mibs/fs/FS-SYSTEM-MIB
-- *****************************************************************
-- FS-SYSTEM-MIB.mib: FS System MIB file
--
-- March 2002, Wuzg
--
-- Copyright (c) 2002 by FS.COM Inc..
-- All rights reserved.
--
-- *****************************************************************
--
FS-SYSTEM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
TimeTicks,
Unsigned32
FROM SNMPv2-SMI
DisplayString,
MacAddress
FROM SNMPv2-TC
Gauge
FROM RFC1155-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
fsApMacAddr
FROM FS-AC-MGMT-MIB
fsMemoryPoolCurrentUtilization
FROM FS-MEMORY-MIB
fsCPUUtilization1Min,
Percent
FROM FS-PROCESS-MIB
fsMgmt
FROM FS-SMI;
fsSystemMIB MODULE-IDENTITY
LAST-UPDATED "200203200000Z"
ORGANIZATION "FS.COM Inc.."
CONTACT-INFO
"
Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html"
DESCRIPTION
"This module defines fs system mibs."
REVISION "200203200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 1}
fsSystemMIBObjects OBJECT IDENTIFIER ::= { fsSystemMIB 1 }
fsSystemHwVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the Revision number of hardware resides
on the FastSwitch."
::= { fsSystemMIBObjects 1 }
fsSystemSwVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the Revision number of software resides
on the FastSwitch."
::= { fsSystemMIBObjects 2 }
fsSystemBootVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the Revision number of BOOT software resides
on the FastSwitch."
::= { fsSystemMIBObjects 3 }
fsSystemSysCtrlVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the Revision number of CTRL software resides
on the FastSwitch."
::= { fsSystemMIBObjects 4 }
fsSystemParametersSave OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Save all parameters changed in configuration by setting
this object to any value but 0, set its value to 0 will
cause no action of agent, otherwise all changes of
prarameters will be saved for retrive when system is
reset, if parameter is changed but not saved all changes
will come to their original value when system down and up
again, when query always return value 0."
::= { fsSystemMIBObjects 5 }
fsSystemOutBandRate OBJECT-TYPE
SYNTAX INTEGER {
baud9600 (1),
baud19200 (2),
baud38400 (3),
baud57600 (4),
baud115200 (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determine the console(OutBand) baud rate :
9600 - 1,19200 - 2, 38300 - 3, 57600 - 4, 115200 - 5,
when the console baud rate is other value will return value 0."
::= { fsSystemMIBObjects 6 }
fsSystemReset OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
restart(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object allow perform soft reset of system by setting its
value to none zero. if a soft resetis performed, after this
having completed a warm start trap will send to declare the state
and when queried will always return 0."
::= { fsSystemMIBObjects 7 }
fsSwitchLayer OBJECT-TYPE
SYNTAX INTEGER {
layer2 (1), -- Layer 2 Switch
layer3 (2), -- Layer 3 Switch
router(3) -- Router
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Which layer's device the switch in system "
::= { fsSystemMIBObjects 8 }
fsSystemHwPower OBJECT-TYPE
SYNTAX INTEGER{
rpsNoLink(1),
rpsLinkAndNoPower(2),
rpsLinkAndReadyForPower(3),
rpsLinkAndPower(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of power."
::= { fsSystemMIBObjects 9 }
fsSystemHwFan OBJECT-TYPE
SYNTAX INTEGER{
work(1),
stop(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of fan."
::= { fsSystemMIBObjects 10 }
--The fsSystemOutBandTimeout is obsoleted after 2007.9
fsSystemOutBandTimeout OBJECT-TYPE
SYNTAX Integer32(0..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The timeout of console.0 indicate that timeout function is disabled."
::= { fsSystemMIBObjects 11 }
--The fsSystemTelnetTimeout is obsoleted after 2007.9
fsSystemTelnetTimeout OBJECT-TYPE
SYNTAX Integer32(0..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The timeout of telnet.0 indicate that timeout function is disabled."
::= { fsSystemMIBObjects 12 }
fsSystemMainFile OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the name of main file on the FastSwitch."
::= { fsSystemMIBObjects 13 }
fsSystemCurrentPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the current power of the FastSwitch."
::= { fsSystemMIBObjects 14 }
fsSystemRemainPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the remain power of the FastSwitch."
::= { fsSystemMIBObjects 15 }
fsSystemTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the temperature of the FastSwitch."
::= { fsSystemMIBObjects 16 }
fsSystemElectricalSourceNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the electrical source number of the FastSwitch."
::= { fsSystemMIBObjects 17 }
fsSystemElectricalSourceIsNormalTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemElectricalSourceIsNormalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of electrical source entries. Each object displays
whether different electrical sources are normal or not."
::= { fsSystemMIBObjects 18 }
fsSystemElectricalSourceIsNormalEntry OBJECT-TYPE
SYNTAX FSSystemElectricalSourceIsNormalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays whether different electrical sources are normal or not."
INDEX { fsSystemElectricalSourceIsNormalIndex }
::= { fsSystemElectricalSourceIsNormalTable 1 }
FSSystemElectricalSourceIsNormalEntry ::=
SEQUENCE {
fsSystemElectricalSourceIsNormalIndex Integer32,
fsSystemElectricalSourceIsNormal INTEGER,
fsSystemElectricalSourceName DisplayString
}
fsSystemElectricalSourceIsNormalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a electrical source."
::= { fsSystemElectricalSourceIsNormalEntry 1 }
fsSystemElectricalSourceIsNormal OBJECT-TYPE
SYNTAX INTEGER {
noexist (1), --no exist
existnopower (2), -- exist no power
existreadypower (3), --exist ready power
normal (4), --normal
powerbutabnormal (5), --power but abnormal
unknow (6) --unknow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether an electrical source is normal or not."
::= { fsSystemElectricalSourceIsNormalEntry 2 }
fsSystemElectricalSourceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of electrical source"
::= { fsSystemElectricalSourceIsNormalEntry 3 }
fsSystemCurrentVoltage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the current voltage of the FastSwitch."
::= { fsSystemMIBObjects 19 }
fsSystemFanNUM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the number of fan on the FastSwitch."
::= { fsSystemMIBObjects 20 }
fsSystemFanIsNormalTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemFanIsNormalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fan entries. Each object displays
whether different fans are normal or not."
::= { fsSystemMIBObjects 21 }
fsSystemFanIsNormalEntry OBJECT-TYPE
SYNTAX FSSystemFanIsNormalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays whether different fans are normal or not."
