mibs/fs/GBNServiceMACAUTHEN-MIB
GBNServiceMACAUTHEN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, IpAddress,
NOTIFICATION-TYPE FROM SNMPv2-SMI
DisplayString, MacAddress,
RowStatus, TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
gbnServiceAAA FROM ADMIN-MASTER-MIB
;
gbnMacAuthenMib MODULE-IDENTITY
LAST-UPDATED "201006010000Z" -- Jun 01, 2010
ORGANIZATION "Admin"
CONTACT-INFO "Admin
E-mail: support@Admin.com"
DESCRIPTION "gbn macauthen Enterprise MIB definition."
REVISION "201006010000Z" -- Jun 01, 2010
DESCRIPTION "Initial MIB creation."
::= { gbnServiceAAA 4 }
------------------------------------------------------------------------------
-- Textual Conventions (i.e., these do not affect object encoding):
------------------------------------------------------------------------------
--
-- "DURABLE":
-- Objects that are saved across a system reset and/or power cycle
-- are noted as "DURABLE" for convenience in the DESCRIPTION
-- section of the object definition. Code must be explicitly
-- written to implement these DURABLE objects.
--
------------------------------------------------------------------------------
-- define groups in gbn-TACACS-MIB
globalEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"global config of mac-authentication.default is false."
::= { gbnMacAuthenMib 1 }
radiusDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..24))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"domain name of radius domain.use size 0 to delete.default is size 0,indicating none."
::= { gbnMacAuthenMib 2 }
offlineTimer OBJECT-TYPE
SYNTAX Integer32 (30..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"offline time of mac.unit is second.default is 300 seconds."
::= { gbnMacAuthenMib 3 }
quietTimer OBJECT-TYPE
SYNTAX Integer32 (30..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"quiet time of mac.unit is second.default is 60 secondsl"
::= { gbnMacAuthenMib 4 }
userMode OBJECT-TYPE
SYNTAX INTEGER {
fixed(1), -- use fixed name and password
macaddress(0) -- use mac-address
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"how to make username and password of radius.default is macaddress(0)."
::= { gbnMacAuthenMib 5 }
userName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"username when usermode is fiexed.use size 0 to delete.default is size 0,indicating none."
::= { gbnMacAuthenMib 6 }
password OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"password when usermode is fiexed.use size 0 to delete.default is size 0,indicating none."
::= { gbnMacAuthenMib 7 }
macAuthenPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacAuthenPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of information of ports."
REFERENCE
"9.6.1"
::= { gbnMacAuthenMib 8 }
macAuthenPortEntry OBJECT-TYPE
SYNTAX MacAuthenPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of information of ports."
INDEX { macAuthenPortNumber }
::= { macAuthenPortTable 1 }
MacAuthenPortEntry ::=
SEQUENCE {
macAuthenPortNumber
Unsigned32,
macAuthenEnable
TruthValue,
guestVlan
Integer32,
maxUsers
Integer32,
rateLimit
Integer32,
rateLimitTimer
Integer32,
uplink
TruthValue
}
macAuthenPortNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port number associated with this Port."
REFERENCE
"9.6.1, Port number"
::= { macAuthenPortEntry 1 }
macAuthenEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable mac-authentication of this Port.default is disabled."
REFERENCE
"9.6.1, Protocol version"
::= { macAuthenPortEntry 2 }
guestVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"guest vlan.0 is disable.default is 0."
::= { macAuthenPortEntry 3 }
maxUsers OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"maximum users.range is from 1 to 256.default is 256."
::= { macAuthenPortEntry 4 }
rateLimit OBJECT-TYPE
SYNTAX Integer32 (10..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"rate limit of authentition packets.when reach this value, the port can not authenticate users, is in block state.range is form 10 to 300.default is 300 packets per sencond"
::= { macAuthenPortEntry 5 }
rateLimitTimer OBJECT-TYPE
SYNTAX Integer32 (30..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"when port is in block state because ratelimit, after this timer ,port turns to normal state..default is 60"
::= { macAuthenPortEntry 6 }
uplink OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"uplink port of vlan"
::= { macAuthenPortEntry 7 }
encrptionMode OBJECT-TYPE
SYNTAX INTEGER {
chap(1), -- use chap
pap(0) -- use pap
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"radius password encrption mode,default is pap."
::= { gbnMacAuthenMib 9 }
macvlanEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"whethe to use mac vlan function.default is false."
::= { gbnMacAuthenMib 10 }
questVlanReauthTimer OBJECT-TYPE
SYNTAX Integer32 (30..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"guestvlan users reauthentication timer .unit is second.range is from 30 to 3600.default is 30 secondsl"
::= { gbnMacAuthenMib 11 }
macUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of information of users."
REFERENCE
"9.6.1"
::= { gbnMacAuthenMib 12 }
macUsersEntry OBJECT-TYPE
SYNTAX MacUsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of information of users."
INDEX { userMac }
::= { macUsersTable 1 }
MacUsersEntry ::=
SEQUENCE {
userMac
MacAddress,
userState
Unsigned32,
userPort
Unsigned32,
userVlan
Integer32,
userInGuestVlan
TruthValue,
userPriority
Integer32,
userAcl
DisplayString,
userRate
Integer32,
userPeakRate
Integer32,
userBasicRate
Integer32
}
userMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user macaddress."
::= { macUsersEntry 1 }
userState OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user state.bit 0:quiet state,bit 1:authenticating state,bit 2:authenticated state, bit 3:off-line detecting state"
::= { macUsersEntry 2 }
userPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the port number of this user belongs to.start form 1"
::= { macUsersEntry 3 }
userVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the vlan number of this user belongs to."
::= { macUsersEntry 4 }
userInGuestVlan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"whether user is in guest vlan."
::= { macUsersEntry 5 }
userPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the priority of this user belongs to."
::= { macUsersEntry 6 }
userAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the acl name of this user belongs to."
::= { macUsersEntry 7 }
userRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"average bandwith of this user.unit is kbps"
::= { macUsersEntry 8 }
userPeakRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"peak bandwith of this user.unit is kbps"
::= { macUsersEntry 9 }
userBasicRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"basic bandwith of this user.unit is kbps"
::= { macUsersEntry 10 }
--
-- END of gbn-MACAUTHEN-MIB
--
END