mibs/ewc/HIPATH-WIRELESS-DOT11-EXTNS-MIB
HIPATH-WIRELESS-DOT11-EXTNS-MIB DEFINITIONS ::= BEGIN
IMPORTS
hiPathWirelessMgmt, hiPathWirelessModules
FROM HIPATH-WIRELESS-SMI
dot11WEPDefaultKeyIndex
FROM IEEE802dot11-MIB
ifIndex
FROM IF-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
Integer32, Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
MacAddress, TruthValue, RowStatus, DisplayString
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.4329.15.5.3
hiPathWirelessDot11ExtnsMIB MODULE-IDENTITY
LAST-UPDATED "201602231446Z" -- Tuesday Feb 23 14:46 UTC 2016
ORGANIZATION
"Chantry Networks, Inc"
CONTACT-INFO
"Chantry Networks, Inc.
55 Commerce Valley Drive (W), Suite 400
Thornhill, Ontario L3T 7V9, Canada
Phone: 1-289-695-3182
Fax: 1 289-695-3299"
DESCRIPTION
"This module provides extension objects to the ieee80211 MIB."
REVISION "201602231446Z" -- Tuesday Feb 23 14:46 UTC 2016
DESCRIPTION
"
- deprecated dot11ExtSmtMaxBasicRate, dot11ExtSmtMaxOperationalRate, dot11ExtSmtBGretries, dot11ExtSmtBEretries,
dot11ExtSmtVIretries, dot11ExtSmtVOretries and dot11ExtSmtTVOretries from dot11ExtSmtTable.
- deprecated dot11ExtWEPKeyMappingsTable.
"
REVISION "201503121515Z" -- Mar 12, 2015 at 15:15 GMT
DESCRIPTION
"- Added dot11ExtSmtProbeSuppression, dot11ExtSmtForceDisassociate, and
dot11ExtSmtRssThreshold to dot11ExtSmtTable.
"
REVISION "201310161515Z" -- Oct 16, 2013 at 15:15 GMT
DESCRIPTION
"- Added dot11ExtSmtRadioAttenuation to dot11ExtSmtTable.
- Added width80Mhz(4) to dot11nChlWidth.
- Added dot11c(5) to dot11Capabilities.
- Added dot11ac(11) and dot11cStrict(12) to dot11ExtRadioType.
- Added notSupport(0) to dot11DiversityRxDiversity and dot11DiversityTxDiversity.
- Added mode11AC(6) to assocIfIndex.
"
REVISION "201304301515Z" -- April 30, 2013 at 15:15 GMT
DESCRIPTION
"- Added assocDLLostRetriesPackets and assocDLLostRetriesBytes to assocGroupTable.
"
REVISION "201108171815Z" -- August 17, 2011 at 18:15 GMT
DESCRIPTION
"dot11ExtRadioStatsTable was modified:
- Added new elements to enhanace radio stats -- dot11ExtRadioAvgBusyChPercentage, dot11ExtRadioMaxBusyChPercentage,
dot11ExtRadioAvgRxChOccPercentage, dot11ExtRadioMaxRxChOccPercentage
- Description of some the elements in that table are enhanced.
- Defined range for some the elements in that table.
New object group, dot11ExtRadioStatsGroup, was created."
REVISION "201107201145Z" -- July 20, 2011 at 11:45 GMT
DESCRIPTION
"assocIfIndex definition was enhanced to include 11n operational mode."
REVISION "201105050958Z" -- May 05, 2011 at 09:58 GMT
DESCRIPTION
"- Table dot11nConfigTable was modified. More radio attributes were added to that table.
- assocGroupRSS was added to assocGroupTable.
- New object groups were created for modified tables: dot11nConfigGroup, assocGroupGroup, assocCountersGroup.
- Corrected description for assocReceivedRSSI."
REVISION "201101131125Z" -- January 13, 2011 at 11:25 GMT
DESCRIPTION
"- dot11ExtRadioType: Radio attribute was modified with more granularity.
- Contact information was modified.
- Corrected error in revision history descriptions."
REVISION "201004081716Z" -- April 08, 2010 at 17:16 GMT
DESCRIPTION
"Obsoleted:
- dot11ExtVlanSmtTable elements: vlanBridgeMode and vlanTag"
REVISION "200901191415Z" -- January 19, 2009 at 14:15 GMT
DESCRIPTION
"Updated contact information.
Corrected syntax error in dot11ExtSmtDcsMode."
REVISION "200805091651Z" -- May 09, 2008 at 16:51 GMT
DESCRIPTION
"Added antenna selection.
Added more radio attributes to dot11ExtSmtTable.
Added radio stats (dot11ExtRadioStatsTable).
"
REVISION "200709281430Z" -- September 28, 2007 at 14:30 GMT
DESCRIPTION
"- Additional radio attributes were added to dot11ExtSmtTable.
- dot11gBasicG was obsoleted.
- dot11bBasicB was obsoleted."
REVISION "200610241305Z" -- October 24, 2006 at 13:05 GMT
DESCRIPTION
"Added antenna diversity for radios.
accocIfIndex syntax and description were modified."
REVISION "200510280114Z" -- October 28, 2005 at 01:14 GMT
DESCRIPTION
"Initial revision."
::= { hiPathWirelessModules 3 }
--
-- Type definitions
--
WEPKeytype ::= OCTET STRING (SIZE (0 | 14 | 38))
--
-- Node definitions
--
-- 1.3.6.1.4.1.4329.15.3.1
dot11ExtnsMib OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1
dot11Extsmt OBJECT IDENTIFIER ::= { dot11ExtnsMib 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1
dot11ExtBSSIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11ExtBSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The dot11ExtBSSIDTable contains a list of the BSS (Basic Service Set)
Identifiers supported by each radio, and associates an
SSID with with each BSS."
::= { dot11Extsmt 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1
dot11ExtBSSIDEntry OBJECT-TYPE
SYNTAX Dot11ExtBSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the BSSID table."
INDEX { ifIndex, dot11ExtBSSIndex }
::= { dot11ExtBSSIDTable 1 }
Dot11ExtBSSIDEntry ::=
SEQUENCE {
dot11ExtBSSIndex
Integer32,
dot11ExtBSSID
MacAddress,
dot11ExtSSIDID
Integer32,
dot11ExtSSID
OCTET STRING,
dot11ExtBSSIDWEPKeyIndex
Integer32,
dot11ExtSSIDSuppress
TruthValue,
dot11ExtPriorityTrafficHandling
TruthValue
}
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1.1
dot11ExtBSSIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, that identifies
each Basic Service Set Identifier (BSSID) supported by a radio."