INDEX { fsSystemFanIsNormalIndex }
::= { fsSystemFanIsNormalTable 1 }
FSSystemFanIsNormalEntry ::=
SEQUENCE {
fsSystemFanIsNormalIndex Integer32,
fsSystemFanIsNormal INTEGER,
fsSystemFanName DisplayString,
fsSystemFanSpeed Integer32
}
fsSystemFanIsNormalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a fan."
::= { fsSystemFanIsNormalEntry 1 }
fsSystemFanIsNormal OBJECT-TYPE
SYNTAX INTEGER {
noexist (1), --no exist
existnopower (2), -- exist no power
existreadypower (3), --exist ready power
normal (4), --normal
powerbutabnormal (5), --power but abnormal
unknow (6) --unknow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether an fan is normal or not."
::= { fsSystemFanIsNormalEntry 2 }
fsSystemFanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of fan"
::= { fsSystemFanIsNormalEntry 3 }
fsSystemFanSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the fan's speed."
::= { fsSystemFanIsNormalEntry 4 }
fsSystemReloadTimeRemain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the remain time of reloading on the FastSwitch."
::= { fsSystemMIBObjects 22 }
fsSystemTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of temperature entries. Each object displays
the temperature information."
::= { fsSystemMIBObjects 23 }
fsSystemTemperatureEntry OBJECT-TYPE
SYNTAX FSSystemTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the temperature information."
INDEX { fsSystemTemperatureIndex }
::= { fsSystemTemperatureTable 1 }
FSSystemTemperatureEntry ::=
SEQUENCE {
fsSystemTemperatureIndex Integer32,
fsSystemTemperatureName DisplayString,
fsSystemTemperatureCurrent Integer32,
fsSystemTemperatureWarningVaule Integer32,
fsSystemTemperatureCritialVaule Integer32
}
fsSystemTemperatureIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device's temperature information."
::= { fsSystemTemperatureEntry 1 }
fsSystemTemperatureName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual name assigned to a temperature chip"
::= { fsSystemTemperatureEntry 2 }
fsSystemTemperatureCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the current temperature of the FastSwitch.The temperature display
is not supported for the current temperature returns to 0."
::= { fsSystemTemperatureEntry 3 }
fsSystemTemperatureWarningVaule OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first warning of temperature of the device CPU."
::= { fsSystemTemperatureEntry 4 }
fsSystemTemperatureCritialVaule OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second warning of temperature of the device CPU."
::= { fsSystemTemperatureEntry 5 }
fsSystemSerialno OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the serial number resides on the FastSwitch.
Or return the serial number resides on the current master engine of a chassis device."
::= { fsSystemMIBObjects 24 }
fsSystemVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of system version entries. Each object displays
the system version information."
::= { fsSystemMIBObjects 25 }
fsSystemVersionEntry OBJECT-TYPE
SYNTAX FSSystemVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the system version information."
INDEX { fsSystemVersionIndex }
::= { fsSystemVersionTable 1 }
FSSystemVersionEntry ::=
SEQUENCE {
fsSystemVersionIndex Unsigned32,
fsSystemVersionName DisplayString,
fsSystemVersionSwBoot DisplayString,
fsSystemVersionSwCtrl DisplayString,
fsSystemVersionSwMain DisplayString,
fsSystemVersionHw DisplayString,
fsSystemVersionSerialno DisplayString
}
fsSystemVersionIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device's system version information."
::= { fsSystemVersionEntry 1 }
fsSystemVersionName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual name assigned to a system version chip"
::= { fsSystemVersionEntry 2 }
fsSystemVersionSwBoot OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the software boot system version of the FastSwitch."
::= { fsSystemVersionEntry 3 }
fsSystemVersionSwCtrl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the software ctrl system version of the FastSwitch."
::= { fsSystemVersionEntry 4 }
fsSystemVersionSwMain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the software main system version of the FastSwitch."
::= { fsSystemVersionEntry 5 }
fsSystemVersionHw OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the hardware system version of the FastSwitch."
::= { fsSystemVersionEntry 6 }
fsSystemVersionSerialno OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the serial number of the FastSwitch."
::= { fsSystemVersionEntry 7 }
--System models added 2010-05
fsSystemSysModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SysModel of equipment."
::={ fsSystemMIBObjects 26 }
fsSystemUptime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SysUptime of equipment,unit is seconds."
::={ fsSystemMIBObjects 27 }
--System Sample Time 2010-05
fsSystemSampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sampling duration."
::={ fsSystemMIBObjects 28 }
fsSystemStatWindowTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Stating duration."
::={ fsSystemMIBObjects 29 }
fsSystemManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the manufacturer."
::= { fsSystemMIBObjects 30 }
fsSystemCurrentTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Return the current time of the system."
::= { fsSystemMIBObjects 31 }
fsSystemWarnResendTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Return the resending time of warn trap of the system."
::= { fsSystemMIBObjects 32 }
fsSystemSoftwareName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the software name of the system."
::= { fsSystemMIBObjects 33 }
fsSystemSoftwareManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the software manufacturer of the system."
::= { fsSystemMIBObjects 34 }
fsSystemCpuType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the cpu type infomation of the system."
::= { fsSystemMIBObjects 35 }
fsSystemMemoryType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the memory type of the system."
::= { fsSystemMIBObjects 36 }
fsSystemMemorySize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the memory card storage of the system."
::= { fsSystemMIBObjects 37 }
fsSystemFlashSize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the flash size of the system."
::= { fsSystemMIBObjects 38 }
--lank ap 2010-7
fsSystemLankApTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemLankApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of lank ap system entries. Each object displays
the lank ap system information."
::= { fsSystemMIBObjects 39 }
fsSystemLankApEntry OBJECT-TYPE
SYNTAX FSSystemLankApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the lank ap system information."
INDEX { fsSystemLankApMacAddr }
::= { fsSystemLankApTable 1 }
FSSystemLankApEntry ::=
SEQUENCE {
fsSystemLankApMacAddr MacAddress,
fsSystemLankApStatWindowTime Integer32,
fsSystemLankApSampleTime Integer32,
fsSystemLankApReset INTEGER,
fsSystemLankApSoftwareName DisplayString,
fsSystemLankApSwVersion DisplayString,
fsSystemLankApSoftwareManufacturer DisplayString,
fsSystemLankApCpuType DisplayString,
fsSystemLankApMemoryType DisplayString,
fsSystemLankApMemorySize Gauge,
fsSystemLankAPFlashSize Gauge,
fsSystemLankApManufacturer DisplayString,
fsSystemLankApSerialno DisplayString,
fsSystemLankApSysModel DisplayString,
fsSystemLankApUptime INTEGER,
fsSystemLankApAccurateUptime TimeTicks,
fsSystemLankApHwVersion DisplayString
}
fsSystemLankApMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents lank ap system information."
