mibs/fs/SWITCH
-- Imports declare
SWITCH DEFINITIONS ::= BEGIN
IMPORTS
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ifIndex
FROM IF-MIB
TimeTicks, Counter32, OBJECT-IDENTITY,
mib-2, MODULE-IDENTITY, IpAddress, Counter64,
Unsigned32, Integer32, Gauge32, OBJECT-TYPE,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
OwnerString
FROM RMON-MIB
NOTIFICATION-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InetAddressPrefixLength, InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
InterfaceIndex, InterfaceIndexOrZero, ifIndex
FROM IF-MIB
VrId
FROM VRRP-MIB
TestAndIncr, TimeStamp, AutonomousType, DisplayString,
PhysAddress, TEXTUAL-CONVENTION, TruthValue, DateAndTime,
MacAddress, RowStatus
FROM SNMPv2-TC
enterprises
FROM SNMPv2-SMI;
-- Child OID declare
switch MODULE-IDENTITY
LAST-UPDATED "201006260000Z" -- June 26, 2008 at 00:00 GMT
ORGANIZATION
""
CONTACT-INFO
"
"
DESCRIPTION
"The System Information of the switch"
::= { enterprises 27975 }
------------------------------------------------------------------
-- Switch Identifiers --
------------------------------------------------------------------
system OBJECT IDENTIFIER ::= { switch 1 }
syslog OBJECT IDENTIFIER ::= { switch 2 }
mirror OBJECT IDENTIFIER ::= { switch 3 }
portSecurity OBJECT IDENTIFIER ::= { switch 4 }
stormControl OBJECT IDENTIFIER ::= { switch 5 }
ntp OBJECT IDENTIFIER ::= { switch 6 }
acl OBJECT IDENTIFIER ::= { switch 7 }
qos OBJECT IDENTIFIER ::= { switch 8 }
igsp OBJECT IDENTIFIER ::= { switch 9 }
linkAgg OBJECT IDENTIFIER ::= { switch 10 }
qBridgeExt OBJECT IDENTIFIER ::= { switch 11 }
dot1xExt OBJECT IDENTIFIER ::= { switch 12 }
timeRange OBJECT IDENTIFIER ::= { switch 13 }
stpExt OBJECT IDENTIFIER ::= { switch 14 }
igmpExt OBJECT IDENTIFIER ::= { switch 16 }
boardHealthyMonitor OBJECT IDENTIFIER ::= { switch 17 }
arpInsp OBJECT IDENTIFIER ::= { switch 20 }
pimsmExt OBJECT IDENTIFIER ::= { switch 21 }
ospfExt OBJECT IDENTIFIER ::= { switch 22 }
user OBJECT IDENTIFIER ::= { switch 30 }
snmpExt OBJECT IDENTIFIER ::= { switch 32 }
stm OBJECT IDENTIFIER ::= { switch 33 }
dnsClient OBJECT IDENTIFIER ::= { switch 34 }
ssh OBJECT IDENTIFIER ::= { switch 35 }
dhcp OBJECT IDENTIFIER ::= { switch 36 }
lswdevMMib OBJECT IDENTIFIER ::= { switch 37 }
lswTrapMib OBJECT IDENTIFIER ::= { switch 39 }
ipSourceGuard OBJECT IDENTIFIER ::= { switch 40 }
vrrpExt OBJECT IDENTIFIER ::= { switch 41 }
interface OBJECT IDENTIFIER ::= { switch 42 }
management OBJECT IDENTIFIER ::= { switch 43 }
mvr OBJECT IDENTIFIER ::= { switch 44 }
erps OBJECT IDENTIFIER ::= { switch 45 }
prefixList OBJECT IDENTIFIER ::= { switch 46 }
ipUnicast OBJECT IDENTIFIER ::= { switch 47 }
vrf OBJECT IDENTIFIER ::= { switch 48 }
aaa OBJECT IDENTIFIER ::= { switch 49 }
evc OBJECT IDENTIFIER ::= { switch 51 }
qinq OBJECT IDENTIFIER ::= { switch 52 }
rmonExt OBJECT IDENTIFIER ::= { switch 53 }
routeMap OBJECT IDENTIFIER ::= { switch 54 }
ripExt OBJECT IDENTIFIER ::= { switch 57 }
ldpExt OBJECT IDENTIFIER ::= { switch 60 }
bgp OBJECT IDENTIFIER ::= { switch 68 }
mpls OBJECT IDENTIFIER ::= { switch 69 }
smartlink OBJECT IDENTIFIER ::= { switch 70 }
flowctrl OBJECT IDENTIFIER ::= { switch 71 }
cputraffic OBJECT IDENTIFIER ::= { switch 72 }
portisolate OBJECT IDENTIFIER ::= { switch 73 }
phyloopback OBJECT IDENTIFIER ::= { switch 74 }
monitorlink OBJECT IDENTIFIER ::= { switch 75 }
udld OBJECT IDENTIFIER ::= { switch 76 }
policyBasedRouting OBJECT IDENTIFIER ::= { switch 77 }
ddos OBJECT IDENTIFIER ::= { switch 78 }
l2ping OBJECT IDENTIFIER ::= { switch 79 }
ipg OBJECT IDENTIFIER ::= { switch 80 }
syncE OBJECT IDENTIFIER ::= { switch 81 }
arpConfig OBJECT IDENTIFIER ::= { switch 82 }
cfm OBJECT IDENTIFIER ::= { switch 83 }
efm OBJECT IDENTIFIER ::= { switch 84 }
ptp OBJECT IDENTIFIER ::= { switch 85 }
pm OBJECT IDENTIFIER ::= { switch 90 }
alarm OBJECT IDENTIFIER ::= { switch 91 }
rsvpTe OBJECT IDENTIFIER ::= { switch 92 }
g8031 OBJECT IDENTIFIER ::= { switch 93 }
g8032 OBJECT IDENTIFIER ::= { switch 94 }
voiceVlan OBJECT IDENTIFIER ::= { switch 95 }
ivi OBJECT IDENTIFIER ::= { switch 96 }
product OBJECT IDENTIFIER ::= { switch 99 }
l2protocol OBJECT IDENTIFIER ::= { switch 100 }
loopbackDetect OBJECT IDENTIFIER ::= { switch 105 }
ipsla OBJECT IDENTIFIER ::= { switch 106 }
e3008TS OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E300,8TS."
::= { product 3080 }
e30016TX OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E300,16TX."
::= { product 3160 }
e3508T12X OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E350,8T12X."
::= { product 3200 }
e30024TS OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E300,24TS."
::= { product 3240 }
e30024ST OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E300,24ST."
::= { product 3241 }
e30048TS OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E300,48TS."
::= { product 3480 }
b30048T OBJECT-IDENTITY
STATUS current
DESCRIPTION
"B300,48T."
::= { product 3481 }
e33048T OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E330,48T."
::= { product 3485 }
e33048SE OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E330,48SE."
::= { product 3486 }
e33048S OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E330,48S."
::= { product 3487 }
g24eu OBJECT-IDENTITY
STATUS current
DESCRIPTION
"G24EU,24+4."
::= { product 3488 }
e35048T4X OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E350,48T4X."
::= { product 3520 }
e58024Q OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E580,24Q."
::= { product 5801 }
e58048X2Q4Z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E580,48X2Q4Z."
::= { product 5802 }
e58048X6Q OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E580,48X6Q."
::= { product 5803 }
e58032X2Q OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E580,32X2Q."
::= { product 5804 }
e58032X OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E580,32X."
::= { product 5805 }
e58020Q4Z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E580,20Q4Z."
::= { product 5806 }
e602 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E600,2 slots."
::= { product 6020 }
e606 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E600,6 slots."
::= { product 6060 }
e614 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E600,14 slots."
::= { product 6140 }
e802 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E800,2 slots"
::= { product 8020 }
e806 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E800,6 slots"
::= { product 8060 }
e814 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"E800,14 slots"
::= { product 8140 }
memory OBJECT IDENTIFIER ::= { system 1 }
systemStats OBJECT IDENTIFIER ::= { system 2 }
operate OBJECT IDENTIFIER ::= { system 3 }
--sysImageTable OBJECT IDENTIFIER ::= { system 4 }
sysImageTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The system image management table."
::= { system 4 }
flash OBJECT IDENTIFIER ::= { system 5 }
cf OBJECT IDENTIFIER ::= { system 6 }
sysTrap OBJECT IDENTIFIER ::= { system 7 }
time OBJECT IDENTIFIER ::= { system 8 }
-- Sub Module: SYSTEM
ErrorFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a possible error condition."
SYNTAX INTEGER { noError(0), error(1) }
memIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index. This should always return the integer 0."
::= { memory 1 }
memTotalReal OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real/physical memory installed on this host."
::= { memory 5 }
memTotalFree OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of memory free or available for use on
this host.This value typically covers both real memory
and swap space or virtual memory."
::= { memory 11 }
memTotalUsed OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of memory used on this host.
This value typically covers both real memory
and swap space or virtual memory."
::= { memory 12 }
-- systemStats OBJECT IDENTIFIER ::= { system 2 }
ssIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index.This should always return the integer 1."
::= { systemStats 1 }
ssCpuIdle OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of processor time spent idle, calculated over the last
minute."
::= { systemStats 11 }
-- The agent only implements those of the following counters that the
-- kernel supports! Don't expect all to be present.
-- sysProcessTable OBJECT IDENTIFIER ::= { systemStats 100 }
sysProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The system precess table."
::= { systemStats 100 }
sysProcessEntry OBJECT-TYPE
SYNTAX SysProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entity process entry. Each entry consists of information of an process.
The sysProcessIndex exclusively defines an process id."
INDEX { sysProcessIndex }
::= { sysProcessTable 1 }
SysProcessEntry ::=
SEQUENCE
{
sysProcessIndex
Integer32,
sysProcessName
OCTET STRING
}
sysProcessIndex OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pid of process."
::= { sysProcessEntry 1 }
sysProcessName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the process."
::= { sysProcessEntry 2 }
-- operate OBJECT IDENTIFIER ::= { system 3 }
configSave OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This should always write running-config to startup-config.And the
valid set value is 1. When get the configSave value, 1 means success, 0 means failure."
::= { operate 1 }
reload OBJECT-TYPE
SYNTAX INTEGER
{
rebootWithoutSave(1),
saveAndReboot(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This should allow to reboot the switch.The valid input value is 1 and 2.
Value 1 means the switch will reboot without savingcurrent configuration.
Value 2 means the switch will savecurrent configuration before reboot the switch."
::= { operate 2 }
rebootAt OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify auto reboot parameters at the special time. 0 is mean clear."
::= { operate 3 }
rebootDelay OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify auto reboot parameters reboot after delay some time. The value is [1, 720] minutes. 0 is mean clear."
::= { operate 4 }
version OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description the current version "
::= { operate 5 }
serviceTelnet OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Telnet service.1:enable 2:disable."
::= { operate 6 }
loginFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This node only for login fail for three time."
::= { operate 7 }
lastCommand OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Save the last command line and time."
::= { operate 8 }
currentRunningImage OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the current running image."
::= { operate 9 }
sysStartUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show system startup time."
::= { operate 10 }
--sysImageTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF SysImageEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The system image management table."
-- ::= { system 4 }
sysImageEntry OBJECT-TYPE
SYNTAX SysImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entity image entry.Each entry consists of information of an entity image.
The sysImageIndex exclusively defines an image file."
INDEX { sysImageIndex }
::= { sysImageTable 1 }
SysImageEntry ::=
SEQUENCE
{
sysImageIndex
Integer32,
sysImageName
OCTET STRING,
sysImageCreateTime
OCTET STRING,
sysImageVersion
OCTET STRING,
sysImageSize
OCTET STRING,
sysImageDir
OCTET STRING,
sysImageIsBoot
TruthValue
}
sysImageIndex OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of image."
::= { sysImageEntry 1 }
sysImageName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file name of the image."
::= { sysImageEntry 2 }
sysImageCreateTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The create time of the image."
::= { sysImageEntry 3 }
sysImageVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the image."
::= { sysImageEntry 4 }
sysImageSize OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the image."
::= { sysImageEntry 5 }
sysImageDir OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dir of the image."
::= { sysImageEntry 6 }
sysImageIsBoot OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This image is the boot image (1),and is not the boot image (2). Only support enable(1)."
::= { sysImageEntry 7 }
--
-- System Traps
--
--time OBJECT IDENTIFIER ::= { system 8 }
timeSet OBJECT IDENTIFIER ::= { time 1 }
timeSetClock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"current time. format HH:MM:SS."
::= { timeSet 1 }
timeSetMonth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Month of the year. range is [1, 12]."
::= { timeSet 2 }
timeSetDay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Day of the month. range is [1, 31]."
::= { timeSet 3 }
timeSetYear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Year of the date. range is [2000, 2037]."
::= { timeSet 4 }
timezoneSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF TimezoneSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of SummerTime."
::= { time 2 }
timezoneSetEntry OBJECT-TYPE
SYNTAX TimezoneSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of timezone."
INDEX { timezoneSetZoneName }
::= { timezoneSetTable 1 }
TimezoneSetEntry ::=
SEQUENCE
{
timezoneSetZoneName
OCTET STRING,
timezoneSetType
Integer32,
timezoneSetHours
Integer32,
timezoneSetMinutes
Integer32,
timezoneSetSeconds
Integer32,
timezoneSetState
RowStatus
}
timezoneSetZoneName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Zone name, must be less than 32 characters. only include [a-zA-Z_]. The begin and end character must be alphabet. Its length range is [3, 32)"
::= { timezoneSetEntry 1 }
timezoneSetType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Positive/Negative time zone offset from UTC.
0 means Negative
1 means Positive"
::= { timezoneSetEntry 2 }
timezoneSetHours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hours offset from UTC, must be range 0~23."
::= { timezoneSetEntry 3 }
timezoneSetMinutes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minutes offset from UTC, must be range 0~59."
::= { timezoneSetEntry 4 }
timezoneSetSeconds OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Seconds offset from UTC, must be range 0~59."
::= { timezoneSetEntry 5 }
timezoneSetState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { timezoneSetEntry 6 }
recurrentSummerTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RecurrentSummerTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of SummerTime."
::= { time 3 }
recurrentSummerTimeEntry OBJECT-TYPE
SYNTAX RecurrentSummerTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of SummerTime."
INDEX { recurrentSummerTimeZoneName }
::= { recurrentSummerTimeTable 1 }
RecurrentSummerTimeEntry ::=
SEQUENCE {
recurrentSummerTimeZoneName
OCTET STRING,
recurrentSummerTimeStartMonth
Integer32,
recurrentSummerTimeStartDay
Integer32,
recurrentSummerTimeStartClock
OCTET STRING,
recurrentSummerTimeEndMonth
Integer32,
recurrentSummerTimeEndDay
Integer32,
recurrentSummerTimeEndClock
OCTET STRING,
recurrentSummerTimeOffset
Integer32,
recurrentSummerTimeState
RowStatus
}
recurrentSummerTimeZoneName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Zone name, must be less than 32 characters. only include [a-zA-Z_]. The begin and end character must be alphabet. Its length range is [1, 32)"
::= { recurrentSummerTimeEntry 1 }
recurrentSummerTimeStartMonth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start month of the year. range is [1,12]"
::= { recurrentSummerTimeEntry 2 }
recurrentSummerTimeStartDay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Day in month to start. range is [1, 31]. "
::= { recurrentSummerTimeEntry 3 }
recurrentSummerTimeStartClock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time to start. format HH:MM:SS"
::= { recurrentSummerTimeEntry 4 }
recurrentSummerTimeEndMonth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Month to end. range is [1, 12]."
::= { recurrentSummerTimeEntry 5 }
recurrentSummerTimeEndDay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Day in month to end. range is [1, 31]."
::= { recurrentSummerTimeEntry 6 }
recurrentSummerTimeEndClock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time to end. format HH:MM:SS"
::= { recurrentSummerTimeEntry 7 }
recurrentSummerTimeOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Summer time offset, unit is minute. range is [1, 1440]."
::= { recurrentSummerTimeEntry 8 }
recurrentSummerTimeState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { recurrentSummerTimeEntry 9 }
summerTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SummerTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of SummerTime."
::= { time 4 }
summerTimeEntry OBJECT-TYPE
SYNTAX SummerTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of SummerTime."
INDEX { summerTimeZoneName }
::= { summerTimeTable 1 }
SummerTimeEntry ::=
SEQUENCE {
summerTimeZoneName
OCTET STRING,
summerTimeStartMonth
Integer32,
summerTimeStartDay
Integer32,
summerTimeStartYear
Integer32,
summerTimeStartClock
OCTET STRING,
summerTimeEndMonth
Integer32,
summerTimeEndDay
Integer32,
summerTimeEndYear
Integer32,
summerTimeEndClock
OCTET STRING,
summerTimeOffset
Integer32,
summerTimeState
RowStatus
}
summerTimeZoneName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Zone name, must be less than 32 characters.
only include [a-zA-Z_]. The begin and end character must be alphabet. Its length range is [1, 32)"
::= { summerTimeEntry 1 }
summerTimeStartMonth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start month of the year. range is [1, 12]."
::= { summerTimeEntry 2 }
summerTimeStartDay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start day of month. range is [1, 31]."
::= { summerTimeEntry 3 }
summerTimeStartYear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start year of summer-time. range is [2000, 2037]."
::= { summerTimeEntry 4 }
summerTimeStartClock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start time. format HH:MM:SS."
::= { summerTimeEntry 5 }
summerTimeEndMonth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End month of year. range is [1, 12]."
::= { summerTimeEntry 6 }
summerTimeEndDay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End day of month. range is [1, 31]."
::= { summerTimeEntry 7 }
summerTimeEndYear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End year of summer time. range is [2000, 2037]."
::= { summerTimeEntry 8 }
summerTimeEndClock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End time. format HH:MM:SS."
::= { summerTimeEntry 9 }
summerTimeOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Summer time offset, unit is minute. range is [1, 1440]."
::= { summerTimeEntry 10 }
summerTimeState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { summerTimeEntry 11 }
cpuUsage OBJECT IDENTIFIER ::= { system 9 }
fiveSeconds OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU usage within five seconds."
::= { cpuUsage 1 }
oneMinute OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU usage within one minute."
::= { cpuUsage 2 }
fiveMinutes OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU usage within five minutes."
::= { cpuUsage 3 }
-- Sub Module: FLASH
--
-- Textual conventions
--
FlashOperationStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of the specified operation can be one of
the following.
opInProgress : the operation is in process.
opSuccess : the operation has been completed successfully.
opInvalid : the command is invalid or command-protocol-device combination
is unsupported by the system.
opInvalidProtocol :invalid protocol is specified
opInvalidSourceName :invalid source file name is specified.
opInvalidDestName :invalid target name is specified.
opInvalidServerAddress :invalid server address is specified
opDeviceBusy :the device is in use and locked by another process
opDeviceOpenError :invalid device name is specified.
opDeviceError : device read, write or erase error
opDeviceNotProgrammable :device isread-only but a write or
erase operation was specified.
opDeviceFull : device is filled to capacity
opFileOpenError :invalid file name; file not found in partition
opFileTransferError :file transfer was unsuccessful
opFileChecksumError :file checksum in Flash is invalid
opNoMemory :system is running in low on memory
opUnknownFailure :failure which is unknown
opDeleteFileOpenError :file is in used by another process
opDeleteInvalidDevice :invalid device name is specified
opDeleteInvalidFunction :deleted operation is unsupported
by the device.
opDeleteOperationError :operation is in a low error
opDeleteInvalidFileName :invalid file name is specified
pDeleteDeviceBusy :the device is in use and locked
by another process.
opDeleteParaError :the parameters are invalid
opDeleteInvalidPath :the file path is invalid."
SYNTAX INTEGER
{
opInProgress(1),
opSuccess(2),
opInvalid(3),
opInvalidProtocol(4),
opInvalidSourceName(5),
opInvalidDestName(6),
opInvalidServerAddress(7),
opDeviceBusy(8),
opDeviceOpenError(9),
opDeviceError(10),
opDeviceNotProgrammable(11),
opDeviceFull(12),
opFileOpenError(13),
opFileTransferError(14),
opFileChecksumError(15),
opNoMemory(16),
opAuthFail(17),
opTimeout(18),
opUnknownFailure(19),
opDeleteFileOpenError(20),
opDeleteInvalidDevice(21),
opDeleteInvalidFunction(22),
opDeleteOperationError(23),
opDeleteInvalidFileName(24),
opDeleteDeviceBusy(25),
opDeleteParaError(26),
opDeleteInvalidPath(27)
}
--
-- Node definitions
--
-- Flash device management MIB object
flashManMIBObjects OBJECT IDENTIFIER ::= { flash 1 }
-- The flash device information.
flashDevice OBJECT IDENTIFIER ::= { flashManMIBObjects 1 }
flashTable OBJECT-TYPE
SYNTAX SEQUENCE OF FlashEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table gives the properties of all the flashes on the system."
::= { flashDevice 1 }
flashEntry OBJECT-TYPE
SYNTAX FlashEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of flashTable."
INDEX { flhIndex }
::= { flashTable 1 }
FlashEntry ::=
SEQUENCE {
flhIndex
Integer32,
flhSize
OCTET STRING,
flhFree
OCTET STRING,
flhName
OCTET STRING,
-- flhChipNum
-- Integer32,
flhDescr
OCTET STRING
-- flhInitTime
-- TimeStamp
-- flhRemovable
-- TruthValue,
-- flhPartitionBool
-- TruthValue,
-- flhMinPartitionSize
-- Integer32,
-- flhMaxPartitions
-- Integer32,
-- flhPartitionNum
-- Integer32
}
flhIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of flashTable.It has a minimum value of 1, and maximum value
of the same as the value of flhSupportNum."
::= { flashEntry 1 }
flhSize OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total size of the flash device indexed by flhIndex.
The value should be zero if the flash is removed for a removable device."
::= { flashEntry 2 }
flhFree OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the free size of the flash device."
::= { flashEntry 3 }
flhName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flash name within the system."
::= { flashEntry 4 }
--flhChipNum OBJECT-TYPE
-- SYNTAX Integer32 (1..64)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The chip numbers in the flash."
-- ::= { flashEntry 5 }
flhDescr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DESCRIPTION of the purpose of the flash in the system."
::= { flashEntry 6 }
--flhInitTime OBJECT-TYPE
-- SYNTAX TimeStamp
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "
-- The initialization time for the flash component or partition,
-- recorded using the system time.This will be the boot time for
-- a fixed device.For a removable component or a partition,
-- it will be the initialization time.
-- "
-- ::= { flashEntry 8 }
--flhRemovable OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "
-- The value indicates whether the flash indexed can be removed
-- or not.
-- The true(1) value indicates the flash device CAN be removed.
-- "
-- ::= { flashEntry 9 }
--
--
--flhPartitionBool OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "
-- The value indicates whether the flash indexed can be partitioned
-- or not.
-- The true(1) value indicates the flash CAN be partitioned.
-- "
-- ::= { flashEntry 11 }
--
--
--flhMinPartitionSize OBJECT-TYPE
-- SYNTAX Integer32
-- UNITS "bytes"
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "
-- Minimum partition size supported.
-- If flhDevicePartitionBool is false, the value
-- of this object is the same as flhSize.
-- "
-- ::= { flashEntry 12 }
--
--
--flhMaxPartitions OBJECT-TYPE
-- SYNTAX Integer32 (1..8)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "
-- The maximum count of partitions which the system supports
-- for this flash.If flhPartitionBool is false,
-- the object value is 1.
-- "
-- ::= { flashEntry 13 }
--
--
--flhPartitionNum OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "
-- The actual number of partitions supported by the system for
-- this flash.If flhPartitionBool is false, this value is 1.
-- "
-- ::= { flashEntry 14 }
flhFiles OBJECT IDENTIFIER ::= { flashDevice 2 }
flhFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF FlhFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of file information."
::= { flhFiles 1 }
flhFileEntry OBJECT-TYPE
SYNTAX FlhFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing a file.Indexed using flash number, partition
number, and file number."
INDEX {flhFileIndex }
::= { flhFileTable 1 }
FlhFileEntry ::=
SEQUENCE {
flhFileIndex
Integer32,
flhFileName
OCTET STRING,
flhFileSize
Integer32,
flhFileTime
OCTET STRING
-- flhFileChecksum
-- OCTET STRING
}
flhFileIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the table, whose range is from 1 to 2147483647."
::= { flhFileEntry 1 }
flhFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A valid file name supported by the file system."
::= { flhFileEntry 2 }
flhFileSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The file size in bytes excluding the file header of file system.
The value should be greater than zero."
::= { flhFileEntry 3 }
flhFileTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when this file is modified last time."
::= { flhFileEntry 4 }
--flhFileChecksum OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The file checksum in the header of file."
-- ::= { flhFileEntry 5 }
-- The operation on the flash.
flashOperate OBJECT IDENTIFIER ::= { flashManMIBObjects 2 }
flhOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FlhOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table used to operate flash."
::= { flashOperate 1 }
flhOpEntry OBJECT-TYPE
SYNTAX FlhOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Note an operation can not be stopped until it is finished.
If notification is configured, NMS will receive a notification
at the end of the operation.
Entries in the table will be removed automatically in 5 minutes.
It can also be deleted by NMS directly."
INDEX { flhOperIndex }
::= { flhOpTable 1 }
FlhOpEntry ::=
SEQUENCE {
flhOperIndex
Integer32,
flhOperType
INTEGER,
flhOperProtocol
INTEGER,
flhOperServerAddress
IpAddress,
flhOperServerUser
OCTET STRING,
flhOperPassword
OCTET STRING,
flhOperSourceFile
OCTET STRING,
flhOperDestinationFile
OCTET STRING,
flhOperStatus
FlashOperationStatus ,
-- flhOperEndNotification
-- TruthValue,
-- flhOperProgress
-- TimeTicks,
flhOperIsManagementIf
TruthValue,
flhOperRowStatus
RowStatus
}
flhOperIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Specifies the index of an entry.It is a
random value when creating an entry."
::= { flhOpEntry 1 }
flhOperType OBJECT-TYPE
SYNTAX INTEGER
{
flash2Flash(1),
net2Flash(2),
flash2Net(3),
delete(4),
rename(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the operation to be executed.
flash2Flash(1) Copy a file from flash to flash.
net2Flash(2) Copy a file from net to flash;
flash2Net(3) Copy a file from flash to net.
delete(4) Delete a file from flash, the file name is specified by flhOperSourceFile;
rename(5) Change a file's name."
::= { flhOpEntry 2 }
flhOperProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
tftp(2)
-- clusterftp(3),
-- clustertftp(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the protocol used to transfer file.
The default protocol is ftp.
Both member switch and commander switch can use them if they
support HGMP v2.
1 FTP
2 TFTP"
-- DEFVAL { ftp }
::= { flhOpEntry 3 }
flhOperServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of remote host acting as server for operation.
The default value is 0.0.0.0."
-- DEFVAL { 0.0.0.0 }
::= { flhOpEntry 4 }
flhOperServerUser OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When using ftp to transfer files, the user name must be
specified through this node."
::= { flhOpEntry 5 }
flhOperPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remote user password for copying via ftp protocol.Optionally,
This object may be ignored for protocols other than ftp."
::= { flhOpEntry 6 }
flhOperSourceFile OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the source file name to be transferred.
It may be located on flash or remote server.
It may include the file path if it is applicable.
It must be specified."
::= { flhOpEntry 7 }
flhOperDestinationFile OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the destination file name.
It may be located on flash or remote server.
It may include the file path if it is applicable.
If it is not specified, the destination file name
is the same as source file name for application."
::= { flhOpEntry 8 }
flhOperStatus OBJECT-TYPE
SYNTAX FlashOperationStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the specified operation can be one of
the following.
opInProgress(1) : the operation is in process.
opSuccess(2) : the operation has been completed successfully.
opInvalid(3) : the command is invalid or command-protocol-device combination is unsupported by the system.
opInvalidProtocol(4) :invalid protocol is specified
opInvalidSourceName(5) :invalid source file name is specified.
opInvalidDestName(6) :invalid target name is specified.
opInvalidServerAddress(7) :invalid server address is specified
opDeviceBusy(8) :the device is in use and locked by another process
opDeviceOpenError(9) :invalid device name is specified.
opDeviceError(10) : device read, write or erase error
opDeviceNotProgrammable(11) :device isread-only but a write or erase operation was specified.
opDeviceFull(12) : device is filled to capacity
opFileOpenError(13) :invalid file name; file not found in partition
opFileTransferError(14) :file transfer was unsuccessful
opFileChecksumError(15) :file checksum in Flash is invalid
opNoMemory(16) :system is running in low on memory
opUnknownFailure(19) :failure which is unknown
opDeleteFileOpenError(20) :file is in used by another process
opDeleteInvalidDevice(21) :invalid device name is specified
opDeleteInvalidFunction(22) :deleted operation is unsupported by the device.
opDeleteOperationError(23) :operation is in a low error
opDeleteInvalidFileName(24) :invalid file name is specified
pDeleteDeviceBusy(25) :the device is in use and locked by another process.
opDeleteParaError(26) :the parameters are invalid
opDeleteInvalidPath(27) :the file path is invalid."
::= { flhOpEntry 9 }
--flhOperEndNotification OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "
-- If the value of it is specified 'true', a notification
-- will be generated at the end of the operation.
-- Else no notification will be generated.
-- "
-- DEFVAL { false }
-- ::= { flhOpEntry 10 }
--flhOperProgress OBJECT-TYPE
-- SYNTAX TimeTicks
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The progress described as the time taken for the operation.
-- "
-- ::= { flhOpEntry 11 }
flhOperIsManagementIf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If use management interface running SNMP or not, true(1):enable.false(2):disable"
-- DEFVAL { true }
::= { flhOpEntry 12 }
flhOperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { flhOpEntry 13 }
-- flashNotification OBJECT IDENTIFIER ::= { flashManMIBObjects 3 }
--
--
-- flhOperNotification NOTIFICATION-TYPE
-- OBJECTS { flhOperStatus }
-- STATUS current
-- DESCRIPTION
-- "
-- A flhOperNotification is sent at the completion of a flash
-- copy operation if flhOperEndNotification is true.
-- "
-- ::= { flashNotification 1 }
-- Sub Module: CF
--
-- Textual conventions
--
CfOperationStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of the specified operation can be one of the following.
opInProgress : the operation is in process.
opSuccess : the operation has been completed successfully.
opInvalid : the command is invalid or command-protocol-device combination is
unsupported by the system.
opInvalidProtocol :invalid protocol is specified
opInvalidSourceName :invalid source file name is specified.
opInvalidDestName :invalid target name is specified.
opInvalidServerAddress :invalid server address is specified
opDeviceBusy :the device is in use and locked by another process
opDeviceOpenError :invalid device name is specified.
opDeviceError : device read, write or erase error
opDeviceNotProgrammable :device isread-only but a write or
erase operation was specified
opDeviceFull : device is filled to capacity
opFileOpenError :invalid file name; file not found in partition
opFileTransferError :file transfer was unsuccessful
opFileChecksumError :file checksum in Cf is invalid
opNoMemory :system is running in low on memory
opUnknownFailure :failure which is unknown
opDeleteFileOpenError :file is in used by another process
opDeleteInvalidDevice :invalid device name is specified
opDeleteInvalidFunction :deleted operation is unsupported
by the device
opDeleteOperationError :operation is in a low error
opDeleteInvalidFileName :invalid file name is specified
pDeleteDeviceBusy :the device is in use and locked
by another process
opDeleteParaError :the parameters are invalid
opDeleteInvalidPath :the file path is invalid."
SYNTAX INTEGER
{
opInProgress(1),
opSuccess(2),
opInvalid(3),
opInvalidProtocol(4),
opInvalidSourceName(5),
opInvalidDestName(6),
opInvalidServerAddress(7),
opDeviceBusy(8),
opDeviceOpenError(9),
opDeviceError(10),
opDeviceNotProgrammable(11),
opDeviceFull(12),
opFileOpenError(13),
opFileTransferError(14),
opFileChecksumError(15),
opNoMemory(16),
opAuthFail(17),
opTimeout(18),
opUnknownFailure(19),
opDeleteFileOpenError(20),
opDeleteInvalidDevice(21),
opDeleteInvalidFunction(22),
opDeleteOperationError(23),
opDeleteInvalidFileName(24),
opDeleteDeviceBusy(25),
opDeleteParaError(26),
opDeleteInvalidPath(27)
}
--
-- Node definitions
--
-- Cf device management MIB object
cfManMIBObjects OBJECT IDENTIFIER ::= { cf 1 }
-- The cf device information.
cfDevice OBJECT IDENTIFIER ::= { cfManMIBObjects 1 }
cfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table gives the properties of all the cfes on the system."
::= { cfDevice 1 }
cfEntry OBJECT-TYPE
SYNTAX CfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of cfTable."
INDEX { cfIndex }
::= { cfTable 1 }
CfEntry ::=
SEQUENCE {
cfIndex
Integer32,
cfSize
OCTET STRING,
cfFree
OCTET STRING,
cfName
OCTET STRING,
-- cfChipNum
-- Integer32,
cfDescr
OCTET STRING
-- cfInitTime
-- TimeStamp
-- cfRemovable
-- TruthValue,
-- cfPartitionBool
-- TruthValue,
-- cfMinPartitionSize
-- Integer32,
-- cfMaxPartitions
-- Integer32,
-- cfPartitionNum
-- Integer32
}
cfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of cfTable.It has a minimum value of 1, and
maximum value of the same as the value of cfSupportNum."
::= { cfEntry 1 }
cfSize OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Specifies the total size of the cf device indexed
by cfIndex.The value should be zero if the cf is
removed for a removable device. "
::= { cfEntry 2 }
cfFree OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the free size of the cf device."
::= { cfEntry 3 }
cfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cf name within the system."
::= { cfEntry 4 }
--cfChipNum OBJECT-TYPE
-- SYNTAX Integer32 (1..64)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The chip numbers in the cf."
-- ::= { cfEntry 5 }
cfDescr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the purpose of the cf in the system."
::= { cfEntry 6 }
cfFiles OBJECT IDENTIFIER ::= { cfDevice 2 }
cfFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of file information."
::= { cfFiles 1 }
cfFileEntry OBJECT-TYPE
SYNTAX CfFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry representing a file. Indexed using cf number,
partition number, and file number.
"
INDEX {cfFileIndex }
::= { cfFileTable 1 }
CfFileEntry ::=
SEQUENCE {
cfFileIndex
Integer32,
cfFileName
OCTET STRING,
cfFileSize
Integer32,
cfFileTime
OCTET STRING
-- cfFileChecksum
-- OCTET STRING
}
cfFileIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the table, whose range is from 1 to 2147483647"
::= { cfFileEntry 1 }
cfFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A valid file name supported by the file system."
::= { cfFileEntry 2 }
cfFileSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The file size in bytes excluding the file
header of file system. The value should be greater than zero.
"
::= { cfFileEntry 3 }
cfFileTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time when this file is modified last time.
"
::= { cfFileEntry 4 }
-- The operation on the cf.
cfOperate OBJECT IDENTIFIER ::= { cfManMIBObjects 2 }
cfOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table used to operate cf."
::= { cfOperate 1 }
cfOpEntry OBJECT-TYPE
SYNTAX CfOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Note an operation can not be stopped until it is finished.
If notification is configured, NMS will receive a notification
at the end of the operation.
Entries in the table will be removed automatically in 5 minutes.
It can also be deleted by NMS directly."
INDEX { cfOperIndex }
::= { cfOpTable 1 }
CfOpEntry ::=
SEQUENCE {
cfOperIndex
Integer32,
cfOperType
INTEGER,
cfOperProtocol
INTEGER,
cfOperServerAddress
IpAddress,
cfOperServerUser
OCTET STRING,
cfOperPassword
OCTET STRING,
cfOperSourceFile
OCTET STRING ,
cfOperDestinationFile
OCTET STRING,
cfOperStatus
CfOperationStatus,
-- cfOperEndNotification
-- TruthValue,
-- cfOperProgress
-- TimeTicks,
cfOperIsManagementIf
TruthValue,
cfOperRowStatus
RowStatus
}
cfOperIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the index of an entry. It is a
random value when creating an entry."
::= { cfOpEntry 1 }
cfOperType OBJECT-TYPE
SYNTAX INTEGER
{
cf2Cf(1),
net2Cf(2),
cf2Net(3),
delete(4),
rename(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the operation to be executed.
net2CfWithErase Copy a file to cf; erase cf beforehand.
net2CfWithoutErase Copy a file to cf; do not erase cf
beforehand.
cf2Net Copy a file from cf.
delete Delete a file from cf, the file name is
specified by cfOperSourceFile;
rename Change a file's name."
::= { cfOpEntry 2 }
cfOperProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(1),
tftp(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the protocol used to transfer file.The default protocol is ftp.
when 'clusterftp' or 'clustertftp' is selected, the cfOperServerAddress needn't
be set the server address can be acquired automatically, the value of
cfOperServerAddress is uncertain during operation.Both member switch and
commander switch can use them if they support HGMP v2."
-- DEFVAL { ftp }
::= { cfOpEntry 3 }
cfOperServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of remote host acting as server for operation.
The default value is 255.255.255.255."
-- DEFVAL { 'FFFFFFFF'h }
::= { cfOpEntry 4 }
cfOperServerUser OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When using ftp to transfer files, the user name must be specified through
this node."
::= { cfOpEntry 5 }
cfOperPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remote user password for copying via ftp protocol.Optionally.
This object may be ignored for protocols other than ftp."
::= { cfOpEntry 6 }
cfOperSourceFile OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the source file name to be transferred.
It may be located on cf or remote server.
It may include the file path if it is applicable.
It must be specified."
::= { cfOpEntry 7 }
cfOperDestinationFile OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the destination file name.
It may be located on cf or remote server.
It may include the file path if it is applicable.
If it is not specified, the destination file name
is the same as source file name for application."
::= { cfOpEntry 8 }
cfOperStatus OBJECT-TYPE
SYNTAX CfOperationStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of operation."
::= { cfOpEntry 9 }
--cfOperEndNotification OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "
-- If the value of it is specified 'true', a notification
-- will be generated at the end of the operation.
-- Else no notification will be generated.
-- "
-- DEFVAL { false }
-- ::= { cfOpEntry 10 }
--
--
--cfOperProgress OBJECT-TYPE
-- SYNTAX TimeTicks
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The progress described as the time taken for the operation."
-- ::= { cfOpEntry 11 }
cfOperIsManagementIf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If use management interface running SNMP or not."
-- DEFVAL { true }
::= { cfOpEntry 12 }
cfOperRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfOpEntry 13 }
-- Sub Module: SYSLOG
--
-- Textual conventions
--
MessageLevelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify severity level of message."
SYNTAX INTEGER
{
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
informational(6),
debug(7)
}
MessageTrapLevelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify severity level of message."
SYNTAX INTEGER
{
high(0),
middle(1),
lower(2),
minor(3)
}
TimeStampFormatType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify operation types on time stamp of message.
none: no time stamp information in message.
date: the time stamp type of message is date.
boot: the time stamp type of message is the time from uptime of system.
dateWithoutYear: the time stamp type of message is date without year
information."
SYNTAX INTEGER
{
bsd(0),
iso(1),
full(2),
null(3)
}
FacilityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify loghost facility which generates messages."
SYNTAX INTEGER
{
kernel(0),
userLevel(1),
mailSystem(2),
systemDaemons(3),
securityAuthorization(4),
syslog(5),
linePrinter(6),
networkNews(7),
uucp(8),
cron(9),
securityAuthorization2(10),
ftpDaemon(11),
ntp(12),
logAudit(13),
logAlert(14),
clockDaemon2(15),
local0(16),
local1(17),
local2(18),
local3(19),
local4(20),
local5(21),
local6(22),
local7(23)
}
--
--
-- Node definitions
--
syslogTimestamp OBJECT-TYPE
SYNTAX TimeStampFormatType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The log timestamp type.
0 RBSD(RFC3164 or bsd).
1 RISO(RFC3339 or iso).
2 RFULL(date).
3 NONE."
::= { syslog 1 }
syslogOperateLogEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of log operate true(1):enable.false(2):disable."
::= { syslog 2 }
syslogBuffer OBJECT IDENTIFIER ::= { syslog 3 }
syslogBufferMaxSize OBJECT-TYPE
SYNTAX INTEGER(10..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of messages that can be storedin logbuffer.MaxSize range 10~1000."
::= { syslogBuffer 1 }
syslogbufferSeverity OBJECT-TYPE
SYNTAX MessageLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operations staff can selectively filter the messages
with priority which consists of severity that generates
the message and severity of the message.Range 0~7.
"
-- DEFVAL { 7 }
::= { syslogBuffer 2 }
syslogBuffercurrentMessages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of log messages stored in logbuffer."
::= { syslogBuffer 3 }
syslogBufferDroppedMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of log messages dropped in logbuffer."
::= { syslogBuffer 4 }
--
syslogFile OBJECT IDENTIFIER ::= { syslog 4 }
syslogFileEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of log merge true(1):enable.false(2):disable."
::= { syslogFile 1 }
syslogFileSeverity OBJECT-TYPE
SYNTAX MessageLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operations staff can selectively filter the messages with priority
which consists of severity that generates the message and severity of
the message.Range 0~7."
::= { syslogFile 2 }
syslogServer OBJECT IDENTIFIER ::= { syslog 5 }
syslogServerEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of syslogtrap: true(1): enable.false(2): disable."
::= { syslogServer 1 }
syslogServerFacility OBJECT-TYPE
SYNTAX FacilityType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operations staff can selectively filter the messages with priority
which consists of facility that generates the message and severity of
the message.Value range 0~11 or 16~23."
-- DEFVAL { local7 }
::= { syslogServer 2 }
syslogServerSeverity OBJECT-TYPE
SYNTAX MessageLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operations staff can selectively filter the messages with priority
which consists of severity that generates the message and severity of
the message.Value range 0~7.default 4"
::= { syslogServer 3 }
syslogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of loghost."
::= { syslogServer 4 }
syslogServerEntry OBJECT-TYPE
SYNTAX SyslogServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The loghost entry of syslog."
INDEX { syslogServerIpaddress, syslogServerMgmtIf }
::= { syslogServerTable 1 }
SyslogServerEntry ::=
SEQUENCE {
syslogServerIpaddress
IpAddress,
syslogServerMgmtIf
INTEGER,
syslogServerRowStatus
RowStatus
}
syslogServerIpaddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip address of loghost."
::= { syslogServerEntry 1 }
syslogServerMgmtIf OBJECT-TYPE
SYNTAX INTEGER
{
noUse(1),
useMgmtIf(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mgmt if of loghost.
1 noUse.
2 useMgmtIf."
::= { syslogServerEntry 2 }
syslogServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { syslogServerEntry 3 }
syslogTrap OBJECT IDENTIFIER ::= { syslog 6 }
syslogTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of syslog trap. true(1):enable.false(2):disable."
::= { syslogTrap 1 }
syslogTrapSeverity OBJECT-TYPE
SYNTAX MessageTrapLevelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operations staff can selectively filter the messages with priority
which consists of severity that generates the message and severity of
the message.
0 high.
1 middle.
2 lower.
3 minor."
::= { syslogTrap 2 }
syslogMerge OBJECT IDENTIFIER ::= { syslog 7 }
syslogMergeEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of log merge true(1):enable.false(2):disable."
::= { syslogMerge 1 }
syslogMergeFifoSize OBJECT-TYPE
SYNTAX INTEGER(100..10240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logging merge fifo-size, specify the logging merge buffer."
::= { syslogMerge 2 }
syslogMergeTimeout OBJECT-TYPE
SYNTAX INTEGER(1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logging merge timeout value, specify the logging merge interval.default 10."
::= { syslogMerge 3 }
syslogSync OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify sync parameter. true(1): sync the syslog and return value is always 0."
::= { syslog 8 }
syslogClearLogBuff OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear logging buffer. true(1): clear the logging buffer and return value is always 0."
::= { syslog 9 }
-- Sub Module: MIRROR
mSSrcIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSSrcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of mirror session source port entries."
::= { mirror 1 }
mSSrcIfEntry OBJECT-TYPE
SYNTAX MSSrcIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that describe a source port to be added to a mirror
session."
INDEX
{
mSSrcIfID,
mSSrcIfIndex
}
::= { mSSrcIfTable 1 }
MSSrcIfEntry ::=
SEQUENCE
{
mSSrcIfID
Integer32,
mSSrcIfIndex
Integer32,
mSSrcIfDirection
INTEGER,
mSSrcIfRowStatus
RowStatus
}
mSSrcIfID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the mirror session table."
::= { mSSrcIfEntry 1 }
mSSrcIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of mirror group source port. including ethernet port and agg port"
::= { mSSrcIfEntry 2 }
mSSrcIfDirection OBJECT-TYPE
SYNTAX INTEGER
{
rx(1),
tx(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mirror direction of source port.if the direction first configured
as rx, then configure tx, then the direction will be both."
::= { mSSrcIfEntry 3 }
mSSrcIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mSSrcIfEntry 4 }
mSSrcVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSSrcVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of mirror session source vlan entries."
::= { mirror 2 }
mSSrcVlanEntry OBJECT-TYPE
SYNTAX MSSrcVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that describe a source vlan to be added to a mirror session."
INDEX
{
mSSrcVlanID,
mSSrcVlanNum
}
::= { mSSrcVlanTable 1 }
MSSrcVlanEntry ::=
SEQUENCE
{
mSSrcVlanID
Integer32,
mSSrcVlanNum
Integer32,
mSSrcVlanDirection
INTEGER,
mSSrcVlanRowStatus
RowStatus
}
mSSrcVlanID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the mirror session table."
::= { mSSrcVlanEntry 1 }
mSSrcVlanNum OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of mirror group source vlan."
::= { mSSrcVlanEntry 2 }
mSSrcVlanDirection OBJECT-TYPE
SYNTAX INTEGER
{
rx(1),
tx(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mirror direction of source vlan.if the direction first configured as
rx, then configure tx, then the direction will be both."
::= { mSSrcVlanEntry 3 }
mSSrcVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mSSrcVlanEntry 4 }
mSDestIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSDestIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of mirror group dest port entries."
::= { mirror 3 }
mSDestIfEntry OBJECT-TYPE
SYNTAX MSDestIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that describe a dest port to be added to a mirror group."
INDEX
{
mSDestIfID
}
::= { mSDestIfTable 1 }
MSDestIfEntry ::=
SEQUENCE
{
mSDestIfID
Integer32,
mSDestIfIndex
Integer32,
mSSessionType
INTEGER,
mSDestVlanID
Integer32,
mSDestIfRowStatus
RowStatus
}
mSDestIfID OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the mirror session table."
::= { mSDestIfEntry 1 }
mSDestIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..1023)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IfIndex of mirror group dest port. only ethernet port. "
::= { mSDestIfEntry 2 }
mSSessionType OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
remote(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"session type."
::= { mSDestIfEntry 3 }
mSDestVlanID OBJECT-TYPE
SYNTAX Integer32 (2..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IfIndex of mirror group dest vlan."
::= { mSDestIfEntry 4 }
mSDestIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mSDestIfEntry 5 }
mSTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of mirror group entries."
::= { mirror 4 }
mSEntry OBJECT-TYPE
SYNTAX MSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that describe a mirror group."
INDEX
{
mSID
}
::= { mSTable 1 }
MSEntry ::=
SEQUENCE
{
mSID
Integer32,
mSType
INTEGER,
mSStatus
INTEGER,
mSRowStatus
RowStatus
}
mSID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the mirror session table."
::= { mSEntry 1 }
mSType OBJECT-TYPE
SYNTAX INTEGER
{
local(1) ,
remote(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of a mirror session.
1 Local.
2 remote."
::= { mSEntry 2 }
mSStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a mirror session.A mirror session will be active only when it has destination port.
1 Active.
2 Inactive."
::= { mSEntry 3 }
mSRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize Destroy and Active."
::= { mSEntry 4 }
--
--mSEscapeMacTable
--
mSEscapeMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSEscapeMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of mirror session escape mac entries."
::= { mirror 5 }
mSEscapeMacEntry OBJECT-TYPE
SYNTAX MSEscapeMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of parameters that describe a escape mac to be added to a mirror session."
INDEX
{
mSEscapeMacIndex
}
::= { mSEscapeMacTable 1 }
MSEscapeMacEntry ::=
SEQUENCE
{
mSEscapeMacIndex
INTEGER,
mSEscapeMacAddress
OCTET STRING,
mSEscapeMacMask
OCTET STRING,
mSEscapeMacRowStatus
RowStatus
}
mSEscapeMacIndex OBJECT-TYPE
SYNTAX INTEGER(1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of a escape mac.Range 1~2."
::= { mSEscapeMacEntry 1 }
mSEscapeMacAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify certain mac address as special and not mirror."
::= { mSEscapeMacEntry 2 }
mSEscapeMacMask OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mac mask of mirror Specify certain mac address."
::= { mSEscapeMacEntry 3 }
mSEscapeMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1).
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mSEscapeMacEntry 4 }
-- Sub Module: PORTSECURITY
--
-- Node definitions
--
portSecurityObject OBJECT IDENTIFIER ::= { portSecurity 1 }
portSecurityPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the securityStatus of each secure port.
Each port can have a number of authorised MAC addresses, and these are
stored in the portSecurityStaticAddressTable and
portSecurityDynamicAddressTable."
::= { portSecurityObject 1 }
portSecurityPortEntry OBJECT-TYPE
SYNTAX PortSecurityPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is a Rowin this table for each secure port and It is indexed
using the object ifIndex in RFC1213-MIB."
INDEX
{
ifIndex
}
::= { portSecurityPortTable 1 }
PortSecurityPortEntry ::=
SEQUENCE {
portSecurityEnable
INTEGER,
portSecurityViolationMode
INTEGER,
portSecurityMaximumNumberOfMacAddresses
Integer32,
portSecurityCurrentNumberOfMacAddresses
Integer32
}
portSecurityEnable OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls the system wide operation of mac-authentication.
The system-wide mac-authentication options become non-operational
when this attribute is set to disabled."
::= { portSecurityPortEntry 1 }
portSecurityViolationMode OBJECT-TYPE
SYNTAX INTEGER
{
protect(0),
restrict(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute determines what action to be taken when a security violation is detected
protect(0): discard packet silently
restrict(1): discard packet and print log
shutdown(2): discard packet, log and set the interface error-disabled."
::= { portSecurityPortEntry 2 }
portSecurityMaximumNumberOfMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the maximum value that mac addresses can be learned.
Those objects are bound by the relationship:
staticNumberOfConfiguredMacAddresses
<= totalNumberOfMacAddresses
<= portSecurityMaximumMacAddresses."
::= { portSecurityPortEntry 3 }
portSecurityCurrentNumberOfMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates thecurrent number of Mac Addresses."
::= { portSecurityPortEntry 4 }
portSecurityStaticAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityStaticAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the static MAC addresses assigned to each port."
::= { portSecurityObject 2 }
portSecurityStaticAddressEntry OBJECT-TYPE
SYNTAX PortSecurityStaticAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the static MAC addresses assigned to each port."
INDEX
{
ifIndex,
portSecurityStaticMacAddress,
portSecurityStaticVlanId
}
::= { portSecurityStaticAddressTable 1 }
PortSecurityStaticAddressEntry ::=
SEQUENCE {
portSecurityStaticPortIndex
Integer32,
portSecurityStaticVlanId
Integer32,
portSecurityStaticMacAddress
Integer32,
portSecurityStaticRowStatus
RowStatus
}
portSecurityStaticPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port index which port security is configured.
This is the first index into the portSecurityStaticAddressTable."
::= { portSecurityStaticAddressEntry 1 }
portSecurityStaticVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vlan ID associate with the port and the MAC address.
This is the second index into the portSecurityStaticAddressTable."
::= { portSecurityStaticAddressEntry 2 }
portSecurityStaticMacAddress OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of a station assigned to this port.
The index format of mac address '01:02:0a:0b:ff:ff' should be '1.2.10.11.255.255'
This is the third index into the portSecurityStaticAddressTable."
::= { portSecurityStaticAddressEntry 3 }
portSecurityStaticRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { portSecurityStaticAddressEntry 4 }
portSecurityDynamicAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityDynamicAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the dynamic MAC addresses which
are learned each port."
::= { portSecurityObject 3 }
portSecurityDynamicAddressEntry OBJECT-TYPE
SYNTAX PortSecurityDynamicAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the dynamic MAC addresses which
are learned each port."
INDEX
{
ifIndex,
portSecurityDynamicMacAddress,
portSecurityDynamicVlanId
}
::= { portSecurityDynamicAddressTable 1 }
PortSecurityDynamicAddressEntry ::=
SEQUENCE {
portSecurityDynamicVlanId
Integer32,
portSecurityDynamicMacAddress
MacAddress,
portSecurityDynamicPortName
OCTET STRING
}
portSecurityDynamicVlanId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vlan ID associate with the port and the MAC address.
This is the third index into the portSecurityDynamicAddressTable."
::= { portSecurityDynamicAddressEntry 1 }
portSecurityDynamicMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of a station assigned to this port.This
is the second index into the portSecurityDynamicAddressTable."
::= { portSecurityDynamicAddressEntry 2 }
portSecurityDynamicPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name which port security is configured."
::= { portSecurityDynamicAddressEntry 3 }
-- Sub Module:stormCONTROL
stormControlObject OBJECT IDENTIFIER ::= {stormControl 1 }
stormControlUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StormControlUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the port name and storm control
unicast mode,level and pps. "
::= { stormControlObject 1 }
stormControlUnicastEntry OBJECT-TYPE
SYNTAX StormControlUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the port name and storm control unicast mode and level. "
INDEX
{
ifIndex
}
::= { stormControlUnicastTable 1 }
StormControlUnicastEntry ::=
SEQUENCE {
stormControlUnicastPortName
OCTET STRING,
stormControlUnicastMode
INTEGER,
stormControlUnicastLevel
OCTET STRING ,
stormControlUnicastPps
Integer32,
stormControlUnicastRowStatus
RowStatus
}
stormControlUnicastPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of interface which is configuredstorm
control."
::= {stormControlUnicastEntry 1 }
stormControlUnicastMode OBJECT-TYPE
SYNTAX INTEGER
{
packetPerSecond(1),
level(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates which unicast mode is configured whenstorm control is used.
1 PacketPerSecond.
2 Level."
::= {stormControlUnicastEntry 2 }
stormControlUnicastLevel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When unicast mode is configured Level,this
indicates the percentage of bandwith.
The valid range is (0.00-100.00)."
::= {stormControlUnicastEntry 3 }
stormControlUnicastPps OBJECT-TYPE
SYNTAX Integer32 (0..1000000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When unicast mode is configured PacketPerSecond,
this indicates the number of packet per second."
::= {stormControlUnicastEntry 4 }
stormControlUnicastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= {stormControlUnicastEntry 5 }
stormControlBroadcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StormControlBroadcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the port name and storm control
broadcast mode,level and pps. "
::= { stormControlObject 2 }
stormControlBroadcastEntry OBJECT-TYPE
SYNTAX StormControlBroadcastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the port name andstorm control broadcast mode and level."
INDEX
{
ifIndex
}
::= {stormControlBroadcastTable 1 }
StormControlBroadcastEntry ::=
SEQUENCE {
stormControlBroadcastPortName
OCTET STRING ,
stormControlBroadcastMode
INTEGER,
stormControlBroadcastLevel
OCTET STRING ,
stormControlBroadcastPps
Integer32,
stormControlBroadcastRowStatus
RowStatus
}
stormControlBroadcastPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of interface which is configuredstorm
control."
::= {stormControlBroadcastEntry 1 }
stormControlBroadcastMode OBJECT-TYPE
SYNTAX INTEGER
{
packetPerSecond(1),
level(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates which broadcast mode is configured whenstorm control is used.
1 PacketPerSecond.
2 Level."
::= {stormControlBroadcastEntry 2 }
stormControlBroadcastLevel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When broadcast mode is configured Level,this
indicates the percentage of bandwith.
The valid range is (0.00-100.00)."
::= {stormControlBroadcastEntry 3 }
stormControlBroadcastPps OBJECT-TYPE
SYNTAX Integer32 (0..1000000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When broadcast mode is configured PacketPerSecond,
this indicates the number of packet per second."
::= {stormControlBroadcastEntry 4 }
stormControlBroadcastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= {stormControlBroadcastEntry 5 }
stormControlMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StormControlMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the port name andstorm control
multicast mode and level."
::= {stormControlObject 3 }
stormControlMulticastEntry OBJECT-TYPE
SYNTAX StormControlMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the port name andstorm control
multicast,level and pps."
INDEX
{
ifIndex
}
::= {stormControlMulticastTable 1 }
StormControlMulticastEntry ::=
SEQUENCE {
stormControlMulticastPortName
OCTET STRING ,
stormControlMulticastMode
INTEGER,
stormControlMulticastLevel
OCTET STRING ,
stormControlMulticastPps
Integer32,
stormControlMulticastRowStatus
RowStatus
}
stormControlMulticastPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of interface which is configuredstorm control."
::= {stormControlMulticastEntry 1 }
stormControlMulticastMode OBJECT-TYPE
SYNTAX INTEGER
{
packetPerSecond(1),
level(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates which multicast mode is configured whenstorm control is used.
1 PacketPerSecond.
2 Level."
::= {stormControlMulticastEntry 2 }
stormControlMulticastLevel OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When multicast mode is configured Level,this indicates the percentage
of bandwith. The valid range is (0.00-100.00)."
::= {stormControlMulticastEntry 3 }
stormControlMulticastPps OBJECT-TYPE
SYNTAX Integer32 (0..1000000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When multicast mode is configured PacketPerSecond, this indicates the
number of packet per second."
::= {stormControlMulticastEntry 4 }
stormControlMulticastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= {stormControlMulticastEntry 5 }
-- Sub Module: NTP
ntpObject OBJECT IDENTIFIER ::= { ntp 1 }
ntpStratum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an eight-bit integer indicating the stratum level
of the local clock, with values defined as follows:
0, unspecified
1, primary reference (e.g.,, radio clock)
2-255, secondary reference (via NTP) "
::= { ntpObject 1 }
ntpReferenceClockIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the reference clock ip address."
::= { ntpObject 2 }
ntpFrequency OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency of local clock relative to the primary
reference source."
::= { ntpObject 3 }
ntpPrecision OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Precision : This is a signed integer indicating the
precision relative to the reference clock ip."
::= { ntpObject 4 }
ntpReferenceTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the local time."
::= { ntpObject 5 }
ntpRootDelay OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a signed fixed-point number indicating
the total roundtrip delay to the primary reference source
at the root of the synchronization subnet, in seconds."
::= { ntpObject 6 }
ntpRootDispersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Root Dispersion : This is a signed fixed-point number
indicating the maximum error relative to the primary
reference source at the root of the synchronization
subnet, in seconds.Only positive values greater than
zero are possible."
::= { ntpObject 7 }
ntpPeerDispersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a signed fixed-point number indicating
the maximum error of the local clock relative to
the primary reference source at the root of the
synchronization subnet.Only positive values
greater than zero are possible."
::= { ntpObject 8 }
ntpClockOffset OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a signed, fixed-point number indicating the offset
of the local clock relative to the primary clock, in seconds."
::= { ntpObject 9 }
ntpStability OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a signed, fixed-point number indicating the stability
of the local clock relative to the primary clock, in seconds."
::= { ntpObject 10 }
ntpAssoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAssoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information about the peers and servers
with which the local NTP has associations."
::= { ntpObject 11 }
ntpAssoEntry OBJECT-TYPE
SYNTAX NtpAssoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each association entry provides NTP information retrieved
from a particular initiative peer or server.Each peer or
server is identified by a unique association identifier.
Entries are automatically created when the user configures
the passive peer to unicast peer list or the passive server
to unicast server list."
INDEX { ntpAssoRemoteIpAddress }
::= { ntpAssoTable 1 }
NtpAssoEntry ::=
SEQUENCE {
ntpAssoRemoteIpAddress IpAddress,
ntpAssoRefId OCTET STRING,
ntpAssoStratum OCTET STRING,
ntpAssoWhen OCTET STRING,
ntpAssoPoll OCTET STRING,
ntpAssoReach OCTET STRING,
ntpAssoDelay OCTET STRING,
ntpAssoOffset OCTET STRING,
ntpAssoDispersion OCTET STRING
}
ntpAssoRemoteIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the initiative peer or server."
::= { ntpAssoEntry 1 }
ntpAssoRefId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reference identifier of the peer or server."
::= { ntpAssoEntry 2 }
ntpAssoStratum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a integer indicating the stratum level
of the peer of server clock."
::= { ntpAssoEntry 3 }
ntpAssoWhen OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a round second clock whose value change
from 1 to 60."
::= { ntpAssoEntry 4 }
ntpAssoPoll OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval at which the local host polls the peer."
::= { ntpAssoEntry 5 }
ntpAssoReach OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a shift register of NTP which is used to
determine the reach abilityStatus of the peer."
::= { ntpAssoEntry 6 }
ntpAssoDelay OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a signed fixed-point number indicating
the total roundtrip delay to the primary reference source
at the root of the synchronization subnet, in seconds."
::= { ntpAssoEntry 7 }
ntpAssoOffset OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a signed, fixed-point number indicating the offset
of the peer clock or server clock relative to the local
clock, in seconds."
::= { ntpAssoEntry 8 }
ntpAssoDispersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a signed fixed-point number indicating
the maximum error of the peer or server clock
relative to the primary reference source."
::= { ntpAssoEntry 9 }
ntpUniPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpUniPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides ipaddress about the peer
with which the local NTP has associations.This
Table support create and destroy association
peer entry."
::= { ntpObject 12 }
ntpUniPeerEntry OBJECT-TYPE
SYNTAX NtpUniPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides ipaddress about the peer with which the local NTP
has associations.This table support create and destroy association peer
entry."
INDEX { ntpUnicastPeerIpAddress }
::= { ntpUniPeerTable 1 }
NtpUniPeerEntry ::=
SEQUENCE{
ntpUnicastPeerIpAddress
IpAddress,
ntpUnicastPeerKey
Integer32,
ntpUnicastPeerVersion
Integer32,
ntpUnicastPeerPrefer
INTEGER,
ntpUnicastPeerRowStatus
RowStatus
}
ntpUnicastPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the initiative peer."
::= { ntpUniPeerEntry 1 }
ntpUnicastPeerKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The peer use which authentication key pair."
::= { ntpUniPeerEntry 2 }
ntpUnicastPeerVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP verion of the peer."
::= { ntpUniPeerEntry 3 }
ntpUnicastPeerPrefer OBJECT-TYPE
SYNTAX INTEGER
{
prefer(1),
noPrefer(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the NTP peer is a preferred peer."
::= { ntpUniPeerEntry 4 }
ntpUnicastPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ntpUniPeerEntry 5 }
ntpUniServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpUniServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides ipaddress about the server with which the local NTP
has associations.This table support create and destroy association
server entry."
::= { ntpObject 13 }
ntpUniServerEntry OBJECT-TYPE
SYNTAX NtpUniServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides ipaddress about the server with which the local NTP
has associations.This table support create and destroy association
server entry."
INDEX { ntpUnicastServerIpAddress }
::= { ntpUniServerTable 1 }
NtpUniServerEntry ::=
SEQUENCE{
ntpUnicastServerIpAddress IpAddress,
ntpUnicastServerKey Integer32,
ntpUnicastServerVersion Integer32,
ntpUnicastServerPrefer INTEGER,
ntpUnicastServerRowStatus RowStatus
}
ntpUnicastServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the initiative server."
::= { ntpUniServerEntry 1 }
ntpUnicastServerKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The server use which authentication key pair."
::= { ntpUniServerEntry 2 }
ntpUnicastServerVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP verion of the server."
::= { ntpUniServerEntry 3 }
ntpUnicastServerPrefer OBJECT-TYPE
SYNTAX INTEGER
{
prefer(1),
noPrefer(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the NTP server is a preferred server."
::= { ntpUniServerEntry 4 }
ntpUnicastServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ntpUniServerEntry 5 }
ntpLocalRefClockStratum OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stratum of local reference clock.If the value is 16, disable local reference clock."
::= { ntpObject 14 }
ntpSysAuthenticate OBJECT-TYPE
SYNTAX INTEGER
{
noAuthenticate(0),
authenticate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a integer indicating that system support authentication."
::= { ntpObject 15 }
ntpBroadcastDelay OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The broadcast delay of ntp broadcast mode."
::= { ntpObject 16 }
--
-- NTP key
--
ntpKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table containing information of authentication key pair."
::= { ntpObject 17 }
ntpKeyEntry OBJECT-TYPE
SYNTAX NtpKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing information of authentication key pair."
INDEX { ntpKeyID }
::= { ntpKeyTable 1 }
NtpKeyEntry ::=
SEQUENCE {
ntpKeyID Integer32,
ntpKeyPair OCTET STRING,
ntpKeyRowStatus RowStatus
}
ntpKeyID OBJECT-TYPE
SYNTAX Integer32 (1..64000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NTP authentication key ID "
::= { ntpKeyEntry 1 }
ntpKeyPair OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP authentication key pair."
::= { ntpKeyEntry 2 }
ntpKeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ntpKeyEntry 3 }
--
-- NTP trust key
--
ntpTrustKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpTrustKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table containing information of authentication key pair that trusted."
::= { ntpObject 18 }
ntpTrustKeyEntry OBJECT-TYPE
SYNTAX NtpTrustKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing information of authentication key pair that trusted."
INDEX { ntpKeyID }
::= { ntpTrustKeyTable 1 }
NtpTrustKeyEntry ::=
SEQUENCE {
ntpTrustKeyID Integer32,
ntpTrustKeyTrust Integer32
}
ntpTrustKeyID OBJECT-TYPE
SYNTAX Integer32(1..64000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NTP authentication key ID "
::= { ntpTrustKeyEntry 1 }
ntpTrustKeyTrust OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP authentication key pair trust."
::= { ntpTrustKeyEntry 2 }
ntpInterfaceReload OBJECT-TYPE
SYNTAX INTEGER
{
reloadInterface(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reload interfaces."
::= { ntpObject 19 }
ntpTimeResetStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of time since reset."
::= { ntpObject 20 }
ntpRcvBufferStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of receive buffers."
::= { ntpObject 21 }
ntpFreeRcvBufferStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of free receive buffers."
::= { ntpObject 22 }
ntpUsedRcvBufferStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of used receive buffers."
::= { ntpObject 23 }
ntpLowWaterRefillStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of low water refills."
::= { ntpObject 24 }
ntpDroppedPktStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of dropped packets."
::= { ntpObject 25 }
ntpIgnoredPktStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of ignored packets."
::= { ntpObject 26 }
ntpReceivedPktStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of received packets."
::= { ntpObject 27 }
ntpPktSentStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of packets sent."
::= { ntpObject 28 }
ntpPktNotSentStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of packets not sent."
::= { ntpObject 29 }
ntpInterruptsHandledStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of interrupts handled."
::= { ntpObject 30 }
ntpReceivedByIntStatistic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP I/O statistics of received by int."
::= { ntpObject 31 }
--
-- NTP Access Control Entries(ACE) Table
--
ntpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table create the Access Control Entries (ACE) of a NTP server/peer."
::= { ntpObject 32 }
ntpAceEntry OBJECT-TYPE
SYNTAX NtpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing information of NTP ACE."
INDEX { ntpAceIndex }
::= { ntpAceTable 1 }
NtpAceEntry ::=
SEQUENCE {
ntpAceIndex Integer32,
ntpAceAddress OCTET STRING,
ntpAceMask OCTET STRING,
ntpAceVersion INTEGER,
ntpAceKod INTEGER,
ntpAceIgnore INTEGER,
ntpAceNoquery INTEGER,
ntpAceNomodify INTEGER,
ntpAceNotrap INTEGER,
ntpAceNoserver INTEGER,
ntpAceNopeer INTEGER,
ntpAceNotrust INTEGER,
ntpAceLimited INTEGER,
ntpAceRowStatus RowStatus
}
ntpAceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NTP ace list index."
::= { ntpAceEntry 1 }
ntpAceAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Ip address or hostname of NTP restrict peer."
::= { ntpAceEntry 2 }
ntpAceMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (7..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Mask of NTP restrict peer.
Default value is 255.255.255.255"
::= { ntpAceEntry 3 }
ntpAceVersion OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ignore these hosts if not the current NTP version.enable(1),disable(2)."
DEFVAL{ 2 }
::= { ntpAceEntry 4 }
ntpAceKod OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If access is denied, send a kiss-of-death packet."
DEFVAL{ 2 }
::= { ntpAceEntry 5 }
ntpAceIgnore OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ignore all packets from host that match this entry."
DEFVAL{ 2 }
::= { ntpAceEntry 6 }
ntpAceNoquery OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ignore all NTP mode 6 and 7 packets from the source.
Time service is not affected."
DEFVAL{ 2 }
::= { ntpAceEntry 7 }
ntpAceNomodify OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ignore all NTP mode 6 and 7 packets
which attempt to modify the stateof the server."
DEFVAL{ 2 }
::= { ntpAceEntry 8 }
ntpAceNotrap OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Decline to provide mode 6 control message
trap service to matching hosts."
DEFVAL{ 2 }
::= { ntpAceEntry 9 }
ntpAceNoserver OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ignore NTP packets whose mode is other than 6 or 7."
DEFVAL{ 2 }
::= { ntpAceEntry 10 }
ntpAceNopeer OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Provide stateless time service to polling hosts,
but do not allocate peer memory resources."
DEFVAL{ 2 }
::= { ntpAceEntry 11 }
ntpAceNotrust OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Treat these hosts normally in other respects,
but never use them as synchronization sources."
DEFVAL{ 2 }
::= { ntpAceEntry 12 }
ntpAceLimited OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"These hosts are subject to limitation of
number of clients from the same net."
DEFVAL{ 2 }
::= { ntpAceEntry 13 }
ntpAceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ntpAceEntry 20 }
--
-- NTP current restrict list
--
ntpRestrictTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpRestrictEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table containing information of NTP current restrict list."
::= { ntpObject 33 }
ntpRestrictEntry OBJECT-TYPE
SYNTAX NtpRestrictEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing information of NTP restrict."
INDEX { ntpRestrictIndex }
::= { ntpRestrictTable 1 }
NtpRestrictEntry ::=
SEQUENCE {
ntpRestrictIndex Integer32,
ntpRestrictAddress OCTET STRING,
ntpRestrictMask OCTET STRING,
ntpRestrictCount Integer32,
ntpRestrictFlag OCTET STRING
}
ntpRestrictIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NTP current restrict list index."
::= { ntpRestrictEntry 1 }
ntpRestrictAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP current restrict address."
::= { ntpRestrictEntry 2 }
ntpRestrictMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP current restrict mask."
::= { ntpRestrictEntry 3 }
ntpRestrictCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP current restrict count value."
::= { ntpRestrictEntry 4 }
ntpRestrictFlag OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP current restrict flags."
::= { ntpRestrictEntry 5 }
-- Sub Module: ACL
-- Rule action value
RuleAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of rule's action.
permit: The packet matching the rule will be permitted to forward.
deny: The packet matching the rule will be denied.
"
SYNTAX INTEGER
{
permit(1),
deny(2)
}
-- CounterClear value
CounterClear ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"cleared: Reset the value of the rule's counter.
nouse: 'nouse' will be returned when getting.
"
SYNTAX INTEGER
{
cleared(1),
nouse(2)
}
-- PortOp value
PortOp ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The operation type of TCP and UDP.
lt : Less than given port number.
eq : Equal to given port number.
gt : Greater than given port number.
-- neq : Not equal to given port number.
range : Between two port numbers.
"
SYNTAX INTEGER
{
eq(0),
-- neq(1),
gt(2),
lt(3),
range(4),
invalid(5)
}
-- Precedence value
PrecedenceValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of IP-packet's precedence.
<0-7> Value of precedence
routine Specify routine precedence(0)
priority Specify priority precedence(1)
immediate Specify immediate precedence(2)
flash Specify flash precedence(3)
flash-override Specify flash-override precedence(4)
critical Specify critical precedence(5)
internet Specify internetwork control precedence(6)
network Specify network control precedence(7) "
SYNTAX Integer32 (0..7|255)
-- DSCP value
DSCPValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of DSCP.
<0-64> Value of DSCP
af11 Specify Assured Forwarding 11 service(10)
af12 Specify Assured Forwarding 12 service(12)
af13 Specify Assured Forwarding 13 service(14)
af21 Specify Assured Forwarding 21 service(18)
af22 Specify Assured Forwarding 22 service(20)
af23 Specify Assured Forwarding 23 service(22)
af31 Specify Assured Forwarding 31 service(26)
af32 Specify Assured Forwarding 32 service(28)
af33 Specify Assured Forwarding 33 service(30)
af41 Specify Assured Forwarding 41 service(34)
af42 Specify Assured Forwarding 42 service(36)
af43 Specify Assured Forwarding 43 service(38)
be Specify Best Effort service(0)
cs1 Specify Class Selector 1 service(8)
cs2 Specify Class Selector 2 service(16)
cs3 Specify Class Selector 3 service(24)
cs4 Specify Class Selector 4 service(32)
cs5 Specify Class Selector 5 service(40)
cs6 Specify Class Selector 6 service(48)
cs7 Specify Class Selector 7 service(56)
ef Specify Expedited Forwarding service(46)
nouse Do not use this filter(64)
"
SYNTAX Integer32 (0..64)
--
-- nodes defined
--
aclData OBJECT IDENTIFIER ::= { acl 1 }
--
-- Node of aclGroupTable
--
aclGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the match-order of number-acl group."
::= { aclData 1 }
aclGroupEntry OBJECT-TYPE
SYNTAX AclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclGroupTable."
INDEX { aclGroupIndex }
::= { aclGroupTable 1 }
AclGroupEntry ::=
SEQUENCE
{
aclGroupIndex
Integer32,
aclGroupName
OCTET STRING,
aclGroupRuleNum
Unsigned32,
aclGroupRowStatus
RowStatus,
aclGroupDescription
OCTET STRING
}
aclGroupIndex OBJECT-TYPE
SYNTAX Integer32 (10001..80000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of acl group.
MAC type :10001..20000
IP Extend type :20001..30000
IP type :30001..40000
IPv6 type :40001..50000
IPv6 Extend type :50001..60000
MLPS type :60001..70000
MPLS Extend type :70001..80000."
::= { aclGroupEntry 1 }
aclGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of acl group. Range 0~20."
::= { aclGroupEntry 2 }
aclGroupRuleNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of rules in this acl group."
::= { aclGroupEntry 3 }
aclGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { aclGroupEntry 4 }
aclGroupDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The description of this acl group.Up to 100 characters.Range 0~100."
::= { aclGroupEntry 5 }
--
-- Nodes of aclMacRuleTable
--
aclMacRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclMacRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of MAC acl group.
If some objects of this table are not supported by some products,
these objects can't be created, changed and applied.
Default value of these objects will be returned when they are read.
"
::= { aclData 2 }
aclMacRuleEntry OBJECT-TYPE
SYNTAX AclMacRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC acl group information."
INDEX { aclMacGroupIndex, aclMacRuleIndex }
::= { aclMacRuleTable 1 }
AclMacRuleEntry ::=
SEQUENCE
{
aclMacGroupIndex
Integer32,
aclMacRuleIndex
Integer32,
aclMacAct
RuleAction,
aclMacSrcMac
MacAddress ,
aclMacSrcMacWild
MacAddress ,
aclMacDestMac
MacAddress ,
aclMacDestMacWild
MacAddress ,
aclMacProtocol
OCTET STRING,
aclMacProtocolWild
OCTET STRING,
aclMacType
Integer32,
aclMacVlanId
Integer32,
aclMacInnerVlanId
Integer32,
aclMacCos
Integer32,
aclMacInnerCos
Integer32,
aclMacTimeRangeName
OCTET STRING,
aclMacRowStatus
RowStatus
}
aclMacGroupIndex OBJECT-TYPE
SYNTAX Integer32 (10001..30000|50001..60000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of MAC-based acl group.Range is 10001~30000 and 50001~60000."
::= { aclMacRuleEntry 1 }
aclMacRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of MAC-based acl group. Range 1~131071."
::= { aclMacRuleEntry 2 }
aclMacAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of MAC acl rule.
(1) permit.
(2) deny."
::= { aclMacRuleEntry 3 }
aclMacSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC of MAC acl rule.
If you do not want to use this filter,
set this item with any valid value
and set aclMacSrcMacWild 'FFFF.FFFF.FFFF'."
::= { aclMacRuleEntry 4 }
aclMacSrcMacWild OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC wildcard of MAC acl rule.
If you do not want to use this filter,
set aclMacSrcMac with any valid value
and set this item 'FFFF.FFFF.FFFF'."
::= { aclMacRuleEntry 5 }
aclMacDestMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC of MAC acl rule.
If you do not want to use this filter,
set this item with any valid value
and set aclMacDestMacWild 'FFFF.FFFF.FFFF'."
::= { aclMacRuleEntry 6 }
aclMacDestMacWild OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC wildcard of MAC acl rule.
If you do not want to use this filter,
set aclMacDestMac with any valid value
and set this item 'FFFF.FFFF.FFFF'."
::= { aclMacRuleEntry 7 }
aclMacProtocol OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ether type in decimal/hexadecimal, ranging in <0x0-0xffff>.
(aclMacProtocol = 0, aclMacProtocolWild = 0xffff) means any protocols.
"
::= { aclMacRuleEntry 8 }
aclMacProtocolWild OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ether type wildcard in decimal/hexadecimal, ranging in <0x0-0xffff>,
reversely encoded.
(aclMacProtocol = 0, aclMacProtocolWild = 0xffff) means any protocols.
"
::= { aclMacRuleEntry 9 }
aclMacType OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The type of protocol
nouse(0)
eth2(1)
sap(2)
snap(3) "
::= { aclMacRuleEntry 10 }
aclMacVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan id of MAC acl rule.Range 0~4094.
nouse(0) "
::= { aclMacRuleEntry 11 }
aclMacInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The inner vlan id of MAC acl rule. Range 0~4094
nouse(0) "
::= { aclMacRuleEntry 12 }
aclMacCos OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Vlan priority of MAC acl rule.Range 0~8
nouse(8)."
::= { aclMacRuleEntry 13 }
aclMacInnerCos OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Inner vlan priority of MAC acl rule.Range 0~8.
nouse(8)."
::= { aclMacRuleEntry 14 }
aclMacTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of MAC acl rule.Range 0~20."
::= { aclMacRuleEntry 15 }
aclMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { aclMacRuleEntry 30 }
--
-- aclIpRuleTable
--
aclIpRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for ip acl group."
::= { aclData 3 }
aclIpRuleEntry OBJECT-TYPE
SYNTAX AclIpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclIpRuleTable."
INDEX { aclIpGroupIndex, aclIpRuleIndex }
::= { aclIpRuleTable 1 }
AclIpRuleEntry ::=
SEQUENCE {
aclIpGroupIndex
Integer32,
aclIpRuleIndex
Integer32,
aclIpAct
RuleAction,
aclIpProtocol
Integer32,
aclIpSrcIp
IpAddress,
aclIpSrcWild
IpAddress,
aclIpDestIp
IpAddress,
aclIpDestWild
IpAddress,
aclIpPrecedence
Integer32,
aclIpDscp
DSCPValue,
aclIpFragments
TruthValue,
aclIpRouted
TruthValue,
aclIpOptions
TruthValue,
aclIpTimeRangeName
OCTET STRING,
aclIpRowStatus
RowStatus
}
aclIpGroupIndex OBJECT-TYPE
SYNTAX Integer32 (20001..40000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of ip acl group. Range 20001~40000."
::= { aclIpRuleEntry 1 }
aclIpRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of ip acl rule.Range 1~131071."
::= { aclIpRuleEntry 2 }
aclIpAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of ip acl rule.
(1) permit.
(2) deny."
::= { aclIpRuleEntry 3 }
aclIpProtocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol-type of Ip acl group.
<0-255> Protocol number
Icmp Internet Control Message Protocol(1)
igmp Internet Group Management Protocol(2)
ospf OSPF routing protocol(89)
tcp Transmission Control Protocol (6)
udp User Datagram Protocol (17)
nouse Do not use this filter(256) "
::= { aclIpRuleEntry 4 }
aclIpSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address of ip acl group."
::= { aclIpRuleEntry 5 }
aclIpSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address wild of ip acl group."
::= { aclIpRuleEntry 6 }
aclIpDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address of ip acl group."
::= { aclIpRuleEntry 7 }
aclIpDestWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address wild of ip acl group."
::= { aclIpRuleEntry 8 }
aclIpPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of Precedence.8 means do not use this filter.Range 0~8.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIpDscp is setted."
::= { aclIpRuleEntry 9 }
aclIpDscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIpPrecedence is setted."
::= { aclIpRuleEntry 10 }
aclIpFragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet. True(1),False(2)."
::= { aclIpRuleEntry 11 }
aclIpRouted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclIpRuleEntry 12 }
aclIpOptions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching packet with ip option. True(1),False(2)."
::= { aclIpRuleEntry 13 }
aclIpTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of Ip acl rule.String length range 0~20."
::= { aclIpRuleEntry 14 }
aclIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { aclIpRuleEntry 16 }
--
-- aclTcpRuleTable
--
aclTcpRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclTcpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for tcp acl group."
::= { aclData 4 }
aclTcpRuleEntry OBJECT-TYPE
SYNTAX AclTcpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of hh3cAclTcpRuleTable."
INDEX { aclTcpGroupIndex, aclTcpRuleIndex }
::= { aclTcpRuleTable 1 }
AclTcpRuleEntry ::=
SEQUENCE {
aclTcpGroupIndex
Integer32,
aclTcpRuleIndex
Integer32,
aclTcpAct
RuleAction,
aclTcpSrcIp
IpAddress,
aclTcpSrcWild
IpAddress,
aclTcpDestIp
IpAddress,
aclTcpDestWild
IpAddress,
aclTcpPrecedence
Integer32,
aclTcpDscp
DSCPValue,
aclTcpFragments
TruthValue,
aclTcpRouted
TruthValue,
aclTcpOptions
TruthValue,
aclTcpSrcOp
PortOp,
aclTcpSrcPort1
Integer32,
aclTcpSrcPort2
Integer32,
aclTcpDestOp
PortOp,
aclTcpDestPort1
Integer32,
aclTcpDestPort2
Integer32,
aclTcpFlagOp
INTEGER,
aclTcpFlagUrg
TruthValue,
aclTcpFlagAck
TruthValue,
aclTcpFlagPsh
TruthValue,
aclTcpFlagRst
TruthValue,
aclTcpFlagSyn
TruthValue,
aclTcpFlagFin
TruthValue,
aclTcpTimeRangeName
OCTET STRING,
aclTcpRowStatus
RowStatus
}
aclTcpGroupIndex OBJECT-TYPE
SYNTAX Integer32 (20001..40000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of tcp acl group. Range 20001~40000."
::= { aclTcpRuleEntry 1 }
aclTcpRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of tcp acl group. Range 1~131071."
::= { aclTcpRuleEntry 2 }
aclTcpAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of tcp acl rule.
(1) permit.
(2) deny."
::= { aclTcpRuleEntry 3 }
aclTcpSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address of tcp acl group."
::= { aclTcpRuleEntry 4 }
aclTcpSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address wild of tcp acl group."
::= { aclTcpRuleEntry 5 }
aclTcpDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address of tcp acl group."
::= { aclTcpRuleEntry 6 }
aclTcpDestWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address wild of tcp acl group."
::= { aclTcpRuleEntry 7 }
aclTcpPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of Precedence.8 means do not use this filter.Range 0~8.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclTcpDscp is setted."
::= { aclTcpRuleEntry 8 }
aclTcpDscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclTcpPrecedence is setted."
::= { aclTcpRuleEntry 9 }
aclTcpFragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet. True(1),False(2).
This node can not be setted true for aclTcpSrcOp or aclTcpDestOp is setted."
::= { aclTcpRuleEntry 10 }
aclTcpRouted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclTcpRuleEntry 11 }
aclTcpOptions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching packet with ip option. True(1),False(2)."
::= { aclTcpRuleEntry 12 }
aclTcpSrcOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source port's operator of tcp acl group.
This node can not be setted if aclTcpFragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclTcpRuleEntry 13 }
aclTcpSrcPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port1. Range 0~65535. "
::= { aclTcpRuleEntry 14 }
aclTcpSrcPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port2. Range 0~65535."
::= { aclTcpRuleEntry 15 }
aclTcpDestOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination port's operator of tcp acl group.
This node can not be setted if aclTcpFragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclTcpRuleEntry 16 }
aclTcpDestPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port1. Range 0~65535."
::= { aclTcpRuleEntry 17 }
aclTcpDestPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port2. Range 0~65535."
::= { aclTcpRuleEntry 18 }
aclTcpFlagOp OBJECT-TYPE
SYNTAX INTEGER
{
matchAny(0),
matchAll(1),
invalid(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-flags' operator of tcp acl group.for example, established tcp packet with ack or rst flag setted, set this node matchAny(0) and set aclTcpFlagAck and aclTcpFlagRst can filter established tcp packet.
matchAny(0),
matchAll(1),
invalid(2)."
::= { aclTcpRuleEntry 19 }
aclTcpFlagUrg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-urg flag of tcp acl group. True(1),False(2).
TCP protocol URG Packet."
::= { aclTcpRuleEntry 20 }
aclTcpFlagAck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-ack flag of tcp acl group.
TCP protocol ACK Packet. True(1),False(2)."
::= { aclTcpRuleEntry 21 }
aclTcpFlagPsh OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-psh flag of tcp acl group. True(1),False(2).
TCP protocol PSH Packet."
::= { aclTcpRuleEntry 22 }
aclTcpFlagRst OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-rst flag of tcp acl group. True(1),False(2).
TCP protocol RST Packet."
::= { aclTcpRuleEntry 23 }
aclTcpFlagSyn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-syn flag of tcp acl group. True(1),False(2).
TCP protocol SYN Packet."
::= { aclTcpRuleEntry 24 }
aclTcpFlagFin OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-fin flag of tcp acl group. True(1),False(2).
TCP protocol FIN Packet."
::= { aclTcpRuleEntry 25 }
aclTcpTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of tcp acl rule."
::= { aclTcpRuleEntry 26 }
aclTcpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { aclTcpRuleEntry 28 }
--
-- aclUdpRuleTable
--
aclUdpRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclUdpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for udp acl group."
::= { aclData 5 }
aclUdpRuleEntry OBJECT-TYPE
SYNTAX AclUdpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclUdpRuleTable."
INDEX { aclUdpGroupIndex, aclUdpRuleIndex }
::= { aclUdpRuleTable 1 }
AclUdpRuleEntry ::=
SEQUENCE {
aclUdpGroupIndex
Integer32,
aclUdpRuleIndex
Integer32,
aclUdpAct
RuleAction,
aclUdpSrcIp
IpAddress,
aclUdpSrcWild
IpAddress,
aclUdpDestIp
IpAddress,
aclUdpDestWild
IpAddress,
aclUdpPrecedence
Integer32,
aclUdpDscp
DSCPValue,
aclUdpFragments
TruthValue,
aclUdpRouted
TruthValue,
aclUdpOptions
TruthValue,
aclUdpSrcOp
PortOp,
aclUdpSrcPort1
Integer32,
aclUdpSrcPort2
Integer32,
aclUdpDestOp
PortOp,
aclUdpDestPort1
Integer32,
aclUdpDestPort2
Integer32,
aclUdpTimeRangeName
OCTET STRING,
aclUdpRowStatus
RowStatus
}
aclUdpGroupIndex OBJECT-TYPE
SYNTAX Integer32 (20001..40000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of udp acl group. Range 20001~40000."
::= { aclUdpRuleEntry 1 }
aclUdpRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of udp acl group. Range 1~131071."
::= { aclUdpRuleEntry 2 }
aclUdpAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of udp acl rule.
(1) permit.
(2) deny"
::= { aclUdpRuleEntry 3 }
aclUdpSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address of udp acl group."
::= { aclUdpRuleEntry 4 }
aclUdpSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address wild of udp acl group."
::= { aclUdpRuleEntry 5 }
aclUdpDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address of udp acl group."
::= { aclUdpRuleEntry 6 }
aclUdpDestWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address wild of udp acl group."
::= { aclUdpRuleEntry 7 }
aclUdpPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of Precedence.8 means do not use this filter.Range 0~8.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclUdpDscp is setted."
::= { aclUdpRuleEntry 8 }
aclUdpDscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclUdpPrecedence is setted."
::= { aclUdpRuleEntry 9 }
aclUdpFragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet. True(1),False(2).
This node can not be setted true for aclUdpSrcOp or aclUdpDestOp is setted."
::= { aclUdpRuleEntry 10 }
aclUdpRouted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclUdpRuleEntry 11 }
aclUdpOptions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching packet with ip option. True(1),False(2)."
::= { aclUdpRuleEntry 12 }
aclUdpSrcOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source port's operator of udp acl group.
This node can not be setted if aclUdpFragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclUdpRuleEntry 13 }
aclUdpSrcPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port1. Range 0~65535."
::= { aclUdpRuleEntry 14 }
aclUdpSrcPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port2. Range 0~65535."
::= { aclUdpRuleEntry 15 }
aclUdpDestOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination port's operator of udp acl group.
This node can not be setted if aclUdpFragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclUdpRuleEntry 16 }
aclUdpDestPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port1. Range 0~65535."
::= { aclUdpRuleEntry 17 }
aclUdpDestPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port2. Range 0~65535."
::= { aclUdpRuleEntry 18 }
aclUdpTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of udp acl rule. Range 0~20."
::= { aclUdpRuleEntry 19 }
aclUdpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { aclUdpRuleEntry 21 }
--
-- aclIcmpRuleTable
--
aclIcmpRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIcmpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for icmp acl group."
::= { aclData 6 }
aclIcmpRuleEntry OBJECT-TYPE
SYNTAX AclIcmpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclIcmpRuleTable."
INDEX { aclIcmpGroupIndex, aclIcmpRuleIndex }
::= { aclIcmpRuleTable 1 }
AclIcmpRuleEntry ::=
SEQUENCE {
aclIcmpGroupIndex
Integer32,
aclIcmpRuleIndex
Integer32,
aclIcmpAct
RuleAction,
aclIcmpSrcIp
IpAddress,
aclIcmpSrcWild
IpAddress,
aclIcmpDestIp
IpAddress,
aclIcmpDestWild
IpAddress,
aclIcmpPrecedence
Integer32,
aclIcmpDscp
DSCPValue,
aclIcmpFragments
TruthValue,
aclIcmpRouted
TruthValue,
aclIcmpOptions
TruthValue,
aclIcmpType
Integer32,
aclIcmpCode
Integer32,
aclIcmpTimeRangeName
OCTET STRING,
aclIcmpRowStatus
RowStatus
}
aclIcmpGroupIndex OBJECT-TYPE
SYNTAX Integer32 (20001..40000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of icmp acl group. Range 20001~40000."
::= { aclIcmpRuleEntry 1 }
aclIcmpRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of icmp acl group. Range 1~131071."
::= { aclIcmpRuleEntry 2 }
aclIcmpAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of icmp acl rule.
(1) permit.
(2) deny"
::= { aclIcmpRuleEntry 3 }
aclIcmpSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address of icmp acl group."
::= { aclIcmpRuleEntry 4 }
aclIcmpSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address wild of icmp acl group."
::= { aclIcmpRuleEntry 5 }
aclIcmpDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address of icmp acl group."
::= { aclIcmpRuleEntry 6 }
aclIcmpDestWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address wild of icmp acl group."
::= { aclIcmpRuleEntry 7 }
aclIcmpPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of Precedence.8 means do not use this filter.Range 0~8.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIcmpDscp is setted."
::= { aclIcmpRuleEntry 8 }
aclIcmpDscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIcmpPrecedence is setted."
::= { aclIcmpRuleEntry 9 }
aclIcmpFragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet.
This node can not be setted true if aclIcmpType is setted. True(1),False(2)."
::= { aclIcmpRuleEntry 10 }
aclIcmpRouted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclIcmpRuleEntry 11 }
aclIcmpOptions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching packet with ip option. True(1),False(2)."
::= { aclIcmpRuleEntry 12 }
aclIcmpType OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of ICMP packet.
INTEGER<0-256> ICMP type
echo Type=8, Code=0
echo-reply Type=0, Code=0
fragmentneed-DFset Type=3, Code=4
host-redirect Type=5, Code=1
host-tos-redirect Type=5, Code=3
host-unreachable Type=3, Code=1
information-reply Type=16, Code=0
information-request Type=15, Code=0
net-redirect Type=5, Code=0
net-tos-redirect Type=5, Code=2
net-unreachable Type=3, Code=0
parameter-problem Type=12, Code=0
port-unreachable Type=3, Code=3
protocol-unreachable Type=3, Code=2
reassembly-timeout Type=11, Code=1
source-quench Type=4, Code=0
source-route-failed Type=3, Code=5
timestamp-reply Type=14, Code=0
timestamp-request Type=13, Code=0
ttl-exceeded Type=11, Code=0
nouse 256
This node can not be setted if aclIcmpFragments is true."
::= { aclIcmpRuleEntry 13 }
aclIcmpCode OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The code of ICMP packet.INTEGER<0-256>
echo Type=8, Code=0
echo-reply Type=0, Code=0
fragmentneed-DFset Type=3, Code=4
host-redirect Type=5, Code=1
host-tos-redirect Type=5, Code=3
host-unreachable Type=3, Code=1
information-reply Type=16, Code=0
information-request Type=15, Code=0
net-redirect Type=5, Code=0
net-tos-redirect Type=5, Code=2
net-unreachable Type=3, Code=0
parameter-problem Type=12, Code=0
port-unreachable Type=3, Code=3
protocol-unreachable Type=3, Code=2
reassembly-timeout Type=11, Code=1
source-quench Type=4, Code=0
source-route-failed Type=3, Code=5
timestamp-reply Type=14, Code=0
timestamp-request Type=13, Code=0
ttl-exceeded Type=11, Code=0
nouse 256
This node can not be setted if aclIcmpType is not setted."
::= { aclIcmpRuleEntry 14 }
aclIcmpTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of icmp acl rule. Range 0~20."
::= { aclIcmpRuleEntry 15 }
aclIcmpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { aclIcmpRuleEntry 17 }
--
-- aclIgmpRuleTable
--
aclIgmpRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIgmpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for igmp acl group."
::= { aclData 7 }
aclIgmpRuleEntry OBJECT-TYPE
SYNTAX AclIgmpRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclIgmpRuleTable."
INDEX { aclIgmpGroupIndex, aclIgmpRuleIndex }
::= { aclIgmpRuleTable 1 }
AclIgmpRuleEntry ::=
SEQUENCE {
aclIgmpGroupIndex
Integer32,
aclIgmpRuleIndex
Integer32,
aclIgmpAct
RuleAction,
aclIgmpSrcIp
IpAddress,
aclIgmpSrcWild
IpAddress,
aclIgmpDestIp
IpAddress,
aclIgmpDestWild
IpAddress,
aclIgmpPrecedence
Integer32,
aclIgmpDscp
DSCPValue,
aclIgmpFragments
TruthValue,
aclIgmpRouted
TruthValue,
aclIgmpOptions
TruthValue,
aclIgmpType
INTEGER,
aclIgmpTimeRangeName
OCTET STRING,
aclIgmpRowStatus
RowStatus
}
aclIgmpGroupIndex OBJECT-TYPE
SYNTAX Integer32 (20001..40000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of igmp acl group. Range 20001~40000."
::= { aclIgmpRuleEntry 1 }
aclIgmpRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of igmp acl group.Range 1~131071."
::= { aclIgmpRuleEntry 2 }
aclIgmpAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of igmp acl rule.
(1) permit.
(2) deny"
::= { aclIgmpRuleEntry 3 }
aclIgmpSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address of igmp acl group."
::= { aclIgmpRuleEntry 4 }
aclIgmpSrcWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IP-address wild of igmp acl group."
::= { aclIgmpRuleEntry 5 }
aclIgmpDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address of igmp acl group."
::= { aclIgmpRuleEntry 6 }
aclIgmpDestWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP-address wild of igmp acl group."
::= { aclIgmpRuleEntry 7 }
aclIgmpPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of Precedence.8 means do not use this filter.Range 0~8.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIgmpDscp is setted."
::= { aclIgmpRuleEntry 8 }
aclIgmpDscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.
DSCP and Precedence both use IP TOS segment.This node can not be setted for aclIgmpPrecedence is setted."
::= { aclIgmpRuleEntry 9 }
aclIgmpFragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet.
This node can not be setted true if aclIgmpType is setted. True(1),False(2)."
::= { aclIgmpRuleEntry 10 }
aclIgmpRouted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclIgmpRuleEntry 11 }
aclIgmpOptions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching packet with ip option.True(1),False(2)."
::= { aclIgmpRuleEntry 12 }
aclIgmpType OBJECT-TYPE
SYNTAX INTEGER
{
precedence(0),
hostQuery(17),
hostReport(18),
dvmrp(19),
pim(20),
trace(21),
v2Report(22),
v2Leave(23),
mtraceResponse(30),
mtrace(31),
v3Report(34),
invalid(256)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of ICMP packet.
0 precedence
17 host query
18 host report
19 dvmrp
20 pim
21 trace
22 v2 report
23 v2 leave
30 mtrace response
31 mtrace
34 v3 report
256 nouse
This node can not be setted if aclIgmpFragments is true."
::= { aclIgmpRuleEntry 13 }
aclIgmpTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of igmp acl rule.Range 0~20."
::= { aclIgmpRuleEntry 14 }
aclIgmpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { aclIgmpRuleEntry 16 }
--
-- Nodes of aclMplsMacRuleTable
--
aclMplsMacRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclMplsMacRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of MPLS MAC acl group.
If some objects of this table are not supported by some products,
these objects can't be created, changed and applied.
Default value of these objects will be returned when they are read.
"
::= { aclData 8 }
aclMplsMacRuleEntry OBJECT-TYPE
SYNTAX AclMplsMacRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS MAC acl group information."
INDEX { aclMplsMacGroupIndex, aclMplsMacRuleIndex }
::= { aclMplsMacRuleTable 1 }
AclMplsMacRuleEntry ::=
SEQUENCE
{
aclMplsMacGroupIndex
Integer32,
aclMplsMacRuleIndex
Integer32,
aclMplsMacAct
RuleAction,
aclMplsMacSrcMac
MacAddress ,
aclMplsMacSrcMacWild
MacAddress ,
aclMplsMacDestMac
MacAddress ,
aclMplsMacDestMacWild
MacAddress ,
aclMplsMacType
Integer32,
aclMplsMacVlanId
Integer32,
aclMplsMacInnerVlanId
Integer32,
aclMplsMacCos
Integer32,
aclMplsMacInnerCos
Integer32,
aclMplsMacTimeRangeName
OCTET STRING,
aclMplsMacRowStatus
RowStatus
}
aclMplsMacGroupIndex OBJECT-TYPE
SYNTAX Integer32 (70001..80000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of MPLS MAC-based acl group. Range 70001 ~ 80000."
::= { aclMplsMacRuleEntry 1 }
aclMplsMacRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of MPLS MAC-based acl group. Range 1~131071."
::= { aclMplsMacRuleEntry 2 }
aclMplsMacAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of MPLS MAC acl rule.
(1) permit.
(2) deny."
::= { aclMplsMacRuleEntry 3 }
aclMplsMacSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC of MPLS MAC acl rule."
::= { aclMplsMacRuleEntry 4 }
aclMplsMacSrcMacWild OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source MAC wildcard of MPLS MAC acl rule."
::= { aclMplsMacRuleEntry 5 }
aclMplsMacDestMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC of MAC acl rule.
If you do not want to use this filter,
set this item and aclMacDestMacWild 'FF:FF:FF:FF:FF:FF'."
::= { aclMplsMacRuleEntry 6 }
aclMplsMacDestMacWild OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination MAC wildcard of MAC acl rule. If you do not want to use
this filter, set this item and aclMacDestMac 'FF:FF:FF:FF:FF:FF'."
::= { aclMplsMacRuleEntry 7 }
aclMplsMacType OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of protocol
nouse(0)
eth2(1)
sap(2)
snap(3) "
::= { aclMplsMacRuleEntry 8 }
aclMplsMacVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan id of MAC acl rule.Range 0~4094.
nouse(0) "
::= { aclMplsMacRuleEntry 9 }
aclMplsMacInnerVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The inner vlan id of MAC acl rule.
nouse(0) "
::= { aclMplsMacRuleEntry 10 }
aclMplsMacCos OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Vlan priority of MAC acl rule.Range 0~8
nouse(8)."
::= { aclMplsMacRuleEntry 11 }
aclMplsMacInnerCos OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Inner vlan priority of MAC acl rule.
nouse(8)."
::= { aclMplsMacRuleEntry 12 }
aclMplsMacTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of MAC acl rule."
::= { aclMplsMacRuleEntry 13 }
aclMplsMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.Now only realize CreateAndGo and Destroy and Active."
::= { aclMplsMacRuleEntry 20 }
--
-- aclMplsLabelRuleTable
--
aclMplsLabelRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclMplsLabelRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for Mpls Label acl group."
::= { aclData 9 }
aclMplsLabelRuleEntry OBJECT-TYPE
SYNTAX AclMplsLabelRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of acl Mpls Label RuleTable."
INDEX { aclMplsLabelGroupIndex, aclMplsLabelRuleIndex }
::= { aclMplsLabelRuleTable 1 }
AclMplsLabelRuleEntry ::=
SEQUENCE {
aclMplsLabelGroupIndex
Integer32,
aclMplsLabelRuleIndex
Integer32,
aclMplsLabelAct
RuleAction,
aclMplsLabelLayer
Integer32,
aclMplsLabel1Value
Integer32,
aclMplsLabel1Wild
OCTET STRING,
aclMplsLabel1Exp
Integer32,
aclMplsLabel1Ttl
Integer32,
aclMplsLabel2Value
Integer32,
aclMplsLabel2Wild
OCTET STRING,
aclMplsLabel2Exp
Integer32,
aclMplsLabel2Ttl
Integer32,
aclMplsLabel3Value
Integer32,
aclMplsLabel3Wild
OCTET STRING,
aclMplsLabel3Exp
Integer32,
aclMplsLabel3Ttl
Integer32,
aclMplsLabel4Value
Integer32,
aclMplsLabel4Wild
OCTET STRING,
aclMplsLabel4Exp
Integer32,
aclMplsLabel4Ttl
Integer32,
aclMplsLabelSkBottom
TruthValue,
aclMplsLabelTimeRangeName
OCTET STRING,
aclMplsLabelRowStatus
RowStatus
}
aclMplsLabelGroupIndex OBJECT-TYPE
SYNTAX Integer32 (60001..80000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of MplsLabel acl group. Range 60001~80000."
::= { aclMplsLabelRuleEntry 1 }
aclMplsLabelRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of MplsLabel acl rule.Range 1~131071."
::= { aclMplsLabelRuleEntry 2 }
aclMplsLabelAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of MplsLabel acl rule.
(1) permit.
(2) deny."
::= { aclMplsLabelRuleEntry 3 }
aclMplsLabelLayer OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The layer number of MPLS labels.Range is <1-4>.
Set 1 means match MPLS packets with more than
(or equal to) one layer MPLS label.
Set 2 means match MPLS packets with more than
(or equal to) two layer MPLS label.
Set 3 means match MPLS packets with more than
(or equal to) three layer MPLS label.
Set 4 means match MPLS packets with more than
(or equal to) four layer MPLS label."
::= { aclMplsLabelRuleEntry 4 }
aclMplsLabel1Value OBJECT-TYPE
SYNTAX Integer32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mpls label1 value in in decimal system.
Range is 0~1048575.Default value is 0."
::= { aclMplsLabelRuleEntry 5 }
aclMplsLabel1Wild OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..5))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS label wildcard in hexadecimal system.
Range is string 0~fffff.
Default wild value is fffff, means any."
::= { aclMplsLabelRuleEntry 6 }
aclMplsLabel1Exp OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The exp value of the MPLS label.Range of exp is <0-7>.
8 means do not use.Default value is 8."
::= { aclMplsLabelRuleEntry 7 }
aclMplsLabel1Ttl OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ttl value of the MPLS label.Range of ttl is <0-255>.
256 means do not use.Default value is 256."
::= { aclMplsLabelRuleEntry 8 }
aclMplsLabel2Value OBJECT-TYPE
SYNTAX Integer32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mpls label value in in decimal system.
Range is 0~1048575.Default value is 0."
::= { aclMplsLabelRuleEntry 9 }
aclMplsLabel2Wild OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..5))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS label wildcard in hexadecimal system.
Range is string 0~fffff.
Defalut wild value is fffff, means any."
::= { aclMplsLabelRuleEntry 10 }
aclMplsLabel2Exp OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The exp value of the MPLS label.Range of exp is <0-7>.
8 means do not use.Default value is 8."
::= { aclMplsLabelRuleEntry 11 }
aclMplsLabel2Ttl OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ttl value of the MPLS label.Range of ttl is <0-255>.
256 means do not use.Default value is 256."
::= { aclMplsLabelRuleEntry 12 }
aclMplsLabel3Value OBJECT-TYPE
SYNTAX Integer32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mpls label value in in decimal system.
Range is 0~1048575.Default value is 0."
::= { aclMplsLabelRuleEntry 13 }
aclMplsLabel3Wild OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..5))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS label wildcard in hexadecimal system.
Range is string 0~fffff.
Default wild value is fffff, means any."
::= { aclMplsLabelRuleEntry 14 }
aclMplsLabel3Exp OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The exp value of the MPLS label.Range of exp is <0-7>.
8 means do not use.Default value is 8."
::= { aclMplsLabelRuleEntry 15 }
aclMplsLabel3Ttl OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ttl value of the MPLS label.Range of ttl is <0-255>.
256 means do not use.Default value is 256."
::= { aclMplsLabelRuleEntry 16 }
aclMplsLabel4Value OBJECT-TYPE
SYNTAX Integer32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mpls label value in in decimal system.
Range is 0~1048575.Default value is 0."
::= { aclMplsLabelRuleEntry 17 }
aclMplsLabel4Wild OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..5))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPLS label wildcard in hexadecimal system.
Range is string 0~fffff.
Default wild value is fffff, means any."
::= { aclMplsLabelRuleEntry 18 }
aclMplsLabel4Exp OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The exp value of the MPLS label.Range of exp is <0-7>.
8 means do not use.Default value is 8."
::= { aclMplsLabelRuleEntry 19 }
aclMplsLabel4Ttl OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ttl value of the MPLS label.Range of ttl is <0-255>.
256 means do not use.Default value is 256."
::= { aclMplsLabelRuleEntry 20 }
aclMplsLabelSkBottom OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set whether the topmost label as bottom of label stack.
True(1), means matching MPLS packets with
label layer num equal to aclMplsLabelLayer.
False(2), means matching MPLS packets with
label layer num more than aclMplsLabelLayer.
Default value is False."
::= { aclMplsLabelRuleEntry 21 }
aclMplsLabelTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of used by the MPLS filter rule."
::= { aclMplsLabelRuleEntry 22 }
aclMplsLabelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { aclMplsLabelRuleEntry 25 }
--
-- aclIpv6RuleTable
--
aclIpv6RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIpv6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for ipv6 acl group."
::= { aclData 10 }
aclIpv6RuleEntry OBJECT-TYPE
SYNTAX AclIpv6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclIpv6RuleTable."
INDEX { aclIpv6GroupIndex, aclIpv6RuleIndex }
::= { aclIpv6RuleTable 1 }
AclIpv6RuleEntry ::=
SEQUENCE {
aclIpv6GroupIndex
Integer32,
aclIpv6RuleIndex
Integer32,
aclIpv6Act
RuleAction,
aclIpv6Protocol
Integer32,
aclIpv6SrcIpv6
OCTET STRING,
aclIpv6SrcPrefixLen
Integer32,
aclIpv6DestIpv6
OCTET STRING,
aclIpv6DestPrefixLen
Integer32,
aclIpv6FlowLabel
Integer32,
aclIpv6Dscp
DSCPValue,
aclIpv6Fragments
TruthValue,
aclIpv6Routed
TruthValue,
aclIpv6Options
TruthValue,
aclIpv6TimeRangeName
OCTET STRING,
aclIpv6RowStatus
RowStatus
}
aclIpv6GroupIndex OBJECT-TYPE
SYNTAX Integer32 (40001..60000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of ipv6 acl group. Range 40001~60000."
::= { aclIpv6RuleEntry 1 }
aclIpv6RuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of ipv6 acl rule.Range 1~131071."
::= { aclIpv6RuleEntry 2 }
aclIpv6Act OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of ipv6 acl rule.
(1) permit.
(2) deny."
::= { aclIpv6RuleEntry 3 }
aclIpv6Protocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol-type of Ipv6 acl group.
<0-255> Protocol number
Icmpv6 Internet Control Message Protocol(58)
ospf OSPF routing protocol(89)
tcp Transmission Control Protocol (6)
udp User Datagram Protocol (17)
nouse Do not use this filter(256)"
::= { aclIpv6RuleEntry 4 }
aclIpv6SrcIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IPv6-address of ipv6 acl group."
::= { aclIpv6RuleEntry 5 }
aclIpv6SrcPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IPv6-address prefix length of ipv6 acl group.Range 0~128"
::= { aclIpv6RuleEntry 6 }
aclIpv6DestIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address of ipv6 acl group."
::= { aclIpv6RuleEntry 7 }
aclIpv6DestPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address prefix length of ipv6 acl group.Range 0~128"
::= { aclIpv6RuleEntry 8 }
aclIpv6FlowLabel OBJECT-TYPE
SYNTAX Integer32 (0..1048576)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576."
::= { aclIpv6RuleEntry 9 }
aclIpv6Dscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.Range 0~64."
::= { aclIpv6RuleEntry 10 }
aclIpv6Fragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet. True(1),False(2)."
::= { aclIpv6RuleEntry 11 }
aclIpv6Routed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclIpv6RuleEntry 12 }
aclIpv6Options OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The flag of matching packet with ipv6 option. True(1),False(2)."
::= { aclIpv6RuleEntry 13 }
aclIpv6TimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of Ipv6 acl rule.String length range 0~20."
::= { aclIpv6RuleEntry 14 }
aclIpv6RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { aclIpv6RuleEntry 16 }
--
-- aclTcp6RuleTable
--
aclTcp6RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclTcp6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for tcp6 acl group."
::= { aclData 11 }
aclTcp6RuleEntry OBJECT-TYPE
SYNTAX AclTcp6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclTcp6RuleTable."
INDEX { aclTcp6GroupIndex, aclTcp6RuleIndex }
::= { aclTcp6RuleTable 1 }
AclTcp6RuleEntry ::=
SEQUENCE {
aclTcp6GroupIndex
Integer32,
aclTcp6RuleIndex
Integer32,
aclTcp6Act
RuleAction,
aclTcp6SrcIpv6
OCTET STRING,
aclTcp6SrcPrefixLen
Integer32,
aclTcp6DestIpv6
OCTET STRING,
aclTcp6DestPrefixLen
Integer32,
aclTcp6FlowLabel
Integer32,
aclTcp6Dscp
DSCPValue,
aclTcp6Fragments
TruthValue,
aclTcp6Routed
TruthValue,
aclTcp6Options
TruthValue,
aclTcp6SrcOp
PortOp,
aclTcp6SrcPort1
Integer32,
aclTcp6SrcPort2
Integer32,
aclTcp6DestOp
PortOp,
aclTcp6DestPort1
Integer32,
aclTcp6DestPort2
Integer32,
aclTcp6FlagOp
INTEGER,
aclTcp6FlagUrg
TruthValue,
aclTcp6FlagAck
TruthValue,
aclTcp6FlagPsh
TruthValue,
aclTcp6FlagRst
TruthValue,
aclTcp6FlagSyn
TruthValue,
aclTcp6FlagFin
TruthValue,
aclTcp6TimeRangeName
OCTET STRING,
aclTcp6RowStatus
RowStatus
}
aclTcp6GroupIndex OBJECT-TYPE
SYNTAX Integer32 (40001..60000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of tcp6 acl group. Range 40001~60000."
::= { aclTcp6RuleEntry 1 }
aclTcp6RuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of tcp6 acl group. Range 1~131071."
::= { aclTcp6RuleEntry 2 }
aclTcp6Act OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of tcp6 acl rule.
(1) permit.
(2) deny."
::= { aclTcp6RuleEntry 3 }
aclTcp6SrcIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IPv6-address of tcp6 acl group."
::= { aclTcp6RuleEntry 4 }
aclTcp6SrcPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IPv6-address prefix length of tcp6 acl group.Range 0~128"
::= { aclTcp6RuleEntry 5 }
aclTcp6DestIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address of tcp6 acl group."
::= { aclTcp6RuleEntry 6 }
aclTcp6DestPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address prefix length of tcp6 acl group.Range 0~128"
::= { aclTcp6RuleEntry 7 }
aclTcp6FlowLabel OBJECT-TYPE
SYNTAX Integer32 (0..1048576)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576."
::= { aclTcp6RuleEntry 8 }
aclTcp6Dscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.Range 0~64."
::= { aclTcp6RuleEntry 9 }
aclTcp6Fragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet. True(1),False(2).
This node can not be setted true for aclTcp6SrcOp or aclTcp6DestOp is setted."
::= { aclTcp6RuleEntry 10 }
aclTcp6Routed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclTcp6RuleEntry 11 }
aclTcp6Options OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The flag of matching packet with ipv6 option. True(1),False(2)."
::= { aclTcp6RuleEntry 12 }
aclTcp6SrcOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source port's operator of tcp6 acl group.
This node can not be setted if aclTcp6Fragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclTcp6RuleEntry 13 }
aclTcp6SrcPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port1. Range 0~65535. "
::= { aclTcp6RuleEntry 14 }
aclTcp6SrcPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port2. Range 0~65535."
::= { aclTcp6RuleEntry 15 }
aclTcp6DestOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination port's operator of tcp6 acl group.
This node can not be setted if aclTcp6Fragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclTcp6RuleEntry 16 }
aclTcp6DestPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port1. Range 0~65535."
::= { aclTcp6RuleEntry 17 }
aclTcp6DestPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port2. Range 0~65535."
::= { aclTcp6RuleEntry 18 }
aclTcp6FlagOp OBJECT-TYPE
SYNTAX INTEGER
{
matchAny(0),
matchAll(1),
invalid(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-flags' operator of tcp6 acl group.
for example, established tcp packet with ack or rst flag setted,
set this node matchAny(0) and set aclTcp6FlagAck and aclTcp6FlagRst
can filter established tcp packet.
matchAny(0),
matchAll(1),
invalid(2)."
::= { aclTcp6RuleEntry 19 }
aclTcp6FlagUrg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-urg flag of tcp6 acl group. True(1),False(2).
TCP protocol URG Packet."
::= { aclTcp6RuleEntry 20 }
aclTcp6FlagAck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-ack flag of tcp6 acl group.
TCP protocol ACK Packet. True(1),False(2)."
::= { aclTcp6RuleEntry 21 }
aclTcp6FlagPsh OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-psh flag of tcp6 acl group. True(1),False(2).
TCP protocol PSH Packet."
::= { aclTcp6RuleEntry 22 }
aclTcp6FlagRst OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-rst flag of tcp6 acl group. True(1),False(2).
TCP protocol RST Packet."
::= { aclTcp6RuleEntry 23 }
aclTcp6FlagSyn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-syn flag of tcp6 acl group. True(1),False(2).
TCP protocol SYN Packet."
::= { aclTcp6RuleEntry 24 }
aclTcp6FlagFin OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tcp-fin flag of tcp6 acl group. True(1),False(2).
TCP protocol FIN Packet."
::= { aclTcp6RuleEntry 25 }
aclTcp6TimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of tcp6 acl rule."
::= { aclTcp6RuleEntry 26 }
aclTcp6RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { aclTcp6RuleEntry 28 }
--
-- aclUdp6RuleTable
--
aclUdp6RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclUdp6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for udp6 acl group."
::= { aclData 12 }
aclUdp6RuleEntry OBJECT-TYPE
SYNTAX AclUdp6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclUdp6RuleTable."
INDEX { aclUdp6GroupIndex, aclUdp6RuleIndex }
::= { aclUdp6RuleTable 1 }
AclUdp6RuleEntry ::=
SEQUENCE {
aclUdp6GroupIndex
Integer32,
aclUdp6RuleIndex
Integer32,
aclUdp6Act
RuleAction,
aclUdp6SrcIpv6
OCTET STRING,
aclUdp6SrcPrefixLen
Integer32,
aclUdp6DestIpv6
OCTET STRING,
aclUdp6DestPrefixLen
Integer32,
aclUdp6FlowLabel
Integer32,
aclUdp6Dscp
DSCPValue,
aclUdp6Fragments
TruthValue,
aclUdp6Routed
TruthValue,
aclUdp6Options
TruthValue,
aclUdp6SrcOp
PortOp,
aclUdp6SrcPort1
Integer32,
aclUdp6SrcPort2
Integer32,
aclUdp6DestOp
PortOp,
aclUdp6DestPort1
Integer32,
aclUdp6DestPort2
Integer32,
aclUdp6TimeRangeName
OCTET STRING,
aclUdp6RowStatus
RowStatus
}
aclUdp6GroupIndex OBJECT-TYPE
SYNTAX Integer32 (40001..60000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of udp6 acl group. Range 40001~60000."
::= { aclUdp6RuleEntry 1 }
aclUdp6RuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of udp6 acl group. Range 1~131071."
::= { aclUdp6RuleEntry 2 }
aclUdp6Act OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of udp6 acl rule.
(1) permit.
(2) deny"
::= { aclUdp6RuleEntry 3 }
aclUdp6SrcIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IPv6-address of udp6 acl group."
::= { aclUdp6RuleEntry 4 }
aclUdp6SrcPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IPv6-address prefix length of udp6 acl group.Range 0~128"
::= { aclUdp6RuleEntry 5 }
aclUdp6DestIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address of udp6 acl group."
::= { aclUdp6RuleEntry 6 }
aclUdp6DestPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address prefix length of udp6 acl group.Range 0~128"
::= { aclUdp6RuleEntry 7 }
aclUdp6FlowLabel OBJECT-TYPE
SYNTAX Integer32 (0..1048576)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576."
::= { aclUdp6RuleEntry 8 }
aclUdp6Dscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.Range 0~64."
::= { aclUdp6RuleEntry 9 }
aclUdp6Fragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet. True(1),False(2).
This node can not be setted true for aclUdp6SrcOp or aclUdp6DestOp is setted."
::= { aclUdp6RuleEntry 10 }
aclUdp6Routed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclUdp6RuleEntry 11 }
aclUdp6Options OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The flag of matching packet with ipv6 option. True(1),False(2)."
::= { aclUdp6RuleEntry 12 }
aclUdp6SrcOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source port's operator of udp6 acl group.
This node can not be setted if aclUdp6Fragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclUdp6RuleEntry 13 }
aclUdp6SrcPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port1. Range 0~65535."
::= { aclUdp6RuleEntry 14 }
aclUdp6SrcPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer source port2. Range 0~65535."
::= { aclUdp6RuleEntry 15 }
aclUdp6DestOp OBJECT-TYPE
SYNTAX PortOp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination port's operator of udp6 acl group.
This node can not be setted if aclUdp6Fragments is true.
eq(0),
gt(2),
lt(3),
range(4),
invalid(5)"
::= { aclUdp6RuleEntry 16 }
aclUdp6DestPort1 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port1. Range 0~65535."
::= { aclUdp6RuleEntry 17 }
aclUdp6DestPort2 OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth layer destination port2. Range 0~65535."
::= { aclUdp6RuleEntry 18 }
aclUdp6TimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of udp6 acl rule. Range 0~20."
::= { aclUdp6RuleEntry 19 }
aclUdp6RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { aclUdp6RuleEntry 21 }
--
-- aclIcmp6RuleTable
--
aclIcmp6RuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclIcmp6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the rule for icmp6 acl group."
::= { aclData 13 }
aclIcmp6RuleEntry OBJECT-TYPE
SYNTAX AclIcmp6RuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of aclIcmp6RuleTable."
INDEX { aclIcmp6GroupIndex, aclIcmp6RuleIndex }
::= { aclIcmp6RuleTable 1 }
AclIcmp6RuleEntry ::=
SEQUENCE {
aclIcmp6GroupIndex
Integer32,
aclIcmp6RuleIndex
Integer32,
aclIcmp6Act
RuleAction,
aclIcmp6SrcIpv6
OCTET STRING,
aclIcmp6SrcPrefixLen
Integer32,
aclIcmp6DestIpv6
OCTET STRING,
aclIcmp6DestPrefixLen
Integer32,
aclIcmp6FlowLabel
Integer32,
aclIcmp6Dscp
DSCPValue,
aclIcmp6Fragments
TruthValue,
aclIcmp6Routed
TruthValue,
aclIcmp6Options
TruthValue,
aclIcmp6Type
Integer32,
aclIcmp6Code
Integer32,
aclIcmp6TimeRangeName
OCTET STRING,
aclIcmp6RowStatus
RowStatus
}
aclIcmp6GroupIndex OBJECT-TYPE
SYNTAX Integer32 (40001..60000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of icmp6 acl group. Range 40001~60000."
::= { aclIcmp6RuleEntry 1 }
aclIcmp6RuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of icmp6 acl group. Range 1~131071."
::= { aclIcmp6RuleEntry 2 }
aclIcmp6Act OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of icmp6 acl rule.
(1) permit.
(2) deny"
::= { aclIcmp6RuleEntry 3 }
aclIcmp6SrcIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IPv6-address of icmp6 acl group."
::= { aclIcmp6RuleEntry 4 }
aclIcmp6SrcPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Source IPv6-address prefix length of icmp6 acl group.Range 0~128"
::= { aclIcmp6RuleEntry 5 }
aclIcmp6DestIpv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..46))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address of icmp6 acl group."
::= { aclIcmp6RuleEntry 6 }
aclIcmp6DestPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IPv6-address prefix length of icmp6 acl group.Range 0~128"
::= { aclIcmp6RuleEntry 7 }
aclIcmp6FlowLabel OBJECT-TYPE
SYNTAX Integer32 (0..1048576)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of FlowLabel.1048576 means do not use this filter.Range 0~1048576."
::= { aclIcmp6RuleEntry 8 }
aclIcmp6Dscp OBJECT-TYPE
SYNTAX DSCPValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of DSCP.64 means do not use this filter.Range 0~64."
::= { aclIcmp6RuleEntry 9 }
aclIcmp6Fragments OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching fragmented packet.
This node can not be setted true if aclIcmp6Type is setted. True(1),False(2)."
::= { aclIcmp6RuleEntry 10 }
aclIcmp6Routed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The flag of matching routed packet. True(1),False(2)."
::= { aclIcmp6RuleEntry 11 }
aclIcmp6Options OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The flag of matching packet with ipv6 option. True(1),False(2)."
::= { aclIcmp6RuleEntry 12 }
aclIcmp6Type OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of ICMPv6 packet.Range 0~256.
This node can not be setted if aclIcmp6Fragments is true."
::= { aclIcmp6RuleEntry 13 }
aclIcmp6Code OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The code of ICMPv6 packet.Range 0~256.
This node can not be setted if aclIcmp6Type is not setted."
::= { aclIcmp6RuleEntry 14 }
aclIcmp6TimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Time-range of icmp6 acl rule. Range 0~20."
::= { aclIcmp6RuleEntry 15 }
aclIcmp6RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { aclIcmp6RuleEntry 17 }
globalQos OBJECT IDENTIFIER ::= { qos 1 }
ifQos OBJECT IDENTIFIER ::= { qos 2 }
cbQoS OBJECT IDENTIFIER ::= { qos 3 }
srvQos OBJECT IDENTIFIER ::= { qos 4 }
stats OBJECT IDENTIFIER ::= { qos 10 }
--
--type definitions
--
--ColorType
ColorType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Color of the flow. "
SYNTAX INTEGER
{
none(0),
red(1),
yellow(2),
green(3)
}
--PriMapType
PriMapType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of map."
SYNTAX INTEGER
{
cos(1),
dscp(2),
exp(3),
ipPre(4)
}
--IfQueueId
IfQueueId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Queue Id"
SYNTAX Integer32 (0..7)
--
--end of type definitions
--
--
-- Node definitions
--
-- ifQosShapeObjects
ifQosShapeObjects OBJECT IDENTIFIER ::= { ifQos 1 }
-- ifQosShapeIfCfgTable
--
ifQosShapeIfCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosShapeIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface shape."
::= { ifQosShapeObjects 1 }
ifQosShapeIfCfgEntry OBJECT-TYPE
SYNTAX IfQosShapeIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of interface shape talbe."
INDEX { ifIndex }
::= { ifQosShapeIfCfgTable 1 }
IfQosShapeIfCfgEntry ::=
SEQUENCE
{
ifQosShapeIfCfgType
INTEGER,
ifQosShapeIfCfgPercent
Integer32,
ifQosShapeIfCfgRate
Integer32,
ifQosShapeIfCfgRowStatus
RowStatus
}
ifQosShapeIfCfgType OBJECT-TYPE
SYNTAX INTEGER {percent(1), rate(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port shape mode type.
1 means port shape is based on percent of interface max bandwidth.
2 means port shape is based on the configured rate."
::= { ifQosShapeIfCfgEntry 1 }
ifQosShapeIfCfgPercent OBJECT-TYPE
SYNTAX Integer32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Percent value of interface max bandwidth. Range is <0-99>."
::= { ifQosShapeIfCfgEntry 2 }
ifQosShapeIfCfgRate OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Rate of interface max value. Range <0-10000000>kbps."
::= { ifQosShapeIfCfgEntry 3 }
ifQosShapeIfCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ifQosShapeIfCfgEntry 4 }
-- ifQosShapeQueueCfgTable
--
ifQosShapeQueueCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosShapeQueueCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface queue shape."
::= { ifQosShapeObjects 2 }
ifQosShapeQueueCfgEntry OBJECT-TYPE
SYNTAX IfQosShapeQueueCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of interface queue shape table."
INDEX { ifIndex,
ifQosShapeQueueCfgQueueId}
::= { ifQosShapeQueueCfgTable 1 }
IfQosShapeQueueCfgEntry ::=
SEQUENCE
{
ifQosShapeQueueCfgQueueId
IfQueueId,
ifQosShapeQueueCfgType
INTEGER,
ifQosShapeQueueCfgPercent
Integer32,
ifQosShapeQueueCfgPercentPeak
Integer32,
ifQosShapeQueueCfgRate
Integer32,
ifQosShapeQueueCfgRatePeak
Integer32,
ifQosShapeQueueCfgRowStatus
RowStatus
}
ifQosShapeQueueCfgQueueId OBJECT-TYPE
SYNTAX IfQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue Id of the interface. Range <0-7>"
::= { ifQosShapeQueueCfgEntry 1 }
ifQosShapeQueueCfgType OBJECT-TYPE
SYNTAX INTEGER {percent(1), rate(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port shape mode type.
1 means queue shape is based on percent of interface max bandwidth.
2 means queue shape is based on the configured rate.
If no shape is configured, zero will be got."
::= { ifQosShapeQueueCfgEntry 2 }
ifQosShapeQueueCfgPercent OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Percent value of interface max bandwidth. Range is <0-100>.
This value influences the commit information rate.
This value should not be larger than ifQosShapeQueueCfgPercentPeak.
If the queue shape is rate mode, this value is 0."
::= { ifQosShapeQueueCfgEntry 3 }
ifQosShapeQueueCfgPercentPeak OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Percent value of interface max bandwidth. Range is <0-100>.
This value influences the peak information rate.
This value should not be smaller than ifQosShapeQueueCfgPercent.
If the queue shape is rate mode, this value is 0."
::= { ifQosShapeQueueCfgEntry 4 }
ifQosShapeQueueCfgRate OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit information rate of interface queue shaping. Range <0-10000000>kbps.
This value should not be larger than ifQosShapeQueueCfgRatePeak.
If the queue shape is percent mode, this value is 0."
::= { ifQosShapeQueueCfgEntry 5 }
ifQosShapeQueueCfgRatePeak OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak information rate of interface queue shaping. Range <0-10000000>kbps.
This value should not be smaller than ifQosShapeQueueCfgRate.
If the queue shape is percent mode, this value is 0."
::= { ifQosShapeQueueCfgEntry 6 }
ifQosShapeQueueCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ifQosShapeQueueCfgEntry 7 }
-- ifQosQueueObjects
ifQosQueueObjects OBJECT IDENTIFIER ::= { ifQos 2 }
-- ifQosQueueClassDrrWeightTable
--
ifQosQueueClassDrrWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosQueueClassDrrWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface queue class and Drr Weight ."
::= { ifQosQueueObjects 1 }
ifQosQueueClassDrrWeightEntry OBJECT-TYPE
SYNTAX IfQosQueueClassDrrWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface queue class and Drr Weight entry."
INDEX { ifIndex ,ifQosQueueClassDrrWeightQueueId}
::= { ifQosQueueClassDrrWeightTable 1 }
IfQosQueueClassDrrWeightEntry ::=
SEQUENCE
{
ifQosQueueClassDrrWeightQueueId
IfQueueId,
ifQosQueueClass
Integer32,
ifQosQueueDrrWeight
Integer32
}
ifQosQueueClassDrrWeightQueueId OBJECT-TYPE
SYNTAX IfQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue Id.Range is <0-7>."
::= { ifQosQueueClassDrrWeightEntry 1 }
ifQosQueueClass OBJECT-TYPE
SYNTAX Integer32 (-1|0..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"<0-6>:Class Id of the selected queue.
Set -1 to return it to default value."
::= { ifQosQueueClassDrrWeightEntry 2 }
ifQosQueueDrrWeight OBJECT-TYPE
SYNTAX Integer32 (-1|1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DRR weight of selected queue.
<1-100>: DRR weight range.
Set -1 to return it to default value."
::= { ifQosQueueClassDrrWeightEntry 3 }
-- ifQosQueueManageCfgTable
--
ifQosQueueManageCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosQueueManageCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface queue management."
::= { ifQosQueueObjects 3 }
ifQosQueueManageCfgEntry OBJECT-TYPE
SYNTAX IfQosQueueManageCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of ifQosQueueManageCfgTable."
INDEX { ifIndex,
ifQosQueueManageQueueId }
::= { ifQosQueueManageCfgTable 1 }
IfQosQueueManageCfgEntry ::=
SEQUENCE
{
ifQosQueueManageQueueId
IfQueueId,
ifQosQueueManageDropType
Integer32,
ifQosQueueManageThresholdPrecedence0
Integer32,
ifQosQueueManageThresholdPrecedence1
Integer32,
ifQosQueueManageThresholdPrecedence2
Integer32,
ifQosQueueManageMinThresholdPre0
Integer32,
ifQosQueueManageMinThresholdPre1
Integer32,
ifQosQueueManageMinThresholdPre2
Integer32,
ifQosQueueManageMaxThresholdPre0
Integer32,
ifQosQueueManageMaxThresholdPre1
Integer32,
ifQosQueueManageMaxThresholdPre2
Integer32,
ifQosQueueManageDropProbabilityPre0
Integer32,
ifQosQueueManageDropProbabilityPre1
Integer32,
ifQosQueueManageDropProbabilityPre2
Integer32
}
ifQosQueueManageQueueId OBJECT-TYPE
SYNTAX IfQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue Id.Range is <0-7>"
::= { ifQosQueueManageCfgEntry 1 }
ifQosQueueManageDropType OBJECT-TYPE
SYNTAX Integer32(-1..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Queue management mode.
(-1) taildrop.
(0-10) the value of EWMA factor,default EWMA factor is 9.
If this value is (0-10), the drop type is weighted random early drop(wred) mode."
::= { ifQosQueueManageCfgEntry 2 }
ifQosQueueManageThresholdPrecedence0 OBJECT-TYPE
SYNTAX Integer32 (-1..12884)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop threshold for precedence0, only for taildrop mode.
65535 is returned for other mode.Range is <0-12884>.
The set of this value will be ignored for non-taildrop mode.
Set -1 to delete current configuration and retrieve default configuration.
For 1G port, default value is 224;
For 10G port, default value is 576"
::= { ifQosQueueManageCfgEntry 3 }
ifQosQueueManageThresholdPrecedence1 OBJECT-TYPE
SYNTAX Integer32 (-1|1..12885)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop threshold for precedence1, only for taildrop mode.
65535 is returned for other mode.Range is <1-12885>.
The set of this value will be ignored for non-taildrop mode.
Set -1 to delete current configuration and retrieve default configuration.
For 1G port, default value is 240;
For 10G port, default value is 592."
::= { ifQosQueueManageCfgEntry 4 }
ifQosQueueManageThresholdPrecedence2 OBJECT-TYPE
SYNTAX Integer32 (-1|2..12886)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop threshold for precedence1, only for taildrop mode.
65535 is returned for other mode. Range is <2-12886>.
The set of this value will be ignored for non-taildrop mode.
Set -1 to delete current configuration and retrieve default configuration
for all precedence.
For 1G port, default value is 256;
For 10G port, default value is 608."
::= { ifQosQueueManageCfgEntry 5 }
ifQosQueueManageMinThresholdPre0 OBJECT-TYPE
SYNTAX Integer32 (-1|0..12886)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence0 min threshold, only for wred mode.
65535 is returned for other mode. Range is <0-12886>.
The set of this value will be ignored for non-wred mode.
Set -1 to delete current configuration and retrieve default configuration
for all precedence.
For 1G port, default value is 16;"
::= { ifQosQueueManageCfgEntry 6 }
ifQosQueueManageMinThresholdPre1 OBJECT-TYPE
SYNTAX Integer32 (-1|0..12886)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence1 min threshold, only for wred mode.
65535 is returned for other mode. Range is <0-12886>.
The set of this value will be ignored for non-wred mode.
Set -1 to delete current configuration and retrieve default configuration
for all precedence.
For 1G port, default value is 24;"
::= { ifQosQueueManageCfgEntry 7 }
ifQosQueueManageMinThresholdPre2 OBJECT-TYPE
SYNTAX Integer32 (-1|0..12886)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence2 min threshold, only for wred mode.
65535 is returned for other mode. Range is <0-12886>.For 1G port, default value is 32;
Set -1 to delete current configuration and retrieve default configuration."
::= { ifQosQueueManageCfgEntry 8 }
ifQosQueueManageMaxThresholdPre0 OBJECT-TYPE
SYNTAX Integer32 (-1|1..12887)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence0 max threshold, only for wred mode,
65535 is returned for other mode.Range is <1-12887>.
The set of this value will be ignored for non-wred mode.
Set -1 to delete current configuration and retrieve default configuration
for all precedence.
For 1G port, default value is 480;"
::= { ifQosQueueManageCfgEntry 9 }
ifQosQueueManageMaxThresholdPre1 OBJECT-TYPE
SYNTAX Integer32 (-1|1..12887)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence1 max threshold, only for wred mode.
The set of this value will be ignored for non-wred mode.
65535 is returned for other mode. Range is <1-12887>.
Set -1 to delete current configuration and retrieve default configuration
for all precedence.
For 1G port, default value is 496;"
::= { ifQosQueueManageCfgEntry 10 }
ifQosQueueManageMaxThresholdPre2 OBJECT-TYPE
SYNTAX Integer32 (-1|1..12887)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence2 max threshold, only for wred mode.
The set of this value will be ignored for non-taildrop mode.
65535 is returned for other mode. Range is <1-12887>.
Set -1 to delete current configuration and retrieve default configuration
for all precedence.
For 1G port, default value is 512;"
::= { ifQosQueueManageCfgEntry 11 }
ifQosQueueManageDropProbabilityPre0 OBJECT-TYPE
SYNTAX Integer32 (-1|0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence0 drop probability, only for wred mode.
Set -1 to delete current configuration and retrieve default configuration.
The default value is 1024. -2 is returned for other mode. Range is <0-65535>."
DEFVAL{ 1024 }
::= { ifQosQueueManageCfgEntry 12 }
ifQosQueueManageDropProbabilityPre1 OBJECT-TYPE
SYNTAX Integer32 (-1|0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence1 drop probability, only for wred mode.
Set -1 to delete current configuration and retrieve default configuration.
The default value is 1024. -2 is returned for other mode. Range is <0-65535>."
DEFVAL{ 1024 }
::= { ifQosQueueManageCfgEntry 13 }
ifQosQueueManageDropProbabilityPre2 OBJECT-TYPE
SYNTAX Integer32 (-1|0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect drop precedence2 drop probability, only for wred mode.
Set -1 to delete current configuration and retrieve default configuration.
The default value is 1024. -2 is returned for other mode. Range is <0-65535>."
DEFVAL{ 1024 }
::= { ifQosQueueManageCfgEntry 14 }
--ifQosCarObjects
ifQosCarObjects OBJECT IDENTIFIER ::= { ifQos 3 }
--ifQosCarApplyTable
ifQosCarApplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosCarApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface CAR applied."
::= { ifQosCarObjects 1 }
ifQosCarApplyEntry OBJECT-TYPE
SYNTAX IfQosCarApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of ifQosCarApplyTable."
INDEX { ifIndex,
ifQosCarApplyDirection }
::= { ifQosCarApplyTable 1 }
IfQosCarApplyEntry ::=
SEQUENCE
{
ifQosCarApplyDirection
INTEGER,
ifQosCarApplyColorMode
INTEGER,
ifQosCarApplyCir
Integer32,
ifQosCarApplyCbs
Integer32,
ifQosCarApplyType
INTEGER,
ifQosCarApplyPir
Integer32,
ifQosCarApplyPbs
Integer32,
ifQosCarApplyDropColor
ColorType,
ifQosCarApplyUseL3Length
INTEGER,
ifQosCarApplyRowStatus
RowStatus
}
ifQosCarApplyDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction of this port-policer applied on.
(1) input.
(2) output."
::= { ifQosCarApplyEntry 1 }
ifQosCarApplyColorMode OBJECT-TYPE
SYNTAX INTEGER
{
colorAware(1),
colorBlind(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value 1 for color aware mode policer,
value 2 for color blind mode policer.
"
::= { ifQosCarApplyEntry 2 }
ifQosCarApplyCir OBJECT-TYPE
SYNTAX Integer32 (8..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit information rate (kbps).
Range is <8-10000000>."
::= { ifQosCarApplyEntry 3 }
ifQosCarApplyCbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit burst size (bytes).
Range is <1000-128000>."
DEFVAL {128000}
::= { ifQosCarApplyEntry 4 }
ifQosCarApplyType OBJECT-TYPE
SYNTAX INTEGER
{
rfc2697(1),
rfc2698(2),
rfc4115(3),
bwp(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set (1) is select rfc2697 mode.
Set (2) is select rfc2698 mode.
Set (3) is select rfc4115 mode.
Set (4) is select bwp mode."
::= { ifQosCarApplyEntry 5 }
-- ifQosCarApplyEbs OBJECT-TYPE
-- SYNTAX Integer32 (1000..128000)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "Excess burst size (bytes).
-- Range is <1000-128000>."
-- DEFVAL {128000}
-- ::= { ifQosCarApplyEntry 6 }
ifQosCarApplyPir OBJECT-TYPE
SYNTAX Integer32 (8..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When Type mode is rcf2698 means Peak information rate (kbps).
When Type mode is rfc2697&rfc4115&bwp means Excess Information Rate (kbps).
Range is <8-10000000>."
::= { ifQosCarApplyEntry 7 }
ifQosCarApplyPbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When Type mode is rcf2698 means Peak burst size (bytes).
When Type mode is rfc2697&rfc4115&bwp means Excess Burst Size (bytes).
Range is <1000-128000>."
DEFVAL {128000}
::= { ifQosCarApplyEntry 8 }
ifQosCarApplyDropColor OBJECT-TYPE
SYNTAX INTEGER
{
red(1),
yellow(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Drop color configuration.When configuring 'red(1)',
it only drops red packet; configuring 'yellow(2)',
it drops both 'red' and 'yellow' packet.
"
DEFVAL {red}
::= { ifQosCarApplyEntry 9 }
ifQosCarApplyUseL3Length OBJECT-TYPE
SYNTAX INTEGER
{
no(2),
yes(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"2 for using L2 frame length;
1 for using L3 length.
"
DEFVAL {no}
::= { ifQosCarApplyEntry 10 }
ifQosCarApplyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ifQosCarApplyEntry 11 }
-- ifQosPriObjects
ifQosPriObjects OBJECT IDENTIFIER ::= { ifQos 4 }
-- ifQosCosTable
--
ifQosCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface cos value."
::= { ifQosPriObjects 1 }
ifQosCosEntry OBJECT-TYPE
SYNTAX IfQosCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of ifQosCosTable."
INDEX { ifIndex }
::= { ifQosCosTable 1 }
IfQosCosEntry ::=
SEQUENCE
{
ifQosCosValue
Integer32
}
ifQosCosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cos value for this interface.Range is <0-7>.
The default CoS for each interface is 0.
"
::= { ifQosCosEntry 1 }
-- ifQosTrustTypeTable
--
ifQosTrustTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosTrustTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface trust type."
::= { ifQosPriObjects 2 }
ifQosTrustTypeEntry OBJECT-TYPE
SYNTAX IfQosTrustTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of ifQosTrustTypeTable."
INDEX { ifIndex }
::= { ifQosTrustTypeTable 1 }
IfQosTrustTypeEntry ::=
SEQUENCE
{
ifQosTrustTypeValue
INTEGER
}
ifQosTrustTypeValue OBJECT-TYPE
SYNTAX INTEGER
{
trustDefault(-1),
trustPort(0),
trustSTagCos(2),
trustDscpExp(3),
trustIpPre(4),
trustCTagCos(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trust priority type for this interface.
Set trust-default to delete current configuration and retrieve default configuration.
trustDefault(-1)
trustPort(0)
trustSTagCos(2)
trustDscpExp(3)
trustIpPre(4)
trustCTagCos(5)
"
::= { ifQosTrustTypeEntry 1 }
-- ifQosDomainTable
--
ifQosDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface Domain value."
::= { ifQosPriObjects 3 }
ifQosDomainEntry OBJECT-TYPE
SYNTAX IfQosDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of ifQosDomainTable."
INDEX { ifIndex }
::= { ifQosDomainTable 1 }
IfQosDomainEntry ::=
SEQUENCE
{
ifQosDomainValue
Integer32
}
ifQosDomainValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain value for this interface.
Range <0-7>. The default value is
0"
DEFVAL{0}
::= { ifQosDomainEntry 1 }
-- ifQosReplacePriObjects
ifQosReplacePriObjects OBJECT IDENTIFIER ::= { ifQos 5 }
-- ifQosReplaceTable
--
ifQosReplaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfQosReplaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ifQosReplaceEntry."
::= { ifQosReplacePriObjects 1 }
ifQosReplaceEntry OBJECT-TYPE
SYNTAX IfQosReplaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of ifQosReplaceTable."
INDEX { ifIndex }
::= { ifQosReplaceTable 1 }
IfQosReplaceEntry ::=
SEQUENCE
{
ifQosReplaceType
INTEGER
}
ifQosReplaceType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
cos(1),
cosctag(2),
cosstag(3),
dscpExp(4),
ctagdscp(5),
stagdscp(6),
nodscp(7),
nocos(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace priority type for this interface. The defult cos is stagcos;
The value of set this node only can be follow:
cos(1),
cosctag(2),
cosstag(3),
dscpExp(4),
nodscp(7),
nocos(8)"
DEFVAL {cos}
::= { ifQosReplaceEntry 1 }
-- Sub Module: CBQOS
--
-- Node definitions
--
-- cbQoSClassifierObjects
cbQoSClassifierObjects OBJECT IDENTIFIER ::= { cbQoS 1 }
cbQoSClassifierIndexNext OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
cbQoSClassifierIndex when creating rows in the
cbQoSClassifierCfgInfoTable.
If the value of this node is less than 0,
it indicates creating a Rowin cbQoSClassifierCfgInfoTable is not permitted.
"
::= { cbQoSClassifierObjects 1 }
-- cbQoSClassifierCfgInfoTable
--
cbQoSClassifierCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CBQoSClassifierCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Classifier configuration information."
::= { cbQoSClassifierObjects 2 }
cbQoSClassifierCfgInfoEntry OBJECT-TYPE
SYNTAX CBQoSClassifierCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Classifier Configuration Information Entry."
INDEX { cbQoSClassifierIndex }
::= { cbQoSClassifierCfgInfoTable 1 }
CBQoSClassifierCfgInfoEntry ::=
SEQUENCE
{
cbQoSClassifierIndex
Integer32,
cbQoSClassifierName
OCTET STRING,
cbQoSClassifierRuleCount
Integer32,
cbQoSClassifierOperator
INTEGER,
cbQoSClassifierMatchRuleNextIndex
Integer32,
cbQoSClassifierRowStatus
RowStatus
}
cbQoSClassifierIndex OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of this class-map.Range is <10000-20000>."
::= { cbQoSClassifierCfgInfoEntry 1 }
cbQoSClassifierName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of class-map. Only used in creating a conceptual row,
can not modified in an 'active' Row "
::= { cbQoSClassifierCfgInfoEntry 2 }
cbQoSClassifierRuleCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of match rules in class-map."
::= { cbQoSClassifierCfgInfoEntry 3 }
cbQoSClassifierOperator OBJECT-TYPE
SYNTAX INTEGER
{
and(1),
or(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Operator of the match rules of class-map. Default match operator is match-any.
'and(1)' for match-all rules. 'or(2)' for match-any rules.
"
DEFVAL {or}
::= { cbQoSClassifierCfgInfoEntry 4 }
cbQoSClassifierMatchRuleNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
cbQoSMatchRuleIndex when creating rows in the
cbQoSMatchRuleCfgInfoTable.Begin with 0.
If the value of this node is less than 0,
it indicates creating a Rowin cbQoSMatchRuleCfgInfoTable is not permitted.
"
::= { cbQoSClassifierCfgInfoEntry 5 }
cbQoSClassifierRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSClassifierCfgInfoEntry 6 }
--cbQoSMatchRuleCfgInfoTable
cbQoSMatchRuleCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CBQoSMatchRuleCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of match rule configuration in class-map. "
::= { cbQoSClassifierObjects 3 }
cbQoSMatchRuleCfgInfoEntry OBJECT-TYPE
SYNTAX CBQoSMatchRuleCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Match Rule Entry in Class-map."
INDEX { cbQoSClassifierIndex, cbQoSMatchRuleIndex }
::= { cbQoSMatchRuleCfgInfoTable 1 }
CBQoSMatchRuleCfgInfoEntry ::=
SEQUENCE
{
cbQoSMatchRuleIndex
Integer32,
cbQoSMatchRuleACLName
OCTET STRING,
cbQoSMatchRuleRowStatus
RowStatus
}
cbQoSMatchRuleIndex OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Match Rule. Currently only access-group(ACL) is used as matching rule.
Range is <10000-20000>."