::= { dot11ExtBSSIDEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1.2
dot11ExtBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Basic Service Set Identifier (BSSID) uniquely identifies a
wireless network adapter. In the case of the AP2620,
a radio can support up to 8 distinct BSSIDs."
::= { dot11ExtBSSIDEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1.3
dot11ExtSSIDID OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSIDID is a High Path Wireless internal numeric identifier for the SSID.
This number is meaningless external to the product."
::= { dot11ExtBSSIDEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1.4
dot11ExtSSID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service Set Identifier (SSID) is the network name identifying
the wireless network to which this adapter belongs."
::= { dot11ExtBSSIDEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1.5
dot11ExtBSSIDWEPKeyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the WEP default key associated with this BSS
from the ieee802dot11 dot11WEPDefaultKeysTable."
::= { dot11ExtBSSIDEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1.6
dot11ExtSSIDSuppress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When True, the radio will not broadcast the SSID associated
with this BSSID in the beacons."
::= { dot11ExtBSSIDEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.1.1.1.1.7
dot11ExtPriorityTrafficHandling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When True, priority traffic handling is enabled for this BSSID."
::= { dot11ExtBSSIDEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.1.1.2
dot11ExtWEPKeyMappingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11ExtWEPKeyMappingsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The dot11ExtWEPKeyMappingsTable supports the ability to
configure a separate WEP key for each BSS/Station pairing.
The WEPKeyMappingValues in this table are logically WRITE-ONLY.
Any attempt to read these values will return null or 0."
::= { dot11Extsmt 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.2.1
dot11ExtWEPKeyMappingsEntry OBJECT-TYPE
SYNTAX Dot11ExtWEPKeyMappingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot11ExtWEPKeyMappingsTable."
INDEX { ifIndex, dot11ExtBSSIndex, dot11ExtWEPKeyMappingIndex }
::= { dot11ExtWEPKeyMappingsTable 1 }
Dot11ExtWEPKeyMappingsEntry ::=
SEQUENCE {
dot11ExtWEPKeyMappingIndex
Integer32,
dot11ExtWEPKeyMappingAddress
MacAddress,
dot11ExtWEPKeyMappingWEPOn
TruthValue,
dot11ExtWEPKeyMappingValue
WEPKeytype,
dot11ExtWEPKeyMappingStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.1.1.2.1.1
dot11ExtWEPKeyMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auxiliary variable used to identify instances
of the columnar objects in the WEP Key Mappings Table."
::= { dot11ExtWEPKeyMappingsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.2.1.2
dot11ExtWEPKeyMappingAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address of the STA for which the values from this
key mapping entry are to be used."
::= { dot11ExtWEPKeyMappingsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.2.1.3
dot11ExtWEPKeyMappingWEPOn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Boolean as to whether WEP is to be used when communicating
with the dot11WEPKeyMappingAddress STA."
::= { dot11ExtWEPKeyMappingsEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.1.2.1.4
dot11ExtWEPKeyMappingValue OBJECT-TYPE
SYNTAX WEPKeytype
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A WEP secret key value."
::= { dot11ExtWEPKeyMappingsEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.1.2.1.5
dot11ExtWEPKeyMappingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating, modifying, and
deleting instances of the columnar objects in the WEP key
mapping Table."
::= { dot11ExtWEPKeyMappingsEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.1.3
dot11CapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11CapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The dot11CapabilitiesTable contains the 802.11 protocols
that each radio in the accessPoint are capable of supporting."
::= { dot11Extsmt 3 }
-- 1.3.6.1.4.1.4329.15.3.1.1.3.1
dot11CapabilitiesEntry OBJECT-TYPE
SYNTAX Dot11CapabilitiesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot11CapabilitiesTable."
INDEX { ifIndex }
::= { dot11CapabilitiesTable 1 }
Dot11CapabilitiesEntry ::=
SEQUENCE {
dot11Capabilities
BITS
}
-- 1.3.6.1.4.1.4329.15.3.1.1.3.1.1
dot11Capabilities OBJECT-TYPE
SYNTAX BITS
{
dot11b(0),
dot11g(1),
dot11a(2),
dot11j(3),
dot11n(4),
dot11c(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the capabilities of a radio, for example the protocol supported."
::= { dot11CapabilitiesEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.4
dot11bConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11bConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains configuration elements specific to the 802.11b protocol."
::= { dot11Extsmt 4 }
-- 1.3.6.1.4.1.4329.15.3.1.1.4.1
dot11bConfigEntry OBJECT-TYPE
SYNTAX Dot11bConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The dot11bConfigTable contains configuration elements
specific to the 802.11b protocol. If an attempt to
read the elements is made for a radio which does not
support 802.11b, null or 0 will be returned."
INDEX { ifIndex }
::= { dot11bConfigTable 1 }
Dot11bConfigEntry ::=
SEQUENCE {
dot11bEnabled
TruthValue,
dot11BasicB
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.1.1.4.1.1
dot11bEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, 802.1b protocol support is active on this radio."
::= { dot11bConfigEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.4.1.2
dot11BasicB OBJECT-TYPE
SYNTAX INTEGER
{
basic11b(1),
basic11(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Specifies the basic rate set for a 11b or 11b+g radio. When set to
basic11b, the radio uses all four 11b rates (1, 2, 5.5 and 11 Mbps)
as basic rates. When when set to basic11 the radio uses
only the two 11 rates (1 and 2 Mbps) as basic rates."
::= { dot11bConfigEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.5
dot11gConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11gConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The dot11gConfigTable contains configuration elements
specific to the 802.11g protocol. If an attempt to
read the elements is made for a radio which does not
support 802.11g, null or 0 will be returned."
::= { dot11Extsmt 5 }
-- 1.3.6.1.4.1.4329.15.3.1.1.5.1
dot11gConfigEntry OBJECT-TYPE
SYNTAX Dot11gConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot11gConfigTable."
INDEX { ifIndex }
::= { dot11gConfigTable 1 }
Dot11gConfigEntry ::=
SEQUENCE {
dot11gEnabled
TruthValue,
dot11gProtectionMode
INTEGER,
dot11gProtectionType
INTEGER,
dot11gProtectionRate
INTEGER,
dot11gBasicG
INTEGER,
dot11gProtectionModeSelected
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.1.1.5.1.1
dot11gEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, 802.1g protocol support is active on this radio."
::= { dot11gConfigEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.5.1.3
dot11gProtectionMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
auto(2),
always(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures whether and when to use Protection Mode for the 802.11g
transmissions. Protection Mode helps reduce collisions with legacy
802.11b stations at the expense of additional overhead. None specifies
that no protection is to be used. Auto specifies that
radio will enable protection mode when it detects
an 802.11b station. Always specifies that protection
mode is always enabled."