::= { fsSystemLankApEntry 1 }
fsSystemLankApStatWindowTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Stating duration of lank ap."
::={ fsSystemLankApEntry 2 }
fsSystemLankApSampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sampling duration of lank ap."
::={ fsSystemLankApEntry 3 }
fsSystemLankApReset OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
restart(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Object allow perform soft reset of lank ap system by setting
its value to none zero. if a soft resetis performed, after this
having completed a warm start trap will send to declare the state
and when queried will always return 0."
::= { fsSystemLankApEntry 4 }
fsSystemLankApSoftwareName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the software name of the lank ap system."
::= { fsSystemLankApEntry 5 }
fsSystemLankApSwVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the Revision number of software resides
on the lank ap FastSwitch."
::= { fsSystemLankApEntry 6 }
fsSystemLankApSoftwareManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the software manufacturer of the lank ap system."
::= { fsSystemLankApEntry 7 }
fsSystemLankApCpuType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the cpu type infomation of the lank ap system."
::= { fsSystemLankApEntry 8 }
fsSystemLankApMemoryType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the memory type of the lank ap system."
::= { fsSystemLankApEntry 9 }
fsSystemLankApMemorySize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the memory card storage of the lank ap system."
::= { fsSystemLankApEntry 10 }
fsSystemLankAPFlashSize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the flash size of the lank ap system."
::= { fsSystemLankApEntry 11 }
fsSystemLankApManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the manufacturer of lank ap."
::= { fsSystemLankApEntry 12}
fsSystemLankApSerialno OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the serial number resides
on the lank ap FastSwitch."
::= { fsSystemLankApEntry 13 }
fsSystemLankApSysModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SysModel of lank ap equipment."
::={ fsSystemLankApEntry 14 }
fsSystemLankApUptime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SysUptime of lank ap equipment."
::={ fsSystemLankApEntry 15 }
fsSystemLankApAccurateUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the accurate system Uptime of ap equipment,unit is ticks"
::={ fsSystemLankApEntry 16 }
fsSystemLankApHwVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the string of the Revision number of hardware resides
on the lank ap FastSwitch."
::= { fsSystemLankApEntry 17 }
fsSystemBoardTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemBoardTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of board temperature entries. Each object displays
the board temperature information."
::= { fsSystemMIBObjects 40 }
fsSystemBoardTemperatureEntry OBJECT-TYPE
SYNTAX FSSystemBoardTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the board temperature information."
INDEX { fsSystemBoardTemperatureIndex }
::= { fsSystemBoardTemperatureTable 1 }
FSSystemBoardTemperatureEntry ::=
SEQUENCE {
fsSystemBoardTemperatureIndex Integer32,
fsSystemBoardTemperatureName DisplayString,
fsSystemBoardTemperatureCurrent Integer32
}
fsSystemBoardTemperatureIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device's board temperature information."
::= { fsSystemBoardTemperatureEntry 1 }
fsSystemBoardTemperatureName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual name assigned to a board temperature chip"
::= { fsSystemBoardTemperatureEntry 2 }
fsSystemBoardTemperatureCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the current board temperature of the FastSwitch.The temperature display
is not supported for the current temperature returns to 0."
::= { fsSystemBoardTemperatureEntry 3 }
fsSystemElectricalInformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemElectricalInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of electrical entries. Each object displays the electrical information."
::= { fsSystemMIBObjects 41 }
fsSystemElectricalInformationEntry OBJECT-TYPE
SYNTAX FSSystemElectricalInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the electrical information."
INDEX {fsSystemElectricalInformationDeviceIndex, fsSystemElectricalInformationIndex }
::= { fsSystemElectricalInformationTable 1 }
FSSystemElectricalInformationEntry ::=
SEQUENCE {
fsSystemElectricalInformationDeviceIndex Integer32,
fsSystemElectricalInformationIndex Integer32,
fsSystemElectricalInformationStatus INTEGER,
fsSystemElectricalInformationType DisplayString,
fsSystemElectricalInformationAttribute DisplayString,
fsSystemElectricalInformationSofeVersion DisplayString,
fsSystemElectricalInformationHardwareVersion DisplayString,
fsSystemElectricalInformationSerial DisplayString,
fsSystemElectricalInformationProductionDate DisplayString,
fsSystemElectricalInformationRatedPower Integer32,
fsSystemElectricalInformationInVoltage Integer32,
fsSystemElectricalInformationInCurrent Integer32,
fsSystemElectricalInformationOutVoltage Integer32,
fsSystemElectricalInformationOutCurrent Integer32,
fsSystemElectricalInformationOutPower Integer32,
fsSystemElectricalInformationTemperature Integer32,
fsSystemElectricalInformationAirflowCoexist DisplayString,
fsSystemElectricalInformationWarningStatus DisplayString
}
fsSystemElectricalInformationDeviceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device."
::= { fsSystemElectricalInformationEntry 1 }
fsSystemElectricalInformationIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a electriacl."
::= { fsSystemElectricalInformationEntry 2 }
fsSystemElectricalInformationStatus OBJECT-TYPE
SYNTAX INTEGER {
noexist (1), --no exist
existnopower (2), -- exist no power
existreadypower (3), --exist ready power
normal (4), --normal
powerbutabnormal (5), --power but abnormal
unknow (6) --unknow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether an electrical source is normal or not.
If the electrical is no exist, the other of electrical information maybe
return nothing information and 0."
::= { fsSystemElectricalInformationEntry 3 }
fsSystemElectricalInformationType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the type of the electrical. If the device is no support this information,
This object will return nothing information."
::= { fsSystemElectricalInformationEntry 4 }
fsSystemElectricalInformationAttribute OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays attribute of the electrical. If the device is no support
this information, This object will return nothing information."
::= { fsSystemElectricalInformationEntry 5 }
fsSystemElectricalInformationSofeVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the sofe version of the electrical. If the device is no support
this information, This object will return nothing information."