::= { cbQoSMatchRuleCfgInfoEntry 1 }
cbQoSMatchRuleACLName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Match ACl name.Only used in creating a conceptual row,
can not modified in an 'active' Row "
::= { cbQoSMatchRuleCfgInfoEntry 2 }
cbQoSMatchRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSMatchRuleCfgInfoEntry 3 }
-- match evc is not supported by humber currently. 2011-08-05
--cbQoSMatchEvcTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF CbQoSMatchEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The table of Match EVC is used to define EVC matching rule for a QoS class map.
-- If CoS values are configured, CoS field in the packet from the EVC is inspected
-- and only those matching the configured values are regarded as matching packets.
-- Otherwise, CoS field is ignored and only EVC is considered in the matching rule."
-- ::= { cbQoSClassifierObjects 4 }
--
--cbQoSMatchEvcEntry OBJECT-TYPE
-- SYNTAX CbQoSMatchEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "One item of match entry."
-- INDEX { cbQoSMatchEvcClassMapIndex, cbQoSMatchEvcEvcIndex }
-- ::= { cbQoSMatchEvcTable 1 }
--
-- CbQoSMatchEvcEntry ::=
-- SEQUENCE
-- {
-- cbQoSMatchEvcClassMapIndex
-- Integer32,
-- cbQoSMatchEvcEvcIndex
-- Integer32,
-- cbQoSMatchEvcAddCos
-- OCTET STRING,
-- cbQoSMatchEvcRowStatus
-- RowStatus
-- }
--
--cbQoSMatchEvcClassMapIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..2048)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The index of Class-map."
-- ::= { cbQoSMatchEvcEntry 1 }
--
--
--cbQoSMatchEvcEvcIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..512)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The index of EVC entry."
-- ::= { cbQoSMatchEvcEntry 2 }
--
--cbQoSMatchEvcAddCos OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (1..15))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Add COS of Match EVC. The format is like 1,2,3."
-- ::= { cbQoSMatchEvcEntry 3 }
--
--
--cbQoSMatchEvcRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row.Now only realize CreateAndGo and
-- Destroy and Active."
-- ::= { cbQoSMatchEvcEntry 4 }
--
-- cbQoSPolicyObjects
--
cbQoSPolicyObjects OBJECT IDENTIFIER ::= { cbQoS 2 }
cbQoSPolicyIndexNext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
cbQoSPolicyIndex when creating rows in the
cbQoSPolicyCfgInfoTable.
"
::= { cbQoSPolicyObjects 1 }
-- cbQoSPolicyCfgInfoTable
--
cbQoSPolicyCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CBQoSPolicyCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of policy-map."
::= { cbQoSPolicyObjects 2 }
cbQoSPolicyCfgInfoEntry OBJECT-TYPE
SYNTAX CBQoSPolicyCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy-map table Entry."
INDEX {cbQoSPolicyIndex}
::= { cbQoSPolicyCfgInfoTable 1 }
CBQoSPolicyCfgInfoEntry ::=
SEQUENCE
{
cbQoSPolicyIndex
Integer32,
cbQoSPolicyName
OCTET STRING,
cbQoSPolicyClassCount
Integer32,
cbQoSPolicyClassNextIndex
Integer32,
cbQoSPolicyRowStatus
RowStatus
}
cbQoSPolicyIndex OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of this policy-map.Range is <10000-20000>."
::= { cbQoSPolicyCfgInfoEntry 1 }
cbQoSPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of this policy-map. Only used in creating a conceptual row,
can not modified in an 'active' Row "
::= { cbQoSPolicyCfgInfoEntry 2 }
cbQoSPolicyClassCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of class-maps in this policy-map."
::= { cbQoSPolicyCfgInfoEntry 3 }
cbQoSPolicyClassNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
cbQoSPolicyClassIndex when creating rows in the
cbQoSPolicyClassCfgInfoTable.
If the returned value is less 0,
it indicates creating a Rowis not permitted."
::= { cbQoSPolicyCfgInfoEntry 4 }
cbQoSPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSPolicyCfgInfoEntry 5 }
-- cbQoSPolicyClassCfgInfoTable
--
cbQoSPolicyClassCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CBQoSPolicyClassCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of policy-class."
::= { cbQoSPolicyObjects 3 }
cbQoSPolicyClassCfgInfoEntry OBJECT-TYPE
SYNTAX CBQoSPolicyClassCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy-class table Entry."
INDEX {cbQoSPolicyClassIndex,
cbQoSPolicyClassClassifierIndex}
::= { cbQoSPolicyClassCfgInfoTable 1 }
CBQoSPolicyClassCfgInfoEntry ::=
SEQUENCE
{
cbQoSPolicyClassIndex
Integer32,
cbQoSPolicyClassClassifierIndex
Integer32,
cbQoSPolicyClassClassifierName
OCTET STRING,
cbQoSPolicyClassRowStatus
RowStatus
}
cbQoSPolicyClassIndex OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of this policy-class.Range is <10000-20000>."
::= { cbQoSPolicyClassCfgInfoEntry 1 }
cbQoSPolicyClassClassifierIndex OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of classifier applied by a policy.
It is corresponding to cbQoSClassifierName.
The maximum index value 20000 is reserved for class-map class-default only."
::= { cbQoSPolicyClassCfgInfoEntry 2 }
cbQoSPolicyClassClassifierName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of classifier applied by a policy.
It should exist in cbQoSClassifierCfgInfoTable.
Only used in creating a conceptual row, can not modified in an 'active' row.
"
::= { cbQoSPolicyClassCfgInfoEntry 3 }
cbQoSPolicyClassRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSPolicyClassCfgInfoEntry 4 }
-- cbQoSBehaviorObjects
cbQoSBehaviorObjects OBJECT IDENTIFIER ::= { cbQoS 3 }
cbQoSAggregativeCarIndexNext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
cbQoSAggregativeCarIndex when creating rows in the
cbQoSAggregativeCarCfgInfoTable.
"
::= { cbQoSBehaviorObjects 1 }
-- cbQoSAggregativeCarCfgInfoTable
--
cbQoSAggregativeCarCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CBQoSAggregativeCarCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of aggregate-policer."
::= { cbQoSBehaviorObjects 2 }
cbQoSAggregativeCarCfgInfoEntry OBJECT-TYPE
SYNTAX CBQoSAggregativeCarCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aggregate-policer table Entry."
INDEX {cbQoSAggregativeCarIndex}
::= { cbQoSAggregativeCarCfgInfoTable 1 }
CBQoSAggregativeCarCfgInfoEntry ::=
SEQUENCE
{
cbQoSAggregativeCarIndex
Integer32,
cbQoSAggregativeCarName
OCTET STRING,
cbQoSAggregativeCarColorMode
INTEGER,
cbQoSAggregativeCarCir
Integer32,
cbQoSAggregativeCarCbs
Integer32,
cbQoSAggregativeCarType
INTEGER,
cbQoSAggregativeCarEbs
Integer32,
cbQoSAggregativeCarPir
Integer32,
cbQoSAggregativeCarPbs
Integer32,
cbQoSAggregativeCarDropColor
ColorType,
cbQoSAggregativeCarUseL3Length
INTEGER,
cbQoSAggregativeCarStats
INTEGER,
cbQoSAggregativeCarRowStatus
RowStatus
}
cbQoSAggregativeCarIndex OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of aggregate-policer.Range is <10000-20000>."
::= { cbQoSAggregativeCarCfgInfoEntry 1 }
cbQoSAggregativeCarName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of aggregate-policer.Only used in creating a conceptual row,
can not modified in an 'active' row.
"
::= { cbQoSAggregativeCarCfgInfoEntry 2 }
cbQoSAggregativeCarColorMode OBJECT-TYPE
SYNTAX INTEGER
{
colorAware(1),
colorBlind(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value 1 for color aware mode policer;
value 2 for color blind mode policer.
Can modified in an 'active' row.
"
DEFVAL {colorBlind}
::= { cbQoSAggregativeCarCfgInfoEntry 3 }
cbQoSAggregativeCarCir OBJECT-TYPE
SYNTAX Integer32 (8..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit information rate (kbps).Range is <8-10000000>.
Only used in creating a conceptual row,
can not modified in an 'active' row.
"
::= { cbQoSAggregativeCarCfgInfoEntry 4 }
cbQoSAggregativeCarCbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit burst size (bytes).Range is <1000-128000>.
Only used in creating a conceptual row,
can not modified in an 'active' row."
DEFVAL {128000}
::= { cbQoSAggregativeCarCfgInfoEntry 5 }
cbQoSAggregativeCarType OBJECT-TYPE
SYNTAX INTEGER
{
trtcm-mode(1),
srtcm-mode(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set (1) is select TRTCM mode.
Set (2) is select SRTCM mode."
::= { cbQoSAggregativeCarCfgInfoEntry 6 }
cbQoSAggregativeCarEbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Excess burst size (bytes).Range is <1000-128000>.
Only used in creating a conceptual row,
can not modified in an 'active' row.
If the cbQoSAggregativeCarPir is not zero,
this value will be ignored.
"
DEFVAL {128000}
::= { cbQoSAggregativeCarCfgInfoEntry 7 }
cbQoSAggregativeCarPir OBJECT-TYPE
SYNTAX Integer32 (8..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak information rate (kbps).Range is <8-10000000>.
Only used in creating a conceptual row,
can not modified in an 'active' row.
This valude should not be less than cbQoSAggregativeCarCir.
"
::= { cbQoSAggregativeCarCfgInfoEntry 8}
cbQoSAggregativeCarPbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak burst size (bytes).Range is <1000-128000>.
Only used in creating a conceptual row,
can not modified in an 'active' row.
If the cbQoSAggregativeCarPir is zero,
this value will be ignored;
This valude should not be less than cbQoSAggregativeCarCbs.
"
DEFVAL {128000}
::= { cbQoSAggregativeCarCfgInfoEntry 9 }
cbQoSAggregativeCarDropColor OBJECT-TYPE
SYNTAX INTEGER
{
red(1),
yellow(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Drop color configuration.When configuring 'red',
it only drops red packet; configuring 'yellow',
it drops both 'red' and 'yellow' packet.
Only used in creating a conceptual row,
can not modified in an 'active' row.
"
DEFVAL {red}
::= { cbQoSAggregativeCarCfgInfoEntry 10 }
cbQoSAggregativeCarUseL3Length OBJECT-TYPE
SYNTAX INTEGER
{
no(2),
yes(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"2 for using L2 frame length;
1 for using L3 length.
Only used in creating a conceptual row,
can not modified in an 'active' row.
"
DEFVAL {no}
::= { cbQoSAggregativeCarCfgInfoEntry 11 }
cbQoSAggregativeCarStats OBJECT-TYPE
SYNTAX INTEGER
{
no(2),
yes(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"2 policer stats is disable;
1 policer stats is enable.
Only used in creating a conceptual row,
can not modified in an 'active' row.
"
DEFVAL {no}
::= { cbQoSAggregativeCarCfgInfoEntry 12 }
cbQoSAggregativeCarRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSAggregativeCarCfgInfoEntry 13 }
-- cbQoSBehaviorCarCfgInfoTable
--
cbQoSBehaviorCarCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQoSBehaviorCarCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of behavior."
::= { cbQoSBehaviorObjects 3 }
cbQoSBehaviorCarCfgInfoEntry OBJECT-TYPE
SYNTAX CbQoSBehaviorCarCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Behavior table Entry."
INDEX {cbQoSBehaviorCarPolicyIndex,
cbQoSBehaviorCarPolicyClassIndex}
::= { cbQoSBehaviorCarCfgInfoTable 1 }
CbQoSBehaviorCarCfgInfoEntry ::=
SEQUENCE
{
cbQoSBehaviorCarPolicyIndex
Integer32,
cbQoSBehaviorCarPolicyClassIndex
Integer32,
cbQoSBehaviorCarColorMode
INTEGER,
cbQoSBehaviorCarCir
Integer32,
cbQoSBehaviorCarCbs
Integer32,
cbQoSBehaviorCarType
INTEGER,
cbQoSBehaviorCarPir
Integer32,
cbQoSBehaviorCarPbs
Integer32,
cbQoSBehaviorCarDropColor
ColorType,
cbQoSBehaviorCarUseL3Length
INTEGER,
cbQoSBehaviorCarStats
INTEGER,
cbQoSBehaviorCarRowStatus
RowStatus
}
cbQoSBehaviorCarPolicyIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy-map. Range is <10000-20000>.
Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry.
"
::= { cbQoSBehaviorCarCfgInfoEntry 1 }
cbQoSBehaviorCarPolicyClassIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy class-map. Range is <10000-20000>.
Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry.
"
::= { cbQoSBehaviorCarCfgInfoEntry 2 }
cbQoSBehaviorCarColorMode OBJECT-TYPE
SYNTAX INTEGER
{
colorAware(1),
colorBlind(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value 1 for color aware mode policer,
value 2 for color blind mode policer.
Only for policer behavior."
::= { cbQoSBehaviorCarCfgInfoEntry 5 }
cbQoSBehaviorCarCir OBJECT-TYPE
SYNTAX Integer32 (8..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit information rate (kbps).Range is <8-10000000>.
Only for policer behavior.
"
::= { cbQoSBehaviorCarCfgInfoEntry 6 }
cbQoSBehaviorCarCbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit burst size (bytes).Range is <1000-128000>.
Only for policer behavior.
"
DEFVAL {128000}
::= { cbQoSBehaviorCarCfgInfoEntry 7 }
cbQoSBehaviorCarType OBJECT-TYPE
SYNTAX INTEGER
{
rfc2697(1),
rfc2698(2),
rfc4115(3),
bwp(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set (1) is select rfc2697 mode.
Set (2) is select rfc2698 mode.
Set (3) is select rfc4115 mode.
Set (4) is select bwp mode."
::= { cbQoSBehaviorCarCfgInfoEntry 8 }
cbQoSBehaviorCarEbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Excess burst size (bytes).Range is <1000-128000>.
Only for policer behavior.
"
DEFVAL {128000}
::= { cbQoSBehaviorCarCfgInfoEntry 9 }
cbQoSBehaviorCarPir OBJECT-TYPE
SYNTAX Integer32 (8..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak information rate (kbps).Range is <8-10000000>.
Only for policer behavior.
"
::= { cbQoSBehaviorCarCfgInfoEntry 10 }
cbQoSBehaviorCarPbs OBJECT-TYPE
SYNTAX Integer32 (1000..128000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak burst size (bytes).Range is <1000-128000>.
Only for policer behavior.
"
DEFVAL {128000}
::= { cbQoSBehaviorCarCfgInfoEntry 11 }
cbQoSBehaviorCarDropColor OBJECT-TYPE
SYNTAX INTEGER
{
red(1),
yellow(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Drop color configuration.Only 'red' and 'yellow' can be used here.
When configuring 'red(1)', it only drops red packet;
configuring 'yellow(2)', it drops both 'red' and 'yellow' packet.
Only for policer behavior.
When policy mode is aggregative policer, the result of DropColor will be none(0).
"
DEFVAL {red}
::= { cbQoSBehaviorCarCfgInfoEntry 12 }
cbQoSBehaviorCarUseL3Length OBJECT-TYPE
SYNTAX INTEGER
{
no(2),
yes(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"2 for using L2 frame length;
1 for using L3 length.
Only for policer behavior.
"
DEFVAL {no}
::= { cbQoSBehaviorCarCfgInfoEntry 13 }
cbQoSBehaviorCarStats OBJECT-TYPE
SYNTAX INTEGER
{
no(2),
yes(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"2 policer stats is disable;
1 policer stats is enable.
Only for policer behavior.
"
DEFVAL {no}
::= { cbQoSBehaviorCarCfgInfoEntry 14 }
cbQoSBehaviorCarRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSBehaviorCarCfgInfoEntry 15 }
-- cbQoSBehaviorPriColorCfgInfoTable
--
cbQoSBehaviorPriColorCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQoSBehaviorPriColorCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of setting priority-color behavior."
::= { cbQoSBehaviorObjects 4 }
cbQoSBehaviorPriColorCfgInfoEntry OBJECT-TYPE
SYNTAX CbQoSBehaviorPriColorCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Setting priority-color table Entry."
INDEX {cbQoSBehaviorPriColorPolicyIndex,
cbQoSBehaviorPriColorPolicyClassIndex}
::= { cbQoSBehaviorPriColorCfgInfoTable 1 }
CbQoSBehaviorPriColorCfgInfoEntry ::=
SEQUENCE
{
cbQoSBehaviorPriColorPolicyIndex
Integer32,
cbQoSBehaviorPriColorPolicyClassIndex
Integer32,
cbQoSBehaviorPriColorSetPriority
Integer32,
cbQoSBehaviorPriColorSetColor
ColorType
}
cbQoSBehaviorPriColorPolicyIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy-map. Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry.
"
::= { cbQoSBehaviorPriColorCfgInfoEntry 1 }
cbQoSBehaviorPriColorPolicyClassIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy class-map.Range is <10000-20000>.
Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry.
"
::= { cbQoSBehaviorPriColorCfgInfoEntry 2 }
cbQoSBehaviorPriColorSetPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Internal priority value.Range id <0-63>.
Default priority is 0."
::= { cbQoSBehaviorPriColorCfgInfoEntry 3 }
cbQoSBehaviorPriColorSetColor OBJECT-TYPE
SYNTAX ColorType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Internal color. Set (1)red, (2)yellow, (3)green.
Set (0) means no set priority."
::= { cbQoSBehaviorPriColorCfgInfoEntry 4 }
-- cbQoSBehaviorOptionTable
--
cbQoSBehaviorOptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQoSBehaviorOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of behavior."
::= { cbQoSBehaviorObjects 5 }
cbQoSBehaviorOptionEntry OBJECT-TYPE
SYNTAX CbQoSBehaviorOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ClassTrafficOption table Entry."
INDEX {cbQoSBehaviorOptionPolicyIndex,
cbQoSBehaviorOptionPolicyClassIndex}
::= { cbQoSBehaviorOptionTable 1 }
CbQoSBehaviorOptionEntry ::=
SEQUENCE
{
cbQoSBehaviorOptionPolicyIndex
Integer32,
cbQoSBehaviorOptionPolicyClassIndex
Integer32,
cbQoSBehaviorOptionTrust
INTEGER,
cbQoSBehaviorOptionStatsEn
INTEGER,
cbQoSBehaviorOptionRedirectIfindex
Integer32,
cbQoSBehaviorOptionMonitorSession
Integer32
}
cbQoSBehaviorOptionPolicyIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy-map.Range is <10000-20000>.
Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry.
"
::= { cbQoSBehaviorOptionEntry 1 }
cbQoSBehaviorOptionPolicyClassIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy class-map.Range is <10000-20000>.
Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry.
"
::= { cbQoSBehaviorOptionEntry 2 }
cbQoSBehaviorOptionTrust OBJECT-TYPE
SYNTAX INTEGER
{
trustNone(-1),
trustPort(0),
trustCos(2),
trustDscp(3),
trustIpPre(4),
trustCosCtag(5),
trustCosStag(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use which prioritization type for this flow.
trustNone(-1)
trustPort(0)
trustCos(2)
trustDscp(3)
trustIpPre(4)
trustCosCtag(5)
trustCosStag(6)
"
DEFVAL { trustNone }
::= { cbQoSBehaviorOptionEntry 3 }
cbQoSBehaviorOptionStatsEn OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1 for enable statistics for each ace in class map;
2 for disable statistics for each ace in class map.
Default value is 2."
DEFVAL { disable }
::= { cbQoSBehaviorOptionEntry 4 }
cbQoSBehaviorOptionRedirectIfindex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"<1-65535>:Interface index of redirect.
Set 0 means no redirect. "
DEFVAL { 0 }
::= { cbQoSBehaviorOptionEntry 5 }
cbQoSBehaviorOptionMonitorSession OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"<1-3> monitor session number;
0 no monitor, default value is 0."
DEFVAL { 0 }
::= { cbQoSBehaviorOptionEntry 6 }
-- cbQoSBehaviorCarAgpCfgTable
--
cbQoSBehaviorCarAgpCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQoSBehaviorCarAgpCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of behavior."
::= { cbQoSBehaviorObjects 6 }
cbQoSBehaviorCarAgpCfgEntry OBJECT-TYPE
SYNTAX CbQoSBehaviorCarAgpCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Behavior table Entry."
INDEX {cbQoSBehaviorCarAgpPolicyIndex,
cbQoSBehaviorCarAgpPolicyClassIndex}
::= { cbQoSBehaviorCarAgpCfgTable 1 }
CbQoSBehaviorCarAgpCfgEntry ::=
SEQUENCE
{
cbQoSBehaviorCarAgpPolicyIndex
Integer32,
cbQoSBehaviorCarAgpPolicyClassIndex
Integer32,
cbQoSBehaviorCarAgpCarName
OCTET STRING,
cbQoSBehaviorCarAgpRowStatus
RowStatus
}
cbQoSBehaviorCarAgpPolicyIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy-map. Range is <10000-20000>.
Associated with cbQoSPolicyIndex of cbQoSPolicyCfgInfoEntry.
"
::= { cbQoSBehaviorCarAgpCfgEntry 1 }
cbQoSBehaviorCarAgpPolicyClassIndex OBJECT-TYPE
SYNTAX Integer32(10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of Policy class-map. Range is <10000-20000>.
Associated with cbQoSPolicyClassIndex of cbQoSPolicyClassCfgInfoEntry.
"
::= { cbQoSBehaviorCarAgpCfgEntry 2 }
cbQoSBehaviorCarAgpCarName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Only for aggregative policer name.
"
::= { cbQoSBehaviorCarAgpCfgEntry 3 }
cbQoSBehaviorCarAgpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSBehaviorCarAgpCfgEntry 15 }
-- cbQoSApplyPolicyObjects
cbQoSApplyPolicyObjects OBJECT IDENTIFIER ::= { cbQoS 4 }
-- cbQoSIfApplyPolicyTable
--
cbQoSIfApplyPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CBQoSIfApplyPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of policy applied on interface."
::= { cbQoSApplyPolicyObjects 1 }
cbQoSIfApplyPolicyEntry OBJECT-TYPE
SYNTAX CBQoSIfApplyPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy-applied table Entry."
INDEX {cbQoSIfApplyPolicyIfIndex,
cbQoSIfApplyPolicyDirection}
::= { cbQoSIfApplyPolicyTable 1 }
CBQoSIfApplyPolicyEntry ::=
SEQUENCE
{
cbQoSIfApplyPolicyIfIndex
Integer32,
cbQoSIfApplyPolicyDirection
INTEGER,
cbQoSIfApplyPolicyIndex
Integer32,
cbQoSIfApplyPolicyName
OCTET STRING,
cbQoSIfApplyPolicyRowStatus
RowStatus
}
cbQoSIfApplyPolicyIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ifindex. The interface should only be physical, vlan, or linkagg interface. "
::= { cbQoSIfApplyPolicyEntry 1 }
cbQoSIfApplyPolicyDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction of this service-policy applied on.
1. input direction.
2. output direction."
::= { cbQoSIfApplyPolicyEntry 2 }
cbQoSIfApplyPolicyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of policy in cbQoSPolicyCfgInfoTable.
It is corresponding to cbQoSIfApplyPolicyName."
::= { cbQoSIfApplyPolicyEntry 3 }
cbQoSIfApplyPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of policy applied.
It should exist in cbQoSPolicyCfgInfoTable.
Only used in creating a conceptual row, can not modified in an 'active' Row "
::= { cbQoSIfApplyPolicyEntry 4 }
cbQoSIfApplyPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cbQoSIfApplyPolicyEntry 5 }
-- Sub Module: GLOBALQOS
globalQosEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable qos globally. enable(1),disable(2)."
::= { globalQos 1 }
globalQosFlowFirst OBJECT-TYPE
SYNTAX INTEGER
{
false(2),
true(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 'true(1)' for flow policer first, 'false(2)' for port policer first.
Default value is false(2)."
DEFVAL{false}
::= { globalQos 2 }
globalQosResetMapObjects OBJECT IDENTIFIER ::= { globalQos 3 }
globalQosResetDomainMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosResetDomainMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Reset configuration of qos maping table in specified domain."
::= { globalQosResetMapObjects 1 }
globalQosResetDomainMapEntry OBJECT-TYPE
SYNTAX GlobalQosResetDomainMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosResetDomainMapTable."
INDEX {
globalQosResetDomainMapDomain
}
::= { globalQosResetDomainMapTable 1 }
GlobalQosResetDomainMapEntry ::=
SEQUENCE
{
globalQosResetDomainMapDomain
Integer32,
globalQosResetDomainMapType
INTEGER
}
globalQosResetDomainMapDomain OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Qos domain.Range is <0-7>."
::= { globalQosResetDomainMapEntry 1 }
globalQosResetDomainMapType OBJECT-TYPE
SYNTAX INTEGER
{
cosPriColor(1),
dscpPriColor(2),
expPriColor(3),
ipPrecPriColor(4),
priColorCos(5),
priColorDscp(6),
priColorExp(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restore the whole running map table to system default table.
Set the value to restore related table.
cosPriColor(1) Restore the COS-to-Priority/Color map
dscpPriColor(2) Restore dscp-priority-color map
expPriColor(3) Restore the exp-to-priority/color map
ipPrecPriColor(4) Restore the IP Precedence to Pri/Color map
priColorCos(5) Restore PRI_COLOR-to-COS map
priColorDscp(6) Restore PRI_COLOR-to-DSCP map
priColorExp(7) Restore PRI_COLOR-to-EXP map
The get of this value alway return 0"
::= { globalQosResetDomainMapEntry 2 }
globalQosResetPriColorQidTid OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 1 to reset priority-color-queueId-thresholdId mapping.
Zero will be returned. "
::= { globalQosResetMapObjects 2 }
-- globalQosMapObjects
globalQosMapObjects OBJECT IDENTIFIER ::= { globalQos 4 }
-- globalQosMapIngressTable
--
globalQosMapIngressTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosMapIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Running table of interface ingress map."
::= { globalQosMapObjects 1 }
globalQosMapIngressEntry OBJECT-TYPE
SYNTAX GlobalQosMapIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosMapIngressTable."
INDEX {
globalQosMapIngressType,
globalQosMapIngressDomain,
globalQosMapIngressValue}
::= { globalQosMapIngressTable 1 }
GlobalQosMapIngressEntry ::=
SEQUENCE
{
globalQosMapIngressType
PriMapType,
globalQosMapIngressDomain
Integer32,
globalQosMapIngressValue
Integer32,
globalQosMapIngressToPriority
Integer32,
globalQosMapIngressToColor
ColorType
}
globalQosMapIngressType OBJECT-TYPE
SYNTAX PriMapType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of map.
cos(1),
dscp(2),
exp(3),
ipPre(4) "
::= { globalQosMapIngressEntry 1 }
globalQosMapIngressDomain OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ingress domain. Range is <0-7>."
::= { globalQosMapIngressEntry 2 }
globalQosMapIngressValue OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Different type has different GlobalQosMapIngressValue.
Type-name Range of GlobalQosMapIngressValue
cos (0..7)
dscp (0..63)
ipPre (0..7)
exp (0..7)"
::= { globalQosMapIngressEntry 3 }
globalQosMapIngressToPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Internal priority value.Range is <0-63>."
::= { globalQosMapIngressEntry 4 }
globalQosMapIngressToColor OBJECT-TYPE
SYNTAX ColorType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Internal color.Set (1)red, (2)yellow, (3)green."
::= { globalQosMapIngressEntry 5 }
-- globalQosMapEgressTable
--
globalQosMapEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosMapEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Running table of interface egress map."
::= { globalQosMapObjects 2 }
globalQosMapEgressEntry OBJECT-TYPE
SYNTAX GlobalQosMapEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosMapEgressTable"
INDEX {
globalQosMapEgressType,
globalQosMapEgressDomain,
globalQosMapEgressPriority,
globalQosMapEgressColor}
::= { globalQosMapEgressTable 1 }
GlobalQosMapEgressEntry ::=
SEQUENCE
{
globalQosMapEgressType
PriMapType,
globalQosMapEgressDomain
Integer32,
globalQosMapEgressPriority
Integer32,
globalQosMapEgressColor
ColorType,
globalQosMapEgressValue
Integer32
}
globalQosMapEgressType OBJECT-TYPE
SYNTAX PriMapType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of the egress map-table. Only value cos(1), dscp(2), exp(3) can be use."
::= { globalQosMapEgressEntry 1 }
globalQosMapEgressDomain OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Egress domain.Range is <0-7>."
::= { globalQosMapEgressEntry 2 }
globalQosMapEgressPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal priority value.Range is <0-63>."
::= { globalQosMapEgressEntry 3 }
globalQosMapEgressColor OBJECT-TYPE
SYNTAX ColorType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal color. Set (1)red, (2)yellow, (3)green."
::= { globalQosMapEgressEntry 4 }
globalQosMapEgressValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Different type has different GlobalQosMapIngressValue.
Type-name Range of GlobalQosMapIngressValue
cos (0..7)
dscp (0..63)
exp (0..7)"
::= { globalQosMapEgressEntry 5 }
globalQosMapPriColorQidTidTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosMapPriColorQidTidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of qos map priority-color to QueueId - thresholdId."
::= { globalQosMapObjects 3 }
globalQosMapPriColorQidTidEntry OBJECT-TYPE
SYNTAX GlobalQosMapPriColorQidTidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosMapPriColorQidTidTable."
INDEX {
globalQosMapPriColorQidTidPriority,
globalQosMapPriColorQidTidColor}
::= { globalQosMapPriColorQidTidTable 1 }
GlobalQosMapPriColorQidTidEntry ::=
SEQUENCE
{
globalQosMapPriColorQidTidPriority
Integer32,
globalQosMapPriColorQidTidColor
ColorType,
globalQosMapPriColorQidTidQueueId
IfQueueId,
globalQosMapPriColorQidTidThresholdId
Integer32
}
globalQosMapPriColorQidTidPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QoS Map Priority to be configured.Range is <0-63>."
::= { globalQosMapPriColorQidTidEntry 1 }
globalQosMapPriColorQidTidColor OBJECT-TYPE
SYNTAX ColorType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal color. Set (1)red, (2)yellow, (3)green."
::= { globalQosMapPriColorQidTidEntry 2 }
globalQosMapPriColorQidTidQueueId OBJECT-TYPE
SYNTAX IfQueueId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue id to be mapped to.Range is <0-7>."
::= { globalQosMapPriColorQidTidEntry 3 }
globalQosMapPriColorQidTidThresholdId OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threasholdId id to be mapped to.Range is <0-3>."
::= { globalQosMapPriColorQidTidEntry 4 }
-- globalQosMapIngressDefaultTable
--
globalQosMapIngressDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosMapIngressDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface ingress map."
::= { globalQosMapObjects 4 }
globalQosMapIngressDefaultEntry OBJECT-TYPE
SYNTAX GlobalQosMapIngressDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosMapIngressDefaultTable."
INDEX {
globalQosMapIngressDefaultType,
globalQosMapIngressDefaultDomain,
globalQosMapIngressDefaultValue}
::= { globalQosMapIngressDefaultTable 1 }
GlobalQosMapIngressDefaultEntry ::=
SEQUENCE
{
globalQosMapIngressDefaultType
PriMapType,
globalQosMapIngressDefaultDomain
Integer32,
globalQosMapIngressDefaultValue
Integer32,
globalQosMapIngressDefaultToPriority
Integer32,
globalQosMapIngressDefaultToColor
ColorType
}
globalQosMapIngressDefaultType OBJECT-TYPE
SYNTAX PriMapType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of map.
cos(1),
dscp(2),
exp(3),
ipPre(4) "
::= { globalQosMapIngressDefaultEntry 1 }
globalQosMapIngressDefaultDomain OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ingress domain."
::= { globalQosMapIngressDefaultEntry 2 }
globalQosMapIngressDefaultValue OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Different type has different GlobalQosMapIngressValue.
Type-name Range of GlobalQosMapIngressValue
cos (0..7)
dscp (0..63)
ipPre (0..7)
exp (0..7)"
::= { globalQosMapIngressDefaultEntry 3 }
globalQosMapIngressDefaultToPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal priority value."
::= { globalQosMapIngressDefaultEntry 4 }
globalQosMapIngressDefaultToColor OBJECT-TYPE
SYNTAX ColorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal color.Set (1)red, (2)yellow, (3)green."
::= { globalQosMapIngressDefaultEntry 5 }
-- globalQosMapEgressDefaultTable
--
globalQosMapEgressDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosMapEgressDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface egress map."
::= { globalQosMapObjects 5 }
globalQosMapEgressDefaultEntry OBJECT-TYPE
SYNTAX GlobalQosMapEgressDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosMapEgressDefaultTable."
INDEX {
globalQosMapEgressDefaultType,
globalQosMapEgressDefaultDomain,
globalQosMapEgressDefaultPriority,
globalQosMapEgressDefaultColor}
::= { globalQosMapEgressDefaultTable 1 }
GlobalQosMapEgressDefaultEntry ::=
SEQUENCE
{
globalQosMapEgressDefaultType
PriMapType,
globalQosMapEgressDefaultDomain
Integer32,
globalQosMapEgressDefaultPriority
Integer32,
globalQosMapEgressDefaultColor
ColorType,
globalQosMapEgressDefaultValue
Integer32
}
globalQosMapEgressDefaultType OBJECT-TYPE
SYNTAX PriMapType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of the egress map-table. Only valude cos(1), dscp(2), exp(3) can be use."
::= { globalQosMapEgressDefaultEntry 1 }
globalQosMapEgressDefaultDomain OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Egress domain."
::= { globalQosMapEgressDefaultEntry 2 }
globalQosMapEgressDefaultPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal priority value."
::= { globalQosMapEgressDefaultEntry 3 }
globalQosMapEgressDefaultColor OBJECT-TYPE
SYNTAX ColorType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal color. Set (1)red, (2)yellow, (3)green."
::= { globalQosMapEgressDefaultEntry 4 }
globalQosMapEgressDefaultValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Different type has different GlobalQosMapIngressValue.
Type-name Range of GlobalQosMapIngressValue
cos (0..7)
dscp (0..63)
exp (0..7)"
::= { globalQosMapEgressDefaultEntry 5 }
globalQosMapPriColorQidTidDefaultTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosMapPriColorQidTidDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of default qos mapping configuration of priority-color to QueueId - thresholdId."
::= { globalQosMapObjects 6 }
globalQosMapPriColorQidTidDefaultEntry OBJECT-TYPE
SYNTAX GlobalQosMapPriColorQidTidDefaultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosMapPriColorQidTidDefaultTable."
INDEX {
globalQosMapPriColorQidTidDefaultPriority,
globalQosMapPriColorQidTidDefaultColor}
::= { globalQosMapPriColorQidTidDefaultTable 1 }
GlobalQosMapPriColorQidTidDefaultEntry ::=
SEQUENCE
{
globalQosMapPriColorQidTidDefaultPriority
Integer32,
globalQosMapPriColorQidTidDefaultColor
ColorType,
globalQosMapPriColorQidTidDefaultQueueId
IfQueueId,
globalQosMapPriColorQidTidDefaultThresholdId
Integer32
}
globalQosMapPriColorQidTidDefaultPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal priority."
::= { globalQosMapPriColorQidTidDefaultEntry 1 }
globalQosMapPriColorQidTidDefaultColor OBJECT-TYPE
SYNTAX ColorType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal color. Set (1)red, (2)yellow, (3)green."
::= { globalQosMapPriColorQidTidDefaultEntry 2 }
globalQosMapPriColorQidTidDefaultQueueId OBJECT-TYPE
SYNTAX IfQueueId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The queue id."
::= { globalQosMapPriColorQidTidDefaultEntry 3 }
globalQosMapPriColorQidTidDefaultThresholdId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The threasholdId id."
::= { globalQosMapPriColorQidTidDefaultEntry 4 }
globalQosCfiTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalQosCfiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of qos domain cfi config."
::= { globalQos 5 }
globalQosCfiEntry OBJECT-TYPE
SYNTAX GlobalQosCfiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of globalQosCfiTable."
INDEX {
globalQosCfiDomain}
::= { globalQosCfiTable 1 }
GlobalQosCfiEntry ::=
SEQUENCE
{
globalQosCfiDomain
Integer32,
globalQosCfiEnable
TruthValue
}
globalQosCfiDomain OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"QoS domain to be configured. Range is <0~7>."
::= { globalQosCfiEntry 1 }
globalQosCfiEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfi enable status of qos domain.
Set (1)enable, (2)disable.
Default:(2)disable."
::= { globalQosCfiEntry 2 }
-- Sub Module: STATS
--
--type definitions
--
--Direction
DirectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The direction of policy on at interface."
SYNTAX INTEGER
{
inbound(1),
outbound(2)
}
--Enable
EnableType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The direction of policy on at interface."
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
--Clear value
QosStatsClear ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"cleared: Reset the value of the rule's counter.
nouse: 'nouse' will be returned when getting.
"
SYNTAX INTEGER
{
cleared(0),
nouse(1)
}
--
--end of type definitions
--
--srvQos definition
srvQosSapIngressObjects OBJECT IDENTIFIER ::= { srvQos 1 }
srvQosSapEgressObjects OBJECT IDENTIFIER ::= { srvQos 2 }
srvQosFreeQueueInfoObjects OBJECT IDENTIFIER ::= { srvQos 3 }
--sap ingress definition--
srvQosSapIngressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrvQosSapIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of qos sap ingress."
::= { srvQosSapIngressObjects 1 }
srvQosSapIngressEntry OBJECT-TYPE
SYNTAX SrvQosSapIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of qos sap ingress."
INDEX {srvQosSapIngressName}
::= { srvQosSapIngressTable 1 }
SrvQosSapIngressEntry ::=
SEQUENCE
{
srvQosSapIngressName
OCTET STRING,
srvQosSapIngressRowStatus
RowStatus,
srvQosSapIngressDescription
OCTET STRING,
srvQosSapIngressApplyPolicyMap
OCTET STRING
}
srvQosSapIngressName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the qos sap ingress."
::= { srvQosSapIngressEntry 1}
srvQosSapIngressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the srvQosSapIngressEntry row.
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { srvQosSapIngressEntry 2}
srvQosSapIngressDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Descrption of the qos sap ingress."
::= { srvQosSapIngressEntry 3}
srvQosSapIngressApplyPolicyMap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policy map for the qos sap ingress."
::= { srvQosSapIngressEntry 4}
--sap ingress policer definition--
srvQosSapIngressPolicerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrvQosSapIngressPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of qos sap ingress policer."
::= { srvQosSapIngressObjects 2}
srvQosSapIngressPolicerEntry OBJECT-TYPE
SYNTAX SrvQosSapIngressPolicerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of qos sap ingress policer."
INDEX {srvQosSapIngressName}
::= { srvQosSapIngressPolicerTable 1 }
SrvQosSapIngressPolicerEntry ::=
SEQUENCE
{
srvQosSapIngressPolicerMode
INTEGER,
srvQosSapIngressPolicerCir
Integer32,
srvQosSapIngressPolicerCbs
Integer32,
srvQosSapIngressPolicerEbs
Integer32,
srvQosSapIngressPolicerPir
Integer32,
srvQosSapIngressPolicerPbs
Integer32,
srvQosSapIngressPolicerDropColor
INTEGER,
srvQosSapIngressPolicerUseL3Length
INTEGER
}
srvQosSapIngressPolicerMode OBJECT-TYPE
SYNTAX INTEGER{ colorAware(0), colorBlind(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policer mode of the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 1}
srvQosSapIngressPolicerCir OBJECT-TYPE
SYNTAX Integer32(1..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cir of the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 2}
srvQosSapIngressPolicerCbs OBJECT-TYPE
SYNTAX Integer32(0..4000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cbs of the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 3}
srvQosSapIngressPolicerEbs OBJECT-TYPE
SYNTAX Integer32(0..4000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ebs of the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 4}
srvQosSapIngressPolicerPir OBJECT-TYPE
SYNTAX Integer32(1..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pir of the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 5}
srvQosSapIngressPolicerPbs OBJECT-TYPE
SYNTAX Integer32(0..4000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pbs of the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 6}
srvQosSapIngressPolicerDropColor OBJECT-TYPE
SYNTAX INTEGER{ none(0), red(1), yellow(2), green(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Drop color of the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 7}
srvQosSapIngressPolicerUseL3Length OBJECT-TYPE
SYNTAX INTEGER{ false(0), true(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If L3 length is used for the qos sap ingress."
::= { srvQosSapIngressPolicerEntry 8}
srvQosSapEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrvQosSapEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of qos sap Egress."
::= { srvQosSapEgressObjects 1 }
--sap egress definition--
srvQosSapEgressEntry OBJECT-TYPE
SYNTAX SrvQosSapEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of qos sap Egress."
INDEX {srvQosSapEgressName}
::= { srvQosSapEgressTable 1 }
SrvQosSapEgressEntry ::=
SEQUENCE
{
srvQosSapEgressName
OCTET STRING,
srvQosSapEgressRowStatus
RowStatus,
srvQosSapEgressDescription
OCTET STRING,
srvQosSapEgressShapeAverage
Integer32
}
srvQosSapEgressName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the qos sap Egress."
::= { srvQosSapEgressEntry 1}
srvQosSapEgressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the srvQosSapEgressEntry row.
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { srvQosSapEgressEntry 2}
srvQosSapEgressDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Descrption of the qos sap Egress."
::= { srvQosSapEgressEntry 3}
srvQosSapEgressShapeAverage OBJECT-TYPE
SYNTAX Integer32(0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total Rate of the qos sap Egress."
::= { srvQosSapEgressEntry 4}
--sap egress queue definition--
srvQosSapEgressQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrvQosSapEgressQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of qos sap egress queue."
::= { srvQosSapEgressObjects 2 }
srvQosSapEgressQueueEntry OBJECT-TYPE
SYNTAX SrvQosSapEgressQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of qos sap egress queue."
INDEX {srvQosSapEgressName, srvQosSapEgressQueueId}
::= { srvQosSapEgressQueueTable 1 }
SrvQosSapEgressQueueEntry ::=
SEQUENCE
{
srvQosSapEgressQueueId
Integer32,
srvQosSapEgressQueueShapeAverageRateCir
Integer32,
srvQosSapEgressQueueShapeAverageRatePir
Integer32
}
srvQosSapEgressQueueId OBJECT-TYPE
SYNTAX Integer32(0..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Id of the qos sap Egress Queue."
::= { srvQosSapEgressQueueEntry 1}
srvQosSapEgressQueueShapeAverageRateCir OBJECT-TYPE
SYNTAX Integer32(0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Shape rate for commit information rate, kbps."
::= { srvQosSapEgressQueueEntry 2}
srvQosSapEgressQueueShapeAverageRatePir OBJECT-TYPE
SYNTAX Integer32(0..10000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Shape rate for peak information rate, kbps."
::= { srvQosSapEgressQueueEntry 3}
--sap egress queue info definition--
srvQosSapEgressQueueInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrvQosSapEgressQueueInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of qos sap egress queue info."
::= { srvQosSapEgressObjects 3 }
srvQosSapEgressQueueInfoEntry OBJECT-TYPE
SYNTAX SrvQosSapEgressQueueInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of qos sap egress queue info."
INDEX {srvQosSapEgressName, srvQosSapEgressQueueId}
::= { srvQosSapEgressQueueInfoTable 1 }
SrvQosSapEgressQueueInfoEntry ::=
SEQUENCE
{
srvQosSapEgressQueueInfoRandomDetect
Integer32,
srvQosSapEgressQueueInfoTailDropThreshold0
Integer32,
srvQosSapEgressQueueInfoTailDropThreshold1
Integer32,
srvQosSapEgressQueueInfoTailDropThreshold2
Integer32,
srvQosSapEgressQueueInfoTailDropThreshold3
Integer32,
srvQosSapEgressQueueInfoRandomDetectMinThreshold0
Integer32,
srvQosSapEgressQueueInfoRandomDetectMinThreshold1
Integer32,
srvQosSapEgressQueueInfoRandomDetectMinThreshold2
Integer32,
srvQosSapEgressQueueInfoRandomDetectMinThreshold3
Integer32,
srvQosSapEgressQueueInfoRandomDetectMaxThreshold0
Integer32,
srvQosSapEgressQueueInfoRandomDetectMaxThreshold1
Integer32,
srvQosSapEgressQueueInfoRandomDetectMaxThreshold2
Integer32,
srvQosSapEgressQueueInfoRandomDetectMaxThreshold3
Integer32,
srvQosSapEgressQueueInfoRandomDetectDropProbability0
Integer32,
srvQosSapEgressQueueInfoRandomDetectDropProbability1
Integer32,
srvQosSapEgressQueueInfoRandomDetectDropProbability2
Integer32,
srvQosSapEgressQueueInfoRandomDetectDropProbability3
Integer32
}
srvQosSapEgressQueueInfoRandomDetect OBJECT-TYPE
SYNTAX Integer32 (-1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"-1: Tail Drop
0-10: WRED Exponential-Weighted-Moving-Average (EWMA) factor."
::= { srvQosSapEgressQueueInfoEntry 1}
srvQosSapEgressQueueInfoTailDropThreshold0 OBJECT-TYPE
SYNTAX Integer32(0..24571)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tail drop threshold0."
::= { srvQosSapEgressQueueInfoEntry 2}
srvQosSapEgressQueueInfoTailDropThreshold1 OBJECT-TYPE
SYNTAX Integer32(1..24572)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tail drop threshold1, should greater than threshold0."
::= { srvQosSapEgressQueueInfoEntry 3}
srvQosSapEgressQueueInfoTailDropThreshold2 OBJECT-TYPE
SYNTAX Integer32(2..24573)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tail drop threshold2, should greater than threshold1."
::= { srvQosSapEgressQueueInfoEntry 4}
srvQosSapEgressQueueInfoTailDropThreshold3 OBJECT-TYPE
SYNTAX Integer32(3..24574)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tail drop threshold3, should greater than threshold2."
::= { srvQosSapEgressQueueInfoEntry 5}
srvQosSapEgressQueueInfoRandomDetectMinThreshold0 OBJECT-TYPE
SYNTAX Integer32(0..24573)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold0's min threshold range."
::= { srvQosSapEgressQueueInfoEntry 6}
srvQosSapEgressQueueInfoRandomDetectMinThreshold1 OBJECT-TYPE
SYNTAX Integer32(0..24573)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold1's min threshold range."
::= { srvQosSapEgressQueueInfoEntry 7}
srvQosSapEgressQueueInfoRandomDetectMinThreshold2 OBJECT-TYPE
SYNTAX Integer32(0..24573)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold2's min threshold range."
::= { srvQosSapEgressQueueInfoEntry 8}
srvQosSapEgressQueueInfoRandomDetectMinThreshold3 OBJECT-TYPE
SYNTAX Integer32(0..24573)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold3's min threshold range."
::= { srvQosSapEgressQueueInfoEntry 9}
srvQosSapEgressQueueInfoRandomDetectMaxThreshold0 OBJECT-TYPE
SYNTAX Integer32(1..24574)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold0's max threshold range."
::= { srvQosSapEgressQueueInfoEntry 10}
srvQosSapEgressQueueInfoRandomDetectMaxThreshold1 OBJECT-TYPE
SYNTAX Integer32(1..24574)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold1's max threshold range."
::= { srvQosSapEgressQueueInfoEntry 11}
srvQosSapEgressQueueInfoRandomDetectMaxThreshold2 OBJECT-TYPE
SYNTAX Integer32(1..24574)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold2's max threshold range."
::= { srvQosSapEgressQueueInfoEntry 12}
srvQosSapEgressQueueInfoRandomDetectMaxThreshold3 OBJECT-TYPE
SYNTAX Integer32(1..24574)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold3's max threshold range."
::= { srvQosSapEgressQueueInfoEntry 13}
srvQosSapEgressQueueInfoRandomDetectDropProbability0 OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold0 drop probability range."
::= { srvQosSapEgressQueueInfoEntry 14}
srvQosSapEgressQueueInfoRandomDetectDropProbability1 OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold1 drop probability range."
::= { srvQosSapEgressQueueInfoEntry 15}
srvQosSapEgressQueueInfoRandomDetectDropProbability2 OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold2 drop probability range."
::= { srvQosSapEgressQueueInfoEntry 16}
srvQosSapEgressQueueInfoRandomDetectDropProbability3 OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Random-detect threshold3 drop probability range."
::= { srvQosSapEgressQueueInfoEntry 17}
--"show qos free-queue-info"
srvQosFreeQueueInfoServiceQueueNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queues allocated by each service."
::= { srvQosFreeQueueInfoObjects 1}
srvQosFreeQueueInfoMaxSupportQueueNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum support queue number."
::= { srvQosFreeQueueInfoObjects 2}
srvQosFreeQueueInfoAllocatedQueueNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The allocated queue number."
::= { srvQosFreeQueueInfoObjects 3}
srvQosFreeQueueInfoMaxSupportServiceNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum support service number."
::= { srvQosFreeQueueInfoObjects 4}
srvQosFreeQueueInfoAllocatedServiceNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The allocated service number."
::= { srvQosFreeQueueInfoObjects 5}
--
-- Node definitions
--
-- Globle Stats enable
qosStatsEnableObjects OBJECT IDENTIFIER ::= { stats 1 }
qosStatsPolicyEnable OBJECT-TYPE
SYNTAX EnableType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of policer statistics.
(1) enable.
(2) disable."
::= { qosStatsEnableObjects 1 }
qosStatsQueueEnable OBJECT-TYPE
SYNTAX EnableType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of queue statistics.
(1) enable.
(2) disable."
::= { qosStatsEnableObjects 2 }
-- Globle Stats clear
qosStatsClearStaticsObjects OBJECT IDENTIFIER ::= { stats 2 }
-- Clear Policy QosStats
qosStatsClearPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsClearPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of clearing Stats for Policy in a QoS policy applied on the interface."
::= { qosStatsClearStaticsObjects 1 }
qosStatsClearPolicyEntry OBJECT-TYPE
SYNTAX QosStatsClearPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Clear Stats information entry."
INDEX {qosStatsClearPolicyIndex }
::= { qosStatsClearPolicyTable 1 }
QosStatsClearPolicyEntry ::=
SEQUENCE
{
qosStatsClearPolicyIndex
Integer32,
qosStatsClearPolicyPolicerStats
QosStatsClear,
qosStatsClearPolicyAceMatchStats
QosStatsClear
}
qosStatsClearPolicyIndex OBJECT-TYPE
SYNTAX Integer32 (10000..20000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy map entry index. Range 10000~20000."
::= { qosStatsClearPolicyEntry 1 }
qosStatsClearPolicyPolicerStats OBJECT-TYPE
SYNTAX QosStatsClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the value of the policer statistics in policy-map.Clear(0)."
::= { qosStatsClearPolicyEntry 2 }
qosStatsClearPolicyAceMatchStats OBJECT-TYPE
SYNTAX QosStatsClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the value of the ace-matching statistics in policy-map.Clear(0)."
::= { qosStatsClearPolicyEntry 3 }
-- Clearing port-policy QosStats
qosStatsClearPortPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsClearPortPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of clearing Stats for Policy
in a QoS PortPolicy applied on the interface."
::= { qosStatsClearStaticsObjects 2 }
qosStatsClearPortPolicyEntry OBJECT-TYPE
SYNTAX QosStatsClearPortPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Clear Stats information entry."
INDEX { qosStatsClearPortPolicyIfIndex,
qosStatsClearPortPolicyDirection }
::= { qosStatsClearPortPolicyTable 1 }
QosStatsClearPortPolicyEntry ::=
SEQUENCE
{
qosStatsClearPortPolicyIfIndex
Integer32,
qosStatsClearPortPolicyDirection
DirectionType,
qosStatsClearPortPolicyStats
QosStatsClear
}
qosStatsClearPortPolicyIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index, equal to ifIndex."
::= { qosStatsClearPortPolicyEntry 1 }
qosStatsClearPortPolicyDirection OBJECT-TYPE
SYNTAX DirectionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy direction:
inbound (1)
outbound (2)"
::= { qosStatsClearPortPolicyEntry 2 }
qosStatsClearPortPolicyStats OBJECT-TYPE
SYNTAX QosStatsClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the statistics of port policer.Clear(0)."
::= { qosStatsClearPortPolicyEntry 3 }
-- Clear Agg policy QosStats
qosStatsClearAggPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsClearAggPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of clearing Stats for Policy in a QoS AggPolicy applied on the
interface."
::= { qosStatsClearStaticsObjects 3 }
qosStatsClearAggPolicyEntry OBJECT-TYPE
SYNTAX QosStatsClearAggPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Clear agg policer stats information entry."
INDEX { qosStatsClearAggPolicyIndex }
::= { qosStatsClearAggPolicyTable 1 }
QosStatsClearAggPolicyEntry ::=
SEQUENCE
{
qosStatsClearAggPolicyIndex
Integer32,
qosStatsClearAggPolicyStats
QosStatsClear
}
qosStatsClearAggPolicyIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of aggregate-policer."
::= { qosStatsClearAggPolicyEntry 1 }
qosStatsClearAggPolicyStats OBJECT-TYPE
SYNTAX QosStatsClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the value of the Stats.Clear(0)."
::= { qosStatsClearAggPolicyEntry 2 }
-- Clear queue QosStats
qosStatsClearQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsClearQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of clearing Stats for Policy in a QoS Queue applied on the
interface."
::= { qosStatsClearStaticsObjects 4 }
qosStatsClearQueueEntry OBJECT-TYPE
SYNTAX QosStatsClearQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Clear Stats information entry."
INDEX { qosStatsClearQueueifIndex,
qosStatsClearQueueId}
::= { qosStatsClearQueueTable 1 }
QosStatsClearQueueEntry ::=
SEQUENCE
{
qosStatsClearQueueifIndex
Integer32,
qosStatsClearQueueId
IfQueueId,
qosStatsClearQueueStats
QosStatsClear
}
qosStatsClearQueueifIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index, equal to ifIndex."
::= { qosStatsClearQueueEntry 1 }
qosStatsClearQueueId OBJECT-TYPE
SYNTAX IfQueueId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface queue id."
::= { qosStatsClearQueueEntry 2 }
qosStatsClearQueueStats OBJECT-TYPE
SYNTAX QosStatsClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the value of the Stats.Clear(0)."
::= { qosStatsClearQueueEntry 3 }
-- Running Stats information
qosStatsRunStaticsObjects OBJECT IDENTIFIER ::= { stats 3 }
-- Policy Stats,policy Running Stats information
qosStatsCbPolicyRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsCbPolicyRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running Stats for Policy in a QoS policy applied on the interface."
::= { qosStatsRunStaticsObjects 1 }
qosStatsCbPolicyRunInfoEntry OBJECT-TYPE
SYNTAX QosStatsCbPolicyRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy Stats information entry."
INDEX { qosStatsCbPolicyIfIndex,
qosStatsCbPolicyDirection,
qosStatsPolicyClassIndex }
::= { qosStatsCbPolicyRunInfoTable 1 }
QosStatsCbPolicyRunInfoEntry ::=
SEQUENCE
{
qosStatsCbPolicyIfIndex
Integer32,
qosStatsCbPolicyDirection
DirectionType,
qosStatsPolicyClassIndex
Integer32,
qosStatsPolicyGreenPackets
Counter64,
qosStatsPolicyGreenBytes
Counter64,
qosStatsPolicyRedPackets
Counter64,
qosStatsPolicyRedBytes
Counter64,
qosStatsPolicyYellowPackets
Counter64,
qosStatsPolicyYellowBytes
Counter64,
qosStatsPolicyClassBasedPkts
Counter64,
qosStatsPolicyClassBasedBytes
Counter64
}
qosStatsCbPolicyIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index, equal to ifIndex."
::= { qosStatsCbPolicyRunInfoEntry 1 }
qosStatsCbPolicyDirection OBJECT-TYPE
SYNTAX DirectionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy direction:
inbound (1)
outbound (2)
"
::= { qosStatsCbPolicyRunInfoEntry 2 }
qosStatsPolicyClassIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PolicyClass Index in a QoS policy."
::= { qosStatsCbPolicyRunInfoEntry 3 }
qosStatsPolicyGreenPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green packets."
::= { qosStatsCbPolicyRunInfoEntry 4 }
qosStatsPolicyGreenBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green bytes."
::= { qosStatsCbPolicyRunInfoEntry 5 }
qosStatsPolicyRedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red packets."
::= { qosStatsCbPolicyRunInfoEntry 6 }
qosStatsPolicyRedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red bytes."
::= { qosStatsCbPolicyRunInfoEntry 7 }
qosStatsPolicyYellowPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of yellow packets."
::= { qosStatsCbPolicyRunInfoEntry 8 }
qosStatsPolicyYellowBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of yellow bytes."
::= { qosStatsCbPolicyRunInfoEntry 9 }
qosStatsPolicyClassBasedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of policy class matching packets."
::= { qosStatsCbPolicyRunInfoEntry 10 }
qosStatsPolicyClassBasedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of policy class matching bytes."
::= { qosStatsCbPolicyRunInfoEntry 11 }
-- Port policy: policy Running Stats information on port
qosStatsPortPolicyRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsPortPolicyRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running Stats in a QoS policy applied on the port."
::= { qosStatsRunStaticsObjects 2 }
qosStatsPortPolicyRunInfoEntry OBJECT-TYPE
SYNTAX QosStatsPortPolicyRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy Stats information entry."
INDEX { qosStatsCbPolicyIfIndex,
qosStatsCbPolicyDirection }
::= { qosStatsPortPolicyRunInfoTable 1 }
QosStatsPortPolicyRunInfoEntry ::=
SEQUENCE
{
qosStatsPortPolicyIfIndex
Integer32,
qosStatsPortPolicyDirection
DirectionType,
qosStatsPortPolicyConfirmPackets
Counter64,
qosStatsPortPolicyConfirmBytes
Counter64,
qosStatsPortPolicyNoConfirmPackets
Counter64,
qosStatsPortPolicyNoConfirmBytes
Counter64
}
qosStatsPortPolicyIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index, equal to ifIndex."
::= { qosStatsPortPolicyRunInfoEntry 1 }
qosStatsPortPolicyDirection OBJECT-TYPE
SYNTAX DirectionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy direction:
inbound (1)
outbound (2)
"
::= { qosStatsPortPolicyRunInfoEntry 2 }
qosStatsPortPolicyConfirmPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green packets."
::= { qosStatsPortPolicyRunInfoEntry 3 }
qosStatsPortPolicyConfirmBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green bytes."
::= { qosStatsPortPolicyRunInfoEntry 4 }
qosStatsPortPolicyNoConfirmPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red packets."
::= { qosStatsPortPolicyRunInfoEntry 5 }
qosStatsPortPolicyNoConfirmBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red bytes."
::= { qosStatsPortPolicyRunInfoEntry 6 }
-- Queue Stats
qosStatsIfQueueRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsIfQueueRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running Stats for queue
in a QoS policy applied on the interface."
::= { qosStatsRunStaticsObjects 3 }
qosStatsIfQueueRunInfoEntry OBJECT-TYPE
SYNTAX QosStatsIfQueueRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue Stats entry."
INDEX { qosStatsQueueIfIndex,
qosStatsQueueID }
::= { qosStatsIfQueueRunInfoTable 1 }
QosStatsIfQueueRunInfoEntry ::=
SEQUENCE
{
qosStatsQueueIfIndex
Integer32,
qosStatsQueueID
Integer32,
qosStatsIfQueueTransmittedPackets
Counter64,
qosStatsIfQueueTransmittedBytes
Counter64,
qosStatsIfQueueDropPackets
Counter64,
qosStatsIfQueueDropBytes
Counter64
}
qosStatsQueueIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index, equal to ifIndex."
::= { qosStatsIfQueueRunInfoEntry 1 }
qosStatsQueueID OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue ID. Range <0-7>."
::= { qosStatsIfQueueRunInfoEntry 2 }
qosStatsIfQueueTransmittedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets enqueued."
::= { qosStatsIfQueueRunInfoEntry 3 }
qosStatsIfQueueTransmittedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes enqueued."
::= { qosStatsIfQueueRunInfoEntry 4 }
qosStatsIfQueueDropPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number of packets discarded when enqueued by tail-drop/wred method. It's zero if the system does not support queue drop statistics."
::= { qosStatsIfQueueRunInfoEntry 5 }
qosStatsIfQueueDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number of bytes discarded when enqueued by tail-drop/wred method.
It's zero if the system does not support queue drop statistics."
::= { qosStatsIfQueueRunInfoEntry 6 }
qosStatsCbPolicyAceBasedRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsCbPolicyAceBasedRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running Stats for matching QoS policy Ace applied on the interface. The matching ace statistics is only for match-any class-map in policy-map"
::= { qosStatsRunStaticsObjects 4 }
qosStatsCbPolicyAceBasedRunInfoEntry OBJECT-TYPE
SYNTAX QosStatsCbPolicyAceBasedRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy Stats information entry."
INDEX { qosStatsCbAceBasedIfIndex,
qosStatsCbAceBasedDirection,
qosStatsCbAceBasedPolicyClassIndex,
qosStatsCbAceBasedMatchRuleIndex,
qosStatsCbAceBasedAclGroupRuleIndex }
::= { qosStatsCbPolicyAceBasedRunInfoTable 1 }
QosStatsCbPolicyAceBasedRunInfoEntry ::=
SEQUENCE
{
qosStatsCbAceBasedIfIndex
Integer32,
qosStatsCbAceBasedDirection
DirectionType,
qosStatsCbAceBasedPolicyClassIndex
Integer32,
qosStatsCbAceBasedMatchRuleIndex
Integer32,
qosStatsCbAceBasedAclGroupRuleIndex
Integer32,
qosStatsCbAceBasedPkts
Counter64,
qosStatsCbAceBasedBytes
Counter64
}
qosStatsCbAceBasedIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface Index, equal to ifIndex."
::= { qosStatsCbPolicyAceBasedRunInfoEntry 1 }
qosStatsCbAceBasedDirection OBJECT-TYPE
SYNTAX DirectionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy direction:
inbound (1)
outbound (2)
"
::= { qosStatsCbPolicyAceBasedRunInfoEntry 2 }
qosStatsCbAceBasedPolicyClassIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PolicyClass index in policy-map."
::= { qosStatsCbPolicyAceBasedRunInfoEntry 3 }
qosStatsCbAceBasedMatchRuleIndex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Match rule index in Class-map."
::= { qosStatsCbPolicyAceBasedRunInfoEntry 4 }
qosStatsCbAceBasedAclGroupRuleIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483646)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rule index(sequence num in cli) in acl Group. "
::= { qosStatsCbPolicyAceBasedRunInfoEntry 5 }
qosStatsCbAceBasedPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets matching ace in policy-map."
::= { qosStatsCbPolicyAceBasedRunInfoEntry 6 }
qosStatsCbAceBasedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bytes of packets matching ace in policy-map."
::= { qosStatsCbPolicyAceBasedRunInfoEntry 7 }
-- Agg Policy Stats,policy Running Stats information
qosStatsAggPolicyRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsAggPolicyRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running Stats in a QoS aggregate policy applied on the interface."
::= { qosStatsRunStaticsObjects 5 }
qosStatsAggPolicyRunInfoEntry OBJECT-TYPE
SYNTAX QosStatsAggPolicyRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aggregate Policy Stats information entry."
INDEX { qosStatsAggPolicyIndex }
::= { qosStatsAggPolicyRunInfoTable 1 }
QosStatsAggPolicyRunInfoEntry ::=
SEQUENCE
{
qosStatsAggPolicyIndex
Integer32,
qosStatsAggPolicyRedPackets
Counter64,
qosStatsAggPolicyRedBytes
Counter64,
qosStatsAggPolicyGreenPackets
Counter64,
qosStatsAggPolicyGreenBytes
Counter64,
qosStatsAggPolicyYellowPackets
Counter64,
qosStatsAggPolicyYellowBytes
Counter64
}
qosStatsAggPolicyIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of aggregate-policer."
::= { qosStatsAggPolicyRunInfoEntry 1 }
qosStatsAggPolicyRedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red packets."
::= { qosStatsAggPolicyRunInfoEntry 2 }
qosStatsAggPolicyRedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red bytes."
::= { qosStatsAggPolicyRunInfoEntry 3 }
qosStatsAggPolicyGreenPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green packets."
::= { qosStatsAggPolicyRunInfoEntry 4 }
qosStatsAggPolicyGreenBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green bytes."
::= { qosStatsAggPolicyRunInfoEntry 5 }
qosStatsAggPolicyYellowPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of yellow packets."
::= { qosStatsAggPolicyRunInfoEntry 6 }
qosStatsAggPolicyYellowBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of yellow bytes."
::= { qosStatsAggPolicyRunInfoEntry 7 }
-- Sub Module: IGSP
EnabledStatus::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simpleStatus value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
-- ==================================================================
--
-- ======================= definition begin =========================
--
-- ==================================================================
lswIgmpsnoopingMibObject OBJECT IDENTIFIER ::= { igsp 1 }
lswIgmpsnoopingTrap OBJECT IDENTIFIER ::= { igsp 2 }
igmpSnoopingStatus OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable IGMP Snooping.
enable(1)
disable(2)"
::= { lswIgmpsnoopingMibObject 1 }
igmpSnoopingFastLeaveStatus OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable IGMP Snooping Fast Leave.
enable(1)
disable(2)"
::= { lswIgmpsnoopingMibObject 2 }
igmpSnoopingVersion OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure to set IGMP Snooping Version."
::= { lswIgmpsnoopingMibObject 3 }
igmpSnoopingMaxMemberNumber OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure the max member number."
::= { lswIgmpsnoopingMibObject 4 }
igmpSnoopingDiscardUnknownstatus OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable IGMP Snooping Discard unknown multicast traffic.
enable(1)
disable(2)"
::= { lswIgmpsnoopingMibObject 5 }
igmpSnoopingReportSuppressionStatus OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable IGMP Snooping Report-Suppression.
enable(1)
disable(2)"
::= { lswIgmpsnoopingMibObject 6 }
igmpSnoopingLastMemberQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1000..25500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure to set IGMP Snooping Last Member Query Interval. Interval range 1000~25500."
::= { lswIgmpsnoopingMibObject 7 }
igmpSnoopingQueryInterval OBJECT-TYPE
SYNTAX INTEGER (2..18000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure to set IGMP Snooping Query Interval.Must more than query max response time. Interval range 2~18000."
::= { lswIgmpsnoopingMibObject 8 }
igmpSnoopingQueryMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure to set IGMP Snooping Query Max Response Time.Time range 1~25."
::= { lswIgmpsnoopingMibObject 9 }
igmpSnoopingVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains, one entry per vlan,
infomation about the IGMP Snooping."
::= { lswIgmpsnoopingMibObject 10 }
igmpSnoopingVlanEntry OBJECT-TYPE
SYNTAX IgmpSnoopingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the
IGMP Snooping on vlan."
INDEX { igmpSnoopingVlanID }
::= { igmpSnoopingVlanTable 1 }
IgmpSnoopingVlanEntry ::= SEQUENCE {
igmpSnoopingVlanID
Integer32,
igmpSnoopingVlanEnabled
EnabledStatus,
igmpSnoopingVlanFastLeaveStatus
EnabledStatus,
igmpSnoopingVlanReportSuppressionStatus
EnabledStatus,
igmpSnoopingVlanVersion
INTEGER,
igmpSnoopingVlanMaxMemberNumber
INTEGER,
igmpSnoopingVlanDiscardUnknownStatus
EnabledStatus,
igmpSnoopingVlanGroupAccesslist
OCTET STRING,
igmpSnoopingVlanLastMemberQueryInterval
INTEGER,
igmpSnoopingVlanQuerier
EnabledStatus,
igmpSnoopingVlanQuerierOperationalAddress
IpAddress,
igmpSnoopingVlanQuerierConfigureAddress
IpAddress,
igmpSnoopingVlanQuerierTimeout
INTEGER,
igmpSnoopingVlanQueryInterval
INTEGER,
igmpSnoopingVlanQueryMaxResponseTime
INTEGER,
igmpSnoopingVlanStatusGrpJoinsCnt
Counter32,
igmpSnoopingVlanStatusGrpLeavesCnt
Counter32,
igmpSnoopingVlanStatusV1QuerierWCnt
Counter32,
igmpSnoopingVlanStatusV2QuerierWCnt
Counter32,
igmpSnoopingVlanStatusResetCounters
INTEGER,
igmpSnoopingVlanGrpNum
INTEGER,
igmpSnoopingVlanElectedQuerierAddress
IpAddress
}
igmpSnoopingVlanID OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index uniquely identifies the VLAN id which IGMP
snooping is enabled or disabled."
::= { igmpSnoopingVlanEntry 1 }
igmpSnoopingVlanEnabled OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicating whether IGMP snooping is enabled on this VLAN.
enable(1)
disable(2)"
-- DEFVAL { enabled }
::= { igmpSnoopingVlanEntry 2 }
igmpSnoopingVlanFastLeaveStatus OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable IGMP Snooping Fast Leave on VLAN,
enable(1)
disable(2)."
::= { igmpSnoopingVlanEntry 3 }
igmpSnoopingVlanReportSuppressionStatus OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable IGMP Snooping Report-Suppression on VLAN.
enable(1)
disable(2)"
::= { igmpSnoopingVlanEntry 4 }
igmpSnoopingVlanVersion OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set IGMP Snooping Version on VLAN.Version range 1~3."
::= { igmpSnoopingVlanEntry 5 }
igmpSnoopingVlanMaxMemberNumber OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the max member number on VLAN.Range 1~8192."
::= { igmpSnoopingVlanEntry 6 }
igmpSnoopingVlanDiscardUnknownStatus OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable IGMP Snooping Discard unknown multicast traffic on VLAN.
enable(1)
disable(2)"
::= { igmpSnoopingVlanEntry 7 }
igmpSnoopingVlanGroupAccesslist OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the IGMP Snooping Group Acess-list on VLAN."
::= { igmpSnoopingVlanEntry 8 }
igmpSnoopingVlanLastMemberQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1000..25500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set IGMP Snooping Last Member Query Interval on VLAN. Interval range 1000~25500."
::= { igmpSnoopingVlanEntry 10 }
igmpSnoopingVlanQuerier OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to Enable or Disable IGMP Snooping Querier on VLAN.
enable(1)
disable(2)"
::= { igmpSnoopingVlanEntry 11 }
igmpSnoopingVlanQuerierOperationalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configure to get IGMP Snooping Querier Operational Adress on VLAN."
::= { igmpSnoopingVlanEntry 12 }
igmpSnoopingVlanQuerierConfigureAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set IGMP Snooping Querier Configure Adress on VLAN."
::= { igmpSnoopingVlanEntry 13 }
igmpSnoopingVlanQuerierTimeout OBJECT-TYPE
SYNTAX INTEGER (60..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set IGMP Snooping Querier Timeout value on VLAN. Timeout range 60~300. "
::= { igmpSnoopingVlanEntry 14 }
igmpSnoopingVlanQueryInterval OBJECT-TYPE
SYNTAX INTEGER (2..18000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set IGMP Snooping Query Interval on VLAN. Query interval should be greater than Query Response Interval. Interval range 2~18000."
::= { igmpSnoopingVlanEntry 15 }
igmpSnoopingVlanQueryMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set IGMP Snooping Query Max Response Time on VLAN."
::= { igmpSnoopingVlanEntry 16 }
igmpSnoopingVlanStatusGrpJoinsCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Configure to get IGMP Snooping Group Joins Count on VLAN."
::= { igmpSnoopingVlanEntry 17 }
igmpSnoopingVlanStatusGrpLeavesCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Configure to get IGMP Snooping Group Leaves Count on VLAN."
::= { igmpSnoopingVlanEntry 18 }
igmpSnoopingVlanStatusV1QuerierWCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Configure to get IGMP Snooping Group V1-Querier Warnings Count on VLAN."
::= { igmpSnoopingVlanEntry 19 }
igmpSnoopingVlanStatusV2QuerierWCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Configure to get IGMP Snooping Group V2-Querier Warnings Count on VLAN."
::= { igmpSnoopingVlanEntry 20 }
igmpSnoopingVlanStatusResetCounters OBJECT-TYPE
SYNTAX INTEGER {
reset(1)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Configure to reset IGMP SnoopingStatus Counters on VLAN.
1 reset."
::= { igmpSnoopingVlanEntry 21 }
igmpSnoopingVlanGrpNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configure to get IGMP Snooping group number on VLAN."
::= { igmpSnoopingVlanEntry 22 }
igmpSnoopingVlanElectedQuerierAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configure to get IGMP Snooping Elected Querier Adress on VLAN."
::= { igmpSnoopingVlanEntry 23 }
igmpSnoopingMrouterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopingMrouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about igmp snooping mrouter port list
per vlan."
::= { lswIgmpsnoopingMibObject 11 }
igmpSnoopingMrouterPortEntry OBJECT-TYPE
SYNTAX IgmpSnoopingMrouterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about IGMP Snooping Mrouter Port on VLAN."
INDEX { igmpSnoopingVlanid, igmpSnoopingmrouterPort}
::= { igmpSnoopingMrouterPortTable 1 }
IgmpSnoopingMrouterPortEntry ::=
SEQUENCE {
igmpSnoopingVlanid
Integer32,
igmpSnoopingmrouterPort
Integer32,
igmpSnoopingmrouterPortRowStatus
RowStatus
}
igmpSnoopingVlanid OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN identifier of this mrouter port."
::= { igmpSnoopingMrouterPortEntry 1 }
igmpSnoopingmrouterPort OBJECT-TYPE
SYNTAX Integer32 (1..1152)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"mrouter port ifindex .
1~1024 is switch port, 1025~1151 is agg port(agg1~127)."
::= { igmpSnoopingMrouterPortEntry 2 }
igmpSnoopingmrouterPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { igmpSnoopingMrouterPortEntry 3 }
igmpSnoopingGrpNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configure to get IGMP Snooping total group number."
::= { lswIgmpsnoopingMibObject 12 }
igmpSnoopingGrplimitReach NOTIFICATION-TYPE
OBJECTS { configSave }
STATUS current
DESCRIPTION
"Igmp snooping group record reaches total limit"
::= { lswIgmpsnoopingTrap 1 }
igmpSnoopingVlanGrplimitReach NOTIFICATION-TYPE
OBJECTS { configSave }
STATUS current
DESCRIPTION
"Igmp snooping group record reaches limit on vlan"
::= { lswIgmpsnoopingTrap 2 }
igmpSnoopingVlanQuerierSwitch NOTIFICATION-TYPE
OBJECTS { igmpSnoopingVlanQuerierOperationalAddress }
STATUS current
DESCRIPTION
"Igmp snooping group querier changes"
::= { lswIgmpsnoopingTrap 3 }
-- Sub Module: LINKAGG
--
-- for load balance
--
linkAggLoadBalance OBJECT-TYPE
SYNTAX BITS {
dst-mac(0),
src-mac(1),
src-ip(2),
dst-ip(3),
src-port(4),
dst-port(5),
ip-protocol(6),
vxlan-vni(7),
nvgre-vsid(8),
inner-dst-mac(9),
inner-src-mac(10),
inner-src-ip(11),
inner-dst-ip(12),
inner-src-port(13),
inner-dst-port(14),
inner-ip-protocol(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config load balance.
1 dst-mac.
2 src-mac.
3 src-ip.
4 dst-ip.
5 src-port.
6 dst-port.
7 ip-protocol.
8 vxlan-vni.
9 nvgre-vsid.
10 inner-dst-mac.
11 inner-src-mac.
12 inner-src-ip.
13 inner-dst-ip.
14 inner-src-port.
15 inner-dst-port.
16 inner-ip-protocol."
::= { linkAgg 1 }
lacpObject OBJECT IDENTIFIER ::= { linkAgg 2 }
--
-- config lacp system priority
--
lacpSysPriorityCfg OBJECT IDENTIFIER ::= { lacpObject 1 }
lacpSysPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config lacp system priority."
::= { lacpSysPriorityCfg 1 }
--
-- config channel group on port
--
lacpIfCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for lacp configuration on interface."
::= { lacpObject 2 }
lacpIfCfgEntry OBJECT-TYPE
SYNTAX LacpIfCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for lacp configuration on interface."
INDEX
{
lacpIfCfgAdminAggNumber, ifIndex
}
::= { lacpIfCfgTable 1 }
LacpIfCfgEntry ::=
SEQUENCE
{
lacpIfCfgAdminAggNumber
Integer32,
lacpIfCfgMode
INTEGER,
lacpIfCfgRowStatus
RowStatus
}
lacpIfCfgAdminAggNumber OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Config channel group number."
::= { lacpIfCfgEntry 1 }
lacpIfCfgMode OBJECT-TYPE
SYNTAX INTEGER
{
passive(1),
active(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The channel group mode."
::= { lacpIfCfgEntry 2 }
lacpIfCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { lacpIfCfgEntry 3 }
--
-- config lacp parameter on port
--
lacpIfCfgParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpIfCfgParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for lacp configuration on interface."
::= { lacpObject 3 }
lacpIfCfgParaEntry OBJECT-TYPE
SYNTAX LacpIfCfgParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for lacp configuration on interface."
INDEX
{
ifIndex
}
::= { lacpIfCfgParaTable 1 }
LacpIfCfgParaEntry ::=
SEQUENCE {
lacpIfCfgParaPriority
Integer32,
lacpIfCfgParaTimeOut
INTEGER
}
lacpIfCfgParaPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config lacp priority on interface."
::= { lacpIfCfgParaEntry 1 }
lacpIfCfgParaTimeOut OBJECT-TYPE
SYNTAX INTEGER
{
short(1),
long(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config lacp expire timer on interface."
::= { lacpIfCfgParaEntry 2 }
--
-- display port state
--
lacpPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for displaying port state of interface."
::= { lacpObject 4 }
lacpPortStateEntry OBJECT-TYPE
SYNTAX LacpPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for lacp configuration on interface."
INDEX
{
lacpPortStateGroupNum, ifIndex
}
::= { lacpPortStateTable 1 }
LacpPortStateEntry ::=
SEQUENCE {
lacpPortStateGroupNum
Integer32,
lacpPortState
OCTET STRING
}
lacpPortStateGroupNum OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Display port state."
::= { lacpPortStateEntry 1 }
lacpPortState OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display port state."
::= { lacpPortStateEntry 2 }
--
-- display lacp actor state
--
lacpActorStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpActorStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for displaying actor state."
::= { lacpObject 5 }
lacpActorStateEntry OBJECT-TYPE
SYNTAX LacpActorStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for displaying actor state."
INDEX
{
lacpActorGroupNum, ifIndex
}
::= { lacpActorStateTable 1 }
LacpActorStateEntry ::=
SEQUENCE {
lacpActorGroupNum
Integer32,
lacpActorSystemId
OCTET STRING,
lacpActorPortNum
Integer32,
lacpActorPortTransitPduType
OCTET STRING,
lacpActorPortMode
OCTET STRING,
lacpActorPortPriority
Integer32,
lacpActorPortOperKey
Integer32,
lacpActorPortStatsFlag
OCTET STRING,
lacpActorPortActivity
OCTET STRING,
lacpActorPortTimeout
OCTET STRING,
lacpActorPortAggregation
OCTET STRING,
lacpActorPortSynchronization
OCTET STRING,
lacpActorPortCollecting
OCTET STRING,
lacpActorPortDistributing
OCTET STRING,
lacpActorPortDefaulted
OCTET STRING,
lacpActorPortExpired
OCTET STRING
}
lacpActorGroupNum OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Display actor group number."
::= { lacpActorStateEntry 1 }
lacpActorSystemId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor system id."
::= { lacpActorStateEntry 2 }
lacpActorPortNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port number."
::= { lacpActorStateEntry 3 }
lacpActorPortTransitPduType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port number. It should be 'fast' or 'slow'. "
::= { lacpActorStateEntry 4 }
lacpActorPortMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port mode. It should be 'active' or 'passive'."
::= { lacpActorStateEntry 5 }
lacpActorPortPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port priority."
::= { lacpActorStateEntry 6 }
lacpActorPortOperKey OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port operate key."
::= { lacpActorStateEntry 7 }
lacpActorPortStatsFlag OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port stats flag."
::= { lacpActorStateEntry 8 }
lacpActorPortActivity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port activity. It should be 'active' or 'passive'."
::= { lacpActorStateEntry 9 }
lacpActorPortTimeout OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..5))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port timeout. It should be 'short' or 'long'."
::= { lacpActorStateEntry 10 }
lacpActorPortAggregation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port number. It should be 'yes' or 'no'."
::= { lacpActorStateEntry 11 }
lacpActorPortSynchronization OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port synchronization. It should be 'yes' or 'no'."
::= { lacpActorStateEntry 12 }
lacpActorPortCollecting OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port collecting. It should be 'yes' or 'no'."
::= { lacpActorStateEntry 13 }
lacpActorPortDistributing OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port distributing. It should be 'yes' or 'no'."
::= { lacpActorStateEntry 14 }
lacpActorPortDefaulted OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port defaulted. It should be 'yes' or 'no'."
::= { lacpActorStateEntry 15 }
lacpActorPortExpired OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display actor port expired . It should be 'yes' or 'no'."
::= { lacpActorStateEntry 16 }
--
-- display lacp neighbor state
--
lacpNeighborStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpNeighborStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for displaying neighbor state."
::= { lacpObject 6 }
lacpNeighborStateEntry OBJECT-TYPE
SYNTAX LacpNeighborStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for displaying neighbor state."
INDEX
{
lacpNeighborGroupNum, ifIndex
}
::= { lacpNeighborStateTable 1 }
LacpNeighborStateEntry ::=
SEQUENCE {
lacpNeighborGroupNum
Integer32,
lacpNeighborSystemId
OCTET STRING,
lacpNeighborPortNum
Integer32,
lacpNeighborPortTransitPduType
OCTET STRING,
lacpNeighborPortMode
OCTET STRING,
lacpNeighborPortPriority
Integer32,
lacpNeighborOperKey
Integer32,
lacpNeighborPortStatsFlag
OCTET STRING,
lacpNeighborPortActivity
OCTET STRING,
lacpNeighborPortTimeout
OCTET STRING,
lacpNeighborPortAggregation
OCTET STRING,
lacpNeighborPortSynchronization
OCTET STRING,
lacpNeighborPortCollecting
OCTET STRING,
lacpNeighborPortDistributing
OCTET STRING,
lacpNeighborPortDefaulted
OCTET STRING,
lacpNeighborPortExpired
OCTET STRING
}
lacpNeighborGroupNum OBJECT-TYPE
SYNTAX Integer32(1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"display neighbor group number."
::= { lacpNeighborStateEntry 1 }
lacpNeighborSystemId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor system id."
::= { lacpNeighborStateEntry 2 }
lacpNeighborPortNum OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor port number."
::= { lacpNeighborStateEntry 3 }
lacpNeighborPortTransitPduType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor port transmit pdu. It should be 'fast' or 'slow'."
::= { lacpNeighborStateEntry 4 }
lacpNeighborPortMode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor port mode. It should be 'active' or 'passive'."
::= { lacpNeighborStateEntry 5 }
lacpNeighborPortPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor port number."
::= { lacpNeighborStateEntry 6 }
lacpNeighborOperKey OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor operational key."
::= { lacpNeighborStateEntry 7 }
lacpNeighborPortStatsFlag OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag."
::= { lacpNeighborStateEntry 8 }
lacpNeighborPortActivity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'active' or 'passive'."
::= { lacpNeighborStateEntry 9 }
lacpNeighborPortTimeout OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..5))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'short' or 'long'."
::= { lacpNeighborStateEntry 10 }
lacpNeighborPortAggregation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'yes' or 'no'."
::= { lacpNeighborStateEntry 11 }
lacpNeighborPortSynchronization OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'yes' or 'no'."
::= { lacpNeighborStateEntry 12 }
lacpNeighborPortCollecting OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'yes' or 'no'."
::= { lacpNeighborStateEntry 13 }
lacpNeighborPortDistributing OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'yes' or 'no'."
::= { lacpNeighborStateEntry 14 }
lacpNeighborPortDefaulted OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'yes' or 'no'."
::= { lacpNeighborStateEntry 15 }
lacpNeighborPortExpired OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor stats flag. It should be 'yes' or 'no'."
::= { lacpNeighborStateEntry 16 }
--
--
--
lacpCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for displaying neighbor state."
::= { lacpObject 7 }
lacpCounterEntry OBJECT-TYPE
SYNTAX LacpCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for displaying neighbor state."
INDEX
{
lacpCounterGroupNum
}
::= { lacpCounterTable 1 }
LacpCounterEntry ::=
SEQUENCE
{
lacpCounterGroupNum
Integer32,
lacpCounterSendPduCnt
Integer32,
lacpCounterRecvPduCnt
Integer32,
lacpCounterSendErrPktCnt
Integer32,
lacpCounterRecvErrPktCnt
Integer32
}
lacpCounterGroupNum OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Display lacp group number."
::= { lacpCounterEntry 1 }
lacpCounterSendPduCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display lacp send pdu counts."
::= { lacpCounterEntry 2 }
lacpCounterRecvPduCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor receive pdu counts."
::= { lacpCounterEntry 3 }
lacpCounterSendErrPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor send error packet counts."
::= { lacpCounterEntry 4 }
lacpCounterRecvErrPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display neighbor recevie error packet counts."
::= { lacpCounterEntry 5 }
--
-- clear lacp counter
--
lacpClearCntCfg OBJECT IDENTIFIER ::= { lacpObject 8 }
lacpClearCounter OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear lacp counter. The system will clear all lacp's couter if the value is '0'."
::= { lacpClearCntCfg 1 }
staticLinkAggObject OBJECT IDENTIFIER ::= { linkAgg 3 }
--
--
-- static link aggregation table
--
staticLinkAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the link aggregator number, name and
configure type and memberlist."
::= { staticLinkAggObject 1 }
staticLinkAggEntry OBJECT-TYPE
SYNTAX StaticLinkAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the link aggregator number, name and configure type
and memberlist."
INDEX {
staticLinkAggNumber,
ifIndex
}
::= { staticLinkAggTable 1 }
StaticLinkAggEntry ::=
SEQUENCE {
staticLinkAggNumber
Integer32,
staticLinkAggIndex
Integer32,
staticLinkAggName
OCTET STRING,
staticLinkAggMemberIndex
Integer32,
staticLinkAggMemberName
OCTET STRING,
staticLinkAggMemberEnable
INTEGER,
staticLinkAggMemberRowStatus
RowStatus
}
staticLinkAggNumber OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number of Link aggregator interface.This is the index of Link
Aggregator table."
::= { staticLinkAggEntry 1 }
staticLinkAggIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of link aggregator interface."
::= { staticLinkAggEntry 2 }
staticLinkAggName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of link aggregator interface."
::= { staticLinkAggEntry 3 }
staticLinkAggMemberIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of interface member added to link aggregator."
::= { staticLinkAggEntry 4 }
staticLinkAggMemberName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of interface member added to link aggregator."
::= { staticLinkAggEntry 5 }
staticLinkAggMemberEnable OBJECT-TYPE
SYNTAX INTEGER
{
down(0),
bundle(1),
adminDown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The member is Bundle when the value is 1.
the member is down when the value is 0.
the member is admin down when the value is 2."
::= { staticLinkAggEntry 6 }
staticLinkAggMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { staticLinkAggEntry 7 }
-- Sub Module: QBRIDGEEXT
VlanIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d "
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted.If the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention).If the value is greater than 4095,
then it represents a VLAN with scope local to the
particular agent, i.e., one without a global VLAN-ID
assigned to it.Such VLANs are outside the scope of
IEEE 802.1Q, but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
VlanList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
VLANs."
SYNTAX OCTET STRING (SIZE(0..256))
VlanClassRuleIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d "
STATUS current
DESCRIPTION
"A value used to index vlan class rule tables: values of 0 to
4095 are permitted."
SYNTAX INTEGER (0..4095)
VlanClassGroupIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d "
STATUS current
DESCRIPTION
"A value used to index vlan class group tables: values of 0 to
31 are permitted."
SYNTAX INTEGER (0..31)
VlanClassProtocol ::= TEXTUAL-CONVENTION
-- DISPLAY-HINT "d "
STATUS current
DESCRIPTION
"A value used to index vlan class Protocols."
SYNTAX INTEGER
{
ip(1),
ipv4(2),
ipv6(3),
mpls(4),
mplsmcast(5),
arp(6),
rarp(7),
pppoe(11)
}
VlanClassEnableBase ::= TEXTUAL-CONVENTION
-- DISPLAY-HINT "d "
STATUS current
DESCRIPTION
"A value used to index vlan class enable based."
SYNTAX INTEGER
{
mac(1),
ip(2),
protocol(4)
}
VlanClassIpv6Address ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:"
STATUS current
DESCRIPTION
"This data type is used to model IPv6 addresses.
This is a binary string of 16 octets in network byte-order."
SYNTAX OCTET STRING (SIZE (16))
--
-- groups in the QBRIDGEEXT MIB
--
vlanExt OBJECT IDENTIFIER ::= { qBridgeExt 1 }
fdbExt OBJECT IDENTIFIER ::= { qBridgeExt 2 }
vlanClass OBJECT IDENTIFIER ::= { qBridgeExt 3 }
--
-- vlanExt group
--
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about VLAN entries
of the device."
::= { vlanExt 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific VLAN of the device."
INDEX { vlanIndex }
::= { vlanTable 1 }
VlanEntry ::=
SEQUENCE {
vlanIndex
VlanIndex,
vlanName
OCTET STRING,
vlanStatus
INTEGER,
vlanRowStatus
RowStatus ,
vlanIfConfig
INTEGER,
vlanStatsPktIn
Counter64,
vlanStatsPktOut
Counter64,
vlanStatsByteIn
Counter64,
vlanStatsByteOut
Counter64,
vlanStatsEn
INTEGER
}
vlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An forward ID, which may be same as VLAN ID in IVL mode."
::= { vlanEntry 1 }
vlanName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used to identify the VLAN."
::= { vlanEntry 2 }
vlanStatus OBJECT-TYPE
SYNTAX INTEGER{
inactive(1),
active(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An administratively VLANStatus .
1 Inactive;
2 Active(2)."
::= { vlanEntry 3 }
vlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1)."
::= { vlanEntry 4 }
vlanIfConfig OBJECT-TYPE
SYNTAX INTEGER
{
create(1),
destroy(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object create/destroy vlan interface.
1 Create.
2 Destroy."
::= { vlanEntry 5 }
vlanStatsPktIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packtes number of Vlan."
::= { vlanEntry 7 }
vlanStatsPktOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packtes number of Vlan."
::= { vlanEntry 8 }
vlanStatsByteIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of Vlan."
::= { vlanEntry 9 }
vlanStatsByteOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of Vlan."
::= { vlanEntry 10 }
vlanStatsEn OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize Active(1) and Inactive(0)."
::= { vlanEntry 11 }
portVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about interface's VLAN properties."
::= { vlanExt 2 }
portVlanEntry OBJECT-TYPE
SYNTAX PortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific interface's VLAN properties."
INDEX { ifIndex }
::= { portVlanTable 1 }
PortVlanEntry ::=
SEQUENCE {
vlanTagType
INTEGER,
pvid
INTEGER,
ingressFilter
INTEGER,
allowedVlans
VlanList,
allowedVlanAdd
VlanList,
allowedVlanDel
VlanList
}
vlanTagType OBJECT-TYPE
SYNTAX INTEGER{
all(1),
qinq(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"all(1) -- trunk mode
qinq(2) -- qinq mode
untagged(3) -- access mode."
::= { portVlanEntry 1 }
pvid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used to identify the VLAN.
Vid range is 2~4094."
::= { portVlanEntry 2 }
ingressFilter OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used to identify the VLAN.
1 Enable.
2 Disable."
::= { portVlanEntry 3 }
allowedVlans OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN list of this port, should use the 3 format below:
all - all VLANs in the VLAN database
none - none VLAN
string such as 1,3,10-20,4094
"
::= { portVlanEntry 4 }
allowedVlanAdd OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN list to add to this port, string such as 1,3,10-20,4094.
Use for set node, when get node return meaningless."
::= { portVlanEntry 5 }
allowedVlanDel OBJECT-TYPE
SYNTAX VlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN list to remove from this port, string such as 1,3,10-20,4094.
Use for set node, when get node return meaningless."
::= { portVlanEntry 6 }
vlanReplaceDscpExpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanReplaceDscpExpEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table that contains information about VLAN Replace Dscp/Exp
of the device.
Not support on this version"
::= { vlanExt 3 }
vlanReplaceDscpExpEntry OBJECT-TYPE
SYNTAX VlanReplaceDscpExpEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Information about a specific VLAN of the device."
INDEX { vlanReplaceDscpExpIndex }
::= { vlanReplaceDscpExpTable 1 }
VlanReplaceDscpExpEntry ::=
SEQUENCE {
vlanReplaceDscpExpIndex
VlanIndex,
vlanReplaceDscpExpEn
INTEGER
}
vlanReplaceDscpExpIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Index of VLAN ID in IVL mode."
::= { vlanReplaceDscpExpEntry 1 }
vlanReplaceDscpExpEn OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"Status of replace the dscp/exp field in packets on egress for specified VLAN..
1 replace dscp/exp;
2 do not replace dscp/exp."
DEFVAL { disable }
::= { vlanReplaceDscpExpEntry 2 }
--
-- fdbExt group
--
unicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF UnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.This information is used by the
transparent bridging function in determining how to
propagate a received frame."
::= { fdbExt 1 }
unicastEntry OBJECT-TYPE
SYNTAX UnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information."
INDEX { vlanIndex, unicastAddress , fdbPort}
::= { unicastTable 1 }
UnicastEntry ::=
SEQUENCE {
unicastVID
VlanIndex,
unicastAddress
MacAddress,
fdbPort
INTEGER,
fdbStatus
INTEGER,
fdbRowStatus
RowStatus
}
unicastVID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN identifier of this FDB entry."
::= { unicastEntry 1 }
unicastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device has forwarding and/or filtering information."
::= { unicastEntry 2 }
fdbPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Either the value '0', or the port number."
::= { unicastEntry 3 }
fdbStatus OBJECT-TYPE
SYNTAX INTEGER {
static(1),
learned(2),
self(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object clear the MAC address of this system theStatus of this entry.
static(1) - the value of static configured MAC address, used for forwarding.
dynamic(2) - the value of learnt MAC address."
::= { unicastEntry 4 }
fdbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1).
Can't destroy a learned fdb entry. Using the node addressClearOperation can destroy learned fdb entries."
::= { unicastEntry 5 }
multicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF MulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.This information is used by the
transparent bridging function in determining how to
propagate a received frame."
::= { fdbExt 2 }
multicastEntry OBJECT-TYPE
SYNTAX MulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific multicast MAC address for
which the device has some forwarding and/or filtering
information."
INDEX { vlanIndex, multicastAddress, destinationPort}
::= { multicastTable 1 }
MulticastEntry ::=
SEQUENCE {
multicastVID
VlanIndex,
multicastAddress
MacAddress,
destinationPort
Integer32,
multicastRowStatus
RowStatus
}
multicastVID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN identifier of this multicast entry."
::= { multicastEntry 1 }
multicastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A multicast MAC address for which the device has
forwarding and/or filtering information."
::= { multicastEntry 2 }
destinationPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A destination port of the multicast MAC address for which the device has
forwarding and/or filtering information."
::= { multicastEntry 3 }
multicastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
Can't destroy a learned fdb entry. Using the node addressClearOperation can destroy learned fdb entries.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { multicastEntry 4 }
filterTable OBJECT-TYPE
SYNTAX SEQUENCE OF FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about filter entries
for which the device has filtering information."
::= { fdbExt 3 }
filterEntry OBJECT-TYPE
SYNTAX FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific filter MAC address for
which the device has filtering information."
INDEX { filterAddress }
::= { filterTable 1 }
FilterEntry ::=
SEQUENCE {
filterAddress
MacAddress,
filterRowStatus
RowStatus
}
filterAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device has filtering information."
::= { filterEntry 1 }
filterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { filterEntry 2 }
addressClearOperation OBJECT-TYPE
SYNTAX INTEGER{
static(1),
dynamic(2),
filter(3),
multicast(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object clear the MAC address of this system theStatus of this entry.
static(1) - clear those entris which are created by management.
dynamic(2) - clear those entris which are created by learning.
filter(3) - clear those MAC filter entris.
multicast(4) - clear all multicast entries configured through management."
::= { fdbExt 4 }
addressAgingTime OBJECT-TYPE
SYNTAX INTEGER (10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dynamic mac address aging time, the unit of which is second.
Ageing-time range 10~1000000"
::= { fdbExt 5 }
fdbExtTrap OBJECT IDENTIFIER ::= { fdbExt 10 }
fdbExtDbFull NOTIFICATION-TYPE
OBJECTS { vlanIndex }
STATUS current
DESCRIPTION
"Fdb DB full."
::= { fdbExtTrap 1 }
--
-- vlanClass
--
--VlanClassRuleIp
vlanClassRuleIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanClassRuleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about filter entries
for which the device has filtering information."
::= { vlanClass 1 }
vlanClassRuleIpEntry OBJECT-TYPE
SYNTAX VlanClassRuleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific filter IP address for which the device has
filtering information."
INDEX { vlanClassRuleIpIndex, vlanClassRuleIpAddress,vlanClassRuleIpAddressLen, vlanClassIpVlanID}
::= { vlanClassRuleIpTable 1 }
VlanClassRuleIpEntry ::=
SEQUENCE {
vlanClassRuleIpIndex
VlanClassRuleIndex,
vlanClassRuleIpAddress
IpAddress,
vlanClassRuleIpAddressLen
Integer32,
vlanClassIpVlanID
VlanIndex,
vlanClassRuleIpRowStatus
RowStatus
}
vlanClassRuleIpIndex OBJECT-TYPE
SYNTAX VlanClassRuleIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Vlan Class rule ID."
::= { vlanClassRuleIpEntry 1 }
vlanClassRuleIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast IP address for which the device has filtering information."
::= { vlanClassRuleIpEntry 2 }
vlanClassRuleIpAddressLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the mask lenghth of ip."
::= { vlanClassRuleIpEntry 3 }
vlanClassIpVlanID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan ID which is mapped for the entry."
::= { vlanClassRuleIpEntry 4 }
vlanClassRuleIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { vlanClassRuleIpEntry 5 }
--VlanClassRuleMac
vlanClassRuleMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanClassRuleMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about filter entries
for which the device has filtering information."
::= { vlanClass 2 }
vlanClassRuleMacEntry OBJECT-TYPE
SYNTAX VlanClassRuleMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific filter MAC address for
which the device has filtering information."
INDEX { vlanClassRuleMacIndex, vlanClassRuleMacAddress,vlanClassMacVlanID}
::= { vlanClassRuleMacTable 1 }
VlanClassRuleMacEntry ::=
SEQUENCE {
vlanClassRuleMacIndex
VlanClassRuleIndex,
vlanClassRuleMacAddress
MacAddress,
vlanClassMacVlanID
VlanIndex,
vlanClassRuleMacRowStatus
RowStatus
}
vlanClassRuleMacIndex OBJECT-TYPE
SYNTAX VlanClassRuleIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Vlan Class rule ID."
::= { vlanClassRuleMacEntry 1 }
vlanClassRuleMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device has filtering information."
::= { vlanClassRuleMacEntry 2 }
vlanClassMacVlanID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan ID which is mapped for the entry."
::= { vlanClassRuleMacEntry 3 }
vlanClassRuleMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { vlanClassRuleMacEntry 4 }
--VlanClassRuleProtocol
vlanClassRuleProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanClassRuleProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about filter entries
for which the device has filtering information."
::= { vlanClass 3 }
vlanClassRuleProtocolEntry OBJECT-TYPE
SYNTAX VlanClassRuleProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific filter Protocol for
which the device has filtering information."
INDEX { vlanClassRuleProtocolIndex, vlanClassRuleProtocol,vlanClassProtocolVlanID}
::= { vlanClassRuleProtocolTable 1 }
VlanClassRuleProtocolEntry ::=
SEQUENCE {
vlanClassRuleProtocolIndex
VlanClassRuleIndex,
vlanClassRuleProtocol
VlanClassProtocol,
vlanClassProtocolVlanID
VlanIndex,
vlanClassRuleProtocolRowStatus
RowStatus
}
vlanClassRuleProtocolIndex OBJECT-TYPE
SYNTAX VlanClassRuleIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Vlan Class rule ID."
::= { vlanClassRuleProtocolEntry 1 }
vlanClassRuleProtocol OBJECT-TYPE
SYNTAX VlanClassProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol for which the device has filtering information.
2504 means ARP
32821 means RARP
2048 means IPv4
34525 means IPv6
34887 means MPLS
34888 means MPLS Multicast
13 means PPPOE
"
::= { vlanClassRuleProtocolEntry 2 }
vlanClassProtocolVlanID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan ID which is mapped for the entry."
::= { vlanClassRuleProtocolEntry 3 }
vlanClassRuleProtocolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { vlanClassRuleProtocolEntry 4 }
--VlanClassRuleIpv6
--vlanClassRuleIpv6Table OBJECT-TYPE
-- SYNTAX SEQUENCE OF VlanClassRuleIpv6Entry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table that contains information about filter entries
-- for which the device has filtering information."
-- ::= { vlanClass 4 }
--vlanClassRuleIpv6Entry OBJECT-TYPE
-- SYNTAX VlanClassRuleIpv6Entry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Information about a specific filter IPv6 address for which the device
-- has filtering information."
-- INDEX { vlanClassRuleIpv6Index, vlanClassRuleIpv6Address,vlanClassRuleIpv6AddressLen, vlanClassIpv6VlanID}
-- ::= { vlanClassRuleIpv6Table 1 }
--
--VlanClassRuleIpv6Entry ::=
-- SEQUENCE {
-- vlanClassRuleIpv6Index
-- VlanClassRuleIndex,
-- vlanClassRuleIpv6Address
-- VlanClassIpv6Address,
-- vlanClassRuleIpv6AddressLen
-- Integer32,
-- vlanClassIpv6VlanID
-- VlanIndex,
-- vlanClassRuleIpv6RowStatus
--RowStatus
-- }
--vlanClassRuleIpv6Index OBJECT-TYPE
-- SYNTAX VlanClassRuleIndex
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "An Vlan Class rule ID."
-- ::= { vlanClassRuleIpv6Entry 1 }
--
--vlanClassRuleIpv6Address OBJECT-TYPE
-- SYNTAX VlanClassIpv6Address
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "A unicast IP address for which the device has filtering information."
-- ::= { vlanClassRuleIpv6Entry 2 }
--
--vlanClassRuleIpv6AddressLen OBJECT-TYPE
-- SYNTAX Integer32 (0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This object indicates the mask lenghth of ip."
-- ::= { vlanClassRuleIpv6Entry 3 }
--
--vlanClassIpv6VlanID OBJECT-TYPE
-- SYNTAX VlanIndex
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Vlan ID which is mapped for the entry."
-- ::= { vlanClassRuleIpv6Entry 4 }
--
--vlanClassRuleIpv6RowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row.Now only realize CreateAndGo
-- and Destroy and Active."
-- ::= { vlanClassRuleIpv6Entry 5 }
--
--VlanClassGroup
vlanClassGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanClassGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about filter entries
for which the device has filtering information."
::= { vlanClass 5 }
vlanClassGroupEntry OBJECT-TYPE
SYNTAX VlanClassGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific filter group for
which the device has filtering information."
INDEX { vlanClassGroupIndex,vlanClassRuleIndex }
::= { vlanClassGroupTable 1 }
VlanClassGroupEntry ::=
SEQUENCE {
vlanClassGroupIndex
VlanClassGroupIndex,
vlanClassRuleIndex
VlanClassRuleIndex,
vlanClassGroupRowStatus
RowStatus
}
vlanClassGroupIndex OBJECT-TYPE
SYNTAX VlanClassGroupIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Vlan Class group ID."
::= { vlanClassGroupEntry 1 }
vlanClassRuleIndex OBJECT-TYPE
SYNTAX VlanClassRuleIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vlan Class rule index."
::= { vlanClassGroupEntry 2 }
vlanClassGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { vlanClassGroupEntry 3 }
--VlanClass Enable inteface
vlanClassEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanClassEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about filter entries
for which the device has filtering information."
::= { vlanClass 6 }
vlanClassEnableEntry OBJECT-TYPE
SYNTAX VlanClassEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific filter for
which the device has filtering information."
INDEX { vlanClassEnableIfIndex}
::= { vlanClassEnableTable 1 }
VlanClassEnableEntry ::=
SEQUENCE {
vlanClassEnableIfIndex
Integer32,
vlanClassEnableGroup
VlanClassGroupIndex,
vlanClassEnableBase
VlanClassEnableBase,
vlanClassEnableRowStatus
RowStatus
}
vlanClassEnableIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index which is enabled for Vlan Class ."
::= { vlanClassEnableEntry 1 }
vlanClassEnableGroup OBJECT-TYPE
SYNTAX VlanClassGroupIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Vlan Class group ID.
Group ID range is 0~31."
::= { vlanClassEnableEntry 2 }
vlanClassEnableBase OBJECT-TYPE
SYNTAX VlanClassEnableBase
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Vlan ID which is mapped for the entry."
::= { vlanClassEnableEntry 3 }
vlanClassEnableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { vlanClassEnableEntry 5 }
-- Sub Module: DOT1XEXT
-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
dot1xExtMaxReauthReqTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xExtMaxReauthReqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of login entry."
::= { dot1xExt 1 }
dot1xExtMaxReauthReqEntry OBJECT-TYPE
SYNTAX Dot1xExtMaxReauthReqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Login entry"
INDEX { dot1xExtMaxReauthReqIndex}
::= { dot1xExtMaxReauthReqTable 1 }
Dot1xExtMaxReauthReqEntry ::=
SEQUENCE
{
dot1xExtMaxReauthReqIndex
Integer32,
dot1xExtMaxReauthReqVersion
INTEGER,
dot1xExtMaxReauthReqNum
Integer32,
dot1xExtMaxReqNum
Integer32
}
dot1xExtMaxReauthReqIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index."
::= { dot1xExtMaxReauthReqEntry 1 }
dot1xExtMaxReauthReqVersion OBJECT-TYPE
SYNTAX INTEGER
{
version1(1),
version2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the protocol version and the default number is 2.The range is 1 to 2. "
DEFVAL {version2}
::= { dot1xExtMaxReauthReqEntry 2 }
dot1xExtMaxReauthReqNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Number of reauthentication attempts before becoming unauthorized. The range is 1 to 10. Not supported now"
::= { dot1xExtMaxReauthReqEntry 3 }
dot1xExtMaxReqNum OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of times that the switch sends an EAP-request/identity frame to the client. The range is 1 to 10."
DEFVAL {2}
::= { dot1xExtMaxReauthReqEntry 4 }
-- IEEE 802.1X VLAN policy
dot1xExtVlanPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xExtVlanPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of dot1x guest vlan configuration."
::= { dot1xExt 2 }
dot1xExtVlanPolicyEntry OBJECT-TYPE
SYNTAX Dot1xExtVlanPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of dot1x guest vlan configuration."
INDEX { dot1xExtVlanPolicyIndex}
::= { dot1xExtVlanPolicyTable 1 }
Dot1xExtVlanPolicyEntry ::=
SEQUENCE
{
dot1xExtVlanPolicyIndex
Integer32,
dot1xExtGuestVlan
Integer32
}
dot1xExtVlanPolicyIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index."
::= { dot1xExtVlanPolicyEntry 1 }
dot1xExtGuestVlan OBJECT-TYPE
SYNTAX Integer32 (0|2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When you configure a guest VLAN, clients that are not IEEE 802.1x-capable
are put into the guest VLAN when the server does not receive a response to
its EAP request/identity frame. Clients that are IEEE 802.1x-capable but
fail authentication not granted network access.The vlan range is
between [2-4094], 0 means guest vlan is not configured."
DEFVAL {0}
::= { dot1xExtVlanPolicyEntry 2 }
-- IEEE 802.1X global resource
dot1xExtMacBasedResource OBJECT IDENTIFIER ::= { dot1xExt 3 }
dot1xExtMacBasedResourceMaxInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max count of dot1x mac based interface. "
::= { dot1xExtMacBasedResource 1 }
dot1xExtMacBasedResourceCurrentInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current count of dot1x mac based interface. "
::= { dot1xExtMacBasedResource 2 }
dot1xExtMacBasedResourceMaxUser OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max count of dot1x mac based users (only include hardware accept or reject entries). "
::= { dot1xExtMacBasedResource 3 }
dot1xExtMacBasedResourceCurrentUser OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current count of dot1x mac based users (only include hardware accept or reject entries). "
::= { dot1xExtMacBasedResource 4 }
dot1xExtMacBasedResourceMaxUserAll OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max count of all dot1x mac based users (include waiting entries). "
::= { dot1xExtMacBasedResource 5 }
dot1xExtMacBasedResourceCurrentUserAll OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current count of all dot1x mac based users (include waiting entries). "
::= { dot1xExtMacBasedResource 6 }
-- IEEE 802.1X Mac based config
dot1xExtMacBasedConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xExtMacBasedConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of dot1x mac based interface."
::= { dot1xExt 4 }
dot1xExtMacBasedConfigEntry OBJECT-TYPE
SYNTAX Dot1xExtMacBasedConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Dot1x mac based interface entry"
INDEX { dot1xExtMacBasedConfigIndex}
::= { dot1xExtMacBasedConfigTable 1 }
Dot1xExtMacBasedConfigEntry ::=
SEQUENCE
{
dot1xExtMacBasedConfigIndex
Integer32,
dot1xExtMacBasedConfigMode
INTEGER,
dot1xExtMacBasedConfigBypassEn
INTEGER,
dot1xExtMacBasedConfigMaxUser
Integer32,
dot1xExtMacBasedConfigCurrentUser
Integer32,
dot1xExtMacBasedConfigMaxUserAll
Integer32,
dot1xExtMacBasedConfigCurrentUserAll
Integer32
}
dot1xExtMacBasedConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of interface."
::= { dot1xExtMacBasedConfigEntry 1 }
dot1xExtMacBasedConfigMode OBJECT-TYPE
SYNTAX INTEGER
{
port(0),
mac(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Dot1x port mode. 0: dot1x port based mode. 1: dot1x mac based mode."
DEFVAL{port}
::= { dot1xExtMacBasedConfigEntry 2 }
dot1xExtMacBasedConfigBypassEn OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Dot1x mac auth bypass function. 0: disable. 1: enable"
DEFVAL{disable}
::= { dot1xExtMacBasedConfigEntry 3 }
dot1xExtMacBasedConfigMaxUser OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Max user number of the port (only include hardware accept or reject entries).
Default: by default the max user number of the port is same as the max user number of the system. Different TCAM proflies have different default values."
::= { dot1xExtMacBasedConfigEntry 4 }
dot1xExtMacBasedConfigCurrentUser OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current user number of the port (only include hardware accept or reject entries)"
DEFVAL{0}
::= { dot1xExtMacBasedConfigEntry 5 }
dot1xExtMacBasedConfigMaxUserAll OBJECT-TYPE
SYNTAX Integer32 (1..510)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max user number of the port (include waiting entries)"
::= { dot1xExtMacBasedConfigEntry 6 }
dot1xExtMacBasedConfigCurrentUserAll OBJECT-TYPE
SYNTAX Integer32 (0..510)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current user number of the port (include waiting entries)
Default: by default the max user number of the port is same as the max user number of the system. Different TCAM proflies have different default values.
It should be 2 times large as the max hardware entries number, please reference to dot1xExtMacBasedConfigCurrentUser."
DEFVAL{0}
::= { dot1xExtMacBasedConfigEntry 7 }
-- IEEE 802.1X Mac based user entry
dot1xExtMacBasedUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xExtMacBasedUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of dot1x mac based users."
::= { dot1xExt 5 }
dot1xExtMacBasedUserEntry OBJECT-TYPE
SYNTAX Dot1xExtMacBasedUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Dot1x mac based user entry"
INDEX { dot1xExtMacBasedUserIndex, dot1xExtMacBasedUserMac}
::= { dot1xExtMacBasedUserTable 1 }
Dot1xExtMacBasedUserEntry ::=
SEQUENCE
{
dot1xExtMacBasedUserIndex
Integer32,
dot1xExtMacBasedUserMac
MacAddress,
dot1xExtMacBasedUserState
INTEGER,
dot1xExtMacBasedUserTimer
Integer32,
dot1xExtMacBasedUserIsBypass
INTEGER,
dot1xExtMacBasedUserInGuestVlan
INTEGER,
dot1xExtMacBasedUserGuestVlanID
Integer32,
dot1xExtMacBasedUserOffLine
INTEGER
}
dot1xExtMacBasedUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of interface."
::= { dot1xExtMacBasedUserEntry 1 }
dot1xExtMacBasedUserMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Mac address of user"
::= { dot1xExtMacBasedUserEntry 2 }
dot1xExtMacBasedUserState OBJECT-TYPE
SYNTAX INTEGER
{
waiting(0),
accept(1),
reject(2),
reauth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "State of the mac based user entry."
::= { dot1xExtMacBasedUserEntry 3 }
dot1xExtMacBasedUserTimer OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time (seconds) before state changed. "
::= { dot1xExtMacBasedUserEntry 4 }
dot1xExtMacBasedUserIsBypass OBJECT-TYPE
SYNTAX INTEGER
{
eapolUser(0),
bypassUser(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log on Method of the user."
::= { dot1xExtMacBasedUserEntry 5 }
dot1xExtMacBasedUserInGuestVlan OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If user is in guest vlan."
::= { dot1xExtMacBasedUserEntry 6 }
dot1xExtMacBasedUserGuestVlanID OBJECT-TYPE
SYNTAX Integer32(0|2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The guest vlan id. If the user is not authenticated by guest vlan, the id should be 0."
::= { dot1xExtMacBasedUserEntry 7 }
dot1xExtMacBasedUserOffLine OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
offLine(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this node to force a MAC user off line.
The default value is 0.
If this node's value is set to 1, the user should be forced offline and this entry should be deleted.
"
DEFVAL {none}
::= { dot1xExtMacBasedUserEntry 8 }
dot1xExtMacBasedClear OBJECT IDENTIFIER ::= { dot1xExt 6 }
dot1xExtMacBasedClearInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a interface to clear all mac users. "
::= { dot1xExtMacBasedClear 1 }
-- Sub Module: TRNG
--
-- Node definitions
--
trngMibObjects OBJECT IDENTIFIER ::= { timeRange 1 }
trngCreateTimerangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrngCreateTimerangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Creat TimeRange."
::= { trngMibObjects 1 }
trngCreateTimerangeEntry OBJECT-TYPE
SYNTAX TrngCreateTimerangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the entry of trngCreateTimerangeTable."
INDEX { trngIndex }
::= { trngCreateTimerangeTable 1 }
TrngCreateTimerangeEntry ::=
SEQUENCE
{
trngIndex
Integer32,
trngName
OCTET STRING,
trngValidFlag
TruthValue,
trngCreateRowStatus
RowStatus
}
trngIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TimeRange's index."
::= { trngCreateTimerangeEntry 1 }
trngName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TimeRange's name "
::= { trngCreateTimerangeEntry 2 }
trngValidFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid or invalid flag."
::= { trngCreateTimerangeEntry 3 }
trngCreateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { trngCreateTimerangeEntry 4 }
trngAbsoluteTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrngAbsoluteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Creat absoluteness time item of the TimeRange."
::= { trngMibObjects 2 }
trngAbsoluteEntry OBJECT-TYPE
SYNTAX TrngAbsoluteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the entry of trngAbsoluteTable."
INDEX { trngAbsoluteNameIndex }
::= { trngAbsoluteTable 1 }
TrngAbsoluteEntry ::=
SEQUENCE {
trngAbsoluteNameIndex
Integer32,
timerangeAbsoluteStartTime
OCTET STRING,
timerangeAbsoluteEndTime
OCTET STRING,
timerangeAbsolueRowStatus
RowStatus
}
trngAbsoluteNameIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TimeRange's index."
::= { trngAbsoluteEntry 1 }
timerangeAbsoluteStartTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start point of the timerange.The format defined like 'hh:mm:ss,Mon/D/YYYY'.
The Month of the year should be First three letters of the month."
::= { trngAbsoluteEntry 2 }
timerangeAbsoluteEndTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End point of the timerange.The format defined like 'hh:mm:ss,Mon/D/YYYY'.
The Month of the year should be First three letters of the month."
::= { trngAbsoluteEntry 3 }
timerangeAbsolueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { trngAbsoluteEntry 4 }
trngPeriodicTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrngPeriodicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Creat periodic time item of the TimeRange."
::= { trngMibObjects 3 }
trngPeriodicEntry OBJECT-TYPE
SYNTAX TrngPeriodicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of trngPeriodicTable."
INDEX { trngPeriodicNameIndex }
::= { trngPeriodicTable 1 }
TrngPeriodicEntry ::=
SEQUENCE {
trngPeriodicNameIndex
Integer32,
trngPeriodicStartDayOfWeek
Integer32,
trngPeriodicEndDayOfWeek
Integer32,
timerangePeriodicStartTime
OCTET STRING,
timerangePeriodicEndTime
OCTET STRING,
timerangePeriodicRowStatus
RowStatus
}
trngPeriodicNameIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TimeRange's index."
::= { trngPeriodicEntry 1 }
trngPeriodicStartDayOfWeek OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The start day of week.
1 monday
2 tuesday
3 wednesday
4 thursday
5 friday
6 saturday
7 sunday
8 daily
9 weekday
10 weekend
"
::= { trngPeriodicEntry 2 }
trngPeriodicEndDayOfWeek OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The end day of week.
1 monday
2 tuesday
3 wednesday
4 thursday
5 friday
6 saturday
7 sunday
"
::= { trngPeriodicEntry 3 }
timerangePeriodicStartTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Start point of this timerange,The format defined like 'hh:mm'."
::= { trngPeriodicEntry 4 }
timerangePeriodicEndTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"End point of this timerange.The format defined like 'hh:mm'."
::= { trngPeriodicEntry 5 }
timerangePeriodicRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { trngPeriodicEntry 6 }
-- Sub Module: STPEXTENSIONS
BridgeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Bridge-Identifier, as used in the Spanning Tree
Protocol, to uniquely identify a bridge.Its first two
octets (in network byte order) contain a priority value,
and its last 6 octets contain the MAC address used to
refer to a bridge in a unique fashion (typically, the
numerically smallest MAC address of all ports on the
bridge)."
SYNTAX OCTET STRING (SIZE (8))
stpExtStpEnable OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether spanning tree protocol is enabled on the device or not.
The meanings of the values are:
enabled(1) - Enable spanning tree protocol;
disabled(2) - Disable spanning tree protocol."
::= { stpExt 1 }
stpExtPathcostStandard OBJECT-TYPE
SYNTAX INTEGER { dot1d1998(1), dot1t(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the administrative spanning tree path cost mode configured on device.
The meanings of the values are:
dot1d1998(1) - the standard of path cost is IEEE 802.1D-1998 standard;
dot1t(2) - the standard of path cost is IEEE 802.1T standard."
::= { stpExt 2 }
stpExtBpduGuard OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the BpduGuard is enabled on the device or not.
The meanings of the values are:
enable(1) - Enable bpdu-guard globally;
disabled(2) - Disable bpdu-guard globally."
::= { stpExt 3 }
stpExtBpduFilter OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the BpduFilter is enabled on the device or not.
The meanings of the values are:
enable(1) - Enable bpdu-filter globally;
disabled(2) - Disable bpdu-filter globally."
::= { stpExt 4 }
stpExtBpduTransparent OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"An indication of whether the BpduTransparent is enabled on the device or not.
If BPDU transparent is enabled(1), Bridge should forward BPDUs as common data
packets; If BPDU transparent is disabled(2), Bridge should send BPDUs to CPU
and discard BPDUs.The default value is disabled(2)."
::= { stpExt 5 }
stpExtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains extended stp information."
::= { stpExt 6 }
stpExtPortEntry OBJECT-TYPE
SYNTAX StpExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of extended stp information maintained by each port."
INDEX { stpxpPortIndex }
::= { stpExtPortTable 1 }
StpExtPortEntry ::=
SEQUENCE
{
stpxpPortIndex
InterfaceIndex,
stpxRootGuardObjects
INTEGER,
stpxRestrictedTcnObjects
INTEGER,
stpxRestrictedRoleObjects
INTEGER,
stpxEdgePortAdminBpduGuardObjects
INTEGER,
stpxEdgePortOperBpduGuardObjects
INTEGER,
stpxEdgePortAdminBpduFilterObjects
INTEGER,
stpxEdgePortOperBpduFilterObjects
INTEGER,
stpxForceVersionObjects
INTEGER,
stpxLoopGuardObjects
INTEGER
}
stpxpPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains bridge
management information."
::= { stpExtPortEntry 1 }
stpxRootGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the RootGuard capability is enabled
on this port or not.
When a port's root guard is enabled(1) , if this port receives
a superior BPDU, this port should be set to discarding state.
The default value is disabled(2)."
::= { stpExtPortEntry 2 }
stpxRestrictedTcnObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the RestrictedTcn capability is
enabled on this port or not.
If restricted TCN is enabled(1) on a port , this port should
not propagate received topology change notifications and topology
changes to other Ports.The default value is disabled(2)."
::= { stpExtPortEntry 3 }
stpxRestrictedRoleObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the RestrictedRole capability is enabled on
this port or not. If restricted Role is enabled(1) on a port,
this Port should not to be selected as Root Port ;
even it has the best spanning tree priority vector.The default value
is disabled(2)."
::= { stpExtPortEntry 4 }
stpxEdgePortAdminBpduGuardObjects OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the administrative BpduGuard capability is
enabled on this port or not.
If an edge port's bpdu guard is enable(1) ,when this port receives
a BPDU, this port should be set into error-disabled state;
If an edge port's bpdu guard is default(0) , this port's
stpxEdgePortOperBpduGuardObjects determined in accordance with
stpExtBpduGuard.The default value is default(0)."
::= { stpExtPortEntry 5 }
stpxEdgePortOperBpduGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the edge port's bpdu guard parameter.
If stpxEdgePortAdminBpduGuardObjects is set to default(0),
then the value of stpxEdgePortOperBpduGuardObjects is determined in
accordance with stpExtBpduGuard."
::= { stpExtPortEntry 6 }
stpxEdgePortAdminBpduFilterObjects OBJECT-TYPE
SYNTAX INTEGER {default(0),enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the administrative BpduFilter capability
is enabled on this port or not.
If an edge port's bpdu filter is disabled(2) , this port should
transmit and receive BPDUs;
if an edge port's bpdu filter is enabled(1) , this port should
not transmit and receive any BPDU.
if an edge port's bpdu filter is default(0) , this port's
stpxEdgePortOperBpduFilterObjectsisdetermined in accordance with
stpExtBpduFilter.The default value is default(0)."
::= { stpExtPortEntry 7 }
stpxEdgePortOperBpduFilterObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the edge port's bpdu filter parameter.
If stpxEdgePortAdminBpduFilterObjects is set to default(0),
then the value of stpxEdgePortOperBpduFilterObjects is determined in
accordance with stpExtBpduFilter."
::= { stpExtPortEntry 8 }
stpxForceVersionObjects OBJECT-TYPE
SYNTAX INTEGER {stp(0),rstp(2),mstp(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Force Protocol Version parameter, controlled by management,
instructs MSTP to emulate additional aspects of the behavior of
earlier versions of spanning tree protocol that are not strictly
required for interoperability.The value of this parameter applies
to all Ports of the Bridge."
::= { stpExtPortEntry 9 }
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }
stpExtTrapEnable OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"An indication of whether spanning tree protocol trap is enabled
on the device or not. The meanings of the values are:
enabled(1) - Enable spanning tree protocol trap;
disabled(2) - Disable spanning tree protocol trap."
::= { stpExt 7 }
stpExtMaxhops OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max hops of spanning tree protocol,
its range is <1-40> and default value is 20"
::= {stpExt 8 }
--
-- MIB for IEEE 802.1s Multiple Spanning Tree Protocol
--
mstpExt OBJECT IDENTIFIER ::= { stpExt 10 }
stpVersion OBJECT-TYPE
SYNTAX INTEGER
{
stp(1),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocol the bridge is
currently running.The value 'stpCompatible(1)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D-1998 ,'rstp(2)' indicates the Rapid
Spanning Tree Protocol specified in IEEE 802.1w and
clause 17 of 802.1D-2004,'mstp(3)'indicates the Multiple
Spanning Tree Protocol specified in IEEE 802.1s
.The values are directly from the IEEE standard.
New values may be defined as future versions of
the protocol become available."
-- DEFVAL INDEX { rstp }
::= { mstpExt 1 }
stpRegionName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration name that identifies the MST
region and is used as one of the inputs in the
computation of the MST Configuration Identifier.
This object does not have any default value."
REFERENCE
"IEEE 802.1s clause 13.7"
::= { mstpExt 2 }
stpRevision OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the MST revision that
identifies the MST region and is used as one
of the inputs in the computation of the MST
configuration Identifier.This object does not
have any default value."
REFERENCE
"IEEE 802.1s: Section 13.7"
::= { mstpExt 3 }
stpVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains MSTI-VLAN mapping.
This release supports up to 16 instances;
each spanning tree instance is identified
by an instance ID that ranges from 0 to 4094.
Instance 0 is mandatory and is always present."
::= { mstpExt 4 }
stpVlanEntry OBJECT-TYPE
SYNTAX StpVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every MST instance
about the VLANs mapped to that instance."
INDEX { stpVlanInstId }
::= { stpVlanTable 1 }
StpVlanEntry ::=
SEQUENCE
{
stpVlanId
Integer32,
stpVlanInstId
Integer32
}
stpVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the index to the MSTI-VLAN Table."
REFERENCE
"IEEE 802.1s"
::= { stpVlanEntry 1 }
stpVlanInstId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifier of this MST Instance."
REFERENCE
"IEEE 802.1s"
::= { stpVlanEntry 2 }
stpInstTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains MST instance-specific
configuration and operational information."
::= { mstpExt 5 }
stpInstEntry OBJECT-TYPE
SYNTAX StpInstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every mst instance
about the STP topology for that instance."
INDEX { stpInstId }
::= { stpInstTable 1 }
StpInstEntry ::=
SEQUENCE
{
stpInstId
Integer32,
stpPriority
Integer32,
stpInstDesignatedRoot
BridgeId,
stpInstRootCost
Integer32,
stpInstRootPort
Integer32
}
stpInstId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifier of this MST Instance.
MST establishes and maintains additional
spanning trees withineach MST region.
These spanning trees are referred to as
MST instances (MSTIs)."
REFERENCE
"IEEE 802.1s"
::= { stpInstEntry 1 }
stpPriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower the priority of the bridge, the higher likelihood of the bridge becoming a root bridge or a designated bridge for the LAN. The permitted range of values is 0-61440. The priority values must be in multiples of 4096."
REFERENCE
"IEEE 802.1s: Section 13.23.2"
-- DEFVAL { 32768 }
::= { stpInstEntry 2 }
stpInstDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the
corresponding spanning tree instance as determined
by the Spanning Tree Protocol for that instance.
This value is used as the CIST Root Identifier or MSTI
regional root identifier parameter in all MST BPDUs
originated by this node."
REFERENCE
"IEEE 802.1s: Section 13.23.6, 13.23.12"
::= { stpInstEntry 3 }
stpInstRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from
this bridge for this instance."
REFERENCE
"IEEE 802.1s: Section 13.23.6, 13.23.12"
::= { stpInstEntry 4 }
stpInstRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge for this instance."
REFERENCE
"IEEE 802.1s: Section 13.23.6, 13.23.12"
::= { stpInstEntry 5 }
stpInstPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains MST port and instance information."
::= { mstpExt 6 }
stpInstPortEntry OBJECT-TYPE
SYNTAX StpInstPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information maintained by every MST port
for each MST instance it belongs to about the Spanning
Tree Protocol state for that port."
INDEX { stpInstId, stpxpPortIndex }
::= { stpInstPortTable 1 }
StpInstPortEntry ::=
SEQUENCE
{
stpInstPortPriority
Integer32,
stpInstPortState
INTEGER,
stpInstPortPathCost
Integer32,
stpInstPortDesignatedRoot
BridgeId,
stpInstPortDesignatedCost
Integer32,
stpInstPortDesignatedBridge
BridgeId,
stpInstPortDesignatedPort
InterfaceIndex,
stpInstPortRole
INTEGER,
stpInstRestrictedRole
INTEGER,
stpInstRestrictedTcn
INTEGER
}
stpInstPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the priority field which is
contained in the most significant 4 bits
of the first (in network byte order)
octet of the (2 octet long) Port ID.As it is
contained only in 4 bits, the value has to be
a multiple of 16.The other octet of the Port
ID is given by the value of stpInstPortIndex."
REFERENCE
"IEEE 802.1s: Section 13.24.21 "
::= { stpInstPortEntry 1 }
stpInstPortState OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
discarding(2),
learning(3),
forwarding(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port'scurrent state as defined by
application of the Spanning Tree Protocol.This
state controls what action a port takes on
reception of a frame.For ports which
are disabled (see dot1dStpPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1s: Section 13.16"
::= { stpInstPortEntry 2 }
stpInstPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port.802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.
Path cost in range .(802.1t:1-200000000, 802.1d-1998:1-65535)."
REFERENCE
"IEEE 802.1s: Section 13.24.8, 13.24.17"
::= { stpInstPortEntry 3 }
stpInstPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1s: Section 13.24.4, 13.24.11"
::= { stpInstPortEntry 4 }
stpInstPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port.This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1s: Section 13.24.4, 13.24.11"
::= { stpInstPortEntry 5 }
stpInstPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1s: Section 13.24.4, 13.24.11"
::= { stpInstPortEntry 6 }
stpInstPortDesignatedPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1s: Section 13.24.4, 13.24.11"
::= { stpInstPortEntry 7 }
stpInstPortRole OBJECT-TYPE
SYNTAX INTEGER
{
master(0),
alternate(1),
root(2),
designated(3),
disabled(4),
backup(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the port.As per IEEE 802.1s, the
port can have any of the following roles:
Disabled, Root, Designated, Alternate, Backup,
Master."
REFERENCE
"IEEE 802.1s: Section 13.24.25"
::= { stpInstPortEntry 8 }
stpInstRestrictedRole OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the RestrictedRole capability is
enabled on this port or not.
If restricted Role is enabled(1) on a port,this Port should
not to be selected as Root Port ; even it has the best spanning
tree priority vector.The default value is disabled(2)."
::= { stpInstPortEntry 9 }
stpInstRestrictedTcn OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the RestrictedTcn capability is enabled
on this port or not.
If restricted TCN is enabled(1) on a port , this port should
not propagate received topology change notifications and topology
changes to other Ports.The default value is disabled(2)."
::= { stpInstPortEntry 10 }
stpInstNum OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of mst configured instances."
::= { mstpExt 7 }
stpDigests OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the number of MST Configuration Identification."
::= { mstpExt 8 }
-- Sub Module: IGMPEXT
igmpRouterInterfaceExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpRouterInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of interface entry."
::= { igmpExt 1 }
igmpRouterInterfaceExtEntry OBJECT-TYPE
SYNTAX IgmpRouterInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"igmp router interface entry."
INDEX { igmpRouterIfIndex, igmpRouterQuerierType}
::= { igmpRouterInterfaceExtTable 1 }
IgmpRouterInterfaceExtEntry ::=
SEQUENCE
{
igmpRouterIfIndex
Integer32,
igmpRouterQuerierType
Integer32,
igmpRouterIfGroupLimit
Integer32,
igmpRouterIfImmediateLeaveAccess
OCTET STRING,
igmpRouterIfProxyService
TruthValue,
igmpRouterIfAccess
OCTET STRING,
igmpRouterIfQuerierTimeout
Integer32,
igmpRouterIfGroupLimitExceptAccess
OCTET STRING,
igmpRouterIfClearGrp
INTEGER
}
igmpRouterIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"igmp router Interface index."
::= { igmpRouterInterfaceExtEntry 1 }
igmpRouterQuerierType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"igmp router Interface querier type: ipv4 or ipv6."
::= { igmpRouterInterfaceExtEntry 2 }
igmpRouterIfGroupLimit OBJECT-TYPE
SYNTAX Integer32(1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"igmp router Interface group limit."
::= { igmpRouterInterfaceExtEntry 3 }
igmpRouterIfImmediateLeaveAccess OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Leave groups immediately without sending last member query,
use for one host network only."
::= { igmpRouterInterfaceExtEntry 4 }
igmpRouterIfProxyService OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Igmp router Interface proxy service .
True(1),False(2)."
::= { igmpRouterInterfaceExtEntry 5 }
igmpRouterIfAccess OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"igmp router Interface IGMP group access group."
::= { igmpRouterInterfaceExtEntry 6 }
igmpRouterIfQuerierTimeout OBJECT-TYPE
SYNTAX Integer32(60..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"igmp router Interface IGMP previous querier timeout."
DEFVAL { 255 }
::= { igmpRouterInterfaceExtEntry 7 }
igmpRouterIfGroupLimitExceptAccess OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"igmp router Interface IGMP group access group, Groups
not to be counted."
::= { igmpRouterInterfaceExtEntry 8 }
igmpRouterIfClearGrp OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete IGMP group cache entries."
::= { igmpRouterInterfaceExtEntry 9 }
igmpRouterGobalGrpLimit OBJECT-TYPE
SYNTAX Integer32(1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Igmp router global group limit."
::= { igmpExt 2 }
igmpRouterSsmMappingEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(2),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of ssm mapping .enable(1), disable(2). Default setting is disable(2)."
DEFVAL { disable }
::= { igmpExt 3 }
igmpRouterSsmMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpRouterSsmMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure ssm mapping list. using acl to map to specified source"
::= { igmpExt 4 }
igmpRouterSsmMappingEntry OBJECT-TYPE
SYNTAX IgmpRouterSsmMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of igmpRouterSsmMappingTable."
INDEX { igmpRouterSsmMappingAclName, igmpRouterSsmMappingSourceAddress}
::= { igmpRouterSsmMappingTable 1 }
IgmpRouterSsmMappingEntry ::=
SEQUENCE {
igmpRouterSsmMappingIndex INTEGER,
igmpRouterSsmMappingSourceAddress IpAddress,
igmpRouterSsmMappingAclName OCTET STRING,
igmpRouterSsmMappingRowStatus RowStatus
}
igmpRouterSsmMappingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"index of group list mapping (1~32)"
::= { igmpRouterSsmMappingEntry 1 }
igmpRouterSsmMappingSourceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"source address which group list mapping to"
::= { igmpRouterSsmMappingEntry 2 }
igmpRouterSsmMappingAclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"acl name of group list "
::= { igmpRouterSsmMappingEntry 3 }
igmpRouterSsmMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { igmpRouterSsmMappingEntry 4 }
-- Sub Module: BOARDHEALTHYMONITOR
--
-- Textual conventions
--
SysmonBootType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify the place to boot to."
SYNTAX INTEGER
{
hold(0),
reload(1)
}
HBMReactivateType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify the type to reactive."
SYNTAX INTEGER
{
warning(0),
shutdown(1),
reload(2)
}
--
-- Node definitions
--
--sysmon OBJECT IDENTIFIER ::= { boardHealthyMonitor 1 }
sysmonEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of sysmon .enable(1), disable(2). Default setting is enable(1)."
::= { boardHealthyMonitor 1 }
heartBeatMonitor OBJECT IDENTIFIER ::= { boardHealthyMonitor 2 }
heartBeatMonitorEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of heart-beat-monitor. enable(1), disable(2). Default setting is enable(1)"
::= { heartBeatMonitor 1 }
heartBeatMonitorReactivate OBJECT-TYPE
SYNTAX HBMReactivateType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reactive type of heart-beat-monitor.warning(0), shutdown(1), reload(2). Default setting is reload(2). "
DEFVAL { reload }
::= { heartBeatMonitor 2 }
lastDumpedProcess OBJECT-TYPE
SYNTAX INTEGER(1..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process id of last dumped process."
::= { boardHealthyMonitor 3 }
-- Sub Module: ARPINSP
-- arp type value
ArpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"arp's type, request or response."
SYNTAX INTEGER
{
request(1),
response(2),
all(3)
}
--
-- Node of arpAclGroupTable
--
arpAclGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpAclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure arp access list."
::= { arpInsp 1 }
arpAclGroupEntry OBJECT-TYPE
SYNTAX ArpAclGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the index of arpAclGroupTable."
INDEX { arpAclGroupIndex }
::= { arpAclGroupTable 1 }
ArpAclGroupEntry ::=
SEQUENCE
{
arpAclGroupIndex
Integer32,
arpAclGroupName
OCTET STRING,
arpAclGroupRowStatus
RowStatus
}
arpAclGroupIndex OBJECT-TYPE
SYNTAX Integer32 (30001..40000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of arp acl group."
::= { arpAclGroupEntry 1 }
arpAclGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of arp acl group."
::= { arpAclGroupEntry 2 }
arpAclGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { arpAclGroupEntry 3 }
--
-- Nodes of arpAclRuleTable
--
arpAclRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpAclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ARP acl rules."
::= { arpInsp 2 }
arpAclRuleEntry OBJECT-TYPE
SYNTAX ArpAclRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arp acl rules information."
INDEX { arpAclIndex, arpAclRuleIndex }
::= { arpAclRuleTable 1 }
ArpAclRuleEntry ::=
SEQUENCE
{
arpAclIndex
Integer32,
arpAclRuleIndex
Integer32,
arpAclAct
RuleAction,
arpType
ArpType,
arpSenderIp
IpAddress,
arpSenderIpWild
IpAddress,
arpSenderMac
OCTET STRING,
arpSenderMacWild
OCTET STRING,
arpAclLog
TruthValue,
arpAclRowStatus
RowStatus
}
arpAclIndex OBJECT-TYPE
SYNTAX Integer32 (30001..40000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of arp acl group."
::= { arpAclRuleEntry 1 }
arpAclRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..131071)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rule index of arp acl rule."
::= { arpAclRuleEntry 2 }
arpAclAct OBJECT-TYPE
SYNTAX RuleAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of arp acl rule.
permit(1), deny(2)."
::= { arpAclRuleEntry 3 }
arpType OBJECT-TYPE
SYNTAX ArpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of arp: request or response or all.
request(1), response(2), all(3)."
::= { arpAclRuleEntry 4 }
arpSenderIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ARP sender IP adress."
::= { arpAclRuleEntry 5 }
arpSenderIpWild OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ARP sender IP adress's wild."
::= { arpAclRuleEntry 6 }
arpSenderMac OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ARP sender mac adress."
::= { arpAclRuleEntry 7 }
arpSenderMacWild OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ARP sender mac adress's wild ."
::= { arpAclRuleEntry 8 }
arpAclLog OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"record the log when being matched.
true(1), false(2)."
::= { arpAclRuleEntry 9 }
arpAclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { arpAclRuleEntry 10 }
--
-- Nodes of arpAclApplyTable
--
arpAclApplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpAclApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ARP acl applying."
::= { arpInsp 3 }
arpAclApplyEntry OBJECT-TYPE
SYNTAX ArpAclApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arp acl applying information."
INDEX { arpAclApplyVid }
::= { arpAclApplyTable 1 }
ArpAclApplyEntry ::=
SEQUENCE
{
arpAclApplyVid
Integer32,
arpAclApplyName
OCTET STRING,
arpAclApplyStatic
TruthValue,
arpAclApplyRowStatus
RowStatus
}
arpAclApplyVid OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan id of arp acl applied."
::= { arpAclApplyEntry 1 }
arpAclApplyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The applied arp acl name."
::= { arpAclApplyEntry 2 }
arpAclApplyStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The arp acl applied type is static.
true(1), false(2)."
DEFVAL{false}
::= { arpAclApplyEntry 3 }
arpAclApplyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { arpAclApplyEntry 4 }
--
-- Nodes of arpInspValidateDestMac
--
arpInspValidateDestMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"whether do Validation of arp's dest-mac.
true(1), false(2)."
::= { arpInsp 4 }
--
-- Nodes of arpInspValidateIP
--
arpInspValidateIP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"whether do Validation of arp's IP.
true(1), false(2)."
::= { arpInsp 5 }
--
-- Nodes of arpInspValidateSrcMac
--
arpInspValidateSrcMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"whether do Validation of arp's src-mac.
true(1), false(2)."
::= { arpInsp 6 }
--
-- Nodes of arpInspEnableTable
--
arpInspEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ARP Inspection Enable."
::= { arpInsp 7 }
arpInspEnableEntry OBJECT-TYPE
SYNTAX ArpInspEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arp inspection enable information."
INDEX { arpInspEnVid }
::= { arpInspEnableTable 1 }
ArpInspEnableEntry ::=
SEQUENCE
{
arpInspEnVid
Integer32,
arpInspEnableRowStatus
RowStatus
}
arpInspEnVid OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan id, which enables arp inspection."
::= { arpInspEnableEntry 1 }
arpInspEnableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { arpInspEnableEntry 2 }
--
-- Nodes of arpInspIfTrustTable
--
arpInspIfTrustTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspIfTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ARP trust interface."
::= { arpInsp 8 }
arpInspIfTrustEntry OBJECT-TYPE
SYNTAX ArpInspIfTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP trust interface information."
INDEX { arpInspTrustIfindex }
::= { arpInspIfTrustTable 1 }
ArpInspIfTrustEntry ::=
SEQUENCE
{
arpInspTrustIfindex
Integer32,
arpInspTrustRowStatus
RowStatus
}
arpInspTrustIfindex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex."
::= { arpInspIfTrustEntry 1 }
arpInspTrustRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { arpInspIfTrustEntry 2 }
--
-- Nodes of arpInspLogbuffEntries
--
arpInspLogbuffEntries OBJECT-TYPE
SYNTAX Integer32 (10..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of entries for log buffer. Range 10~1024. Default value is 32."
DEFVAL { 32 }
::= { arpInsp 9 }
--
-- Nodes of arpInspLogbuffLogsTable
--
arpInspLogbuffLogsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpInspLogbuffLogsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ARP Inspection log buff logs."
::= { arpInsp 10 }
arpInspLogbuffLogsEntry OBJECT-TYPE
SYNTAX ArpInspLogbuffLogsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP log buff logs information."
INDEX { arpInspLogbuffLogs }
::= { arpInspLogbuffLogsTable 1 }
ArpInspLogbuffLogsEntry ::=
SEQUENCE
{
arpInspLogbuffLogs
Integer32,
arpInspLogbuffInterval
Integer32,
arpInspLogbuffRowStatus
RowStatus
}
arpInspLogbuffLogs OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Number of logs per interval. Range 0~1024. Default value is 5."
DEFVAL { 5 }
::= { arpInspLogbuffLogsEntry 1 }
arpInspLogbuffInterval OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interval for controlling logging rate. Range 0~86400. Default value is 1."
DEFVAL { 1 }
::= { arpInspLogbuffLogsEntry 2 }
arpInspLogbuffRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1)."
::= { arpInspLogbuffLogsEntry 3 }
pimsmMibObject OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Description."
::= { pimsmExt 1 }
pimInterfaceExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of pim interface extension entry."
::= { pimsmMibObject 1 }
pimInterfaceExtEntry OBJECT-TYPE
SYNTAX PimInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"pim sm interface extension entry"
INDEX { pimInterfaceIfIndex, pimInterfaceIPVersion}
::= { pimInterfaceExtTable 1 }
PimInterfaceExtEntry ::=
SEQUENCE
{
pimInterfaceIfIndex
Integer32,
pimInterfaceIPVersion
Integer32,
pimInterfaceExcludeGenid
TruthValue,
pimInterfaceNeighborFilter
OCTET STRING,
pimInterfaceUnicastBsm
TruthValue
}
pimInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "pim Interface index."
::= { pimInterfaceExtEntry 1 }
pimInterfaceIPVersion OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "pim interface IP version"
::= { pimInterfaceExtEntry 2 }
pimInterfaceExcludeGenid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Exclude gen-id option from PIM hello packets on this interface"
::= { pimInterfaceExtEntry 3 }
pimInterfaceNeighborFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "PIM peering filter"
::= { pimInterfaceExtEntry 4 }
pimInterfaceUnicastBsm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Enable sending and receiving of unicast BSM for backward compatibility"
::= { pimInterfaceExtEntry 5 }
pimAcceptRegisterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Register accept filter at RP"
::= { pimsmMibObject 2 }
pimIgnoreRpSetPriority OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ignore RP set priority value.enable(1),disable(2)."
::= { pimsmMibObject 3 }
pimCiscoRegisterChecksum OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Calculate register checksum over whole packet (Cisco compatibility).enable(1),disable(2)."
::= { pimsmMibObject 4 }
pimJpTimer OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Join/Prune timer"
::= { pimsmMibObject 5 }
pimRegisterRateLimit OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for PIM registers, Packets per second"
::= { pimsmMibObject 6 }
pimRegisterRpReachability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable RP reachability check for PIM registers"
::= { pimsmMibObject 7 }
pimRegisterSource OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source address for PIM register"
::= { pimsmMibObject 8 }
pimRegisterSuppression OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Register suppression for PIM registers"
::= { pimsmMibObject 9 }
pimRpRegisterKat OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"KAT for (S,G) at RP from PIM registers: KAT time in secs"
::= { pimsmMibObject 10 }
pimSptSwitchThresholdInfinity OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Source-tree switching threshold Never switch"
::= { pimsmMibObject 11 }
pimSptSwitchThresholdInfinityList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source-tree switching threshold Never switch list"
::= { pimsmMibObject 12 }
pimBsrCandidate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Candidate bootstrap router (candidate BSR)"
::= { pimsmMibObject 13 }
pimSsmDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SSM range as default. enable(1), disable(2). Default setting is disable(2)."
::= { pimsmMibObject 14 }
pimSsmRange OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SSM range to group list by acl"
::= { pimsmMibObject 15 }
pimMcastPimSmAdminMode OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PIM SM administrative mode enable. Always enable.
set value: (1)enable
(2)disable"
::= { pimsmMibObject 16 }
pimSwitchIPRoutingMode OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Routing administrative mode enable. Always enable.
set value: (1)enable
(2)disable"
::= { pimsmMibObject 17 }
pimIfMcastEnableExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimIfMcastEnableExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of pim interface mcast enable extension entry."
::= { pimsmMibObject 18 }
pimIfMcastEnableExtEntry OBJECT-TYPE
SYNTAX PimIfMcastEnableExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"pim sm interface extension entry"
INDEX { pimIfMcastEnableIfIndex, pimIfMcastEnableIPVersion}
::= { pimIfMcastEnableExtTable 1 }
PimIfMcastEnableExtEntry ::=
SEQUENCE
{
pimIfMcastEnableIfIndex
Integer32,
pimIfMcastEnableIPVersion
Integer32,
pimIfMcastEnable
Integer32,
pimIfMcastEnableState
Integer32
}
pimIfMcastEnableIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "pim Interface index."
::= { pimIfMcastEnableExtEntry 1 }
pimIfMcastEnableIPVersion OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "pim interface IP version.IPv4(1),IPv6(2)."
::= { pimIfMcastEnableExtEntry 2 }
pimIfMcastEnable OBJECT-TYPE
SYNTAX Integer32 (4..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "pim Interface multicast enable.
set value: (4)set
(6)unset"
::= { pimIfMcastEnableExtEntry 3 }
pimIfMcastEnableState OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "pim Interface multicast enable.
set value: (1)active
(2)inactive"
::= { pimIfMcastEnableExtEntry 4 }
-- Sub Module: OSPFEXT
ospfExtProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of process entry. The the 0 index is used by default vrf,
if the index is 0, the ospfExtProcessVrfName is invalid."
