mibs/foundry/FOUNDRY-SN-MAC-VLAN-MIB
FOUNDRY-SN-MAC-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
MacAddress
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB;
snMacVlan MODULE-IDENTITY
LAST-UPDATED "200706250000Z" -- June 25, 2007
ORGANIZATION "Foundry Networks, Inc"
CONTACT-INFO
""
DESCRIPTION
"Management Information Base module for MAC-based Vlan
configuration and statistics."
REVISION "200706250000Z" -- June 25, 2007
DESCRIPTION
""
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) foundry(1991) products(1) switch(1) snSwitch(3) 30 }
--
-- Mac-based Vlan
--
snMacVlanGlobalObjects OBJECT IDENTIFIER ::= { snMacVlan 1 }
snMacVlanTableObjects OBJECT IDENTIFIER ::= { snMacVlan 2 }
--
-- MAC-based VLAN Global Scalar Object Section
--
snMacVlanGlobalClearOper OBJECT-TYPE
SYNTAX INTEGER { valid(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clear operational MAC-based Vlan entry for all ports."
::= { snMacVlanGlobalObjects 1 }
snMacVlanGlobalDynConfigState OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable MAC-based VLAN dynamic activation on the global level."
::= { snMacVlanGlobalObjects 2}
--
-- MAC-based VLAN Table Object Section
--
--
-- MAC-based Vlan Port Membership Table
-- Use this table to create or delete a port to a MAC-based Vlan
--
snMacVlanPortMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacVlanPortMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC-based Vlan port membership table."
::= { snMacVlanTableObjects 1 }
snMacVlanPortMemberEntry OBJECT-TYPE
SYNTAX SnMacVlanPortMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of the MAC-based Vlan port membership table."
INDEX { snMacVlanPortMemberVLanId, snMacVlanPortMemberPortId }
::= { snMacVlanPortMemberTable 1 }
SnMacVlanPortMemberEntry ::= SEQUENCE {
snMacVlanPortMemberVLanId INTEGER,
snMacVlanPortMemberPortId InterfaceIndex,
snMacVlanPortMemberRowStatus INTEGER
}
snMacVlanPortMemberVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN identifier (VLAN ID)."
::= { snMacVlanPortMemberEntry 1 }
snMacVlanPortMemberPortId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex which is a member of the MAC-based VLAN."
::= { snMacVlanPortMemberEntry 2 }
snMacVlanPortMemberRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with
value of create(4) returns error
'wrongValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snMacVlanPortMemberEntry 3 }
--
-- MAC-based VLAN Interface Table Object Section
--
snMacVlanIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacVlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC-based Vlan Interface table."
::= { snMacVlanTableObjects 2 }
snMacVlanIfEntry OBJECT-TYPE
SYNTAX SnMacVlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the MAC-based Vlan interface table."
INDEX { snMacVlanIfIndex }
::= { snMacVlanIfTable 1 }
SnMacVlanIfEntry ::= SEQUENCE {
snMacVlanIfIndex InterfaceIndex,
snMacVlanIfEnable INTEGER,
snMacVlanIfMaxEntry Integer32,
snMacVlanIfClearOper INTEGER,
snMacVlanIfClearConfig INTEGER
}
snMacVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex which is a member of the MAC-based VLAN."
::= { snMacVlanIfEntry 1 }
snMacVlanIfEnable OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for
MAC-based Vlan on this interface. The value enabled(1)
indicates that MAC-based Vlan should be enabled on this interface,
When disabled(2), MAC-based Vlan is disabled on this interface.
Enable/disable MAC-based Vlan on this interface."
::= { snMacVlanIfEntry 2 }
snMacVlanIfMaxEntry OBJECT-TYPE
SYNTAX Integer32 (2..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of allowed and denied MAC address
(static and dynamic) that can be leared on an interface.
The default value is 2. The value should be between 2 to 32."
DEFVAL { 2 }
::= { snMacVlanIfEntry 3 }
snMacVlanIfClearOper OBJECT-TYPE
SYNTAX INTEGER { valid(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clearing operational MAC-based Vlan entry for a port."
::= { snMacVlanIfEntry 4 }
snMacVlanIfClearConfig OBJECT-TYPE
SYNTAX INTEGER { valid(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clearing configured MAC-based Vlan entry for a port."
::= { snMacVlanIfEntry 5 }
--
-- MAC-based Vlan Table Object section
--
snMacBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC-based Vlan table."
::= { snMacVlanTableObjects 3 }
snMacBasedVlanEntry OBJECT-TYPE
SYNTAX SnMacBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the MAC-based Vlan table."
INDEX { snMacVlanIfIndex, snMacBasedVlanId, snMacBasedVlanMac }
::= { snMacBasedVlanTable 1 }
SnMacBasedVlanEntry ::= SEQUENCE {
snMacBasedVlanId INTEGER,
snMacBasedVlanMac MacAddress,
snMacBasedVlanPriority Integer32,
snMacBasedVlanRowStatus INTEGER
}
snMacBasedVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of a VLAN of which this port is a mac-vlan-permit
member. Port must be untagged. This object return 0 which is
an invalid VLAN ID value."
::= { snMacBasedVlanEntry 1 }
snMacBasedVlanMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A host source MAC address to be authenticated."
::= { snMacBasedVlanEntry 2 }
snMacBasedVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the source MAC address."
::= { snMacBasedVlanEntry 3 }
snMacBasedVlanRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create and delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is valid"
::= { snMacBasedVlanEntry 4 }
END