mibs/foundry/FOUNDRY-SN-MAC-AUTHENTICATION-MIB
FOUNDRY-SN-MAC-AUTHENTICATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
MacAddress, TimeStamp
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB;
snMacAuth MODULE-IDENTITY
LAST-UPDATED "201006020000Z" -- 04 June 2010
ORGANIZATION "Brocade Communications Systems, Inc."
CONTACT-INFO
"Technical Support Center
130 Holger Way,
San Jose, CA 95134
Email: ipsupport@brocade.com
Phone: 1-800-752-8061
URL: www.brocade.com"
DESCRIPTION
"Management Information Base module for MAC authentication
configuration and statistics.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment."
REVISION "201006020000Z" -- 04 June 2010
DESCRIPTION
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
REVISION "200706250000Z" -- June 25, 2007
DESCRIPTION
""
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) foundry(1991) products(1) switch(1) snSwitch(3) 28 }
-- MAC Authentication MIBs
snMacAuthGlobal OBJECT IDENTIFIER ::= { snMacAuth 1 }
snMacAuthClearGlobalCmd OBJECT-TYPE
SYNTAX INTEGER { valid(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clear MAC Authentication table for all ports."
::= { snMacAuthGlobal 1 }
snMacAuthGlobalConfigState OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable MAC authentication on the global level."
::= { snMacAuthGlobal 2 }
--
-- MAC Authentication Clear Interface command Table
--
snMacAuthClearIfCmdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacAuthClearIfCmdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The status of clearing an MAC Authentication entry for an interface."
::= { snMacAuth 2 }
snMacAuthClearIfCmdEntry OBJECT-TYPE
SYNTAX SnMacAuthClearIfCmdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of clearing an MAC Authentication entry for an interface."
INDEX { snMacAuthClearIfCmdIfIndex }
::= { snMacAuthClearIfCmdTable 1 }
SnMacAuthClearIfCmdEntry ::= SEQUENCE {
snMacAuthClearIfCmdIfIndex InterfaceIndex,
snMacAuthClearIfCmdAction INTEGER
}
snMacAuthClearIfCmdIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ifIndex value of the local interface on which a clear command is issued and monitored."
::= { snMacAuthClearIfCmdEntry 1 }
snMacAuthClearIfCmdAction OBJECT-TYPE
SYNTAX INTEGER { valid(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clearing an MAC Authentication entry for an interface."
::= { snMacAuthClearIfCmdEntry 2 }
--
-- MAC Authentication Table
--
snMacAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC Authentication table."
::= { snMacAuth 3 }
snMacAuthEntry OBJECT-TYPE
SYNTAX SnMacAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the MAC Authentication table."
INDEX { snMacAuthIfIndex, snMacAuthVlanId, snMacAuthMac }
::= { snMacAuthTable 1 }
SnMacAuthEntry ::= SEQUENCE {
snMacAuthIfIndex InterfaceIndex,
snMacAuthVlanId Integer32,
snMacAuthMac MacAddress,
snMacAuthState INTEGER,
snMacAuthTimeStamp TimeStamp,
snMacAuthAge Integer32,
snMacAuthDot1x INTEGER
}
snMacAuthIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 2863."
::= { snMacAuthEntry 1 }
snMacAuthVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of a VLAN of which this port is a member. Port must
be untagged. For tagged port which belongs to multiple
VLANs, this object return 0 which is an invalid VLAN ID
value."
::= { snMacAuthEntry 2 }
snMacAuthMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC Address to be authenticated."
::= { snMacAuthEntry 3 }
snMacAuthState OBJECT-TYPE
SYNTAX INTEGER { authenticate(1), unauthenticate(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { snMacAuthEntry 4 }
snMacAuthTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timestamp at which the MAC was authenticated or failed to be authenticated."
::= { snMacAuthEntry 5 }
snMacAuthAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Age of the mac session in which the MAC address is authenticated."
::= { snMacAuthEntry 6 }
snMacAuthDot1x OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the Dot1x is enabled or not."
::= { snMacAuthEntry 7 }
--
-- MAC Authentication MAC Session Clear Table
--
snMacAuthClearMacSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacAuthClearMacSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The status of clearing an MAC Session entry indexed by a MAC address."
::= { snMacAuth 4 }
snMacAuthClearMacSessionEntry OBJECT-TYPE
SYNTAX SnMacAuthClearMacSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of clearing an MAC Session entry indexed by a MAC address."
INDEX { snMacAuthClearMacSessionIfIndex, snMacAuthClearMacSessionMac }
::= { snMacAuthClearMacSessionTable 1 }
SnMacAuthClearMacSessionEntry ::= SEQUENCE {
snMacAuthClearMacSessionIfIndex InterfaceIndex,
snMacAuthClearMacSessionMac MacAddress,
snMacAuthClearMacSessionAction INTEGER
}
snMacAuthClearMacSessionIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ifIndex value of the local interface on which a clear command is issued and monitored."
::= { snMacAuthClearMacSessionEntry 1 }
snMacAuthClearMacSessionMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An MAC Session entry indexed by a MAC address."
::= { snMacAuthClearMacSessionEntry 2 }
snMacAuthClearMacSessionAction OBJECT-TYPE
SYNTAX INTEGER { valid(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clearing an MAC Session entry indexed by a MAC address."
::= { snMacAuthClearMacSessionEntry 3 }
END