.1.2.1.3
xfSwReleaseRevision OBJECT-TYPE
SYNTAX XfProductRevision
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Revision of the installed software package in this
Release. Normally something like 'R1A'.
For the active release this is a read-only object."
::= { xfSwReleaseEntry 3 }
-- 1.3.6.1.4.1.193.81.2.7.1.2.1.4
xfSwReleaseAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
upgradeStarted(1),
upgradeAborted(2),
activeAndRunning(5),
upgradeTest(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the desired status for this release. To start
a software upgrade the manager has to set
xfSwReleaseProductNumber and xfSwReleaseRevision. After
that it will set this object to upgradeStarted. Which
will lead to downloading the SBDF-file from the FTP
Server.
For the active release this is a read-only object."
::= { xfSwReleaseEntry 4 }
-- 1.3.6.1.4.1.193.81.2.7.1.2.1.5
xfSwReleaseOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
passive(1),
upgradeStarted(2),
upgradeFinished(3),
testing(4),
upgradeFailed(5),
upgradeAborted(6),
running(7),
testingFromManual(8),
errorInternal(50),
errorFileStorage(51),
ftpPingFailed(52),
ftpNoAccess(53),
ftpConnectionDetailsMissing(54),
ftpConnectionDetailsInvalid(55),
ftpConnectionTimeout(56),
ftpNoSuchRemoteFile(57),
ftpNoSuchRemoteDir(58),
ftpServiceNotAvailable(421),
ftpUnableToOpenDataConnection(425),
ftpConnectionClosed(426),
ftpFileBusy(450),
ftpLocalError(451),
ftpInsufficientStorageSpace(452),
ftpSyntaxError(501),
ftpCommandNotImplemented(502),
ftpBadSequenceCommands(503),
ftpParameterNotImplemented(504),
ftpNoLoggedIn(530),
ftpNeedAccount(532),
ftpFileUnavailable(550),
ftpExceededStorageAllocation(552),
ftpFileNameNotAllowed(553)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of this release.
passive(1)
release not involved in upgrade and currently not
running.
upgradeStarted(2)
the release is in the process of being upgraded
upgradeFinished(3)
All load modules of the release are downloaded and
burned in the respective flash memories.
testing(4)
This release is running as test and not committed yet.
upgradeFailed(5)
The upgrade to this release failed, e.g. due to FTP
server failure.
upgradeAborted(6)
The manager has order to abort the upgrade to this
release.
running(7)
This is the release that is running now and all new
boards should upgrade to.
testingFromManual(8)
Same as value testing(4) but indicating that this a test phase
after a SBL from Manual mode. As such a fall-back will result in manual mode,
i.e. no SBL.
The 50 series errors are reported by the FTP client on
the node.
errorInternalError(50)
An internal error detected before FTP operation.
errorFileStorage(51)
Error when erasing flash to store the downloaded
file at the node.
ftpPingFailed(52)
FTP ping failed.
ftpNoAccess(53)
Not able to send the FTP commands.
ftpConnectionDetailsMissing(54)
FTP connection details are missing.
ftpConnectionDetailsInvalid(55)
FTP connection details are invalid.
ftpConnectionTimeout(56)
FTP connection timeout is detected.
ftpNoSuchRemoteFile(57)
No such remote file exists.
ftpNoSuchRemoteDir(58)
No such remote directory exists.
The 400 series errors occur when the command was not accepted
and the requested action did not take place, but the error
condition is temporary and the action may be requested again.
ftpServiceNotAvailable(421)
Service not available, closing control connection. This
may be a reply to any command if the service knows it
must shut down. Possible causes are transfer timeouts
and/or FTP server resets.
ftpUnableToOpenDataConnection(425)
Can't open data connection. Try changing from PASV to
PORT mode.
ftpConnectionClosed(426)
Connection closed and file transfer is aborted. Possible
causes are out of local diskspace and loss of connection.
ftpFileBusy(450)
Requested file action not taken. File
unavailable (e.g file busy).
ftpLocalError(451)
Requested action aborted due to local error in processing.
ftpInsufficienStorageSpace(452)
Requested action not taken due to insufficient
storage space on the server.
