mibs/hp/BLADETYPE4-NETWORK-MIB
-- ----------------------------------------------------------------------------
-- File Main Owner:
-- File Peer Owner:
-- File Description: Main entry point to build private MIBs.
--
--
-- { COPYRIGHT / HISTORY
--
--
--
-- PORTING HISTORY
--
-- } COPYRIGHT / HISTORY (end)
--
-- ----------------------------------------------------------------------------
-- { INSERT: hpRoot
-- ----------------------------------------------------------------------------
BLADETYPE4-NETWORK-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, Integer32, Unsigned32, Counter32, Gauge32,
Counter64, TimeTicks, IpAddress
FROM SNMPv2-SMI
DisplayString, PhysAddress, MacAddress
FROM SNMPv2-TC
BridgeId
FROM BRIDGE-MIB
sysName, sysLocation, sysContact, ifIndex
FROM RFC1213-MIB
enterprises
FROM RFC1155-SMI
hpSwitchBladeType4-Products,
hpSwitchBladeType4-Mgmt
FROM HP-SWITCH-PL-MIB;
-- SysObjId for GbE2c Interconnect Switch (1.3.6.1.4.1.11.2.3.7.11.33.4.1.1)
hpProLiant-GbE2c-InterconnectSwitch OBJECT IDENTIFIER
::= { hpSwitchBladeType4-Products 1 }
-------------------------------------------------------------------------------
-- HP Platform Common Private MIBs
-------------------------------------------------------------------------------
agent OBJECT IDENTIFIER
::= { hpSwitchBladeType4-Mgmt 1 }
-- ----------------------------------------------------------------------------
-- { INSERT: bt2Switch
-- ----------------------------------------------------------------------------
agentConfig OBJECT IDENTIFIER ::= { agent 1 }
agentStats OBJECT IDENTIFIER ::= { agent 2 }
agentInfo OBJECT IDENTIFIER ::= { agent 3 }
agentOper OBJECT IDENTIFIER ::= { agent 4 }
agSystem OBJECT IDENTIFIER ::= { agentConfig 1 }
agPortConfig OBJECT IDENTIFIER ::= { agentConfig 2 }
agRadiusConfig OBJECT IDENTIFIER ::= { agentConfig 3 }
agNTP OBJECT IDENTIFIER ::= { agentConfig 4 }
agSyslog OBJECT IDENTIFIER ::= { agentConfig 5 }
agTransfer OBJECT IDENTIFIER ::= { agentConfig 7 }
agApply OBJECT IDENTIFIER ::= { agentConfig 8 }
agTacacsConfig OBJECT IDENTIFIER ::= { agentConfig 10 }
agMgmtNetConfig OBJECT IDENTIFIER ::= { agentConfig 11 }
agAccess OBJECT IDENTIFIER ::= { agentConfig 12 }
agSSHConfig OBJECT IDENTIFIER ::= { agentConfig 13 }
pktStats OBJECT IDENTIFIER ::= { agentStats 1 }
mpCpuStats OBJECT IDENTIFIER ::= { agentStats 2 }
portStats OBJECT IDENTIFIER ::= { agentStats 3 }
agClearStats OBJECT IDENTIFIER ::= { agentStats 7 }
ntpStats OBJECT IDENTIFIER ::= { agentStats 9 }
aclStats OBJECT IDENTIFIER ::= { agentStats 12 }
hardware OBJECT IDENTIFIER ::= { agentInfo 1 }
portInfo OBJECT IDENTIFIER ::= { agentInfo 2 }
agDiff OBJECT IDENTIFIER ::= { agentInfo 4 }
agCfgDump OBJECT IDENTIFIER ::= { agentInfo 5 }
geaportInfo OBJECT IDENTIFIER ::= { agentInfo 7 }
ufdInfo OBJECT IDENTIFIER ::= { agentInfo 8 }
sfpInfo OBJECT IDENTIFIER ::= { agentInfo 9 }
agNTPOper OBJECT IDENTIFIER ::= { agentOper 2 }
-- There are two configuration blocks for Bladetype2 switches.
-- The "current_config" reflects the configuration parameters that the
-- switch is operating on and it is read-only. The objects with "CurCfg"
-- in the name are reflect to this configuration block.
--
-- The "new_config" accepts user configurations on set. The objects with
-- "NewCfg" in the name are reflect to this configuration block.
--
-- The newly set configurations will not take effect until a "apply"
-- command has been issued (See agApplyConfiguration object defined in
-- BLADETYPE2-SWITCH-MIB).
--
-- The newly set configurations will not be saved through next restarting
-- of the switch unless a "save" command has been issued (See
-- agSaveConfiguration object defined in BLADETYPE2-SWITCH-MIB).
-- Hardware Information
hwPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware part number of the Bladetype2 Switch."
::= { hardware 1 }
hwRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware revision. If the revision is not
available, a zero length string should be returned."
::= { hardware 2 }
hwSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch serial number."
::= { hardware 5 }
-- Port operation table
agPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port operations."
::= { agentOper 1 }
agPortOperTableEntry OBJECT-TYPE
SYNTAX AgPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port operations table."
INDEX { portOperIdx }
::= { agPortOperTable 1 }
AgPortOperTableEntry ::=
SEQUENCE {
portOperIdx Integer32,
portOperState INTEGER
,portOperRmon INTEGER
}
portOperIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { agPortOperTableEntry 1 }
portOperState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable port."
::= { agPortOperTableEntry 2 }
portOperRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable RMON for port."
::= { agPortOperTableEntry 3 }
--portOperDot1x OBJECT IDENTIFIER ::= { agPortOperTableEntry 4 }
portOperDot1xTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOperDot1xTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port operations."
::= { agentOper 3 }
portOperDot1xTableEntry OBJECT-TYPE
SYNTAX PortOperDot1xTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port 802.1x operation table."
INDEX { portOperDot1xIndx }
::= { portOperDot1xTable 1 }
PortOperDot1xTableEntry ::= SEQUENCE {
portOperDot1xIndx Integer32,
portOperDot1xReset INTEGER,
portOperDot1xReauth INTEGER
}
portOperDot1xIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portOperDot1xTableEntry 1 }
portOperDot1xReset OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reinitialize 802.1x access control on port."
::= { portOperDot1xTableEntry 2 }
portOperDot1xReauth OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initiate reauthentication on port."
::= { portOperDot1xTableEntry 3 }
-- NTP operation
ntpOperSendReq OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the user to send requests to the NTP server."
::= { agNTPOper 1 }
-- Port information table
portInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port information."
::= { portInfo 1 }
portInfoTableEntry OBJECT-TYPE
SYNTAX PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port information table."
INDEX { portInfoIndx }
::= { portInfoTable 1 }
PortInfoTableEntry ::= SEQUENCE {
portInfoIndx Integer32,
portInfoSpeed INTEGER,
portInfoMode INTEGER,
portInfoFlowCtrl INTEGER,
portInfoLink INTEGER,
portInfoPhyIfDescr DisplayString,
portInfoPhyIfType INTEGER,
portInfoPhyIfMtu Integer32,
portInfoPhyIfPhysAddress PhysAddress,
portInfoPhyIfOperStatus INTEGER,
portInfoPhyIfLastChange TimeTicks
,portInfoMedia INTEGER
}
portInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portInfoTableEntry 1 }
portInfoSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
mbs1000(4),
any(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational speed of the port."
::= { portInfoTableEntry 2 }
portInfoMode OBJECT-TYPE
SYNTAX INTEGER {
full-duplex(2),
half-duplex(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational mode of the port."
::= { portInfoTableEntry 3 }
portInfoFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational flow control of the port."
::= { portInfoTableEntry 4 }
portInfoLink OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3),
inoperative(4) -- unrecognized PCI device
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational link status of the port."
::= { portInfoTableEntry 5 }
portInfoPhyIfDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface."
::= { portInfoTableEntry 6 }
portInfoPhyIfType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
regular1822(2),
hdh1822(3),
ddn-x25(4),
rfc877-x25(5),
ethernet-csmacd(6),
iso88023-csmacd(7),
iso88024-tokenBus(8),
iso88025-tokenRing(9),
iso88026-man(10),
starLan(11),
proteon-10Mbit(12),
proteon-80Mbit(13),
hyperchannel(14),
fddi(15),
lapb(16),
sdlc(17),
ds1(18), -- T-1
e1(19), -- european equiv. of T-1
basicISDN(20),
primaryISDN(21), -- proprietary serial
propPointToPointSerial(22),
ppp(23),
softwareLoopback(24),
eon(25), -- CLNP over IP [11]
ethernet-3Mbit(26),
nsip(27), -- XNS over IP
slip(28), -- generic SLIP
ultra(29), -- ULTRA technologies
ds3(30), -- T-3
sip(31), -- SMDS
frame-relay(32)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack."
::= { portInfoTableEntry 7 }
portInfoPhyIfMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface."
::= { portInfoTableEntry 8 }
portInfoPhyIfPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length."
::= { portInfoTableEntry 9 }
portInfoPhyIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed."
::= { portInfoTableEntry 10 }
portInfoPhyIfLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value."
::= { portInfoTableEntry 11 }
portInfoMedia OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port media."
::= { portInfoTableEntry 12 }
-- Agent System Group
-- This group of objects take effect on the 'SET' request.
-- There is no need to 'apply' or 'save'.
agApplyConfiguration OBJECT-TYPE
SYNTAX INTEGER {
other(1),
apply(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the new_config block.
other(1) is returned when this object ie read. "
::= { agSystem 2 }
agSavePending OBJECT-TYPE
SYNTAX INTEGER {
saveNeeded(1),
noSaveNeeded(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash."
::= { agSystem 3 }
agSaveConfiguration OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
saveActive(2),
notSaveActive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read."
::= { agSystem 4 }
agRevert OBJECT-TYPE
SYNTAX INTEGER {
other(1),
revert(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy the current_config to the new_config block.
other(1) is returned when this object is read. "
::= { agSystem 5 }
agRevertApply OBJECT-TYPE
SYNTAX INTEGER {
other(1),
revertApply(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read. "
::= { agSystem 6 }
agReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
coldReset(2),
warmReset(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reboot the switch.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)..."
::= { agSystem 7 }
agConfigForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
active(2),
backup(3),
default(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block"
::= { agSystem 8 }
agImageForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2"
::= { agSystem 9 }
agSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available."
::= { agSystem 10 }
agBootVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available."
::= { agSystem 11 }
agImage1Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { agSystem 12 }
agImage2Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { agSystem 13 }
agRtcDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available."
::= { agSystem 14 }
agRtcTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available."
::= { agSystem 15 }
agLastSetErrorReason OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error reason of the last SET failure."
::= { agSystem 16 }
agCurCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the current_configuration block."
::= { agSystem 17 }
agNewCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the new_configuration block."
::= { agSystem 18 }
agCurCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..79))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user defined login banner."
::= { agSystem 19 }
agNewCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..79))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user defined login banner."
::= { agSystem 20 }
agCurCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agSystem 23 }
agNewCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agSystem 24 }
agCurCfgBootp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of BootP, as currently configured in the
current_configuration block."
::= { agSystem 29 }
agNewCfgBootp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of BootP, in the new_configuration block."
::= { agSystem 30 }
agSlotNumber OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning."
::= { agSystem 31 }
agCurCfgSnmpTimeout OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user."
::= { agSystem 32 }
agNewCfgSnmpTimeout OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user."
::= { agSystem 33 }
agCurCfgTelnetServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the telnet server listens for telnet
sessions."
::= { agSystem 34 }
agNewCfgTelnetServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the telnet server listens for telnet
sessions."
::= { agSystem 35 }
agClearFlashDump OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to clear the FLASH dump.
ok(1) is returned when this object is read. "
::= { agSystem 36 }
agRackId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rack unique identifier."
::= { agSystem 37 }
agChassis OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis serial number."
::= { agSystem 38 }
agCurCfgTftpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the TFTP server is listening to
in the current_configuration block."
::= { agSystem 39 }
agNewCfgTftpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the TFTP server is listening to
in the new_configuration block."
::= { agSystem 40 }
agCurCfgHttpsServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the HTTPS server is listening to
in the current_configuration block."
::= { agSystem 49 }
agNewCfgHttpsServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the HTTPS server is listening to
in the new_configuration block."