::= { fsSystemElectricalInformationEntry 6}
fsSystemElectricalInformationHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the hardware version of the electrical. If the device is no support
this information, This object will return nothing information."
::= { fsSystemElectricalInformationEntry 7 }
fsSystemElectricalInformationSerial OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the serial of the electrical. If the device is no support
this information, This object will return nothing information."
::= { fsSystemElectricalInformationEntry 8 }
fsSystemElectricalInformationProductionDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the productiron date of the electrical. If the device is no support
this information, This object will return nothing information."
::= { fsSystemElectricalInformationEntry 9 }
fsSystemElectricalInformationRatedPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the rated power(Unit: W) of the electrical. If the device is no support
this information, This object will return 0."
::= { fsSystemElectricalInformationEntry 10 }
fsSystemElectricalInformationInVoltage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the input voltage(Unit: V) of the electrical. If the device is no support
this information, This object will return 0."
::= { fsSystemElectricalInformationEntry 11 }
fsSystemElectricalInformationInCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the input current(Unit: mA) of the electrical. If the device is no support
this information, This object will return 0."
::= { fsSystemElectricalInformationEntry 12 }
fsSystemElectricalInformationOutVoltage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the output voltage(Unit: V) of the electrical. If the device is no support
this information, This object will return 0."
::= { fsSystemElectricalInformationEntry 13 }
fsSystemElectricalInformationOutCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the output current(Unit: mA) of the electrical. If the device is no support
this information, This object will return 0."
::= { fsSystemElectricalInformationEntry 14 }
fsSystemElectricalInformationOutPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the output power(Unit: W) of the electrical. If the device is no support
this information, This object will return 0."
::= { fsSystemElectricalInformationEntry 15 }
fsSystemElectricalInformationTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the temperature(Unit: C) of the electrical. If the device is no support
this information, This object will return -255."
::= { fsSystemElectricalInformationEntry 16 }
fsSystemElectricalInformationAirflowCoexist OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the airflow coexist of the electrical. If the device is no support
this information, This object will return nothing information."
::= { fsSystemElectricalInformationEntry 17 }
fsSystemElectricalInformationWarningStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the warning status of the electrical. If the device is no support
this information, This object will return nothing information."
::= { fsSystemElectricalInformationEntry 18 }
fsSystemFanInformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemFanInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fan entries. Each object displays the fan information."
::= { fsSystemMIBObjects 42 }
fsSystemFanInformationEntry OBJECT-TYPE
SYNTAX FSSystemFanInformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the fan information."
INDEX { fsSystemFanInformationDeviceIndex , fsSystemFanInformationFanIndex}
::= {fsSystemFanInformationTable 1 }
FSSystemFanInformationEntry ::=
SEQUENCE {
fsSystemFanInformationDeviceIndex Integer32,
fsSystemFanInformationFanIndex Integer32,
fsSystemFanInformationStatus INTEGER,
fsSystemFanInformationType DisplayString,
fsSystemFanInformationAttribute DisplayString,
fsSystemFanInformationSofeVersion DisplayString,
fsSystemFanInformationFirmwareVersion DisplayString,
fsSystemFanInformationHardwareVersion DisplayString,
fsSystemFanInformationSerial DisplayString,
fsSystemFanInformationProductionDate DisplayString,
fsSystemFanInformationTemperature Integer32,
fsSystemFanInformationNumber Integer32,
fsSystemFanInformationAirflowCoexist DisplayString,
fsSystemFanInformationWarningStatus DisplayString
}
fsSystemFanInformationDeviceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device."
::= { fsSystemFanInformationEntry 1 }
fsSystemFanInformationFanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a fan device."
::= { fsSystemFanInformationEntry 2 }
fsSystemFanInformationStatus OBJECT-TYPE
SYNTAX INTEGER {
noexist (1), --no exist
existnopower (2), --exist no power
existreadypower (3), --exist ready power
normal (4), --normal
powerbutabnormal (5), --power but abnormal
unknow (6) --unknow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether an fan device source is exist or not.
If the fan device is no exist, the other of fan information maybe
return nothing information and 0."
::= { fsSystemFanInformationEntry 3 }
fsSystemFanInformationType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the type of the fan. If the device is no support this information,
This object will return nothing information."
::= { fsSystemFanInformationEntry 4 }
fsSystemFanInformationAttribute OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays attribute of the fan. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 5 }
fsSystemFanInformationSofeVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the sofe version of the fan. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 6}
fsSystemFanInformationFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the firmware version of the fan. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 7 }
fsSystemFanInformationHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the hardware version of the fan. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 8 }
fsSystemFanInformationSerial OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the serial of the fan. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 9 }
fsSystemFanInformationProductionDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the productiron date of the fan. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 10 }
fsSystemFanInformationTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the temperature of the fan device. If the device is no support
this information, This object will return -255."
::= { fsSystemFanInformationEntry 11 }
fsSystemFanInformationNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the number of the fan device. If the device is no support
this information, This object will return 0."
::= { fsSystemFanInformationEntry 12 }
fsSystemFanInformationAirflowCoexist OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the airflow coexist of the fan device. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 13 }
fsSystemFanInformationWarningStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the warning status of the fan device. If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanInformationEntry 14 }
fsSystemFanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fan status entries. Each object displays the fan status information."
::= { fsSystemMIBObjects 43 }
fsSystemFanStatusEntry OBJECT-TYPE
SYNTAX FSSystemFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the fan status information."
INDEX { fsSystemFanStatusDeviceIndex,
fsSystemFanStatusFanIndex,
fsSystemFanStatusIndex }
::= {fsSystemFanStatusTable 1 }
FSSystemFanStatusEntry ::=
SEQUENCE {
fsSystemFanStatusDeviceIndex Integer32,
fsSystemFanStatusFanIndex Integer32,
fsSystemFanStatusIndex Integer32,
fsSystemFanStatus INTEGER,
fsSystemFanStatusLevel Integer32,
fsSystemFanStatusSpeed Integer32
}
fsSystemFanStatusDeviceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device."
::= { fsSystemFanStatusEntry 1 }
fsSystemFanStatusFanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a fan device."
::= { fsSystemFanStatusEntry 2 }
fsSystemFanStatusIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a fan."
::= { fsSystemFanStatusEntry 3 }
fsSystemFanStatus OBJECT-TYPE
SYNTAX INTEGER {
noexist (1), --no exist
existnopower (2), --exist no power
existreadypower (3), --exist ready power
normal (4), --normal
powerbutabnormal (5), --power but abnormal
unknow (6) --unknow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays whether an fan is normal or not."