::= { ospfExt 1 }
ospfExtProcessEntry OBJECT-TYPE
SYNTAX OspfExtProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ospf process entry."
INDEX { ospfExtProcessIndex}
::= { ospfExtProcessTable 1 }
OspfExtProcessEntry ::=
SEQUENCE
{
ospfExtProcessIndex
Integer32,
ospfExtProcessVrfName
OCTET STRING,
ospfExtProcessRowStatus
RowStatus,
ospfExtProcessLsaSummaryRouterCount
Integer32,
ospfExtProcessLsaSummaryRouterMaxAge
Integer32,
ospfExtProcessLsaSummaryNetworkCount
Integer32,
ospfExtProcessLsaSummaryNetworkMaxAge
Integer32,
ospfExtProcessLsaSummaryNetCount
Integer32,
ospfExtProcessLsaSummaryNetMaxAge
Integer32,
ospfExtProcessLsaSummaryASBRCount
Integer32,
ospfExtProcessLsaSummaryASBRMaxAge
Integer32,
ospfExtProcessLsaSummaryType5ExtCount
Integer32,
ospfExtProcessLsaSummaryType5ExtMaxAge
Integer32,
ospfExtProcessLsaSummaryAttributeCount
Integer32,
ospfExtProcessLsaSummaryAttributeMaxAge
Integer32,
ospfExtProcessLsaSummaryOpaqueLinkCount
Integer32,
ospfExtProcessLsaSummaryOpaqueLinkMaxAge
Integer32,
ospfExtProcessLsaSummaryOpaqueProcessCount
Integer32,
ospfExtProcessLsaSummaryOpaqueProcessMaxAge
Integer32,
ospfExtProcessLsaSummaryOpaqueASCount
Integer32,
ospfExtProcessLsaSummaryOpaqueASMaxAge
Integer32,
ospfExtProcessRouteSummaryConnectedCount
Integer32,
ospfExtProcessRouteSummaryDiscardCount
Integer32,
ospfExtProcessRouteSummaryIntraAreaCount
Integer32,
ospfExtProcessRouteSummaryInterAreaCount
Integer32,
ospfExtProcessRouteSummaryExtType1Count
Integer32,
ospfExtProcessRouteSummaryExtType2Count
Integer32,
ospfExtProcessRouteSummaryN1Count
Integer32,
ospfExtProcessRouteSummaryN2Count
Integer32
}
ospfExtProcessIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ospf index."
::= { ospfExtProcessEntry 1 }
ospfExtProcessVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VRF Name to associate with this ospf."
::= { ospfExtProcessEntry 2 }
ospfExtProcessRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtProcessEntry 3 }
ospfExtProcessLsaSummaryRouterCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf router LSA count for specified process."
::= { ospfExtProcessEntry 4 }
ospfExtProcessLsaSummaryRouterMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf router LSA count in max age status for specified process."
::= { ospfExtProcessEntry 5 }
ospfExtProcessLsaSummaryNetworkCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf network LSA count for specified process."
::= { ospfExtProcessEntry 6 }
ospfExtProcessLsaSummaryNetworkMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf network LSA count in max age status for specified process."
::= { ospfExtProcessEntry 7 }
ospfExtProcessLsaSummaryNetCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary net LSA count for specified process."
::= { ospfExtProcessEntry 8 }
ospfExtProcessLsaSummaryNetMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary net LSA count in max age status for specified process."
::= { ospfExtProcessEntry 9 }
ospfExtProcessLsaSummaryASBRCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary ASBR LSA count for specified process."
::= { ospfExtProcessEntry 10 }
ospfExtProcessLsaSummaryASBRMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary ASBR LSA count in max age status for specified process."
::= { ospfExtProcessEntry 11 }
ospfExtProcessLsaSummaryType5ExtCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf type-5 Ext LSA count for specified process."
::= { ospfExtProcessEntry 12 }
ospfExtProcessLsaSummaryType5ExtMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf type-5 Ext LSA count in max age status for specified process."
::= { ospfExtProcessEntry 13 }
ospfExtProcessLsaSummaryAttributeCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf attribute LSA count for specified process."
::= { ospfExtProcessEntry 14 }
ospfExtProcessLsaSummaryAttributeMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf attribute LSA count in max age status for specified process."
::= { ospfExtProcessEntry 15 }
ospfExtProcessLsaSummaryOpaqueLinkCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf opaque link LSA count for specified process."
::= { ospfExtProcessEntry 16 }
ospfExtProcessLsaSummaryOpaqueLinkMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf opaque link LSA count in max age status for specified process."
::= { ospfExtProcessEntry 17 }
ospfExtProcessLsaSummaryOpaqueProcessCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf opaque area LSA count for specified process."
::= { ospfExtProcessEntry 18 }
ospfExtProcessLsaSummaryOpaqueProcessMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf opaque area LSA count in max age status for specified process."
::= { ospfExtProcessEntry 19 }
ospfExtProcessLsaSummaryOpaqueASCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf opaque AS LSA count for specified process."
::= { ospfExtProcessEntry 20 }
ospfExtProcessLsaSummaryOpaqueASMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Ospf opaque AS LSA count in max age status for specified process."
::= { ospfExtProcessEntry 21 }
ospfExtProcessRouteSummaryConnectedCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf connected route count for specified process."
::= { ospfExtProcessEntry 22 }
ospfExtProcessRouteSummaryDiscardCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf black-hole route count for specified process."
::= { ospfExtProcessEntry 23 }
ospfExtProcessRouteSummaryIntraAreaCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf intra area route count for specified process."
::= { ospfExtProcessEntry 24 }
ospfExtProcessRouteSummaryInterAreaCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf inter area route count for specified process."
::= { ospfExtProcessEntry 25 }
ospfExtProcessRouteSummaryExtType1Count OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf Ext type 1 route count for specified process."
::= { ospfExtProcessEntry 26 }
ospfExtProcessRouteSummaryExtType2Count OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf Ext type 2 route count for specified process."
::= { ospfExtProcessEntry 27 }
ospfExtProcessRouteSummaryN1Count OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf N1 route count for specified process."
::= { ospfExtProcessEntry 28 }
ospfExtProcessRouteSummaryN2Count OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf N2 route count for specified process."
::= { ospfExtProcessEntry 29 }
ospfExtBinding OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Binding ospf process to mib."
::= { ospfExt 2 }
ospfExtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of if entry."
::= { ospfExt 3 }
ospfExtIfEntry OBJECT-TYPE
SYNTAX OspfExtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Login entry."
INDEX { ospfExtIfIpAddress, ospfExtAddressLessIf}
::= { ospfExtIfTable 1 }
OspfExtIfEntry ::=
SEQUENCE
{
ospfExtIfIpAddress
IpAddress,
ospfExtAddressLessIf
Integer32,
ospfExtIfMtu
Integer32,
ospfExtIfCost
Integer32,
ospfExtIfOutgoingLSA
INTEGER,
ospfExtIfMtuIgnore
INTEGER,
-- modified by liuht for bug 23735 in 2013-07-08
-- ospfExtIfType
-- INTEGER,
-- ospfExtIfDisable
-- INTEGER,
ospfExtIfAuth
INTEGER,
ospfExtIfDeadInterval
Integer32,
ospfExtIfHelloInterval
Integer32,
ospfExtIfPri
Integer32,
ospfExtIfRetransInterval
Integer32,
ospfExtIfTransDelay
Integer32,
ospfExtIfDRRouterId
IpAddress,
ospfExtIfBackupDRRouterId
IpAddress,
ospfExtIfDbFilterFlag
INTEGER,
ospfExtIfHelloDue
OCTET STRING,
ospfExtIfNeighborCount
Gauge32,
ospfExtIfAdjacentNeighborCount
Gauge32,
ospfExtIfCryptSequenceNumber
Gauge32,
ospfExtIfHelloRecv
Gauge32,
ospfExtIfHelloSend
Gauge32,
ospfExtIfDDRecv
Gauge32,
ospfExtIfDDSend
Gauge32,
ospfExtIfLSReqRecv
Gauge32,
ospfExtIfLSReqSend
Gauge32,
ospfExtIfLSUpdRecv
Gauge32,
ospfExtIfLSUpdSend
Gauge32,
ospfExtIfLsAckRecv
Gauge32,
ospfExtIfLsAckSend
Gauge32,
ospfExtIfLsAckDiscard
Gauge32,
ospfExtIfTeMetric
Integer32
}
ospfExtIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of this OSPF interface."
::= { ospfExtIfEntry 1 }
ospfExtAddressLessIf OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { ospfExtIfEntry 2 }
ospfExtIfMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OSPF interface MTU.The range is 576-65535 and the default value is 1500."
::= { ospfExtIfEntry 3 }
ospfExtIfCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OSPF interface MTU.The range is 1-65535 and the default value is 1."
::= { ospfExtIfEntry 4 }
ospfExtIfOutgoingLSA OBJECT-TYPE
SYNTAX INTEGER
{
unset(1),
set(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter OSPF LSA during synchronization and flooding."
::= { ospfExtIfEntry 5 }
ospfExtIfMtuIgnore OBJECT-TYPE
SYNTAX INTEGER
{
unset(1),
set(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ignores the MTU in DBD packets."
::= { ospfExtIfEntry 6 }
-- modified by liuht for bug 23735 in 2013-07-08
--ospfExtIfType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- pointToPoint(1),
-- broadcast(2),
-- nonBroadcast(3),
-- pointToMultipoint(4),
-- pointToMultipointAndNonBroadcast(5),
-- none(6)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The OSPF interface type."
-- ::= { ospfExtIfEntry 7 }
--ospfExtIfDisable OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- disable(1),
-- enable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Disable OSPF."
-- ::= { ospfExtIfEntry 8 }
ospfExtIfAuth OBJECT-TYPE
SYNTAX INTEGER
{
noAuthentication(0),
simple(1),
message-digest(2),
unset(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Display authentication type."
::= { ospfExtIfEntry 9 }
ospfExtIfDeadInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OSPF dead interval, the default value is:
40(broadcast), 120(non-broadcast), 120(pointToMultipoint), 40(pointToPoint), 120(pointToMultipointAndNonBroadcast).."
::= { ospfExtIfEntry 10 }
ospfExtIfHelloInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OSPF hello interval, the default value is:
10(broadcast), 30(non-broadcast), 30(pointToMultipoint), 10(pointToPoint), 30(pointToMultipointAndNonBroadcast)."
::= { ospfExtIfEntry 11 }
ospfExtIfPri OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OSPF priority, the default value is 1."
::= { ospfExtIfEntry 12 }
ospfExtIfRetransInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OSPF retransmit interval, the default value is 5."
::= { ospfExtIfEntry 13 }
ospfExtIfTransDelay OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OSPF transmit delay, the default value is 1."
::= { ospfExtIfEntry 14 }
ospfExtIfDRRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The designated router id of this OSPF interface."
::= { ospfExtIfEntry 15 }
ospfExtIfBackupDRRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup designated router id of this OSPF interface."
::= { ospfExtIfEntry 16 }
ospfExtIfDbFilterFlag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The database filter flag of this OSPF interface."
::= { ospfExtIfEntry 17 }
ospfExtIfHelloDue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hello due time of this OSPF interface."
::= { ospfExtIfEntry 18 }
ospfExtIfNeighborCount OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The neighbor count of this OSPF interface."
::= { ospfExtIfEntry 19 }
ospfExtIfAdjacentNeighborCount OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The adjacent neighbor count id of this OSPF interface."
::= { ospfExtIfEntry 20 }
ospfExtIfCryptSequenceNumber OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The crypt sequence number of this OSPF interface."
::= { ospfExtIfEntry 21 }
ospfExtIfHelloRecv OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hello recieved count of this OSPF interface."
::= { ospfExtIfEntry 22 }
ospfExtIfHelloSend OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hello send count of this OSPF interface."
::= { ospfExtIfEntry 23 }
ospfExtIfDDRecv OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DD recieved count of this OSPF interface."
::= { ospfExtIfEntry 24 }
ospfExtIfDDSend OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DD send count of this OSPF interface."
::= { ospfExtIfEntry 25 }
ospfExtIfLSReqRecv OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LS req recieved count of this OSPF interface."
::= { ospfExtIfEntry 26 }
ospfExtIfLSReqSend OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LS req send count id of this OSPF interface."
::= { ospfExtIfEntry 27 }
ospfExtIfLSUpdRecv OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LS update recieved count of this OSPF interface."
::= { ospfExtIfEntry 28 }
ospfExtIfLSUpdSend OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LS update send count of this OSPF interface."
::= { ospfExtIfEntry 29 }
ospfExtIfLsAckRecv OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LS ack recieved count of this OSPF interface."
::= { ospfExtIfEntry 30 }
ospfExtIfLsAckSend OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LS ack send count of this OSPF interface."
::= { ospfExtIfEntry 31 }
ospfExtIfLsAckDiscard OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LS ack discard count of this OSPF interface."
::= { ospfExtIfEntry 32 }
--for bug 23740, 3.2 unsupport this node
ospfExtIfTeMetric OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"OSPF TE metric value."
::= { ospfExtIfEntry 33 }
ospfExtAreaStubTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtAreaStubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of area stub entry."
::= { ospfExt 4 }
ospfExtAreaStubEntry OBJECT-TYPE
SYNTAX OspfExtAreaStubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area stub entry."
INDEX { ospfExtAreaStubStat}
::= { ospfExtAreaStubTable 1 }
OspfExtAreaStubEntry ::=
SEQUENCE
{
ospfExtAreaStubStat
RowStatus,
ospfExtAreaStubNoSummary
INTEGER
}
ospfExtAreaStubStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtAreaStubEntry 1 }
ospfExtAreaStubNoSummary OBJECT-TYPE
SYNTAX INTEGER
{
noSummary(1),
summary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do not inject inter-area routes into stub."
::= { ospfExtAreaStubEntry 2 }
ospfExtFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of area stub entry."
::= { ospfExt 5 }
ospfExtFilterEntry OBJECT-TYPE
SYNTAX OspfExtFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area stub entry."
INDEX { ospfExtFilterId}
::= { ospfExtFilterTable 1 }
OspfExtFilterEntry ::=
SEQUENCE
{
ospfExtFilterId
Integer32,
ospfExtFilterPrefixIn
OCTET STRING,
ospfExtFilterPrefixOut
OCTET STRING,
ospfExtFilterAccessIn
OCTET STRING,
ospfExtFilterAccessOut
OCTET STRING
}
ospfExtFilterId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying an area."
::= { ospfExtFilterEntry 1 }
ospfExtFilterPrefixIn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of an IP prefix-list.Max length is 20."
::= { ospfExtFilterEntry 2 }
ospfExtFilterPrefixOut OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of an IP prefix-list.Max length is 20."
::= { ospfExtFilterEntry 3 }
ospfExtFilterAccessIn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of an access-list.Max length is 20."
::= { ospfExtFilterEntry 4 }
ospfExtFilterAccessOut OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of an access-list.Max length is 20."
::= { ospfExtFilterEntry 5 }
ospfExtSummaryAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtSummaryAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of summary address entry."
::= { ospfExt 6 }
ospfExtSummaryAddrEntry OBJECT-TYPE
SYNTAX OspfExtSummaryAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"summary address entry "
INDEX { ospfExtSummaryAddrStat}
::= { ospfExtSummaryAddrTable 1 }
OspfExtSummaryAddrEntry ::=
SEQUENCE
{
ospfExtSummaryAddrStat
RowStatus,
ospfExtSummaryAddrNotAdvertise
INTEGER,
ospfExtSummaryAddrTag
Gauge32,
ospfExtSummaryAddrMetric
Gauge32,
ospfExtSummaryAddrMetricType
INTEGER
}
ospfExtSummaryAddrStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtSummaryAddrEntry 1 }
ospfExtSummaryAddrNotAdvertise OBJECT-TYPE
SYNTAX INTEGER
{
noAdvertise(1),
advertise(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Suppress routes that match the prefix."
::= { ospfExtSummaryAddrEntry 2 }
ospfExtSummaryAddrTag OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set tag (0-4294967295)."
::= { ospfExtSummaryAddrEntry 3 }
ospfExtSummaryAddrMetric OBJECT-TYPE
SYNTAX Gauge32 (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary address metric value."
::= { ospfExtSummaryAddrEntry 4 }
ospfExtSummaryAddrMetricType OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF summary address metic type, the default value is 2, 0 means unspecified."
::= { ospfExtSummaryAddrEntry 5 }
ospfExtProperty OBJECT IDENTIFIER ::= { ospfExt 7 }
compatibleRfc OBJECT-TYPE
SYNTAX INTEGER
{
uncompatible(1),
compatible(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This should always write running-config to startup-config.
And the valid value is 1."
::= { ospfExtProperty 1 }
timersSpfDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delay between receiving a change to SPF calculation.
The range is 0-2147483647.Default value is 5."
::= { ospfExtProperty 2 }
timersSpfHold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hold time between consecutive SPF calculations.
The range is 0-2147483647.Default value is 10."
::= { ospfExtProperty 3 }
refreshTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Adjust refresh parameters.The range is 10-1800.Default value is 10."
::= { ospfExtProperty 4 }
referBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use reference bandwidth method to assign OSPF cost.
The range is 1-4294967.Default value is 100."
::= { ospfExtProperty 5 }
maxConcurrentDd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number allowed to process DD concurrently.
The range is 1-65535.Default value is 5."
::= { ospfExtProperty 6 }
maximumArea OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of ospf area.The range is 1-4294967294.Default value is 3000."
::= { ospfExtProperty 7 }
defaultMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set metric of redistributed routes.The range is 0-16777214.The unset value is -1."
::= { ospfExtProperty 8 }
distance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OSPF Administrative distance.The range is 1-255.The unset value is -1."
::= { ospfExtProperty 9 }
distanceIntra OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance for intra-area routes.The range is 1-255.The unset value is -1."
::= { ospfExtProperty 10 }
distanceInter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance for inter-area routes.The range is 1-255.
The unset value is -1."
::= { ospfExtProperty 11 }
distanceExternal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance for external routes.The range is 1-255.The unset value is -1."
::= { ospfExtProperty 12 }
ospfExtNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of neighbour entry."
::= { ospfExt 8 }
ospfExtNeighborEntry OBJECT-TYPE
SYNTAX OspfExtNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"neighbour address entry."
INDEX { ospfExtNeighborStat}
::= { ospfExtNeighborTable 1 }
OspfExtNeighborEntry ::=
SEQUENCE
{
ospfExtNeighborStat
RowStatus,
ospfExtNeighborPollInterval
Integer32,
ospfExtNeighborCost
Integer32,
ospfExtNeighborPri
Integer32,
ospfExtNeighborStateStr
INTEGER,
ospfExtNeighborDeadTimeStr
OCTET STRING,
ospfExtNeighborIpAddr
IpAddress,
ospfExtNeighborIfName
OCTET STRING
}
ospfExtNeighborStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize Destroy and Active."
::= { ospfExtNeighborEntry 1 }
ospfExtNeighborPollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OSPF dead-router polling interval.The range is 1-65535.
Default value is 120.The unset value is -1."
::= { ospfExtNeighborEntry 2 }
ospfExtNeighborCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OSPF neighbor cost value.The range is 1-65535.
The unset value is -1."
::= { ospfExtNeighborEntry 3 }
ospfExtNeighborPri OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OSPF neighbor priority, the unset value is -1."
::= { ospfExtNeighborEntry 4 }
ospfExtNeighborStateStr OBJECT-TYPE
SYNTAX INTEGER
{
dependUpon(0),
down(1),
attempt(2),
init(3),
twoway(4),
exStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF NeighborState.The range is 0-8."
::= { ospfExtNeighborEntry 5 }
ospfExtNeighborDeadTimeStr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF dead-router time string."
::= { ospfExtNeighborEntry 6 }
ospfExtNeighborIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF neighbor ip address."
::= { ospfExtNeighborEntry 7 }
ospfExtNeighborIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF neighbor interface name."
::= { ospfExtNeighborEntry 8 }
ospfExtRedistribute OBJECT IDENTIFIER ::= { ospfExt 9 }
redistributeBgp OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol."
::= { ospfExtRedistribute 1 }
redistributeBgpMetricType OBJECT-TYPE
SYNTAX INTEGER
{
reset(0),
type1(1),
type2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric type.The unset value is 0."
DEFVAL { type2 }
::= { ospfExtRedistribute 2 }
redistributeBgpMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric.
The range is 0-16777214.The unset value is -1."
::= { ospfExtRedistribute 3 }
redistributeBgpRouteMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol route map reference."
::= { ospfExtRedistribute 4 }
redistributeBgpTag OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol tag.The range is 0-4294967295."
::= { ospfExtRedistribute 5 }
redistributeConnected OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute connected."
::= { ospfExtRedistribute 6 }
redistributeConnectedMetricType OBJECT-TYPE
SYNTAX INTEGER
{
type1(1),
type2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric type.
The unset value is 0."
DEFVAL { type2 }
::= { ospfExtRedistribute 7 }
redistributeConnectedMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric.The range is 0-16777214.
The unset value is -1."
::= { ospfExtRedistribute 8 }
redistributeConnectedRouteMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol route map reference."
::= { ospfExtRedistribute 9 }
redistributeConnectedTag OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol tag.The range is 0-4294967295."
::= { ospfExtRedistribute 10 }
redistributeRip OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RedistributeRip routing information protocol."
::= { ospfExtRedistribute 11 }
redistributeRipMetricType OBJECT-TYPE
SYNTAX INTEGER
{
type1(1),
type2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric type.
The unset value is 0."
DEFVAL { type2 }
::= { ospfExtRedistribute 12 }
redistributeRipMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric.
The range is 0-16777214.The unset value is -1."
::= { ospfExtRedistribute 13 }
redistributeRipRouteMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol route map reference."
::= { ospfExtRedistribute 14 }
redistributeRipTag OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol tag.The range is 0-4294967295.
The unset value is -1."
::= { ospfExtRedistribute 15 }
redistributeStatic OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RedistributeRip static routes."
::= { ospfExtRedistribute 16 }
redistributeStaticMetricType OBJECT-TYPE
SYNTAX INTEGER
{
type1(1),
type2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric type.The unset value is 0."
DEFVAL { type2 }
::= { ospfExtRedistribute 17 }
redistributeStaticMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol metric.The range is 0-16777214.
The unset value is -1."
::= { ospfExtRedistribute 18 }
redistributeStaticRouteMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol route map reference."
::= { ospfExtRedistribute 19 }
redistributeStaticTag OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute border gateway protocol tag.The range is 0-4294967295."
::= { ospfExtRedistribute 20 }
redistributeBgpTagClr OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset redistribute Bgp."
::= { ospfExtRedistribute 21 }
redistributeConnectedTagClr OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset redistribute Connected."
::= { ospfExtRedistribute 22 }
redistributeRipTagClr OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset redistribute Rip."
::= { ospfExtRedistribute 23 }
redistributeStaticTagClr OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset redistribute Static"
::= { ospfExtRedistribute 24 }
ospfExtdistribute OBJECT IDENTIFIER ::= { ospfExt 10 }
ospfExtdistributeIn OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter incoming routing updates."
::= { ospfExtdistribute 1 }
ospfExtdistributeOutBgp OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter outgoing routing updates for bgp."
::= { ospfExtdistribute 2 }
ospfExtdistributeOutConnected OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter outgoing routing updates for connected."
::= { ospfExtdistribute 3 }
ospfExtdistributeOutRip OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter outgoing routing updates for rip."
::= { ospfExtdistribute 4 }
ospfExtdistributeOutStatic OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter outgoing routing updates for static."
::= { ospfExtdistribute 5 }
ospfExtOriginate OBJECT IDENTIFIER ::= { ospfExt 11 }
ospfExtOriginateEn OBJECT-TYPE
SYNTAX INTEGER
{
no(2),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control distribution of default information."
::= { ospfExtOriginate 1 }
ospfExtOriginateAlways OBJECT-TYPE
SYNTAX INTEGER
{
no(2),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Always advertise default route."
::= { ospfExtOriginate 2 }
ospfExtOriginateMetricType OBJECT-TYPE
SYNTAX INTEGER
{
type1(1),
type2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set OSPF metric type for default routes.The unset value is 0."
DEFVAL { type2 }
::= { ospfExtOriginate 3 }
ospfExtOriginateMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set OSPF default metric.The range is 0-16777214.The unset value is -1."
::= { ospfExtOriginate 4 }
ospfExtOriginateRouteMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Route map reference."
::= { ospfExtOriginate 5 }
ospfExtNetworkTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of area stub entry."
::= { ospfExt 12 }
ospfExtNetworkEntry OBJECT-TYPE
SYNTAX OspfExtNetworkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network entry"
INDEX { ospfExtNetworkArea}
::= { ospfExtNetworkTable 1 }
OspfExtNetworkEntry ::=
SEQUENCE
{
ospfExtNetworkArea
IpAddress,
ospfExtNetworkRowStatus
RowStatus
}
ospfExtNetworkArea OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"OSPF area ID in IP address format."
::= { ospfExtNetworkEntry 1 }
ospfExtNetworkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtNetworkEntry 2 }
ospfExtPassiveIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtPassiveIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of passive interface entry."
::= { ospfExt 13 }
ospfExtPassiveIfEntry OBJECT-TYPE
SYNTAX OspfExtPassiveIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network entry "
INDEX { ospfExtPassiveIfId}
::= { ospfExtPassiveIfTable 1 }
OspfExtPassiveIfEntry ::=
SEQUENCE
{
ospfExtPassiveIfId
Integer32,
ospfExtPassiveIfName
OCTET STRING,
ospfExtPassiveIfStatus
RowStatus
}
ospfExtPassiveIfId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface's id."
::= { ospfExtPassiveIfEntry 1 }
ospfExtPassiveIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface's name."
::= { ospfExtPassiveIfEntry 2 }
ospfExtPassiveIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtPassiveIfEntry 3 }
--
-- ospfExtMsgDigestKeyTable
--
ospfExtMsgDigestKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtMsgDigestKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of digest-key entry."
::= { ospfExt 14 }
ospfExtMsgDigestKeyEntry OBJECT-TYPE
SYNTAX OspfExtMsgDigestKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ospfExtMsgDigestKeyIfindex,ospfExtMsgDigestKeyId }
::= { ospfExtMsgDigestKeyTable 1 }
OspfExtMsgDigestKeyEntry ::=
SEQUENCE
{
ospfExtMsgDigestKeyIfindex
Integer32,
ospfExtMsgDigestKeyId
Integer32,
ospfExtMsgDigestKeyPwd
OCTET STRING,
ospfExtMsgDigestKeyStatus
RowStatus
}
ospfExtMsgDigestKeyIfindex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface's id."
::= { ospfExtMsgDigestKeyEntry 1 }
ospfExtMsgDigestKeyId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"digest key's id."
::= { ospfExtMsgDigestKeyEntry 2 }
ospfExtMsgDigestKeyPwd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"digest key password."
::= { ospfExtMsgDigestKeyEntry 3 }
ospfExtMsgDigestKeyStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtMsgDigestKeyEntry 4 }
-- The OSPF Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area
--
-- ospfExtAreaTable
--
ospfExtAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of area authentication entry."
::= { ospfExt 15 }
ospfExtAreaEntry OBJECT-TYPE
SYNTAX OspfExtAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area authentication entry."
INDEX { ospfExtAreaId }
::= { ospfExtAreaTable 1 }
OspfExtAreaEntry ::=
SEQUENCE
{
ospfExtAreaId
IpAddress,
ospfExtAreaDefaultCost
Integer32,
--modified by liuht for bug 23742,2013-07-09
-- ospfExtAreaRowStatus
-- RowStatus,
ospfExtAreaAuthType
INTEGER,
ospfExtAreaLsaSummaryRouterCount
Integer32,
ospfExtAreaLsaSummaryRouterMaxAge
Integer32,
ospfExtAreaLsaSummaryNetworkCount
Integer32,
ospfExtAreaLsaSummaryNetworkMaxAge
Integer32,
ospfExtAreaLsaSummaryNetCount
Integer32,
ospfExtAreaLsaSummaryNetMaxAge
Integer32,
ospfExtAreaLsaSummaryASBRCount
Integer32,
ospfExtAreaLsaSummaryASBRMaxAge
Integer32,
ospfExtAreaLsaSummaryType5ExtCount
Integer32,
ospfExtAreaLsaSummaryType5ExtMaxAge
Integer32,
ospfExtAreaLsaSummaryAttributeCount
Integer32,
ospfExtAreaLsaSummaryAttributeMaxAge
Integer32,
ospfExtAreaLsaSummaryOpaqueLinkCount
Integer32,
ospfExtAreaLsaSummaryOpaqueLinkMaxAge
Integer32,
ospfExtAreaLsaSummaryOpaqueAreaCount
Integer32,
ospfExtAreaLsaSummaryOpaqueAreaMaxAge
Integer32,
ospfExtAreaLsaSummaryOpaqueASCount
Integer32,
ospfExtAreaLsaSummaryOpaqueASMaxAge
Integer32
}
ospfExtAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone."
::= { ospfExtAreaEntry 1 }
ospfExtAreaDefaultCost OBJECT-TYPE
SYNTAX Integer32 (1..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ospf area default cost."
::= { ospfExtAreaEntry 2 }
--modified by liuht for bug 23742,2013-07-09
--ospfExtAreaRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row.Now only realize CreateAndGo
-- and Destroy and Active.
-- 1 means Active
-- 4 means CreateAndGo
-- 6 means Destroy"
-- ::= { ospfExtAreaEntry 5 }
ospfExtAreaAuthType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
simplePassword(1),
md5(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use message-digest authentication."
::= { ospfExtAreaEntry 6 }
ospfExtAreaLsaSummaryRouterCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf router LSA count for specified area."
::= { ospfExtAreaEntry 7 }
ospfExtAreaLsaSummaryRouterMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf router LSA count in max age status for specified area."
::= { ospfExtAreaEntry 8 }
ospfExtAreaLsaSummaryNetworkCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf network LSA count for specified area."
::= { ospfExtAreaEntry 9 }
ospfExtAreaLsaSummaryNetworkMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf network LSA count in max age status for specified area."
::= { ospfExtAreaEntry 10 }
ospfExtAreaLsaSummaryNetCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary net LSA count for specified area."
::= { ospfExtAreaEntry 11 }
ospfExtAreaLsaSummaryNetMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary net LSA count in max age status for specified area."
::= { ospfExtAreaEntry 12 }
ospfExtAreaLsaSummaryASBRCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary ASBR LSA count for specified area."
::= { ospfExtAreaEntry 13 }
ospfExtAreaLsaSummaryASBRMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf summary ASBR LSA count in max age status for specified area."
::= { ospfExtAreaEntry 14 }
ospfExtAreaLsaSummaryType5ExtCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf type-5 Ext LSA count for specified area."
::= { ospfExtAreaEntry 15 }
ospfExtAreaLsaSummaryType5ExtMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf type-5 Ext LSA count in max age status for specified area."
::= { ospfExtAreaEntry 16 }
ospfExtAreaLsaSummaryAttributeCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf attribute LSA count for specified area."
::= { ospfExtAreaEntry 17 }
ospfExtAreaLsaSummaryAttributeMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf attribute LSA count in max age status for specified area."
::= { ospfExtAreaEntry 18 }
ospfExtAreaLsaSummaryOpaqueLinkCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf opaque link LSA count for specified area."
::= { ospfExtAreaEntry 19 }
ospfExtAreaLsaSummaryOpaqueLinkMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf opaque link LSA count in max age status for specified area."
::= { ospfExtAreaEntry 20 }
ospfExtAreaLsaSummaryOpaqueAreaCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf opaque area LSA count for specified area."
::= { ospfExtAreaEntry 21 }
ospfExtAreaLsaSummaryOpaqueAreaMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf opaque area LSA count in max age status for specified area."
::= { ospfExtAreaEntry 22 }
ospfExtAreaLsaSummaryOpaqueASCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf opaque AS LSA count for specified area."
::= { ospfExtAreaEntry 23 }
ospfExtAreaLsaSummaryOpaqueASMaxAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ospf opaque AS LSA count in max age status for specified area."
::= { ospfExtAreaEntry 24 }
--
-- ospfExtAreaRangeTable
--
ospfExtAreaRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtAreaRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of area range entry."
::= { ospfExt 16 }
ospfExtAreaRangeEntry OBJECT-TYPE
SYNTAX OspfExtAreaRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area range entry."
INDEX { ospfExtAreaRangeRowStatus}
::= { ospfExtAreaRangeTable 1 }
OspfExtAreaRangeEntry ::=
SEQUENCE
{
ospfExtAreaRangeRowStatus
RowStatus,
ospfExtAreaRangeAdvertise
INTEGER
}
ospfExtAreaRangeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtAreaRangeEntry 5 }
ospfExtAreaRangeAdvertise OBJECT-TYPE
SYNTAX INTEGER
{
advertise(1),
noAdvertise(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use message-digest authentication."
::= { ospfExtAreaRangeEntry 6 }
--
-- ospfExtAreaVirtualLinkTable
--
ospfExtAreaVirtualLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtAreaVirtualLinkEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table of area virtual link entry."
::= { ospfExt 17 }
ospfExtAreaVirtualLinkEntry OBJECT-TYPE
SYNTAX OspfExtAreaVirtualLinkEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Area virtual link entry."
INDEX { ospfExtAreaVirtualLinkAreaId, ospfExtAreaVirtualLinkIpAddr}
::= { ospfExtAreaVirtualLinkTable 1 }
OspfExtAreaVirtualLinkEntry ::=
SEQUENCE
{
ospfExtAreaVirtualLinkAreaId
IpAddress,
ospfExtAreaVirtualLinkIpAddr
IpAddress,
ospfExtAreaVirtualLinkDeadInterval
Integer32,
ospfExtAreaVirtualLinkHelloInterval
Integer32,
ospfExtAreaVirtualLinkRetransInterval
Integer32,
ospfExtAreaVirtualLinkTransDelay
Integer32,
ospfExtAreaVirtualLinkAuthKey
OCTET STRING,
ospfExtAreaVirtualLinkRowStatus
RowStatus,
ospfExtAreaVirtualLinkAuthClr
INTEGER,
ospfExtAreaVirtualLinkStat
INTEGER,
ospfExtAreaVirtualLinkIfName
OCTET STRING,
ospfExtAreaVirtualLinkLocalAddr
IpAddress,
ospfExtAreaVirtualLinkRemoteAddr
IpAddress,
ospfExtAreaVirtualLinkHelloDue
OCTET STRING,
ospfExtAreaVirtualLinkAdjacencyState
INTEGER
}
ospfExtAreaVirtualLinkAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "The OSPF area ID."
::= { ospfExtAreaVirtualLinkEntry 1 }
ospfExtAreaVirtualLinkIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The ID(ip address) associated with virtual link neighbor."
::= { ospfExtAreaVirtualLinkEntry 2 }
ospfExtAreaVirtualLinkDeadInterval OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The OSPF virtual link dead interval, the default value is 40."
::= { ospfExtAreaVirtualLinkEntry 3 }
ospfExtAreaVirtualLinkHelloInterval OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The OSPF virtual link hello interval, the default value is 10."
::= { ospfExtAreaVirtualLinkEntry 4 }
ospfExtAreaVirtualLinkRetransInterval OBJECT-TYPE
SYNTAX Integer32(1..3600)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The OSPF virtual link retransmit interval, the default value is 5."
::= { ospfExtAreaVirtualLinkEntry 5 }
ospfExtAreaVirtualLinkTransDelay OBJECT-TYPE
SYNTAX Integer32(1..3600)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The OSPF virtual link transmit delay, the default value is 1."
::= { ospfExtAreaVirtualLinkEntry 6 }
ospfExtAreaVirtualLinkAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The OSPF virtual link authentication key."
::= { ospfExtAreaVirtualLinkEntry 7 }
ospfExtAreaVirtualLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent."
::= { ospfExtAreaVirtualLinkEntry 10 }
ospfExtAreaVirtualLinkAuthClr OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
simplePassword(1),
md5(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Enable authentication, the default value is 0."
::= { ospfExtAreaVirtualLinkEntry 11 }
ospfExtAreaVirtualLinkStat OBJECT-TYPE
SYNTAX INTEGER
{
dependUpon(0),
down(1),
loopback(2),
waiting(3),
pointTopoint(4),
drOther(5),
backup(6),
dr(7)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The OSPF virtual link status.Range is 0-7."
::= { ospfExtAreaVirtualLinkEntry 12 }
ospfExtAreaVirtualLinkIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The OSPF virtual link interface name."
::= { ospfExtAreaVirtualLinkEntry 13 }
ospfExtAreaVirtualLinkLocalAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The OSPF virtual link local address."
::= { ospfExtAreaVirtualLinkEntry 14 }
ospfExtAreaVirtualLinkRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The OSPF virtual link remote address."
::= { ospfExtAreaVirtualLinkEntry 15 }
ospfExtAreaVirtualLinkHelloDue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The OSPF virtual link hello due."
::= { ospfExtAreaVirtualLinkEntry 16 }
ospfExtAreaVirtualLinkAdjacencyState OBJECT-TYPE
SYNTAX INTEGER
{
dependUpon(0),
down(1),
attempt(2),
init(3),
twoway(4),
exStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The OSPF virtual link adjacency state, range is 0-8."
::= { ospfExtAreaVirtualLinkEntry 17 }
--
-- ospfExtAreaVirtualLinkMsgDigestKeyTable
--
ospfExtAreaVirtualLinkMsgDigestKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtAreaVirtualLinkMsgDigestKeyEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table of area authentication entry."
::= { ospfExt 18 }
ospfExtAreaVirtualLinkMsgDigestKeyEntry OBJECT-TYPE
SYNTAX OspfExtAreaVirtualLinkMsgDigestKeyEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Area authentication entry."
INDEX { ospfExtAreaVirtualLinkMsgDigestKeyRowStatus}
::= { ospfExtAreaVirtualLinkMsgDigestKeyTable 1 }
OspfExtAreaVirtualLinkMsgDigestKeyEntry ::=
SEQUENCE
{
ospfExtAreaVirtualLinkMsgDigestKeyRowStatus
RowStatus,
ospfExtAreaVirtualLinkMsgDigestKeyPwd
OCTET STRING
}
ospfExtAreaVirtualLinkMsgDigestKeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ospfExtAreaVirtualLinkMsgDigestKeyEntry 1 }
ospfExtAreaVirtualLinkMsgDigestKeyPwd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Area virtual link digest key password."
::= { ospfExtAreaVirtualLinkMsgDigestKeyEntry 2 }
--
-- ospfExtRouterLsdbTable
--
ospfExtRouterLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtRouterLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of OSPF router LSDB."
::= { ospfExt 19 }
ospfExtRouterLsdbEntry OBJECT-TYPE
SYNTAX OspfExtRouterLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single instance of LSDB entry."
INDEX { ospfExtRouterLsaId}
::= { ospfExtRouterLsdbTable 1 }
OspfExtRouterLsdbEntry ::=
SEQUENCE
{
ospfExtRouterLsaId
Integer32,
ospfExtRouterLsaAge
Integer32,
ospfExtRouterLsaOption
OCTET STRING,
ospfExtRouterLsaAdvRouter
IpAddress,
ospfExtRouterLsaSeq
Gauge32,
ospfExtRouterLsaChkSum
Integer32,
ospfExtRouterLsaLinkCount
Integer32,
ospfExtRouterLsaOpaqueID
Integer32,
ospfExtRouterLsaOpaqueType
INTEGER,
ospfExtRouterLsaLength
Integer32
}
ospfExtRouterLsaId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA id."
::= { ospfExtRouterLsdbEntry 1 }
ospfExtRouterLsaAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA aging time."
::= { ospfExtRouterLsdbEntry 2 }
ospfExtRouterLsaOption OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA option string."
::= { ospfExtRouterLsdbEntry 3 }
ospfExtRouterLsaAdvRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA ADV Router."
::= { ospfExtRouterLsdbEntry 4 }
ospfExtRouterLsaSeq OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA sequence number."
::= { ospfExtRouterLsdbEntry 5 }
ospfExtRouterLsaChkSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtRouterLsdbEntry 6 }
ospfExtRouterLsaLinkCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA link count."
::= { ospfExtRouterLsdbEntry 7 }
ospfExtRouterLsaOpaqueID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA tag, used by summary LSA and AS external LSA."
::= { ospfExtRouterLsdbEntry 8 }
ospfExtRouterLsaOpaqueType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA opaque type."
::= { ospfExtRouterLsdbEntry 9 }
ospfExtRouterLsaLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtRouterLsdbEntry 10 }
--
-- ospfExtNetworkLsdbTable
--
ospfExtNetworkLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtNetworkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of OSPF network LSDB."
::= { ospfExt 20 }
ospfExtNetworkLsdbEntry OBJECT-TYPE
SYNTAX OspfExtNetworkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single instance of LSDB entry."
INDEX { ospfExtNetworkLsaId}
::= { ospfExtNetworkLsdbTable 1 }
OspfExtNetworkLsdbEntry ::=
SEQUENCE
{
ospfExtNetworkLsaId
Integer32,
ospfExtNetworkLsaAge
Integer32,
ospfExtNetworkLsaOption
OCTET STRING,
ospfExtNetworkLsaAdvRouter
IpAddress,
ospfExtNetworkLsaSeq
Gauge32,
ospfExtNetworkLsaChkSum
Integer32,
ospfExtNetworkLsaOpaqueID
Integer32,
ospfExtNetworkLsaOpaqueType
INTEGER,
ospfExtNetworkLsaLength
Integer32,
ospfExtNetworkLsaNetworkMask
IpAddress
}
ospfExtNetworkLsaId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA id."
::= { ospfExtNetworkLsdbEntry 1 }
ospfExtNetworkLsaAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA aging time."
::= { ospfExtNetworkLsdbEntry 2 }
ospfExtNetworkLsaOption OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA option string."
::= { ospfExtNetworkLsdbEntry 3 }
ospfExtNetworkLsaAdvRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA ADV Router."
::= { ospfExtNetworkLsdbEntry 4 }
ospfExtNetworkLsaSeq OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA sequence number."
::= { ospfExtNetworkLsdbEntry 5 }
ospfExtNetworkLsaChkSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtNetworkLsdbEntry 6 }
ospfExtNetworkLsaOpaqueID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA tag, used by summary LSA and AS external LSA."
::= { ospfExtNetworkLsdbEntry 8 }
ospfExtNetworkLsaOpaqueType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA opaque type."
::= { ospfExtNetworkLsdbEntry 9 }
ospfExtNetworkLsaLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtNetworkLsdbEntry 10 }
ospfExtNetworkLsaNetworkMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA network mask, used by network, summary,summary_asbr LSA."
::= { ospfExtNetworkLsdbEntry 11 }
--
-- ospfExtSummaryLsdbTable
--
ospfExtSummaryLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtSummaryLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of OSPF summary LSDB."
::= { ospfExt 21 }
ospfExtSummaryLsdbEntry OBJECT-TYPE
SYNTAX OspfExtSummaryLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single instance of LSDB entry."
INDEX { ospfExtSummaryLsaId}
::= { ospfExtSummaryLsdbTable 1 }
OspfExtSummaryLsdbEntry ::=
SEQUENCE
{
ospfExtSummaryLsaId
Integer32,
ospfExtSummaryLsaAge
Integer32,
ospfExtSummaryLsaOption
OCTET STRING,
ospfExtSummaryLsaAdvRouter
IpAddress,
ospfExtSummaryLsaSeq
Gauge32,
ospfExtSummaryLsaChkSum
Integer32,
ospfExtSummaryLsaOpaqueID
Integer32,
ospfExtSummaryLsaOpaqueType
INTEGER,
ospfExtSummaryLsaLength
Integer32,
ospfExtSummaryLsaNetworkMask
IpAddress,
ospfExtSummaryLsaTos0Metric
Integer32
}
ospfExtSummaryLsaId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA id."
::= { ospfExtSummaryLsdbEntry 1 }
ospfExtSummaryLsaAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA aging time."
::= { ospfExtSummaryLsdbEntry 2 }
ospfExtSummaryLsaOption OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA option string."
::= { ospfExtSummaryLsdbEntry 3 }
ospfExtSummaryLsaAdvRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA ADV Router."
::= { ospfExtSummaryLsdbEntry 4 }
ospfExtSummaryLsaSeq OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA sequence number."
::= { ospfExtSummaryLsdbEntry 5 }
ospfExtSummaryLsaChkSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtSummaryLsdbEntry 6 }
ospfExtSummaryLsaOpaqueID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA tag, used by summary LSA and AS external LSA."
::= { ospfExtSummaryLsdbEntry 8 }
ospfExtSummaryLsaOpaqueType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA opaque type."
::= { ospfExtSummaryLsdbEntry 9 }
ospfExtSummaryLsaLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtSummaryLsdbEntry 10 }
ospfExtSummaryLsaNetworkMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA network mask, used by network, summary,summary_asbr LSA."
::= { ospfExtSummaryLsdbEntry 11 }
ospfExtSummaryLsaTos0Metric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA TOS0 metric value, used by summary, summary_asbr, as_external LSA."
::= { ospfExtSummaryLsdbEntry 12 }
--
-- ospfExtSummaryAsbrLsdbTable
--
ospfExtSummaryAsbrLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtSummaryAsbrLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of OSPF Summary ASBR LSDB."
::= { ospfExt 22 }
ospfExtSummaryAsbrLsdbEntry OBJECT-TYPE
SYNTAX OspfExtSummaryAsbrLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single instance of LSDB entry."
INDEX { ospfExtSummaryAsbrLsaId}
::= { ospfExtSummaryAsbrLsdbTable 1 }
OspfExtSummaryAsbrLsdbEntry ::=
SEQUENCE
{
ospfExtSummaryAsbrLsaId
Integer32,
ospfExtSummaryAsbrLsaAge
Integer32,
ospfExtSummaryAsbrLsaOption
OCTET STRING,
ospfExtSummaryAsbrLsaAdvRouter
IpAddress,
ospfExtSummaryAsbrLsaSeq
Gauge32,
ospfExtSummaryAsbrLsaChkSum
Integer32,
ospfExtSummaryAsbrLsaOpaqueID
Integer32,
ospfExtSummaryAsbrLsaOpaqueType
INTEGER,
ospfExtSummaryAsbrLsaLength
Integer32,
ospfExtSummaryAsbrLsaNetworkMask
IpAddress,
ospfExtSummaryAsbrLsaTos0Metric
Integer32
}
ospfExtSummaryAsbrLsaId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA id."
::= { ospfExtSummaryAsbrLsdbEntry 1 }
ospfExtSummaryAsbrLsaAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA aging time."
::= { ospfExtSummaryAsbrLsdbEntry 2 }
ospfExtSummaryAsbrLsaOption OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA option string."
::= { ospfExtSummaryAsbrLsdbEntry 3 }
ospfExtSummaryAsbrLsaAdvRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA ADV Router."
::= { ospfExtSummaryAsbrLsdbEntry 4 }
ospfExtSummaryAsbrLsaSeq OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA sequence number."
::= { ospfExtSummaryAsbrLsdbEntry 5 }
ospfExtSummaryAsbrLsaChkSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtSummaryAsbrLsdbEntry 6 }
ospfExtSummaryAsbrLsaOpaqueID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA tag, used by summary LSA and AS external LSA."
::= { ospfExtSummaryAsbrLsdbEntry 8 }
ospfExtSummaryAsbrLsaOpaqueType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA opaque type."
::= { ospfExtSummaryAsbrLsdbEntry 9 }
ospfExtSummaryAsbrLsaLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtSummaryAsbrLsdbEntry 10 }
ospfExtSummaryAsbrLsaNetworkMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA network mask, used by network, summary,summary_asbr LSA."
::= { ospfExtSummaryAsbrLsdbEntry 11 }
ospfExtSummaryAsbrLsaTos0Metric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA TOS0 metric value, used by summary, summary_asbr, as_external LSA."
::= { ospfExtSummaryAsbrLsdbEntry 12 }
--
-- ospfExtAsExtLsdbTable
--
ospfExtAsExtLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtAsExtLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of OSPF AS external LSDB."
::= { ospfExt 23 }
ospfExtAsExtLsdbEntry OBJECT-TYPE
SYNTAX OspfExtAsExtLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single instance of LSDB entry."
INDEX { ospfExtAsExtLsaId}
::= { ospfExtAsExtLsdbTable 1 }
OspfExtAsExtLsdbEntry ::=
SEQUENCE
{
ospfExtAsExtLsaId
Integer32,
ospfExtAsExtLsaAge
Integer32,
ospfExtAsExtLsaOption
OCTET STRING,
ospfExtAsExtLsaAdvRouter
IpAddress,
ospfExtAsExtLsaSeq
Gauge32,
ospfExtAsExtLsaChkSum
Integer32,
ospfExtAsExtLsaOpaqueID
Integer32,
ospfExtAsExtLsaOpaqueType
INTEGER,
ospfExtAsExtLsaLength
Integer32,
ospfExtAsExtLsaNetworkMask
IpAddress,
ospfExtAsExtLsaTos0Metric
Integer32,
ospfExtAsExtLsaMetricType
INTEGER,
ospfExtAsExtLsaForwardAddress
IpAddress,
ospfExtAsExtLsaExternalRouteTag
Integer32
}
ospfExtAsExtLsaId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA id."
::= { ospfExtAsExtLsdbEntry 1 }
ospfExtAsExtLsaAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA aging time."
::= { ospfExtAsExtLsdbEntry 2 }
ospfExtAsExtLsaOption OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA option string."
::= { ospfExtAsExtLsdbEntry 3 }
ospfExtAsExtLsaAdvRouter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA ADV Router."
::= { ospfExtAsExtLsdbEntry 4 }
ospfExtAsExtLsaSeq OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA sequence number."
::= { ospfExtAsExtLsdbEntry 5 }
ospfExtAsExtLsaChkSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtAsExtLsdbEntry 6 }
ospfExtAsExtLsaOpaqueID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA tag, used by summary LSA and AS external LSA."
::= { ospfExtAsExtLsdbEntry 8 }
ospfExtAsExtLsaOpaqueType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA opaque type."
::= { ospfExtAsExtLsdbEntry 9 }
ospfExtAsExtLsaLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA check sum."
::= { ospfExtAsExtLsdbEntry 10 }
ospfExtAsExtLsaNetworkMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA network mask, used by network, summary,summary_asbr LSA."
::= { ospfExtAsExtLsdbEntry 11 }
ospfExtAsExtLsaTos0Metric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA TOS0 metric value, used by summary, summary_asbr, as_external LSA."
::= { ospfExtAsExtLsdbEntry 12 }
ospfExtAsExtLsaMetricType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA metric type, used by as_external LSA."
::= { ospfExtAsExtLsdbEntry 13 }
ospfExtAsExtLsaForwardAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA forward address, used by as_external LSA."
::= { ospfExtAsExtLsdbEntry 14 }
ospfExtAsExtLsaExternalRouteTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF LSA external route tag, used by as_external LSA."
::= { ospfExtAsExtLsdbEntry 15 }
ospfExtGeneralGroup OBJECT IDENTIFIER ::= { ospfExt 30 }
ospfRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addresses."
::= { ospfExtGeneralGroup 1 }
ospfExtSysUpTime OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF process up time."
::= { ospfExtGeneralGroup 2 }
ospfExtVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRF name which the OSPF process bind to."
::= { ospfExtGeneralGroup 3 }
ospfCompatibleRfc OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RFC2328, and RFC1583 Compatibility state."
::= { ospfExtGeneralGroup 4 }
ospfOpaqueCapable OBJECT-TYPE
SYNTAX INTEGER
{
unsupport(0),
support(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The opaque support capability."
::= { ospfExtGeneralGroup 5 }
ospfAbrType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF ABR type."
::= { ospfExtGeneralGroup 6 }
ospfAbsr OBJECT-TYPE
SYNTAX INTEGER
{
notABSR(0),
isABSR(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To show if this router is an ASBR."
::= { ospfExtGeneralGroup 7 }
ospfDdCountIn OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of incomming current DD exchange neighbors."
::= { ospfExtGeneralGroup 8 }
ospfDdCountOut OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of outgoing current DD exchange neighbors."
::= { ospfExtGeneralGroup 9 }
ospfMaxDd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DD."
::= { ospfExtGeneralGroup 10 }
ospfExternalLsaCount OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of external LSA."
::= { ospfExtGeneralGroup 11 }
ospfExternalLsaChecksum OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External LSA checksum."
::= { ospfExtGeneralGroup 12 }
ospfNoDefaultExternalLsaCount OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of non-default external LSA."
::= { ospfExtGeneralGroup 13 }
ospfExternalLsaDbLimit OBJECT-TYPE
SYNTAX INTEGER
{
unlimit(0),
limit(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External LSA database limit state"
::= { ospfExtGeneralGroup 14 }
ospfLsDbLimit OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LSDB database overflow limit."
::= { ospfExtGeneralGroup 15 }
ospfLsaOrgCount OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of LSA originated."
::= { ospfExtGeneralGroup 16 }
ospfLsaRcvCount OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of LSA received."
::= { ospfExtGeneralGroup 17 }
ospfExtLsdbLimitInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"before set this node,please set the node ospfExtLsdbLimitNumber first.
The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external-LSAs. When
set to 0, the router will not leave Overflow-
State until restarted."
DEFVAL { 0 }
::= { ospfExtGeneralGroup 18 }
ospfExtLsdbLimitNumber OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfExtLsdbLimit, the router enters Overflow-
State. The router never holds more than
ospfExtLsdbLimit non-default AS-external-LSAs
in its database. OspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area. (i.e.,
OSPF stub areas and NSSAs are excluded)."
DEFVAL { -1 }
::= { ospfExtGeneralGroup 19 }
-- Sub Module: USER
--
-- Textual conventions
--
LoginType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specify severity level of message."
SYNTAX INTEGER
{
nologin(1),
login(2),
loginlocal(3)
}
--
-- Node definitions
--
lineTable OBJECT-TYPE
SYNTAX SEQUENCE OF LineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"describe the login line property."
::= { user 1 }
lineEntry OBJECT-TYPE
SYNTAX LineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"describe the login property."
INDEX { lineType, lineIndex }
::= { lineTable 1 }
LineEntry ::=
SEQUENCE
{
lineType
INTEGER,
lineIndex
INTEGER,
lineLoginMode
LoginType,
linePassword
OCTET STRING ,
linePriviledge
INTEGER,
lineExecTimeoutmin
INTEGER,
lineExecTimeoutsec
INTEGER,
lineAccessInName
OCTET STRING,
lineTransportType
INTEGER,
linePasswordType
INTEGER
}
lineType OBJECT-TYPE
SYNTAX INTEGER
{
console(0),
vty(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The line type.
0 console.
1 vty."
::= { lineEntry 1 }
lineIndex OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The line number.index range 0~7."
::= { lineEntry 2 }
lineLoginMode OBJECT-TYPE
SYNTAX LoginType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line login mode.
1 no login.
2 login.
3 login local."
::= { lineEntry 3 }
linePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line password."
::= { lineEntry 4 }
linePriviledge OBJECT-TYPE
SYNTAX INTEGER(1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The line priviledge. The valid range is [1, 4]."
::= { lineEntry 5 }
lineExecTimeoutmin OBJECT-TYPE
SYNTAX INTEGER(0..35791)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The exec mode timeout minute value."
::= { lineEntry 6 }
lineExecTimeoutsec OBJECT-TYPE
SYNTAX INTEGER(0..2147483)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The exec mode timeout second value."
::= { lineEntry 7 }
lineAccessInName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The access name applied for vty. The first character of the name must be in [a-zA-Z0-9]."
::= { lineEntry 8 }
lineTransportType OBJECT-TYPE
SYNTAX INTEGER
{
all(0),
ssh(1),
telnet(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vty line Transport type.
0 all.
1 ssh.
2 telnet.
3 none."
::= { lineEntry 9 }
linePasswordType OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Password type.
0 not set password.
1 not encrypted password.
2 encrypted password."
::= { lineEntry 10 }
usernameTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsernameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of loghost."
::= { user 2 }
usernameEntry OBJECT-TYPE
SYNTAX UsernameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of user."
INDEX { usernameIndex }
::= { usernameTable 1 }
UsernameEntry ::=
SEQUENCE
{
usernameIndex
Integer32,
username
OCTET STRING,
password
OCTET STRING,
userPrivilege
Integer32,
userPwdType
INTEGER,
usernameRowStatus
RowStatus
}
usernameIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The username table index."
::= { usernameEntry 1 }
username OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The username. Can only include [0-9a-zA-Z.-_], and must starting with alphanumeric. Its length range is [1, 32)"
::= { usernameEntry 2 }
password OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password.
If type is secretForUser or normalPwd, the valid range of length is [1,64).
If type is hiddenPwd, the valid range of length is [1,128]."
::= { usernameEntry 3 }
userPrivilege OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user privilege <1-4>."
::= { usernameEntry 4 }
userPwdType OBJECT-TYPE
SYNTAX INTEGER
{
secretForUser(1),
hiddenPwd(2),
normalPwd(3),
notsetPwd(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user password type.
1 secretForUser.
2 hiddenPwd.
3 normalPwd.
4 notsetPwd."
::= { usernameEntry 5 }
usernameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { usernameEntry 6 }
enablePasswordTable OBJECT-TYPE ---{{{1
SYNTAX SEQUENCE OF EnablePasswordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of enable password."
::= { user 3 }
enablePasswordEntry OBJECT-TYPE
SYNTAX EnablePasswordEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of enable password."
INDEX { privilegeIndex }
::= { enablePasswordTable 1 }
EnablePasswordEntry ::=
SEQUENCE {
privilegeIndex
Integer32,
passwordType
INTEGER,
enablePassword
OCTET STRING,
enableRowStatus
RowStatus
}
privilegeIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The enable password table index."
::= { enablePasswordEntry 1 }
passwordType OBJECT-TYPE
SYNTAX INTEGER
{
secretForUser(1),
hiddenPwd(2),
normalPwd(3),
notsetPwd(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password type.
1 secretForUser.
2 hiddenPwd.
3 normalPwd.
The value notsetPwd(4) is only for the return value and not support
configured."
::= { enablePasswordEntry 2 }
enablePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The enable password.
If type is secretForUser or normalPwd, the valid range of length is [1,64).
If type is hiddenPwd, the valid range of length is [1,128]."
::= { enablePasswordEntry 3 }
enableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { enablePasswordEntry 4 }
serviceTerminalLength OBJECT-TYPE
SYNTAX INTEGER(-1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describe the terminal length.
0 means system doesn't limit the line numbers displayed.
-1 means system doesn't control terminal length."
::= { user 4 }
serviceCipherDetect OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
normal(2),
strong(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describe the cipher detect.
1 Disable security check
2 Cipher must contain digital and normal char
3 Cipher must contain digital, normal char and special char"
::= { user 5 }
--
-- Users table
--
usersTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of users."
::= { user 6 }
usersEntry OBJECT-TYPE
SYNTAX UsersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of users."
INDEX { usersLineType, usersLineIndex }
::= { usersTable 1 }
UsersEntry ::=
SEQUENCE {
usersLineType
Integer32,
usersLineIndex
Integer32,
usersname
OCTET STRING,
usersIdleTime
OCTET STRING,
usersLocation
OCTET STRING
}
usersLineType OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Users line Type. 0 means console,and 1 means vty."
::= { usersEntry 1 }
usersLineIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Users line index."
::= { usersEntry 2 }
usersname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Users name."
::= { usersEntry 3 }
usersIdleTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The idle time."
::= { usersEntry 4 }
usersLocation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user location."
::= { usersEntry 5 }
lineMaxVTY OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set max vty number and the default value is 8."
::= { user 7 }
-- Sub Module: SNMPEXT
snmpExtMibObject OBJECT IDENTIFIER ::= { snmpExt 1 }
snmpVersion OBJECT-TYPE
SYNTAX INTEGER
{
v1(1),
v2c(2),
v3(3),
all(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp agent's snmp version.v1(1),v2c(2),v3(3),all(4).
Default value is all(4)."
-- DEFVAL INDEX { all }
::= { snmpExtMibObject 1 }
snmpEngineID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (10..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Engine ID in hexadecimal format.If the value is not set use the default value.Range 10~64.
Default value 30383038303830383038."
-- DEFVAL INDEX { all }
::= { snmpExtMibObject 2 }
snmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp community configure."
::= { snmpExtMibObject 3 }
snmpCommunityEntry OBJECT-TYPE
SYNTAX SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpcommunityTable."
INDEX { snmpcommIndex }
::= { snmpCommunityTable 1 }
SnmpCommunityEntry ::=
SEQUENCE
{
snmpcommIndex
Integer32,
snmpcommName
OCTET STRING,
snmpcommType
Integer32,
snmpcommView
OCTET STRING,
snmpcommRowStatus
RowStatus
}
snmpcommIndex OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp community's index.Range 0~31."
::= { snmpCommunityEntry 1 }
snmpcommName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp community's name. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 256)."
::= { snmpCommunityEntry 2 }
snmpcommType OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp community type's index.read-only(1) read-write(2)."
::= { snmpCommunityEntry 3 }
snmpcommView OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp community's View. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 32)."
::= { snmpCommunityEntry 4 }
snmpcommRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpCommunityEntry 5 }
-- Snmp View Table
snmpViewTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp view configure."
::= { snmpExtMibObject 4 }
snmpViewEntry OBJECT-TYPE
SYNTAX SnmpViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpViewTable."
INDEX { snmpviewIndex}
::= { snmpViewTable 1 }
SnmpViewEntry ::=
SEQUENCE
{
snmpviewIndex
Integer32,
snmpviewName
OCTET STRING,
snmpviewType
Integer32,
snmpviewcldOID
OCTET STRING,
snmpviewMask
OCTET STRING,
snmpviewRowStatus
RowStatus
}
snmpviewIndex OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp View's index. Range is 0~31."
::= { snmpViewEntry 1 }
snmpviewName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp View's name. Range is 1~31."
::= { snmpViewEntry 2 }
snmpviewType OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"View type 1: include a subtree.View type 2: exclude a subtree."
::= { snmpViewEntry 3 }
snmpviewcldOID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..60))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subtree name. Format is '.A.B.C..' ."
::= { snmpViewEntry 4 }
snmpviewMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the subtree mask."
::= { snmpViewEntry 5 }
snmpviewRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpViewEntry 6 }
--
-- Snmp Usm-user Table
--
snmpUsmuserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpUsmuserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp Usm-user configure."
::= { snmpExtMibObject 5 }
snmpUsmuserEntry OBJECT-TYPE
SYNTAX SnmpUsmuserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpUsmuserTable."
INDEX { snmpUsmuserIndex }
::= { snmpUsmuserTable 1 }
SnmpUsmuserEntry ::=
SEQUENCE {
snmpUsmuserIndex
Integer32,
snmpUsmuserName
OCTET STRING,
snmpUsmuserRemote
OCTET STRING,
snmpUsmuserAuth
INTEGER,
snmpUsmuserAuthHid
INTEGER,
snmpUsmuserAuthPWD
OCTET STRING,
snmpUsmuserPrivacy
INTEGER,
snmpUsmuserPrivacyHid
INTEGER,
snmpUsmuserPrivacyPWD
OCTET STRING,
snmpUsmuserRowStatus
RowStatus
}
snmpUsmuserIndex OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp usm-user's index.Range 0~31."
::= { snmpUsmuserEntry 1 }
snmpUsmuserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp usm-user's name.Range 1~31."
::= { snmpUsmuserEntry 2 }
snmpUsmuserRemote OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (10..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp usm-user's Remote.Range 10~64."
::= { snmpUsmuserEntry 3 }
snmpUsmuserAuth OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
md5(2),
sha(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication parameters for the user. none(1),md5(2),sha(3)."
-- DEFVAL { md5 }
::= { snmpUsmuserEntry 4 }
snmpUsmuserAuthHid OBJECT-TYPE
SYNTAX INTEGER
{
unhidden(1),
hidden(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"pecifies a HIDDEN password will follow. unhidden(1),hidden(2)."
-- DEFVAL { md5 }
::= { snmpUsmuserEntry 5 }
snmpUsmuserAuthPWD OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify an authentication password.Password length depends on:
snmpUsmuserAuthHid(5) is unhidden(1), password Range is 8~64, otherwise 1~128."
::= { snmpUsmuserEntry 6 }
snmpUsmuserPrivacy OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
des(2),
aes(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Privacy parameters for the user. none(1),des(2),aes(3)."
-- DEFVAL { des }
::= { snmpUsmuserEntry 7 }
snmpUsmuserPrivacyHid OBJECT-TYPE
SYNTAX INTEGER
{
unhidden(1),
hidden(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies a HIDDEN password will follow. unhidden(1), hidden(2)."
-- DEFVAL { md5 }
::= { snmpUsmuserEntry 8 }
snmpUsmuserPrivacyPWD OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify a privacy password.Password length depends on:
snmpUsmuserPrivacyHid(8)is unhidden(1), password Range is 8~64, otherwise 1~128."
::= { snmpUsmuserEntry 9 }
snmpUsmuserRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpUsmuserEntry 10 }
--
-- Snmp server group Table
--
snmpGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp server group configure."
::= { snmpExtMibObject 6 }
snmpGrpEntry OBJECT-TYPE
SYNTAX SnmpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpGrpTable."
INDEX { snmpGrpIndex }
::= { snmpGrpTable 1 }
SnmpGrpEntry ::=
SEQUENCE
{
snmpGrpIndex
Integer32,
snmpGrpName
OCTET STRING,
snmpGrpUser
OCTET STRING,
snmpGrpSecMode
INTEGER,
snmpGrpRowStatus
RowStatus
}
snmpGrpIndex OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp group's index. Range is 0~31."
::= { snmpGrpEntry 1 }
snmpGrpName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the group. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 31)."
::= { snmpGrpEntry 2 }
snmpGrpUser OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define a user security name belongs to the group. Range is 1~31."
::= { snmpGrpEntry 3 }
snmpGrpSecMode OBJECT-TYPE
SYNTAX INTEGER
{
any(0),
v1(1),
v2c(2),
usm(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the group security model.
0 any
1 v1
2 v2c
3 usm(default)
Only support set 3(usm) now."
::= { snmpGrpEntry 4 }
snmpGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpGrpEntry 10 }
--
-- Snmp server access Table
--
snmpAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the access for a exact group."
::= { snmpExtMibObject 7 }
snmpAccessEntry OBJECT-TYPE
SYNTAX SnmpAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpAccessTable."
INDEX { snmpAccessIndex }
::= { snmpAccessTable 1 }
SnmpAccessEntry ::=
SEQUENCE {
snmpAccessIndex
Integer32,
snmpAccessName
OCTET STRING,
snmpAccessUsm
INTEGER,
snmpAccessRead
OCTET STRING,
snmpAccessWrite
OCTET STRING,
snmpAccessNotify
OCTET STRING,
snmpAccessContext
OCTET STRING,
snmpAccessContextType
INTEGER,
snmpAccessSecuMode
INTEGER,
snmpAccessRowStatus
RowStatus
}
snmpAccessIndex OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp access's index.Range 1~31."
::= { snmpAccessEntry 1 }
snmpAccessName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp Access's name.Range 1~31."
::= { snmpAccessEntry 2 }
snmpAccessUsm OBJECT-TYPE
SYNTAX INTEGER
{
noauth(1),
auth(2),
priv(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp usm security model
noauth(1): Set security level to no authentication
auth(2): Set security level to authentication but with no privacy
priv(3): Set security level to authentication with privacy"
::= { snmpAccessEntry 3 }
snmpAccessRead OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Restrict this access read area to a named MIB view."
::= { snmpAccessEntry 4 }
snmpAccessWrite OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Restrict this access write area to a named MIB view."
::= { snmpAccessEntry 5 }
snmpAccessNotify OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Restrict this access notify area to a named MIB view."
::= { snmpAccessEntry 6 }
snmpAccessContext OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the access's context name. Range is 0~31. "
::= { snmpAccessEntry 7 }
snmpAccessContextType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
exact(2),
prefix(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp usm security model
none(1): none
exact(2): Context match(default is exact) type specification: exact
prefix(3): Context match(default is exact) type specification: prefix."
::= { snmpAccessEntry 8 }
snmpAccessSecuMode OBJECT-TYPE
SYNTAX INTEGER
{
any(0),
v1(1),
v2c(2),
usm(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the access security model.
0 any
1 v1
2 v2c
3 usm(default)
Only support set 3(usm) now."
::= { snmpAccessEntry 9 }
snmpAccessRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpAccessEntry 10 }
--
-- Snmp server notify Table
--
snmpNotifyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpNotifyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Define a notify name which related to send SNMP notification."
::= { snmpExtMibObject 8 }
snmpNotifyEntry OBJECT-TYPE
SYNTAX SnmpNotifyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpNotifyTable."
INDEX { snmpNotifyIndex }
::= { snmpNotifyTable 1 }
SnmpNotifyEntry ::=
SEQUENCE
{
snmpNotifyIndex
Integer32,
snmpNotifyName
OCTET STRING,
snmpNotifyTag
OCTET STRING,
snmpNotifyOption
INTEGER,
snmpNotifyRowStatus
RowStatus
}
snmpNotifyIndex OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp notify's index. Range is 0~31."
::= { snmpNotifyEntry 1 }
snmpNotifyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the notify. Range is 1~31. "
::= { snmpNotifyEntry 2 }
snmpNotifyTag OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The name of the tag."
::= { snmpNotifyEntry 3 }
snmpNotifyOption OBJECT-TYPE
SYNTAX INTEGER
{
trap(1),
inform(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpNotifyOption
trap(1): Set notify type(default is trap) to TRAP
inform(2): Set notify type(default is trap) to INFORM."
::= { snmpNotifyEntry 4 }
snmpNotifyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpNotifyEntry 5 }
--
-- Snmp server target address Table
--
snmpTargetAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTargetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define a target address name which related to send SNMP notifications."
::= { snmpExtMibObject 9 }
snmpTargetAddrEntry OBJECT-TYPE
SYNTAX SnmpTargetAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpTargetAddrTable."
INDEX { snmpTargetAddrIndex }
::= { snmpTargetAddrTable 1 }
SnmpTargetAddrEntry ::=
SEQUENCE {
snmpTargetAddrIndex
Integer32,
snmpTargetAddrName
OCTET STRING,
snmpTargetAddrPara
OCTET STRING,
snmpTargetAddrMgmtIf
INTEGER,
snmpTargetAddrIpType
InetAddressType,
snmpTargetAddrIp
InetAddress,
snmpTargetAddrPort
Integer32,
snmpTargetAddrTimeout
Integer32,
snmpTargetAddrRetry
Integer32,
snmpTargetAddrTag
OCTET STRING,
snmpTargetAddrRowStatus
RowStatus
}
snmpTargetAddrIndex OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp target address's index. Range is 0~31."
::= { snmpTargetAddrEntry 1 }
snmpTargetAddrName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the target address. Range is 1~31. "
::= { snmpTargetAddrEntry 2 }
snmpTargetAddrPara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..60))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The name of the param."
::= { snmpTargetAddrEntry 3 }
snmpTargetAddrMgmtIf OBJECT-TYPE
SYNTAX INTEGER
{
noUse(1),
setMgmtIf(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"configuraion mgmt if.
1 noUse.
2 setMgmtIf."
::= { snmpTargetAddrEntry 4 }
snmpTargetAddrIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP addresses type,IPv4(1) or IPv6(2)."
::= { snmpTargetAddrEntry 5 }
snmpTargetAddrIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address."
::= { snmpTargetAddrEntry 6 }
snmpTargetAddrPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address udp port 0-65535.Default value is 162."
::= { snmpTargetAddrEntry 7 }
snmpTargetAddrTimeout OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout which detemine when to resend the notification 0-65535.
Default value is 1500."
::= { snmpTargetAddrEntry 8 }
snmpTargetAddrRetry OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout which detemine when to resend the notification 0-255.
Default value is 3."
::= { snmpTargetAddrEntry 9 }
snmpTargetAddrTag OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define taglist which related to notify table.Range 1~128."
::= { snmpTargetAddrEntry 10 }
snmpTargetAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpTargetAddrEntry 11 }
--
-- Snmp server target params Table
--
snmpTargetParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTargetParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the target params name which related to send SNMP notifications."
::= { snmpExtMibObject 10 }
snmpTargetParaEntry OBJECT-TYPE
SYNTAX SnmpTargetParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpTargetParaTable."
INDEX { snmpTargetParaIndex }
::= { snmpTargetParaTable 1 }
SnmpTargetParaEntry ::=
SEQUENCE {
snmpTargetParaIndex
Integer32,
snmpTargetParaName
OCTET STRING,
snmpTargetParaUser
OCTET STRING,
snmpTargetParaSecLvl
INTEGER,
snmpTargetParaRowStatus
RowStatus
}
snmpTargetParaIndex OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp target params's index. Range is 0~31."
::= { snmpTargetParaEntry 1 }
snmpTargetParaName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the target params. Range is 1~31. "
::= { snmpTargetParaEntry 2 }
snmpTargetParaUser OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..60))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the user."
::= { snmpTargetParaEntry 3 }
snmpTargetParaSecLvl OBJECT-TYPE
SYNTAX INTEGER
{
noauth(1),
auth(2),
priv(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp security model
noauth(1): Set security level to no authentication
auth(2): Set security level to authentication but with no privacy
priv(3): Set security level to authentication with privacy"
::= { snmpTargetParaEntry 4 }
snmpTargetParaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpTargetParaEntry 5 }
--
-- Snmp server trap target-address Table
--
snmpTrapAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define the trap remote receiver address."
::= { snmpExtMibObject 11 }
snmpTrapAddrEntry OBJECT-TYPE
SYNTAX SnmpTrapAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of snmpTrapAddrTable."
INDEX { snmpTrapIndex}
::= { snmpTrapAddrTable 1 }
SnmpTrapAddrEntry ::=
SEQUENCE {
snmpTrapIndex
Integer32,
snmpTrapType
INTEGER,
snmpTrapMgmtIf
INTEGER,
snmpTrapAddrIptype
InetAddressType,
snmpTrapAddrIpAddr
InetAddress,
snmpTrapAddrCommunity
OCTET STRING,
snmpTrapAddrVersion
OCTET STRING,
snmpTrapAddrPort
INTEGER,
snmpTrapAddrRowStatus
RowStatus
}
snmpTrapIndex OBJECT-TYPE
SYNTAX Integer32 (0..95)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp trap's index."
::= { snmpTrapAddrEntry 1 }
snmpTrapType OBJECT-TYPE
SYNTAX INTEGER(0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"configuraion type (trap:0 inform:1)."
::= { snmpTrapAddrEntry 2 }
snmpTrapMgmtIf OBJECT-TYPE
SYNTAX INTEGER
{
noUse(1),
setMgmtIf(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"configuraion mgmt if.
1 noUse.
2 setMgmtIf."
::= { snmpTrapAddrEntry 3 }
snmpTrapAddrIptype OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP addresses type : IPv4(1) or IPv6(2)."
::= { snmpTrapAddrEntry 4 }
snmpTrapAddrIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address."
::= { snmpTrapAddrEntry 5 }
snmpTrapAddrCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the community string.Range 1~255."
::= { snmpTrapAddrEntry 6 }
snmpTrapAddrVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..60))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the remote receiver."
::= { snmpTrapAddrEntry 7 }
snmpTrapAddrPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap value which area is 0 to 65535, The default is 162."
::= { snmpTrapAddrEntry 8 }
snmpTrapAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { snmpTrapAddrEntry 9 }
--
-- Snmp server trap enable Table
--
snmpEnableTable OBJECT IDENTIFIER ::= { snmpExtMibObject 12 }
snmpTrapColdstart OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable cold start trap. Enable(1), disable(2)."
DEFVAL { disable }
::= { snmpEnableTable 1 }
snmpTrapWarmstart OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable warm start trap. Enable(1), disable(2)."
DEFVAL { disable }
::= { snmpEnableTable 2 }
snmpTrapLinkdown OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable linkdown trap. Enable(1), disable(2)."
DEFVAL { disable }
::= { snmpEnableTable 3 }
snmpTrapLinkup OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable linkup trap. Enable(1), disable(2)."
DEFVAL { disable }
::= { snmpEnableTable 4 }
snmpTrapAll OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Enable all snmp trap. Enable(1), disable(2)."
DEFVAL { disable }
::= { snmpEnableTable 5 }
snmpTrapGeneralEvents OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Enable all general event traps. Enable(1), disable(2)."
DEFVAL { enable }
::= { snmpEnableTable 6 }
snmpLock OBJECT-TYPE
SYNTAX INTEGER
{
lock(1),
unlocked(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
Setting this to lock(1) will only succeed when the CLI is
NOT in configuration mode otherwise a badValue(3) in SNMPv1 and an inconsistentValue(12) in
SNMPv2 and SNMPv3 will be returned indicating that the CLI is in configuration mode.
If the CLI is NOT in configuration mode, the SNMP processing
will be performed and the value of this object will immediately return to unlocked(2) state as soon
as the SNMP processing takes place.
Retrieving this object through SNMP will always returned unlocked(2).
A typical usage will be to include this object as the first variable binding in all SET requests.
If the SET request will fail because the CLI is in configuration mode, the GET-RESPONSE
will contain an error with the first variable binding which indicates
that the CLI is in configuration mode."
::= { snmpExtMibObject 13 }
snmpAccessGroup OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The applied SNMP acl name."
::= { snmpExtMibObject 14 }
snmpSysContact OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify SNMP system contact parameter. Range 0~255.
0 is No command."
::= { snmpExtMibObject 15 }
snmpSysLocation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specity SNMP system location parameter. Range 0~255.
0 is No command."
::= { snmpExtMibObject 16 }
snmpInformReties OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times to retry an Inform request. <0~100>."
::= { snmpExtMibObject 18 }
snmpInformTimeout OBJECT-TYPE
SYNTAX INTEGER(1..1800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Snmp inform Timeout value, in seconds. <1~1800>."
::= { snmpExtMibObject 19 }
-- Sub Module: STM
stmMibObject OBJECT IDENTIFIER ::= { stm 1 }
--
--current profile
--
stmCurrentType OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
ipv4(1),
vlan(2),
ipv6(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(0) provide balance to all features.
ipv4(1) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(2) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
ipv6(3) provide maximum system utilization for IPv6 unicast routing.
hardware(50) provide default hardware configure."
DEFVAL { default }
::= { stmMibObject 1 }
--
--Next profile
--
stmNextType OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
ipv4(1),
vlan(2),
ipv6(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"STM type:
default(0) provide balance to all features.
ipv4(1) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(2) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
ipv6(3) provide maximum system utilization for IPv6 unicast routing.
hardware(50) provide default hardware configure."
DEFVAL { default }
::= { stmMibObject 2 }
--
-- Show STM profile Table
--
stmShowTable OBJECT-TYPE
SYNTAX SEQUENCE OF StmShowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show switch table Management profile."
::= { stmMibObject 3 }
stmShowEntry OBJECT-TYPE
SYNTAX StmShowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of stmShowTable by kilo."
INDEX { stmShowProfileType }
::= { stmShowTable 1 }
StmShowEntry ::=
SEQUENCE {
stmShowProfileType
INTEGER,
stmShowVlanNumber
Integer32,
stmShowVlanForwardingInstances
Integer32,
stmShowUcastMacAddresses
Integer32,
stmShowMcastMacAddresses
Integer32,
stmShowBlackholeMacAddresses
Integer32,
stmShowMaxAppliedVlanMapping
Integer32,
stmShowCfmLocalAndRemoteMeps
Integer32,
stmShowG8031Groups
Integer32,
stmShowG8032Rings
Integer32,
stmShowMacBasedVlanClassification
Integer32,
stmShowIpv4BasedVlanClassification
Integer32,
stmShowIpv6BasedVlanClassification
Integer32,
stmShowIpv4HostRoutes
Integer32,
stmShowIndirectIpv4Routes
Integer32,
stmShowIpv4EcmpGroups
Integer32,
stmShowIpv6HostRoutes
Integer32,
stmShowIndirectIpv6Routes
Integer32,
stmShowIpv6EcmpGroups
Integer32,
stmShowIpTunnelPeers
Integer32,
stmShowNatForIviPeers
Integer32,
stmShowIpv4McastRoutes
Integer32,
stmShowIpv4McastTotalMembers
Integer32,
stmShowIpv6McastRoutes
Integer32,
stmShowIpv6McastTotalMembers
Integer32,
stmShowIpv4SourceGuardEntries
Integer32,
stmShowIpv6SourceGuardEntries
Integer32,
stmShowIpv4AclAndQosFlowEntries
Integer32,
stmShowIpv6AclAndQosFlowEntries
Integer32,
stmShowFtn
Integer32,
stmShowIncomingLabelMap
Integer32,
stmShowVpws
Integer32,
stmShowLspPe
Integer32,
stmShowLspP
Integer32,
stmShowVplsPeer
Integer32,
stmShowVplsAc
Integer32,
stmShowVplsInstance
Integer32,
stmShowLspOam
Integer32,
stmShowOamForPseudoWrie
Integer32,
stmShowMplsApsTunnel
Integer32,
stmShowVlanMappingEntryAppliedPort
Integer32,
stmShowVlanMemberPorts
Integer32,
stmShowVlanMappingDefaultEntry
Integer32,
stmShowL2mcMemberPorts
Integer32,
stmShowL2mcv6Entries
Integer32,
stmShowL2mcv6MemberPorts
Integer32,
stmShowPBREntries
Integer32,
stmShowPBRv6Entries
Integer32,
stmShowVoiceVlan
Integer32,
stmShowG8032MemberPortsPerRing
Integer32,
stmShowMPLSLables
Integer32,
stmShowBFDSessions
Integer32
}
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }
stmShowVlanNumber OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN number"
DEFVAL { 0 }
::= { stmShowEntry 2 }
stmShowVlanForwardingInstances OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN forwarding instances"
DEFVAL { 0 }
::= { stmShowEntry 3 }
stmShowUcastMacAddresses OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ucast MAC addresses"
DEFVAL { 0 }
::= { stmShowEntry 4 }
stmShowMcastMacAddresses OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mcast MAC addresses"
DEFVAL { 0 }
::= { stmShowEntry 5 }
stmShowBlackholeMacAddresses OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Blackhole MAC addresses"
DEFVAL { 0 }
::= { stmShowEntry 6 }
stmShowMaxAppliedVlanMapping OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max applied VLAN mapping"
DEFVAL { 0 }
::= { stmShowEntry 7 }
stmShowCfmLocalAndRemoteMeps OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CFM local and remote MEPs"
DEFVAL { 0 }
::= { stmShowEntry 8 }
stmShowG8031Groups OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.8031 groups"
DEFVAL { 0 }
::= { stmShowEntry 9 }
stmShowG8032Rings OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.8032 rings"
DEFVAL { 0 }
::= { stmShowEntry 10 }
stmShowMacBasedVlanClassification OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC based VLAN classification"
DEFVAL { 0 }
::= { stmShowEntry 11 }
stmShowIpv4BasedVlanClassification OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 based VLAN classification"
DEFVAL { 0 }
::= { stmShowEntry 12 }
stmShowIpv6BasedVlanClassification OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 based VLAN classification"
DEFVAL { 0 }
::= { stmShowEntry 13 }
stmShowIpv4HostRoutes OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 host routes"
DEFVAL { 0 }
::= { stmShowEntry 14 }
stmShowIndirectIpv4Routes OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indirect IPv4 routes"
DEFVAL { 0 }
::= { stmShowEntry 15 }
stmShowIpv4EcmpGroups OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 ECMP groups"
DEFVAL { 0 }
::= { stmShowEntry 16 }
stmShowIpv6HostRoutes OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 host routes"
DEFVAL { 0 }
::= { stmShowEntry 17 }
stmShowIndirectIpv6Routes OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indirect IPv6 routes"
DEFVAL { 0 }
::= { stmShowEntry 18 }
stmShowIpv6EcmpGroups OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 ECMP groups"
DEFVAL { 0 }
::= { stmShowEntry 19 }
stmShowIpTunnelPeers OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Tunnel Peers"
DEFVAL { 0 }
::= { stmShowEntry 20 }
stmShowNatForIviPeers OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NAT For IVI Peers"
DEFVAL { 0 }
::= { stmShowEntry 21 }
stmShowIpv4McastRoutes OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 Mcast routes"
DEFVAL { 0 }
::= { stmShowEntry 22 }
stmShowIpv4McastTotalMembers OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 Mcast total members"
DEFVAL { 0 }
::= { stmShowEntry 23 }
stmShowIpv6McastRoutes OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 Mcast routes"
DEFVAL { 0 }
::= { stmShowEntry 24 }
stmShowIpv6McastTotalMembers OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 Mcast total members"
DEFVAL { 0 }
::= { stmShowEntry 25 }
stmShowIpv4SourceGuardEntries OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 source guard entries"
DEFVAL { 0 }
::= { stmShowEntry 26 }
stmShowIpv6SourceGuardEntries OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 source guard entries"
DEFVAL { 0 }
::= { stmShowEntry 27 }
stmShowIpv4AclAndQosFlowEntries OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv4 ACL/QOS flow entries"
DEFVAL { 0 }
::= { stmShowEntry 28 }
stmShowIpv6AclAndQosFlowEntries OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 ACL/QOS flow entries"
DEFVAL { 0 }
::= { stmShowEntry 29 }
stmShowFtn OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FTN"
DEFVAL { 0 }
::= { stmShowEntry 30 }
stmShowIncomingLabelMap OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Incoming Label Map"
DEFVAL { 0 }
::= { stmShowEntry 31 }
stmShowVpws OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vpws"
DEFVAL { 0 }
::= { stmShowEntry 32 }
stmShowLspPe OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LSP PE"
DEFVAL { 0 }
::= { stmShowEntry 33 }
stmShowLspP OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LSP P"
DEFVAL { 0 }
::= { stmShowEntry 34 }
stmShowVplsPeer OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS PEER"
DEFVAL { 0 }
::= { stmShowEntry 35 }
stmShowVplsAc OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS AC"
DEFVAL { 0 }
::= { stmShowEntry 36 }
stmShowVplsInstance OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS Instance"
DEFVAL { 0 }
::= { stmShowEntry 37 }
stmShowLspOam OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LSP OAM"
DEFVAL { 0 }
::= { stmShowEntry 38 }
stmShowOamForPseudoWrie OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OAM for Pseudo Wrie"
DEFVAL { 0 }
::= { stmShowEntry 39 }
stmShowMplsApsTunnel OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPLS APS Tunnel"
DEFVAL { 0 }
::= { stmShowEntry 40 }
stmShowVlanMappingEntryAppliedPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan Mapping Entry Applied Port"
DEFVAL { 0 }
::= { stmShowEntry 41 }
stmShowVlanMemberPorts OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan Member Ports"
DEFVAL { 0 }
::= { stmShowEntry 42 }
stmShowVlanMappingDefaultEntry OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan Mapping Default Entry"
DEFVAL { 0 }
::= { stmShowEntry 43 }
stmShowL2mcMemberPorts OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2mc Member Ports"
DEFVAL { 0 }
::= { stmShowEntry 44 }
stmShowL2mcv6Entries OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2mcv6 Entries"
DEFVAL { 0 }
::= { stmShowEntry 45 }
stmShowL2mcv6MemberPorts OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"L2mcv6 Member Ports"
DEFVAL { 0 }
::= { stmShowEntry 46 }
stmShowPBREntries OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PBR Entries"
DEFVAL { 0 }
::= { stmShowEntry 47 }
stmShowPBRv6Entries OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PBRv6 Entries"
DEFVAL { 0 }
::= { stmShowEntry 48 }
stmShowVoiceVlan OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voice Vlan"
DEFVAL { 0 }
::= { stmShowEntry 49 }
stmShowG8032MemberPortsPerRing OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8032 Member Ports Per Ring"
DEFVAL { 0 }
::= { stmShowEntry 50 }
stmShowMPLSLables OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPLS Lables"
DEFVAL { 0 }
::= { stmShowEntry 51 }
stmShowBFDSessions OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BFD Sessions"
DEFVAL { 0 }
::= { stmShowEntry 52 }
-- Sub Module: DNSCLIENT
dnsClientMibObject OBJECT IDENTIFIER ::= { dnsClient 1 }
--
-- add/remove a static host
--
dnsClientHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsClientHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table containing information of DNS host."
::= { dnsClientMibObject 1 }
dnsClientHostEntry OBJECT-TYPE
SYNTAX DnsClientHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information of DNS clients host."
INDEX { dnsClientHostIpHostIndex }
::= { dnsClientHostTable 1 }
DnsClientHostEntry ::=
SEQUENCE
{
dnsClientHostIpHostIndex
INTEGER,
dnsClientHostIpHostName
OCTET STRING ,
dnsClientHostIpAddress
IpAddress,
dnsClientHostRowStatus
RowStatus
}
dnsClientHostIpHostIndex OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DNS host IP's index."
::= { dnsClientHostEntry 1 }
dnsClientHostIpHostName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DNS host IP host name."
::= { dnsClientHostEntry 2 }
dnsClientHostIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DNS host IP addresses."
::= { dnsClientHostEntry 3 }
dnsClientHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { dnsClientHostEntry 4 }
--
-- add/remove a static domain
--
dnsClientDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsClientDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table containing information of DNS domain."
::= { dnsClientMibObject 2 }
dnsClientDomainEntry OBJECT-TYPE
SYNTAX DnsClientDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing information of DNS domain."
INDEX { dnsClientDomainIndex }
::= { dnsClientDomainTable 1 }
DnsClientDomainEntry ::=
SEQUENCE
{
dnsClientDomainIndex
INTEGER,
dnsClientDomainName
OCTET STRING,
dnsClientDomainRowStatus
RowStatus
}
dnsClientDomainIndex OBJECT-TYPE
SYNTAX INTEGER (1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DNS domain's index."
::= { dnsClientDomainEntry 1 }
dnsClientDomainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "DNS domain name."
-- DEFVAL { ipv4 }
::= { dnsClientDomainEntry 2 }
dnsClientDomainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { dnsClientDomainEntry 3 }
--
-- add/remove a static DNS server
--
dnsClientServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsClientServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information of DNS server."
::= { dnsClientMibObject 3 }
dnsClientServerEntry OBJECT-TYPE
SYNTAX DnsClientServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information of DNS clients server."
INDEX { dnsClientServerIpAddress }
::= { dnsClientServerTable 1 }
DnsClientServerEntry ::=
SEQUENCE {
-- dnsClientServerIpAddressType
-- InetAddressType,
dnsClientServerIpAddress
IpAddress,
dnsClientServerRowStatus
RowStatus
}
--dnsClientServerIpAddressType OBJECT-TYPE
-- SYNTAX InetAddressType
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "DNS host IP addresses type (IPv4 or IPv6)."
-- DEFVAL { ipv4 }
-- ::= { dnsClientServerEntry 1 }
dnsClientServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DNS host IP addresses."
::= { dnsClientServerEntry 1 }
dnsClientServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { dnsClientServerEntry 2 }
-- Sub Module: SSH
-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
sshServer OBJECT IDENTIFIER ::= { ssh 1 }
--
--sshServerEnable
--
sshServerEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH server status (enable(1) or disable(2)).
Default value is enable(1)."
DEFVAL{ 1 }
::= { sshServer 1 }
--
--sshServerVersion
--
sshServerVersion OBJECT-TYPE
SYNTAX INTEGER
{
v1(1),
v2(2),
all(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH server version.
v1(1), SSH version v1
v2(2), SSH version v2
all(3), SSH version v1 and v2.
Default value is v2(2)."
DEFVAL{ 2 }
::= { sshServer 2 }
--
--sshServerAuthTimer
--
sshServerAuthTimer OBJECT-TYPE
SYNTAX Integer32(1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH server login grace time.Range 1~120.
Default value is 120."
DEFVAL{ 120 }
::= { sshServer 3 }
--
--sshServerAuthRetries
--
sshServerAuthRetries OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH server max authentication retry times.Range 1~6.
Default value is 6."
DEFVAL{ 6 }
::= { sshServer 4 }
--
--sshServerAuthType
--
sshServerAuthType OBJECT-TYPE
SYNTAX INTEGER
{
password(1),
rsa(2),
publicKey(3),
passwordRsa(4),
passwordPublicKey(5),
rsaPublicKey(6),
all(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH server authentication type.
password(1): Enable password authentication
rsa(2): Enable SSHv1 RSA authentication
publicKey(3): Enable SSHv2 public key authentication
passwordRsa(4): Enable password and sshv1 Rsa authentication
passwordPublicKey(5): Enable password and sshv2 public-key authentication.
rsaPublicKey(6): Enable sshv1 rsa and sshv2 public-key authentication.
all(7): Enable all authentication type.
Default value is 5."
DEFVAL{ 5 }
::= { sshServer 5 }
--
--sshServerRekeyInterval
--
sshServerRekeyInterval OBJECT-TYPE
SYNTAX Integer32(1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rekey interval of ip ssh server.Range 1~1440.
Default value is 60."
DEFVAL{ 60 }
::= { sshServer 6 }
sshRsaKey OBJECT IDENTIFIER ::= { ssh 2 }
--
--sshImportRsaKeyTable
--
sshImportRsaKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshImportRsaKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp community configure."
::= { sshRsaKey 8 }
sshImportRsaKeyEntry OBJECT-TYPE
SYNTAX SshImportRsaKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of sshImportRsaKeyTable."
INDEX { sshImportRsaKeyIndex }
::= { sshImportRsaKeyTable 1 }
SshImportRsaKeyEntry ::=
SEQUENCE
{
sshImportRsaKeyIndex
INTEGER,
sshImportRsaKeyName
OCTET STRING,
sshImportRsaMgmtIf
INTEGER,
sshImportRsaKeyGenType
INTEGER,
sshImportRsaKeyBits
Integer32,
sshImportRsaKeyFileName
OCTET STRING,
sshImportRsaKeyType
INTEGER,
sshImportRsaKeyFormatType
INTEGER,
sshImportRsaKeyPasswd
OCTET STRING,
sshImportRsaKeyRowStatus
RowStatus
}
sshImportRsaKeyIndex OBJECT-TYPE
SYNTAX INTEGER (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SSH rsa key's index.Range 0~31."
::= { sshImportRsaKeyEntry 1 }
sshImportRsaKeyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH rsa key's name.Range 1~31"
::= { sshImportRsaKeyEntry 2 }
sshImportRsaMgmtIf OBJECT-TYPE
SYNTAX INTEGER
{
getValue(0),
noUse(1),
setMgmtIf(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"configuraion mgmt-if.getValue(0),no use(1),setMgmtIf(2)."
::= { sshImportRsaKeyEntry 3 }
sshImportRsaKeyGenType OBJECT-TYPE
SYNTAX INTEGER
{
autoGen(1),
localFile(2),
ftpFile(3),
tftpFile(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshImportRsaKeyGenType,Now only support auto-gen and local file.
if autoGen is selected the index is invalid, it will select the index itself.
1 autoGen.
2 localFile.
3 ftpFile.
4 tftpFile."
::= { sshImportRsaKeyEntry 4 }
sshImportRsaKeyBits OBJECT-TYPE
SYNTAX Integer32(768..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshImportRsaKeyBits.Range 768~4096."
::= { sshImportRsaKeyEntry 5 }
sshImportRsaKeyFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshImportRsaKeyFileName.Range 0~63."
::= { sshImportRsaKeyEntry 6 }
sshImportRsaKeyType OBJECT-TYPE
SYNTAX INTEGER
{
public(1),
private(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshImportRsaKeyGenType
public(1): Import public key
private(2): Import private key"
::= { sshImportRsaKeyEntry 7 }
sshImportRsaKeyFormatType OBJECT-TYPE
SYNTAX INTEGER
{
der(1),
derHex(2),
pem(3),
ssh1(4),
ssh2(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshImportRsaKeyGenType
der(1): DER format
derHex(2): DER HEX format
pem(3): PEM format
ssh1(4): SSHv1 format
ssh2(5): SSHv2 format"
::= { sshImportRsaKeyEntry 8 }
sshImportRsaKeyPasswd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH rsa key's Password.Range 6~256."
::= { sshImportRsaKeyEntry 9}
sshImportRsaKeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { sshImportRsaKeyEntry 10 }
--
--sshExportRsaKeyTable
--
sshExportRsaKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshExportRsaKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Snmp community configure."
::= { sshRsaKey 9 }
sshExportRsaKeyEntry OBJECT-TYPE
SYNTAX SshExportRsaKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of sshExportRsaKeyTable."
INDEX { sshExportRsaKeyIndex }
::= { sshExportRsaKeyTable 1 }
SshExportRsaKeyEntry ::=
SEQUENCE
{
sshExportRsaKeyIndex
INTEGER,
sshExportRsaKeyName
OCTET STRING,
sshExportRsaMgmtIf
INTEGER,
sshExportRsaKeyExType
INTEGER,
sshExportRsaKeyFileName
OCTET STRING,
sshExportRsaKeyType
INTEGER,
sshExportRsaKeyFormatType
INTEGER,
sshExportRsaKeyEncryptType
INTEGER,
sshExportRsaKeyPassword
OCTET STRING,
sshExportRsaKeyRowStatus
RowStatus
}
sshExportRsaKeyIndex OBJECT-TYPE
SYNTAX INTEGER (0)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SSH rsa key's index."
::= { sshExportRsaKeyEntry 1 }
sshExportRsaKeyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..60))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH rsa key's name.Range 1~60."
::= { sshExportRsaKeyEntry 2 }
sshExportRsaMgmtIf OBJECT-TYPE
SYNTAX INTEGER
{
getValue(0),
noUse(1),
setMgmtIf(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"configuraion mgmt-if.getValue(0),no use(1),setMgmtIf(2)."
::= { sshExportRsaKeyEntry 3 }
sshExportRsaKeyExType OBJECT-TYPE
SYNTAX INTEGER
{
localFile(1),
ftpFile(2),
tftpFile(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshExportRsaKeyGenType,Now only support local-file.
1 localFile.
2 ftpFile.
3 tftpFile."
::= { sshExportRsaKeyEntry 4 }
sshExportRsaKeyFileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshExportRsaKeyFileName.Range 0~256."
::= { sshExportRsaKeyEntry 5 }
sshExportRsaKeyType OBJECT-TYPE
SYNTAX INTEGER
{
public(1),
private(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshExportRsaKeyGenType
public(1): Export public key
private(2): Export private key"
::= { sshExportRsaKeyEntry 6 }
sshExportRsaKeyFormatType OBJECT-TYPE
SYNTAX INTEGER
{
der(1),
derHex(2),
pem(3),
ssh1(4),
ssh2(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshExportRsaKeyGenType
der(1): DER format
derHex(2): DER HEX format
pem(3): PEM format
ssh1(4): SSHv1 format
ssh2(5): SSHv2 format"
::= { sshExportRsaKeyEntry 7 }
sshExportRsaKeyEncryptType OBJECT-TYPE
SYNTAX INTEGER
{
des(1),
des3(2),
aes128(3),
aes192(4),
aes256(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sshExportRsaKeyEncryptType
des(1): Encrypt the private key with DES
des3(2): Encrypt the private key with Triple DES
aes128(3): Encrypt the private key with AES 128 bits
aes192(4): Encrypt the private key with AES 192 bits
aes256(5): Encrypt the private key with AES 256 bits"
::= { sshExportRsaKeyEntry 8 }
sshExportRsaKeyPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH rsa key's Password.Range 6~256."
::= { sshExportRsaKeyEntry 9 }
sshExportRsaKeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { sshExportRsaKeyEntry 10 }
sshHostKey OBJECT IDENTIFIER ::= { ssh 3 }
--
--sshHostKeyRsaTable
--
sshHostKeyRsaTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshHostKeyRsaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ssh server rsa host key."
::= { sshHostKey 7 }
sshHostKeyRsaEntry OBJECT-TYPE
SYNTAX SshHostKeyRsaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of sshHostKeyRsaTable."
INDEX { sshHostKeyRsaIndex }
::= { sshHostKeyRsaTable 1 }
SshHostKeyRsaEntry ::=
SEQUENCE {
sshHostKeyRsaIndex
INTEGER,
sshHostKeyRsaName
OCTET STRING,
sshHostKeyRsaRowStatus
RowStatus
}
sshHostKeyRsaIndex OBJECT-TYPE
SYNTAX INTEGER (0)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SSH rsa key's index."
::= { sshHostKeyRsaEntry 1 }
sshHostKeyRsaName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH rsa key's name. The rsa key should be exist first by sshRsaKey node. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 32)"
::= { sshHostKeyRsaEntry 2 }
sshHostKeyRsaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { sshHostKeyRsaEntry 3 }
-- Sub Module: DHCP
dhcpGlobal OBJECT IDENTIFIER ::= { dhcp 1 }
dhcpEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPStatus (enable or disable)."
DEFVAL { disable }
::= { dhcpGlobal 1 }
dhcpSnoop OBJECT IDENTIFIER ::= { dhcp 2 }
dhcpSnoopEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP SnoopingStatus (enable or disable)."
DEFVAL { disable }
::= { dhcpSnoop 1 }
dhcpSnoopVerMac OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Snooping verify mac-address (enable or disable)."
DEFVAL { enable }
::= { dhcpSnoop 2 }
dhcpSnoopOption82 OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Snooping option-82 data insertion (enable or disable)."
DEFVAL { disable }
::= { dhcpSnoop 3 }
dhcpSnoopOption82AllowUntrusted OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "DHCP Snooping allow untrusted ports to accept incoming DHCP packets with relay agent information."
DEFVAL { disable }
::= { dhcpSnoop 4 }
dhcpSnoopAutoSaveInterval OBJECT-TYPE
SYNTAX INTEGER (15..1200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify DHCP snooping database auto save parameter."
DEFVAL { 600 }
::= { dhcpSnoop 5 }
dhcpSnoopVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table is used to configure and monitor DHCP Snooping
STATUS of VLANs."
::= { dhcpSnoop 6 }
dhcpSnoopVlanEntry OBJECT-TYPE
SYNTAX DhcpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry information about dhcpSnoopVlanTable."
INDEX
{
dhcpSnoopVlanIndex
}
::= { dhcpSnoopVlanTable 1 }
DhcpSnoopVlanEntry ::=
SEQUENCE
{
dhcpSnoopVlanIndex
Integer32,
dhcpSnoopVlanEnable
TruthValue
}
dhcpSnoopVlanIndex OBJECT-TYPE
SYNTAX Integer32(0..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"current VLAN index."
::= { dhcpSnoopVlanEntry 1 }
dhcpSnoopVlanEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP SnoopingStatus ofcurrent VLAN."
-- DEFVAL INDEX { false }
::= { dhcpSnoopVlanEntry 2 }
dhcpSnoopBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information of DHCP clients listened by
DHCP snooping and it's enabled or disabled by setting
dhcpSnoopEnable node."
::= { dhcpSnoop 7 }
dhcpSnoopBindingEntry OBJECT-TYPE
SYNTAX DhcpSnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information of DHCP clients."
INDEX { dhcpSnoopClientVlan, dhcpSnoopClientMacAddress }
::= { dhcpSnoopBindingTable 1 }
DhcpSnoopBindingEntry ::=
SEQUENCE
{
dhcpSnoopClientVlan
Integer32,
dhcpSnoopClientMacAddress
MacAddress,
dhcpSnoopClientIpAddressType
InetAddressType,
dhcpSnoopClientIpAddress
InetAddress,
dhcpSnoopClientIfindex
Integer32,
dhcpSnoopClientExpiry
Integer32,
dhcpSnoopClientRowStatus
RowStatus
}
dhcpSnoopClientVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP clients' vlan id collected by DHCP snooping."
::= { dhcpSnoopBindingEntry 1 }
dhcpSnoopClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP clients' MAC addresses collected by DHCP snooping."
::= { dhcpSnoopBindingEntry 2 }
dhcpSnoopClientIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP clients' IP addresses type (IPv4 or IPv6). For DHCPv4 snooping, only support ipv4(1)."
-- DEFVAL { ipv4 }
::= { dhcpSnoopBindingEntry 3 }
dhcpSnoopClientIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP clients' IP addresses collected by DHCP snooping."
::= { dhcpSnoopBindingEntry 4 }
dhcpSnoopClientIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface collected by DHCP snooping."
::= { dhcpSnoopBindingEntry 5 }
dhcpSnoopClientExpiry OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"dhcp snooping Expiry"
::= { dhcpSnoopBindingEntry 6 }
dhcpSnoopClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { dhcpSnoopBindingEntry 7 }
--
--dhcpSnoopTrustTable
--
dhcpSnoopTrustTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table is used to configure and monitor port trustedStatus ."
::= { dhcpSnoop 8 }
dhcpSnoopTrustEntry OBJECT-TYPE
SYNTAX DhcpSnoopTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about trustedStatus of ports."
INDEX { ifIndex }
::= { dhcpSnoopTrustTable 1 }
DhcpSnoopTrustEntry ::=
SEQUENCE
{
dhcpSnoopTrustStatus INTEGER
}
dhcpSnoopTrustStatus OBJECT-TYPE
SYNTAX INTEGER
{
trusted(1),
untrusted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TrustedStatus ofcurrent port which supports both get and
set operation."
DEFVAL { untrusted }
::= { dhcpSnoopTrustEntry 1 }
--
--dhcpSnoopStatisticsGroup
--
dhcpSnoopStatisticsGroup OBJECT IDENTIFIER ::= { dhcpSnoop 9 }
dhcpSnoopDHCPPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DHCP packets received by DHCP Snooping."
::= { dhcpSnoopStatisticsGroup 1 }
dhcpSnoopBootpPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BOOTP packets received by DHCP Snooping."
::= { dhcpSnoopStatisticsGroup 2 }
dhcpSnoopFwdPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets forwarded by DHCP Snooping."
::= { dhcpSnoopStatisticsGroup 3 }
dhcpSnoopInvalidPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid packets received by DHCP Snooping."
::= { dhcpSnoopStatisticsGroup 4 }
dhcpSnoopMacVerifyFailedPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MAC address verify failed packets received by DHCP Snooping."
::= { dhcpSnoopStatisticsGroup 5 }
dhcpSnoopDroppedPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dropped packets received by DHCP Snooping."
::= { dhcpSnoopStatisticsGroup 6 }
dhcpSnoopStatisticsReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the packet statistics."
::= { dhcpSnoopStatisticsGroup 7 }
--
--dhcpSnoopClearAllBinding
--
dhcpSnoopClearAllBinding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the dhcp snoop binding."
::= { dhcpSnoop 10 }
dhcpSnoopRemoteIdFormatHostName OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The format type for the remote id ."
::= { dhcpSnoop 11 }
dhcpSnoopRemoteIdFormatString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to format remote id of option 82 for dhcpsnooping."
::= { dhcpSnoop 12 }
dhcpSnoopCircuitIdFormatTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopCircuitIdFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table is used to configure circuit id format on interface."
::= { dhcpSnoop 13 }
dhcpSnoopCircuitIdFormatEntry OBJECT-TYPE
SYNTAX DhcpSnoopCircuitIdFormatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of circuit id format on interface."
INDEX { ifIndex, dhcpSnoopCircuitIdFormatVlan }
::= { dhcpSnoopCircuitIdFormatTable 1 }
DhcpSnoopCircuitIdFormatEntry ::=
SEQUENCE
{
dhcpSnoopCircuitIdFormatVlan
Integer32,
dhcpSnoopCircuitIdFormatString
OCTET STRING,
dhcpSnoopCircuitIdFormatRowStatus
RowStatus
}
dhcpSnoopCircuitIdFormatVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan id for the Circuit Id format entry."
::= { dhcpSnoopCircuitIdFormatEntry 1 }
dhcpSnoopCircuitIdFormatString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node to configure circuit id of option 82 for dhcpsnooping."
::= { dhcpSnoopCircuitIdFormatEntry 2 }
dhcpSnoopCircuitIdFormatRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { dhcpSnoopCircuitIdFormatEntry 3 }
--
--
-- =====================Dhcp relay definition begin======================
--
--
dhcpRelay OBJECT IDENTIFIER ::= { dhcp 3 }
--
-- dhcpRGlobal
--
dhcpRGlobal OBJECT IDENTIFIER ::= { dhcpRelay 1 }
--
--dhcpREnable
--
dhcpREnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP relayStatus (enable or disable)."
DEFVAL { disable }
::= { dhcpRGlobal 1 }
dhcpROption82TrustAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trust all interfaces for dhcp relay information."
::= { dhcpRGlobal 2 }
--
--dhcpRIntf
--
dhcpRIntf OBJECT IDENTIFIER ::= { dhcpRelay 3 }
--
--dhcpRIfOption82TrustTable
--
dhcpRIfOption82TrustTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpRIfOption82TrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring the interface that trust dhcp relay information."
::= { dhcpRIntf 1 }
dhcpRIfOption82TrustEntry OBJECT-TYPE
SYNTAX DhcpRIfOption82TrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for configuring the interface that trust dhcp relay information."
INDEX { ifIndex }
::= { dhcpRIfOption82TrustTable 1 }
DhcpRIfOption82TrustEntry ::=
SEQUENCE {
dhcpRIfOption82Trust
TruthValue
}
dhcpRIfOption82Trust OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trust dhcp relay information."
::= { dhcpRIfOption82TrustEntry 1 }
--
--dhcpRIfSelectTable
--
dhcpRIfSelectTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpRIfSelectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring relay select server for interfaces."
::= { dhcpRIntf 2 }
dhcpRIfSelectEntry OBJECT-TYPE
SYNTAX DhcpRIfSelectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for configuring relay select server for interfaces."
INDEX { ifIndex }
::= { dhcpRIfSelectTable 1 }
DhcpRIfSelectEntry ::=
SEQUENCE {
dhcpRIfSelectserver
INTEGER
}
dhcpRIfSelectserver OBJECT-TYPE
SYNTAX INTEGER (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify DHCP server group number."
::= { dhcpRIfSelectEntry 1 }
--
-- dhcpRServer
--
dhcpRServer OBJECT IDENTIFIER ::= { dhcpRelay 2 }
dhcpROption82Switch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the value is enabled, DHCP relay supporting option 82 function would
be enabled."
DEFVAL { disable }
::= { dhcpRServer 1 }
dhcpROption82Check OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP relay option-82 data check.If the value is enabled,
DHCP relay will validate relay information in BOOTREPLY."
DEFVAL { enable }
::= { dhcpRServer 2 }
dhcpROption82HandleStrategy OBJECT-TYPE
SYNTAX INTEGER
{
replace(1),
keep(2),
drop(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The strategies of DHCP relay handling option 82.
'drop' indicates DHCP relay discarding the request
packet including option 82.
'keep' indicates DHCP relay accepting the request
packet without any change of the option 82.
'replace' indicates DHCP relay accepting the
request packet on condition that it generates a new
option 82 to replace the original one."
DEFVAL { keep }
::= { dhcpRServer 3 }
--
--dhcpRIpToGroupTable
--
dhcpRIpToGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPRIpToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring ip addresses for DHCP server groups."
::= { dhcpRServer 4 }
dhcpRIpToGroupEntry OBJECT-TYPE
SYNTAX DHCPRIpToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for configuring ip addresses for a DHCP server group. "
INDEX
{
dhcpRIpToGroupGroupId
}
::= { dhcpRIpToGroupTable 1 }
DHCPRIpToGroupEntry ::=
SEQUENCE
{
dhcpRIpToGroupGroupId
Integer32,
dhcpRIpToGroupServerIp
OCTET STRING,
dhcpRIpToGroupRowStatus
RowStatus
}
dhcpRIpToGroupGroupId OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Group identifier of DHCP server group."
::= { dhcpRIpToGroupEntry 1 }
dhcpRIpToGroupServerIp OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ip address of DHCP server.For example: 1.1.1.1,2.2.2.2 "
::= { dhcpRIpToGroupEntry 2 }
dhcpRIpToGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { dhcpRIpToGroupEntry 3 }
--
--dhcpRStatisticsGroup
--
dhcpRStatisticsGroup OBJECT IDENTIFIER ::= { dhcpRServer 5 }
dhcpRRxClientPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the packets received from DHCP
clients by DHCP relay.
"
::= { dhcpRStatisticsGroup 1 }
dhcpRRxServerPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the packets received from
DHCP Servers by DHCP relay.
"
::= { dhcpRStatisticsGroup 2 }
dhcpRRxClientErrPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the error packets received from
DHCP clients by DHCP relay.
"
::= { dhcpRStatisticsGroup 3 }
dhcpRRxServerErrPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the error packets received from
DHCP Servers by DHCP relay.
"
::= { dhcpRStatisticsGroup 4 }
dhcpRBogusAddrDropsPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Bogus GIADDR drops packets handled
by DHCP relay.
"
::= { dhcpRStatisticsGroup 5 }
dhcpRBadCircuitIDPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Bad circuit ID packets handled
by DHCP relay.
"
::= { dhcpRStatisticsGroup 6 }
dhcpRCorruptedAgentOpPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP corrupted agent options packets handled
by DHCP relay.
"
::= { dhcpRStatisticsGroup 7 }
dhcpRMissAgentOpPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Missing agent options packets handled
by DHCP relay.
"
::= { dhcpRStatisticsGroup 8 }
dhcpRMissCircuitIDPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the DHCP Missing circuit IDs packets handled
by DHCP relay.
"
::= { dhcpRStatisticsGroup 9 }
dhcpRStatisticsReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the packet
statistics.
"
::= { dhcpRStatisticsGroup 10 }
-- dhcpv6
dhcpv6Global OBJECT IDENTIFIER ::= { dhcp 6 }
dhcpv6Enable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 Status (enable or disable)."
DEFVAL { disable }
::= { dhcpv6Global 1 }
dhcpv6Snoop OBJECT IDENTIFIER ::= { dhcp 7 }
dhcpv6SnoopGlobal OBJECT IDENTIFIER ::= { dhcpv6Snoop 1 }
dhcpv6SnoopEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 Snooping Status (enable or disable)."
DEFVAL { disable }
::= { dhcpv6SnoopGlobal 1 }
dhcpv6SnoopAutoSaveInterval OBJECT-TYPE
SYNTAX INTEGER (15..1200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify DHCPv6 snooping database auto save parameter."
DEFVAL { 600 }
::= { dhcpv6SnoopGlobal 2 }
dhcpv6SnoopClearAllBinding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the dhcpv6 snoop binding."
DEFVAL { false }
::= { dhcpv6SnoopGlobal 3 }
dhcpv6SnoopVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6SnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table is used to configure and monitor DHCPv6 Snooping
status of VLANs."
::= { dhcpv6Snoop 2 }
dhcpv6SnoopVlanEntry OBJECT-TYPE
SYNTAX Dhcpv6SnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry information about dhcpv6SnoopVlanTable."
INDEX
{
dhcpv6SnoopVlanIndex
}
::= { dhcpv6SnoopVlanTable 1 }
Dhcpv6SnoopVlanEntry ::=
SEQUENCE
{
dhcpv6SnoopVlanIndex
Integer32,
dhcpv6SnoopVlanEnable
TruthValue
}
dhcpv6SnoopVlanIndex OBJECT-TYPE
SYNTAX Integer32(0..4096)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"current VLAN index."
::= { dhcpv6SnoopVlanEntry 1 }
dhcpv6SnoopVlanEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 Snooping Status of current VLAN."
DEFVAL { false }
::= { dhcpv6SnoopVlanEntry 2 }
dhcpv6SnoopBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6SnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information of DHCPv6 clients listened by
DHCPv6 snooping and it's enabled or disabled by setting
dhcpv6SnoopEnable node."
::= { dhcpv6Snoop 3 }
dhcpv6SnoopBindingEntry OBJECT-TYPE
SYNTAX Dhcpv6SnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information of DHCPv6 clients."
INDEX { dhcpv6SnoopClientVlan, dhcpv6SnoopClientMacAddress }
::= { dhcpv6SnoopBindingTable 1 }
Dhcpv6SnoopBindingEntry ::=
SEQUENCE
{
dhcpv6SnoopClientVlan
Integer32,
dhcpv6SnoopClientMacAddress
MacAddress,
dhcpv6SnoopClientIpAddressType
InetAddressType,
dhcpv6SnoopClientIpAddress
InetAddress,
dhcpv6SnoopClientIfindex
Integer32,
dhcpv6SnoopClientExpiry
Integer32,
dhcpv6SnoopClientRowStatus
RowStatus
}
dhcpv6SnoopClientVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCPv6 clients' vlan id collected by DHCPv6 snooping."
::= { dhcpv6SnoopBindingEntry 1 }
dhcpv6SnoopClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCPv6 clients' MAC addresses collected by DHCPv6 snooping."
::= { dhcpv6SnoopBindingEntry 2 }
dhcpv6SnoopClientIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 clients' IP addresses type (IPv4 or IPv6). For DHCPv6 snooping, only support ipv6(2)."
-- DEFVAL { ipv6 }
::= { dhcpv6SnoopBindingEntry 3 }
dhcpv6SnoopClientIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 clients' IP addresses collected by DHCPv6 snooping."
::= { dhcpv6SnoopBindingEntry 4 }
dhcpv6SnoopClientIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface collected by DHCPv6 snooping."
::= { dhcpv6SnoopBindingEntry 5 }
dhcpv6SnoopClientExpiry OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"dhcpv6 snooping Expiry"
::= { dhcpv6SnoopBindingEntry 6 }
dhcpv6SnoopClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo
and Destroy and Active."
::= { dhcpv6SnoopBindingEntry 7 }
--
--dhcpv6SnoopTrustTable
--
dhcpv6SnoopTrustTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6SnoopTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table is used to configure and monitor port trustedStatus ."
::= { dhcpv6Snoop 4 }
dhcpv6SnoopTrustEntry OBJECT-TYPE
SYNTAX Dhcpv6SnoopTrustEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information about trusted status of ports."
INDEX { ifIndex }
::= { dhcpv6SnoopTrustTable 1 }
Dhcpv6SnoopTrustEntry ::=
SEQUENCE
{
dhcpv6SnoopTrust INTEGER
}
dhcpv6SnoopTrust OBJECT-TYPE
SYNTAX INTEGER
{
trusted(1),
untrusted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trusted status of current port which enable dhcpv6 snooping."
DEFVAL { untrusted }
::= { dhcpv6SnoopTrustEntry 1 }
--
--dhcpv6SnoopStatisticsGroup
--
dhcpv6SnoopStatisticsGroup OBJECT IDENTIFIER ::= { dhcpv6Snoop 5 }
dhcpv6SnoopDHCPv6PktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DHCPv6 packets received by DHCPv6 Snooping."
::= { dhcpv6SnoopStatisticsGroup 1 }
dhcpv6SnoopFwdPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets forwarded by DHCPv6 Snooping."
::= { dhcpv6SnoopStatisticsGroup 2 }
dhcpv6SnoopInvalidPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid packets received by DHCPv6 Snooping."
::= { dhcpv6SnoopStatisticsGroup 3 }
dhcpv6SnoopDroppedPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dropped packets received by DHCPv6 Snooping."
::= { dhcpv6SnoopStatisticsGroup 4 }
dhcpv6SnoopStatisticsReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the packet statistics."
::= { dhcpv6SnoopStatisticsGroup 64 }
--
-- =====================Dhcpv6 relay definition begin======================
--
dhcpv6Relay OBJECT IDENTIFIER ::= { dhcp 8 }
--
-- dhcpv6RGlobal
--
dhcpv6RGlobal OBJECT IDENTIFIER ::= { dhcpv6Relay 1 }
--
--dhcpv6REnable
--
dhcpv6REnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 relay status (enable or disable)."
DEFVAL { disable }
::= { dhcpv6RGlobal 1 }
--
-- dhcpv6RServer
--
dhcpv6RServer OBJECT IDENTIFIER ::= { dhcpv6Relay 2 }
--
--dhcpv6RIpToGroupTable
--
dhcpv6RIpToGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPv6RIpToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring ip addresses for DHCPv6 server groups."
::= { dhcpv6RServer 1 }
dhcpv6RIpToGroupEntry OBJECT-TYPE
SYNTAX DHCPv6RIpToGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for configuring ip addresses for a DHCPv6 server group. "
INDEX
{
dhcpv6RIpToGroupGroupId
}
::= { dhcpv6RIpToGroupTable 1 }
DHCPv6RIpToGroupEntry ::=
SEQUENCE
{
dhcpv6RIpToGroupGroupId
Integer32,
dhcpv6RIpToGroupServerIpIf
OCTET STRING,
dhcpv6RIpToGroupRowStatus
RowStatus
}
dhcpv6RIpToGroupGroupId OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Group identifier of DHCPv6 server group."
::= { dhcpv6RIpToGroupEntry 1 }
dhcpv6RIpToGroupServerIpIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ipv6 address of DHCPv6 server.For example: 2001:1::1"
::= { dhcpv6RIpToGroupEntry 2 }
dhcpv6RIpToGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { dhcpv6RIpToGroupEntry 3 }
--
--dhcpv6RIfSelectTable
--
dhcpv6RIfSelectTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6RIfSelectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring relay select server for interfaces."
::= { dhcpv6RServer 2 }
dhcpv6RIfSelectEntry OBJECT-TYPE
SYNTAX Dhcpv6RIfSelectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for configuring relay select server for interfaces."
INDEX { ifIndex }
::= { dhcpv6RIfSelectTable 1 }
Dhcpv6RIfSelectEntry ::=
SEQUENCE {
dhcpv6RIfSelectserver
INTEGER
}
dhcpv6RIfSelectserver OBJECT-TYPE
SYNTAX INTEGER (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify DHCPv6 server group number."
::= { dhcpv6RIfSelectEntry 1 }
--
dhcpv6ROption OBJECT IDENTIFIER ::= { dhcpv6Relay 3 }
--
dhcpv6RRemoteid OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 remote-id option."
DEFVAL { disable }
::= { dhcpv6ROption 1 }
dhcpv6RRemoteidFormatDuid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use DUID in DHCPv6 remote-id format."
DEFVAL { true }
::= { dhcpv6ROption 2 }
dhcpv6RRemoteidFormatIfname OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use name of interface in DHCPv6 remote-id format."
DEFVAL { true }
::= { dhcpv6ROption 3 }
dhcpv6RRemoteidFormatVlan OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use vlan in DHCPv6 remote-id format."
DEFVAL { false }
::= { dhcpv6ROption 4 }
dhcpv6RPDrouteEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCPv6 prefix-delegation route learning (enable or disable)."
DEFVAL { disable }
::= { dhcpv6ROption 5 }
dhcpv6RPDrouteDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the default distance for prefix-delegation route learned by DHCPv6 relay."
DEFVAL { 254 }
::= { dhcpv6ROption 6 }
dhcpv6RPDrouteAllClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the prefix-delegation route."
::= { dhcpv6ROption 7 }
dhcpv6RPDrouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6RPDrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An table for prefix-delegation route."
::= { dhcpv6ROption 8 }
dhcpv6RPDrouteEntry OBJECT-TYPE
SYNTAX Dhcpv6RPDrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for prefix-delegation route."
INDEX { dhcpv6RPDrouteId }
::= { dhcpv6RPDrouteTable 1 }
Dhcpv6RPDrouteEntry ::=
SEQUENCE
{
dhcpv6RPDrouteId
Unsigned32,
dhcpv6RPDrouteIf
Integer32,
dhcpv6RPDrouteClientIp
OCTET STRING,
dhcpv6RPDroutePrefix
OCTET STRING,
dhcpv6RPDrouteExpiry
Unsigned32,
dhcpv6RPDrouteRowStatus
RowStatus
}
dhcpv6RPDrouteId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of DHCPv6 prefix-delegation route item."
::= { dhcpv6RPDrouteEntry 1 }
dhcpv6RPDrouteIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of interface to DHCPv6 client."
::= { dhcpv6RPDrouteEntry 2 }
dhcpv6RPDrouteClientIp OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCPv6 PD clients' Ipv6 address."
::= { dhcpv6RPDrouteEntry 3 }
dhcpv6RPDroutePrefix OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..42))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCPv6 prefix-delegation prefix."
::= { dhcpv6RPDrouteEntry 4 }
dhcpv6RPDrouteExpiry OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lease of DHCPv6 prefix-delegation prefix."
::= { dhcpv6RPDrouteEntry 5 }
dhcpv6RPDrouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { dhcpv6RPDrouteEntry 6 }
--
dhcpv6RStatisticsGroup OBJECT IDENTIFIER ::= { dhcpv6Relay 4 }
--
dhcpv6RRxClientPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the packets received from DHCPv6
clients by DHCPv6 relay.
"
::= { dhcpv6RStatisticsGroup 1 }
dhcpv6RRxServerPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the packets received from
DHCPv6 Servers by DHCPv6 relay.
"
::= { dhcpv6RStatisticsGroup 2 }
dhcpv6RRxClientErrPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the error packets received from
DHCPv6 clients by DHCPv6 relay.
"
::= { dhcpv6RStatisticsGroup 3 }
dhcpv6RRxServerErrPktNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the error packets received from
DHCPv6 Servers by DHCPv6 relay.
"
::= { dhcpv6RStatisticsGroup 4 }
dhcpv6RStatisticsReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true,it will clear all of the packet
statistics.
"
::= { dhcpv6RStatisticsGroup 64 }
-- Sub Module: LSWDEVMMIB
-- ==================================================================
lswdevMMibObject OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Description."
::= { lswdevMMib 1 }
devMFanMibObject OBJECT IDENTIFIER ::= { lswdevMMibObject 1 }
devMFanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DevMFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Fan status description table"
::= { devMFanMibObject 1 }
devMFanStatusEntry OBJECT-TYPE
SYNTAX DevMFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fan status description table entry"
INDEX {devMFanPosition, devMFanModuleId, devMFanIndex }
::= { devMFanStatusTable 1 }
DevMFanStatusEntry ::=
SEQUENCE
{
devMFanPosition
INTEGER,
devMFanModuleId
INTEGER,
devMFanIndex
INTEGER,
devMFanStatus
INTEGER,
devMFanSpeed
OCTET STRING,
devMFanLowSpeed
INTEGER,
devMFanHighSpeed
INTEGER,
devMFanSpeedAdjust
INTEGER,
devMFanSetSpeed
INTEGER
}
devMFanPosition OBJECT-TYPE
SYNTAX INTEGER
{
default (1),
left (2),
right (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan position type: 1-default, 2-left, 3-right. "
::= { devMFanStatusEntry 1 }
devMFanModuleId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan Module id."
::= { devMFanStatusEntry 2 }
devMFanIndex OBJECT-TYPE
SYNTAX INTEGER (1..18)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan number"
::= { devMFanStatusEntry 3 }
devMFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
active (1),
deactive (2),
notInstall (3),
unsupport (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FanStatus : active (1), deactive (2) not installed (3) and unsupported (4)."
::= { devMFanStatusEntry 4 }
devMFanSpeed OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fan speed(RPM)"
::= { devMFanStatusEntry 5 }
devMFanLowSpeed OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Fan speed low threshold(RPM)."
::= { devMFanStatusEntry 6 }
devMFanHighSpeed OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Fan speed high threshold(RPM)."
::= { devMFanStatusEntry 7 }
devMFanSpeedAdjust OBJECT-TYPE
SYNTAX INTEGER
{
unsupport (0),
support (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether fan support speed adjust, 0 mean unsupport, 1 mean support."
::= { devMFanStatusEntry 8 }
devMFanSetSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Config speed value."
::= { devMFanStatusEntry 9 }
--devMFanTemperatureTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF DevMFanTemperatureEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Fan temperature description table"
-- ::= { devMFanMibObject 2 }
--
--
--devMFanTemperatureEntry OBJECT-TYPE
-- SYNTAX DevMFanTemperatureEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Fan temperature description entry"
-- INDEX { devMFanTemperatureLocation, devMFanTemperatureIndex}
-- ::= { devMFanTemperatureTable 1 }
--
--
--DevMFanTemperatureEntry ::=
-- SEQUENCE
-- {
-- devMFanTemperatureLocation INTEGER,
-- devMFanTemperatureIndex Integer32,
-- devMFanTemperatureValue Integer32,
-- devMFanTemperatureLow Integer32,
-- devMFanTemperatureHigh INTEGER
-- }
--
--
--devMFanTemperatureLocation OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- default(1),
-- left(2),
-- right(3)
-- }
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Fan sensor position type: 1-default, 2-left, 3-right"
-- ::= { devMFanTemperatureEntry 1 }
--
--devMFanTemperatureIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..16)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Fan sensor number"
-- ::= { devMFanTemperatureEntry 2 }
--
--devMFanTemperatureValue OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Fan sensor temperature"
-- ::= { devMFanTemperatureEntry 3 }
--
--devMFanTemperatureLow OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Fan sensor temperature low"
-- ::= { devMFanTemperatureEntry 4 }
--
--devMFanTemperatureHigh OBJECT-TYPE
-- SYNTAX INTEGER (50..90)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Fan sensor temperature high"
-- ::= { devMFanTemperatureEntry 5 }
devMPowerStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DevMPowerStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Power status description table."
::= { lswdevMMibObject 2 }
devMPowerStatusEntry OBJECT-TYPE
SYNTAX DevMPowerStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Power status description table entry."
INDEX { devMPowerIndex }
::= { devMPowerStatusTable 1 }
DevMPowerStatusEntry ::=
SEQUENCE
{
devMPowerIndex
INTEGER,
devMPowerStatus
INTEGER,
devMPowerWorkStatus
INTEGER,
devMPowerType
INTEGER,
devMPowerFanStatus
INTEGER,
devMPowerControlStatus
INTEGER,
devMPowerAlertStatus
INTEGER
}
devMPowerIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Power number."
::= { devMPowerStatusEntry 1 }
devMPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
present (1),
absent (2),
unsupport (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Power whole device status: present (1), absent (2), unsupport (3)."
::= { devMPowerStatusEntry 2 }
devMPowerWorkStatus OBJECT-TYPE
SYNTAX INTEGER
{
active (1),
deactive (2),
notInstall (3),
unsupport (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power status: active (1), deactive (2) not installed (3) and unsupported (4). "
::= { devMPowerStatusEntry 3 }
devMPowerType OBJECT-TYPE
SYNTAX INTEGER
{
ac (1),
dc (2),
unknow (3),
notInstall (4),
unsupport (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Power status: AC (1), DC (2), UNKNOW (3), notInstall (4) and unsupported (5)."
::= { devMPowerStatusEntry 4 }
devMPowerFanStatus OBJECT-TYPE
SYNTAX INTEGER
{
active (1),
deactive (2),
notInstall (3),
unsupport (4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION " Power status: work (1), failed (2) not installed (3) and unsupported (4). "
::= { devMPowerStatusEntry 5 }
devMPowerControlStatus OBJECT-TYPE
SYNTAX INTEGER
{
on (1),
down (2),
uninstall (3),
unsupported (4)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION " Power status: on (1), down (2), uninstall(3), unsupported(4)."
::= { devMPowerStatusEntry 6 }
devMPowerAlertStatus OBJECT-TYPE
SYNTAX INTEGER
{
noAlert (1),
alert (2),
unsupported (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Power status: noAlert (1), alert (2), unsupported(3)."
::= { devMPowerStatusEntry 7 }
devMSlotEnvironmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF DevMSlotEnvironmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " Environment description table "
::= { lswdevMMibObject 3 }
devMSlotEnvironmentEntry OBJECT-TYPE
SYNTAX DevMSlotEnvironmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " Environment DESCRIPTION table entry."
INDEX { devMSlotEnvironmentType, devMSlotEnvironmentSlot, devMSlotEnvironmentIndex}
::= { devMSlotEnvironmentTable 1 }
DevMSlotEnvironmentEntry ::=
SEQUENCE
{
devMSlotEnvironmentType INTEGER,
devMSlotEnvironmentSlot Integer32,
devMSlotEnvironmentIndex Integer32,
devMSlotEnvironmentValue Integer32,
devMSlotEnvironmentCriticalLimit INTEGER,
devMSlotEnvironmentUpperLimit INTEGER,
devMSlotEnvironmentLowerLimit INTEGER
}
devMSlotEnvironmentType OBJECT-TYPE
SYNTAX INTEGER
{
temperature(1),
humidity(2),
fog(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Environment type. 1-temperature, 2-humidity, 3-fog.
only support temperature(1) now, Not support humidity(2) and flog(3)."
::= { devMSlotEnvironmentEntry 1 }
devMSlotEnvironmentSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Environment slot number."
::= { devMSlotEnvironmentEntry 2 }
devMSlotEnvironmentIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Environment index.
For temperature,max temperature sensor num is 6."
::= { devMSlotEnvironmentEntry 3 }
devMSlotEnvironmentValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION " Environment value."
::= { devMSlotEnvironmentEntry 4 }
devMSlotEnvironmentCriticalLimit OBJECT-TYPE
SYNTAX INTEGER (55..90)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Environment critical temperature threshold, unit is Celsius."
::= { devMSlotEnvironmentEntry 5 }
devMSlotEnvironmentUpperLimit OBJECT-TYPE
SYNTAX INTEGER (50..85)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Environment high temperature threshold, unit is Celsius."
::= { devMSlotEnvironmentEntry 6 }
devMSlotEnvironmentLowerLimit OBJECT-TYPE
SYNTAX INTEGER (-15..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Environment Low temperature threshold, unit is Celsius."
::= { devMSlotEnvironmentEntry 7 }
--linkUpDownTrapEnable OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enableBoth(1) ,
-- disableBoth(2) ,
-- enableLinkUpTrapOnly(3) ,
-- enableLinkDownTrapOnly(4)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable/Disable linkUp/linkDown traps of the device, determining whether
-- to enable linkUp/linkDown traps with that of the interface.
-- When the value is enableBoth(1), the linkUp/linkDown traps are both
-- enabled.
-- When the value is disableBoth(2), the linkUp/linkDown traps are both
-- disabled.
-- When the value is enableLinkUpTrapOnly(3), the linkUp traps is enabled
-- and the linkDown traps is disabled.
-- When the value is enableLinkDownTrapOnly(4), the linkUp traps is
-- disabled and the linkDown traps is enabled."
-- ::= { lswdevMMibObject 9 }
--
--dot1qTpFdbLearnStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enabled(1),
-- disabled(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION " Enable/Disable the address learning."
-- ::= { lswdevMMibObject 10 }
--
--
--
--cfmWriteFlash OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- write(1)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION " Write thecurrent effective configuration into the Flash memory.
-- This object does not support read operation."
-- ::= { lswdevMMibObject 11 }
--
--
--cfmEraseFlash OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- erase(1)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION " Delete the configuration from the Flash memory.
-- This object does not support read operation."
-- ::= { lswdevMMibObject 12 }
--
--
-- ==================================================================
--
-- Frame information table
--
-- ==================================================================
--lswFrameTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF LswFrameEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Frame information table."
-- ::= {lswdevMMibObject 4}
--
--lswFrameEntry OBJECT-TYPE
-- SYNTAX LswFrameEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Frame description table entry."
-- INDEX { lswFrameIndex }
-- ::= {lswFrameTable 1}
--
--LswFrameEntry ::=
-- SEQUENCE
-- {
-- lswFrameIndex Integer32,
-- lswFrameType Integer32,
-- lswFrameDesc OCTET STRING ,
-- lswSlotNumber Integer32,
-- lswFrameAdminStatus INTEGER,
-- lswFrameOperStatus INTEGER
-- }
--
--lswFrameIndex OBJECT-TYPE
-- SYNTAX Integer32 (0..65535)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The unique index of frame."
-- ::= {lswFrameEntry 1}
--
--lswFrameType OBJECT-TYPE
-- SYNTAX Integer32 (0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Frame type."
-- ::= {lswFrameEntry 2}
--
--lswFrameDesc OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE(0..64))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Frame description."
-- ::= {lswFrameEntry 3}
--
--lswSlotNumber OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Number of slots of thecurrent frame."
-- ::= {lswFrameEntry 4}
--
--lswFrameAdminStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- normal (1),
-- fault (2),
-- other (3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The status of frame."
-- ::= {lswFrameEntry 5}
--
--lswFrameOperStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- disable (1),
-- enable (2),
-- haReload (3),
-- haSwitchover (4),
-- syncStartupConfig (5)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The operationStatus of frame."
-- ::= {lswFrameEntry 6}
-- ==================================================================
--
-- slot information table
--
-- ==================================================================
lswSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF LswSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot description table."
::= {lswdevMMibObject 5}
lswSlotEntry OBJECT-TYPE
SYNTAX LswSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot description table entry."
INDEX { lswSlotFrameIndex, lswSlotIndex }
::= {lswSlotTable 1}
LswSlotEntry ::=
SEQUENCE
{
lswSlotFrameIndex Integer32,
lswSlotIndex Integer32,
lswSlotConfigType OCTET STRING,
lswSlotCurrentType OCTET STRING,
lswSlotStatus OCTET STRING,
lswSlotSupStatus OCTET STRING,
lswSlotPortNumber Integer32,
lswSlotHwVer OCTET STRING,
lswSlotRom OCTET STRING,
lswSlotSerialNo OCTET STRING
}
lswSlotFrameIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame index. Now we only support 1."
::= {lswSlotEntry 1}
lswSlotIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot index."
::= {lswSlotEntry 2}
lswSlotConfigType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configed Slot type. Include SUP-1, LC-24S, LC-24T, LC-2X8S, LC-2X8ST."
::= {lswSlotEntry 3}
lswSlotCurrentType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Slot type. Include SUP-1, LC-24S, LC-24T, LC-2X8S, LC-2X8ST."
::= {lswSlotEntry 4}
lswSlotStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Slot status. Include absent, creating, initing, syncing, fail, ready, uninit, conflict."
::= {lswSlotEntry 5}
lswSlotSupStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The supervisor card status. This node is just for supervisor card. Include Active and Standby."
::= {lswSlotEntry 6}
lswSlotPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of the ports on the card in this slot. On supervisor the number is 0."
::= {lswSlotEntry 7}
lswSlotHwVer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware version of the card in this slot. If the line card is absent, none info will be printed."
::= {lswSlotEntry 8}
lswSlotRom OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bootrom version of the card in this slot. If the line card is absent, none info will be printed."
::= {lswSlotEntry 9}
lswSlotSerialNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the card in this Slot. If the line card is absent, none info will be printed."
::= {lswSlotEntry 10}
-- ==================================================================
--
-- sub slot information table
--
-- ==================================================================
--lswSubslotTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF LswSubslotEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Subslot DESCRIPTION table."
-- ::= {lswdevMMibObject 6}
--
--lswSubslotEntry OBJECT-TYPE
-- SYNTAX LswSubslotEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Subslot DESCRIPTION table entry."
-- INDEX
-- {
-- lswFrameIndex,
-- lswSlotIndex,
-- lswSubslotIndex
-- }
-- ::= {lswSubslotTable 1}
--
--LswSubslotEntry ::=
-- SEQUENCE
-- {
-- lswSubslotFrameIndex
-- Integer32,
-- lswSubslotSlotIndex
-- Integer32,
-- lswSubslotIndex
-- Integer32,
-- lswSubslotType
-- INTEGER,
-- lswSubslotPortNum
-- Integer32,
-- lswSubslotAdminStatus
-- INTEGER,
-- lswSubslotOperStatus
-- INTEGER
-- }
--lswSubslotFrameIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Fram index."
-- ::= {lswSubslotEntry 1}
--
--lswSubslotSlotIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "slot index."
-- ::= {lswSubslotEntry 2}
--
--lswSubslotIndex OBJECT-TYPE
-- SYNTAX Integer32 (0..65535)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Subslot index."
-- ::= {lswSubslotEntry 3}
--
-- value list of lswSubslotType are identical with the value list of lswSlotType.
--lswSubslotType OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- subcard4GE(1),
-- subcard1XG(2)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Type of the pinch board in the subslot."
-- ::= {lswSubslotEntry 4}
--
--lswSubslotPortNum OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Number of physical ports in the pinch board."
-- ::= {lswSubslotEntry 5}
--
--
--lswSubslotAdminStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- normal (1),
-- fault (2),
-- forbidden (3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Status of the pinch board in the subslot."
-- ::= {lswSubslotEntry 6}
--
--lswSubslotOperStatus OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- firstattach(0),
-- present(1),
-- absent(2),
-- available(3),
-- unavailable(4),
-- clearConfig (5)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Slot operationStatus ."
-- ::= {lswSubslotEntry 7}
lswDiagnosticBootupLevel OBJECT-TYPE
SYNTAX INTEGER
{
noDiagnostic (1),
minimal (2),
complete (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Diagnostic Bootup Level.
noDiagnostic (1),
minimal (2),
complete (3).
The configured value will be valid after next reload.
The return value is the current bootup diag level."
::= { lswdevMMibObject 7 }
--transceiverSfpMonitorResult OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (0..255))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "This string only for transceiver Sfp Monitor warning and alarm message traps
-- can not read and write."
-- ::= { lswdevMMibObject 9 }
transinformation OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Transceiver information description."
::= { lswdevMMibObject 10 }
transbasicinformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransbasicinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the basic information for transceiver."
::= {transinformation 1}
transbasicinformationEntry OBJECT-TYPE
SYNTAX TransbasicinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the basic information for transceiver."
INDEX {ifIndex}
::= {transbasicinformationTable 1}
TransbasicinformationEntry ::=
SEQUENCE{
transceiveType
OCTET STRING,
transceiveVender
OCTET STRING,
transceivePartNumber
OCTET STRING,
transceiveSerialNumber
OCTET STRING,
transceiveWaveLength
Integer32,
link9SinglemodeLengthKm
Integer32,
link9SinglemodeLengthM
Integer32,
link50MultimodeLength
Integer32,
link62MultimodeLength
Integer32,
linkCopperLength
Integer32,
transceiveStatus
OCTET STRING,
transceiveMointorStatus
OCTET STRING
}
transceiveType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver type. For example: 1000BASE-LX, 1000BASE-SX, 10GBASE-SR and so on."
::= {transbasicinformationEntry 1}
transceiveVender OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver vender name."
::= {transbasicinformationEntry 2}
transceivePartNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver PN information"
::= {transbasicinformationEntry 3}
transceiveSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver serial number information."
::= {transbasicinformationEntry 4}
transceiveWaveLength OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver Wavelength ,unit is nm(nanometer)."
::= {transbasicinformationEntry 5}
link9SinglemodeLengthKm OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Length for 9/125um single mode fiber,unit is km(kilometer)."
::= {transbasicinformationEntry 6}
link9SinglemodeLengthM OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Length for 9/125um single mode fiber,unit is m(meter)."
::= {transbasicinformationEntry 7}
link50MultimodeLength OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Length for 50/125um multi-mode fiber,unit is m(meter)."
::= {transbasicinformationEntry 8}
link62MultimodeLength OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Length for 62.5/125um multi-mode fiber,unit is m(meter)."
::= {transbasicinformationEntry 9}
linkCopperLength OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Length for copper,unit is m(meter)."
::= {transbasicinformationEntry 10}
transceiveStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver current status."
::= {transbasicinformationEntry 11}
transceiveMointorStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver current mointor status."
::= {transbasicinformationEntry 12}
-- End
-- transTemperinformationTable
transTemperinformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransTemperinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the temperature information for transceiver."
::= {transinformation 2}
transTemperinformationEntry OBJECT-TYPE
SYNTAX TransTemperinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the temperature information for transceiver."
INDEX {ifIndex}
::= {transTemperinformationTable 1}
TransTemperinformationEntry ::=
SEQUENCE{
temperHighAlarmThreshold
OCTET STRING,
temperLowAlarmThreshold
OCTET STRING,
temperHighWarnThreshold
OCTET STRING,
temperLowWarnThreshold
OCTET STRING,
temperCurrent
OCTET STRING
}
temperHighAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver temperature high-alarm threshold value,unit is Celsius."
::= {transTemperinformationEntry 1}
temperLowAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver temperature Low-alarm threshold value, unit is Celsius."
::= {transTemperinformationEntry 2}
temperHighWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver temperature high-warn threshold value,unit is Celsius."
::= {transTemperinformationEntry 3}
temperLowWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver temperature low-warn threshold value,unit is Celsius."
::= {transTemperinformationEntry 4}
temperCurrent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver currently temperature value,unit is Celsius . Display 4 vlaue in the case of 40G/100G fiber."
::= {transTemperinformationEntry 5}
--End
--3 transVoltageinformationTable
transVoltageinformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransVoltageinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the voltag information for transceiver."
::= {transinformation 3}
transVoltageinformationEntry OBJECT-TYPE
SYNTAX TransVoltageinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the voltag information for transceiver."
INDEX {ifIndex}
::= {transVoltageinformationTable 1}
TransVoltageinformationEntry ::=
SEQUENCE{
voltageHighAlarmThreshold
OCTET STRING,
voltageLowAlarmThreshold
OCTET STRING,
voltageHighWarnThreshold
OCTET STRING,
voltageLowWarnThreshold
OCTET STRING,
voltageCurrent
OCTET STRING
}
voltageHighAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver voltage high-alarm threshold value,unit is Voltage ."
::= {transVoltageinformationEntry 1}
voltageLowAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver voltage Low-alarm threshold value,unit is Voltage."
::= {transVoltageinformationEntry 2}
voltageHighWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver voltage high-warn threshold value,unit is Voltage."
::= {transVoltageinformationEntry 3}
voltageLowWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver voltage low-warn threshold value,unit is Voltage."
::= {transVoltageinformationEntry 4}
voltageCurrent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver currently voltage value, unit is Voltage. Display 4 vlaue in the case of 40G/100G fiber."
::= {transVoltageinformationEntry 5}
--End
-- transBiasinformationTable
transBiasinformationTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransBiasinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the Current information for transceiver."
::= {transinformation 4}
transBiasinformationEntry OBJECT-TYPE
SYNTAX TransBiasinformationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the current value information for transceiver."
INDEX {ifIndex}
::= {transBiasinformationTable 1}
TransBiasinformationEntry ::=
SEQUENCE{
biasHighAlarmThreshold
OCTET STRING,
biasLowAlarmThreshold
OCTET STRING,
biasHighWarnThreshold
OCTET STRING,
biasLowWarnThreshold
OCTET STRING,
biasCurrent
OCTET STRING
}
biasHighAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver bias high-alarm threshold value ,unit is mA(milliamperes)."
::= {transBiasinformationEntry 1}
biasLowAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver bias Low-alarm threshold value ,unit is mA(milliamperes)."
::= {transBiasinformationEntry 2}
biasHighWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver current high-warn threshold value ,unit is mA(milliamperes) ."
::= {transBiasinformationEntry 3}
biasLowWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver bias low-warn threshold value ,unit is mA(milliamperes)."
::= {transBiasinformationEntry 4}
biasCurrent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver currently bias value, unit is mA(milliamperes). Display 4 vlaue in the case of 40G/100G fiber."
::= {transBiasinformationEntry 5}
--End
-- 5 transTransmitPowerTables
transTransmitPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransTransmitPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the Transmit Power information for transceiver."
::= {transinformation 5}
transTransmitPowerEntry OBJECT-TYPE
SYNTAX TransTransmitPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the Transmit Power value information for transceiver."