The 500 series errors occur when the command was not accepted
and the requested action did not take place.
ftpSyntaxError(501)
FTP Syntax error in parameters or arguments.
ftpCommandNotImplemented(502)
FTP Command not implemented.
ftpBadSequenceCommands(503)
Bad sequence of the FTP commands.
ftpParameterNotImplemented(504)
FTP command not implemented for that parameter.
ftpNotLoggedIn(530)
Not logged in. Your username and/or password is being
rejected, contact the server adminstrator.
ftpNeedAccount(532)
Need account for storing files.
ftpFileUnavailable(550)
Requested action not taken. File unavailable
(e.g.file not found, no access). Contact the server
adminstrator.
ftpExceededStorageAllocation(552)
Requested file action aborted.Exceeded storage allocation (for
current directory or data set). Contact the server adminstrator.
ftpFileNameNotAllowed(553)
Requested action not taken. File name not allowed. Try changing
the file name or getting rid of spaces in the file name."
::= { xfSwReleaseEntry 5 }
-- 1.3.6.1.4.1.193.81.2.7.1.2.1.6
xfSwReleaseSBLType OBJECT-TYPE
SYNTAX INTEGER
{
definedByEricsson(1),
definedByOperator(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the SBL information in
the SBDF is generated by Ericsson or by an operator.
This is based on a check of the SBDF.
Of course this will only be a reliable object when the
software can distinguish between Ericsson and operator
defined SBDFs, i.e. upgrading from R2A."
::= { xfSwReleaseEntry 6 }
-- 1.3.6.1.4.1.193.81.2.7.1.3
xfSwActiveRelease OBJECT-TYPE
SYNTAX XfSwRelease
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates which of the two Releases is active at the
moment, i.e. active is the software actually running."
::= { xfSwObjects 3 }
-- 1.3.6.1.4.1.193.81.2.7.1.4
xfSwBootTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates when the XF NE will warm restart to test the
new software release. If all fields have value 0 an
immediate boot will be performed."
::= { xfSwObjects 4 }
-- 1.3.6.1.4.1.193.81.2.7.1.5
xfSwCommitType OBJECT-TYPE
SYNTAX INTEGER
{
operatorCommit(1),
nodeCommit(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In case of a scheduled restart, i.e. valid date and
time in xfSwBootTime, two different commit procedures
can be followed:
operatorCommit(1)
The manager commits the software release
under test by setting the xfSwRelease-
AdminState to activeAndRunning.
nodeCommit(2)
The release under test is accepted when
the node is able to establish contact
through the DCN with an external IP-address.
Default values is operatorCommit(1)."
::= { xfSwObjects 5 }
-- 1.3.6.1.4.1.193.81.2.7.1.6
xfSwBoardTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfSwBoardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information about software present
on the boards in the XF-NE. Boards without software will
not be in this table."
::= { xfSwObjects 6 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1
xfSwBoardEntry OBJECT-TYPE
SYNTAX XfSwBoardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { entPhysicalIndex, xfSwLoadModuleIndex }
::= { xfSwBoardTable 1 }
XfSwBoardEntry ::=
SEQUENCE {
xfSwBoardLoadModuleIndex
Integer32,
xfSwBoardLoadModuleType
OBJECT IDENTIFIER,
xfSwBoardProductNumber
XfProductnumber,
xfSwBoardRevision
XfProductRevision,
xfSwBoardStatus
INTEGER,
xfSwBoardSuProgress
Integer32,
xfSwBoardMinProductNumber
XfProductnumber,
xfSwBoardMinRevision
XfProductRevision,
xfSwBoardTrafficDisturbance
INTEGER
}
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.1
xfSwBoardLoadModuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to the load module on the board. A board may
contain more than one load module.
"
::= { xfSwBoardEntry 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.2
xfSwBoardLoadModuleType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object indicates of what type the software is,
like DP (Device Processor) or FPGA (Field Programmable
Gate Array) or another type. New type can be defined by
defining a new OID in a other MIB.
"
::= { xfSwBoardEntry 2 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.3
xfSwBoardProductNumber OBJECT-TYPE
SYNTAX XfProductnumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string indicating the product number of the
software in the active flash memory.
"
::= { xfSwBoardEntry 3 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.4
xfSwBoardRevision OBJECT-TYPE
SYNTAX XfProductRevision
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string indicating the revision of the
software in the active flash memory."