::= { fsSystemFanStatusEntry 4 }
fsSystemFanStatusLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the level of the fan speed. If the device is no support this information,
This object will return 0."
::= { fsSystemFanStatusEntry 5 }
fsSystemFanStatusSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays fan speed(rpm). If the device is no support
this information, This object will return nothing information."
::= { fsSystemFanStatusEntry 6 }
fsSystemMultipleTemperatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemMultipleTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of multiple temperature entries. Each object displays
the multiple temperature information."
::= { fsSystemMIBObjects 44 }
fsSystemMultipleTemperatureEntry OBJECT-TYPE
SYNTAX FSSystemMultipleTemperatureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the multiple temperature information."
INDEX { fsSystemMultipleTemperatureDeviceIndex,
fsSystemMultipleTemperatureSlotIndex,
fsSystemMultipleTemperatureIndex }
::= { fsSystemMultipleTemperatureTable 1 }
FSSystemMultipleTemperatureEntry ::=
SEQUENCE {
fsSystemMultipleTemperatureDeviceIndex Integer32,
fsSystemMultipleTemperatureSlotIndex Integer32,
fsSystemMultipleTemperatureIndex Integer32,
fsSystemMultipleTemperatureName DisplayString,
fsSystemMultipleTemperatureCurrent Integer32,
fsSystemMultipleTemperatureWarning Integer32,
fsSystemMultipleTemperatureCritical Integer32
}
fsSystemMultipleTemperatureDeviceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device."
::= { fsSystemMultipleTemperatureEntry 1 }
fsSystemMultipleTemperatureSlotIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a slot device."
::= { fsSystemMultipleTemperatureEntry 2 }
fsSystemMultipleTemperatureIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents a device's multiple temperature information."
::= { fsSystemMultipleTemperatureEntry 3 }
fsSystemMultipleTemperatureName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual name assigned to a multiple temperature chip"
::= { fsSystemMultipleTemperatureEntry 4 }
fsSystemMultipleTemperatureCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the current multiple temperature of the FastSwitch.The temperature display
is not supported for the current temperature returns to -255."
::= { fsSystemMultipleTemperatureEntry 5 }
fsSystemMultipleTemperatureWarning OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Return the warning multiple temperature of the FastSwitch.The temperature display
is not supported for the warning temperature returns to -255."
::= { fsSystemMultipleTemperatureEntry 6 }
fsSystemMultipleTemperatureCritical OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Return the critical multiple temperature of the FastSwitch.The temperature display
is not supported for the critical temperature returns to -255."
::= { fsSystemMultipleTemperatureEntry 7 }
fsSystemAccurateUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the accurate system Uptime of equipment,unit is ticks."
::={ fsSystemMIBObjects 45 }
fsSystemPowerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of power"
::= { fsSystemMIBObjects 46 }
fsSystemSwitchID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch id in VSU"
::= { fsSystemMIBObjects 47 }
fsSystemApDeviceDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemApDeviceDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of lank ap system entries. Each object displays
the lank ap system information."
::= { fsSystemMIBObjects 48 }
fsSystemApDeviceDescriptionEntry OBJECT-TYPE
SYNTAX FSSystemApDeviceDescriptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the ap Device Description."
INDEX { fsSystemApDescMacAddr }
::= { fsSystemApDeviceDescriptionTable 1 }
FSSystemApDeviceDescriptionEntry ::=
SEQUENCE {
fsSystemApDescMacAddr MacAddress,
fsSystemApMemoryType INTEGER,
fsSystemApMemorySize Gauge,
fsSystemAPFlashType INTEGER,
fsSystemAPFlashSize Gauge,
fsSystemApNVRAMSize Gauge,
fsSystemApCFSize Gauge,
fsSystemApCPUType DisplayString
}
fsSystemApDescMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents ap system information."
::= { fsSystemApDeviceDescriptionEntry 1 }
fsSystemApMemoryType OBJECT-TYPE
SYNTAX INTEGER {
reserved(0),
sdram(1),
ddram(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the memory type of the lank ap system."
::= { fsSystemApDeviceDescriptionEntry 2 }
fsSystemApMemorySize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the memory card storage of the lank ap system, unit is MB."
::= { fsSystemApDeviceDescriptionEntry 3 }
fsSystemAPFlashType OBJECT-TYPE
SYNTAX INTEGER {
reserved(0),
nor(1),
non-nor(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents ap system information."
::= { fsSystemApDeviceDescriptionEntry 4 }
fsSystemAPFlashSize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the flash size of the lank ap system, unit is MB."
::= { fsSystemApDeviceDescriptionEntry 5 }
fsSystemApNVRAMSize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the NVRAM size of the lank ap system, unit is MB."
::= { fsSystemApDeviceDescriptionEntry 6 }
fsSystemApCFSize OBJECT-TYPE
SYNTAX Gauge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the CF size of the lank ap system, unit is MB."
::= { fsSystemApDeviceDescriptionEntry 7 }
fsSystemApCPUType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the cpu type of the lank ap system."
::= { fsSystemApDeviceDescriptionEntry 8 }
fsSystemApDeviceStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemApDeviceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of lank ap system entries. Each object displays
the lank ap system information."
::= { fsSystemMIBObjects 49 }
fsSystemApDeviceStatisticsEntry OBJECT-TYPE
SYNTAX FSSystemApDeviceStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays the ap Device Statistics."
INDEX { fsSystemApStatMacAddr }
::= { fsSystemApDeviceStatisticsTable 1 }
FSSystemApDeviceStatisticsEntry ::=
SEQUENCE {
fsSystemApStatMacAddr MacAddress,
fsSystemApInterfaceNum Integer32,
fsSystemApUptime TimeTicks,
fsSystemApCPUUtilizationCurrent Percent,
fsSystemApCPUUtilizationAverage Percent,
fsSystemApMemoryPoolCurrentUtilization Percent,
fsSystemApMemoryPoolAverageUtilization Percent,
fsSystemApFlashFreeSize Unsigned32,
fsSystemAPDeviceTemperature Integer32
}
fsSystemApStatMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely represents ap system information."
::= { fsSystemApDeviceStatisticsEntry 1 }
fsSystemApInterfaceNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the interface number of the lank ap system."
::= { fsSystemApDeviceStatisticsEntry 2 }
fsSystemApUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SysUptime of lank ap equipment, unit is ticks."
