mibs/extreme/BROCADE-MPLS-MIB
-- MIB File: BROCADE-MPLS-MIB.mib
-- *********************************************************************
-- BROCADE-MPLS-MIB.mib: Extreme MPLS MIB
--
-- Copyright (c) 2018 Extreme Networks, Inc.
-- All rights reserved.
--
-- *********************************************************************
BROCADE-MPLS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32, Counter32, Counter64, IpAddress, Integer32
FROM SNMPv2-SMI
DisplayString, TimeStamp, RowStatus
FROM SNMPv2-TC
TruthValue,TEXTUAL-CONVENTION
FROM SNMPv2-TC
MplsTunnelAffinity
FROM MPLS-TC-STD-MIB
bcsiModules
FROM Brocade-REG-MIB
;
brocadeMplsMIB MODULE-IDENTITY
LAST-UPDATED "201805291200Z" -- May 29, 2018 12:00pm
ORGANIZATION "Extreme Networks, Inc."
CONTACT-INFO
"Postal: Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119 USA
Phone: +1 408 579-2800
E-mail: support@extremenetworks.com
WWW: http://www.extremenetworks.com"
DESCRIPTION
"This is Extreme's proprietary MIB module for Multi-Protocol Label Switched Paths.
Copyright (c) 2018 Extreme Networks, Inc.
All rights reserved.
This Extreme Networks SNMP Management Information Base Specification
embodies Extreme Networks' confidential and proprietary
intellectual property. Extreme Networks retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Extreme Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment."
REVISION "201805291200Z" -- May 29, 2018 12:00pm
DESCRIPTION
"Updated ORGANIZATION and CONTACT-INFO with Extreme Networks"
REVISION "201609280000Z" -- 28 September 2016
DESCRIPTION
"Moved the OIDs for this MIB from foundry to Extreme (bcsi) tree."
REVISION "201305290000Z" -- 29 May 2013
DESCRIPTION
"Changed mplsLspName and mplsLspPathName size to 64 from 32 and 16 respectively."
REVISION "201006020000Z" -- 04 June 2010
DESCRIPTION
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
REVISION "200802060000Z" -- Feb 6, 2008
DESCRIPTION
"Add support for proprietary extensions to the VLL and VPLS mib."
::= { bcsiModules 10 }
bcsiMplsNotifications OBJECT IDENTIFIER ::= { brocadeMplsMIB 0 }
bcsiMplsObjects OBJECT IDENTIFIER ::= { brocadeMplsMIB 1 }
bcsiMplsConformance OBJECT IDENTIFIER ::= { brocadeMplsMIB 2 }
-- Textual Conventions
ClassOfService ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Class Of Service (COS) value of a given management entity.
Value 255 means that COS is not explicitly configured. Valid COS values
are between 0 and 7."
SYNTAX Unsigned32(0..7 | 255)
-- Objects
bcsiMplsInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 1 }
bcsiMplsLspInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 2 }
bcsiMplsVllInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 3 }
bcsiMplsVplsInfo OBJECT IDENTIFIER ::= { bcsiMplsObjects 4 }
bcsiMplsVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MPLS version number."
::= { bcsiMplsInfo 1 }
--
-- Administrative groups, also known as resource classes or link colors,
-- allows MPLS-enabled interfaces to be assigned to various classes.
-- For ease of use to a user, a groupname can be associated to a single or
-- multiple administrative group.
-- Up to 32 administrative groups can be configured on the device.
--
bcsiMplsAdminGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcsiMplsAdminGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of administrative groups (by ID) that have a configured group name."
::= { bcsiMplsInfo 2 }
bcsiMplsAdminGroupEntry OBJECT-TYPE
SYNTAX BcsiMplsAdminGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an administrative group entry."
INDEX { bcsiMplsAdminGroupId }
::= { bcsiMplsAdminGroupTable 1 }
BcsiMplsAdminGroupEntry ::=
SEQUENCE {
bcsiMplsAdminGroupId Unsigned32,
bcsiMplsAdminGroupName DisplayString,
bcsiMplsAdminGroupRowStatus RowStatus
}
bcsiMplsAdminGroupId OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the administrative group ID in 1-based.
The end user of this object must convert this to 0-based since this
maps to the bit position in the constraint-based link selection."
::= { bcsiMplsAdminGroupEntry 1 }
bcsiMplsAdminGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The group name that this administrative group is associated with."
::= { bcsiMplsAdminGroupEntry 2 }
bcsiMplsAdminGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of an entry.
Note: Set request to this table is not supported in this release.
Always returns 'active' for the existing entries."
::= { bcsiMplsAdminGroupEntry 3 }
--
-- MPLS-enabled Interface Table
--
bcsiMplsInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcsiMplsInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of MPLS-enabled Interfaces."