INDEX {ifIndex}
::= {transTransmitPowerTable 1}
TransTransmitPowerEntry ::=
SEQUENCE{
transpowerHighAlarmThreshold
OCTET STRING,
transpowerLowAlarmThreshold
OCTET STRING,
transpowerHighWarnThreshold
OCTET STRING,
transpowerLowWarnThreshold
OCTET STRING,
transpowerCurrent
OCTET STRING
}
transpowerHighAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver transmit power high-alarm threshold value,unit is dBm."
::= {transTransmitPowerEntry 1}
transpowerLowAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver transmit power Low-alarm threshold value,unit is dBm."
::= {transTransmitPowerEntry 2}
transpowerHighWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver transmit power high-warn threshold value,unit is dBm."
::= {transTransmitPowerEntry 3}
transpowerLowWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver transmit power low-warn threshold value,unit is dBm."
::= {transTransmitPowerEntry 4}
transpowerCurrent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver currently transmit power value, unit is dBm. Display 4 vlaue in the case of 40G/100G fiber."
::= {transTransmitPowerEntry 5}
-- 6 transReceivePowerTable
transReceivePowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TransReceivePowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the receive Power information for transceiver."
::= {transinformation 6}
transReceivePowerEntry OBJECT-TYPE
SYNTAX TransReceivePowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Show the Transmit Power information for transceiver."
INDEX {ifIndex}
::= {transReceivePowerTable 1}
TransReceivePowerEntry ::=
SEQUENCE{
receivepowerHighAlarmThreshold
OCTET STRING,
receivepowerLowAlarmThreshold
OCTET STRING,
receivepowerHighWarnThreshold
OCTET STRING,
receivepowerLowWarnThreshold
OCTET STRING,
receivepowerCurrent
OCTET STRING
}
receivepowerHighAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver receive power high-alarm threshold value,unit is dBm."
::= {transReceivePowerEntry 1}
receivepowerLowAlarmThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver receive power Low-alarm threshold value,unit is dBm."
::= {transReceivePowerEntry 2}
receivepowerHighWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver receive power high-warn threshold value,unit is dBm."
::= {transReceivePowerEntry 3}
receivepowerLowWarnThreshold OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver receive power low-warn threshold value,unit is dBm."
::= {transReceivePowerEntry 4}
receivepowerCurrent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transceiver currently receive power value, unit is dBm. Display 4 vlaue in the case of 40G/100G fiber."
::= {transReceivePowerEntry 5}
poeInformation OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Transceiver information description."
::= { lswdevMMibObject 13 }
poeSysConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoeSysConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of PoE system configuration."
::= { poeInformation 1 }
poeSysConfigEntry OBJECT-TYPE
SYNTAX PoeSysConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of PoE system configuration."
INDEX { interfaceIndex }
::= { poeSysConfigTable 1 }
PoeSysConfigEntry ::=
SEQUENCE
{
poeSysConfigMaxPower
INTEGER,
poeSysConfigUtiliThresholdPower
INTEGER,
poeSysConfigReservePower
INTEGER,
poeSysConfigLegacy
INTEGER,
poeSysConfigPM
INTEGER
}
poeSysConfigMaxPower OBJECT-TYPE
SYNTAX INTEGER(15400..739200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PoE system max consumption (milli-watt)."
DEFVAL { 739200 }
::= { poeSysConfigEntry 1 }
poeSysConfigUtiliThresholdPower OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PSE alarm threshold of current consumption (percentage)."
DEFVAL { 90 }
::= { poeSysConfigEntry 2 }
poeSysConfigReservePower OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PSE reserved consumption (percentage)."
DEFVAL { 20 }
::= { poeSysConfigEntry 3 }
poeSysConfigLegacy OBJECT-TYPE
SYNTAX INTEGER {disable(1),enable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PoE system legacy capability.The meanings of the values are:
disable(1) - Enable legacy PD detection capability;
enable(2) - Disable legacy PD detection capability;"
DEFVAL { disable }
::= { poeSysConfigEntry 4 }
poeSysConfigPM OBJECT-TYPE
SYNTAX INTEGER {manual(1),auto(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PoE system power management.The meanings of the values are:
manual(1) - Manual mode;
auto(2) - Auto mode;"
DEFVAL { manual }
::= { poeSysConfigEntry 5 }
poeSysStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoeSysStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of PoE system status."
::= { poeInformation 2 }
poeSysStatusEntry OBJECT-TYPE
SYNTAX PoeSysStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of PoE system status information."
INDEX { interfaceIndex }
::= { poeSysStatusTable 1 }
PoeSysStatusEntry ::=
SEQUENCE
{
poeSysStatusCurPower
INTEGER,
poeSysStatusAverPower
INTEGER,
poeSysStatusPeakPower
INTEGER,
poeSysStatusMaxPower
INTEGER,
poeSysStatusRemainPower
INTEGER,
poeSysStatusUtiliThresholdPower
INTEGER,
poeSysStatusReservePower
INTEGER,
poeSysStatusCurVoltage
INTEGER,
poeSysStatusAverVoltage
INTEGER,
poeSysStatusPeakVoltage
INTEGER,
poeSysStatusLegacy
OCTET STRING,
poeSysStatusPM
OCTET STRING
}
poeSysStatusCurPower OBJECT-TYPE
SYNTAX INTEGER(0..739200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE total current consumption (milli-watt)."
DEFVAL { 0 }
::= { poeSysStatusEntry 1 }
poeSysStatusAverPower OBJECT-TYPE
SYNTAX INTEGER(0..739200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE history average consumption of certain period of time recently (milli-watt)."
DEFVAL { 0 }
::= { poeSysStatusEntry 2 }
poeSysStatusPeakPower OBJECT-TYPE
SYNTAX INTEGER(0..739200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE history peak consumption of certain period of time recently (milli-watt)."
DEFVAL { 0 }
::= { poeSysStatusEntry 3 }
poeSysStatusMaxPower OBJECT-TYPE
SYNTAX INTEGER(15400..739200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE system max consumption (milli-watt)."
DEFVAL { 0 }
::= { poeSysStatusEntry 4 }
poeSysStatusRemainPower OBJECT-TYPE
SYNTAX INTEGER(0..739200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE remaining power including PSE reserved power (milli-watt)."
DEFVAL { 0 }
::= { poeSysStatusEntry 5 }
poeSysStatusUtiliThresholdPower OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE alarm threshold of current consumption (percentage)."
DEFVAL { 0 }
::= { poeSysStatusEntry 6 }
poeSysStatusReservePower OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE reserved consumption (percentage)."
DEFVAL { 0 }
::= { poeSysStatusEntry 7 }
poeSysStatusCurVoltage OBJECT-TYPE
SYNTAX INTEGER(0..60000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE current voltage of supply power (milli-voltage)."
DEFVAL { 0 }
::= { poeSysStatusEntry 8 }
poeSysStatusAverVoltage OBJECT-TYPE
SYNTAX INTEGER(0..60000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE average voltage of supply power of certain period of time recently (milli-voltage)."
DEFVAL { 0 }
::= { poeSysStatusEntry 9 }
poeSysStatusPeakVoltage OBJECT-TYPE
SYNTAX INTEGER(0..60000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PSE peak voltage of supply power of certain period of time recently (milli-voltage)."
DEFVAL { 0 }
::= { poeSysStatusEntry 10 }
poeSysStatusLegacy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE system legacy capability."
DEFVAL { "disable" }
::= { poeSysStatusEntry 11 }
poeSysStatusPM OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE system power management."
DEFVAL { "manual" }
::= { poeSysStatusEntry 12 }
poePortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoePortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of PoE port status."
::= { poeInformation 3 }
poePortStatusEntry OBJECT-TYPE
SYNTAX PoePortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of PoE port status information."
INDEX { interfaceIndex }
::= { poePortStatusTable 1 }
PoePortStatusEntry ::=
SEQUENCE
{
poePortAdmin
OCTET STRING,
poePortPriority
OCTET STRING,
poePortOper
OCTET STRING,
poePortClass
OCTET STRING,
poePortCurPower
INTEGER,
poePortAverPower
INTEGER,
poePortPeakPower
INTEGER,
poePortMaxPower
INTEGER
}
poePortAdmin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port admin."
DEFVAL { "enable" }
::= { poePortStatusEntry 1 }
poePortPriority OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port priority level."
DEFVAL { "low" }
::= { poePortStatusEntry 2 }
poePortOper OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port operating result status."
::= { poePortStatusEntry 3 }
poePortClass OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port PD IEEE class level."
::= { poePortStatusEntry 4 }
poePortCurPower OBJECT-TYPE
SYNTAX INTEGER(0..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port current consumption (milli-watt)."
::= { poePortStatusEntry 5 }
poePortAverPower OBJECT-TYPE
SYNTAX INTEGER(0..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port history average consumption of certain period of time recently (milli-watt)."
::= { poePortStatusEntry 6 }
poePortPeakPower OBJECT-TYPE
SYNTAX INTEGER(0..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port history peak consumption of certain period of time recently (milli-watt)."
::= { poePortStatusEntry 7 }
poePortMaxPower OBJECT-TYPE
SYNTAX INTEGER(0..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get PoE port max consumption limit (milli-watt)."
::= { poePortStatusEntry 8 }
dyingGaspEvent OBJECT-TYPE
SYNTAX INTEGER
{
occur(1),
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get Dying Gasp State."
::= { lswdevMMibObject 14 }
extCardType OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of external card. The meanings of the values are:
0 external card is absent;
1 NM-2SFP+;
2 NM-4SFP+;
3 NM-4SFP."
DEFVAL { 0 }
::= { lswdevMMibObject 15 }
-- Sub Module: LSWTRAPMIB
lswTRAPMibObject OBJECT IDENTIFIER ::= { lswTrapMib 1 }
powerabsent NOTIFICATION-TYPE
OBJECTS { devMPowerIndex }
STATUS current
DESCRIPTION
"Power supply absent."
::= { lswTRAPMibObject 1 }
powerfailure NOTIFICATION-TYPE
OBJECTS { devMPowerIndex }
STATUS current
DESCRIPTION
"Power supply failure."
::= { lswTRAPMibObject 2 }
powerNormal NOTIFICATION-TYPE
OBJECTS { devMPowerIndex }
STATUS current
DESCRIPTION
"Power supply normal."
::= { lswTRAPMibObject 3 }
powerfanfailure NOTIFICATION-TYPE
OBJECTS { devMPowerIndex }
STATUS current
DESCRIPTION
"The fan of power supply failure."
::= { lswTRAPMibObject 4 }
fanfailure NOTIFICATION-TYPE
OBJECTS { devMFanPosition, devMFanModuleId, devMFanIndex }
STATUS current
DESCRIPTION
"Fan failure."
::= { lswTRAPMibObject 5 }
fanNormal NOTIFICATION-TYPE
OBJECTS { devMFanPosition, devMFanModuleId, devMFanIndex }
STATUS current
DESCRIPTION
"Fan normal."
::= { lswTRAPMibObject 6 }
--linecardRemoved NOTIFICATION-TYPE
-- OBJECTS {lswSlotFrameIndex, lswSlotIndex }
-- STATUS current
-- DESCRIPTION
-- "Linecard removed."
-- ::= { lswTRAPMibObject 7 }
--
--linecardInserted NOTIFICATION-TYPE
-- OBJECTS { lswSlotFrameIndex,lswSlotIndex }
-- STATUS current
-- DESCRIPTION
-- "Linecard inserted."
-- ::= { lswTRAPMibObject 8 }
--
--subcardRemove NOTIFICATION-TYPE
-- OBJECTS { lswSubslotFrameIndex, lswSubslotSlotIndex, lswSubslotIndex }
-- STATUS current
-- DESCRIPTION
-- "Sub card removed."
-- ::= { lswTRAPMibObject 9 }
--
--subcardInsert NOTIFICATION-TYPE
-- OBJECTS { lswSubslotFrameIndex, lswSubslotSlotIndex, lswSubslotIndex }
-- STATUS current
-- DESCRIPTION
-- "Sub card inserted."
-- ::= { lswTRAPMibObject 10 }
supervisorRemove NOTIFICATION-TYPE
OBJECTS { lswSlotFrameIndex,lswSlotIndex }
STATUS current
DESCRIPTION
"Supervisor card removed."
::= { lswTRAPMibObject 11 }
supervisorInsert NOTIFICATION-TYPE
OBJECTS { lswSlotFrameIndex,lswSlotIndex }
STATUS current
DESCRIPTION
"Supervisor card inserted."
::= { lswTRAPMibObject 12 }
boardTemperatureAlarm NOTIFICATION-TYPE
OBJECTS { lswSlotFrameIndex,lswSlotIndex,devMSlotEnvironmentValue }
STATUS current
DESCRIPTION
"Board temperature high."
::= { lswTRAPMibObject 13 }
boardTemperatureReturnNormal NOTIFICATION-TYPE
OBJECTS { lswSlotFrameIndex,lswSlotIndex,devMSlotEnvironmentValue }
STATUS current
DESCRIPTION
"Board temperature from higher to normal."
::= { lswTRAPMibObject 14 }
loadFailure NOTIFICATION-TYPE
OBJECTS { lswSlotFrameIndex,lswSlotIndex }
STATUS current
DESCRIPTION
"Board load failure."
::= { lswTRAPMibObject 15 }
loadFinished NOTIFICATION-TYPE
OBJECTS { lswSlotFrameIndex,lswSlotIndex }
STATUS current
DESCRIPTION
"Board load finished."
::= { lswTRAPMibObject 16 }
--fatalInterrupt NOTIFICATION-TYPE
-- OBJECTS { lswFatalInterruptAddr,lswFatalInterruptMask }
-- STATUS current
-- DESCRIPTION
-- "Get fatal interrupt message."
-- ::= { lswTRAPMibObject 17 }
transceiverInsert NOTIFICATION-TYPE
OBJECTS { transceiveStatus }
STATUS current
DESCRIPTION
"Transceiver inserted."
::= { lswTRAPMibObject 18 }
transceiverRemove NOTIFICATION-TYPE
OBJECTS { transceiveStatus }
STATUS current
DESCRIPTION
"Transceiver removed."
::= { lswTRAPMibObject 19 }
transceiverSfpMonitor NOTIFICATION-TYPE
OBJECTS { transceiveMointorStatus }
STATUS current
DESCRIPTION
"Transceiver Sfp Monitor has detected warning or alarm."
::= { lswTRAPMibObject 20}
chsmBootupDiagTrap NOTIFICATION-TYPE
OBJECTS { devMFanPosition }
STATUS current
DESCRIPTION
"Chsm bootup diag trap."
::= { lswTRAPMibObject 21}
chsmPoePortStatTrap NOTIFICATION-TYPE
OBJECTS { poeInformation }
STATUS current
DESCRIPTION
"Chsm PoE port status change trap."
::= { lswTRAPMibObject 22}
chsmPoeSysConsumpThresholdTrap NOTIFICATION-TYPE
OBJECTS { poeInformation }
STATUS current
DESCRIPTION
"Chsm PoE system consumption warn threshold trap."
::= { lswTRAPMibObject 23}
chsmPoePseVoltageTrap NOTIFICATION-TYPE
OBJECTS { poeInformation }
STATUS current
DESCRIPTION
"Chsm bootup diag trap."
::= { lswTRAPMibObject 24}
fanAbsent NOTIFICATION-TYPE
OBJECTS { devMFanIndex }
STATUS current
DESCRIPTION
"Fan absent."
::= { lswTRAPMibObject 25 }
fanPresent NOTIFICATION-TYPE
OBJECTS { devMFanIndex }
STATUS current
DESCRIPTION
"Fan present."
::= { lswTRAPMibObject 26 }
powerAlert NOTIFICATION-TYPE
OBJECTS { devMPowerIndex }
STATUS current
DESCRIPTION
"Power alert."
::= { lswTRAPMibObject 27 }
powerNoAlert NOTIFICATION-TYPE
OBJECTS { devMPowerIndex }
STATUS current
DESCRIPTION
"Power no alert."
::= { lswTRAPMibObject 28 }
dyingGasp NOTIFICATION-TYPE
OBJECTS { dyingGaspEvent }
STATUS current
DESCRIPTION
"Local Dying Gasp Event"
::= { lswTRAPMibObject 29 }
-- Sub Module: IPSOURCEGUARD
-- ip source guard binding type
IpSourceGuardType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"p source guard's binding type, ip, ip-mac, ip-vlan, ip-mac-vlan."
SYNTAX INTEGER
{
disable(0),
ip(1),
ipMac(2),
ip-vlan(3),
ipMacVlan(4)
}
--
-- Node of ipSourceGuard max number of binding entry perport
--
ipSourceGuardPerportMaximalnumber OBJECT-TYPE
SYNTAX Integer32 (0..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"config ip source guard max number of entry perport."
::= { ipSourceGuard 1 }
--
-- Nodes of ipSourceGuard entry table
--
ipSourceGuardBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSourceGuardBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of ip source guard binding entry.
"
::= { ipSourceGuard 2 }
ipSourceGuardBindingEntry OBJECT-TYPE
SYNTAX IpSourceGuardBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ip source guard binding entry."
INDEX { ipSourceGuardIpAddress}
::= { ipSourceGuardBindingTable 1 }
IpSourceGuardBindingEntry ::=
SEQUENCE
{
ipSourceGuardIpAddress
IpAddress,
ipSourceGuardMacAddress
OCTET STRING,
ipSourceGuardVlan
Integer32,
iSGIfIndex
Integer32,
ipSourceGuardRowStatus
RowStatus
}
ipSourceGuardIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ip address of a packet."
::= { ipSourceGuardBindingEntry 1 }
ipSourceGuardMacAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address of a packet."
::= { ipSourceGuardBindingEntry 2 }
ipSourceGuardVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN ID of a packet."
::= { ipSourceGuardBindingEntry 3 }
iSGIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface from which the packet comes."
::= { ipSourceGuardBindingEntry 4 }
ipSourceGuardRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ipSourceGuardBindingEntry 5 }
--
-- Nodes of ipSourceGuard enable on the interface
--
ipSourceGuardEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSourceGuardEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for ip source guard enable .
"
::= { ipSourceGuard 3 }
ipSourceGuardEnableEntry OBJECT-TYPE
SYNTAX IpSourceGuardEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry for ip source guard enable."
INDEX { iSGEnableIfIndex }
::= { ipSourceGuardEnableTable 1 }
IpSourceGuardEnableEntry ::=
SEQUENCE
{
iSGEnableIfIndex
Integer32,
ipSourceGuardEnableType
IpSourceGuardType
}
iSGEnableIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the interface index of isg enabled."
::= { ipSourceGuardEnableEntry 1 }
ipSourceGuardEnableType OBJECT-TYPE
SYNTAX IpSourceGuardType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the enable type of ip source guard, support ip, ip-mac, ip-vlan, ip-mac-vlan."
::= { ipSourceGuardEnableEntry 2}
-- Sub Module: VRRPEXT
-- ===================================================================
-- Start of MIB objects
-- ===================================================================
-- ===================================================================
-- VRRP EXT Table
-- ===================================================================
vrrpVrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of vrrp vrf."
::= { vrrpExt 1 }
vrrpVrfEntry OBJECT-TYPE
SYNTAX VrrpVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"rip vrf entry "
INDEX{ ifIndex, vrrpvrfVrId }
::= { vrrpVrfTable 1 }
VrrpVrfEntry ::=
SEQUENCE
{
vrrpvrfVrId
VrId,
vrrpvrfName
OCTET STRING,
vrrpvrfRowStatus
RowStatus
}
vrrpvrfVrId OBJECT-TYPE
SYNTAX VrId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the Virtual Router Identifier (VRID)."
::= { vrrpVrfEntry 1 }
vrrpvrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VRF name."
::= { vrrpVrfEntry 2 }
vrrpvrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { vrrpVrfEntry 3 }
vrrpLearnMasterTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpLearnMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set learnmaster mode for the session."
::= { vrrpExt 2 }
vrrpLearnMasterEntry OBJECT-TYPE
SYNTAX VrrpLearnMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Set learnmaster mode for the session."
INDEX { ifIndex, vrrpLearnVrId }
::= { vrrpLearnMasterTable 1 }
VrrpLearnMasterEntry ::=
SEQUENCE {
vrrpLearnVrId
VrId,
vrrpLearnMode
TruthValue
}
vrrpLearnVrId OBJECT-TYPE
SYNTAX VrId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the Virtual Router Identifier (VRID)."
::= { vrrpLearnMasterEntry 1 }
vrrpLearnMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Learnmaster mode."
::= { vrrpLearnMasterEntry 2 }
-- Sub Module: INTERFACE
interfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of interface entry."
::= { interface 1 }
interfaceEntry OBJECT-TYPE
SYNTAX InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"interface entry "
INDEX { interfaceIndex}
::= { interfaceTable 1 }
InterfaceEntry ::=
SEQUENCE
{
interfaceIndex
Integer32,
interfaceName
OCTET STRING,
interfaceType
INTEGER,
interfaceIPv4Addr
OCTET STRING,
interfaceDesc
OCTET STRING,
interfaceMediaType
INTEGER,
interfaceSpeed
INTEGER,
interfaceDuplex
INTEGER,
interfaceResetCnt
INTEGER,
interfaceArpRetryInterval
INTEGER,
interfaceArpTimeout
INTEGER,
interfaceArpClear
INTEGER,
interfacejumboFrameEnable
INTEGER,
interfaceClearIPv4Addr
INTEGER,
interfaceBandwidth
INTEGER,
interfacePortIsolateGroupID
INTEGER,
interfaceArpProxy
INTEGER,
interfaceLocalArpProxy
INTEGER,
interfacePoeAdmin
INTEGER,
interfacePoeBudget
INTEGER,
interfacePoePriority
INTEGER,
interfaceLoadInterval
INTEGER,
interfaceMtu
INTEGER,
interfaceIpUrpf
INTEGER,
interfaceIpv6Urpf
INTEGER,
interfaceIpv6DadAttempt
INTEGER,
interfaceNDClear
INTEGER
}
interfaceIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index. physical interface:0x1~0x3FF,
agg interface: 0x400~0x7FF, vlan interface:0x1000~0x1FFF,
lookback interface:0x3000~0x3FFF"
::= { interfaceEntry 1 }
interfaceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Interface name."
::= { interfaceEntry 2 }
interfaceType OBJECT-TYPE
SYNTAX INTEGER
{
switch(1),
route(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface type.1:switch 2:route."
::= { interfaceEntry 3 }
interfaceIPv4Addr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(9..18))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP addresses with mask , such as 123.123.123.123/24 ."
::= { interfaceEntry 4 }
interfaceDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..240))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Interface specific description."
::= { interfaceEntry 5 }
interfaceMediaType OBJECT-TYPE
SYNTAX INTEGER
{
autoSelect(0),
rj45(1),
sfp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port media type.0:auto-select 1:rj45 2:sfp."
::= { interfaceEntry 6 }
interfaceSpeed OBJECT-TYPE
SYNTAX INTEGER
{
auto(0),
speed10M(1),
speed100M(2),
speed1000M(3),
speed10G(4),
speed40G(5),
speed100G(6),
speed2halfG(7),
speed5G(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the port speed.0:auto 1:10 2:100 3:1000 4:10000 5:40000 6:100000 7:2500 8:5000."
::= { interfaceEntry 7 }
interfaceDuplex OBJECT-TYPE
SYNTAX INTEGER
{
auto(0),
half(1),
full(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the port duplexStatus .0:auto 1:half 2:full."
::= { interfaceEntry 8 }
interfaceResetCnt OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
resetCount(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset interface counters; 0: noUse, 1: resetCount."
::= { interfaceEntry 9 }
interfaceArpRetryInterval OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION " Set arp request retry delay value to interface. Interval range 0~3."
::= { interfaceEntry 10 }
interfaceArpTimeout OBJECT-TYPE
SYNTAX INTEGER(1..2147483)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Set arp age timeout value to interface. Timeout range 1~2147483. "
::= { interfaceEntry 11 }
interfaceArpClear OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
clearArp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear arp cache.0:no use, 1:clear arp. "
::= { interfaceEntry 12 }
interfacejumboFrameEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Jumbo frame. 1:enabel, 2:disable"
::= { interfaceEntry 13 }
interfaceClearIPv4Addr OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
clearIPv4Addr(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the IPv4 address of the interface including secondary IPv4 address.0:no use, 1:clear IPv4 address. "
::= { interfaceEntry 14 }
interfaceBandwidth OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set bandwidth informational parameter(bandwidth in kilobits). Use 0 to set default value.
The default value of 10M port is 10000.
The default value of 100M port is 100000.
The default value of 1000M port is 1000000."
::= { interfaceEntry 15 }
interfacePortIsolateGroupID OBJECT-TYPE
SYNTAX INTEGER(1..31255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the isolate group of a interface. isolate group id range is 1 ~ 31. and 255(0xFF) mean delete group. "
::= { interfaceEntry 16 }
interfaceArpProxy OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable or disable arp proxy feature."
DEFVAL { disable }
::= { interfaceEntry 17 }
interfaceLocalArpProxy OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable or disable local arp proxy feature."
DEFVAL { disable }
::= { interfaceEntry 18 }
interfacePoeAdmin OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2),force-power(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PoE port admin.The meanings of the values are:
enable(1) - Enable port PoE;
disable(2) - Disable port PoE;
force-power(3) - Force to power on port PoE;"
DEFVAL { enable }
::= { interfaceEntry 19 }
interfacePoeBudget OBJECT-TYPE
SYNTAX INTEGER(0..30000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PoE port max consumption limitation (milli-watt)."
DEFVAL { 30000 }
::= { interfaceEntry 20 }
interfacePoePriority OBJECT-TYPE
SYNTAX INTEGER{low(1),high(2),critical(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set PoE port priority level. The meanings of the value are:
low(1) - Low priority;
high(2) - High priority;
critical(3) - critical priority;"
DEFVAL { low }
::= { interfaceEntry 21 }
interfaceLoadInterval OBJECT-TYPE
SYNTAX INTEGER(30..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify interval for interface speed calculation.
Load-interval must be in increments of 30 seconds.
The load-interval ranges from 30 to 600 and default
value is 300."
DEFVAL { 300 }
::= { interfaceEntry 22 }
interfaceMtu OBJECT-TYPE
SYNTAX INTEGER(68..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set MTU of the interface."
DEFVAL { 1500 }
::= { interfaceEntry 23 }
interfaceIpUrpf OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IP Unicast reverse-path of the interface."
DEFVAL {disable }
::= { interfaceEntry 24 }
interfaceIpv6Urpf OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IPv6 Unicast reverse-path of the interface."
DEFVAL {disable }
::= { interfaceEntry 25 }
interfaceIpv6DadAttempt OBJECT-TYPE
SYNTAX INTEGER(0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IPv6 Duplicate address detection attempts number."
DEFVAL {1}
::= { interfaceEntry 26 }
interfaceNDClear OBJECT-TYPE
SYNTAX INTEGER{noUse(0),clearND(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear arp cache.0:no use, 1:clear ND."
::= { interfaceEntry 27 }
--
-- config interface secondary ip address
--
interfaceSecondaryIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF InterfaceSecondaryIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of interface secondary ip address."
::= { interface 2 }
interfaceSecondaryIpAddrEntry OBJECT-TYPE
SYNTAX InterfaceSecondaryIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"interface entry."
INDEX {interfaceIndex,ifSecondaryIpAddr}
::= { interfaceSecondaryIpAddrTable 1 }
InterfaceSecondaryIpAddrEntry ::=
SEQUENCE
{
ifSecondaryIpAddr
IpAddress,
ifSecondaryIpAddrMask
Integer32,
interfaceSecondaryIpAddrStatus
RowStatus
}
ifSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set secondary ip address on interface."
::= { interfaceSecondaryIpAddrEntry 1 }
ifSecondaryIpAddrMask OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Set secondary ip address mask on interface."
::= { interfaceSecondaryIpAddrEntry 2 }
interfaceSecondaryIpAddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { interfaceSecondaryIpAddrEntry 3 }
loopbackInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoopbackInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of loopback interface."
::= { interface 3 }
loopbackInterfaceEntry OBJECT-TYPE
SYNTAX LoopbackInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"loopback interface entry."
INDEX {loopbackInterfaceNum}
::= { loopbackInterfaceTable 1 }
LoopbackInterfaceEntry ::=
SEQUENCE
{
loopbackInterfaceNum
Integer32,
loopbackInterfaceIndex
Integer32,
loopbackInterfaceStatus
RowStatus
}
loopbackInterfaceNum OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of loopback interface."
::= { loopbackInterfaceEntry 1 }
loopbackInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of loopback interface."
::= { loopbackInterfaceEntry 2 }
loopbackInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { loopbackInterfaceEntry 3 }
--
-- config interface ipv6 address
--
interfaceIpv6AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF InterfaceIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of interface ipv6 address."
::= { interface 4 }
interfaceIpv6AddrEntry OBJECT-TYPE
SYNTAX InterfaceIpv6AddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"interface ipv6 address entry."
INDEX {interfaceIndex,ifIpv6Addr}
::= { interfaceIpv6AddrTable 1 }
InterfaceIpv6AddrEntry ::=
SEQUENCE
{
ifIpv6Addr
OCTET STRING,
ifIpv6AddrLength
Integer32,
ifIpv6AddrEui64
INTEGER,
ifIpv6AddrLinkLocal
INTEGER,
ifIpv6AddrStatus
RowStatus
}
ifIpv6Addr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set ipv6 address on interface."
::= { interfaceIpv6AddrEntry 1 }
ifIpv6AddrLength OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Set ipv6 address prefix length."
::= { interfaceIpv6AddrEntry 2 }
ifIpv6AddrEui64 OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Set ipv6 address use eui-64 interface identifier."
DEFVAL {disable}
::= { interfaceIpv6AddrEntry 3 }
ifIpv6AddrLinkLocal OBJECT-TYPE
SYNTAX INTEGER{enable(1),disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Set ipv6 link-local address."
DEFVAL {disable}
::= { interfaceIpv6AddrEntry 4 }
ifIpv6AddrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active."
::= { interfaceIpv6AddrEntry 5 }
interfaceTrapObject OBJECT IDENTIFIER ::= { interface 10 }
ifpReceiveManyErrorPacket NOTIFICATION-TYPE
OBJECTS { interfaceIndex }
STATUS current
DESCRIPTION
"Receive many CRC error packets on the interface."
::= { interfaceTrapObject 1 }
-- Sub Module: MANAGEMENTIP
managementIp OBJECT IDENTIFIER ::= { management 1 }
managementIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ManagementIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of management ip entry."
::= { managementIp 1 }
managementIpEntry OBJECT-TYPE
SYNTAX ManagementIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"interface entry "
INDEX { managementIpSlot}
::= { managementIpTable 1 }
ManagementIpEntry ::=
SEQUENCE
{
managementIpSlot
Integer32,
managementIPv4Addr
OCTET STRING,
managementRowStatus
RowStatus
}
managementIpSlot OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management ip slot."
::= { managementIpEntry 1 }
managementIPv4Addr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP addresses with masklen. The format is like 'xxx.xxx.xxx.xxx/xx'."
::= { managementIpEntry 2 }
managementRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of management IP row.Now only realize Create, Destroy and Active."
::= { managementIpEntry 3 }
managementGateway OBJECT IDENTIFIER ::= { management 3 }
managementIpGatewayTable OBJECT-TYPE
SYNTAX SEQUENCE OF ManagementIpGatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of management ip gateway entry."
::= { managementGateway 1 }
managementIpGatewayEntry OBJECT-TYPE
SYNTAX ManagementIpGatewayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"management ip Gateway entry."
INDEX { managementIpGatewaySlot, managementIpGateway }
::= { managementIpGatewayTable 1 }
ManagementIpGatewayEntry ::=
SEQUENCE
{
managementIpGatewaySlot
Integer32,
managementIpGateway
IpAddress,
managementIpGatewayStatus
RowStatus
}
managementIpGatewaySlot OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management ip gateway slot."
::= { managementIpGatewayEntry 1 }
managementIpGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Management ip gateway."
::= { managementIpGatewayEntry 2 }
managementIpGatewayStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { managementIpGatewayEntry 3 }
-- Sub Module: MVR
mvrGlobalStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable MVR on the switch."
::= { mvr 1 }
mvrGlobalGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrGlobalGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of MVR multicast group."
::= { mvr 2 }
mvrGlobalGroupEntry OBJECT-TYPE
SYNTAX MvrGlobalGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR multicast group entry."
INDEX { mvrGlobalGroup}
::= { mvrGlobalGroupTable 1 }
MvrGlobalGroupEntry ::=
SEQUENCE
{
mvrGlobalGroup
IpAddress,
mvrGlobalGroupRowStatus
RowStatus
}
mvrGlobalGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR multicast group."
::= { mvrGlobalGroupEntry 1 }
mvrGlobalGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mvrGlobalGroupEntry 2 }
mvrSourceVlan OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure a source VLAN for MVR; 0 unset source vlan."
::= { mvr 3 }
mvrSourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Mvr Source IP address. Use 0.0.0.0 to restore the default value."
::= { mvr 4 }
mvrSourcePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrSourcePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of MVR source port."
::= { mvr 5 }
mvrSourcePortEntry OBJECT-TYPE
SYNTAX MvrSourcePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR source port entry."
INDEX { mvrSourcePortIfindex}
::= { mvrSourcePortTable 1 }
MvrSourcePortEntry ::=
SEQUENCE
{
mvrSourcePortIfindex
Integer32,
mvrSourcePortRowStatus
RowStatus
}
mvrSourcePortIfindex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR source port ifindex."
::= { mvrSourcePortEntry 1 }
mvrSourcePortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mvrSourcePortEntry 2 }
mvrRcvPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrRcvPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of MVR receive port."
::= { mvr 6 }
mvrRcvPortEntry OBJECT-TYPE
SYNTAX MvrRcvPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR receive port entry."
INDEX { mvrRcvPortIfindex,mvrRcvVlanId}
::= { mvrRcvPortTable 1 }
MvrRcvPortEntry ::=
SEQUENCE
{
mvrRcvPortIfindex
Integer32,
mvrRcvVlanId
Integer32,
mvrRcvPortRowStatus
RowStatus
}
mvrRcvPortIfindex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR receive port ifindex."
::= { mvrRcvPortEntry 1 }
mvrRcvVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MVR receive vlan id."
::= { mvrRcvPortEntry 2 }
mvrRcvPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mvrRcvPortEntry 3 }
mvrIPMcastRouting OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable IP Multicast-routing on the switch."
::= { mvr 7 }
-- Sub Module: ERPS
-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
erpsDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of domain entry."
::= { erps 2 }
erpsDomainEntry OBJECT-TYPE
SYNTAX ErpsDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"domain entry."
INDEX { domainIndex}
::= { erpsDomainTable 1 }
ErpsDomainEntry ::=
SEQUENCE
{
domainIndex
Integer32,
domainName
OCTET STRING,
domainHellotime
Integer32,
domainFailtime
Integer32,
domainPrimaryControlVlan
Integer32,
domainSubControlVlan
Integer32,
domainEnable
INTEGER,
domainInstance
Integer32,
domainRowStatus
RowStatus
}
domainIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Domain index.Range 1~255."
::= { erpsDomainEntry 1 }
domainName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Domain name.Range 1~16.0 means default domain name"
::= { erpsDomainEntry 2 }
domainHellotime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain hello timer interval,the range is 1~~15.The default value is 1."
::= { erpsDomainEntry 3 }
domainFailtime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain fail timer interval,the range is 3~~45.The default value is 3."
::= { erpsDomainEntry 4 }
domainPrimaryControlVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain primary control vlan ,the range is 2~~4094."
::= { erpsDomainEntry 5 }
domainSubControlVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain sub control vlan ,the range is 2~~4094."
::= { erpsDomainEntry 6 }
domainEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the domain. Enable(1),Disable(2).
Only support set operation."
::= { erpsDomainEntry 7 }
domainInstance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set or unset the instance which the domain bound.
the range is 0~~4094. 0 is the default value"
::= { erpsDomainEntry 8 }
domainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize Destroy and Active."
::= { erpsDomainEntry 9 }
--erpsDomainStatsTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF ErpsDomainStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "table of domain statistics entry."
-- ::= { erps 3 }
--
--erpsDomainStatsEntry OBJECT-TYPE
-- SYNTAX ErpsDomainStatsEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Domain statistics entry."
-- INDEX { domainStatsIndex}
-- ::= { erpsDomainStatsTable 1 }
--
--ErpsDomainStatsEntry ::=
-- SEQUENCE
-- {
-- domainStatsIndex
-- Integer32,
-- domainStatsTotalSendPackets
-- Unsigned32,
-- domainStatsHelloSendPackets
-- Unsigned32,
-- domainStatsRingUpFlushFdbSendPackets
-- Unsigned32,
-- domainStatsRingDownFlushFdbSendPackets
-- Unsigned32,
-- domainStatsLinkDownSendPackets
-- Unsigned32,
-- domainStatsAskStateSendPackets
-- Unsigned32,
-- domainStatsTotalRecPackets
-- Unsigned32,
-- domainStatsHelloRecPackets
-- Unsigned32,
-- domainStatsRingUpFlushFdbRecPackets
-- Unsigned32,
-- domainStatsRingDownFlushFdbRecPackets
-- Unsigned32,
-- domainStatsLinkDownRecPackets
-- Unsigned32,
-- domainStatsAskStateRecPackets
-- Unsigned32,
-- domainStatsClearPackets
-- Integer32
-- }
--
--domainStatsIndex OBJECT-TYPE
-- SYNTAX Integer32 (0..65535)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 1 }
--
--domainStatsTotalSendPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 2 }
--
--domainStatsHelloSendPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 3 }
--
--domainStatsRingUpFlushFdbSendPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 4 }
--
--domainStatsRingDownFlushFdbSendPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 5 }
--
--domainStatsLinkDownSendPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 6 }
--
--domainStatsAskStateSendPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 7 }
--
--domainStatsTotalRecPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 8 }
--
--domainStatsHelloRecPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 9 }
--
--domainStatsRingUpFlushFdbRecPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 10 }
--
--domainStatsRingDownFlushFdbRecPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 11 }
--
--domainStatsLinkDownRecPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Domain statistics."
-- ::= { erpsDomainStatsEntry 12 }
--
--domainStatsAskStateRecPackets OBJECT-TYPE
-- SYNTAX Unsigned32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Domain statistics."
-- ::= { erpsDomainStatsEntry 13 }
--
--domainStatsClearPackets OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Clear domain statistics and the set number is 1."
-- ::= { erpsDomainStatsEntry 14 }
erpsRingTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of ring entry."
::= { erps 4 }
erpsRingEntry OBJECT-TYPE
SYNTAX ErpsRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"domain entry "
INDEX { ringIndex}
::= { erpsRingTable 1 }
ErpsRingEntry ::=
SEQUENCE
{
ringIndex
Integer32,
ringLevel
INTEGER,
ringmode
INTEGER,
ringEdgemode
INTEGER,
ringPrimaryIf
OCTET STRING,
ringSecondaryIf
OCTET STRING,
ringEdgeIf
OCTET STRING,
ringCommonIf
OCTET STRING,
ringSrpt
INTEGER,
ringEnable
INTEGER,
ringRowStatus
RowStatus,
ringStatus
INTEGER
}
ringIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ring index.Range 1~255."
::= { erpsRingEntry 1 }
ringLevel OBJECT-TYPE
SYNTAX INTEGER
{
primary(0),
sub(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create ring with level.primary:0 sub:1."
::= { erpsRingEntry 2 }
ringmode OBJECT-TYPE
SYNTAX INTEGER
{
unknow(0),
master(1),
transit(2),
vpls(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set ring mode.unknow:0 master:1 transit:2 vpls:3."
::= { erpsRingEntry 3 }
ringEdgemode OBJECT-TYPE
SYNTAX INTEGER
{
unknow(0),
edge(1),
assistantedge(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set ring mode.unknow:0 edge:1 assistantedge:2."
::= { erpsRingEntry 4 }
ringPrimaryIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set ring primary port."
::= { erpsRingEntry 5 }
ringSecondaryIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set ring primary port."
::= { erpsRingEntry 6 }
ringEdgeIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set ring edge port."
::= { erpsRingEntry 7 }
ringCommonIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set ring common port."
::= { erpsRingEntry 8 }
ringSrpt OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set ring srpt. enable:1 disable:2"
::= { erpsRingEntry 9 }
ringEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable ring. enable:1 disable:2"
::= { erpsRingEntry 10 }
ringRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize Destroy and Active."
::= { erpsRingEntry 11 }
ringStatus OBJECT-TYPE
SYNTAX INTEGER
{
idel(0),
complete(1),
failed(2),
linkup(3),
linkdown(4),
preforwording(5),
init(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this ring. idel(0), complete(1),
failed(2), linkup(3), linkdown(4),
preforwording(5), init(6)."
::= { erpsRingEntry 12 }
erpsRingStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsRingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of ring statistics entry."
::= { erps 5 }
erpsRingStatsEntry OBJECT-TYPE
SYNTAX ErpsRingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ring statistics entry."
INDEX { ringStatsIndex}
::= { erpsRingStatsTable 1 }
ErpsRingStatsEntry ::=
SEQUENCE
{
ringStatsIndex
Integer32,
ringStatsTotalSendPackets
Unsigned32,
ringStatsHelloSendPackets
Unsigned32,
ringStatsRingUpFlushFdbSendPackets
Unsigned32,
ringStatsRingDownFlushFdbSendPackets
Unsigned32,
ringStatsLinkDownSendPackets
Unsigned32,
ringStatsEdgeHelloSendPackets
Unsigned32,
ringStatsMajorFaultSendPackets
Unsigned32,
ringStatsTotalRecPackets
Unsigned32,
ringStatsHelloRecPackets
Unsigned32,
ringStatsRingUpFlushFdbRecPackets
Unsigned32,
ringStatsRingDownFlushFdbRecPackets
Unsigned32,
ringStatsLinkDownRecPackets
Unsigned32,
ringStatsEdgeHelloRecPackets
Unsigned32,
ringStatsMajorFaultRecPackets
Unsigned32,
ringStatsClearPackets
Integer32
}
ringStatsIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 1 }
ringStatsTotalSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 2 }
ringStatsHelloSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 3 }
ringStatsRingUpFlushFdbSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 4 }
ringStatsRingDownFlushFdbSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 5 }
ringStatsLinkDownSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 6 }
ringStatsEdgeHelloSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ring statistics."
::= { erpsRingStatsEntry 7 }
ringStatsMajorFaultSendPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 8 }
ringStatsTotalRecPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 9 }
ringStatsHelloRecPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 10 }
ringStatsRingUpFlushFdbRecPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ring statistics."
::= { erpsRingStatsEntry 11 }
ringStatsRingDownFlushFdbRecPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 12 }
ringStatsLinkDownRecPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 13 }
ringStatsEdgeHelloRecPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 14 }
ringStatsMajorFaultRecPackets OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ring statistics."
::= { erpsRingStatsEntry 15 }
ringStatsClearPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear ring statistics and the set number is 1."
::= { erpsRingStatsEntry 16 }
erpsTrapObject OBJECT IDENTIFIER ::= { erps 10 }
erpsLinkSwitch NOTIFICATION-TYPE
OBJECTS { ringStatus }
STATUS current
DESCRIPTION
"Erps link change notification."
::= { erpsTrapObject 1 }
-- Sub Module: PREFIXLIST
-- prefix list type - permit or deny
PrefixListType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"prefix list type, permit or deny."
SYNTAX INTEGER
{
deny(1),
permit(2)
}
-- prefix list clear value
PrefixListClearValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"prefix list value: 1."
SYNTAX INTEGER
{
clear(1)
}
-- prefix list sequence-use type
-- PrefixListSeqUseType ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "prefix list SEQUENCE-number use type "
-- SYNTAX INTEGER
-- {
-- useSeq(1),
-- noUseSeq(2)
-- }
--
-- Node of prefixListSeqNumUse
--
--prefixListSeqNumUse OBJECT-TYPE
-- SYNTAX PrefixListSeqUseType
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "config prefix list SEQUENCE number use "
-- ::= { prefixList 100 }
--
--
--
-- Nodes of prefixList entry table
--
prefixListTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrefixListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of prefix list entry."
::= { prefixList 1 }
prefixListEntry OBJECT-TYPE
SYNTAX PrefixListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ip prefix list entry."
INDEX { prefixListIpAddressType, prefixListIndex}
::= { prefixListTable 1 }
PrefixListEntry ::=
SEQUENCE
{
prefixListIpAddressType
InetAddressType,
prefixListIndex
Unsigned32,
prefixListName
OCTET STRING,
prefixListDescription
OCTET STRING,
prefixListRowStatus
RowStatus
}
prefixListIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ip type:ip or ipv6."
::= { prefixListEntry 1 }
prefixListIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"prefix list index."
::= { prefixListEntry 2 }
prefixListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"prefix list name, siez (1-20)."
::= { prefixListEntry 3 }
prefixListDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of the prefix list, size (0-80)"
::= { prefixListEntry 4 }
prefixListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { prefixListEntry 5 }
--
-- Nodes of prefixListRule entry table
--
prefixListRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrefixListRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of prefix list entry."
::= { prefixList 2 }
prefixListRuleEntry OBJECT-TYPE
SYNTAX PrefixListRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ip prefix list entry."
INDEX { prefixListRuleIpAddressType, prefixListRuleIndex, prefixListRuleSeq}
::= { prefixListRuleTable 1 }
PrefixListRuleEntry ::=
SEQUENCE
{
prefixListRuleIpAddressType
InetAddressType,
prefixListRuleIndex
Unsigned32,
prefixListRuleSeq
Unsigned32,
prefixListRuleIpAddress
InetAddress,
prefixListRuleMaskLen
Integer32,
prefixListRuleType
PrefixListType,
prefixListRuleGe
Integer32,
prefixListRuleLe
Integer32,
prefixListRuleRowStatus
RowStatus
}
prefixListRuleIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ip type:ip or ipv6."
::= { prefixListRuleEntry 1 }
prefixListRuleIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"prefix list index."
::= { prefixListRuleEntry 2 }
prefixListRuleSeq OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sequence number of prefix list entry."
::= { prefixListRuleEntry 3 }
prefixListRuleIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ip or ipv6 address."
::= { prefixListRuleEntry 4 }
prefixListRuleMaskLen OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ip address mask length."
::= { prefixListRuleEntry 5 }
prefixListRuleType OBJECT-TYPE
SYNTAX PrefixListType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of prefix list: permit or deny."
::= { prefixListRuleEntry 6 }
prefixListRuleGe OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Minimum prefix length."
::= { prefixListRuleEntry 7 }
prefixListRuleLe OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum prefix length."
::= { prefixListRuleEntry 8 }
prefixListRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { prefixListRuleEntry 9 }
--
-- Nodes of prefixListClear
--
prefixListClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrefixListClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of prefix list entry."
::= { prefixList 3 }
prefixListClearEntry OBJECT-TYPE
SYNTAX PrefixListClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ip prefix list clear entry."
INDEX { prefixListClearIpAddressType , prefixListClearIndex }
::= { prefixListClearTable 1 }
PrefixListClearEntry ::=
SEQUENCE
{
prefixListClearIpAddressType
InetAddressType,
prefixListClearIndex
Integer32,
prefixListClear
PrefixListClearValue
}
prefixListClearIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Clear type, ip or ipv6."
::= { prefixListClearEntry 1 }
prefixListClearIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"prefix list index."
::= { prefixListClearEntry 2 }
prefixListClear OBJECT-TYPE
SYNTAX PrefixListClearValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix list clear value : the only valid value is 1."
::= { prefixListClearEntry 3 }
--
-- Nodes of prefixListDetail entry table
--
prefixListDetailTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrefixListDetailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of prefix list entry."
::= { prefixList 4 }
prefixListDetailEntry OBJECT-TYPE
SYNTAX PrefixListDetailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ip prefix list detail entry."
INDEX { prefixListDetailIpAddressType, prefixListDetailIndex, prefixListDetailSeq}
::= { prefixListDetailTable 1 }
PrefixListDetailEntry ::=
SEQUENCE
{
prefixListDetailIpAddressType
InetAddressType,
prefixListDetailIndex
Unsigned32,
prefixListDetailSeq
Unsigned32,
prefixListDetailLastOperEntry
OCTET STRING,
prefixLisDetailCount
Integer32,
prefixListDetailRangeEntries
PrefixListType,
prefixListDetailSequences
OCTET STRING,
prefixListDetailHitCount
Integer32,
prefixListDetailRefcount
RowStatus
}
prefixListDetailIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ip type:ip or ipv6."
::= { prefixListDetailEntry 1 }
prefixListDetailIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"prefix list index."
::= { prefixListDetailEntry 2 }
prefixListDetailSeq OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sequence number of prefix list entry."
::= { prefixListDetailEntry 3 }
prefixListDetailLastOperEntry OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Prefix-list with the last deletion/insertion."
::= { prefixListDetailEntry 4 }
prefixLisDetailCount OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Prefix-list total Count."
::= { prefixListDetailEntry 5 }
prefixListDetailRangeEntries OBJECT-TYPE
SYNTAX PrefixListType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Prefix-list range entries."
::= { prefixListDetailEntry 6 }
prefixListDetailSequences OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Prefix-list Sequences."
::= { prefixListDetailEntry 7 }
prefixListDetailHitCount OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"some seq of prefix-list hit count."
::= { prefixListDetailEntry 8 }
prefixListDetailRefcount OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"some seq of prefix-list refcount."
::= { prefixListDetailEntry 9 }
-- Sub Module: IPUNICAST
ipUnicastStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpUnicastStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of ip source guard binding entry."
::= { ipUnicast 1 }
ipUnicastStaticRouteEntry OBJECT-TYPE
SYNTAX IpUnicastStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ip source guard binding entry."
INDEX
{
ipUnicastStaticRouteVrfId,
ipUnicastStaticRouteDestIpAddressType,
ipUnicastStaticRouteDestIpAddress,
ipUnicastStaticRouteDestMask,
ipUnicastStaticRouteGWIpAddressType,
ipUnicastStaticRouteGWIpAddress
}
::= { ipUnicastStaticRouteTable 1 }
IpUnicastStaticRouteEntry ::=
SEQUENCE
{
ipUnicastStaticRouteVrfId
Integer32,
ipUnicastStaticRouteDestIpAddressType
InetAddressType,
ipUnicastStaticRouteDestIpAddress
InetAddress,
ipUnicastStaticRouteDestMask
Integer32,
ipUnicastStaticRouteGWIpAddressType
InetAddressType,
ipUnicastStaticRouteGWIpAddress
InetAddress,
ipUnicastStaticRouteDistance
Integer32,
ipUnicastStaticRouteRowStatus
RowStatus
}
ipUnicastStaticRouteVrfId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vrf id the default value is 0."
-- DEFVAL { ipv4 }
::= { ipUnicastStaticRouteEntry 1 }
ipUnicastStaticRouteDestIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP addresses type (IPv4 or IPv6)."
-- DEFVAL { ipv4 }
::= { ipUnicastStaticRouteEntry 2 }
ipUnicastStaticRouteDestIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP destination prefix."
::= { ipUnicastStaticRouteEntry 3 }
ipUnicastStaticRouteDestMask OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DIP destination prefix mask."
::= { ipUnicastStaticRouteEntry 4 }
ipUnicastStaticRouteGWIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP addresses type (IPv4 or IPv6)."
-- DEFVAL { ipv4 }
::= { ipUnicastStaticRouteEntry 5 }
ipUnicastStaticRouteGWIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP gateway address."
::= { ipUnicastStaticRouteEntry 6 }
ipUnicastStaticRouteDistance OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance value for this route."
::= { ipUnicastStaticRouteEntry 7 }
ipUnicastStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ipUnicastStaticRouteEntry 8 }
--
-- clear all the static route
--
ipUnicastClrStaticRoute OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
resetCount(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear all the static route."
::= { ipUnicast 2 }
--
-- clear the static route on vrf
--
ipUnicastClrVrfStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpUnicastClrVrfStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ipUnicast 3 }
ipUnicastClrVrfStaticRouteEntry OBJECT-TYPE
SYNTAX IpUnicastClrVrfStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ipUnicastClrVrfStaticRouteIndex }
::= { ipUnicastClrVrfStaticRouteTable 1 }
IpUnicastClrVrfStaticRouteEntry ::=
SEQUENCE
{
ipUnicastClrVrfStaticRouteIndex
Integer32,
ipUnicastClrVrfStaticRoute
Integer32
}
ipUnicastClrVrfStaticRouteIndex OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ipUnicastClrVrfStaticRouteEntry 1 }
ipUnicastClrVrfStaticRoute OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ipUnicastClrVrfStaticRouteEntry 2 }
ipUnicastMaxStaticRoute OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allowed number of static routes."
::= { ipUnicast 4 }
ipUnicastMaxStaticV6Route OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allowed number of IPv6 static routes."
::= { ipUnicast 5 }
ipUnicastIcmpErrorInterval OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Error message interval(ms) of ICMP."
::= { ipUnicast 6 }
ipUnicastIcmpv6ErrorInterval OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Error message interval(ms) of ICMP."
::= { ipUnicast 7 }
-- Sub Module: AAA
-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
authenticationEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable authentication function. enable:1 disable:2."
::= { aaa 1 }
authenticationLoginTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthenticationLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of login entry."
::= { aaa 2 }
authenticationLoginEntry OBJECT-TYPE
SYNTAX AuthenticationLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Login entry "
INDEX { authenticationLoginIndex}
::= { authenticationLoginTable 1 }
AuthenticationLoginEntry ::=
SEQUENCE
{
authenticationLoginIndex
Integer32,
authenticationLoginName
OCTET STRING,
authenticationLoginOne
INTEGER,
authenticationLoginTwo
INTEGER,
authenticationLoginThree
INTEGER,
authenticationLoginFour
INTEGER,
authenticationLoginFive
INTEGER,
authenticationLoginSix
INTEGER,
authenticationLoginRowStatus
RowStatus
}
authenticationLoginIndex OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Login index."
::= { authenticationLoginEntry 1 }
authenticationLoginName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Login name. The default method list name is 'default'."
::= { authenticationLoginEntry 2 }
authenticationLoginOne OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
line(2),
none(3),
radius(4),
local(5),
tacacs-plus(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The first login type, enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)."
::= { authenticationLoginEntry 3 }
authenticationLoginTwo OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1),
line(2),
none(3),
radius(4),
local(5),
tacacs-plus(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The second login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)."
::= { authenticationLoginEntry 4 }
authenticationLoginThree OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1),
line(2),
none(3),
radius(4),
local(5),
tacacs-plus(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The third login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)."
::= { authenticationLoginEntry 5 }
authenticationLoginFour OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1),
line(2),
none(3),
radius(4),
local(5),
tacacs-plus(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fourth login type,disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)."
::= { authenticationLoginEntry 6 }
authenticationLoginFive OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1),
line(2),
none(3),
radius(4),
local(5),
tacacs-plus(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fifth login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)."
::= { authenticationLoginEntry 7 }
authenticationLoginSix OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1),
line(2),
none(3),
radius(4),
local(5),
tacacs-plus(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The fifth login type, disable(0),enable(1),line(2),none(3),radius(4),local(5),tacacs-plus(6)."
::= { authenticationLoginEntry 8 }
authenticationLoginRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { authenticationLoginEntry 9 }
authenticationLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthenticationLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of login entry."
::= { aaa 3 }
authenticationLineEntry OBJECT-TYPE
SYNTAX AuthenticationLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Login entry."
INDEX { authenticationLineIndex}
::= { authenticationLineTable 1 }
AuthenticationLineEntry ::=
SEQUENCE
{
authenticationLineIndex
Integer32,
authenticationLineLoginName
OCTET STRING
}
authenticationLineIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Login index."
::= { authenticationLineEntry 1 }
authenticationLineLoginName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set an authentication list for login name. The default login name is 'default'. Starting with alphabetic and can only include [0-9a-zA-Z.-_]. Its length range is [1, 32)"
::= { authenticationLineEntry 2 }
-- Sub Module: EVC
evcTable OBJECT-TYPE
SYNTAX SEQUENCE OF EvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of EVC entry. An Ethernet virtual connection (EVC) is a
logical relationship between Ethernet user-to-network interfaces (UNI) in a
provider-based Ethernet service."
::= { evc 1 }
evcEntry OBJECT-TYPE
SYNTAX EvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of EVC."
INDEX { evcIndex}
::= { evcTable 1 }
EvcEntry ::=
SEQUENCE {
evcIndex Integer32,
evcName OCTET STRING,
evcRowstatus RowStatus
}
evcIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of EVC table."
::= { evcEntry 1 }
evcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of EVC entry."
::= { evcEntry 2 }
evcRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { evcEntry 3 }
evcInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF EvcInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of EVC information."
::= { evc 2 }
evcInfoEntry OBJECT-TYPE
SYNTAX EvcInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "One entry of EVC information."
INDEX { evcInfoIndex}
::= { evcInfoTable 1 }
EvcInfoEntry ::=
SEQUENCE {
evcInfoIndex Integer32,
evcInfoMappedVlan Integer32,
evcInfoMappedDoubleVlan OCTET STRING,
evcInfoUsingNumber Integer32
}
evcInfoIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of EVC information table."
::= { evcInfoEntry 1 }
evcInfoMappedVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The vlan id of EVC mapped-vlan. The unset value is 0."
::= { evcInfoEntry 2 }
evcInfoMappedDoubleVlan OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..9))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The vlan id of EVC mapped-double-vlan.
The input value is like 2,3.
The first vlan id is EVC mapped-inner-vlan ID.
The second vlan id is EVC mapped-outer-vlan ID.
The unset value is NULL."
::= { evcInfoEntry 3 }
evcInfoUsingNumber OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of raw-vlan using this EVC."
::= { evcInfoEntry 4 }
-- Sub Module: QINQ
qinqVlanMappingTableObject OBJECT IDENTIFIER ::= { qinq 1 }
--
-- add/remove a vlan mapping table
--
qinqVlanMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table containing information of vlan mapping table."
::= { qinqVlanMappingTableObject 1 }
qinqVlanMappingEntry OBJECT-TYPE
SYNTAX QinqVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing information of vlan mapping table."
INDEX { qinqVlanMappingTableIndex}
::= { qinqVlanMappingTable 1 }
QinqVlanMappingEntry ::=
SEQUENCE {
qinqVlanMappingTableIndex Integer32,
qinqVlanMappingTableName OCTET STRING,
qinqVlanMappingTableRowstatus RowStatus
}
qinqVlanMappingTableIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "vlan mapping table index."
::= { qinqVlanMappingEntry 1 }
qinqVlanMappingTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "vlan mapping table name."
::= { qinqVlanMappingEntry 2 }
qinqVlanMappingTableRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { qinqVlanMappingEntry 3 }
--
-- Nodes of QinqVlanMappingTableRawVlanObject
--
qinqVlanMappingItemTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqVlanMappingItemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to describe the relation between raw-vlan and mapped-vlan."
::= { qinqVlanMappingTableObject 2 }
qinqVlanMappingItemEntry OBJECT-TYPE
SYNTAX QinqVlanMappingItemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry is used to describe one item of the relation between raw-vlan and mapped-vlan."
INDEX { qinqMappingEntryMappingTableIndex, qinqMappingEntryEvcIndex, qinqMappingEntryRawVid}
::= { qinqVlanMappingItemTable 1 }
QinqVlanMappingItemEntry ::=
SEQUENCE {
qinqMappingEntryMappingTableIndex Integer32,
qinqMappingEntryEvcIndex Integer32,
qinqMappingEntryRawVid Integer32,
qinqMappingEntryRowstatus RowStatus
}
qinqMappingEntryMappingTableIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The vlan mapping table index."
::= { qinqVlanMappingItemEntry 1 }
qinqMappingEntryEvcIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The EVC table index."
::= { qinqVlanMappingItemEntry 2 }
qinqMappingEntryRawVid OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Raw vlan tag for this entry.
Set to 0 to use for untagged mapped vlan tag.
Set to 4095 for out-of-range raw vlan."
::= { qinqVlanMappingItemEntry 3 }
qinqMappingEntryRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { qinqVlanMappingItemEntry 4 }
-- below is for double tag qinq
--
-- add/remove an untagged vlan mapping entry with evc to vlan mapping table
--
-- qinqVlanUntaggedMappingWithEvcTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF QinqVlanUntaggedMappingWithEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The table containing information of vlan mapping table."
-- ::= { qinqVlanMappingTableRawVlanObject 1 }
--
-- qinqVlanUntaggedMappingWithEvcEntry OBJECT-TYPE
-- SYNTAX QinqVlanUntaggedMappingWithEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An entry containing information of vlan mapping table."
-- INDEX { qinqUntaggedWithEvcMappingTableIndex }
-- ::= { qinqVlanUntaggedMappingWithEvcTable 1 }
--
-- QinqVlanUntaggedMappingWithEvcEntry ::=
-- SEQUENCE {
-- qinqUntaggedWithEvcMappingTableIndex Integer32,
-- qinqUntaggedWithEvcName OCTET STRING,
-- qinqUntaggedWithEvcFirstVlantag Integer32,
-- qinqUntaggedWithEvcSecondVlantag Integer32,
-- qinqUntaggedWithEvcRowstatus RowStatus
-- }
--
-- qinqUntaggedWithEvcMappingTableIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..64)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "vlan mapping table index."
-- ::= { qinqVlanUntaggedMappingWithEvcEntry 1 }
--
-- qinqUntaggedWithEvcName OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (0..16))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "evc name related to this entry."
-- ::= { qinqVlanUntaggedMappingWithEvcEntry 2 }
--
-- qinqUntaggedWithEvcFirstVlantag OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "first vlan tag for this entry if it need map double vlan.
-- default is 0xFFFF to not use double vlan."
-- ::= { qinqVlanUntaggedMappingWithEvcEntry 3 }
--
-- qinqUntaggedWithEvcSecondVlantag OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "mapped vlan tag."
-- ::= { qinqVlanUntaggedMappingWithEvcEntry 4 }
--
-- qinqUntaggedWithEvcRowstatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
-- 1 means Active
-- 4 means CreateAndGo
-- 6 means Destroy"
-- ::= { qinqVlanUntaggedMappingWithEvcEntry 5 }
--
-- add/remove an tagged vlan mapping entry with evc to vlan mapping table
--
-- qinqVlanTaggedMappingWithEvcTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF QinqVlanTaggedMappingWithEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The infomation of vlan mapping table entry."
-- ::= { qinqVlanMappingTableRawVlanObject 2 }
--
-- qinqVlanTaggedMappingWithEvcEntry OBJECT-TYPE
-- SYNTAX QinqVlanTaggedMappingWithEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "An entry containing information of vlan mapping table."
-- INDEX { qinqTaggedWithEvcMappingTableIndex, qinqTaggedWithEvcMappingRawVlantag }
-- ::= { qinqVlanTaggedMappingWithEvcTable 1 }
--
-- QinqVlanTaggedMappingWithEvcEntry ::=
-- SEQUENCE {
-- qinqTaggedWithEvcMappingTableIndex Integer32,
-- qinqTaggedWithEvcMappingRawVlantag Integer32,
-- qinqTaggedWithEvcName OCTET STRING,
-- qinqTaggedWithEvcMappingVlantag Integer32,
-- qinqTaggedWithEvcRowstatus RowStatus
-- }
--
-- qinqTaggedWithEvcMappingTableIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..64)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "vlan mapping table index."
-- ::= { qinqVlanTaggedMappingWithEvcEntry 1 }
--
-- qinqTaggedWithEvcMappingRawVlantag OBJECT-TYPE
-- SYNTAX Integer32 (1..4095)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "raw vlan tag for this entry.
-- set to 4095 to use for out of range mapped vlan tag."
-- ::= { qinqVlanTaggedMappingWithEvcEntry 2 }
--
-- qinqTaggedWithEvcName OBJECT-TYPE
-- SYNTAX OCTET STRING (SIZE (0..16))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "evc name related to this entry."
-- ::= { qinqVlanTaggedMappingWithEvcEntry 3 }
--
-- qinqTaggedWithEvcMappingVlantag OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "mapping vlan tag for this entry."
-- ::= { qinqVlanTaggedMappingWithEvcEntry 4 }
--
-- qinqTaggedWithEvcRowstatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
-- 1 means Active
-- 4 means CreateAndGo
-- 6 means Destroy"
-- ::= { qinqVlanTaggedMappingWithEvcEntry 5 }
--
-- add/remove an untagged or tagged vlan mapping entry without evc to vlan mapping table
--
-- qinqVlanMappingWithoutEvcTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF QinqVlanMappingWithoutEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The infomation of vlan mapping table entry."
-- ::= { qinqVlanMappingTableRawVlanObject 3 }
--
-- qinqVlanMappingWithoutEvcEntry OBJECT-TYPE
-- SYNTAX QinqVlanMappingWithoutEvcEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "The infomation of vlan mapping table entry."
-- INDEX { qinqWithoutEvcMappingTableIndex }
-- ::= { qinqVlanMappingWithoutEvcTable 1 }
--
-- QinqVlanMappingWithoutEvcEntry ::=
-- SEQUENCE {
-- qinqWithoutEvcMappingTableIndex Integer32,
-- qinqWithoutEvcMappingRawVlantag Integer32,
-- qinqWithoutEvcMappingVlantag Integer32,
-- qinqWithoutEvcRowstatus RowStatus
-- }
--
-- qinqWithoutEvcMappingTableIndex OBJECT-TYPE
-- SYNTAX Integer32 (1..64)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "vlan mapping table index."
-- ::= { qinqVlanMappingWithoutEvcEntry 1 }
--
-- qinqWithoutEvcMappingRawVlantag OBJECT-TYPE
-- SYNTAX Integer32 (0..4094)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "raw vlan tag for this entry.
-- set to 0 to use for untagged mapped vlan tag."
-- ::= { qinqVlanMappingWithoutEvcEntry 2 }
--
-- qinqWithoutEvcMappingVlantag OBJECT-TYPE
-- SYNTAX Integer32 (1..4094)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION "mapping vlan tag for this entry."
-- ::= { qinqVlanMappingWithoutEvcEntry 3 }
--
-- qinqWithoutEvcRowstatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
-- 1 means Active
-- 4 means CreateAndGo
-- 6 means Destroy"
-- ::= { qinqVlanMappingWithoutEvcEntry 4 }
--
-- Qinq Interface Object
--
qinqIfObject OBJECT IDENTIFIER ::= { qinq 2 }
--
-- set/unset an interface switch mode to dot1q tunnel
--
qinqIfModeDot1qTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfModeDot1qTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport mode."
::= { qinqIfObject 1 }
qinqIfModeDot1qTunnelEntry OBJECT-TYPE
SYNTAX QinqIfModeDot1qTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport mode."
INDEX { qinqIfModeDot1qTunnelIfIndex }
::= { qinqIfModeDot1qTunnelTable 1 }
QinqIfModeDot1qTunnelEntry ::=
SEQUENCE {
qinqIfModeDot1qTunnelIfIndex Integer32,
qinqIfModeDot1qTunnelRowstatus RowStatus
}
qinqIfModeDot1qTunnelIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to set to dot1q-tunnel mode."
::= { qinqIfModeDot1qTunnelEntry 1 }
qinqIfModeDot1qTunnelRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { qinqIfModeDot1qTunnelEntry 2 }
--
-- set an interface switch dot1q tunnel type
--
qinqIfDot1qTunnelTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfDot1qTunnelTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel type."
::= { qinqIfObject 2 }
qinqIfDot1qTunnelTypeEntry OBJECT-TYPE
SYNTAX QinqIfDot1qTunnelTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel type."
INDEX { qinqIfDot1qTunnelTypeIfIndex }
::= { qinqIfDot1qTunnelTypeTable 1 }
QinqIfDot1qTunnelTypeEntry ::=
SEQUENCE {
qinqIfDot1qTunnelTypeIfIndex Integer32,
qinqIfDot1qTunnelType INTEGER
}
qinqIfDot1qTunnelTypeIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to set dot1q-tunnel type."
::= { qinqIfDot1qTunnelTypeEntry 1 }
qinqIfDot1qTunnelType OBJECT-TYPE
SYNTAX INTEGER
{
selective(1),
basic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The do1q-tunnel type want to set.
1 selective.
2 basic."
::= { qinqIfDot1qTunnelTypeEntry 2 }
--
-- set an interface switch dot1q tunnel native vlan
--
qinqIfDot1qTunnelNativeVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfDot1qTunnelNativeVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel native vlan."
::= { qinqIfObject 3 }
qinqIfDot1qTunnelNativeVlanEntry OBJECT-TYPE
SYNTAX QinqIfDot1qTunnelNativeVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel native vlan."
INDEX { qinqIfDot1qTunnelNativeVlanIfIndex }
::= { qinqIfDot1qTunnelNativeVlanTable 1 }
QinqIfDot1qTunnelNativeVlanEntry ::=
SEQUENCE {
qinqIfDot1qTunnelNativeVlanIfIndex Integer32,
qinqIfDot1qTunnelNativeVlanId Integer32,
qinqIfDot1qTunnelNativeIsInnerVlan INTEGER,
qinqIfDot1qTunnelNativeRowStatus RowStatus
}
qinqIfDot1qTunnelNativeVlanIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to set dot1q-tunnel native vlan."
::= { qinqIfDot1qTunnelNativeVlanEntry 1 }
qinqIfDot1qTunnelNativeVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The do1q-tunnel native vlan id to set.
1 means set to default native vlan"
::= { qinqIfDot1qTunnelNativeVlanEntry 2 }
qinqIfDot1qTunnelNativeIsInnerVlan OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether the do1q-tunnel native vlan is inner vlan.
1:the vlan id is inner vlan id.
2:default, the vlan id is not inner vlan id.
"
::= { qinqIfDot1qTunnelNativeVlanEntry 3 }
qinqIfDot1qTunnelNativeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { qinqIfDot1qTunnelNativeVlanEntry 10 }
--
-- set an interface switch dot1q tunnel allow vlan
--
qinqIfDot1qTunnelAllowVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfDot1qTunnelAllowVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel allow vlan."
::= { qinqIfObject 4 }
qinqIfDot1qTunnelAllowVlanEntry OBJECT-TYPE
SYNTAX QinqIfDot1qTunnelAllowVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel allow vlan."
INDEX { qinqIfDot1qTunnelAllowVlanIfIndex }
::= { qinqIfDot1qTunnelAllowVlanTable 1 }
QinqIfDot1qTunnelAllowVlanEntry ::=
SEQUENCE {
qinqIfDot1qTunnelAllowVlanIfIndex Integer32,
qinqIfDot1qTunnelAllowVlanIdList OCTET STRING,
qinqIfDot1qTunnelAllowType INTEGER,
qinqIfDot1qTunnelAllowVlanId Integer32,
qinqIfDot1qTunnelAllowRowstatus RowStatus
}
qinqIfDot1qTunnelAllowVlanIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to set dot1q-tunnel allow vlan."
::= { qinqIfDot1qTunnelAllowVlanEntry 1 }
qinqIfDot1qTunnelAllowVlanIdList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The allowed vlan list belong to this dot1q tunnel port."
::= { qinqIfDot1qTunnelAllowVlanEntry 2 }
qinqIfDot1qTunnelAllowType OBJECT-TYPE
SYNTAX INTEGER
{
allowAll(1),
allowNone(2),
allowAdd(3),
allowRemove(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The do1q-tunnel type want to set.
1 allowAll.
2 allowNone.
3 allowAdd.
4 allowRemove.
This node is only use for set. The get value is always 0."
::= { qinqIfDot1qTunnelAllowVlanEntry 3 }
qinqIfDot1qTunnelAllowVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The do1q-tunnel allow vlan id to set.vlan id range 1~4094.
This node is only use for set. The get value is always 0.
Use 'qinqIfDot1qTunnelAllowVlanIdList' to get the dot1q vlan state of the interface."
::= { qinqIfDot1qTunnelAllowVlanEntry 4 }
qinqIfDot1qTunnelAllowRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. For this table, only realize CreateAndGo and Active.
If want to remove allowed vlan, use do1q-tunnel type 4(allowRemove).
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { qinqIfDot1qTunnelAllowVlanEntry 5 }
--
-- apply vlan mapping table on selective dot1q tunnel port
--
qinqIfDot1qTunnelApplyVlanMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfDot1qTunnelApplyVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel applied vlan mapping table."
::= { qinqIfObject 5 }
qinqIfDot1qTunnelApplyVlanMappingEntry OBJECT-TYPE
SYNTAX QinqIfDot1qTunnelApplyVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport dot1q tunnel applied vlan mapping table."
INDEX { qinqIfDot1qTunnelApplyIfIndex }
::= { qinqIfDot1qTunnelApplyVlanMappingTable 1 }
QinqIfDot1qTunnelApplyVlanMappingEntry ::=
SEQUENCE {
qinqIfDot1qTunnelApplyIfIndex Integer32,
qinqIfDot1qTunnelApplyVlanMappingTableName OCTET STRING,
qinqIfDot1qTunnelApplyRowstatus RowStatus
}
qinqIfDot1qTunnelApplyIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to apply vlan mapping table."
::= { qinqIfDot1qTunnelApplyVlanMappingEntry 1 }
qinqIfDot1qTunnelApplyVlanMappingTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan mapping table name want to apply to this interface."
::= { qinqIfDot1qTunnelApplyVlanMappingEntry 2 }
qinqIfDot1qTunnelApplyRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { qinqIfDot1qTunnelApplyVlanMappingEntry 3 }
--
-- enable vlan translation on trunk port
--
qinqIfVlanTranslationEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfVlanTranslationEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Enable/disable vlan translation of trunk port ."
::= { qinqIfObject 6 }
qinqIfVlanTranslationEnableEntry OBJECT-TYPE
SYNTAX QinqIfVlanTranslationEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Enable/disable vlan translation of trunk port"
INDEX { qinqIfVlanTransIfIndex }
::= { qinqIfVlanTranslationEnableTable 1 }
QinqIfVlanTranslationEnableEntry ::=
SEQUENCE {
qinqIfVlanTransIfIndex Integer32,
qinqIfVlanTransEnable INTEGER
}
qinqIfVlanTransIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to enable or disable vlan translation."
::= { qinqIfVlanTranslationEnableEntry 1 }
qinqIfVlanTransEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable vlan translation of trunk port."
::= { qinqIfVlanTranslationEnableEntry 2 }
--
-- apply vlan mapping table on vlan translation port
--
qinqIfVlanTransApplyVlanMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfVlanTransApplyVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport trunk vlan translation applied vlan mapping table."
::= { qinqIfObject 7 }
qinqIfVlanTransApplyVlanMappingEntry OBJECT-TYPE
SYNTAX QinqIfVlanTransApplyVlanMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface switchport trunk vlan translation applied vlan mapping table."
INDEX { qinqIfVlanTransApplyIfIndex }
::= { qinqIfVlanTransApplyVlanMappingTable 1 }
QinqIfVlanTransApplyVlanMappingEntry ::=
SEQUENCE {
qinqIfVlanTransApplyIfIndex Integer32,
qinqIfVlanTransApplyVlanMappingTableName OCTET STRING,
qinqIfVlanTransApplyRowstatus RowStatus
}
qinqIfVlanTransApplyIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to apply vlan mapping table."
::= { qinqIfVlanTransApplyVlanMappingEntry 1 }
qinqIfVlanTransApplyVlanMappingTableName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan mapping table name want to apply to this interface."
::= { qinqIfVlanTransApplyVlanMappingEntry 2 }
qinqIfVlanTransApplyRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { qinqIfVlanTransApplyVlanMappingEntry 3 }
--
-- set dot1q ethertype
--
qinqIfDot1qEthertypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqIfDot1qEthertypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface dot1q type."
::= { qinqIfObject 8 }
qinqIfDot1qEthertypeEntry OBJECT-TYPE
SYNTAX QinqIfDot1qEthertypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of interface dot1q type."
INDEX { qinqIfDot1qEthertypeIfIndex }
::= { qinqIfDot1qEthertypeTable 1 }
QinqIfDot1qEthertypeEntry ::=
SEQUENCE {
qinqIfDot1qEthertypeIfIndex Integer32,
qinqIfDot1qEthertype OCTET STRING
}
qinqIfDot1qEthertypeIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the interface which want to set ether type."
::= { qinqIfDot1qEthertypeEntry 1 }
qinqIfDot1qEthertype OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ethertype want to set to this interface.
the ethertype value, could be 0x0000 ~~ 0xFFFF"
::= { qinqIfDot1qEthertypeEntry 2 }
--
-- Qinq Vlan Dot1q Object
--
qinqVlanDot1qObject OBJECT IDENTIFIER ::= { qinq 3 }
--
-- Qinq Vlan Dot1q tag native Enable
--
qinqVlanDot1qTagNativeEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinqVlanDot1qTagNativeEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of tag native enable or not."
::= { qinqVlanDot1qObject 1 }
qinqVlanDot1qTagNativeEnableEntry OBJECT-TYPE
SYNTAX QinqVlanDot1qTagNativeEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of tag native enable or not."
INDEX { interfaceIndex }
::= { qinqVlanDot1qTagNativeEnableTable 1 }
QinqVlanDot1qTagNativeEnableEntry ::=
SEQUENCE {
qinqVlanDot1qTagNativeEnable INTEGER
}
qinqVlanDot1qTagNativeEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Tag Native. enable(1), disable(2)."
::= { qinqVlanDot1qTagNativeEnableEntry 2 }
-- Sub Module: RMONEXTENSION
-- Sub Module: RMONEXTENSION
rmonExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RmonExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"rmon extension table."
::= { rmonExt 1 }
rmonExtEntry OBJECT-TYPE
SYNTAX RmonExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rmon extension table entry."
INDEX { rmonExtIfIndex }
::= { rmonExtTable 1 }
RmonExtEntry ::=
SEQUENCE
{
rmonExtIfIndex Integer32,
rmonExtClrCounter INTEGER
}
rmonExtIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { rmonExtEntry 1 }
rmonExtClrCounter OBJECT-TYPE
SYNTAX INTEGER
{
resetCount(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset rmon counters on interface; 1: resetCount and return value is always 0."
::= { rmonExtEntry 2 }
-- Sub Module: LDPEXT
ldpExtRouterLdp OBJECT-TYPE
SYNTAX INTEGER
{
destroy(1),
create(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"destroy or create ldp instance. destroy:1 create:2."
::= { ldpExt 1 }
ldpExtGlobalConfig OBJECT IDENTIFIER ::= { ldpExt 2 }
ldpExtGlobalConfigCtlMode OBJECT-TYPE
SYNTAX INTEGER
{
independent(1),
ordered(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the control mode for label processing.
1 independent.
2 ordered."
::= { ldpExtGlobalConfig 1 }
ldpExtGlobalConfigExplicitNull OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"configure the router to send explicit-null labels for directly
connected FECs instead of implicit-null labels. disable:1 enable:2."
::= { ldpExtGlobalConfig 2 }
ldpExtGlobalConfigHelloInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the interval after which hello packets are sent out.Range 1~21845."
::= { ldpExtGlobalConfig 3 }
ldpExtGlobalConfigHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the global value for the hold-time after which the LSR
rejects adjacencies."
::= { ldpExtGlobalConfig 4 }
ldpExtGlobalConfigKeepAliveInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the global value for the interval after which keep-alive
packets are sent out."
::= { ldpExtGlobalConfig 5 }
ldpExtGlobalConfigKeepAliveTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the global value for the time-out after which sessions are
rejected."
::= { ldpExtGlobalConfig 6 }
ldpExtGlobalConfigMulticastHellos OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable the transmission of LDP Hello messages.
disable:1 enable:2."
::= { ldpExtGlobalConfig 7 }
ldpExtGlobalConfigRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the router-id to the supplied IP address."
::= { ldpExtGlobalConfig 8 }
ldpExtGlobalConfigTargetedPeerHelloInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the interval for sending unicast hello packets to targeted peers."
::= { ldpExtGlobalConfig 9 }
ldpExtGlobalConfigTargetedPeerHelloReceipt OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"toggle the receipt of targeted hello packets.disable:1 enable:2."
::= { ldpExtGlobalConfig 10 }
ldpExtGlobalConfigTargetedPeerHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the time-out value that is the time that the router waits
before rejecting an adjacency with targeted peers."
::= { ldpExtGlobalConfig 11 }
ldpExtGlobalConfigClrLdpAdjacencyAll OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
resetCount(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear all adjacencies for the current LSR."
::= { ldpExtGlobalConfig 12 }
ldpExtGlobalConfigClrLdpSessionAll OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
resetCount(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear all sessions for the current LSR."
::= { ldpExtGlobalConfig 13 }
ldpExtGlobalConfigClrLdpStatic OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
resetCount(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear LDP packet statistics."
::= { ldpExtGlobalConfig 14 }
ldpExtGlobalConfigClrLdpStaticAdvLbls OBJECT-TYPE
SYNTAX INTEGER
{
noUse(0),
resetCount(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"clear LDP advertise-labels statistics."
::= { ldpExtGlobalConfig 15 }
-- ===============================
-- ldpExtIfConfigTable
-- ===============================
ldpExtIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LdpExtIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ldp extention interface config table."
::= { ldpExt 3 }
ldpExtIfConfigEntry OBJECT-TYPE
SYNTAX LdpExtIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ldp extension interface config table entry."
INDEX {ldpExtIfConfigIfIndex }
::= { ldpExtIfConfigTable 1 }
LdpExtIfConfigEntry ::=
SEQUENCE
{
ldpExtIfConfigIfIndex
Integer32,
ldpExtIfConfigHelloInterval
Integer32,
ldpExtIfConfigHoldTime
Integer32,
ldpExtIfConfigKeepAliveInterval
Integer32,
ldpExtIfConfigKeepAliveTimeout
Integer32,
ldpExtIfConfigMulticastHellos
INTEGER,
ldpExtIfConfigTargetedPeerHelloInterval
Integer32,
ldpExtIfConfigTargetedPeerHoldTime
Integer32,
ldpExtIfConfigEnableLdp
INTEGER
}
ldpExtIfConfigIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { ldpExtIfConfigEntry 1 }
ldpExtIfConfigHelloInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the interval for sending multicast Hello packets
via an interface."
::= { ldpExtIfConfigEntry 2 }
ldpExtIfConfigHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the hold-time value after which the LSR rejects
adjacencies via an interface."
::= { ldpExtIfConfigEntry 3 }
ldpExtIfConfigKeepAliveInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the interval for sending keep-alive messages to
the peer in order to maintain a session."
::= { ldpExtIfConfigEntry 4 }
ldpExtIfConfigKeepAliveTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the keep-alive time-out value for rejecting
a session with a peer."
::= { ldpExtIfConfigEntry 5 }
ldpExtIfConfigMulticastHellos OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable multicast hello exchange on a specified interface.
disable:1 enable:2."
DEFVAL{ 2 }
::= { ldpExtIfConfigEntry 6 }
ldpExtIfConfigTargetedPeerHelloInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the interval for sending unicast hello packets to targeted
peers via this interface."
::= { ldpExtIfConfigEntry 7 }
ldpExtIfConfigTargetedPeerHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the time-out value that is the time that the router waits
before rejecting an adjacency with a targeted peer."
::= { ldpExtIfConfigEntry 8 }
ldpExtIfConfigEnableLdp OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable ldp function on a specified interface.
disable:1 enable:2."
::= { ldpExtIfConfigEntry 9 }
-- ===========================
-- ldpExtConfigTargetPeerTable
-- ===========================
ldpExtConfigTargetPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LdpExtConfigTargetPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"config target peer table."
::= { ldpExt 4 }
ldpExtConfigTargetPeerEntry OBJECT-TYPE
SYNTAX LdpExtConfigTargetPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ldp extension target peer table entry."
INDEX { ldpExtConfigTargetPeerAddr }
::= { ldpExtConfigTargetPeerTable 1 }
LdpExtConfigTargetPeerEntry ::=
SEQUENCE
{
ldpExtConfigTargetPeerAddr
IpAddress,
ldpExtConfigTargetPeerStatus
RowStatus
}
ldpExtConfigTargetPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"specify a targeted LDP peer."
::= { ldpExtConfigTargetPeerEntry 1 }
ldpExtConfigTargetPeerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ldpExtConfigTargetPeerEntry 2 }
-- ===================================================
-- transport address table
-- ===================================================
ldpExtConfigTransAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LdpExtConfigTransAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"config transport address table."
::= { ldpExt 5 }
ldpExtConfigTransAddrEntry OBJECT-TYPE
SYNTAX LdpExtConfigTransAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ldp extension transport address table entry."
INDEX { ldpExtGlobalConfigTransportAddress }
::= { ldpExtConfigTransAddrTable 1 }
LdpExtConfigTransAddrEntry ::=
SEQUENCE
{
ldpExtGlobalConfigTransportAddress
IpAddress,
ldpExtGlobalConfigTransportAddressStatus
RowStatus
}
ldpExtGlobalConfigTransportAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"configure the transport address for a label space."
::= { ldpExtConfigTransAddrEntry 1 }
ldpExtGlobalConfigTransportAddressStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ldpExtConfigTransAddrEntry 2 }
-- ==================================================
-- Advertise-Labels Table
-- ==================================================
ldpExtConfigAdvLblsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LdpExtConfigAdvLblsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"config advertise label table."
::= { ldpExt 6 }
ldpExtConfigAdvLblsEntry OBJECT-TYPE
SYNTAX LdpExtConfigAdvLblsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ldp advertise label table entry."
INDEX
{
ldpExtAdvLblsPrefixIndex,
ldpExtAdvLblsPeerIndex
}
::= { ldpExtConfigAdvLblsTable 1 }
LdpExtConfigAdvLblsEntry ::=
SEQUENCE
{
ldpExtAdvLblsPrefixIndex
Integer32,
ldpExtAdvLblsPeerIndex
Integer32,
ldpExtAdvLblsPrefixName
OCTET STRING,
ldpExtAdvLblsPeerName
OCTET STRING,
ldpExtAdvLblsStatus
RowStatus
}
ldpExtAdvLblsPrefixIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Advertise-Labels Table prefix index."
::= { ldpExtConfigAdvLblsEntry 1 }
ldpExtAdvLblsPeerIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Advertise-Labels Table peer index."
::= { ldpExtConfigAdvLblsEntry 2 }
ldpExtAdvLblsPrefixName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"specify Advertise-Labels Table prefix name."
::= { ldpExtConfigAdvLblsEntry 3 }
ldpExtAdvLblsPeerName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"specify Advertise-Labels Table peer name."
::= { ldpExtConfigAdvLblsEntry 4 }
ldpExtAdvLblsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ldpExtConfigAdvLblsEntry 5 }
-- ==================================================
-- Advertise-label to any table
-- ==================================================
ldpExtConfigAdvLblsToAnyTable OBJECT-TYPE
SYNTAX SEQUENCE OF LdpExtConfigAdvLblsToAnyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"config advertise label to any table."
::= { ldpExt 7 }
ldpExtConfigAdvLblsToAnyEntry OBJECT-TYPE
SYNTAX LdpExtConfigAdvLblsToAnyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ldp advertise label to any table entry."
INDEX { ldpExtAdvLblsPrefixIndex }
::= { ldpExtConfigAdvLblsToAnyTable 1 }
LdpExtConfigAdvLblsToAnyEntry ::=
SEQUENCE
{
ldpExtAdvLblsToAnyPrefixIndex
Integer32,
ldpExtAdvLblsToAnyPrefixName
OCTET STRING,
ldpExtAdvLblsToAnyStatus
RowStatus
}
ldpExtAdvLblsToAnyPrefixIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Advertise-Labels to any Table prefix index."
::= { ldpExtConfigAdvLblsToAnyEntry 1 }
ldpExtAdvLblsToAnyPrefixName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"specify which destinations have their labels advertised to
all LDP neighbors."
::= { ldpExtConfigAdvLblsToAnyEntry 2 }
ldpExtAdvLblsToAnyStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ldpExtConfigAdvLblsToAnyEntry 3 }
-- Sub Module: BGP4EXT
--
-- bgpLocalAs
--
bgpLocalAs OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local autonomous system number."
::= { bgp 1 }
--
-- bgpMibBindingVrf
--
bgpMibBinding OBJECT IDENTIFIER ::= { bgp 2 }
bgpMibBindingVrf OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP mib binding vrf."
::= { bgpMibBinding 1 }
bgpMibBindingVpnv4 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP mib binding vpnv4."
::= { bgpMibBinding 2 }
--
--BGP Global config
--
bgpGlobalConfig OBJECT IDENTIFIER ::= { bgp 3 }
bgpAlwaysCompareMed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow comparing MED from different neighbors."
::= { bgpGlobalConfig 1 }
bgpDeterministicMed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pick the best-MED path among paths advertised from the
neighboring AS."
::= { bgpGlobalConfig 2 }
bgpFastExternalFailover OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Immediately reset session if a link to a directly
connected external peer goes down."
::= { bgpGlobalConfig 3 }
bgpEnforceFirstAS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enforce the first AS for EBGP routes."
::= { bgpGlobalConfig 4 }
bgpBestpathCompareRouterid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Compare router-id for identical EBGP paths."
::= { bgpGlobalConfig 5 }
bgpBestpathCompareConfedASpath OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow comparing confederation AS path length."
::= { bgpGlobalConfig 6 }
bgpBestpathASPathIgnore OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ignore as-path length in selecting a route."
::= { bgpGlobalConfig 7 }
bgpBestpathMed OBJECT-TYPE
SYNTAX INTEGER
{
confed(1),
missing(2),
confedAndMissing(3),
none(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change the default bestpath selection MED attribute."
::= { bgpGlobalConfig 8 }
bgpDefaultIpv4Unicast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Activate ipv4-unicast for a peer by default."
::= { bgpGlobalConfig 9 }
bgpDefaultLocalPreference OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure default local preference value."
::= { bgpGlobalConfig 10 }
bgpLogNeighborChanges OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log neighbor up/down and reset reason."
::= { bgpGlobalConfig 11 }
bgpConfederationIdentifier OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set routing domain confederation AS."
::= { bgpGlobalConfig 12 }
bgpDistanceExternalRoutes OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance for routes external to the AS. Default: 20."
::= { bgpGlobalConfig 13 }
bgpDistanceInternalRoutes OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance for routes internal to the AS. Default: 200."
::= { bgpGlobalConfig 14 }
bgpDistancelocalRoutes OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Distance for routes local to the AS. Default: 200."
::= { bgpGlobalConfig 15 }
bgpClientToClientReflection OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure client to client route reflection."
::= { bgpGlobalConfig 16 }
bgpScanTime OBJECT-TYPE
SYNTAX Integer32 (0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure background scan interval(sec) [Default:60; Disable:0]."
::= { bgpGlobalConfig 17 }
bgpClusterIDDigit OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Route-Reflector Cluster-id as 32 bit quantity.
set to 0 to unset this node."
::= { bgpGlobalConfig 18 }
bgpClusterIDIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Route-Reflector Cluster-id in IP address format.
set to 0 to unset this node."
::= { bgpGlobalConfig 19 }
--
-- BGP4 Received Peers
--
bgpPeerExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpPeerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about routes to
destination networks from all BGP4 peers. Since
BGP4 can carry routes for multiple Network Layer
protocols, this table has the Address Family
Identifier(AFI) of the Network Layer protocol as the
first index. Further for a given AFI, routes carried
by BGP4 are distinguished based on Subsequent Address
Family Identifiers(SAFI). Hence that is used as the
second index. Conceptually there is a separate Loc-RIB
maintained by the BGP speaker for each combination of
AFI and SAFI supported by it."
REFERENCE
"RFC-1771: A Border Gateway Protocol 4 (BGP-4),
RFC-2858: Multiprotocol Extensions for BGP-4,
RFC-2547: BGP/MPLS VPNs."
::= { bgp 4 }
bgpPeerExtEntry OBJECT-TYPE
SYNTAX BgpPeerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network received from a peer."
INDEX { bgpPeerExtPeer }
::= { bgpPeerExtTable 1 }
BgpPeerExtEntry ::=
SEQUENCE {
bgpPeerExtPeer
InetAddress,
bgpPeerExtRemoteAS
INTEGER,
bgpPeerExtRowStats
RowStatus,
bgpPeerExtActivate
TruthValue,
bgpPeerExtPassive
TruthValue,
bgpPeerExtDescription
OCTET STRING,
bgpPeerExtCapabilityRouteRefresh
TruthValue,
bgpPeerExtCapabilityDynamic
TruthValue,
bgpPeerExtDontCapabilityNegotiate
TruthValue,
bgpPeerExtCapabilityOrf
INTEGER,
bgpPeerExtNextHopSelf
TruthValue,
bgpPeerExtRemovePrivateAS
TruthValue,
bgpPeerExtSendCommunity
INTEGER,
bgpPeerExtSoftReconfig
TruthValue,
bgpPeerExtRouteReflectorClient
TruthValue,
bgpPeerExtRouteServerClient
TruthValue,
bgpPeerExtAttrUnchangedASPath
TruthValue,
bgpPeerExtAttrUnchangedNexthop
TruthValue,
bgpPeerExtAttrUnchangedMed
TruthValue,
bgpPeerExtUpdateSource
Integer32,
bgpPeerExtDefaultOriginate
TruthValue,
bgpPeerExtPort
Integer32,
bgpPeerExtWeight
Integer32,
bgpPeerExtCollideEstablished
TruthValue,
bgpPeerExtOverrideCapability
TruthValue,
bgpPeerExtStrictCapabilityMatch
TruthValue,
bgpPeerExtAllowasIn
Integer32,
bgpPeerExtAsOverride
TruthValue,
bgpPeerExtMemberOfPeerGroupIndex
Integer32
}
bgpPeerExtPeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Network Layer address of the peer where the route
information was learned. An implementation is only
required to support an IPv4 peer."
::= { bgpPeerExtEntry 1 }
bgpPeerExtRemoteAS OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify AS number of BGP peer."
::= { bgpPeerExtEntry 2 }
bgpPeerExtRowStats OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { bgpPeerExtEntry 3 }
bgpPeerExtActivate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Address Family for this Neighbor."
::= { bgpPeerExtEntry 4 }
bgpPeerExtPassive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Don't send open messages to this peer."
::= { bgpPeerExtEntry 5 }
bgpPeerExtDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 80 characters describing this peer."
::= { bgpPeerExtEntry 6 }
bgpPeerExtCapabilityRouteRefresh OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advertise route-refresh capability to this peer."
::= { bgpPeerExtEntry 7 }
bgpPeerExtCapabilityDynamic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advertise dynamic capability to this peer."
::= { bgpPeerExtEntry 8 }
bgpPeerExtDontCapabilityNegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do not perform capability negotiation."
::= { bgpPeerExtEntry 9 }
bgpPeerExtCapabilityOrf OBJECT-TYPE
SYNTAX INTEGER
{
send(1),
receive(2),
both(3),
none(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advertise prefixlist ORF capability to this peer."
::= { bgpPeerExtEntry 10 }
bgpPeerExtNextHopSelf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable the next hop calculation for this neighbor."
::= { bgpPeerExtEntry 11 }
bgpPeerExtRemovePrivateAS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove private AS number from outbound updates."
::= { bgpPeerExtEntry 12 }
bgpPeerExtSendCommunity OBJECT-TYPE
SYNTAX INTEGER
{
standard(1),
extended(2),
both(3),
none(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send Community attribute to this neighbor."
::= { bgpPeerExtEntry 13 }
bgpPeerExtSoftReconfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow inbound soft reconfiguration for this peer."
::= { bgpPeerExtEntry 14 }
bgpPeerExtRouteReflectorClient OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a neighbor as Route Reflector client."
::= { bgpPeerExtEntry 15 }
bgpPeerExtRouteServerClient OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a neighbor as Route Server client."
::= { bgpPeerExtEntry 16 }
bgpPeerExtAttrUnchangedASPath OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP As-path attribute is propagated unchanged to this neighbor."
::= { bgpPeerExtEntry 17 }
bgpPeerExtAttrUnchangedNexthop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP Next-hop attribute is propagated unchanged to this neighbor."
::= { bgpPeerExtEntry 18 }
bgpPeerExtAttrUnchangedMed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP Med attribute is propagated unchanged to this neighbor."
::= { bgpPeerExtEntry 19 }
bgpPeerExtUpdateSource OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface ifindex."
::= { bgpPeerExtEntry 20 }
bgpPeerExtDefaultOriginate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Originate default route to this peer."
::= { bgpPeerExtEntry 21 }
bgpPeerExtPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Neighbor's BGP TCP port number."
::= { bgpPeerExtEntry 22 }
bgpPeerExtWeight OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set default weight for routes from this peer. Default: 0."
::= { bgpPeerExtEntry 23 }
bgpPeerExtCollideEstablished OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Include Neighbor in Established State for Collision Detection."
::= { bgpPeerExtEntry 24 }
bgpPeerExtOverrideCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Override capability negotiation result."
::= { bgpPeerExtEntry 25 }
bgpPeerExtStrictCapabilityMatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Strict capability negotiation match."
::= { bgpPeerExtEntry 26 }
bgpPeerExtAllowasIn OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Strict capability negotiation match."
::= { bgpPeerExtEntry 27 }
bgpPeerExtAsOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"override AS path."
::= { bgpPeerExtEntry 28 }
bgpPeerExtMemberOfPeerGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"override AS path."
::= { bgpPeerExtEntry 29 }
--
-- BGP4 Peer group
--
bgpPeerGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpPeerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure peer-group."
::= { bgp 5 }
bgpPeerGroupEntry OBJECT-TYPE
SYNTAX BgpPeerGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network received from a peer."
INDEX { bgpPeerGroupIndex }
::= { bgpPeerGroupTable 1 }
BgpPeerGroupEntry ::=
SEQUENCE {
bgpPeerGroupIndex
Integer32,
bgpPeerGroupName
OCTET STRING,
bgpPeerGroupRowStats
RowStatus,
bgpPeerGroupRemoteAS
INTEGER,
bgpPeerGroupActivate
TruthValue,
bgpPeerGroupPassive
TruthValue,
bgpPeerGroupDescription
OCTET STRING,
bgpPeerGroupCapabilityRouteRefresh
TruthValue,
bgpPeerGroupCapabilityDynamic
TruthValue,
bgpPeerGroupDontCapabilityNegotiate
TruthValue,
bgpPeerGroupCapabilityOrf
INTEGER,
bgpPeerGroupNextHopSelf
TruthValue,
bgpPeerGroupRemovePrivateAS
TruthValue,
bgpPeerGroupSendCommunity
INTEGER,
bgpPeerGroupSoftReconfig
TruthValue,
bgpPeerGroupRouteReflectorClient
TruthValue,
bgpPeerGroupRouteServerClient
TruthValue,
bgpPeerGroupAttrUnchangedASPath
TruthValue,
bgpPeerGroupAttrUnchangedNexthop
TruthValue,
bgpPeerGroupAttrUnchangedMed
TruthValue,
bgpPeerGroupUpdateSource
Integer32,
bgpPeerGroupDefaultOriginate
TruthValue,
bgpPeerGroupPort
Integer32,
bgpPeerGroupWeight
Integer32,
bgpPeerGroupCollideEstablished
TruthValue,
bgpPeerGroupOverrideCapability
TruthValue,
bgpPeerGroupStrictCapabilityMatch
TruthValue,
bgpPeerGroupAllowasIn
Integer32,
bgpPeerGroupAsOverride
TruthValue
}
bgpPeerGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peer group index."
::= { bgpPeerGroupEntry 1 }
bgpPeerGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Peer group name."
::= { bgpPeerGroupEntry 2 }
bgpPeerGroupRowStats OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { bgpPeerGroupEntry 3 }
bgpPeerGroupRemoteAS OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify AS number of BGP peer."
::= { bgpPeerGroupEntry 4 }
bgpPeerGroupActivate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Address Family for this Neighbor."
::= { bgpPeerGroupEntry 5 }
bgpPeerGroupPassive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Don't send open messages to this peer."
::= { bgpPeerGroupEntry 6 }
bgpPeerGroupDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up to 80 characters describing this peer."
::= { bgpPeerGroupEntry 7 }
bgpPeerGroupCapabilityRouteRefresh OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advertise route-refresh capability to this peer."
::= { bgpPeerGroupEntry 8 }
bgpPeerGroupCapabilityDynamic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advertise dynamic capability to this peer."
::= { bgpPeerGroupEntry 9 }
bgpPeerGroupDontCapabilityNegotiate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do not perform capability negotiation."
::= { bgpPeerGroupEntry 10 }
bgpPeerGroupCapabilityOrf OBJECT-TYPE
SYNTAX INTEGER
{
send(1),
receive(2),
both(3),
none(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Advertise prefixlist ORF capability to this peer."
::= { bgpPeerGroupEntry 11 }
bgpPeerGroupNextHopSelf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable the next hop calculation for this neighbor."
::= { bgpPeerGroupEntry 12 }
bgpPeerGroupRemovePrivateAS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove private AS number from outbound updates."
::= { bgpPeerGroupEntry 13 }
bgpPeerGroupSendCommunity OBJECT-TYPE
SYNTAX INTEGER
{
standard(1),
extended(2),
both(3),
none(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send Community attribute to this neighbor."
::= { bgpPeerGroupEntry 14 }
bgpPeerGroupSoftReconfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow inbound soft reconfiguration for this peer."
::= { bgpPeerGroupEntry 15 }
bgpPeerGroupRouteReflectorClient OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a neighbor as Route Reflector client."
::= { bgpPeerGroupEntry 16 }
bgpPeerGroupRouteServerClient OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a neighbor as Route Server client."
::= { bgpPeerGroupEntry 17 }
bgpPeerGroupAttrUnchangedASPath OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP As-path attribute is propagated unchanged to this neighbor."
::= { bgpPeerGroupEntry 18 }
bgpPeerGroupAttrUnchangedNexthop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP Next-hop attribute is propagated unchanged to this neighbor."
::= { bgpPeerGroupEntry 19 }
bgpPeerGroupAttrUnchangedMed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP Med attribute is propagated unchanged to this neighbor."
::= { bgpPeerGroupEntry 20 }
bgpPeerGroupUpdateSource OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interface ifindex."
::= { bgpPeerGroupEntry 21 }
bgpPeerGroupDefaultOriginate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Originate default route to this peer."
::= { bgpPeerGroupEntry 22 }
bgpPeerGroupPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Neighbor's BGP TCP port number."
::= { bgpPeerGroupEntry 23 }
bgpPeerGroupWeight OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set default weight for routes from this peer."
::= { bgpPeerGroupEntry 24 }
bgpPeerGroupCollideEstablished OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Include Neighbor in Established State for Collision Detection."
::= { bgpPeerGroupEntry 25 }
bgpPeerGroupOverrideCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Override capability negotiation result."
::= { bgpPeerGroupEntry 26 }
bgpPeerGroupStrictCapabilityMatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Strict capability negotiation match."
::= { bgpPeerGroupEntry 27 }
bgpPeerGroupAllowasIn OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Strict capability negotiation match."
::= { bgpPeerGroupEntry 28 }
bgpPeerGroupAsOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"override AS path."
::= { bgpPeerGroupEntry 29 }
--
--BGP address family
--
bgpAddressFamily OBJECT IDENTIFIER ::= { bgp 6 }
bgpAddressFamilyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"address family name."
::= { bgpAddressFamily 1 }
bgpAddressFamilyRouterId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Manually configured router identifier."
::= { bgpAddressFamily 2 }
bgpAddressFamilyRedistConnect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute connect information from another routing protocol."
::= { bgpAddressFamily 3 }
bgpAddressFamilyRedistStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute static information from another routing protocol."
::= { bgpAddressFamily 4 }
bgpAddressFamilyRedistRip OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute RIP information from another routing protocol."
::= { bgpAddressFamily 5 }
bgpAddressFamilyRedistOspf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redistribute OSPF information from another routing protocol."
::= { bgpAddressFamily 6 }
bgpAddressFamilySynchronization OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Perform IGP synchronization."
::= { bgpAddressFamily 7 }
bgpAddressFamilyDefaultInfoOrig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control distribution of default information."
::= { bgpAddressFamily 8 }
bgpAddressFamilyNetworkSynch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Perform IGP synchronization on network routes."
::= { bgpAddressFamily 9 }
--
--BGP clear table
--
bgpClearTable OBJECT IDENTIFIER ::= { bgp 7 }
bgpClearAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 1 }
bgpClearExternalPeers OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 2 }
bgpClearUnicastSoftOut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 3 }
bgpClearMulticastSoftOut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 4 }
bgpClearVpnv4UnicastSoftOut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 5 }
bgpClearExternalSoftOut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 6 }
bgpClearExternalUnicastSoftOut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 7 }
bgpClearExternalMulticastSoftOut OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 8 }
bgpClearSoftIn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 9 }
bgpClearInPrefixFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 10 }
bgpClearUnicastSoftIn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 11 }
bgpClearMulticastSoftIn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 12 }
bgpClearUnicastInPrefixFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 13 }
bgpClearMulticastInPrefixFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 14 }
bgpClearVpnv4UnicastSoftIn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 15 }
bgpClearExternalSoftIn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 16 }
bgpClearExternalInPrefixFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 17 }
bgpClearExternalUnicastSoftIn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 18 }
bgpClearExternalMulticastSoftIn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 19 }
bgpClearExternalUnicastInPrefixFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 20 }
bgpClearExternalMulticastInPrefixFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 21 }
bgpClearUnicastSoft OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 22 }
bgpClearMulticastSoft OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 23 }
bgpClearVpnv4UnicastSoft OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 24 }
bgpClearExternalUnicastSoft OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 25 }
bgpClearExternalMulticastSoft OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 26 }
bgpClearDampening OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node only supports set operation.
If the value is true, it will clear all of statistics."
::= { bgpClearTable 27 }
-- Sub Module: MPLS
mplsLspTunnelingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspTunnelingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel a transit LSP."
::= { mpls 1 }
mplsLspTunnelingEntry OBJECT-TYPE
SYNTAX MplsLspTunnelingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspTunnelingTable."
INDEX { mplsLspTunnelingInLabel}
::= { mplsLspTunnelingTable 1 }
MplsLspTunnelingEntry ::=
SEQUENCE {
mplsLspTunnelingInLabel Integer32,
mplsLspTunnelingOutLabel Integer32,
mplsLspTunnelingDestAddr IpAddress,
mplsLspTunnelingMaskLen Integer32,
mplsLspTunnelingRowStatus RowStatus,
mplsLspTunnelingState INTEGER
}
mplsLspTunnelingInLabel OBJECT-TYPE
SYNTAX Integer32 (16..1048575)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Incoming Label Value between 16 and 1048575."
::= { mplsLspTunnelingEntry 1 }
mplsLspTunnelingOutLabel OBJECT-TYPE
SYNTAX Integer32 (16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outgoing label of the transit lsp,0,3,16-1048575."
::= { mplsLspTunnelingEntry 2 }
mplsLspTunnelingDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv4 network FEC for identifying tunnel LSP."
::= { mplsLspTunnelingEntry 3 }
mplsLspTunnelingMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of iPv4 network FEC mask for identifying tunnel LSP,
between 0 and 32."
::= { mplsLspTunnelingEntry 4 }
mplsLspTunnelingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsLspTunnelingEntry 10 }
mplsLspTunnelingState OBJECT-TYPE
SYNTAX INTEGER {selected(1),non-selected(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the LSP tunneling entry.The meanings of the values are:
selected(1) - the LSP tunneling entry is selected;
non-selected(2) - the LSP tunneling entry is not selected;"
::= { mplsLspTunnelingEntry 11 }
mplsMapRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsMapRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"mpls map-route A.B.C.D N F.G.H.I N."
::= { mpls 2 }
mplsMapRouteEntry OBJECT-TYPE
SYNTAX MplsMapRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsMapRouteTable."
INDEX { mplsMapRouteSrcAddr, mplsMapRouteSrcMaskLen}
::= { mplsMapRouteTable 1 }
MplsMapRouteEntry ::=
SEQUENCE
{
mplsMapRouteSrcAddr IpAddress,
mplsMapRouteSrcMaskLen Integer32,
mplsMapRouteDestAddr IpAddress,
mplsMapRouteDestMaskLen Integer32,
mplsMapRouteTunnelName OCTET STRING,
mplsMapRouteRowStatus RowStatus
}
mplsMapRouteSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IpAddress of IPv4 prefix to be mapped."
::= { mplsMapRouteEntry 1 }
mplsMapRouteSrcMaskLen OBJECT-TYPE
SYNTAX Integer32(0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mask length of IPv4 prefix to be mapped.Must be between 0 and 32."
::= { mplsMapRouteEntry 2 }
mplsMapRouteDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv4 Forwarding Equivalence Class for route to be mapped to."
::= { mplsMapRouteEntry 3 }
mplsMapRouteDestMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask length for IPv4 Forwarding Equivalence Class."
::= { mplsMapRouteEntry 4 }
mplsMapRouteTunnelName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPLS tunnel for route to be mapped to. If this node is set,
mplsMapRouteDestAddr and mplsMapRouteDestMaskLen are invalid."
::= { mplsMapRouteEntry 5 }
mplsMapRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsMapRouteEntry 10 }
mplsEnableAllInterfaces OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable all interfaces for MPLS.
1 is enable, 2 is disable."
::= { mpls 3 }
-- mplsPropagateTtl OBJECT-TYPE
-- SYNTAX INTEGER
-- {
-- enable(1),
-- disable(2)
-- }
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable/disable mpls PropagateTtl.
-- 1 is enable, 2 is disable."
-- ::= { mpls 4}
mplsVpwsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specify an MPLS Layer-2 Virtual Circuit."
::= { mpls 5 }
mplsVpwsEntry OBJECT-TYPE
SYNTAX MplsVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVpwsTable."
INDEX { mplsVpwsVcId}
::= { mplsVpwsTable 1 }
MplsVpwsEntry ::=
SEQUENCE {
mplsVpwsVcId Unsigned32,
mplsVpwsVcName OCTET STRING,
mplsVpwsPeerAddr IpAddress,
mplsVpwsIsManual Integer32,
mplsVpwsMtu Integer32,
mplsVpwsPwMode Integer32,
mplsVpwsControlWord INTEGER,
mplsVpwsStats INTEGER,
mplsVpwsRowStatus RowStatus,
mplsVpwsState INTEGER
}
mplsVpwsVcId OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Layer-2 Virtual Circuit."
::= { mplsVpwsEntry 1 }
mplsVpwsVcName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifying string for MPLS Layer-2 Virtual Circuit.
Only 20 octets is accepted.."
::= { mplsVpwsEntry 2 }
mplsVpwsPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv4 Address for end-point for MPLS Layer-2 Virtual Circuit."
::= { mplsVpwsEntry 3 }
mplsVpwsIsManual OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is set , vc will be configured by manual.
1 means manual is set,2 means not."
::= { mplsVpwsEntry 4 }
mplsVpwsMtu OBJECT-TYPE
SYNTAX Integer32(576..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify l2-circuit mtu,l2-circuit mtu value <576-65535>"
::= { mplsVpwsEntry 5 }
mplsVpwsPwMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"PW raw/tagged mode.0 means default mode, 1 means raw,2 means tagged mode."
DEFVAL { 0 }
::= { mplsVpwsEntry 6 }
mplsVpwsControlWord OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set control word for mpls layer2 circuit. The meanings of the values are:
enable(1) - enable control word;
disable(2) - disable control word;"
DEFVAL { 2 }
::= { mplsVpwsEntry 7 }
mplsVpwsStats OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set statstics status for mpls layer2 circuit. The meanings of the values are:
enable(1) - enable statistics;
disable(2) - disable statistics;"
DEFVAL { 2 }
::= { mplsVpwsEntry 8 }
mplsVpwsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsVpwsEntry 15 }
mplsVpwsState OBJECT-TYPE
SYNTAX INTEGER {active(1),inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the mpls layer2 circuit. The meanings of the values are:
active(1) - the l2 circuit is active;
inactive(2) - the l2 circuit is inactive;"
::= { mplsVpwsEntry 16 }
-- mplsVpwsIngressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress packets number of mpls vpws."
-- ::= { mplsVpwsEntry 17 }
--
-- mplsVpwsIngressbytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress bytes number of mpls vpws."
-- ::= { mplsVpwsEntry 18 }
--
-- mplsVpwsEgressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress packets number of mpls vpws."
-- ::= { mplsVpwsEntry 19 }
--
-- mplsVpwsEgressBytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress bytes number of mpls vpws."
-- ::= { mplsVpwsEntry 20 }
mplsVpwsFibTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpwsFibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Layer-2 MPLS Virtual Circuit FIB entry."
::= { mpls 6 }
mplsVpwsFibEntry OBJECT-TYPE
SYNTAX MplsVpwsFibEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Layer-2 MPLS Virtual Circuit FIB entry."
INDEX { mplsVpwsFibVcId}
::= { mplsVpwsFibTable 1 }
MplsVpwsFibEntry ::=
SEQUENCE {
mplsVpwsFibVcId Unsigned32,
mplsVpwsFibInLabel Integer32,
mplsVpwsFibOutLabel Integer32,
mplsVpwsFibRowStatus RowStatus
}
mplsVpwsFibVcId OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual Circuit Identifier."
::= { mplsVpwsFibEntry 1 }
mplsVpwsFibInLabel OBJECT-TYPE
SYNTAX Integer32 (16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In-coming Label <16-1048575>."
::= { mplsVpwsFibEntry 2 }
mplsVpwsFibOutLabel OBJECT-TYPE
SYNTAX Integer32 (16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out-going Label <16-1048575>."
::= { mplsVpwsFibEntry 3 }
mplsVpwsFibRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsVpwsFibEntry 4 }
--mplsVplsVlanTable OBJECT-TYPE
-- SYNTAX OCTET STRING
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "This defines the minnum and maxnum of vlan id.The string must be 'min,max',
-- and '0,0' means set vpls vlan id range to default(0,0).
-- Minnum,maxnum must be between 2 and 4096."
-- ::= { mpls 7 }
mplsVplsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Instance of MPLS based Virtual Private Lan Service (VPLS)."
::= { mpls 8 }
mplsVplsEntry OBJECT-TYPE
SYNTAX MplsVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of mplsVplsTable."
INDEX { mplsVplsId }
::= { mplsVplsTable 1 }
MplsVplsEntry ::=
SEQUENCE {
mplsVplsId Unsigned32,
mplsVplsName OCTET STRING,
mplsVplsWhiteList INTEGER,
-- mplsVplsEtreeType INTEGER,
mplsVplsRowStatus RowStatus,
mplsVplsDescription OCTET STRING,
mplsVplsMtu Integer32,
mplsVplsMacLearning INTEGER,
mplsVplsMacLimitNum Unsigned32,
mplsVplsMacLimitAction INTEGER,
mplsVplsAllowFlooding INTEGER,
-- mplsVplsAllowUnknownUnicast INTEGER,
-- mplsVplsAllowMulticast INTEGER,
mplsVplsState INTEGER
-- mplsVplsMPeerR Integer32,
-- mplsVplsMPeerT Integer32,
-- mplsVplsSPeer Integer32
}
mplsVplsId OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsEntry 1 }
mplsVplsName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifying string for VPLS."
::= { mplsVplsEntry 2 }
-- mplsVplsEtreeType OBJECT-TYPE
-- SYNTAX INTEGER {root(1),leaf(2)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Specify the E-tree type the VSI is emulating. The meanings of the values are:
-- root(1) - All AC in the VSI on this node will be root-ACs;
-- leaf(2) - All AC in the VSI on this node will be leaf-ACs;"
-- DEFVAL { 1 }
-- ::= { mplsVplsEntry 3 }
mplsVplsWhiteList OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set whitelist for the MPLS VPLS. The meanings of the values are:
enable(1) - Enable whitelist mode;
disable(2) - Disable whitelist mode;;"
DEFVAL { 2 }
::= { mplsVplsEntry 5 }
mplsVplsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsVplsEntry 10 }
mplsVplsDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing this VPLS instance.Only less than 20 octets is accepted."
::= { mplsVplsEntry 11 }
mplsVplsMtu OBJECT-TYPE
SYNTAX Integer32 (576..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mtu value of a vpls instance ."
::= { mplsVplsEntry 12 }
mplsVplsMacLearning OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set mac learning for the MPLS VPLS. The meanings of the values are:
enable(1) - Enable mac learning;
disable(2) - Disable mac learning;"
DEFVAL { 1 }
::= { mplsVplsEntry 13 }
mplsVplsMacLimitNum OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum fdb number of the MPLS VPLS."
::= { mplsVplsEntry 14 }
mplsVplsMacLimitAction OBJECT-TYPE
SYNTAX INTEGER {default(1),warn(2), discard(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set warning log when learning is disabled. The meanings of the values are:
default(1) - farward packets with mac learning disable;
warn(2) - warning log and discard packets;
discard(3) - discard packets."
DEFVAL { 1 }
::= { mplsVplsEntry 15 }
mplsVplsAllowFlooding OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set flooding broadcast, multicast and unicast packets. The meanings of the values are:
enable(1) - Enable flooding unknown unicast;
disable(2) - Disable flooding unknown unicast;"
DEFVAL { 1 }
::= { mplsVplsEntry 16 }
--mplsVplsAllowUnknownUnicast OBJECT-TYPE
-- SYNTAX INTEGER {enable(1),disable(2)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Set flooding unknown unicast packets. The meanings of the values are:
-- enable(1) - Enable flooding unknown unicast;
-- disable(2) - Disable flooding unknown unicast;"
-- DEFVAL { 1 }
-- ::= { mplsVplsEntry 17 }
--
--mplsVplsAllowMulticast OBJECT-TYPE
-- SYNTAX INTEGER {enable(1),disable(2)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Set flooding multicast packets. The meanings of the values are:
-- enable(1) - Enable flooding multicast;
-- disable(2) - Disable flooding multicast;"
-- DEFVAL { 1 }
-- ::= { mplsVplsEntry 18 }
mplsVplsState OBJECT-TYPE
SYNTAX INTEGER {active(1),inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS instance state. The meanings of the values are:
active(1) - VPLS instance is active;
inactive(2) - VPLS instance is inactive;"
::= { mplsVplsEntry 20 }
-- mplsVplsRawMeshPeerNum OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates the number the vpls raw mesh peers."
-- ::= { mplsVplsEntry 21 }
--
-- mplsVplsTaggedMeshPeerNum OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates the number the vpls tagged mesh peer."
-- ::= { mplsVplsEntry 22 }
--
-- mplsVplsSpokePeerNum OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates the number the vpls spoke peers."
-- ::= { mplsVplsEntry 23 }
mplsVplsPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peers to VPLS domains."
::= { mpls 9 }
mplsVplsPeerEntry OBJECT-TYPE
SYNTAX MplsVplsPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsPeerTable."
INDEX { mplsVplsPeerVplsId, mplsVplsPeerPeerAddr}
::= { mplsVplsPeerTable 1 }
MplsVplsPeerEntry ::=
SEQUENCE {
mplsVplsPeerVplsId Unsigned32,
mplsVplsPeerPeerAddr IpAddress,
mplsVplsPeerType Integer32,
mplsVplsPeerIsManul Integer32,
mplsVplsPeerControlWord INTEGER,
mplsVplsPeerStats INTEGER,
mplsVplsPeerPEType INTEGER,
mplsVplsPeerRowStatus RowStatus,
mplsVplsPeerState INTEGER
}
mplsVplsPeerVplsId OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsPeerEntry 1 }
mplsVplsPeerPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of the peer node to be added."
::= { mplsVplsPeerEntry 2 }
mplsVplsPeerType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set 1, if Peer Virtual Circuits type is Raw mode;
Set 2, if Peer Virtual Circuits type is Tagged mode."
::= { mplsVplsPeerEntry 3 }
mplsVplsPeerIsManul OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"No signaling is used to set-up the Virtual Circuit.
1 means manual is set, 2 means not."
::= { mplsVplsPeerEntry 4 }
mplsVplsPeerControlWord OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set control word for mpls vpls peer. The meanings of the values are:
enable(1) - enable control word;
disable(2) - disable control word;"
DEFVAL { 2 }
::= { mplsVplsPeerEntry 5 }
mplsVplsPeerStats OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set statistics for mpls vpls peer. The meanings of the values are:
enable(1) - enable statistics;
disable(2) - disable statistics;"
DEFVAL { 2 }
::= { mplsVplsPeerEntry 6 }
mplsVplsPeerPEType OBJECT-TYPE
SYNTAX INTEGER {spe(1),upe(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set PW type for mpls vpls peer. The meanings of the values are:
spe(1) - Superstarum PE;
upe(2) - Underlayer PE;"
DEFVAL { 1 }
::= { mplsVplsPeerEntry 7 }
mplsVplsPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsVplsPeerEntry 15 }
mplsVplsPeerState OBJECT-TYPE
SYNTAX INTEGER {up(1),down(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of mpls vpls peer. The meanings of the values are:
up(1) - the vpls peer is up;
down(2) - the vpls peer is down;"
DEFVAL { 2 }
::= { mplsVplsPeerEntry 16 }
-- mplsVplsPeerIngressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress packets number of mpls vpls peer."
-- ::= { mplsVplsPeerEntry 17 }
--
-- mplsVplsPeerIngressbytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress bytes number of mpls vpls peer."
-- ::= { mplsVplsPeerEntry 18 }
--
-- mplsVplsPeerEgressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress packets number of mpls vpls peer."
-- ::= { mplsVplsPeerEntry 19 }
--
-- mplsVplsPeerEgressBytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress bytes number of mpls vpls peer."
-- ::= { mplsVplsPeerEntry 20 }
mplsVplsFibAddTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsFibAddEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vpls fib table."
::= { mpls 10 }
mplsVplsFibAddEntry OBJECT-TYPE
SYNTAX MplsVplsFibAddEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPLS Fib entrys."
INDEX { mplsVplsFibAddVplsId, mplsVplsFibAddPeerAddr}
::= { mplsVplsFibAddTable 1 }
MplsVplsFibAddEntry ::=
SEQUENCE {
mplsVplsFibAddVplsId Integer32,
mplsVplsFibAddPeerAddr IpAddress,
mplsVplsFibAddInLabel Integer32,
mplsVplsFibAddOutLabel Integer32,
mplsVplsFibAddRowStatus RowStatus
}
mplsVplsFibAddVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsFibAddEntry 1 }
mplsVplsFibAddPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mesh Peer IPv4 Address."
::= { mplsVplsFibAddEntry 2 }
mplsVplsFibAddInLabel OBJECT-TYPE
SYNTAX Integer32(16..2063)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In-coming Label <16-2063>."
::= { mplsVplsFibAddEntry 3 }
mplsVplsFibAddOutLabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out-going Label <16-1048575>."
::= { mplsVplsFibAddEntry 4 }
mplsVplsFibAddRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsVplsFibAddEntry 5 }
mplsInterfaceMplsVpwsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInterfaceMplsVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One MPLS layer-2 virtual circuit can only band to one interface,
but one interface may be banded to many VCs."
::= { mpls 11 }
mplsInterfaceMplsVpwsEntry OBJECT-TYPE
SYNTAX MplsInterfaceMplsVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsInterfaceMplsVpwsTable."
INDEX { mplsInterfaceMplsVpwsIfIndex, mplsInterfaceMplsVpwsVcName, mplsInterfaceMplsVpwsVlanId}
::= { mplsInterfaceMplsVpwsTable 1 }
MplsInterfaceMplsVpwsEntry ::=
SEQUENCE {
mplsInterfaceMplsVpwsIfIndex Integer32,
mplsInterfaceMplsVpwsVcName OCTET STRING,
mplsInterfaceMplsVpwsVlanId Integer32,
mplsInterfaceMplsVpwsBundling INTEGER,
mplsInterfaceMplsVpwsStatisticEn INTEGER,
mplsInterfaceMplsVpwsReplaceDscp INTEGER,
mplsInterfaceMplsVpwsReplaceCos INTEGER,
mplsInterfaceMplsVpwsVlanOperation OCTET STRING,
mplsInterfaceMplsVpwsRowStatus RowStatus
}
mplsInterfaceMplsVpwsIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { mplsInterfaceMplsVpwsEntry 1 }
mplsInterfaceMplsVpwsVcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying string for MPLS layer-2 virtual circuit."
::= { mplsInterfaceMplsVpwsEntry 2 }
mplsInterfaceMplsVpwsVlanId OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vlan identifier."
::= { mplsInterfaceMplsVpwsEntry 3 }
mplsInterfaceMplsVpwsBundling OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of bundling."
DEFVAL { disable }
::= { mplsInterfaceMplsVpwsEntry 4 }
mplsInterfaceMplsVpwsStatisticEn OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of statistic enable."
DEFVAL { disable }
::= { mplsInterfaceMplsVpwsEntry 5 }
mplsInterfaceMplsVpwsReplaceDscp OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of replace dscp enable."
DEFVAL { disable }
::= { mplsInterfaceMplsVpwsEntry 6 }
mplsInterfaceMplsVpwsReplaceCos OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of replace cos enable."
DEFVAL { disable }
::= { mplsInterfaceMplsVpwsEntry 7 }
mplsInterfaceMplsVpwsVlanOperation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifying vlan operation table name for MPLS layer-2 virtual circuit."
::= { mplsInterfaceMplsVpwsEntry 8 }
mplsInterfaceMplsVpwsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsInterfaceMplsVpwsEntry 10 }
mplsInterfacePropertyTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInterfacePropertyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface property table.Including label-switching and configuration of MPLS-TP P2P MAC."
::= { mpls 12 }
mplsInterfacePropertyEntry OBJECT-TYPE
SYNTAX MplsInterfacePropertyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration of interface label-switching and MPLS-TP P2P MAC."
INDEX { mplsInterfacePropertyIfIndex}
::= { mplsInterfacePropertyTable 1 }
MplsInterfacePropertyEntry ::=
SEQUENCE {
mplsInterfacePropertyIfIndex Integer32,
mplsInterfaceLabelSwitching INTEGER,
mplsInterfaceTPP2PTxMac MacAddress,
mplsInterfaceCRCNumberThresholdRising OCTET STRING,
mplsInterfaceCRCNumberThresholdFalling OCTET STRING,
mplsInterfaceCRCRateThresholdRising Integer32,
mplsInterfaceCRCRateThresholdFalling Integer32,
mplsInterfaceCRCAlarmStatus INTEGER
}
mplsInterfacePropertyIfIndex OBJECT-TYPE
SYNTAX Integer32(2..48)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { mplsInterfacePropertyEntry 1 }
mplsInterfaceLabelSwitching OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set label-switching of the interface. This node is
valid when the interface is a routed interface.
The meanings of the values are:
enable(1) - Enable label-switching;
disable(2) - Disable label-switching;"
DEFVAL { 2 }
::= { mplsInterfacePropertyEntry 4 }
mplsInterfaceTPP2PTxMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit mac address for mpls-tp non-ip system."
::= { mplsInterfacePropertyEntry 5 }
mplsInterfaceCRCNumberThresholdRising OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rising threshold for CRC error number."
::= { mplsInterfacePropertyEntry 6 }
mplsInterfaceCRCNumberThresholdFalling OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Falling threshold for CRC error number."
::= { mplsInterfacePropertyEntry 7 }
mplsInterfaceCRCRateThresholdRising OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rising threshold for CRC error rate."
::= { mplsInterfacePropertyEntry 8 }
mplsInterfaceCRCRateThresholdFalling OBJECT-TYPE
SYNTAX Integer32(0..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Falling threshold for CRC error rate."
::= { mplsInterfacePropertyEntry 9 }
mplsInterfaceCRCAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {active(1),inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface CRC alarm status."
::= { mplsInterfacePropertyEntry 10 }
mplsInterfaceMplsVplsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInterfaceMplsVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of relationship of Vpls instance and interface."
::= { mpls 13 }
mplsInterfaceMplsVplsEntry OBJECT-TYPE
SYNTAX MplsInterfaceMplsVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsInterfaceMplsVplsTable."
INDEX { mplsInterfaceMplsVplsIfIndex, mplsInterfaceMplsVplsVplsName, mplsInterfaceMplsVplsVlanId}
::= { mplsInterfaceMplsVplsTable 1 }
MplsInterfaceMplsVplsEntry ::=
SEQUENCE {
mplsInterfaceMplsVplsIfIndex Integer32,
mplsInterfaceMplsVplsVplsName OCTET STRING,
mplsInterfaceMplsVplsVlanId Integer32,
mplsInterfaceMplsVplsBundling INTEGER,
mplsInterfaceMplsVplsStatisticEn INTEGER,
mplsInterfaceMplsVplsETreeACType INTEGER,
mplsInterfaceMplsVplsReplaceDscp INTEGER,
mplsInterfaceMplsVplsReplaceCos INTEGER,
mplsInterfaceMplsVplsVlanOperation OCTET STRING,
mplsInterfaceMplsVplsRowStatus RowStatus
}
mplsInterfaceMplsVplsIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { mplsInterfaceMplsVplsEntry 1 }
mplsInterfaceMplsVplsVplsName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for vlan."
::= { mplsInterfaceMplsVplsEntry 2 }
mplsInterfaceMplsVplsVlanId OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for vlan.."
::= { mplsInterfaceMplsVplsEntry 3 }
mplsInterfaceMplsVplsBundling OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of bundling."
DEFVAL { disable }
::= { mplsInterfaceMplsVplsEntry 4 }
mplsInterfaceMplsVplsStatisticEn OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of statistics enable."
DEFVAL { disable }
::= { mplsInterfaceMplsVplsEntry 5 }
mplsInterfaceMplsVplsETreeACType OBJECT-TYPE
SYNTAX INTEGER {leaf(1), root(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Etree AC type."
DEFVAL { root }
::= { mplsInterfaceMplsVplsEntry 6 }
mplsInterfaceMplsVplsReplaceDscp OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of replace dscp."
DEFVAL { disable }
::= { mplsInterfaceMplsVplsEntry 7 }
mplsInterfaceMplsVplsReplaceCos OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of replace cos enable."
DEFVAL { disable }
::= { mplsInterfaceMplsVplsEntry 8 }
mplsInterfaceMplsVplsVlanOperation OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifying vlan operation table name."
::= { mplsInterfaceMplsVplsEntry 9 }
mplsInterfaceMplsVplsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsInterfaceMplsVplsEntry 10 }
mplsLspPeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all mpls lsp-pe instances."
::= { mpls 14 }
mplsLspPeEntry OBJECT-TYPE
SYNTAX MplsLspPeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspPeTable."
INDEX { mplsLspPeName}
::= { mplsLspPeTable 1 }
MplsLspPeEntry ::=
SEQUENCE {
mplsLspPeName OCTET STRING,
mplsLspPeRowStatus RowStatus,
mplsLspPeState INTEGER,
mplsLspPeDescription OCTET STRING,
mplsLspPeOAMMegLevel Integer32,
mplsLspPeOAMMegId OCTET STRING,
mplsLspPeOAMMegIdIcc Integer32,
mplsLspPeOAMMepId Integer32,
mplsLspPeOAMMepInterval INTEGER,
mplsLspPeOAMMepExp Integer32,
mplsLspPeOAMRMepId Integer32,
mplsLspPeOAMCCState INTEGER,
mplsLspPeOAMEventCacheSize Integer32,
mplsLspPeOAM1dmCacheSize Integer32,
mplsLspPeOAMAisInterval Integer32,
mplsLspPeOAMAisClientSupress INTEGER,
mplsLspPeOAMLckInterval Integer32,
mplsLspPeOAMLck INTEGER,
mplsLspPeOAMEvtLOC INTEGER,
mplsLspPeOAMEvtUMP INTEGER,
mplsLspPeOAMEvtUIN INTEGER,
mplsLspPeOAMEvtUMG INTEGER,
mplsLspPeOAMEvtULV INTEGER,
mplsLspPeOAMEvtW1ST INTEGER,
mplsLspPeOAMEvtRDIR INTEGER,
mplsLspPeOAMEvtRDIT INTEGER,
mplsLspPeOAMEvtAISR INTEGER,
mplsLspPeOAMEvtAIST INTEGER,
mplsLspPeOAMEvtAISD INTEGER,
mplsLspPeOAMEvtLCKR INTEGER,
mplsLspPeOAMEvtLCKT INTEGER,
mplsLspPeOAMEvtLCKD INTEGER,
mplsLspPeOAMLckTxEnable INTEGER,
mplsLspPeOAMEvtCRC INTEGER,
mplsLspPeOAMState INTEGER,
mplsLspPeIngressPkts Counter64,
mplsLspPeIngressBytes Counter64,
mplsLspPeEgressPkts Counter64,
mplsLspPeEgressBytes Counter64,
mplsLspPeStats INTEGER,
mplsLspPeBandwidth Integer32,
mplsLspPeOAMLmDualExp Integer32,
mplsLspPeOAMLmDualStatInterval Integer32,
mplsLspPeOAMLmDualCacheSize Integer32,
mplsLspPeOAMLmSingleExp Integer32,
mplsLspPeOAMLmSingleInterval INTEGER,
mplsLspPeOAMLmSingleCacheSize Integer32,
mplsLspPeOAMLmEnableState INTEGER,
mplsLspPeOAMLmLocalLossThreshold Integer32,
mplsLspPeOAMLmRemoteLossThreshold Integer32,
mplsLspPeOAMLmSingleRxCount Integer32,
mplsLspPeOAMLmSingleTxCount Integer32,
mplsLspPeOAMLmSingleSuccessRate Integer32,
mplsLspPeOAMLmSingleStartTime OCTET STRING,
mplsLspPeOAMLmSingleEndTime OCTET STRING
}
mplsLspPeName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Lsp-pe."
::= { mplsLspPeEntry 1 }
mplsLspPeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsLspPeEntry 10 }
mplsLspPeState OBJECT-TYPE
SYNTAX INTEGER {active(1),inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the lsp-pe. The meanings of the values are:
active(1) - the lsp-pe is active;
inactive(2) - the lsp-pe is inactive;"
::= { mplsLspPeEntry 11 }
mplsLspPeDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this pe type LSP.
Only less than 20 octets is accepted."
::= { mplsLspPeEntry 12 }
mplsLspPeOAMMegLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OAM level."
DEFVAL { 7 }
::= { mplsLspPeEntry 20 }
mplsLspPeOAMMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEG ID of the lsp-pe."
::= { mplsLspPeEntry 21 }
mplsLspPeOAMMegIdIcc OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ICC length of MEG ID."
DEFVAL { 6 }
::= { mplsLspPeEntry 22 }
mplsLspPeOAMMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEP ID."
::= { mplsLspPeEntry 23 }
mplsLspPeOAMMepInterval OBJECT-TYPE
SYNTAX INTEGER
{
three-point-three-ms(1),
ten-ms(2),
one-hundred-ms(3),
one-sec(4),
ten-sec(5),
one-min(6),
ten-min(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEP Interval."
::= { mplsLspPeEntry 24 }
mplsLspPeOAMMepExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EXP value, default is 7."
DEFVAL { 7 }
::= { mplsLspPeEntry 25 }
mplsLspPeOAMRMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP ID."
::= { mplsLspPeEntry 26 }
mplsLspPeOAMCCState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CC state."
DEFVAL { disable }
::= { mplsLspPeEntry 27 }
mplsLspPeOAMEventCacheSize OBJECT-TYPE
SYNTAX Integer32 (8..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Event entry cache size."
DEFVAL { 8 }
::= { mplsLspPeEntry 28 }
mplsLspPeOAM1dmCacheSize OBJECT-TYPE
SYNTAX Integer32 (8..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1dm entry cache size."
DEFVAL { 8 }
::= { mplsLspPeEntry 29 }
mplsLspPeOAMAisInterval OBJECT-TYPE
SYNTAX Integer32 (0|1|60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of AIS PDU.
0:no oam-y1731 ais server enable."
::= { mplsLspPeEntry 30 }
mplsLspPeOAMAisClientSupress OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AIS client supress state."
DEFVAL { disable }
::= { mplsLspPeEntry 31 }
mplsLspPeOAMLckInterval OBJECT-TYPE
SYNTAX Integer32 (0|1|60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lsp-pe lock interval.
0:no oam-y1731 lck server enable."
DEFVAL { 0 }
::= { mplsLspPeEntry 32 }
mplsLspPeOAMLck OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lck state."
DEFVAL { disable }
::= { mplsLspPeEntry 33 }
mplsLspPeOAMEvtLOC OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loc state."
DEFVAL { disable }
::= { mplsLspPeEntry 34 }
mplsLspPeOAMEvtUMP OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp RMEPID state."
DEFVAL { disable }
::= { mplsLspPeEntry 35 }
mplsLspPeOAMEvtUIN OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp interval state."
DEFVAL { disable }
::= { mplsLspPeEntry 36 }
mplsLspPeOAMEvtUMG OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp MEGID state."
DEFVAL { disable }
::= { mplsLspPeEntry 37 }
mplsLspPeOAMEvtULV OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp Level state."
DEFVAL { disable }
::= { mplsLspPeEntry 38 }
mplsLspPeOAMEvtW1ST OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wait 1st CCM state."
DEFVAL { disable }
::= { mplsLspPeEntry 39 }
mplsLspPeOAMEvtRDIR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDI RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 40 }
mplsLspPeOAMEvtRDIT OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDI TX state."
DEFVAL { disable }
::= { mplsLspPeEntry 41 }
mplsLspPeOAMEvtAISR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 42 }
mplsLspPeOAMEvtAIST OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 43 }
mplsLspPeOAMEvtAISD OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 44 }
mplsLspPeOAMEvtLCKR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 45 }
mplsLspPeOAMEvtLCKT OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 46 }
mplsLspPeOAMEvtLCKD OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 47 }
mplsLspPeOAMLckTxEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"oam-y1731 lck server enable."
DEFVAL { 2 }
::= { mplsLspPeEntry 48 }
mplsLspPeOAMEvtCRC OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CRC RX state."
DEFVAL { disable }
::= { mplsLspPeEntry 49 }
mplsLspPeOAMState OBJECT-TYPE
SYNTAX INTEGER {init(0), fail(1), ok(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"oam-y1731 Rmep state."
::= { mplsLspPeEntry 50 }
mplsLspPeIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packtes number of lsp-pe."
::= { mplsLspPeEntry 51 }
mplsLspPeIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of lsp-pe."
::= { mplsLspPeEntry 52 }
mplsLspPeEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packtes number of lsp-pe."
::= { mplsLspPeEntry 53 }
mplsLspPeEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of lsp-pe."
::= { mplsLspPeEntry 54 }
mplsLspPeStats OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"statistics enable."
DEFVAL { disable }
::= { mplsLspPeEntry 55 }
mplsLspPeBandwidth OBJECT-TYPE
SYNTAX Integer32 (-1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"lsp-pe bandwidth in kbps. -1 means no limitation"
::= { mplsLspPeEntry 56 }
mplsLspPeOAMLmDualExp OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment packets with specified exp will be counted.
<0-7> specified exp; 8 means Packets with different exp will be counted separately;
9 means All packets with different exp will be counted together."
::= { mplsLspPeEntry 61 }
mplsLspPeOAMLmDualStatInterval OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment interval value."
DEFVAL { 1 }
::= { mplsLspPeEntry 62 }
mplsLspPeOAMLmDualCacheSize OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment cache size."
DEFVAL { 128 }
::= { mplsLspPeEntry 63 }
mplsLspPeOAMLmSingleExp OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure single-ended loss measurment packets with specified exp will be counted.
<0-7> specified exp; 8 means Packets with different exp will be counted separately;
9 means All packets with different exp will be counted together."
::= { mplsLspPeEntry 66 }
mplsLspPeOAMLmSingleInterval OBJECT-TYPE
SYNTAX INTEGER
{
one-hundred-ms(1),
one-sec(2),
ten-sec(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Interval."
::= { mplsLspPeEntry 67 }
mplsLspPeOAMLmSingleCacheSize OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure single-ended loss measurment cache size."
DEFVAL { 128 }
::= { mplsLspPeEntry 68 }
mplsLspPeOAMLmEnableState OBJECT-TYPE
SYNTAX INTEGER {enable-dual(1), enable-single(2), disable(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable oam-y1731 loss measurment."
DEFVAL { disable }
::= { mplsLspPeEntry 70 }
mplsLspPeOAMLmLocalLossThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local packet loss percentage, 0 means threshold not enabled."
DEFVAL { 0 }
::= { mplsLspPeEntry 71 }
mplsLspPeOAMLmRemoteLossThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local packet loss percentage, 0 means threshold not enabled."
DEFVAL { 0 }
::= { mplsLspPeEntry 72 }
mplsLspPeOAMLmSingleRxCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended packet Rx count."
::= { mplsLspPeEntry 73 }
mplsLspPeOAMLmSingleTxCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended packet Tx count."
::= { mplsLspPeEntry 74 }
mplsLspPeOAMLmSingleSuccessRate OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended success rate."
::= { mplsLspPeEntry 75 }
mplsLspPeOAMLmSingleStartTime OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM proactive single-ended start time."
::= { mplsLspPeEntry 76 }
mplsLspPeOAMLmSingleEndTime OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM proactive single-ended end time."
::= { mplsLspPeEntry 77 }
mplsLspPeIngressTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPeIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls lsp-pe ingress configure."
::= { mpls 15 }
mplsLspPeIngressEntry OBJECT-TYPE
SYNTAX MplsLspPeIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspPeIngressTable."
INDEX { mplsLspPeIngressLspName }
::= { mplsLspPeIngressTable 1 }
MplsLspPeIngressEntry ::=
SEQUENCE {
mplsLspPeIngressLspName OCTET STRING,
mplsLspPeIngressInlabel Integer32,
mplsLspPeIngressRowStatus RowStatus
}
mplsLspPeIngressLspName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Lsp-pe."
::= { mplsLspPeIngressEntry 1 }
mplsLspPeIngressInlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Incoming label of the Lsp-pe."
::= { mplsLspPeIngressEntry 2 }
mplsLspPeIngressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsLspPeIngressEntry 10 }
mplsLspPeEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPeEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls lsp-pe egress configure."
::= { mpls 16 }
mplsLspPeEgressEntry OBJECT-TYPE
SYNTAX MplsLspPeEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of mplsLspPeEgressTable."
INDEX { mplsLspPeEgressLspName }
::= { mplsLspPeEgressTable 1 }
MplsLspPeEgressEntry ::=
SEQUENCE {
mplsLspPeEgressLspName OCTET STRING,
mplsLspPeEgressOutlabel Integer32,
mplsLspPeEgressNextHop IpAddress,
mplsLspPeEgressOutIfindex Integer32,
mplsLspPeEgressOutMemIfindex Integer32,
mplsLspPeEgressRowStatus RowStatus
}
mplsLspPeEgressLspName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Lsp-pe."
::= { mplsLspPeEgressEntry 1 }
mplsLspPeEgressOutlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing label of the Lsp-pe."
::= { mplsLspPeEgressEntry 2 }
mplsLspPeEgressNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Nexthop Address(IPV4) for the Lsp-pe. Out-going
interface and nexthop ip address can not be configured
at the same time."
::= { mplsLspPeEgressEntry 3 }
mplsLspPeEgressOutIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing interface for the Lsp-pe. Out-going
interface and nexthop ip address can not be configured
at the same time."
::= { mplsLspPeEgressEntry 4 }
mplsLspPeEgressOutMemIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Member port index, this field is required only when
out-going interface is vlan interface."
::= { mplsLspPeEgressEntry 5 }
mplsLspPeEgressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsLspPeEgressEntry 10 }
mplsLspPTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all mpls lsp-p instances."
::= { mpls 17 }
mplsLspPEntry OBJECT-TYPE
SYNTAX MplsLspPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspPTable."
INDEX { mplsLspPName}
::= { mplsLspPTable 1 }
MplsLspPEntry ::=
SEQUENCE {
mplsLspPName OCTET STRING,
mplsLspPRowStatus RowStatus,
mplsLspPOAMMegId OCTET STRING,
mplsLspPOAMMegIdIcc Integer32,
mplsLspPOAMMipState INTEGER,
mplsLspPOAMMegLevel Integer32,
mplsLspPDescription OCTET STRING,
mplsLspPStats INTEGER
}
mplsLspPName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Lsp-p."
::= { mplsLspPEntry 1 }
mplsLspPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsLspPEntry 10 }
mplsLspPOAMMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEG ID of the lsp-p."
::= { mplsLspPEntry 11 }
mplsLspPOAMMegIdIcc OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ICC length of MEG ID."
DEFVAL { 6 }
::= { mplsLspPEntry 12 }
mplsLspPOAMMipState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MIP state of the lsp."
DEFVAL { disable }
::= { mplsLspPEntry 13 }
mplsLspPOAMMegLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OAM level."
DEFVAL { 7 }
::= { mplsLspPEntry 14 }
mplsLspPDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this p type LSP.
Only less than 20 octets is accepted."
::= { mplsLspPEntry 15 }
mplsLspPStats OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set statistics for mpls lsp-p. The meanings of the values are:
enable(1) - enable statistics;
disable(2) - disable statistics;"
DEFVAL { 2 }
::= { mplsLspPEntry 16 }
mplsLspPEastTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPEastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of east configuration of all mpls lsp-p instances."
::= { mpls 18 }
mplsLspPEastEntry OBJECT-TYPE
SYNTAX MplsLspPEastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspPfEastTable."
INDEX { mplsLspPEastLspName}
::= { mplsLspPEastTable 1 }
MplsLspPEastEntry ::=
SEQUENCE {
mplsLspPEastLspName OCTET STRING,
mplsLspPEastInlabel Integer32,
mplsLspPEastOutlabel Integer32,
mplsLspPEastNextHop IpAddress,
mplsLspPEastTunnel OCTET STRING,
mplsLspPEastOutIfindex Integer32,
mplsLspPEastOutMemIfindex Integer32,
mplsLspPEastReplaceExp INTEGER,
mplsLspPEastRowStatus RowStatus,
mplsLspPEastState INTEGER,
mplsLspPEastIngressPkts Counter64,
mplsLspPEastIngressbytes Counter64,
mplsLspPEastEgressPkts Counter64,
mplsLspPEastEgressBytes Counter64
}
mplsLspPEastLspName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Lsp-p."
::= { mplsLspPEastEntry 1 }
mplsLspPEastInlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"East incoming label of the Lsp-p."
::= { mplsLspPEastEntry 2 }
mplsLspPEastOutlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"East outgoing label of the Lsp-p."
::= { mplsLspPEastEntry 3 }
mplsLspPEastNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"East nexthop Address(IPV4) for the Lsp-p."
::= { mplsLspPEastEntry 4 }
mplsLspPEastTunnel OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"East tunnel name."
::= { mplsLspPEastEntry 5 }
mplsLspPEastOutIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing interface for the Lsp-p. Out-going
interface , tunnel, and nexthop ip address
can not be configured at the same time."
::= { mplsLspPEastEntry 6 }
mplsLspPEastOutMemIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Member port index, this field is required only when
out-going interface is vlan interface."
::= { mplsLspPEastEntry 7 }
mplsLspPEastReplaceExp OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Replace exp."
::= { mplsLspPEastEntry 8 }
mplsLspPEastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsLspPEastEntry 10 }
mplsLspPEastState OBJECT-TYPE
SYNTAX INTEGER {active(1), inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the mpls lsp-p east. The meanings of the values are:
active(1) - active;
inactive(2) - inactive;"
::= { mplsLspPEastEntry 11 }
mplsLspPEastIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packets number of lsp-p east."
::= { mplsLspPEastEntry 20 }
mplsLspPEastIngressbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of lsp-p east."
::= { mplsLspPEastEntry 21 }
mplsLspPEastEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packets number of lsp-p east."