::= { fsSystemApDeviceStatisticsEntry 3 }
fsSystemApCPUUtilizationCurrent OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the collection of current lank ap cpu using rate."
::= { fsSystemApDeviceStatisticsEntry 4 }
fsSystemApCPUUtilizationAverage OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the average cpu using rate currently."
::= { fsSystemApDeviceStatisticsEntry 5 }
fsSystemApMemoryPoolCurrentUtilization OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the memory pool utilization currently."
::= { fsSystemApDeviceStatisticsEntry 6 }
fsSystemApMemoryPoolAverageUtilization OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the average memory pool utilization currently."
::= { fsSystemApDeviceStatisticsEntry 7 }
fsSystemApFlashFreeSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the free size of the flash device, unit is MB."
::= { fsSystemApDeviceStatisticsEntry 8 }
fsSystemAPDeviceTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the temperature of the ap.But the ap is no support
this information, so it will return 35 in perpetuity"
::= { fsSystemApDeviceStatisticsEntry 9 }
fsSystemUptimeMsLow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the equipment SysUptime Low 32-bit,unit is tick."
::={ fsSystemMIBObjects 50 }
fsSystemUptimeMsHigh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the equipment SysUptime High 32-bit,unit is tick."
::={ fsSystemMIBObjects 51 }
fsSystemFanSNTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemFanSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fan's serial number"
::= { fsSystemMIBObjects 52 }
fsSystemFanSNEntry OBJECT-TYPE
SYNTAX FSSystemFanSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays fan SN."
INDEX { fsSystemFanPadIndex }
::= { fsSystemFanSNTable 1 }
FSSystemFanSNEntry ::=
SEQUENCE {
fsSystemFanPadIndex Integer32,
fsSystemFanPadName DisplayString,
fsSystemFanPadSN DisplayString
}
fsSystemFanPadIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the index of the fan pad."
::= { fsSystemFanSNEntry 1 }
fsSystemFanPadName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the name of the fan pad."
::= { fsSystemFanSNEntry 2 }
fsSystemFanPadSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SN of the fan pad."
::= { fsSystemFanSNEntry 3 }
fsSystemDsfSNTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemDsfSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of dsf's serial number"
::= { fsSystemMIBObjects 53 }
fsSystemDsfSNEntry OBJECT-TYPE
SYNTAX FSSystemDsfSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays dsf SN."
INDEX { fsSystemDsfIndex }
::= { fsSystemDsfSNTable 1 }
FSSystemDsfSNEntry ::=
SEQUENCE {
fsSystemDsfIndex Integer32,
fsSystemDsfName DisplayString,
fsSystemDsfSN DisplayString
}
fsSystemDsfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the index of the dsf."
::= { fsSystemDsfSNEntry 1 }
fsSystemDsfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the name of the dsf."
::= { fsSystemDsfSNEntry 2 }
fsSystemDsfSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SN of the dsf."
::= { fsSystemDsfSNEntry 3 }
fsSystemPowerSNTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemPowerSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of power's serial number"
::= { fsSystemMIBObjects 54 }
fsSystemPowerSNEntry OBJECT-TYPE
SYNTAX FSSystemPowerSNEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays power SN."
INDEX { fsSystemPowerSNIndex }
::= { fsSystemPowerSNTable 1 }
FSSystemPowerSNEntry ::=
SEQUENCE {
fsSystemPowerSNIndex Integer32,
fsSystemPowerSNName DisplayString,
fsSystemPowerSN DisplayString
}
fsSystemPowerSNIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the index of the power."
::= { fsSystemPowerSNEntry 1 }
fsSystemPowerSNName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the name of the power."
::= { fsSystemPowerSNEntry 2 }
fsSystemPowerSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the SN of the power."
::= { fsSystemPowerSNEntry 3 }
fsSystemFanPad1SpeedTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemFanPad1SpeedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fan's speed on fan pad1."
::= { fsSystemMIBObjects 55 }
fsSystemFanPad1SpeedEntry OBJECT-TYPE
SYNTAX FSSystemFanPad1SpeedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays fan's speed on same fan pad"
INDEX { fsSystemOamFanPad1Index }
::= { fsSystemFanPad1SpeedTable 1 }
FSSystemFanPad1SpeedEntry ::=
SEQUENCE {
fsSystemOamFanPad1Index Integer32,
fsSystemOamFanPad1Name DisplayString,
fsSystemFanPad1Speed1 Integer32,
fsSystemFanPad1Speed2 Integer32,
fsSystemFanPad1Speed3 Integer32,
fsSystemFanPad1Speed4 Integer32,
fsSystemFanPad1Speed5 Integer32,
fsSystemFanPad1Speed6 Integer32,
fsSystemFanPad1Speed7 Integer32,
fsSystemFanPad1Speed8 Integer32,
fsSystemFanPad1Speed9 Integer32
}
fsSystemOamFanPad1Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the index of the fan pad."
::= { fsSystemFanPad1SpeedEntry 1 }
fsSystemOamFanPad1Name OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the name of the fan pad."
::= { fsSystemFanPad1SpeedEntry 2 }
fsSystemFanPad1Speed1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan1."
::= { fsSystemFanPad1SpeedEntry 3 }
fsSystemFanPad1Speed2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan2."
::= { fsSystemFanPad1SpeedEntry 4 }
fsSystemFanPad1Speed3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan3."
::= { fsSystemFanPad1SpeedEntry 5 }
fsSystemFanPad1Speed4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan4."
::= { fsSystemFanPad1SpeedEntry 6 }
fsSystemFanPad1Speed5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan5."
::= { fsSystemFanPad1SpeedEntry 7 }
fsSystemFanPad1Speed6 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan6."
::= { fsSystemFanPad1SpeedEntry 8 }
fsSystemFanPad1Speed7 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan7."
::= { fsSystemFanPad1SpeedEntry 9 }
fsSystemFanPad1Speed8 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan8."
::= { fsSystemFanPad1SpeedEntry 10 }
fsSystemFanPad1Speed9 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan9."
::= { fsSystemFanPad1SpeedEntry 11 }
fsSystemFanPad2SpeedTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemFanPad2SpeedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fan's speed on fan pad2."