::= { xfSwBoardEntry 4 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.5
xfSwBoardStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
active(2),
upgrading(3),
wrongSoftware(4),
minSoftwareRevision(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the software on the board:
Unknown(1)
The status of the software is unknown for example
at startup.
Active(2)
Software on the board is OK and running
Upgrading(3)
Software is in the process of being upgraded
WrongSoftware(4)
Wrong software on the board and for some reason
not being upgraded yet.
MinSoftware revision(5)
The board was tried to downgrade to a software revision that
is not compatible with the hardware.
The xfSwBoardStatus is only of use in case version control is
enabled. If version control is not enabled the unit will always
runs its software."
::= { xfSwBoardEntry 5 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.6
xfSwBoardSuProgress OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the progress of the software
upgrade process for each individual PIU. This indicates
both flash erasing and programming.
This object indicates this for both upgrade to a
baseline as well as for inserted PIUs.
In case the software upgrade of the board takes less
than 10 seconds this objects will directly go to 100%."
::= { xfSwBoardEntry 6 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.7
xfSwBoardMinProductNumber OBJECT-TYPE
SYNTAX XfProductnumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string indicating the product number of the
minimally acceptable software revision for this unit
type/variant.
"
::= { xfSwBoardEntry 7 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.8
xfSwBoardMinRevision OBJECT-TYPE
SYNTAX XfProductRevision
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string indicating the revision of the
minimally acceptable software revision for this unit
type/variant."
::= { xfSwBoardEntry 8 }
-- 1.3.6.1.4.1.193.81.2.7.1.6.1.9
xfSwBoardTrafficDisturbance OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
disturbing(2),
notDisturbing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that software upgrade of this
load module on this unit might lead to traffic
disturbance. This could for example happen in the
exceptional case where the load module includes FPGA
code for the traffic system."
::= { xfSwBoardEntry 9 }
-- 1.3.6.1.4.1.193.81.2.7.1.7
xfSwNpuObjects OBJECT IDENTIFIER ::= { xfSwObjects 7 }
-- Software related objects specific for NPU. The NPU is the only PIU
-- for which the passive memory bank is of interest to external
-- management, since a fall-back to it can be performed.
--
-- 1.3.6.1.4.1.193.81.2.7.1.7.1
xfSwNpuPassiveProductNumber OBJECT-TYPE
SYNTAX XfProductnumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Product number of NPU software in passive bank."
::= { xfSwNpuObjects 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.7.2
xfSwNpuPassiveRevision OBJECT-TYPE
SYNTAX XfProductRevision
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision of software in passive bank on NPU."
::= { xfSwNpuObjects 2 }
-- 1.3.6.1.4.1.193.81.2.7.1.7.3
xfSwNpuPassiveSwitch OBJECT-TYPE
SYNTAX INTEGER { switch(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be used to switch the NPU passive
software.
As a safety precaution this object is
only available when the node is in installation mode
or when the node is accessed through the USB port
(if present).
A warm restart is required to activate the fallback.
A switch leads to all xfSwUpgradePreferences being set
to their default values, i.e. no version control."
::= { xfSwNpuObjects 3 }
-- 1.3.6.1.4.1.193.81.2.7.1.8
xfSwLoadModuleTypes OBJECT IDENTIFIER ::= { xfSwObjects 8 }
-- The following software types where known at time of definition
-- of this MIB.
--
-- 1.3.6.1.4.1.193.81.2.7.1.8.1
xfDeviceProcessorSoftware OBJECT-IDENTITY
STATUS obsolete
DESCRIPTION
"Used for DP software load modules."
::= { xfSwLoadModuleTypes 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.8.2
xfPciFpgaCode OBJECT-IDENTITY
STATUS obsolete
DESCRIPTION
"Used for PCI FPGA load modules."
::= { xfSwLoadModuleTypes 2 }
-- 1.3.6.1.4.1.193.81.2.7.1.9
xfSwUpgradePreferences OBJECT IDENTIFIER ::= { xfSwObjects 9 }
-- These objects are used to configure the software
-- upgrade process, i.e. all from only informing to
-- total control.
--
-- 1.3.6.1.4.1.193.81.2.7.1.9.1
xfSwVersionControl OBJECT-TYPE
SYNTAX XfSwEnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable version control.
