mibs/fs/GBNDeviceStack-MIB
GBNDeviceStack-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, IpAddress,
NOTIFICATION-TYPE FROM SNMPv2-SMI
DisplayString, MacAddress,
RowStatus, TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
gbnDevice FROM ADMIN-MASTER-MIB
;
gbnDeviceStackMib MODULE-IDENTITY
LAST-UPDATED "201307090000Z" -- July 09, 2013
ORGANIZATION "ADMIN"
CONTACT-INFO "ADMIN
E-mail: support@admin.com"
DESCRIPTION "gbn stack Enterprise MIB definition."
REVISION "201307090000Z" -- July 09, 2013
DESCRIPTION "Initial MIB creation."
::= { gbnDevice 5 }
------------------------------------------------------------------------------
-- Textual Conventions (i.e., these do not affect object encoding):
------------------------------------------------------------------------------
--
-- "DURABLE":
-- Objects that are saved across a system reset and/or power cycle
-- are noted as "DURABLE" for convenience in the DESCRIPTION
-- section of the object definition. Code must be explicitly
-- written to implement these DURABLE objects.
--
------------------------------------------------------------------------------
-- define groups in gbn-stack-MIB
stackEnableRunning OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"stack mode running status."
::= { gbnDeviceStackMib 1 }
stackEnableConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"trigger to enable or disable stack mode, need to reboot to take effect."
::= { gbnDeviceStackMib 2 }
stackUnitMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"max unit members support in stack mode."
::= { gbnDeviceStackMib 3 }
stackPortVirtualLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF StackPortVirtualLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of virtual link."
REFERENCE
"9.6.1"
::= { gbnDeviceStackMib 4 }
stackPortVirtualLinkEntry OBJECT-TYPE
SYNTAX StackPortVirtualLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"virtuallink is a virtual link, it includes none or some real physical ports.System have two virtuallink:virtuallink 1 and virtualink 2."
INDEX { stackPortVirtualLinkPhyPort }
::= { stackPortVirtualLinkTable 1 }
StackPortVirtualLinkEntry ::=
SEQUENCE {
stackPortVirtualLinkDevice
Integer32,
stackPortVirtualLinkSlot
Integer32,
stackPortVirtualLinkPortNum
Integer32,
stackPortVirtualLinkPhyPort
Integer32,
stackPortVirtualLinkModeRunning
INTEGER,
stackPortVirtualLinkModeConfig
INTEGER,
stackPortVirtualLinkLinkStatus
INTEGER,
stackPortVirtualLinkLinkSpeed
INTEGER,
}
stackPortVirtualLinkPhyPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port number of switch."
::= { stackPortVirtualLinkEntry 1 }
stackPortVirtualLinkDevice OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"device in <device/slot/portnum>."
::= { stackPortVirtualLinkEntry 2 }
stackPortVirtualLinkSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"slot in <device/slot/portnum>."
::= { stackPortVirtualLinkEntry 3 }
stackPortVirtualLinkPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"portnum in <device/slot/portnum>."
::= { stackPortVirtualLinkEntry 4 }
stackPortVirtualLinkModeRunning OBJECT-TYPE
SYNTAX INTEGER {
none(0),
virtuallink1(1),
virtuallink2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"running status."
::= { stackPortVirtualLinkEntry 5 }
stackPortVirtualLinkModeConfig OBJECT-TYPE
SYNTAX INTEGER {
none(0),
virtuallink1(1),
virtuallink2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"trigger to change virtuallink mode of phyical port, need to reboot to tabke effect."
::= { stackPortVirtualLinkEntry 6 }
stackPortVirtualLinkLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
linkdown(0),
linkup(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"link status of this phyical port."
::= { stackPortVirtualLinkEntry 7 }
stackPortVirtualLinkLinkSpeed OBJECT-TYPE
SYNTAX INTEGER {
s10g(0),
s12g(1),
s1g(2),
s2-5g(3),
s5g(4),
s10m(5),
s100m(6),
unknow(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"link speed of this phyical port."
::= { stackPortVirtualLinkEntry 8 }
stackMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF StackMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of stack members."
REFERENCE
"9.6.1"
::= { gbnDeviceStackMib 5 }
stackMemberEntry OBJECT-TYPE
SYNTAX StackMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"members of stack system, when stack is not running, only unit 0 can use."