::= { fsSystemMIBObjects 56 }
fsSystemFanPad2SpeedEntry OBJECT-TYPE
SYNTAX FSSystemFanPad2SpeedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays fan's speed on same fan pad2"
INDEX { fsSystemOamFanPad2Index }
::= { fsSystemFanPad2SpeedTable 1 }
FSSystemFanPad2SpeedEntry ::=
SEQUENCE {
fsSystemOamFanPad2Index Integer32,
fsSystemOamFanPad2Name DisplayString,
fsSystemFanPad2Speed1 Integer32,
fsSystemFanPad2Speed2 Integer32,
fsSystemFanPad2Speed3 Integer32
}
fsSystemOamFanPad2Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the index of the fan pad2."
::= { fsSystemFanPad2SpeedEntry 1 }
fsSystemOamFanPad2Name OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the name of the fan pad."
::= { fsSystemFanPad2SpeedEntry 2 }
fsSystemFanPad2Speed1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan1."
::= { fsSystemFanPad2SpeedEntry 3 }
fsSystemFanPad2Speed2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan2."
::= { fsSystemFanPad2SpeedEntry 4 }
fsSystemFanPad2Speed3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan3."
::= { fsSystemFanPad2SpeedEntry 5 }
fsSystemFanPad3SpeedTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSSystemFanPad3SpeedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of fan's speed on fan pad3."
::= { fsSystemMIBObjects 57 }
fsSystemFanPad3SpeedEntry OBJECT-TYPE
SYNTAX FSSystemFanPad3SpeedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry displays fan's speed on same fan pad3"
INDEX { fsSystemOamFanPad3Index }
::= { fsSystemFanPad3SpeedTable 1 }
FSSystemFanPad3SpeedEntry ::=
SEQUENCE {
fsSystemOamFanPad3Index Integer32,
fsSystemOamFanPad3Name DisplayString,
fsSystemFanPad3Speed1 Integer32,
fsSystemFanPad3Speed2 Integer32,
fsSystemFanPad3Speed3 Integer32,
fsSystemFanPad3Speed4 Integer32,
fsSystemFanPad3Speed5 Integer32
}
fsSystemOamFanPad3Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the index of the fan pad3."
::= { fsSystemFanPad3SpeedEntry 1 }
fsSystemOamFanPad3Name OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the name of the fan pad."
::= { fsSystemFanPad3SpeedEntry 2 }
fsSystemFanPad3Speed1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan1."
::= { fsSystemFanPad3SpeedEntry 3 }
fsSystemFanPad3Speed2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan2."
::= { fsSystemFanPad3SpeedEntry 4 }
fsSystemFanPad3Speed3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan3."
::= { fsSystemFanPad3SpeedEntry 5 }
fsSystemFanPad3Speed4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan4."
::= { fsSystemFanPad3SpeedEntry 6 }
fsSystemFanPad3Speed5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Return the speed of the fan5."
::= { fsSystemFanPad3SpeedEntry 7 }
fsSystemParamSaveErrIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Param Save Err Idx."
::= { fsSystemMIBObjects 58 }
fsSystemParamSaveErrMsg OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Param Save Err Msg."
::= { fsSystemMIBObjects 59 }
fsSystemMIBTraps OBJECT IDENTIFIER ::= { fsSystemMIB 2 }
fsSystemHardChangeDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The description of hard change"
::= { fsSystemMIBTraps 1 }
fsSystemHardChangeDetected NOTIFICATION-TYPE
OBJECTS {fsSystemHardChangeDesc}
STATUS current
DESCRIPTION
"System hardware has changed include number of devices or number of modules
or the place or type of the module is change."
::= { fsSystemMIBTraps 2 }
fsSystemPowerStateChange NOTIFICATION-TYPE
OBJECTS {fsSystemHwPower}
STATUS current
DESCRIPTION
"while the state of power changed, then this trap will be sent."
::= { fsSystemMIBTraps 3 }
fsSystemFanStateChange NOTIFICATION-TYPE
OBJECTS {fsSystemHwFan}
STATUS current
DESCRIPTION
"while the state of fan changed, then this trap will be sent."
::= { fsSystemMIBTraps 4 }
--2010-05
fsSystemCPUusageTooHighTrap NOTIFICATION-TYPE
OBJECTS {fsCPUUtilization1Min}
STATUS current
DESCRIPTION
"CPU usage Too High warning."
::= { fsSystemMIBTraps 5 }
--2010-05
fsSystemCPUusageTooHighRecovTrap NOTIFICATION-TYPE
OBJECTS {fsCPUUtilization1Min}
STATUS current
DESCRIPTION
"clear the warning of CPU usage too high and report the current CPU usage."
::= { fsSystemMIBTraps 6 }
--2010-05
fsSystemTmpTooHighTrap NOTIFICATION-TYPE
OBJECTS {fsSystemTemperatureCurrent}
STATUS current
DESCRIPTION
"Temperature Too High warning."
::= { fsSystemMIBTraps 7 }
--Temperature Too High Recover Trap 2010-05
fsSystemTmpTooHighRecovTrap NOTIFICATION-TYPE
OBJECTS {fsSystemTemperatureCurrent}
STATUS current
DESCRIPTION
"clear the warning of temperature too high and report the current temperature."
::= { fsSystemMIBTraps 8 }
--Memory usage too high trap 2010-05
fsSystemMemusageTooHighTrap NOTIFICATION-TYPE
OBJECTS {fsMemoryPoolCurrentUtilization}
STATUS current
DESCRIPTION
"Memory usage too high warning."
::= { fsSystemMIBTraps 9 }
--Memory usage too high recover trap 2010-05
fsSystemMemusageTooHighRecovTrap NOTIFICATION-TYPE
OBJECTS {fsMemoryPoolCurrentUtilization}
STATUS current
DESCRIPTION
"clear the warning of Memory usage too high and report the current Memory usage."
::= { fsSystemMIBTraps 10 }
--lank ap 2010-7
fsSystemLankApCPUusageTooHighTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
fsCPUUtilization1Min
}
STATUS current
DESCRIPTION
"lank ap CPU usage Too High warning."
::= { fsSystemMIBTraps 11 }
--lank ap 2010-7
fsSystemLankApCPUusageTooHighRecovTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
fsCPUUtilization1Min
}
STATUS current
DESCRIPTION
"clear the warning of lank ap CPU usage too high and report the current CPU usage."
::= { fsSystemMIBTraps 12 }
--lank ap 2010-7
fsSystemLankApMemusageTooHighTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
fsMemoryPoolCurrentUtilization
}
STATUS current
DESCRIPTION
"lank ap Memory usage too high warning."
