mibs/fiberhome/WRI-DEVICE-MIB
--
-- WRI-DEVICE-MIB.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 349
-- Monday, November 16, 2015 at 16:55:37
--
WRI-DEVICE-MIB DEFINITIONS ::= BEGIN
IMPORTS
TimeTicks, Unsigned32, Counter32, OBJECT-TYPE, NOTIFICATION-TYPE
FROM SNMPv2-SMI
PhysAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC
wriProducts, wriProtocol
FROM WRI-SMI;
--
-- Type definitions
--
PortList ::= OCTET STRING (SIZE (0..1024))
-- Similarly, all representations of Bridge-Id in this MIB
-- Module use, as a textual convention (i.e. this
-- convention does not affect their encoding), the data
-- type:
BridgeId ::= OCTET STRING (SIZE (8))
--
-- Textual conventions
--
DisplayString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"8 bit octet."
SYNTAX OCTET STRING
RerRingDir ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the ringlet on which the OAM action
request/response is sent/replied."
SYNTAX INTEGER
{
west(0),
east(1)
}
EntryStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"entry status."
SYNTAX INTEGER
{
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
VlanId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A 12-bit VLAN ID used in the VLAN Tag header."
SYNTAX INTEGER (1..4094)
--
-- Node definitions
--
-- Multiple Services Ring (MSPP)
mspp OBJECT IDENTIFIER ::= { wriProducts 8012 }
msppChassis OBJECT IDENTIFIER ::= { mspp 1 }
msppDev OBJECT IDENTIFIER ::= { mspp 2 }
-- the
-- Bridge-Identifier
-- as used in the
-- Spanning Tree
-- Protocol to uniquely identify a bridge. Its first two
-- octets (in network byte order) contain a priority
-- value and its last 6 octets contain the MAC address
-- used to refer to a bridge in a unique fashion
-- (typically, the numerically smallest MAC address
-- of all ports on the bridge).
msppDevGeneral OBJECT IDENTIFIER ::= { msppDev 1 }
msppDevMac OBJECT-TYPE
SYNTAX PhysAddress (SIZE (0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"mac address."
::= { msppDevGeneral 1 }
msppDevDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Node desription."
::= { msppDevGeneral 2 }
msppDevHwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Node desription."
::= { msppDevGeneral 3 }
msppDevSwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Node desription."
::= { msppDevGeneral 4 }
msppDevCardBits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Node card bitmap."
::= { msppDevGeneral 5 }
msppDevCardNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Node index."
::= { msppDevGeneral 6 }
msppDevLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"in seconds."
::= { msppDevGeneral 7 }
msppDevUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"in seconds."
::= { msppDevGeneral 8 }
msppDevTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set and get string format: 'yyyy/mm/dd hh:mm:ss'."
::= { msppDevGeneral 9 }
msppDevFlushMac OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"counter value."
::= { msppDevGeneral 10 }
msppDevReboot OBJECT-TYPE
SYNTAX INTEGER
{
reboot(1),
writeconfigandreboot(2),
writeconfigandrebootsys(3),
eraseconfigandreboot(4),
eraseconfigandrebootsys(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"reboot"
::= { msppDevGeneral 11 }
msppDevCfgFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 12 }
msppDevCfgAction OBJECT-TYPE
SYNTAX INTEGER
{
write(1),
erase(2),
exec(3),
upgrade(4),
writestartup(5),
erasestartup(6),
execstartup(7),
upgradestartup(8),
writebackup(9),
erasebackup(10),
execbackup(11),
upgradebackup(12),
writeboth(13),
eraseboth(14),
upgradeboth(15),
recoverconfig(16)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 13 }
msppDevOsFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 14 }
msppDevOsAction OBJECT-TYPE
SYNTAX INTEGER
{
upgradebootos(1),
upgradebootosandreboot(2),
upgrademainos(3),
upgradebakos(4),
upgradebothos(5),
recoverbootos(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 15 }
msppDevVer OBJECT-TYPE
SYNTAX INTEGER
{
mspp1(1),
mspp2EO(2),
mspp2O(3),
mspp3(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter value."
::= { msppDevGeneral 16 }
msppDevErrorBits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter value."
::= { msppDevGeneral 17 }
msppDevTemperatureLThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"current Temperature lowhest threshold."
::= { msppDevGeneral 18 }
msppDevTemperatureHThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"current Temperature lowhest threshold."
::= { msppDevGeneral 19 }
msppDevTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"current Temperature lowhest threshold."
::= { msppDevGeneral 20 }
msppDevTemperatureTrapEnable OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"current Temperature highhest threshold."