::= { agSystem 50 }
agCurDaylightSavings OBJECT-TYPE
SYNTAX INTEGER {
none(0),
africa-Algeria(1),
africa-Angola(2),
africa-Benin(3),
africa-Botswana(4),
africa-Burkina-Faso(5),
africa-Burundi(6),
africa-Cameroon(7),
africa-Central-African-Rep(8),
africa-Chad(9),
africa-Congo-WestDemRepCongo(10),
africa-Congo-EastDemRepCongo(11),
africa-Congo-Rep(12),
africa-Cote-dIvoire(13),
africa-Djibouti(14),
africa-Egypt(15),
africa-Equatorial-Guinea(16),
africa-Eritrea(17),
africa-Ethiopia(18),
africa-Gabon(19),
africa-Gambia(20),
africa-Ghana(21),
africa-Guinea(22),
africa-Guinea-Bissau(23),
africa-Kenya(24),
africa-Lesotho(25),
africa-Liberia(26),
africa-Libya(27),
africa-Malawi(28),
africa-Mali-SouthWestMali(29),
africa-Mali-NorthEastMali(30),
africa-Mauritania(31),
africa-Morocco(32),
africa-Mozambique(33),
africa-Namibia(34),
africa-Niger(35),
africa-Nigeria(36),
africa-Rwanda(37),
africa-SaoTome-And-Principe(38),
africa-Senegal(39),
africa-SierraLeone(40),
africa-Somalia(41),
africa-SouthAfrica(42),
africa-Spain-Mainland(43),
africa-Spain-CeutaMelilla(44),
africa-Spain-CanaryIslands(45),
africa-Sudan(46),
africa-Swaziland(47),
africa-Tanzania(48),
africa-Togo(49),
africa-Tunisia(50),
africa-Uganda(51),
africa-Western-Sahara(52),
africa-Zambia(53),
africa-Zimbabwe(54),
americas-Anguilla(55),
americas-Antigua-Barbuda(56),
americas-Argentina-EArgentina(57),
americas-Argentina-MostLocations(58),
americas-Argentina-Jujuy(59),
americas-Argentina-Catamarca(60),
americas-Argentina-Mendoza(61),
americas-Aruba(62),
americas-Bahamas(63),
americas-Barbados(64),
americas-Belize(65),
americas-Bolivia(66),
americas-Brazil-AtlanticIslands(67),
americas-Brazil-AmapaEPara(68),
americas-Brazil-NEBrazil(69),
americas-Brazil-Pernambuco(70),
americas-Brazil-Tocantins(71),
americas-Brazil-AlagoasSergipe(72),
americas-Brazil-SSEBrazil(73),
americas-Brazil-MatoGrossoDoSul(74),
americas-Brazil-WParaRondonia(75),
americas-Brazil-Roraima(76),
americas-Brazil-EAmazonas(77),
americas-Brazil-WAmazonas(78),
americas-Brazil-Acre(79),
americas-Canada-NewfoundlandIsland(80),
americas-Canada-AtlanTime-NovaScotia(81),
americas-Canada-AtlanTime-ELabrador(82),
americas-Canada-EastTime-OntarioMostlocation(83),
americas-Canada-EastTime-ThunderBay(84),
americas-Canada-EastStdTime-PangnirtungNunavut(85),
americas-Canada-EastStdTime-EastNunavut(86),
americas-Canada-EastStdTime-CenNunavut(87),
americas-Canada-CenTime-ManitobaWestOntario(88),
americas-Canada-CenTime-RainyRiver(89),
americas-Canada-CenTime-WestNunavut(90),
americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
americas-Canada-CenStdTime-SaskatchewanMidwest(92),
americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
americas-Canada-MountTime-CentralNorthwestTerritories(94),
americas-Canada-MountTime-WestNorthwestTerritories(95),
americas-Canada-MountStdTime-EastBritishColumbia(96),
americas-Canada-PacificTime-WestBritishColumbia(97),
americas-Canada-PacificTime-SouthYukon(98),
americas-Canada-PacificTime-NorthYukon(99),
americas-CaymanIslands(100),
americas-Chile-MostLocation(101),
americas-Chile-EasterIsland(102),
americas-Colombia(103),
americas-CostaRica(104),
americas-Cuba(105),
americas-Dominica(106),
americas-DominicanRepublic (107),
americas-Ecuador(108),
americas-ElSalvado(109),
americas-FrenchGuiana(110),
americas-Greenland-MostLocation(111),
americas-Greenland-EastCoastNorthScoresbysund(112),
americas-Greenland-ScoresbysundIttoqqortoormiit(113),
americas-Greenland-ThulePituffik(114),
americas-Grenada(115),
americas-Guadeloupe(116),
americas-Guatemala(117),
americas-Guyana(118),
americas-Haiti(119),
americas-Honduras(120),
americas-Jamaica(121),
americas-Martinique(122),
americas-Mexico-CentTime-Mostlocations(123),
americas-Mexico-CentTime-QuintanaRoo(124),
americas-Mexico-CentTime-CampecheYucatan(125),
americas-Mexico-CentTime-CoahDurangoNLTamaulipas(126),
americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
americas-Mexico-MountTime-Chihuahua(128),
americas-Mexico-MountStdTime-Sonora(129),
americas-Mexico-PacificTime(130),
americas-Montserrat(131),
americas-NetherlandsAntilles(132),
americas-Nicaragua(133),
americas-Panama(134),
americas-Paraguay(135),
americas-Peru(136),
americas-PuertoRico(137),
americas-StKittsAndNevis(138),
americas-StLucia(139),
americas-StPierreAndMiquelon(140),
americas-StVincent(141),
americas-Suriname(142),
americas-TrinidadAndTobago(143),
americas-TurksAndCaicosIs(144),
americas-USA-EastTime(145),
americas-USA-EastTime-MichiganMostLocation(146),
americas-USA-EastTime-KentuckyLouisvilleArea(147),
americas-USA-EastTime-KentuckyWayneCounty(148),
americas-USA-EastStdTime-IndianaMostLocations(149),
americas-USA-EastStdTime-IndianaCrawfordCounty(150),
americas-USA-EastStdTime-IndianaStarkeCounty(151),
americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
americas-USA-CentTime(153),
americas-USA-CentTime-MichiganWisconsinborder(154),
americas-USA-CentTime-NorthDakotaOliverCounty(155),
americas-USA-MountTime(156),
americas-USA-MountTime-SouthIdahoAndEastOregon(157),
americas-USA-MountTime-Navajo(158),
americas-USA-MountStdTime-Arizona(159),
americas-USA-PacificTime(160),
americas-USA-AlaskaTime(161),
americas-USA-AlaskaTime-AlaskaPanhandle(162),
americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
americas-USA-AlaskaTime-WestAlaska(164),
americas-USA-AleutianIslands(165),
americas-USA-Hawaii(166),
americas-Uruguay(167),
americas-Venezuela(168),
americas-VirginIslands-UK(169),
americas-VirginIslands-US(170),
antarctica-McMurdoStationRossIsland(171),
antarctica-Amundsen-ScottStationSouthPole(172),
antarctica-PalmerStationAnversIsland(173),
antarctica-MawsonStationHolmeBay(174),
antarctica-DavisStationVestfoldHills(175),
antarctica-CaseyStationBaileyPeninsula(176),
antarctica-VostokStationSMagneticPole(177),
antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
antarctica-SyowaStationEOngulI(179),
arcticOcean-Svalbard(180),
arcticOcean-JanMayen(181),
asia-Afghanistan(182),
asia-Armenia(183),
asia-Azerbaijan(184),
asia-Bahrain(185),
asia-Bangladesh(186),
asia-Bhutan(187),
asia-Brunei(188),
asia-Cambodia(189),
asia-China-EastChinaBeijingGuangdongShanghai(190),
asia-China-Heilongjiang(191),
asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
asia-China-TibetmostofXinjiangUyghur(193),
asia-China-SouthwestXinjiangUyghur(194),
asia-Cyprus(195),
asia-EastTimor(196),
asia-Georgia(197),
asia-HongKong(198),
asia-India(199),
asia-Indonesia-JavaAndSumatra(200),
asia-Indonesia-WestCentralBorneo(201),
asia-Indonesia-EastSouthBorneoBaliWestTimor(202),
asia-Indonesia-IrianJayaAndMoluccas(203),
asia-Iran(204),
asia-Iraq(205),
asia-Israel(206),
asia-Japan(207),
asia-Jordan(208),
asia-Kazakhstan-MostLocations(209),
asia-Kazakhstan-QyzylordaKyzylorda(210),
asia-Kazakhstan-Aqtobe(211),
asia-Kazakhstan-AtyrauMangghystau(212),
asia-Kazakhstan-WestKazakhstan(213),
asia-Korea-North(214),
asia-Korea-South(215),
asia-Kuwait(216),
asia-Kyrgyzstan(217),
asia-Laos(218),
asia-Lebanon(219),
asia-Macau(220),
asia-Malaysia-PeninsularMalaysia(221),
asia-Malaysia-SabahSarawak(222),
asia-Mongolia-MostLocations(223),
asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
asia-Mongolia-DornodSukhbaatar(225),
asia-Myanmar(226),
asia-Nepal(227),
asia-Oman(228),
asia-Pakistan(229),
asia-Palestine(230),
asia-Philippines(231),
asia-Qatar(232),
asia-Russia-Moscow-01Kaliningrad(233),
asia-Russia-Moscow00WestRussia(234),
asia-Russia-Moscow01CaspianSea(235),
asia-Russia-Moscow02Urals(236),
asia-Russia-Moscow03WestSiberia(237),
asia-Russia-Moscow03Novosibirsk(238),
asia-Russia-Moscow04YeniseiRiver(239),
asia-Russia-Moscow05LakeBaikal(240),
asia-Russia-Moscow06LenaRiver(241),
asia-Russia-Moscow07AmurRiver(242),
asia-Russia-Moscow07SakhalinIsland(243),
asia-Russia-Moscow08Magadan(244),
asia-Russia-Moscow09Kamchatka(245),
asia-Russia-Moscow10BeringSea(246),
asia-SaudiArabia(247),
asia-Singapore(248),
asia-SriLanka(249),
asia-Syria(250),
asia-Taiwan(251),
asia-Tajikistan(252),
asia-Thailand(253),
asia-Turkmenistan(254),
asia-UnitedArabEmirates(255),
asia-Uzbekistan-WestUzbekistan(256),
asia-Uzbekistan-EastUzbekistan(257),
asia-Vietnam(258),
asia-Yemen(259),
atlanticOcean-Bermuda(260),
atlanticOcean-CapeVerde(261),
atlanticOcean-FaeroeIslands(262),
atlanticOcean-FalklandIslands(263),
atlanticOcean-Iceland(264),
atlanticOcean-Portugal-Mainland(265),
atlanticOcean-Portugal-MadeiraIslands(266),
atlanticOcean-Portugal-Azores(267),
atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
atlanticOcean-Spain-Mainland(269),
atlanticOcean-Spain-CeutaMelilla(270),
atlanticOcean-Spain-CanaryIslands(271),
atlanticOcean-StHelena(272),
atlanticOcean-Svalbard-JanMayen(273),
australia-LordHoweIsland(274),
australia-Tasmania(275),
australia-Victoria(276),
australia-NewSouthWales-MostLocations(277),
australia-NewSouthWales-Yancowinna(278),
australia-Queensland-MostLocations(279),
australia-Queensland-HolidayIslands(280),
australia-SouthAustralia(281),
australia-NorthernTerritory(282),
australia-WesternAustralia(283),
europe-Albania(284),
europe-Andorra(285),
europe-Austria(286),
europe-Belarus(287),
europe-Belgium(288),
europe-BosniaHerzegovina(289),
europe-Britain-UKGreatBritain(290),
europe-Britain-UKNorthernIreland(291),
europe-Bulgaria(292),
europe-Croatia(293),
europe-CzechRepublic(294),
europe-Denmark(295),
europe-Estonia(296),
europe-Finland(297),
europe-France(298),
europe-Germany(299),
europe-Gibraltar(300),
europe-Greece(301),
europe-Hungary(302),
europe-Ireland(303),
europe-Italy(304),
europe-Latvia(305),
europe-Liechtenstein(306),
europe-Lithuania(307),
europe-Luxembourg(308),
europe-Macedonia(309),
europe-Malta(310),
europe-Moldova(311),
europe-Monaco(312),
europe-Netherlands(313),
europe-Norway(314),
europe-Poland(315),
europe-Portugal-Mainland(316),
europe-Portugal-MadeiraIslands(317),
europe-Portugal-Azores(318),
europe-Romania(319),
europe-Russia-Moscow-01Kaliningrad(320),
europe-Russia-Moscow00WestRussia(321),
europe-Russia-Moscow01CaspianSea(322),
europe-Russia-Moscow02Urals(323),
europe-Russia-Moscow03WestSiberia(324),
europe-Russia-Moscow03Novosibirsk(325),
europe-Russia-Moscow04YeniseiRiver(326),
europe-Russia-Moscow05LakeBaikal(327),
europe-Russia-Moscow06LenaRiver(328),
europe-Russia-Moscow07AmurRiver(329),
europe-Russia-Moscow07SakhalinIsland(330),
europe-Russia-Moscow08Magadan(331),
europe-Russia-Moscow09Kamchatka(332),
europe-Russia-Moscow10BeringSea(333),
europe-SanMarino(334),
europe-Slovakia(335),
europe-Slovenia(336),
europe-Spain-Mainland(337),
europe-Spain-CeutaAndMelilla(338),
europe-Spain-CanaryIslands(339),
europe-Sweden(340),
europe-Switzerland(341),
europe-Turkey(342),
europe-Ukraine-MostLocations(343),
europe-Ukraine-Ruthenia(344),
europe-Ukraine-Zaporozhye-ELugansk(345),
europe-Ukraine-CentralCrimea(346),
europe-VaticanCity(347),
europe-Yugoslavia(348),
indianOcean-BritishIndianOceanTerritory(349),
indianOcean-ChristmasIsland(350),
indianOcean-CocosOrKeelingIslands(351),
indianOcean-Comoros(352),
indianOcean-FrenchSouthernAndAntarcticLands(353),
indianOcean-Madagascar(354),
indianOcean-Maldives(355),
indianOcean-Mauritius(356),
indianOcean-Mayotte(357),
indianOcean-Reunion(358),
indianOcean-Seychelles(359),
pacificOcean-Chile-MostLocations(360),
pacificOcean-Chile-EasterIslandSalayGomez(361),
pacificOcean-CookIslands(362),
pacificOcean-Ecuador(363),
pacificOcean-Fiji(364),
pacificOcean-FrenchPolynesia-SocietyIslands(365),
pacificOcean-FrenchPolynesia-MarquesasIslands(366),
pacificOcean-FrenchPolynesia-GambierIslands(367),
pacificOcean-Guam(368),
pacificOcean-Kiribati-GilbertIslands(369),
pacificOcean-Kiribati-PhoenixIslands(370),
pacificOcean-Kiribati-LineIslands(371),
pacificOcean-MarshallIslands-MostLocations(372),
pacificOcean-MarshallIslands-Kwajalein(373),
pacificOcean-Micronesia-Yap(374),
pacificOcean-Micronesia-TrukOrChuuk(375),
pacificOcean-Micronesia-PonapeOrPohnpei(376),
pacificOcean-Micronesia-Kosrae(377),
pacificOcean-Nauru(378),
pacificOcean-NewCaledonia(379),
pacificOcean-NewZealand-MostLocations(380),
pacificOcean-NewZealand-ChathamIslands(381),
pacificOcean-Niue(382),
pacificOcean-NorfolkIsland(383),
pacificOcean-NorthernMarianaIslands(384),
pacificOcean-Palau(385),
pacificOcean-PapuaNewGuinea(386),
pacificOcean-Pitcairn(387),
pacificOcean-SamoaAmerican(388),
pacificOcean-SamoaWestern(389),
pacificOcean-SolomonIslands(390),
pacificOcean-Tokelau(391),
pacificOcean-Tonga(392),
pacificOcean-Tuvalu(393),
pacificOceanUSA-EastTime(394),
pacificOceanUSA-EastTime-MichiganMostLocations(395),
pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
pacificOceanUSA-CentTime(402),
pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
pacificOceanUSA-MountTime(405),
pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
pacificOceanUSA-MountTime-Navajo(407),
pacificOceanUSA-MountStdTime-Arizona(408),
pacificOceanUSA-PacificTime(409),
pacificOceanUSA-AlaskaTime(410),
pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
pacificOceanUSA-AlaskaTime-WestAlaska(413),
pacificOceanUSA-AleutianIslands(414),
pacificOceanUSA-Hawaii(415),
pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
pacificOcean-Vanuatu(419),
pacificOcean-WallisAndFutuna(420)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The daylight savings location."