::= { bcsiMplsInfo 3 }
bcsiMplsInterfaceEntry OBJECT-TYPE
SYNTAX BcsiMplsInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an MPLS interface entry."
INDEX { bcsiMplsInterfaceIndex }
::= { bcsiMplsInterfaceTable 1 }
BcsiMplsInterfaceEntry::=
SEQUENCE {
bcsiMplsInterfaceIndex Unsigned32,
bcsiMplsInterfaceAdminGroup MplsTunnelAffinity,
bcsiMplsInterfaceRowStatus RowStatus
}
bcsiMplsInterfaceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the MPLS-enabled port or VE interface."
::= { bcsiMplsInterfaceEntry 1 }
bcsiMplsInterfaceAdminGroup OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies which administrative groups this MPLS-enabled
interface belongs to."
::= { bcsiMplsInterfaceEntry 2 }
bcsiMplsInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of an entry.
Note: Set request to this table is not supported in this release.
Always returns 'active' for the existing entries."
::= { bcsiMplsInterfaceEntry 3 }
bcsiMplsConfiguredLsps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "Number of configured LSPs. Sum of RSVP and static configured LSPs.
DEPRECATED BY mplsTunnelConfigured IN rfc3812-MPLS-TE-STD-MIB."
::= { bcsiMplsLspInfo 1 }
bcsiMplsActiveLsps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION "Number of active LSPs. Sum of RSVP, LDP and static LSPs.
DEPRECATED BY mplsTunnelActive IN rfc3812-MPLS-TE-STD-MIB."
::= { bcsiMplsLspInfo 2 }
--
-- MPLS LSP Table
--
bcsiMplsLspTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcsiMplsLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "List of Configured Label Switched Paths."
::= { bcsiMplsLspInfo 3 }
bcsiMplsLspEntry OBJECT-TYPE
SYNTAX BcsiMplsLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a particular
Label Switched Path."
INDEX { bcsiMplsLspSignalingProto, bcsiMplsLspIndex }
::= { bcsiMplsLspTable 1 }
BcsiMplsLspEntry ::=
SEQUENCE {
bcsiMplsLspSignalingProto INTEGER,
bcsiMplsLspIndex Unsigned32,
bcsiMplsLspName DisplayString,
bcsiMplsLspState INTEGER,
bcsiMplsLspPackets Counter64,
bcsiMplsLspAge TimeStamp,
bcsiMplsLspTimeUp TimeStamp,
bcsiMplsLspPrimaryTimeUp TimeStamp,
bcsiMplsLspTransitions Counter32,
bcsiMplsLspLastTransition TimeStamp,
bcsiMplsLspFrom IpAddress,
bcsiMplsLspTo IpAddress,
bcsiMplsLspPathName DisplayString,
bcsiMplsLspPathType INTEGER,
bcsiMplsLspAdaptive TruthValue,
bcsiMplsLspBfdSessionId Unsigned32,
bcsiMplsLspReoptimizeTimer Unsigned32,
bcsiMplsLspCoS ClassOfService,
bcsiMplsLspHopLimit Unsigned32,
bcsiMplsLspCspf INTEGER,
bcsiMplsLspCspfTieBreaker INTEGER,
bcsiMplsLspFrrMode INTEGER,
bcsiMplsLspFrrSetupPriority Unsigned32,
bcsiMplsLspFrrHoldingPriority Unsigned32,
bcsiMplsLspFrrHopLimit Unsigned32,
bcsiMplsLspFrrBandwidth Unsigned32,
bcsiMplsLspFrrAdmGrpIncludeAny MplsTunnelAffinity,
bcsiMplsLspFrrAdmGrpIncludeAll MplsTunnelAffinity,
bcsiMplsLspFrrAdmGrpExcludeAny MplsTunnelAffinity,
bcsiMplsLspPathSelectMode INTEGER,
bcsiMplsLspPathSelectPathname DisplayString,
bcsiMplsLspPathSelectRevertTimer Unsigned32,
bcsiMplsLspShortcutOspfAllowed TruthValue,
bcsiMplsLspShortcutIsisAllowed TruthValue,
bcsiMplsLspShortcutIsisLevel INTEGER,
bcsiMplsLspShortcutIsisAnnounce TruthValue,
bcsiMplsLspShortcutIsisAnnounceMetric Integer32,
bcsiMplsLspShortcutIsisRelativeMetric Integer32
}
bcsiMplsLspSignalingProto OBJECT-TYPE
SYNTAX INTEGER {
ldp(1),
rsvp(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MPLS signaling protocol used by this LSP."