Default: disable."
::= { xfSwUpgradePreferences 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.9.2
xfSwAutoUpgrade OBJECT-TYPE
SYNTAX XfSwEnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable automatic software upgrade.
In case xfSwVersionControl is enabled a change of the
value will cause all PIUs to be checked again.
Default: disable."
::= { xfSwUpgradePreferences 2 }
-- 1.3.6.1.4.1.193.81.2.7.1.9.3
xfSwAutoDowngrade OBJECT-TYPE
SYNTAX XfSwEnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable automatic software downgrade.
In case xfSwVersionControl is enabled a change of the
value will cause all PIUs to be checked again.
Default: disable."
::= { xfSwUpgradePreferences 3 }
-- 1.3.6.1.4.1.193.81.2.7.1.9.4
xfSwAcceptFailure OBJECT-TYPE
SYNTAX XfSwEnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to enable/disable setting of new PIUs, that fail
to up/downgrade, in 'out of service'. PIUs that are
out of service will not be taken into service on the
disable/enable transistion.
Default: enable."
::= { xfSwUpgradePreferences 4 }
-- 1.3.6.1.4.1.193.81.2.7.1.10
xfSwLmUpgradeTable OBJECT-TYPE
SYNTAX SEQUENCE OF XfSwLmUpgradeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to upgrade a single load module. For
each known load module an entry is present."
::= { xfSwObjects 10 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1
xfSwLmUpgradeEntry OBJECT-TYPE
SYNTAX XfSwLmUpgradeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table."
INDEX { xfSwLmUpgradeIndex }
::= { xfSwLmUpgradeTable 1 }
XfSwLmUpgradeEntry ::=
SEQUENCE {
xfSwLmUpgradeIndex
Integer32,
xfSwLmUpgradeProductNumber
XfProductnumber,
xfSwLmUpgradeRevision
XfProductRevision,
xfSwLmUpgradeAdminStatus
INTEGER,
xfSwLmUpgradeOperStatus
INTEGER,
xfSwLmUpgradeProgress
Integer32,
xfSwLmUpgradeFailure
INTEGER,
xfSwLmUpgradeDescription
SnmpAdminString
}
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.1
xfSwLmUpgradeIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Objects used to index the table."
::= { xfSwLmUpgradeEntry 1 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.3
xfSwLmUpgradeProductNumber OBJECT-TYPE
SYNTAX XfProductnumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Product number of the load module. Normally something
like 'CAXR102_012/1'."
::= { xfSwLmUpgradeEntry 3 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.4
xfSwLmUpgradeRevision OBJECT-TYPE
SYNTAX XfProductRevision
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Revision to which the load module should be upgraded.
Normally something like 'R1A'."
::= { xfSwLmUpgradeEntry 4 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.6
xfSwLmUpgradeAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
upgradeStarted(1),
upgradeAborted(2),
activeAndRunning(3),
upgradeTest(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the desired status for this release. To start
a software upgrade the manager has to set
xfSwLmUpgradeRevision. After that it will set this
object to upgradeStarted. Which will lead to downloading
the SBDF-file from the FTP Server. For the active release
write is possible but will have no impact."
::= { xfSwLmUpgradeEntry 6 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.7
xfSwLmUpgradeOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
upgradeStarted(2),
upgradeFinished(3),
upgradeTested(4),
upgradeFailed(5),
upgradeAborted(6),
errorInternalError(50),
errorFileStorage(51),
ftpPingFailed(52),
ftpNoAccess(53),
ftpConnectionDetailsMissing(54),
ftpConnectionDetailsInvalid(55),
ftpConnectionTimeout(56),
ftpNoSuchRemoteFile(57),
ftpNoSuchRemoteDir(58),
ftpServiceNotAvailable(421),
ftpUnableToOpenDataConnection(425),
ftpConnectionClosed(426),
ftpFileBusy(450),
ftpLocalError(451),
ftpInsufficienStorageSpace(452),
ftpSyntaxError(501),
ftpCommandNotImplemented(502),
ftpBadSequenceCommands(503),
ftpParameterNotImplemented(504),
ftpNotLoggedIn(530),
ftpNeedAccount(532),
ftpFileUnavailable(550),
ftpExceededStorageAllocation(552),
ftpFileNameNotAllowed(553)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the software upgrade process
for this load module.