::= { agSystem 51 }
agNewDaylightSavings OBJECT-TYPE
SYNTAX INTEGER {
none(0),
africa-Algeria(1),
africa-Angola(2),
africa-Benin(3),
africa-Botswana(4),
africa-Burkina-Faso(5),
africa-Burundi(6),
africa-Cameroon(7),
africa-Central-African-Rep(8),
africa-Chad(9),
africa-Congo-WestDemRepCongo(10),
africa-Congo-EastDemRepCongo(11),
africa-Congo-Rep(12),
africa-Cote-dIvoire(13),
africa-Djibouti(14),
africa-Egypt(15),
africa-Equatorial-Guinea(16),
africa-Eritrea(17),
africa-Ethiopia(18),
africa-Gabon(19),
africa-Gambia(20),
africa-Ghana(21),
africa-Guinea(22),
africa-Guinea-Bissau(23),
africa-Kenya(24),
africa-Lesotho(25),
africa-Liberia(26),
africa-Libya(27),
africa-Malawi(28),
africa-Mali-SouthWestMali(29),
africa-Mali-NorthEastMali(30),
africa-Mauritania(31),
africa-Morocco(32),
africa-Mozambique(33),
africa-Namibia(34),
africa-Niger(35),
africa-Nigeria(36),
africa-Rwanda(37),
africa-SaoTome-And-Principe(38),
africa-Senegal(39),
africa-SierraLeone(40),
africa-Somalia(41),
africa-SouthAfrica(42),
africa-Spain-Mainland(43),
africa-Spain-CeutaMelilla(44),
africa-Spain-CanaryIslands(45),
africa-Sudan(46),
africa-Swaziland(47),
africa-Tanzania(48),
africa-Togo(49),
africa-Tunisia(50),
africa-Uganda(51),
africa-Western-Sahara(52),
africa-Zambia(53),
africa-Zimbabwe(54),
americas-Anguilla(55),
americas-Antigua-Barbuda(56),
americas-Argentina-EArgentina(57),
americas-Argentina-MostLocations(58),
americas-Argentina-Jujuy(59),
americas-Argentina-Catamarca(60),
americas-Argentina-Mendoza(61),
americas-Aruba(62),
americas-Bahamas(63),
americas-Barbados(64),
americas-Belize(65),
americas-Bolivia(66),
americas-Brazil-AtlanticIslands(67),
americas-Brazil-AmapaEPara(68),
americas-Brazil-NEBrazil(69),
americas-Brazil-Pernambuco(70),
americas-Brazil-Tocantins(71),
americas-Brazil-AlagoasSergipe(72),
americas-Brazil-SSEBrazil(73),
americas-Brazil-MatoGrossoDoSul(74),
americas-Brazil-WParaRondonia(75),
americas-Brazil-Roraima(76),
americas-Brazil-EAmazonas(77),
americas-Brazil-WAmazonas(78),
americas-Brazil-Acre(79),
americas-Canada-NewfoundlandIsland(80),
americas-Canada-AtlanTime-NovaScotia(81),
americas-Canada-AtlanTime-ELabrador(82),
americas-Canada-EastTime-OntarioMostlocation(83),
americas-Canada-EastTime-ThunderBay(84),
americas-Canada-EastStdTime-PangnirtungNunavut(85),
americas-Canada-EastStdTime-EastNunavut(86),
americas-Canada-EastStdTime-CenNunavut(87),
americas-Canada-CenTime-ManitobaWestOntario(88),
americas-Canada-CenTime-RainyRiver(89),
americas-Canada-CenTime-WestNunavut(90),
americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
americas-Canada-CenStdTime-SaskatchewanMidwest(92),
americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
americas-Canada-MountTime-CentralNorthwestTerritories(94),
americas-Canada-MountTime-WestNorthwestTerritories(95),
americas-Canada-MountStdTime-EastBritishColumbia(96),
americas-Canada-PacificTime-WestBritishColumbia(97),
americas-Canada-PacificTime-SouthYukon(98),
americas-Canada-PacificTime-NorthYukon(99),
americas-CaymanIslands(100),
americas-Chile-MostLocation(101),
americas-Chile-EasterIsland(102),
americas-Colombia(103),
americas-CostaRica(104),
americas-Cuba(105),
americas-Dominica(106),
americas-DominicanRepublic (107),
americas-Ecuador(108),
americas-ElSalvado(109),
americas-FrenchGuiana(110),
americas-Greenland-MostLocation(111),
americas-Greenland-EastCoastNorthScoresbysund(112),
americas-Greenland-ScoresbysundIttoqqortoormiit(113),
americas-Greenland-ThulePituffik(114),
americas-Grenada(115),
americas-Guadeloupe(116),
americas-Guatemala(117),
americas-Guyana(118),
americas-Haiti(119),
americas-Honduras(120),
americas-Jamaica(121),
americas-Martinique(122),
americas-Mexico-CentTime-Mostlocations(123),
americas-Mexico-CentTime-QuintanaRoo(124),
americas-Mexico-CentTime-CampecheYucatan(125),
americas-Mexico-CentTime-CoahDurangoNLTamaulipas(126),
americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
americas-Mexico-MountTime-Chihuahua(128),
americas-Mexico-MountStdTime-Sonora(129),
americas-Mexico-PacificTime(130),
americas-Montserrat(131),
americas-NetherlandsAntilles(132),
americas-Nicaragua(133),
americas-Panama(134),
americas-Paraguay(135),
americas-Peru(136),
americas-PuertoRico(137),
americas-StKittsAndNevis(138),
americas-StLucia(139),
americas-StPierreAndMiquelon(140),
americas-StVincent(141),
americas-Suriname(142),
americas-TrinidadAndTobago(143),
americas-TurksAndCaicosIs(144),
americas-USA-EastTime(145),
americas-USA-EastTime-MichiganMostLocation(146),
americas-USA-EastTime-KentuckyLouisvilleArea(147),
americas-USA-EastTime-KentuckyWayneCounty(148),
americas-USA-EastStdTime-IndianaMostLocations(149),
americas-USA-EastStdTime-IndianaCrawfordCounty(150),
americas-USA-EastStdTime-IndianaStarkeCounty(151),
americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
americas-USA-CentTime(153),
americas-USA-CentTime-MichiganWisconsinborder(154),
americas-USA-CentTime-NorthDakotaOliverCounty(155),
americas-USA-MountTime(156),
americas-USA-MountTime-SouthIdahoAndEastOregon(157),
americas-USA-MountTime-Navajo(158),
americas-USA-MountStdTime-Arizona(159),
americas-USA-PacificTime(160),
americas-USA-AlaskaTime(161),
americas-USA-AlaskaTime-AlaskaPanhandle(162),
americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
americas-USA-AlaskaTime-WestAlaska(164),
americas-USA-AleutianIslands(165),
americas-USA-Hawaii(166),
americas-Uruguay(167),
americas-Venezuela(168),
americas-VirginIslands-UK(169),
americas-VirginIslands-US(170),
antarctica-McMurdoStationRossIsland(171),
antarctica-Amundsen-ScottStationSouthPole(172),
antarctica-PalmerStationAnversIsland(173),
antarctica-MawsonStationHolmeBay(174),
antarctica-DavisStationVestfoldHills(175),
antarctica-CaseyStationBaileyPeninsula(176),
antarctica-VostokStationSMagneticPole(177),
antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
antarctica-SyowaStationEOngulI(179),
arcticOcean-Svalbard(180),
arcticOcean-JanMayen(181),
asia-Afghanistan(182),
asia-Armenia(183),
asia-Azerbaijan(184),
asia-Bahrain(185),
asia-Bangladesh(186),
asia-Bhutan(187),
asia-Brunei(188),
asia-Cambodia(189),
asia-China-EastChinaBeijingGuangdongShanghai(190),
asia-China-Heilongjiang(191),
asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
asia-China-TibetmostofXinjiangUyghur(193),
asia-China-SouthwestXinjiangUyghur(194),
asia-Cyprus(195),
asia-EastTimor(196),
asia-Georgia(197),
asia-HongKong(198),
asia-India(199),
asia-Indonesia-JavaAndSumatra(200),
asia-Indonesia-WestCentralBorneo(201),
asia-Indonesia-EastSouthBorneoBaliWestTimor(202),
asia-Indonesia-IrianJayaAndMoluccas(203),
asia-Iran(204),
asia-Iraq(205),
asia-Israel(206),
asia-Japan(207),
asia-Jordan(208),
asia-Kazakhstan-MostLocations(209),
asia-Kazakhstan-QyzylordaKyzylorda(210),
asia-Kazakhstan-Aqtobe(211),
asia-Kazakhstan-AtyrauMangghystau(212),
asia-Kazakhstan-WestKazakhstan(213),
asia-Korea-North(214),
asia-Korea-South(215),
asia-Kuwait(216),
asia-Kyrgyzstan(217),
asia-Laos(218),
asia-Lebanon(219),
asia-Macau(220),
asia-Malaysia-PeninsularMalaysia(221),
asia-Malaysia-SabahSarawak(222),
asia-Mongolia-MostLocations(223),
asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
asia-Mongolia-DornodSukhbaatar(225),
asia-Myanmar(226),
asia-Nepal(227),
asia-Oman(228),
asia-Pakistan(229),
asia-Palestine(230),
asia-Philippines(231),
asia-Qatar(232),
asia-Russia-Moscow-01Kaliningrad(233),
asia-Russia-Moscow00WestRussia(234),
asia-Russia-Moscow01CaspianSea(235),
asia-Russia-Moscow02Urals(236),
asia-Russia-Moscow03WestSiberia(237),
asia-Russia-Moscow03Novosibirsk(238),
asia-Russia-Moscow04YeniseiRiver(239),
asia-Russia-Moscow05LakeBaikal(240),
asia-Russia-Moscow06LenaRiver(241),
asia-Russia-Moscow07AmurRiver(242),
asia-Russia-Moscow07SakhalinIsland(243),
asia-Russia-Moscow08Magadan(244),
asia-Russia-Moscow09Kamchatka(245),
asia-Russia-Moscow10BeringSea(246),
asia-SaudiArabia(247),
asia-Singapore(248),
asia-SriLanka(249),
asia-Syria(250),
asia-Taiwan(251),
asia-Tajikistan(252),
asia-Thailand(253),
asia-Turkmenistan(254),
asia-UnitedArabEmirates(255),
asia-Uzbekistan-WestUzbekistan(256),
asia-Uzbekistan-EastUzbekistan(257),
asia-Vietnam(258),
asia-Yemen(259),
atlanticOcean-Bermuda(260),
atlanticOcean-CapeVerde(261),
atlanticOcean-FaeroeIslands(262),
atlanticOcean-FalklandIslands(263),
atlanticOcean-Iceland(264),
atlanticOcean-Portugal-Mainland(265),
atlanticOcean-Portugal-MadeiraIslands(266),
atlanticOcean-Portugal-Azores(267),
atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
atlanticOcean-Spain-Mainland(269),
atlanticOcean-Spain-CeutaMelilla(270),
atlanticOcean-Spain-CanaryIslands(271),
atlanticOcean-StHelena(272),
atlanticOcean-Svalbard-JanMayen(273),
australia-LordHoweIsland(274),
australia-Tasmania(275),
australia-Victoria(276),
australia-NewSouthWales-MostLocations(277),
australia-NewSouthWales-Yancowinna(278),
australia-Queensland-MostLocations(279),
australia-Queensland-HolidayIslands(280),
australia-SouthAustralia(281),
australia-NorthernTerritory(282),
australia-WesternAustralia(283),
europe-Albania(284),
europe-Andorra(285),
europe-Austria(286),
europe-Belarus(287),
europe-Belgium(288),
europe-BosniaHerzegovina(289),
europe-Britain-UKGreatBritain(290),
europe-Britain-UKNorthernIreland(291),
europe-Bulgaria(292),
europe-Croatia(293),
europe-CzechRepublic(294),
europe-Denmark(295),
europe-Estonia(296),
europe-Finland(297),
europe-France(298),
europe-Germany(299),
europe-Gibraltar(300),
europe-Greece(301),
europe-Hungary(302),
europe-Ireland(303),
europe-Italy(304),
europe-Latvia(305),
europe-Liechtenstein(306),
europe-Lithuania(307),
europe-Luxembourg(308),
europe-Macedonia(309),
europe-Malta(310),
europe-Moldova(311),
europe-Monaco(312),
europe-Netherlands(313),
europe-Norway(314),
europe-Poland(315),
europe-Portugal-Mainland(316),
europe-Portugal-MadeiraIslands(317),
europe-Portugal-Azores(318),
europe-Romania(319),
europe-Russia-Moscow-01Kaliningrad(320),
europe-Russia-Moscow00WestRussia(321),
europe-Russia-Moscow01CaspianSea(322),
europe-Russia-Moscow02Urals(323),
europe-Russia-Moscow03WestSiberia(324),
europe-Russia-Moscow03Novosibirsk(325),
europe-Russia-Moscow04YeniseiRiver(326),
europe-Russia-Moscow05LakeBaikal(327),
europe-Russia-Moscow06LenaRiver(328),
europe-Russia-Moscow07AmurRiver(329),
europe-Russia-Moscow07SakhalinIsland(330),
europe-Russia-Moscow08Magadan(331),
europe-Russia-Moscow09Kamchatka(332),
europe-Russia-Moscow10BeringSea(333),
europe-SanMarino(334),
europe-Slovakia(335),
europe-Slovenia(336),
europe-Spain-Mainland(337),
europe-Spain-CeutaAndMelilla(338),
europe-Spain-CanaryIslands(339),
europe-Sweden(340),
europe-Switzerland(341),
europe-Turkey(342),
europe-Ukraine-MostLocations(343),
europe-Ukraine-Ruthenia(344),
europe-Ukraine-Zaporozhye-ELugansk(345),
europe-Ukraine-CentralCrimea(346),
europe-VaticanCity(347),
europe-Yugoslavia(348),
indianOcean-BritishIndianOceanTerritory(349),
indianOcean-ChristmasIsland(350),
indianOcean-CocosOrKeelingIslands(351),
indianOcean-Comoros(352),
indianOcean-FrenchSouthernAndAntarcticLands(353),
indianOcean-Madagascar(354),
indianOcean-Maldives(355),
indianOcean-Mauritius(356),
indianOcean-Mayotte(357),
indianOcean-Reunion(358),
indianOcean-Seychelles(359),
pacificOcean-Chile-MostLocations(360),
pacificOcean-Chile-EasterIslandSalayGomez(361),
pacificOcean-CookIslands(362),
pacificOcean-Ecuador(363),
pacificOcean-Fiji(364),
pacificOcean-FrenchPolynesia-SocietyIslands(365),
pacificOcean-FrenchPolynesia-MarquesasIslands(366),
pacificOcean-FrenchPolynesia-GambierIslands(367),
pacificOcean-Guam(368),
pacificOcean-Kiribati-GilbertIslands(369),
pacificOcean-Kiribati-PhoenixIslands(370),
pacificOcean-Kiribati-LineIslands(371),
pacificOcean-MarshallIslands-MostLocations(372),
pacificOcean-MarshallIslands-Kwajalein(373),
pacificOcean-Micronesia-Yap(374),
pacificOcean-Micronesia-TrukOrChuuk(375),
pacificOcean-Micronesia-PonapeOrPohnpei(376),
pacificOcean-Micronesia-Kosrae(377),
pacificOcean-Nauru(378),
pacificOcean-NewCaledonia(379),
pacificOcean-NewZealand-MostLocations(380),
pacificOcean-NewZealand-ChathamIslands(381),
pacificOcean-Niue(382),
pacificOcean-NorfolkIsland(383),
pacificOcean-NorthernMarianaIslands(384),
pacificOcean-Palau(385),
pacificOcean-PapuaNewGuinea(386),
pacificOcean-Pitcairn(387),
pacificOcean-SamoaAmerican(388),
pacificOcean-SamoaWestern(389),
pacificOcean-SolomonIslands(390),
pacificOcean-Tokelau(391),
pacificOcean-Tonga(392),
pacificOcean-Tuvalu(393),
pacificOceanUSA-EastTime(394),
pacificOceanUSA-EastTime-MichiganMostLocations(395),
pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
pacificOceanUSA-CentTime(402),
pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
pacificOceanUSA-MountTime(405),
pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
pacificOceanUSA-MountTime-Navajo(407),
pacificOceanUSA-MountStdTime-Arizona(408),
pacificOceanUSA-PacificTime(409),
pacificOceanUSA-AlaskaTime(410),
pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
pacificOceanUSA-AlaskaTime-WestAlaska(413),
pacificOceanUSA-AleutianIslands(414),
pacificOceanUSA-Hawaii(415),
pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
pacificOcean-Vanuatu(419),
pacificOceanWallisAndFutuna(420)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The daylight savings location."
::= { agSystem 52 }
agCfgSysDlight OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable daylight savings time."
::= { agSystem 53 }
agCurCfgIdleCLITimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set idle CLI sessions timeout."
::= { agSystem 55 }
agNewCfgIdleCLITimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set idle CLI sessions timeout."
::= { agSystem 56 }
agCurCfgUfdTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the UFDFO SNMP trap."
::= { agSystem 57 }
agNewCfgUfdTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sending UFDFO SNMP trap."
::= { agSystem 58 }
agCurCfgReminders OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of reminders feature."
::= { agSystem 59 }
agNewCfgReminders OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable reminders feature."
::= { agSystem 60 }
agCurBootNxtCliMode OBJECT-TYPE
SYNTAX INTEGER {
aoscli(1),
iscli(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current boot mode."
::= { agSystem 66 }
agNewBootNxtCliMode OBJECT-TYPE
SYNTAX INTEGER {
aoscli(1),
iscli(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Next cli boot mode."
::= { agSystem 67 }
agCurBootNxtCliModePrompt OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of selectable CLI mode prompt."
::= { agSystem 78 }
agNewBootNxtCliModePrompt OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Next status of selectable CLI mode prompt."
::= { agSystem 79 }
agCurCfgDhcp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP, as currently configured in the
current_configuration block."
::= { agSystem 70 }
agNewCfgDhcp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP, in the new_configuration block."
::= { agSystem 71 }
agCfgL3Status OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of L3 feature."
::= { agSystem 72 }
agCurCfgHprompt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of hprompt."
::= { agSystem 73 }
agNewCfgHprompt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of hpprompt."
::= { agSystem 75 }
agCurCfgLoginNotice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user defined login notice."
::= { agSystem 76 }
agNewCfgLoginNotice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user defined login notice."
::= { agSystem 77 }
agCurCfgOldDst OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable system DST for US."
::= { agSystem 82 }
agNewCfgOldDst OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable system DST for US."
::= { agSystem 83 }
agHavePanicDump OBJECT-TYPE
SYNTAX INTEGER {
havePanic(1),
noHavePanic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user the information
whether a panic dump exist in flash."
::= { agSystem 84 }
-- Syslog Configuration
agCurCfgSyslogHost OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog host IP address, as currently configured in
the current_configuration block."
::= { agSyslog 1 }
agNewCfgSyslogHost OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog host IP address, in the new_configuration block."
::= { agSyslog 2 }
agCurCfgSyslog2Host OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second syslog host IP address, as currently configured in
the current_configuration block."
::= { agSyslog 3 }
agNewCfgSyslog2Host OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second syslog host IP address, in the new_configuration block."
::= { agSyslog 4 }
agCurCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The facility of syslog host in the current_configuration block."
::= { agSyslog 5 }
agNewCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility of syslog host in the new_configuration block."