::= { dot11gConfigEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.1.5.1.4
dot11gProtectionType OBJECT-TYPE
SYNTAX INTEGER
{
ctsOnly(1),
rtcCts(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether 802.11g Protection Mode uses a RTS-CTS sequence
or a CTS-only protection mechanism when Protection Mode is enabled."
::= { dot11gConfigEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.1.5.1.5
dot11gProtectionRate OBJECT-TYPE
SYNTAX INTEGER
{
rate1Mbps(0),
rate2Mbps(1),
rate5Mbps(2),
rate11Mbps(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the rate to be used by RTS or CTS in protection mode."
::= { dot11gConfigEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.1.5.1.6
dot11gBasicG OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
basic11(2),
basic11b(3),
ofdm(4)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Specifies the set of basic rates in 11-g-only mode. Default
allows all possible basic rates (1, 2, 5.5, 11, 6, 12 and 24 Mbps).
Basic11 specifies only 11 rates (1 nad 2 Mbps) as basic. Basic11b
specifies all four 11b rates (1, 2, 5.5 and 11 Mbps) as basic.
OFDM specifies only OFDM rates (6, 12 and 24 Mbps) as basic."
::= { dot11gConfigEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.1.1.5.1.7
dot11gProtectionModeSelected OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
on(1),
notAvailable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protection mode selected by Access Point. Values are:
off(0) = protection mode is set to off by Access Point.
on(1) = protection mode is set to on by Access Point.
notAvailable(2) = protection mode status is not available, either
due to Access Point's version or stats have not yet been collected
by Controller."
::= { dot11gConfigEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7
dot11ExtSmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11ExtSmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Extended settings table."
::= { dot11Extsmt 7 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1
dot11ExtSmtEntry OBJECT-TYPE
SYNTAX Dot11ExtSmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Extended settings table dot11ExtSmtTable."
INDEX { ifIndex }
::= { dot11ExtSmtTable 1 }
Dot11ExtSmtEntry ::=
SEQUENCE {
smtShortPreambleInvoked
INTEGER,
dot11ExtSmtCurrentChannel
Integer32,
dot11ExtSmtMaxBasicRate
OCTET STRING,
dot11ExtSmtMinBasicRate
OCTET STRING,
dot11ExtSmtMaxOperationalRate
OCTET STRING,
dot11ExtSmtCurChanSelectedByAP
Integer32,
dot11ExtSmtRFDomain
DisplayString,
dot11ExtSmtAutoTxPowerCtrl
Integer32,
dot11ExtSmtCurrentTxPowerLevel
Integer32,
dot11ExtSmtMaxTxPower
Integer32,
dot11ExtSmtMinTxPower
Integer32,
dot11ExtSmtAutoTxPowerCtrlAdjust
Integer32,
dot11ExtSmtBGretries
Integer32,
dot11ExtSmtBEretries
Integer32,
dot11ExtSmtVIretries
Integer32,
dot11ExtSmtVOretries
Integer32,
dot11ExtSmtTVOretries
Integer32,
dot11ExtSmtDcsMode
INTEGER,
dot11ExtSmtDcsNoiseThreshold
Integer32,
dot11ExtSmtDcsChlOccThreshold
Integer32,
dot11ExtSmtDcsUpdatePeriod
Integer32,
dot11ExtSmtDcsChannelSelection
Integer32,
dot11ExtSmtDcsChannelList
DisplayString,
dot11ExtSmtRadioAttenuation
Integer32,
dot11ExtSmtProbeSuppression
INTEGER,
dot11ExtSmtForceDisassociate
INTEGER,
dot11ExtSmtRssThreshold
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.1
smtShortPreambleInvoked OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(0),
shortPreamble(1),
longPreamble(2),
autoSelectPreamble(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of preamble used in an 11b/g radio:
always short, always long or automatically selected."
::= { dot11ExtSmtEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.2
dot11ExtSmtCurrentChannel OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specfies the current radio channel. Value of zero means 'auto' selection."
::= { dot11ExtSmtEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.3
dot11ExtSmtMaxBasicRate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..126))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the maximum basic rate."
::= { dot11ExtSmtEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.4
dot11ExtSmtMinBasicRate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..126))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum basic rate which is
also the minimum operational rate."
::= { dot11ExtSmtEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.5
dot11ExtSmtMaxOperationalRate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..126))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the maximum operational rate."
::= { dot11ExtSmtEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.6
dot11ExtSmtCurChanSelectedByAP OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current channel selected by Access Point."
::= { dot11ExtSmtEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.7
dot11ExtSmtRFDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies a radio as belonging to an RF Domain. This is
used to provide dynamic radio management when all SSIDs
are suppressed."
::= { dot11ExtSmtEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.8
dot11ExtSmtAutoTxPowerCtrl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto Transmission Power Control."
::= { dot11ExtSmtEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.9
dot11ExtSmtCurrentTxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current transmission power level of the radio."
::= { dot11ExtSmtEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.10
dot11ExtSmtMaxTxPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum transmission power level of the radio."
::= { dot11ExtSmtEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.11
dot11ExtSmtMinTxPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum transmission power level of the radio."
::= { dot11ExtSmtEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.12
dot11ExtSmtAutoTxPowerCtrlAdjust OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto Transmission Power Control adjust."
::= { dot11ExtSmtEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.13
dot11ExtSmtBGretries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Number of retries for Background traffics. "
::= { dot11ExtSmtEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.14
dot11ExtSmtBEretries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Number of retries for Best Efforts traffics."
::= { dot11ExtSmtEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.15
dot11ExtSmtVIretries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Number of retries for Video traffics."
::= { dot11ExtSmtEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.16
dot11ExtSmtVOretries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Number of retries for Voice traffics."
::= { dot11ExtSmtEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.17
dot11ExtSmtTVOretries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Number of retries for Turbo Voice traffics."
::= { dot11ExtSmtEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.18
dot11ExtSmtDcsMode OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
monitor(1),
active(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DCS operation mode."
::= { dot11ExtSmtEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.19
dot11ExtSmtDcsNoiseThreshold OBJECT-TYPE
SYNTAX Integer32 (-95..-50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DCS Nose Threshould. It determines at which interface level
the AP will decide to look for a ne operating channel. The
unit is dBm. It is valid only when DCS operation mode is set
to monitor or active"
::= { dot11ExtSmtEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.20
dot11ExtSmtDcsChlOccThreshold OBJECT-TYPE
SYNTAX Integer32 (10..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DCS Channel Occupancy Threshold. It determines at which channel
utilization the AP decides to look for a new operating channel.