::= { mplsLspPEastEntry 22 }
mplsLspPEastEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of lsp-p east."
::= { mplsLspPEastEntry 23 }
mplsLspPWestTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPWestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of west configuration of all mpls lsp-p instances."
::= { mpls 19 }
mplsLspPWestEntry OBJECT-TYPE
SYNTAX MplsLspPWestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspPWestTable."
INDEX { mplsLspPWestLspName}
::= { mplsLspPWestTable 1 }
MplsLspPWestEntry ::=
SEQUENCE {
mplsLspPWestLspName OCTET STRING,
mplsLspPWestInlabel Integer32,
mplsLspPWestOutlabel Integer32,
mplsLspPWestNextHop IpAddress,
mplsLspPWestTunnel OCTET STRING,
mplsLspPWestOutIfindex Integer32,
mplsLspPWestOutMemIfindex Integer32,
mplsLspPWestReplaceExp INTEGER,
mplsLspPWestRowStatus RowStatus,
mplsLspPWestState INTEGER,
mplsLspPWestIngressPkts Counter64,
mplsLspPWestIngressbytes Counter64,
mplsLspPWestEgressPkts Counter64,
mplsLspPWestEgressBytes Counter64
}
mplsLspPWestLspName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Lsp-p."
::= { mplsLspPWestEntry 1 }
mplsLspPWestInlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"West incoming label of the Lsp-p."
::= { mplsLspPWestEntry 2 }
mplsLspPWestOutlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"West outgoing label of the Lsp-p."
::= { mplsLspPWestEntry 3 }
mplsLspPWestNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"West nexthop Address(IPV4) for the Lsp-p."
::= { mplsLspPWestEntry 4 }
mplsLspPWestTunnel OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"West tunnel name."
::= { mplsLspPWestEntry 5 }
mplsLspPWestOutIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing interface for the Lsp-p. Out-going
interface , tunnel, and nexthop ip address
can not be configured at the same time."
::= { mplsLspPWestEntry 6 }
mplsLspPWestOutMemIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Member port index, this field is required only when
out-going interface is vlan interface."
::= { mplsLspPWestEntry 7 }
mplsLspPWestReplaceExp OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Replace exp."
::= { mplsLspPWestEntry 8 }
mplsLspPWestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsLspPWestEntry 10 }
mplsLspPWestState OBJECT-TYPE
SYNTAX INTEGER {active(1), inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the mpls lsp-p west. The meanings of the values are:
active(1) - active;
inactive(2) - inactive;"
::= { mplsLspPWestEntry 11 }
mplsLspPWestIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packets number of lsp-p west."
::= { mplsLspPWestEntry 20 }
mplsLspPWestIngressbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of lsp-p west."
::= { mplsLspPWestEntry 21 }
mplsLspPWestEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packets number of lsp-p west."
::= { mplsLspPWestEntry 22 }
mplsLspPWestEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of lsp-p west."
::= { mplsLspPWestEntry 23 }
mplsTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all mpls tunnel instances."
::= { mpls 20 }
mplsTunnelEntry OBJECT-TYPE
SYNTAX MplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTunnelTable."
INDEX { mplsTunnelName}
::= { mplsTunnelTable 1 }
MplsTunnelEntry ::=
SEQUENCE {
mplsTunnelName OCTET STRING,
mplsTunnelApsType INTEGER,
mplsTunnelRowStatus RowStatus,
mplsTunnelPrimaryLspPe OCTET STRING,
mplsTunnelSecondaryLspPe OCTET STRING,
mplsTunnelDescription OCTET STRING,
mplsTunnelSelectedLspPe OCTET STRING,
mplsTunnelG8131Mode INTEGER,
mplsTunnelG8131WTRTimer Integer32,
mplsTunnelG8131HoldOffTimer Integer32,
mplsTunnelG8131Action INTEGER,
mplsTunnelG8131WorkingLSP OCTET STRING,
mplsTunnelG8131ProtectionLSP OCTET STRING,
mplsTunnelG8131ActivePath INTEGER,
mplsTunnelG8131WTRTimeLeft Integer32,
mplsTunnelG8131HoldOffTimeLeft Integer32,
mplsTunnelG8131DFOPState INTEGER,
mplsTunnelG8131CurrentState INTEGER,
mplsTunnelG8131LastState INTEGER,
mplsTunnelG8131CurrentEvent INTEGER,
mplsTunnelG8131FarEndLastEvent INTEGER,
mplsTunnelG8131RequestSignal INTEGER
}
mplsTunnelName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for mpls tunnel."
::= { mplsTunnelEntry 1 }
mplsTunnelApsType OBJECT-TYPE
SYNTAX INTEGER { aps(1), non-aps(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"APS type for the tunnel."
::= { mplsTunnelEntry 2 }
mplsTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsTunnelEntry 10 }
mplsTunnelPrimaryLspPe OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary lsp-pe name of the mpls tunnel."
::= { mplsTunnelEntry 11 }
mplsTunnelSecondaryLspPe OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary lsp-pe name of the mpls tunnel."
::= { mplsTunnelEntry 12 }
mplsTunnelDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this MPLS tunnel.
Only less than 20 octets is accepted."
::= { mplsTunnelEntry 13 }
mplsTunnelSelectedLspPe OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected lsp-pe name of the mpls tunnel."
::= { mplsTunnelEntry 25 }
mplsTunnelG8131Mode OBJECT-TYPE
SYNTAX INTEGER { revertive(1), non-revertive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 mode for the mpls tunnel."
::= { mplsTunnelEntry 30 }
mplsTunnelG8131WTRTimer OBJECT-TYPE
SYNTAX Integer32 (0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 wait-to-restore timer value for the mpls tunnel, in minutes."
DEFVAL {5}
::= { mplsTunnelEntry 31 }
mplsTunnelG8131HoldOffTimer OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 hold-off timer value for the mpls tunnel, steps of 100ms."
DEFVAL {0}
::= { mplsTunnelEntry 32 }
mplsTunnelG8131Action OBJECT-TYPE
SYNTAX INTEGER { force-switch(1), manual-swtich-to-working(2),
manual-switch-to-protection(3), lockout(4),
exercise(5), clear(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 actions for the mpls tunnel."
::= { mplsTunnelEntry 33 }
mplsTunnelG8131WorkingLSP OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 working lsp for the mpls tunnel."
::= { mplsTunnelEntry 40 }
mplsTunnelG8131ProtectionLSP OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 protection lsp for the mpls tunnel."
::= { mplsTunnelEntry 41 }
mplsTunnelG8131ActivePath OBJECT-TYPE
SYNTAX INTEGER { none(0), working-lsp(1), protection-lsp(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 active path for the mpls tunnel."
::= { mplsTunnelEntry 42 }
mplsTunnelG8131WTRTimeLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left time of G8131 wait-to-restore timer of the mpls tunnel."
::= { mplsTunnelEntry 43 }
mplsTunnelG8131HoldOffTimeLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left time of G8131 hold-off timer of the mpls tunnel."
::= { mplsTunnelEntry 44 }
mplsTunnelG8131DFOPState OBJECT-TYPE
SYNTAX INTEGER
{
not-in-defect-mode(1),
b-bit-mismatch-defect(2),
r-bit-mismatch-defect(3),
invalid-request-state(4),
aps-recv-on-working-entity(5),
aps-pdu-not-recv-after-state-change(6),
a-bit-mismatch-defect(7),
d-bit-mismatch-defect(8),
t-bit-mismatch-defect(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 DFOP state of the mpls tunnel."
::= { mplsTunnelEntry 45 }
mplsTunnelG8131CurrentState OBJECT-TYPE
SYNTAX INTEGER
{
no-request-working-active(0),
no-request-protection-avtive(1),
lockout-of-protection(2),
forced-switch(3),
signal-fail-on-working(4),
signal-fail-on-protection(5),
signal-degrade-on-working(6),
signal-degrade-on-protection(7),
manual-switch-to-protection(8),
manual-switch-to-working(9),
wait-to-restore(10),
do-not-revert(11),
exercise-on-working(12),
exercise-on-protection(13),
reverse-request-on-working(14),
reverse-request-on-protection(15),
none(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 current state of the mpls tunnel."
::= { mplsTunnelEntry 46 }
mplsTunnelG8131LastState OBJECT-TYPE
SYNTAX INTEGER
{
no-request-working-active(0),
no-request-protection-avtive(1),
lockout-of-protection(2),
forced-switch(3),
signal-fail-on-working(4),
signal-fail-on-protection(5),
signal-degrade-on-working(6),
signal-degrade-on-protection(7),
manual-switch-to-protection(8),
manual-switch-to-working(9),
wait-to-restore(10),
do-not-revert(11),
exercise-on-working(12),
exercise-on-protection(13),
reverse-request-on-working(14),
reverse-request-on-protection(15),
none(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 last state of the mpls tunnel."
::= { mplsTunnelEntry 47 }
mplsTunnelG8131CurrentEvent OBJECT-TYPE
SYNTAX INTEGER
{
local-lockout(0),
local-force-switch(1),
local-signal-fail-on-working(2),
local-working-recover-from-signal-fail(3),
local-signal-fail-on-protection(4),
local-protection-recover-from-signal-fail(5),
local-signal-degrade-on-working(6),
local-working-recover-from-signal-degrade(7),
local-signal-degrade-on-protection(8),
local-protection-recover-from-signal-degrade(9),
local-manual-switch-to-protection(10),
local-manual-switch-to-working(11),
local-clear(12),
local-exercise(13),
local-wtr-timer-expire(14),
remote-lockout(15),
remote-signal-fail-on-protection(16),
remote-force-switch(17),
remote-signal-fail-on-working(18),
remote-signal-degrade-on-working(19),
remote-signal-degrade-on-protection(20),
remote-manual-switch-to-protection(21),
remote-manual-switch-to-working(22),
remote-wait-to-restore(23),
remote-exercise-on-working(24),
remote-exercise-on-protection(25),
remote-reverse-request-on-working(26),
remote-reverse-request-on-protection(27),
remote-no-request-null(28),
remote-no-request-normal(29),
remote-do-not-revert(30),
none(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 current event of the mpls tunnel."
::= { mplsTunnelEntry 48 }
mplsTunnelG8131FarEndLastEvent OBJECT-TYPE
SYNTAX INTEGER
{
local-lockout(0),
local-force-switch(1),
local-signal-fail-on-working(2),
local-working-recover-from-signal-fail(3),
local-signal-fail-on-protection(4),
local-protection-recover-from-signal-fail(5),
local-signal-degrade-on-working(6),
local-working-recover-from-signal-degrade(7),
local-signal-degrade-on-protection(8),
local-protection-recover-from-signal-degrade(9),
local-manual-switch-to-protection(10),
local-manual-switch-to-working(11),
local-clear(12),
local-exercise(13),
local-wtr-timer-expire(14),
remote-lockout(15),
remote-signal-fail-on-protection(16),
remote-force-switch(17),
remote-signal-fail-on-working(18),
remote-signal-degrade-on-working(19),
remote-signal-degrade-on-protection(20),
remote-manual-switch-to-protection(21),
remote-manual-switch-to-working(22),
remote-wait-to-restore(23),
remote-exercise-on-working(24),
remote-exercise-on-protection(25),
remote-reverse-request-on-working(26),
remote-reverse-request-on-protection(27),
remote-no-request-null(28),
remote-no-request-normal(29),
remote-do-not-revert(30),
none(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 far end last event of the mpls tunnel."
::= { mplsTunnelEntry 49 }
mplsTunnelG8131RequestSignal OBJECT-TYPE
SYNTAX INTEGER { normal(1), null(2), none(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 request signal of the mpls tunnel."
::= { mplsTunnelEntry 50 }
mplsPwSPeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsPwSPeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all mpls pw s-pe instances."
::= { mpls 23 }
mplsPwSPeEntry OBJECT-TYPE
SYNTAX MplsPwSPeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsPwSPeTable."
INDEX { mplsPwSPeName }
::= { mplsPwSPeTable 1 }
MplsPwSPeEntry ::=
SEQUENCE {
mplsPwSPeName OCTET STRING,
mplsPwSPeRowStatus RowStatus,
mplsPwSPeOAMMegId OCTET STRING,
mplsPwSPeOAMMegIdIcc Integer32,
mplsPwSPeOAMMipState INTEGER,
mplsPwSPeOAMMegLevel Integer32,
mplsPwSPeDescription OCTET STRING,
mplsPwSpeStats INTEGER
}
mplsPwSPeName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS pw s-pe."
::= { mplsPwSPeEntry 1 }
mplsPwSPeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsPwSPeEntry 10 }
mplsPwSPeOAMMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEG ID of the pw spe."
::= { mplsPwSPeEntry 11 }
mplsPwSPeOAMMegIdIcc OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ICC length of MEG ID."
DEFVAL { 6 }
::= { mplsPwSPeEntry 12 }
mplsPwSPeOAMMipState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MIP state of the pw spe."
DEFVAL { disable }
::= { mplsPwSPeEntry 13 }
mplsPwSPeOAMMegLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OAM level."
DEFVAL { 7 }
::= { mplsPwSPeEntry 14 }
mplsPwSPeDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this S-PE type PW.
Only less than 20 octets is accepted."
::= { mplsPwSPeEntry 15 }
mplsPwSpeStats OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set statistics for mpls pw s-pe. The meanings of the values are:
enable(1) - enable statistics;
disable(2) - disable statistics;"
DEFVAL { 2 }
::= { mplsPwSPeEntry 16 }
mplsPwSPeEastTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsPwSPeEastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of east configuration of all mpls pw s-pe instances."
::= { mpls 24 }
mplsPwSPeEastEntry OBJECT-TYPE
SYNTAX MplsPwSPeEastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsPwSPeEastTable."
INDEX { mplsPwSPeEastPwName}
::= { mplsPwSPeEastTable 1 }
MplsPwSPeEastEntry ::=
SEQUENCE {
mplsPwSPeEastPwName OCTET STRING,
mplsPwSPeEastInlabel Integer32,
mplsPwSPeEastOutlabel Integer32,
mplsPwSPeEastTunnelName OCTET STRING,
mplsPwSPeEastCtrlWord INTEGER,
mplsPwSPeEastRowStatus RowStatus,
mplsPwSPeEastState INTEGER,
mplsPwSPeEastIngressPkts Counter64,
mplsPwSPeEastIngressbytes Counter64,
mplsPwSPeEastEgressPkts Counter64,
mplsPwSPeEastEgressBytes Counter64
}
mplsPwSPeEastPwName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS pw s-pe."
::= { mplsPwSPeEastEntry 1 }
mplsPwSPeEastInlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"East incoming label of the MPLS pw s-pe."
::= { mplsPwSPeEastEntry 2 }
mplsPwSPeEastOutlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"East outgoing label of the MPLS pw s-pe."
::= { mplsPwSPeEastEntry 3 }
mplsPwSPeEastTunnelName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPLS tunnel name for the MPLS pw s-pe."
::= { mplsPwSPeEastEntry 4 }
mplsPwSPeEastCtrlWord OBJECT-TYPE
SYNTAX INTEGER {control-word(1), no-control-word(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the mpls pw spe east control-word."
::= { mplsPwSPeEastEntry 5 }
mplsPwSPeEastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsPwSPeEastEntry 10 }
mplsPwSPeEastState OBJECT-TYPE
SYNTAX INTEGER {up(1), down(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the mpls pw spe east. The meanings of the values are:
up(1) - the state is up;
down(2) - the state is down;"
::= { mplsPwSPeEastEntry 11 }
mplsPwSPeEastIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packets number of pw s-pe east."
::= { mplsPwSPeEastEntry 20 }
mplsPwSPeEastIngressbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of pw s-pe east."
::= { mplsPwSPeEastEntry 21 }
mplsPwSPeEastEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packets number of pw s-pe east."
::= { mplsPwSPeEastEntry 22 }
mplsPwSPeEastEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of pw s-pe east."
::= { mplsPwSPeEastEntry 23 }
mplsPwSPeWestTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsPwSPeWestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of west configuration of all mpls pw s-pe instances."
::= { mpls 25 }
mplsPwSPeWestEntry OBJECT-TYPE
SYNTAX MplsPwSPeWestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsPwSPeWestTable."
INDEX { mplsPwSPeWestPwName}
::= { mplsPwSPeWestTable 1 }
MplsPwSPeWestEntry ::=
SEQUENCE {
mplsPwSPeWestPwName OCTET STRING,
mplsPwSPeWestInlabel Integer32,
mplsPwSPeWestOutlabel Integer32,
mplsPwSPeWestTunnelName OCTET STRING,
mplsPwSPeWestCtrlWord INTEGER,
mplsPwSPeWestRowStatus RowStatus,
mplsPwSPeWestState INTEGER,
mplsPwSPeWestIngressPkts Counter64,
mplsPwSPeWestIngressbytes Counter64,
mplsPwSPeWestEgressPkts Counter64,
mplsPwSPeWestEgressBytes Counter64
}
mplsPwSPeWestPwName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS pw s-pe."
::= { mplsPwSPeWestEntry 1 }
mplsPwSPeWestInlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"West incoming label of the MPLS pw s-pe."
::= { mplsPwSPeWestEntry 2 }
mplsPwSPeWestOutlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"West outgoing label of the MPLS pw s-pe."
::= { mplsPwSPeWestEntry 3 }
mplsPwSPeWestTunnelName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPLS tunnel name for the MPLS pw s-pe."
::= { mplsPwSPeWestEntry 4 }
mplsPwSPeWestCtrlWord OBJECT-TYPE
SYNTAX INTEGER {control-word(1), no-control-word(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the mpls pw spe west control-word."
::= { mplsPwSPeWestEntry 5 }
mplsPwSPeWestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsPwSPeWestEntry 10 }
mplsPwSPeWestState OBJECT-TYPE
SYNTAX INTEGER {up(1), down(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the mpls pw spe west. The meanings of the values are:
up(1) - the state is up;
down(2) - the state is down;"
::= { mplsPwSPeWestEntry 11 }
mplsPwSPeWestIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packets number of pw s-pe west."
::= { mplsPwSPeWestEntry 20 }
mplsPwSPeWestIngressbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of pw s-pe west."
::= { mplsPwSPeWestEntry 21 }
mplsPwSPeWestEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packets number of pw s-pe west."
::= { mplsPwSPeWestEntry 22 }
mplsPwSPeWestEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of pw s-pe west."
::= { mplsPwSPeWestEntry 23 }
mplsVplsStaticFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsStaticFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vpls static fdb table."
::= { mpls 26 }
mplsVplsStaticFdbEntry OBJECT-TYPE
SYNTAX MplsVplsStaticFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPLS static fdb entries."
INDEX { mplsVplsStaticFdbVplsId, mplsVplsStaticFdbMacAddr}
::= { mplsVplsStaticFdbTable 1 }
MplsVplsStaticFdbEntry ::=
SEQUENCE {
mplsVplsStaticFdbVplsId Integer32,
mplsVplsStaticFdbMacAddr MacAddress,
mplsVplsStaticFdbType INTEGER,
mplsVplsStaticFdbIfName OCTET STRING,
mplsVplsStaticFdbPeerIp IpAddress,
mplsVplsStaticFdbTPPeerName OCTET STRING,
mplsVplsStaticFdbRowStatus RowStatus
}
mplsVplsStaticFdbVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsStaticFdbEntry 1 }
mplsVplsStaticFdbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mac address of the fdb entry."
::= { mplsVplsStaticFdbEntry 2 }
mplsVplsStaticFdbType OBJECT-TYPE
SYNTAX INTEGER {forward(1),discard(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set static fdb type. When mplsVplsStaticFdbType is set to discard,
mplsVplsStaticFdbIfName and mplsVplsStaticFdbPeerIp are invalid.
The meanings of the values are:
forward(1) - Forwarding entry;
discard(2) - Discard entry;"
DEFVAL { discard }
::= { mplsVplsStaticFdbEntry 3 }
mplsVplsStaticFdbIfName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out-going interface of the VPLS fdb entry."
::= { mplsVplsStaticFdbEntry 4 }
mplsVplsStaticFdbPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out-going peer IPV4 address of the VPLS fdb entry."
::= { mplsVplsStaticFdbEntry 5 }
mplsVplsStaticFdbTPPeerName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out-going tp-peer of the VPLS fdb entry."
::= { mplsVplsStaticFdbEntry 6 }
mplsVplsStaticFdbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsVplsStaticFdbEntry 10 }
mplsStaticFtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsStaticFtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS static ftn table."
::= { mpls 27 }
mplsStaticFtnEntry OBJECT-TYPE
SYNTAX MplsStaticFtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS static ftn entries."
INDEX { mplsStaticFtnFecPrefix, mplsStaticFtnFecPrefixLen, mplsStaticFtnNexthop }
::= { mplsStaticFtnTable 1 }
MplsStaticFtnEntry ::=
SEQUENCE {
mplsStaticFtnFecPrefix IpAddress,
mplsStaticFtnFecPrefixLen Integer32,
mplsStaticFtnNexthop IpAddress,
mplsStaticFtnOutlabel Integer32,
mplsStaticFtnRowStatus RowStatus
}
mplsStaticFtnFecPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FEC prefix."
::= { mplsStaticFtnEntry 1 }
mplsStaticFtnFecPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FEC prefix length."
::= { mplsStaticFtnEntry 2 }
mplsStaticFtnNexthop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Nexthop IPV4 address of the FEC."
::= { mplsStaticFtnEntry 3 }
mplsStaticFtnOutlabel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out-going label for the FEC"
::= { mplsStaticFtnEntry 4 }
mplsStaticFtnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsStaticFtnEntry 10 }
mplsFtnDatabaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsFtnDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS ftn database table."
::= { mpls 28 }
mplsFtnDatabaseEntry OBJECT-TYPE
SYNTAX MplsFtnDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS ftn database entries."
INDEX { mplsFtnDatabaseIndex }
::= { mplsFtnDatabaseTable 1 }
MplsFtnDatabaseEntry ::=
SEQUENCE {
mplsFtnDatabaseIndex Integer32,
mplsFtnDatabaseFecPrefix IpAddress,
mplsFtnDatabaseFecPrefixLen Integer32,
mplsFtnDatabaseOutlabel Integer32,
mplsFtnDatabaseNexthop IpAddress,
mplsFtnDatabaseOutInterface OCTET STRING,
mplsFtnDatabaseState INTEGER
}
mplsFtnDatabaseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FEC prefix."
::= { mplsFtnDatabaseEntry 1 }
mplsFtnDatabaseFecPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FEC prefix."
::= { mplsFtnDatabaseEntry 2 }
mplsFtnDatabaseFecPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FEC prefix length."
::= { mplsFtnDatabaseEntry 3 }
mplsFtnDatabaseOutlabel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out-going label for the FEC"
::= { mplsFtnDatabaseEntry 4 }
mplsFtnDatabaseNexthop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nexthop IPV4 address of the FEC."
::= { mplsFtnDatabaseEntry 5 }
mplsFtnDatabaseOutInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out-going interface for the FEC."
::= { mplsFtnDatabaseEntry 6 }
mplsFtnDatabaseState OBJECT-TYPE
SYNTAX INTEGER {active(1),inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FTN entry.The meanings of the values are:
active(1) - the entry is active;
inactive(2) - the entry is inactive;"
::= { mplsFtnDatabaseEntry 7 }
mplsStaticIlmTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsStaticIlmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS static ilm table."
::= { mpls 29 }
mplsStaticIlmEntry OBJECT-TYPE
SYNTAX MplsStaticIlmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS static ilm entries."
INDEX { mplsStaticIlmInlabel }
::= { mplsStaticIlmTable 1 }
MplsStaticIlmEntry ::=
SEQUENCE {
mplsStaticIlmInlabel Integer32,
mplsStaticIlmOpcode INTEGER,
mplsStaticIlmNexthop IpAddress,
mplsStaticIlmOutlabel Integer32,
mplsStaticIlmRowStatus RowStatus
}
mplsStaticIlmInlabel OBJECT-TYPE
SYNTAX Integer32 (16..1048575)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Incoming label."
::= { mplsStaticIlmEntry 1 }
mplsStaticIlmOpcode OBJECT-TYPE
SYNTAX INTEGER {swap(1), pop(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The opcode of the ilm entry.The meanings of the values are:
swap(1) - swap incoming label;
pop(2) - pop incoming label."
::= { mplsStaticIlmEntry 2 }
mplsStaticIlmNexthop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Nexthop IPV4 address of the ILM."
::= { mplsStaticIlmEntry 3 }
mplsStaticIlmOutlabel OBJECT-TYPE
SYNTAX Integer32 (0|3|16..1048575)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out-going label for the ILM."
::= { mplsStaticIlmEntry 4 }
mplsStaticIlmRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { mplsStaticIlmEntry 10 }
mplsIlmDatabaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsIlmDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS ilm database table."
::= { mpls 30 }
mplsIlmDatabaseEntry OBJECT-TYPE
SYNTAX MplsIlmDatabaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS ilm database entries."
INDEX { mplsIlmDatabaseIndex }
::= { mplsIlmDatabaseTable 1 }
MplsIlmDatabaseEntry ::=
SEQUENCE {
mplsIlmDatabaseIndex Integer32,
mplsIlmDatabaseFecPrefix IpAddress,
mplsIlmDatabaseFecPrefixLen Integer32,
mplsIlmDatabaseInlabel Integer32,
mplsIlmDatabaseOutlabel Integer32,
mplsIlmDatabaseNexthop IpAddress,
mplsIlmDatabaseOutInterface OCTET STRING,
mplsIlmDatabaseState INTEGER,
mplsIlmDatabaseNexthopMac MacAddress
}
mplsIlmDatabaseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the ILM entry."
::= { mplsIlmDatabaseEntry 1 }
mplsIlmDatabaseFecPrefix OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FEC prefix."
::= { mplsIlmDatabaseEntry 2 }
mplsIlmDatabaseFecPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FEC prefix length."
::= { mplsIlmDatabaseEntry 3 }
mplsIlmDatabaseInlabel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Incoming label for the FEC."
::= { mplsIlmDatabaseEntry 4 }
mplsIlmDatabaseOutlabel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out-going label for the FEC."
::= { mplsIlmDatabaseEntry 5 }
mplsIlmDatabaseNexthop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nexthop IPV4 address of the FEC."
::= { mplsIlmDatabaseEntry 6 }
mplsIlmDatabaseOutInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out-going interface for the ilm entry."
::= { mplsIlmDatabaseEntry 7 }
mplsIlmDatabaseState OBJECT-TYPE
SYNTAX INTEGER {active(1),inactive(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the ILM entry.The meanings of the values are:
active(1) - the entry is active;
inactive(2) - the entry is inactive;"
::= { mplsIlmDatabaseEntry 8 }
mplsIlmDatabaseNexthopMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nexthop mac address of the FEC."
::= { mplsIlmDatabaseEntry 11 }
mplsPwTpeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsPwTpeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all mpls pw-tpe instances."
::= { mpls 31 }
mplsPwTpeEntry OBJECT-TYPE
SYNTAX MplsPwTpeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsPwTpeTable."
INDEX { mplsPwTpeName}
::= { mplsPwTpeTable 1 }
MplsPwTpeEntry ::=
SEQUENCE {
mplsPwTpeName OCTET STRING,
mplsPwTpeRowStatus RowStatus,
mplsPwTpeDescription OCTET STRING,
mplsPwTpeOAMMegLevel Integer32,
mplsPwTpeOAMMegId OCTET STRING,
mplsPwTpeOAMMegIdIcc Integer32,
mplsPwTpeOAMMepId Integer32,
mplsPwTpeOAMMepInterval INTEGER,
mplsPwTpeOAMMepExp Integer32,
mplsPwTpeOAMRMepId Integer32,
mplsPwTpeOAMCCState INTEGER,
mplsPwTpeOAMEventCacheSize Integer32,
mplsPwTpeOAM1dmCacheSize Integer32,
mplsPwTpeOAMAisClientSupress INTEGER,
mplsPwTpeOAMLck INTEGER,
mplsPwTpeOAMEvtLOC INTEGER,
mplsPwTpeOAMEvtUMP INTEGER,
mplsPwTpeOAMEvtUIN INTEGER,
mplsPwTpeOAMEvtUMG INTEGER,
mplsPwTpeOAMEvtULV INTEGER,
mplsPwTpeOAMEvtW1ST INTEGER,
mplsPwTpeOAMEvtRDIR INTEGER,
mplsPwTpeOAMEvtRDIT INTEGER,
mplsPwTpeOAMEvtAISR INTEGER,
mplsPwTpeOAMEvtAIST INTEGER,
mplsPwTpeOAMEvtAISD INTEGER,
mplsPwTpeOAMEvtLCKR INTEGER,
mplsPwTpeOAMEvtLCKT INTEGER,
mplsPwTpeOAMEvtLCKD INTEGER,
mplsPwTpeOAMEvtCRC INTEGER,
mplsPwTpeOAMState INTEGER,
mplsPwTpeIngressPkts Counter64,
mplsPwTpeIngressBytes Counter64,
mplsPwTpeEgressPkts Counter64,
mplsPwTpeEgressBytes Counter64,
mplsPwTpeStats INTEGER,
mplsPwTpeBandwidth Integer32,
mplsPwTpeOAMLmDualExp Integer32,
mplsPwTpeOAMLmDualStatInterval Integer32,
mplsPwTpeOAMLmDualCacheSize Integer32,
mplsPwTpeOAMLmSingleExp Integer32,
mplsPwTpeOAMLmSingleInterval INTEGER,
mplsPwTpeOAMLmSingleCacheSize Integer32,
mplsPwTpeOAMLmEnableState INTEGER,
mplsPwTpeOAMLmLocalLossThreshold Integer32,
mplsPwTpeOAMLmRemoteLossThreshold Integer32,
mplsPwTpeOAMLmSingleRxCount Integer32,
mplsPwTpeOAMLmSingleTxCount Integer32,
mplsPwTpeOAMLmSingleSuccessRate Integer32,
mplsPwTpeOAMLmSingleStartTime OCTET STRING,
mplsPwTpeOAMLmSingleEndTime OCTET STRING
}
mplsPwTpeName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Lsp-pe."
::= { mplsPwTpeEntry 1 }
mplsPwTpeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsPwTpeEntry 10 }
mplsPwTpeDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this T-PE type PW.
Only less than 20 octets is accepted."
::= { mplsPwTpeEntry 11 }
mplsPwTpeOAMMegLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OAM level."
DEFVAL { 7 }
::= { mplsPwTpeEntry 20 }
mplsPwTpeOAMMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEG ID of the lsp-pe."
::= { mplsPwTpeEntry 21 }
mplsPwTpeOAMMegIdIcc OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ICC length of MEG ID."
DEFVAL { 6 }
::= { mplsPwTpeEntry 22 }
mplsPwTpeOAMMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEP ID."
::= { mplsPwTpeEntry 23 }
mplsPwTpeOAMMepInterval OBJECT-TYPE
SYNTAX INTEGER
{
three-point-three-ms(1),
ten-ms(2),
one-hundred-ms(3),
one-sec(4),
ten-sec(5),
one-min(6),
ten-min(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEP Interval."
::= { mplsPwTpeEntry 24 }
mplsPwTpeOAMMepExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EXP value, default is 7."
DEFVAL { 7 }
::= { mplsPwTpeEntry 25 }
mplsPwTpeOAMRMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP ID."
::= { mplsPwTpeEntry 26 }
mplsPwTpeOAMCCState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CC state."
DEFVAL { disable }
::= { mplsPwTpeEntry 27 }
mplsPwTpeOAMEventCacheSize OBJECT-TYPE
SYNTAX Integer32 (8..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Event entry cache size."
DEFVAL { 8 }
::= { mplsPwTpeEntry 28 }
mplsPwTpeOAM1dmCacheSize OBJECT-TYPE
SYNTAX Integer32 (8..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1dm entry cache size."
DEFVAL { 8 }
::= { mplsPwTpeEntry 29 }
mplsPwTpeOAMAisClientSupress OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AIS client supress state."
DEFVAL { disable }
::= { mplsPwTpeEntry 30 }
mplsPwTpeOAMLck OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable pw-tpe lock."
DEFVAL { disable }
::= { mplsPwTpeEntry 31 }
mplsPwTpeOAMEvtLOC OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loc state."
DEFVAL { disable }
::= { mplsPwTpeEntry 32 }
mplsPwTpeOAMEvtUMP OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp RMEPID state."
DEFVAL { disable }
::= { mplsPwTpeEntry 33 }
mplsPwTpeOAMEvtUIN OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp interval state."
DEFVAL { disable }
::= { mplsPwTpeEntry 34 }
mplsPwTpeOAMEvtUMG OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp MEGID state."
DEFVAL { disable }
::= { mplsPwTpeEntry 35 }
mplsPwTpeOAMEvtULV OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp Level state."
DEFVAL { disable }
::= { mplsPwTpeEntry 36 }
mplsPwTpeOAMEvtW1ST OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wait 1st CCM state."
DEFVAL { disable }
::= { mplsPwTpeEntry 37 }
mplsPwTpeOAMEvtRDIR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDI RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 38 }
mplsPwTpeOAMEvtRDIT OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDI TX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 39 }
mplsPwTpeOAMEvtAISR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 40 }
mplsPwTpeOAMEvtAIST OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 41 }
mplsPwTpeOAMEvtAISD OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 42 }
mplsPwTpeOAMEvtLCKR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 43 }
mplsPwTpeOAMEvtLCKT OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 44 }
mplsPwTpeOAMEvtLCKD OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 45 }
mplsPwTpeOAMEvtCRC OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CRC RX state."
DEFVAL { disable }
::= { mplsPwTpeEntry 46 }
mplsPwTpeOAMState OBJECT-TYPE
SYNTAX INTEGER {init(0), fail(1), ok(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"oam-y1731 Rmep state."
::= { mplsPwTpeEntry 50 }
mplsPwTpeIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packtes number of mpls pw-tpe."
::= { mplsPwTpeEntry 51 }
mplsPwTpeIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of mpls pw-tpe."
::= { mplsPwTpeEntry 52 }
mplsPwTpeEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packtes number of mpls pw-tpe."
::= { mplsPwTpeEntry 53 }
mplsPwTpeEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of mpls pw-tpe."
::= { mplsPwTpeEntry 54 }
mplsPwTpeStats OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pw-tpe statistics."
DEFVAL { disable }
::= { mplsPwTpeEntry 55 }
mplsPwTpeBandwidth OBJECT-TYPE
SYNTAX Integer32 (-1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"pw-tpe bandwidth in kbps. -1 means no limitation"
::= { mplsPwTpeEntry 56 }
mplsPwTpeOAMLmDualExp OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment packets with specified exp will be counted.
<0-7> specified exp; 8 means Packets with different exp will be counted separately;
9 means All packets with different exp will be counted together."
::= { mplsPwTpeEntry 61 }
mplsPwTpeOAMLmDualStatInterval OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment interval value."
DEFVAL { 1 }
::= { mplsPwTpeEntry 62 }
mplsPwTpeOAMLmDualCacheSize OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment cache size."
DEFVAL { 128 }
::= { mplsPwTpeEntry 63 }
mplsPwTpeOAMLmSingleExp OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure single-ended loss measurment packets with specified exp will be counted.
<0-7> specified exp; 8 means Packets with different exp will be counted separately;
9 means All packets with different exp will be counted together."
::= { mplsPwTpeEntry 66 }
mplsPwTpeOAMLmSingleInterval OBJECT-TYPE
SYNTAX INTEGER
{
one-hundred-ms(1),
one-sec(2),
ten-sec(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Interval."
::= { mplsPwTpeEntry 67 }
mplsPwTpeOAMLmSingleCacheSize OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure single-ended loss measurment cache size."
DEFVAL { 128 }
::= { mplsPwTpeEntry 68 }
mplsPwTpeOAMLmEnableState OBJECT-TYPE
SYNTAX INTEGER {enable-dual(1), enable-single(2), disable(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable oam-y1731 loss measurment."
DEFVAL { disable }
::= { mplsPwTpeEntry 70 }
mplsPwTpeOAMLmLocalLossThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local packet loss percentage, 0 means threshold not enabled."
DEFVAL { 0 }
::= { mplsPwTpeEntry 71 }
mplsPwTpeOAMLmRemoteLossThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local packet loss percentage, 0 means threshold not enabled."
DEFVAL { 0 }
::= { mplsPwTpeEntry 72 }
mplsPwTpeOAMLmSingleRxCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended packet Rx count."
::= { mplsPwTpeEntry 73 }
mplsPwTpeOAMLmSingleTxCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended packet Tx count."
::= { mplsPwTpeEntry 74 }
mplsPwTpeOAMLmSingleSuccessRate OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended success rate."
::= { mplsPwTpeEntry 75 }
mplsPwTpeOAMLmSingleStartTime OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM proactive single-ended start time."
::= { mplsPwTpeEntry 76 }
mplsPwTpeOAMLmSingleEndTime OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM proactive single-ended end time."
::= { mplsPwTpeEntry 77 }
mplsPwTpeConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsPwTpeConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of configuration of all mpls pw-tpe instances."
::= { mpls 32 }
mplsPwTpeConfEntry OBJECT-TYPE
SYNTAX MplsPwTpeConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsPwTpeConfTable."
INDEX { mplsPwTpeName}
::= { mplsPwTpeConfTable 1 }
MplsPwTpeConfEntry ::=
SEQUENCE {
mplsPwTpeConfInlabel Integer32,
mplsPwTpeConfOutlabel Integer32,
mplsPwTpeConfPwMode INTEGER,
mplsPwTpeConfTunnel OCTET STRING,
mplsPwTpeConfRowStatus RowStatus
}
mplsPwTpeConfInlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Incoming label of the t-pe."
::= { mplsPwTpeConfEntry 1 }
mplsPwTpeConfOutlabel OBJECT-TYPE
SYNTAX Integer32(16..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Outgoing label of the t-pe."
::= { mplsPwTpeConfEntry 2 }
mplsPwTpeConfPwMode OBJECT-TYPE
SYNTAX INTEGER { raw(1), tagged(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Pw mode of the t-pe."
DEFVAL { raw }
::= { mplsPwTpeConfEntry 3 }
mplsPwTpeConfTunnel OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Tunnel name."
::= { mplsPwTpeConfEntry 4 }
mplsPwTpeConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsPwTpeConfEntry 10 }
mplsTPVpwsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTPVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specify an MPLS Layer-2 Virtual Circuit."
::= { mpls 33 }
mplsTPVpwsEntry OBJECT-TYPE
SYNTAX MplsTPVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTPVpwsTable."
INDEX { mplsTPVpwsVcId}
::= { mplsTPVpwsTable 1 }
MplsTPVpwsEntry ::=
SEQUENCE {
mplsTPVpwsVcId Integer32,
mplsTPVpwsVcName OCTET STRING,
mplsTPVpwsApsType INTEGER,
mplsTPVpwsVlanOperation INTEGER,
mplsTPVpwsRowStatus RowStatus,
mplsTPVpwsPrimaryPw OCTET STRING,
mplsTPVpwsSecondaryPw OCTET STRING,
mplsTPVpwsSelectedPw OCTET STRING,
mplsTPVpwsDescription OCTET STRING,
mplsTPAcVpwsIngressPkts Counter64,
mplsTPAcVpwsIngressbytes Counter64,
mplsTPAcVpwsEgressPkts Counter64,
mplsTPAcVpwsEgressBytes Counter64,
mplsTPVpwsG8131Mode INTEGER,
mplsTPVpwsG8131WTRTimer Integer32,
mplsTPVpwsG8131HoldOffTimer Integer32,
mplsTPVpwsG8131Action INTEGER,
mplsTPVpwsG8131WorkingPw OCTET STRING,
mplsTPVpwsG8131ProtectionPw OCTET STRING,
mplsTPVpwsG8131ActivePath INTEGER,
mplsTPVpwsG8131WTRTimeLeft Integer32,
mplsTPVpwsG8131HoldOffTimeLeft Integer32,
mplsTPVpwsG8131DFOPState INTEGER,
mplsTPVpwsG8131CurrentState INTEGER,
mplsTPVpwsG8131LastState INTEGER,
mplsTPVpwsG8131CurrentEvent INTEGER,
mplsTPVpwsG8131FarEndLastEvent INTEGER,
mplsTPVpwsG8131RequestSignal INTEGER,
mplsTPVpwsOAMCsfInterval Integer32,
mplsTPVpwsOAMCSFRxDown INTEGER,
mplsTPVpwsOAMCSFRxRelay INTEGER,
mplsTPVpwsOAMCSFRxRelayMdName OCTET STRING,
mplsTPVpwsOAMCSFRxRelayMaVid Integer32,
mplsTPVpwsOAMCSFRxRelayMepId Integer32
}
mplsTPVpwsVcId OBJECT-TYPE
SYNTAX Integer32(1..424967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Layer-2 Virtual Circuit."
::= { mplsTPVpwsEntry 1 }
mplsTPVpwsVcName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifying string for mpls-tp vpws.
Only 20 octets is accepted.."
::= { mplsTPVpwsEntry 2 }
mplsTPVpwsApsType OBJECT-TYPE
SYNTAX INTEGER { aps(1), non-aps(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set aps type for mpls-tp vpws."
DEFVAL { 2 }
::= { mplsTPVpwsEntry 3 }
mplsTPVpwsVlanOperation OBJECT-TYPE
SYNTAX INTEGER { ac-vlan-operation(1), no-ac-vlan-operation(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set enable ac vlan operation for mpls-tp vpws."
DEFVAL { 2 }
::= { mplsTPVpwsEntry 4 }
mplsTPVpwsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTPVpwsEntry 10 }
mplsTPVpwsPrimaryPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary pw tpe name of the mpls-tp vpws."
::= { mplsTPVpwsEntry 11 }
mplsTPVpwsSecondaryPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary pw tpe name of the mpls-tp vpws.
Can not set secondary pw for non-aps type."
::= { mplsTPVpwsEntry 12 }
mplsTPVpwsSelectedPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary pw tpe name of the mpls-tp vpws.
Can not set secondary pw for non-aps type."
::= { mplsTPVpwsEntry 13 }
-- mplsTPVpwsIngressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress packets number of mpls vpws."
-- ::= { mplsTPVpwsEntry 14 }
--
-- mplsTPVpwsIngressbytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress bytes number of mpls vpws."
-- ::= { mplsTPVpwsEntry 15 }
--
-- mplsTPVpwsEgressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress packets number of mpls vpws."
-- ::= { mplsTPVpwsEntry 16 }
--
-- mplsTPVpwsEgressBytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress bytes number of mpls vpws."
-- ::= { mplsTPVpwsEntry 17 }
mplsTPVpwsDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this instance of MPLS based VPWS.
Only less than 20 octets is accepted."
::= { mplsTPVpwsEntry 18 }
-- mplsTPVpwsStats OBJECT-TYPE
-- SYNTAX INTEGER {enable(1),disable(2)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Set statistics for mpls-tp vpws. The meanings of the values are:
-- enable(1) - enable statistics;
-- disable(2) - disable statistics;"
-- DEFVAL { 2 }
-- ::= { mplsTPVpwsEntry 19 }
mplsTPAcVpwsIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress packets number of mpls ac vpws."
::= { mplsTPVpwsEntry 21 }
mplsTPAcVpwsIngressbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress bytes number of mpls ac vpws."
::= { mplsTPVpwsEntry 22 }
mplsTPAcVpwsEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress packets number of mpls ac vpws."
::= { mplsTPVpwsEntry 23 }
mplsTPAcVpwsEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress bytes number of mpls ac vpws."
::= { mplsTPVpwsEntry 24 }
mplsTPVpwsG8131Mode OBJECT-TYPE
SYNTAX INTEGER { revertive(1), non-revertive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 mode for the mpls tp vpws."
::= { mplsTPVpwsEntry 30 }
mplsTPVpwsG8131WTRTimer OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 wait-to-restore timer value for the mpls tp vpws, in minutes."
DEFVAL {5}
::= { mplsTPVpwsEntry 31 }
mplsTPVpwsG8131HoldOffTimer OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 hold-off timer value for the mpls tp vpws, steps of 100ms."
DEFVAL {0}
::= { mplsTPVpwsEntry 32 }
mplsTPVpwsG8131Action OBJECT-TYPE
SYNTAX INTEGER { force-switch(1), manual-swtich-to-working(2),
manual-switch-to-protection(3), lockout(4),
exercise(5), clear(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 actions for the mpls tp vpws."
::= { mplsTPVpwsEntry 33 }
mplsTPVpwsG8131WorkingPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 working pw for the mpls tp vpws."
::= { mplsTPVpwsEntry 40 }
mplsTPVpwsG8131ProtectionPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 protection pw for the mpls tp vpws."
::= { mplsTPVpwsEntry 41 }
mplsTPVpwsG8131ActivePath OBJECT-TYPE
SYNTAX INTEGER { none(0), working-lsp(1), protection-lsp(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 active path for the mpls tp vpws."
::= { mplsTPVpwsEntry 42 }
mplsTPVpwsG8131WTRTimeLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left time of G8131 wait-to-restore timer of the mpls tp vpws."
::= { mplsTPVpwsEntry 43 }
mplsTPVpwsG8131HoldOffTimeLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left time of G8131 hold-off timer of the mpls tp vpws."
::= { mplsTPVpwsEntry 44 }
mplsTPVpwsG8131DFOPState OBJECT-TYPE
SYNTAX INTEGER
{
not-in-defect-mode(1),
b-bit-mismatch-defect(2),
r-bit-mismatch-defect(3),
invalid-request-state(4),
aps-recv-on-working-entity(5),
aps-pdu-not-recv-after-state-change(6),
a-bit-mismatch-defect(7),
d-bit-mismatch-defect(8),
t-bit-mismatch-defect(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 DFOP state of the mpls tp vpws."
::= { mplsTPVpwsEntry 45 }
mplsTPVpwsG8131CurrentState OBJECT-TYPE
SYNTAX INTEGER
{
no-request-working-active(0),
no-request-protection-avtive(1),
lockout-of-protection(2),
forced-switch(3),
signal-fail-on-working(4),
signal-fail-on-protection(5),
signal-degrade-on-working(6),
signal-degrade-on-protection(7),
manual-switch-to-protection(8),
manual-switch-to-working(9),
wait-to-restore(10),
do-not-revert(11),
exercise-on-working(12),
exercise-on-protection(13),
reverse-request-on-working(14),
reverse-request-on-protection(15),
none(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 current state of the mpls tp vpws."
::= { mplsTPVpwsEntry 46 }
mplsTPVpwsG8131LastState OBJECT-TYPE
SYNTAX INTEGER
{
no-request-working-active(0),
no-request-protection-avtive(1),
lockout-of-protection(2),
forced-switch(3),
signal-fail-on-working(4),
signal-fail-on-protection(5),
signal-degrade-on-working(6),
signal-degrade-on-protection(7),
manual-switch-to-protection(8),
manual-switch-to-working(9),
wait-to-restore(10),
do-not-revert(11),
exercise-on-working(12),
exercise-on-protection(13),
reverse-request-on-working(14),
reverse-request-on-protection(15),
none(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 last state of the mpls tp vpws."
::= { mplsTPVpwsEntry 47 }
mplsTPVpwsG8131CurrentEvent OBJECT-TYPE
SYNTAX INTEGER
{
local-lockout(0),
local-force-switch(1),
local-signal-fail-on-working(2),
local-working-recover-from-signal-fail(3),
local-signal-fail-on-protection(4),
local-protection-recover-from-signal-fail(5),
local-signal-degrade-on-working(6),
local-working-recover-from-signal-degrade(7),
local-signal-degrade-on-protection(8),
local-protection-recover-from-signal-degrade(9),
local-manual-switch-to-protection(10),
local-manual-switch-to-working(11),
local-clear(12),
local-exercise(13),
local-wtr-timer-expire(14),
remote-lockout(15),
remote-signal-fail-on-protection(16),
remote-force-switch(17),
remote-signal-fail-on-working(18),
remote-signal-degrade-on-working(19),
remote-signal-degrade-on-protection(20),
remote-manual-switch-to-protection(21),
remote-manual-switch-to-working(22),
remote-wait-to-restore(23),
remote-exercise-on-working(24),
remote-exercise-on-protection(25),
remote-reverse-request-on-working(26),
remote-reverse-request-on-protection(27),
remote-no-request-null(28),
remote-no-request-normal(29),
remote-do-not-revert(30),
none(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 current event of the mpls tp vpws."
::= { mplsTPVpwsEntry 48 }
mplsTPVpwsG8131FarEndLastEvent OBJECT-TYPE
SYNTAX INTEGER
{
local-lockout(0),
local-force-switch(1),
local-signal-fail-on-working(2),
local-working-recover-from-signal-fail(3),
local-signal-fail-on-protection(4),
local-protection-recover-from-signal-fail(5),
local-signal-degrade-on-working(6),
local-working-recover-from-signal-degrade(7),
local-signal-degrade-on-protection(8),
local-protection-recover-from-signal-degrade(9),
local-manual-switch-to-protection(10),
local-manual-switch-to-working(11),
local-clear(12),
local-exercise(13),
local-wtr-timer-expire(14),
remote-lockout(15),
remote-signal-fail-on-protection(16),
remote-force-switch(17),
remote-signal-fail-on-working(18),
remote-signal-degrade-on-working(19),
remote-signal-degrade-on-protection(20),
remote-manual-switch-to-protection(21),
remote-manual-switch-to-working(22),
remote-wait-to-restore(23),
remote-exercise-on-working(24),
remote-exercise-on-protection(25),
remote-reverse-request-on-working(26),
remote-reverse-request-on-protection(27),
remote-no-request-null(28),
remote-no-request-normal(29),
remote-do-not-revert(30),
none(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 far end last event of the mpls tp vpws."
::= { mplsTPVpwsEntry 49 }
mplsTPVpwsG8131RequestSignal OBJECT-TYPE
SYNTAX INTEGER { normal(1), null(2), none(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 request signal of the mpls tp vpws."
::= { mplsTPVpwsEntry 50 }
mplsTPVpwsOAMCsfInterval OBJECT-TYPE
SYNTAX Integer32 (0|1|60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of CSF PDU.
0:no oam-y1731 csf server enable."
::= { mplsTPVpwsEntry 60 }
mplsTPVpwsOAMCSFRxDown OBJECT-TYPE
SYNTAX INTEGER (0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action of Receiving CSF PDU AC Down.
0:no oam-y1731 csf rx-aciton down.
1:oam-y1731 csf rx-action down enable."
::= { mplsTPVpwsEntry 61 }
mplsTPVpwsOAMCSFRxRelay OBJECT-TYPE
SYNTAX INTEGER (0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action of Receiving CSF PDU AC relay to Eth-csf.
0:no oam-y1731 csf rx-aciton relay.
1:oam-y1731 csf rx-action relay enable."
::= { mplsTPVpwsEntry 62 }
mplsTPVpwsOAMCSFRxRelayMdName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..44))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MD Name for rx-action relay."
::= { mplsTPVpwsEntry 63 }
mplsTPVpwsOAMCSFRxRelayMaVid OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MA Vlan Id for rx-action relay."
::= { mplsTPVpwsEntry 64 }
mplsTPVpwsOAMCSFRxRelayMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mep Id for rx-action relay."
::= { mplsTPVpwsEntry 65 }
mplsVplsTPPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsTPPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peers to VPLS domains."
::= { mpls 34 }
mplsVplsTPPeerEntry OBJECT-TYPE
SYNTAX MplsVplsTPPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsTPPeerTable."
INDEX { mplsVplsTPPeerVplsId, mplsVplsTPPeerName}
::= { mplsVplsTPPeerTable 1 }
MplsVplsTPPeerEntry ::=
SEQUENCE {
mplsVplsTPPeerVplsId Unsigned32,
mplsVplsTPPeerName OCTET STRING,
mplsVplsTPPeerApsType INTEGER,
mplsVplsTPPeerPEType INTEGER,
mplsVplsTPPeerRowStatus RowStatus,
mplsVplsTPPeerPrimaryPw OCTET STRING,
mplsVplsTPPeerSecondaryPw OCTET STRING,
mplsVplsTPPeerSelectedPw OCTET STRING,
mplsVplsTPPeerDescription OCTET STRING,
mplsVplsTPPeerG8131Mode INTEGER,
mplsVplsTPPeerG8131WTRTimer Integer32,
mplsVplsTPPeerG8131HoldOffTimer Integer32,
mplsVplsTPPeerG8131Action INTEGER,
mplsVplsTPPeerG8131WorkingPw OCTET STRING,
mplsVplsTPPeerG8131ProtectionPw OCTET STRING,
mplsVplsTPPeerG8131ActivePath INTEGER,
mplsVplsTPPeerG8131WTRTimeLeft Integer32,
mplsVplsTPPeerG8131HoldOffTimeLeft Integer32,
mplsVplsTPPeerG8131DFOPState INTEGER,
mplsVplsTPPeerG8131CurrentState INTEGER,
mplsVplsTPPeerG8131LastState INTEGER,
mplsVplsTPPeerG8131CurrentEvent INTEGER,
mplsVplsTPPeerG8131FarEndLastEvent INTEGER,
mplsVplsTPPeerG8131RequestSignal INTEGER
}
mplsVplsTPPeerVplsId OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsTPPeerEntry 1 }
mplsVplsTPPeerName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the peer node to be added."
::= { mplsVplsTPPeerEntry 2 }
mplsVplsTPPeerApsType OBJECT-TYPE
SYNTAX INTEGER { aps(1), non-aps(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"APS type of the vpls tp-peer."
DEFVAL { non-aps }
::= { mplsVplsTPPeerEntry 3 }
mplsVplsTPPeerPEType OBJECT-TYPE
SYNTAX INTEGER {spe(1),upe(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set PW type for mpls vpls tp-peer. The meanings of the values are:
spe(1) - Superstarum PE;
upe(2) - Underlayer PE;"
DEFVAL { 1 }
::= { mplsVplsTPPeerEntry 4 }
mplsVplsTPPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active."
::= { mplsVplsTPPeerEntry 10 }
mplsVplsTPPeerPrimaryPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary pw of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 11 }
mplsVplsTPPeerSecondaryPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary pw of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 12 }
mplsVplsTPPeerSelectedPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary pw tpe name of the vpls tp-peer.
Can not set secondary pw for non-aps type."
::= { mplsVplsTPPeerEntry 13 }
-- mplsVplsTPPeerIngressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress packets number of mpls vpls peer."
-- ::= { mplsVplsTPPeerEntry 14 }
--
-- mplsVplsTPPeerIngressbytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Ingress bytes number of mpls vpls peer."
-- ::= { mplsVplsTPPeerEntry 15 }
--
-- mplsVplsTPPeerEgressPkts OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress packets number of mpls vpls peer."
-- ::= { mplsVplsTPPeerEntry 16 }
--
-- mplsVplsTPPeerEgressBytes OBJECT-TYPE
-- SYNTAX Counter64
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Egress bytes number of mpls vpls peer."
-- ::= { mplsVplsTPPeerEntry 17 }
mplsVplsTPPeerDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this VPLS peer.
Only less than 20 octets is accepted."
::= { mplsVplsTPPeerEntry 18 }
-- mplsVplsTPPeerStats OBJECT-TYPE
-- SYNTAX INTEGER {enable(1),disable(2)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Set statistics for mpls vpls tp-peer. The meanings of the values are:
-- enable(1) - enable statistics;
-- disable(2) - disable statistics;"
-- DEFVAL { 2 }
-- ::= { mplsVplsTPPeerEntry 19 }
mplsVplsTPPeerG8131Mode OBJECT-TYPE
SYNTAX INTEGER { revertive(1), non-revertive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 mode for the vpls tp-peer."
::= { mplsVplsTPPeerEntry 30 }
mplsVplsTPPeerG8131WTRTimer OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 wait-to-restore timer value for the vpls tp-peer, in minutes."
DEFVAL {5}
::= { mplsVplsTPPeerEntry 31 }
mplsVplsTPPeerG8131HoldOffTimer OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 hold-off timer value for the vpls tp-peer, steps of 100ms."
DEFVAL {0}
::= { mplsVplsTPPeerEntry 32 }
mplsVplsTPPeerG8131Action OBJECT-TYPE
SYNTAX INTEGER { force-switch(1), manual-swtich-to-working(2),
manual-switch-to-protection(3), lockout(4),
exercise(5), clear(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8131 actions for the vpls tp-peer."
::= { mplsVplsTPPeerEntry 33 }
mplsVplsTPPeerG8131WorkingPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 working pw for the vpls tp-peer."
::= { mplsVplsTPPeerEntry 40 }
mplsVplsTPPeerG8131ProtectionPw OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 protection pw for the vpls tp-peer."
::= { mplsVplsTPPeerEntry 41 }
mplsVplsTPPeerG8131ActivePath OBJECT-TYPE
SYNTAX INTEGER { none(0), working-lsp(1), protection-lsp(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 active path for the vpls tp-peer."
::= { mplsVplsTPPeerEntry 42 }
mplsVplsTPPeerG8131WTRTimeLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left time of G8131 wait-to-restore timer of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 43 }
mplsVplsTPPeerG8131HoldOffTimeLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Left time of G8131 hold-off timer of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 44 }
mplsVplsTPPeerG8131DFOPState OBJECT-TYPE
SYNTAX INTEGER
{
not-in-defect-mode(1),
b-bit-mismatch-defect(2),
r-bit-mismatch-defect(3),
invalid-request-state(4),
aps-recv-on-working-entity(5),
aps-pdu-not-recv-after-state-change(6),
a-bit-mismatch-defect(7),
d-bit-mismatch-defect(8),
t-bit-mismatch-defect(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 DFOP state of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 45 }
mplsVplsTPPeerG8131CurrentState OBJECT-TYPE
SYNTAX INTEGER
{
no-request-working-active(0),
no-request-protection-avtive(1),
lockout-of-protection(2),
forced-switch(3),
signal-fail-on-working(4),
signal-fail-on-protection(5),
signal-degrade-on-working(6),
signal-degrade-on-protection(7),
manual-switch-to-protection(8),
manual-switch-to-working(9),
wait-to-restore(10),
do-not-revert(11),
exercise-on-working(12),
exercise-on-protection(13),
reverse-request-on-working(14),
reverse-request-on-protection(15),
none(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 current state of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 46 }
mplsVplsTPPeerG8131LastState OBJECT-TYPE
SYNTAX INTEGER
{
no-request-working-active(0),
no-request-protection-avtive(1),
lockout-of-protection(2),
forced-switch(3),
signal-fail-on-working(4),
signal-fail-on-protection(5),
signal-degrade-on-working(6),
signal-degrade-on-protection(7),
manual-switch-to-protection(8),
manual-switch-to-working(9),
wait-to-restore(10),
do-not-revert(11),
exercise-on-working(12),
exercise-on-protection(13),
reverse-request-on-working(14),
reverse-request-on-protection(15),
none(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 last state of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 47 }
mplsVplsTPPeerG8131CurrentEvent OBJECT-TYPE
SYNTAX INTEGER
{
local-lockout(0),
local-force-switch(1),
local-signal-fail-on-working(2),
local-working-recover-from-signal-fail(3),
local-signal-fail-on-protection(4),
local-protection-recover-from-signal-fail(5),
local-signal-degrade-on-working(6),
local-working-recover-from-signal-degrade(7),
local-signal-degrade-on-protection(8),
local-protection-recover-from-signal-degrade(9),
local-manual-switch-to-protection(10),
local-manual-switch-to-working(11),
local-clear(12),
local-exercise(13),
local-wtr-timer-expire(14),
remote-lockout(15),
remote-signal-fail-on-protection(16),
remote-force-switch(17),
remote-signal-fail-on-working(18),
remote-signal-degrade-on-working(19),
remote-signal-degrade-on-protection(20),
remote-manual-switch-to-protection(21),
remote-manual-switch-to-working(22),
remote-wait-to-restore(23),
remote-exercise-on-working(24),
remote-exercise-on-protection(25),
remote-reverse-request-on-working(26),
remote-reverse-request-on-protection(27),
remote-no-request-null(28),
remote-no-request-normal(29),
remote-do-not-revert(30),
none(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 current event of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 48 }
mplsVplsTPPeerG8131FarEndLastEvent OBJECT-TYPE
SYNTAX INTEGER
{
local-lockout(0),
local-force-switch(1),
local-signal-fail-on-working(2),
local-working-recover-from-signal-fail(3),
local-signal-fail-on-protection(4),
local-protection-recover-from-signal-fail(5),
local-signal-degrade-on-working(6),
local-working-recover-from-signal-degrade(7),
local-signal-degrade-on-protection(8),
local-protection-recover-from-signal-degrade(9),
local-manual-switch-to-protection(10),
local-manual-switch-to-working(11),
local-clear(12),
local-exercise(13),
local-wtr-timer-expire(14),
remote-lockout(15),
remote-signal-fail-on-protection(16),
remote-force-switch(17),
remote-signal-fail-on-working(18),
remote-signal-degrade-on-working(19),
remote-signal-degrade-on-protection(20),
remote-manual-switch-to-protection(21),
remote-manual-switch-to-working(22),
remote-wait-to-restore(23),
remote-exercise-on-working(24),
remote-exercise-on-protection(25),
remote-reverse-request-on-working(26),
remote-reverse-request-on-protection(27),
remote-no-request-null(28),
remote-no-request-normal(29),
remote-do-not-revert(30),
none(31)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 far end last event of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 49 }
mplsVplsTPPeerG8131RequestSignal OBJECT-TYPE
SYNTAX INTEGER { normal(1), null(2), none(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G8131 request signal of the vpls tp-peer."
::= { mplsVplsTPPeerEntry 50 }
-- mplsVplsTPPeerMacWithdrawRxPks OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Rx Mac-withdraw packets number of mpls peer."
-- ::= { mplsVplsTPPeerEntry 51 }
--
-- mplsVplsTPPeerMacWithdrawTxPks OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Tx Mac-withdraw packets number of mpls peer."
-- ::= { mplsVplsTPPeerEntry 52 }
--
-- mplsVplsTPPeerMacWithdrawAckRxPks OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Rx Mac-withdraw ACK packets number of mpls peer."
-- ::= { mplsVplsTPPeerEntry 53 }
--
-- mplsVplsTPPeerMacWithdrawAckTxPks OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Tx Mac-withdraw ACK packets number of mpls peer."
-- ::= { mplsVplsTPPeerEntry 54 }
mplsLspPeAisClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPeAisClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all clients bound to ais server(lsp-pe)."
::= { mpls 35 }
mplsLspPeAisClientEntry OBJECT-TYPE
SYNTAX MplsLspPeAisClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspPeAisClientTable."
INDEX { mplsLspPeName, lspPeAisClientBindType, lspPeAisClientBindName }
::= { mplsLspPeAisClientTable 1 }
MplsLspPeAisClientEntry ::=
SEQUENCE {
lspPeAisClientBindType INTEGER,
lspPeAisClientBindName OCTET STRING,
lspPeAisClientRowStatus RowStatus
}
lspPeAisClientBindType OBJECT-TYPE
SYNTAX INTEGER { lsp-p(1), pw-spe(2), pw-tpe(3) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client lsp name for ais server(lsp-pe)."
::= { mplsLspPeAisClientEntry 1 }
lspPeAisClientBindName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client lsp name for ais server(lsp-pe)."
::= { mplsLspPeAisClientEntry 2 }
lspPeAisClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsLspPeAisClientEntry 10 }
mplsLspPeLckClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLspPeLckClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all clients bound to ais server(lsp-pe)."
::= { mpls 36 }
mplsLspPeLckClientEntry OBJECT-TYPE
SYNTAX MplsLspPeLckClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsLspPeLckClientTable."
INDEX { mplsLspPeName, mplsLspPeLckClientBindType, mplsLspPeLckClientBindName }
::= { mplsLspPeLckClientTable 1 }
MplsLspPeLckClientEntry ::=
SEQUENCE {
mplsLspPeLckClientBindType INTEGER,
mplsLspPeLckClientBindName OCTET STRING,
mplsLspPeLckClientRowStatus RowStatus
}
mplsLspPeLckClientBindType OBJECT-TYPE
SYNTAX INTEGER { lsp-p(1), pw-spe(2), pw-tpe(3) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client lsp name for ais server(lsp-pe)."
::= { mplsLspPeLckClientEntry 1 }
mplsLspPeLckClientBindName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client lsp name for ais server(lsp-pe)."
::= { mplsLspPeLckClientEntry 2 }
mplsLspPeLckClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsLspPeLckClientEntry 10 }
mplsTpOAMSdReason OBJECT IDENTIFIER ::= { mpls 44 }
sdReasonAisRx OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ais rx."
DEFVAL { disable }
::= { mplsTpOAMSdReason 1 }
sdReasonAisDefect OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ais defect."
DEFVAL { enable }
::= { mplsTpOAMSdReason 2 }
sdReasonCRC OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CRC defect."
DEFVAL { enable }
::= { mplsTpOAMSdReason 3 }
mplsDCNManagementIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Managemenet ip address for MPLS DCN."
::= { mpls 45 }
mplsTrustTopMostExp OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of mpls trust topmost-exp."
::= { mpls 46 }
mplsTpChannelType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The channel type of mpls-tp oam-y1731."
::= { mpls 47 }
mplsTpNodeId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The node id of the switch."
::= { mpls 48 }
mplsTpOAMSfReason OBJECT IDENTIFIER ::= { mpls 49 }
sfReasonAisDefect OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ais defect."
DEFVAL { disable }
::= { mplsTpOAMSfReason 1 }
sfReasonLoc OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loc."
DEFVAL { enable }
::= { mplsTpOAMSfReason 2 }
sfReasonRdiRx OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Recv Rdi."
DEFVAL { disable }
::= { mplsTpOAMSfReason 3 }
sfReasonAisRx OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Recv Ais."
DEFVAL { disable }
::= { mplsTpOAMSfReason 4 }
sfReasonCsfDefect OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfs Defect."
DEFVAL { disable }
::= { mplsTpOAMSfReason 5 }
mplsTpOAMRdiReason OBJECT IDENTIFIER ::= { mpls 50 }
rdiReasonLoc OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LOC defect."
DEFVAL { enable }
::= { mplsTpOAMRdiReason 1 }
rdiReasonCCError OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CC error defects: include RMEP not found, CC Interval mismatch."
DEFVAL { enable }
::= { mplsTpOAMRdiReason 2 }
rdiReasonCCMisMerge OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CC mismerge defects: include MEGID mismatch, Low CC level."
DEFVAL { enable }
::= { mplsTpOAMRdiReason 3 }
mplsTpOAMAisReason OBJECT IDENTIFIER ::= { mpls 51 }
aisReasonLoc OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LOC defect."
DEFVAL { enable }
::= { mplsTpOAMAisReason 1 }
aisReasonUnExpRMepID OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unexpected RMEPID."
DEFVAL { disable }
::= { mplsTpOAMAisReason 2 }
aisReasonUnExpInterval OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unexpected CC Interval."
DEFVAL { disable }
::= { mplsTpOAMAisReason 3 }
aisReasonUnExpMegId OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unexpected MEGID."
DEFVAL { disable }
::= { mplsTpOAMAisReason 4 }
aisReasonUnExpMegLevel OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unexpected CC Level."
DEFVAL { disable }
::= { mplsTpOAMAisReason 5 }
aisReasonAisDefect OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AIS defect."
DEFVAL { enable }
::= { mplsTpOAMAisReason 6 }
aisReasonLockRx OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lock Rx."
DEFVAL { enable }
::= { mplsTpOAMAisReason 7 }
mplsTpOAMEventRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMEventRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM event rule table."
::= { mpls 52 }
mplsTpOAMEventRuleEntry OBJECT-TYPE
SYNTAX MplsTpOAMEventRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-Tp event rule entries."
INDEX { mplsTpOAMEventId }
::= { mplsTpOAMEventRuleTable 1 }
MplsTpOAMEventRuleEntry ::=
SEQUENCE {
mplsTpOAMEventRuleId INTEGER,
mplsTpOAMEventLog INTEGER,
mplsTpOAMEventTrap INTEGER,
mplsTpOAMEventCache INTEGER
}
mplsTpOAMEventRuleId OBJECT-TYPE
SYNTAX INTEGER
{
loc(1),
unExpRMepID(2),
unExpInterval(3),
unExpMegId(4),
unExpMegLevel(5),
rdiRx(6),
rdiTx(7),
waitFirstCC(8),
aisRx(9),
aisTx(10),
aisDefect(11),
eventCacheFull(12),
oneDmCacheFull(13),
lockRx(14),
lockTx(15),
lockDefect(16),
crcDefect(17)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-tp OAM event id."
::= { mplsTpOAMEventRuleEntry 1 }
mplsTpOAMEventLog OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State of MPLS-tp event log."
::= { mplsTpOAMEventRuleEntry 2 }
mplsTpOAMEventTrap OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State of MPLS-tp event trap."
::= { mplsTpOAMEventRuleEntry 3 }
mplsTpOAMEventCache OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State of MPLS-tp event cache."
::= { mplsTpOAMEventRuleEntry 4 }
mplsTpSectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpSectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all mpls-tp section instances."
::= { mpls 53 }
mplsTpSectionEntry OBJECT-TYPE
SYNTAX MplsTpSectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpSectionTable."
INDEX { sectionName }
::= { mplsTpSectionTable 1 }
MplsTpSectionEntry ::=
SEQUENCE {
sectionName OCTET STRING,
sectionRowStatus RowStatus,
sectionPeer IpAddress,
sectionOutIfindex Integer32,
sectionOutMemIfindex Integer32,
sectionDescription OCTET STRING,
sectionMegLevel Integer32,
sectionMegId OCTET STRING,
sectionMegIdIcc Integer32,
sectionMepId Integer32,
sectionMepInterval INTEGER,
sectionMepExp Integer32,
sectionRMepId Integer32,
sectionCCState INTEGER,
sectionEventCacheSize Integer32,
section1dmCacheSize Integer32,
sectionAisInterval Integer32,
sectionLck INTEGER,
sectionLckInterval Integer32,
sectionState INTEGER,
sectionEvtLOC INTEGER,
sectionEvtUMP INTEGER,
sectionEvtUIN INTEGER,
sectionEvtUMG INTEGER,
sectionEvtULV INTEGER,
sectionEvtW1ST INTEGER,
sectionEvtRDIR INTEGER,
sectionEvtRDIT INTEGER,
sectionEvtAISR INTEGER,
sectionEvtAIST INTEGER,
sectionEvtAISD INTEGER,
sectionEvtLCKR INTEGER,
sectionEvtLCKT INTEGER,
sectionEvtLCKD INTEGER,
sectionEvtCRC INTEGER,
sectionLckTxEnable INTEGER,
sectionOAMState INTEGER,
sectionLmDualExp Integer32,
sectionLmDualStatInterval Integer32,
sectionLmDualCacheSize Integer32,
sectionLmSingleExp Integer32,
sectionLmSingleInterval INTEGER,
sectionLmSingleCacheSize Integer32,
sectionLmEnableState INTEGER,
sectionLmLocalLossThreshold Integer32,
sectionLmRemoteLossThreshold Integer32,
sectionLmSingleRxCount Integer32,
sectionLmSingleTxCount Integer32,
sectionLmSingleSuccessRate Integer32,
sectionLmSingleStartTime OCTET STRING,
sectionLmSingleEndTime OCTET STRING
}
sectionName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP section name."
::= { mplsTpSectionEntry 1 }
sectionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpSectionEntry 10 }
sectionPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The peer IP address of the section."
::= { mplsTpSectionEntry 11 }
sectionOutIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The out-going interface of the section in non-ip env."
::= { mplsTpSectionEntry 12 }
sectionOutMemIfindex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The member out-going interface of the section in non-ip env."
::= { mplsTpSectionEntry 13 }
sectionDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Characters describing of this mpls-tp section.
Only less than 20 octets is accepted."
::= { mplsTpSectionEntry 14 }
sectionMegLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OAM level."
DEFVAL { 7 }
::= { mplsTpSectionEntry 19 }
sectionMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEG ID of the service."
::= { mplsTpSectionEntry 20 }
sectionMegIdIcc OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ICC length of MEG ID."
DEFVAL { 6 }
::= { mplsTpSectionEntry 21 }
sectionMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEP ID."
::= { mplsTpSectionEntry 22 }
sectionMepInterval OBJECT-TYPE
SYNTAX INTEGER
{
three-point-three-ms(1),
ten-ms(2),
one-hundred-ms(3),
one-sec(4),
ten-sec(5),
one-min(6),
ten-min(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MEP Interval."
::= { mplsTpSectionEntry 23 }
sectionMepExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"EXP value, default is 7."
DEFVAL { 7 }
::= { mplsTpSectionEntry 24 }
sectionRMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP ID."
::= { mplsTpSectionEntry 25 }
sectionCCState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CC state."
DEFVAL { disable }
::= { mplsTpSectionEntry 26 }
sectionEventCacheSize OBJECT-TYPE
SYNTAX Integer32 (8..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Event entry cache size."
DEFVAL { 8 }
::= { mplsTpSectionEntry 27 }
section1dmCacheSize OBJECT-TYPE
SYNTAX Integer32 (8..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1dm entry cache size."
DEFVAL { 8 }
::= { mplsTpSectionEntry 28 }
sectionAisInterval OBJECT-TYPE
SYNTAX Integer32 (0|1|60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval of AIS PDU.
0:no oam-y1731 ais server enable."
::= { mplsTpSectionEntry 29 }
sectionLck OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Lck state."
DEFVAL { disable }
::= { mplsTpSectionEntry 31 }
sectionLckInterval OBJECT-TYPE
SYNTAX Integer32 (0|1|60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mpls-tp section lock interval.
0:no oam-y1731 lck server enable."
DEFVAL { 0 }
::= { mplsTpSectionEntry 32 }
sectionState OBJECT-TYPE
SYNTAX INTEGER {init(0), fail(1), ok(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPLS-TP section status"
::= { mplsTpSectionEntry 33 }
sectionEvtLOC OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loc state."
DEFVAL { disable }
::= { mplsTpSectionEntry 34 }
sectionEvtUMP OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp RMEPID state."
DEFVAL { disable }
::= { mplsTpSectionEntry 35 }
sectionEvtUIN OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp interval state."
DEFVAL { disable }
::= { mplsTpSectionEntry 36 }
sectionEvtUMG OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp MEGID state."
DEFVAL { disable }
::= { mplsTpSectionEntry 37 }
sectionEvtULV OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unexp Level state."
DEFVAL { disable }
::= { mplsTpSectionEntry 38 }
sectionEvtW1ST OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wait 1st CCM state."
DEFVAL { disable }
::= { mplsTpSectionEntry 39 }
sectionEvtRDIR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDI RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 40 }
sectionEvtRDIT OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDI TX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 41 }
sectionEvtAISR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 42 }
sectionEvtAIST OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 43 }
sectionEvtAISD OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIS RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 44 }
sectionEvtLCKR OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 45 }
sectionEvtLCKT OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 46 }
sectionEvtLCKD OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LCK RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 47 }
sectionLckTxEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"oam-y1731 lck server enable."
DEFVAL { 2 }
::= { mplsTpSectionEntry 48 }
sectionEvtCRC OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CRC RX state."
DEFVAL { disable }
::= { mplsTpSectionEntry 49 }
sectionOAMState OBJECT-TYPE
SYNTAX INTEGER {init(0), fail(1), ok(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"oam-y1731 Rmep state."
::= { mplsTpSectionEntry 50 }
sectionLmDualExp OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment packets with specified exp will be counted.
<0-7> specified exp; 8 means Packets with different exp will be counted separately;
9 means All packets with different exp will be counted together."
::= { mplsTpSectionEntry 61 }
sectionLmDualStatInterval OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment interval value."
DEFVAL { 1 }
::= { mplsTpSectionEntry 62 }
sectionLmDualCacheSize OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure dual-ended loss measurment cache size."
DEFVAL { 128 }
::= { mplsTpSectionEntry 63 }
sectionLmSingleExp OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure single-ended loss measurment packets with specified exp will be counted.
<0-7> specified exp; 8 means Packets with different exp will be counted separately;
9 means All packets with different exp will be counted together."
::= { mplsTpSectionEntry 66 }
sectionLmSingleInterval OBJECT-TYPE
SYNTAX INTEGER
{
one-hundred-ms(1),
one-sec(2),
ten-sec(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Interval."
::= { mplsTpSectionEntry 67 }
sectionLmSingleCacheSize OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure single-ended loss measurment cache size."
DEFVAL { 128 }
::= { mplsTpSectionEntry 68 }
sectionLmEnableState OBJECT-TYPE
SYNTAX INTEGER {enable-dual(1), enable-single(2), disable(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable oam-y1731 loss measurment."
DEFVAL { disable }
::= { mplsTpSectionEntry 70 }
sectionLmLocalLossThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local packet loss percentage, 0 means threshold not enabled."
DEFVAL { 0 }
::= { mplsTpSectionEntry 71 }
sectionLmRemoteLossThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local packet loss percentage, 0 means threshold not enabled."
DEFVAL { 0 }
::= { mplsTpSectionEntry 72 }
sectionLmSingleRxCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended packet Rx count."
::= { mplsTpSectionEntry 73 }
sectionLmSingleTxCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended packet Tx count."
::= { mplsTpSectionEntry 74 }
sectionLmSingleSuccessRate OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM single-ended success rate."
::= { mplsTpSectionEntry 75 }
sectionLmSingleStartTime OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM proactive single-ended start time."
::= { mplsTpSectionEntry 76 }
sectionLmSingleEndTime OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LMM proactive single-ended end time."
::= { mplsTpSectionEntry 77 }
mplsTpSectionAisClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpSectionAisClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all clients bound to mpls-tp section ais server."
::= { mpls 54 }
mplsTpSectionAisClientEntry OBJECT-TYPE
SYNTAX MplsTpSectionAisClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpSectionAisClientTable."
INDEX { sectionName, sectionAisClientBindType, sectionAisClientBindName }
::= { mplsTpSectionAisClientTable 1 }
MplsTpSectionAisClientEntry ::=
SEQUENCE {
sectionAisClientBindType INTEGER,
sectionAisClientBindName OCTET STRING,
sectionAisClientRowStatus RowStatus
}
sectionAisClientBindType OBJECT-TYPE
SYNTAX INTEGER {lsp-p(1),lsp-pe(2)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client type for ais server(lsp-pe)."
::= { mplsTpSectionAisClientEntry 1 }
sectionAisClientBindName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client lsp name for MPLS-TP section ais server."
::= { mplsTpSectionAisClientEntry 2 }
sectionAisClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpSectionAisClientEntry 10 }
mplsTpSectionLckClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpSectionLckClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of all clients bound to mpls-tp section lck server."
::= { mpls 55 }
mplsTpSectionLckClientEntry OBJECT-TYPE
SYNTAX MplsTpSectionLckClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpSectionLckClientTable."
INDEX { sectionName, sectionLckClientBindType, sectionLckClientBindName }
::= { mplsTpSectionLckClientTable 1 }
MplsTpSectionLckClientEntry ::=
SEQUENCE {
sectionLckClientBindType INTEGER,
sectionLckClientBindName OCTET STRING,
sectionLckClientRowStatus RowStatus
}
sectionLckClientBindType OBJECT-TYPE
SYNTAX INTEGER {lsp-p(1),lsp-pe(2)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client type for lck server(section)."
::= { mplsTpSectionLckClientEntry 1 }
sectionLckClientBindName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client lsp name for MPLS-TP section lck server."
::= { mplsTpSectionLckClientEntry 2 }
sectionLckClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpSectionLckClientEntry 10 }
mplsTpOAMClearCache OBJECT-TYPE
SYNTAX INTEGER { event-cache(1), onedm-cache(2), statistics-cache(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear MPLS-TP OAM cache ."
::= { mpls 56 }
mplsTpOAMLoopbackDiscoveryTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLoopbackDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls-tp discovery loopback."
::= { mpls 60 }
mplsTpOAMLoopbackDiscoveryEntry OBJECT-TYPE
SYNTAX MplsTpOAMLoopbackDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpOAMLoopbackDiscoveryTable."
INDEX { oamDiscoveryIndex }
::= { mplsTpOAMLoopbackDiscoveryTable 1 }
MplsTpOAMLoopbackDiscoveryEntry ::=
SEQUENCE {
oamDiscoveryIndex Integer32,
oamDiscoveryServiceType INTEGER,
oamDiscoveryServiceName OCTET STRING,
oamDiscoveryStartTTL Integer32,
oamDiscoveryEndTTL Integer32,
oamDiscoveryMepIdTlv INTEGER,
oamDiscoveryDataTlv Integer32,
oamDiscoveryTimeout Integer32,
oamDiscoveryExp Integer32,
oamDiscoveryTstTlv Integer32,
oamDiscoveryTstPattern Integer32,
oamDiscoveryRowstatus RowStatus,
oamDiscoveryOperState INTEGER,
oamDiscoveryTimeSpent Integer32,
oamDiscoverySuccessRate Integer32
}
oamDiscoveryIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of oam discovery loopback request.Must be 1."
::= { mplsTpOAMLoopbackDiscoveryEntry 1 }
oamDiscoveryServiceType OBJECT-TYPE
SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of the request."
::= { mplsTpOAMLoopbackDiscoveryEntry 2 }
oamDiscoveryServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service name of the request."
::= { mplsTpOAMLoopbackDiscoveryEntry 3 }
oamDiscoveryStartTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to start."
::= { mplsTpOAMLoopbackDiscoveryEntry 5 }
oamDiscoveryEndTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to end."
::= { mplsTpOAMLoopbackDiscoveryEntry 6 }
oamDiscoveryMepIdTlv OBJECT-TYPE
SYNTAX INTEGER {request(1), no-request(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to request the mepid tlv for the request."
DEFVAL { no-request }
::= { mplsTpOAMLoopbackDiscoveryEntry 7 }
oamDiscoveryDataTlv OBJECT-TYPE
SYNTAX Integer32 (0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to end."
DEFVAL { 0 }
::= { mplsTpOAMLoopbackDiscoveryEntry 8 }
oamDiscoveryTimeout OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to end."
DEFVAL { 5 }
::= { mplsTpOAMLoopbackDiscoveryEntry 9 }
oamDiscoveryExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPLS exp."
DEFVAL { 7 }
::= { mplsTpOAMLoopbackDiscoveryEntry 10 }
oamDiscoveryTstTlv OBJECT-TYPE
SYNTAX Integer32 (2..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send with test TLV."
::= { mplsTpOAMLoopbackDiscoveryEntry 11 }
oamDiscoveryTstPattern OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure test pattern.
0 Null signal without CRC-32.
1 Null signal with CRC-32.
2 PRBS without CRC-32.
3 PRBS with CRC-32."
::= { mplsTpOAMLoopbackDiscoveryEntry 12 }
oamDiscoveryRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpOAMLoopbackDiscoveryEntry 15 }
oamDiscoveryOperState OBJECT-TYPE
SYNTAX INTEGER { done(1), in-progress(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation status."
::= { mplsTpOAMLoopbackDiscoveryEntry 16 }
oamDiscoveryTimeSpent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time spent of the request, in ms."
::= { mplsTpOAMLoopbackDiscoveryEntry 17 }
oamDiscoverySuccessRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The success rate of the request."
::= { mplsTpOAMLoopbackDiscoveryEntry 18 }
mplsTpOAMDiscoveryResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMDiscoveryResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls-tp discovery result."
::= { mpls 61 }
mplsTpOAMDiscoveryResultEntry OBJECT-TYPE
SYNTAX MplsTpOAMDiscoveryResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpOAMDiscoveryResultTable."
INDEX { oamDiscoveryResultTTL }
::= { mplsTpOAMDiscoveryResultTable 1 }
MplsTpOAMDiscoveryResultEntry ::=
SEQUENCE {
oamDiscoveryResultTTL Integer32,
oamDiscoveryResultReplyType INTEGER,
oamDiscoveryResultMepId Integer32,
oamDiscoveryResultICC OCTET STRING,
oamDiscoveryResultNodeId IpAddress,
oamDiscoveryResultIfNum Integer32
}
oamDiscoveryResultTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of oam discovery loopback state. TTL number"
::= { mplsTpOAMDiscoveryResultEntry 1 }
oamDiscoveryResultReplyType OBJECT-TYPE
SYNTAX INTEGER { mip(1), mep(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service type of the request."
::= { mplsTpOAMDiscoveryResultEntry 2 }
oamDiscoveryResultMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service name of the request."
::= { mplsTpOAMDiscoveryResultEntry 3 }
oamDiscoveryResultICC OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ICC."
::= { mplsTpOAMDiscoveryResultEntry 4 }
oamDiscoveryResultNodeId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIP node id"
::= { mplsTpOAMDiscoveryResultEntry 5 }
oamDiscoveryResultIfNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface number."
::= { mplsTpOAMDiscoveryResultEntry 6 }
mplsTpOAMLoopbackRmepTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLoopbackRmepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls-tp discovery rmep."
::= { mpls 62 }
mplsTpOAMLoopbackRmepEntry OBJECT-TYPE
SYNTAX MplsTpOAMLoopbackRmepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpOAMLoopbackRmepTable."
INDEX { oamRmepIndex }
::= { mplsTpOAMLoopbackRmepTable 1 }
MplsTpOAMLoopbackRmepEntry ::=
SEQUENCE {
oamRmepIndex Integer32,
oamRmepServiceType INTEGER,
oamRmepServiceName OCTET STRING,
oamRmepId Integer32,
oamRmepMepIdTlv INTEGER,
oamRmepDataTlv Integer32,
oamRmepTimeout Integer32,
oamRmepRepeat Integer32,
oamRmepExp Integer32,
oamRmepRowstatus RowStatus,
oamRmepOperState INTEGER,
oamRmepTimeSpent Integer32,
oamRmepSuccessRate Integer32
}
oamRmepIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of oam rmep loopback request.Must be 1."
::= { mplsTpOAMLoopbackRmepEntry 1 }
oamRmepServiceType OBJECT-TYPE
SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of the request."
::= { mplsTpOAMLoopbackRmepEntry 2 }
oamRmepServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service name of the request."
::= { mplsTpOAMLoopbackRmepEntry 3 }
oamRmepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rmep id of the request."
::= { mplsTpOAMLoopbackRmepEntry 5 }
oamRmepMepIdTlv OBJECT-TYPE
SYNTAX INTEGER {request(1), no-request(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to request the mepid tlv for the request."
DEFVAL { no-request }
::= { mplsTpOAMLoopbackRmepEntry 6 }
oamRmepDataTlv OBJECT-TYPE
SYNTAX Integer32 (0..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to end."
DEFVAL { 0 }
::= { mplsTpOAMLoopbackRmepEntry 7 }
oamRmepTimeout OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to end."
DEFVAL { 5 }
::= { mplsTpOAMLoopbackRmepEntry 8 }
oamRmepRepeat OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Repeat count."
DEFVAL { 1 }
::= { mplsTpOAMLoopbackRmepEntry 9 }
oamRmepExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPLS exp."
DEFVAL { 7 }
::= { mplsTpOAMLoopbackRmepEntry 10 }
oamRmepRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpOAMLoopbackRmepEntry 15 }
oamRmepOperState OBJECT-TYPE
SYNTAX INTEGER { done(1), in-progress(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation status."
::= { mplsTpOAMLoopbackRmepEntry 16 }
oamRmepTimeSpent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time spent of the request, in ms."
::= { mplsTpOAMLoopbackRmepEntry 17 }
oamRmepSuccessRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The success rate of the request."
::= { mplsTpOAMLoopbackRmepEntry 18 }
mplsTpOAMLoopbackMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLoopbackMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls-tp discovery mip."
::= { mpls 64 }
mplsTpOAMLoopbackMipEntry OBJECT-TYPE
SYNTAX MplsTpOAMLoopbackMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpOAMLoopbackMipTable."
INDEX { oamMipIndex }
::= { mplsTpOAMLoopbackMipTable 1 }
MplsTpOAMLoopbackMipEntry ::=
SEQUENCE {
oamMipIndex Integer32,
oamMipServiceType INTEGER,
oamMipServiceName OCTET STRING,
oamMipTTL Integer32,
oamMipNodeId IpAddress,
oamMipMepIdTlv INTEGER,
oamMipDataTlv Integer32,
oamMipTimeout Integer32,
oamMipRepeat Integer32,
oamMipExp Integer32,
oamMipRowstatus RowStatus,
oamMipOperState INTEGER,
oamMipTimeSpent Integer32,
oamMipSuccessRate Integer32
}
oamMipIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of oam mip loopback request.Must be 1."
::= { mplsTpOAMLoopbackMipEntry 1 }
oamMipServiceType OBJECT-TYPE
SYNTAX INTEGER { lsp-pe(2), pw-tpe(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of the request."
::= { mplsTpOAMLoopbackMipEntry 2 }
oamMipServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service name of the request."
::= { mplsTpOAMLoopbackMipEntry 3 }
oamMipTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL to the target mip."
::= { mplsTpOAMLoopbackMipEntry 5 }
oamMipNodeId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mip node id."
::= { mplsTpOAMLoopbackMipEntry 6 }
oamMipMepIdTlv OBJECT-TYPE
SYNTAX INTEGER {request(1), no-request(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether to request the mepid tlv for the request."
DEFVAL { no-request }
::= { mplsTpOAMLoopbackMipEntry 7 }
oamMipDataTlv OBJECT-TYPE
SYNTAX Integer32 (0..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to end."
DEFVAL { 0 }
::= { mplsTpOAMLoopbackMipEntry 8 }
oamMipTimeout OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TTL number to end."
DEFVAL { 5 }
::= { mplsTpOAMLoopbackMipEntry 9 }
oamMipRepeat OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Repeat count."
DEFVAL { 1 }
::= { mplsTpOAMLoopbackMipEntry 10 }
oamMipExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MPLS exp."
DEFVAL { 7 }
::= { mplsTpOAMLoopbackMipEntry 11 }
oamMipRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpOAMLoopbackMipEntry 15 }
oamMipOperState OBJECT-TYPE
SYNTAX INTEGER { done(1), in-progress(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation status."
::= { mplsTpOAMLoopbackMipEntry 16 }
oamMipTimeSpent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time spent of the request, in ms."
::= { mplsTpOAMLoopbackMipEntry 17 }
oamMipSuccessRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The success rate of the request."
::= { mplsTpOAMLoopbackMipEntry 18 }
mplsTpOAM1dmRequestTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAM1dmRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls-tp 1dm request."
::= { mpls 65 }
mplsTpOAM1dmRequestEntry OBJECT-TYPE
SYNTAX MplsTpOAM1dmRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpOAM1dmRequestTable."
INDEX { oam1dmReqIndex }
::= { mplsTpOAM1dmRequestTable 1 }
MplsTpOAM1dmRequestEntry ::=
SEQUENCE {
oam1dmReqIndex Integer32,
oam1dmReqServiceType INTEGER,
oam1dmReqServiceName OCTET STRING,
oam1dmReqRepeat Integer32,
oam1dmReqExp Integer32,
oam1dmReqInterval INTEGER,
oam1dmReqRowstatus RowStatus,
oam1dmReqOperState INTEGER
}
oam1dmReqIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of oam 1dm request.Must be 1."
::= { mplsTpOAM1dmRequestEntry 1 }
oam1dmReqServiceType OBJECT-TYPE
SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of the request."
::= { mplsTpOAM1dmRequestEntry 2 }
oam1dmReqServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service name of the request."
::= { mplsTpOAM1dmRequestEntry 3 }
oam1dmReqRepeat OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Exp."
::= { mplsTpOAM1dmRequestEntry 5 }
oam1dmReqExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Exp."
::= { mplsTpOAM1dmRequestEntry 6 }
oam1dmReqInterval OBJECT-TYPE
SYNTAX INTEGER
{
one-hundred-ms(1),
one-sec(2),
ten-sec(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Interval."
DEFVAL { one-sec }
::= { mplsTpOAM1dmRequestEntry 7 }
oam1dmReqRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpOAM1dmRequestEntry 15 }
oam1dmReqOperState OBJECT-TYPE
SYNTAX INTEGER { done(1), in-progress(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation status."
::= { mplsTpOAM1dmRequestEntry 16 }
mplsTpOAMDmmRequestTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMDmmRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls-tp dmm request."
::= { mpls 67 }
mplsTpOAMDmmRequestEntry OBJECT-TYPE
SYNTAX MplsTpOAMDmmRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpOAMDmmRequestTable."
INDEX { oamDmmReqIndex }
::= { mplsTpOAMDmmRequestTable 1 }
MplsTpOAMDmmRequestEntry ::=
SEQUENCE {
oamDmmReqIndex Integer32,
oamDmmReqServiceType INTEGER,
oamDmmReqServiceName OCTET STRING,
oamDmmReqRepeat Integer32,
oamDmmReqExp Integer32,
oamDmmReqInterval INTEGER,
oamDmmReqRowstatus RowStatus,
oamDmmReqOperState INTEGER,
oamDmmReqSuccessRate Integer32,
oamDmmReqAverDelay Counter64,
oamDmmReqAverVar Counter64,
oamDmmReqMaxDelay Counter64,
oamDmmReqMinDelay Counter64
}
oamDmmReqIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of oam dmm request.Must be 1."
::= { mplsTpOAMDmmRequestEntry 1 }
oamDmmReqServiceType OBJECT-TYPE
SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of the request."
::= { mplsTpOAMDmmRequestEntry 2 }
oamDmmReqServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service name of the request."
::= { mplsTpOAMDmmRequestEntry 3 }
oamDmmReqRepeat OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Exp."
::= { mplsTpOAMDmmRequestEntry 5 }
oamDmmReqExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Exp."
::= { mplsTpOAMDmmRequestEntry 6 }
oamDmmReqInterval OBJECT-TYPE
SYNTAX INTEGER
{
one-hundred-ms(1),
one-sec(2),
ten-sec(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config Interval."
DEFVAL { one-sec }
::= { mplsTpOAMDmmRequestEntry 7 }
oamDmmReqRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpOAMDmmRequestEntry 15 }
oamDmmReqOperState OBJECT-TYPE
SYNTAX INTEGER { done(1), in-progress(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation status."
::= { mplsTpOAMDmmRequestEntry 16 }
oamDmmReqSuccessRate OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Success-rate of the operation."
::= { mplsTpOAMDmmRequestEntry 17 }
oamDmmReqAverDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average delay."
::= { mplsTpOAMDmmRequestEntry 18 }
oamDmmReqAverVar OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average variation."
::= { mplsTpOAMDmmRequestEntry 19 }
oamDmmReqMaxDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum delay."
::= { mplsTpOAMDmmRequestEntry 20 }
oamDmmReqMinDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum delay."
::= { mplsTpOAMDmmRequestEntry 21 }
mplsTpOAMDmmResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMDmmResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM Dmm Result table."
::= { mpls 68 }
mplsTpOAMDmmResultEntry OBJECT-TYPE
SYNTAX MplsTpOAMDmmResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP Dmm Result entries."
INDEX { mplsTpOAMDmmResultIndex }
::= { mplsTpOAMDmmResultTable 1 }
MplsTpOAMDmmResultEntry ::=
SEQUENCE {
mplsTpOAMDmmResultIndex Integer32,
mplsTpOAMDmmResultDelay Counter64,
mplsTpOAMDmmResultVariation Counter64,
mplsTpOAMDmmResultExp Integer32,
mplsTpOAMDmmResultTime OCTET STRING
}
mplsTpOAMDmmResultIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the entry."
::= { mplsTpOAMDmmResultEntry 1 }
mplsTpOAMDmmResultDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delay time."
::= { mplsTpOAMDmmResultEntry 2 }
mplsTpOAMDmmResultVariation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Variation."
::= { mplsTpOAMDmmResultEntry 3 }
mplsTpOAMDmmResultExp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action type."
::= { mplsTpOAMDmmResultEntry 4 }
mplsTpOAMDmmResultTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Event time."
::= { mplsTpOAMDmmResultEntry 5 }
mplsTpOAMResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM resource table."
::= { mpls 70 }
mplsTpOAMResourceEntry OBJECT-TYPE
SYNTAX MplsTpOAMResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-Tp resource rule entries."
INDEX { mplsTpOAMResourceId }
::= { mplsTpOAMResourceTable 1 }
MplsTpOAMResourceEntry ::=
SEQUENCE {
mplsTpOAMResourceId INTEGER,
mplsTpOAMResourceMax Integer32,
mplsTpOAMResourceCurrent Integer32
}
mplsTpOAMResourceId OBJECT-TYPE
SYNTAX INTEGER
{
section(1),
meg(2),
local-mep(3),
remote-mep(4),
mip(5),
csf(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Resource type."
::= { mplsTpOAMResourceEntry 1 }
mplsTpOAMResourceMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max resource number."
::= { mplsTpOAMResourceEntry 2 }
mplsTpOAMResourceCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current resource number."
::= { mplsTpOAMResourceEntry 3 }
mplsTpOAMStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM Statistic table."
::= { mpls 71 }
mplsTpOAMStatisticEntry OBJECT-TYPE
SYNTAX MplsTpOAMStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-Tp Statistic rule entries."
INDEX { mplsTpOAMStatisticPktType }
::= { mplsTpOAMStatisticTable 1 }
MplsTpOAMStatisticEntry ::=
SEQUENCE {
mplsTpOAMStatisticPktType INTEGER,
mplsTpOAMStatisticTx Integer32,
mplsTpOAMStatisticRx Integer32,
mplsTpOAMStatisticRxErr Integer32
}
mplsTpOAMStatisticPktType OBJECT-TYPE
SYNTAX INTEGER
{
lbm(1),
lbr(2),
ais(3),
one-dm(4),
dmm(5),
dmr(6),
unexp-cc(7),
unknown(8),
lck(9),
csf(10),
aps(11)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistic type."
::= { mplsTpOAMStatisticEntry 1 }
mplsTpOAMStatisticTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX packet number."
::= { mplsTpOAMStatisticEntry 2 }
mplsTpOAMStatisticRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX packet number."
::= { mplsTpOAMStatisticEntry 3 }
mplsTpOAMStatisticRxErr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RX error packet number."
::= { mplsTpOAMStatisticEntry 4 }
mplsTpOAMEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM Event table."
::= { mpls 72 }
mplsTpOAMEventEntry OBJECT-TYPE
SYNTAX MplsTpOAMEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP Event entries."
INDEX { mplsTpOAMEventIndex }
::= { mplsTpOAMEventTable 1 }
MplsTpOAMEventEntry ::=
SEQUENCE {
mplsTpOAMEventIndex Integer32,
mplsTpOAMEventService INTEGER,
mplsTpOAMEventMegId OCTET STRING,
mplsTpOAMEventMepId Integer32,
mplsTpOAMEventId INTEGER,
mplsTpOAMEventAction INTEGER,
mplsTpOAMEventTime OCTET STRING
}
mplsTpOAMEventIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event index."
::= { mplsTpOAMEventEntry 1 }
mplsTpOAMEventService OBJECT-TYPE
SYNTAX INTEGER
{
section(1),
lsp(2),
pw-tpe(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service type of the event."
::= { mplsTpOAMEventEntry 2 }
mplsTpOAMEventMegId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMEventEntry 3 }
mplsTpOAMEventMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MEP ID."
::= { mplsTpOAMEventEntry 4 }
mplsTpOAMEventId OBJECT-TYPE
SYNTAX INTEGER
{
loc(1),
unExpRMepId(2),
unExpInterval(3),
unExpMegId(4),
unExpLevel(5),
rdiRx(6),
rdiTx(7),
waitFistCCM(8),
aisRx(9),
aisTx(10),
aisDefect(11),
eventFull(12),
oneDmFull(13),
lockRx(14),
lockTx(15),
lockDefect(16),
crcDefect(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Event type."
::= { mplsTpOAMEventEntry 5 }
mplsTpOAMEventAction OBJECT-TYPE
SYNTAX INTEGER
{
occur(1),
clear(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action type."
::= { mplsTpOAMEventEntry 6 }
mplsTpOAMEventTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Event time."
::= { mplsTpOAMEventEntry 7 }
mplsTpOAM1dmTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAM1dmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM 1dm table."
::= { mpls 73 }
mplsTpOAM1dmEntry OBJECT-TYPE
SYNTAX MplsTpOAM1dmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP 1dm entries."
INDEX { mplsTpOAM1dmMegId, mplsTpOAM1dmIndex }
::= { mplsTpOAM1dmTable 1 }
MplsTpOAM1dmEntry ::=
SEQUENCE {
mplsTpOAM1dmMegId OCTET STRING,
mplsTpOAM1dmIndex Integer32,
mplsTpOAM1dmService INTEGER,
mplsTpOAM1dmMepId Integer32,
mplsTpOAM1dmDelay Counter64,
mplsTpOAM1dmVariation Counter64,
mplsTpOAM1dmExp Integer32,
mplsTpOAM1dmTime OCTET STRING
}
mplsTpOAM1dmMegId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAM1dmEntry 1 }
mplsTpOAM1dmIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the entry."
::= { mplsTpOAM1dmEntry 2 }
mplsTpOAM1dmService OBJECT-TYPE
SYNTAX INTEGER
{
section(1),
lsp(2),
pw-tpe(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service type of the data."
::= { mplsTpOAM1dmEntry 3 }
mplsTpOAM1dmMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MEP ID."
::= { mplsTpOAM1dmEntry 4 }
mplsTpOAM1dmDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delay time."
::= { mplsTpOAM1dmEntry 5 }
mplsTpOAM1dmVariation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Variation."
::= { mplsTpOAM1dmEntry 6 }
mplsTpOAM1dmExp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action type."
::= { mplsTpOAM1dmEntry 7 }
mplsTpOAM1dmTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Event time."
::= { mplsTpOAM1dmEntry 8 }
mplsTpOAM1dmStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAM1dmStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM 1dm statistic table."
::= { mpls 74 }
mplsTpOAM1dmStatisticEntry OBJECT-TYPE
SYNTAX MplsTpOAM1dmStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP 1dm statistic entries."
INDEX { mplsTpOAM1dmStatMegId }
::= { mplsTpOAM1dmStatisticTable 1 }
MplsTpOAM1dmStatisticEntry ::=
SEQUENCE {
mplsTpOAM1dmStatMegId OCTET STRING,
mplsTpOAM1dmStatMinDelay Counter64,
mplsTpOAM1dmStatMaxDelay Counter64,
mplsTpOAM1dmStatAverDelay Counter64,
mplsTpOAM1dmStatAverVariation Counter64
}
mplsTpOAM1dmStatMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAM1dmStatisticEntry 1 }
mplsTpOAM1dmStatMinDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum delay time."
::= { mplsTpOAM1dmStatisticEntry 2 }
mplsTpOAM1dmStatMaxDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum delay time."
::= { mplsTpOAM1dmStatisticEntry 3 }
mplsTpOAM1dmStatAverDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average delay time."
::= { mplsTpOAM1dmStatisticEntry 4 }
mplsTpOAM1dmStatAverVariation OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average variation."
::= { mplsTpOAM1dmStatisticEntry 5 }
mplsTpOAMMPStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMMPStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM MEP and MIP Statistic table."
::= { mpls 75 }
mplsTpOAMMPStatisticEntry OBJECT-TYPE
SYNTAX MplsTpOAMMPStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-Tp MP Statistic entries."
INDEX { mplsTpOAMMPStatMegId, mplsTpOAMMPStatPktType }
::= { mplsTpOAMMPStatisticTable 1 }
MplsTpOAMMPStatisticEntry ::=
SEQUENCE {
mplsTpOAMMPStatMegId OCTET STRING,
mplsTpOAMMPStatPktType INTEGER,
mplsTpOAMMPStatTx Counter64,
mplsTpOAMMPStatRx Counter64,
mplsTpOAMMPStatRxErr Counter64
}
mplsTpOAMMPStatMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMMPStatisticEntry 1 }
mplsTpOAMMPStatPktType OBJECT-TYPE
SYNTAX INTEGER
{
lbm(1),
lbr(2),
ais(3),
one-dm(4),
dmm(5),
dmr(6),
unexp-cc(7),
unknown(8),
lck(9),
csf(10),
aps(11)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Packet type."
::= { mplsTpOAMMPStatisticEntry 2 }
mplsTpOAMMPStatTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tx packet number."
::= { mplsTpOAMMPStatisticEntry 3 }
mplsTpOAMMPStatRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx packet number."
::= { mplsTpOAMMPStatisticEntry 4 }
mplsTpOAMMPStatRxErr OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx error packet number."
::= { mplsTpOAMMPStatisticEntry 5 }
mplsTpOAMMepEventDefectTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMMepEventDefectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM MEP event defect table."
::= { mpls 76 }
mplsTpOAMMepEventDefectEntry OBJECT-TYPE
SYNTAX MplsTpOAMMepEventDefectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-Tp MEP event defect entries."
INDEX { mplsTpOAMMepEvtMegId, mplsTpOAMMepEvtId }
::= { mplsTpOAMMepEventDefectTable 1 }
MplsTpOAMMepEventDefectEntry ::=
SEQUENCE {
mplsTpOAMMepEvtMegId OCTET STRING,
mplsTpOAMMepEvtId INTEGER,
mplsTpOAMMepEvtDefect INTEGER
}
mplsTpOAMMepEvtMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMMepEventDefectEntry 1 }
mplsTpOAMMepEvtId OBJECT-TYPE
SYNTAX INTEGER
{
loc(1),
unExpRMepId(2),
unExpInterval(3),
unExpMegId(4),
unExpLevel(5),
rdiRx(6),
rdiTx(7),
waitFistCCM(8),
aisRx(9),
aisTx(10),
aisDefect(11),
eventFull(12),
oneDmFull(13),
lockRx(14),
lockTx(15),
lockDefect(16),
crcDefect(17)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event type."
::= { mplsTpOAMMepEventDefectEntry 2 }
mplsTpOAMMepEvtDefect OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Event status."
::= { mplsTpOAMMepEventDefectEntry 3 }
mplsTPVpwsOAMCsfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTPVpwsOAMCsfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Display OAM csf status of an MPLS Layer-2 Virtual Circuit."
::= { mpls 77 }
mplsTPVpwsOAMCsfEntry OBJECT-TYPE
SYNTAX MplsTPVpwsOAMCsfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTPVpwsOAMCsfTable."
INDEX { mplsTPVpwsOAMCsfVcId}
::= { mplsTPVpwsOAMCsfTable 1 }
MplsTPVpwsOAMCsfEntry ::=
SEQUENCE {
mplsTPVpwsOAMCsfVcId Integer32,
mplsTPVpwsOAMCsfSrvState INTEGER,
mplsTPVpwsOAMCsfClientState INTEGER,
mplsTPVpwsOAMCsfDCReason INTEGER,
mplsTPVpwsOAMCsfClientInterval Integer32,
mplsTPVpwsOAMCsfACDownEn INTEGER,
mplsTPVpwsOAMCsfACStatus INTEGER,
mplsTPVpwsOAMCsfTxCSFPacket INTEGER
}
mplsTPVpwsOAMCsfVcId OBJECT-TYPE
SYNTAX Integer32(1..424967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for MPLS Layer-2 Virtual Circuit."
::= { mplsTPVpwsOAMCsfEntry 1 }
mplsTPVpwsOAMCsfSrvState OBJECT-TYPE
SYNTAX INTEGER { los(0), fdi(1), rdi(2), ok(3), init(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Csf Local AC state."
::= { mplsTPVpwsOAMCsfEntry 2 }
mplsTPVpwsOAMCsfClientState OBJECT-TYPE
SYNTAX INTEGER { los(0), fdi(1), rdi(2), dc(3), init(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Csf Remote AC state."
::= { mplsTPVpwsOAMCsfEntry 3 }
mplsTPVpwsOAMCsfDCReason OBJECT-TYPE
SYNTAX INTEGER { init(0), timeout(1), dci(2), invalid(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Csf DC reason."
::= { mplsTPVpwsOAMCsfEntry 4 }
mplsTPVpwsOAMCsfClientInterval OBJECT-TYPE
SYNTAX Integer32 (0|1|60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval of CSF client PDU, 0 is invalid."
::= { mplsTPVpwsOAMCsfEntry 5 }
mplsTPVpwsOAMCsfACDownEn OBJECT-TYPE
SYNTAX INTEGER { disable(0), down(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When receive csf packet, set AC port down. 1 is set AC port to down."
::= { mplsTPVpwsOAMCsfEntry 6 }
mplsTPVpwsOAMCsfACStatus OBJECT-TYPE
SYNTAX INTEGER { up(0), down(1), admin-down(2), errdisable(3), csf-ac-down(4), absent(5) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC interface status."
::= { mplsTPVpwsOAMCsfEntry 7 }
mplsTPVpwsOAMCsfTxCSFPacket OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX CSF packet status."
::= { mplsTPVpwsOAMCsfEntry 8 }
mplsVplsDynamicFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsDynamicFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vpls dynamic fdb table."
::= { mpls 78 }
mplsVplsDynamicFdbEntry OBJECT-TYPE
SYNTAX MplsVplsDynamicFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPLS dynamic fdb entries."
INDEX { mplsVplsDynamicFdbVplsId, mplsVplsDynamicFdbMacAddr}
::= { mplsVplsDynamicFdbTable 1 }
MplsVplsDynamicFdbEntry ::=
SEQUENCE {
mplsVplsDynamicFdbVplsId Integer32,
mplsVplsDynamicFdbMacAddr MacAddress,
mplsVplsDynamicFdbIfName OCTET STRING,
mplsVplsDynamicFdbPeerIp IpAddress,
mplsVplsDynamicFdbTPPeerName OCTET STRING
}
mplsVplsDynamicFdbVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsDynamicFdbEntry 1 }
mplsVplsDynamicFdbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mac address of the fdb entry."
::= { mplsVplsDynamicFdbEntry 2 }
mplsVplsDynamicFdbIfName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out-going interface of the VPLS fdb entry."
::= { mplsVplsDynamicFdbEntry 3 }
mplsVplsDynamicFdbPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out-going peer IPV4 address of the VPLS fdb entry."
::= { mplsVplsDynamicFdbEntry 4 }
mplsVplsDynamicFdbTPPeerName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out-going tp-peer of the VPLS fdb entry."
::= { mplsVplsDynamicFdbEntry 5 }
mplsGlobal OBJECT IDENTIFIER ::= { mpls 79 }
mplsGlobalCurrentStaticLabelBlockNum OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get current static label block number."
::= { mplsGlobal 1 }
mplsGlobalCurrentDynamicLabelBlockNum OBJECT-TYPE
SYNTAX Integer32 (0..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get current dynamic label block number."
::= { mplsGlobal 2 }
mplsGlobalConfigStaticLabelBlockNum OBJECT-TYPE
SYNTAX Integer32 (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get static label block number configured for next reboot,
configure static label block number for next reboot."
::= { mplsGlobal 3 }
mplsVplsIgspGlbInfo OBJECT IDENTIFIER ::= { mpls 80 }
mplsVplsIgspGlbInfoMaxMemNum OBJECT-TYPE
SYNTAX Integer32 (1..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vpls IGMP Snooping Max Member Number."
DEFVAL { 16384 }
::= { mplsVplsIgspGlbInfo 1 }
mplsVplsIgspGlbInfoQuerierTcnCnt OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vpls IGMP querier TCN query count."
DEFVAL { 2 }
::= { mplsVplsIgspGlbInfo 2 }
mplsVplsIgspGlbInfoQuerierTcnInterval OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vpls IGMP querier TCN query interval."
DEFVAL { 10 }
::= { mplsVplsIgspGlbInfo 3 }
mplsVplsIgspGlbInfoCurrMemNum OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls IGMP snooping current member number."
DEFVAL { 0 }
::= { mplsVplsIgspGlbInfo 4 }
mplsVplsIgspCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsIgspCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vpls igmp snooping config table."
::= { mpls 81 }
mplsVplsIgspCfgEntry OBJECT-TYPE
SYNTAX MplsVplsIgspCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsIgspCfgTable."
INDEX { mplsVplsIgspVplsId }
::= { mplsVplsIgspCfgTable 1 }
MplsVplsIgspCfgEntry ::=
SEQUENCE {
mplsVplsIgspVplsId
Integer32,
mplsVplsIgspStatus
INTEGER,
mplsVplsIgspFastLeave
INTEGER,
mplsVplsIgspVersion
Integer32,
mplsVplsIgspMaxMemNum
Integer32,
mplsVplsIgspReportSuppr
INTEGER,
mplsVplsIgspLastMemQueryCnt
Integer32,
mplsVplsIgspLastMemQueryInteval
Integer32,
mplsVplsIgspRobuVari
Integer32,
mplsVplsIgspAccessGroup
OCTET STRING,
mplsVplsIgspQuerierStatus
INTEGER,
mplsVplsIgspQuerierTimeout
Integer32,
mplsVplsIgspQuerierAdd
IpAddress,
mplsVplsIgspQueryInterval
Integer32,
mplsVplsIgspQueryMaxResponTime
Integer32,
mplsVplsIgspElectedQuerier
IpAddress,
mplsVplsIgspQueryOperationalState
INTEGER,
mplsVplsIgspBundingCtrlVlan
Integer32
}
mplsVplsIgspVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
DEFVAL { 0 }
::= { mplsVplsIgspCfgEntry 1 }
mplsVplsIgspStatus OBJECT-TYPE
SYNTAX INTEGER
{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable or disable VPLS IGMP Snooping."
::= { mplsVplsIgspCfgEntry 2 }
mplsVplsIgspFastLeave OBJECT-TYPE
SYNTAX INTEGER
{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable VPLS IGMP Snooping Fast Leave."
::= { mplsVplsIgspCfgEntry 3 }
mplsVplsIgspVersion OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set VPLS IGMP Snooping Version."
DEFVAL { 2 }
::= { mplsVplsIgspCfgEntry 4 }
mplsVplsIgspMaxMemNum OBJECT-TYPE
SYNTAX Integer32 (1..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS IGMP Snooping Max Member Number."
DEFVAL { 16384 }
::= { mplsVplsIgspCfgEntry 5 }
mplsVplsIgspReportSuppr OBJECT-TYPE
SYNTAX INTEGER
{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS IGMPv1/V2 Report Suppression."
::= { mplsVplsIgspCfgEntry 6 }
mplsVplsIgspLastMemQueryCnt OBJECT-TYPE
SYNTAX Integer32 (2..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last Member Query Count value."
DEFVAL { 2 }
::= { mplsVplsIgspCfgEntry 7 }
mplsVplsIgspLastMemQueryInteval OBJECT-TYPE
SYNTAX Integer32 (1000..25500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last Member Query Interval value."
DEFVAL { 1000 }
::= { mplsVplsIgspCfgEntry 8 }
mplsVplsIgspRobuVari OBJECT-TYPE
SYNTAX Integer32 (2..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Robustness Variable value."
DEFVAL { 2 }
::= { mplsVplsIgspCfgEntry 9 }
mplsVplsIgspAccessGroup OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Named Standard Access list."
::= { mplsVplsIgspCfgEntry 10 }
mplsVplsIgspQuerierStatus OBJECT-TYPE
SYNTAX INTEGER
{enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable Vpls IGMP Snooping Query."
::= { mplsVplsIgspCfgEntry 11 }
mplsVplsIgspQuerierTimeout OBJECT-TYPE
SYNTAX Integer32 (60..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vpls IGMP previous querier timeout value."
DEFVAL { 255 }
::= { mplsVplsIgspCfgEntry 12 }
mplsVplsIgspQuerierAdd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vpls IGMP Querier IP Address."
::= { mplsVplsIgspCfgEntry 13 }
mplsVplsIgspQueryInterval OBJECT-TYPE
SYNTAX Integer32 (2..18000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS Igmp snooping Query Interval value."
DEFVAL { 125 }
::= { mplsVplsIgspCfgEntry 14 }
mplsVplsIgspQueryMaxResponTime OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VPLS IGMP Max Query Response Time."
DEFVAL { 10 }
::= { mplsVplsIgspCfgEntry 15 }
mplsVplsIgspElectedQuerier OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls IGMP Elected Querier IP Address."
::= { mplsVplsIgspCfgEntry 16 }
mplsVplsIgspQueryOperationalState OBJECT-TYPE
SYNTAX INTEGER
{querier(1), non-querier(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPLS IGMP Querier Operational State."
::= { mplsVplsIgspCfgEntry 17 }
mplsVplsIgspBundingCtrlVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to set VPLS IGMP Snooping Bunding Control Vlan.
Set 0 means bundling-control-vlan untag."
DEFVAL { 1 }
::= { mplsVplsIgspCfgEntry 18 }
mplsVplsIgspMrouterIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsIgspMrouterIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vpls IGMP snooping Multicast Router Interface table."
::= { mpls 82 }
mplsVplsIgspMrouterIfEntry OBJECT-TYPE
SYNTAX MplsVplsIgspMrouterIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsIgspMrouterIfTable."
INDEX { mplsVplsIgspMrouterIfVplsId , mplsVplsIgspMrouterIfIndex }
::= { mplsVplsIgspMrouterIfTable 1 }
MplsVplsIgspMrouterIfEntry ::=
SEQUENCE {
mplsVplsIgspMrouterIfVplsId
Integer32,
mplsVplsIgspMrouterIfIndex
Integer32,
mplsVplsIgspMrouterIfRowstatus
RowStatus
}
mplsVplsIgspMrouterIfVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsIgspMrouterIfEntry 1 }
mplsVplsIgspMrouterIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of interface."
::= { mplsVplsIgspMrouterIfEntry 2 }
mplsVplsIgspMrouterIfRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { mplsVplsIgspMrouterIfEntry 10 }
mplsVplsMrouterPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsMrouterPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP VPLS peer Multicast Router Table."
::= { mpls 83 }
mplsVplsMrouterPeerEntry OBJECT-TYPE
SYNTAX MplsVplsMrouterPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsMrouterPeerTable."
INDEX { mplsVplsMrouterPeerVplsId , mplsVplsMrouterPeer }
::= { mplsVplsMrouterPeerTable 1 }
MplsVplsMrouterPeerEntry ::=
SEQUENCE {
mplsVplsMrouterPeerVplsId
Integer32,
mplsVplsMrouterPeer
OCTET STRING,
mplsVplsMrouterPeerRowstatus
RowStatus
}
mplsVplsMrouterPeerVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsMrouterPeerEntry 1 }
mplsVplsMrouterPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying string for VPLS peer."
::= { mplsVplsMrouterPeerEntry 2 }
mplsVplsMrouterPeerRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { mplsVplsMrouterPeerEntry 10 }
mplsVplsIgspSgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsIgspSgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Vpls igmp snooping Static Group Interface Table."
::= { mpls 84 }
mplsVplsIgspSgIfEntry OBJECT-TYPE
SYNTAX MplsVplsIgspSgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsIgspStaticGroupIfTable"
INDEX { mplsVplsIgspSgIfVplsId ,
mplsVplsIgspSgIfMadd ,
mplsVplsIgspSgIfIndex,
mplsVplsIgspSgIfSourceAdd }
::= { mplsVplsIgspSgIfTable 1 }
MplsVplsIgspSgIfEntry ::=
SEQUENCE {
mplsVplsIgspSgIfVplsId
Integer32,
mplsVplsIgspSgIfMadd
IpAddress,
mplsVplsIgspSgIfIndex
Integer32,
mplsVplsIgspSgIfSourceAdd
IpAddress,
mplsVplsIgspSgIfRowstatus
RowStatus
}
mplsVplsIgspSgIfVplsId OBJECT-TYPE
SYNTAX Integer32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsIgspSgIfEntry 1 }
mplsVplsIgspSgIfMadd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Address to be Joined Static Group."
::= { mplsVplsIgspSgIfEntry 2 }
mplsVplsIgspSgIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of interface."
::= { mplsVplsIgspSgIfEntry 3 }
mplsVplsIgspSgIfSourceAdd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static Source to be Joined Static Group."
::= { mplsVplsIgspSgIfEntry 4 }
mplsVplsIgspSgIfRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { mplsVplsIgspSgIfEntry 10 }
mplsVplsIgspSgPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsIgspSgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Igsp Static Group Table of MPLS-TP VPLS peer."
::= { mpls 85 }
mplsVplsIgspSgPeerEntry OBJECT-TYPE
SYNTAX MplsVplsIgspSgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsIgspStaticGroupPeerTable."
INDEX { mplsVplsIgspSgPeerVplsId ,
mplsVplsIgspSgPeerMadd ,
mplsVplsIgspSgPeer,
mplsVplsIgspSgPeerSourceAdd}
::= { mplsVplsIgspSgPeerTable 1 }
MplsVplsIgspSgPeerEntry ::=
SEQUENCE {
mplsVplsIgspSgPeerVplsId
Integer32,
mplsVplsIgspSgPeerMadd
IpAddress,
mplsVplsIgspSgPeer
OCTET STRING,
mplsVplsIgspSgPeerSourceAdd
IpAddress,
mplsVplsIgspSgPeerRowstatus
RowStatus
}
mplsVplsIgspSgPeerVplsId OBJECT-TYPE
SYNTAX Integer32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsIgspSgPeerEntry 1 }
mplsVplsIgspSgPeerMadd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Multicast Address to be Joined Static Group."
::= { mplsVplsIgspSgPeerEntry 2 }
mplsVplsIgspSgPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying string for VPLS peer."
::= { mplsVplsIgspSgPeerEntry 3 }
mplsVplsIgspSgPeerSourceAdd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static Source to be Joined Static Group."
::= { mplsVplsIgspSgPeerEntry 4 }
mplsVplsIgspSgPeerRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { mplsVplsIgspSgPeerEntry 10 }
mplsVplsIgspMaxGrpMemIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsIgspMaxGrpMemIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vpls IGMP snooping Max Group Member Interface table."
::= { mpls 86 }
mplsVplsIgspMaxGrpMemIfEntry OBJECT-TYPE
SYNTAX MplsVplsIgspMaxGrpMemIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsIgspMaxGrpMemIfTable."
INDEX { mplsVplsIgspMaxGrpMemIfVplsId , mplsVplsIgspMaxGrpMemIfIndex }
::= { mplsVplsIgspMaxGrpMemIfTable 1 }
MplsVplsIgspMaxGrpMemIfEntry ::=
SEQUENCE {
mplsVplsIgspMaxGrpMemIfVplsId
Integer32,
mplsVplsIgspMaxGrpMemIfIndex
Integer32,
mplsVplsIgspIfMaxGrpMemNum
Integer32,
mplsVplsIgspMaxGrpMemIfRowstatus
RowStatus,
mplsVplsIgspIfMaxGrpMemCount
Integer32
}
mplsVplsIgspMaxGrpMemIfVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsIgspMaxGrpMemIfEntry 1 }
mplsVplsIgspMaxGrpMemIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of interface."
::= { mplsVplsIgspMaxGrpMemIfEntry 2 }
mplsVplsIgspIfMaxGrpMemNum OBJECT-TYPE
SYNTAX Integer32 (0..16384)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IGMP Snooping Max Allowed Group Number on this interface."
::= { mplsVplsIgspMaxGrpMemIfEntry 3 }
mplsVplsIgspMaxGrpMemIfRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { mplsVplsIgspMaxGrpMemIfEntry 10 }
mplsVplsIgspIfMaxGrpMemCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGMP Snooping Max Group Number Count on this interface."
::= { mplsVplsIgspMaxGrpMemIfEntry 11 }
mplsVplsMaxGrpMemPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsMaxGrpMemPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP VPLS peer Multicast Router Table."
::= { mpls 87 }
mplsVplsMaxGrpMemPeerEntry OBJECT-TYPE
SYNTAX MplsVplsMaxGrpMemPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsMaxGrpMemPeerTable."
INDEX { mplsVplsMaxGrpMemPeerVplsId , mplsVplsMaxGrpMemPeer }
::= { mplsVplsMaxGrpMemPeerTable 1 }
MplsVplsMaxGrpMemPeerEntry ::=
SEQUENCE {
mplsVplsMaxGrpMemPeerVplsId
Integer32,
mplsVplsMaxGrpMemPeer
OCTET STRING,
mplsVplsPeerMaxGrpMemNum
Integer32,
mplsVplsMaxGrpMemPeerRowstatus
RowStatus,
mplsVplsPeerMaxGrpMemCount
Integer32
}
mplsVplsMaxGrpMemPeerVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsMaxGrpMemPeerEntry 1 }
mplsVplsMaxGrpMemPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying string for VPLS peer."
::= { mplsVplsMaxGrpMemPeerEntry 2 }
mplsVplsPeerMaxGrpMemNum OBJECT-TYPE
SYNTAX Integer32 (0..16384)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IGMP Snooping Max Allowed Group Number on this peer."
::= { mplsVplsMaxGrpMemPeerEntry 3 }
mplsVplsMaxGrpMemPeerRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { mplsVplsMaxGrpMemPeerEntry 10 }
mplsVplsPeerMaxGrpMemCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGMP Snooping Max Group Number Count on this peer."
::= { mplsVplsMaxGrpMemPeerEntry 11 }
mplsVplsShowMrouterIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsShowMrouterIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vpls IGMP snooping Multicast Router Show Interface table."
::= { mpls 88 }
mplsVplsShowMrouterIfEntry OBJECT-TYPE
SYNTAX MplsVplsShowMrouterIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsShowMrouterIfTable."
INDEX { mplsVplsShowMrouterIfVplsId , mplsVplsShowMrouterIfIndex }
::= { mplsVplsShowMrouterIfTable 1 }
MplsVplsShowMrouterIfEntry ::=
SEQUENCE {
mplsVplsShowMrouterIfVplsId
Integer32,
mplsVplsShowMrouterIfIndex
Integer32,
mplsVplsShowMrouterIfName
OCTET STRING,
mplsVplsShowMrouterIfMode
INTEGER,
mplsVplsShowMrouterIfUptime
OCTET STRING,
mplsVplsShowMrouterIfExprietime
OCTET STRING
}
mplsVplsShowMrouterIfVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsShowMrouterIfEntry 1 }
mplsVplsShowMrouterIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of interface."
::= { mplsVplsShowMrouterIfEntry 2 }
mplsVplsShowMrouterIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name of Interface."
::= { mplsVplsShowMrouterIfEntry 3 }
mplsVplsShowMrouterIfMode OBJECT-TYPE
SYNTAX INTEGER
{static(1), dynamic(2), both(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mode of VPLS Igmp Snooping Mrouter on this Interface."
::= { mplsVplsShowMrouterIfEntry 4 }
mplsVplsShowMrouterIfUptime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Uptime of VPLS Igmp Snooping Mrouter on this Interface."
::= { mplsVplsShowMrouterIfEntry 5 }
mplsVplsShowMrouterIfExprietime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Exprietime of VPLS Igmp Snooping Mrouter on this Interface."
::= { mplsVplsShowMrouterIfEntry 6 }
mplsVplsShowMrouterPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsShowMrouterPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vpls IGMP snooping Multicast Router Show Peer Table."
::= { mpls 89 }
mplsVplsShowMrouterPeerEntry OBJECT-TYPE
SYNTAX MplsVplsShowMrouterPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsShowMrouterPeerTable."
INDEX { mplsVplsShowMrouterPeerVplsId , mplsVplsShowMrouterPeer }
::= { mplsVplsShowMrouterPeerTable 1 }
MplsVplsShowMrouterPeerEntry ::=
SEQUENCE {
mplsVplsShowMrouterPeerVplsId
Integer32,
mplsVplsShowMrouterPeer
OCTET STRING,
mplsVplsShowMrouterPeerName
OCTET STRING,
mplsVplsShowMrouterPeerMode
INTEGER,
mplsVplsShowMrouterPeerUptime
OCTET STRING,
mplsVplsShowMrouterPeerExprietime
OCTET STRING
}
mplsVplsShowMrouterPeerVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsShowMrouterPeerEntry 1 }
mplsVplsShowMrouterPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying string for VPLS peer."
::= { mplsVplsShowMrouterPeerEntry 2 }
mplsVplsShowMrouterPeerName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name of peer."
::= { mplsVplsShowMrouterPeerEntry 3 }
mplsVplsShowMrouterPeerMode OBJECT-TYPE
SYNTAX INTEGER
{static(1), dynamic(2), both(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mode of VPLS Igmp Snooping Mrouter on this peer."
::= { mplsVplsShowMrouterPeerEntry 4 }
mplsVplsShowMrouterPeerUptime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Uptime of VPLS Igmp Snooping Mrouter on this peer."
::= { mplsVplsShowMrouterPeerEntry 5 }
mplsVplsShowMrouterPeerExprietime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Exprietime of VPLS Igmp Snooping Mrouter on this peer."
::= { mplsVplsShowMrouterPeerEntry 6 }
mplsVplsShowGroupIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsShowGroupIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vpls IGMP snooping Show Groups Interface table."
::= { mpls 90 }
mplsVplsShowGroupIfEntry OBJECT-TYPE
SYNTAX MplsVplsShowGroupIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsShowGroupIfTable."
INDEX { mplsVplsShowGroupIfVplsId , mplsVplsShowGroupIfIndex ,mplsVplsShowGroupIfAddr}
::= { mplsVplsShowGroupIfTable 1 }
MplsVplsShowGroupIfEntry ::=
SEQUENCE {
mplsVplsShowGroupIfVplsId
Integer32,
mplsVplsShowGroupIfIndex
Integer32,
mplsVplsShowGroupIfAddr
IpAddress,
mplsVplsShowGroupIfName
OCTET STRING,
mplsVplsShowGroupIfUptime
OCTET STRING,
mplsVplsShowGroupIfExprietime
OCTET STRING,
mplsVplsShowGroupIfLastReporter
IpAddress
}
mplsVplsShowGroupIfVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsShowGroupIfEntry 1 }
mplsVplsShowGroupIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of interface."
::= { mplsVplsShowGroupIfEntry 2 }
mplsVplsShowGroupIfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Group Address of VPLS Igmp Snooping Group on this Interface."
::= { mplsVplsShowGroupIfEntry 3 }
mplsVplsShowGroupIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name of Interface."
::= { mplsVplsShowGroupIfEntry 4 }
mplsVplsShowGroupIfUptime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Uptime of VPLS Igmp Snooping Group on this Interface."
::= { mplsVplsShowGroupIfEntry 5 }
mplsVplsShowGroupIfExprietime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Exprietime of VPLS Igmp Snooping Group on this Interface."
::= { mplsVplsShowGroupIfEntry 6 }
mplsVplsShowGroupIfLastReporter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Address of VPLS Igmp Snooping Group Last Reporter on this Interface."
::= { mplsVplsShowGroupIfEntry 7 }
mplsVplsShowGroupPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVplsShowGroupPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vpls IGMP snooping Show Group Peer Table."
::= { mpls 91 }
mplsVplsShowGroupPeerEntry OBJECT-TYPE
SYNTAX MplsVplsShowGroupPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsVplsShowGroupPeerTable."
INDEX { mplsVplsShowGroupPeerVplsId , mplsVplsShowGroupPeer ,mplsVplsShowGroupPeerAddr }
::= { mplsVplsShowGroupPeerTable 1 }
MplsVplsShowGroupPeerEntry ::=
SEQUENCE {
mplsVplsShowGroupPeerVplsId
Integer32,
mplsVplsShowGroupPeer
OCTET STRING,
mplsVplsShowGroupPeerAddr
IpAddress,
mplsVplsShowGroupPeerName
OCTET STRING,
mplsVplsShowGroupPeerUptime
OCTET STRING,
mplsVplsShowGroupPeerExprietime
OCTET STRING,
mplsVplsShowGroupPeerLastReporter
IpAddress
}
mplsVplsShowGroupPeerVplsId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying value for VPLS."
::= { mplsVplsShowGroupPeerEntry 1 }
mplsVplsShowGroupPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying string for VPLS peer."
::= { mplsVplsShowGroupPeerEntry 2 }
mplsVplsShowGroupPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Group Address of VPLS Igmp Snooping Group on this peer."
::= { mplsVplsShowGroupPeerEntry 3 }
mplsVplsShowGroupPeerName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name of peer."
::= { mplsVplsShowGroupPeerEntry 4 }
mplsVplsShowGroupPeerUptime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Uptime of VPLS Igmp Snooping Group on this peer."
::= { mplsVplsShowGroupPeerEntry 5 }
mplsVplsShowGroupPeerExprietime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..27))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Exprietime of VPLS Igmp Snooping Group on this peer."
::= { mplsVplsShowGroupPeerEntry 6 }
mplsVplsShowGroupPeerLastReporter OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Address of VPLS Igmp Snooping Group Last Reporter on this peer."
::= { mplsVplsShowGroupPeerEntry 7 }
mplsInterfaceMplsVpwsPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInterfaceMplsVpwsPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One MPLS layer-2 virtual circuit can only band to one interface,
but one interface may be banded to many VCs."
::= { mpls 92 }
mplsInterfaceMplsVpwsPolicyEntry OBJECT-TYPE
SYNTAX MplsInterfaceMplsVpwsPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsInterfaceMplsVpwsPolicyTable."
INDEX { mplsInterfaceMplsVpwsPolicyIfIndex}
::= { mplsInterfaceMplsVpwsPolicyTable 1 }
MplsInterfaceMplsVpwsPolicyEntry ::=
SEQUENCE {
mplsInterfaceMplsVpwsPolicyIfIndex Integer32,
mplsInterfaceMplsVpwsPolicyVcName OCTET STRING,
mplsInterfaceMplsVpwsPolicyName OCTET STRING,
mplsInterfaceMplsVpwsPolicyStatis INTEGER,
mplsInterfaceMplsVpwsPolicyRowStatus RowStatus
}
mplsInterfaceMplsVpwsPolicyIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index."
::= { mplsInterfaceMplsVpwsPolicyEntry 1 }
mplsInterfaceMplsVpwsPolicyVcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifying string for MPLS layer-2 virtual circuit."
::= { mplsInterfaceMplsVpwsPolicyEntry 2 }
mplsInterfaceMplsVpwsPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy map name."
::= { mplsInterfaceMplsVpwsPolicyEntry 3 }
mplsInterfaceMplsVpwsPolicyStatis OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"State of bundling."
DEFVAL { disable }
::= { mplsInterfaceMplsVpwsPolicyEntry 4 }
mplsInterfaceMplsVpwsPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active."
::= { mplsInterfaceMplsVpwsPolicyEntry 10 }
mplsTpOAMLmmTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLmmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mpls-tp Single-ended loss measurment message."
::= { mpls 93 }
mplsTpOAMLmmEntry OBJECT-TYPE
SYNTAX MplsTpOAMLmmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of mplsTpOAMLmmTable."
INDEX { oamLmmIndex }
::= { mplsTpOAMLmmTable 1 }
MplsTpOAMLmmEntry ::=
SEQUENCE {
oamLmmIndex Integer32,
oamLmmServiceType INTEGER,
oamLmmServiceName OCTET STRING,
oamLmmRepeat Integer32,
oamLmmInterval INTEGER,
oamLmmRowstatus RowStatus
}
oamLmmIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of oam Single-ended loss measurment message.Must be 1."
::= { mplsTpOAMLmmEntry 1 }
oamLmmServiceType OBJECT-TYPE
SYNTAX INTEGER { section(1), lsp-pe(2), pw-tpe(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of the message."
::= { mplsTpOAMLmmEntry 2 }
oamLmmServiceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service name of the message."
::= { mplsTpOAMLmmEntry 3 }
oamLmmRepeat OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Repeat count value to Single-ended loss measurment message."
::= { mplsTpOAMLmmEntry 4 }
oamLmmInterval OBJECT-TYPE
SYNTAX INTEGER {one-hundred-ms(1), one-sec(2), ten-sec(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LMM transmission interval."
DEFVAL { one-sec }
::= { mplsTpOAMLmmEntry 5 }
oamLmmRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Now only realize CreateAndGo and Destroy and Active."
::= { mplsTpOAMLmmEntry 15 }
mplsTpOAMLmDualTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLmDualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM LmDual table."
::= { mpls 94 }
mplsTpOAMLmDualEntry OBJECT-TYPE
SYNTAX MplsTpOAMLmDualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP LmDual entries."
INDEX { mplsTpOAMLmDualMegId, mplsTpOAMLmDualIndex }
::= { mplsTpOAMLmDualTable 1 }
MplsTpOAMLmDualEntry ::=
SEQUENCE {
mplsTpOAMLmDualMegId OCTET STRING,
mplsTpOAMLmDualIndex Integer32,
mplsTpOAMLmDualService INTEGER,
mplsTpOAMLmDualMepId Integer32,
mplsTpOAMLmDualExp Integer32,
mplsTpOAMLmDualLocalLoss Integer32,
mplsTpOAMLmDualLocalLossRatio Integer32,
mplsTpOAMLmDualRemoteLoss Integer32,
mplsTpOAMLmDualRemoteLossRatio Integer32
}
mplsTpOAMLmDualMegId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMLmDualEntry 1 }
mplsTpOAMLmDualIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the entry."
::= { mplsTpOAMLmDualEntry 2 }
mplsTpOAMLmDualService OBJECT-TYPE
SYNTAX INTEGER
{
section(1),
lsp(2),
pw-tpe(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service type of the data."
::= { mplsTpOAMLmDualEntry 3 }
mplsTpOAMLmDualMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MEP ID."
::= { mplsTpOAMLmDualEntry 4 }
mplsTpOAMLmDualExp OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Exp value, the range is 0 to 7 for cos and 8 for all-cos."
::= { mplsTpOAMLmDualEntry 5 }
mplsTpOAMLmDualLocalLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm near end loss."
::= { mplsTpOAMLmDualEntry 6 }
mplsTpOAMLmDualLocalLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm near end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmDualEntry 7 }
mplsTpOAMLmDualRemoteLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm far end loss."
::= { mplsTpOAMLmDualEntry 8 }
mplsTpOAMLmDualRemoteLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm far end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmDualEntry 9 }
mplsTpOAMLmDualLossTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLmDualLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM LmDualLoss table."
::= { mpls 95 }
mplsTpOAMLmDualLossEntry OBJECT-TYPE
SYNTAX MplsTpOAMLmDualLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP LmDualLoss entries."
INDEX { mplsTpOAMLmDualLossMegId }
::= { mplsTpOAMLmDualLossTable 1 }
MplsTpOAMLmDualLossEntry ::=
SEQUENCE {
mplsTpOAMLmDualLossMegId OCTET STRING,
mplsTpOAMLmDualLossMepId Integer32,
mplsTpOAMLmDualLossStartTime OCTET STRING,
mplsTpOAMLmDualLossEndTime OCTET STRING,
mplsTpOAMLmDualStatusInterval Integer32,
mplsTpOAMLmDualMaxLocalLoss Integer32,
mplsTpOAMLmDualMaxLocalLossRatio Integer32,
mplsTpOAMLmDualMinLocalLoss Integer32,
mplsTpOAMLmDualMinLocalLossRatio Integer32,
mplsTpOAMLmDualMaxRemoteLoss Integer32,
mplsTpOAMLmDualMaxRemoteLossRatio Integer32,
mplsTpOAMLmDualMinRemoteLoss Integer32,
mplsTpOAMLmDualMinRemoteLossRatio Integer32
}
mplsTpOAMLmDualLossMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMLmDualLossEntry 1 }
mplsTpOAMLmDualLossMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mep Id."
::= { mplsTpOAMLmDualLossEntry 2 }
mplsTpOAMLmDualLossStartTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lm dual Start Time."
::= { mplsTpOAMLmDualLossEntry 3 }
mplsTpOAMLmDualLossEndTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lm dual End Time."
::= { mplsTpOAMLmDualLossEntry 4 }
mplsTpOAMLmDualStatusInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm status interval."
::= { mplsTpOAMLmDualLossEntry 5 }
mplsTpOAMLmDualMaxLocalLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm max near end loss."
::= { mplsTpOAMLmDualLossEntry 6 }
mplsTpOAMLmDualMaxLocalLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm max near end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmDualLossEntry 7 }
mplsTpOAMLmDualMinLocalLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm min near end loss."
::= { mplsTpOAMLmDualLossEntry 8}
mplsTpOAMLmDualMinLocalLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm min near end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmDualLossEntry 9 }
mplsTpOAMLmDualMaxRemoteLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm max far end loss."
::= { mplsTpOAMLmDualLossEntry 10 }
mplsTpOAMLmDualMaxRemoteLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm max far end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmDualLossEntry 11 }
mplsTpOAMLmDualMinRemoteLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm min far end loss."
::= { mplsTpOAMLmDualLossEntry 12 }
mplsTpOAMLmDualMinRemoteLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dual-lm min far end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmDualLossEntry 13 }
mplsTpOAMLmSingleTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLmSingleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM LmSingle table."
::= { mpls 96 }
mplsTpOAMLmSingleEntry OBJECT-TYPE
SYNTAX MplsTpOAMLmSingleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP LmSingle entries."
INDEX { mplsTpOAMLmSingleMegId, mplsTpOAMLmSingleIndex }
::= { mplsTpOAMLmSingleTable 1 }
MplsTpOAMLmSingleEntry ::=
SEQUENCE {
mplsTpOAMLmSingleMegId OCTET STRING,
mplsTpOAMLmSingleIndex Integer32,
mplsTpOAMLmSingleService INTEGER,
mplsTpOAMLmSingleMepId Integer32,
mplsTpOAMLmSingleExp Integer32,
mplsTpOAMLmSingleLocalLoss Integer32,
mplsTpOAMLmSingleLocalLossRatio Integer32,
mplsTpOAMLmSingleRemoteLoss Integer32,
mplsTpOAMLmSingleRemoteLossRatio Integer32
}
mplsTpOAMLmSingleMegId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMLmSingleEntry 1 }
mplsTpOAMLmSingleIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the entry."
::= { mplsTpOAMLmSingleEntry 2 }
mplsTpOAMLmSingleService OBJECT-TYPE
SYNTAX INTEGER
{
section(1),
lsp(2),
pw-tpe(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service type of the data."
::= { mplsTpOAMLmSingleEntry 3 }
mplsTpOAMLmSingleMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MEP ID."
::= { mplsTpOAMLmSingleEntry 4 }
mplsTpOAMLmSingleExp OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Exp value, the range is 0 to 7 for cos and 8 for all-cos."
::= { mplsTpOAMLmSingleEntry 5 }
mplsTpOAMLmSingleLocalLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm near end loss."
::= { mplsTpOAMLmSingleEntry 6 }
mplsTpOAMLmSingleLocalLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm near end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmSingleEntry 7 }
mplsTpOAMLmSingleRemoteLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm far end loss."
::= { mplsTpOAMLmSingleEntry 8 }
mplsTpOAMLmSingleRemoteLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm far end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmSingleEntry 9 }
mplsTpOAMLmSingleLossTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMLmSingleLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM LmSingleLoss table."
::= { mpls 97 }
mplsTpOAMLmSingleLossEntry OBJECT-TYPE
SYNTAX MplsTpOAMLmSingleLossEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP LmSingleLoss entries."
INDEX { mplsTpOAMLmSingleLossMegId }
::= { mplsTpOAMLmSingleLossTable 1 }
MplsTpOAMLmSingleLossEntry ::=
SEQUENCE {
mplsTpOAMLmSingleLossMegId OCTET STRING,
mplsTpOAMLmSingleLossMepId Integer32,
mplsTpOAMLmSingleLossStartTime OCTET STRING,
mplsTpOAMLmSingleLossEndTime OCTET STRING,
mplsTpOAMLmSingleMaxLocalLoss Integer32,
mplsTpOAMLmSingleMaxLocalLossRatio Integer32,
mplsTpOAMLmSingleMinLocalLoss Integer32,
mplsTpOAMLmSingleMinLocalLossRatio Integer32,
mplsTpOAMLmSingleMaxRemoteLoss Integer32,
mplsTpOAMLmSingleMaxRemoteLossRatio Integer32,
mplsTpOAMLmSingleMinRemoteLoss Integer32,
mplsTpOAMLmSingleMinRemoteLossRatio Integer32
}
mplsTpOAMLmSingleLossMegId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..12))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMLmSingleLossEntry 1 }
mplsTpOAMLmSingleLossMepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mep Id."
::= { mplsTpOAMLmSingleLossEntry 2 }
mplsTpOAMLmSingleLossStartTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lm Single Start Time."
::= { mplsTpOAMLmSingleLossEntry 3 }
mplsTpOAMLmSingleLossEndTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lm Single End Time."
::= { mplsTpOAMLmSingleLossEntry 4 }
mplsTpOAMLmSingleMaxLocalLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm max near end loss."
::= { mplsTpOAMLmSingleLossEntry 5 }
mplsTpOAMLmSingleMaxLocalLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm max near end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmSingleLossEntry 6 }
mplsTpOAMLmSingleMinLocalLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm min near end loss."
::= { mplsTpOAMLmSingleLossEntry 7}
mplsTpOAMLmSingleMinLocalLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm min near end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmSingleLossEntry 8 }
mplsTpOAMLmSingleMaxRemoteLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm max far end loss."
::= { mplsTpOAMLmSingleLossEntry 9 }
mplsTpOAMLmSingleMaxRemoteLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm max far end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmSingleLossEntry 10 }
mplsTpOAMLmSingleMinRemoteLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm min far end loss."
::= { mplsTpOAMLmSingleLossEntry 11 }
mplsTpOAMLmSingleMinRemoteLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm min far end loss ratio, the range is 0 - 1000000,
unit is one in a million."
::= { mplsTpOAMLmSingleLossEntry 12 }
mplsTpOAMSingleLMCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTpOAMSingleLMCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP OAM single lm cache table."
::= { mpls 100 }
mplsTpOAMSingleLMCacheEntry OBJECT-TYPE
SYNTAX MplsTpOAMSingleLMCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPLS-TP single lm cache entries."
INDEX { mplsTpOAMSingleLMCacheMegId, mplsTpOAMSingleLMCacheIndex }
::= { mplsTpOAMSingleLMCacheTable 1 }
MplsTpOAMSingleLMCacheEntry ::=
SEQUENCE {
mplsTpOAMSingleLMCacheMegId OCTET STRING,
mplsTpOAMSingleLMCacheIndex Integer32,
mplsTpOAMSingleLMCacheExpValue Integer32,
mplsTpOAMSingleLMCacheLocalLoss Integer32,
mplsTpOAMSingleLMCacheLocalLossRatio Integer32,
mplsTpOAMSingleLMCacheRemoteLoss Integer32,
mplsTpOAMSingleLMCacheRemoteLossRatio Integer32,
mplsTpOAMSingleLMCacheTime OCTET STRING
}
mplsTpOAMSingleLMCacheMegId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MEG ID."
::= { mplsTpOAMSingleLMCacheEntry 1 }
mplsTpOAMSingleLMCacheIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the entry."
::= { mplsTpOAMSingleLMCacheEntry 2 }
mplsTpOAMSingleLMCacheExpValue OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Exp value, the range is 0 to 7 for cos and 8 for all-cos."
::= { mplsTpOAMSingleLMCacheEntry 3 }
mplsTpOAMSingleLMCacheLocalLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm near end loss."
::= { mplsTpOAMSingleLMCacheEntry 4 }
mplsTpOAMSingleLMCacheLocalLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm near end loss ratio, the range is 1 - 1000000,
unit is one in a million."
::= { mplsTpOAMSingleLMCacheEntry 5 }
mplsTpOAMSingleLMCacheRemoteLoss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm far end loss."
::= { mplsTpOAMSingleLMCacheEntry 6 }
mplsTpOAMSingleLMCacheRemoteLossRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Single-lm far end loss ratio, the range is 1 - 1000000,
unit is one in a million."
::= { mplsTpOAMSingleLMCacheEntry 7 }
mplsTpOAMSingleLMCacheTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cache time."