::= { agSyslog 6 }
agCurCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The facility of syslog2 host in the current_configuration block."
::= { agSyslog 7 }
agNewCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility of syslogs host in the new_configuration block."
::= { agSyslog 8 }
agCurCfgSyslogSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslog host in the current configuration block."
::= { agSyslog 13 }
agNewCfgSyslogSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslog host in the new configuration block."
::= { agSyslog 14 }
agCurCfgSyslog2Sev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslog2 host in the current configuration block."
::= { agSyslog 15 }
agNewCfgSyslog2Sev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslogs host in the new configuration block."
::= { agSyslog 16 }
agClrSyslogMsgs OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all current Syslog messages."
::= { agSyslog 9 }
agSyslogMsgTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the syslog message table."
::= { agSyslog 10 }
agSyslogMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgSyslogMsgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of syslog messages."
::= { agSyslog 11 }
agSyslogMsgTableEntry OBJECT-TYPE
SYNTAX AgSyslogMsgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A syslog message stored on the switch."
INDEX { agSyslogMsgIndex }
::= { agSyslogMsgTable 1 }
AgSyslogMsgTableEntry ::= SEQUENCE {
agSyslogMsgIndex Integer32,
agSyslogMessage DisplayString
}
agSyslogMsgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog message table index."
::= { agSyslogMsgTableEntry 1 }
agSyslogMessage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog message."
::= { agSyslogMsgTableEntry 2 }
agLog OBJECT IDENTIFIER ::= { agSyslog 12 }
agNewCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable console syslog and SNMP trap, in the
new_configuration block."
::= { agLog 1 }
agCurCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable console syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 2 }
agNewCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable system level syslog and SNMP trap, in the
new_configuration block."
::= { agLog 3 }
agCurCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable system level syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 4 }
agNewCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap, in the new_configuration block."
::= { agLog 5 }
agCurCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap, as currently configured in the current_configuration block."
::= { agLog 6 }
agNewCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap, in the
new_configuration block."
::= { agLog 7 }
agCurCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap, as
currently configured in the current_configuration block."
::= { agLog 8 }
agNewCfgSyslogTrapStg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap, in the
new_configuration block."
::= { agLog 9 }
agCurCfgSyslogTrapStg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 10 }
agNewCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap, in the new_configuration
block."
::= { agLog 11 }
agCurCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 12 }
agNewCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap, in the
new_configuration block."
::= { agLog 19 }
agCurCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 20 }
agNewCfgSyslogTrapVrrp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VRRP syslog and SNMP trap, in the new_configuration
block."
::= { agLog 21 }
agCurCfgSyslogTrapVrrp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable VRRP syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 22 }
agNewCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap, in the new_configuration
block."
::= { agLog 25 }
agCurCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 26 }
agNewCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 31 }
agCurCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 32 }
agNewCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 35 }
agCurCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 36 }
agNewCfgSyslogTrapOspf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable OSPF related syslog and SNMP trap,
in the new_configuration block."
::= { agLog 41 }
agCurCfgSyslogTrapOspf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable OSPF related syslog and SNMP trap,
as currently configured in the current_configuration block."
::= { agLog 42 }
agNewCfgSyslogTrapRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable rmon related syslog and SNMP trap,
in the new_configuration block."
::= { agLog 45 }
agCurCfgSyslogTrapRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable rmon related syslog and SNMP trap,
as currently configured in the current_configuration block."
::= { agLog 46 }
agNewCfgSyslogTrapUfd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UFD related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 47 }
agCurCfgSyslogTrapUfd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable UFD related syslog and SNMP trap,
as currently configured in the current_configuration block."
::= { agLog 48 }
agNewCfgSyslogTrap8021x OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable 802.1 related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 51 }
agCurCfgSyslogTrap8021x OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable 802.1 related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 52 }
agNewCfgSyslogTrapCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable CFG related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 49 }
agCurCfgSyslogTrapCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable CFG related syslog and SNMP trap,
as currently configured in the current_configuration block."
::= { agLog 50 }
agNewCfgSyslogTrapAll OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, in the
new_configuration block."
::= { agLog 55 }
agCurCfgSyslogTrapAll OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, as currently
configured in the current_configuration block."
::= { agLog 56 }
-- TFTP Config
agTransferServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The FTP/TFTP server IP address or domain name."
::= { agTransfer 1 }
agTransferImage OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3),
boot(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the image file should be loaded in image1 or image2 or
boot in flash."
::= { agTransfer 2 }
agTransferImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The image file name to be downloaded."
::= { agTransfer 3 }
agTransferCfgFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration file name."
::= { agTransfer 4 }
agTransferDumpFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The core dump file name."
::= { agTransfer 5 }
agTransferAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
img-get(2),
cfg-get(3),
cfg-put(4),
dump-put(5),
img-put(7),
tsdump-put(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to perform various FTP/TFTP Get or Put functions.
The FTP/TFTP sever is specified in agTransferServer object.
img-get(2) - Download switch image from a specified image
file(agTransferImageFileName) on the FTP/TFTP server to
the destinated storage(agTransferImage).
cfg-get(3) - Download switch configuration from a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
dump-put(5)- Download switch core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
img-put(7) - Upload specified switch image to a specified image
file(agTransferImageFileName) on the FTP/TFTP server.
tsdump-put(5)- Download switch core dump to a specified
file (agTransferTSDumpFileName) on the FTP/TFTP server.
other(1) is returned always when read."
::= { agTransfer 6 }
agTransferLastActionStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The recorded status of the previous FTP/TFTP activity."
::= { agTransfer 7 }
agTransferUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username for FTP server or blank for TFTP server."
::= { agTransfer 9 }
agTransferPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for FTP server."
::= { agTransfer 10 }
agTransferTSDumpFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TS dump file name."
::= { agTransfer 11 }
agTransferLastConfigurationActionStatus OBJECT-TYPE
SYNTAX INTEGER {
successfully(1),
failed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last configuration action using the file ftp/tftp'd
from the server."
::= { agTransfer 14 }
-- Agent Port Table
agPortTableMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration host table."
::= { agPortConfig 1 }
agPortCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the current_configuration block."
::= { agPortConfig 2 }
agPortCurCfgTableEntry OBJECT-TYPE
SYNTAX AgPortCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port table in the current_configuration block."
INDEX { agPortCurCfgIndx }
::= { agPortCurCfgTable 1 }
AgPortCurCfgTableEntry ::= SEQUENCE {
agPortCurCfgIndx Integer32,
agPortCurCfgState INTEGER,
agPortCurCfgVlanTag INTEGER,
agPortCurCfgRmon INTEGER,
agPortCurCfgPVID INTEGER,
agPortCurCfgGigEthAutoNeg INTEGER,
agPortCurCfgGigEthSpeed INTEGER,
agPortCurCfgGigEthMode INTEGER,
agPortCurCfgGigEthFctl INTEGER,
agPortCurCfgPortName DisplayString
,agPortCurCfgLinkTrap INTEGER
,agPortCurCfgTagPVID INTEGER
,agPortCurCfgMulticastThreshold INTEGER,
agPortCurCfgMulticastThresholdRate INTEGER,
agPortCurCfgBroadcastThreshold INTEGER,
agPortCurCfgBroadcastThresholdRate INTEGER,
agPortCurCfgDLFThreshold INTEGER,
agPortCurCfgDLFThresholdRate INTEGER
,agPortCurCfgPortMedia INTEGER
,agPortCurCfgPortMediat INTEGER
,agPortCurCfgType DisplayString
}
agPortCurCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { agPortCurCfgTableEntry 1 }
agPortCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the state of the port."
::= { agPortCurCfgTableEntry 2 }
agPortCurCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is VLAN tag state of the port"
::= { agPortCurCfgTableEntry 3 }
agPortCurCfgRmon OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to turn RMON on or off on the port."
::= { agPortCurCfgTableEntry 5 }
agPortCurCfgPVID OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default VLAN ID for the port."
::= { agPortCurCfgTableEntry 6 }
agPortCurCfgGigEthAutoNeg OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 11 }
agPortCurCfgGigEthSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
any(4),
mbs1000(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selects the port speed for gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 12 }
agPortCurCfgGigEthMode OBJECT-TYPE
SYNTAX INTEGER {
full-duplex(2),
half-duplex(3),
full-or-half-duplex(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to select port mode for gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 13 }
agPortCurCfgGigEthFctl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to select port flow control for
gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 14 }
agPortCurCfgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port name."
::= { agPortCurCfgTableEntry 15 }
agPortCurCfgLinkTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise."
::= { agPortCurCfgTableEntry 18 }
agPortCurCfgTagPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is PVID tag state of the port"
::= { agPortCurCfgTableEntry 19 }
agPortCurCfgMulticastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Multicast Threshold."
::= { agPortCurCfgTableEntry 20 }
agPortCurCfgMulticastThresholdRate OBJECT-TYPE
SYNTAX INTEGER(0..262143)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Multicast Threshold Rate."
::= { agPortCurCfgTableEntry 21 }
agPortCurCfgBroadcastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Broadcast Threshold."
::= { agPortCurCfgTableEntry 22 }
agPortCurCfgBroadcastThresholdRate OBJECT-TYPE
SYNTAX INTEGER(0..262143)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Broadcast Threshold Rate."
::= { agPortCurCfgTableEntry 23 }
agPortCurCfgDLFThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Destination Lookup Fail Threshold."
::= { agPortCurCfgTableEntry 24 }
agPortCurCfgDLFThresholdRate OBJECT-TYPE
SYNTAX INTEGER(0..262143)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Destination Lookup Fail Threshold Rate."
::= { agPortCurCfgTableEntry 25 }
agPortCurCfgPortMedia OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
copper(1),
fiber(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port media."
::= { agPortCurCfgTableEntry 26 }
agPortCurCfgPortMediat OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
sfp(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port media."
::= { agPortCurCfgTableEntry 27 }
agPortCurCfgType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port type."
::= { agPortCurCfgTableEntry 28 }
agPortNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the new_configuration block."
::= { agPortConfig 3 }
agPortNewCfgTableEntry OBJECT-TYPE
SYNTAX AgPortNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port configuration table in the new_configuration block."
INDEX { agPortNewCfgIndx }
::= { agPortNewCfgTable 1 }
AgPortNewCfgTableEntry ::= SEQUENCE {
agPortNewCfgIndx Integer32,
agPortNewCfgState INTEGER,
agPortNewCfgVlanTag INTEGER,
agPortNewCfgRmon INTEGER,
agPortNewCfgPVID INTEGER,
agPortNewCfgGigEthAutoNeg INTEGER,
agPortNewCfgGigEthSpeed INTEGER,
agPortNewCfgGigEthMode INTEGER,
agPortNewCfgGigEthFctl INTEGER,
agPortNewCfgPortName DisplayString
,agPortNewCfgLinkTrap INTEGER
,agPortNewCfgTagPVID INTEGER
,agPortNewCfgMulticastThreshold INTEGER,
agPortNewCfgMulticastThresholdRate INTEGER,
agPortNewCfgBroadcastThreshold INTEGER,
agPortNewCfgBroadcastThresholdRate INTEGER,
agPortNewCfgDLFThreshold INTEGER,
agPortNewCfgDLFThresholdRate INTEGER
,agPortNewCfgPortMedia INTEGER
,agPortNewCfgPortMediat INTEGER
,agPortNewCfgType DisplayString
}
agPortNewCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { agPortNewCfgTableEntry 1 }
agPortNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the state of the port."
::= { agPortNewCfgTableEntry 2 }
agPortNewCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is VLAN tag state of the port"
::= { agPortNewCfgTableEntry 3 }
agPortNewCfgRmon OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to turn RMON on or off on the port."
::= { agPortNewCfgTableEntry 5 }
agPortNewCfgPVID OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default VLAN ID for the port."
::= { agPortNewCfgTableEntry 6 }
agPortNewCfgGigEthAutoNeg OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 11 }
agPortNewCfgGigEthSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
any(4),
mbs1000(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the port speed for gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 12 }
agPortNewCfgGigEthMode OBJECT-TYPE
SYNTAX INTEGER {
full-duplex(2),
half-duplex(3),
full-or-half-duplex(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to select port mode for gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 13 }
agPortNewCfgGigEthFctl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to select port flow control for
gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 14 }
agPortNewCfgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..65))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch port name."
::= { agPortNewCfgTableEntry 15 }
agPortNewCfgLinkTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise."
::= { agPortNewCfgTableEntry 18 }
agPortNewCfgTagPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is PVID tag state of the port"
::= { agPortNewCfgTableEntry 19 }
agPortNewCfgMulticastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Multicast Threshold."
::= { agPortNewCfgTableEntry 20 }
agPortNewCfgMulticastThresholdRate OBJECT-TYPE
SYNTAX INTEGER(0..262143)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Multicast Threshold Rate."
::= { agPortNewCfgTableEntry 21 }
agPortNewCfgBroadcastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Broadcast Threshold."
::= { agPortNewCfgTableEntry 22 }
agPortNewCfgBroadcastThresholdRate OBJECT-TYPE
SYNTAX INTEGER(0..262143)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Broadcast Threshold Rate."
::= { agPortNewCfgTableEntry 23 }
agPortNewCfgDLFThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Destination Lookup Fail Threshold."
::= { agPortNewCfgTableEntry 24 }
agPortNewCfgDLFThresholdRate OBJECT-TYPE
SYNTAX INTEGER(0..262143)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Destination Lookup Fail Threshold Rate."
::= { agPortNewCfgTableEntry 25 }
agPortNewCfgPortMedia OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
copper(1),
fiber(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Media."
::= { agPortNewCfgTableEntry 26 }
agPortNewCfgPortMediat OBJECT-TYPE
SYNTAX INTEGER {
copper(1),
sfp(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Media."
::= { agPortNewCfgTableEntry 27 }
agPortNewCfgType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port type."
::= { agPortNewCfgTableEntry 28 }
-- SSH Configuration
sshCurCfgIntrval OBJECT-TYPE
SYNTAX INTEGER(0..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval for generating the RSA server key."
::= { agSSHConfig 1 }
sshNewCfgIntrval OBJECT-TYPE
SYNTAX INTEGER(0..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Interval for generating the RSA server key."
::= { agSSHConfig 2 }
sshCurCfgScpAdm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCP-only admin password."
::= { agSSHConfig 3 }
sshNewCfgScpAdm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SCP-only admin password."
::= { agSSHConfig 4 }
sshNewCfgHKeyGen OBJECT-TYPE
SYNTAX INTEGER {
generate(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to generate the RSA host key.
other(2) is returned always when read.
The following values are writable: generate(1).. Generate the RSA host key."
::= { agSSHConfig 5 }
sshNewCfgSKeyGen OBJECT-TYPE
SYNTAX INTEGER {
generate(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to generate the RSA server key.
other(2) is returned always when read.
The following values are writable: generate(1).. Generate the RSA server key."
::= { agSSHConfig 6 }
sshCurCfgSSHPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH server port number."
::= { agSSHConfig 7 }
sshNewCfgSSHPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SSH server port number."
::= { agSSHConfig 8 }
sshCurCfgScpApplySave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCP apply and save."
::= { agSSHConfig 9 }
sshNewCfgScpApplySave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the SCP apply and save."
::= { agSSHConfig 10 }
sshCurCfgStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH server status."
::= { agSSHConfig 11 }
sshNewCfgStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn SSH server ON/OFF."
::= { agSSHConfig 12 }
-- RADIUS Configuration
radCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Primary RADIUS server."
::= { agRadiusConfig 1 }
radNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Primary RADIUS server."
::= { agRadiusConfig 2 }
radCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Secondary RADIUS server."
::= { agRadiusConfig 3 }
radNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Secondary RADIUS server."
::= { agRadiusConfig 4 }
radCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the RADIUS port number."
::= { agRadiusConfig 5 }
radNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speicfy the RADIUS port number."
::= { agRadiusConfig 6 }
radCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { agRadiusConfig 7 }
radNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { agRadiusConfig 8 }
radCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the RADIUS server."
::= { agRadiusConfig 9 }
radNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the RADIUS server."
::= { agRadiusConfig 10 }
radCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS authentication."
::= { agRadiusConfig 11 }
radNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS authentication."