::= { bcsiMplsLspEntry 1 }
bcsiMplsLspIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of the LSP in the system for a given signaling protocol."
::= { bcsiMplsLspEntry 2 }
bcsiMplsLspName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the Label Switched Path."
::= { bcsiMplsLspEntry 3 }
bcsiMplsLspState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
up(2),
down(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational state of the LSP."
::= { bcsiMplsLspEntry 4 }
bcsiMplsLspPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of egress Layer-3 VPN and IPoMPLS packets
meeting the in-label and tunnel criteria."
::= { bcsiMplsLspEntry 5 }
bcsiMplsLspAge OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The age, since creation of this LSP in 10-millisecond periods."
::= { bcsiMplsLspEntry 6 }
bcsiMplsLspTimeUp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this
LSP has been operational. The percentage up time
can be determined by computing
(bcsiMplsLspTimeUp/bcsiMplsLspAge * 100 %)."
::= { bcsiMplsLspEntry 7 }
bcsiMplsLspPrimaryTimeUp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in 10-millisecond units that this
LSP's primary path has been operational. The
percentage contribution of the primary
path to the operational time is given by
(bcsiMplsLspPrimaryTimeUp/bcsiMplsLspTimeUp * 100) %."
::= { bcsiMplsLspEntry 8 }
bcsiMplsLspTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state transitions (up -> down and
down -> up) this LSP has undergone."
::= { bcsiMplsLspEntry 9 }
bcsiMplsLspLastTransition OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in 10-millisecond units since the last
transition occurred on this LSP."
::= { bcsiMplsLspEntry 10 }
bcsiMplsLspFrom OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Source IP address of this LSP."
::= { bcsiMplsLspEntry 11 }
bcsiMplsLspTo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination IP address of this LSP."
::= { bcsiMplsLspEntry 12 }
bcsiMplsLspPathName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in bcsiMplsLspEntry are meaningless."
::= { bcsiMplsLspEntry 13 }
bcsiMplsLspPathType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
primary(2),
standby(3),
secondary(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of path that is active, i.e., a
primary path, a standby path, or a generic
secondary path. This field is meaningless
unless bcsiMplsLspPathName is not empty"
::= { bcsiMplsLspEntry 14 }
bcsiMplsLspAdaptive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the LSP supports adaptive mechanism or not."
::= { bcsiMplsLspEntry 15 }
bcsiMplsLspBfdSessionId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BFD session ID associated to this LSP. Zero indicates
there is no BFD session for this LSP. Non-zero value is an
index to an entry in the bfdSessTable"
::= { bcsiMplsLspEntry 16 }
bcsiMplsLspReoptimizeTimer OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 300..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds from the beginning of one reoptimization
attempt to the beginning of the next attempt."
::= { bcsiMplsLspEntry 17 }
bcsiMplsLspCoS OBJECT-TYPE
SYNTAX ClassOfService
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Class of Service for this LSP."
::= { bcsiMplsLspEntry 18 }
bcsiMplsLspHopLimit OBJECT-TYPE
SYNTAX Unsigned32 ( 0..255 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hops this LSP can traverse."
::= { bcsiMplsLspEntry 19 }
bcsiMplsLspCspf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if CSPF path calculation is enabled
on this LSP."
::= { bcsiMplsLspEntry 20 }
bcsiMplsLspCspfTieBreaker OBJECT-TYPE
SYNTAX INTEGER {
random(1),
leastFill(2),
mostFill(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tie-breaker to use for selecting CSPF
equal-cost paths. The value of this variable is
meaningless if the bcsiMplsLspCspf is 'disabled'."
::= { bcsiMplsLspEntry 21 }
bcsiMplsLspFrrMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
detour(2),
facility(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates which protection method is to be used
for Fast Reroute. 'detour' means one-to-one backup
and 'facility' for facility backup."
::= { bcsiMplsLspEntry 22 }
bcsiMplsLspFrrSetupPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The setup priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'."
::= { bcsiMplsLspEntry 23 }
bcsiMplsLspFrrHoldingPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'."
::= { bcsiMplsLspEntry 24 }
bcsiMplsLspFrrHopLimit OBJECT-TYPE
SYNTAX Unsigned32 ( 0..255 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hop limit for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'."
::= { bcsiMplsLspEntry 25 }
bcsiMplsLspFrrBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth constraint for MPLS Fast Reroute.
The value 0 means that the detour route uses a
best-effort value for bandwidth.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'."
::= { bcsiMplsLspEntry 26 }
bcsiMplsLspFrrAdmGrpIncludeAny OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative group setting that the device
includes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'."
::= { bcsiMplsLspEntry 27 }
bcsiMplsLspFrrAdmGrpIncludeAll OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative group setting that an interface
must be a member of to be considered in a detour
route for the LSP. Any interface that is not a member
of all the groups is eliminated from consideration.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'."