::= { fsSystemMIBTraps 13 }
--lank ap 2010-7
fsSystemLankApMemusageTooHighRecovTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
fsMemoryPoolCurrentUtilization
}
STATUS current
DESCRIPTION
"clear the warning of lank ap Memory usage too high and report the current Memory usage."
::= { fsSystemMIBTraps 14 }
--System reset trap 2010-7
fsSystemResetTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"send a trap while system reset"
::= { fsSystemMIBTraps 15 }
--lank ap reset trap 2010-8
fsSystemLankApResetTrap NOTIFICATION-TYPE
OBJECTS {fsApMacAddr}
STATUS current
DESCRIPTION
"send a trap while lank ap system reset"
::= { fsSystemMIBTraps 16 }
fsSystemPowerOnTrap NOTIFICATION-TYPE
OBJECTS {fsSystemPowerIndex}
STATUS current
DESCRIPTION
"send a trap while power on."
::= { fsSystemMIBTraps 17 }
fsSystemPowerOffTrap NOTIFICATION-TYPE
OBJECTS {fsSystemPowerIndex}
STATUS current
DESCRIPTION
"send a trap while power off."
::= { fsSystemMIBTraps 18 }
fsSystemPowerOnTrapInVSU NOTIFICATION-TYPE
OBJECTS {
fsSystemSwitchID,
fsSystemPowerIndex
}
STATUS current
DESCRIPTION
"send a trap while power on in VSU."
::= { fsSystemMIBTraps 19 }
fsSystemPowerOffTrapInVSU NOTIFICATION-TYPE
OBJECTS {
fsSystemSwitchID,
fsSystemPowerIndex
}
STATUS current
DESCRIPTION
"send a trap while power off in VSU."
::= { fsSystemMIBTraps 20 }
fsSystemTmpTableTooHighTrap NOTIFICATION-TYPE
OBJECTS {
fsSystemMultipleTemperatureSlotIndex
}
STATUS current
DESCRIPTION
"Temperature Too High warning with the slot index."
::= { fsSystemMIBTraps 21 }
fsSystemTmpTableTooHighRecovTrap NOTIFICATION-TYPE
OBJECTS {
fsSystemMultipleTemperatureSlotIndex
}
STATUS current
DESCRIPTION
"clear the warning of Temperature too high with the slot index."
::= { fsSystemMIBTraps 22 }
fsSystemTmpTableTooHighTrapVSU NOTIFICATION-TYPE
OBJECTS {
fsSystemMultipleTemperatureDeviceIndex,
fsSystemMultipleTemperatureSlotIndex
}
STATUS current
DESCRIPTION
"Temperature Too High warning with the slot index in VSU."
::= { fsSystemMIBTraps 23 }
fsSystemTmpTableTooHighRecovTrapVSU NOTIFICATION-TYPE
OBJECTS {
fsSystemMultipleTemperatureDeviceIndex,
fsSystemMultipleTemperatureSlotIndex
}
STATUS current
DESCRIPTION
"clear the warning of Temperature too high with the slot index."
::= { fsSystemMIBTraps 24 }
fsSystemFanTableStateChange NOTIFICATION-TYPE
OBJECTS {
fsSystemFanStatusFanIndex,
fsSystemFanStatusIndex,
fsSystemFanStatus
}
STATUS current
DESCRIPTION
"while the state of fan changed, then this trap will be sent."
::= { fsSystemMIBTraps 25 }
fsSystemFanTableStateChangeVSU NOTIFICATION-TYPE
OBJECTS {
fsSystemFanStatusDeviceIndex,
fsSystemFanStatusFanIndex,
fsSystemFanStatusIndex,
fsSystemFanStatus
}
STATUS current
DESCRIPTION
"In VSU, while the state of fan changed, then this trap will be sent."
::= { fsSystemMIBTraps 26 }
fsSystemParamSaveErr NOTIFICATION-TYPE
OBJECTS {
fsSystemParamSaveErrIdx,
fsSystemParamSaveErrMsg
}
STATUS current
DESCRIPTION
"while call exec write, then this trap will be sent."
::= { fsSystemMIBTraps 27 }
fsSystemFanTableOn NOTIFICATION-TYPE
OBJECTS {
fsSystemFanStatusFanIndex,
fsSystemFanStatusIndex,
fsSystemFanStatus
}
STATUS current
DESCRIPTION
"while fan is turned on, then this trap will be sent."
::= { fsSystemMIBTraps 28 }
fsSystemFanTableOff NOTIFICATION-TYPE
OBJECTS {
fsSystemFanStatusFanIndex,
fsSystemFanStatusIndex,
fsSystemFanStatus
}
STATUS current
DESCRIPTION
"while fan is turned off, then this trap will be sent."
::= { fsSystemMIBTraps 29 }
fsSystemFanTableOnVSU NOTIFICATION-TYPE
OBJECTS {
fsSystemFanStatusDeviceIndex,
fsSystemFanStatusFanIndex,
fsSystemFanStatusIndex,
fsSystemFanStatus
}
STATUS current
DESCRIPTION
"In VSU, while fan is turned on, then this trap will be sent."
::= { fsSystemMIBTraps 30 }
fsSystemFanTableOffVSU NOTIFICATION-TYPE
OBJECTS {
fsSystemFanStatusDeviceIndex,
fsSystemFanStatusFanIndex,
fsSystemFanStatusIndex,
fsSystemFanStatus
}
STATUS current
DESCRIPTION
"In VSU, while fan is turned off, then this trap will be sent."
::= { fsSystemMIBTraps 31 }
fsSystemMIBConformance OBJECT IDENTIFIER ::= { fsSystemMIB 3 }
fsSystemMIBCompliances OBJECT IDENTIFIER ::= { fsSystemMIBConformance 1 }
fsSystemMIBGroups OBJECT IDENTIFIER ::= { fsSystemMIBConformance 2 }
-- compliance statements
fsSystemMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the FS System MIB"
MODULE -- this module
MANDATORY-GROUPS { fsSystemMIBGroup
}
::= { fsSystemMIBCompliances 1 }
-- units of conformance
fsSystemMIBGroup OBJECT-GROUP
OBJECTS {
fsSystemHwVersion,
fsSystemSwVersion,
fsSystemBootVersion,
fsSystemSysCtrlVersion,
fsSystemParametersSave,
fsSystemReset,
fsSystemOutBandRate,
fsSwitchLayer
}
STATUS current
DESCRIPTION
"A collection of objects providing system information and
opertion to a FS agent."
::= { fsSystemMIBGroups 1 }
END