::= { mplsTpOAMSingleLMCacheEntry 8 }
mplsTrapGroup OBJECT IDENTIFIER ::= { mpls 1000 }
tpOAMEventTrap NOTIFICATION-TYPE
OBJECTS { mplsTpOAMEventService, mplsTpOAMEventMegId, mplsTpOAMEventMepId, mplsTpOAMEventId, mplsTpOAMEventAction }
STATUS current
DESCRIPTION
"Mpls-tp OAM event."
::= { mplsTrapGroup 1 }
mplsTunnelSwitch NOTIFICATION-TYPE
OBJECTS { mplsTunnelSelectedLspPe, mplsTunnelG8131CurrentState }
STATUS current
DESCRIPTION
"Lsp switchover of mpls tunnel."
::= { mplsTrapGroup 2 }
mplsTPVpwsSwitch NOTIFICATION-TYPE
OBJECTS { mplsTPVpwsSelectedPw, mplsTPVpwsG8131CurrentState }
STATUS current
DESCRIPTION
"PW switchover of mpls-tp vpws."
::= { mplsTrapGroup 3 }
mplsVplsTPPeerSwitch NOTIFICATION-TYPE
OBJECTS { mplsVplsTPPeerSelectedPw, mplsVplsTPPeerG8131CurrentState }
STATUS current
DESCRIPTION
"PW switchover of mpls-tp vpls peer."
::= { mplsTrapGroup 4 }
mplsVpwsStateChange NOTIFICATION-TYPE
OBJECTS { mplsVpwsState }
STATUS current
DESCRIPTION
"Active or inactive of vpws."
::= { mplsTrapGroup 5 }
mplsVplsPeerStateChange NOTIFICATION-TYPE
OBJECTS { mplsVplsPeerState }
STATUS current
DESCRIPTION
"Active or inactive of vpls peer."
::= { mplsTrapGroup 6 }
mplsVpwsOAMCsfStateChange NOTIFICATION-TYPE
OBJECTS { mplsTPVpwsOAMCsfSrvState, mplsTPVpwsOAMCsfClientState, mplsTPVpwsOAMCsfDCReason, mplsTPVpwsOAMCsfClientInterval }
STATUS current
DESCRIPTION
"Vpws OAM csf state change."
::= { mplsTrapGroup 7 }
tpOAMSingleLmLocalLossTrap NOTIFICATION-TYPE
OBJECTS { mplsTpOAMSingleLMCacheLocalLoss, mplsTpOAMSingleLMCacheLocalLossRatio, mplsTpOAMSingleLMCacheTime}
STATUS current
DESCRIPTION
"Single lm local loss reaches threshold."
::= { mplsTrapGroup 8 }
tpOAMSingleLmLocalLossClearTrap NOTIFICATION-TYPE
OBJECTS { mplsTpOAMSingleLMCacheLocalLoss, mplsTpOAMSingleLMCacheLocalLossRatio, mplsTpOAMSingleLMCacheTime}
STATUS current
DESCRIPTION
"Single lm local loss reaches threshold."
::= { mplsTrapGroup 9 }
tpOAMSingleLmRemoteLossTrap NOTIFICATION-TYPE
OBJECTS { mplsTpOAMSingleLMCacheRemoteLoss, mplsTpOAMSingleLMCacheLocalLossRatio, mplsTpOAMSingleLMCacheTime}
STATUS current
DESCRIPTION
"Single lm local loss reaches threshold."
::= { mplsTrapGroup 10 }
tpOAMSingleLmRemoteLossClearTrap NOTIFICATION-TYPE
OBJECTS { mplsTpOAMSingleLMCacheRemoteLoss, mplsTpOAMSingleLMCacheRemoteLossRatio, mplsTpOAMSingleLMCacheTime}
STATUS current
DESCRIPTION
"Single lm local loss reaches threshold."
::= { mplsTrapGroup 11 }
writeSuccessTrap NOTIFICATION-TYPE
OBJECTS { configSave }
STATUS current
DESCRIPTION
"Config write success"
::= { sysTrap 1 }
writeFailureTrap NOTIFICATION-TYPE
OBJECTS { configSave }
STATUS current
DESCRIPTION
"Config write failure"
::= { sysTrap 2 }
rebootSendTrap NOTIFICATION-TYPE
OBJECTS { reload }
STATUS current
DESCRIPTION
"Reload send trap"
::= { sysTrap 3 }
memUsageHigher NOTIFICATION-TYPE
OBJECTS { memTotalFree }
STATUS current
DESCRIPTION
"Memory usage higher"
::= { sysTrap 4 }
memUsageFormHigherToNormal NOTIFICATION-TYPE
OBJECTS { memTotalFree }
STATUS current
DESCRIPTION
"Memory usage from higher to normal"
::= { sysTrap 5 }
vtySessionStartTrap NOTIFICATION-TYPE
OBJECTS { usersLineIndex, usersname, usersLocation }
STATUS current
DESCRIPTION
"Virtual terminal session start"
::= { sysTrap 6 }
vtySessionStopTrap NOTIFICATION-TYPE
OBJECTS { usersLineIndex, usersname, usersLocation }
STATUS current
DESCRIPTION
"Virtual terminal session stop"
::= { sysTrap 7 }
timeChangeTrap NOTIFICATION-TYPE
OBJECTS { timeSetClock, timeSetMonth, timeSetDay, timeSetYear }
STATUS current
DESCRIPTION
"Time Change Trap"
::= { sysTrap 8 }
cpuUsageHigher NOTIFICATION-TYPE
OBJECTS { ssCpuIdle }
STATUS current
DESCRIPTION
"Cpu Usage higher"
::= { sysTrap 9 }
cpuUsageFormHigherToNormal NOTIFICATION-TYPE
OBJECTS { ssCpuIdle }
STATUS current
DESCRIPTION
"Cpu Usage from higher to normal"
::= { sysTrap 10 }
lastCommandTrap NOTIFICATION-TYPE
OBJECTS { lastCommand }
STATUS current
DESCRIPTION
"The trap of the last command line and time. The command must be a legal and configure command."
::= { sysTrap 11 }
cFInserted NOTIFICATION-TYPE
OBJECTS { cfIndex }
STATUS current
DESCRIPTION
"Insert CF card."
::= { sysTrap 12 }
cFRemoved NOTIFICATION-TYPE
OBJECTS { cfIndex }
STATUS current
DESCRIPTION
"Remove CF card."
::= { sysTrap 13 }
loginFailTrap NOTIFICATION-TYPE
OBJECTS { loginFail }
STATUS current
DESCRIPTION
"Login fail for three times."
::= { sysTrap 14 }
processDumpTrap NOTIFICATION-TYPE
OBJECTS { lastDumpedProcess }
STATUS current
DESCRIPTION
"The trap of the last dumped process id."
::= { sysTrap 15 }
-- Sub Module: SMART-LINK
--
-- Node definitions
--
smartlinkRelayEnable OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Relay flush packet is enabled on the device or not.
The meanings of the values are:
enabled(1) - Enable smart-link relay;
disabled(2) - Disable smart-link relay;"
::= { smartlink 1 }
smartlinkClearStatistic OBJECT-TYPE
SYNTAX INTEGER { yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Clear the statistic infomation smart link module.
The meanings of the values are:
YES(1) - Clear it;"
::= { smartlink 2 }
-- smartlinkGroupTable
smartlinkGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmartlinkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains smart-link group information."
::= { smartlink 3 }
smartlinkGroupEntry OBJECT-TYPE
SYNTAX SmartlinkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of smart-link group information "
INDEX { smartlinkGroupindex }
::= { smartlinkGroupTable 1 }
SmartlinkGroupEntry ::=
SEQUENCE
{
smartlinkGroupindex
INTEGER,
smartlinkGroupRowStatus
RowStatus,
smartlinkGroupMasterIntf
InterfaceIndex,
smartlinkGroupMasterDnCnt
INTEGER,
smartlinkGroupMasterlstDnTime
OCTET STRING,
smartlinkGroupMasterflhCnt
INTEGER,
smartlinkGroupMasterlstflhTime
OCTET STRING,
smartlinkGroupSlaveIntf
InterfaceIndex,
smartlinkGroupSlaveDnCnt
INTEGER,
smartlinkGroupSlavelstDnTime
OCTET STRING,
smartlinkGroupSlaveflhCnt
INTEGER,
smartlinkGroupSlavelstflhTime
OCTET STRING,
smartlinkGroupMstpInstance
OCTET STRING,
smartlinkGroupLoadBalanceInstance
OCTET STRING,
smartlinkGroupRestoreEnable
INTEGER,
smartlinkGroupRestoreTime
INTEGER,
smartlinkGroupControlVlan
INTEGER,
smartlinkGroupControlVlanPassword
OCTET STRING,
smartlinkGroupEnable
INTEGER
}
smartlinkGroupindex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an group in the smart link table."
::= { smartlinkGroupEntry 1 }
smartlinkGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { smartlinkGroupEntry 2 }
smartlinkGroupMasterIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of the port for which this smart-link contains master interface.
0 means delete"
::= { smartlinkGroupEntry 3 }
smartlinkGroupMasterDnCnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master down count."
::= { smartlinkGroupEntry 4 }
smartlinkGroupMasterlstDnTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master last down time."
::= { smartlinkGroupEntry 5 }
smartlinkGroupMasterflhCnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master flush count."
::= { smartlinkGroupEntry 6 }
smartlinkGroupMasterlstflhTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master last flush time."
::= { smartlinkGroupEntry 7 }
smartlinkGroupSlaveIntf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of the port for which this smart-link contains slave interface.
0 means delete"
::= { smartlinkGroupEntry 8 }
smartlinkGroupSlaveDnCnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master down count."
::= { smartlinkGroupEntry 9 }
smartlinkGroupSlavelstDnTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master last down time."
::= { smartlinkGroupEntry 10 }
smartlinkGroupSlaveflhCnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master flush count."
::= { smartlinkGroupEntry 11 }
smartlinkGroupSlavelstflhTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link master last flush time."
::= { smartlinkGroupEntry 12 }
smartlinkGroupMstpInstance OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4094))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protected mstp instance ID.
-1 means delete"
::= { smartlinkGroupEntry 13 }
smartlinkGroupLoadBalanceInstance OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4094))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Load-balance instance ID.
-1 means delete"
::= { smartlinkGroupEntry 14 }
smartlinkGroupRestoreEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto-restore of the smart link group is enabled on the device or not.
The meanings of the values are:
enabled(1) - Enable auto-restore of the smart link group;
disabled(2) - Disable auto-restore of the smart link group;"
::= { smartlinkGroupEntry 15 }
smartlinkGroupRestoreTime OBJECT-TYPE
SYNTAX INTEGER(30..1200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time range(Second) of Restore time. Range <30-1200>"
::= { smartlinkGroupEntry 16 }
smartlinkGroupControlVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan id of the smart-link control vlan.
Set 0 to delete the control vlan."
::= { smartlinkGroupEntry 17 }
smartlinkGroupControlVlanPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password of the smart-link control vlan.
By default the password is 'default'"
DEFVAL {"default"}
::= { smartlinkGroupEntry 18 }
smartlinkGroupEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of smart-link group .
The meanings of the values are:
enabled(1) - Enable smart-link group;
disabled(2) - Disable smart-link group;"
::= { smartlinkGroupEntry 19 }
-- smartlinkRcvFlushintfTable
smartlinkRcvFlushintfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmartlinkRcvFlushintfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains smart-link group information."
::= { smartlink 4 }
smartlinkRcvFlushintfEntry OBJECT-TYPE
SYNTAX SmartlinkRcvFlushintfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of smart-link group information. "
INDEX { smartlinkGroupindex }
::= { smartlinkRcvFlushintfTable 1 }
SmartlinkRcvFlushintfEntry ::=
SEQUENCE
{
smartlinkRcvFlushintfindex
InterfaceIndex,
smartlinkRcvFlushintfVlan
INTEGER,
smartlinkRcvFlushintfVlanPassword
OCTET STRING,
martlinkRcvFlushintfSetState
RowStatus
}
smartlinkRcvFlushintfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the interface which smart-link receive flush from."
::= { smartlinkRcvFlushintfEntry 1 }
smartlinkRcvFlushintfVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan id of the interface which smart-link receive flush from."
::= { smartlinkRcvFlushintfEntry 2 }
smartlinkRcvFlushintfVlanPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password of the interface which smart-link receive flush from."
::= { smartlinkRcvFlushintfEntry 3 }
martlinkRcvFlushintfSetState OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { smartlinkRcvFlushintfEntry 4 }
--
smartlinkRcvFlushPktNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link received flush packet number."
::= { smartlink 5 }
smartlinkProcFlushPktNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Smart-link processed flush packet number."
::= { smartlink 6 }
--flowctrl OBJECT IDENTIFIER ::= { OID 71 }
-- Sub Module: FLOW-CONTROL
--
-- Node definitions
--
-- flowctrlSendEnableTable
flowctrlSendEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF FlowctrlSendEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Enable or disable flow control send function.
The meanings of the values are:
on(1) - Set send flowcontrol enable;
off(2) - Set send flowcontrol disable;
Default setting is off(2)."
::= { flowctrl 1 }
flowctrlSendEnableEntry OBJECT-TYPE
SYNTAX FlowctrlSendEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of flowctrl Send Enable group information. "
INDEX { interfaceIndex }
::= { flowctrlSendEnableTable 1 }
FlowctrlSendEnableEntry ::=
SEQUENCE
{
flowctrlSendEnable
INTEGER
}
flowctrlSendEnable OBJECT-TYPE
SYNTAX INTEGER {on(1),off(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable flow control send function.
The meanings of the values are:
on(1) - Set send flowcontrol enable;
off(2) - Set send flowcontrol disable;
Default setting is off(2."
DEFVAL { 2 }
::= { flowctrlSendEnableEntry 1 }
-- flowctrlReceiveEnableTable
flowctrlReceiveEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF FlowctrlReceiveEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Enable or disable flow control Receive function.
The meanings of the values are:
on(1) - Set Receive flowcontrol enable;
off(2) - Set Receive flowcontrol disable;
Default setting is off(2)."
::= { flowctrl 2 }
flowctrlReceiveEnableEntry OBJECT-TYPE
SYNTAX FlowctrlReceiveEnableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of smart-link group information "
INDEX { interfaceIndex }
::= { flowctrlReceiveEnableTable 1 }
FlowctrlReceiveEnableEntry ::=
SEQUENCE
{
flowctrlReceiveEnable
INTEGER
}
flowctrlReceiveEnable OBJECT-TYPE
SYNTAX INTEGER {on(1),off(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable flow control Receive function.
The meanings of the values are:
on(1) - Set Receive flowcontrol enable;
off(2) - Set Receive flowcontrol disable;
Default setting is off(2)."
DEFVAL { 2 }
::= { flowctrlReceiveEnableEntry 1 }
--cputraffic OBJECT IDENTIFIER ::= { OID 72 }
-- Sub Module: CPU-TRAFFIC
--
-- Node definitions
--
cputrafficLimitTotalRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the total rate of all streams destined to CPU. Value range 0~1000000 pps. Default 2048 pps"
DEFVAL { 2048 }
::= { cputraffic 1 }
cputrafficLimitReasonRate OBJECT IDENTIFIER ::= { cputraffic 2 }
arpReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Address Resolution Protocol.
Rate range 0~1000000.
Default value 256 pps."
DEFVAL { 256 }
::= { cputrafficLimitReasonRate 1 }
bpduReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Bridge Protocol Data Unit.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 2 }
cfmReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Connectivity Fault Management.
Rate range 0~1000000.
Default value 512 pps."
DEFVAL { 512 }
::= { cputrafficLimitReasonRate 3 }
dhcpReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dynamic Host Configuration Protocol.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 4 }
eapolReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Extensible Authentication Protocol Over Lan.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 5 }
erpsReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ethernet Ring Protection Switching.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 6 }
sflowIngressReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sampled flow at ingress direction.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 7 }
icmpRedirectReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ICMP Redirect.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 8 }
--icmpV6ReasonRate OBJECT-TYPE
-- SYNTAX INTEGER (1..1000000)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Internet Control Message Protocol Version 6.
-- Rate range 0~1000000.
-- Default value 500 kbps."
-- DEFVAL { 500 }
-- ::= { cputrafficLimitReasonRate 9 }
igmpReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IGMP/IGMP Snooping Protocol.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 9 }
ipOptionReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Packets with IP Option.
Rate range 0~1000000.
Default value 512 pps."
DEFVAL { 512 }
::= { cputrafficLimitReasonRate 10 }
ipDaReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP Destination to Router-self.
Rate range 0~1000000.
Default value 1024 pps."
DEFVAL { 1024 }
::= { cputrafficLimitReasonRate 11 }
ldpReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Label Distribution Protocol.
Rate range 0~1000000.
Default value 512 pps."
DEFVAL { 512 }
::= { cputrafficLimitReasonRate 12 }
macSaMismatchReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port Security for source mac learned.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 13 }
mcastRpfFailReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Multicast with rpf fail or first multicast packet.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 14 }
mplsTtlFailReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Mpls Packets with ttl fail.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 15 }
mtuDontFragReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Fragment with Flag dont-frag Set.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 16 }
mtuFragReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Need Fragment.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 17 }
ospfReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Open Shortest Path First.
Rate range 0~1000000.
Default value 256 pps."
DEFVAL { 256 }
::= { cputrafficLimitReasonRate 18 }
pimReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Protocol Independent Multicast.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 19 }
portSecurityDiscardReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port Security for exceeding fdb maxnum.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 20 }
ptpReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Precision Time Synchronization Protocol.
Rate range 0~1000000.
Default value 512 pps."
DEFVAL { 512 }
::= { cputrafficLimitReasonRate 21 }
ripReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Routing Information Protocol.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 22 }
rsvpReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Resource Reservation Protocol.
Rate range 0~1000000.
Default value 512 pps."
DEFVAL { 512 }
::= { cputrafficLimitReasonRate 23 }
slowProtoReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Slow Protocol.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 24 }
smartLinkReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Smart Link Protocol.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 25 }
ucastIpTtlFailReasonRate OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Unicast Packets with ttl fail.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 26 }
vlanSecurityDiscardReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Vlan Security for exceeding fdb maxnum.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 27 }
vrrpReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Virtual Router Redundancy Protocol.
Rate range 0~1000000.
Default value 512 pps."
DEFVAL { 512 }
::= { cputrafficLimitReasonRate 28 }
mldReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" MLD/MLD Snooping Protocol.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 29 }
sflowEgressReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sampled flow at egress direction.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 30 }
udldReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Unidirectional Link Detection Protocol.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 31 }
fwdToCpuReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Packets forwarding to cpu.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 32 }
mplsTpPwOamReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" MPLS-TP-OAM for PW.
Rate range 0~1000000.
Default value 128 pps."
DEFVAL { 128 }
::= { cputrafficLimitReasonRate 33 }
dot1xMacBypassReasonRate OBJECT-TYPE
SYNTAX INTEGER (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dot1x Mac Auth Bypass.
Rate range 0~1000000.
Default value 64 pps."
DEFVAL { 64 }
::= { cputrafficLimitReasonRate 34 }
cputrafficLimitReasonClass OBJECT IDENTIFIER ::= { cputraffic 3 }
arpReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Address Resolution Protocol.
Class range 0~3.
Default Class is 1 ."
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 1 }
bpduReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Bridge Protocol Data Unit.
Class range 0~3.
Default Class is 3 "
DEFVAL { 3 }
::= { cputrafficLimitReasonClass 2 }
cfmReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Connectivity Fault Management.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 3 }
dhcpReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dynamic Host Configuration Protocol.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 4 }
eapolReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Extensible Authentication Protocol Over Lan.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 5 }
erpsReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ethernet Ring Protection Switching.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 6 }
sflowIngressReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sampled flow at ingress direction.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 7 }
icmpRedirectReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ICMP Redirect.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 8 }
--icmpV6ReasonClass OBJECT-TYPE
-- SYNTAX INTEGER (0..3)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Internet Control Message Protocol Version 6.
-- Class range 0~3.
-- Default Class is 1. "
-- DEFVAL { 1 }
-- ::= { cputrafficLimitReasonClass 9 }
igmpReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IGMP/IGMP Snooping Protocol.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 9 }
ipOptionReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Packets with IP Option.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 10 }
ipDaReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IP Destination to Router-self.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 11 }
ldpReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Label Distribution Protocol.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 12 }
macSaMismatchReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port Security for source mac learned.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 13 }
mcastRpfFailReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Multicast with rpf fail or first multicast packet.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 14 }
--mcastTtlReasonClass OBJECT-TYPE
-- SYNTAX INTEGER (0..3)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- " Multicast Packets with ttl fail.
-- Class range 0~3.
-- Default Class is 0. "
-- DEFVAL { 0 }
-- ::= { cputrafficLimitReasonClass 15 }
mplsTtlFailReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Mpls Packets with ttl fail.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 15 }
mtuDontFragReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Fragment with Flag dont-frag Set.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 16 }
mtuFragReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Need Fragment.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 17 }
ospfReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Open Shortest Path First.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 18 }
pimReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Protocol Independent Multicast.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 19 }
portSecurityDiscardReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Port Security for exceeding fdb maxnum.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 20 }
ptpReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Precision Time Synchronization Protocol.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 21 }
ripReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Routing Information Protocol.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 22 }
rsvpReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Resource Reservation Protocol.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 23 }
slowProtoReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Slow Protocol.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 24 }
smartLinkReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Smart Link Protocol.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 25 }
ucastIpTtlFailReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Unicast Packets with ttl fail.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 26 }
vlanSecurityDiscardReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Vlan Security for exceeding fdb maxnum.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 27 }
vrrpReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Virtual Router Redundancy Protocol.
Class range 0~3.
Default Class is 1. "
DEFVAL { 1 }
::= { cputrafficLimitReasonClass 28 }
mldReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" MLD/MLD Snooping Protocol.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 29 }
sflowEgressReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sampled flow at egress direction.
Class range 0~3.
Default Class is 0. "
DEFVAL { 0 }
::= { cputrafficLimitReasonClass 30 }
udldReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Sampled flow at egress direction.
Class range 0~3.
Default Class is 3. "
DEFVAL { 3 }
::= { cputrafficLimitReasonClass 31 }
mplsTpPwOamReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" MPLS-TP-OAM for PW.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 33 }
dot1xMacBypassReasonClass OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dot1x Mac Auth Bypass.
Class range 0~3.
Default Class is 2. "
DEFVAL { 2 }
::= { cputrafficLimitReasonClass 34 }
-- Sub Module: PORT-ISOLATE
-- portisolate OBJECT IDENTIFIER ::= { OID 73 }
--
-- Node definitions
--
portIsolateMode OBJECT-TYPE
SYNTAX INTEGER {l2(1),all(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set isolate mode on the switch The default setting is l2.
The meanings of the values are:
l2(1) - Isolate bridged packets;
all(2) - Isolate bridged packtes and routed packets;"
DEFVAL { all }
::= { portisolate 1 }
-- Sub Module: PHY-LOOKBACK
-- phyloopback OBJECT IDENTIFIER ::= { OID 74 }
--
-- Node definitions
--
-- phyloopbackTable
phyloopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhyloopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains phy-loopback internal group information."
::= { phyloopback 1 }
phyloopbackEntry OBJECT-TYPE
SYNTAX PhyloopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of phy-loopback internal group information "
INDEX { phyloopbackIfindex }
::= { phyloopbackTable 1 }
PhyloopbackEntry ::=
SEQUENCE
{
phyloopbackIfindex
INTEGER,
phyloopbackType
INTEGER,
phyloopbackDstIfindex
INTEGER,
phyloopbackMacAddrSwap
INTEGER,
phyloopbackRowStatus
RowStatus
}
phyloopbackIfindex OBJECT-TYPE
SYNTAX INTEGER (1..52)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of interface that uniquely identifies an phyloopback entry in the phyloopback table."
::= { phyloopbackEntry 1 }
phyloopbackType OBJECT-TYPE
SYNTAX INTEGER {internal(0), external(1), port(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Phy loopback commands type. internal(0), external(1), port(2). "
::= { phyloopbackEntry 2 }
phyloopbackDstIfindex OBJECT-TYPE
SYNTAX INTEGER (1..52)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An index that uniquely identifies phyloopback destination physical interface."
::= { phyloopbackEntry 3 }
phyloopbackMacAddrSwap OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet's SMAC incoming from port level loopback interface will be swaped with it's DMAC,
and the FCS will be updated. enable(1), disable(2). Default setting is disable(2).
For other types, should always be disable(2)."
::= { phyloopbackEntry 4 }
phyloopbackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo(4) and Destroy(6) and Active(1)."
::= { phyloopbackEntry 5 }
-- Sub Module: Monitor link
monitorLinkRecoverTime OBJECT-TYPE
SYNTAX Integer32 (3..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the recover time for down_link port, when the up_link up."
DEFVAL { 3 }
::= { monitorlink 1 }
monitorLinkGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorLinkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Monitor link group."
::= { monitorlink 2 }
monitorLinkGroupEntry OBJECT-TYPE
SYNTAX MonitorLinkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of Monitor link group."
INDEX { groupIndex}
::= { monitorLinkGroupTable 1 }
MonitorLinkGroupEntry ::=
SEQUENCE
{
groupIndex
Integer32,
groupStatus
INTEGER,
groupRowStatus
RowStatus
}
groupIndex OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Monitor link group. The index value is group id minus 1."
::= { monitorLinkGroupEntry 1 }
groupStatus OBJECT-TYPE
SYNTAX INTEGER {up(1), down(2), idle(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of group."
::= { monitorLinkGroupEntry 2 }
groupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize Destroy and Active."
::= { monitorLinkGroupEntry 3 }
monitorLinkMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorLinkMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Monitor link member."
::= { monitorlink 3 }
monitorLinkMemberEntry OBJECT-TYPE
SYNTAX MonitorLinkMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of Monitor link member."
INDEX { groupIndex, memberLinkType, memberIndex}
::= { monitorLinkMemberTable 1 }
MonitorLinkMemberEntry ::=
SEQUENCE
{
memberLinkType
INTEGER,
memberIndex
Integer32,
memberType
INTEGER,
memberIdentify
Integer32,
memberUptime
TimeTicks,
memberDowntime
TimeTicks,
memberUpCounter
Counter32,
memberDownCounter
Counter32,
memberRowStatus
RowStatus
}
memberLinkType OBJECT-TYPE
SYNTAX INTEGER {up-link(0), down-link(1)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of Monitor link member."
::= { monitorLinkMemberEntry 1 }
memberIndex OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Monitor link member."
::= { monitorLinkMemberEntry 2 }
memberType OBJECT-TYPE
SYNTAX INTEGER {smart-link(0), interface(1)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of Monitor link member. Type of smart-link can only used as up-link."
::= { monitorLinkMemberEntry 3 }
memberIdentify OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the memberType type is interface, this value should be ifindex.
if the memberType type is smart-link, this value should be smartlinkGroupindex."
::= { monitorLinkMemberEntry 4 }
memberUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last-up-time of member."
::= { monitorLinkMemberEntry 5 }
memberDowntime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last-down-time of member."
::= { monitorLinkMemberEntry 6 }
memberUpCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of up time of the member."
::= { monitorLinkMemberEntry 7 }
memberDownCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TThe counter of down time of the member."
::= { monitorLinkMemberEntry 8 }
memberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize Destroy and Active."
::= { monitorLinkMemberEntry 9 }
-- Sub Module: UDLD
-- udld OBJECT IDENTIFIER ::= { OID 76 }
--
-- Node definitions
--
udldGlobalState OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set UDLD global state.The meanings of the values are:
enable(1) - Globally enable UDLD;
disable(2) - Globally disable UDLD;"
DEFVAL { disable }
::= { udld 1 }
udldMsgInterval OBJECT-TYPE
SYNTAX INTEGER (1..90)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set UDLD message interval.The default value is 15 seconds."
DEFVAL { 15 }
::= { udld 2 }
udldOperate OBJECT-TYPE
SYNTAX INTEGER {reset(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UDLD global operations.The meanings of the values are:
reset(1) - Reset the interfaces disabled by UDLD;"
::= { udld 3 }
udldIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF UDLDIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains UDLD interface information."
::= { udld 4 }
udldIfEntry OBJECT-TYPE
SYNTAX UDLDIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of UDLD interface information "
INDEX { udldIfIndex }
::= { udldIfTable 1 }
UDLDIfEntry ::=
SEQUENCE
{
udldIfIndex
Integer32,
udldIfName
OCTET STRING,
udldState
INTEGER,
udldLinkState
INTEGER
}
udldIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface index."
::= { udldIfEntry 1 }
udldIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Interface name."
::= { udldIfEntry 2 }
udldState OBJECT-TYPE
SYNTAX INTEGER {disable(1),normal(2),aggressive(3)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "UDLD state of an interface.The meanings of the values are:
disable(0) - Disable UDLD;
normal(1) - Enable UDLD normal mode;
aggressive(2) - Enable UDLD aggressive mode;"
DEFVAL { disable }
::= { udldIfEntry 3 }
udldLinkState OBJECT-TYPE
SYNTAX INTEGER {linkUp(0),unknown(1),detection(2),exDetection(3),bidirectional(4),unidirectional(5),selfLoop(7),linkdown(8),inActive(9)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "UDLD operation state of an interface."
::= { udldIfEntry 4 }
-- Sub Module: POLICYBASEDROUTING
--
-- Nodes of policyBaseRoutingIpPolicyRouteMap entry table
--
pbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF PBREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of Policy based routing entry."
::= { policyBasedRouting 1 }
pbrEntry OBJECT-TYPE
SYNTAX PBREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Policy based routing entry"
INDEX { pbrIfIndex}
::= { pbrTable 1 }
PBREntry ::=
SEQUENCE
{
pbrIfIndex
Integer32,
pbrPolicyRmapName
OCTET STRING,
pbrRowStatus
RowStatus
}
pbrIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"interface index which is applying the policy route-map."
::= { pbrEntry 1 }
pbrPolicyRmapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "pbr policy route-map name."
::= { pbrEntry 2 }
pbrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { pbrEntry 9}
-- Sub Module: DDOS prevent
-- ddos OBJECT IDENTIFIER ::= { OID 78 }
--
-- Node definitions
--
ddosICMPIntercept OBJECT-TYPE
SYNTAX Integer32 (-1|0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip ICMP intercept maxcount.The meanings of the values are:
-1 - no Ip ICMP intercept;
0-1000 - Ip ICMP intercept maxcount."
DEFVAL { -1 }
::= { ddos 1 }
ddosUDPIntercept OBJECT-TYPE
SYNTAX Integer32 (-1|0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip UDP intercept maxcount.The meanings of the values are:
-1 - no Ip UDP intercept;
0-1000 - Ip UDP intercept maxcount."
DEFVAL { -1 }
::= { ddos 2 }
ddosTCPIntercept OBJECT-TYPE
SYNTAX Integer32 (-1|0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip TCP intercept maxcount.The meanings of the values are:
-1 - no Ip TCP intercept;
0-1000 - Ip TCP intercept maxcount."
DEFVAL { -1 }
::= { ddos 3 }
ddosSmurfIntercept OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip Smurf intercept maxcount.The meanings of the values are:
enable(1) - Ip Fraggle intercept;
disable(2) - no Ip Fraggle intercept."
DEFVAL { disable }
::= { ddos 4 }
ddosSmalpktIntercept OBJECT-TYPE
SYNTAX Integer32 (-1|28..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip Small-packet intercept maxcount.The meanings of the values are:
-1 - no Ip Small-packet intercept;
28-65535 - Ip Small-packet intercept maxlength."
DEFVAL { -1 }
::= { ddos 5 }
ddosFraggleIntercept OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip Fraggle intercept.The meanings of the values are:
enable(1) - Ip Fraggle intercept;
disable(2) - no Ip Fraggle intercept."
DEFVAL { disable }
::= { ddos 6 }
ddosIpeqIntercept OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip Ipeq intercept.The meanings of the values are:
enable(1) - Ip Ipeq intercept;
disable(2) - no Ip Ipeq intercept."
DEFVAL { disable }
::= { ddos 7 }
ddosMaceqIntercept OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Ip Maceq intercept.The meanings of the values are:
enable(1) - Ip Maceq intercept;
disable(2) - no Ip Maceq intercept."
DEFVAL { disable }
::= { ddos 8 }
ddosSmalPktStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist Small-packet Attack packets number."
DEFVAL { 0 }
::= { ddos 9 }
ddosICMPStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist ICMP Flood packets number."
DEFVAL { 0 }
::= { ddos 10 }
ddosSmurfStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist Smurf Attack packets number."
DEFVAL { 0 }
::= { ddos 11 }
ddosTCPStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist SYN Flood packets number."
DEFVAL { 0 }
::= { ddos 12 }
ddosFraggleStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist Fraggle Attack packets number."
DEFVAL { 0 }
::= { ddos 13 }
ddosUDPStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist UDP Flood packets number."
DEFVAL { 0 }
::= { ddos 14 }
ddosClearStatistic OBJECT-TYPE
SYNTAX INTEGER {clearStatistic(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear IP intercept Statistic.1:clear statistic. "
::= { ddos 15 }
ddosmgifSmalPktStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist mgmt-if Small-packet Attack packets number."
DEFVAL { 0 }
::= { ddos 16 }
ddosmgifICMPStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist mgmt-if ICMP Flood packets number."
DEFVAL { 0 }
::= { ddos 17 }
ddosmgifSmurfStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist mgmt-if Smurf Attack packets number."
DEFVAL { 0 }
::= { ddos 18 }
ddosmgifTCPStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist mgmt-if SYN Flood packets number."
DEFVAL { 0 }
::= { ddos 19 }
ddosmgifFraggleStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist mgmt-if Fraggle Attack packets number."
DEFVAL { 0 }
::= { ddos 20 }
ddosmgifUDPStatistic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show Resist mgmt-if UDP Flood packets number."
DEFVAL { 0 }
::= { ddos 21 }
-- l2ping OBJECT IDENTIFIER ::= { OID 79 }
l2PingResponseTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2PingResponseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains l2 ping response information."
::= { l2ping 1 }
l2PingResponseEntry OBJECT-TYPE
SYNTAX L2PingResponseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface l2ping response information"
INDEX { l2pingResponseIfindex }
::= { l2PingResponseTable 1 }
L2PingResponseEntry ::=
SEQUENCE
{
l2pingResponseIfindex
INTEGER,
l2pingResponseEnable
INTEGER
}
l2pingResponseIfindex OBJECT-TYPE
SYNTAX INTEGER (1..1023)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of interface that uniquely identifies an l2ping entry in the l2PingResponseTable table.
interface should be physical l2 interface"
::= { l2PingResponseEntry 1 }
l2pingResponseEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 ping response enable(1), or disable(2).
Default : disable(2)."
DEFVAL {disable}
::= { l2PingResponseEntry 2 }
--syncE OBJECT IDENTIFIER ::= { OID 81 }
syncEDeviceClockID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A exclusive flag to distinguish every device"
::= { syncE 1 }
syncEGlbEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set whether the device is a synchronous equipment.
The meanings of the values are:
enable(1) - A synchronous equipment;
disable(2) - Not a synchronous equipment"
DEFVAL { disable }
::= { syncE 2 }
syncESsmGlbEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set whether the device work under synchronous
operation mode. The meanings of the values are:
enable(1) - Under synchronous operation mode;
disable(2) - Under non-sync operation mode"
DEFVAL { disable }
::= { syncE 3 }
syncEDeviceType OBJECT-TYPE
SYNTAX INTEGER {master-only(1), slave-only(2), none(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the device type. The meanings of the values are:
master-olny(1) - master-only type;
slave-only(2) - slave-only type;
none(3) - default type"
DEFVAL { none }
::= { syncE 4 }
syncELocalQuality OBJECT-TYPE
SYNTAX INTEGER {op2-prs(1), op1-prc(2), op2-eec2(3), op1-eec1(4),op1-dnu(5), op2-dus(6)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the device quality globally under option1.
The meanings of the values are:
op2-prs(1) - Primary reference source;
op1-prc(2) - Primary reference clock;
op2-eec2(3) - EEC2 clock(ITU-T G.8264);
op1-eec1(4) - EEC1 clock(ITU-T G.8264);
op1-dnu(5) - Do not use this quality;
op2-dus(6) - Do not use for synchronization"
DEFVAL { op1-dnu }
::= { syncE 5 }
syncELockedQuality OBJECT-TYPE
SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the locked quality.The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ Traceability unknown;
ssua(4) - Type I or V slave clock
defined in ITU-T G.812;
tnc(5) - Traceable to transit node clock
(ITU-T G.812, type V);
st2(6) - Traceable to stratum 2
(ITU-T G.812, type II);
ssub(7) - Type VI slave clock defined in ITU-T G.812;
eec2(8) - EEC2 clock or st3 clock;
eec1(9) - EEC1 clock or SEC clock;
smc(10) - Traceable to SONET clock self timed;
st3e(11) - Traceable to stratum 3E
(ITU-T G.812, type III);
prov(12) - Provisionable by the network operator;
dnu(13) - Do not use this quality;
dus(14) - Do not use for synchronization"
::= { syncE 6 }
syncELocalPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the device priority globally.
The range is 1 ~ 255"
DEFVAL { 255 }
::= { syncE 7 }
syncESelectedInterface OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get ifindex of the current selected port.
0 means no interface is selected."
::= { syncE 8 }
syncEExtensionEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set whether the device start extend ssm.
The meanings of the values are:
enable(1) - Start extend ssm;
disable(2) - Not start extend ssm"
DEFVAL { disable }
::= { syncE 9 }
syncEClockState OBJECT-TYPE
SYNTAX INTEGER {master-clock(1), freerun(2), holdover(3), lock(4), unlock(5)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the device clock status.
The meanings of the values are:
master-clock(1) - Master-only device
affords time signal;
freerun(2) - Device has not been synchronized;
holdover(3) - Device going to holdover;
lock(4) - Device select and lock a time signal
unlock(5) - Device select and unlock a time signal"
::= { syncE 10 }
syncEOptionMode OBJECT-TYPE
SYNTAX INTEGER {op1(1), op2(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the device clock ssm option mode.
op1(1) - Option mode 1;
op2(2) - Option mode 2"
::= { syncE 11 }
syncESwitchForceIF OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch time resource to one interface forcibaly.
The value is the ifindex.
Value 0 cancles configuration"
DEFVAL { 0 }
::= { syncE 12 }
syncEIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SYNCEIFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ssm interface entry."
::= { syncE 13 }
syncEIfEntry OBJECT-TYPE
SYNTAX SYNCEIFEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ssm interface entry"
INDEX { syncEIfIndex }
::= { syncEIfTable 1 }
SYNCEIFEntry ::=
SEQUENCE
{
syncEIfIndex Integer32,
syncEIfSyncEEnable INTEGER,
syncEIfSyncEPduMode INTEGER,
syncEIfPortPriority Integer32,
syncEIfPortUp INTEGER,
syncEIfPortQuality INTEGER,
syncEIfSendTimerState INTEGER,
syncEIfTimeoutTimerState INTEGER,
syncEIfSendQuality INTEGER,
syncEIFDNUgroup Integer32,
syncEIfReplaceClockId INTEGER,
syncEIfForcibleRxQL INTEGER,
syncEIfForcibleTxQL INTEGER
}
syncEIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index which is able to apply ssm."
::= { syncEIfEntry 1 }
syncEIfSyncEEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set whether the port is a synchronous port.
The meanings of the values are:
enable(1) - a synchronous port;
disable(2) - not a synchronous port"
DEFVAL { disable }
::= { syncEIfEntry 2 }
syncEIfSyncEPduMode OBJECT-TYPE
SYNTAX INTEGER {rx(1), tx(2), all(3), none-all(4), none-rx(5), none-tx(6)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set whether the interface can receive or send PDU.
The meanings of the values are:
rx(1) - receive PDU only;
tx(2) - send PDU only;
all(3) - receive and send PDU;
none-all(4) - disable receive and send PDU;
none-rx(5) - receive PDU only;
none-tx(6) - send PDU only"
DEFVAL { all }
::= { syncEIfEntry 3 }
syncEIfPortPriority OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the port priority. The range is 1 ~ 255."
DEFVAL { 255 }
::= { syncEIfEntry 4 }
syncEIfPortUp OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the status of whether the port is up.
The meanings of the values are:
enable(1) - Port is up;
disable(2) - Port is down"
::= { syncEIfEntry 5 }
syncEIfPortQuality OBJECT-TYPE
SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the current received quality of port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ Traceability unknown;
ssua(4) - Type I or V slave clock
defined in ITU-T G.812;
tnc(5) - Traceable to transit node clock
(ITU-T G.812, type V);
st2(6) - Traceable to stratum 2
(ITU-T G.812, type II);
ssub(7) - Type VI slave clock defined in ITU-T G.812;
eec2(8) - EEC2 clock or st3 clock;
eec1(9) - EEC1 clock or SEC clock;
smc(10) - Traceable to SONET clock self timed;
st3e(11) - Traceable to stratum 3E
(ITU-T G.812, type III);
prov(12) - Provisionable by the network operator;
dnu(13) - Do not use this quality;
dus(14) - Do not use for synchronization;
na(15) - N/A(not receive)"
::= { syncEIfEntry 6 }
syncEIfSendTimerState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the status of Send timer.
The meanings of the values are:
enable(1) - Enable;
disable(2) - Disable"
::= { syncEIfEntry 7 }
syncEIfTimeoutTimerState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the status of Timeout timer.
The meanings of the values are:
enable(1) - Enable;
disable(2) - Disable"
::= { syncEIfEntry 8 }
syncEIfSendQuality OBJECT-TYPE
SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the current sending quality of port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ Traceability unknown;
ssua(4) - Type I or V slave clock
defined in ITU-T G.812;
tnc(5) - Traceable to transit node clock
(ITU-T G.812, type V);
st2(6) - Traceable to stratum 2
(ITU-T G.812, type II);
ssub(7) - Type VI slave clock defined in ITU-T G.812;
eec2(8) - EEC2 clock or st3 clock;
eec1(9) - EEC1 clock or SEC clock;
smc(10) - Traceable to SONET clock self timed;
st3e(11) - Traceable to stratum 3E
(ITU-T G.812, type III);
prov(12) - Provisionable by the network operator;
dnu(13) - Do not use this quality;
dus(14) - Do not use for synchronization;
na(15) - N/A(not send)"
::= { syncEIfEntry 9 }
syncEIFDNUgroup OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add the port into DNU group. The range is 0 ~ 255.
value 0 is delete port from DNU group."
DEFVAL { 0 }
::= { syncEIfEntry 10 }
syncEIfReplaceClockId OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get or set the status of replace clockid.
The meanings of the values are:
enable(1) - Enable;
disable(2) - Disable"
DEFVAL { disable }
::= { syncEIfEntry 11 }
syncEIfForcibleRxQL OBJECT-TYPE
SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get and set Rx quality of physical port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ Traceability unknown;
ssua(4) - Type I or V slave clock
defined in ITU-T G.812;
tnc(5) - Traceable to transit node clock
(ITU-T G.812, type V);
st2(6) - Traceable to stratum 2
(ITU-T G.812, type II);
ssub(7) - Type VI slave clock defined in ITU-T G.812;
eec2(8) - EEC2 clock or st3 clock;
eec1(9) - EEC1 clock or SEC clock;
smc(10) - Traceable to SONET clock self timed;
st3e(11) - Traceable to stratum 3E
(ITU-T G.812, type III);
prov(12) - Provisionable by the network operator;
dnu(13) - Do not use this quality;
dus(14) - Do not use for synchronization;
na(15) - N/A(not set Rx QL forcibly)"
DEFVAL { 15 }
::= { syncEIfEntry 12 }
syncEIfForcibleTxQL OBJECT-TYPE
SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get and set Tx quality of physical port.
The meanings of the values are:
prs(1) - PRS traceable (ITU-T G.811);
prc(2) - Primary reference clock;
stu(3) - Synchronized Ƀ Traceability unknown;
ssua(4) - Type I or V slave clock
defined in ITU-T G.812;
tnc(5) - Traceable to transit node clock
(ITU-T G.812, type V);
st2(6) - Traceable to stratum 2
(ITU-T G.812, type II);
ssub(7) - Type VI slave clock defined in ITU-T G.812;
eec2(8) - EEC2 clock or st3 clock;
eec1(9) - EEC1 clock or SEC clock;
smc(10) - Traceable to SONET clock self timed;
st3e(11) - Traceable to stratum 3E
(ITU-T G.812, type III);
prov(12) - Provisionable by the network operator;
dnu(13) - Do not use this quality;
dus(14) - Do not use for synchronization;
na(15) - N/A(not set Tx QL forcibly)"
DEFVAL { 15 }
::= { syncEIfEntry 13 }
--ssmForcibleE1RxQL OBJECT-TYPE
-- SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Get and set Rx quality of E1 port.
-- The meanings of the values are:
-- prs(1) - PRS traceable (ITU-T G.811);
-- prc(2) - Primary reference clock;
-- stu(3) - Synchronized Ƀ Traceability unknown;
-- ssua(4) - Type I or V slave clock
-- defined in ITU-T G.812;
-- tnc(5) - Traceable to transit node clock
-- (ITU-T G.812, type V);
-- st2(6) - Traceable to stratum 2
-- (ITU-T G.812, type II);
-- ssub(7) - Type VI slave clock defined in ITU-T G.812;
-- eec2(8) - EEC2 clock or st3 clock;
-- eec1(9) - EEC1 clock or SEC clock;
-- smc(10) - Traceable to SONET clock self timed;
-- st3e(11) - Traceable to stratum 3E
-- (ITU-T G.812, type III);
-- prov(12) - Provisionable by the network operator;
-- dnu(13) - Do not use this quality;
-- dus(14) - Do not use for synchronization;
-- na(15) - N/A(not set Rx QL forcibly)"
-- DEFVAL { 15 }
-- ::= { syncE 14 }
--
--ssmForcibleE1TxQL OBJECT-TYPE
-- SYNTAX INTEGER {prs(1), prc(2), stu(3), ssua(4), tnc(5), st2(6), ssub(7), eec2(8), eec1(9), smc(10), st3e(11), prov(12), dnu(13), dus(14), na(15)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Get and set Tx quality of E1 port.
-- The meanings of the values are:
-- prs(1) - PRS traceable (ITU-T G.811);
-- prc(2) - Primary reference clock;
-- stu(3) - Synchronized Ƀ Traceability unknown;
-- ssua(4) - Type I or V slave clock
-- defined in ITU-T G.812;
-- tnc(5) - Traceable to transit node clock
-- (ITU-T G.812, type V);
-- st2(6) - Traceable to stratum 2
-- (ITU-T G.812, type II);
-- ssub(7) - Type VI slave clock defined in ITU-T G.812;
-- eec2(8) - EEC2 clock or st3 clock;
-- eec1(9) - EEC1 clock or SEC clock;
-- smc(10) - Traceable to SONET clock self timed;
-- st3e(11) - Traceable to stratum 3E
-- (ITU-T G.812, type III);
-- prov(12) - Provisionable by the network operator;
-- dnu(13) - Not to be used for synchronization;
-- dus(14) - Not to be used for synchronization;
-- na(15) - N/A(not set Tx QL forcibly)"
-- DEFVAL { 15 }
-- ::= { syncE 15 }
syncEClockRecoverySelect OBJECT-TYPE
SYNTAX INTEGER {synce(1), bits1(2), bits2(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the way to recovery clock.
The meanings of the values are:
synce(1) - Set syncE to recovery clock;
bits1(2) - Set bits1 to recovery clock;
bits2(3) - Set bits2 to recovery clock"
DEFVAL { 1 }
::= { syncE 15 }
syncENotifications OBJECT IDENTIFIER ::= { syncE 100 }
syncEStateChange NOTIFICATION-TYPE
OBJECTS {syncEClockState, syncESelectedInterface}
STATUS current
DESCRIPTION
"This trap will be generated when state of syncE
changes."
::= {syncENotifications 1}
--arpConfig OBJECT IDENTIFIER ::= { OID 82 }
arpGratuitousRecvEn OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable or disable receiving gratuitous ARP packets."
DEFVAL { disable }
::= { arpConfig 1 }
arpAllEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" All arp entries."
::= { arpConfig 2 }
arpAllIncompleteEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" All arp incomplete entries."
::= { arpConfig 3 }
--cfm OBJECT IDENTIFIER ::= { OID 83 }
cfmEn OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable cfm globally."
DEFVAL { disable }
::= { cfm 1 }
-- cfmLearnRmepEn OBJECT-TYPE
-- SYNTAX INTEGER {enable(1),disable(2)}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable or disable learning remote MEP globally."
-- DEFVAL { 2 }
-- ::= { cfm 2 }
-- cfmCcmDatabaseSize OBJECT-TYPE
-- SYNTAX Integer32 (1..2048)
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The max number of learning remote MEPs."
-- DEFVAL { 100 }
-- ::= { cfm 3 }
cfmLinktraceCacheEn OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable caching linktrace results globally."
DEFVAL { disable }
::= { cfm 4 }
cfmLinktraceCacheSize OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max number of caching linktrace results."
DEFVAL { 100 }
::= { cfm 5 }
cfmLinktraceHoldTime OBJECT-TYPE
SYNTAX Integer32 (60..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval of reserving linktraace cache entry, unit is minute."
DEFVAL { 60 }
::= { cfm 6 }
cfmMipFdbDatabaseSize OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max number of learning MIP fdb entries."
DEFVAL { 100 }
::= { cfm 7 }
cfmMipFdbHoldTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval of reserving MIP fdb entry, unit is minute. When fdb is static,
the value of hold time is 65535."
DEFVAL { 60 }
::= { cfm 8 }
cfmSFReasonLoc OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable that loss of continuity is signal fail reason."
DEFVAL { disable }
::= { cfm 11 }
cfmSFReasonRxRdi OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable that rdi of remote MEP is signal fail reason."
DEFVAL { disable }
::= { cfm 12 }
cfmSFReasonAisDefect OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable that ais condition of MEP is signal fail reason."
DEFVAL { disable }
::= { cfm 13 }
cfmMDErrorClearLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"According to MD level, clearing all errors in MD."
DEFVAL { 0 }
::= { cfm 14 }
cfmMipFdbClear OBJECT-TYPE
SYNTAX INTEGER {enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear all entries in MIP fdb database."
::= { cfm 15 }
cfmLinkTraceCacheClear OBJECT-TYPE
SYNTAX INTEGER {enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear all entries in linktrace cache."
::= { cfm 17 }
cfmMDTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMMDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm maintenance domain."
::= { cfm 18 }
cfmMDEntry OBJECT-TYPE
SYNTAX CFMMDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfm maintenance domain."
INDEX { cfmMDLevel }
::= { cfmMDTable 1 }
CFMMDEntry ::=
SEQUENCE {
cfmMDLevel Integer32,
cfmMDName OCTET STRING,
cfmMDRowStatus RowStatus
}
cfmMDLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMDTable. Maintenance domain level number."
::= { cfmMDEntry 1 }
cfmMDName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..43))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm maintenance domain name."
::= { cfmMDEntry 2 }
cfmMDRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmMDEntry 6 }
cfmMATable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMMAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm maintenance association."
::= { cfm 19 }
cfmMAEntry OBJECT-TYPE
SYNTAX CFMMAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfm maintenance domain."
INDEX { cfmMAIndex, cfmMAVlan }
::= { cfmMATable 1 }
CFMMAEntry ::=
SEQUENCE
{
cfmMAIndex Integer32,
cfmMAVlan Integer32,
cfmMAName OCTET STRING,
cfmMARowStatus RowStatus,
cfmMACCEn INTEGER,
cfmMACCVlanPriority Integer32,
cfmMAErrorWriteEn INTEGER,
cfmMAAisSuppressAlarm INTEGER
}
cfmMAIndex OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMATable. The MA belongs to the MD and this is the MD level."
::= { cfmMAEntry 1 }
cfmMAVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMATable. The MA associates to the vlan."
::= { cfmMAEntry 2 }
cfmMAName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..43))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm maintenance association name."
::= { cfmMAEntry 3 }
cfmMARowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmMAEntry 7 }
cfmMACCEn OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable continuity check."
DEFVAL { disable }
::= { cfmMAEntry 8 }
cfmMACCVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan priority for the continuirty check packets."
DEFVAL { 7 }
::= { cfmMAEntry 9 }
cfmMAErrorWriteEn OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable writing errors to error cache."
DEFVAL { disable }
::= { cfmMAEntry 10 }
cfmMAAisSuppressAlarm OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable suppressing alarms when enter AIS condition."
DEFVAL { disable }
::= { cfmMAEntry 11 }
cfmMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm maintenance domain end point."
::= { cfm 20 }
cfmMepEntry OBJECT-TYPE
SYNTAX CFMMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfm maintenance domain end point."
INDEX { cfmMepLevel, cfmMepVlan, cfmMepId }
::= { cfmMepTable 1 }
CFMMepEntry ::=
SEQUENCE {
cfmMepLevel Integer32,
cfmMepVlan Integer32,
cfmMepId Integer32,
cfmMepDirection INTEGER,
cfmMepInterval INTEGER,
cfmMepIfIndex INTEGER,
cfmMepRowStatus RowStatus,
cfmMepRdi INTEGER,
cfmMepAisCondition INTEGER
}
cfmMepLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMepTable. The MEP belongs to the MD and this is the MD level."
::= { cfmMepEntry 1 }
cfmMepVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMepTable. The MEP belongs to the MA and the MA associates to the vlan."
::= { cfmMepEntry 2 }
cfmMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMepTable. The MEP id is exclusive in same MD and MA."
::= { cfmMepEntry 3 }
cfmMepDirection OBJECT-TYPE
SYNTAX INTEGER {down(0),up(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up MEP or down MEP."
::= { cfmMepEntry 4 }
cfmMepInterval OBJECT-TYPE
SYNTAX INTEGER (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval of MEP continuity check message."
::= { cfmMepEntry 5 }
cfmMepIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port ifindex and the MEP is configured on the port"
::= { cfmMepEntry 6 }
cfmMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmMepEntry 10 }
cfmMepRdi OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rdi status, only clearing MEP rdi is allowed."
::= { cfmMepEntry 11 }
cfmMepAisCondition OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ais condition. When ais packet is received and cc is disabled or LOC defect on MEP,
MEP will enter Ais condition."
::= { cfmMepEntry 12 }
cfmRMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMRMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of remote cfm maintenance domain end point."
::= { cfm 21 }
cfmRMepEntry OBJECT-TYPE
SYNTAX CFMRMepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of remote cfm maintenance domain end point."
INDEX { cfmRMepLevel, cfmRMepVlan, cfmRMepId }
::= { cfmRMepTable 1 }
CFMRMepEntry ::=
SEQUENCE {
cfmRMepLevel Integer32,
cfmRMepVlan Integer32,
cfmRMepId Integer32,
cfmRMepIfIndex INTEGER,
cfmRMepAddr OCTET STRING,
cfmRMepFlag INTEGER,
cfmRMepRowStatus RowStatus,
cfmRMepRdi INTEGER
}
cfmRMepLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmRMepTable. The remote MEP belongs to the MD and this is the MD level."
::= { cfmRMepEntry 1 }
cfmRMepVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmRMepTable. The remote MEP belongs to the MA and the MA associates
to the vlan."
::= { cfmRMepEntry 2 }
cfmRMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmRMepTable. The MEP id is exclusive in same MD and MA."
::= { cfmRMepEntry 3 }
cfmRMepIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port ifindex and the remote MEP is configured on the port."
::= { cfmRMepEntry 4 }
cfmRMepAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote MEP mac adress."
::= { cfmRMepEntry 5 }
cfmRMepFlag OBJECT-TYPE
SYNTAX INTEGER {configured(1),macConfigured(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remote MEP flag, when the flag is 1, the remote MEP is configured but
the remote MEP mac is not configured. When the flag is 2, the remote MEP
mac is configured."
::= { cfmRMepEntry 6 }
cfmRMepRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmRMepEntry 10 }
cfmRMepRdi OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rdi status of remote mep."
::= { cfmRMepEntry 11 }
cfmMipTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm maintenance domain intermediate point."
::= { cfm 22 }
cfmMipEntry OBJECT-TYPE
SYNTAX CFMMipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfm maintenance domain intermediate point."
INDEX { cfmMipLevel, cfmMipVlan, cfmMipIfIndex }
::= { cfmMipTable 1 }
CFMMipEntry ::=
SEQUENCE {
cfmMipLevel Integer32,
cfmMipVlan Integer32,
cfmMipIfIndex Integer32,
cfmMipRowStatus RowStatus
}
cfmMipLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMipTable. The MIP belongs to the MD and this is the MD level."
::= { cfmMipEntry 1 }
cfmMipVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMipTable. The MIP belongs to the MA and the MA associates to the vlan."
::= { cfmMipEntry 2 }
cfmMipIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port ifindex and the MIP is configured on the port."
::= { cfmMipEntry 3 }
cfmMipRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmMipEntry 7 }
cfmAisServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMAisServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of alarm indication signal server."
::= { cfm 23 }
cfmAisServerEntry OBJECT-TYPE
SYNTAX CFMAisServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of alarm indication signal server."
INDEX { cfmAisServerIfIndex }
::= { cfmAisServerTable 1 }
CFMAisServerEntry ::=
SEQUENCE {
cfmAisServerIfIndex Integer32,
cfmAisServerLevel Integer32,
cfmAisServerInterval Integer32,
cfmAisServerRowStatus RowStatus
}
cfmAisServerIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port ifindex and the ais server is configured on the port."
::= { cfmAisServerEntry 1 }
cfmAisServerLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index of cfmAisServerTable. The ais server belongs to the MD and this is the
MD level."
::= { cfmAisServerEntry 2 }
cfmAisServerInterval OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmission interval of ais packet, only can be 1 second or 60 seconds."
DEFVAL { 1 }
::= { cfmAisServerEntry 3 }
cfmAisServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmAisServerEntry 7 }
cfmAisTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMAisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm MEP ais enable/disable."
::= { cfm 24 }
cfmAisEntry OBJECT-TYPE
SYNTAX CFMAisEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfm mep ais enable/disable."
INDEX { cfmAisLevel, cfmAisVlan, cfmAisMepId }
::= { cfmAisTable 1 }
CFMAisEntry ::=
SEQUENCE {
cfmAisLevel Integer32,
cfmAisVlan Integer32,
cfmAisMepId Integer32,
cfmAisIfIndex Integer32,
cfmAisConfigLoc INTEGER,
cfmAisConfigMismerge INTEGER,
cfmAisConfigUnexpectedMep INTEGER,
cfmAisConfigUnexpectedMegLevel INTEGER,
cfmAisConfigUnexpectedPeriod INTEGER,
cfmAisPacketType INTEGER,
cfmAisDestAddr MacAddress,
cfmAisDestLevel INTEGER,
cfmAisRowStatus RowStatus,
cfmAisDetectLoc INTEGER,
cfmAisDetectMismerge INTEGER,
cfmAisDetectUnexpectedMep INTEGER,
cfmAisDetectUnexpectedMegLevel INTEGER,
cfmAisDetectUnexpectedPeriod INTEGER
}
cfmAisLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMepTable. The ais MEP belongs to the MD and this is the MD level."
::= { cfmAisEntry 1 }
cfmAisVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmAisTable. The ais MEP belongs to the MA and the MA associates to
the vlan."
::= { cfmAisEntry 2 }
cfmAisMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmAisTable. The MEP id is exclusive in same MD and MA."
::= { cfmAisEntry 3 }
cfmAisIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port ifindex and the ais MEP is configured on the port"
::= { cfmAisEntry 4 }
cfmAisConfigLoc OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais packet will be sent when detecting loss of continuity."
DEFVAL { disable }
::= { cfmAisEntry 5 }
cfmAisConfigMismerge OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais packet will be sent when detecting incorrect MD or MA name."
DEFVAL { disable }
::= { cfmAisEntry 6 }
cfmAisConfigUnexpectedMep OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais packet will be sent when detecting incorrect MEP id."
DEFVAL { disable }
::= { cfmAisEntry 7 }
cfmAisConfigUnexpectedMegLevel OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais packet will be sent when detecting incorrect MD level."
DEFVAL { disable }
::= { cfmAisEntry 8 }
cfmAisConfigUnexpectedPeriod OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais packet will be sent when detecting mismatch of CC period."
DEFVAL { disable }
::= { cfmAisEntry 9 }
cfmAisPacketType OBJECT-TYPE
SYNTAX INTEGER {uniscast(1),multicast(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais packet type. When the type is multicast, cfmAisDestAddr will be invalid."
::= { cfmAisEntry 10 }
cfmAisDestAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais packet destination mac address."
::= { cfmAisEntry 11 }
cfmAisDestLevel OBJECT-TYPE
SYNTAX INTEGER (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ais destination level at which the AIS frames have to be sent."
::= { cfmAisEntry 12 }
cfmAisRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmAisEntry 16 }
cfmAisDetectLoc OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When detecting LOC defect, this flag will be true."
::= { cfmAisEntry 17 }
cfmAisDetectMismerge OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When detecting incorrect MD or MA name, this flag will be true."
::= { cfmAisEntry 18 }
cfmAisDetectUnexpectedMep OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When detecting incorrect MEP id, this flag will be true."
::= { cfmAisEntry 19 }
cfmAisDetectUnexpectedMegLevel OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When detecting incorrect MD level, this flag will be true."
::= { cfmAisEntry 20 }
cfmAisDetectUnexpectedPeriod OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When detecting mismatch of CC period, this flag will be true."
::= { cfmAisEntry 21 }
cfmLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of loopback remote MEP or MIP."
::= { cfm 25 }
cfmLoopbackEntry OBJECT-TYPE
SYNTAX CFMLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfmLoopbackTable."
INDEX { cfmLoopbackIndex }
::= { cfmLoopbackTable 1 }
CFMLoopbackEntry ::=
SEQUENCE {
cfmLoopbackIndex Integer32,
cfmLoopbackLevel Integer32,
cfmLoopbackVlan Integer32,
cfmLoopbackMepId Integer32,
cfmLoopbackFrameType INTEGER,
cfmLoopbackRMepId Integer32,
cfmLoopbackRmac MacAddress,
cfmLoopbackRepeat Integer32,
cfmLoopbackExp Integer32,
cfmLoopbackTimeout Integer32,
cfmLoopbackRowStatus RowStatus,
cfmLoopbackOperState INTEGER,
cfmLoopbackSuccessRate Integer32
}
cfmLoopbackIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfm loopback, Must be 1."
::= { cfmLoopbackEntry 1 }
cfmLoopbackLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback is initiated by a MEP and the MEP belongs to the MD and this is
the MD level."
::= { cfmLoopbackEntry 2 }
cfmLoopbackVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback is initiated by a MEP and the MEP belongs to the MA and the MA
associates to the vlan."
::= { cfmLoopbackEntry 3 }
cfmLoopbackMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback is initiated by a MEP and the MEP id is exclusive in same MD and MA."
::= { cfmLoopbackEntry 4 }
cfmLoopbackFrameType OBJECT-TYPE
SYNTAX INTEGER { unicast(1), multicast(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frame type of cfm loopback."
::= { cfmLoopbackEntry 5 }
cfmLoopbackRMepId OBJECT-TYPE
SYNTAX Integer32 (0..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP id. When frame type is unicast, this node is valid. if the remote MEP id
is 0, the value is invalid and cfmLoopbackRmac will be used."
::= { cfmLoopbackEntry 6 }
cfmLoopbackRmac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP or MEP mac address. if the cfmLoopbackRMepId isn't 0,
the node is invalid."
::= { cfmLoopbackEntry 7 }
cfmLoopbackRepeat OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Loopback repeat times."
::= { cfmLoopbackEntry 8 }
cfmLoopbackExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan priority of loopback packets."
::= { cfmLoopbackEntry 9 }
cfmLoopbackTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure time out of per loopback packet."
::= { cfmLoopbackEntry 10 }
cfmLoopbackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmLoopbackEntry 13 }
cfmLoopbackOperState OBJECT-TYPE
SYNTAX INTEGER { done(1), in-progress(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation status."
::= { cfmLoopbackEntry 14 }
cfmLoopbackSuccessRate OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Success-rate of the operation."
::= { cfmLoopbackEntry 15 }
cfmLinktraceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMLinktraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of linktrace remote MEP or MIP."
::= { cfm 26 }
cfmLinktraceEntry OBJECT-TYPE
SYNTAX CFMLinktraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfmLinktraceTable."
INDEX { cfmLinktraceIndex }
::= { cfmLinktraceTable 1 }
CFMLinktraceEntry ::=
SEQUENCE {
cfmLinktraceIndex Integer32,
cfmLinktraceLevel Integer32,
cfmLinktraceVlan Integer32,
cfmLinktraceMepId Integer32,
cfmLinktraceRMepId Integer32,
cfmLinktraceRmac MacAddress,
cfmLinktraceTtl Integer32,
cfmLinktraceExp Integer32,
cfmLinktraceTimeout Integer32,
cfmLinktraceEgressIdTLV INTEGER,
cfmLinktraceSenderIdTLV INTEGER,
cfmLinktraceOrganizationSpecTLV INTEGER,
cfmLinktraceRowStatus RowStatus,
cfmLinktraceOperState INTEGER
}
cfmLinktraceIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfm linktrace, Must be 1."
::= { cfmLinktraceEntry 1 }
cfmLinktraceLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Linktrace is initiated by a MEP, the MEP belongs to the MD and this is the MD level."
::= { cfmLinktraceEntry 2 }
cfmLinktraceVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Linktrace is initiated by a MEP, the MEP belongs to the MA and the MA
associates to the vlan."
::= { cfmLinktraceEntry 3 }
cfmLinktraceMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Linktrace is initiated by a MEP and the MEP id is exclusive in same MD and MA."
::= { cfmLinktraceEntry 4 }
cfmLinktraceRMepId OBJECT-TYPE
SYNTAX Integer32 (0..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP id. if the Remote MEP id is 0, cfmLinktraceRmac will be used."
::= { cfmLinktraceEntry 5 }
cfmLinktraceRmac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote MEP or MIP mac address. if the cfmLinktraceRMepId isn't 0,
this node is invalid."
::= { cfmLinktraceEntry 6 }
cfmLinktraceTtl OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of maximum hops."
::= { cfmLinktraceEntry 7 }
cfmLinktraceExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan priority of linktrace packets."
::= { cfmLinktraceEntry 8 }
cfmLinktraceTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure time out of per hop."
::= { cfmLinktraceEntry 9 }
cfmLinktraceEgressIdTLV OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The linktrace message will include Egress Identifier TLV."
::= { cfmLinktraceEntry 10 }
cfmLinktraceSenderIdTLV OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The linktrace message will include Sender Identifier TLV."
::= { cfmLinktraceEntry 11 }
cfmLinktraceOrganizationSpecTLV OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The linktrace message will include Organization Specific TLV."
::= { cfmLinktraceEntry 12 }
cfmLinktraceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and
Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { cfmLinktraceEntry 16 }
cfmLinktraceOperState OBJECT-TYPE
SYNTAX INTEGER { done(1), in-progress(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operation status."
::= { cfmLinktraceEntry 17 }
cfmMipFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMMipFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the cfm MIP mac address entry."
::= { cfm 29 }
cfmMipFdbEntry OBJECT-TYPE
SYNTAX CFMMipFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table stores the cfm MIP mac address entry."
INDEX { cfmMipFdbVlan, cfmMipFdbMacAddress, cfmMipFdbLevel }
::= { cfmMipFdbTable 1 }
CFMMipFdbEntry ::=
SEQUENCE {
cfmMipFdbVlan Integer32,
cfmMipFdbMacAddress MacAddress,
cfmMipFdbLevel Integer32,
cfmMipFdbIfIndex Integer32,
cfmMipFdbAgeTime Integer32
}
cfmMipFdbVlan OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMipFdbTable, identifying value for vlan."
::= { cfmMipFdbEntry 1 }
cfmMipFdbMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMipFdbTable, the mac address of MIP forwarding database entry."
::= { cfmMipFdbEntry 2 }
cfmMipFdbLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmMipFdbTable, the MIP belongs to the MD and this is the MD level."
::= { cfmMipFdbEntry 3 }
cfmMipFdbIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port ifindex, MIP fdb is learnt from the port or configured on the port."
::= { cfmMipFdbEntry 4 }
cfmMipFdbAgeTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval of reserving MIP fdb entry, unit is minute."
::= { cfmMipFdbEntry 5 }
cfmErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm reporting errors."
::= { cfm 30 }
cfmErrorEntry OBJECT-TYPE
SYNTAX CFMErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfmErrorTable."
INDEX { cfmErrorLevel, cfmErrorVlan, cfmErrorMepId, cfmErrorIndex }
::= { cfmErrorTable 1 }
CFMErrorEntry ::=
SEQUENCE {
cfmErrorLevel Integer32,
cfmErrorVlan Integer32,
cfmErrorMepId Integer32,
cfmErrorIndex Integer32,
cfmErrorRmac MacAddress,
cfmErrorReason INTEGER,
cfmErrorReportTime OCTET STRING
}
cfmErrorLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Errors are reported by a MEP, the MEP belongs to the MD and this is the MD level."
::= { cfmErrorEntry 1 }
cfmErrorVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Errors are reported by a MEP, the MEP belongs to the MA and the MA associates to
the vlan."
::= { cfmErrorEntry 2 }
cfmErrorMepId OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Errors are reported by a MEP and the MEP id is exclusive in same MD and MA."
::= { cfmErrorEntry 3 }
cfmErrorIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmErrorTable, the range is 1 to 5."
::= { cfmErrorEntry 4 }
cfmErrorRmac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of remote MEP."
::= { cfmErrorEntry 5 }
cfmErrorReason OBJECT-TYPE
SYNTAX INTEGER
{
rdi(2),
rdi-clear(3),
loc(4),
loc-clear(5),
unexpected-mep(6),
unexpected-mep-clear(7),
unexpected-period(8),
unexpected-period-clear(9),
mismerge(10),
mismerge-clear(11),
unexpected-meg-level(12),
unexpected-meg-level-clear(13),
recieve-ais(14),
no-receive-ais-in-35-period(15),
lck-receive-cause-ais(16),
lck-receive-cause-ais-clear(17),
enter-lck-condition(18),
exit-lck-condiftion(19),
enter-csf-condition(20),
exit-csf-condition(21),
rmep-first-packet-receive(22)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error reson is as follows:
rdi(2),
rdi-clear(3),
loc(4),
loc-clear(5),
unexpected-mep(6),
unexpected-mep-clear(7),
unexpected-period(8),
unexpected-period-clear(9),
mismerge(10),
mismerge-clear(11),
unexpected-meg-level(12),
unexpected-meg-level-clear(13),
recieve-ais(14),
no-receive-ais-in-35-period(15),
lck-receive-cause-ais(16),
lck-receive-cause-ais-clear(17),
enter-lck-condition(18),
exit-lck-condiftion(19),
enter-csf-condition(20),
exit-csf-condition(21),
rmep-first-packet-receive(22)"
::= { cfmErrorEntry 6 }
cfmErrorReportTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reporting time of the error."
::= { cfmErrorEntry 7 }
cfmLTCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMLTCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm linktrace cache."
::= { cfm 31 }
cfmLTCacheEntry OBJECT-TYPE
SYNTAX CFMLTCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfmLTCacheTable."
INDEX { cfmLTCacheIndex }
::= { cfmLTCacheTable 1 }
CFMLTCacheEntry ::=
SEQUENCE {
cfmLTCacheIndex Integer32,
cfmLTCacheLevel Integer32,
cfmLTCacheVlan Integer32,
cfmLTCacheTargetMacAddress MacAddress,
cfmLTCacheStartTime OCTET STRING,
cfmLTCacheAge Integer32,
cfmLTCacheHops Integer32,
cfmLTCacheTTL Integer32,
cfmLTCacheForwarded INTEGER,
cfmLTCacheTerminalMEP INTEGER,
cfmLTCacheRelayAction INTEGER,
cfmLTCacheIngressAction INTEGER,
cfmLTCacheIngressMacAddress MacAddress,
cfmLTCacheIngressIfName OCTET STRING,
cfmLTCacheEgressAction INTEGER,
cfmLTCacheEgressMacAddress MacAddress,
cfmLTCacheEgressIfName OCTET STRING,
cfmLTCacheLastEgressID MacAddress,
cfmLTCacheNextEgressID MacAddress
}
cfmLTCacheIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Linktrace cache index."
::= { cfmLTCacheEntry 1 }
cfmLTCacheLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Linktrace is initiated by a MEP, the MEP belongs to the MD and this is the MD level."
::= { cfmLTCacheEntry 2 }
cfmLTCacheVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Linktrace is initiated by a MEP, the MEP belongs to the MA and the MA associates to
the vlan."
::= { cfmLTCacheEntry 3 }
cfmLTCacheTargetMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Linktrace target mac address."
::= { cfmLTCacheEntry 4 }
cfmLTCacheStartTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of sending first linktrace message."
::= { cfmLTCacheEntry 5 }
cfmLTCacheAge OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Linktrace age time, unit is minute."
::= { cfmLTCacheEntry 6 }
cfmLTCacheHops OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of cfmLTCacheTable, the linktrace hop number and the range is 1 to 64."
::= { cfmLTCacheEntry 7 }
cfmLTCacheTTL OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When LTM is received and forwarded by switch, the TTL will minus one.
when the TTL equals one, the LTM will not be relayed."
::= { cfmLTCacheEntry 8 }
cfmLTCacheForwarded OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If LTM will be forwarded, this flag is true."
::= { cfmLTCacheEntry 9 }
cfmLTCacheTerminalMEP OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the LTM is received by terminal MEP and LTR is sent by the MEP,
this flag is true."
::= { cfmLTCacheEntry 10 }
cfmLTCacheRelayAction OBJECT-TYPE
SYNTAX INTEGER { relayNone(0), relayHit(1), relayFdb(2), relayMipFdb(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When LTM is received by terminal MEP or MIP, this flag is relayHit.
When LTM is forwarded by Fdb, this flag is relayFdb.
When LTM is forwarded by MIP Fdb, this flag is relayMipFdb."
::= { cfmLTCacheEntry 11 }
cfmLTCacheIngressAction OBJECT-TYPE
SYNTAX INTEGER { ingNone(0), ingOK(1),ingDown(2), ingBlocked(3) ,ingNotMemVlan(4)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the ingress port status is normal, this flag is ingOK.
When the ingress port is blocked by STP, this flag is ingBlocked."
::= { cfmLTCacheEntry 12 }
cfmLTCacheIngressMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of ingress port."
::= { cfmLTCacheEntry 13 }
cfmLTCacheIngressIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ingress interface name."
::= { cfmLTCacheEntry 14 }
cfmLTCacheEgressAction OBJECT-TYPE
SYNTAX INTEGER { egrNone(0), egrOK(1), egrDown(2), egrBlocked(3), egrNotMemVlan(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the egress port status is normal, this flag is egrOK.
When the egress port is blocked by STP, this flag is egrBlocked."
::= { cfmLTCacheEntry 15 }
cfmLTCacheEgressMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of egress port."
::= { cfmLTCacheEntry 16 }
cfmLTCacheEgressIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Egress interface name."
::= { cfmLTCacheEntry 17 }
cfmLTCacheLastEgressID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route mac address of the source switch which initiates the linktrace."
::= { cfmLTCacheEntry 18 }
cfmLTCacheNextEgressID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route mac address of the switch which transmits this LTR."
::= { cfmLTCacheEntry 19 }
cfmLTResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CFMLTResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of cfm linktrace result."
::= { cfm 32 }
cfmLTResultEntry OBJECT-TYPE
SYNTAX CFMLTResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of cfmLTResultTable."
INDEX { cfmLTResultHops }
::= { cfmLTResultTable 1 }
CFMLTResultEntry ::=
SEQUENCE {
cfmLTResultHops Integer32,
cfmLTResultTTL Integer32,
cfmLTResultForwarded INTEGER,
cfmLTResultTerminalMEP INTEGER,
cfmLTResultRelayAction INTEGER,
cfmLTResultIngressAction INTEGER,
cfmLTResultIngressMacAddress MacAddress,
cfmLTResultIngressIfName OCTET STRING,
cfmLTResultEgressAction INTEGER,
cfmLTResultEgressMacAddress MacAddress,
cfmLTResultEgressIfName OCTET STRING,
cfmLTResultLastEgressID MacAddress,
cfmLTResultNextEgressID MacAddress
}
cfmLTResultHops OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of cfmLTResultTable, the linktrace hop number and the range is 1 to 64."
::= { cfmLTResultEntry 1 }
cfmLTResultTTL OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When LTM is received and forwarded by switch, the TTL will minus one.
when the TTL equals one, the LTM will not be relayed."
::= { cfmLTResultEntry 2 }
cfmLTResultForwarded OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If LTM will be forwarded, this flag is true."
::= { cfmLTResultEntry 3 }
cfmLTResultTerminalMEP OBJECT-TYPE
SYNTAX INTEGER {enable(1),disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the LTM is received by terminal MEP and LTR is sent by the MEP,
this flag is true."
::= { cfmLTResultEntry 4 }
cfmLTResultRelayAction OBJECT-TYPE
SYNTAX INTEGER { relayHit(1), relayFdb(2), relayMipFdb(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When LTM is received by terminal MEP or MIP, this flag is relayHit.
When LTM is forwarded by Fdb, this flag is relayFdb.
When LTM is forwarded by MIP Fdb, this flag is relayMipFdb."
::= { cfmLTResultEntry 5 }
cfmLTResultIngressAction OBJECT-TYPE
SYNTAX INTEGER { ingOK(1), ingBlocked(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the ingress port status is normal, this flag is ingOK.
When the ingress port is blocked by STP, this flag is ingBlocked."
::= { cfmLTResultEntry 6 }
cfmLTResultIngressMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of ingress port."
::= { cfmLTResultEntry 7 }
cfmLTResultIngressIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ingress interface name."
::= { cfmLTResultEntry 8 }
cfmLTResultEgressAction OBJECT-TYPE
SYNTAX INTEGER { egrOK(1), egrDown(2), egrBlocked(3), egrNotMemVlan(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the egress port status is normal, this flag is egrOK.
When the egress port is blocked by STP, this flag is egrBlocked."
::= { cfmLTResultEntry 9 }
cfmLTResultEgressMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of egress port."
::= { cfmLTResultEntry 10 }
cfmLTResultEgressIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Egress interface name."
::= { cfmLTResultEntry 11 }
cfmLTResultLastEgressID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route mac address of the source switch which initiates the linktrace."
::= { cfmLTResultEntry 12 }
cfmLTResultNextEgressID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route mac address of the switch which transmits this LTR."
::= { cfmLTResultEntry 13 }
cfmTrap OBJECT IDENTIFIER ::= { cfm 1000 }
cfmErrorTrap NOTIFICATION-TYPE
OBJECTS { cfmErrorRmac, cfmErrorReason }
STATUS current
DESCRIPTION
"Cfm error Trap"
::= { cfmTrap 1 }
--efmOAM OBJECT IDENTIFIER ::= { OID 84 }
efmOAMIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF EFMOAMIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure efm OAM on an interface."
::= { efm 1 }
efmOAMIfEntry OBJECT-TYPE
SYNTAX EFMOAMIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of efmOAMIfTable."
INDEX { efmOAMIfIndex }
::= { efmOAMIfTable 1 }
EFMOAMIfEntry ::=
SEQUENCE {
efmOAMIfIndex Integer32,
efmOAMEnable INTEGER,
efmOAMMode INTEGER,
efmOAMMinRate Integer32,
efmOAMMaxRate Integer32,
efmOAMLinkMonitorEn INTEGER,
efmOAMLinkMonitorSupported INTEGER,
efmOAMLinkMonitorFrameHigh Integer32,
efmOAMLinkMonitorFrameLow Integer32,
efmOAMLinkMonitorFrameWin Integer32,
efmOAMLinkMonitorFrameSecHigh Integer32,
efmOAMLinkMonitorFrameSecLow Integer32,
efmOAMLinkMonitorFrameSecWin Integer32,
efmOAMLinkMonitorHighThreAction INTEGER,
efmOAMRemoteLoopbackSupported INTEGER,
efmOAMRemoteLoopbackTimeout Integer32,
efmOAMRemoteLoopbackState INTEGER,
efmOAMTimeout Integer32,
efmOAMRemoteFailureCriticalEvent INTEGER,
efmOAMRemoteFailureDyingGasp INTEGER,
efmOAMRemoteFailureLinkFailure INTEGER
}
efmOAMIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface index."
::= { efmOAMIfEntry 1 }
efmOAMEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Ethernet OAM module on a port.The meanings of the values are:
enable(1);disable(2)."
DEFVAL { disable }
::= { efmOAMIfEntry 2 }
efmOAMMode OBJECT-TYPE
SYNTAX INTEGER {active(1), passive(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the DTE to active mode or passive mode.The meanings of the values are:
active(1);passive(2)."
DEFVAL { passive }
::= { efmOAMIfEntry 3 }
efmOAMMinRate OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the OAMPDU minimum number of PDUS per second. this timer in the range <1-10>."
DEFVAL { 1 }
::= { efmOAMIfEntry 4 }
efmOAMMaxRate OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the OAMPDU maximum number of PDUS per second. this timer in the range <1-10>."
DEFVAL { 10 }
::= { efmOAMIfEntry 5 }
efmOAMLinkMonitorEn OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on or off link monitoring on an interface.The meanings of the values are:
enable(1);disable(2)."
DEFVAL { enable }
::= { efmOAMIfEntry 6 }
efmOAMLinkMonitorSupported OBJECT-TYPE
SYNTAX INTEGER {supported(1), un-supported(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set link monitoring on an interface.The meanings of the values are:
supported(1);un-supported(2)."
DEFVAL { supported }
::= { efmOAMIfEntry 7 }
efmOAMLinkMonitorFrameHigh OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set value of the high threshold for errored frames. The meanings of the values are:
none(0) - no high threshold is configured;
Value of the high threshold <1-65535>."
DEFVAL { 0 }
::= { efmOAMIfEntry 8 }
efmOAMLinkMonitorFrameLow OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set value of the low threshold for errored frames in the range <0-65535>."
DEFVAL { 1 }
::= { efmOAMIfEntry 9 }
efmOAMLinkMonitorFrameWin OBJECT-TYPE
SYNTAX Integer32(10..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set size of frame event window in the range <10-600>."
DEFVAL { 10 }
::= { efmOAMIfEntry 10 }
efmOAMLinkMonitorFrameSecHigh OBJECT-TYPE
SYNTAX Integer32(0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set value of the High threshold for the number of errored frame-seconds. The meanings of the values are:
none(0) - no high threshold is configured;
Value of the high threshold <1-900>."
DEFVAL { 0 }
::= { efmOAMIfEntry 11 }
efmOAMLinkMonitorFrameSecLow OBJECT-TYPE
SYNTAX Integer32(1..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set value of the Low threshold for the number of errored frame-seconds in the range <1-900>."
DEFVAL { 1 }
::= { efmOAMIfEntry 12 }
efmOAMLinkMonitorFrameSecWin OBJECT-TYPE
SYNTAX Integer32(100..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Window for frame-seconds events in the range <100-9000>."
DEFVAL { 1000 }
::= { efmOAMIfEntry 13 }
efmOAMLinkMonitorHighThreAction OBJECT-TYPE
SYNTAX INTEGER {error-disable-interface(1), none(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set action when high threshold is detected.The meanings of the values are:
error-disable-interface(1) - Disable the interface when high threshold is exceeded;
none(2)."
DEFVAL { none }
::= { efmOAMIfEntry 14 }
efmOAMRemoteLoopbackSupported OBJECT-TYPE
SYNTAX INTEGER {supported(1), un-supported(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set remote loopback on a interface. The meanings of the values are:
un-supported(2); supported(1)."
DEFVAL { un-supported }
::= { efmOAMIfEntry 15 }
efmOAMRemoteLoopbackTimeout OBJECT-TYPE
SYNTAX Integer32(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set remote loopback on a interface.."
DEFVAL { 0 }
::= { efmOAMIfEntry 16 }
efmOAMRemoteLoopbackState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set remote loopback state on a interface.."
DEFVAL { disable }
::= { efmOAMIfEntry 17 }
efmOAMTimeout OBJECT-TYPE
SYNTAX Integer32(2..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the LOCAL_LOST_LINK_TIMER and start an Ethernet OAM discovery process."
DEFVAL { 5 }
::= { efmOAMIfEntry 18 }
efmOAMRemoteFailureCriticalEvent OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote Failure Action Critical Link Event on an interface.
The meanings of the values are:enable(1);disable(2)."
DEFVAL { disable }
::= { efmOAMIfEntry 19 }
efmOAMRemoteFailureDyingGasp OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TRemote Failure Action Dying Gasp Event on an interface.
The meanings of the values are:enable(1);disable(2)."
DEFVAL { disable }
::= { efmOAMIfEntry 20 }
efmOAMRemoteFailureLinkFailure OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote Failure Action Link Fault Event on an interface.
The meanings of the values are:enable(1);disable(2)."
DEFVAL { disable }
::= { efmOAMIfEntry 21 }
--efmOAMTestLoopbackTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF EFMOAMTestLoopbackEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Test efm OAM loopback on an interface."
-- ::= { efm 2 }
--
--efmOAMTestLoopbackEntry OBJECT-TYPE
-- SYNTAX EFMOAMTestLoopbackEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "Entry of efmOAMTestLoopbackTable."
-- INDEX { efmOAMTestLoopbackIndex }
-- ::= { efmOAMTestLoopbackTable 1 }
--
--EFMOAMTestLoopbackEntry ::=
-- SEQUENCE {
-- efmOAMTestLoopbackIndex Integer32,
-- efmOAMTestLoopbackIfindex Integer32,
-- efmOAMTestLoopbackVlanId Integer32,
-- efmOAMTestLoopbackMac MacAddress,
-- efmOAMTestLoopbackCount Integer32,
-- efmOAMTestLoopbackRowstatus RowStatus
-- }
--
--efmOAMTestLoopbackIndex OBJECT-TYPE
-- SYNTAX Integer32 (1)
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION "Loopback operaion index."
-- ::= { efmOAMTestLoopbackEntry 1 }
--
--efmOAMTestLoopbackIfindex OBJECT-TYPE
-- SYNTAX Integer32 (1..65535)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Interface index to send test packet."
-- ::= { efmOAMTestLoopbackEntry 2 }
--
--efmOAMTestLoopbackVlanId OBJECT-TYPE
-- SYNTAX Integer32 (0..4094)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Interface index to send test packet."
-- DEFVAL { 0 }
-- ::= { efmOAMTestLoopbackEntry 3 }
--
--efmOAMTestLoopbackMac OBJECT-TYPE
-- SYNTAX MacAddress
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Mac address to send test packet."
-- ::= { efmOAMTestLoopbackEntry 4 }
--
--efmOAMTestLoopbackCount OBJECT-TYPE
-- SYNTAX Integer32 (1..10000)
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION "Interface index to send test packet."
-- ::= { efmOAMTestLoopbackEntry 5 }
--
--efmOAMTestLoopbackRowstatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "The status of this conceptual row. Now only realize CreateAndGo and
-- Destroy and Active.
-- 1 means Active
-- 4 means CreateAndGo
-- 6 means Destroy."
-- ::= { efmOAMTestLoopbackEntry 10 }
efmOAMDiscoveryTable OBJECT-TYPE
SYNTAX SEQUENCE OF EFMOAMDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get efm OAM discovery state on an interface."
::= { efm 3 }
efmOAMDiscoveryEntry OBJECT-TYPE
SYNTAX EFMOAMDiscoveryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of efmOAMDiscoveryTable."
INDEX { efmOAMDiscoveryIfIndex }
::= { efmOAMDiscoveryTable 1 }
EFMOAMDiscoveryEntry ::=
SEQUENCE {
efmOAMDiscoveryIfIndex Integer32,
efmOAMDiscoveryLocalMode INTEGER,
efmOAMDiscoveryLocalUnidirection INTEGER,
efmOAMDiscoveryLocalLinkMonitor INTEGER,
efmOAMDiscoveryLocalRemoteLoopback INTEGER,
efmOAMDiscoveryLocalMibRetrieve INTEGER,
efmOAMDiscoveryLocalMtuSize Integer32,
efmOAMDiscoveryLocalPortStatus INTEGER,
efmOAMDiscoveryLocalLoopbackStatus INTEGER,
efmOAMDiscoveryLocalPduRevision Integer32,
efmOAMDiscoveryRemoteMacAddress MacAddress,
efmOAMDiscoveryRemotePduRevision Integer32,
efmOAMDiscoveryRemoteVendor OCTET STRING,
efmOAMDiscoveryRemoteMode INTEGER,
efmOAMDiscoveryRemoteUnidirection INTEGER,
efmOAMDiscoveryRemoteLinkMonitor INTEGER,
efmOAMDiscoveryRemoteRemoteLoopback INTEGER,
efmOAMDiscoveryRemoteMibRetrieve INTEGER,
efmOAMDiscoveryRemoteMtuSize Integer32
}
efmOAMDiscoveryIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface index."
::= { efmOAMDiscoveryEntry 1 }
efmOAMDiscoveryLocalMode OBJECT-TYPE
SYNTAX INTEGER { active(1), passive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local mode."
::= { efmOAMDiscoveryEntry 2 }
efmOAMDiscoveryLocalUnidirection OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local unidirection."
::= { efmOAMDiscoveryEntry 3 }
efmOAMDiscoveryLocalLinkMonitor OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local link monitor."
::= { efmOAMDiscoveryEntry 4 }
efmOAMDiscoveryLocalRemoteLoopback OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local remote loopback."
::= { efmOAMDiscoveryEntry 5 }
efmOAMDiscoveryLocalMibRetrieve OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local mib retrieve."
::= { efmOAMDiscoveryEntry 6}
efmOAMDiscoveryLocalMtuSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local mtu size."
::= { efmOAMDiscoveryEntry 7 }
efmOAMDiscoveryLocalPortStatus OBJECT-TYPE
SYNTAX INTEGER { invalid(0), fault(1), active-send-local(2), passive-wait(3), send-local-remote(4),send-local-remote-ok(5), send-any(6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local port status."
::= { efmOAMDiscoveryEntry 8 }
efmOAMDiscoveryLocalLoopbackStatus OBJECT-TYPE
SYNTAX INTEGER { local-loopback(1), remote-loopback(2), no-loopback(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local loopback status."
::= { efmOAMDiscoveryEntry 9 }
efmOAMDiscoveryLocalPduRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local pdu revision."
::= { efmOAMDiscoveryEntry 10 }
efmOAMDiscoveryRemoteMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote mac addess."
::= { efmOAMDiscoveryEntry 11 }
efmOAMDiscoveryRemotePduRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote pdu revision."
::= { efmOAMDiscoveryEntry 12 }
efmOAMDiscoveryRemoteVendor OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote vendor."
::= { efmOAMDiscoveryEntry 13 }
efmOAMDiscoveryRemoteMode OBJECT-TYPE
SYNTAX INTEGER { active(1), passive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Mode."
::= { efmOAMDiscoveryEntry 14 }
efmOAMDiscoveryRemoteUnidirection OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote unidirection."
::= { efmOAMDiscoveryEntry 15 }
efmOAMDiscoveryRemoteLinkMonitor OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote link monitor."
::= { efmOAMDiscoveryEntry 16 }
efmOAMDiscoveryRemoteRemoteLoopback OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote loopback."
::= { efmOAMDiscoveryEntry 17 }
efmOAMDiscoveryRemoteMibRetrieve OBJECT-TYPE
SYNTAX INTEGER { supported(1), un-supported(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote mib retrieve."
::= { efmOAMDiscoveryEntry 18 }
efmOAMDiscoveryRemoteMtuSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote mtu size."
::= { efmOAMDiscoveryEntry 19 }
efmOAMStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF EFMOAMStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get efm OAM state on an interface."
::= { efm 4 }
efmOAMStateEntry OBJECT-TYPE
SYNTAX EFMOAMStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of efmOAMStateTable."
INDEX { efmOAMStateIfIndex }
::= { efmOAMStateTable 1 }
EFMOAMStateEntry ::=
SEQUENCE {
efmOAMStateIfIndex Integer32,
efmOAMStateLocalLinkStatus INTEGER,
efmOAMStateLocalPduStatus INTEGER,
efmOAMStateLocalSatisfied INTEGER,
efmOAMStateLocalStable INTEGER,
efmOAMStateRemoteStateValid INTEGER,
efmOAMStateRemoteStable INTEGER,
efmOAMStateLocalPaserState INTEGER,
efmOAMStateLocalMultiplexerState INTEGER,
efmOAMStateRemotePaserState INTEGER,
efmOAMStateRemoteMultiplexerState INTEGER
}
efmOAMStateIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface index."
::= { efmOAMStateEntry 1 }
efmOAMStateLocalLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
ok(1),
fault(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local link status.
OK(1),FAULT(2)."
::= { efmOAMStateEntry 2 }
efmOAMStateLocalPduStatus OBJECT-TYPE
SYNTAX INTEGER
{
lfInfo(1),
rxInfo(2),
info(3),
any(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local pdu status.
LF_INFO(1),RX_INFO(2),INFO(3),ANY(4)."
::= { efmOAMStateEntry 3 }
efmOAMStateLocalSatisfied OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local Satisfied.
True(1),False(2)."
::= { efmOAMStateEntry 4 }
efmOAMStateLocalStable OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local Stable.
True(1),False(2)."
::= { efmOAMStateEntry 5 }
efmOAMStateRemoteStateValid OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote State valid.
True(1),False(2)."
::= { efmOAMStateEntry 6 }
efmOAMStateRemoteStable OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Stable.
True(1),False(2)."
::= { efmOAMStateEntry 7 }
efmOAMStateLocalPaserState OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
loopback(2),
discard(3),
invalid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local Parser State.
Forward(1),Loopback(2),Discard(3),Invalid(4)."
::= { efmOAMStateEntry 8 }
efmOAMStateLocalMultiplexerState OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2),
invalid(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local Multiplexer State.
Forward(1),Discard(2),Invalid(3)."
::= { efmOAMStateEntry 9 }
efmOAMStateRemotePaserState OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
loopback(2),
discard(3),
invalid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Parser State.
Forward(1),Loopback(2),Discard(3),Invalid(4)."
::= { efmOAMStateEntry 10 }
efmOAMStateRemoteMultiplexerState OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2),
invalid(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote Multiplexer State.
Forward(1),Discard(2),Invalid(3)."
::= { efmOAMStateEntry 11 }
efmOAMStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF EFMOAMStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get efm OAM statistic on an interface."
::= { efm 5 }
efmOAMStatisticEntry OBJECT-TYPE
SYNTAX EFMOAMStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of efmOAMStatisticTable."
INDEX { efmOAMStatisticIfIndex }
::= { efmOAMStatisticTable 1 }
EFMOAMStatisticEntry ::=
SEQUENCE {
efmOAMStatisticIfIndex Integer32,
efmOAMPduInfomationTx Integer32,
efmOAMPduInfomationRx Integer32,
efmOAMPduEvtNotificationTx Integer32,
efmOAMPduEvtNotificationRx Integer32,
efmOAMPduLoopbackControlTx Integer32,
efmOAMPduLoopbackControlRx Integer32,
efmOAMPduUnsupportedRx Integer32,
efmOAMLocalLinkFaultRecords Integer32,
efmOAMLocalDyingGaspRecords Integer32,
efmOAMLocalCriticalEvtRecords Integer32,
efmOAMRemoteLinkFaultRecords Integer32,
efmOAMRemoteDyingGaspRecords Integer32,
efmOAMRemoteCriticalEvtRecords Integer32,
efmOAMLocalErrorFrameRecords Integer32,
efmOAMLocalErrorFrameSecondRecords Integer32,
efmOAMRemoteErrorSymbolPeriodRecords Integer32,
efmOAMRemoteErrorFrameRecords Integer32,
efmOAMRemoteErrorFramePeriodRecords Integer32,
efmOAMRemoteErrorFrameSecondRecords Integer32,
efmOAMLoopbackTestPktsSent Integer32,
efmOAMLoopbackTestPktsRecv Integer32,
efmOAMLoopbackTestPercentValidRate Integer32
}
efmOAMStatisticIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface index."
::= { efmOAMStatisticEntry 1 }
efmOAMPduInfomationTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information OAMPDU Tx."
::= { efmOAMStatisticEntry 2 }
efmOAMPduInfomationRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Information OAMPDU Rx."
::= { efmOAMStatisticEntry 3 }
efmOAMPduEvtNotificationTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Event Notification OAMPDU Tx."
::= { efmOAMStatisticEntry 4 }
efmOAMPduEvtNotificationRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Event Notification OAMPDU Rx."
::= { efmOAMStatisticEntry 5 }
efmOAMPduLoopbackControlTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loopback Control OAMPDU Tx."
::= { efmOAMStatisticEntry 6 }
efmOAMPduLoopbackControlRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loopback Control OAMPDU Rx."
::= { efmOAMStatisticEntry 7 }
efmOAMPduUnsupportedRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Unsupported OAMPDU Rx."
::= { efmOAMStatisticEntry 8 }
efmOAMLocalLinkFaultRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local ink Fault records."
::= { efmOAMStatisticEntry 9 }
efmOAMLocalDyingGaspRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local dying Gasp records."
::= { efmOAMStatisticEntry 10 }
efmOAMLocalCriticalEvtRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local critical Event records."
::= { efmOAMStatisticEntry 11 }
efmOAMRemoteLinkFaultRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote link Fault records."
::= { efmOAMStatisticEntry 12 }
efmOAMRemoteDyingGaspRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote dying Gasp records."
::= { efmOAMStatisticEntry 13 }
efmOAMRemoteCriticalEvtRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote critical Event records."
::= { efmOAMStatisticEntry 14 }
efmOAMLocalErrorFrameRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local errored Frame records."
::= { efmOAMStatisticEntry 15 }
efmOAMLocalErrorFrameSecondRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local errored frame Seconds records."
::= { efmOAMStatisticEntry 16 }
efmOAMRemoteErrorSymbolPeriodRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote errored Symbol Period records."
::= { efmOAMStatisticEntry 17 }
efmOAMRemoteErrorFrameRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote errored Frame records."
::= { efmOAMStatisticEntry 18 }
efmOAMRemoteErrorFramePeriodRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote errored Frame Period records."
::= { efmOAMStatisticEntry 19 }
efmOAMRemoteErrorFrameSecondRecords OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote errored Frame Seconds records."
::= { efmOAMStatisticEntry 20 }
efmOAMLoopbackTestPktsSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Test packet is sended."
::= { efmOAMStatisticEntry 21 }
efmOAMLoopbackTestPktsRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Test packet is received."
::= { efmOAMStatisticEntry 22 }
efmOAMLoopbackTestPercentValidRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Percent valid rate."
::= { efmOAMStatisticEntry 23 }
-- ptp OBJECT IDENTIFIER ::= { OID 85 }
ptpGlobalInfo OBJECT IDENTIFIER ::= { ptp 1 }
--ptpDomainIndex OBJECT-TYPE
-- SYNTAX Integer32 (0..255)
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "Ptp domain index."
-- ::= { ptpGlobalInfo 1 }
ptpPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp port number."
::= { ptpGlobalInfo 1 }
ptpUtcOffset OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp utc offset."
::= { ptpGlobalInfo 2 }
ptpLocalClockIdentity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp local clock identiry."
::= { ptpGlobalInfo 3 }
ptpBMCRecMem OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc reciver member"
::= { ptpGlobalInfo 4 }
ptpBMCParentClockId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc parent clock id."
::= { ptpGlobalInfo 5 }
ptpBMCParentPortNum OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc parent port number."
::= { ptpGlobalInfo 6 }
ptpBMCMeanPathDelay OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc mean path delay."
::= { ptpGlobalInfo 7 }
ptpBMCOffsetFromMaster OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc offset from master."
::= { ptpGlobalInfo 8 }
ptpBMCStepRemoved OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc step removed."
::= { ptpGlobalInfo 9 }
ptpBMCGMClockId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm clock id."
::= { ptpGlobalInfo 10 }
ptpBMCGMPriority1 OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm priority1."
::= { ptpGlobalInfo 11 }
ptpBMCGMPriority2 OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm priority2."
::= { ptpGlobalInfo 12 }
ptpBMCGMClockAccuracy OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm clock accuracy."
::= { ptpGlobalInfo 13 }
ptpBMCGMClockClass OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm clock class."
::= { ptpGlobalInfo 14 }
ptpBMCGMTimeSource OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm time source."
::= { ptpGlobalInfo 15 }
ptpBMCGMUtcOffset OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm utc offset."
::= { ptpGlobalInfo 16 }
ptpBMCGMUTCOffsetValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm utc offset valid."
::= { ptpGlobalInfo 17 }
ptpBMCGMTimeScale OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm time scale."
::= { ptpGlobalInfo 18 }
ptpBMCGMTimeTraceable OBJECT-TYPE
SYNTAX INTEGER{true(1),false(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm time trace able."
DEFVAL { false }
::= { ptpGlobalInfo 19 }
ptpBMCGMLeap59 OBJECT-TYPE
SYNTAX INTEGER{true(1),false(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm leap59."
DEFVAL { false }
::= { ptpGlobalInfo 20 }
ptpBMCGMLeap61 OBJECT-TYPE
SYNTAX INTEGER{true(1),false(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm leap61."
DEFVAL { false }
::= { ptpGlobalInfo 21 }
ptpBMCGMFrequencyTraceable OBJECT-TYPE
SYNTAX INTEGER{true(1),false(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp bmc gm frequency traceable."
DEFVAL { false }
::= { ptpGlobalInfo 22 }
ptpClearStatistics OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear all statistics for the ptp. 0 mean clear all ptp interface statistics."
::= { ptpGlobalInfo 23 }
ptpDeviceType OBJECT-TYPE
SYNTAX INTEGER
{
oc(0),
bc (1),
e2etc(2),
p2ptc(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the clock. oc(0), bc(1), e2etc(2), p2ptc(3). "
DEFVAL { bc }
::= { ptpGlobalInfo 24 }
ptpGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Precision Time Protocol (IEEE1588). enable(1), disable(2). "
DEFVAL { disable }
::= { ptpGlobalInfo 25 }
ptpDomain OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain attribute of the local clock. Range 0~255. "
DEFVAL { 0 }
::= { ptpGlobalInfo 26 }
ptpTcPrimaryDomain OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary syntonization domain. Range 0~255. "
DEFVAL { 0 }
::= { ptpGlobalInfo 27 }
ptpSlaveOnly OBJECT-TYPE
SYNTAX INTEGER
{
disable(2),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Slave-only clock can never enter the MASTER state. Disable(2), Enable(1). "
DEFVAL { disable }
::= { ptpGlobalInfo 28 }
ptpPriority1 OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority1 attribute of the local clock. Range 0~255. "
DEFVAL { 128 }
::= { ptpGlobalInfo 29 }
ptpPriority2 OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority2 attribute of the local clock. Range 0~255. "
DEFVAL { 128 }
::= { ptpGlobalInfo 30 }
ptpClockAccuracy OBJECT-TYPE
SYNTAX Integer32 (1..19)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The clock accuracy characterizes a clock for the purpose of the best master clock(BMC) algorithm.
Value:
1: The time is accurate to within 25 ns.
2: The time is accurate to within 100 ns.
3: The time is accurate to within 250 ns
4: The time is accurate to within 1 us.
5: The time is accurate to within 2.5 us.
6: The time is accurate to within 10 us.
7: The time is accurate to within 25 us.
8: The time is accurate to within 100 us.
9: The time is accurate to within 250 us.
10: The time is accurate to within 1 ms.
11: The time is accurate to within 2.5 ms.
12: The time is accurate to within 10 ms.
13: The time is accurate to within 25 ms.
14: The time is accurate to within 100 ms.
15: The time is accurate to within 250 ms.
16: The time is accurate to within 1 s.
17: The time is accurate to within 10 s.
18: The time is accurate to > 10 s.
19: The time is accurate to unknown.
"
-- DEFVAL { 0xFE }
::= { ptpGlobalInfo 31 }
ptpClockClass OBJECT-TYPE
SYNTAX INTEGER
{
class6(6),
class7(7),
class13(13),
class14(14),
class52(52),
class58(58),
class187(187),
class193(193),
class248(248)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The clockClass attribute of an ordinary or boundary clock denotes the traceability of the time or frequency distributed by the grandmaster clock. Value only is 6,7,13,14,52,58,187,193,248."
-- DEFVAL { 0xFE }
::= { ptpGlobalInfo 32 }
ptpLeap59 OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The last minute of the current UTC day contains 59 seconds. Disable(2), Enable(1). "
DEFVAL { disable }
::= { ptpGlobalInfo 33 }
ptpLeap61 OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The last minute of the current UTC day contains 61 seconds. Disable(2), Enable(1). "
DEFVAL { disable }
::= { ptpGlobalInfo 34 }
ptpTimeSource OBJECT-TYPE
SYNTAX INTEGER
{
atomic-clock(1),
gps(2),
internal-oscillator(3),
ptp(4),
ntp(5),
hand-set(6),
other(7),
terrestrial-radio(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The attribute indicates the source of time used by the local clock.
atomic-clock(1),
gps(2),
internal-oscillator(3),
ptp(4),
ntp(5),
hand-set(6),
other(7),
terrestrial-radio(8)."
DEFVAL { internal-oscillator }
::= { ptpGlobalInfo 35 }
ptpClockTodOutput OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable clock tod output. enable(1), disable(2). "
DEFVAL { disable }
::= { ptpGlobalInfo 36 }
ptpClockSyncInterfaceOutput OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable clock sync interface output. enable(1), disable(2). "
DEFVAL { disable }
::= { ptpGlobalInfo 37 }
ptpTodPulseDelayCorrection OBJECT-TYPE
SYNTAX Integer32 (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ptp tod pulse delay correction. Range 1~1000000. "
DEFVAL { 1 }
::= { ptpGlobalInfo 38 }
-- ## 1.2 show ptp interface
ptpIfConfigureTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpIfConfigureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Monitor link group."
::= { ptp 2 }
ptpIfConfigureEntry OBJECT-TYPE
SYNTAX PtpIfConfigureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of Monitor link group."
INDEX { ptpIfIndex}
::= { ptpIfConfigureTable 1 }
PtpIfConfigureEntry ::=
SEQUENCE
{
ptpIfIndex
Integer32,
ptpAnnounceInterval
Integer32,
ptpSyncInterval
Integer32,
ptpMinDelayreqInterval
Integer32,
ptpMinPdelayreqInterval
Integer32,
ptpAnnounceReceiptTimeout
Integer32,
ptpDelayMechanism
INTEGER,
ptpEnable
INTEGER,
ptpAsymmetryCorrection
Integer32,
ptpProtocolMac
INTEGER,
ptpUdpSrcIp
OCTET STRING,
ptpVlanId
Integer32,
ptpCos
Integer32,
ptpIfName
OCTET STRING,
ptpIfState
INTEGER,
ptpIfStep
Integer32,
ptpIfPortId
OCTET STRING,
ptpIfRcvAnn
Integer32,
ptpIfRcvDelayReq
Integer32,
ptpIfRcvDelayResp
Integer32,
ptpIfRcvFollowUp
Integer32,
ptpIfRcvUnknown
Integer32,
ptpIfRcvSync
Integer32,
ptpIfRcvPDelayReq
Integer32,
ptpIfRcvPDelayResp
Integer32,
ptpIfRcvPDelayRespFowllowUp
Integer32,
ptpIfSendAnn
Integer32,
ptpIfSendDelayReq
Integer32,
ptpIfSendDelayResp
Integer32,
ptpIfSendFollowUp
Integer32,
ptpIfSendUnknown
Integer32,
ptpIfSendSync
Integer32,
ptpIfSendPDelayReq
Integer32,
ptpIfSendPDelayResp
Integer32,
ptpIfSendPDelayRespFowllowUp
Integer32,
ptpIfDiscardAnn
Integer32,
ptpIfDiscardDelayReq
Integer32,
ptpIfDiscardDelayResp
Integer32,
ptpIfDiscardFollowUp
Integer32,
ptpIfDiscardUnknown
Integer32,
ptpIfDiscardSync
Integer32,
ptpIfDiscardPDelayReq
Integer32,
ptpIfDiscardPDelayResp
Integer32,
ptpIfDiscardPDelayRespFowllowUp
Integer32,
ptpIfIngressLatency
Integer32,
ptpIfEgressLatency
Integer32
}
ptpIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of ptp interface."
::= { ptpIfConfigureEntry 1 }
ptpAnnounceInterval OBJECT-TYPE
SYNTAX Integer32 (-1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mean announce interval. Range -1~10. "
DEFVAL { 1 }
::= { ptpIfConfigureEntry 2 }
ptpSyncInterval OBJECT-TYPE
SYNTAX Integer32 (-1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mean sync interval for multicast messages. Range -1~10. "
DEFVAL { 1 }
::= { ptpIfConfigureEntry 3 }
ptpMinDelayreqInterval OBJECT-TYPE
SYNTAX Integer32 (-1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum delay request interval for multicast messages. Range -1~10. "
DEFVAL { 0 }
::= { ptpIfConfigureEntry 4 }
ptpMinPdelayreqInterval OBJECT-TYPE
SYNTAX Integer32 (-1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum peer delay request interval for multicast messages. Range -1~10. "
DEFVAL { 0 }
::= { ptpIfConfigureEntry 5 }
ptpAnnounceReceiptTimeout OBJECT-TYPE
SYNTAX Integer32 (3..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of announce interval that has to pass without receipt of an Announce message before the occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES. Range 3~255. "
DEFVAL { 4 }
::= { ptpIfConfigureEntry 6 }
ptpDelayMechanism OBJECT-TYPE
SYNTAX INTEGER
{
normal (1),
peer (2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The propagation delay measuring option used by the port in computing meanPathDelay. normal(1).peer(2).disable(3)."
DEFVAL { normal }
::= { ptpIfConfigureEntry 7 }
ptpEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(2),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Precision Time Protocol (IEEE1588). Disable(2), Enable(1). "
DEFVAL { disable }
::= { ptpIfConfigureEntry 8 }
ptpAsymmetryCorrection OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The asymmetry correction of the path. Range -2000000 - 2000000. "
DEFVAL { 0 }
::= { ptpIfConfigureEntry 9 }
ptpProtocolMac OBJECT-TYPE
SYNTAX INTEGER
{
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transport PTP messages directly over Ethernet frames as specified in IEEE Std 802.3-2005.Note: IF set value (1), ptpUdpSrcIp(11) will invalid. "
::= { ptpIfConfigureEntry 10 }
ptpUdpSrcIp OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transport PTP messages over the User Datagram Protocol (UDP) as defined in IETF RFC 768 (1980), and Internet Protocol version 4 (IPv4), as defined in IETF RFC 791 (1981). Note: IF set value, ptpProtocolMac(10) will invalid. "
::= { ptpIfConfigureEntry 11 }
ptpVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Vlan ID. Range 1~4094. -1 mean delete."
::= { ptpIfConfigureEntry 12 }
ptpCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Class of Services. Range 0~7. -1 mean delete."
::= { ptpIfConfigureEntry 13 }
ptpIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ptp interface name. "
::= { ptpIfConfigureEntry 14 }
ptpIfState OBJECT-TYPE
SYNTAX INTEGER
{
normal(0),
initializing(1),
faulty(2),
disabled(3),
listening(4),
premaster(5),
master(6),
passive(7),
uncalibrated(8),
slave(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface state."
::= { ptpIfConfigureEntry 15 }
ptpIfStep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface step."
::= { ptpIfConfigureEntry 16 }
ptpIfPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface id."
::= { ptpIfConfigureEntry 17 }
ptpIfRcvAnn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive announce packet."
::= { ptpIfConfigureEntry 18 }
ptpIfRcvDelayReq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive delay packet."
::= { ptpIfConfigureEntry 19 }
ptpIfRcvDelayResp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive delay response packet."
::= { ptpIfConfigureEntry 20 }
ptpIfRcvFollowUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive follow up packet."
::= { ptpIfConfigureEntry 21 }
ptpIfRcvUnknown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive unknown packet."
::= { ptpIfConfigureEntry 22 }
ptpIfRcvSync OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive sync packet."
::= { ptpIfConfigureEntry 23 }
ptpIfRcvPDelayReq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive peer delay packet."
::= { ptpIfConfigureEntry 24 }
ptpIfRcvPDelayResp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive delay response packet."
::= { ptpIfConfigureEntry 25 }
ptpIfRcvPDelayRespFowllowUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface receive delay response follow up packet."
::= { ptpIfConfigureEntry 26 }
ptpIfSendAnn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send announce packet."
::= { ptpIfConfigureEntry 27 }
ptpIfSendDelayReq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send delay request packet."
::= { ptpIfConfigureEntry 28 }
ptpIfSendDelayResp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send delay response packet."
::= { ptpIfConfigureEntry 29 }
ptpIfSendFollowUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send follow up packet."
::= { ptpIfConfigureEntry 30 }
ptpIfSendUnknown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send unknown packet."
::= { ptpIfConfigureEntry 31 }
ptpIfSendSync OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send sync packet."
::= { ptpIfConfigureEntry 32 }
ptpIfSendPDelayReq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send peer delay request packet."
::= { ptpIfConfigureEntry 33 }
ptpIfSendPDelayResp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send peer delay response packet."
::= { ptpIfConfigureEntry 34 }
ptpIfSendPDelayRespFowllowUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface send peer delay response follow up packet."
::= { ptpIfConfigureEntry 35 }
ptpIfDiscardAnn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard announce packet."
::= { ptpIfConfigureEntry 36 }
ptpIfDiscardDelayReq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard delay request packet."
::= { ptpIfConfigureEntry 37 }
ptpIfDiscardDelayResp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard delay response packet."
::= { ptpIfConfigureEntry 38 }
ptpIfDiscardFollowUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard follow up packet."
::= { ptpIfConfigureEntry 39 }
ptpIfDiscardUnknown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard unknown packet."
::= { ptpIfConfigureEntry 40 }
ptpIfDiscardSync OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard sync packet."
::= { ptpIfConfigureEntry 41 }
ptpIfDiscardPDelayReq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard delay request packet."
::= { ptpIfConfigureEntry 42 }
ptpIfDiscardPDelayResp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard peer delay response packet."
::= { ptpIfConfigureEntry 43 }
ptpIfDiscardPDelayRespFowllowUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ptp interface discard peer delay response follow up packet."
::= { ptpIfConfigureEntry 44 }
ptpIfIngressLatency OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ptn ingress latency. Range 0~65535. "
DEFVAL { 0 }
::= { ptpIfConfigureEntry 45 }
ptpIfEgressLatency OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ptp egress latency. Range 0~65535. "
DEFVAL { 0 }
::= { ptpIfConfigureEntry 46 }
-- ## 1.3 show ptp foreign-master
ptpForeignMasterTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpForeignMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Monitor link group."
::= { ptp 3 }
ptpForeignMasterEntry OBJECT-TYPE
SYNTAX PtpForeignMasterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of Monitor link group."
INDEX { ptpFMIndex, ptpFMNodeIndex}
::= { ptpForeignMasterTable 1 }
PtpForeignMasterEntry ::=
SEQUENCE
{
ptpFMIndex
Integer32,
ptpFMNodeIndex
Integer32,
ptpFMBest
TruthValue,
ptpFMClockID
OCTET STRING,
ptpFMPortNum
Integer32,
ptpFMQualification
Integer32,
ptpFMIfName
OCTET STRING
}
ptpFMIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ptp foreign master interface index. "
::= { ptpForeignMasterEntry 1 }
ptpFMNodeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ptp foreign master node index. "
::= { ptpForeignMasterEntry 2 }
ptpFMBest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of foreign master: true(1): best.false(2): not best."
::= { ptpForeignMasterEntry 3 }
ptpFMClockID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ptp foreign master clock id. "
::= { ptpForeignMasterEntry 4 }
ptpFMPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ptp foreign master port num. "
::= { ptpForeignMasterEntry 5 }
ptpFMQualification OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ptp foreign master qualification. "
::= { ptpForeignMasterEntry 6 }
ptpFMIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ptp foreign master interface name. "
::= { ptpForeignMasterEntry 7 }
ptpNotifications OBJECT IDENTIFIER ::= { ptp 100 }
ptpMasterChange NOTIFICATION-TYPE
OBJECTS { ptpFMClockID }
STATUS current
DESCRIPTION
"This trap will be generated when timing
reference changes."
::= {ptpNotifications 1}
ptpIfStateChange NOTIFICATION-TYPE
OBJECTS { ptpIfState }
STATUS current
DESCRIPTION
"This trap will be generated when ptp state
of an interface changes."
::= {ptpNotifications 2}
ptpMasterClockAccuracyChange NOTIFICATION-TYPE
OBJECTS { ptpClockAccuracy }
STATUS current
DESCRIPTION
"This trap will be generated when clock accuracy
of the master changes."
::= {ptpNotifications 3}
--pm OBJECT IDENTIFIER ::= { OID 90 }
pmThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains all pm threshold information."
::= { pm 1 }
pmThresholdEntry OBJECT-TYPE
SYNTAX PMThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all pm threshold information."
INDEX { pmThresholdIndex }
::= { pmThresholdTable 1 }
PMThresholdEntry ::=
SEQUENCE
{
pmThresholdIndex INTEGER,
pmThreshold15mValue OCTET STRING,
pmThreshold1hValue OCTET STRING,
pmThreshold1dValue OCTET STRING
}
pmThresholdIndex OBJECT-TYPE
SYNTAX INTEGER
{
unit-temperature-min(1),
unit-temperature-max(2),
sfp-rx-power-min(3),
sfp-rx-power-max(4),
sfp-tx-power-min(5),
sfp-tx-power-max(6),
if-dropped-events(7),
if-input-packets(8),
if-input-bytes(9),
if-input-broadcasts(10),
if-input-multicasts(11),
if-crc-errors(12),
if-collisions(13),
if-undersized-packets(14),
if-oversized-packets(15),
if-fragments(16),
if-jabbers(17),
if-packet-64(18),
if-packet-65-127(19),
if-packet-128-255(20),
if-packet-256-511(21),
if-packet-512-1023(22),
if-packet-1024(23),
if-output-packets(24),
if-output-bytes(25),
lsp-pe-out-packets(26),
lsp-pe-out-bytes(27),
lsp-p-east-ingress-packets(28),
lsp-p-east-ingress-bytes(29),
lsp-p-west-ingress-packets(30),
lsp-p-west-ingress-bytes(31),
vpws-ingress-packets(32),
vpws-ingress-bytes(33),
vpws-egress-packets(34),
vpws-egress-bytes(35),
vpls-ingress-packets(36),
vpls-ingress-bytes(37),
vpls-egress-packets(38),
vpls-egress-bytes(39)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of pm types."
::= { pmThresholdEntry 1 }
pmThreshold15mValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for 15min period."
::= { pmThresholdEntry 2 }
pmThreshold1hValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for 1hour period."
::= { pmThresholdEntry 3 }
pmThreshold1dValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for 1day period."
::= { pmThresholdEntry 4 }
pmUnitTempr OBJECT IDENTIFIER ::= { pm 100 }
pmUnitTemprCurr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMUnitTemprCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 1 }
pmUnitTemprCurr15mEntry OBJECT-TYPE
SYNTAX PMUnitTemprCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmUnitTemprCurr15mIndex }
::= { pmUnitTemprCurr15mTable 1 }
PMUnitTemprCurr15mEntry ::=
SEQUENCE
{
pmUnitTemprCurr15mIndex Integer32,
pmUnitTemprCurr15mId OCTET STRING,
pmUnitTemprCurr15mUnitType INTEGER,
pmUnitTemprCurr15mAverage Counter64,
pmUnitTemprCurr15mMin Counter64,
pmUnitTemprCurr15mMax Counter64,
pmUnitTemprCurr15mStartTime DateAndTime,
pmUnitTemprCurr15mStopTime DateAndTime
}
pmUnitTemprCurr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmUnitTemprCurr15mEntry 1 }
pmUnitTemprCurr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit sensor name."
::= { pmUnitTemprCurr15mEntry 2 }
pmUnitTemprCurr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmUnitTemprCurr15mEntry 3 }
pmUnitTemprCurr15mAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of average unit temperature."
::= { pmUnitTemprCurr15mEntry 4 }
pmUnitTemprCurr15mMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of minimum unit temperature."
::= { pmUnitTemprCurr15mEntry 5 }
pmUnitTemprCurr15mMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of maximum unit temperature."
::= { pmUnitTemprCurr15mEntry 6 }
pmUnitTemprCurr15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min start time."
::= { pmUnitTemprCurr15mEntry 100 }
pmUnitTemprCurr15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min stop time."
::= { pmUnitTemprCurr15mEntry 101 }
pmUnitTemprPrev15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMUnitTemprPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 2 }
pmUnitTemprPrev15mEntry OBJECT-TYPE
SYNTAX PMUnitTemprPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmUnitTemprPrev15mIndex }
::= { pmUnitTemprPrev15mTable 1 }
PMUnitTemprPrev15mEntry ::=
SEQUENCE
{
pmUnitTemprPrev15mIndex Integer32,
pmUnitTemprPrev15mId OCTET STRING,
pmUnitTemprPrev15mUnitType INTEGER,
pmUnitTemprPrev15mAverage Counter64,
pmUnitTemprPrev15mMin Counter64,
pmUnitTemprPrev15mMax Counter64,
pmUnitTemprPrev15mStartTime DateAndTime,
pmUnitTemprPrev15mStopTime DateAndTime
}
pmUnitTemprPrev15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmUnitTemprPrev15mEntry 1 }
pmUnitTemprPrev15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmUnitTemprPrev15mEntry 2 }
pmUnitTemprPrev15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmUnitTemprPrev15mEntry 3 }
pmUnitTemprPrev15mAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of average unit temperature."
::= { pmUnitTemprPrev15mEntry 4 }
pmUnitTemprPrev15mMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of minimum unit temperature."
::= { pmUnitTemprPrev15mEntry 5 }
pmUnitTemprPrev15mMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of maximum unit temperature."
::= { pmUnitTemprPrev15mEntry 6 }
pmUnitTemprPrev15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min start time."
::= { pmUnitTemprPrev15mEntry 100 }
pmUnitTemprPrev15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min stop time."
::= { pmUnitTemprPrev15mEntry 101 }
pmUnitTemprCurr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMUnitTemprCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 3 }
pmUnitTemprCurr1hEntry OBJECT-TYPE
SYNTAX PMUnitTemprCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmUnitTemprCurr1hIndex }
::= { pmUnitTemprCurr1hTable 1 }
PMUnitTemprCurr1hEntry ::=
SEQUENCE
{
pmUnitTemprCurr1hIndex Integer32,
pmUnitTemprCurr1hId OCTET STRING,
pmUnitTemprCurr1hUnitType INTEGER,
pmUnitTemprCurr1hAverage Counter64,
pmUnitTemprCurr1hMin Counter64,
pmUnitTemprCurr1hMax Counter64,
pmUnitTemprCurr1hStartTime DateAndTime,
pmUnitTemprCurr1hStopTime DateAndTime
}
pmUnitTemprCurr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmUnitTemprCurr1hEntry 1 }
pmUnitTemprCurr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit sensor name."
::= { pmUnitTemprCurr1hEntry 2 }
pmUnitTemprCurr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmUnitTemprCurr1hEntry 3 }
pmUnitTemprCurr1hAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of average unit temperature."
::= { pmUnitTemprCurr1hEntry 4 }
pmUnitTemprCurr1hMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of minimum unit temperature."
::= { pmUnitTemprCurr1hEntry 5 }
pmUnitTemprCurr1hMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of maximum unit temperature."
::= { pmUnitTemprCurr1hEntry 6 }
pmUnitTemprCurr1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour start time."
::= { pmUnitTemprCurr1hEntry 100 }
pmUnitTemprCurr1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour stop time."
::= { pmUnitTemprCurr1hEntry 101 }
pmUnitTemprPrev1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMUnitTemprPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 4 }
pmUnitTemprPrev1hEntry OBJECT-TYPE
SYNTAX PMUnitTemprPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmUnitTemprPrev1hIndex }
::= { pmUnitTemprPrev1hTable 1 }
PMUnitTemprPrev1hEntry ::=
SEQUENCE
{
pmUnitTemprPrev1hIndex Integer32,
pmUnitTemprPrev1hId OCTET STRING,
pmUnitTemprPrev1hUnitType INTEGER,
pmUnitTemprPrev1hAverage Counter64,
pmUnitTemprPrev1hMin Counter64,
pmUnitTemprPrev1hMax Counter64,
pmUnitTemprPrev1hStartTime DateAndTime,
pmUnitTemprPrev1hStopTime DateAndTime
}
pmUnitTemprPrev1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmUnitTemprPrev1hEntry 1 }
pmUnitTemprPrev1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmUnitTemprPrev1hEntry 2 }
pmUnitTemprPrev1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmUnitTemprPrev1hEntry 3 }
pmUnitTemprPrev1hAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of average unit temperature."
::= { pmUnitTemprPrev1hEntry 4 }
pmUnitTemprPrev1hMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of minimum unit temperature."
::= { pmUnitTemprPrev1hEntry 5 }
pmUnitTemprPrev1hMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of maximum unit temperature."
::= { pmUnitTemprPrev1hEntry 6 }
pmUnitTemprPrev1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour start time."
::= { pmUnitTemprPrev1hEntry 100 }
pmUnitTemprPrev1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour stop time."
::= { pmUnitTemprPrev1hEntry 101 }
pmUnitTemprCurr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMUnitTemprCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 5 }
pmUnitTemprCurr1dEntry OBJECT-TYPE
SYNTAX PMUnitTemprCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmUnitTemprCurr1dIndex }
::= { pmUnitTemprCurr1dTable 1 }
PMUnitTemprCurr1dEntry ::=
SEQUENCE
{
pmUnitTemprCurr1dIndex Integer32,
pmUnitTemprCurr1dId OCTET STRING,
pmUnitTemprCurr1dUnitType INTEGER,
pmUnitTemprCurr1dAverage Counter64,
pmUnitTemprCurr1dMin Counter64,
pmUnitTemprCurr1dMax Counter64,
pmUnitTemprCurr1dStartTime DateAndTime,
pmUnitTemprCurr1dStopTime DateAndTime
}
pmUnitTemprCurr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmUnitTemprCurr1dEntry 1 }
pmUnitTemprCurr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmUnitTemprCurr1dEntry 2 }
pmUnitTemprCurr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmUnitTemprCurr1dEntry 3 }
pmUnitTemprCurr1dAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of average unit temperature."
::= { pmUnitTemprCurr1dEntry 4 }
pmUnitTemprCurr1dMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of minimum unit temperature."
::= { pmUnitTemprCurr1dEntry 5 }
pmUnitTemprCurr1dMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of maximum unit temperature."
::= { pmUnitTemprCurr1dEntry 6 }
pmUnitTemprCurr1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day start time."
::= { pmUnitTemprCurr1dEntry 100 }
pmUnitTemprCurr1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day stop time."
::= { pmUnitTemprCurr1dEntry 101 }
pmUnitTemprPrev1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMUnitTemprPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 6 }
pmUnitTemprPrev1dEntry OBJECT-TYPE
SYNTAX PMUnitTemprPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmUnitTemprPrev1dIndex }
::= { pmUnitTemprPrev1dTable 1 }
PMUnitTemprPrev1dEntry ::=
SEQUENCE
{
pmUnitTemprPrev1dIndex Integer32,
pmUnitTemprPrev1dId OCTET STRING,
pmUnitTemprPrev1dUnitType INTEGER,
pmUnitTemprPrev1dAverage Counter64,
pmUnitTemprPrev1dMin Counter64,
pmUnitTemprPrev1dMax Counter64,
pmUnitTemprPrev1dStartTime DateAndTime,
pmUnitTemprPrev1dStopTime DateAndTime
}
pmUnitTemprPrev1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmUnitTemprPrev1dEntry 1 }
pmUnitTemprPrev1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmUnitTemprPrev1dEntry 2 }
pmUnitTemprPrev1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmUnitTemprPrev1dEntry 3 }
pmUnitTemprPrev1dAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of average unit temperature."
::= { pmUnitTemprPrev1dEntry 4 }
pmUnitTemprPrev1dMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of minimu unit temperature."
::= { pmUnitTemprPrev1dEntry 5 }
pmUnitTemprPrev1dMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of maximum unit temperature."
::= { pmUnitTemprPrev1dEntry 6 }
pmUnitTemprPrev1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day start time."
::= { pmUnitTemprPrev1dEntry 100 }
pmUnitTemprPrev1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day stop time."
::= { pmUnitTemprPrev1dEntry 101 }
pmTcaUnitTemprMin15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaUnitTemprMin15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 7 }
pmTcaUnitTemprMin15mEntry OBJECT-TYPE
SYNTAX PMTcaUnitTemprMin15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaUnitTemprMin15mIndex }
::= { pmTcaUnitTemprMin15mTable 1 }
PMTcaUnitTemprMin15mEntry ::=
SEQUENCE
{
pmTcaUnitTemprMin15mIndex Integer32,
pmTcaUnitTemprMin15mId OCTET STRING,
pmTcaUnitTemprMin15mUnitType INTEGER,
pmTcaUnitTemprMin15mCnt Counter64,
pmTcaUnitTemprMin15mThreshold Counter64,
pmTcaUnitTemprMin15mOccurTime DateAndTime
}
pmTcaUnitTemprMin15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaUnitTemprMin15mEntry 1 }
pmTcaUnitTemprMin15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmTcaUnitTemprMin15mEntry 2 }
pmTcaUnitTemprMin15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaUnitTemprMin15mEntry 3 }
pmTcaUnitTemprMin15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of unit temperature."
::= { pmTcaUnitTemprMin15mEntry 4 }
pmTcaUnitTemprMin15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of unit temperature."
::= { pmTcaUnitTemprMin15mEntry 5 }
pmTcaUnitTemprMin15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaUnitTemprMin15mEntry 6 }
pmTcaUnitTemprMin1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaUnitTemprMin1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 8 }
pmTcaUnitTemprMin1hEntry OBJECT-TYPE
SYNTAX PMTcaUnitTemprMin1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaUnitTemprMin1hIndex }
::= { pmTcaUnitTemprMin1hTable 1 }
PMTcaUnitTemprMin1hEntry ::=
SEQUENCE
{
pmTcaUnitTemprMin1hIndex Integer32,
pmTcaUnitTemprMin1hId OCTET STRING,
pmTcaUnitTemprMin1hUnitType INTEGER,
pmTcaUnitTemprMin1hCnt Counter64,
pmTcaUnitTemprMin1hThreshold Counter64,
pmTcaUnitTemprMin1hOccurTime DateAndTime
}
pmTcaUnitTemprMin1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaUnitTemprMin1hEntry 1 }
pmTcaUnitTemprMin1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmTcaUnitTemprMin1hEntry 2 }
pmTcaUnitTemprMin1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaUnitTemprMin1hEntry 3 }
pmTcaUnitTemprMin1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of unit temperature."
::= { pmTcaUnitTemprMin1hEntry 4 }
pmTcaUnitTemprMin1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of unit temperature."
::= { pmTcaUnitTemprMin1hEntry 5 }
pmTcaUnitTemprMin1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaUnitTemprMin1hEntry 6 }
pmTcaUnitTemprMin1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaUnitTemprMin1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 9 }
pmTcaUnitTemprMin1dEntry OBJECT-TYPE
SYNTAX PMTcaUnitTemprMin1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaUnitTemprMin1dIndex }
::= { pmTcaUnitTemprMin1dTable 1 }
PMTcaUnitTemprMin1dEntry ::=
SEQUENCE
{
pmTcaUnitTemprMin1dIndex Integer32,
pmTcaUnitTemprMin1dId OCTET STRING,
pmTcaUnitTemprMin1dUnitType INTEGER,
pmTcaUnitTemprMin1dCnt Counter64,
pmTcaUnitTemprMin1dThreshold Counter64,
pmTcaUnitTemprMin1dOccurTime DateAndTime
}
pmTcaUnitTemprMin1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaUnitTemprMin1dEntry 1 }
pmTcaUnitTemprMin1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmTcaUnitTemprMin1dEntry 2 }
pmTcaUnitTemprMin1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaUnitTemprMin1dEntry 3 }
pmTcaUnitTemprMin1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of unit temperature."
::= { pmTcaUnitTemprMin1dEntry 4 }
pmTcaUnitTemprMin1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of unit temperature."
::= { pmTcaUnitTemprMin1dEntry 5 }
pmTcaUnitTemprMin1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaUnitTemprMin1dEntry 6 }
pmTcaUnitTemprMax15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaUnitTemprMax15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 10 }
pmTcaUnitTemprMax15mEntry OBJECT-TYPE
SYNTAX PMTcaUnitTemprMax15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaUnitTemprMax15mIndex }
::= { pmTcaUnitTemprMax15mTable 1 }
PMTcaUnitTemprMax15mEntry ::=
SEQUENCE
{
pmTcaUnitTemprMax15mIndex Integer32,
pmTcaUnitTemprMax15mId OCTET STRING,
pmTcaUnitTemprMax15mUnitType INTEGER,
pmTcaUnitTemprMax15mCnt Counter64,
pmTcaUnitTemprMax15mThreshold Counter64,
pmTcaUnitTemprMax15mOccurTime DateAndTime
}
pmTcaUnitTemprMax15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaUnitTemprMax15mEntry 1 }
pmTcaUnitTemprMax15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmTcaUnitTemprMax15mEntry 2 }
pmTcaUnitTemprMax15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaUnitTemprMax15mEntry 3 }
pmTcaUnitTemprMax15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of unit temperature."
::= { pmTcaUnitTemprMax15mEntry 4 }
pmTcaUnitTemprMax15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of unit temperature."
::= { pmTcaUnitTemprMax15mEntry 5 }
pmTcaUnitTemprMax15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaUnitTemprMax15mEntry 6 }
pmTcaUnitTemprMax1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaUnitTemprMax1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 11 }
pmTcaUnitTemprMax1hEntry OBJECT-TYPE
SYNTAX PMTcaUnitTemprMax1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaUnitTemprMax1hIndex }
::= { pmTcaUnitTemprMax1hTable 1 }
PMTcaUnitTemprMax1hEntry ::=
SEQUENCE
{
pmTcaUnitTemprMax1hIndex Integer32,
pmTcaUnitTemprMax1hId OCTET STRING,
pmTcaUnitTemprMax1hUnitType INTEGER,
pmTcaUnitTemprMax1hCnt Counter64,
pmTcaUnitTemprMax1hThreshold Counter64,
pmTcaUnitTemprMax1hOccurTime DateAndTime
}
pmTcaUnitTemprMax1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaUnitTemprMax1hEntry 1 }
pmTcaUnitTemprMax1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sensor name."
::= { pmTcaUnitTemprMax1hEntry 2 }
pmTcaUnitTemprMax1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaUnitTemprMax1hEntry 3 }
pmTcaUnitTemprMax1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of unit temperature."
::= { pmTcaUnitTemprMax1hEntry 4 }
pmTcaUnitTemprMax1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of unit temperature."
::= { pmTcaUnitTemprMax1hEntry 5 }
pmTcaUnitTemprMax1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaUnitTemprMax1hEntry 6 }
pmTcaUnitTemprMax1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaUnitTemprMax1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmUnitTempr 12 }
pmTcaUnitTemprMax1dEntry OBJECT-TYPE
SYNTAX PMTcaUnitTemprMax1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaUnitTemprMax1dIndex }
::= { pmTcaUnitTemprMax1dTable 1 }
PMTcaUnitTemprMax1dEntry ::=
SEQUENCE
{
pmTcaUnitTemprMax1dIndex Integer32,
pmTcaUnitTemprMax1dId OCTET STRING,
pmTcaUnitTemprMax1dUnitType INTEGER,
pmTcaUnitTemprMax1dCnt Counter64,
pmTcaUnitTemprMax1dThreshold Counter64,
pmTcaUnitTemprMax1dOccurTime DateAndTime
}
pmTcaUnitTemprMax1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaUnitTemprMax1dEntry 1 }
pmTcaUnitTemprMax1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaUnitTemprMax1dEntry 2 }
pmTcaUnitTemprMax1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaUnitTemprMax1dEntry 3 }
pmTcaUnitTemprMax1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of unit temperature."
::= { pmTcaUnitTemprMax1dEntry 4 }
pmTcaUnitTemprMax1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of unit temperature."
::= { pmTcaUnitTemprMax1dEntry 5 }
pmTcaUnitTemprMax1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaUnitTemprMax1dEntry 6 }
pmSFPPower OBJECT IDENTIFIER ::= { pm 101 }
pmSFPPowerCurr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMSFPPowerCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 1 }
pmSFPPowerCurr15mEntry OBJECT-TYPE
SYNTAX PMSFPPowerCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmSFPPowerCurr15mIndex }
::= { pmSFPPowerCurr15mTable 1 }
PMSFPPowerCurr15mEntry ::=
SEQUENCE
{
pmSFPPowerCurr15mIndex Integer32,
pmSFPPowerCurr15mId OCTET STRING,
pmSFPPowerCurr15mUnitType INTEGER,
pmSFPPowerCurr15mRxAverage Counter64,
pmSFPPowerCurr15mRxMin Counter64,
pmSFPPowerCurr15mRxMax Counter64,
pmSFPPowerCurr15mTxAverage Counter64,
pmSFPPowerCurr15mTxMin Counter64,
pmSFPPowerCurr15mTxMax Counter64,
pmSFPPowerCurr15mStartTime DateAndTime,
pmSFPPowerCurr15mStopTime DateAndTime
}
pmSFPPowerCurr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmSFPPowerCurr15mEntry 1 }
pmSFPPowerCurr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP name."
::= { pmSFPPowerCurr15mEntry 2 }
pmSFPPowerCurr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmSFPPowerCurr15mEntry 3 }
pmSFPPowerCurr15mRxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of average sfp rx power."
::= { pmSFPPowerCurr15mEntry 4 }
pmSFPPowerCurr15mRxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of minimum sfp rx power."
::= { pmSFPPowerCurr15mEntry 5 }
pmSFPPowerCurr15mRxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of maximum sfp rx power."
::= { pmSFPPowerCurr15mEntry 6 }
pmSFPPowerCurr15mTxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of average sfp tx power."
::= { pmSFPPowerCurr15mEntry 7 }
pmSFPPowerCurr15mTxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of minimum sfp tx power."
::= { pmSFPPowerCurr15mEntry 8 }
pmSFPPowerCurr15mTxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of maximum sfp tx power."
::= { pmSFPPowerCurr15mEntry 9 }
pmSFPPowerCurr15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min start time."
::= { pmSFPPowerCurr15mEntry 100 }
pmSFPPowerCurr15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min stop time."
::= { pmSFPPowerCurr15mEntry 101 }
pmSFPPowerPrev15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMSFPPowerPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 2 }
pmSFPPowerPrev15mEntry OBJECT-TYPE
SYNTAX PMSFPPowerPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmSFPPowerPrev15mIndex }
::= { pmSFPPowerPrev15mTable 1 }
PMSFPPowerPrev15mEntry ::=
SEQUENCE
{
pmSFPPowerPrev15mIndex Integer32,
pmSFPPowerPrev15mId OCTET STRING,
pmSFPPowerPrev15mUnitType INTEGER,
pmSFPPowerPrev15mRxAverage Counter64,
pmSFPPowerPrev15mRxMin Counter64,
pmSFPPowerPrev15mRxMax Counter64,
pmSFPPowerPrev15mTxAverage Counter64,
pmSFPPowerPrev15mTxMin Counter64,
pmSFPPowerPrev15mTxMax Counter64,
pmSFPPowerPrev15mStartTime DateAndTime,
pmSFPPowerPrev15mStopTime DateAndTime
}
pmSFPPowerPrev15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmSFPPowerPrev15mEntry 1 }
pmSFPPowerPrev15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP name."
::= { pmSFPPowerPrev15mEntry 2 }
pmSFPPowerPrev15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmSFPPowerPrev15mEntry 3 }
pmSFPPowerPrev15mRxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of average sfp rx power."
::= { pmSFPPowerPrev15mEntry 4 }
pmSFPPowerPrev15mRxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of minimum sfp rx power."
::= { pmSFPPowerPrev15mEntry 5 }
pmSFPPowerPrev15mRxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of maximum sfp rx power."
::= { pmSFPPowerPrev15mEntry 6 }
pmSFPPowerPrev15mTxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of average sfp tx power."
::= { pmSFPPowerPrev15mEntry 7 }
pmSFPPowerPrev15mTxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of minimum sfp tx power."
::= { pmSFPPowerPrev15mEntry 8 }
pmSFPPowerPrev15mTxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of maximum sfp tx power."
::= { pmSFPPowerPrev15mEntry 9 }
pmSFPPowerPrev15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min start time."
::= { pmSFPPowerPrev15mEntry 100 }
pmSFPPowerPrev15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min stop time."
::= { pmSFPPowerPrev15mEntry 101 }
pmSFPPowerCurr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMSFPPowerCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 3 }
pmSFPPowerCurr1hEntry OBJECT-TYPE
SYNTAX PMSFPPowerCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmSFPPowerCurr1hIndex }
::= { pmSFPPowerCurr1hTable 1 }
PMSFPPowerCurr1hEntry ::=
SEQUENCE
{
pmSFPPowerCurr1hIndex Integer32,
pmSFPPowerCurr1hId OCTET STRING,
pmSFPPowerCurr1hUnitType INTEGER,
pmSFPPowerCurr1hRxAverage Counter64,
pmSFPPowerCurr1hRxMin Counter64,
pmSFPPowerCurr1hRxMax Counter64,
pmSFPPowerCurr1hTxAverage Counter64,
pmSFPPowerCurr1hTxMin Counter64,
pmSFPPowerCurr1hTxMax Counter64,
pmSFPPowerCurr1hStartTime DateAndTime,
pmSFPPowerCurr1hStopTime DateAndTime
}
pmSFPPowerCurr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmSFPPowerCurr1hEntry 1 }
pmSFPPowerCurr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP name."
::= { pmSFPPowerCurr1hEntry 2 }
pmSFPPowerCurr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmSFPPowerCurr1hEntry 3 }
pmSFPPowerCurr1hRxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of average sfp rx power."
::= { pmSFPPowerCurr1hEntry 4 }
pmSFPPowerCurr1hRxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of minimum sfp rx power."
::= { pmSFPPowerCurr1hEntry 5 }
pmSFPPowerCurr1hRxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of maximum sfp rx power."
::= { pmSFPPowerCurr1hEntry 6 }
pmSFPPowerCurr1hTxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of average sfp tx power."
::= { pmSFPPowerCurr1hEntry 7 }
pmSFPPowerCurr1hTxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of minimum sfp tx power."
::= { pmSFPPowerCurr1hEntry 8 }
pmSFPPowerCurr1hTxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of maximum sfp tx power."
::= { pmSFPPowerCurr1hEntry 9 }
pmSFPPowerCurr1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour start time."
::= { pmSFPPowerCurr1hEntry 100 }
pmSFPPowerCurr1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour stop time."
::= { pmSFPPowerCurr1hEntry 101 }
pmSFPPowerPrev1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMSFPPowerPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 4 }
pmSFPPowerPrev1hEntry OBJECT-TYPE
SYNTAX PMSFPPowerPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmSFPPowerPrev1hIndex }
::= { pmSFPPowerPrev1hTable 1 }
PMSFPPowerPrev1hEntry ::=
SEQUENCE
{
pmSFPPowerPrev1hIndex Integer32,
pmSFPPowerPrev1hId OCTET STRING,
pmSFPPowerPrev1hUnitType INTEGER,
pmSFPPowerPrev1hRxAverage Counter64,
pmSFPPowerPrev1hRxMin Counter64,
pmSFPPowerPrev1hRxMax Counter64,
pmSFPPowerPrev1hTxAverage Counter64,
pmSFPPowerPrev1hTxMin Counter64,
pmSFPPowerPrev1hTxMax Counter64,
pmSFPPowerPrev1hStartTime DateAndTime,
pmSFPPowerPrev1hStopTime DateAndTime
}
pmSFPPowerPrev1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmSFPPowerPrev1hEntry 1 }
pmSFPPowerPrev1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP name."
::= { pmSFPPowerPrev1hEntry 2 }
pmSFPPowerPrev1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmSFPPowerPrev1hEntry 3 }
pmSFPPowerPrev1hRxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of average sfp rx power."
::= { pmSFPPowerPrev1hEntry 4 }
pmSFPPowerPrev1hRxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of minimum sfp rx power."
::= { pmSFPPowerPrev1hEntry 5 }
pmSFPPowerPrev1hRxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of maximum sfp rx power."
::= { pmSFPPowerPrev1hEntry 6 }
pmSFPPowerPrev1hTxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of average sfp tx power."
::= { pmSFPPowerPrev1hEntry 7 }
pmSFPPowerPrev1hTxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of minimum sfp tx power."
::= { pmSFPPowerPrev1hEntry 8 }
pmSFPPowerPrev1hTxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of maximum sfp tx power."
::= { pmSFPPowerPrev1hEntry 9 }
pmSFPPowerPrev1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour start time."
::= { pmSFPPowerPrev1hEntry 100 }
pmSFPPowerPrev1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour stop time."
::= { pmSFPPowerPrev1hEntry 101 }
pmSFPPowerCurr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMSFPPowerCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 5 }
pmSFPPowerCurr1dEntry OBJECT-TYPE
SYNTAX PMSFPPowerCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmSFPPowerCurr1dIndex }
::= { pmSFPPowerCurr1dTable 1 }
PMSFPPowerCurr1dEntry ::=
SEQUENCE
{
pmSFPPowerCurr1dIndex Integer32,
pmSFPPowerCurr1dId OCTET STRING,
pmSFPPowerCurr1dUnitType INTEGER,
pmSFPPowerCurr1dRxAverage Counter64,
pmSFPPowerCurr1dRxMin Counter64,
pmSFPPowerCurr1dRxMax Counter64,
pmSFPPowerCurr1dTxAverage Counter64,
pmSFPPowerCurr1dTxMin Counter64,
pmSFPPowerCurr1dTxMax Counter64,
pmSFPPowerCurr1dStartTime DateAndTime,
pmSFPPowerCurr1dStopTime DateAndTime
}
pmSFPPowerCurr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmSFPPowerCurr1dEntry 1 }
pmSFPPowerCurr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP name."
::= { pmSFPPowerCurr1dEntry 2 }
pmSFPPowerCurr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmSFPPowerCurr1dEntry 3 }
pmSFPPowerCurr1dRxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of average sfp rx power."
::= { pmSFPPowerCurr1dEntry 4 }
pmSFPPowerCurr1dRxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of minimum sfp rx power."
::= { pmSFPPowerCurr1dEntry 5 }
pmSFPPowerCurr1dRxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of maximum sfp rx power."
::= { pmSFPPowerCurr1dEntry 6 }
pmSFPPowerCurr1dTxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of average sfp tx power."
::= { pmSFPPowerCurr1dEntry 7 }
pmSFPPowerCurr1dTxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of minimum sfp tx power."