active(1)
the load module is active and running on the PIU.
upgradeStarted(2)
a load module will have this status directly
after the SRDF info for this module is loaded
and the xfSwLmUpgradeAdminStatus of the
release was set to upgradeStarted.
upgradeFinished(3)
indicates that this load modules has been retreived
and burned into the flash memories.This is the
state of load modules that are part of an active
release.
upgradeTested(4)
This release is running as test and not committed
yet.
upgradeFailed(5)
upgraded has failed for a reason, e.g. file transfer
checksum was wrong, see xfSwLmUpgradeFailure.
upgradeAborted(6)
when the manager has aborted the upgrade of the
complete release whilst this load module wasn't
upgradedFinished yet this will be its status.
The 50 series errors are reported by the FTP client on
the node.
errorInternalError(50)
An internal error detected before FTP operation.
errorFileStorage(51)
Error when erasing flash to store the downloaded
file at the node.
ftpPingFailed(52)
FTP ping failed.
ftpNoAccess(53)
Not able to send the FTP commands.
ftpConnectionDetailsMissing(54)
FTP connection details are missing.
ftpConnectionDetailsInvalid(55)
FTP connection details are invalid.
ftpConnectionTimeout(56)
FTP connection timeout is detected.
ftpNoSuchRemoteFile(57)
No such remote file exists.
ftpNoSuchRemoteDir(58)
No such remote directory exists.
The 400 series errors occur when the command was not accepted
and the requested action did not take place, but the error
condition is temporary and the action may be requested again.
ftpServiceNotAvailable(421)
Service not available, closing control connection. This
may be a reply to any command if the service knows it
must shut down. Possible causes are transfer timeouts
and/or FTP server resets.
ftpUnableToOpenDataConnection(425)
Can't open data connection. Try changing from PASV to
PORT mode.
ftpConnectionClosed(426)
Connection closed and file transfer is aborted. Possible
causes are out of local diskspace and loss of connection.
ftpFileBusy(450)
Requested file action not taken. File
unavailable (e.g file busy).
ftpLocalError(451)
Requested action aborted due to local error in processing.
ftpInsufficienStorageSpace(452)
Requested action not taken due to insufficient
storage space on the server.
The 500 series errors occur when the command was not accepted
and the requested action did not take place.
ftpSyntaxError(501)
FTP Syntax error in parameters or arguments.
ftpCommandNotImplemented(502)
FTP Command not implemented.
ftpBadSequenceCommands(503)
Bad sequence of the FTP commands.
ftpParameterNotImplemented(504)
FTP command not implemented for that parameter.
ftpNotLoggedIn(530)
Not logged in. Your username and/or password is being
rejected, contact the server adminstrator.
ftpNeedAccount(532)
Need account for storing files.
ftpFileUnavailable(550)
Requested action not taken. File unavailable
(e.g.file not found, no access). Contact the server
adminstrator.
ftpExceededStorageAllocation(552)
Requested file action aborted.Exceeded storage allocation (for
current directory or data set). Contact the server adminstrator.
ftpFileNameNotAllowed(553)
Requested action not taken. File name not allowed. Try changing
the file name or getting rid of spaces in the file name.
"
::= { xfSwLmUpgradeEntry 7 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.8
xfSwLmUpgradeProgress OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the progress in downloading
the respective load module when part of an upgrade of
an inserted PIU."
::= { xfSwLmUpgradeEntry 8 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.9
xfSwLmUpgradeFailure OBJECT-TYPE
SYNTAX INTEGER
{
downloadFailure(1),
programFailure(2),
noFailure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the cause of a software
upgrade failure. "
::= { xfSwLmUpgradeEntry 9 }
-- 1.3.6.1.4.1.193.81.2.7.1.10.1.10
xfSwLmUpgradeDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates a textual
description of the load module, indicating PIU type
as stated by the entPhysicalDescription MO."