::= { agRadiusConfig 12 }
radCurCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RADIUS authentication string."
::= { agRadiusConfig 13 }
radNewCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS authentication string."
::= { agRadiusConfig 14 }
radCurCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS backdoor for telnet/ssh/http/https."
::= { agRadiusConfig 15 }
radNewCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS backdoor for telnet/ssh/http/https."
::= { agRadiusConfig 16 }
radCurCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second RADIUS authentication string."
::= { agRadiusConfig 17 }
radNewCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second RADIUS authentication string."
::= { agRadiusConfig 18 }
radCurCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS secure backdoor for telnet."
::= { agRadiusConfig 19 }
radNewCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS secure backdoor for telnet."
::= { agRadiusConfig 20 }
-- NTP Configuration
agCurCfgNTPServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NTP Server Address."
::= { agNTP 1 }
agNewCfgNTPServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP Server Address."
::= { agNTP 2 }
agCurCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (1..44640)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 3 }
agNewCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (1..44640)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 4 }
agCurCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 9 }
agNewCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 10 }
agCurCfgNTPSecServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Secondary NTP Server Address."
::= { agNTP 11 }
agNewCfgNTPSecServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Secondary NTP Server Address."
::= { agNTP 12 }
-- APPLY Configuration
agApplyPending OBJECT-TYPE
SYNTAX INTEGER {
applyNeeded(2),
noApplyNeeded(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user information
whether an apply action is needed and that the configuration
has been chaged by the user actions. The user then can
apply the changes by setting proper value to the object
agApplyConfiguration described above."
::= { agApply 1 }
agApplyConfig OBJECT-TYPE
SYNTAX INTEGER {
apply(1),
idle(2),
inprogress(3),
complete(4),
failed(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(3) indicates that there is no apply in progess.
complete(5) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable."
::= { agApply 2 }
agApplyTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the apply table."
::= { agApply 4 }
agApplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgApplyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of URL path for URL load balancing in the current_config."
::= { agApply 5 }
agApplyTableEntry OBJECT-TYPE
SYNTAX AgApplyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an URL path for URL load balancing."
INDEX { agApplyIndex }
::= { agApplyTable 1 }
AgApplyTableEntry ::= SEQUENCE {
agApplyIndex Integer32,
agApplyString OCTET STRING
}
agApplyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agApplyTableEntry 1 }
agApplyString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the apply table."
::= { agApplyTableEntry 2 }
-- TACACS+ Configuration
tacCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Primary TACACS+ server."
::= { agTacacsConfig 1 }
tacNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Primary TACACS+ server."
::= { agTacacsConfig 2 }
tacCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Secondary TACSACS server."
::= { agTacacsConfig 3 }
tacNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Secondary TACACS+ server."
::= { agTacacsConfig 4 }
tacCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the TACACS+ port number."
::= { agTacacsConfig 5 }
tacNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the TACACS+ port number."
::= { agTacacsConfig 6 }
tacCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to TACACS+ server."
::= { agTacacsConfig 7 }
tacNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to TACACS+ server."
::= { agTacacsConfig 8 }
tacCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the TACACS+ server."
::= { agTacacsConfig 9 }
tacNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the TACACS+ server."
::= { agTacacsConfig 10 }
tacCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ authentication."
::= { agTacacsConfig 11 }
tacNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ authentication."
::= { agTacacsConfig 12 }
tacCurCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TACACS+ authentication string."
::= { agTacacsConfig 13 }
tacNewCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TACACS+ authentication string."
::= { agTacacsConfig 14 }
tacCurCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ backdoor for telnet/ssh/http/https."
::= { agTacacsConfig 15 }
tacNewCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ backdoor for telnet/ssh/http/https."
::= { agTacacsConfig 16 }
tacCurCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second TACACS+ authentication string."
::= { agTacacsConfig 17 }
tacNewCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second TACACS+ authentication string."
::= { agTacacsConfig 18 }
tacCurCfgCmdAuthor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command authorization."
::= { agTacacsConfig 19 }
tacNewCfgCmdAuthor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command authorization."
::= { agTacacsConfig 20 }
tacCurCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ secure backdoor for telnet."
::= { agTacacsConfig 23 }
tacNewCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ secure backdoor for telnet."
::= { agTacacsConfig 24 }
tacCurCfgCmdLogging OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command logging."
::= { agTacacsConfig 21 }
tacNewCfgCmdLogging OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command logging."
::= { agTacacsConfig 22 }
tacCurCfgCmap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable Tacacs+ new prividlege level maping."
::= { agTacacsConfig 25 }
tacNewCfgCmap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Tacacs+ new prividlege level maping."
::= { agTacacsConfig 26 }
agTacacsUserMapCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgTacacsUserMapCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of tacacs+ user map current configuration."
::= { agTacacsConfig 31 }
agTacacsUserMapCurCfgTableEntry OBJECT-TYPE
SYNTAX AgTacacsUserMapCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the tacacs+ user mapping table."
INDEX { agTacacsUserMapCurCfgUId }
::= { agTacacsUserMapCurCfgTable 1 }
AgTacacsUserMapCurCfgTableEntry ::= SEQUENCE {
agTacacsUserMapCurCfgUId Integer32,
agTacacsUserMapCurCfgMapping INTEGER
}
agTacacsUserMapCurCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current config remote privilege identifier."
::= { agTacacsUserMapCurCfgTableEntry 1 }
agTacacsUserMapCurCfgMapping OBJECT-TYPE
SYNTAX INTEGER {
none(0),
user(1),
oper(2),
admin(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Tacacs+ user privilege mappings."
::= { agTacacsUserMapCurCfgTableEntry 2 }
agTacacsUserMapNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgTacacsUserMapNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of tacacs+ user map new configuration."
::= { agTacacsConfig 32 }
agTacacsUserMapNewCfgTableEntry OBJECT-TYPE
SYNTAX AgTacacsUserMapNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the tacacs+ user mapping table."
INDEX { agTacacsUserMapNewCfgUId }
::= { agTacacsUserMapNewCfgTable 1 }
AgTacacsUserMapNewCfgTableEntry ::= SEQUENCE {
agTacacsUserMapNewCfgUId Integer32,
agTacacsUserMapNewCfgMapping INTEGER
}
agTacacsUserMapNewCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The new config remote privilege identifier."
::= { agTacacsUserMapNewCfgTableEntry 1 }
agTacacsUserMapNewCfgMapping OBJECT-TYPE
SYNTAX INTEGER {
none(0),
user(1),
oper(2),
admin(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set new Tacacs+ user privilege mappings."
::= { agTacacsUserMapNewCfgTableEntry 2 }
-- Multiple Management network MIB objects
agMgmtNetTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Management
Network Table."
::= { agMgmtNetConfig 1 }
agCurCfgMgmtNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCurCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for Management Network definitions
in the current configuration block."
::= { agMgmtNetConfig 2 }
agCurCfgMgmtNetEntry OBJECT-TYPE
SYNTAX AgCurCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management network definition table."
INDEX { agCurCfgMgmtNetIndex }
::= { agCurCfgMgmtNetTable 1 }
AgCurCfgMgmtNetEntry ::= SEQUENCE {
agCurCfgMgmtNetIndex Integer32,
agCurCfgMgmtNetSubnet IpAddress,
agCurCfgMgmtNetMask IpAddress
}
agCurCfgMgmtNetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Management Network Definition table."
::= { agCurCfgMgmtNetEntry 1 }
agCurCfgMgmtNetSubnet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Management Network Address in the current_configuration
block."
::= { agCurCfgMgmtNetEntry 2 }
agCurCfgMgmtNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Management Network Mask in the current_configuration
block."
::= { agCurCfgMgmtNetEntry 3 }
agNewCfgMgmtNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgNewCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for Management Network definitions
in the new configuration block."
::= { agMgmtNetConfig 3 }
agNewCfgMgmtNetEntry OBJECT-TYPE
SYNTAX AgNewCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management network definition table."
INDEX { agNewCfgMgmtNetIndex }
::= { agNewCfgMgmtNetTable 1 }
AgNewCfgMgmtNetEntry ::= SEQUENCE {
agNewCfgMgmtNetIndex Integer32,
agNewCfgMgmtNetSubnet IpAddress,
agNewCfgMgmtNetMask IpAddress,
agNewCfgMgmtNetDelete INTEGER
}
agNewCfgMgmtNetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Management Network Definition table."
::= { agNewCfgMgmtNetEntry 1 }
agNewCfgMgmtNetSubnet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Management Network Address in the new_configuration
block."
::= { agNewCfgMgmtNetEntry 2 }
agNewCfgMgmtNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Management Network Mask in the new_configuration
block."
::= { agNewCfgMgmtNetEntry 3 }
agNewCfgMgmtNetDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire row is deleted."
::= { agNewCfgMgmtNetEntry 4 }
agMgmtNetClear OBJECT-TYPE
SYNTAX INTEGER {
other(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire table is cleared."
::= { agMgmtNetConfig 4 }
agAccessUserMaxUserID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of Users ID."
::= { agAccess 1 }
agAccessUserCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAccessUserCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Access user configuration."
::= { agAccess 2 }
agAccessUserCurCfgTableEntry OBJECT-TYPE
SYNTAX AgAccessUserCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Access user configuration table."
INDEX { agAccessUserCurCfgUId }
::= { agAccessUserCurCfgTable 1 }
AgAccessUserCurCfgTableEntry ::= SEQUENCE {
agAccessUserCurCfgUId Integer32,
agAccessUserCurCos INTEGER,
agAccessUserCurCfgName DisplayString,
agAccessUserCurCfgPswd DisplayString,
agAccessUserCurCfgState INTEGER
}
agAccessUserCurCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User identifier."
::= { agAccessUserCurCfgTableEntry 1 }
agAccessUserCurCos OBJECT-TYPE
SYNTAX INTEGER {
user(0),
oper(3),
admin(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user class of service."
::= { agAccessUserCurCfgTableEntry 2 }
agAccessUserCurCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name."
::= { agAccessUserCurCfgTableEntry 3 }
agAccessUserCurCfgPswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The character string representing the user passworde."
::= { agAccessUserCurCfgTableEntry 4 }
agAccessUserCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a user."
::= { agAccessUserCurCfgTableEntry 5 }
agAccessUserNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAccessUserNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Access user configuration."
::= { agAccess 3 }
agAccessUserNewCfgTableEntry OBJECT-TYPE
SYNTAX AgAccessUserNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Access user configuration table."
INDEX { agAccessUserNewCfgUId }
::= { agAccessUserNewCfgTable 1 }
AgAccessUserNewCfgTableEntry ::= SEQUENCE {
agAccessUserNewCfgUId Integer32,
agAccessUserNewCos INTEGER,
agAccessUserNewCfgName DisplayString,
agAccessUserNewCfgPswd DisplayString,
agAccessUserNewCfgState INTEGER,
agAccessUserNewCfgDelete INTEGER
}
agAccessUserNewCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User identifier."
::= { agAccessUserNewCfgTableEntry 1 }
agAccessUserNewCos OBJECT-TYPE
SYNTAX INTEGER {
user(0),
oper(3),
admin(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user class of service."
::= { agAccessUserNewCfgTableEntry 2 }
agAccessUserNewCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user name."
::= { agAccessUserNewCfgTableEntry 3 }
agAccessUserNewCfgPswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The character string representing the user passworde."
::= { agAccessUserNewCfgTableEntry 4 }
agAccessUserNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a user."
::= { agAccessUserNewCfgTableEntry 5 }
agAccessUserNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User"
::= { agAccessUserNewCfgTableEntry 6 }
-- Statistics Group
-- Packet Statistics Group
-- This group represents Packet Statistics information
pktStatsAllocs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { pktStats 1 }
pktStatsFrees OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of times the packet buffers are freed(released) to the
packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 2 }
pktStatsAllocFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocation failures from the packet buffer
pool by the TCP/IP protocol stack."
::= { pktStats 3}
pktStatsMediums OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size greater than 128 bytes
and less than or equal to 1536 bytes from the packet buffer pool by
the TCP/IP protocol stack."
::= { pktStats 4}
pktStatsJumbos OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size larger than 1536 bytes
from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 5}
pktStatsSmalls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size less than or eqaul to
128 bytes from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 6}
pktStatsMediumsHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size greater than
128 bytes and less than or equal to 1536 bytes from the packet
buffer pool by the TCP/IP protocol stack."
::= { pktStats 7}
pktStatsJumbosHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size larger than
1536 bytes from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 8}
pktStatsSmallsHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size less than or
eqaul to 128 bytes from the packet buffer pool by the TCP/IP
protocol stack."
::= { pktStats 9}
-- MP CPU Statisitics Group
mpCpuStatsUtil1Second OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 second. It shows the percentage."
::= { mpCpuStats 1}
mpCpuStatsUtil4Seconds OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 4 seconds.
It shows the percentage."
::= { mpCpuStats 2}
mpCpuStatsUtil64Seconds OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 64 seconds.
It shows the percentage."
::= { mpCpuStats 3}
--
-- Port statistics table
--
portStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port statistics."
::= { portStats 1 }
portStatsTableEntry OBJECT-TYPE
SYNTAX PortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port stats table."
INDEX { portStatsIndx }
::= { portStatsTable 1 }
PortStatsTableEntry ::=
SEQUENCE {
portStatsIndx
Integer32,
portStatsPhyIfInOctets
Counter32,
portStatsPhyIfInUcastPkts
Counter32,
portStatsPhyIfInNUcastPkts
Counter32,
portStatsPhyIfInDiscards
Counter32,
portStatsPhyIfInErrors
Counter32,
portStatsPhyIfInUnknownProtos
Counter32,
portStatsPhyIfOutOctets
Counter32,
portStatsPhyIfOutUcastPkts
Counter32,
portStatsPhyIfOutNUcastPkts
Counter32,
portStatsPhyIfOutDiscards
Counter32,
portStatsPhyIfOutErrors
Counter32,
portStatsPhyIfOutQLen
Gauge32,
portStatsPhyIfInBroadcastPkts
Counter32,
portStatsPhyIfOutBroadcastPkts
Counter32,
portStatsPhyIfInMulticastPkts
Counter32,
portStatsPhyIfOutMulticastPkts
Counter32,
portStatsClear
INTEGER
}
portStatsIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portStatsTableEntry 1 }
portStatsPhyIfInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the
interface, including framing characters."
::= { portStatsTableEntry 2 }
portStatsPhyIfInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of subnetwork-unicast packets
delivered to a higher-layer protocol."
::= { portStatsTableEntry 3 }
portStatsPhyIfInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol."
::= { portStatsTableEntry 4 }
portStatsPhyIfInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."
::= { portStatsTableEntry 5 }
portStatsPhyIfInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portStatsTableEntry 6 }
portStatsPhyIfInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol."
::= { portStatsTableEntry 7 }
portStatsPhyIfOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::= { portStatsTableEntry 8 }
portStatsPhyIfOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent."
::= { portStatsTableEntry 9 }
portStatsPhyIfOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent."
::= { portStatsTableEntry 10 }
portStatsPhyIfOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."
::= { portStatsTableEntry 11 }
portStatsPhyIfOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that could not be
transmitted because of errors."
::= { portStatsTableEntry 12 }
portStatsPhyIfOutQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the output packet queue (in
packets)."
::= { portStatsTableEntry 13 }
portStatsPhyIfInBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer."
::= { portStatsTableEntry 14 }
portStatsPhyIfOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent."
::= { portStatsTableEntry 15 }
portStatsPhyIfInMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer."
::= { portStatsTableEntry 17 }
portStatsPhyIfOutMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent."
::= { portStatsTableEntry 18 }
portStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(1) clears the stats for this port."
::= { portStatsTableEntry 16 }
-- 802.1x port stats table
dot1xPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xPortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 802.1x port statistics."
::= { portStats 2 }
dot1xPortStatsTableEntry OBJECT-TYPE
SYNTAX Dot1xPortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the 802.1x port stats table."