The unit is % percentage. It is valid only when DCS operation
mode is set to monitor or active"
::= { dot11ExtSmtEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.21
dot11ExtSmtDcsUpdatePeriod OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DCS Update Period. It determines the period during which the AP
averages the DCS Noise Threshold & DCS channel Occupancy Threshold
measurements. The unit is minutes. The range is 1-15. The 0 means
DCS is disabled. It is valid only when DCS operation mode is set
to monitor or active"
::= { dot11ExtSmtEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.22
dot11ExtSmtDcsChannelSelection OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DCS Channel Plan Selection.It is Bitmask of:
1 = all chls (only A),
2 = 3 chls (only BG),
4 = 4 chls (only BG),
8 = auto (only BG),
16 = custom"
::= { dot11ExtSmtEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.23
dot11ExtSmtDcsChannelList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DCS Channel Plan List.It is custom channel plan. It is valid only when
DCS Channel Plan Selection is set to custom"
::= { dot11ExtSmtEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.24
dot11ExtSmtRadioAttenuation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Attenuation of cable between external antenna and AP in db.
value -1 : not configured.
"
::= { dot11ExtSmtEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.25
dot11ExtSmtProbeSuppression OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables/Disables probe suppression. Default is disabled.
"
::= { dot11ExtSmtEntry 25 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.26
dot11ExtSmtForceDisassociate OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IF force-disassoc is enabled, Clients that are associated are sent a Disassoc if the averaged
RSS is < RSS-threshold -5dBm (with some hysteresis). Default is disabled."
::= { dot11ExtSmtEntry 26 }
-- 1.3.6.1.4.1.4329.15.3.1.1.7.1.27
dot11ExtSmtRssThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The radio probe suppression RSS threshold. The range is from -50dBm to -100dBm. Default value is -90dBm."
::= { dot11ExtSmtEntry 27 }
-- 1.3.6.1.4.1.4329.15.3.1.1.8
dot11ExtVlanSmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11ExtVlanSmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration about bridging mode for the radio."
::= { dot11Extsmt 8 }
-- 1.3.6.1.4.1.4329.15.3.1.1.8.1
dot11ExtVlanSmtEntry OBJECT-TYPE
SYNTAX Dot11ExtVlanSmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in dot11ExtVlanSmtTable table."
INDEX { ifIndex, dot11ExtBSSIndex }
::= { dot11ExtVlanSmtTable 1 }
Dot11ExtVlanSmtEntry ::=
SEQUENCE {
vlanBridgeMode
TruthValue,
vlanTag
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.1.1.8.1.1
vlanBridgeMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"When true, bridging mode is enabled on this radio."
::= { dot11ExtVlanSmtEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.8.1.2
vlanTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Integer specifying the VLAN tag. If untagged, returns -1."
::= { dot11ExtVlanSmtEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.10
dot11DiversityTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11DiversityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of configuration elements specific to diversity support."
::= { dot11Extsmt 10 }
-- 1.3.6.1.4.1.4329.15.3.1.1.10.1
dot11DiversityEntry OBJECT-TYPE
SYNTAX Dot11DiversityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot11DiversityTable."
INDEX { ifIndex }
::= { dot11DiversityTable 1 }
Dot11DiversityEntry ::=
SEQUENCE {
dot11DiversityRxDiversity
INTEGER,
dot11DiversityTxDiversity
INTEGER,
dot11AntennaSelection
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.1.1.10.1.1
dot11DiversityRxDiversity OBJECT-TYPE
SYNTAX INTEGER
{
notSupport(0),
best(1),
left(2),
right(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Diversity support for reception."
DEFVAL { best }
::= { dot11DiversityEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.10.1.2
dot11DiversityTxDiversity OBJECT-TYPE
SYNTAX INTEGER
{
notSupport(0),
best(1),
left(2),
right(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Diversity support for transmission."
DEFVAL { best }
::= { dot11DiversityEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.10.1.3
dot11AntennaSelection OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
left(1),
middle(2),
leftMiddle(3),
right(4),
leftRight(5),
middleRight(6),
leftMiddleRight(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Antenna Selection for transmission and reception."
DEFVAL { none }
::= { dot11DiversityEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11
dot11nConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11nConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The dot11nConfigTable contains configuration elements
specific to the 802.11n protocol. If an attempt to
read the elements is made for a radio which does not
support 802.11n, null or 0 will be returned."
::= { dot11Extsmt 11 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1
dot11nConfigEntry OBJECT-TYPE
SYNTAX Dot11nConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot11nConfigTable."
INDEX { ifIndex }
::= { dot11nConfigTable 1 }
Dot11nConfigEntry ::=
SEQUENCE {
dot11nEnabled
TruthValue,
dot11nChlBonding
INTEGER,
dot11nChlWidth
INTEGER,
dot11nChlGuardInterval
INTEGER,
dot11nProtectEnabled
TruthValue,
dot11nProtectType
INTEGER,
dot11nProtectOffset
INTEGER,
dot11nPtotectBusyThr
INTEGER,
dot11nAggrMsduEnabled
TruthValue,
dot11nAggrMsduMaxLen
INTEGER,
dot11nAggrMpduEnabled
TruthValue,
dot11nAggrMpduMaxLen
INTEGER,
dot11nAggrMsduSubFrames
INTEGER,
dot11nAddbaSupEnabled
TruthValue,
dot11nConfigLDPC
TruthValue,
dot11nConfigSTBC
TruthValue,
dot11nConfigTXBF
TruthValue
}
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.1
dot11nEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, 802.1n protocol support is active on this radio."
::= { dot11nConfigEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.2
dot11nChlBonding OBJECT-TYPE
SYNTAX INTEGER
{
nobond(0),
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Channel Bonding."
::= { dot11nConfigEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.3
dot11nChlWidth OBJECT-TYPE
SYNTAX INTEGER
{
width20Mhz(1),
width40Mhz(2),
auto(3),
width80Mhz(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Channel Width."
::= { dot11nConfigEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.4
dot11nChlGuardInterval OBJECT-TYPE
SYNTAX INTEGER
{
short(1),
long(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Guard Interval."
::= { dot11nConfigEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.5
dot11nProtectEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Channel Protectino Mode."
::= { dot11nConfigEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.6
dot11nProtectType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
ctsOnly(1),
rtsCts(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol 40Mhz Channel Protection Type."
::= { dot11nConfigEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.7
dot11nProtectOffset OBJECT-TYPE
SYNTAX INTEGER
{
protectOffset20Mhz(1),
protectOffset25Mhz(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol 40Mhz Channel Protection Offset."
::= { dot11nConfigEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.8
dot11nPtotectBusyThr OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol 40Mhz Channel Protection Busy Threshold."
::= { dot11nConfigEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.9
dot11nAggrMsduEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Aggregate MSDUs."