INDEX { stackMemberUnit }
::= { stackMemberTable 1 }
StackMemberEntry ::=
SEQUENCE {
stackMemberUnit
Integer32,
stackMemberMode
INTEGER,
stackMemberNewUnit
Integer32,
stackMemberPriorityRunning
Integer32,
stackMemberPriorityConfig
Integer32,
stackMemberReboot
TruthValue,
stackMemberVirtualLink1Hop
Integer32,
stackMemberVirtualLink2Hop
Integer32,
stackMemberMac
MacAddress,
}
stackMemberUnit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"unit number, range is form 0 to (stackUnitMax - 1)."
::= { stackMemberEntry 1 }
stackMemberMode OBJECT-TYPE
SYNTAX INTEGER {
slave(0),
master(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"member unit is master or slave."
::= { stackMemberEntry 2 }
stackMemberNewUnit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"trigger to change unit number, range is form 0 to (stackUnitMax - 1).need to reboot to tabke effect"
::= { stackMemberEntry 3 }
stackMemberPriorityRunning OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"running priorty of this unit.default is 0"
::= { stackMemberEntry 4 }
stackMemberPriorityConfig OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"trigger to change priortiy of this unit, need to reboot to tabke effect.default is 0.need to reboot to tabke effect"
::= { stackMemberEntry 5 }
stackMemberReboot OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"trigger to reboot this unit."
::= { stackMemberEntry 6 }
stackMemberVirtualLink1Hop OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"how many hops can master unit reach this unit from virtuallink 1.range is from 0 to stackUnitMax, and stackUnitMax means infinite."
::= { stackMemberEntry 7 }
stackMemberVirtualLink2Hop OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"how many hops can master unit reach this unit from virtuallink 2.range is from 0 to stackUnitMax, and stackUnitMax means infinite."
::= { stackMemberEntry 8 }
stackMemberMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"mac address of this unit."
::= { stackMemberEntry 9 }
stackLinkdownDelay OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable linkdown-delay function.default is disable.this mib can be accessed only when stackEnableRunning is true."
::= { gbnDeviceStackMib 6 }
stackHelloTimeOut OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable linkdown-delay function.default is disable.default is 30 seconds.this mib can be accessed only when stackEnableRunning is true."
::= { gbnDeviceStackMib 7 }
stackLacpMadDomain OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"lacp mad domain id.default is 0.this mib can be accessed only when stackEnableRunning is true."
::= { gbnDeviceStackMib 8 }
stackLacpMadTable OBJECT-TYPE
SYNTAX SEQUENCE OF StackLacpMadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of lacp mad.this mib can be accessed only when stackEnableRunning is true."
REFERENCE
"9.6.1"
::= { gbnDeviceStackMib 9 }
stackLacpMadEntry OBJECT-TYPE
SYNTAX StackLacpMadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of lacp mad."
INDEX { lacpMadChannelGroup }
::= { stackLacpMadTable 1 }
StackLacpMadEntry ::=
SEQUENCE {
lacpMadChannelGroup
Integer32,
lacpMadEnable
TruthValue,
}
lacpMadChannelGroup OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"lacp channel group number."
::= { stackLacpMadEntry 1 }
lacpMadEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable lacp mad function.default is disable."
::= { stackLacpMadEntry 2 }
stackMadExcludeTable OBJECT-TYPE
SYNTAX SEQUENCE OF StackMadExcludeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of mad exclude of port.this mib can be accessed only when stackEnableRunning is true."
REFERENCE
"9.6.1"
::= { gbnDeviceStackMib 10 }
stackMadExcludeEntry OBJECT-TYPE
SYNTAX StackMadExcludeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of mad exclude of port."
INDEX { madExcludePort }
::= { stackMadExcludeTable 1 }
StackMadExcludeEntry ::=
SEQUENCE {
madExcludePort
Integer32,
macExcludeEnable
TruthValue,
}
madExcludePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port number of system."
::= { stackMadExcludeEntry 1 }
macExcludeEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enable or disable mad exclude function.default is disable."
::= { stackMadExcludeEntry 2 }
----------------------------------------------------------------------------------
--stack TRAP MIB--
----------------------------------------------------------------------------------
stackTrap OBJECT IDENTIFIER ::= { gbnDeviceStackMib 11 }
stackPortVirtualLinkStateChange NOTIFICATION-TYPE
OBJECTS { stackPortVirtualLinkDevice, stackPortVirtualLinkSlot,
stackPortVirtualLinkPortNum, stackPortVirtualLinkLinkStatus }
STATUS current
DESCRIPTION
"A link state change trap signifies that the SNMP entity,
acting in an agent role, has detected that the
stackPortVirtualLinkLinkStatus object for one of its communication
links is about to enter the down or up state from some other state."
::= { stackTrap 1 }
--
-- END of gbn-stack-MIB
--
END