INDEX { dot1xPortStatsIndx }
::= { dot1xPortStatsTable 1 }
Dot1xPortStatsTableEntry ::=
SEQUENCE {
dot1xPortStatsIndx Integer32,
eapolFramesRx Integer32,
eapolFramesTx Integer32,
eapolStartFramesRx Integer32,
eapolLogoffFramesRx Integer32,
eapolRespIdFramesRx Integer32,
eapolRespFramesRx Integer32,
eapolReqIdFramesTx Integer32,
eapolReqFramesTx Integer32,
invalidEapolFramesRx Integer32,
eapLengthErrorFramesRx Integer32,
authEntersConnecting Integer32,
authEapLogoffsWhileConnecting Integer32,
authEntersAuthenticating Integer32,
authSuccessesWhileAuthenticating Integer32,
authTimeoutsWhileAuthenticating Integer32,
authFailWhileAuthenticating Integer32,
authReauthsWhileAuthenticating Integer32,
authEapStartsWhileAuthenticating Integer32,
authEapLogoffWhileAuthenticating Integer32,
authReauthsWhileAuthenticated Integer32,
authEapStartsWhileAuthenticated Integer32,
authEapLogoffWhileAuthenticated Integer32,
backendResponses Integer32,
backendAccessChallenges Integer32,
backendOtherRequestsToSupplicant Integer32,
backendNonNakResponsesFromSupplicant Integer32,
backendAuthSuccesses Integer32,
backendAuthFails Integer32,
lastEapolFrameVersion Integer32,
lastEapolFrameSource MacAddress
}
dot1xPortStatsIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1x port stats index."
::= { dot1xPortStatsTableEntry 1 }
eapolFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 2 }
eapolFramesTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 3 }
eapolStartFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 4 }
eapolLogoffFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 5 }
eapolRespIdFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 6 }
eapolRespFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 7 }
eapolReqIdFramesTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 8 }
eapolReqFramesTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 9 }
invalidEapolFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {dot1xPortStatsTableEntry 10 }
eapLengthErrorFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 11 }
authEntersConnecting OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 12 }
authEapLogoffsWhileConnecting OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 13 }
authEntersAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 14 }
authSuccessesWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 15 }
authTimeoutsWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 16 }
authFailWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 17 }
authReauthsWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 18 }
authEapStartsWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 19 }
authEapLogoffWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 20 }
authReauthsWhileAuthenticated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 21 }
authEapStartsWhileAuthenticated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 22 }
authEapLogoffWhileAuthenticated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 23 }
backendResponses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 24 }
backendAccessChallenges OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 25 }
backendOtherRequestsToSupplicant OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 26 }
backendNonNakResponsesFromSupplicant OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 27 }
backendAuthSuccesses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 28 }
backendAuthFails OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 29 }
lastEapolFrameVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 30 }
lastEapolFrameSource OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 31 }
allportsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AllportsStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of all ports statistics."
::= { portStats 3 }
allportsStatsTableEntry OBJECT-TYPE
SYNTAX AllportsStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of all ports statistics."
INDEX { allportsStatsIndx }
::= { allportsStatsTable 1 }
AllportsStatsTableEntry ::=
SEQUENCE {
allportsStatsIndx Integer32,
allportsStatsDescr DisplayString,
allportsStatsSpeed INTEGER,
allportsStatsPhysAddress PhysAddress,
allportsStatsAdminStatus INTEGER,
allportsStatsOperStatus INTEGER,
allportsStatsInOctets Counter32,
allportsStatsOutOctets Counter32,
allportsStatsInPkts Counter32,
allportsStatsOutPkts Counter32,
allportsStatsInUcast DisplayString,
allportsStatsOutUcast DisplayString,
allportsStatsInBcast DisplayString,
allportsStatsOutBcast DisplayString,
allportsStatsInMcast DisplayString,
allportsStatsOutMcast DisplayString,
allportsStatsInDiscards Counter32,
allportsStatsOutDiscards Counter32,
allportsStatsInErrors Counter32,
allportsStatsOutErrors Counter32,
allportsStatsInUnknownProtos DisplayString,
allportsStatsOutQLen DisplayString
,
allportsStatsipInReceives Counter32,
allportsStatsipInHeaderErrors Counter32,
allportsStatsipInDiscards Counter32
,
allportsStatsLinkStateChange Counter32
}
allportsStatsIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number."
::= { allportsStatsTableEntry 1 }
allportsStatsDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..5))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description."
::= { allportsStatsTableEntry 2 }
allportsStatsSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
mbs1000(4),
any(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational speed of the port."
::= { allportsStatsTableEntry 3 }
allportsStatsPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port MAC Address."
::= { allportsStatsTableEntry 4 }
allportsStatsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port Admin state."
::= { allportsStatsTableEntry 5 }
allportsStatsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port Operational Status."
::= { allportsStatsTableEntry 6 }
allportsStatsInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets In for port."
::= { allportsStatsTableEntry 7 }
allportsStatsOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets Out for port."
::= { allportsStatsTableEntry 8 }
allportsStatsInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets In for port."
::= { allportsStatsTableEntry 9 }
allportsStatsOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets Out for port."
::= { allportsStatsTableEntry 10 }
allportsStatsInUcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets In for port."
::= { allportsStatsTableEntry 11 }
allportsStatsOutUcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets Out for port."
::= { allportsStatsTableEntry 12 }
allportsStatsInBcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets In for port."
::= { allportsStatsTableEntry 13 }
allportsStatsOutBcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets Out for port."
::= { allportsStatsTableEntry 14 }
allportsStatsInMcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets In for port."
::= { allportsStatsTableEntry 15 }
allportsStatsOutMcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets Out for port."
::= { allportsStatsTableEntry 16 }
allportsStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded Packets for port."
::= { allportsStatsTableEntry 17 }
allportsStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Packets for port."
::= { allportsStatsTableEntry 18 }
allportsStatsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Packets for port."
::= { allportsStatsTableEntry 19 }
allportsStatsOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not sent packets due to error."
::= { allportsStatsTableEntry 20 }
allportsStatsInUnknownProtos OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown protocol packets."
::= { allportsStatsTableEntry 21 }
allportsStatsOutQLen OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Packet Queue Length."
::= { allportsStatsTableEntry 22 }
allportsStatsipInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Receives."
::= { allportsStatsTableEntry 23 }
allportsStatsipInHeaderErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Header Errors."
::= { allportsStatsTableEntry 24 }
allportsStatsipInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Discards."
::= { allportsStatsTableEntry 25 }
allportsStatsLinkStateChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of link state changes."
::= { allportsStatsTableEntry 26 }
clearPortsStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the statistics for all ports."
::= { portStats 4 }
agDiffState OBJECT-TYPE
SYNTAX INTEGER {
diff(1),
flashdiff(2),
idle(3),
inprogress(4),
complete(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(3) indicates that there is no diff in progess.
complete(5) indicates that the last diff operation is completed.
Setting the value to diff(1), will start a new diff operation
Diff compares the new configuration with the current configuration
and shows the pending configuration changes.
Setting the value to flashdiff(1), will start a new diff operation.
flashdiff compares new configuration with the flash configuration.
To read the configuration changes use the agDiffTable once the
state of this variable returns complete."
::= { agDiff 2 }
agDiffTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the diff table."
::= { agDiff 3 }
agDiffTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgDiffTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of URL path for URL load balancing in the current_config."
::= { agDiff 4 }
agDiffTableEntry OBJECT-TYPE
SYNTAX AgDiffTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an URL path for URL load balancing."
INDEX { agDiffIndex }
::= { agDiffTable 1 }
AgDiffTableEntry ::= SEQUENCE {
agDiffIndex Integer32,
agDiffString OCTET STRING
}
agDiffIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agDiffTableEntry 1 }
agDiffString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the diff table."
::= { agDiffTableEntry 2 }
-- Config Dump
agCfgDumpState OBJECT-TYPE
SYNTAX INTEGER {
dump(1),
idle(2),
inprogress(3),
complete(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(2) indicates that there is no dump in progess.
complete(4) indicates that the last dump operation is completed.
Setting the value to dump(1), will start a new dump operation
Dump will show the current configuration.
To read the configuration dump use the agCfgDumpTable once the
state of this variable returns complete.
Once the agCfgDumpTable is read the state should be set back to
'idle' which frees the dump buffer and others can issue a dump
command via SNMP."
::= { agCfgDump 2 }
agCfgDumpTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the dump table."
::= { agCfgDump 3 }
agCfgDumpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCfgDumpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of dump strings."
::= { agCfgDump 4 }
agCfgDumpTableEntry OBJECT-TYPE
SYNTAX AgCfgDumpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dump table."
INDEX { agCfgDumpIndex }
::= { agCfgDumpTable 1 }
AgCfgDumpTableEntry ::= SEQUENCE {
agCfgDumpIndex Integer32,
agCfgDumpString OCTET STRING
}
agCfgDumpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agCfgDumpTableEntry 1 }
agCfgDumpString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the dump table."
::= { agCfgDumpTableEntry 2 }
-- GeaPort Information
geaportInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GeaportInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gea port mapping."
::= { geaportInfo 1 }
geaportInfoTableEntry OBJECT-TYPE
SYNTAX GeaportInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the geaport table mapping."
INDEX { geaportInfoLogicalIndex }
::= { geaportInfoTable 1 }
GeaportInfoTableEntry ::= SEQUENCE {
geaportInfoLogicalIndex Integer32,
geaportInfoPort INTEGER,
geaportInfoUnit INTEGER
}
geaportInfoLogicalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port index."
::= { geaportInfoTableEntry 1 }
geaportInfoPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Port (0-based)."
::= { geaportInfoTableEntry 2 }
geaportInfoUnit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Unit."
::= { geaportInfoTableEntry 3 }
-- UFDFO Information
ufdInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink Failure Detection State."
::= { ufdInfo 1 }
ufdInfoLtMStatus OBJECT-TYPE
SYNTAX INTEGER{
up(1),
down(2),
forwarding(3),
blocked(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LtM Status."
::= { ufdInfo 2 }
ufdInfoLtMPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM."
::= { ufdInfo 3 }
ufdInfoLtMTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM."
::= { ufdInfo 4 }
ufdInfoLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM admin key."
::= { ufdInfo 5 }
ufdInfoLtDStatus OBJECT-TYPE
SYNTAX INTEGER{
up(1),
autoDisabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LtD status."
::= { ufdInfo 6 }
ufdInfoLtDPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD."
::= { ufdInfo 7 }
ufdInfoLtDTrunks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD."
::= { ufdInfo 8 }
ufdInfoLtDAdminkeyMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the LtD admin key configuration table."
::= { ufdInfo 9 }
ufdInfoLtDAdminkeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF UfdInfoLtDAdminkeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LtD admin key configuration."
::= { ufdInfo 10 }
ufdInfoLtDAdminkeyTableEntry OBJECT-TYPE
SYNTAX UfdInfoLtDAdminkeyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LtD admin key table."
INDEX { ufdInfoLtDAdminkey }
::= { ufdInfoLtDAdminkeyTable 1 }
UfdInfoLtDAdminkeyTableEntry ::= SEQUENCE {
ufdInfoLtDAdminkey INTEGER
}
ufdInfoLtDAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD admin key."
::= { ufdInfoLtDAdminkeyTableEntry 1 }
-- SFP Information
sfpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of external port SFP information."
::= { sfpInfo 1 }
sfpInfoTableEntry OBJECT-TYPE
SYNTAX SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the external port SFP information table."
INDEX { sfpInfoIndx }
::= { sfpInfoTable 1 }
SfpInfoTableEntry ::= SEQUENCE {
sfpInfoIndx Integer32,
sfpInfoPort DisplayString,
sfpInfoDevice DisplayString,
sfpInfoTXEnable INTEGER,
sfpInfoRXSignal INTEGER,
sfpInfoTXFault INTEGER,
sfpInfoApproved INTEGER
}
sfpInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external port SFX index."
::= { sfpInfoTableEntry 1 }
sfpInfoPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP alias."
::= { sfpInfoTableEntry 2 }
sfpInfoDevice OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP Device."
::= { sfpInfoTableEntry 3 }
sfpInfoTXEnable OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
enabled (2),
disabled (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP TX-Enable."
::= { sfpInfoTableEntry 4 }
sfpInfoRXSignal OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
lost (2),
ok (3),
notAvailable (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP RX-Signal."
::= { sfpInfoTableEntry 5 }
sfpInfoTXFault OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
fault (2),
none (3),
notAvailable (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP TX-Fault."
::= { sfpInfoTableEntry 6 }
sfpInfoApproved OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
notXFP (2),
notSFP (3),
yes (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP Approval."
::= { sfpInfoTableEntry 7 }
-- NTP Statisitics
ntpPrimaryServerReqSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP requests sent to Primary NTP Server."
::= { ntpStats 1 }
ntpPrimaryServerRespRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP responces received from Primary NTP Server."
::= { ntpStats 2 }
ntpPrimaryServerUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP Updates by Primary NTP Server."
::= { ntpStats 3 }
ntpSecondaryServerReqSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP requests sent to Secondary NTP Server."
::= { ntpStats 4 }
ntpSecondaryServerRespRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP responces received from Secondary NTP Server."
::= { ntpStats 5 }
ntpSecondaryServerUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP Updates by Secondary NTP Server."
::= { ntpStats 6 }
ntpLastUpdateServer OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of ntp server updated last time."
::= { ntpStats 7 }
ntpLastUpdateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time updated by ntp server."
::= { ntpStats 8 }
ntpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for ntp."
::= { ntpStats 9 }
ntpSystemCurrentTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current system time."
::= { ntpStats 10 }
aclStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ACL statistics."
::= { aclStats 1 }
aclStatsTableEntry OBJECT-TYPE
SYNTAX AclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about a particular ACL configuration entry."
INDEX { aclStatsIndex }
::= { aclStatsTable 1 }
AclStatsTableEntry ::= SEQUENCE {
aclStatsIndex Integer32,
aclStatsHits Counter32,
aclClearStats INTEGER
}
aclStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl index."
::= { aclStatsTableEntry 1 }
aclStatsHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hits for this ACL entry"
::= { aclStatsTableEntry 2 }
aclClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for the ACL."
::= { aclStatsTableEntry 3 }
-- Clear Statistics
snmpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the SNMP statistics."
::= { agClearStats 1 }
-- ----------------------------------------------------------------------------
-- } INSERT: bt2Switch
-- ----------------------------------------------------------------------------
layer2 OBJECT IDENTIFIER
::= { hpSwitchBladeType4-Mgmt 2 }
-- ----------------------------------------------------------------------------
-- { INSERT: bt2Physical
-- ----------------------------------------------------------------------------
layer2Configs OBJECT IDENTIFIER ::= { layer2 1 }
layer2Stats OBJECT IDENTIFIER ::= { layer2 2 }
layer2Info OBJECT IDENTIFIER ::= { layer2 3 }
layer2Oper OBJECT IDENTIFIER ::= { layer2 4 }
vlan OBJECT IDENTIFIER ::= { layer2Configs 1 }
trunkgroup OBJECT IDENTIFIER ::= { layer2Configs 2 }
stgCfg OBJECT IDENTIFIER ::= { layer2Configs 3 }
mirroring OBJECT IDENTIFIER ::= { layer2Configs 4 }
mstCfg OBJECT IDENTIFIER ::= { layer2Configs 5 }
lacp OBJECT IDENTIFIER ::= { layer2Configs 6 }
thash OBJECT IDENTIFIER ::= { layer2Configs 7 }
l2GeneralCfg OBJECT IDENTIFIER ::= { layer2Configs 8 }
ufd OBJECT IDENTIFIER ::= { layer2Configs 9 }
-- layer2Configs 10 is being used by failoverCfg in aosFailoverCfg.mib
dot1x OBJECT IDENTIFIER ::= { layer2Configs 11 }
fdb OBJECT IDENTIFIER ::= { layer2Configs 12 }
thashL2 OBJECT IDENTIFIER ::= { thash 1 }
mirrPortMirr OBJECT IDENTIFIER ::= { mirroring 1 }
mstGeneralCfg OBJECT IDENTIFIER ::= { mstCfg 1 }
mstCistCfg OBJECT IDENTIFIER ::= { mstCfg 2 }
ufdGeneralCfg OBJECT IDENTIFIER ::= { ufd 1 }
fdbGeneralCfg OBJECT IDENTIFIER ::= { fdb 1 }
dot1xCurCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 5 }
dot1xNewCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 6 }
fdbStats OBJECT IDENTIFIER ::= { layer2Stats 1 }
stpStats OBJECT IDENTIFIER ::= { layer2Stats 2 }
lacpStats OBJECT IDENTIFIER ::= { layer2Stats 3 }
ufdStats OBJECT IDENTIFIER ::= { layer2Stats 4 }
cistInfo OBJECT IDENTIFIER ::= { layer2Info 1 }
fdbInfo OBJECT IDENTIFIER ::= { layer2Info 2 }
stpInfo OBJECT IDENTIFIER ::= { layer2Info 3 }
lacpInfo OBJECT IDENTIFIER ::= { layer2Info 4 }
dot1xInfo OBJECT IDENTIFIER ::= { layer2Info 5 }
dot1pInfo OBJECT IDENTIFIER ::= { layer2Info 6 }
genInfo OBJECT IDENTIFIER ::= { layer2Info 7 }
vlanInfo OBJECT IDENTIFIER ::= { layer2Info 8 }
trunkGroupInfo OBJECT IDENTIFIER ::= { layer2Info 9 }
dot1xSystemInfo OBJECT IDENTIFIER ::= { dot1xInfo 2 }
cistGeneralInfo OBJECT IDENTIFIER ::= { cistInfo 1 }
-- VLAN group
vlanMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the VLAN configuration table."