::= { dot11nConfigEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.10
dot11nAggrMsduMaxLen OBJECT-TYPE
SYNTAX INTEGER (2290..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Aggregate MSDU Max Length."
::= { dot11nConfigEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.11
dot11nAggrMpduEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Aggregate MPDUs."
::= { dot11nConfigEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.12
dot11nAggrMpduMaxLen OBJECT-TYPE
SYNTAX INTEGER (1024..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Aggregate MPDU Max Length."
::= { dot11nConfigEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.13
dot11nAggrMsduSubFrames OBJECT-TYPE
SYNTAX INTEGER (2..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol Aggregate MPDU Max Number of Sub-frames."
::= { dot11nConfigEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.14
dot11nAddbaSupEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"802.11n protocol ADDBA Support."
::= { dot11nConfigEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.15
dot11nConfigLDPC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advanced error-detecting coding using Low Density Parity Check codes
to increase the reliability of the transmission."
::= { dot11nConfigEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.16
dot11nConfigSTBC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A simple transmit diversity scheme using Space Time Block Coding to
provide added robustness for devices where there are more transmit
chains than receiver chains."
::= { dot11nConfigEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.1.1.11.1.17
dot11nConfigTXBF OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An advanced transmit diversity scheme performing transmit beamforming to
generate signals that can be optimally received to enhance the reliability
and performance of wireless links."
::= { dot11nConfigEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.1.2
dot11ExtAPObjs OBJECT IDENTIFIER ::= { dot11ExtnsMib 2 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2
dot1XConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1XConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Conceptual table for 802.1X settings required for wireless
security."
::= { dot11ExtAPObjs 2 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1
dot1XConfigEntry OBJECT-TYPE
SYNTAX Dot1XConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in dot1XConfigTable table."
INDEX { ifIndex, dot11ExtBSSIndex }
::= { dot1XConfigTable 1 }
Dot1XConfigEntry ::=
SEQUENCE {
dot1XEnabled
TruthValue,
dot1XDynamicRekeyingInterval
Unsigned32,
dot1XWPA1Enabled
TruthValue,
dot1XWPAPassphrase
DisplayString,
dot1XWPACipherType
INTEGER,
dot1XWPA2Enabled
TruthValue,
dot1XWPA2CipherType
INTEGER,
dot1XConfigKeyManagement
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.1
dot1XEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable 802.1X authentication for this BSSID."
::= { dot1XConfigEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.2
dot1XDynamicRekeyingInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the time period, in seconds, after which
the key value must be updated."
::= { dot1XConfigEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.3
dot1XWPA1Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables WPA.1 (Wi-Fi Protected Access) on this BSSID"
::= { dot1XConfigEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.4
dot1XWPAPassphrase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the WPA passphrase for the BSSID. This element is logically
write only. Any attempt to read this element will result in null or 0."
::= { dot1XConfigEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.5
dot1XWPACipherType OBJECT-TYPE
SYNTAX INTEGER
{
tkipOnly(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the encryption algoritms allowed with WPA:
only TKIP if tkipOnly or both AES and TKIP if auto.
This value has meaning if WPA.1 is enabled."
::= { dot1XConfigEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.6
dot1XWPA2Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, WPA v.2 support is enabled."
::= { dot1XConfigEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.7
dot1XWPA2CipherType OBJECT-TYPE
SYNTAX INTEGER
{
auto(2),
aesOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the encryption algoritms allowed with WPA2:
only AES if aesOnly or both AES and TKIP if auto.
This value has meaning if WPA.2 is enabled."
::= { dot1XConfigEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.1.2.2.1.8
dot1XConfigKeyManagement OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
opportunisticKeying(1),
preAuthentication(2),
opportunisticKeyingAndPreauth(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key caching method in use.
This field has meaning when dot1XEnabled is true and WPAv2 is enabled."
::= { dot1XConfigEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.1.4
dot11ExtCounters OBJECT IDENTIFIER ::= { dot11ExtnsMib 4 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1
assocGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AssocGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"STA statistics table."
::= { dot11ExtCounters 1 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1
assocGroupEntry OBJECT-TYPE
SYNTAX AssocGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the STA statistics table."
INDEX { assocAddress }
::= { assocGroupTable 1 }
AssocGroupEntry ::=
SEQUENCE {
assocAddress
MacAddress,
assocIfIndex
INTEGER,
assocReceivedRSSI
Integer32,
assocTransmittedRSSI
Integer32,
assocReceivedRate
Unsigned32,
assocTransmittedRate
Unsigned32,
assocReceivedFrameCount
Counter64,
assocTransmittedFrameCount
Counter64,
assocReceiveErrors
Counter64,
assocTransmitErrors
Counter64,
assocTransmitBytes
Counter64,
assocReceiveBytes
Counter64,
assocReceivedRSS
Integer32,
assocDLLostRetriesPackets
Integer32,
assocDLLostRetriesBytes
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.1
assocAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address associated with the client."
::= { assocGroupEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.2
assocIfIndex OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
mode11A(1),
mode11G(2),
mode11B(3),
modeN50(4),
modeN24(5),
mode11AC(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of the radio mode with which the client is associated.
Values are: 11A =1, 11G =2 and 11B =3.
Symbols notation: modeN50 = an = n5.0Ghz, modeN24 = bgn = n2.4Ghz."
::= { assocGroupEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.3
assocReceivedRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI - Received Signal Strength Indicator.
RSS[dBm] = RSSI[dB]-Noise Floor[dBm] measured in dBm, i.e actual Rx power.
RSSI is a normalized indicator of RSS in which RSS is scaled to some vendor
specific range."
::= { assocGroupEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.4
assocTransmittedRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received signal strength averaged for the ACK packets received in response
to transmitted packets for this client."
::= { assocGroupEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.5
assocReceivedRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PHY rate for the packets received from this client."
::= { assocGroupEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.6
assocTransmittedRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PHY rate used to transmit packets for this client."
::= { assocGroupEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.7
assocReceivedFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames received from this client."
::= { assocGroupEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.8
assocTransmittedFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames transmitted for this client."
::= { assocGroupEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.9
assocReceiveErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames received with errors from this client."
::= { assocGroupEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.10
assocTransmitErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frames transmitted with errors (not acknowledged)
for this cleint."
::= { assocGroupEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.11
assocTransmitBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes transmitted for this client."
::= { assocGroupEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.12
assocReceiveBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes received from this client."
::= { assocGroupEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.13
assocReceivedRSS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSS - Received Signal Strength.
RSS[dBm] = RSSI[dB]-Noise Floor[dBm] measured in dBm, i.e actual Rx power.
RSS is the actual signal strength measured at the receiver. It is typically
measured in units of dBm."
::= { assocGroupEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.14
assocDLLostRetriesPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of downlink (the transmission path is from Access Point to client) lost packets due to excessive retries for this client.
"
::= { assocGroupEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.1.4.1.1.15
assocDLLostRetriesBytes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of downlink (the transmission path is from Access Point to client) lost bytes due to excessive retries for this client.
"
::= { assocGroupEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.1.4.2
assocCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF AssocCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"STA association statistics table."
::= { dot11ExtCounters 2 }
-- 1.3.6.1.4.1.4329.15.3.1.4.2.1
assocCountersEntry OBJECT-TYPE
SYNTAX AssocCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the STA association statistics table."
INDEX { assocAddress }
::= { assocCountersTable 1 }
AssocCountersEntry ::=
SEQUENCE {
assocAuthenticationCount
Counter64,
assocDeauthenticationCount
Counter64,
assocAssociationCount
Counter64,
assocDeassociationCount
Counter64,
assocReassociationCount
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.1.4.2.1.1
assocAuthenticationCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of authentications for this client."
::= { assocCountersEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.4.2.1.2
assocDeauthenticationCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of deauthentications for this client."
::= { assocCountersEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.4.2.1.3
assocAssociationCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of associations for this client."
::= { assocCountersEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.4.2.1.4
assocDeassociationCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of deassociations for this client."
::= { assocCountersEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.4.2.1.5
assocReassociationCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of reassociations for this client."
::= { assocCountersEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3
dot11ExtRadioStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot11ExtRadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of statistics for the dot11 radio."
::= { dot11ExtCounters 3 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1
dot11ExtRadioStatsEntry OBJECT-TYPE
SYNTAX Dot11ExtRadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dot11ExtRadioStatsEntry."
INDEX { ifIndex }
::= { dot11ExtRadioStatsTable 1 }
Dot11ExtRadioStatsEntry ::=
SEQUENCE {
dot11ExtRadioType
INTEGER,
dot11ExtRadioInUcastPkts
Counter64,
dot11ExtRadioInMcastPkts
Counter64,
dot11ExtRadioInBcastPkts
Counter64,
dot11ExtRadioInOctets
Counter64,
dot11ExtRadioInErrors
Counter64,
dot11ExtRadioInDiscardsPkts
Counter64,
dot11ExtRadioOutUcastPkts
Counter64,
dot11ExtRadioOutMcastPkts
Counter64,
dot11ExtRadioOutBcastPkts
Counter64,
dot11ExtRadioOutOctets
Counter64,
dot11ExtRadioOutErrors
Counter64,
dot11ExtRadioOutDiscardsPkts
Counter64,
dot11ExtRadioWepIcvErrorCount
Counter64,
dot11ExtRadioWepExcludedCount
Counter64,
dot11ExtRadioRetryCount
Counter64,
dot11ExtRadioMultipleRetryCount
Counter64,
dot11ExtRadioRtsSuccessCount
Counter64,
dot11ExtRadioRtsFailCount
Counter64,
dot11ExtRadioAckFailCount
Counter64,
dot11ExtRadioFrameDupCount
Counter64,
dot11ExtRadioTransFragCount
Counter64,
dot11ExtRadioMulTransFrameCount
Counter64,
dot11ExtRadioFailedCount
Counter64,
dot11ExtRadioReceivedFragCount
Counter64,
dot11ExtRadioMulRecFrameCount
Counter64,
dot11ExtRadioFcsErrorCount
Counter64,
dot11ExtRadioWepUndecrypCount
Counter64,
dot11ExtRadioTransFrameCount
Counter64,
dot11ExtRadioDeauthCacCount
Counter64,
dot11ExtRadioAvgNfCount
INTEGER,
dot11ExtRadioMaxNfCount
INTEGER,
dot11ExtRadioAvgChlOccCount
INTEGER,
dot11ExtRadioMaxChlOccCount
INTEGER,
dot11ExtRadioAvgTxOccCount
INTEGER,
dot11ExtRadioMaxTxOccCount
INTEGER,
dot11ExtRadioAvgRxOccCount
INTEGER,
dot11ExtRadioMaxRxOccCount
INTEGER,
dot11ExtRadioAvgBusyChPercentage
Unsigned32,
dot11ExtRadioMaxBusyChPercentage
Unsigned32,
dot11ExtRadioAvgRxChOccPercentage
Unsigned32,
dot11ExtRadioMaxRxChOccPercentage
Unsigned32
}
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.1
dot11ExtRadioType OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
dot11a(1),
dot11an(2),
dot11anStrict(3),
dot11b(4),
dot11g(5),
dot11bg(6),
dot11gn(7),
dot11bgn(8),
dot11gnStrict(9),
dot11j(10),
dot11ac(11),
dot11cStrict(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of radio (a/an or b/g/bgn)."
::= { dot11ExtRadioStatsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.2
dot11ExtRadioInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets from wireless-to-wired network at this radio."
::= { dot11ExtRadioStatsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.3
dot11ExtRadioInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast packets from wireless-to-wired network at this radio."
::= { dot11ExtRadioStatsEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.4
dot11ExtRadioInBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast packets from wireless-to-wired network at this radio."
::= { dot11ExtRadioStatsEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.5
dot11ExtRadioInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total bytes from wireless-to-wired network at this radio."
::= { dot11ExtRadioStatsEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.6
dot11ExtRadioInErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets from wireless-to-wired network at this radio."
::= { dot11ExtRadioStatsEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.7
dot11ExtRadioInDiscardsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discarded packets from wireless-to-wired network at this radio."
::= { dot11ExtRadioStatsEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.8
dot11ExtRadioOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets from wired-to-wireless network at this radio."
::= { dot11ExtRadioStatsEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.9
dot11ExtRadioOutMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast packets from wired-to-wireless network at this radio."
::= { dot11ExtRadioStatsEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.10
dot11ExtRadioOutBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast from wired-to-wireless network at this radio."
::= { dot11ExtRadioStatsEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.11
dot11ExtRadioOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total bytes from wired-to-wireless network at this radio."
::= { dot11ExtRadioStatsEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.12
dot11ExtRadioOutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets from wired-to-wireless network at this radio."
::= { dot11ExtRadioStatsEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.13
dot11ExtRadioOutDiscardsPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discarded packets from wired-to-wireless network at this radio."
::= { dot11ExtRadioStatsEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.14
dot11ExtRadioWepIcvErrorCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of WEP ICV Errors."
::= { dot11ExtRadioStatsEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.15
dot11ExtRadioWepExcludedCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of WEP excluded."
::= { dot11ExtRadioStatsEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.16
dot11ExtRadioRetryCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retry frames."
::= { dot11ExtRadioStatsEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.17
dot11ExtRadioMultipleRetryCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multiple retries frames."