::= { pmSFPPowerCurr1dEntry 8 }
pmSFPPowerCurr1dTxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of maximum sfp tx power."
::= { pmSFPPowerCurr1dEntry 9 }
pmSFPPowerCurr1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day start time."
::= { pmSFPPowerCurr1dEntry 100 }
pmSFPPowerCurr1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day stop time."
::= { pmSFPPowerCurr1dEntry 101 }
pmSFPPowerPrev1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMSFPPowerPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 6 }
pmSFPPowerPrev1dEntry OBJECT-TYPE
SYNTAX PMSFPPowerPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmSFPPowerPrev1dIndex }
::= { pmSFPPowerPrev1dTable 1 }
PMSFPPowerPrev1dEntry ::=
SEQUENCE
{
pmSFPPowerPrev1dIndex Integer32,
pmSFPPowerPrev1dId OCTET STRING,
pmSFPPowerPrev1dUnitType INTEGER,
pmSFPPowerPrev1dRxAverage Counter64,
pmSFPPowerPrev1dRxMin Counter64,
pmSFPPowerPrev1dRxMax Counter64,
pmSFPPowerPrev1dTxAverage Counter64,
pmSFPPowerPrev1dTxMin Counter64,
pmSFPPowerPrev1dTxMax Counter64,
pmSFPPowerPrev1dStartTime DateAndTime,
pmSFPPowerPrev1dStopTime DateAndTime
}
pmSFPPowerPrev1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmSFPPowerPrev1dEntry 1 }
pmSFPPowerPrev1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SFP name."
::= { pmSFPPowerPrev1dEntry 2 }
pmSFPPowerPrev1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmSFPPowerPrev1dEntry 3 }
pmSFPPowerPrev1dRxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of average sfp rx power."
::= { pmSFPPowerPrev1dEntry 4 }
pmSFPPowerPrev1dRxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of minimum sfp rx power."
::= { pmSFPPowerPrev1dEntry 5 }
pmSFPPowerPrev1dRxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of maximum sfp rx power."
::= { pmSFPPowerPrev1dEntry 6 }
pmSFPPowerPrev1dTxAverage OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of average sfp tx power."
::= { pmSFPPowerPrev1dEntry 7 }
pmSFPPowerPrev1dTxMin OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of minimum sfp tx power."
::= { pmSFPPowerPrev1dEntry 8 }
pmSFPPowerPrev1dTxMax OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of maximum sfp tx power."
::= { pmSFPPowerPrev1dEntry 9 }
pmSFPPowerPrev1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day start time."
::= { pmSFPPowerPrev1dEntry 100 }
pmSFPPowerPrev1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day stop time."
::= { pmSFPPowerPrev1dEntry 101 }
pmTcaSFPRxPowerMin15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPRxPowerMin15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 7 }
pmTcaSFPRxPowerMin15mEntry OBJECT-TYPE
SYNTAX PMTcaSFPRxPowerMin15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPRxPowerMin15mIndex }
::= { pmTcaSFPRxPowerMin15mTable 1 }
PMTcaSFPRxPowerMin15mEntry ::=
SEQUENCE
{
pmTcaSFPRxPowerMin15mIndex Integer32,
pmTcaSFPRxPowerMin15mId OCTET STRING,
pmTcaSFPRxPowerMin15mUnitType INTEGER,
pmTcaSFPRxPowerMin15mCnt Counter64,
pmTcaSFPRxPowerMin15mThreshold Counter64,
pmTcaSFPRxPowerMin15mOccurTime DateAndTime
}
pmTcaSFPRxPowerMin15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPRxPowerMin15mEntry 1 }
pmTcaSFPRxPowerMin15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPRxPowerMin15mEntry 2 }
pmTcaSFPRxPowerMin15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPRxPowerMin15mEntry 3 }
pmTcaSFPRxPowerMin15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of unit temperature."
::= { pmTcaSFPRxPowerMin15mEntry 4 }
pmTcaSFPRxPowerMin15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of unit temperature."
::= { pmTcaSFPRxPowerMin15mEntry 5 }
pmTcaSFPRxPowerMin15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPRxPowerMin15mEntry 6 }
pmTcaSFPRxPowerMin1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPRxPowerMin1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 8 }
pmTcaSFPRxPowerMin1hEntry OBJECT-TYPE
SYNTAX PMTcaSFPRxPowerMin1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPRxPowerMin1hIndex }
::= { pmTcaSFPRxPowerMin1hTable 1 }
PMTcaSFPRxPowerMin1hEntry ::=
SEQUENCE
{
pmTcaSFPRxPowerMin1hIndex Integer32,
pmTcaSFPRxPowerMin1hId OCTET STRING,
pmTcaSFPRxPowerMin1hUnitType INTEGER,
pmTcaSFPRxPowerMin1hCnt Counter64,
pmTcaSFPRxPowerMin1hThreshold Counter64,
pmTcaSFPRxPowerMin1hOccurTime DateAndTime
}
pmTcaSFPRxPowerMin1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPRxPowerMin1hEntry 1 }
pmTcaSFPRxPowerMin1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPRxPowerMin1hEntry 2 }
pmTcaSFPRxPowerMin1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPRxPowerMin1hEntry 3 }
pmTcaSFPRxPowerMin1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of unit temperature."
::= { pmTcaSFPRxPowerMin1hEntry 4 }
pmTcaSFPRxPowerMin1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of unit temperature."
::= { pmTcaSFPRxPowerMin1hEntry 5 }
pmTcaSFPRxPowerMin1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPRxPowerMin1hEntry 6 }
pmTcaSFPRxPowerMin1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPRxPowerMin1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 9 }
pmTcaSFPRxPowerMin1dEntry OBJECT-TYPE
SYNTAX PMTcaSFPRxPowerMin1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPRxPowerMin1dIndex }
::= { pmTcaSFPRxPowerMin1dTable 1 }
PMTcaSFPRxPowerMin1dEntry ::=
SEQUENCE
{
pmTcaSFPRxPowerMin1dIndex Integer32,
pmTcaSFPRxPowerMin1dId OCTET STRING,
pmTcaSFPRxPowerMin1dUnitType INTEGER,
pmTcaSFPRxPowerMin1dCnt Counter64,
pmTcaSFPRxPowerMin1dThreshold Counter64,
pmTcaSFPRxPowerMin1dOccurTime DateAndTime
}
pmTcaSFPRxPowerMin1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPRxPowerMin1dEntry 1 }
pmTcaSFPRxPowerMin1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPRxPowerMin1dEntry 2 }
pmTcaSFPRxPowerMin1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPRxPowerMin1dEntry 3 }
pmTcaSFPRxPowerMin1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of unit temperature."
::= { pmTcaSFPRxPowerMin1dEntry 4 }
pmTcaSFPRxPowerMin1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of unit temperature."
::= { pmTcaSFPRxPowerMin1dEntry 5 }
pmTcaSFPRxPowerMin1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPRxPowerMin1dEntry 6 }
pmTcaSFPRxPowerMax15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPRxPowerMax15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 10 }
pmTcaSFPRxPowerMax15mEntry OBJECT-TYPE
SYNTAX PMTcaSFPRxPowerMax15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPRxPowerMax15mIndex }
::= { pmTcaSFPRxPowerMax15mTable 1 }
PMTcaSFPRxPowerMax15mEntry ::=
SEQUENCE
{
pmTcaSFPRxPowerMax15mIndex Integer32,
pmTcaSFPRxPowerMax15mId OCTET STRING,
pmTcaSFPRxPowerMax15mUnitType INTEGER,
pmTcaSFPRxPowerMax15mCnt Counter64,
pmTcaSFPRxPowerMax15mThreshold Counter64,
pmTcaSFPRxPowerMax15mOccurTime DateAndTime
}
pmTcaSFPRxPowerMax15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPRxPowerMax15mEntry 1 }
pmTcaSFPRxPowerMax15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPRxPowerMax15mEntry 2 }
pmTcaSFPRxPowerMax15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPRxPowerMax15mEntry 3 }
pmTcaSFPRxPowerMax15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of unit temperature."
::= { pmTcaSFPRxPowerMax15mEntry 4 }
pmTcaSFPRxPowerMax15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of unit temperature."
::= { pmTcaSFPRxPowerMax15mEntry 5 }
pmTcaSFPRxPowerMax15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPRxPowerMax15mEntry 6 }
pmTcaSFPRxPowerMax1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPRxPowerMax1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 11 }
pmTcaSFPRxPowerMax1hEntry OBJECT-TYPE
SYNTAX PMTcaSFPRxPowerMax1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPRxPowerMax1hIndex }
::= { pmTcaSFPRxPowerMax1hTable 1 }
PMTcaSFPRxPowerMax1hEntry ::=
SEQUENCE
{
pmTcaSFPRxPowerMax1hIndex Integer32,
pmTcaSFPRxPowerMax1hId OCTET STRING,
pmTcaSFPRxPowerMax1hUnitType INTEGER,
pmTcaSFPRxPowerMax1hCnt Counter64,
pmTcaSFPRxPowerMax1hThreshold Counter64,
pmTcaSFPRxPowerMax1hOccurTime DateAndTime
}
pmTcaSFPRxPowerMax1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPRxPowerMax1hEntry 1 }
pmTcaSFPRxPowerMax1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPRxPowerMax1hEntry 2 }
pmTcaSFPRxPowerMax1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPRxPowerMax1hEntry 3 }
pmTcaSFPRxPowerMax1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of unit temperature."
::= { pmTcaSFPRxPowerMax1hEntry 4 }
pmTcaSFPRxPowerMax1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of unit temperature."
::= { pmTcaSFPRxPowerMax1hEntry 5 }
pmTcaSFPRxPowerMax1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPRxPowerMax1hEntry 6 }
pmTcaSFPRxPowerMax1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPRxPowerMax1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 12 }
pmTcaSFPRxPowerMax1dEntry OBJECT-TYPE
SYNTAX PMTcaSFPRxPowerMax1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPRxPowerMax1dIndex }
::= { pmTcaSFPRxPowerMax1dTable 1 }
PMTcaSFPRxPowerMax1dEntry ::=
SEQUENCE
{
pmTcaSFPRxPowerMax1dIndex Integer32,
pmTcaSFPRxPowerMax1dId OCTET STRING,
pmTcaSFPRxPowerMax1dUnitType INTEGER,
pmTcaSFPRxPowerMax1dCnt Counter64,
pmTcaSFPRxPowerMax1dThreshold Counter64,
pmTcaSFPRxPowerMax1dOccurTime DateAndTime
}
pmTcaSFPRxPowerMax1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPRxPowerMax1dEntry 1 }
pmTcaSFPRxPowerMax1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPRxPowerMax1dEntry 2 }
pmTcaSFPRxPowerMax1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPRxPowerMax1dEntry 3 }
pmTcaSFPRxPowerMax1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of unit temperature."
::= { pmTcaSFPRxPowerMax1dEntry 4 }
pmTcaSFPRxPowerMax1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of unit temperature."
::= { pmTcaSFPRxPowerMax1dEntry 5 }
pmTcaSFPRxPowerMax1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPRxPowerMax1dEntry 6 }
pmTcaSFPTxPowerMin15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPTxPowerMin15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 13 }
pmTcaSFPTxPowerMin15mEntry OBJECT-TYPE
SYNTAX PMTcaSFPTxPowerMin15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPTxPowerMin15mIndex }
::= { pmTcaSFPTxPowerMin15mTable 1 }
PMTcaSFPTxPowerMin15mEntry ::=
SEQUENCE
{
pmTcaSFPTxPowerMin15mIndex Integer32,
pmTcaSFPTxPowerMin15mId OCTET STRING,
pmTcaSFPTxPowerMin15mUnitType INTEGER,
pmTcaSFPTxPowerMin15mCnt Counter64,
pmTcaSFPTxPowerMin15mThreshold Counter64,
pmTcaSFPTxPowerMin15mOccurTime DateAndTime
}
pmTcaSFPTxPowerMin15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPTxPowerMin15mEntry 1 }
pmTcaSFPTxPowerMin15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPTxPowerMin15mEntry 2 }
pmTcaSFPTxPowerMin15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPTxPowerMin15mEntry 3 }
pmTcaSFPTxPowerMin15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of unit temperature."
::= { pmTcaSFPTxPowerMin15mEntry 4 }
pmTcaSFPTxPowerMin15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of unit temperature."
::= { pmTcaSFPTxPowerMin15mEntry 5 }
pmTcaSFPTxPowerMin15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPTxPowerMin15mEntry 6 }
pmTcaSFPTxPowerMin1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPTxPowerMin1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 14 }
pmTcaSFPTxPowerMin1hEntry OBJECT-TYPE
SYNTAX PMTcaSFPTxPowerMin1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPTxPowerMin1hIndex }
::= { pmTcaSFPTxPowerMin1hTable 1 }
PMTcaSFPTxPowerMin1hEntry ::=
SEQUENCE
{
pmTcaSFPTxPowerMin1hIndex Integer32,
pmTcaSFPTxPowerMin1hId OCTET STRING,
pmTcaSFPTxPowerMin1hUnitType INTEGER,
pmTcaSFPTxPowerMin1hCnt Counter64,
pmTcaSFPTxPowerMin1hThreshold Counter64,
pmTcaSFPTxPowerMin1hOccurTime DateAndTime
}
pmTcaSFPTxPowerMin1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPTxPowerMin1hEntry 1 }
pmTcaSFPTxPowerMin1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPTxPowerMin1hEntry 2 }
pmTcaSFPTxPowerMin1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPTxPowerMin1hEntry 3 }
pmTcaSFPTxPowerMin1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of unit temperature."
::= { pmTcaSFPTxPowerMin1hEntry 4 }
pmTcaSFPTxPowerMin1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of unit temperature."
::= { pmTcaSFPTxPowerMin1hEntry 5 }
pmTcaSFPTxPowerMin1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPTxPowerMin1hEntry 6 }
pmTcaSFPTxPowerMin1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPTxPowerMin1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 15 }
pmTcaSFPTxPowerMin1dEntry OBJECT-TYPE
SYNTAX PMTcaSFPTxPowerMin1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPTxPowerMin1dIndex }
::= { pmTcaSFPTxPowerMin1dTable 1 }
PMTcaSFPTxPowerMin1dEntry ::=
SEQUENCE
{
pmTcaSFPTxPowerMin1dIndex Integer32,
pmTcaSFPTxPowerMin1dId OCTET STRING,
pmTcaSFPTxPowerMin1dUnitType INTEGER,
pmTcaSFPTxPowerMin1dCnt Counter64,
pmTcaSFPTxPowerMin1dThreshold Counter64,
pmTcaSFPTxPowerMin1dOccurTime DateAndTime
}
pmTcaSFPTxPowerMin1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPTxPowerMin1dEntry 1 }
pmTcaSFPTxPowerMin1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPTxPowerMin1dEntry 2 }
pmTcaSFPTxPowerMin1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPTxPowerMin1dEntry 3 }
pmTcaSFPTxPowerMin1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of unit temperature."
::= { pmTcaSFPTxPowerMin1dEntry 4 }
pmTcaSFPTxPowerMin1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of unit temperature."
::= { pmTcaSFPTxPowerMin1dEntry 5 }
pmTcaSFPTxPowerMin1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPTxPowerMin1dEntry 6 }
pmTcaSFPTxPowerMax15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPTxPowerMax15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 16 }
pmTcaSFPTxPowerMax15mEntry OBJECT-TYPE
SYNTAX PMTcaSFPTxPowerMax15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPTxPowerMax15mIndex }
::= { pmTcaSFPTxPowerMax15mTable 1 }
PMTcaSFPTxPowerMax15mEntry ::=
SEQUENCE
{
pmTcaSFPTxPowerMax15mIndex Integer32,
pmTcaSFPTxPowerMax15mId OCTET STRING,
pmTcaSFPTxPowerMax15mUnitType INTEGER,
pmTcaSFPTxPowerMax15mCnt Counter64,
pmTcaSFPTxPowerMax15mThreshold Counter64,
pmTcaSFPTxPowerMax15mOccurTime DateAndTime
}
pmTcaSFPTxPowerMax15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPTxPowerMax15mEntry 1 }
pmTcaSFPTxPowerMax15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPTxPowerMax15mEntry 2 }
pmTcaSFPTxPowerMax15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPTxPowerMax15mEntry 3 }
pmTcaSFPTxPowerMax15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of unit temperature."
::= { pmTcaSFPTxPowerMax15mEntry 4 }
pmTcaSFPTxPowerMax15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of unit temperature."
::= { pmTcaSFPTxPowerMax15mEntry 5 }
pmTcaSFPTxPowerMax15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPTxPowerMax15mEntry 6 }
pmTcaSFPTxPowerMax1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPTxPowerMax1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 17 }
pmTcaSFPTxPowerMax1hEntry OBJECT-TYPE
SYNTAX PMTcaSFPTxPowerMax1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPTxPowerMax1hIndex }
::= { pmTcaSFPTxPowerMax1hTable 1 }
PMTcaSFPTxPowerMax1hEntry ::=
SEQUENCE
{
pmTcaSFPTxPowerMax1hIndex Integer32,
pmTcaSFPTxPowerMax1hId OCTET STRING,
pmTcaSFPTxPowerMax1hUnitType INTEGER,
pmTcaSFPTxPowerMax1hCnt Counter64,
pmTcaSFPTxPowerMax1hThreshold Counter64,
pmTcaSFPTxPowerMax1hOccurTime DateAndTime
}
pmTcaSFPTxPowerMax1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPTxPowerMax1hEntry 1 }
pmTcaSFPTxPowerMax1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPTxPowerMax1hEntry 2 }
pmTcaSFPTxPowerMax1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPTxPowerMax1hEntry 3 }
pmTcaSFPTxPowerMax1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of unit temperature."
::= { pmTcaSFPTxPowerMax1hEntry 4 }
pmTcaSFPTxPowerMax1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of unit temperature."
::= { pmTcaSFPTxPowerMax1hEntry 5 }
pmTcaSFPTxPowerMax1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPTxPowerMax1hEntry 6 }
pmTcaSFPTxPowerMax1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaSFPTxPowerMax1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmSFPPower 18 }
pmTcaSFPTxPowerMax1dEntry OBJECT-TYPE
SYNTAX PMTcaSFPTxPowerMax1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaSFPTxPowerMax1dIndex }
::= { pmTcaSFPTxPowerMax1dTable 1 }
PMTcaSFPTxPowerMax1dEntry ::=
SEQUENCE
{
pmTcaSFPTxPowerMax1dIndex Integer32,
pmTcaSFPTxPowerMax1dId OCTET STRING,
pmTcaSFPTxPowerMax1dUnitType INTEGER,
pmTcaSFPTxPowerMax1dCnt Counter64,
pmTcaSFPTxPowerMax1dThreshold Counter64,
pmTcaSFPTxPowerMax1dOccurTime DateAndTime
}
pmTcaSFPTxPowerMax1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaSFPTxPowerMax1dEntry 1 }
pmTcaSFPTxPowerMax1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaSFPTxPowerMax1dEntry 2 }
pmTcaSFPTxPowerMax1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaSFPTxPowerMax1dEntry 3 }
pmTcaSFPTxPowerMax1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of unit temperature."
::= { pmTcaSFPTxPowerMax1dEntry 4 }
pmTcaSFPTxPowerMax1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of unit temperature."
::= { pmTcaSFPTxPowerMax1dEntry 5 }
pmTcaSFPTxPowerMax1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaSFPTxPowerMax1dEntry 6 }
pmIfStatistics OBJECT IDENTIFIER ::= { pm 102 }
pmIfStatCurr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMIfStatCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface statistics information of all units."
::= { pmIfStatistics 1 }
pmIfStatCurr15mEntry OBJECT-TYPE
SYNTAX PMIfStatCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface statistics information of all units."
INDEX { pmIfStatCurr15mIndex }
::= { pmIfStatCurr15mTable 1 }
PMIfStatCurr15mEntry ::=
SEQUENCE
{
pmIfStatCurr15mIndex Integer32,
pmIfStatCurr15mId OCTET STRING,
pmIfStatCurr15mUnitType INTEGER,
pmIfStatCurr15mDropped Counter64,
pmIfStatCurr15mInputPkts Counter64,
pmIfStatCurr15mInputbytes Counter64,
pmIfStatCurr15mInputBrdCst Counter64,
pmIfStatCurr15mInputMltCst Counter64,
pmIfStatCurr15mCrcErrors Counter64,
pmIfStatCurr15mCollision Counter64,
pmIfStatCurr15mUndersized Counter64,
pmIfStatCurr15mOversized Counter64,
pmIfStatCurr15mFragments Counter64,
pmIfStatCurr15mJabbers Counter64,
pmIfStatCurr15mPkt64 Counter64,
pmIfStatCurr15mPkt65To127 Counter64,
pmIfStatCurr15mPkt128To255 Counter64,
pmIfStatCurr15mPkt256To511 Counter64,
pmIfStatCurr15mPkt512To1023 Counter64,
pmIfStatCurr15mPkt1024 Counter64,
pmIfStatCurr15mOutputPkts Counter64,
pmIfStatCurr15mOutputBytes Counter64,
pmIfStatCurr15mStartTime DateAndTime,
pmIfStatCurr15mStopTime DateAndTime
}
pmIfStatCurr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmIfStatCurr15mEntry 1 }
pmIfStatCurr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmIfStatCurr15mEntry 2 }
pmIfStatCurr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmIfStatCurr15mEntry 3 }
pmIfStatCurr15mDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of dropped events."
::= { pmIfStatCurr15mEntry 4 }
pmIfStatCurr15mInputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of input packets."
::= { pmIfStatCurr15mEntry 5 }
pmIfStatCurr15mInputbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of input bytes."
::= { pmIfStatCurr15mEntry 6 }
pmIfStatCurr15mCrcErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of packets with CRC error."
::= { pmIfStatCurr15mEntry 7 }
pmIfStatCurr15mInputBrdCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of broadcast packets."
::= { pmIfStatCurr15mEntry 8 }
pmIfStatCurr15mInputMltCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of multicast packets."
::= { pmIfStatCurr15mEntry 9 }
pmIfStatCurr15mCollision OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of collisions."
::= { pmIfStatCurr15mEntry 10 }
pmIfStatCurr15mUndersized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of undersized packets."
::= { pmIfStatCurr15mEntry 11 }
pmIfStatCurr15mOversized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of oversized packets."
::= { pmIfStatCurr15mEntry 12 }
pmIfStatCurr15mFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of frament packets."
::= { pmIfStatCurr15mEntry 13 }
pmIfStatCurr15mJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of jabber packets."
::= { pmIfStatCurr15mEntry 14 }
pmIfStatCurr15mPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of packets with size under 64."
::= { pmIfStatCurr15mEntry 15 }
pmIfStatCurr15mPkt65To127 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of packets with size between 65 to 127."
::= { pmIfStatCurr15mEntry 16 }
pmIfStatCurr15mPkt128To255 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of packets with size between 128 to 255."
::= { pmIfStatCurr15mEntry 17 }
pmIfStatCurr15mPkt256To511 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of packets with size between 256 to 511."
::= { pmIfStatCurr15mEntry 18 }
pmIfStatCurr15mPkt512To1023 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of packets with size between 512 to 1023."
::= { pmIfStatCurr15mEntry 19 }
pmIfStatCurr15mPkt1024 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of packets with size over 1024."
::= { pmIfStatCurr15mEntry 20 }
pmIfStatCurr15mOutputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of interface output packets."
::= { pmIfStatCurr15mEntry 21 }
pmIfStatCurr15mOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of interface output bytes."
::= { pmIfStatCurr15mEntry 22 }
pmIfStatCurr15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min start time."
::= { pmIfStatCurr15mEntry 100 }
pmIfStatCurr15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min stop time."
::= { pmIfStatCurr15mEntry 101 }
pmIfStatPrev15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMIfStatPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface statistics information of all units."
::= { pmIfStatistics 2 }
pmIfStatPrev15mEntry OBJECT-TYPE
SYNTAX PMIfStatPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface statistics information of all units."
INDEX { pmIfStatPrev15mIndex }
::= { pmIfStatPrev15mTable 1 }
PMIfStatPrev15mEntry ::=
SEQUENCE
{
pmIfStatPrev15mIndex Integer32,
pmIfStatPrev15mId OCTET STRING,
pmIfStatPrev15mUnitType INTEGER,
pmIfStatPrev15mDropped Counter64,
pmIfStatPrev15mInputPkts Counter64,
pmIfStatPrev15mInputbytes Counter64,
pmIfStatPrev15mInputBrdCst Counter64,
pmIfStatPrev15mInputMltCst Counter64,
pmIfStatPrev15mCrcErrors Counter64,
pmIfStatPrev15mCollision Counter64,
pmIfStatPrev15mUndersized Counter64,
pmIfStatPrev15mOversized Counter64,
pmIfStatPrev15mFragments Counter64,
pmIfStatPrev15mJabbers Counter64,
pmIfStatPrev15mPkt64 Counter64,
pmIfStatPrev15mPkt65To127 Counter64,
pmIfStatPrev15mPkt128To255 Counter64,
pmIfStatPrev15mPkt256To511 Counter64,
pmIfStatPrev15mPkt512To1023 Counter64,
pmIfStatPrev15mPkt1024 Counter64,
pmIfStatPrev15mOutputPkts Counter64,
pmIfStatPrev15mOutputBytes Counter64,
pmIfStatPrev15mStartTime DateAndTime,
pmIfStatPrev15mStopTime DateAndTime
}
pmIfStatPrev15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmIfStatPrev15mEntry 1 }
pmIfStatPrev15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmIfStatPrev15mEntry 2 }
pmIfStatPrev15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmIfStatPrev15mEntry 3 }
pmIfStatPrev15mDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of dropped events."
::= { pmIfStatPrev15mEntry 4 }
pmIfStatPrev15mInputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of input packets."
::= { pmIfStatPrev15mEntry 5 }
pmIfStatPrev15mInputbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of input bytes."
::= { pmIfStatPrev15mEntry 6 }
pmIfStatPrev15mCrcErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of packets with CRC error."
::= { pmIfStatPrev15mEntry 7 }
pmIfStatPrev15mInputBrdCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of broadcast packets."
::= { pmIfStatPrev15mEntry 8 }
pmIfStatPrev15mInputMltCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of multicast packets."
::= { pmIfStatPrev15mEntry 9 }
pmIfStatPrev15mCollision OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of collisions."
::= { pmIfStatPrev15mEntry 10 }
pmIfStatPrev15mUndersized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of undersized packets."
::= { pmIfStatPrev15mEntry 11 }
pmIfStatPrev15mOversized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of oversized packets."
::= { pmIfStatPrev15mEntry 12 }
pmIfStatPrev15mFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of frament packets."
::= { pmIfStatPrev15mEntry 13 }
pmIfStatPrev15mJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of jabber packets."
::= { pmIfStatPrev15mEntry 14 }
pmIfStatPrev15mPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of packets with size under 64."
::= { pmIfStatPrev15mEntry 15 }
pmIfStatPrev15mPkt65To127 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of packets with size between 65 to 127."
::= { pmIfStatPrev15mEntry 16 }
pmIfStatPrev15mPkt128To255 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of packets with size between 128 to 255."
::= { pmIfStatPrev15mEntry 17 }
pmIfStatPrev15mPkt256To511 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of packets with size between 256 to 511."
::= { pmIfStatPrev15mEntry 18 }
pmIfStatPrev15mPkt512To1023 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of packets with size between 512 to 1023."
::= { pmIfStatPrev15mEntry 19 }
pmIfStatPrev15mPkt1024 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of packets with size over 1024."
::= { pmIfStatPrev15mEntry 20 }
pmIfStatPrev15mOutputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of interface output packets."
::= { pmIfStatPrev15mEntry 21 }
pmIfStatPrev15mOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of interface output bytes."
::= { pmIfStatPrev15mEntry 22 }
pmIfStatPrev15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min start time."
::= { pmIfStatPrev15mEntry 100 }
pmIfStatPrev15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min stop time."
::= { pmIfStatPrev15mEntry 101 }
pmIfStatCurr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMIfStatCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface statistics information of all units."
::= { pmIfStatistics 3 }
pmIfStatCurr1hEntry OBJECT-TYPE
SYNTAX PMIfStatCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface statistics information of all units."
INDEX { pmIfStatCurr1hIndex }
::= { pmIfStatCurr1hTable 1 }
PMIfStatCurr1hEntry ::=
SEQUENCE
{
pmIfStatCurr1hIndex Integer32,
pmIfStatCurr1hId OCTET STRING,
pmIfStatCurr1hUnitType INTEGER,
pmIfStatCurr1hDropped Counter64,
pmIfStatCurr1hInputPkts Counter64,
pmIfStatCurr1hInputbytes Counter64,
pmIfStatCurr1hInputBrdCst Counter64,
pmIfStatCurr1hInputMltCst Counter64,
pmIfStatCurr1hCrcErrors Counter64,
pmIfStatCurr1hCollision Counter64,
pmIfStatCurr1hUndersized Counter64,
pmIfStatCurr1hOversized Counter64,
pmIfStatCurr1hFragments Counter64,
pmIfStatCurr1hJabbers Counter64,
pmIfStatCurr1hPkt64 Counter64,
pmIfStatCurr1hPkt65To127 Counter64,
pmIfStatCurr1hPkt128To255 Counter64,
pmIfStatCurr1hPkt256To511 Counter64,
pmIfStatCurr1hPkt512To1023 Counter64,
pmIfStatCurr1hPkt1024 Counter64,
pmIfStatCurr1hOutputPkts Counter64,
pmIfStatCurr1hOutputBytes Counter64,
pmIfStatCurr1hStartTime DateAndTime,
pmIfStatCurr1hStopTime DateAndTime
}
pmIfStatCurr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmIfStatCurr1hEntry 1 }
pmIfStatCurr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmIfStatCurr1hEntry 2 }
pmIfStatCurr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmIfStatCurr1hEntry 3 }
pmIfStatCurr1hDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of dropped events."
::= { pmIfStatCurr1hEntry 4 }
pmIfStatCurr1hInputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of input packets."
::= { pmIfStatCurr1hEntry 5 }
pmIfStatCurr1hInputbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of input bytes."
::= { pmIfStatCurr1hEntry 6 }
pmIfStatCurr1hCrcErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of packets with CRC error."
::= { pmIfStatCurr1hEntry 7 }
pmIfStatCurr1hInputBrdCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of broadcast packets."
::= { pmIfStatCurr1hEntry 8 }
pmIfStatCurr1hInputMltCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of multicast packets."
::= { pmIfStatCurr1hEntry 9 }
pmIfStatCurr1hCollision OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of collisions."
::= { pmIfStatCurr1hEntry 10 }
pmIfStatCurr1hUndersized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of undersized packets."
::= { pmIfStatCurr1hEntry 11 }
pmIfStatCurr1hOversized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of oversized packets."
::= { pmIfStatCurr1hEntry 12 }
pmIfStatCurr1hFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of frament packets."
::= { pmIfStatCurr1hEntry 13 }
pmIfStatCurr1hJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of jabber packets."
::= { pmIfStatCurr1hEntry 14 }
pmIfStatCurr1hPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of packets with size under 64."
::= { pmIfStatCurr1hEntry 15 }
pmIfStatCurr1hPkt65To127 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of packets with size between 65 to 127."
::= { pmIfStatCurr1hEntry 16 }
pmIfStatCurr1hPkt128To255 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of packets with size between 128 to 255."
::= { pmIfStatCurr1hEntry 17 }
pmIfStatCurr1hPkt256To511 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of packets with size between 256 to 511."
::= { pmIfStatCurr1hEntry 18 }
pmIfStatCurr1hPkt512To1023 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of packets with size between 512 to 1023."
::= { pmIfStatCurr1hEntry 19 }
pmIfStatCurr1hPkt1024 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of packets with size over 1024."
::= { pmIfStatCurr1hEntry 20 }
pmIfStatCurr1hOutputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of interface output packets."
::= { pmIfStatCurr1hEntry 21 }
pmIfStatCurr1hOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of interface output bytes."
::= { pmIfStatCurr1hEntry 22 }
pmIfStatCurr1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour start time."
::= { pmIfStatCurr1hEntry 100 }
pmIfStatCurr1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour stop time."
::= { pmIfStatCurr1hEntry 101 }
pmIfStatPrev1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMIfStatPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface statistics information of all units."
::= { pmIfStatistics 4 }
pmIfStatPrev1hEntry OBJECT-TYPE
SYNTAX PMIfStatPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface statistics information of all units."
INDEX { pmIfStatPrev1hIndex }
::= { pmIfStatPrev1hTable 1 }
PMIfStatPrev1hEntry ::=
SEQUENCE
{
pmIfStatPrev1hIndex Integer32,
pmIfStatPrev1hId OCTET STRING,
pmIfStatPrev1hUnitType INTEGER,
pmIfStatPrev1hDropped Counter64,
pmIfStatPrev1hInputPkts Counter64,
pmIfStatPrev1hInputbytes Counter64,
pmIfStatPrev1hInputBrdCst Counter64,
pmIfStatPrev1hInputMltCst Counter64,
pmIfStatPrev1hCrcErrors Counter64,
pmIfStatPrev1hCollision Counter64,
pmIfStatPrev1hUndersized Counter64,
pmIfStatPrev1hOversized Counter64,
pmIfStatPrev1hFragments Counter64,
pmIfStatPrev1hJabbers Counter64,
pmIfStatPrev1hPkt64 Counter64,
pmIfStatPrev1hPkt65To127 Counter64,
pmIfStatPrev1hPkt128To255 Counter64,
pmIfStatPrev1hPkt256To511 Counter64,
pmIfStatPrev1hPkt512To1023 Counter64,
pmIfStatPrev1hPkt1024 Counter64,
pmIfStatPrev1hOutputPkts Counter64,
pmIfStatPrev1hOutputBytes Counter64,
pmIfStatPrev1hStartTime DateAndTime,
pmIfStatPrev1hStopTime DateAndTime
}
pmIfStatPrev1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmIfStatPrev1hEntry 1 }
pmIfStatPrev1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmIfStatPrev1hEntry 2 }
pmIfStatPrev1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmIfStatPrev1hEntry 3 }
pmIfStatPrev1hDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of dropped events."
::= { pmIfStatPrev1hEntry 4 }
pmIfStatPrev1hInputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of input packets."
::= { pmIfStatPrev1hEntry 5 }
pmIfStatPrev1hInputbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of input bytes."
::= { pmIfStatPrev1hEntry 6 }
pmIfStatPrev1hCrcErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of packets with CRC error."
::= { pmIfStatPrev1hEntry 7 }
pmIfStatPrev1hInputBrdCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of broadcast packets."
::= { pmIfStatPrev1hEntry 8 }
pmIfStatPrev1hInputMltCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of multicast packets."
::= { pmIfStatPrev1hEntry 9 }
pmIfStatPrev1hCollision OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of collisions."
::= { pmIfStatPrev1hEntry 10 }
pmIfStatPrev1hUndersized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of undersized packets."
::= { pmIfStatPrev1hEntry 11 }
pmIfStatPrev1hOversized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of oversized packets."
::= { pmIfStatPrev1hEntry 12 }
pmIfStatPrev1hFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of frament packets."
::= { pmIfStatPrev1hEntry 13 }
pmIfStatPrev1hJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of jabber packets."
::= { pmIfStatPrev1hEntry 14 }
pmIfStatPrev1hPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of packets with size under 64."
::= { pmIfStatPrev1hEntry 15 }
pmIfStatPrev1hPkt65To127 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of packets with size between 65 to 127."
::= { pmIfStatPrev1hEntry 16 }
pmIfStatPrev1hPkt128To255 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of packets with size between 128 to 255."
::= { pmIfStatPrev1hEntry 17 }
pmIfStatPrev1hPkt256To511 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of packets with size between 256 to 511."
::= { pmIfStatPrev1hEntry 18 }
pmIfStatPrev1hPkt512To1023 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of packets with size between 512 to 1023."
::= { pmIfStatPrev1hEntry 19 }
pmIfStatPrev1hPkt1024 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of packets with size over 1024."
::= { pmIfStatPrev1hEntry 20 }
pmIfStatPrev1hOutputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of interface output packets."
::= { pmIfStatPrev1hEntry 21 }
pmIfStatPrev1hOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of interface output bytes."
::= { pmIfStatPrev1hEntry 22 }
pmIfStatPrev1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour start time."
::= { pmIfStatPrev1hEntry 100 }
pmIfStatPrev1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour stop time."
::= { pmIfStatPrev1hEntry 101 }
pmIfStatCurr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMIfStatCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface statistics information of all units."
::= { pmIfStatistics 5 }
pmIfStatCurr1dEntry OBJECT-TYPE
SYNTAX PMIfStatCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface statistics information of all units."
INDEX { pmIfStatCurr1dIndex }
::= { pmIfStatCurr1dTable 1 }
PMIfStatCurr1dEntry ::=
SEQUENCE
{
pmIfStatCurr1dIndex Integer32,
pmIfStatCurr1dId OCTET STRING,
pmIfStatCurr1dUnitType INTEGER,
pmIfStatCurr1dDropped Counter64,
pmIfStatCurr1dInputPkts Counter64,
pmIfStatCurr1dInputbytes Counter64,
pmIfStatCurr1dInputBrdCst Counter64,
pmIfStatCurr1dInputMltCst Counter64,
pmIfStatCurr1dCrcErrors Counter64,
pmIfStatCurr1dCollision Counter64,
pmIfStatCurr1dUndersized Counter64,
pmIfStatCurr1dOversized Counter64,
pmIfStatCurr1dFragments Counter64,
pmIfStatCurr1dJabbers Counter64,
pmIfStatCurr1dPkt64 Counter64,
pmIfStatCurr1dPkt65To127 Counter64,
pmIfStatCurr1dPkt128To255 Counter64,
pmIfStatCurr1dPkt256To511 Counter64,
pmIfStatCurr1dPkt512To1023 Counter64,
pmIfStatCurr1dPkt1024 Counter64,
pmIfStatCurr1dOutputPkts Counter64,
pmIfStatCurr1dOutputBytes Counter64,
pmIfStatCurr1dStartTime DateAndTime,
pmIfStatCurr1dStopTime DateAndTime
}
pmIfStatCurr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmIfStatCurr1dEntry 1 }
pmIfStatCurr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmIfStatCurr1dEntry 2 }
pmIfStatCurr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmIfStatCurr1dEntry 3 }
pmIfStatCurr1dDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of dropped events."
::= { pmIfStatCurr1dEntry 4 }
pmIfStatCurr1dInputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of input packets."
::= { pmIfStatCurr1dEntry 5 }
pmIfStatCurr1dInputbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of input bytes."
::= { pmIfStatCurr1dEntry 6 }
pmIfStatCurr1dCrcErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of packets with CRC error."
::= { pmIfStatCurr1dEntry 7 }
pmIfStatCurr1dInputBrdCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of broadcast packets."
::= { pmIfStatCurr1dEntry 8 }
pmIfStatCurr1dInputMltCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of multicast packets."
::= { pmIfStatCurr1dEntry 9 }
pmIfStatCurr1dCollision OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of collisions."
::= { pmIfStatCurr1dEntry 10 }
pmIfStatCurr1dUndersized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of undersized packets."
::= { pmIfStatCurr1dEntry 11 }
pmIfStatCurr1dOversized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of oversized packets."
::= { pmIfStatCurr1dEntry 12 }
pmIfStatCurr1dFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of frament packets."
::= { pmIfStatCurr1dEntry 13 }
pmIfStatCurr1dJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of jabber packets."
::= { pmIfStatCurr1dEntry 14 }
pmIfStatCurr1dPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of packets with size under 64."
::= { pmIfStatCurr1dEntry 15 }
pmIfStatCurr1dPkt65To127 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of packets with size between 65 to 127."
::= { pmIfStatCurr1dEntry 16 }
pmIfStatCurr1dPkt128To255 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of packets with size between 128 to 255."
::= { pmIfStatCurr1dEntry 17 }
pmIfStatCurr1dPkt256To511 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of packets with size between 256 to 511."
::= { pmIfStatCurr1dEntry 18 }
pmIfStatCurr1dPkt512To1023 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of packets with size between 512 to 1023."
::= { pmIfStatCurr1dEntry 19 }
pmIfStatCurr1dPkt1024 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of packets with size over 1024."
::= { pmIfStatCurr1dEntry 20 }
pmIfStatCurr1dOutputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of interface output packets."
::= { pmIfStatCurr1dEntry 21 }
pmIfStatCurr1dOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of interface output bytes."
::= { pmIfStatCurr1dEntry 22 }
pmIfStatCurr1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day start time."
::= { pmIfStatCurr1dEntry 100 }
pmIfStatCurr1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day stop time."
::= { pmIfStatCurr1dEntry 101 }
pmIfStatPrev1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMIfStatPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface statistics information of all units."
::= { pmIfStatistics 6 }
pmIfStatPrev1dEntry OBJECT-TYPE
SYNTAX PMIfStatPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface statistics information of all units."
INDEX { pmIfStatPrev1dIndex }
::= { pmIfStatPrev1dTable 1 }
PMIfStatPrev1dEntry ::=
SEQUENCE
{
pmIfStatPrev1dIndex Integer32,
pmIfStatPrev1dId OCTET STRING,
pmIfStatPrev1dUnitType INTEGER,
pmIfStatPrev1dDropped Counter64,
pmIfStatPrev1dInputPkts Counter64,
pmIfStatPrev1dInputbytes Counter64,
pmIfStatPrev1dInputBrdCst Counter64,
pmIfStatPrev1dInputMltCst Counter64,
pmIfStatPrev1dCrcErrors Counter64,
pmIfStatPrev1dCollision Counter64,
pmIfStatPrev1dUndersized Counter64,
pmIfStatPrev1dOversized Counter64,
pmIfStatPrev1dFragments Counter64,
pmIfStatPrev1dJabbers Counter64,
pmIfStatPrev1dPkt64 Counter64,
pmIfStatPrev1dPkt65To127 Counter64,
pmIfStatPrev1dPkt128To255 Counter64,
pmIfStatPrev1dPkt256To511 Counter64,
pmIfStatPrev1dPkt512To1023 Counter64,
pmIfStatPrev1dPkt1024 Counter64,
pmIfStatPrev1dOutputPkts Counter64,
pmIfStatPrev1dOutputBytes Counter64,
pmIfStatPrev1dStartTime DateAndTime,
pmIfStatPrev1dStopTime DateAndTime
}
pmIfStatPrev1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmIfStatPrev1dEntry 1 }
pmIfStatPrev1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmIfStatPrev1dEntry 2 }
pmIfStatPrev1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmIfStatPrev1dEntry 3 }
pmIfStatPrev1dDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of dropped events."
::= { pmIfStatPrev1dEntry 4 }
pmIfStatPrev1dInputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of input packets."
::= { pmIfStatPrev1dEntry 5 }
pmIfStatPrev1dInputbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of input bytes."
::= { pmIfStatPrev1dEntry 6 }
pmIfStatPrev1dCrcErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of packets with CRC error."
::= { pmIfStatPrev1dEntry 7 }
pmIfStatPrev1dInputBrdCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of broadcast packets."
::= { pmIfStatPrev1dEntry 8 }
pmIfStatPrev1dInputMltCst OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of multicast packets."
::= { pmIfStatPrev1dEntry 9 }
pmIfStatPrev1dCollision OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of collisions."
::= { pmIfStatPrev1dEntry 10 }
pmIfStatPrev1dUndersized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of undersized packets."
::= { pmIfStatPrev1dEntry 11 }
pmIfStatPrev1dOversized OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of oversized packets."
::= { pmIfStatPrev1dEntry 12 }
pmIfStatPrev1dFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of frament packets."
::= { pmIfStatPrev1dEntry 13 }
pmIfStatPrev1dJabbers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of jabber packets."
::= { pmIfStatPrev1dEntry 14 }
pmIfStatPrev1dPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of packets with size under 64."
::= { pmIfStatPrev1dEntry 15 }
pmIfStatPrev1dPkt65To127 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of packets with size between 65 to 127."
::= { pmIfStatPrev1dEntry 16 }
pmIfStatPrev1dPkt128To255 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of packets with size between 128 to 255."
::= { pmIfStatPrev1dEntry 17 }
pmIfStatPrev1dPkt256To511 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of packets with size between 256 to 511."
::= { pmIfStatPrev1dEntry 18 }
pmIfStatPrev1dPkt512To1023 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of packets with size between 512 to 1023."
::= { pmIfStatPrev1dEntry 19 }
pmIfStatPrev1dPkt1024 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of packets with size over 1024."
::= { pmIfStatPrev1dEntry 20 }
pmIfStatPrev1dOutputPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of interface output packets."
::= { pmIfStatPrev1dEntry 21 }
pmIfStatPrev1dOutputBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of interface output bytes."
::= { pmIfStatPrev1dEntry 22 }
pmIfStatPrev1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day start time."
::= { pmIfStatPrev1dEntry 100 }
pmIfStatPrev1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day stop time."
::= { pmIfStatPrev1dEntry 101 }
pmTcaIfDropped15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfDropped15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 7 }
pmTcaIfDropped15mEntry OBJECT-TYPE
SYNTAX PMTcaIfDropped15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaIfDropped15mIndex }
::= { pmTcaIfDropped15mTable 1 }
PMTcaIfDropped15mEntry ::=
SEQUENCE
{
pmTcaIfDropped15mIndex Integer32,
pmTcaIfDropped15mId OCTET STRING,
pmTcaIfDropped15mUnitType INTEGER,
pmTcaIfDropped15mCnt Counter64,
pmTcaIfDropped15mThreshold Counter64,
pmTcaIfDropped15mOccurTime DateAndTime
}
pmTcaIfDropped15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfDropped15mEntry 1 }
pmTcaIfDropped15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfDropped15mEntry 2 }
pmTcaIfDropped15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfDropped15mEntry 3 }
pmTcaIfDropped15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of interface dropped events."
::= { pmTcaIfDropped15mEntry 4 }
pmTcaIfDropped15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of interface dropped events."
::= { pmTcaIfDropped15mEntry 5 }
pmTcaIfDropped15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfDropped15mEntry 6 }
pmTcaIfDropped1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfDropped1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 8 }
pmTcaIfDropped1hEntry OBJECT-TYPE
SYNTAX PMTcaIfDropped1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaIfDropped1hIndex }
::= { pmTcaIfDropped1hTable 1 }
PMTcaIfDropped1hEntry ::=
SEQUENCE
{
pmTcaIfDropped1hIndex Integer32,
pmTcaIfDropped1hId OCTET STRING,
pmTcaIfDropped1hUnitType INTEGER,
pmTcaIfDropped1hCnt Counter64,
pmTcaIfDropped1hThreshold Counter64,
pmTcaIfDropped1hOccurTime DateAndTime
}
pmTcaIfDropped1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfDropped1hEntry 1 }
pmTcaIfDropped1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfDropped1hEntry 2 }
pmTcaIfDropped1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfDropped1hEntry 3 }
pmTcaIfDropped1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of interface dropped events."
::= { pmTcaIfDropped1hEntry 4 }
pmTcaIfDropped1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of interface dropped events."
::= { pmTcaIfDropped1hEntry 5 }
pmTcaIfDropped1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfDropped1hEntry 6 }
pmTcaIfDropped1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfDropped1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains temperature information of all units."
::= { pmIfStatistics 9 }
pmTcaIfDropped1dEntry OBJECT-TYPE
SYNTAX PMTcaIfDropped1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { pmTcaIfDropped1dIndex }
::= { pmTcaIfDropped1dTable 1 }
PMTcaIfDropped1dEntry ::=
SEQUENCE
{
pmTcaIfDropped1dIndex Integer32,
pmTcaIfDropped1dId OCTET STRING,
pmTcaIfDropped1dUnitType INTEGER,
pmTcaIfDropped1dCnt Counter64,
pmTcaIfDropped1dThreshold Counter64,
pmTcaIfDropped1dOccurTime DateAndTime
}
pmTcaIfDropped1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfDropped1dEntry 1 }
pmTcaIfDropped1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfDropped1dEntry 2 }
pmTcaIfDropped1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfDropped1dEntry 3 }
pmTcaIfDropped1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of interface dropped events."
::= { pmTcaIfDropped1dEntry 4 }
pmTcaIfDropped1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of interface dropped events."
::= { pmTcaIfDropped1dEntry 5 }
pmTcaIfDropped1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfDropped1dEntry 6 }
pmTcaIfInPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 10 }
pmTcaIfInPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaIfInPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInPkts15mIndex }
::= { pmTcaIfInPkts15mTable 1 }
PMTcaIfInPkts15mEntry ::=
SEQUENCE
{
pmTcaIfInPkts15mIndex Integer32,
pmTcaIfInPkts15mId OCTET STRING,
pmTcaIfInPkts15mUnitType INTEGER,
pmTcaIfInPkts15mCnt Counter64,
pmTcaIfInPkts15mThreshold Counter64,
pmTcaIfInPkts15mOccurTime DateAndTime
}
pmTcaIfInPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInPkts15mEntry 1 }
pmTcaIfInPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInPkts15mEntry 2 }
pmTcaIfInPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInPkts15mEntry 3 }
pmTcaIfInPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of input packets."
::= { pmTcaIfInPkts15mEntry 4 }
pmTcaIfInPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of input packets."
::= { pmTcaIfInPkts15mEntry 5 }
pmTcaIfInPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInPkts15mEntry 6 }
pmTcaIfInPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 11 }
pmTcaIfInPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaIfInPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInPkts1hIndex }
::= { pmTcaIfInPkts1hTable 1 }
PMTcaIfInPkts1hEntry ::=
SEQUENCE
{
pmTcaIfInPkts1hIndex Integer32,
pmTcaIfInPkts1hId OCTET STRING,
pmTcaIfInPkts1hUnitType INTEGER,
pmTcaIfInPkts1hCnt Counter64,
pmTcaIfInPkts1hThreshold Counter64,
pmTcaIfInPkts1hOccurTime DateAndTime
}
pmTcaIfInPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInPkts1hEntry 1 }
pmTcaIfInPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInPkts1hEntry 2 }
pmTcaIfInPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInPkts1hEntry 3 }
pmTcaIfInPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of input packets."
::= { pmTcaIfInPkts1hEntry 4 }
pmTcaIfInPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of input packets."
::= { pmTcaIfInPkts1hEntry 5 }
pmTcaIfInPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInPkts1hEntry 6 }
pmTcaIfInPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 12 }
pmTcaIfInPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaIfInPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInPkts1dIndex }
::= { pmTcaIfInPkts1dTable 1 }
PMTcaIfInPkts1dEntry ::=
SEQUENCE
{
pmTcaIfInPkts1dIndex Integer32,
pmTcaIfInPkts1dId OCTET STRING,
pmTcaIfInPkts1dUnitType INTEGER,
pmTcaIfInPkts1dCnt Counter64,
pmTcaIfInPkts1dThreshold Counter64,
pmTcaIfInPkts1dOccurTime DateAndTime
}
pmTcaIfInPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInPkts1dEntry 1 }
pmTcaIfInPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInPkts1dEntry 2 }
pmTcaIfInPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInPkts1dEntry 3 }
pmTcaIfInPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of input packets."
::= { pmTcaIfInPkts1dEntry 4 }
pmTcaIfInPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of input packets."
::= { pmTcaIfInPkts1dEntry 5 }
pmTcaIfInPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInPkts1dEntry 6 }
pmTcaIfInBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 13 }
pmTcaIfInBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaIfInBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInBytes15mIndex }
::= { pmTcaIfInBytes15mTable 1 }
PMTcaIfInBytes15mEntry ::=
SEQUENCE
{
pmTcaIfInBytes15mIndex Integer32,
pmTcaIfInBytes15mId OCTET STRING,
pmTcaIfInBytes15mUnitType INTEGER,
pmTcaIfInBytes15mCnt Counter64,
pmTcaIfInBytes15mThreshold Counter64,
pmTcaIfInBytes15mOccurTime DateAndTime
}
pmTcaIfInBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInBytes15mEntry 1 }
pmTcaIfInBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInBytes15mEntry 2 }
pmTcaIfInBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInBytes15mEntry 3 }
pmTcaIfInBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of input bytes."
::= { pmTcaIfInBytes15mEntry 4 }
pmTcaIfInBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of input bytes."
::= { pmTcaIfInBytes15mEntry 5 }
pmTcaIfInBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInBytes15mEntry 6 }
pmTcaIfInBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 14 }
pmTcaIfInBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaIfInBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInBytes1hIndex }
::= { pmTcaIfInBytes1hTable 1 }
PMTcaIfInBytes1hEntry ::=
SEQUENCE
{
pmTcaIfInBytes1hIndex Integer32,
pmTcaIfInBytes1hId OCTET STRING,
pmTcaIfInBytes1hUnitType INTEGER,
pmTcaIfInBytes1hCnt Counter64,
pmTcaIfInBytes1hThreshold Counter64,
pmTcaIfInBytes1hOccurTime DateAndTime
}
pmTcaIfInBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInBytes1hEntry 1 }
pmTcaIfInBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInBytes1hEntry 2 }
pmTcaIfInBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInBytes1hEntry 3 }
pmTcaIfInBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of input bytes."
::= { pmTcaIfInBytes1hEntry 4 }
pmTcaIfInBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of input bytes."
::= { pmTcaIfInBytes1hEntry 5 }
pmTcaIfInBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInBytes1hEntry 6 }
pmTcaIfInBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 15 }
pmTcaIfInBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaIfInBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInBytes1dIndex }
::= { pmTcaIfInBytes1dTable 1 }
PMTcaIfInBytes1dEntry ::=
SEQUENCE
{
pmTcaIfInBytes1dIndex Integer32,
pmTcaIfInBytes1dId OCTET STRING,
pmTcaIfInBytes1dUnitType INTEGER,
pmTcaIfInBytes1dCnt Counter64,
pmTcaIfInBytes1dThreshold Counter64,
pmTcaIfInBytes1dOccurTime DateAndTime
}
pmTcaIfInBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInBytes1dEntry 1 }
pmTcaIfInBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInBytes1dEntry 2 }
pmTcaIfInBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInBytes1dEntry 3 }
pmTcaIfInBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of input bytes."
::= { pmTcaIfInBytes1dEntry 4 }
pmTcaIfInBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of input bytes."
::= { pmTcaIfInBytes1dEntry 5 }
pmTcaIfInBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInBytes1dEntry 6 }
pmTcaIfInBrdcasts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInBrdcasts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 16 }
pmTcaIfInBrdcasts15mEntry OBJECT-TYPE
SYNTAX PMTcaIfInBrdcasts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInBrdcasts15mIndex }
::= { pmTcaIfInBrdcasts15mTable 1 }
PMTcaIfInBrdcasts15mEntry ::=
SEQUENCE
{
pmTcaIfInBrdcasts15mIndex Integer32,
pmTcaIfInBrdcasts15mId OCTET STRING,
pmTcaIfInBrdcasts15mUnitType INTEGER,
pmTcaIfInBrdcasts15mCnt Counter64,
pmTcaIfInBrdcasts15mThreshold Counter64,
pmTcaIfInBrdcasts15mOccurTime DateAndTime
}
pmTcaIfInBrdcasts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInBrdcasts15mEntry 1 }
pmTcaIfInBrdcasts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInBrdcasts15mEntry 2 }
pmTcaIfInBrdcasts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInBrdcasts15mEntry 3 }
pmTcaIfInBrdcasts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of input broadcast packets."
::= { pmTcaIfInBrdcasts15mEntry 4 }
pmTcaIfInBrdcasts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of input broadcast packets."
::= { pmTcaIfInBrdcasts15mEntry 5 }
pmTcaIfInBrdcasts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInBrdcasts15mEntry 6 }
pmTcaIfInBrdcasts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInBrdcasts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 17 }
pmTcaIfInBrdcasts1hEntry OBJECT-TYPE
SYNTAX PMTcaIfInBrdcasts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInBrdcasts1hIndex }
::= { pmTcaIfInBrdcasts1hTable 1 }
PMTcaIfInBrdcasts1hEntry ::=
SEQUENCE
{
pmTcaIfInBrdcasts1hIndex Integer32,
pmTcaIfInBrdcasts1hId OCTET STRING,
pmTcaIfInBrdcasts1hUnitType INTEGER,
pmTcaIfInBrdcasts1hCnt Counter64,
pmTcaIfInBrdcasts1hThreshold Counter64,
pmTcaIfInBrdcasts1hOccurTime DateAndTime
}
pmTcaIfInBrdcasts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInBrdcasts1hEntry 1 }
pmTcaIfInBrdcasts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInBrdcasts1hEntry 2 }
pmTcaIfInBrdcasts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInBrdcasts1hEntry 3 }
pmTcaIfInBrdcasts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of input broadcast packets."
::= { pmTcaIfInBrdcasts1hEntry 4 }
pmTcaIfInBrdcasts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of input broadcast packets."
::= { pmTcaIfInBrdcasts1hEntry 5 }
pmTcaIfInBrdcasts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInBrdcasts1hEntry 6 }
pmTcaIfInBrdcasts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInBrdcasts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 18 }
pmTcaIfInBrdcasts1dEntry OBJECT-TYPE
SYNTAX PMTcaIfInBrdcasts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInBrdcasts1dIndex }
::= { pmTcaIfInBrdcasts1dTable 1 }
PMTcaIfInBrdcasts1dEntry ::=
SEQUENCE
{
pmTcaIfInBrdcasts1dIndex Integer32,
pmTcaIfInBrdcasts1dId OCTET STRING,
pmTcaIfInBrdcasts1dUnitType INTEGER,
pmTcaIfInBrdcasts1dCnt Counter64,
pmTcaIfInBrdcasts1dThreshold Counter64,
pmTcaIfInBrdcasts1dOccurTime DateAndTime
}
pmTcaIfInBrdcasts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInBrdcasts1dEntry 1 }
pmTcaIfInBrdcasts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInBrdcasts1dEntry 2 }
pmTcaIfInBrdcasts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInBrdcasts1dEntry 3 }
pmTcaIfInBrdcasts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of input broadcast packets."
::= { pmTcaIfInBrdcasts1dEntry 4 }
pmTcaIfInBrdcasts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of input broadcast packets."
::= { pmTcaIfInBrdcasts1dEntry 5 }
pmTcaIfInBrdcasts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInBrdcasts1dEntry 6 }
pmTcaIfInMltcasts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInMltcasts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 19 }
pmTcaIfInMltcasts15mEntry OBJECT-TYPE
SYNTAX PMTcaIfInMltcasts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInMltcasts15mIndex }
::= { pmTcaIfInMltcasts15mTable 1 }
PMTcaIfInMltcasts15mEntry ::=
SEQUENCE
{
pmTcaIfInMltcasts15mIndex Integer32,
pmTcaIfInMltcasts15mId OCTET STRING,
pmTcaIfInMltcasts15mUnitType INTEGER,
pmTcaIfInMltcasts15mCnt Counter64,
pmTcaIfInMltcasts15mThreshold Counter64,
pmTcaIfInMltcasts15mOccurTime DateAndTime
}
pmTcaIfInMltcasts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInMltcasts15mEntry 1 }
pmTcaIfInMltcasts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInMltcasts15mEntry 2 }
pmTcaIfInMltcasts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInMltcasts15mEntry 3 }
pmTcaIfInMltcasts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of input multicast packets."
::= { pmTcaIfInMltcasts15mEntry 4 }
pmTcaIfInMltcasts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of input multicast packets."
::= { pmTcaIfInMltcasts15mEntry 5 }
pmTcaIfInMltcasts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInMltcasts15mEntry 6 }
pmTcaIfInMltcasts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInMltcasts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 20 }
pmTcaIfInMltcasts1hEntry OBJECT-TYPE
SYNTAX PMTcaIfInMltcasts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInMltcasts1hIndex }
::= { pmTcaIfInMltcasts1hTable 1 }
PMTcaIfInMltcasts1hEntry ::=
SEQUENCE
{
pmTcaIfInMltcasts1hIndex Integer32,
pmTcaIfInMltcasts1hId OCTET STRING,
pmTcaIfInMltcasts1hUnitType INTEGER,
pmTcaIfInMltcasts1hCnt Counter64,
pmTcaIfInMltcasts1hThreshold Counter64,
pmTcaIfInMltcasts1hOccurTime DateAndTime
}
pmTcaIfInMltcasts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInMltcasts1hEntry 1 }
pmTcaIfInMltcasts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInMltcasts1hEntry 2 }
pmTcaIfInMltcasts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInMltcasts1hEntry 3 }
pmTcaIfInMltcasts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of input multicast packets."
::= { pmTcaIfInMltcasts1hEntry 4 }
pmTcaIfInMltcasts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of input multicast packets."
::= { pmTcaIfInMltcasts1hEntry 5 }
pmTcaIfInMltcasts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInMltcasts1hEntry 6 }
pmTcaIfInMltcasts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfInMltcasts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 21 }
pmTcaIfInMltcasts1dEntry OBJECT-TYPE
SYNTAX PMTcaIfInMltcasts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfInMltcasts1dIndex }
::= { pmTcaIfInMltcasts1dTable 1 }
PMTcaIfInMltcasts1dEntry ::=
SEQUENCE
{
pmTcaIfInMltcasts1dIndex Integer32,
pmTcaIfInMltcasts1dId OCTET STRING,
pmTcaIfInMltcasts1dUnitType INTEGER,
pmTcaIfInMltcasts1dCnt Counter64,
pmTcaIfInMltcasts1dThreshold Counter64,
pmTcaIfInMltcasts1dOccurTime DateAndTime
}
pmTcaIfInMltcasts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfInMltcasts1dEntry 1 }
pmTcaIfInMltcasts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfInMltcasts1dEntry 2 }
pmTcaIfInMltcasts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfInMltcasts1dEntry 3 }
pmTcaIfInMltcasts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of input multicast packets."
::= { pmTcaIfInMltcasts1dEntry 4 }
pmTcaIfInMltcasts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of input multicast packets."
::= { pmTcaIfInMltcasts1dEntry 5 }
pmTcaIfInMltcasts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfInMltcasts1dEntry 6 }
pmTcaIfCrcErr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfCrcErr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 22 }
pmTcaIfCrcErr15mEntry OBJECT-TYPE
SYNTAX PMTcaIfCrcErr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfCrcErr15mIndex }
::= { pmTcaIfCrcErr15mTable 1 }
PMTcaIfCrcErr15mEntry ::=
SEQUENCE
{
pmTcaIfCrcErr15mIndex Integer32,
pmTcaIfCrcErr15mId OCTET STRING,
pmTcaIfCrcErr15mUnitType INTEGER,
pmTcaIfCrcErr15mCnt Counter64,
pmTcaIfCrcErr15mThreshold Counter64,
pmTcaIfCrcErr15mOccurTime DateAndTime
}
pmTcaIfCrcErr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfCrcErr15mEntry 1 }
pmTcaIfCrcErr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfCrcErr15mEntry 2 }
pmTcaIfCrcErr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfCrcErr15mEntry 3 }
pmTcaIfCrcErr15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of packets with CRC error."
::= { pmTcaIfCrcErr15mEntry 4 }
pmTcaIfCrcErr15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of packets with CRC error."
::= { pmTcaIfCrcErr15mEntry 5 }
pmTcaIfCrcErr15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfCrcErr15mEntry 6 }
pmTcaIfCrcErr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfCrcErr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 23 }
pmTcaIfCrcErr1hEntry OBJECT-TYPE
SYNTAX PMTcaIfCrcErr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfCrcErr1hIndex }
::= { pmTcaIfCrcErr1hTable 1 }
PMTcaIfCrcErr1hEntry ::=
SEQUENCE
{
pmTcaIfCrcErr1hIndex Integer32,
pmTcaIfCrcErr1hId OCTET STRING,
pmTcaIfCrcErr1hUnitType INTEGER,
pmTcaIfCrcErr1hCnt Counter64,
pmTcaIfCrcErr1hThreshold Counter64,
pmTcaIfCrcErr1hOccurTime DateAndTime
}
pmTcaIfCrcErr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfCrcErr1hEntry 1 }
pmTcaIfCrcErr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfCrcErr1hEntry 2 }
pmTcaIfCrcErr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfCrcErr1hEntry 3 }
pmTcaIfCrcErr1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of packets with CRC error."
::= { pmTcaIfCrcErr1hEntry 4 }
pmTcaIfCrcErr1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of packets with CRC error."
::= { pmTcaIfCrcErr1hEntry 5 }
pmTcaIfCrcErr1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfCrcErr1hEntry 6 }
pmTcaIfCrcErr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfCrcErr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 24 }
pmTcaIfCrcErr1dEntry OBJECT-TYPE
SYNTAX PMTcaIfCrcErr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfCrcErr1dIndex }
::= { pmTcaIfCrcErr1dTable 1 }
PMTcaIfCrcErr1dEntry ::=
SEQUENCE
{
pmTcaIfCrcErr1dIndex Integer32,
pmTcaIfCrcErr1dId OCTET STRING,
pmTcaIfCrcErr1dUnitType INTEGER,
pmTcaIfCrcErr1dCnt Counter64,
pmTcaIfCrcErr1dThreshold Counter64,
pmTcaIfCrcErr1dOccurTime DateAndTime
}
pmTcaIfCrcErr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfCrcErr1dEntry 1 }
pmTcaIfCrcErr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfCrcErr1dEntry 2 }
pmTcaIfCrcErr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfCrcErr1dEntry 3 }
pmTcaIfCrcErr1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of packets with CRC error."
::= { pmTcaIfCrcErr1dEntry 4 }
pmTcaIfCrcErr1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of packets with CRC error."
::= { pmTcaIfCrcErr1dEntry 5 }
pmTcaIfCrcErr1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfCrcErr1dEntry 6 }
pmTcaIfCollisions15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfCollisions15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 25 }
pmTcaIfCollisions15mEntry OBJECT-TYPE
SYNTAX PMTcaIfCollisions15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature interface of all units."
INDEX { pmTcaIfCollisions15mIndex }
::= { pmTcaIfCollisions15mTable 1 }
PMTcaIfCollisions15mEntry ::=
SEQUENCE
{
pmTcaIfCollisions15mIndex Integer32,
pmTcaIfCollisions15mId OCTET STRING,
pmTcaIfCollisions15mUnitType INTEGER,
pmTcaIfCollisions15mCnt Counter64,
pmTcaIfCollisions15mThreshold Counter64,
pmTcaIfCollisions15mOccurTime DateAndTime
}
pmTcaIfCollisions15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfCollisions15mEntry 1 }
pmTcaIfCollisions15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfCollisions15mEntry 2 }
pmTcaIfCollisions15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfCollisions15mEntry 3 }
pmTcaIfCollisions15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of collisions."
::= { pmTcaIfCollisions15mEntry 4 }
pmTcaIfCollisions15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of collisions."
::= { pmTcaIfCollisions15mEntry 5 }
pmTcaIfCollisions15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfCollisions15mEntry 6 }
pmTcaIfCollisions1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfCollisions1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 26 }
pmTcaIfCollisions1hEntry OBJECT-TYPE
SYNTAX PMTcaIfCollisions1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature interface of all units."
INDEX { pmTcaIfCollisions1hIndex }
::= { pmTcaIfCollisions1hTable 1 }
PMTcaIfCollisions1hEntry ::=
SEQUENCE
{
pmTcaIfCollisions1hIndex Integer32,
pmTcaIfCollisions1hId OCTET STRING,
pmTcaIfCollisions1hUnitType INTEGER,
pmTcaIfCollisions1hCnt Counter64,
pmTcaIfCollisions1hThreshold Counter64,
pmTcaIfCollisions1hOccurTime DateAndTime
}
pmTcaIfCollisions1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfCollisions1hEntry 1 }
pmTcaIfCollisions1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfCollisions1hEntry 2 }
pmTcaIfCollisions1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfCollisions1hEntry 3 }
pmTcaIfCollisions1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of collisions."
::= { pmTcaIfCollisions1hEntry 4 }
pmTcaIfCollisions1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of collisions."
::= { pmTcaIfCollisions1hEntry 5 }
pmTcaIfCollisions1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfCollisions1hEntry 6 }
pmTcaIfCollisions1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfCollisions1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 27 }
pmTcaIfCollisions1dEntry OBJECT-TYPE
SYNTAX PMTcaIfCollisions1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfCollisions1dIndex }
::= { pmTcaIfCollisions1dTable 1 }
PMTcaIfCollisions1dEntry ::=
SEQUENCE
{
pmTcaIfCollisions1dIndex Integer32,
pmTcaIfCollisions1dId OCTET STRING,
pmTcaIfCollisions1dUnitType INTEGER,
pmTcaIfCollisions1dCnt Counter64,
pmTcaIfCollisions1dThreshold Counter64,
pmTcaIfCollisions1dOccurTime DateAndTime
}
pmTcaIfCollisions1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfCollisions1dEntry 1 }
pmTcaIfCollisions1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfCollisions1dEntry 2 }
pmTcaIfCollisions1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfCollisions1dEntry 3 }
pmTcaIfCollisions1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of collisions."
::= { pmTcaIfCollisions1dEntry 4 }
pmTcaIfCollisions1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of collisions."
::= { pmTcaIfCollisions1dEntry 5 }
pmTcaIfCollisions1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfCollisions1dEntry 6 }
pmTcaIfUndersized15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfUndersized15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 28 }
pmTcaIfUndersized15mEntry OBJECT-TYPE
SYNTAX PMTcaIfUndersized15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature interface of all units."
INDEX { pmTcaIfUndersized15mIndex }
::= { pmTcaIfUndersized15mTable 1 }
PMTcaIfUndersized15mEntry ::=
SEQUENCE
{
pmTcaIfUndersized15mIndex Integer32,
pmTcaIfUndersized15mId OCTET STRING,
pmTcaIfUndersized15mUnitType INTEGER,
pmTcaIfUndersized15mCnt Counter64,
pmTcaIfUndersized15mThreshold Counter64,
pmTcaIfUndersized15mOccurTime DateAndTime
}
pmTcaIfUndersized15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfUndersized15mEntry 1 }
pmTcaIfUndersized15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfUndersized15mEntry 2 }
pmTcaIfUndersized15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfUndersized15mEntry 3 }
pmTcaIfUndersized15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of undersized packets."
::= { pmTcaIfUndersized15mEntry 4 }
pmTcaIfUndersized15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of undersized packets."
::= { pmTcaIfUndersized15mEntry 5 }
pmTcaIfUndersized15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfUndersized15mEntry 6 }
pmTcaIfUndersized1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfUndersized1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 29 }
pmTcaIfUndersized1hEntry OBJECT-TYPE
SYNTAX PMTcaIfUndersized1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature interface of all units."
INDEX { pmTcaIfUndersized1hIndex }
::= { pmTcaIfUndersized1hTable 1 }
PMTcaIfUndersized1hEntry ::=
SEQUENCE
{
pmTcaIfUndersized1hIndex Integer32,
pmTcaIfUndersized1hId OCTET STRING,
pmTcaIfUndersized1hUnitType INTEGER,
pmTcaIfUndersized1hCnt Counter64,
pmTcaIfUndersized1hThreshold Counter64,
pmTcaIfUndersized1hOccurTime DateAndTime
}
pmTcaIfUndersized1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfUndersized1hEntry 1 }
pmTcaIfUndersized1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfUndersized1hEntry 2 }
pmTcaIfUndersized1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfUndersized1hEntry 3 }
pmTcaIfUndersized1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of undersized packets."
::= { pmTcaIfUndersized1hEntry 4 }
pmTcaIfUndersized1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of undersized packets."
::= { pmTcaIfUndersized1hEntry 5 }
pmTcaIfUndersized1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfUndersized1hEntry 6 }
pmTcaIfUndersized1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfUndersized1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 30 }
pmTcaIfUndersized1dEntry OBJECT-TYPE
SYNTAX PMTcaIfUndersized1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature interface of all units."
INDEX { pmTcaIfUndersized1dIndex }
::= { pmTcaIfUndersized1dTable 1 }
PMTcaIfUndersized1dEntry ::=
SEQUENCE
{
pmTcaIfUndersized1dIndex Integer32,
pmTcaIfUndersized1dId OCTET STRING,
pmTcaIfUndersized1dUnitType INTEGER,
pmTcaIfUndersized1dCnt Counter64,
pmTcaIfUndersized1dThreshold Counter64,
pmTcaIfUndersized1dOccurTime DateAndTime
}
pmTcaIfUndersized1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfUndersized1dEntry 1 }
pmTcaIfUndersized1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfUndersized1dEntry 2 }
pmTcaIfUndersized1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfUndersized1dEntry 3 }
pmTcaIfUndersized1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of undersized packets."
::= { pmTcaIfUndersized1dEntry 4 }
pmTcaIfUndersized1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of undersized packets."
::= { pmTcaIfUndersized1dEntry 5 }
pmTcaIfUndersized1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfUndersized1dEntry 6 }
pmTcaIfOversized15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOversized15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 31 }
pmTcaIfOversized15mEntry OBJECT-TYPE
SYNTAX PMTcaIfOversized15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature interface of all units."
INDEX { pmTcaIfOversized15mIndex }
::= { pmTcaIfOversized15mTable 1 }
PMTcaIfOversized15mEntry ::=
SEQUENCE
{
pmTcaIfOversized15mIndex Integer32,
pmTcaIfOversized15mId OCTET STRING,
pmTcaIfOversized15mUnitType INTEGER,
pmTcaIfOversized15mCnt Counter64,
pmTcaIfOversized15mThreshold Counter64,
pmTcaIfOversized15mOccurTime DateAndTime
}
pmTcaIfOversized15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOversized15mEntry 1 }
pmTcaIfOversized15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOversized15mEntry 2 }
pmTcaIfOversized15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOversized15mEntry 3 }
pmTcaIfOversized15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of oversized packets."
::= { pmTcaIfOversized15mEntry 4 }
pmTcaIfOversized15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of oversized packets."
::= { pmTcaIfOversized15mEntry 5 }
pmTcaIfOversized15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOversized15mEntry 6 }
pmTcaIfOversized1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOversized1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 32 }
pmTcaIfOversized1hEntry OBJECT-TYPE
SYNTAX PMTcaIfOversized1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature interface of all units."
INDEX { pmTcaIfOversized1hIndex }
::= { pmTcaIfOversized1hTable 1 }
PMTcaIfOversized1hEntry ::=
SEQUENCE
{
pmTcaIfOversized1hIndex Integer32,
pmTcaIfOversized1hId OCTET STRING,
pmTcaIfOversized1hUnitType INTEGER,
pmTcaIfOversized1hCnt Counter64,
pmTcaIfOversized1hThreshold Counter64,
pmTcaIfOversized1hOccurTime DateAndTime
}
pmTcaIfOversized1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOversized1hEntry 1 }
pmTcaIfOversized1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOversized1hEntry 2 }
pmTcaIfOversized1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOversized1hEntry 3 }
pmTcaIfOversized1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of oversized packets."
::= { pmTcaIfOversized1hEntry 4 }
pmTcaIfOversized1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of oversized packets."
::= { pmTcaIfOversized1hEntry 5 }
pmTcaIfOversized1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOversized1hEntry 6 }
pmTcaIfOversized1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOversized1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 33 }
pmTcaIfOversized1dEntry OBJECT-TYPE
SYNTAX PMTcaIfOversized1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfOversized1dIndex }
::= { pmTcaIfOversized1dTable 1 }
PMTcaIfOversized1dEntry ::=
SEQUENCE
{
pmTcaIfOversized1dIndex Integer32,
pmTcaIfOversized1dId OCTET STRING,
pmTcaIfOversized1dUnitType INTEGER,
pmTcaIfOversized1dCnt Counter64,
pmTcaIfOversized1dThreshold Counter64,
pmTcaIfOversized1dOccurTime DateAndTime
}
pmTcaIfOversized1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOversized1dEntry 1 }
pmTcaIfOversized1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOversized1dEntry 2 }
pmTcaIfOversized1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOversized1dEntry 3 }
pmTcaIfOversized1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of oversized packets."
::= { pmTcaIfOversized1dEntry 4 }
pmTcaIfOversized1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of oversized packets."
::= { pmTcaIfOversized1dEntry 5 }
pmTcaIfOversized1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOversized1dEntry 6 }
pmTcaIfFragments15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfFragments15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 34 }
pmTcaIfFragments15mEntry OBJECT-TYPE
SYNTAX PMTcaIfFragments15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfFragments15mIndex }
::= { pmTcaIfFragments15mTable 1 }
PMTcaIfFragments15mEntry ::=
SEQUENCE
{
pmTcaIfFragments15mIndex Integer32,
pmTcaIfFragments15mId OCTET STRING,
pmTcaIfFragments15mUnitType INTEGER,
pmTcaIfFragments15mCnt Counter64,
pmTcaIfFragments15mThreshold Counter64,
pmTcaIfFragments15mOccurTime DateAndTime
}
pmTcaIfFragments15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfFragments15mEntry 1 }
pmTcaIfFragments15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfFragments15mEntry 2 }
pmTcaIfFragments15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfFragments15mEntry 3 }
pmTcaIfFragments15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of fragment packets."
::= { pmTcaIfFragments15mEntry 4 }
pmTcaIfFragments15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of fragment packets."
::= { pmTcaIfFragments15mEntry 5 }
pmTcaIfFragments15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfFragments15mEntry 6 }
pmTcaIfFragments1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfFragments1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 35 }
pmTcaIfFragments1hEntry OBJECT-TYPE
SYNTAX PMTcaIfFragments1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfFragments1hIndex }
::= { pmTcaIfFragments1hTable 1 }
PMTcaIfFragments1hEntry ::=
SEQUENCE
{
pmTcaIfFragments1hIndex Integer32,
pmTcaIfFragments1hId OCTET STRING,
pmTcaIfFragments1hUnitType INTEGER,
pmTcaIfFragments1hCnt Counter64,
pmTcaIfFragments1hThreshold Counter64,
pmTcaIfFragments1hOccurTime DateAndTime
}
pmTcaIfFragments1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfFragments1hEntry 1 }
pmTcaIfFragments1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfFragments1hEntry 2 }
pmTcaIfFragments1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfFragments1hEntry 3 }
pmTcaIfFragments1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of fragment packets."
::= { pmTcaIfFragments1hEntry 4 }
pmTcaIfFragments1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of fragment packets."
::= { pmTcaIfFragments1hEntry 5 }
pmTcaIfFragments1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfFragments1hEntry 6 }
pmTcaIfFragments1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfFragments1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 36 }
pmTcaIfFragments1dEntry OBJECT-TYPE
SYNTAX PMTcaIfFragments1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfFragments1dIndex }
::= { pmTcaIfFragments1dTable 1 }
PMTcaIfFragments1dEntry ::=
SEQUENCE
{
pmTcaIfFragments1dIndex Integer32,
pmTcaIfFragments1dId OCTET STRING,
pmTcaIfFragments1dUnitType INTEGER,
pmTcaIfFragments1dCnt Counter64,
pmTcaIfFragments1dThreshold Counter64,
pmTcaIfFragments1dOccurTime DateAndTime
}
pmTcaIfFragments1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfFragments1dEntry 1 }
pmTcaIfFragments1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfFragments1dEntry 2 }
pmTcaIfFragments1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfFragments1dEntry 3 }
pmTcaIfFragments1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of fragment packets."
::= { pmTcaIfFragments1dEntry 4 }
pmTcaIfFragments1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of fragment packets."
::= { pmTcaIfFragments1dEntry 5 }
pmTcaIfFragments1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfFragments1dEntry 6 }
pmTcaIfJabbers15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfJabbers15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 37 }
pmTcaIfJabbers15mEntry OBJECT-TYPE
SYNTAX PMTcaIfJabbers15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfJabbers15mIndex }
::= { pmTcaIfJabbers15mTable 1 }
PMTcaIfJabbers15mEntry ::=
SEQUENCE
{
pmTcaIfJabbers15mIndex Integer32,
pmTcaIfJabbers15mId OCTET STRING,
pmTcaIfJabbers15mUnitType INTEGER,
pmTcaIfJabbers15mCnt Counter64,
pmTcaIfJabbers15mThreshold Counter64,
pmTcaIfJabbers15mOccurTime DateAndTime
}
pmTcaIfJabbers15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfJabbers15mEntry 1 }
pmTcaIfJabbers15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfJabbers15mEntry 2 }
pmTcaIfJabbers15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfJabbers15mEntry 3 }
pmTcaIfJabbers15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of jabber packets."
::= { pmTcaIfJabbers15mEntry 4 }
pmTcaIfJabbers15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of jabber packets."
::= { pmTcaIfJabbers15mEntry 5 }
pmTcaIfJabbers15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfJabbers15mEntry 6 }
pmTcaIfJabbers1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfJabbers1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 38 }
pmTcaIfJabbers1hEntry OBJECT-TYPE
SYNTAX PMTcaIfJabbers1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfJabbers1hIndex }
::= { pmTcaIfJabbers1hTable 1 }
PMTcaIfJabbers1hEntry ::=
SEQUENCE
{
pmTcaIfJabbers1hIndex Integer32,
pmTcaIfJabbers1hId OCTET STRING,
pmTcaIfJabbers1hUnitType INTEGER,
pmTcaIfJabbers1hCnt Counter64,
pmTcaIfJabbers1hThreshold Counter64,
pmTcaIfJabbers1hOccurTime DateAndTime
}
pmTcaIfJabbers1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfJabbers1hEntry 1 }
pmTcaIfJabbers1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfJabbers1hEntry 2 }
pmTcaIfJabbers1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfJabbers1hEntry 3 }
pmTcaIfJabbers1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of jabber packets."
::= { pmTcaIfJabbers1hEntry 4 }
pmTcaIfJabbers1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of jabber packets."
::= { pmTcaIfJabbers1hEntry 5 }
pmTcaIfJabbers1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfJabbers1hEntry 6 }
pmTcaIfJabbers1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfJabbers1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 39 }
pmTcaIfJabbers1dEntry OBJECT-TYPE
SYNTAX PMTcaIfJabbers1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfJabbers1dIndex }
::= { pmTcaIfJabbers1dTable 1 }
PMTcaIfJabbers1dEntry ::=
SEQUENCE
{
pmTcaIfJabbers1dIndex Integer32,
pmTcaIfJabbers1dId OCTET STRING,
pmTcaIfJabbers1dUnitType INTEGER,
pmTcaIfJabbers1dCnt Counter64,
pmTcaIfJabbers1dThreshold Counter64,
pmTcaIfJabbers1dOccurTime DateAndTime
}
pmTcaIfJabbers1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfJabbers1dEntry 1 }
pmTcaIfJabbers1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfJabbers1dEntry 2 }
pmTcaIfJabbers1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfJabbers1dEntry 3 }
pmTcaIfJabbers1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of jabber packets."
::= { pmTcaIfJabbers1dEntry 4 }
pmTcaIfJabbers1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of jabber packets."
::= { pmTcaIfJabbers1dEntry 5 }
pmTcaIfJabbers1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfJabbers1dEntry 6 }
pmTcaIfPkt6415mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt6415mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 40 }
pmTcaIfPkt6415mEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt6415mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt6415mIndex }
::= { pmTcaIfPkt6415mTable 1 }
PMTcaIfPkt6415mEntry ::=
SEQUENCE
{
pmTcaIfPkt6415mIndex Integer32,
pmTcaIfPkt6415mId OCTET STRING,
pmTcaIfPkt6415mUnitType INTEGER,
pmTcaIfPkt6415mCnt Counter64,
pmTcaIfPkt6415mThreshold Counter64,
pmTcaIfPkt6415mOccurTime DateAndTime
}
pmTcaIfPkt6415mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt6415mEntry 1 }
pmTcaIfPkt6415mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt6415mEntry 2 }
pmTcaIfPkt6415mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt6415mEntry 3 }
pmTcaIfPkt6415mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of packets with size under 64."
::= { pmTcaIfPkt6415mEntry 4 }
pmTcaIfPkt6415mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of packets with size under 64."
::= { pmTcaIfPkt6415mEntry 5 }
pmTcaIfPkt6415mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt6415mEntry 6 }
pmTcaIfPkt641hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt641hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 41 }
pmTcaIfPkt641hEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt641hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt641hIndex }
::= { pmTcaIfPkt641hTable 1 }
PMTcaIfPkt641hEntry ::=
SEQUENCE
{
pmTcaIfPkt641hIndex Integer32,
pmTcaIfPkt641hId OCTET STRING,
pmTcaIfPkt641hUnitType INTEGER,
pmTcaIfPkt641hCnt Counter64,
pmTcaIfPkt641hThreshold Counter64,
pmTcaIfPkt641hOccurTime DateAndTime
}
pmTcaIfPkt641hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt641hEntry 1 }
pmTcaIfPkt641hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt641hEntry 2 }
pmTcaIfPkt641hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt641hEntry 3 }
pmTcaIfPkt641hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of packets with size under 64."
::= { pmTcaIfPkt641hEntry 4 }
pmTcaIfPkt641hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of packets with size under 64."
::= { pmTcaIfPkt641hEntry 5 }
pmTcaIfPkt641hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt641hEntry 6 }
pmTcaIfPkt641dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt641dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 42 }
pmTcaIfPkt641dEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt641dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt641dIndex }
::= { pmTcaIfPkt641dTable 1 }
PMTcaIfPkt641dEntry ::=
SEQUENCE
{
pmTcaIfPkt641dIndex Integer32,
pmTcaIfPkt641dId OCTET STRING,
pmTcaIfPkt641dUnitType INTEGER,
pmTcaIfPkt641dCnt Counter64,
pmTcaIfPkt641dThreshold Counter64,
pmTcaIfPkt641dOccurTime DateAndTime
}
pmTcaIfPkt641dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt641dEntry 1 }
pmTcaIfPkt641dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt641dEntry 2 }
pmTcaIfPkt641dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt641dEntry 3 }
pmTcaIfPkt641dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of packets with size under 64."
::= { pmTcaIfPkt641dEntry 4 }
pmTcaIfPkt641dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of packets with size under 64."
::= { pmTcaIfPkt641dEntry 5 }
pmTcaIfPkt641dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt641dEntry 6 }
pmTcaIfPkt65to12715mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt65to12715mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 43 }
pmTcaIfPkt65to12715mEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt65to12715mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt65to12715mIndex }
::= { pmTcaIfPkt65to12715mTable 1 }
PMTcaIfPkt65to12715mEntry ::=
SEQUENCE
{
pmTcaIfPkt65to12715mIndex Integer32,
pmTcaIfPkt65to12715mId OCTET STRING,
pmTcaIfPkt65to12715mUnitType INTEGER,
pmTcaIfPkt65to12715mCnt Counter64,
pmTcaIfPkt65to12715mThreshold Counter64,
pmTcaIfPkt65to12715mOccurTime DateAndTime
}
pmTcaIfPkt65to12715mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt65to12715mEntry 1 }
pmTcaIfPkt65to12715mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt65to12715mEntry 2 }
pmTcaIfPkt65to12715mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt65to12715mEntry 3 }
pmTcaIfPkt65to12715mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of packets with size between 65 to 127."
::= { pmTcaIfPkt65to12715mEntry 4 }
pmTcaIfPkt65to12715mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of packets with size between 65 to 127."
::= { pmTcaIfPkt65to12715mEntry 5 }
pmTcaIfPkt65to12715mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt65to12715mEntry 6 }
pmTcaIfPkt65to1271hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt65to1271hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 44 }
pmTcaIfPkt65to1271hEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt65to1271hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt65to1271hIndex }
::= { pmTcaIfPkt65to1271hTable 1 }
PMTcaIfPkt65to1271hEntry ::=
SEQUENCE
{
pmTcaIfPkt65to1271hIndex Integer32,
pmTcaIfPkt65to1271hId OCTET STRING,
pmTcaIfPkt65to1271hUnitType INTEGER,
pmTcaIfPkt65to1271hCnt Counter64,
pmTcaIfPkt65to1271hThreshold Counter64,
pmTcaIfPkt65to1271hOccurTime DateAndTime
}
pmTcaIfPkt65to1271hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt65to1271hEntry 1 }
pmTcaIfPkt65to1271hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt65to1271hEntry 2 }
pmTcaIfPkt65to1271hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt65to1271hEntry 3 }
pmTcaIfPkt65to1271hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of packets with size between 65 to 127."
::= { pmTcaIfPkt65to1271hEntry 4 }
pmTcaIfPkt65to1271hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of packets with size between 65 to 127."
::= { pmTcaIfPkt65to1271hEntry 5 }
pmTcaIfPkt65to1271hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt65to1271hEntry 6 }
pmTcaIfPkt65to1271dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt65to1271dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 45 }
pmTcaIfPkt65to1271dEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt65to1271dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt65to1271dIndex }
::= { pmTcaIfPkt65to1271dTable 1 }
PMTcaIfPkt65to1271dEntry ::=
SEQUENCE
{
pmTcaIfPkt65to1271dIndex Integer32,
pmTcaIfPkt65to1271dId OCTET STRING,
pmTcaIfPkt65to1271dUnitType INTEGER,
pmTcaIfPkt65to1271dCnt Counter64,
pmTcaIfPkt65to1271dThreshold Counter64,
pmTcaIfPkt65to1271dOccurTime DateAndTime
}
pmTcaIfPkt65to1271dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt65to1271dEntry 1 }
pmTcaIfPkt65to1271dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt65to1271dEntry 2 }
pmTcaIfPkt65to1271dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt65to1271dEntry 3 }
pmTcaIfPkt65to1271dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of packets with size between 65 to 127."
::= { pmTcaIfPkt65to1271dEntry 4 }
pmTcaIfPkt65to1271dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of packets with size between 65 to 127."
::= { pmTcaIfPkt65to1271dEntry 5 }
pmTcaIfPkt65to1271dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt65to1271dEntry 6 }
pmTcaIfPkt128to25515mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt128to25515mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 46 }
pmTcaIfPkt128to25515mEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt128to25515mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt128to25515mIndex }
::= { pmTcaIfPkt128to25515mTable 1 }
PMTcaIfPkt128to25515mEntry ::=
SEQUENCE
{
pmTcaIfPkt128to25515mIndex Integer32,
pmTcaIfPkt128to25515mId OCTET STRING,
pmTcaIfPkt128to25515mUnitType INTEGER,
pmTcaIfPkt128to25515mCnt Counter64,
pmTcaIfPkt128to25515mThreshold Counter64,
pmTcaIfPkt128to25515mOccurTime DateAndTime
}
pmTcaIfPkt128to25515mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt128to25515mEntry 1 }
pmTcaIfPkt128to25515mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt128to25515mEntry 2 }
pmTcaIfPkt128to25515mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt128to25515mEntry 3 }
pmTcaIfPkt128to25515mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of packets with size between 128 to 255."
::= { pmTcaIfPkt128to25515mEntry 4 }
pmTcaIfPkt128to25515mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of packets with size between 128 to 255."
::= { pmTcaIfPkt128to25515mEntry 5 }
pmTcaIfPkt128to25515mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt128to25515mEntry 6 }
pmTcaIfPkt128to2551hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt128to2551hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 47 }
pmTcaIfPkt128to2551hEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt128to2551hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt128to2551hIndex }
::= { pmTcaIfPkt128to2551hTable 1 }
PMTcaIfPkt128to2551hEntry ::=
SEQUENCE
{
pmTcaIfPkt128to2551hIndex Integer32,
pmTcaIfPkt128to2551hId OCTET STRING,
pmTcaIfPkt128to2551hUnitType INTEGER,
pmTcaIfPkt128to2551hCnt Counter64,
pmTcaIfPkt128to2551hThreshold Counter64,
pmTcaIfPkt128to2551hOccurTime DateAndTime
}
pmTcaIfPkt128to2551hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt128to2551hEntry 1 }
pmTcaIfPkt128to2551hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt128to2551hEntry 2 }
pmTcaIfPkt128to2551hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt128to2551hEntry 3 }
pmTcaIfPkt128to2551hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of packets with size between 128 to 255."
::= { pmTcaIfPkt128to2551hEntry 4 }
pmTcaIfPkt128to2551hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of packets with size between 128 to 255."
::= { pmTcaIfPkt128to2551hEntry 5 }
pmTcaIfPkt128to2551hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt128to2551hEntry 6 }
pmTcaIfPkt128to2551dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt128to2551dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 48 }
pmTcaIfPkt128to2551dEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt128to2551dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt128to2551dIndex }
::= { pmTcaIfPkt128to2551dTable 1 }
PMTcaIfPkt128to2551dEntry ::=
SEQUENCE
{
pmTcaIfPkt128to2551dIndex Integer32,
pmTcaIfPkt128to2551dId OCTET STRING,
pmTcaIfPkt128to2551dUnitType INTEGER,
pmTcaIfPkt128to2551dCnt Counter64,
pmTcaIfPkt128to2551dThreshold Counter64,
pmTcaIfPkt128to2551dOccurTime DateAndTime
}
pmTcaIfPkt128to2551dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt128to2551dEntry 1 }
pmTcaIfPkt128to2551dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt128to2551dEntry 2 }
pmTcaIfPkt128to2551dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt128to2551dEntry 3 }
pmTcaIfPkt128to2551dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of packets with size between 128 to 255."
::= { pmTcaIfPkt128to2551dEntry 4 }
pmTcaIfPkt128to2551dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of packets with size between 128 to 255."
::= { pmTcaIfPkt128to2551dEntry 5 }
pmTcaIfPkt128to2551dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt128to2551dEntry 6 }
pmTcaIfPkt256to51115mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt256to51115mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 49 }
pmTcaIfPkt256to51115mEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt256to51115mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt256to51115mIndex }
::= { pmTcaIfPkt256to51115mTable 1 }
PMTcaIfPkt256to51115mEntry ::=
SEQUENCE
{
pmTcaIfPkt256to51115mIndex Integer32,
pmTcaIfPkt256to51115mId OCTET STRING,
pmTcaIfPkt256to51115mUnitType INTEGER,
pmTcaIfPkt256to51115mCnt Counter64,
pmTcaIfPkt256to51115mThreshold Counter64,
pmTcaIfPkt256to51115mOccurTime DateAndTime
}
pmTcaIfPkt256to51115mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt256to51115mEntry 1 }
pmTcaIfPkt256to51115mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt256to51115mEntry 2 }
pmTcaIfPkt256to51115mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt256to51115mEntry 3 }
pmTcaIfPkt256to51115mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of packets with size between 256 to 511."
::= { pmTcaIfPkt256to51115mEntry 4 }
pmTcaIfPkt256to51115mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of packets with size between 256 to 511."
::= { pmTcaIfPkt256to51115mEntry 5 }
pmTcaIfPkt256to51115mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt256to51115mEntry 6 }
pmTcaIfPkt256to5111hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt256to5111hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 50 }
pmTcaIfPkt256to5111hEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt256to5111hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt256to5111hIndex }
::= { pmTcaIfPkt256to5111hTable 1 }
PMTcaIfPkt256to5111hEntry ::=
SEQUENCE
{
pmTcaIfPkt256to5111hIndex Integer32,
pmTcaIfPkt256to5111hId OCTET STRING,
pmTcaIfPkt256to5111hUnitType INTEGER,
pmTcaIfPkt256to5111hCnt Counter64,
pmTcaIfPkt256to5111hThreshold Counter64,
pmTcaIfPkt256to5111hOccurTime DateAndTime
}
pmTcaIfPkt256to5111hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt256to5111hEntry 1 }
pmTcaIfPkt256to5111hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt256to5111hEntry 2 }
pmTcaIfPkt256to5111hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt256to5111hEntry 3 }
pmTcaIfPkt256to5111hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of packets with size between 256 to 511."
::= { pmTcaIfPkt256to5111hEntry 4 }
pmTcaIfPkt256to5111hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of packets with size between 256 to 511."
::= { pmTcaIfPkt256to5111hEntry 5 }
pmTcaIfPkt256to5111hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt256to5111hEntry 6 }
pmTcaIfPkt256to5111dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt256to5111dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 51 }
pmTcaIfPkt256to5111dEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt256to5111dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt256to5111dIndex }
::= { pmTcaIfPkt256to5111dTable 1 }
PMTcaIfPkt256to5111dEntry ::=
SEQUENCE
{
pmTcaIfPkt256to5111dIndex Integer32,
pmTcaIfPkt256to5111dId OCTET STRING,
pmTcaIfPkt256to5111dUnitType INTEGER,
pmTcaIfPkt256to5111dCnt Counter64,
pmTcaIfPkt256to5111dThreshold Counter64,
pmTcaIfPkt256to5111dOccurTime DateAndTime
}
pmTcaIfPkt256to5111dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt256to5111dEntry 1 }
pmTcaIfPkt256to5111dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt256to5111dEntry 2 }
pmTcaIfPkt256to5111dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt256to5111dEntry 3 }
pmTcaIfPkt256to5111dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of packets with size between 256 to 511."
::= { pmTcaIfPkt256to5111dEntry 4 }
pmTcaIfPkt256to5111dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of packets with size between 256 to 511."
::= { pmTcaIfPkt256to5111dEntry 5 }
pmTcaIfPkt256to5111dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt256to5111dEntry 6 }
pmTcaIfPkt512to102315mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt512to102315mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 52 }
pmTcaIfPkt512to102315mEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt512to102315mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt512to102315mIndex }
::= { pmTcaIfPkt512to102315mTable 1 }
PMTcaIfPkt512to102315mEntry ::=
SEQUENCE
{
pmTcaIfPkt512to102315mIndex Integer32,
pmTcaIfPkt512to102315mId OCTET STRING,
pmTcaIfPkt512to102315mUnitType INTEGER,
pmTcaIfPkt512to102315mCnt Counter64,
pmTcaIfPkt512to102315mThreshold Counter64,
pmTcaIfPkt512to102315mOccurTime DateAndTime
}
pmTcaIfPkt512to102315mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt512to102315mEntry 1 }
pmTcaIfPkt512to102315mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt512to102315mEntry 2 }
pmTcaIfPkt512to102315mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt512to102315mEntry 3 }
pmTcaIfPkt512to102315mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of packets with size between 512 to 1023."
::= { pmTcaIfPkt512to102315mEntry 4 }
pmTcaIfPkt512to102315mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of packets with size between 512 to 1023."
::= { pmTcaIfPkt512to102315mEntry 5 }
pmTcaIfPkt512to102315mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt512to102315mEntry 6 }
pmTcaIfPkt512to10231hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt512to10231hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 53 }
pmTcaIfPkt512to10231hEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt512to10231hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt512to10231hIndex }
::= { pmTcaIfPkt512to10231hTable 1 }
PMTcaIfPkt512to10231hEntry ::=
SEQUENCE
{
pmTcaIfPkt512to10231hIndex Integer32,
pmTcaIfPkt512to10231hId OCTET STRING,
pmTcaIfPkt512to10231hUnitType INTEGER,
pmTcaIfPkt512to10231hCnt Counter64,
pmTcaIfPkt512to10231hThreshold Counter64,
pmTcaIfPkt512to10231hOccurTime DateAndTime
}
pmTcaIfPkt512to10231hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt512to10231hEntry 1 }
pmTcaIfPkt512to10231hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt512to10231hEntry 2 }
pmTcaIfPkt512to10231hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt512to10231hEntry 3 }
pmTcaIfPkt512to10231hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of packets with size between 512 to 1023."
::= { pmTcaIfPkt512to10231hEntry 4 }
pmTcaIfPkt512to10231hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of packets with size between 512 to 1023."
::= { pmTcaIfPkt512to10231hEntry 5 }
pmTcaIfPkt512to10231hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt512to10231hEntry 6 }
pmTcaIfPkt512to10231dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt512to10231dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 54 }
pmTcaIfPkt512to10231dEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt512to10231dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt512to10231dIndex }
::= { pmTcaIfPkt512to10231dTable 1 }
PMTcaIfPkt512to10231dEntry ::=
SEQUENCE
{
pmTcaIfPkt512to10231dIndex Integer32,
pmTcaIfPkt512to10231dId OCTET STRING,
pmTcaIfPkt512to10231dUnitType INTEGER,
pmTcaIfPkt512to10231dCnt Counter64,
pmTcaIfPkt512to10231dThreshold Counter64,
pmTcaIfPkt512to10231dOccurTime DateAndTime
}
pmTcaIfPkt512to10231dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt512to10231dEntry 1 }
pmTcaIfPkt512to10231dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt512to10231dEntry 2 }
pmTcaIfPkt512to10231dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt512to10231dEntry 3 }
pmTcaIfPkt512to10231dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of packets with size between 512 to 1023."
::= { pmTcaIfPkt512to10231dEntry 4 }
pmTcaIfPkt512to10231dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of packets with size between 512 to 1023."
::= { pmTcaIfPkt512to10231dEntry 5 }
pmTcaIfPkt512to10231dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt512to10231dEntry 6 }
pmTcaIfPkt102415mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt102415mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 55 }
pmTcaIfPkt102415mEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt102415mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt102415mIndex }
::= { pmTcaIfPkt102415mTable 1 }
PMTcaIfPkt102415mEntry ::=
SEQUENCE
{
pmTcaIfPkt102415mIndex Integer32,
pmTcaIfPkt102415mId OCTET STRING,
pmTcaIfPkt102415mUnitType INTEGER,
pmTcaIfPkt102415mCnt Counter64,
pmTcaIfPkt102415mThreshold Counter64,
pmTcaIfPkt102415mOccurTime DateAndTime
}
pmTcaIfPkt102415mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt102415mEntry 1 }
pmTcaIfPkt102415mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt102415mEntry 2 }
pmTcaIfPkt102415mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt102415mEntry 3 }
pmTcaIfPkt102415mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of packets with size over 1024."
::= { pmTcaIfPkt102415mEntry 4 }
pmTcaIfPkt102415mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of packets with size over 1024."
::= { pmTcaIfPkt102415mEntry 5 }
pmTcaIfPkt102415mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt102415mEntry 6 }
pmTcaIfPkt10241hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt10241hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 56 }
pmTcaIfPkt10241hEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt10241hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt10241hIndex }
::= { pmTcaIfPkt10241hTable 1 }
PMTcaIfPkt10241hEntry ::=
SEQUENCE
{
pmTcaIfPkt10241hIndex Integer32,
pmTcaIfPkt10241hId OCTET STRING,
pmTcaIfPkt10241hUnitType INTEGER,
pmTcaIfPkt10241hCnt Counter64,
pmTcaIfPkt10241hThreshold Counter64,
pmTcaIfPkt10241hOccurTime DateAndTime
}
pmTcaIfPkt10241hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt10241hEntry 1 }
pmTcaIfPkt10241hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt10241hEntry 2 }
pmTcaIfPkt10241hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt10241hEntry 3 }
pmTcaIfPkt10241hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of packets with size over 1024."
::= { pmTcaIfPkt10241hEntry 4 }
pmTcaIfPkt10241hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of packets with size over 1024."
::= { pmTcaIfPkt10241hEntry 5 }
pmTcaIfPkt10241hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt10241hEntry 6 }
pmTcaIfPkt10241dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfPkt10241dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 57 }
pmTcaIfPkt10241dEntry OBJECT-TYPE
SYNTAX PMTcaIfPkt10241dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfPkt10241dIndex }
::= { pmTcaIfPkt10241dTable 1 }
PMTcaIfPkt10241dEntry ::=
SEQUENCE
{
pmTcaIfPkt10241dIndex Integer32,
pmTcaIfPkt10241dId OCTET STRING,
pmTcaIfPkt10241dUnitType INTEGER,
pmTcaIfPkt10241dCnt Counter64,
pmTcaIfPkt10241dThreshold Counter64,
pmTcaIfPkt10241dOccurTime DateAndTime
}
pmTcaIfPkt10241dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfPkt10241dEntry 1 }
pmTcaIfPkt10241dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfPkt10241dEntry 2 }
pmTcaIfPkt10241dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfPkt10241dEntry 3 }
pmTcaIfPkt10241dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of packets with size over 1024."
::= { pmTcaIfPkt10241dEntry 4 }
pmTcaIfPkt10241dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of packets with size over 1024."
::= { pmTcaIfPkt10241dEntry 5 }
pmTcaIfPkt10241dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfPkt10241dEntry 6 }
pmTcaIfOutPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOutPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 58 }
pmTcaIfOutPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaIfOutPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfOutPkts15mIndex }
::= { pmTcaIfOutPkts15mTable 1 }
PMTcaIfOutPkts15mEntry ::=
SEQUENCE
{
pmTcaIfOutPkts15mIndex Integer32,
pmTcaIfOutPkts15mId OCTET STRING,
pmTcaIfOutPkts15mUnitType INTEGER,
pmTcaIfOutPkts15mCnt Counter64,
pmTcaIfOutPkts15mThreshold Counter64,
pmTcaIfOutPkts15mOccurTime DateAndTime
}
pmTcaIfOutPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOutPkts15mEntry 1 }
pmTcaIfOutPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOutPkts15mEntry 2 }
pmTcaIfOutPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOutPkts15mEntry 3 }
pmTcaIfOutPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of output packets."
::= { pmTcaIfOutPkts15mEntry 4 }
pmTcaIfOutPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of output packets."
::= { pmTcaIfOutPkts15mEntry 5 }
pmTcaIfOutPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOutPkts15mEntry 6 }
pmTcaIfOutPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOutPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 59 }
pmTcaIfOutPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaIfOutPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfOutPkts1hIndex }
::= { pmTcaIfOutPkts1hTable 1 }
PMTcaIfOutPkts1hEntry ::=
SEQUENCE
{
pmTcaIfOutPkts1hIndex Integer32,
pmTcaIfOutPkts1hId OCTET STRING,
pmTcaIfOutPkts1hUnitType INTEGER,
pmTcaIfOutPkts1hCnt Counter64,
pmTcaIfOutPkts1hThreshold Counter64,
pmTcaIfOutPkts1hOccurTime DateAndTime
}
pmTcaIfOutPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOutPkts1hEntry 1 }
pmTcaIfOutPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOutPkts1hEntry 2 }
pmTcaIfOutPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOutPkts1hEntry 3 }
pmTcaIfOutPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of output packets."
::= { pmTcaIfOutPkts1hEntry 4 }
pmTcaIfOutPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of output packets."
::= { pmTcaIfOutPkts1hEntry 5 }
pmTcaIfOutPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOutPkts1hEntry 6 }
pmTcaIfOutPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOutPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 60 }
pmTcaIfOutPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaIfOutPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfOutPkts1dIndex }
::= { pmTcaIfOutPkts1dTable 1 }
PMTcaIfOutPkts1dEntry ::=
SEQUENCE
{
pmTcaIfOutPkts1dIndex Integer32,
pmTcaIfOutPkts1dId OCTET STRING,
pmTcaIfOutPkts1dUnitType INTEGER,
pmTcaIfOutPkts1dCnt Counter64,
pmTcaIfOutPkts1dThreshold Counter64,
pmTcaIfOutPkts1dOccurTime DateAndTime
}
pmTcaIfOutPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOutPkts1dEntry 1 }
pmTcaIfOutPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOutPkts1dEntry 2 }
pmTcaIfOutPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOutPkts1dEntry 3 }
pmTcaIfOutPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of output packets."
::= { pmTcaIfOutPkts1dEntry 4 }
pmTcaIfOutPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of output packets."
::= { pmTcaIfOutPkts1dEntry 5 }
pmTcaIfOutPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOutPkts1dEntry 6 }
pmTcaIfOutBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOutBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 61 }
pmTcaIfOutBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaIfOutBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfOutBytes15mIndex }
::= { pmTcaIfOutBytes15mTable 1 }
PMTcaIfOutBytes15mEntry ::=
SEQUENCE
{
pmTcaIfOutBytes15mIndex Integer32,
pmTcaIfOutBytes15mId OCTET STRING,
pmTcaIfOutBytes15mUnitType INTEGER,
pmTcaIfOutBytes15mCnt Counter64,
pmTcaIfOutBytes15mThreshold Counter64,
pmTcaIfOutBytes15mOccurTime DateAndTime
}
pmTcaIfOutBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOutBytes15mEntry 1 }
pmTcaIfOutBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOutBytes15mEntry 2 }
pmTcaIfOutBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOutBytes15mEntry 3 }
pmTcaIfOutBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of output bytes."
::= { pmTcaIfOutBytes15mEntry 4 }
pmTcaIfOutBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of output bytes."
::= { pmTcaIfOutBytes15mEntry 5 }
pmTcaIfOutBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOutBytes15mEntry 6 }
pmTcaIfOutBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOutBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 62 }
pmTcaIfOutBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaIfOutBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfOutBytes1hIndex }
::= { pmTcaIfOutBytes1hTable 1 }
PMTcaIfOutBytes1hEntry ::=
SEQUENCE
{
pmTcaIfOutBytes1hIndex Integer32,
pmTcaIfOutBytes1hId OCTET STRING,
pmTcaIfOutBytes1hUnitType INTEGER,
pmTcaIfOutBytes1hCnt Counter64,
pmTcaIfOutBytes1hThreshold Counter64,
pmTcaIfOutBytes1hOccurTime DateAndTime
}
pmTcaIfOutBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOutBytes1hEntry 1 }
pmTcaIfOutBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOutBytes1hEntry 2 }
pmTcaIfOutBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOutBytes1hEntry 3 }
pmTcaIfOutBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of output bytes."
::= { pmTcaIfOutBytes1hEntry 4 }
pmTcaIfOutBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of output bytes."
::= { pmTcaIfOutBytes1hEntry 5 }
pmTcaIfOutBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOutBytes1hEntry 6 }
pmTcaIfOutBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaIfOutBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains interface information of all units."
::= { pmIfStatistics 63 }
pmTcaIfOutBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaIfOutBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface information of all units."
INDEX { pmTcaIfOutBytes1dIndex }
::= { pmTcaIfOutBytes1dTable 1 }
PMTcaIfOutBytes1dEntry ::=
SEQUENCE
{
pmTcaIfOutBytes1dIndex Integer32,
pmTcaIfOutBytes1dId OCTET STRING,
pmTcaIfOutBytes1dUnitType INTEGER,
pmTcaIfOutBytes1dCnt Counter64,
pmTcaIfOutBytes1dThreshold Counter64,
pmTcaIfOutBytes1dOccurTime DateAndTime
}
pmTcaIfOutBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaIfOutBytes1dEntry 1 }
pmTcaIfOutBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface name."
::= { pmTcaIfOutBytes1dEntry 2 }
pmTcaIfOutBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaIfOutBytes1dEntry 3 }
pmTcaIfOutBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of output bytes."
::= { pmTcaIfOutBytes1dEntry 4 }
pmTcaIfOutBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of output bytes."
::= { pmTcaIfOutBytes1dEntry 5 }
pmTcaIfOutBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaIfOutBytes1dEntry 6 }
pmLspPe OBJECT IDENTIFIER ::= { pm 103 }
pmLspPeCurr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPeCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 1 }
pmLspPeCurr15mEntry OBJECT-TYPE
SYNTAX PMLspPeCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmLspPeCurr15mIndex }
::= { pmLspPeCurr15mTable 1 }
PMLspPeCurr15mEntry ::=
SEQUENCE
{
pmLspPeCurr15mIndex Integer32,
pmLspPeCurr15mId OCTET STRING,
pmLspPeCurr15mUnitType INTEGER,
pmLspPeCurr15mOutPkts Counter64,
pmLspPeCurr15mOutBytes Counter64,
pmLspPeCurr15mStartTime DateAndTime,
pmLspPeCurr15mStopTime DateAndTime
}
pmLspPeCurr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPeCurr15mEntry 1 }
pmLspPeCurr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmLspPeCurr15mEntry 2 }
pmLspPeCurr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPeCurr15mEntry 3 }
pmLspPeCurr15mOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of lsp-pe out packets."
::= { pmLspPeCurr15mEntry 4 }
pmLspPeCurr15mOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of lsp-pe out bytes."
::= { pmLspPeCurr15mEntry 5 }
pmLspPeCurr15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min start time."
::= { pmLspPeCurr15mEntry 100 }
pmLspPeCurr15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min stop time."
::= { pmLspPeCurr15mEntry 101 }
pmLspPePrev15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPePrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 2 }
pmLspPePrev15mEntry OBJECT-TYPE
SYNTAX PMLspPePrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmLspPePrev15mIndex }
::= { pmLspPePrev15mTable 1 }
PMLspPePrev15mEntry ::=
SEQUENCE
{
pmLspPePrev15mIndex Integer32,
pmLspPePrev15mId OCTET STRING,
pmLspPePrev15mUnitType INTEGER,
pmLspPePrev15mOutPkts Counter64,
pmLspPePrev15mOutBytes Counter64,
pmLspPePrev15mStartTime DateAndTime,
pmLspPePrev15mStopTime DateAndTime
}
pmLspPePrev15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPePrev15mEntry 1 }
pmLspPePrev15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmLspPePrev15mEntry 2 }
pmLspPePrev15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPePrev15mEntry 3 }
pmLspPePrev15mOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of lsp-pe out packets."
::= { pmLspPePrev15mEntry 4 }
pmLspPePrev15mOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of lsp-pe out bytes."
::= { pmLspPePrev15mEntry 5 }
pmLspPePrev15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min start time."
::= { pmLspPePrev15mEntry 100 }
pmLspPePrev15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min stop time."
::= { pmLspPePrev15mEntry 101 }
pmLspPeCurr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPeCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 3 }
pmLspPeCurr1hEntry OBJECT-TYPE
SYNTAX PMLspPeCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmLspPeCurr1hIndex }
::= { pmLspPeCurr1hTable 1 }
PMLspPeCurr1hEntry ::=
SEQUENCE
{
pmLspPeCurr1hIndex Integer32,
pmLspPeCurr1hId OCTET STRING,
pmLspPeCurr1hUnitType INTEGER,
pmLspPeCurr1hOutPkts Counter64,
pmLspPeCurr1hOutBytes Counter64,
pmLspPeCurr1hStartTime DateAndTime,
pmLspPeCurr1hStopTime DateAndTime
}
pmLspPeCurr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPeCurr1hEntry 1 }
pmLspPeCurr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmLspPeCurr1hEntry 2 }
pmLspPeCurr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPeCurr1hEntry 3 }
pmLspPeCurr1hOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of lsp-pe out packets."
::= { pmLspPeCurr1hEntry 4 }
pmLspPeCurr1hOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of lsp-pe out bytes."
::= { pmLspPeCurr1hEntry 5 }
pmLspPeCurr1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour start time."
::= { pmLspPeCurr1hEntry 100 }
pmLspPeCurr1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour stop time."
::= { pmLspPeCurr1hEntry 101 }
pmLspPePrev1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPePrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 4 }
pmLspPePrev1hEntry OBJECT-TYPE
SYNTAX PMLspPePrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmLspPePrev1hIndex }
::= { pmLspPePrev1hTable 1 }
PMLspPePrev1hEntry ::=
SEQUENCE
{
pmLspPePrev1hIndex Integer32,
pmLspPePrev1hId OCTET STRING,
pmLspPePrev1hUnitType INTEGER,
pmLspPePrev1hOutPkts Counter64,
pmLspPePrev1hOutBytes Counter64,
pmLspPePrev1hStartTime DateAndTime,
pmLspPePrev1hStopTime DateAndTime
}
pmLspPePrev1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPePrev1hEntry 1 }
pmLspPePrev1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmLspPePrev1hEntry 2 }
pmLspPePrev1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPePrev1hEntry 3 }
pmLspPePrev1hOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of lsp-pe out packets."
::= { pmLspPePrev1hEntry 4 }
pmLspPePrev1hOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of lsp-pe out bytes."
::= { pmLspPePrev1hEntry 5 }
pmLspPePrev1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour start time."
::= { pmLspPePrev1hEntry 100 }
pmLspPePrev1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour stop time."
::= { pmLspPePrev1hEntry 101 }
pmLspPeCurr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPeCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 5 }
pmLspPeCurr1dEntry OBJECT-TYPE
SYNTAX PMLspPeCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmLspPeCurr1dIndex }
::= { pmLspPeCurr1dTable 1 }
PMLspPeCurr1dEntry ::=
SEQUENCE
{
pmLspPeCurr1dIndex Integer32,
pmLspPeCurr1dId OCTET STRING,
pmLspPeCurr1dUnitType INTEGER,
pmLspPeCurr1dOutPkts Counter64,
pmLspPeCurr1dOutBytes Counter64,
pmLspPeCurr1dStartTime DateAndTime,
pmLspPeCurr1dStopTime DateAndTime
}
pmLspPeCurr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPeCurr1dEntry 1 }
pmLspPeCurr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmLspPeCurr1dEntry 2 }
pmLspPeCurr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPeCurr1dEntry 3 }
pmLspPeCurr1dOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of lsp-pe out packets."
::= { pmLspPeCurr1dEntry 4 }
pmLspPeCurr1dOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of lsp-pe out bytes."
::= { pmLspPeCurr1dEntry 5 }
pmLspPeCurr1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day start time."
::= { pmLspPeCurr1dEntry 100 }
pmLspPeCurr1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day stop time."
::= { pmLspPeCurr1dEntry 101 }
pmLspPePrev1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPePrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 6 }
pmLspPePrev1dEntry OBJECT-TYPE
SYNTAX PMLspPePrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmLspPePrev1dIndex }
::= { pmLspPePrev1dTable 1 }
PMLspPePrev1dEntry ::=
SEQUENCE
{
pmLspPePrev1dIndex Integer32,
pmLspPePrev1dId OCTET STRING,
pmLspPePrev1dUnitType INTEGER,
pmLspPePrev1dOutPkts Counter64,
pmLspPePrev1dOutBytes Counter64,
pmLspPePrev1dStartTime DateAndTime,
pmLspPePrev1dStopTime DateAndTime
}
pmLspPePrev1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPePrev1dEntry 1 }
pmLspPePrev1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmLspPePrev1dEntry 2 }
pmLspPePrev1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPePrev1dEntry 3 }
pmLspPePrev1dOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous1day counter of lsp-pe out packets."
::= { pmLspPePrev1dEntry 4 }
pmLspPePrev1dOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous1day counter of lsp-pe out bytes."
::= { pmLspPePrev1dEntry 5 }
pmLspPePrev1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous1day start time."
::= { pmLspPePrev1dEntry 100 }
pmLspPePrev1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous1day stop time."
::= { pmLspPePrev1dEntry 101 }
pmTcaLspPeOutPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPeOutPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 7 }
pmTcaLspPeOutPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaLspPeOutPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmTcaLspPeOutPkts15mIndex }
::= { pmTcaLspPeOutPkts15mTable 1 }
PMTcaLspPeOutPkts15mEntry ::=
SEQUENCE
{
pmTcaLspPeOutPkts15mIndex Integer32,
pmTcaLspPeOutPkts15mId OCTET STRING,
pmTcaLspPeOutPkts15mUnitType INTEGER,
pmTcaLspPeOutPkts15mCnt Counter64,
pmTcaLspPeOutPkts15mThreshold Counter64,
pmTcaLspPeOutPkts15mOccurTime DateAndTime
}
pmTcaLspPeOutPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPeOutPkts15mEntry 1 }
pmTcaLspPeOutPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmTcaLspPeOutPkts15mEntry 2 }
pmTcaLspPeOutPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPeOutPkts15mEntry 3 }
pmTcaLspPeOutPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of lsp-pe out packets."
::= { pmTcaLspPeOutPkts15mEntry 4 }
pmTcaLspPeOutPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of lsp-pe out packets."
::= { pmTcaLspPeOutPkts15mEntry 5 }
pmTcaLspPeOutPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPeOutPkts15mEntry 6 }
pmTcaLspPeOutPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPeOutPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 8 }
pmTcaLspPeOutPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaLspPeOutPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmTcaLspPeOutPkts1hIndex }
::= { pmTcaLspPeOutPkts1hTable 1 }
PMTcaLspPeOutPkts1hEntry ::=
SEQUENCE
{
pmTcaLspPeOutPkts1hIndex Integer32,
pmTcaLspPeOutPkts1hId OCTET STRING,
pmTcaLspPeOutPkts1hUnitType INTEGER,
pmTcaLspPeOutPkts1hCnt Counter64,
pmTcaLspPeOutPkts1hThreshold Counter64,
pmTcaLspPeOutPkts1hOccurTime DateAndTime
}
pmTcaLspPeOutPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPeOutPkts1hEntry 1 }
pmTcaLspPeOutPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmTcaLspPeOutPkts1hEntry 2 }
pmTcaLspPeOutPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPeOutPkts1hEntry 3 }
pmTcaLspPeOutPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of lsp-pe out packets."
::= { pmTcaLspPeOutPkts1hEntry 4 }
pmTcaLspPeOutPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of lsp-pe out packets."
::= { pmTcaLspPeOutPkts1hEntry 5 }
pmTcaLspPeOutPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPeOutPkts1hEntry 6 }
pmTcaLspPeOutPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPeOutPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 9 }
pmTcaLspPeOutPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaLspPeOutPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmTcaLspPeOutPkts1dIndex }
::= { pmTcaLspPeOutPkts1dTable 1 }
PMTcaLspPeOutPkts1dEntry ::=
SEQUENCE
{
pmTcaLspPeOutPkts1dIndex Integer32,
pmTcaLspPeOutPkts1dId OCTET STRING,
pmTcaLspPeOutPkts1dUnitType INTEGER,
pmTcaLspPeOutPkts1dCnt Counter64,
pmTcaLspPeOutPkts1dThreshold Counter64,
pmTcaLspPeOutPkts1dOccurTime DateAndTime
}
pmTcaLspPeOutPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPeOutPkts1dEntry 1 }
pmTcaLspPeOutPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmTcaLspPeOutPkts1dEntry 2 }
pmTcaLspPeOutPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPeOutPkts1dEntry 3 }
pmTcaLspPeOutPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of lsp-pe out packets."
::= { pmTcaLspPeOutPkts1dEntry 4 }
pmTcaLspPeOutPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of lsp-pe out packets."
::= { pmTcaLspPeOutPkts1dEntry 5 }
pmTcaLspPeOutPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPeOutPkts1dEntry 6 }
pmTcaLspPeOutBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPeOutBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 10 }
pmTcaLspPeOutBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaLspPeOutBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmTcaLspPeOutBytes15mIndex }
::= { pmTcaLspPeOutBytes15mTable 1 }
PMTcaLspPeOutBytes15mEntry ::=
SEQUENCE
{
pmTcaLspPeOutBytes15mIndex Integer32,
pmTcaLspPeOutBytes15mId OCTET STRING,
pmTcaLspPeOutBytes15mUnitType INTEGER,
pmTcaLspPeOutBytes15mCnt Counter64,
pmTcaLspPeOutBytes15mThreshold Counter64,
pmTcaLspPeOutBytes15mOccurTime DateAndTime
}
pmTcaLspPeOutBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPeOutBytes15mEntry 1 }
pmTcaLspPeOutBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmTcaLspPeOutBytes15mEntry 2 }
pmTcaLspPeOutBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPeOutBytes15mEntry 3 }
pmTcaLspPeOutBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of lsp-pe out bytes."
::= { pmTcaLspPeOutBytes15mEntry 4 }
pmTcaLspPeOutBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of lsp-pe out bytes."
::= { pmTcaLspPeOutBytes15mEntry 5 }
pmTcaLspPeOutBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPeOutBytes15mEntry 6 }
pmTcaLspPeOutBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPeOutBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 11 }
pmTcaLspPeOutBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaLspPeOutBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmTcaLspPeOutBytes1hIndex }
::= { pmTcaLspPeOutBytes1hTable 1 }
PMTcaLspPeOutBytes1hEntry ::=
SEQUENCE
{
pmTcaLspPeOutBytes1hIndex Integer32,
pmTcaLspPeOutBytes1hId OCTET STRING,
pmTcaLspPeOutBytes1hUnitType INTEGER,
pmTcaLspPeOutBytes1hCnt Counter64,
pmTcaLspPeOutBytes1hThreshold Counter64,
pmTcaLspPeOutBytes1hOccurTime DateAndTime
}
pmTcaLspPeOutBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPeOutBytes1hEntry 1 }
pmTcaLspPeOutBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmTcaLspPeOutBytes1hEntry 2 }
pmTcaLspPeOutBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPeOutBytes1hEntry 3 }
pmTcaLspPeOutBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of lsp-pe out bytes."
::= { pmTcaLspPeOutBytes1hEntry 4 }
pmTcaLspPeOutBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of lsp-pe out bytes."
::= { pmTcaLspPeOutBytes1hEntry 5 }
pmTcaLspPeOutBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPeOutBytes1hEntry 6 }
pmTcaLspPeOutBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPeOutBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-pe information of all units."
::= { pmLspPe 12 }
pmTcaLspPeOutBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaLspPeOutBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-pe information of all units."
INDEX { pmTcaLspPeOutBytes1dIndex }
::= { pmTcaLspPeOutBytes1dTable 1 }
PMTcaLspPeOutBytes1dEntry ::=
SEQUENCE
{
pmTcaLspPeOutBytes1dIndex Integer32,
pmTcaLspPeOutBytes1dId OCTET STRING,
pmTcaLspPeOutBytes1dUnitType INTEGER,
pmTcaLspPeOutBytes1dCnt Counter64,
pmTcaLspPeOutBytes1dThreshold Counter64,
pmTcaLspPeOutBytes1dOccurTime DateAndTime
}
pmTcaLspPeOutBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPeOutBytes1dEntry 1 }
pmTcaLspPeOutBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-pe name."
::= { pmTcaLspPeOutBytes1dEntry 2 }
pmTcaLspPeOutBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPeOutBytes1dEntry 3 }
pmTcaLspPeOutBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of lsp-pe out bytes."
::= { pmTcaLspPeOutBytes1dEntry 4 }
pmTcaLspPeOutBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of lsp-pe out bytes."
::= { pmTcaLspPeOutBytes1dEntry 5 }
pmTcaLspPeOutBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPeOutBytes1dEntry 6 }
pmLspP OBJECT IDENTIFIER ::= { pm 104 }
pmLspPCurr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 1 }
pmLspPCurr15mEntry OBJECT-TYPE
SYNTAX PMLspPCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ls-p information of all units."
INDEX { pmLspPCurr15mIndex }
::= { pmLspPCurr15mTable 1 }
PMLspPCurr15mEntry ::=
SEQUENCE
{
pmLspPCurr15mIndex Integer32,
pmLspPCurr15mId OCTET STRING,
pmLspPCurr15mUnitType INTEGER,
pmLspPCurr15mEastInPkts Counter64,
pmLspPCurr15mEastInBytes Counter64,
pmLspPCurr15mWestInPkts Counter64,
pmLspPCurr15mWestInBytes Counter64,
pmLspPCurr15mStartTime DateAndTime,
pmLspPCurr15mStopTime DateAndTime
}
pmLspPCurr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPCurr15mEntry 1 }
pmLspPCurr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmLspPCurr15mEntry 2 }
pmLspPCurr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPCurr15mEntry 3 }
pmLspPCurr15mEastInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of lsp-p east ingress packets."
::= { pmLspPCurr15mEntry 4 }
pmLspPCurr15mEastInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of lsp-p east ingress bytes."
::= { pmLspPCurr15mEntry 5 }
pmLspPCurr15mWestInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of lsp-p west ingress packets."
::= { pmLspPCurr15mEntry 6 }
pmLspPCurr15mWestInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of lsp-p west ingress bytes."
::= { pmLspPCurr15mEntry 7 }
pmLspPCurr15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min start time."
::= { pmLspPCurr15mEntry 100 }
pmLspPCurr15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min stop time."
::= { pmLspPCurr15mEntry 101 }
pmLspPPrev15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 2 }
pmLspPPrev15mEntry OBJECT-TYPE
SYNTAX PMLspPPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ls-p information of all units."
INDEX { pmLspPPrev15mIndex }
::= { pmLspPPrev15mTable 1 }
PMLspPPrev15mEntry ::=
SEQUENCE
{
pmLspPPrev15mIndex Integer32,
pmLspPPrev15mId OCTET STRING,
pmLspPPrev15mUnitType INTEGER,
pmLspPPrev15mEastInPkts Counter64,
pmLspPPrev15mEastInBytes Counter64,
pmLspPPrev15mWestInPkts Counter64,
pmLspPPrev15mWestInBytes Counter64,
pmLspPPrev15mStartTime DateAndTime,
pmLspPPrev15mStopTime DateAndTime
}
pmLspPPrev15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPPrev15mEntry 1 }
pmLspPPrev15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmLspPPrev15mEntry 2 }
pmLspPPrev15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPPrev15mEntry 3 }
pmLspPPrev15mEastInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of lsp-p east ingress packets."
::= { pmLspPPrev15mEntry 4 }
pmLspPPrev15mEastInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of lsp-p east ingress bytes."
::= { pmLspPPrev15mEntry 5 }
pmLspPPrev15mWestInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of lsp-p west ingress packets."
::= { pmLspPPrev15mEntry 6 }
pmLspPPrev15mWestInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of lsp-p west ingress bytes."
::= { pmLspPPrev15mEntry 7 }
pmLspPPrev15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min start time."
::= { pmLspPPrev15mEntry 100 }
pmLspPPrev15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min stop time."
::= { pmLspPPrev15mEntry 101 }
pmLspPCurr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 3 }
pmLspPCurr1hEntry OBJECT-TYPE
SYNTAX PMLspPCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ls-p information of all units."
INDEX { pmLspPCurr1hIndex }
::= { pmLspPCurr1hTable 1 }
PMLspPCurr1hEntry ::=
SEQUENCE
{
pmLspPCurr1hIndex Integer32,
pmLspPCurr1hId OCTET STRING,
pmLspPCurr1hUnitType INTEGER,
pmLspPCurr1hEastInPkts Counter64,
pmLspPCurr1hEastInBytes Counter64,
pmLspPCurr1hWestInPkts Counter64,
pmLspPCurr1hWestInBytes Counter64,
pmLspPCurr1hStartTime DateAndTime,
pmLspPCurr1hStopTime DateAndTime
}
pmLspPCurr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPCurr1hEntry 1 }
pmLspPCurr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmLspPCurr1hEntry 2 }
pmLspPCurr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPCurr1hEntry 3 }
pmLspPCurr1hEastInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of lsp-p east ingress packets."
::= { pmLspPCurr1hEntry 4 }
pmLspPCurr1hEastInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of lsp-p east ingress bytes."
::= { pmLspPCurr1hEntry 5 }
pmLspPCurr1hWestInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of lsp-p west ingress packets."
::= { pmLspPCurr1hEntry 6 }
pmLspPCurr1hWestInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of lsp-p west ingress bytes."
::= { pmLspPCurr1hEntry 7 }
pmLspPCurr1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour start time."
::= { pmLspPCurr1hEntry 100 }
pmLspPCurr1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour stop time."
::= { pmLspPCurr1hEntry 101 }
pmLspPPrev1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 4 }
pmLspPPrev1hEntry OBJECT-TYPE
SYNTAX PMLspPPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ls-p information of all units."
INDEX { pmLspPPrev1hIndex }
::= { pmLspPPrev1hTable 1 }
PMLspPPrev1hEntry ::=
SEQUENCE
{
pmLspPPrev1hIndex Integer32,
pmLspPPrev1hId OCTET STRING,
pmLspPPrev1hUnitType INTEGER,
pmLspPPrev1hEastInPkts Counter64,
pmLspPPrev1hEastInBytes Counter64,
pmLspPPrev1hWestInPkts Counter64,
pmLspPPrev1hWestInBytes Counter64,
pmLspPPrev1hStartTime DateAndTime,
pmLspPPrev1hStopTime DateAndTime
}
pmLspPPrev1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPPrev1hEntry 1 }
pmLspPPrev1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmLspPPrev1hEntry 2 }
pmLspPPrev1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPPrev1hEntry 3 }
pmLspPPrev1hEastInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of lsp-p east ingress packets."
::= { pmLspPPrev1hEntry 4 }
pmLspPPrev1hEastInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of lsp-p east ingress bytes."
::= { pmLspPPrev1hEntry 5 }
pmLspPPrev1hWestInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of lsp-p west ingress packets."
::= { pmLspPPrev1hEntry 6 }
pmLspPPrev1hWestInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of lsp-p west ingress bytes."
::= { pmLspPPrev1hEntry 7 }
pmLspPPrev1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour start time."
::= { pmLspPPrev1hEntry 100 }
pmLspPPrev1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour stop time."
::= { pmLspPPrev1hEntry 101 }
pmLspPCurr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 5 }
pmLspPCurr1dEntry OBJECT-TYPE
SYNTAX PMLspPCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ls-p information of all units."
INDEX { pmLspPCurr1dIndex }
::= { pmLspPCurr1dTable 1 }
PMLspPCurr1dEntry ::=
SEQUENCE
{
pmLspPCurr1dIndex Integer32,
pmLspPCurr1dId OCTET STRING,
pmLspPCurr1dUnitType INTEGER,
pmLspPCurr1dEastInPkts Counter64,
pmLspPCurr1dEastInBytes Counter64,
pmLspPCurr1dWestInPkts Counter64,
pmLspPCurr1dWestInBytes Counter64,
pmLspPCurr1dStartTime DateAndTime,
pmLspPCurr1dStopTime DateAndTime
}
pmLspPCurr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPCurr1dEntry 1 }
pmLspPCurr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmLspPCurr1dEntry 2 }
pmLspPCurr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPCurr1dEntry 3 }
pmLspPCurr1dEastInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1d counter of lsp-p east ingress packets."
::= { pmLspPCurr1dEntry 4 }
pmLspPCurr1dEastInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1d counter of lsp-p east ingress bytes."
::= { pmLspPCurr1dEntry 5 }
pmLspPCurr1dWestInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1d counter of lsp-p west ingress packets."
::= { pmLspPCurr1dEntry 6 }
pmLspPCurr1dWestInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1d counter of lsp-p west ingress bytes."
::= { pmLspPCurr1dEntry 7 }
pmLspPCurr1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1d start time."
::= { pmLspPCurr1dEntry 100 }
pmLspPCurr1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1d stop time."
::= { pmLspPCurr1dEntry 101 }
pmLspPPrev1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMLspPPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 6 }
pmLspPPrev1dEntry OBJECT-TYPE
SYNTAX PMLspPPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ls-p information of all units."
INDEX { pmLspPPrev1dIndex }
::= { pmLspPPrev1dTable 1 }
PMLspPPrev1dEntry ::=
SEQUENCE
{
pmLspPPrev1dIndex Integer32,
pmLspPPrev1dId OCTET STRING,
pmLspPPrev1dUnitType INTEGER,
pmLspPPrev1dEastInPkts Counter64,
pmLspPPrev1dEastInBytes Counter64,
pmLspPPrev1dWestInPkts Counter64,
pmLspPPrev1dWestInBytes Counter64,
pmLspPPrev1dStartTime DateAndTime,
pmLspPPrev1dStopTime DateAndTime
}
pmLspPPrev1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmLspPPrev1dEntry 1 }
pmLspPPrev1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmLspPPrev1dEntry 2 }
pmLspPPrev1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmLspPPrev1dEntry 3 }
pmLspPPrev1dEastInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1d counter of lsp-p east ingress packets."
::= { pmLspPPrev1dEntry 4 }
pmLspPPrev1dEastInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1d counter of lsp-p east ingress bytes."
::= { pmLspPPrev1dEntry 5 }
pmLspPPrev1dWestInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1d counter of lsp-p west ingress packets."
::= { pmLspPPrev1dEntry 6 }
pmLspPPrev1dWestInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1d counter of lsp-p west ingress bytes."
::= { pmLspPPrev1dEntry 7 }
pmLspPPrev1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1d start time."
::= { pmLspPPrev1dEntry 100 }
pmLspPPrev1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1d stop time."
::= { pmLspPPrev1dEntry 101 }
pmTcaLspPEastInPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPEastInPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 7 }
pmTcaLspPEastInPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaLspPEastInPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPEastInPkts15mIndex }
::= { pmTcaLspPEastInPkts15mTable 1 }
PMTcaLspPEastInPkts15mEntry ::=
SEQUENCE
{
pmTcaLspPEastInPkts15mIndex Integer32,
pmTcaLspPEastInPkts15mId OCTET STRING,
pmTcaLspPEastInPkts15mUnitType INTEGER,
pmTcaLspPEastInPkts15mCnt Counter64,
pmTcaLspPEastInPkts15mThreshold Counter64,
pmTcaLspPEastInPkts15mOccurTime DateAndTime
}
pmTcaLspPEastInPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPEastInPkts15mEntry 1 }
pmTcaLspPEastInPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPEastInPkts15mEntry 2 }
pmTcaLspPEastInPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPEastInPkts15mEntry 3 }
pmTcaLspPEastInPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of lsp-p east ingress packets."
::= { pmTcaLspPEastInPkts15mEntry 4 }
pmTcaLspPEastInPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of lsp-p east ingress packets."
::= { pmTcaLspPEastInPkts15mEntry 5 }
pmTcaLspPEastInPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPEastInPkts15mEntry 6 }
pmTcaLspPEastInPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPEastInPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 8 }
pmTcaLspPEastInPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaLspPEastInPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPEastInPkts1hIndex }
::= { pmTcaLspPEastInPkts1hTable 1 }
PMTcaLspPEastInPkts1hEntry ::=
SEQUENCE
{
pmTcaLspPEastInPkts1hIndex Integer32,
pmTcaLspPEastInPkts1hId OCTET STRING,
pmTcaLspPEastInPkts1hUnitType INTEGER,
pmTcaLspPEastInPkts1hCnt Counter64,
pmTcaLspPEastInPkts1hThreshold Counter64,
pmTcaLspPEastInPkts1hOccurTime DateAndTime
}
pmTcaLspPEastInPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPEastInPkts1hEntry 1 }
pmTcaLspPEastInPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPEastInPkts1hEntry 2 }
pmTcaLspPEastInPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPEastInPkts1hEntry 3 }
pmTcaLspPEastInPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of lsp-p east ingress packets."
::= { pmTcaLspPEastInPkts1hEntry 4 }
pmTcaLspPEastInPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of lsp-p east ingress packets."
::= { pmTcaLspPEastInPkts1hEntry 5 }
pmTcaLspPEastInPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPEastInPkts1hEntry 6 }
pmTcaLspPEastInPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPEastInPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 9 }
pmTcaLspPEastInPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaLspPEastInPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPEastInPkts1dIndex }
::= { pmTcaLspPEastInPkts1dTable 1 }
PMTcaLspPEastInPkts1dEntry ::=
SEQUENCE
{
pmTcaLspPEastInPkts1dIndex Integer32,
pmTcaLspPEastInPkts1dId OCTET STRING,
pmTcaLspPEastInPkts1dUnitType INTEGER,
pmTcaLspPEastInPkts1dCnt Counter64,
pmTcaLspPEastInPkts1dThreshold Counter64,
pmTcaLspPEastInPkts1dOccurTime DateAndTime
}
pmTcaLspPEastInPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPEastInPkts1dEntry 1 }
pmTcaLspPEastInPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPEastInPkts1dEntry 2 }
pmTcaLspPEastInPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPEastInPkts1dEntry 3 }
pmTcaLspPEastInPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of lsp-p east ingress packets."
::= { pmTcaLspPEastInPkts1dEntry 4 }
pmTcaLspPEastInPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of lsp-p east ingress packets."
::= { pmTcaLspPEastInPkts1dEntry 5 }
pmTcaLspPEastInPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPEastInPkts1dEntry 6 }
pmTcaLspPEastInBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPEastInBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 10 }
pmTcaLspPEastInBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaLspPEastInBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPEastInBytes15mIndex }
::= { pmTcaLspPEastInBytes15mTable 1 }
PMTcaLspPEastInBytes15mEntry ::=
SEQUENCE
{
pmTcaLspPEastInBytes15mIndex Integer32,
pmTcaLspPEastInBytes15mId OCTET STRING,
pmTcaLspPEastInBytes15mUnitType INTEGER,
pmTcaLspPEastInBytes15mCnt Counter64,
pmTcaLspPEastInBytes15mThreshold Counter64,
pmTcaLspPEastInBytes15mOccurTime DateAndTime
}
pmTcaLspPEastInBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPEastInBytes15mEntry 1 }
pmTcaLspPEastInBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPEastInBytes15mEntry 2 }
pmTcaLspPEastInBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPEastInBytes15mEntry 3 }
pmTcaLspPEastInBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of lsp-p east ingress bytes."
::= { pmTcaLspPEastInBytes15mEntry 4 }
pmTcaLspPEastInBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of lsp-p east ingress bytes."
::= { pmTcaLspPEastInBytes15mEntry 5 }
pmTcaLspPEastInBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPEastInBytes15mEntry 6 }
pmTcaLspPEastInBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPEastInBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 11 }
pmTcaLspPEastInBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaLspPEastInBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPEastInBytes1hIndex }
::= { pmTcaLspPEastInBytes1hTable 1 }
PMTcaLspPEastInBytes1hEntry ::=
SEQUENCE
{
pmTcaLspPEastInBytes1hIndex Integer32,
pmTcaLspPEastInBytes1hId OCTET STRING,
pmTcaLspPEastInBytes1hUnitType INTEGER,
pmTcaLspPEastInBytes1hCnt Counter64,
pmTcaLspPEastInBytes1hThreshold Counter64,
pmTcaLspPEastInBytes1hOccurTime DateAndTime
}
pmTcaLspPEastInBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPEastInBytes1hEntry 1 }
pmTcaLspPEastInBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPEastInBytes1hEntry 2 }
pmTcaLspPEastInBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPEastInBytes1hEntry 3 }
pmTcaLspPEastInBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of lsp-p east ingress bytes."
::= { pmTcaLspPEastInBytes1hEntry 4 }
pmTcaLspPEastInBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of lsp-p east ingress bytes."
::= { pmTcaLspPEastInBytes1hEntry 5 }
pmTcaLspPEastInBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPEastInBytes1hEntry 6 }
pmTcaLspPEastInBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPEastInBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 12 }
pmTcaLspPEastInBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaLspPEastInBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPEastInBytes1dIndex }
::= { pmTcaLspPEastInBytes1dTable 1 }
PMTcaLspPEastInBytes1dEntry ::=
SEQUENCE
{
pmTcaLspPEastInBytes1dIndex Integer32,
pmTcaLspPEastInBytes1dId OCTET STRING,
pmTcaLspPEastInBytes1dUnitType INTEGER,
pmTcaLspPEastInBytes1dCnt Counter64,
pmTcaLspPEastInBytes1dThreshold Counter64,
pmTcaLspPEastInBytes1dOccurTime DateAndTime
}
pmTcaLspPEastInBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPEastInBytes1dEntry 1 }
pmTcaLspPEastInBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPEastInBytes1dEntry 2 }
pmTcaLspPEastInBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPEastInBytes1dEntry 3 }
pmTcaLspPEastInBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of lsp-p east ingress bytes."
::= { pmTcaLspPEastInBytes1dEntry 4 }
pmTcaLspPEastInBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of lsp-p east ingress bytes."
::= { pmTcaLspPEastInBytes1dEntry 5 }
pmTcaLspPEastInBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPEastInBytes1dEntry 6 }
pmTcaLspPWestInPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPWestInPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 13 }
pmTcaLspPWestInPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaLspPWestInPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPWestInPkts15mIndex }
::= { pmTcaLspPWestInPkts15mTable 1 }
PMTcaLspPWestInPkts15mEntry ::=
SEQUENCE
{
pmTcaLspPWestInPkts15mIndex Integer32,
pmTcaLspPWestInPkts15mId OCTET STRING,
pmTcaLspPWestInPkts15mUnitType INTEGER,
pmTcaLspPWestInPkts15mCnt Counter64,
pmTcaLspPWestInPkts15mThreshold Counter64,
pmTcaLspPWestInPkts15mOccurTime DateAndTime
}
pmTcaLspPWestInPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPWestInPkts15mEntry 1 }
pmTcaLspPWestInPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPWestInPkts15mEntry 2 }
pmTcaLspPWestInPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPWestInPkts15mEntry 3 }
pmTcaLspPWestInPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of lsp-p west ingress packets."
::= { pmTcaLspPWestInPkts15mEntry 4 }
pmTcaLspPWestInPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of lsp-p west ingress packets."
::= { pmTcaLspPWestInPkts15mEntry 5 }
pmTcaLspPWestInPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPWestInPkts15mEntry 6 }
pmTcaLspPWestInPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPWestInPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 14 }
pmTcaLspPWestInPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaLspPWestInPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPWestInPkts1hIndex }
::= { pmTcaLspPWestInPkts1hTable 1 }
PMTcaLspPWestInPkts1hEntry ::=
SEQUENCE
{
pmTcaLspPWestInPkts1hIndex Integer32,
pmTcaLspPWestInPkts1hId OCTET STRING,
pmTcaLspPWestInPkts1hUnitType INTEGER,
pmTcaLspPWestInPkts1hCnt Counter64,
pmTcaLspPWestInPkts1hThreshold Counter64,
pmTcaLspPWestInPkts1hOccurTime DateAndTime
}
pmTcaLspPWestInPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPWestInPkts1hEntry 1 }
pmTcaLspPWestInPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPWestInPkts1hEntry 2 }
pmTcaLspPWestInPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPWestInPkts1hEntry 3 }
pmTcaLspPWestInPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of lsp-p west ingress packets."
::= { pmTcaLspPWestInPkts1hEntry 4 }
pmTcaLspPWestInPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of lsp-p west ingress packets."
::= { pmTcaLspPWestInPkts1hEntry 5 }
pmTcaLspPWestInPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPWestInPkts1hEntry 6 }
pmTcaLspPWestInPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPWestInPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 15 }
pmTcaLspPWestInPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaLspPWestInPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPWestInPkts1dIndex }
::= { pmTcaLspPWestInPkts1dTable 1 }
PMTcaLspPWestInPkts1dEntry ::=
SEQUENCE
{
pmTcaLspPWestInPkts1dIndex Integer32,
pmTcaLspPWestInPkts1dId OCTET STRING,
pmTcaLspPWestInPkts1dUnitType INTEGER,
pmTcaLspPWestInPkts1dCnt Counter64,
pmTcaLspPWestInPkts1dThreshold Counter64,
pmTcaLspPWestInPkts1dOccurTime DateAndTime
}
pmTcaLspPWestInPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPWestInPkts1dEntry 1 }
pmTcaLspPWestInPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPWestInPkts1dEntry 2 }
pmTcaLspPWestInPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPWestInPkts1dEntry 3 }
pmTcaLspPWestInPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of lsp-p west ingress packets."
::= { pmTcaLspPWestInPkts1dEntry 4 }
pmTcaLspPWestInPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of lsp-p west ingress packets."
::= { pmTcaLspPWestInPkts1dEntry 5 }
pmTcaLspPWestInPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPWestInPkts1dEntry 6 }
pmTcaLspPWestInBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPWestInBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 16 }
pmTcaLspPWestInBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaLspPWestInBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPWestInBytes15mIndex }
::= { pmTcaLspPWestInBytes15mTable 1 }
PMTcaLspPWestInBytes15mEntry ::=
SEQUENCE
{
pmTcaLspPWestInBytes15mIndex Integer32,
pmTcaLspPWestInBytes15mId OCTET STRING,
pmTcaLspPWestInBytes15mUnitType INTEGER,
pmTcaLspPWestInBytes15mCnt Counter64,
pmTcaLspPWestInBytes15mThreshold Counter64,
pmTcaLspPWestInBytes15mOccurTime DateAndTime
}
pmTcaLspPWestInBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPWestInBytes15mEntry 1 }
pmTcaLspPWestInBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPWestInBytes15mEntry 2 }
pmTcaLspPWestInBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPWestInBytes15mEntry 3 }
pmTcaLspPWestInBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of lsp-p west ingress bytes."