::= { vlan 1 }
vlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 2 }
vlanCurCfgTableEntry OBJECT-TYPE
SYNTAX VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanCurCfgVlanId }
::= { vlanCurCfgTable 1 }
VlanCurCfgTableEntry ::= SEQUENCE {
vlanCurCfgVlanId Integer32,
vlanCurCfgVlanName DisplayString,
vlanCurCfgPorts OCTET STRING,
vlanCurCfgState INTEGER,
vlanCurCfgStg Integer32
}
vlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanCurCfgTableEntry 1 }
vlanCurCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanCurCfgTableEntry 2 }
vlanCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanCurCfgTableEntry 3 }
vlanCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanCurCfgTableEntry 4 }
vlanCurCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanCurCfgTableEntry 6 }
vlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 3 }
vlanNewCfgTableEntry OBJECT-TYPE
SYNTAX VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanNewCfgVlanId }
::= { vlanNewCfgTable 1 }
VlanNewCfgTableEntry ::= SEQUENCE {
vlanNewCfgVlanId Integer32,
vlanNewCfgVlanName DisplayString,
vlanNewCfgPorts OCTET STRING,
vlanNewCfgState INTEGER,
vlanNewCfgAddPort Integer32,
vlanNewCfgRemovePort Integer32,
vlanNewCfgDelete INTEGER,
vlanNewCfgStg Integer32
}
vlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanNewCfgTableEntry 1 }
vlanNewCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanNewCfgTableEntry 2 }
vlanNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanNewCfgTableEntry 3 }
vlanNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanNewCfgTableEntry 4 }
vlanNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to the specified VLAN. A '0' value is
returned when read."
::= { vlanNewCfgTableEntry 5 }
vlanNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from the specified VLAN. A '0'
value is returned when read."
::= { vlanNewCfgTableEntry 6 }
vlanNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN"
::= { vlanNewCfgTableEntry 7 }
vlanNewCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanNewCfgTableEntry 9 }
-- Trunk Group Group
trunkGroupTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in trunk group table."
::= { trunkgroup 1 }
trunkGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 2 }
trunkGroupCurCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupCurCfgIndex }
::= { trunkGroupCurCfgTable 1 }
TrunkGroupCurCfgTableEntry ::= SEQUENCE {
trunkGroupCurCfgIndex Integer32,
trunkGroupCurCfgPorts OCTET STRING,
trunkGroupCurCfgState INTEGER
}
trunkGroupCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupCurCfgTableEntry 1 }
trunkGroupCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupCurCfgTableEntry 2 }
trunkGroupCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupCurCfgTableEntry 3 }
trunkGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 3 }
trunkGroupNewCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupNewCfgIndex }
::= { trunkGroupNewCfgTable 1 }
TrunkGroupNewCfgTableEntry ::= SEQUENCE {
trunkGroupNewCfgIndex Integer32,
trunkGroupNewCfgPorts OCTET STRING,
trunkGroupNewCfgAddPort Integer32,
trunkGroupNewCfgRemovePort Integer32,
trunkGroupNewCfgState INTEGER,
trunkGroupNewCfgDelete INTEGER
}
trunkGroupNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupNewCfgTableEntry 1 }
trunkGroupNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupNewCfgTableEntry 2 }
trunkGroupNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added in the trunk group. When read, 0 is returned."
::= { trunkGroupNewCfgTableEntry 3 }
trunkGroupNewCfgRemovePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be deleted from the trunk group. when read, 0
is returned."
::= { trunkGroupNewCfgTableEntry 4 }
trunkGroupNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupNewCfgTableEntry 5 }
trunkGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { trunkGroupNewCfgTableEntry 6 }
-- Trunk hash
l2ThashCurCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable smac hash."
::= { thashL2 1 }
l2ThashNewCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable smac hash."
::= { thashL2 2 }
l2ThashCurCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dmac hash."
::= { thashL2 3 }
l2ThashNewCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dmac hash."
::= { thashL2 4 }
l2ThashCurCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable sip hash."
::= { thashL2 5 }
l2ThashNewCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sip hash."
::= { thashL2 6 }
l2ThashCurCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dip hash."
::= { thashL2 7 }
l2ThashNewCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dip hash."
::= { thashL2 8 }
-- Spanning Tree Group Configuration
-- This group specifies the additional configurations that are not
-- covered by the Bridge MIB (RFC 1493).
-- The relative Spanning Tree information can be retrieved or configured
-- using Bridge MIB with an unique community string for each group specified
-- in entLogicalTable of Entity MIB (RFC 2037).
--
stgCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group configuration."
::= { stgCfg 1 }
stgCurCfgTableEntry OBJECT-TYPE
SYNTAX StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgCurCfgIndex }
::= { stgCurCfgTable 1 }
StgCurCfgTableEntry ::= SEQUENCE {
stgCurCfgIndex Integer32,
stgCurCfgState INTEGER,
stgCurCfgPriority INTEGER,
stgCurCfgBrgHelloTime INTEGER,
stgCurCfgBrgForwardDelay INTEGER,
stgCurCfgBrgMaxAge INTEGER,
stgCurCfgVlanBmap OCTET STRING
}
stgCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgTableEntry 1 }
stgCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgCurCfgTableEntry 2 }
stgCurCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgCurCfgTableEntry 5 }
stgCurCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 6 }
stgCurCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 7 }
stgCurCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgCurCfgTableEntry 8 }
stgCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgCurCfgTableEntry 10 }
stgNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Groups configuration in the new_config."
::= { stgCfg 2 }
stgNewCfgTableEntry OBJECT-TYPE
SYNTAX StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgNewCfgIndex }
::= { stgNewCfgTable 1 }
StgNewCfgTableEntry ::= SEQUENCE {
stgNewCfgIndex Integer32,
stgNewCfgState INTEGER,
stgNewCfgDefaultCfg INTEGER,
stgNewCfgAddVlan Integer32,
stgNewCfgRemoveVlan Integer32,
stgNewCfgPriority INTEGER,
stgNewCfgBrgHelloTime INTEGER,
stgNewCfgBrgForwardDelay INTEGER,
stgNewCfgBrgMaxAge INTEGER,
stgNewCfgVlanBmap OCTET STRING
}
stgNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgTableEntry 1 }
stgNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgNewCfgTableEntry 2 }
stgNewCfgDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default-config(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything."
::= { stgNewCfgTableEntry 3 }
stgNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read."
::= {stgNewCfgTableEntry 4 }
stgNewCfgRemoveVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read."
::= { stgNewCfgTableEntry 5 }
stgNewCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgNewCfgTableEntry 8 }
stgNewCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 9 }
stgNewCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 10 }
stgNewCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgNewCfgTableEntry 11 }
stgNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgNewCfgTableEntry 13 }
stgCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
current_config."
::= { stgCfg 3 }
stgCurCfgPortTableEntry OBJECT-TYPE
SYNTAX StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgCurCfgStgIndex, stgCurCfgPortIndex }
::= { stgCurCfgPortTable 1 }
StgCurCfgPortTableEntry ::= SEQUENCE {
stgCurCfgStgIndex Integer32,
stgCurCfgPortIndex Integer32,
stgCurCfgPortState INTEGER,
stgCurCfgPortPriority INTEGER,
stgCurCfgPortPathCost INTEGER,
stgCurCfgPortLink INTEGER,
stgCurCfgPortEdge INTEGER,
stgCurCfgPortFastFwd INTEGER
}
stgCurCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgPortTableEntry 1 }
stgCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgCurCfgPortTableEntry 2 }
stgCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgCurCfgPortTableEntry 3 }
stgCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgCurCfgPortTableEntry 4 }
stgCurCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port."
::= { stgCurCfgPortTableEntry 5 }
stgCurCfgPortLink OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the port link."
::= { stgCurCfgPortTableEntry 6 }
stgCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port edge."
::= { stgCurCfgPortTableEntry 7 }
stgCurCfgPortFastFwd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port fast forwarding."
::= { stgCurCfgPortTableEntry 8 }
stgNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
new_config."
::= { stgCfg 4 }
stgNewCfgPortTableEntry OBJECT-TYPE
SYNTAX StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgNewCfgStgIndex, stgNewCfgPortIndex }
::= { stgNewCfgPortTable 1 }
StgNewCfgPortTableEntry ::= SEQUENCE {
stgNewCfgStgIndex Integer32,
stgNewCfgPortIndex Integer32,
stgNewCfgPortState INTEGER,
stgNewCfgPortPriority INTEGER,
stgNewCfgPortPathCost INTEGER,
stgNewCfgPortLink INTEGER,
stgNewCfgPortEdge INTEGER,
stgNewCfgPortFastFwd INTEGER
}
stgNewCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgPortTableEntry 1 }
stgNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgNewCfgPortTableEntry 2 }
stgNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgNewCfgPortTableEntry 3 }
stgNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgNewCfgPortTableEntry 4 }
stgNewCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port."
::= { stgNewCfgPortTableEntry 5 }
stgNewCfgPortLink OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the port link."
::= { stgNewCfgPortTableEntry 6 }
stgNewCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of port edge."
::= { stgNewCfgPortTableEntry 7 }
stgNewCfgPortFastFwd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of port fast forwarding."
::= { stgNewCfgPortTableEntry 8 }
-- MST Configuration
mstCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable MSTP/RSTP"
::= { mstGeneralCfg 1 }
mstNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable MSTP/RSTP"
::= { mstGeneralCfg 2 }
mstCurCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 3 }
mstNewCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 4 }
mstCurCfgRegionVersion OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstGeneralCfg 5 }
mstNewCfgRegionVersion OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Version of the MST Region."
::= { mstGeneralCfg 6 }
mstCurCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 7 }
mstNewCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 8 }
mstCurCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 9 }
mstNewCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 10 }
mstCistDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything."
::= { mstCistCfg 1 }
-- CIST Brige Configuration
mstCistBridgeCfg OBJECT IDENTIFIER ::= { mstCistCfg 2 }
mstCistCurCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 1 }
mstCistNewCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 2 }
mstCistCurCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 5 }
mstCistNewCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 6 }
mstCistCurCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 7 }
mstCistNewCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 8 }
mstCistCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 9 }
mstCistNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 10 }
mstCistNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be added to the CIST Group. A
'0' value is returned when read."
::= { mstCistBridgeCfg 11 }
-- CIST Port Configuration
mstCistCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 3 }
mstCistCurCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistCurCfgPortIndex }
::= { mstCistCurCfgPortTable 1 }
MstCistCurCfgPortTableEntry ::= SEQUENCE {
mstCistCurCfgPortIndex Integer32,
mstCistCurCfgPortPriority INTEGER,
mstCistCurCfgPortPathCost INTEGER,
mstCistCurCfgPortLinkType INTEGER,
mstCistCurCfgPortEdge INTEGER,
mstCistCurCfgPortStpState INTEGER,
mstCistCurCfgPortHelloTime INTEGER
}
mstCistCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistCurCfgPortTableEntry 1 }
mstCistCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistCurCfgPortTableEntry 2 }
mstCistCurCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistCurCfgPortTableEntry 3 }
mstCistCurCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { mstCistCurCfgPortTableEntry 4 }
mstCistCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Edge Port parameter."
::= { mstCistCurCfgPortTableEntry 5 }
mstCistCurCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistCurCfgPortTableEntry 6 }
mstCistCurCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistCurCfgPortTableEntry 7 }
mstCistNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 4 }
mstCistNewCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistNewCfgPortIndex }
::= { mstCistNewCfgPortTable 1 }
MstCistNewCfgPortTableEntry ::= SEQUENCE {
mstCistNewCfgPortIndex Integer32,
mstCistNewCfgPortPriority INTEGER,
mstCistNewCfgPortPathCost INTEGER,
mstCistNewCfgPortLinkType INTEGER,
mstCistNewCfgPortEdge INTEGER,
mstCistNewCfgPortStpState INTEGER,
mstCistNewCfgPortHelloTime INTEGER
}
mstCistNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistNewCfgPortTableEntry 1 }
mstCistNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistNewCfgPortTableEntry 2 }
mstCistNewCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistNewCfgPortTableEntry 3 }
mstCistNewCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means."
::= { mstCistNewCfgPortTableEntry 4 }
mstCistNewCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the Edge Port parameter."
::= { mstCistNewCfgPortTableEntry 5 }
mstCistNewCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistNewCfgPortTableEntry 6 }
mstCistNewCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistNewCfgPortTableEntry 7 }
-- Complete Port Mirroring
pmCurCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 1 }
pmNewCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 2 }
pmCurCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 3 }
pmCurCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmCurCfgPmirrMoniPortIndex, pmCurCfgPmirrMirrPortIndex }
::= { pmCurCfgPortMonitorTable 1 }
PmCurCfgPortMonitorEntry ::= SEQUENCE {
pmCurCfgPmirrMoniPortIndex Integer32,
pmCurCfgPmirrMirrPortIndex Integer32,
pmCurCfgPmirrDirection INTEGER
}
pmCurCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmCurCfgPortMonitorEntry 1 }
pmCurCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmCurCfgPortMonitorEntry 2 }
pmCurCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmCurCfgPortMonitorEntry 3 }
pmNewCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 4 }
pmNewCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
::= { pmNewCfgPortMonitorTable 1 }
PmNewCfgPortMonitorEntry ::= SEQUENCE {
pmNewCfgPmirrMoniPortIndex Integer32,
pmNewCfgPmirrMirrPortIndex Integer32,
pmNewCfgPmirrDirection INTEGER,
pmNewCfgPmirrDelete INTEGER,
pmNewCfgPmonDelete INTEGER
}
pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmNewCfgPortMonitorEntry 1 }
pmNewCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmNewCfgPortMonitorEntry 2 }
pmNewCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmNewCfgPortMonitorEntry 3 }
pmNewCfgPmirrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 4 }
pmNewCfgPmonDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 10 }
-- Link Aggregation Control Protocol Group
lacpCurSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 1 }
lacpNewSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 2 }
lacpCurSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 5 }
lacpNewSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 6 }
lacpCurPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 7 }
lacpCurPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpCurPortCfgTableId }
::= { lacpCurPortCfgTable 1 }
LacpCurPortCfgTableEntry ::= SEQUENCE {
lacpCurPortCfgTableId Integer32,
lacpCurPortState INTEGER,
lacpCurPortActorPortPriority INTEGER,
lacpCurPortActorAdminKey INTEGER
}
lacpCurPortCfgTableId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpCurPortCfgTableEntry 1 }
lacpCurPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpCurPortCfgTableEntry 2 }
lacpCurPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-only."
::= { lacpCurPortCfgTableEntry 3 }
lacpCurPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance."