::= { dot11ExtRadioStatsEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.18
dot11ExtRadioRtsSuccessCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of successful RTS frames."
::= { dot11ExtRadioStatsEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.19
dot11ExtRadioRtsFailCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of failed RTS frames."
::= { dot11ExtRadioStatsEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.20
dot11ExtRadioAckFailCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of failed ACK frames."
::= { dot11ExtRadioStatsEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.21
dot11ExtRadioFrameDupCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of duplicated frames."
::= { dot11ExtRadioStatsEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.22
dot11ExtRadioTransFragCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted fragment."
::= { dot11ExtRadioStatsEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.23
dot11ExtRadioMulTransFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted multicast fragment."
::= { dot11ExtRadioStatsEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.24
dot11ExtRadioFailedCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of failed frames."
::= { dot11ExtRadioStatsEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.25
dot11ExtRadioReceivedFragCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received fragment."
::= { dot11ExtRadioStatsEntry 25 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.26
dot11ExtRadioMulRecFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received multicast frame."
::= { dot11ExtRadioStatsEntry 26 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.27
dot11ExtRadioFcsErrorCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of FCS errors frames."
::= { dot11ExtRadioStatsEntry 27 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.28
dot11ExtRadioWepUndecrypCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of undecryptable WEP frames."
::= { dot11ExtRadioStatsEntry 28 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.29
dot11ExtRadioTransFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of transmitted frames."
::= { dot11ExtRadioStatsEntry 29 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.30
dot11ExtRadioDeauthCacCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of deauthentications due to CAC."
::= { dot11ExtRadioStatsEntry 30 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.31
dot11ExtRadioAvgNfCount OBJECT-TYPE
SYNTAX INTEGER (50..100)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Noise floor measured by the AP on the 802.11 channel. Noise floor is measured during
the quiet time, between the valid transmission or reception of 802.11 frames.
Variable is reported as average over the last 30 seconds."
::= { dot11ExtRadioStatsEntry 31 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.32
dot11ExtRadioMaxNfCount OBJECT-TYPE
SYNTAX INTEGER (50..100)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum noise floor measured by the AP on the 802.11 channel. Noise floor is measured
during the quiet time, between the valid transmission or reception of 802.11 frames.
Variable is reported as max over the last 30 seconds."
::= { dot11ExtRadioStatsEntry 32 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.33
dot11ExtRadioAvgChlOccCount OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average DCS Channel Utilization by Adjacent APs [%]."
::= { dot11ExtRadioStatsEntry 33 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.34
dot11ExtRadioMaxChlOccCount OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum DCS Channel Utilization by Adjacent APs [%]."
::= { dot11ExtRadioStatsEntry 34 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.35
dot11ExtRadioAvgTxOccCount OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOccupancy variable reports the time (in %) AP was transmitting during the last 100
seconds. During AP transmission all other STA/AP's has only receive access to the channel.
Variable is reported as average over the last 100 seconds."
::= { dot11ExtRadioStatsEntry 35 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.36
dot11ExtRadioMaxTxOccCount OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TxOccupancy variable reports the maximum time (in %) AP was transmitting during
the last 100 seconds. During AP transmission all other STA/AP's has only receive
access to the channel. Variable is reported as max over the last 100 seconds."
::= { dot11ExtRadioStatsEntry 36 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.37
dot11ExtRadioAvgRxOccCount OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average DCS RX Channel Utilization [%]."
::= { dot11ExtRadioStatsEntry 37 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.38
dot11ExtRadioMaxRxOccCount OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum DCS RX Channel Utilization [%]."
::= { dot11ExtRadioStatsEntry 38 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.39
dot11ExtRadioAvgBusyChPercentage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA/AP performs clear channel assessment before transmitting on the 802.11 wireless
channel. BusyChannel variable reports the time (in % ) that channel was busy during
the last 100 seconds. Channel is busy either because there is interference with energy
above a threshold (-62dBm) or because there is active transmission of other STA or AP.
BusyChannel is indicator of the congestions and interference on the channel. Variable
is reported as average over the last 100 seconds."
::= { dot11ExtRadioStatsEntry 39 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.40
dot11ExtRadioMaxBusyChPercentage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA/AP performs clear channel assessment before transmitting on the 802.11 wireless
channel. BusyChannel variable reports the maximum time (in % ) that channel was busy
during the last 100 seconds. Channel is busy either because there is an interference
with energy above a threshold (-62dBm) or because there is an active transmission of
other STA or AP. BusyChannel is indicator of the congestions and interference on the
channel. Variable is reported as maximum over the last 100 seconds."
::= { dot11ExtRadioStatsEntry 40 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.41
dot11ExtRadioAvgRxChOccPercentage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxOccupancy variable reports the time (in %) AP received valid 802.11 frames on the
radio receiver during the last 100 seconds. Variable counts all 802.11 frames sensed
on the channel, including the frames not destined to this AP and rejected by the AP.
Variable does not count signals (interference) that is not recognized as valid 802.11
signal. Variable is reported as average over the last 100 seconds."
::= { dot11ExtRadioStatsEntry 41 }
-- 1.3.6.1.4.1.4329.15.3.1.4.3.1.42
dot11ExtRadioMaxRxChOccPercentage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxOccupancy variable reports the maximum time (in %) AP received valid 802.11 frames
on the radio receiver during the last 100 seconds. Variable counts all the 802.11
frames sensed on the channel, including the frames not destined to this AP and rejected
by the AP. Variable does not count signals (interference) that is not recognized as
valid 802.11 signal. Variable is reported as max over the last 100 seconds."
::= { dot11ExtRadioStatsEntry 42 }
-- 1.3.6.1.4.1.4329.15.3.1.5
dot11ExtConformance OBJECT IDENTIFIER ::= { dot11ExtnsMib 5 }
-- this module
-- 1.3.6.1.4.1.4329.15.3.1.5.1
hiPathWirelessDot11ExtModule MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"HIPATH-WIRELESS-DOT11-EXTNS module compliance."