::= { xfSwLmUpgradeEntry 10 }
-- 1.3.6.1.4.1.193.81.2.7.1.11
xfSwGlobalState OBJECT-TYPE
SYNTAX BITS
{
noUpgrade(0),
sblStarted(1),
sblWaitForActivate(2),
sblWaitForCommit(3),
manualStarted(4),
manualWaitForActivate(5),
manualWaitForCommit(6),
unitUpgrade(7),
cachingLoadModules(8),
preparingForTest(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objecty indicates the global state of the
Software Upgrade process.
noUpgrade(0), no Software upgrade ongoing
sblStarted(1), a SBL upgrade is started and SBDF and Load Modules are downloading
sblWaitForActivate(2), a SBL upgrade is finished and waiting for an activation
sblWaitForCommit(3), a SBL upgrade is in test phase and waiting for commit
manualStarted(4), a manual upgrade is started and Load Modules are downloading
manualWaitForActivate(5), a manual upgrade is finished and waiting for an activation
manualWaitForCommit(6), a manual upgrade is in test phase and waiting for commit
unitUpgrade(7), an unit is inserted and in the process of upgrading
cachingLoadModules(8), software upgrade is in the process of downloading the load
modules for cache.
preparingForTest(9), a period after a power-up/restart the node prepares to enter
the test phase. During this period some units might restart
and it is not possible to commit the software upgrade."
::= { xfSwObjects 11 }
-- 1.3.6.1.4.1.193.81.2.7.2
xfSwConformance OBJECT IDENTIFIER ::= { xfSoftwareMIB 2 }
-- 1.3.6.1.4.1.193.81.2.7.2.1
xfSwCompliances OBJECT IDENTIFIER ::= { xfSwConformance 1 }
-- this module
-- this module
-- 1.3.6.1.4.1.193.81.2.7.2.1.1
xfSwFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which
implement everything."
MODULE -- this module
MANDATORY-GROUPS { xfSwGroup, xSwGroupR2 }
::= { xfSwCompliances 1 }
-- 1.3.6.1.4.1.193.81.2.7.2.2
xfSwGroups OBJECT IDENTIFIER ::= { xfSwConformance 2 }
-- 1.3.6.1.4.1.193.81.2.7.2.2.1
xfSwGroup OBJECT-GROUP
OBJECTS { xfSwRelease, xfSwLoadModuleIndex, xfSwLoadModuleProductNumber, xfSwLoadModuleRevision, xfSwLoadModuleOperStatus,
xfSwReleaseIndex, xfSwReleaseProductNumber, xfSwReleaseRevision, xfSwReleaseAdminStatus, xfSwReleaseOperStatus,
xfSwActiveRelease, xfSwBootTime, xfSwCommitType, xfSwBoardProductNumber, xfSwBoardRevision,
xfSwNpuPassiveProductNumber, xfSwNpuPassiveSwitch, xfSwLoadModuleFailure, xfSwNpuPassiveRevision, xfSwBoardStatus
}
STATUS current
DESCRIPTION
"Group of all software related objects."
::= { xfSwGroups 1 }
-- 1.3.6.1.4.1.193.81.2.7.2.2.2
xSwGroupR2 OBJECT-GROUP
OBJECTS { xfSwBoardSuProgress, xfSwLmUpgradeIndex, xfSwLmUpgradeProductNumber, xfSwLmUpgradeRevision, xfSwLmUpgradeAdminStatus,
xfSwLmUpgradeOperStatus, xfSwBoardMinProductNumber, xfSwBoardMinRevision, xfSwVersionControl, xfSwLoadModuleProgress,
xfSwLmUpgradeFailure, xfSwBoardTrafficDisturbance, xfSwReleaseSBLType, xfSwLmUpgradeProgress, xfSwAutoUpgrade,
xfSwAutoDowngrade, xfSwGlobalState, xfSwAcceptFailure, xfSwLoadModuleDescription, xfSwLmUpgradeDescription
}
STATUS current
DESCRIPTION
"All objects added for MINI-LINK Traffic Node R2."
::= { xfSwGroups 2 }
-- 1.3.6.1.4.1.193.81.2.7.2.2.3
xfSwObsoleteGroup OBJECT-GROUP
OBJECTS { xfSwBoardLoadModuleIndex, xfSwBoardLoadModuleType }
STATUS obsolete
DESCRIPTION
"Description."
::= { xfSwGroups 3 }
END
--
-- 10_19603-crxr10201_1_software.mi2
--