::= { pmTcaLspPWestInBytes15mEntry 4 }
pmTcaLspPWestInBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of lsp-p west ingress bytes."
::= { pmTcaLspPWestInBytes15mEntry 5 }
pmTcaLspPWestInBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPWestInBytes15mEntry 6 }
pmTcaLspPWestInBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPWestInBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 17 }
pmTcaLspPWestInBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaLspPWestInBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of lsp-p information of all units."
INDEX { pmTcaLspPWestInBytes1hIndex }
::= { pmTcaLspPWestInBytes1hTable 1 }
PMTcaLspPWestInBytes1hEntry ::=
SEQUENCE
{
pmTcaLspPWestInBytes1hIndex Integer32,
pmTcaLspPWestInBytes1hId OCTET STRING,
pmTcaLspPWestInBytes1hUnitType INTEGER,
pmTcaLspPWestInBytes1hCnt Counter64,
pmTcaLspPWestInBytes1hThreshold Counter64,
pmTcaLspPWestInBytes1hOccurTime DateAndTime
}
pmTcaLspPWestInBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPWestInBytes1hEntry 1 }
pmTcaLspPWestInBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPWestInBytes1hEntry 2 }
pmTcaLspPWestInBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPWestInBytes1hEntry 3 }
pmTcaLspPWestInBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of lsp-p west ingress bytes."
::= { pmTcaLspPWestInBytes1hEntry 4 }
pmTcaLspPWestInBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of lsp-p west ingress bytes."
::= { pmTcaLspPWestInBytes1hEntry 5 }
pmTcaLspPWestInBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPWestInBytes1hEntry 6 }
pmTcaLspPWestInBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaLspPWestInBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains lsp-p information of all units."
::= { pmLspP 18 }
pmTcaLspPWestInBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaLspPWestInBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature lsp-p of all units."
INDEX { pmTcaLspPWestInBytes1dIndex }
::= { pmTcaLspPWestInBytes1dTable 1 }
PMTcaLspPWestInBytes1dEntry ::=
SEQUENCE
{
pmTcaLspPWestInBytes1dIndex Integer32,
pmTcaLspPWestInBytes1dId OCTET STRING,
pmTcaLspPWestInBytes1dUnitType INTEGER,
pmTcaLspPWestInBytes1dCnt Counter64,
pmTcaLspPWestInBytes1dThreshold Counter64,
pmTcaLspPWestInBytes1dOccurTime DateAndTime
}
pmTcaLspPWestInBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaLspPWestInBytes1dEntry 1 }
pmTcaLspPWestInBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsp-p name."
::= { pmTcaLspPWestInBytes1dEntry 2 }
pmTcaLspPWestInBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaLspPWestInBytes1dEntry 3 }
pmTcaLspPWestInBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of lsp-p west ingress bytes."
::= { pmTcaLspPWestInBytes1dEntry 4 }
pmTcaLspPWestInBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of lsp-p west ingress bytes."
::= { pmTcaLspPWestInBytes1dEntry 5 }
pmTcaLspPWestInBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaLspPWestInBytes1dEntry 6 }
pmVpws OBJECT IDENTIFIER ::= { pm 105 }
pmVpwsCurr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVpwsCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 1 }
pmVpwsCurr15mEntry OBJECT-TYPE
SYNTAX PMVpwsCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmVpwsCurr15mIndex }
::= { pmVpwsCurr15mTable 1 }
PMVpwsCurr15mEntry ::=
SEQUENCE
{
pmVpwsCurr15mIndex Integer32,
pmVpwsCurr15mId OCTET STRING,
pmVpwsCurr15mUnitType INTEGER,
pmVpwsCurr15mIngressPkts Counter64,
pmVpwsCurr15mIngressBytes Counter64,
pmVpwsCurr15mEgressPkts Counter64,
pmVpwsCurr15mEgressBytes Counter64,
pmVpwsCurr15mStartTime DateAndTime,
pmVpwsCurr15mStopTime DateAndTime
}
pmVpwsCurr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVpwsCurr15mEntry 1 }
pmVpwsCurr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmVpwsCurr15mEntry 2 }
pmVpwsCurr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVpwsCurr15mEntry 3 }
pmVpwsCurr15mIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpws ingress packets."
::= { pmVpwsCurr15mEntry 4 }
pmVpwsCurr15mIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpws ingress bytes."
::= { pmVpwsCurr15mEntry 5 }
pmVpwsCurr15mEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpws egress packets."
::= { pmVpwsCurr15mEntry 6 }
pmVpwsCurr15mEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpws egress bytes."
::= { pmVpwsCurr15mEntry 7 }
pmVpwsCurr15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min start time."
::= { pmVpwsCurr15mEntry 100 }
pmVpwsCurr15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min stop time."
::= { pmVpwsCurr15mEntry 101 }
pmVpwsPrev15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVpwsPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 2 }
pmVpwsPrev15mEntry OBJECT-TYPE
SYNTAX PMVpwsPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmVpwsPrev15mIndex }
::= { pmVpwsPrev15mTable 1 }
PMVpwsPrev15mEntry ::=
SEQUENCE
{
pmVpwsPrev15mIndex Integer32,
pmVpwsPrev15mId OCTET STRING,
pmVpwsPrev15mUnitType INTEGER,
pmVpwsPrev15mIngressPkts Counter64,
pmVpwsPrev15mIngressBytes Counter64,
pmVpwsPrev15mEgressPkts Counter64,
pmVpwsPrev15mEgressBytes Counter64,
pmVpwsPrev15mStartTime DateAndTime,
pmVpwsPrev15mStopTime DateAndTime
}
pmVpwsPrev15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVpwsPrev15mEntry 1 }
pmVpwsPrev15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmVpwsPrev15mEntry 2 }
pmVpwsPrev15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVpwsPrev15mEntry 3 }
pmVpwsPrev15mIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpws ingress packets."
::= { pmVpwsPrev15mEntry 4 }
pmVpwsPrev15mIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpws ingress bytes."
::= { pmVpwsPrev15mEntry 5 }
pmVpwsPrev15mEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpws egress packets."
::= { pmVpwsPrev15mEntry 6 }
pmVpwsPrev15mEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpws egress bytes."
::= { pmVpwsPrev15mEntry 7 }
pmVpwsPrev15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min start time."
::= { pmVpwsPrev15mEntry 100 }
pmVpwsPrev15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min stop time."
::= { pmVpwsPrev15mEntry 101 }
pmVpwsCurr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVpwsCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 3 }
pmVpwsCurr1hEntry OBJECT-TYPE
SYNTAX PMVpwsCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmVpwsCurr1hIndex }
::= { pmVpwsCurr1hTable 1 }
PMVpwsCurr1hEntry ::=
SEQUENCE
{
pmVpwsCurr1hIndex Integer32,
pmVpwsCurr1hId OCTET STRING,
pmVpwsCurr1hUnitType INTEGER,
pmVpwsCurr1hIngressPkts Counter64,
pmVpwsCurr1hIngressBytes Counter64,
pmVpwsCurr1hEgressPkts Counter64,
pmVpwsCurr1hEgressBytes Counter64,
pmVpwsCurr1hStartTime DateAndTime,
pmVpwsCurr1hStopTime DateAndTime
}
pmVpwsCurr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVpwsCurr1hEntry 1 }
pmVpwsCurr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmVpwsCurr1hEntry 2 }
pmVpwsCurr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVpwsCurr1hEntry 3 }
pmVpwsCurr1hIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpws ingress packets."
::= { pmVpwsCurr1hEntry 4 }
pmVpwsCurr1hIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpws ingress bytes."
::= { pmVpwsCurr1hEntry 5 }
pmVpwsCurr1hEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpws egress packets."
::= { pmVpwsCurr1hEntry 6 }
pmVpwsCurr1hEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpws egress bytes."
::= { pmVpwsCurr1hEntry 7 }
pmVpwsCurr1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour start time."
::= { pmVpwsCurr1hEntry 100 }
pmVpwsCurr1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour stop time."
::= { pmVpwsCurr1hEntry 101 }
pmVpwsPrev1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVpwsPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 4 }
pmVpwsPrev1hEntry OBJECT-TYPE
SYNTAX PMVpwsPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmVpwsPrev1hIndex }
::= { pmVpwsPrev1hTable 1 }
PMVpwsPrev1hEntry ::=
SEQUENCE
{
pmVpwsPrev1hIndex Integer32,
pmVpwsPrev1hId OCTET STRING,
pmVpwsPrev1hUnitType INTEGER,
pmVpwsPrev1hIngressPkts Counter64,
pmVpwsPrev1hIngressBytes Counter64,
pmVpwsPrev1hEgressPkts Counter64,
pmVpwsPrev1hEgressBytes Counter64,
pmVpwsPrev1hStartTime DateAndTime,
pmVpwsPrev1hStopTime DateAndTime
}
pmVpwsPrev1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVpwsPrev1hEntry 1 }
pmVpwsPrev1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmVpwsPrev1hEntry 2 }
pmVpwsPrev1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVpwsPrev1hEntry 3 }
pmVpwsPrev1hIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpws ingress packets."
::= { pmVpwsPrev1hEntry 4 }
pmVpwsPrev1hIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpws ingress bytes."
::= { pmVpwsPrev1hEntry 5 }
pmVpwsPrev1hEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpws egress packets."
::= { pmVpwsPrev1hEntry 6 }
pmVpwsPrev1hEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpws egress bytes."
::= { pmVpwsPrev1hEntry 7 }
pmVpwsPrev1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour start time."
::= { pmVpwsPrev1hEntry 100 }
pmVpwsPrev1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour stop time."
::= { pmVpwsPrev1hEntry 101 }
pmVpwsCurr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVpwsCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 5 }
pmVpwsCurr1dEntry OBJECT-TYPE
SYNTAX PMVpwsCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmVpwsCurr1dIndex }
::= { pmVpwsCurr1dTable 1 }
PMVpwsCurr1dEntry ::=
SEQUENCE
{
pmVpwsCurr1dIndex Integer32,
pmVpwsCurr1dId OCTET STRING,
pmVpwsCurr1dUnitType INTEGER,
pmVpwsCurr1dIngressPkts Counter64,
pmVpwsCurr1dIngressBytes Counter64,
pmVpwsCurr1dEgressPkts Counter64,
pmVpwsCurr1dEgressBytes Counter64,
pmVpwsCurr1dStartTime DateAndTime,
pmVpwsCurr1dStopTime DateAndTime
}
pmVpwsCurr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVpwsCurr1dEntry 1 }
pmVpwsCurr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmVpwsCurr1dEntry 2 }
pmVpwsCurr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVpwsCurr1dEntry 3 }
pmVpwsCurr1dIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpws ingress packets."
::= { pmVpwsCurr1dEntry 4 }
pmVpwsCurr1dIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpws ingress bytes."
::= { pmVpwsCurr1dEntry 5 }
pmVpwsCurr1dEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpws egress packets."
::= { pmVpwsCurr1dEntry 6 }
pmVpwsCurr1dEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpws egress bytes."
::= { pmVpwsCurr1dEntry 7 }
pmVpwsCurr1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day start time."
::= { pmVpwsCurr1dEntry 100 }
pmVpwsCurr1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day stop time."
::= { pmVpwsCurr1dEntry 101 }
pmVpwsPrev1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVpwsPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 6 }
pmVpwsPrev1dEntry OBJECT-TYPE
SYNTAX PMVpwsPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmVpwsPrev1dIndex }
::= { pmVpwsPrev1dTable 1 }
PMVpwsPrev1dEntry ::=
SEQUENCE
{
pmVpwsPrev1dIndex Integer32,
pmVpwsPrev1dId OCTET STRING,
pmVpwsPrev1dUnitType INTEGER,
pmVpwsPrev1dIngressPkts Counter64,
pmVpwsPrev1dIngressBytes Counter64,
pmVpwsPrev1dEgressPkts Counter64,
pmVpwsPrev1dEgressBytes Counter64,
pmVpwsPrev1dStartTime DateAndTime,
pmVpwsPrev1dStopTime DateAndTime
}
pmVpwsPrev1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVpwsPrev1dEntry 1 }
pmVpwsPrev1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmVpwsPrev1dEntry 2 }
pmVpwsPrev1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVpwsPrev1dEntry 3 }
pmVpwsPrev1dIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpws ingress packets."
::= { pmVpwsPrev1dEntry 4 }
pmVpwsPrev1dIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpws ingress bytes."
::= { pmVpwsPrev1dEntry 5 }
pmVpwsPrev1dEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpws egress packets."
::= { pmVpwsPrev1dEntry 6 }
pmVpwsPrev1dEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpws egress bytes."
::= { pmVpwsPrev1dEntry 7 }
pmVpwsPrev1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day start time."
::= { pmVpwsPrev1dEntry 100 }
pmVpwsPrev1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day stop time."
::= { pmVpwsPrev1dEntry 101 }
pmTcaVpwsIngressPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsIngressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 7 }
pmTcaVpwsIngressPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaVpwsIngressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsIngressPkts15mIndex }
::= { pmTcaVpwsIngressPkts15mTable 1 }
PMTcaVpwsIngressPkts15mEntry ::=
SEQUENCE
{
pmTcaVpwsIngressPkts15mIndex Integer32,
pmTcaVpwsIngressPkts15mId OCTET STRING,
pmTcaVpwsIngressPkts15mUnitType INTEGER,
pmTcaVpwsIngressPkts15mCnt Counter64,
pmTcaVpwsIngressPkts15mThreshold Counter64,
pmTcaVpwsIngressPkts15mOccurTime DateAndTime
}
pmTcaVpwsIngressPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsIngressPkts15mEntry 1 }
pmTcaVpwsIngressPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsIngressPkts15mEntry 2 }
pmTcaVpwsIngressPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsIngressPkts15mEntry 3 }
pmTcaVpwsIngressPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpws ingress packets."
::= { pmTcaVpwsIngressPkts15mEntry 4 }
pmTcaVpwsIngressPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpws ingress packets."
::= { pmTcaVpwsIngressPkts15mEntry 5 }
pmTcaVpwsIngressPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsIngressPkts15mEntry 6 }
pmTcaVpwsIngressPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsIngressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 8 }
pmTcaVpwsIngressPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaVpwsIngressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsIngressPkts1hIndex }
::= { pmTcaVpwsIngressPkts1hTable 1 }
PMTcaVpwsIngressPkts1hEntry ::=
SEQUENCE
{
pmTcaVpwsIngressPkts1hIndex Integer32,
pmTcaVpwsIngressPkts1hId OCTET STRING,
pmTcaVpwsIngressPkts1hUnitType INTEGER,
pmTcaVpwsIngressPkts1hCnt Counter64,
pmTcaVpwsIngressPkts1hThreshold Counter64,
pmTcaVpwsIngressPkts1hOccurTime DateAndTime
}
pmTcaVpwsIngressPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsIngressPkts1hEntry 1 }
pmTcaVpwsIngressPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsIngressPkts1hEntry 2 }
pmTcaVpwsIngressPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsIngressPkts1hEntry 3 }
pmTcaVpwsIngressPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpws ingress packets."
::= { pmTcaVpwsIngressPkts1hEntry 4 }
pmTcaVpwsIngressPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpws ingress packets."
::= { pmTcaVpwsIngressPkts1hEntry 5 }
pmTcaVpwsIngressPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsIngressPkts1hEntry 6 }
pmTcaVpwsIngressPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsIngressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 9 }
pmTcaVpwsIngressPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaVpwsIngressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsIngressPkts1dIndex }
::= { pmTcaVpwsIngressPkts1dTable 1 }
PMTcaVpwsIngressPkts1dEntry ::=
SEQUENCE
{
pmTcaVpwsIngressPkts1dIndex Integer32,
pmTcaVpwsIngressPkts1dId OCTET STRING,
pmTcaVpwsIngressPkts1dUnitType INTEGER,
pmTcaVpwsIngressPkts1dCnt Counter64,
pmTcaVpwsIngressPkts1dThreshold Counter64,
pmTcaVpwsIngressPkts1dOccurTime DateAndTime
}
pmTcaVpwsIngressPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsIngressPkts1dEntry 1 }
pmTcaVpwsIngressPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsIngressPkts1dEntry 2 }
pmTcaVpwsIngressPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsIngressPkts1dEntry 3 }
pmTcaVpwsIngressPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpws ingress packets."
::= { pmTcaVpwsIngressPkts1dEntry 4 }
pmTcaVpwsIngressPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpws ingress packets."
::= { pmTcaVpwsIngressPkts1dEntry 5 }
pmTcaVpwsIngressPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsIngressPkts1dEntry 6 }
pmTcaVpwsIngressBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsIngressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 10 }
pmTcaVpwsIngressBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaVpwsIngressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsIngressBytes15mIndex }
::= { pmTcaVpwsIngressBytes15mTable 1 }
PMTcaVpwsIngressBytes15mEntry ::=
SEQUENCE
{
pmTcaVpwsIngressBytes15mIndex Integer32,
pmTcaVpwsIngressBytes15mId OCTET STRING,
pmTcaVpwsIngressBytes15mUnitType INTEGER,
pmTcaVpwsIngressBytes15mCnt Counter64,
pmTcaVpwsIngressBytes15mThreshold Counter64,
pmTcaVpwsIngressBytes15mOccurTime DateAndTime
}
pmTcaVpwsIngressBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsIngressBytes15mEntry 1 }
pmTcaVpwsIngressBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsIngressBytes15mEntry 2 }
pmTcaVpwsIngressBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsIngressBytes15mEntry 3 }
pmTcaVpwsIngressBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpws ingress bytes."
::= { pmTcaVpwsIngressBytes15mEntry 4 }
pmTcaVpwsIngressBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpws ingress bytes."
::= { pmTcaVpwsIngressBytes15mEntry 5 }
pmTcaVpwsIngressBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsIngressBytes15mEntry 6 }
pmTcaVpwsIngressBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsIngressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 11 }
pmTcaVpwsIngressBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaVpwsIngressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsIngressBytes1hIndex }
::= { pmTcaVpwsIngressBytes1hTable 1 }
PMTcaVpwsIngressBytes1hEntry ::=
SEQUENCE
{
pmTcaVpwsIngressBytes1hIndex Integer32,
pmTcaVpwsIngressBytes1hId OCTET STRING,
pmTcaVpwsIngressBytes1hUnitType INTEGER,
pmTcaVpwsIngressBytes1hCnt Counter64,
pmTcaVpwsIngressBytes1hThreshold Counter64,
pmTcaVpwsIngressBytes1hOccurTime DateAndTime
}
pmTcaVpwsIngressBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsIngressBytes1hEntry 1 }
pmTcaVpwsIngressBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsIngressBytes1hEntry 2 }
pmTcaVpwsIngressBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsIngressBytes1hEntry 3 }
pmTcaVpwsIngressBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpws ingress bytes."
::= { pmTcaVpwsIngressBytes1hEntry 4 }
pmTcaVpwsIngressBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpws ingress bytes."
::= { pmTcaVpwsIngressBytes1hEntry 5 }
pmTcaVpwsIngressBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsIngressBytes1hEntry 6 }
pmTcaVpwsIngressBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsIngressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 12 }
pmTcaVpwsIngressBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaVpwsIngressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsIngressBytes1dIndex }
::= { pmTcaVpwsIngressBytes1dTable 1 }
PMTcaVpwsIngressBytes1dEntry ::=
SEQUENCE
{
pmTcaVpwsIngressBytes1dIndex Integer32,
pmTcaVpwsIngressBytes1dId OCTET STRING,
pmTcaVpwsIngressBytes1dUnitType INTEGER,
pmTcaVpwsIngressBytes1dCnt Counter64,
pmTcaVpwsIngressBytes1dThreshold Counter64,
pmTcaVpwsIngressBytes1dOccurTime DateAndTime
}
pmTcaVpwsIngressBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsIngressBytes1dEntry 1 }
pmTcaVpwsIngressBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsIngressBytes1dEntry 2 }
pmTcaVpwsIngressBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsIngressBytes1dEntry 3 }
pmTcaVpwsIngressBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpws ingress bytes."
::= { pmTcaVpwsIngressBytes1dEntry 4 }
pmTcaVpwsIngressBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpws ingress bytes."
::= { pmTcaVpwsIngressBytes1dEntry 5 }
pmTcaVpwsIngressBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsIngressBytes1dEntry 6 }
pmTcaVpwsEgressPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsEgressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 13 }
pmTcaVpwsEgressPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaVpwsEgressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsEgressPkts15mIndex }
::= { pmTcaVpwsEgressPkts15mTable 1 }
PMTcaVpwsEgressPkts15mEntry ::=
SEQUENCE
{
pmTcaVpwsEgressPkts15mIndex Integer32,
pmTcaVpwsEgressPkts15mId OCTET STRING,
pmTcaVpwsEgressPkts15mUnitType INTEGER,
pmTcaVpwsEgressPkts15mCnt Counter64,
pmTcaVpwsEgressPkts15mThreshold Counter64,
pmTcaVpwsEgressPkts15mOccurTime DateAndTime
}
pmTcaVpwsEgressPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsEgressPkts15mEntry 1 }
pmTcaVpwsEgressPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsEgressPkts15mEntry 2 }
pmTcaVpwsEgressPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsEgressPkts15mEntry 3 }
pmTcaVpwsEgressPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpws egress packets."
::= { pmTcaVpwsEgressPkts15mEntry 4 }
pmTcaVpwsEgressPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpws egress packets."
::= { pmTcaVpwsEgressPkts15mEntry 5 }
pmTcaVpwsEgressPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsEgressPkts15mEntry 6 }
pmTcaVpwsEgressPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsEgressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 14 }
pmTcaVpwsEgressPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaVpwsEgressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsEgressPkts1hIndex }
::= { pmTcaVpwsEgressPkts1hTable 1 }
PMTcaVpwsEgressPkts1hEntry ::=
SEQUENCE
{
pmTcaVpwsEgressPkts1hIndex Integer32,
pmTcaVpwsEgressPkts1hId OCTET STRING,
pmTcaVpwsEgressPkts1hUnitType INTEGER,
pmTcaVpwsEgressPkts1hCnt Counter64,
pmTcaVpwsEgressPkts1hThreshold Counter64,
pmTcaVpwsEgressPkts1hOccurTime DateAndTime
}
pmTcaVpwsEgressPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsEgressPkts1hEntry 1 }
pmTcaVpwsEgressPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsEgressPkts1hEntry 2 }
pmTcaVpwsEgressPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsEgressPkts1hEntry 3 }
pmTcaVpwsEgressPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpws egress packets."
::= { pmTcaVpwsEgressPkts1hEntry 4 }
pmTcaVpwsEgressPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpws egress packets."
::= { pmTcaVpwsEgressPkts1hEntry 5 }
pmTcaVpwsEgressPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsEgressPkts1hEntry 6 }
pmTcaVpwsEgressPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsEgressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 15 }
pmTcaVpwsEgressPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaVpwsEgressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsEgressPkts1dIndex }
::= { pmTcaVpwsEgressPkts1dTable 1 }
PMTcaVpwsEgressPkts1dEntry ::=
SEQUENCE
{
pmTcaVpwsEgressPkts1dIndex Integer32,
pmTcaVpwsEgressPkts1dId OCTET STRING,
pmTcaVpwsEgressPkts1dUnitType INTEGER,
pmTcaVpwsEgressPkts1dCnt Counter64,
pmTcaVpwsEgressPkts1dThreshold Counter64,
pmTcaVpwsEgressPkts1dOccurTime DateAndTime
}
pmTcaVpwsEgressPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsEgressPkts1dEntry 1 }
pmTcaVpwsEgressPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsEgressPkts1dEntry 2 }
pmTcaVpwsEgressPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsEgressPkts1dEntry 3 }
pmTcaVpwsEgressPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpws egress packets."
::= { pmTcaVpwsEgressPkts1dEntry 4 }
pmTcaVpwsEgressPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpws egress packets."
::= { pmTcaVpwsEgressPkts1dEntry 5 }
pmTcaVpwsEgressPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsEgressPkts1dEntry 6 }
pmTcaVpwsEgressBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsEgressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 16 }
pmTcaVpwsEgressBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaVpwsEgressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsEgressBytes15mIndex }
::= { pmTcaVpwsEgressBytes15mTable 1 }
PMTcaVpwsEgressBytes15mEntry ::=
SEQUENCE
{
pmTcaVpwsEgressBytes15mIndex Integer32,
pmTcaVpwsEgressBytes15mId OCTET STRING,
pmTcaVpwsEgressBytes15mUnitType INTEGER,
pmTcaVpwsEgressBytes15mCnt Counter64,
pmTcaVpwsEgressBytes15mThreshold Counter64,
pmTcaVpwsEgressBytes15mOccurTime DateAndTime
}
pmTcaVpwsEgressBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsEgressBytes15mEntry 1 }
pmTcaVpwsEgressBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsEgressBytes15mEntry 2 }
pmTcaVpwsEgressBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsEgressBytes15mEntry 3 }
pmTcaVpwsEgressBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpws egress bytes."
::= { pmTcaVpwsEgressBytes15mEntry 4 }
pmTcaVpwsEgressBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpws egress bytes."
::= { pmTcaVpwsEgressBytes15mEntry 5 }
pmTcaVpwsEgressBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsEgressBytes15mEntry 6 }
pmTcaVpwsEgressBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsEgressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 17 }
pmTcaVpwsEgressBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaVpwsEgressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsEgressBytes1hIndex }
::= { pmTcaVpwsEgressBytes1hTable 1 }
PMTcaVpwsEgressBytes1hEntry ::=
SEQUENCE
{
pmTcaVpwsEgressBytes1hIndex Integer32,
pmTcaVpwsEgressBytes1hId OCTET STRING,
pmTcaVpwsEgressBytes1hUnitType INTEGER,
pmTcaVpwsEgressBytes1hCnt Counter64,
pmTcaVpwsEgressBytes1hThreshold Counter64,
pmTcaVpwsEgressBytes1hOccurTime DateAndTime
}
pmTcaVpwsEgressBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsEgressBytes1hEntry 1 }
pmTcaVpwsEgressBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsEgressBytes1hEntry 2 }
pmTcaVpwsEgressBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsEgressBytes1hEntry 3 }
pmTcaVpwsEgressBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpws egress bytes."
::= { pmTcaVpwsEgressBytes1hEntry 4 }
pmTcaVpwsEgressBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpws egress bytes."
::= { pmTcaVpwsEgressBytes1hEntry 5 }
pmTcaVpwsEgressBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsEgressBytes1hEntry 6 }
pmTcaVpwsEgressBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVpwsEgressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpws information of all units."
::= { pmVpws 18 }
pmTcaVpwsEgressBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaVpwsEgressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpws information of all units."
INDEX { pmTcaVpwsEgressBytes1dIndex }
::= { pmTcaVpwsEgressBytes1dTable 1 }
PMTcaVpwsEgressBytes1dEntry ::=
SEQUENCE
{
pmTcaVpwsEgressBytes1dIndex Integer32,
pmTcaVpwsEgressBytes1dId OCTET STRING,
pmTcaVpwsEgressBytes1dUnitType INTEGER,
pmTcaVpwsEgressBytes1dCnt Counter64,
pmTcaVpwsEgressBytes1dThreshold Counter64,
pmTcaVpwsEgressBytes1dOccurTime DateAndTime
}
pmTcaVpwsEgressBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVpwsEgressBytes1dEntry 1 }
pmTcaVpwsEgressBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpws name."
::= { pmTcaVpwsEgressBytes1dEntry 2 }
pmTcaVpwsEgressBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVpwsEgressBytes1dEntry 3 }
pmTcaVpwsEgressBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpws egress bytes."
::= { pmTcaVpwsEgressBytes1dEntry 4 }
pmTcaVpwsEgressBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpws egress bytes."
::= { pmTcaVpwsEgressBytes1dEntry 5 }
pmTcaVpwsEgressBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVpwsEgressBytes1dEntry 6 }
pmVpls OBJECT IDENTIFIER ::= { pm 106 }
pmVplsCurr15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVplsCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 1 }
pmVplsCurr15mEntry OBJECT-TYPE
SYNTAX PMVplsCurr15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmVplsCurr15mIndex }
::= { pmVplsCurr15mTable 1 }
PMVplsCurr15mEntry ::=
SEQUENCE
{
pmVplsCurr15mIndex Integer32,
pmVplsCurr15mId OCTET STRING,
pmVplsCurr15mUnitType INTEGER,
pmVplsCurr15mIngressPkts Counter64,
pmVplsCurr15mIngressBytes Counter64,
pmVplsCurr15mEgressPkts Counter64,
pmVplsCurr15mEgressBytes Counter64,
pmVplsCurr15mStartTime DateAndTime,
pmVplsCurr15mStopTime DateAndTime
}
pmVplsCurr15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVplsCurr15mEntry 1 }
pmVplsCurr15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls name."
::= { pmVplsCurr15mEntry 2 }
pmVplsCurr15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVplsCurr15mEntry 3 }
pmVplsCurr15mIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpls ingress packets."
::= { pmVplsCurr15mEntry 4 }
pmVplsCurr15mIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpls ingress bytes."
::= { pmVplsCurr15mEntry 5 }
pmVplsCurr15mEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpls egress packets."
::= { pmVplsCurr15mEntry 6 }
pmVplsCurr15mEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min counter of vpls egress bytes."
::= { pmVplsCurr15mEntry 7 }
pmVplsCurr15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min start time."
::= { pmVplsCurr15mEntry 100 }
pmVplsCurr15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 15min stop time."
::= { pmVplsCurr15mEntry 101 }
pmVplsPrev15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVplsPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 2 }
pmVplsPrev15mEntry OBJECT-TYPE
SYNTAX PMVplsPrev15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmVplsPrev15mIndex }
::= { pmVplsPrev15mTable 1 }
PMVplsPrev15mEntry ::=
SEQUENCE
{
pmVplsPrev15mIndex Integer32,
pmVplsPrev15mId OCTET STRING,
pmVplsPrev15mUnitType INTEGER,
pmVplsPrev15mIngressPkts Counter64,
pmVplsPrev15mIngressBytes Counter64,
pmVplsPrev15mEgressPkts Counter64,
pmVplsPrev15mEgressBytes Counter64,
pmVplsPrev15mStartTime DateAndTime,
pmVplsPrev15mStopTime DateAndTime
}
pmVplsPrev15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVplsPrev15mEntry 1 }
pmVplsPrev15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls name."
::= { pmVplsPrev15mEntry 2 }
pmVplsPrev15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVplsPrev15mEntry 3 }
pmVplsPrev15mIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpls ingress packets."
::= { pmVplsPrev15mEntry 4 }
pmVplsPrev15mIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpls ingress bytes."
::= { pmVplsPrev15mEntry 5 }
pmVplsPrev15mEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpls egress packets."
::= { pmVplsPrev15mEntry 6 }
pmVplsPrev15mEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min counter of vpls egress bytes."
::= { pmVplsPrev15mEntry 7 }
pmVplsPrev15mStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min start time."
::= { pmVplsPrev15mEntry 100 }
pmVplsPrev15mStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 15min stop time."
::= { pmVplsPrev15mEntry 101 }
pmVplsCurr1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVplsCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 3 }
pmVplsCurr1hEntry OBJECT-TYPE
SYNTAX PMVplsCurr1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmVplsCurr1hIndex }
::= { pmVplsCurr1hTable 1 }
PMVplsCurr1hEntry ::=
SEQUENCE
{
pmVplsCurr1hIndex Integer32,
pmVplsCurr1hId OCTET STRING,
pmVplsCurr1hUnitType INTEGER,
pmVplsCurr1hIngressPkts Counter64,
pmVplsCurr1hIngressBytes Counter64,
pmVplsCurr1hEgressPkts Counter64,
pmVplsCurr1hEgressBytes Counter64,
pmVplsCurr1hStartTime DateAndTime,
pmVplsCurr1hStopTime DateAndTime
}
pmVplsCurr1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVplsCurr1hEntry 1 }
pmVplsCurr1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls name."
::= { pmVplsCurr1hEntry 2 }
pmVplsCurr1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVplsCurr1hEntry 3 }
pmVplsCurr1hIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpls ingress packets."
::= { pmVplsCurr1hEntry 4 }
pmVplsCurr1hIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpls ingress bytes."
::= { pmVplsCurr1hEntry 5 }
pmVplsCurr1hEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpls egress packets."
::= { pmVplsCurr1hEntry 6 }
pmVplsCurr1hEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour counter of vpls egress bytes."
::= { pmVplsCurr1hEntry 7 }
pmVplsCurr1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour start time."
::= { pmVplsCurr1hEntry 100 }
pmVplsCurr1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1hour stop time."
::= { pmVplsCurr1hEntry 101 }
pmVplsPrev1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVplsPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 4 }
pmVplsPrev1hEntry OBJECT-TYPE
SYNTAX PMVplsPrev1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmVplsPrev1hIndex }
::= { pmVplsPrev1hTable 1 }
PMVplsPrev1hEntry ::=
SEQUENCE
{
pmVplsPrev1hIndex Integer32,
pmVplsPrev1hId OCTET STRING,
pmVplsPrev1hUnitType INTEGER,
pmVplsPrev1hIngressPkts Counter64,
pmVplsPrev1hIngressBytes Counter64,
pmVplsPrev1hEgressPkts Counter64,
pmVplsPrev1hEgressBytes Counter64,
pmVplsPrev1hStartTime DateAndTime,
pmVplsPrev1hStopTime DateAndTime
}
pmVplsPrev1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVplsPrev1hEntry 1 }
pmVplsPrev1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls name."
::= { pmVplsPrev1hEntry 2 }
pmVplsPrev1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVplsPrev1hEntry 3 }
pmVplsPrev1hIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpls ingress packets."
::= { pmVplsPrev1hEntry 4 }
pmVplsPrev1hIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpls ingress bytes."
::= { pmVplsPrev1hEntry 5 }
pmVplsPrev1hEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpls egress packets."
::= { pmVplsPrev1hEntry 6 }
pmVplsPrev1hEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour counter of vpls egress bytes."
::= { pmVplsPrev1hEntry 7 }
pmVplsPrev1hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour start time."
::= { pmVplsPrev1hEntry 100 }
pmVplsPrev1hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1hour stop time."
::= { pmVplsPrev1hEntry 101 }
pmVplsCurr1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVplsCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 5 }
pmVplsCurr1dEntry OBJECT-TYPE
SYNTAX PMVplsCurr1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmVplsCurr1dIndex }
::= { pmVplsCurr1dTable 1 }
PMVplsCurr1dEntry ::=
SEQUENCE
{
pmVplsCurr1dIndex Integer32,
pmVplsCurr1dId OCTET STRING,
pmVplsCurr1dUnitType INTEGER,
pmVplsCurr1dIngressPkts Counter64,
pmVplsCurr1dIngressBytes Counter64,
pmVplsCurr1dEgressPkts Counter64,
pmVplsCurr1dEgressBytes Counter64,
pmVplsCurr1dStartTime DateAndTime,
pmVplsCurr1dStopTime DateAndTime
}
pmVplsCurr1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVplsCurr1dEntry 1 }
pmVplsCurr1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls name."
::= { pmVplsCurr1dEntry 2 }
pmVplsCurr1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVplsCurr1dEntry 3 }
pmVplsCurr1dIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpls ingress packets."
::= { pmVplsCurr1dEntry 4 }
pmVplsCurr1dIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpls ingress bytes."
::= { pmVplsCurr1dEntry 5 }
pmVplsCurr1dEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpls egress packets."
::= { pmVplsCurr1dEntry 6 }
pmVplsCurr1dEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day counter of vpls egress bytes."
::= { pmVplsCurr1dEntry 7 }
pmVplsCurr1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day start time."
::= { pmVplsCurr1dEntry 100 }
pmVplsCurr1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current 1day stop time."
::= { pmVplsCurr1dEntry 101 }
pmVplsPrev1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMVplsPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 6 }
pmVplsPrev1dEntry OBJECT-TYPE
SYNTAX PMVplsPrev1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmVplsPrev1dIndex }
::= { pmVplsPrev1dTable 1 }
PMVplsPrev1dEntry ::=
SEQUENCE
{
pmVplsPrev1dIndex Integer32,
pmVplsPrev1dId OCTET STRING,
pmVplsPrev1dUnitType INTEGER,
pmVplsPrev1dIngressPkts Counter64,
pmVplsPrev1dIngressBytes Counter64,
pmVplsPrev1dEgressPkts Counter64,
pmVplsPrev1dEgressBytes Counter64,
pmVplsPrev1dStartTime DateAndTime,
pmVplsPrev1dStopTime DateAndTime
}
pmVplsPrev1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmVplsPrev1dEntry 1 }
pmVplsPrev1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vpls name."
::= { pmVplsPrev1dEntry 2 }
pmVplsPrev1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmVplsPrev1dEntry 3 }
pmVplsPrev1dIngressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpls ingress packets."
::= { pmVplsPrev1dEntry 4 }
pmVplsPrev1dIngressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpls ingress bytes."
::= { pmVplsPrev1dEntry 5 }
pmVplsPrev1dEgressPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpls egress packets."
::= { pmVplsPrev1dEntry 6 }
pmVplsPrev1dEgressBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day counter of vpls egress bytes."
::= { pmVplsPrev1dEntry 7 }
pmVplsPrev1dStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day start time."
::= { pmVplsPrev1dEntry 100 }
pmVplsPrev1dStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Previous 1day stop time."
::= { pmVplsPrev1dEntry 101 }
pmTcaVplsIngressPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsIngressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 7 }
pmTcaVplsIngressPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaVplsIngressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsIngressPkts15mIndex }
::= { pmTcaVplsIngressPkts15mTable 1 }
PMTcaVplsIngressPkts15mEntry ::=
SEQUENCE
{
pmTcaVplsIngressPkts15mIndex Integer32,
pmTcaVplsIngressPkts15mId OCTET STRING,
pmTcaVplsIngressPkts15mUnitType INTEGER,
pmTcaVplsIngressPkts15mCnt Counter64,
pmTcaVplsIngressPkts15mThreshold Counter64,
pmTcaVplsIngressPkts15mOccurTime DateAndTime
}
pmTcaVplsIngressPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsIngressPkts15mEntry 1 }
pmTcaVplsIngressPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsIngressPkts15mEntry 2 }
pmTcaVplsIngressPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsIngressPkts15mEntry 3 }
pmTcaVplsIngressPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpls ingress packets."
::= { pmTcaVplsIngressPkts15mEntry 4 }
pmTcaVplsIngressPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpls ingress packets."
::= { pmTcaVplsIngressPkts15mEntry 5 }
pmTcaVplsIngressPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsIngressPkts15mEntry 6 }
pmTcaVplsIngressPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsIngressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 8 }
pmTcaVplsIngressPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaVplsIngressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsIngressPkts1hIndex }
::= { pmTcaVplsIngressPkts1hTable 1 }
PMTcaVplsIngressPkts1hEntry ::=
SEQUENCE
{
pmTcaVplsIngressPkts1hIndex Integer32,
pmTcaVplsIngressPkts1hId OCTET STRING,
pmTcaVplsIngressPkts1hUnitType INTEGER,
pmTcaVplsIngressPkts1hCnt Counter64,
pmTcaVplsIngressPkts1hThreshold Counter64,
pmTcaVplsIngressPkts1hOccurTime DateAndTime
}
pmTcaVplsIngressPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsIngressPkts1hEntry 1 }
pmTcaVplsIngressPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsIngressPkts1hEntry 2 }
pmTcaVplsIngressPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsIngressPkts1hEntry 3 }
pmTcaVplsIngressPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpls ingress packets."
::= { pmTcaVplsIngressPkts1hEntry 4 }
pmTcaVplsIngressPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpls ingress packets."
::= { pmTcaVplsIngressPkts1hEntry 5 }
pmTcaVplsIngressPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsIngressPkts1hEntry 6 }
pmTcaVplsIngressPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsIngressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 9 }
pmTcaVplsIngressPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaVplsIngressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsIngressPkts1dIndex }
::= { pmTcaVplsIngressPkts1dTable 1 }
PMTcaVplsIngressPkts1dEntry ::=
SEQUENCE
{
pmTcaVplsIngressPkts1dIndex Integer32,
pmTcaVplsIngressPkts1dId OCTET STRING,
pmTcaVplsIngressPkts1dUnitType INTEGER,
pmTcaVplsIngressPkts1dCnt Counter64,
pmTcaVplsIngressPkts1dThreshold Counter64,
pmTcaVplsIngressPkts1dOccurTime DateAndTime
}
pmTcaVplsIngressPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsIngressPkts1dEntry 1 }
pmTcaVplsIngressPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsIngressPkts1dEntry 2 }
pmTcaVplsIngressPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsIngressPkts1dEntry 3 }
pmTcaVplsIngressPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpls ingress packets."
::= { pmTcaVplsIngressPkts1dEntry 4 }
pmTcaVplsIngressPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpls ingress packets."
::= { pmTcaVplsIngressPkts1dEntry 5 }
pmTcaVplsIngressPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsIngressPkts1dEntry 6 }
pmTcaVplsIngressBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsIngressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 10 }
pmTcaVplsIngressBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaVplsIngressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsIngressBytes15mIndex }
::= { pmTcaVplsIngressBytes15mTable 1 }
PMTcaVplsIngressBytes15mEntry ::=
SEQUENCE
{
pmTcaVplsIngressBytes15mIndex Integer32,
pmTcaVplsIngressBytes15mId OCTET STRING,
pmTcaVplsIngressBytes15mUnitType INTEGER,
pmTcaVplsIngressBytes15mCnt Counter64,
pmTcaVplsIngressBytes15mThreshold Counter64,
pmTcaVplsIngressBytes15mOccurTime DateAndTime
}
pmTcaVplsIngressBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsIngressBytes15mEntry 1 }
pmTcaVplsIngressBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsIngressBytes15mEntry 2 }
pmTcaVplsIngressBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsIngressBytes15mEntry 3 }
pmTcaVplsIngressBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpls ingress bytes."
::= { pmTcaVplsIngressBytes15mEntry 4 }
pmTcaVplsIngressBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpls ingress bytes."
::= { pmTcaVplsIngressBytes15mEntry 5 }
pmTcaVplsIngressBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsIngressBytes15mEntry 6 }
pmTcaVplsIngressBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsIngressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 11 }
pmTcaVplsIngressBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaVplsIngressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsIngressBytes1hIndex }
::= { pmTcaVplsIngressBytes1hTable 1 }
PMTcaVplsIngressBytes1hEntry ::=
SEQUENCE
{
pmTcaVplsIngressBytes1hIndex Integer32,
pmTcaVplsIngressBytes1hId OCTET STRING,
pmTcaVplsIngressBytes1hUnitType INTEGER,
pmTcaVplsIngressBytes1hCnt Counter64,
pmTcaVplsIngressBytes1hThreshold Counter64,
pmTcaVplsIngressBytes1hOccurTime DateAndTime
}
pmTcaVplsIngressBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsIngressBytes1hEntry 1 }
pmTcaVplsIngressBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsIngressBytes1hEntry 2 }
pmTcaVplsIngressBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsIngressBytes1hEntry 3 }
pmTcaVplsIngressBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpls ingress bytes."
::= { pmTcaVplsIngressBytes1hEntry 4 }
pmTcaVplsIngressBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpls ingress bytes."
::= { pmTcaVplsIngressBytes1hEntry 5 }
pmTcaVplsIngressBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsIngressBytes1hEntry 6 }
pmTcaVplsIngressBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsIngressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 12 }
pmTcaVplsIngressBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaVplsIngressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsIngressBytes1dIndex }
::= { pmTcaVplsIngressBytes1dTable 1 }
PMTcaVplsIngressBytes1dEntry ::=
SEQUENCE
{
pmTcaVplsIngressBytes1dIndex Integer32,
pmTcaVplsIngressBytes1dId OCTET STRING,
pmTcaVplsIngressBytes1dUnitType INTEGER,
pmTcaVplsIngressBytes1dCnt Counter64,
pmTcaVplsIngressBytes1dThreshold Counter64,
pmTcaVplsIngressBytes1dOccurTime DateAndTime
}
pmTcaVplsIngressBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsIngressBytes1dEntry 1 }
pmTcaVplsIngressBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsIngressBytes1dEntry 2 }
pmTcaVplsIngressBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsIngressBytes1dEntry 3 }
pmTcaVplsIngressBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpls ingress bytes."
::= { pmTcaVplsIngressBytes1dEntry 4 }
pmTcaVplsIngressBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpls ingress bytes."
::= { pmTcaVplsIngressBytes1dEntry 5 }
pmTcaVplsIngressBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsIngressBytes1dEntry 6 }
pmTcaVplsEgressPkts15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsEgressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 13 }
pmTcaVplsEgressPkts15mEntry OBJECT-TYPE
SYNTAX PMTcaVplsEgressPkts15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsEgressPkts15mIndex }
::= { pmTcaVplsEgressPkts15mTable 1 }
PMTcaVplsEgressPkts15mEntry ::=
SEQUENCE
{
pmTcaVplsEgressPkts15mIndex Integer32,
pmTcaVplsEgressPkts15mId OCTET STRING,
pmTcaVplsEgressPkts15mUnitType INTEGER,
pmTcaVplsEgressPkts15mCnt Counter64,
pmTcaVplsEgressPkts15mThreshold Counter64,
pmTcaVplsEgressPkts15mOccurTime DateAndTime
}
pmTcaVplsEgressPkts15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsEgressPkts15mEntry 1 }
pmTcaVplsEgressPkts15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsEgressPkts15mEntry 2 }
pmTcaVplsEgressPkts15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsEgressPkts15mEntry 3 }
pmTcaVplsEgressPkts15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpls egress packets."
::= { pmTcaVplsEgressPkts15mEntry 4 }
pmTcaVplsEgressPkts15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpls egress packets."
::= { pmTcaVplsEgressPkts15mEntry 5 }
pmTcaVplsEgressPkts15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsEgressPkts15mEntry 6 }
pmTcaVplsEgressPkts1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsEgressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 14 }
pmTcaVplsEgressPkts1hEntry OBJECT-TYPE
SYNTAX PMTcaVplsEgressPkts1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsEgressPkts1hIndex }
::= { pmTcaVplsEgressPkts1hTable 1 }
PMTcaVplsEgressPkts1hEntry ::=
SEQUENCE
{
pmTcaVplsEgressPkts1hIndex Integer32,
pmTcaVplsEgressPkts1hId OCTET STRING,
pmTcaVplsEgressPkts1hUnitType INTEGER,
pmTcaVplsEgressPkts1hCnt Counter64,
pmTcaVplsEgressPkts1hThreshold Counter64,
pmTcaVplsEgressPkts1hOccurTime DateAndTime
}
pmTcaVplsEgressPkts1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsEgressPkts1hEntry 1 }
pmTcaVplsEgressPkts1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsEgressPkts1hEntry 2 }
pmTcaVplsEgressPkts1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsEgressPkts1hEntry 3 }
pmTcaVplsEgressPkts1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpls egress packets."
::= { pmTcaVplsEgressPkts1hEntry 4 }
pmTcaVplsEgressPkts1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpls egress packets."
::= { pmTcaVplsEgressPkts1hEntry 5 }
pmTcaVplsEgressPkts1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsEgressPkts1hEntry 6 }
pmTcaVplsEgressPkts1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsEgressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 15 }
pmTcaVplsEgressPkts1dEntry OBJECT-TYPE
SYNTAX PMTcaVplsEgressPkts1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsEgressPkts1dIndex }
::= { pmTcaVplsEgressPkts1dTable 1 }
PMTcaVplsEgressPkts1dEntry ::=
SEQUENCE
{
pmTcaVplsEgressPkts1dIndex Integer32,
pmTcaVplsEgressPkts1dId OCTET STRING,
pmTcaVplsEgressPkts1dUnitType INTEGER,
pmTcaVplsEgressPkts1dCnt Counter64,
pmTcaVplsEgressPkts1dThreshold Counter64,
pmTcaVplsEgressPkts1dOccurTime DateAndTime
}
pmTcaVplsEgressPkts1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsEgressPkts1dEntry 1 }
pmTcaVplsEgressPkts1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsEgressPkts1dEntry 2 }
pmTcaVplsEgressPkts1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsEgressPkts1dEntry 3 }
pmTcaVplsEgressPkts1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpls egress packets."
::= { pmTcaVplsEgressPkts1dEntry 4 }
pmTcaVplsEgressPkts1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpls egress packets."
::= { pmTcaVplsEgressPkts1dEntry 5 }
pmTcaVplsEgressPkts1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsEgressPkts1dEntry 6 }
pmTcaVplsEgressBytes15mTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsEgressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 16 }
pmTcaVplsEgressBytes15mEntry OBJECT-TYPE
SYNTAX PMTcaVplsEgressBytes15mEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsEgressBytes15mIndex }
::= { pmTcaVplsEgressBytes15mTable 1 }
PMTcaVplsEgressBytes15mEntry ::=
SEQUENCE
{
pmTcaVplsEgressBytes15mIndex Integer32,
pmTcaVplsEgressBytes15mId OCTET STRING,
pmTcaVplsEgressBytes15mUnitType INTEGER,
pmTcaVplsEgressBytes15mCnt Counter64,
pmTcaVplsEgressBytes15mThreshold Counter64,
pmTcaVplsEgressBytes15mOccurTime DateAndTime
}
pmTcaVplsEgressBytes15mIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsEgressBytes15mEntry 1 }
pmTcaVplsEgressBytes15mId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsEgressBytes15mEntry 2 }
pmTcaVplsEgressBytes15mUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsEgressBytes15mEntry 3 }
pmTcaVplsEgressBytes15mCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min counter of vpls egress bytes."
::= { pmTcaVplsEgressBytes15mEntry 4 }
pmTcaVplsEgressBytes15mThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"15min threshold of vpls egress bytes."
::= { pmTcaVplsEgressBytes15mEntry 5 }
pmTcaVplsEgressBytes15mOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsEgressBytes15mEntry 6 }
pmTcaVplsEgressBytes1hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsEgressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 17 }
pmTcaVplsEgressBytes1hEntry OBJECT-TYPE
SYNTAX PMTcaVplsEgressBytes1hEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsEgressBytes1hIndex }
::= { pmTcaVplsEgressBytes1hTable 1 }
PMTcaVplsEgressBytes1hEntry ::=
SEQUENCE
{
pmTcaVplsEgressBytes1hIndex Integer32,
pmTcaVplsEgressBytes1hId OCTET STRING,
pmTcaVplsEgressBytes1hUnitType INTEGER,
pmTcaVplsEgressBytes1hCnt Counter64,
pmTcaVplsEgressBytes1hThreshold Counter64,
pmTcaVplsEgressBytes1hOccurTime DateAndTime
}
pmTcaVplsEgressBytes1hIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsEgressBytes1hEntry 1 }
pmTcaVplsEgressBytes1hId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsEgressBytes1hEntry 2 }
pmTcaVplsEgressBytes1hUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsEgressBytes1hEntry 3 }
pmTcaVplsEgressBytes1hCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour counter of vpls egress bytes."
::= { pmTcaVplsEgressBytes1hEntry 4 }
pmTcaVplsEgressBytes1hThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1hour threshold of vpls egress bytes."
::= { pmTcaVplsEgressBytes1hEntry 5 }
pmTcaVplsEgressBytes1hOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsEgressBytes1hEntry 6 }
pmTcaVplsEgressBytes1dTable OBJECT-TYPE
SYNTAX SEQUENCE OF PMTcaVplsEgressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains vpls information of all units."
::= { pmVpls 18 }
pmTcaVplsEgressBytes1dEntry OBJECT-TYPE
SYNTAX PMTcaVplsEgressBytes1dEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of vpls information of all units."
INDEX { pmTcaVplsEgressBytes1dIndex }
::= { pmTcaVplsEgressBytes1dTable 1 }
PMTcaVplsEgressBytes1dEntry ::=
SEQUENCE
{
pmTcaVplsEgressBytes1dIndex Integer32,
pmTcaVplsEgressBytes1dId OCTET STRING,
pmTcaVplsEgressBytes1dUnitType INTEGER,
pmTcaVplsEgressBytes1dCnt Counter64,
pmTcaVplsEgressBytes1dThreshold Counter64,
pmTcaVplsEgressBytes1dOccurTime DateAndTime
}
pmTcaVplsEgressBytes1dIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of units."
::= { pmTcaVplsEgressBytes1dEntry 1 }
pmTcaVplsEgressBytes1dId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { pmTcaVplsEgressBytes1dEntry 2 }
pmTcaVplsEgressBytes1dUnitType OBJECT-TYPE
SYNTAX INTEGER
{
mcu(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit type."
::= { pmTcaVplsEgressBytes1dEntry 3 }
pmTcaVplsEgressBytes1dCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day counter of vpls egress bytes."
::= { pmTcaVplsEgressBytes1dEntry 4 }
pmTcaVplsEgressBytes1dThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1day threshold of vpls egress bytes."
::= { pmTcaVplsEgressBytes1dEntry 5 }
pmTcaVplsEgressBytes1dOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the tca."
::= { pmTcaVplsEgressBytes1dEntry 6 }
--alarm OBJECT IDENTIFIER ::= { OID 91 }
alarmOptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlarmOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains all alarm information."
::= { alarm 1 }
alarmOptionEntry OBJECT-TYPE
SYNTAX AlarmOptionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all alarm information."
INDEX { alarmOptionIndex }
::= { alarmOptionTable 1 }
AlarmOptionEntry ::=
SEQUENCE
{
alarmOptionIndex INTEGER,
alarmOptionSeverity INTEGER,
alarmOptionServiceAffect INTEGER
}
alarmOptionIndex OBJECT-TYPE
SYNTAX INTEGER
{
unit-out(0),
sfp-out(1),
link-down(2),
vpws-down(3),
vpls-down(4),
lsp-down(5),
mspw-down(6),
mem-usage-high(7),
mpls-tp-oam-loc(8),
mpls-tp-oam-unexp-rmepid(9),
mpls-tp-oam-unexp-interval(10),
mpls-tp-oam-unexp-megid(11),
mpls-tp-oam-unexp-level(12),
mpls-tp-oam-rdi(13),
mpls-tp-oam-rdi-tx(14),
mpls-tp-oam-ais-defect(15),
mpls-tp-oam-event-full(16),
mpls-tp-oam-1dm-full(17),
mpls-tp-oam-wait-1st-ccm(18),
mpls-tp-oam-ais-rx(19),
mpls-tp-oam-ais-tx(20),
tca-unit-temperature-min-15min(21),
tca-unit-temperature-min-1hour(22),
tca-unit-temperature-min-1day(23),
tca-unit-temperature-max-15min(24),
tca-unit-temperature-max-1hour(25),
tca-unit-temperature-max-1day(26),
tca-sfp-rx-power-min-15min(27),
tca-sfp-rx-power-min-1hour(28),
tca-sfp-rx-power-min-1day(29),
tca-sfp-rx-power-max-15min(30),
tca-sfp-rx-power-max-1hour(31),
tca-sfp-rx-power-max-1day(32),
tca-sfp-tx-power-min-15min(33),
tca-sfp-tx-power-min-1hour(34),
tca-sfp-tx-power-min-1day(35),
tca-sfp-tx-power-max-15min(36),
tca-sfp-tx-power-max-1hourn(37),
tca-sfp-tx-power-max-1day(38),
tca-if-dropped-events-15min(39),
tca-if-dropped-events-1hour(40),
tca-if-dropped-events-1day(41),
tca-if-input-packets-15min(42),
tca-if-input-packets-1hour(43),
tca-if-input-packets-1day(44),
tca-if-input-bytes-15min(45),
tca-if-input-bytes-1hour(46),
tca-if-input-bytes-1day(47),
tca-if-input-broadcasts-15min(48),
tca-if-input-broadcasts-1hour(49),
tca-if-input-broadcasts-1day(50),
tca-if-input-multicasts-15min(51),
tca-if-input-multicasts-1hour(52),
tca-if-input-multicasts-1day(53),
tca-if-crc-errors-15min(54),
tca-if-crc-errors-1hour(55),
tca-if-crc-errors-1day(56),
tca-if-collisions-15min(57),
tca-if-collisions-1hour(58),
tca-if-collisions-1day(59),
tca-if-undersized-packets-15min(60),
tca-if-undersized-packets-1hour(61),
tca-if-undersized-packets-1day(62),
tca-if-oversized-packets-15min(63),
tca-if-oversized-packets-1hour(64),
tca-if-oversized-packets-1day(65),
tca-if-fragments-15min(66),
tca-if-fragments-1hour(67),
tca-if-fragments-1day(68),
tca-if-jabbers-15min(69),
tca-if-jabbers-1hour(70),
tca-if-jabbers-1day(71),
tca-if-packet-64-15min(72),
tca-if-packet-64-1hour(73),
tca-if-packet-64-1day(74),
tca-if-packet-65-127-15min(75),
tca-if-packet-65-127-1hour(76),
tca-if-packet-65-127-1day(77),
tca-if-packet-128-255-15min(78),
tca-if-packet-128-255-1hour(79),
tca-if-packet-128-255-1day(80),
tca-if-packet-256-511-15min(81),
tca-if-packet-256-511-1hour(82),
tca-if-packet-256-511-1day(83),
tca-if-packet-512-1023-15min(84),
tca-if-packet-512-1023-1hour(85),
tca-if-packet-512-1023-1day(86),
tca-if-packet-1024-15min(87),
tca-if-packet-1024-1hour(88),
tca-if-packet-1024-1day(89),
tca-if-output-packets-15min(90),
tca-if-output-packets-1hour(91),
tca-if-output-packets-1day(92),
tca-if-output-bytes-15min(93),
tca-if-output-bytes-1hour(94),
tca-if-output-bytes-1day(95),
tca-lsp-pe-out-packets-15min(96),
tca-lsp-pe-out-packets-1hour(97),
tca-lsp-pe-out-packets-1day(98),
tca-lsp-pe-out-bytes-15min(99),
tca-lsp-pe-out-bytes-1hour(100),
tca-lsp-pe-out-bytes-1day(101),
tca-lsp-p-east-in-packets-15min(102),
tca-lsp-p-east-in-packets-1hour(103),
tca-lsp-p-east-in-packets-1day(104),
tca-lsp-p-east-in-bytes-15min(105),
tca-lsp-p-east-in-bytes-1hour(106),
tca-lsp-p-east-in-bytes-1day(107),
tca-lsp-p-west-in-packets-15min(108),
tca-lsp-p-west-in-packets-1hour(109),
tca-lsp-p-west-in-packets-1day(110),
tca-lsp-p-west-in-bytes-15min(111),
tca-lsp-p-west-in-bytes-1hour(112),
tca-lsp-p-west-in-bytes-1day(113),
tca-vpws-ingress-packets-15min(114),
tca-vpws-ingress-packets-1hour(115),
tca-vpws-ingress-packets-1day(116),
tca-vpws-ingress-bytes-15min(117),
tca-vpws-ingress-bytes-1hour(118),
tca-vpws-ingress-bytes-1day(119),
tca-vpws-egress-packets-15min(120),
tca-vpws-egress-packets-1hour(121),
tca-vpws-egress-packets-1day(122),
tca-vpws-egress-bytes-15min(123),
tca-vpws-egress-bytes-1hour(124),
tca-vpws-egress-bytes-1day(125),
tca-vpls-ingress-packets-15min(126),
tca-vpls-ingress-packets-1hour(127),
tca-vpls-ingress-packets-1day(128),
tca-vpls-ingress-bytes-15min(129),
tca-vpls-ingress-bytes-1hour(130),
tca-vpls-ingress-bytes-1day(131),
tca-vpls-egress-packets-15min(132),
tca-vpls-egress-packets-1hour(133),
tca-vpls-egress-packets-1day(134),
tca-vpls-egress-bytes-15min(135),
tca-vpls-egress-bytes-1hour(136),
tca-vpls-egress-bytes-1day(137)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of pm types."
::= { alarmOptionEntry 1 }
alarmOptionSeverity OBJECT-TYPE
SYNTAX INTEGER
{
warning(0),
minor(1),
major(2),
critical(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Severity of the alarm."
::= { alarmOptionEntry 2 }
alarmOptionServiceAffect OBJECT-TYPE
SYNTAX INTEGER
{
service-affected(0),
non-service-affected(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service affted of the alarm."
::= { alarmOptionEntry 3 }
alarmLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlarmLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains all current alarms."
::= { alarm 2 }
alarmLogEntry OBJECT-TYPE
SYNTAX AlarmLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { alarmLogIndex }
::= { alarmLogTable 1 }
AlarmLogEntry ::=
SEQUENCE
{
alarmLogIndex Integer32,
alarmLogType INTEGER,
alarmLogObject OCTET STRING,
alarmLogSeverity INTEGER,
alarmLogServiceAffect INTEGER,
alarmLogAddInfo OCTET STRING,
alarmLogOccurTime DateAndTime
}
alarmLogIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of current alarm."
::= { alarmLogEntry 1 }
alarmLogType OBJECT-TYPE
SYNTAX INTEGER
{
unit-out(0),
sfp-out(1),
link-down(2),
vpws-down(3),
vpls-down(4),
lsp-down(5),
mspw-down(6),
mem-usage-high(7),
mpls-tp-oam-loc(8),
mpls-tp-oam-unexp-rmepid(9),
mpls-tp-oam-unexp-interval(10),
mpls-tp-oam-unexp-megid(11),
mpls-tp-oam-unexp-level(12),
mpls-tp-oam-rdi(13),
mpls-tp-oam-rdi-tx(14),
mpls-tp-oam-ais-defect(15),
mpls-tp-oam-event-full(16),
mpls-tp-oam-1dm-full(17),
mpls-tp-oam-wait-1st-ccm(18),
mpls-tp-oam-ais-rx(19),
mpls-tp-oam-ais-tx(20),
tca-unit-temperature-min-15min(21),
tca-unit-temperature-min-1hour(22),
tca-unit-temperature-min-1day(23),
tca-unit-temperature-max-15min(24),
tca-unit-temperature-max-1hour(25),
tca-unit-temperature-max-1day(26),
tca-sfp-rx-power-min-15min(27),
tca-sfp-rx-power-min-1hour(28),
tca-sfp-rx-power-min-1day(29),
tca-sfp-rx-power-max-15min(30),
tca-sfp-rx-power-max-1hour(31),
tca-sfp-rx-power-max-1day(32),
tca-sfp-tx-power-min-15min(33),
tca-sfp-tx-power-min-1hour(34),
tca-sfp-tx-power-min-1day(35),
tca-sfp-tx-power-max-15min(36),
tca-sfp-tx-power-max-1hourn(37),
tca-sfp-tx-power-max-1day(38),
tca-if-dropped-events-15min(39),
tca-if-dropped-events-1hour(40),
tca-if-dropped-events-1day(41),
tca-if-input-packets-15min(42),
tca-if-input-packets-1hour(43),
tca-if-input-packets-1day(44),
tca-if-input-bytes-15min(45),
tca-if-input-bytes-1hour(46),
tca-if-input-bytes-1day(47),
tca-if-input-broadcasts-15min(48),
tca-if-input-broadcasts-1hour(49),
tca-if-input-broadcasts-1day(50),
tca-if-input-multicasts-15min(51),
tca-if-input-multicasts-1hour(52),
tca-if-input-multicasts-1day(53),
tca-if-crc-errors-15min(54),
tca-if-crc-errors-1hour(55),
tca-if-crc-errors-1day(56),
tca-if-collisions-15min(57),
tca-if-collisions-1hour(58),
tca-if-collisions-1day(59),
tca-if-undersized-packets-15min(60),
tca-if-undersized-packets-1hour(61),
tca-if-undersized-packets-1day(62),
tca-if-oversized-packets-15min(63),
tca-if-oversized-packets-1hour(64),
tca-if-oversized-packets-1day(65),
tca-if-fragments-15min(66),
tca-if-fragments-1hour(67),
tca-if-fragments-1day(68),
tca-if-jabbers-15min(69),
tca-if-jabbers-1hour(70),
tca-if-jabbers-1day(71),
tca-if-packet-64-15min(72),
tca-if-packet-64-1hour(73),
tca-if-packet-64-1day(74),
tca-if-packet-65-127-15min(75),
tca-if-packet-65-127-1hour(76),
tca-if-packet-65-127-1day(77),
tca-if-packet-128-255-15min(78),
tca-if-packet-128-255-1hour(79),
tca-if-packet-128-255-1day(80),
tca-if-packet-256-511-15min(81),
tca-if-packet-256-511-1hour(82),
tca-if-packet-256-511-1day(83),
tca-if-packet-512-1023-15min(84),
tca-if-packet-512-1023-1hour(85),
tca-if-packet-512-1023-1day(86),
tca-if-packet-1024-15min(87),
tca-if-packet-1024-1hour(88),
tca-if-packet-1024-1day(89),
tca-if-output-packets-15min(90),
tca-if-output-packets-1hour(91),
tca-if-output-packets-1day(92),
tca-if-output-bytes-15min(93),
tca-if-output-bytes-1hour(94),
tca-if-output-bytes-1day(95),
tca-lsp-pe-out-packets-15min(96),
tca-lsp-pe-out-packets-1hour(97),
tca-lsp-pe-out-packets-1day(98),
tca-lsp-pe-out-bytes-15min(99),
tca-lsp-pe-out-bytes-1hour(100),
tca-lsp-pe-out-bytes-1day(101),
tca-lsp-p-east-in-packets-15min(102),
tca-lsp-p-east-in-packets-1hour(103),
tca-lsp-p-east-in-packets-1day(104),
tca-lsp-p-east-in-bytes-15min(105),
tca-lsp-p-east-in-bytes-1hour(106),
tca-lsp-p-east-in-bytes-1day(107),
tca-lsp-p-west-in-packets-15min(108),
tca-lsp-p-west-in-packets-1hour(109),
tca-lsp-p-west-in-packets-1day(110),
tca-lsp-p-west-in-bytes-15min(111),
tca-lsp-p-west-in-bytes-1hour(112),
tca-lsp-p-west-in-bytes-1day(113),
tca-vpws-ingress-packets-15min(114),
tca-vpws-ingress-packets-1hour(115),
tca-vpws-ingress-packets-1day(116),
tca-vpws-ingress-bytes-15min(117),
tca-vpws-ingress-bytes-1hour(118),
tca-vpws-ingress-bytes-1day(119),
tca-vpws-egress-packets-15min(120),
tca-vpws-egress-packets-1hour(121),
tca-vpws-egress-packets-1day(122),
tca-vpws-egress-bytes-15min(123),
tca-vpws-egress-bytes-1hour(124),
tca-vpws-egress-bytes-1day(125),
tca-vpls-ingress-packets-15min(126),
tca-vpls-ingress-packets-1hour(127),
tca-vpls-ingress-packets-1day(128),
tca-vpls-ingress-bytes-15min(129),
tca-vpls-ingress-bytes-1hour(130),
tca-vpls-ingress-bytes-1day(131),
tca-vpls-egress-packets-15min(132),
tca-vpls-egress-packets-1hour(133),
tca-vpls-egress-packets-1day(134),
tca-vpls-egress-bytes-15min(135),
tca-vpls-egress-bytes-1hour(136),
tca-vpls-egress-bytes-1day(137)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { alarmLogEntry 2 }
alarmLogObject OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object of the alarm."
::= { alarmLogEntry 3 }
alarmLogSeverity OBJECT-TYPE
SYNTAX INTEGER
{
warning(0),
minor(1),
major(2),
critical(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severity of the alarm."
::= { alarmLogEntry 4 }
alarmLogServiceAffect OBJECT-TYPE
SYNTAX INTEGER
{
service-affected(0),
not-service-affected(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this alarm affects service."
::= { alarmLogEntry 5 }
alarmLogAddInfo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional information of the alarm."
::= { alarmLogEntry 6 }
alarmLogOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the alarm."
::= { alarmLogEntry 7 }
alarmHistoryLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlarmHistoryLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains all current alarms."
::= { alarm 3 }
alarmHistoryLogEntry OBJECT-TYPE
SYNTAX AlarmHistoryLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of temperature information of all units."
INDEX { alarmHistoryLogIndex }
::= { alarmHistoryLogTable 1 }
AlarmHistoryLogEntry ::=
SEQUENCE
{
alarmHistoryLogIndex Integer32,
alarmHistoryLogSeq Integer32,
alarmHistoryLogType INTEGER,
alarmHistoryLogObject OCTET STRING,
alarmHistoryLogSeverity INTEGER,
alarmHistoryLogServiceAffect INTEGER,
alarmHistoryLogAddInfo OCTET STRING,
alarmHistoryLogOccurTime DateAndTime,
alarmHistoryLogReleaseTime DateAndTime
}
alarmHistoryLogIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index of history alarms."
::= { alarmHistoryLogEntry 1 }
alarmHistoryLogSeq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sequence number of the history alarm."
::= { alarmHistoryLogEntry 2 }
alarmHistoryLogType OBJECT-TYPE
SYNTAX INTEGER
{
unit-out(0),
sfp-out(1),
link-down(2),
vpws-down(3),
vpls-down(4),
lsp-down(5),
mspw-down(6),
mem-usage-high(7),
mpls-tp-oam-loc(8),
mpls-tp-oam-unexp-rmepid(9),
mpls-tp-oam-unexp-interval(10),
mpls-tp-oam-unexp-megid(11),
mpls-tp-oam-unexp-level(12),
mpls-tp-oam-rdi(13),
mpls-tp-oam-rdi-tx(14),
mpls-tp-oam-ais-defect(15),
mpls-tp-oam-event-full(16),
mpls-tp-oam-1dm-full(17),
mpls-tp-oam-wait-1st-ccm(18),
mpls-tp-oam-ais-rx(19),
mpls-tp-oam-ais-tx(20),
tca-unit-temperature-min-15min(21),
tca-unit-temperature-min-1hour(22),
tca-unit-temperature-min-1day(23),
tca-unit-temperature-max-15min(24),
tca-unit-temperature-max-1hour(25),
tca-unit-temperature-max-1day(26),
tca-sfp-rx-power-min-15min(27),
tca-sfp-rx-power-min-1hour(28),
tca-sfp-rx-power-min-1day(29),
tca-sfp-rx-power-max-15min(30),
tca-sfp-rx-power-max-1hour(31),
tca-sfp-rx-power-max-1day(32),
tca-sfp-tx-power-min-15min(33),
tca-sfp-tx-power-min-1hour(34),
tca-sfp-tx-power-min-1day(35),
tca-sfp-tx-power-max-15min(36),
tca-sfp-tx-power-max-1hourn(37),
tca-sfp-tx-power-max-1day(38),
tca-if-dropped-events-15min(39),
tca-if-dropped-events-1hour(40),
tca-if-dropped-events-1day(41),
tca-if-input-packets-15min(42),
tca-if-input-packets-1hour(43),
tca-if-input-packets-1day(44),
tca-if-input-bytes-15min(45),
tca-if-input-bytes-1hour(46),
tca-if-input-bytes-1day(47),
tca-if-input-broadcasts-15min(48),
tca-if-input-broadcasts-1hour(49),
tca-if-input-broadcasts-1day(50),
tca-if-input-multicasts-15min(51),
tca-if-input-multicasts-1hour(52),
tca-if-input-multicasts-1day(53),
tca-if-crc-errors-15min(54),
tca-if-crc-errors-1hour(55),
tca-if-crc-errors-1day(56),
tca-if-collisions-15min(57),
tca-if-collisions-1hour(58),
tca-if-collisions-1day(59),
tca-if-undersized-packets-15min(60),
tca-if-undersized-packets-1hour(61),
tca-if-undersized-packets-1day(62),
tca-if-oversized-packets-15min(63),
tca-if-oversized-packets-1hour(64),
tca-if-oversized-packets-1day(65),
tca-if-fragments-15min(66),
tca-if-fragments-1hour(67),
tca-if-fragments-1day(68),
tca-if-jabbers-15min(69),
tca-if-jabbers-1hour(70),
tca-if-jabbers-1day(71),
tca-if-packet-64-15min(72),
tca-if-packet-64-1hour(73),
tca-if-packet-64-1day(74),
tca-if-packet-65-127-15min(75),
tca-if-packet-65-127-1hour(76),
tca-if-packet-65-127-1day(77),
tca-if-packet-128-255-15min(78),
tca-if-packet-128-255-1hour(79),
tca-if-packet-128-255-1day(80),
tca-if-packet-256-511-15min(81),
tca-if-packet-256-511-1hour(82),
tca-if-packet-256-511-1day(83),
tca-if-packet-512-1023-15min(84),
tca-if-packet-512-1023-1hour(85),
tca-if-packet-512-1023-1day(86),
tca-if-packet-1024-15min(87),
tca-if-packet-1024-1hour(88),
tca-if-packet-1024-1day(89),
tca-if-output-packets-15min(90),
tca-if-output-packets-1hour(91),
tca-if-output-packets-1day(92),
tca-if-output-bytes-15min(93),
tca-if-output-bytes-1hour(94),
tca-if-output-bytes-1day(95),
tca-lsp-pe-out-packets-15min(96),
tca-lsp-pe-out-packets-1hour(97),
tca-lsp-pe-out-packets-1day(98),
tca-lsp-pe-out-bytes-15min(99),
tca-lsp-pe-out-bytes-1hour(100),
tca-lsp-pe-out-bytes-1day(101),
tca-lsp-p-east-in-packets-15min(102),
tca-lsp-p-east-in-packets-1hour(103),
tca-lsp-p-east-in-packets-1day(104),
tca-lsp-p-east-in-bytes-15min(105),
tca-lsp-p-east-in-bytes-1hour(106),
tca-lsp-p-east-in-bytes-1day(107),
tca-lsp-p-west-in-packets-15min(108),
tca-lsp-p-west-in-packets-1hour(109),
tca-lsp-p-west-in-packets-1day(110),
tca-lsp-p-west-in-bytes-15min(111),
tca-lsp-p-west-in-bytes-1hour(112),
tca-lsp-p-west-in-bytes-1day(113),
tca-vpws-ingress-packets-15min(114),
tca-vpws-ingress-packets-1hour(115),
tca-vpws-ingress-packets-1day(116),
tca-vpws-ingress-bytes-15min(117),
tca-vpws-ingress-bytes-1hour(118),
tca-vpws-ingress-bytes-1day(119),
tca-vpws-egress-packets-15min(120),
tca-vpws-egress-packets-1hour(121),
tca-vpws-egress-packets-1day(122),
tca-vpws-egress-bytes-15min(123),
tca-vpws-egress-bytes-1hour(124),
tca-vpws-egress-bytes-1day(125),
tca-vpls-ingress-packets-15min(126),
tca-vpls-ingress-packets-1hour(127),
tca-vpls-ingress-packets-1day(128),
tca-vpls-ingress-bytes-15min(129),
tca-vpls-ingress-bytes-1hour(130),
tca-vpls-ingress-bytes-1day(131),
tca-vpls-egress-packets-15min(132),
tca-vpls-egress-packets-1hour(133),
tca-vpls-egress-packets-1day(134),
tca-vpls-egress-bytes-15min(135),
tca-vpls-egress-bytes-1hour(136),
tca-vpls-egress-bytes-1day(137)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unit name."
::= { alarmHistoryLogEntry 3 }
alarmHistoryLogObject OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object of the alarm."
::= { alarmHistoryLogEntry 4 }
alarmHistoryLogSeverity OBJECT-TYPE
SYNTAX INTEGER
{
warning(0),
minor(1),
major(2),
critical(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severity of the alarm."
::= { alarmHistoryLogEntry 5 }
alarmHistoryLogServiceAffect OBJECT-TYPE
SYNTAX INTEGER
{
service-affected(0),
not-service-affected(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this alarm affects service."
::= { alarmHistoryLogEntry 6 }
alarmHistoryLogAddInfo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional information of the alarm."
::= { alarmHistoryLogEntry 7 }
alarmHistoryLogOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the alarm."
::= { alarmHistoryLogEntry 8 }
alarmHistoryLogReleaseTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the occurrence of the alarm."
::= { alarmHistoryLogEntry 9 }
alarmSwitchAlarm OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable all alarm event traps.disable(2) enable(1)"
DEFVAL { enable }
::= { alarm 4 }
alarmSwitchTca OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable all tca event traps.disable(2) enable(1)"
DEFVAL { enable }
::= { alarm 5 }
alarmTrap OBJECT IDENTIFIER ::= { alarm 100 }
aAlarmEventNotify NOTIFICATION-TYPE
OBJECTS {
alarmHistoryLogSeq,
alarmHistoryLogType,
alarmHistoryLogObject,
alarmHistoryLogSeverity,
alarmHistoryLogServiceAffect,
alarmHistoryLogAddInfo,
alarmHistoryLogOccurTime,
alarmHistoryLogReleaseTime
}
STATUS current
DESCRIPTION
"This trap will be generated when system fault is detected or released.
ie. unit-out, tca, etc."
::= {alarmTrap 1}
-- Sub Module: rsvpTe
-- rsvpTe: inteface
rsvpTeIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure mpls-te on an interface."
::= { rsvpTe 1 }
rsvpTeIfEntry OBJECT-TYPE
SYNTAX RsvpTeIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvpTeIfTable."
INDEX { ifIndex }
::= { rsvpTeIfTable 1 }
RsvpTeIfEntry ::=
SEQUENCE
{
rsvpTeIfEnable
INTEGER,
rsvpTeIfHelloInterval
Integer32,
rsvpTeIfHelloReceipt
INTEGER,
rsvpTeIfHelloTimeout
Integer32,
rsvpTeIfKeepMultiplier
Integer32,
rsvpTeIfRefreshTime
Integer32,
rsvpTeAckWaitTime
Integer32,
rsvpTeMessageAck
INTEGER,
rsvpTeRefreshReduction
INTEGER
}
rsvpTeIfEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RSVP on this interface"
DEFVAL { disable }
::= { rsvpTeIfEntry 1 }
rsvpTeIfHelloInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure interval between successive Hello packets to neighbor on this interface"
DEFVAL { 2 }
::= { rsvpTeIfEntry 2 }
rsvpTeIfHelloReceipt OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the exchange of Hello messages on this interface"
DEFVAL { disable }
::= { rsvpTeIfEntry 3 }
rsvpTeIfHelloTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure Timeout for clearing up all sessions shared with a neighbor on this interface"
DEFVAL { 7 }
::= { rsvpTeIfEntry 4 }
rsvpTeIfKeepMultiplier OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure the constant to be used for calculating a valid lifetime on this interface"
DEFVAL { 3 }
::= { rsvpTeIfEntry 5 }
rsvpTeIfRefreshTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configure the path interval being used on this interface"
DEFVAL { 30 }
::= { rsvpTeIfEntry 6 }
rsvpTeAckWaitTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure acknowledgement wait timeout on this interface"
DEFVAL { 1 }
::= { rsvpTeIfEntry 7 }
rsvpTeMessageAck OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Message Acknowledgement on this interface"
DEFVAL { disable }
::= { rsvpTeIfEntry 8 }
rsvpTeRefreshReduction OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable refresh reduction for this interface"
DEFVAL { enable }
::= { rsvpTeIfEntry 9 }
-- rsvpTe: router rsvp
rsvpTeGlobal OBJECT IDENTIFIER
::= { rsvpTe 2 }
rsvpTeGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the Resource Reservation Protocol (RSVP) Globally."
DEFVAL { disable }
::= { rsvpTeGlobal 1}
rsvpTeGlobalExplicitNull OBJECT-TYPE
SYNTAX INTEGER {explicitNull(1), noExplicitNull(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the state of send Explicit NULL Label"
DEFVAL { noExplicitNull }
::= { rsvpTeGlobal 2 }
rsvpTeGlobalHelloInterval OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the interval between successive Hello packets to neighbor"
DEFVAL { 2 }
::= { rsvpTeGlobal 3 }
rsvpTeGlobalHelloTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the timeout for clearing up all sessions shared with a neighbor"
DEFVAL { 7 }
::= { rsvpTeGlobal 4 }
rsvpTeGlobalKeepMultiplier OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the constant to be used for calculating a valid lifetime"
DEFVAL { 3 }
::= { rsvpTeGlobal 5 }
rsvpTeGlobalNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeGlobalNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identify a directly connected ipv4 neighbor"
::= { rsvpTeGlobal 6 }
rsvpTeGlobalNeighborEntry OBJECT-TYPE
SYNTAX RsvpTeGlobalNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvpTeGlobalNeighborTable"
INDEX { rsvpTeGlobalNeighborAddr }
::= { rsvpTeGlobalNeighborTable 1 }
RsvpTeGlobalNeighborEntry ::=
SEQUENCE
{
rsvpTeGlobalNeighborAddr
IpAddress,
rsvpTeGlobalNeighborRowStatus
RowStatus,
rsvpTeGlobalNeighborUpStrmLSP
Integer32,
rsvpTeGlobalNeighborDnStrmLSP
Integer32,
rsvpTeGlobalNeighborRefReduc
INTEGER,
rsvpTeGlobalNeighborSrefreshIn
Integer32,
rsvpTeGlobalNeighborSrefreshType
INTEGER,
rsvpTeGlobalNeighborHelloStat
INTEGER
}
rsvpTeGlobalNeighborAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the IPv4 address of the neighbor"
::= { rsvpTeGlobalNeighborEntry 1 }
rsvpTeGlobalNeighborRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the rsvpTeGlobalNeighborEntry row.
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { rsvpTeGlobalNeighborEntry 2 }
rsvpTeGlobalNeighborUpStrmLSP OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the up stream LSP."
::= { rsvpTeGlobalNeighborEntry 3 }
rsvpTeGlobalNeighborDnStrmLSP OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the down stream LSP."
::= { rsvpTeGlobalNeighborEntry 4 }
rsvpTeGlobalNeighborRefReduc OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RR(Refresh Reduction) configuration of the rsvp neighbor."
::= { rsvpTeGlobalNeighborEntry 5 }
rsvpTeGlobalNeighborSrefreshIn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The refresh timer of the rsvp neighbor."
::= { rsvpTeGlobalNeighborEntry 6 }
rsvpTeGlobalNeighborSrefreshType OBJECT-TYPE
SYNTAX INTEGER {explicit(1), implicit(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The refresh type of the rsvp neighbor."
::= { rsvpTeGlobalNeighborEntry 7 }
rsvpTeGlobalNeighborHelloStat OBJECT-TYPE
SYNTAX INTEGER {up(1), lost(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of hello keep-alive message."
::= { rsvpTeGlobalNeighborEntry 8 }
rsvpTeGlobalLoopDetection OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the loop detection"
DEFVAL { disable }
::= { rsvpTeGlobal 7 }
rsvpTeGlobalRefreshTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure RSVP refresh interval timer"
DEFVAL { 30 }
::= { rsvpTeGlobal 8 }
rsvpTeGlobalReoptimizeTime OBJECT-TYPE
SYNTAX Integer32 (0..655535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the Reoptimize timer"
DEFVAL { 3600 }
::= { rsvpTeGlobal 9 }
rsvpTeGlobalVersion OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Protocal version of rsvp."
::= { rsvpTeGlobal 10 }
rsvpTeGlobalProcessUpTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process up time of rsvp."
::= { rsvpTeGlobal 11 }
-- rsvpTe: rsvp trunk
rsvpTeTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of rsvp trunk."
::= { rsvpTe 3 }
rsvpTeTrunkEntry OBJECT-TYPE
SYNTAX RsvpTeTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of rsvpTeTrunkTable"
INDEX { rsvpTeTrunkName }
::= { rsvpTeTrunkTable 1 }
RsvpTeTrunkEntry ::=
SEQUENCE
{
rsvpTeTrunkName
OCTET STRING,
rsvpTeTrunkRowStatus
RowStatus,
rsvpTeTrunkExtTunnelId
IpAddress,
rsvpTeTrunkPrimaryFilter
INTEGER,
rsvpTeTrunkSecondaryFilter
INTEGER,
rsvpTeTrunkSource
IpAddress,
rsvpTeTrunkPrimaryHoldPriority
Integer32,
rsvpTeTrunkSecondaryHoldPriority
Integer32,
rsvpTeTrunkPrimaryHopLimit
Integer32,
rsvpTeTrunkSecondaryHopLimit
Integer32,
rsvpTeTrunkPrimaryCspf
INTEGER,
rsvpTeTrunkSecondaryCspf
INTEGER,
rsvpTeTrunkLspMetricType
Integer32,
rsvpTeTrunkLspMetricValue
Integer32,
rsvpTeTrunkPrimaryRecord
INTEGER,
rsvpTeTrunkSecondaryRecord
INTEGER,
rsvpTeTrunkPrimaryPathName
OCTET STRING,
rsvpTeTrunkSecondaryPathName
OCTET STRING,
rsvpTeTrunkPrimaryRetryTimer
Integer32,
rsvpTeTrunkSecondaryRetryTimer
Integer32,
rsvpTeTrunkPrimarySetupPriority
Integer32,
rsvpTeTrunkSecondarySetupPriority
Integer32,
rsvpTeTrunkdestination
IpAddress,
rsvpTeTrunkLSPCount
Integer32
}
rsvpTeTrunkName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the RSVP trunk"
::= { rsvpTeTrunkEntry 1 }
rsvpTeTrunkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the rsvpTeTrunkEntry row
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { rsvpTeTrunkEntry 2 }
rsvpTeTrunkExtTunnelId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify an extended tunnel identifier for this trunk."
::= { rsvpTeTrunkEntry 3 }
rsvpTeTrunkPrimaryFilter OBJECT-TYPE
SYNTAX INTEGER {fixed(1), shared-explicit(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a filter to be used for this LSP."
DEFVAL { shared-explicit }
::= { rsvpTeTrunkEntry 4 }
rsvpTeTrunkSecondaryFilter OBJECT-TYPE
SYNTAX INTEGER {fixed(1), shared-explicit(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a filter to be used for this LSP."
::= { rsvpTeTrunkEntry 5 }
rsvpTeTrunkSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the IPv4 tunnel ingress."
::= { rsvpTeTrunkEntry 6 }
rsvpTeTrunkPrimaryHoldPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a hold priority for this LSP."
DEFVAL { 0 }
::= { rsvpTeTrunkEntry 7 }
rsvpTeTrunkSecondaryHoldPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a hold priority for this LSP."
::= { rsvpTeTrunkEntry 8 }
rsvpTeTrunkPrimaryHopLimit OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a hop limit for this LSP."
DEFVAL { 65 }
::= { rsvpTeTrunkEntry 9 }
rsvpTeTrunkSecondaryHopLimit OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a hop limit for this LSP."
DEFVAL { 65 }
::= { rsvpTeTrunkEntry 10 }
rsvpTeTrunkPrimaryCspf OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use CSPF for ERO calculation."
DEFVAL { disable }
::= { rsvpTeTrunkEntry 11 }
rsvpTeTrunkSecondaryCspf OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use CSPF for ERO calculation."
DEFVAL { disable }
::= { rsvpTeTrunkEntry 12 }
rsvpTeTrunkPrimaryRecord OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Record route taken by PATH message in order to reach tunnel egress."
DEFVAL { disable }
::= { rsvpTeTrunkEntry 13 }
rsvpTeTrunkSecondaryRecord OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Record route taken by PATH message in order to reach tunnel egress."
DEFVAL { disable }
::= { rsvpTeTrunkEntry 14 }
rsvpTeTrunkPrimaryPathName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify an RSVP Path to be used."
::= { rsvpTeTrunkEntry 15 }
rsvpTeTrunkSecondaryPathName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify an RSVP Path to be used."
::= { rsvpTeTrunkEntry 16 }
rsvpTeTrunkPrimaryRetryTimer OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a retry interval for this LSP."
DEFVAL { 30 }
::= { rsvpTeTrunkEntry 17 }
rsvpTeTrunkSecondaryRetryTimer OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify a retry interval for this LSP."
DEFVAL { 30 }
::= { rsvpTeTrunkEntry 18 }
rsvpTeTrunkPrimarySetupPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a setup priority for this LSP."
DEFVAL { 0 }
::= { rsvpTeTrunkEntry 19 }
rsvpTeTrunkSecondarySetupPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure a setup priority for this LSP."
::= { rsvpTeTrunkEntry 20}
rsvpTeTrunkdestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the IPv4 tunnel egress."
::= { rsvpTeTrunkEntry 21}
rsvpTeTrunkLSPCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total LSP count of the rsvp trunk."
::= { rsvpTeTrunkEntry 22 }
-- rsvpTe: rsvp trunk - map route
rsvpTeTrunkMapRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeTrunkMapRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Map route entries in trunk."
::= { rsvpTe 4}
rsvpTeTrunkMapRouteEntry OBJECT-TYPE
SYNTAX RsvpTeTrunkMapRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of map route table"
INDEX { rsvpTeTrunkName , rsvpTeTrunkMapRouteIpAddr, rsvpTeTrunkMapRouteIpMaskLength}
::= { rsvpTeTrunkMapRouteTable 1}
RsvpTeTrunkMapRouteEntry ::=
SEQUENCE
{
rsvpTeTrunkMapRouteIpAddr
IpAddress,
rsvpTeTrunkMapRouteIpMaskLength
Integer32,
rsvpTeTrunkMapRouteRowStatus
RowStatus
}
rsvpTeTrunkMapRouteIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the prefix to be mapped."
::= { rsvpTeTrunkMapRouteEntry 1}
rsvpTeTrunkMapRouteIpMaskLength OBJECT-TYPE
SYNTAX Integer32 (0.. 32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the prefix length to be mapped."
::= { rsvpTeTrunkMapRouteEntry 2}
rsvpTeTrunkMapRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the rsvpTeTrunkMapRouteEntry row
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { rsvpTeTrunkMapRouteEntry 3}
-- rsvpTe: rsvp path
rsvpTePathTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTePathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of rsvp path entries."
::= { rsvpTe 5 }
rsvpTePathEntry OBJECT-TYPE
SYNTAX RsvpTePathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvp path table."
INDEX { rsvpTePathName }
::= { rsvpTePathTable 1 }
RsvpTePathEntry ::=
SEQUENCE
{
rsvpTePathName
OCTET STRING,
rsvpTePathRowStatus
RowStatus
}
rsvpTePathName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of rsvp path."
::= { rsvpTePathEntry 1 }
rsvpTePathRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the rsvpTePathEntry row
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { rsvpTePathEntry 2 }
-- rsvpTe: rsvp path node
rsvpTePathHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTePathHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of rsvp path hop entries."
::= { rsvpTe 6 }
rsvpTePathHopEntry OBJECT-TYPE
SYNTAX RsvpTePathHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvp path hop table."
INDEX { rsvpTePathName, rsvpTePathHopAddrID }
::= { rsvpTePathHopTable 1 }
RsvpTePathHopEntry ::=
SEQUENCE
{
rsvpTePathHopAddrID
Integer32,
rsvpTePathHopAddrType
INTEGER,
rsvpTePathHopAddr
IpAddress,
rsvpTePathHopRowStatus
RowStatus
}
rsvpTePathHopAddrID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of a node in rsvp path. It should be unique under same path name."
::= { rsvpTePathHopEntry 1 }
rsvpTePathHopAddrType OBJECT-TYPE
SYNTAX INTEGER {loose(1), strict(2)}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of a node in rsvp path."
::= { rsvpTePathHopEntry 2 }
rsvpTePathHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure IPv4 Address of Hop."
::= { rsvpTePathHopEntry 3 }
rsvpTePathHopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the rsvpTePathEntry row
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { rsvpTePathHopEntry 4 }
-- rsvpTe: show rsvp
rsvpTeSummary OBJECT IDENTIFIER
::= { rsvpTe 7}
rsvpTeSummarySessionTatolCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of the rsvp session."
::= { rsvpTeSummary 1 }
rsvpTeSummarySessionUpCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of the rsvp session which status is up."
::= { rsvpTeSummary 2 }
rsvpTeSummarySessionDownCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of the rsvp session which status is down."
::= { rsvpTeSummary 3 }
rsvpTeSummarySessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeSummarySessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of rsvp session."
::= { rsvpTeSummary 4 }
rsvpTeSummarySessionEntry OBJECT-TYPE
SYNTAX RsvpTeSummarySessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvpTeSummarySessionTable"
INDEX { rsvpTeSummarySessionLSPId, rsvpTeSummarySessionSource, rsvpTeSummarySessionDestination, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionExtTunnelId }
::= { rsvpTeSummarySessionTable 1 }
RsvpTeSummarySessionEntry ::=
SEQUENCE
{
rsvpTeSummarySessionLSPId
Integer32,
rsvpTeSummarySessionSource
IpAddress,
rsvpTeSummarySessionDestination
IpAddress,
rsvpTeSummarySessionTunnelId
Integer32,
rsvpTeSummarySessionExtTunnelId
IpAddress,
rsvpTeSummarySessionTrunkName
OCTET STRING,
rsvpTeSummarySessionState
INTEGER,
rsvpTeSummarySessionIsPrimary
INTEGER,
rsvpTeSummarySessionReserve
INTEGER,
rsvpTeSummarySessionRefCount
Integer32,
rsvpTeSummarySessionLabelIn
Integer32,
rsvpTeSummarySessionLabelOut
Integer32,
rsvpTeSummarySessionType
INTEGER,
rsvpTeSummarySessionFSMState
INTEGER,
rsvpTeSummarySessionSetupPriority
Integer32,
rsvpTeSummarySessionHoldPriority
Integer32,
rsvpTeSummarySessionCspfUsage
INTEGER,
rsvpTeSummarySessionLSPMetric
Integer32,
rsvpTeSummarySessionLSPProtection
INTEGER,
rsvpTeSummarySessionUpStreamAddr
IpAddress,
rsvpTeSummarySessionUpStreamIfIndex
Integer32,
rsvpTeSummarySessionDownStreamAddr
IpAddress,
rsvpTeSummarySessionDownStreamIfIndex
Integer32,
rsvpTeSummarySessionPathRefreshSec
Integer32,
rsvpTeSummarySessionPathRefreshDue
Integer32,
rsvpTeSummarySessionPathRREnable
INTEGER,
rsvpTeSummarySessionLifeTime
Integer32,
rsvpTeSummarySessionDueTime
Integer32,
rsvpTeSummarySessionStyle
INTEGER,
rsvpTeSummarySessionTrafficType
INTEGER,
rsvpTeSummarySessionMTU
Integer32,
rsvpTeSummarySessionLastErrorCode
OCTET STRING,
rsvpTeSummarySessionLastErrorValue
OCTET STRING,
rsvpTeSummarySessionLastErrorNode
IpAddress,
rsvpTeSummarySessionTrunkType
INTEGER
}
rsvpTeSummarySessionLSPId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Lsp id of the rsvp session. "
::= { rsvpTeSummarySessionEntry 1 }
rsvpTeSummarySessionSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Source address of the rsvp session."
::= { rsvpTeSummarySessionEntry 2 }
rsvpTeSummarySessionDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination address of the rsvp session."
::= { rsvpTeSummarySessionEntry 3 }
rsvpTeSummarySessionTunnelId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel id of the rsvp session. "
::= { rsvpTeSummarySessionEntry 4 }
rsvpTeSummarySessionExtTunnelId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ext-Tunnel id of the rsvp session. "
::= { rsvpTeSummarySessionEntry 5 }
rsvpTeSummarySessionTrunkName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the rsvp trunk"
::= { rsvpTeSummarySessionEntry 6 }
rsvpTeSummarySessionState OBJECT-TYPE
SYNTAX INTEGER {up(1), down(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"state of the rsvp session."
::= { rsvpTeSummarySessionEntry 7 }
rsvpTeSummarySessionIsPrimary OBJECT-TYPE
SYNTAX INTEGER {primary(1), secondary(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the rsvp session is primary or secondary."
::= { rsvpTeSummarySessionEntry 8 }
rsvpTeSummarySessionReserve OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If resource reserve is enabled for this session."
::= { rsvpTeSummarySessionEntry 9 }
rsvpTeSummarySessionRefCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference count of the rsvp session."
::= { rsvpTeSummarySessionEntry 10 }
rsvpTeSummarySessionLabelIn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In lable of the rsvp session."
::= { rsvpTeSummarySessionEntry 11 }
rsvpTeSummarySessionLabelOut OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out lable of the rsvp session."
::= { rsvpTeSummarySessionEntry 12 }
rsvpTeSummarySessionType OBJECT-TYPE
SYNTAX INTEGER {ingress(1), transmit(2), egress(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the rsvp session"
::= { rsvpTeSummarySessionEntry 13 }
rsvpTeSummarySessionFSMState OBJECT-TYPE
SYNTAX INTEGER {idle(0), gmplsLabelValidateSent(1), qosResvSentforReverseDir(2), nexthopRequestSent(3), waitingforRESVmessage(4), labelRequestSent(5), mplsMessageSent(6), operational(7), usingBackup(8)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FSM state of the rsvp session"
::= { rsvpTeSummarySessionEntry 14 }
rsvpTeSummarySessionSetupPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Setup priority of the rsvp session"
::= { rsvpTeSummarySessionEntry 15 }
rsvpTeSummarySessionHoldPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hold priority of the rsvp session"
::= { rsvpTeSummarySessionEntry 16 }
rsvpTeSummarySessionCspfUsage OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If CSPF is enabled for this session. "
::= { rsvpTeSummarySessionEntry 17 }
rsvpTeSummarySessionLSPMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LSP Metric of the rsvp session. "
::= { rsvpTeSummarySessionEntry 18 }
rsvpTeSummarySessionLSPProtection OBJECT-TYPE
SYNTAX INTEGER {oneToOne(1), facility(2), none(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LSP Protection type of the rsvp session. "
::= { rsvpTeSummarySessionEntry 19 }
rsvpTeSummarySessionUpStreamAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream Ip Address of the rsvp session. "
::= { rsvpTeSummarySessionEntry 20 }
rsvpTeSummarySessionUpStreamIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upstream interface index of the rsvp session. "
::= { rsvpTeSummarySessionEntry 21 }
rsvpTeSummarySessionDownStreamAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DownStream Ip Address of the rsvp session. "
::= { rsvpTeSummarySessionEntry 22 }
rsvpTeSummarySessionDownStreamIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downstream interface index of the rsvp session. "
::= { rsvpTeSummarySessionEntry 23 }
rsvpTeSummarySessionPathRefreshSec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The refresh time of the rsvp path in session. "
::= { rsvpTeSummarySessionEntry 24 }
rsvpTeSummarySessionPathRefreshDue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The due time of the rsvp path in session. "
::= { rsvpTeSummarySessionEntry 25 }
rsvpTeSummarySessionPathRREnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If refresh reduction is enabled for this rsvp session. "
::= { rsvpTeSummarySessionEntry 26 }
rsvpTeSummarySessionLifeTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The life time for this rsvp session. "
::= { rsvpTeSummarySessionEntry 27 }
rsvpTeSummarySessionDueTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The due time for this rsvp session. "
::= { rsvpTeSummarySessionEntry 28 }
rsvpTeSummarySessionStyle OBJECT-TYPE
SYNTAX INTEGER {fixedFilter(1), sharedExplicitFilter(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The style this rsvp session. "
::= { rsvpTeSummarySessionEntry 29 }
rsvpTeSummarySessionTrafficType OBJECT-TYPE
SYNTAX INTEGER {guaranteed(1), controlledLoad(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic type this rsvp session. "
::= { rsvpTeSummarySessionEntry 30 }
rsvpTeSummarySessionMTU OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MTU this rsvp session. "
::= { rsvpTeSummarySessionEntry 31 }
rsvpTeSummarySessionLastErrorCode OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code this rsvp session. "
::= { rsvpTeSummarySessionEntry 32 }
rsvpTeSummarySessionLastErrorValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error value this rsvp session. "
::= { rsvpTeSummarySessionEntry 33 }
rsvpTeSummarySessionLastErrorNode OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error value this rsvp session. "
::= { rsvpTeSummarySessionEntry 34 }
rsvpTeSummarySessionTrunkType OBJECT-TYPE
SYNTAX INTEGER {gmpls(1), mpls(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error value this rsvp session. "
::= { rsvpTeSummarySessionEntry 35 }
rsvpTeSummarySessionExplicitRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeSummarySessionExplicitRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Explicit route in rsvp session."
::= { rsvpTeSummary 5 }
rsvpTeSummarySessionExplicitRouteEntry OBJECT-TYPE
SYNTAX RsvpTeSummarySessionExplicitRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvpTeSummarySessionExplicitRouteTable"
INDEX {rsvpTeSummarySessionDestination, rsvpTeSummarySessionSource, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionLSPId, rsvpTeSummarySessionExtTunnelId, rsvpTeSummarySessionExplicitRouteAddrId}
::= { rsvpTeSummarySessionExplicitRouteTable 1 }
RsvpTeSummarySessionExplicitRouteEntry ::=
SEQUENCE
{
rsvpTeSummarySessionExplicitRouteAddrId
Integer32,
rsvpTeSummarySessionExplicitRouteAddr
IpAddress,
rsvpTeSummarySessionExplicitRouteMaskLen
Integer32,
rsvpTeSummarySessionExplicitRouteType
INTEGER
}
rsvpTeSummarySessionExplicitRouteAddrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of an explicit route entry. "
::= { rsvpTeSummarySessionExplicitRouteEntry 1 }
rsvpTeSummarySessionExplicitRouteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv4 address of an explicit route entry. "
::= { rsvpTeSummarySessionExplicitRouteEntry 2 }
rsvpTeSummarySessionExplicitRouteMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv4 mask length of an explicit route entry. "
::= { rsvpTeSummarySessionExplicitRouteEntry 3 }
rsvpTeSummarySessionExplicitRouteType OBJECT-TYPE
SYNTAX INTEGER {strict(1), loose(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of an explicit route entry. "
::= { rsvpTeSummarySessionExplicitRouteEntry 4 }
rsvpTeSummarySessionRecvRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeSummarySessionRecvRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Recv route in rsvp session."
::= { rsvpTeSummary 6 }
rsvpTeSummarySessionRecvRouteEntry OBJECT-TYPE
SYNTAX RsvpTeSummarySessionRecvRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvpTeSummarySessionRecvRouteTable"
INDEX { rsvpTeSummarySessionLSPId, rsvpTeSummarySessionSource, rsvpTeSummarySessionDestination, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionExtTunnelId, rsvpTeSummarySessionRecvRouteAddrId }
::= { rsvpTeSummarySessionRecvRouteTable 1 }
RsvpTeSummarySessionRecvRouteEntry ::=
SEQUENCE
{
rsvpTeSummarySessionRecvRouteAddrId
Integer32,
rsvpTeSummarySessionRecvRouteAddr
IpAddress,
rsvpTeSummarySessionRecvRouteMaskLen
Integer32,
rsvpTeSummarySessionRecvRouteType
INTEGER
}
rsvpTeSummarySessionRecvRouteAddrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv4 address of an Recv route entry. "
::= { rsvpTeSummarySessionRecvRouteEntry 1 }
rsvpTeSummarySessionRecvRouteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv4 address of an Recv route entry. "
::= { rsvpTeSummarySessionRecvRouteEntry 2 }
rsvpTeSummarySessionRecvRouteMaskLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv4 mask length of an Recv route entry. "
::= { rsvpTeSummarySessionRecvRouteEntry 3 }
rsvpTeSummarySessionRecvRouteType OBJECT-TYPE
SYNTAX INTEGER {strict(1), loose(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of an Recv route entry. "
::= { rsvpTeSummarySessionRecvRouteEntry 4 }
rsvpTeSummarySessionRecordRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsvpTeSummarySessionRecordRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Record route in rsvp session."
::= { rsvpTeSummary 7 }
rsvpTeSummarySessionRecordRouteEntry OBJECT-TYPE
SYNTAX RsvpTeSummarySessionRecordRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of rsvpTeSummarySessionRecordRouteTable"
INDEX { rsvpTeSummarySessionLSPId, rsvpTeSummarySessionSource, rsvpTeSummarySessionDestination, rsvpTeSummarySessionTunnelId, rsvpTeSummarySessionExtTunnelId, rsvpTeSummarySessionRecordRouteAddrId }
::= { rsvpTeSummarySessionRecordRouteTable 1 }
RsvpTeSummarySessionRecordRouteEntry ::=
SEQUENCE
{
rsvpTeSummarySessionRecordRouteAddrId
Integer32,
rsvpTeSummarySessionRecordRouteAddr
OCTET STRING
}
rsvpTeSummarySessionRecordRouteAddrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of an Record route entry. "
::= { rsvpTeSummarySessionRecordRouteEntry 1 }
rsvpTeSummarySessionRecordRouteAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv4 address of an Record route entry. "
::= { rsvpTeSummarySessionRecordRouteEntry 2 }
rsvpTeSummaryStatistics OBJECT IDENTIFIER
::= { rsvpTeSummary 8}
rsvpTeSummaryPathSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp path packet sent from this system. "
::= { rsvpTeSummaryStatistics 1 }
rsvpTeSummaryPathRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp path packet recieved by this system. "
::= { rsvpTeSummaryStatistics 2 }
rsvpTeSummaryPathErrSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp path-err packet sent from this system. "
::= { rsvpTeSummaryStatistics 3 }
rsvpTeSummaryPathErrRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp path-err packet recieved by this system. "
::= { rsvpTeSummaryStatistics 4 }
rsvpTeSummaryPathTearSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp path-tear packet sent from this system. "
::= { rsvpTeSummaryStatistics 5 }
rsvpTeSummaryPathTearRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp path-tear packet recieved by this system. "
::= { rsvpTeSummaryStatistics 6 }
rsvpTeSummaryResvFFSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-FF packet sent from this system. "
::= { rsvpTeSummaryStatistics 7 }
rsvpTeSummaryResvFFRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-FF packet recieved by this system. "
::= { rsvpTeSummaryStatistics 8 }
rsvpTeSummaryResvWFSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-WF packet sent from this system. "
::= { rsvpTeSummaryStatistics 9 }
rsvpTeSummaryResvWFRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-WF packet recieved by this system. "
::= { rsvpTeSummaryStatistics 10 }
rsvpTeSummaryResvSESent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-SE packet sent from this system. "
::= { rsvpTeSummaryStatistics 11 }
rsvpTeSummaryResvSERecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-SE packet recieved by this system. "
::= { rsvpTeSummaryStatistics 12 }
rsvpTeSummaryResvErrSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-Err packet sent from this system. "
::= { rsvpTeSummaryStatistics 13 }
rsvpTeSummaryResvErrRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-Err packet recieved by this system. "
::= { rsvpTeSummaryStatistics 14 }
rsvpTeSummaryResvTearSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-Tear packet sent from this system. "
::= { rsvpTeSummaryStatistics 15 }
rsvpTeSummaryResvTearRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-Tear packet recieved by this system. "
::= { rsvpTeSummaryStatistics 16 }
rsvpTeSummaryResvConfSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-Conf packet sent from this system. "
::= { rsvpTeSummaryStatistics 17 }
rsvpTeSummaryResvConfRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Resv-Conf packet recieved by this system. "
::= { rsvpTeSummaryStatistics 18 }
rsvpTeSummaryHelloSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Hello packet sent from this system. "
::= { rsvpTeSummaryStatistics 19 }
rsvpTeSummaryHelloRecv
OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Hello packet recieved by this system. "
::= { rsvpTeSummaryStatistics 20 }
rsvpTeSummaryBundleSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Bundle packet sent from this system. "
::= { rsvpTeSummaryStatistics 21 }
rsvpTeSummaryBundleRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp Bundle packet recieved by this system. "
::= { rsvpTeSummaryStatistics 22 }
rsvpTeSummaryAckSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp ack packet sent from this system. "
::= { rsvpTeSummaryStatistics 23 }
rsvpTeSummaryAckRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp ack packet recieved by this system. "
::= { rsvpTeSummaryStatistics 24 }
rsvpTeSummarySrefreshSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp srefresh packet sent from this system. "
::= { rsvpTeSummaryStatistics 25 }
rsvpTeSummarySrefreshRecv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of the rsvp srefresh packet recieved by this system. "
::= { rsvpTeSummaryStatistics 26 }
-- Sub Module: g.8031
-- g8031: eps group
g8031EpsGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF G8031EpsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of G.8031 eps group."
::= { g8031 1 }
g8031EpsGroupEntry OBJECT-TYPE
SYNTAX G8031EpsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of G.8031 eps group."
INDEX { g8031EpsGroupId }
::= { g8031EpsGroupTable 1 }
G8031EpsGroupEntry ::=
SEQUENCE
{
g8031EpsGroupId
Integer32,
g8031EpsGroupWorkingIfindex
Integer32,
g8031EpsGroupProtectionIfindex
Integer32,
g8031EpsGroupRowStatus
RowStatus,
g8031EpsGroupWTR
Integer32,
g8031EpsGroupHoldOff
Integer32,
g8031EpsGroupMode
INTEGER,
g8031EpsGroupDomain
OCTET STRING,
g8031EpsGroupWorkingService
OCTET STRING,
g8031EpsGroupProtectionService
OCTET STRING,
g8031EpsGroupCurrentState
INTEGER,
g8031EpsGroupLastState
INTEGER,
g8031EpsGroupLastEvent
INTEGER,
g8031EpsGroupFarEndState
INTEGER,
g8031EpsGroupRequestSignal
INTEGER,
g8031EpsGroupBridgeSignal
INTEGER,
g8031EpsGroupAPSVid
Integer32,
g8031EpsGroupDFOPState
INTEGER
}
g8031EpsGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Id of G.8031 eps group."
::= { g8031EpsGroupEntry 1 }
g8031EpsGroupWorkingIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Working interface of G.8031 eps group."
::= { g8031EpsGroupEntry 2 }
g8031EpsGroupProtectionIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Protection interface of G.8031 eps group."
::= { g8031EpsGroupEntry 3 }
g8031EpsGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the g8031EpsGroupEntry row.
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { g8031EpsGroupEntry 4 }
g8031EpsGroupWTR OBJECT-TYPE
SYNTAX Integer32(5..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wait to restore timer in minute"
DEFVAL { 5 }
::= { g8031EpsGroupEntry 5 }
g8031EpsGroupHoldOff OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hold off timer in 100 ms"
DEFVAL { 0 }
::= { g8031EpsGroupEntry 6 }
g8031EpsGroupMode OBJECT-TYPE
SYNTAX INTEGER {revertive(1), nonRevertive(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Revertive mode of G.8031 eps group."
DEFVAL { revertive }
::= { g8031EpsGroupEntry 7 }
g8031EpsGroupDomain OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm domain of the G.8031 eps group."
::= { g8031EpsGroupEntry 8}
g8031EpsGroupWorkingService OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm service id of working entity for the G.8031 eps group."
::= { g8031EpsGroupEntry 9}
g8031EpsGroupProtectionService OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm service id of protection entity for the G.8031 eps group."
::= { g8031EpsGroupEntry 10}
g8031EpsGroupCurrentState OBJECT-TYPE
SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the G.8031 eps group."
::= { g8031EpsGroupEntry 11}
g8031EpsGroupLastState OBJECT-TYPE
SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last state of the G.8031 eps group."
::= { g8031EpsGroupEntry 12}
g8031EpsGroupLastEvent OBJECT-TYPE
SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last event of the G.8031 eps group."
::= { g8031EpsGroupEntry 13}
g8031EpsGroupFarEndState OBJECT-TYPE
SYNTAX INTEGER{nr(0), dnr(1), rr(2), exec(4), wtr(5), ms(7), sd(9), sf-w(11), fs(13), sf-p(14), lo(15)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Far end state of the G.8031 eps group."
::= { g8031EpsGroupEntry 14}
g8031EpsGroupRequestSignal OBJECT-TYPE
SYNTAX INTEGER{null(0), normal(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Request signal of the G.8031 eps group."
::= { g8031EpsGroupEntry 15}
g8031EpsGroupBridgeSignal OBJECT-TYPE
SYNTAX INTEGER{null(0), normal(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bridge signal of the G.8031 eps group."
::= { g8031EpsGroupEntry 16}
g8031EpsGroupAPSVid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vid of aps packet for the G.8031 eps group."
::= { g8031EpsGroupEntry 17}
g8031EpsGroupDFOPState OBJECT-TYPE
SYNTAX INTEGER{not-in-defect(1), b-bit-mismatch(5), r-bit-mismatch(8), aps-on-working(56)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DFOP of the G.8031 eps group."
::= { g8031EpsGroupEntry 18}
g8031EpsGroupInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF G8031EpsGroupInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of instance proceted by G.8031 eps group."
::= { g8031 2 }
g8031EpsGroupInstanceEntry OBJECT-TYPE
SYNTAX G8031EpsGroupInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of instance proceted by G.8031 eps group."
INDEX { g8031EpsGroupId, g8031EpsGroupInstanceId }
::= { g8031EpsGroupInstanceTable 1 }
G8031EpsGroupInstanceEntry ::=
SEQUENCE
{
g8031EpsGroupInstanceId
Integer32,
g8031EpsGroupInstanceRowStatus
RowStatus
}
g8031EpsGroupInstanceId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Id of instance protected by G.8031 eps group."
::= { g8031EpsGroupInstanceEntry 1 }
g8031EpsGroupInstanceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the G8031EpsGroupInstanceEntry row.
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { g8031EpsGroupInstanceEntry 2 }
-- Sub Module: g.8032
-- g8032: eps group
g8032RingTable OBJECT-TYPE
SYNTAX SEQUENCE OF G8032RingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of G.8032 ring."
::= { g8032 1 }
g8032RingEntry OBJECT-TYPE
SYNTAX G8032RingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of G.8032 ring."
INDEX { g8032RingId }
::= { g8032RingTable 1 }
G8032RingEntry ::=
SEQUENCE
{
g8032RingId
Integer32,
g8032RingMajorRingId
Integer32,
g8032RingEastIfindex
Integer32,
g8032RingWestIfindex
Integer32,
g8032RingRowStatus
RowStatus,
g8032RingDomain
OCTET STRING,
g8032RingService
OCTET STRING,
g8032RingControlVlan
Integer32,
g8032RingWTR
Integer32,
g8032RingHoldOff
Integer32,
g8032RingGuard
Integer32,
g8032RingRole
INTEGER,
g8032RingRpl
INTEGER,
g8032RingCurrentStatus
INTEGER,
g8032RingEastStatus
INTEGER,
g8032RingWestStatus
INTEGER,
g8032RingCurrentEvent
INTEGER,
g8032RingProtectInstance
OCTET STRING,
g8032RingProtectTrigger
INTEGER,
g8032RingFlushRRPPState
INTEGER,
g8032RingFlushRRPPVlan
Integer32,
g8032RingFlushRRPPCount
Integer32
}
g8032RingId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Id of G.8032 ring."
::= { g8032RingEntry 1 }
g8032RingMajorRingId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Major ring id of G.8032 ring."
::= { g8032RingEntry 2 }
g8032RingEastIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"East interface index of G.8032 ring."
::= { g8032RingEntry 3 }
g8032RingWestIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"West interface index of G.8032 ring."
::= { g8032RingEntry 4 }
g8032RingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the g8032RingEntry row.
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { g8032RingEntry 5 }
g8032RingDomain OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm domain of the G.8032 ring."
::= { g8032RingEntry 6 }
g8032RingService OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cfm service id of the G.8032 ring."
::= { g8032RingEntry 7 }
g8032RingControlVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control vlan of the G.8032 ring."
::= { g8032RingEntry 8}
g8032RingWTR OBJECT-TYPE
SYNTAX Integer32(5..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wait to restore timer of the G.8032 ring. (minutes)"
DEFVAL {5}
::= { g8032RingEntry 9 }
g8032RingHoldOff OBJECT-TYPE
SYNTAX Integer32(0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hold off timer of the G.8032 ring. Value in multiples of 100. (milliseconds)"
DEFVAL {0}
::= { g8032RingEntry 10 }
g8032RingGuard OBJECT-TYPE
SYNTAX Integer32(100..2000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Guard timer of the G.8032 ring. Value in multiples of 100. (milliseconds)"
DEFVAL {500}
::= { g8032RingEntry 11 }
g8032RingRole OBJECT-TYPE
SYNTAX INTEGER {owner(1), non-owner(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Role of the G.8032 ring."
::= { g8032RingEntry 12 }
g8032RingRpl OBJECT-TYPE
SYNTAX INTEGER {none(0), east(1), west(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rpl(ring protection link) of the G.8032 ring."
::= { g8032RingEntry 13 }
g8032RingCurrentStatus OBJECT-TYPE
SYNTAX INTEGER {init(0), idle(1), protection(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current Status of the G.8032 ring."
::= { g8032RingEntry 14 }
g8032RingEastStatus OBJECT-TYPE
SYNTAX INTEGER {block(1), forward(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the east interface."
::= { g8032RingEntry 15 }
g8032RingWestStatus OBJECT-TYPE
SYNTAX INTEGER {block(1), forward(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the west interface."
::= { g8032RingEntry 16 }
g8032RingCurrentEvent OBJECT-TYPE
SYNTAX INTEGER {nr(0), nr-rb(1), wtr(2), wtr-exp(3), remote-sf(4), local-clear-sf(5), local-sf(6)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Event of the G.8032 ring."
::= { g8032RingEntry 17 }
g8032RingProtectInstance OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protect instance of the G.8032 ging."
::= { g8032RingEntry 18 }
g8032RingProtectTrigger OBJECT-TYPE
SYNTAX INTEGER {all(0), ccm(1), pyh(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protect trigger of the G.8032 ging."
::= { g8032RingEntry 19 }
g8032RingFlushRRPPState OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flush RRPP state of the G.8032 ging."
::= { g8032RingEntry 20 }
g8032RingFlushRRPPVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flush RRPP Vlan of the G.8032 ging."
::= { g8032RingEntry 21 }
g8032RingFlushRRPPCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flush RRPP count of the G.8032 ging."
::= { g8032RingEntry 22 }
g8032RingInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF G8032RingInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of instance proceted by G.8032 ring."
::= { g8032 2 }
g8032RingInstanceEntry OBJECT-TYPE
SYNTAX G8032RingInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of instance proceted by G.8032 ring."
INDEX { g8032RingId, g8032RingInstanceId }
::= { g8032RingInstanceTable 1 }
G8032RingInstanceEntry ::=
SEQUENCE
{
g8032RingInstanceId
Integer32,
g8032RingInstanceRowStatus
RowStatus
}
g8032RingInstanceId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Id of instance protected by G.8032 ring."
::= { g8032RingInstanceEntry 1 }
g8032RingInstanceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the G8032RingInstanceEntry row.
1 means Active
4 means CreateAndGo
6 means Destroy."
::= { g8032RingInstanceEntry 2 }
voiceVlanEnableVlan OBJECT-TYPE
SYNTAX Integer32 (0|2..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify voice VLAN from 2 to 4094. 0 means voice vlan is disabled."
DEFVAL { 0 }
::= { voiceVlan 1 }
voiceVlanEnableSecurity OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify voice VLAN security mode,1 will enable it,2 will disable it."
::= { voiceVlan 2 }
voiceVlanCOS OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the COS of voice vlan."
DEFVAL { 5 }
::= { voiceVlan 3 }
voiceVlanEnableInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoiceVlanEnableInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The voice vlan enable interface table."
::= { voiceVlan 4 }
voiceVlanEnableInterfaceEntry OBJECT-TYPE
SYNTAX VoiceVlanEnableInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The voice vlan enable interface table entry."
INDEX { ifIndex }
::= { voiceVlanEnableInterfaceTable 1 }
VoiceVlanEnableInterfaceEntry ::=
SEQUENCE {
voiceVlanEnableInterfaceStatus
TruthValue
}
voiceVlanEnableInterfaceStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable voice vlan on port,1 will enable it,2 will disable it."
::= { voiceVlanEnableInterfaceEntry 1 }
voiceVlanOuiEntryTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoiceVlanOuiEntryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table description."
::= { voiceVlan 5 }
voiceVlanOuiEntryEntry OBJECT-TYPE
SYNTAX VoiceVlanOuiEntryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry description."
INDEX { voiceVlanOuiEntryId }
::= { voiceVlanOuiEntryTable 1 }
VoiceVlanOuiEntryEntry ::=
SEQUENCE {
voiceVlanOuiEntryId
Integer32,
voiceVlanOuiEntryMac
MacAddress,
voiceVlanOuiEntryMask
MacAddress,
voiceVlanOuiEntryDescription
OCTET STRING,
voiceVlanOuiEntryRowstatus
RowStatus
}
voiceVlanOuiEntryId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OUI_id Desc."
::= { voiceVlanOuiEntryEntry 1 }
voiceVlanOuiEntryMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MAC Desc."
::= { voiceVlanOuiEntryEntry 2 }
voiceVlanOuiEntryMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MASK Desc."
::= { voiceVlanOuiEntryEntry 3 }
voiceVlanOuiEntryDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"description description."
::= { voiceVlanOuiEntryEntry 4 }
voiceVlanOuiEntryRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { voiceVlanOuiEntryEntry 5 }
iviRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IviRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for IVI route."
::= { ivi 1 }
iviRouteEntry OBJECT-TYPE
SYNTAX IviRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of IVI route."
INDEX { iviRouteIndex }
::= { iviRouteTable 1 }
IviRouteEntry ::=
SEQUENCE {
iviRouteIndex
Integer32,
iviRouteIpv6address
OCTET STRING,
iviRouteIpv6addressMask
Integer32,
iviRouteIpv4address
IpAddress,
iviRouteIpv4addressMask
Integer32,
iviRouteRowStatus
RowStatus
}
iviRouteIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IVI entry index."
DEFVAL { 0 }
::= { iviRouteEntry 1 }
iviRouteIpv6address OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ipv6 address of IVI entry."
::= { iviRouteEntry 2 }
iviRouteIpv6addressMask OBJECT-TYPE
SYNTAX Integer32 (8..96)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ipv6 prefix length."
DEFVAL { 0 }
::= { iviRouteEntry 3 }
iviRouteIpv4address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ipv4 address of IVI entry"
::= { iviRouteEntry 4 }
iviRouteIpv4addressMask OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ipv4 prefix length."
DEFVAL { 0 }
::= { iviRouteEntry 5 }
iviRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual row. Now only realize CreateAndGo(4)
and Destroy(6) and Active(1)."
::= { iviRouteEntry 6 }
iviInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IviInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for IVI enable status."
::= { ivi 2 }
iviInterfaceEntry OBJECT-TYPE
SYNTAX IviInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of IVI enable status."
INDEX { ifIndex }
::= { iviInterfaceTable 1 }
IviInterfaceEntry ::=
SEQUENCE {
iviInterfaceStatus
TruthValue
}
iviInterfaceStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IVI status on the interface."
::= { iviInterfaceEntry 1 }
-- Sub Module: L2 protocol
--
-- L2 protocol tunnel Enable
--
l2ProtocolTunnelEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable L2ProtocolTunnel."
::= { l2protocol 1 }
--
-- L2 protocol tunnel destnation Mac set
--
l2ProtocolTunnelDestMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tunnel's destination MAC address, could be 0100.0CCD.CDD0-D2 or 010F.E200.0003.
The default dest MAC address is 0100.0CCD.CDD0."
::= { l2protocol 2 }
l2ProtocolTunnelCOS OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This node is used to configure layer2 protocol default COS values."
DEFVAL { 0 }
::= { l2protocol 3 }
--
-- L2 protocol Mac set
--
l2ProtocolMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of the destination MAC 0180.c2xx.xxxx."
::= { l2protocol 5 }
l2ProtocolMacEntry OBJECT-TYPE
SYNTAX L2ProtocolMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the destination MAC table."
INDEX { l2ProtocolMacIndex }
::= { l2ProtocolMacTable 1 }
L2ProtocolMacEntry ::=
SEQUENCE {
l2ProtocolMacIndex Integer32,
l2ProtocolMac MacAddress,
l2ProtocolMacMask MacAddress,
l2ProtocolMacRowstatus RowStatus
}
l2ProtocolMacIndex OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the mac entry. The value of index plus 1 equals the value in cli."
::= { l2ProtocolMacEntry 1 }
l2ProtocolMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "L2 protocol MAC address, should be 0180.C200.0000-0180.C2FF.FFFF."
::= { l2ProtocolMacEntry 2 }
l2ProtocolMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "L2 protocol MAC mask, should be FFFF.FF00.0000-FFFF.FFFF.FFFF."
::= { l2ProtocolMacEntry 3 }
l2ProtocolMacRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active."
::= { l2ProtocolMacEntry 4 }
--
-- L2 protocol tunnel Mac set
--
l2ProtocolTunnelMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolTunnelMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of mac tunnel enable or not."
::= { l2protocol 6 }
l2ProtocolTunnelMacEntry OBJECT-TYPE
SYNTAX L2ProtocolTunnelMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of mac tunnel enable or not."
INDEX { interfaceIndex, l2ProtocolMacIndex}
::= { l2ProtocolTunnelMacTable 1 }
L2ProtocolTunnelMacEntry ::=
SEQUENCE {
l2ProtocolTunnelMacType INTEGER,
l2ProtocolTunnelMacEvcName OCTET STRING,
l2ProtocolTunnelMacRowstatus RowStatus
}
l2ProtocolTunnelMacType OBJECT-TYPE
SYNTAX INTEGER
{
peer(0),
tunnel(1),
discard(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of l2 protocol action.
0 peer.
1 tunnel.
2 discard."
DEFVAL { peer }
::= { l2ProtocolTunnelMacEntry 1 }
l2ProtocolTunnelMacEvcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the evc entry."
::= { l2ProtocolTunnelMacEntry 2 }
l2ProtocolTunnelMacRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
In this node when Destroy the entry the default type peer will be used."
::= { l2ProtocolTunnelMacEntry 3 }
--
-- L2 protocol tunnel dot1x set
--
l2ProtocolTunnelDot1xTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolTunnelDot1xEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of Dot1x tunnel enable or not."
::= { l2protocol 7 }
l2ProtocolTunnelDot1xEntry OBJECT-TYPE
SYNTAX L2ProtocolTunnelDot1xEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of Dot1x tunnel enable or not."
INDEX { interfaceIndex}
::= { l2ProtocolTunnelDot1xTable 1 }
L2ProtocolTunnelDot1xEntry ::=
SEQUENCE {
l2ProtocolTunnelDot1xType INTEGER,
l2ProtocolTunnelDot1xEvcName OCTET STRING,
l2ProtocolTunnelDot1xRowstatus RowStatus
}
l2ProtocolTunnelDot1xType OBJECT-TYPE
SYNTAX INTEGER
{
peer(0),
tunnel(1),
discard(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of l2 protocol action.
0 peer.
1 tunnel.
2 discard."
DEFVAL { peer }
::= { l2ProtocolTunnelDot1xEntry 1 }
l2ProtocolTunnelDot1xEvcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the evc entry."
::= { l2ProtocolTunnelDot1xEntry 2 }
l2ProtocolTunnelDot1xRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
In this node when Destroy the entry the default type peer will be used."
::= { l2ProtocolTunnelDot1xEntry 3 }
--
-- L2 protocol tunnel Slow Proto set
--
l2ProtocolTunnelSlowProtoTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolTunnelSlowProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of slow protocol tunnel enable or not."
::= { l2protocol 8 }
l2ProtocolTunnelSlowProtoEntry OBJECT-TYPE
SYNTAX L2ProtocolTunnelSlowProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of slow proto tunnel enable or not."
INDEX { interfaceIndex}
::= { l2ProtocolTunnelSlowProtoTable 1 }
L2ProtocolTunnelSlowProtoEntry ::=
SEQUENCE {
l2ProtocolTunnelSlowProtoType INTEGER,
l2ProtocolTunnelSlowProtoEvcName OCTET STRING,
l2ProtocolTunnelSlowProtoRowstatus RowStatus
}
l2ProtocolTunnelSlowProtoType OBJECT-TYPE
SYNTAX INTEGER
{
peer(0),
tunnel(1),
discard(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of l2 protocol action.
0 peer.
1 tunnel.
2 discard."
DEFVAL { peer }
::= { l2ProtocolTunnelSlowProtoEntry 1 }
l2ProtocolTunnelSlowProtoEvcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the evc entry."
::= { l2ProtocolTunnelSlowProtoEntry 2 }
l2ProtocolTunnelSlowProtoRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
In this node when Destroy the entry the default type peer will be used."
::= { l2ProtocolTunnelSlowProtoEntry 3 }
--
-- L2 protocol tunnel Stp set
--
l2ProtocolTunnelStpTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolTunnelStpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of Stp tunnel enable or not."
::= { l2protocol 9 }
l2ProtocolTunnelStpEntry OBJECT-TYPE
SYNTAX L2ProtocolTunnelStpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of Stp tunnel enable or not."
INDEX { interfaceIndex}
::= { l2ProtocolTunnelStpTable 1 }
L2ProtocolTunnelStpEntry ::=
SEQUENCE {
l2ProtocolTunnelStpType INTEGER,
l2ProtocolTunnelStpEvcName OCTET STRING,
l2ProtocolTunnelStpRowstatus RowStatus
}
l2ProtocolTunnelStpType OBJECT-TYPE
SYNTAX INTEGER
{
peer(0),
tunnel(1),
discard(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of l2 protocol action.
0 peer.
1 tunnel.
2 discard."
DEFVAL { peer }
::= { l2ProtocolTunnelStpEntry 1 }
l2ProtocolTunnelStpEvcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the evc entry."
::= { l2ProtocolTunnelStpEntry 2 }
l2ProtocolTunnelStpRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
In this node when Destroy the entry the default type peer will be used."
::= { l2ProtocolTunnelStpEntry 3 }
--
-- L2 protocol tunnel Cfm set
--
l2ProtocolTunnelCfmTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolTunnelCfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of Cfm tunnel enable or not."
::= { l2protocol 10 }
l2ProtocolTunnelCfmEntry OBJECT-TYPE
SYNTAX L2ProtocolTunnelCfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of Cfm tunnel enable or not."
INDEX { interfaceIndex}
::= { l2ProtocolTunnelCfmTable 1 }
L2ProtocolTunnelCfmEntry ::=
SEQUENCE {
l2ProtocolTunnelCfmType INTEGER,
l2ProtocolTunnelCfmEvcName OCTET STRING,
l2ProtocolTunnelCfmRowstatus RowStatus
}
l2ProtocolTunnelCfmType OBJECT-TYPE
SYNTAX INTEGER
{
peer(0),
tunnel(1),
discard(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of l2 protocol action.
0 peer.
1 tunnel.
2 discard."
DEFVAL { peer }
::= { l2ProtocolTunnelCfmEntry 1 }
l2ProtocolTunnelCfmEvcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the evc entry."
::= { l2ProtocolTunnelCfmEntry 2 }
l2ProtocolTunnelCfmRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
In this node when Destroy the entry the default type peer will be used."
::= { l2ProtocolTunnelCfmEntry 3 }
--
-- L2 protocol tunnel uplink enable
--
l2ProtocolTunnelUplinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolTunnelUplinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of uplink enable or not."
::= { l2protocol 11 }
l2ProtocolTunnelUplinkEntry OBJECT-TYPE
SYNTAX L2ProtocolTunnelUplinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information of uplink enable or not."
INDEX { interfaceIndex}
::= { l2ProtocolTunnelUplinkTable 1 }
L2ProtocolTunnelUplinkEntry ::=
SEQUENCE {
l2ProtocolTunnelUplinkEnable INTEGER,
l2ProtocolTunnelUplinkRowstatus RowStatus
}
l2ProtocolTunnelUplinkEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "l2protocol uplink enable or not."
DEFVAL { disable }
::= { l2ProtocolTunnelUplinkEntry 1 }
l2ProtocolTunnelUplinkRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
In this node when Destroy the entry the default type peer will be used."
::= { l2ProtocolTunnelUplinkEntry 2 }
--
-- L2 protocol Full-Mac set
--
l2ProtocolFullMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolFullMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of the all destination MAC."
::= { l2protocol 12 }
l2ProtocolFullMacEntry OBJECT-TYPE
SYNTAX L2ProtocolFullMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the destination MAC table."
INDEX { l2ProtocolFullMacIndex }
::= { l2ProtocolFullMacTable 1 }
L2ProtocolFullMacEntry ::=
SEQUENCE {
l2ProtocolFullMacIndex Integer32,
l2ProtocolFullMac MacAddress,
l2ProtocolFullMacRowstatus RowStatus
}
l2ProtocolFullMacIndex OBJECT-TYPE
SYNTAX Integer32 (0)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the full-mac entry. The value is 0 always"
::= { l2ProtocolFullMacEntry 1 }
l2ProtocolFullMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "L2 protocol MAC address, including all MAC addresses."
::= { l2ProtocolFullMacEntry 2 }
l2ProtocolFullMacRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active."
::= { l2ProtocolFullMacEntry 3 }
--
-- L2 protocol tunnel Full-Mac set
--
l2ProtocolTunnelFullMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF L2ProtocolTunnelFullMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of full-mac tunnel enable or not."
::= { l2protocol 13 }
l2ProtocolTunnelFullMacEntry OBJECT-TYPE
SYNTAX L2ProtocolTunnelFullMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The infomation of full-mac tunnel enable or not."
INDEX { interfaceIndex }
::= { l2ProtocolTunnelFullMacTable 1 }
L2ProtocolTunnelFullMacEntry ::=
SEQUENCE {
l2ProtocolTunnelFullMacType INTEGER,
l2ProtocolTunnelFullMacEvcName OCTET STRING,
l2ProtocolTunnelFullMacRowstatus RowStatus
}
l2ProtocolTunnelFullMacType OBJECT-TYPE
SYNTAX INTEGER
{
peer(0),
tunnel(1),
discard(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of l2 protocol action.
0 peer.
1 tunnel.
2 discard."
DEFVAL { peer }
::= { l2ProtocolTunnelFullMacEntry 1 }
l2ProtocolTunnelFullMacEvcName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the evc entry."
::= { l2ProtocolTunnelFullMacEntry 2 }
l2ProtocolTunnelFullMacRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
In this node when Destroy the entry the default type peer will be used."
::= { l2ProtocolTunnelFullMacEntry 3 }
-- Sub Module: loopback detect
loopbackDetectIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoopbackDetectIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure loopback detection on an interface."
::= { loopbackDetect 1 }
loopbackDetectIfEntry OBJECT-TYPE
SYNTAX LoopbackDetectIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of loopbackDetectIfTable."
INDEX { loopbackDetectIfIndex }
::= { loopbackDetectIfTable 1 }
LoopbackDetectIfEntry ::=
SEQUENCE {
loopbackDetectIfIndex Integer32,
loopbackDetectEnable INTEGER,
loopbackDetectAction INTEGER,
loopbackDetectStatus INTEGER
}
loopbackDetectIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface index."
::= { loopbackDetectIfEntry 1 }
loopbackDetectEnable OBJECT-TYPE
SYNTAX INTEGER {enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the loopback detect on a port.The meanings of the values are:
enable(1);disable(2)."
DEFVAL { disable }
::= { loopbackDetectIfEntry 2 }
loopbackDetectAction OBJECT-TYPE
SYNTAX INTEGER {shutdown(1), trap(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the action of the loopback detection.The meanings of the values are:
shutdown(1);trap(2)."
DEFVAL { trap }
::= { loopbackDetectIfEntry 3 }
loopbackDetectStatus OBJECT-TYPE
SYNTAX INTEGER {trap(1), shutdown(2), normal(3)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the status of the loopback detection.The meanings of the values are:
trap(1);shutdown(2);normal(3)."
DEFVAL { normal }
::= { loopbackDetectIfEntry 4 }
loopbackDetectPktInterval OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to configure loopback detection packet interval."
DEFVAL { 5 }
::= { loopbackDetect 2 }
loopbackDetectTrap OBJECT IDENTIFIER ::= { loopbackDetect 1000 }
loopbackDetectStatusNotify NOTIFICATION-TYPE
OBJECTS { loopbackDetectIfIndex, loopbackDetectStatus }
STATUS current
DESCRIPTION
"This trap will be generated when loopback status changed on an interface."
::= {loopbackDetectTrap 1}
-- Ipsla MIB Objects
ipslaCtrlAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaCtrlAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Basic configuration for ipsla"
::= { ipsla 1 }
ipslaCtrlAdminEntry OBJECT-TYPE
SYNTAX IpslaCtrlAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A base list of objects that define an ipsla object"
INDEX { ipslaCtrlAdminIndex }
::= { ipslaCtrlAdminTable 1 }
IpslaCtrlAdminEntry ::= SEQUENCE {
ipslaCtrlAdminIndex Integer32,
ipslaCtrlAdminDesc DisplayString,
ipslaCtrlAdminType Integer32,
ipslaCtrlAdminThreshold Integer32,
ipslaCtrlAdminFrequency Integer32,
ipslaCtrlAdminTimeout Integer32,
ipslaCtrlAdminInterval Integer32,
ipslaCtrlAdminPktsPerTest Integer32,
ipslaCtrlAdminTargetAddress OCTET STRING,
ipslaCtrlAdminSourceAddress OCTET STRING,
ipslaCtrlAdminSourceInterface OCTET STRING,
ipslaCtrlAdminStatus RowStatus
}
ipslaCtrlAdminIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ID of ipsla entry"
::= { ipslaCtrlAdminEntry 1 }
ipslaCtrlAdminDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which is used to describe an ipsla entry.
and will be inserted into trap notifications."
DEFVAL { "" }
::= { ipslaCtrlAdminEntry 2 }
ipslaCtrlAdminThreshold OBJECT-TYPE
SYNTAX Integer32 (1..4800000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the threshold value in millisecond for each icmp response"
DEFVAL { 5000 }
::= { ipslaCtrlAdminEntry 4 }
ipslaCtrlAdminFrequency OBJECT-TYPE
SYNTAX Integer32 (1..4800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the frequency value in second for each test"
DEFVAL { 60 }
::= { ipslaCtrlAdminEntry 5 }
ipslaCtrlAdminTimeout OBJECT-TYPE
SYNTAX Integer32 (1..4800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the timeout value in second for each icmp response"
DEFVAL { 5 }
::= { ipslaCtrlAdminEntry 6 }
ipslaCtrlAdminInterval OBJECT-TYPE
SYNTAX Integer32 (1..4800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the interval value in second for two icmp request in a test"
DEFVAL { 6 }
::= { ipslaCtrlAdminEntry 7 }
ipslaCtrlAdminPktsPerTest OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the number of trasmitted icmp request in a test"
DEFVAL { 3 }
::= { ipslaCtrlAdminEntry 8 }
ipslaCtrlAdminTargetAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the destination address for icmp request"
::= { ipslaCtrlAdminEntry 9 }
ipslaCtrlAdminSourceAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the source address for icmp request"
::= { ipslaCtrlAdminEntry 10 }
ipslaCtrlAdminSourceInterface OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the source interface for icmp request"
::= { ipslaCtrlAdminEntry 11 }
ipslaCtrlAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description: The status of this conceptual row. Now only realize CreateAndGo
and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy"
::= { ipslaCtrlAdminEntry 12 }
-- ipsla icmp-echo Table
ipslaEchoAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaEchoAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains icmp-echo specific definitions."
::= { ipsla 2 }
ipslaEchoAdminEntry OBJECT-TYPE
SYNTAX IpslaEchoAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define specific configuration for icmp-echo."
INDEX { ipslaCtrlAdminIndex }
::= { ipslaEchoAdminTable 1 }
IpslaEchoAdminEntry ::= SEQUENCE {
ipslaEchoAdminDataSize Integer32,
ipslaEchoAdminDataPattern OCTET STRING,
ipslaEchoAdminTOS Integer32,
ipslaEchoAdminTTL Integer32,
ipslaEchoAdminFailPercent Integer32,
ipslaEchoAdminVrfName DisplayString,
ipslaEchoAdminTestStatsNum Integer32,
ipslaEchoAdminPktStatsNum Integer32
}
ipslaEchoAdminDataSize OBJECT-TYPE
SYNTAX Integer32 (0..8100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure size of payload in icmp packet"
DEFVAL { 28 }
::= { ipslaEchoAdminEntry 1 }
ipslaEchoAdminDataPattern OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the pattern (hex string) of content in icmp payload"
DEFVAL { "ABCDABCD" }
::= { ipslaEchoAdminEntry 2 }
ipslaEchoAdminTOS OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the value of tos in icmp packet"
DEFVAL { 0 }
::= { ipslaEchoAdminEntry 3 }
ipslaEchoAdminTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the value of ttl in icmp packet"
DEFVAL { 64 }
::= { ipslaEchoAdminEntry 4 }
ipslaEchoAdminFailPercent OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the failure percent for a test"
DEFVAL { 100 }
::= { ipslaEchoAdminEntry 5 }
ipslaEchoAdminVrfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the vrf for ipsla entry"
DEFVAL { "" }
::= { ipslaEchoAdminEntry 6 }
ipslaEchoAdminTestStatsNum OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the recorded number of test statistics for a ipsla entry"
DEFVAL { 5 }
::= { ipslaEchoAdminEntry 7 }
ipslaEchoAdminPktStatsNum OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the recorded number of packet statistics for a ipsla entry"
DEFVAL { 50 }
::= { ipslaEchoAdminEntry 8 }
-- Schedule Administration Table
ipslaScheduleAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaScheduleAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of ipsla scheduling specific definitions."
::= { ipsla 3 }
ipslaScheduleAdminEntry OBJECT-TYPE
SYNTAX IpslaScheduleAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define specific configuration for
the scheduling of ipsla."
INDEX { ipslaCtrlAdminIndex }
::= { ipslaScheduleAdminTable 1 }
IpslaScheduleAdminEntry ::= SEQUENCE {
ipslaScheduleAdminStatus Integer32
}
ipslaScheduleAdminStatus OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure to enable the ipsla entry:
0 means disable
1 means enable"
DEFVAL{0}
::= { ipslaScheduleAdminEntry 1 }
-- Test show Table
ipslaTestStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaTestStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The test statistics table"
::= { ipsla 4 }
ipslaTestStatsEntry OBJECT-TYPE
SYNTAX IpslaTestStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that describe results for
test statistics rows."
INDEX { ipslaTestEntryId,
ipslaTestStatsIndex }
::= { ipslaTestStatsTable 1 }
IpslaTestStatsEntry ::= SEQUENCE {
ipslaTestEntryId Integer32,
ipslaTestStatsIndex Integer32,
ipslaTestTransmitted Counter32,
ipslaTestReceived Counter32,
ipslaTestOverthreshold Counter32,
ipslaTestRttMax Integer32,
ipslaTestRttMin Integer32,
ipslaTestRttAvg Integer32,
ipslaTestLastTransmitted DateAndTime,
ipslaTestPktLossRatio Integer32,
ipslaTestResult Integer32
}
ipslaTestEntryId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ID of ipsla entry"
::= { ipslaTestStatsEntry 1 }
ipslaTestStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the test in the results"
::= { ipslaTestStatsEntry 2 }
ipslaTestTransmitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the number of packets transmitted in the test"
::= { ipslaTestStatsEntry 3 }
ipslaTestReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the number of packets received in the test"
::= { ipslaTestStatsEntry 4 }
ipslaTestOverthreshold OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the number of overthreshold packets received in the test"
::= { ipslaTestStatsEntry 5 }
ipslaTestRttMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the max value of RTT (Round Trip Time) among all received packet in a test"
::= { ipslaTestStatsEntry 6 }
ipslaTestRttMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the minimum value of RTT (Round Trip Time) among all received packet in a test"
::= { ipslaTestStatsEntry 7 }
ipslaTestRttAvg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the average value of RTT (Round Trip Time) among all received packet in a test"
::= { ipslaTestStatsEntry 8 }
ipslaTestLastTransmitted OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show send time of last packet in a test"
::= { ipslaTestStatsEntry 9 }
ipslaTestPktLossRatio OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show packet loss ratio of a test"
::= { ipslaTestStatsEntry 10 }
ipslaTestResult OBJECT-TYPE
SYNTAX Integer32(1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the result of a test:
1 means success
2 means failure"
::= { ipslaTestStatsEntry 11 }
-- pkt show Table
ipslaPktStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaPktStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The packet statistics table "
::= { ipsla 5 }
ipslaPktStatsEntry OBJECT-TYPE
SYNTAX IpslaPktStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that describe results for
packet statistics rows."
INDEX { ipslaPktEntryId,
ipslaPktStatsIndex }
::= { ipslaPktStatsTable 1 }
IpslaPktStatsEntry ::= SEQUENCE {
ipslaPktEntryId Integer32,
ipslaPktStatsIndex Integer32,
ipslaPktTestId Integer32,
ipslaPktIndex Integer32,
ipslaPktRtt Integer32,
ipslaPktResult Integer32,
ipslaPktSendTime DateAndTime
}
ipslaPktEntryId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ID of ipsla entry"
::= { ipslaPktStatsEntry 1 }
ipslaPktStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of the packet in the results"
::= { ipslaPktStatsEntry 2 }
ipslaPktTestId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the ID of test which the packet is belong to "
::= { ipslaPktStatsEntry 3 }
ipslaPktIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the index of packet in the test"
::= { ipslaPktStatsEntry 4 }
ipslaPktRtt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the RTT of the packet"
::= { ipslaPktStatsEntry 5 }
ipslaPktResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the result of the packet:
0 means timeout
1 means success
3 means sendfail"
::= { ipslaPktStatsEntry 6 }
ipslaPktSendTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Show the time of the packet transmitted"
::= { ipslaPktStatsEntry 7 }
ipslaTrapEnable OBJECT-TYPE
SYNTAX BITS {
testfailure(0),
packettimeout(1),
testsuccess(2),
overthreshold(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the trap of special type"
::= { ipsla 6 }
-- trap Table
ipslaTrap OBJECT IDENTIFIER
::= { ipsla 7 }
ipslaTestFailure NOTIFICATION-TYPE
OBJECTS {
ipslaCtrlAdminIndex,
ipslaCtrlAdminDesc,
ipslaCtrlAdminTargetAddress,
ipslaPktTestId,
ipslaTestTransmitted,
ipslaTestReceived,
ipslaTestOverthreshold,
ipslaTestRttMax,
ipslaTestRttMin,
ipslaTestRttAvg,
ipslaTestLastTransmitted,
ipslaTestPktLossRatio,
ipslaEchoAdminFailPercent
}
STATUS current
DESCRIPTION
"Trap for a failed test"
::= { ipslaTrap 1 }
ipslaPktTimeout NOTIFICATION-TYPE
OBJECTS {
ipslaCtrlAdminIndex,
ipslaCtrlAdminDesc,
ipslaCtrlAdminTargetAddress,
ipslaPktTestId,
ipslaPktIndex,
ipslaCtrlAdminTimeout
}
STATUS current
DESCRIPTION
"Trap for a timeout icmp request"
::= { ipslaTrap 2 }
ipslaTestSuccess NOTIFICATION-TYPE
OBJECTS {
ipslaCtrlAdminIndex,
ipslaCtrlAdminDesc,
ipslaCtrlAdminTargetAddress,
ipslaPktTestId,
ipslaTestTransmitted,
ipslaTestReceived,
ipslaTestOverthreshold,
ipslaTestRttMax,
ipslaTestRttMin,
ipslaTestRttAvg,
ipslaTestLastTransmitted,
ipslaTestPktLossRatio,
ipslaEchoAdminFailPercent
}
STATUS current
DESCRIPTION
"Trap for a successful test"
::= { ipslaTrap 3 }
ipslaPktOverthreshold NOTIFICATION-TYPE
OBJECTS {
ipslaCtrlAdminIndex,
ipslaCtrlAdminDesc,
ipslaCtrlAdminTargetAddress,
ipslaPktTestId,
ipslaPktIndex,
ipslaCtrlAdminThreshold,
ipslaPktRtt
}
STATUS current
DESCRIPTION
"Trap for a overthreshold icmp response"
::= { ipslaTrap 4 }
END