::= { bcsiMplsLspEntry 28 }
bcsiMplsLspFrrAdmGrpExcludeAny OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative group setting that the device
excludes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'."
::= { bcsiMplsLspEntry 29 }
bcsiMplsLspPathSelectMode OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
manual(2),
unconditional(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the path selection mode to use.
Auto-select is the default mode. I this mode, the
primary path is always selected to carry traffic when
the primary path has stayed operating in the working
state for at least the amount of time specified in
bcsiMplsLspPathSelectRevertTimer.
For manual-select, traffic is switched to a user-
selected path specified in bcsiMplsLspPathSelectPathname
after the selected path has stayed operating in the
working state for at least the amount of time specified
in bcsiMplsLspPathSelectRevertTimer.
For unconditional-select, traffic is switched to and
stays on the selected path regardless of the path's
condition even if it is in a failure state."
::= { bcsiMplsLspEntry 30 }
bcsiMplsLspPathSelectPathname OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user-selected pathname when the bcsiMplsLspPathSelectMode
is either 'manual' or 'unconditional'."
::= { bcsiMplsLspEntry 31 }
bcsiMplsLspPathSelectRevertTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds to wait after the primary or selected
path comes up before traffic reverts to that path.
A value of 0 indicates that it will switch immediately
after the current working path goes down."
::= { bcsiMplsLspEntry 32 }
bcsiMplsLspShortcutOspfAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that this LSP allows shortcut between nodes in an AS.
OSPF includes the LSP in its SPF calculation."
::= { bcsiMplsLspEntry 33 }
bcsiMplsLspShortcutIsisAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that this LSP allows shortcut through the
network to a destination based on the path's cost (metric).
Traffic is forwarded through this LSP to destinations
within the IS-IS routing domain. IS-IS includes the LSP
in its SPF calculation."
::= { bcsiMplsLspEntry 34 }
bcsiMplsLspShortcutIsisLevel OBJECT-TYPE
SYNTAX INTEGER {
level1(1),
level2(2),
level1and2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the level of IS-IS routing enabled on the device.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAllowed is 'false'."
::= { bcsiMplsLspEntry 35 }
bcsiMplsLspShortcutIsisAnnounce OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates that this IS-IS shortcut will be announced or
advertised. The metric to announce is specified by
bcsiMplsLspShortcutIsisAnnounceMetric.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAllowed is 'false'."
::= { bcsiMplsLspEntry 36 }
bcsiMplsLspShortcutIsisAnnounceMetric OBJECT-TYPE
SYNTAX Integer32 (1..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the metric value to announce for this shortcut.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAnnounce is 'false'. Default value is 10."
::= { bcsiMplsLspEntry 37 }
bcsiMplsLspShortcutIsisRelativeMetric OBJECT-TYPE
SYNTAX Integer32 (-16777215..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the relative metric used to compute the LSP cost
when announce is not enabled.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAllowed is 'false'."
::= { bcsiMplsLspEntry 38 }
-- definition of MPLS traps
--
bcsiMplsLspUpNotification NOTIFICATION-TYPE
OBJECTS { bcsiMplsLspName,
bcsiMplsLspPathName } -- LspPath
STATUS current
DESCRIPTION
"An bcsiMplsLspUpNotification trap signifies that the
specified LSP is up. The current active
path for the LSP is bcsiMplsLspPathName."
--#TYPE "Foundry Trap: MPLS LSP Up"
--#SUMMARY "LSP %s using path %s is up."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= { bcsiMplsNotifications 1 }
bcsiMplsLspDownNotification NOTIFICATION-TYPE
OBJECTS { bcsiMplsLspName,
bcsiMplsLspPathName } -- LspPath
STATUS current
DESCRIPTION
"An bcsiMplsLspDownNotification trap signifies that the
specified LSP is down, because the current
active path bcsiMplsLspPathName went down."
--#TYPE "Foundry Trap: MPLS LSP Down"
--#SUMMARY "LSP %s using path %s is down."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= { bcsiMplsNotifications 2 }
bcsiMplsLspChangeNotification NOTIFICATION-TYPE
OBJECTS { bcsiMplsLspName,
bcsiMplsLspPathName } -- LspPath
STATUS current
DESCRIPTION
"An bcsiMplsLspChangeNotification trap signifies that the
the specified LSP has switched traffic to
the new active path 'toLspPath'. The LSP maintains
up state before and after the switch over"
--#TYPE "Foundry Trap: MPLS LSP Change"
--#SUMMARY "LSP %s switches to new active path %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= { bcsiMplsNotifications 3 }
END