::= { msppDevGeneral 21 }
msppDevWRED OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"weighted random early discard.enable or disable"
::= { msppDevGeneral 22 }
msppDevMirrorToPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 23 }
msppDevMirrorMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 24 }
msppDevLcd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 25 }
msppDevTDMVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 26 }
msppDevFtpd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 27 }
msppDevTelnetd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 28 }
msppDevMirrorToRspanVid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 29 }
msppDevMirrorToTpid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NULL"
::= { msppDevGeneral 30 }
msppRebootFileMode OBJECT-TYPE
SYNTAX INTEGER
{
master(0),
backup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"reboot config file by master config file or backup config file. default:master."
::= { msppDevGeneral 31 }
msppFileExecMode OBJECT-TYPE
SYNTAX INTEGER
{
master(0),
backup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"exec config file by master config file or backup config file. default:master."
::= { msppDevGeneral 32 }
msppUpgradeBkOs OBJECT-TYPE
SYNTAX INTEGER
{
master(0),
backup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"upgrade master os or backup os. default:master."
::= { msppDevGeneral 33 }
msppInbandIp OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"inband ip address."
::= { msppDevGeneral 34 }
msppOutbandIp OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"outband ip address."
::= { msppDevGeneral 35 }
resetEraseCfg OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"erase config file when press reset button long. enable: erase."
::= { msppDevGeneral 36 }
msppDevLicenseEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable license key function. If you want to enable license key function, please designate 'msppDevLicenseKey' first "
::= { msppDevGeneral 37 }
msppDevLicenseKey OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"licnese key."
::= { msppDevGeneral 38 }
msppDevSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"serial num."
::= { msppDevGeneral 39 }
msppDevMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the largest datagram which can be sent/received on the equipment."
::= { msppDevGeneral 40 }
msppDevFlushDynamicArp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flush all dynamic arp."
::= { msppDevGeneral 41 }
msppDevFlushStaticArp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flush all static arp."
::= { msppDevGeneral 42 }
msppDevFlushAllArp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flush all the arp."
::= { msppDevGeneral 43 }
msppDevBootOs OBJECT-TYPE
SYNTAX INTEGER
{
main(0),
backup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Boot os imgage."
::= { msppDevGeneral 44 }
msppDevBootCfg OBJECT-TYPE
SYNTAX INTEGER
{
main(0),
backup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Boot configuration."
::= { msppDevGeneral 45 }
msppl2HashMode OBJECT-TYPE
SYNTAX INTEGER
{
crc32-upper(1),
crc32-lower(2),
lsb(3),
crc16-lower(4),
crc16-upper(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 hash mode configuration."
::= { msppDevGeneral 46 }
msppl3HashMode OBJECT-TYPE
SYNTAX INTEGER
{
crc32-upper(1),
crc32-lower(2),
lsb(3),
crc16-lower(4),
crc16-upper(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L3 hash mode configuration."
::= { msppDevGeneral 47 }
msppl2AuxHashMode OBJECT-TYPE
SYNTAX INTEGER
{
zero(0),
crc32-upper(1),
crc32-lower(2),
lsb(3),
crc16-lower(4),
crc16-upper(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 aux-hash mode configuration."
::= { msppDevGeneral 48 }
msppIpv4AddrNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ipv4 address."
::= { msppDevGeneral 49 }
msppDevCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device code."
::= { msppDevGeneral 50 }
msppCmuState OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cmu State.whether cmu is insert"
::= { msppDevGeneral 51 }
msppDevTpid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protocol ID.0x8100 for 802.1q in 802.1q,0x9100 for none 802.1q in 802.1q"
::= { msppDevGeneral 52 }
msppDevLoggingInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Logging info"
::= { msppDevGeneral 53 }
loggingTrapObjects OBJECT IDENTIFIER ::= { msppDevGeneral 54 }
loggingTrap NOTIFICATION-TYPE
OBJECTS { msppDevMac, msppDevDescr, msppDevLoggingInfo }
STATUS current
DESCRIPTION
"Logging trap."
::= { loggingTrapObjects 1 }
msppDevFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 55 }
msppDevFileAction OBJECT-TYPE
SYNTAX INTEGER { delet(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 56 }
msppShareVlanEn OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 57 }
msppUpgradeStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { msppDevGeneral 58 }
msppCliVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { msppDevGeneral 59 }
msppSnmpVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { msppDevGeneral 60 }
msppHttpVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { msppDevGeneral 61 }
END
--
-- WRI-DEVICE-MIB.mib
--