MODULE -- this module
MANDATORY-GROUPS { hiPathWirelessDot11ExtGroups, dot11nConfigGroup, assocGroupGroup, assocCountersGroup,
dot11ExtRadioStatsGroup}
::= { dot11ExtConformance 1 }
-- 1.3.6.1.4.1.4329.15.3.1.5.2
hiPathWirelessDot11ExtGroups OBJECT-GROUP
OBJECTS { dot11ExtSSIDID, dot11ExtSSID, dot11ExtWEPKeyMappingIndex, dot11ExtWEPKeyMappingAddress, dot11ExtWEPKeyMappingWEPOn,
dot11ExtWEPKeyMappingValue, dot11ExtWEPKeyMappingStatus, dot11gEnabled, dot11gProtectionMode, dot11gProtectionType,
smtShortPreambleInvoked, dot11ExtBSSID, dot11ExtBSSIDWEPKeyIndex, dot11bEnabled, dot11Capabilities,
dot11ExtBSSIndex, dot11ExtSSIDSuppress, dot11ExtPriorityTrafficHandling, dot11gProtectionRate, dot1XWPA2Enabled,
dot1XEnabled, dot1XDynamicRekeyingInterval, dot1XWPA1Enabled, dot1XWPAPassphrase, dot1XWPACipherType,
dot11ExtSmtMinBasicRate, dot11ExtSmtMaxBasicRate, dot11ExtSmtMaxOperationalRate, dot11DiversityTxDiversity, dot11DiversityRxDiversity,
dot1XConfigKeyManagement, dot11ExtSmtTVOretries, dot11ExtSmtCurChanSelectedByAP, dot11ExtSmtRFDomain, dot11ExtSmtAutoTxPowerCtrl,
dot11ExtSmtCurrentTxPowerLevel, dot11ExtSmtMaxTxPower, dot11ExtSmtMinTxPower, dot11ExtSmtAutoTxPowerCtrlAdjust, dot11ExtSmtBGretries,
dot11ExtSmtBEretries, dot11ExtSmtVIretries, dot11ExtSmtVOretries, dot11gProtectionModeSelected, dot1XWPA2CipherType,
dot11ExtSmtCurrentChannel, dot11ExtSmtDcsMode, dot11ExtSmtDcsNoiseThreshold, dot11ExtSmtDcsChlOccThreshold, dot11ExtSmtDcsUpdatePeriod,
dot11ExtSmtDcsChannelSelection, dot11ExtSmtDcsChannelList, dot11AntennaSelection, dot11ExtSmtRadioAttenuation, dot11ExtSmtProbeSuppression,
dot11ExtSmtForceDisassociate, dot11ExtSmtRssThreshold
}
STATUS current
DESCRIPTION
"High Path Wireless DOT11-EXTNS object-group."
::= { dot11ExtConformance 2 }
-- 1.3.6.1.4.1.4329.15.3.1.5.3
hiPathWirelessDot11ObsoleteGroups OBJECT-GROUP
OBJECTS { vlanBridgeMode, dot11gBasicG, dot11BasicB, vlanTag }
STATUS obsolete
DESCRIPTION
"Objects in this list are obsolete."
::= { dot11ExtConformance 3 }
-- 1.3.6.1.4.1.4329.15.3.1.5.4
dot11EWCGroups OBJECT IDENTIFIER ::= { dot11ExtConformance 4 }
-- 1.3.6.1.4.1.4329.15.3.1.5.4.1
dot11nConfigGroup OBJECT-GROUP
OBJECTS { dot11nEnabled, dot11nChlBonding, dot11nChlWidth, dot11nChlGuardInterval, dot11nProtectEnabled,
dot11nProtectType, dot11nProtectOffset, dot11nPtotectBusyThr, dot11nAggrMsduEnabled, dot11nAggrMsduMaxLen,
dot11nAggrMpduEnabled, dot11nAggrMpduMaxLen, dot11nAggrMsduSubFrames, dot11nAddbaSupEnabled, dot11nConfigLDPC,
dot11nConfigSTBC, dot11nConfigTXBF }
STATUS current
DESCRIPTION
"Objects in this group contain attributes of dot11n radio."
::= { dot11EWCGroups 1 }
-- 1.3.6.1.4.1.4329.15.3.1.5.4.2
assocGroupGroup OBJECT-GROUP
OBJECTS { assocAddress, assocIfIndex, assocReceivedRSSI, assocTransmittedRSSI, assocReceivedRate,
assocTransmittedRate, assocReceivedFrameCount, assocTransmittedFrameCount, assocReceiveErrors, assocTransmitErrors,
assocTransmitBytes, assocReceiveBytes, assocReceivedRSS, assocDLLostRetriesPackets, assocDLLostRetriesBytes }
STATUS current
DESCRIPTION
"Objects in this group contain information about associated MUs."
::= { dot11EWCGroups 2 }
-- 1.3.6.1.4.1.4329.15.3.1.5.4.3
assocCountersGroup OBJECT-GROUP
OBJECTS { assocAuthenticationCount, assocDeauthenticationCount, assocAssociationCount, assocDeassociationCount, assocReassociationCount
}
STATUS current
DESCRIPTION
"Objects in this group contain stats related to associated MUs."
::= { dot11EWCGroups 3 }
-- 1.3.6.1.4.1.4329.15.3.1.5.4.4
dot11ExtRadioStatsGroup OBJECT-GROUP
OBJECTS { dot11ExtRadioType, dot11ExtRadioInUcastPkts, dot11ExtRadioInMcastPkts, dot11ExtRadioInBcastPkts, dot11ExtRadioInOctets,
dot11ExtRadioInErrors, dot11ExtRadioInDiscardsPkts, dot11ExtRadioOutUcastPkts, dot11ExtRadioOutMcastPkts, dot11ExtRadioOutBcastPkts,
dot11ExtRadioOutOctets, dot11ExtRadioOutErrors, dot11ExtRadioOutDiscardsPkts, dot11ExtRadioWepIcvErrorCount, dot11ExtRadioWepExcludedCount,
dot11ExtRadioRetryCount, dot11ExtRadioMultipleRetryCount, dot11ExtRadioRtsSuccessCount, dot11ExtRadioRtsFailCount, dot11ExtRadioAckFailCount,
dot11ExtRadioFrameDupCount, dot11ExtRadioTransFragCount, dot11ExtRadioMulTransFrameCount, dot11ExtRadioFailedCount, dot11ExtRadioReceivedFragCount,
dot11ExtRadioMulRecFrameCount, dot11ExtRadioFcsErrorCount, dot11ExtRadioWepUndecrypCount, dot11ExtRadioTransFrameCount, dot11ExtRadioDeauthCacCount,
dot11ExtRadioAvgNfCount, dot11ExtRadioMaxNfCount, dot11ExtRadioAvgChlOccCount, dot11ExtRadioMaxChlOccCount, dot11ExtRadioAvgTxOccCount,
dot11ExtRadioMaxTxOccCount, dot11ExtRadioAvgRxOccCount, dot11ExtRadioMaxRxOccCount, dot11ExtRadioAvgBusyChPercentage, dot11ExtRadioMaxBusyChPercentage,
dot11ExtRadioAvgRxChOccPercentage, dot11ExtRadioMaxRxChOccPercentage }
STATUS current
DESCRIPTION
"Objects in this group contain statistics related a radio."
::= { dot11EWCGroups 4 }
END