::= { lacpCurPortCfgTableEntry 4 }
lacpNewPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 8 }
lacpNewPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpNewPortCfgTableId }
::= { lacpNewPortCfgTable 1 }
LacpNewPortCfgTableEntry ::= SEQUENCE {
lacpNewPortCfgTableId Integer32,
lacpNewPortState INTEGER,
lacpNewPortActorPortPriority INTEGER,
lacpNewPortActorAdminKey INTEGER
}
lacpNewPortCfgTableId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpNewPortCfgTableEntry 1 }
lacpNewPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpNewPortCfgTableEntry 2 }
lacpNewPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { lacpNewPortCfgTableEntry 3 }
lacpNewPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance."
::= { lacpNewPortCfgTableEntry 4 }
-- L2 general
upfastCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable uplink fast"
::= { l2GeneralCfg 1 }
upfastNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable uplink fast"
::= { l2GeneralCfg 2 }
updateCurCfgState OBJECT-TYPE
SYNTAX INTEGER (10..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UplinkFast station update rate: packets per second"
::= { l2GeneralCfg 3 }
updateNewCfgState OBJECT-TYPE
SYNTAX INTEGER (10..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"UplinkFast station update rate: packets per second"
::= { l2GeneralCfg 4 }
pvstCompatibilityCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable PVST+ compatibility"
::= { l2GeneralCfg 9 }
pvstCompatibilityNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable PVST+ compatibility"
::= { l2GeneralCfg 10 }
-- FDB Statistics
fdbStatsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the Forwarding Database."
::= { fdbStats 3 }
fdbStatsHiwat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Highest number of entries recorded at any given time in the
Forwarding Database."
::= { fdbStats 4 }
fdbStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear FDB statistics"
::= { fdbStats 11 }
-- STP Statistics
stgStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port statistics."
::= { stpStats 1 }
stgStatsPortTableEntry OBJECT-TYPE
SYNTAX StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about port of a particular Spanning Tree Group."
INDEX { stgStatsStpIndex, stgStatsPortIndex }
::= { stgStatsPortTable 1 }
StgStatsPortTableEntry ::= SEQUENCE {
stgStatsStpIndex Integer32,
stgStatsPortIndex Integer32,
stgStatsPortRcvCfgBpdus Counter32,
stgStatsPortRcvTcnBpdus Counter32,
stgStatsPortXmtCfgBpdus Counter32,
stgStatsPortXmtTcnBpdus Counter32
}
stgStatsStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 1 }
stgStatsPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 2 }
stgStatsPortRcvCfgBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's received on this port."
::= { stgStatsPortTableEntry 3 }
stgStatsPortRcvTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's received on this port."
::= { stgStatsPortTableEntry 4 }
stgStatsPortXmtCfgBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 5 }
stgStatsPortXmtTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 6 }
-- LACP Statistics
lacpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP Stats."
::= {lacpStats 1}
lacpStatsTableEntry OBJECT-TYPE
SYNTAX LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Lacp status info."
INDEX { lacpStatsIndex }
::= { lacpStatsTable 1 }
LacpStatsTableEntry ::= SEQUENCE {
lacpStatsIndex Integer32,
lacpdusRx Integer32,
markerpdusRx Integer32,
markerresponsepdusRx Integer32,
unknownRx Integer32,
illegalRx Integer32,
lacpdusTx Integer32,
markerpdusTx Integer32,
markerresponsepdusTx Integer32,
lacpClearStats INTEGER
}
lacpStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index"
::= {lacpStatsTableEntry 1}
lacpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid LACPDUs received"
::= {lacpStatsTableEntry 2}
markerpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker PDUs received"
::= {lacpStatsTableEntry 3}
markerresponsepdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker Rsp PDUs received"
::= {lacpStatsTableEntry 4}
unknownRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown version/TLV type"
::= {lacpStatsTableEntry 5}
illegalRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Illegal subtype received"
::= {lacpStatsTableEntry 6}
lacpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACPDUs transmitted"
::= {lacpStatsTableEntry 7}
markerpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Market PDUs transmitted"
::= {lacpStatsTableEntry 8}
markerresponsepdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Marker Rsp PDUs transmitted "
::= {lacpStatsTableEntry 9}
lacpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LACP statistics."
::= { lacpStatsTableEntry 10 }
-- UFD stats
ufdNoLtMLinkFailure OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 1}
ufdNoLtMLinkBlockingState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 2}
ufdNoLtDAutoDisabled OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= {ufdStats 3}
ufdClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Setting this value to clear(2) clears the UFD stats."
::= {ufdStats 4}
-- FDB stats
fdbClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the entire master FDB."
::= { fdbInfo 1 }
fdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { fdbInfo 2 }
fdbEntry OBJECT-TYPE
SYNTAX FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { fdbMacAddr }
::= { fdbTable 1 }
FdbEntry ::= SEQUENCE {
fdbMacAddr PhysAddress,
fdbVlan Integer32,
fdbSrcPort Integer32,
fdbSrcTrunk Integer32,
fdbState INTEGER,
fdbRefSps DisplayString,
fdbLearnedPort Integer32,
fdbStatus Integer32
}
fdbMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { fdbEntry 1 }
fdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { fdbEntry 2 }
fdbSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { fdbEntry 3 }
fdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
forward(2),
trunk(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group"
::= { fdbEntry 4 }
fdbRefSps OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The referenced SPs associated with this FDB entry."
::= { fdbEntry 5 }
fdbLearnedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The learned port associated with this FDB entry."
::= { fdbEntry 6 }
fdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { fdbEntry 7 }
fdbStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'1' if it is permanent
'0' if it is not permanent"
::= { fdbEntry 8 }
-- STP information
stpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group information."
::= { stpInfo 1 }
stpInfoTableEntry OBJECT-TYPE
SYNTAX StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group."
INDEX { stpInfoIndex }
::= { stpInfoTable 1 }
StpInfoTableEntry ::= SEQUENCE {
stpInfoIndex Integer32,
stpInfoState INTEGER,
stgInfoVlanBmap OCTET STRING,
stpInfoTimeSinceTopChange TimeTicks,
stpInfoTopChanges Counter32,
stpInfoDesignatedRoot BridgeId,
stpInfoRootCost Integer32,
stpInfoRootPort Integer32,
stpInfoHelloTime Integer32,
stpInfoMaxAge Integer32,
stpInfoForwardDelay Integer32,
stpInfoHoldTime Integer32,
stpInfoBrgPriority INTEGER,
stpInfoBrgHelloTime INTEGER,
stpInfoBrgForwardDelay INTEGER,
stpInfoBrgMaxAge INTEGER,
stpInfoAgingTime INTEGER
}
stpInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stpInfoTableEntry 1 }
stpInfoState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stpInfoTableEntry 2 }
stgInfoVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stpInfoTableEntry 3 }
stpInfoTimeSinceTopChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity."
::= { stpInfoTableEntry 4 }
stpInfoTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by this bridge since
the management entity was last reset or initialized."
::= { stpInfoTableEntry 5 }
stpInfoDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node."
::= { stpInfoTableEntry 6 }
stpInfoRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from this bridge."
::= { stpInfoTableEntry 7 }
stpInfoRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the lowest cost path from
this bridge to the root bridge."
::= { stpInfoTableEntry 8 }
stpInfoMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using."
::= { stpInfoTableEntry 9 }
stpInfoHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using."
::= { stpInfoTableEntry 10 }
stpInfoForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database."
::= { stpInfoTableEntry 11 }
stpInfoHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second."
::= { stpInfoTableEntry 12 }
stpInfoBrgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stpInfoTableEntry 13 }
stpInfoBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stpInfoTableEntry 14 }
stpInfoBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stpInfoTableEntry 15 }
stpInfoBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stpInfoTableEntry 16 }
stpInfoAgingTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out dynamically learned
forwarding information."
::= { stpInfoTableEntry 17 }
stpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port information."
::= { stpInfo 2 }
stpInfoPortTableEntry OBJECT-TYPE
SYNTAX StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration for a particular Spanning Tree
Group."
INDEX { stpInfoPortStpIndex, stpInfoPortIndex }
::= { stpInfoPortTable 1 }
StpInfoPortTableEntry ::= SEQUENCE {
stpInfoPortStpIndex Integer32,
stpInfoPortIndex Integer32,
stpInfoPortState INTEGER,
stpInfoPortDesignatedRoot BridgeId,
stpInfoPortDesignatedCost Integer32,
stpInfoPortDesignatedBridge BridgeId,
stpInfoPortDesignatedPort OCTET STRING,
stpInfoPortForwardTransitions Counter32,
stpInfoPortPathCost Integer32
}
stpInfoPortStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 1 }
stpInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 2 }
stpInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1)."
::= { stpInfoPortTableEntry 3 }
stpInfoPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached."
::= { stpInfoPortTableEntry 4 }
stpInfoPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs."
::= { stpInfoPortTableEntry 5 }
stpInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment."
::= { stpInfoPortTableEntry 6 }
stpInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated Bridge for this
port's segment."
::= { stpInfoPortTableEntry 7 }
stpInfoPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned from the Learning
state to the Forwarding state."
::= { stpInfoPortTableEntry 8 }
stpInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the port."
::= { stpInfoPortTableEntry 9 }
-- CIST Information
cistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 1 }
cistRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the CIST Root as seen from this bridge."
::= { cistGeneralInfo 2 }
cistRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge."
::= { cistGeneralInfo 3 }
cistRootHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs in seconds."
::= { cistGeneralInfo 4 }
cistRootMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { cistGeneralInfo 5 }
cistRootForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { cistGeneralInfo 6 }
cistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 7 }
cistRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root as seen from this
bridge."
::= { cistGeneralInfo 8 }
cistBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { cistGeneralInfo 9 }
cistBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { cistGeneralInfo 10 }
cistBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { cistGeneralInfo 11 }
cistMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { cistGeneralInfo 12 }
mstpDigest OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The digest of the mstp."
::= { cistGeneralInfo 13 }
-- CIST Port Information Table
cistInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port information."
::= { cistInfo 2 }
cistInfoPortTableEntry OBJECT-TYPE
SYNTAX CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port."
INDEX { cistInfoPortIndex }
::= { cistInfoPortTable 1 }
CistInfoPortTableEntry ::= SEQUENCE {
cistInfoPortIndex Integer32,
cistInfoPortPriority Integer32,
cistInfoPortPathCost Integer32,
cistInfoPortState INTEGER,
cistInfoPortRole INTEGER,
cistInfoPortDesignatedBridge BridgeId,
cistInfoPortDesignatedPort OCTET STRING,
cistInfoPortLinkType INTEGER,
cistInfoPortHelloTime INTEGER
}
cistInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { cistInfoPortTableEntry 1 }
cistInfoPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { cistInfoPortTableEntry 2 }
cistInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { cistInfoPortTableEntry 3 }
cistInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { cistInfoPortTableEntry 4 }
cistInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning tree instance."
::= { cistInfoPortTableEntry 5 }
cistInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { cistInfoPortTableEntry 6 }
cistInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { cistInfoPortTableEntry 7 }
cistInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port is being treated as
having a shared media connection."
::= { cistInfoPortTableEntry 8 }
cistInfoPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { cistInfoPortTableEntry 9 }
-- LACP information
lacpInfoAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP aggregator information."
::= { lacpInfo 1 }
lacpInfoAggrTableEntry OBJECT-TYPE
SYNTAX LacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a LACP aggregator."
INDEX { lacpInfoAggrIndex }
::= { lacpInfoAggrTable 1 }
LacpInfoAggrTableEntry ::= SEQUENCE {
lacpInfoAggrIndex Integer32,
lacpInfoAggrId Integer32,
lacpInfoAggrMac DisplayString,
lacpInfoAggrActSysPrio Integer32,
lacpInfoAggrActSysId DisplayString,
lacpInfoAggrIndivState INTEGER,
lacpInfoAggrActAdminKey Integer32,
lacpInfoAggrActOperKey Integer32,
lacpInfoAggrPartSysPrio Integer32,
lacpInfoAggrPartSysId DisplayString,
lacpInfoAggrPartOperKey Integer32,
lacpInfoAggrReadyState INTEGER,
lacpInfoAggrNumPorts Integer32,
lacpInfoAggrPorts DisplayString
}
lacpInfoAggrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregator identifier."
::= { lacpInfoAggrTableEntry 1 }
lacpInfoAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 2 }
lacpInfoAggrMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 3 }
lacpInfoAggrActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 4 }
lacpInfoAggrActSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 5 }
lacpInfoAggrIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 6 }
lacpInfoAggrActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 7 }
lacpInfoAggrActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 8 }
lacpInfoAggrPartSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 9 }
lacpInfoAggrPartSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 10 }
lacpInfoAggrPartOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 11 }
lacpInfoAggrReadyState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 12 }
lacpInfoAggrNumPorts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 13 }
lacpInfoAggrPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoAggrTableEntry 14 }
lacpInfoPort OBJECT IDENTIFIER ::= { lacpInfo 2 }
lacpInfoPortGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port general information."
::= { lacpInfoPort 1 }
lacpInfoPortGeneralTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"General information about a LACP port."
INDEX { lacpInfoPortGeneralIndex }
::= { lacpInfoPortGeneralTable 1 }
LacpInfoPortGeneralTableEntry ::= SEQUENCE {
lacpInfoPortGeneralIndex Integer32,
lacpInfoPortLacpEna INTEGER,
lacpInfoPortAdminEna INTEGER,
lacpInfoPortActSysId DisplayString,
lacpInfoPortActSysPrio Integer32,
lacpInfoPortActAdminKey Integer32,
lacpInfoPortActOperKey Integer32,
lacpInfoPortActPortNum Integer32,
lacpInfoPortActPortPrio Integer32,
lacpInfoPortIndivState INTEGER,
lacpInfoSelAggrId Integer32,
lacpInfoAttAggrId Integer32,
lacpInfoPortReadyN INTEGER,
lacpInfoPortNtt INTEGER,
lacpInfoPortSelected INTEGER,
lacpInfoPortMoved INTEGER,
lacpInfoCollDetState INTEGER,
lacpInfoPortRxState DisplayString,
lacpInfoPortMuxState DisplayString,
lacpInfoPortPerState DisplayString
}
lacpInfoPortGeneralIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortGeneralTableEntry 1 }
lacpInfoPortLacpEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 2 }
lacpInfoPortAdminEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 3 }
lacpInfoPortActSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 4 }
lacpInfoPortActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 5 }
lacpInfoPortActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 6 }
lacpInfoPortActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 7 }
lacpInfoPortActPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 8 }
lacpInfoPortActPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 9 }
lacpInfoPortIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 10 }
lacpInfoSelAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 11 }
lacpInfoAttAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 12 }
lacpInfoPortReadyN OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port."
::= { lacpInfoPortGeneralTableEntry 13 }
lacpInfoPortNtt OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link."
::= { lacpInfoPortGeneralTableEntry 14 }
lacpInfoPortSelected OBJECT-TYPE
SYNTAX INTEGER {
selected(1),
unselected(2),
standby(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently precent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition."
::= { lacpInfoPortGeneralTableEntry 15 }
lacpInfoPortMoved OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port."
::= { lacpInfoPortGeneralTableEntry 16 }
lacpInfoCollDetState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 17 }
lacpInfoPortRxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 18 }
lacpInfoPortMuxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 19 }
lacpInfoPortPerState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortGeneralTableEntry 20 }
lacpInfoPortAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port admin information."
::= { lacpInfoPort 2 }
lacpInfoPortAdminTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Admin information about a LACP port."
INDEX { lacpInfoPortAdminIndex }
::= { lacpInfoPortAdminTable 1 }
LacpInfoPortAdminTableEntry ::= SEQUENCE {
lacpInfoPortAdminIndex Integer32,
lacpInfoPortActAdPortState DisplayString,
lacpInfoPortActAdActiv INTEGER,
lacpInfoPortActAdSync INTEGER,
lacpInfoPortActAdDef INTEGER,
lacpInfoPortActAdTimeout INTEGER,
lacpInfoPortActAdColl INTEGER,
lacpInfoPortActAdExp INTEGER,
lacpInfoPortActAdAggr INTEGER,
lacpInfoPortActAdDist INTEGER
}
lacpInfoPortAdminIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortAdminTableEntry 1 }
lacpInfoPortActAdPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortAdminTableEntry 7 }
lacpInfoPortActAdActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 8 }
lacpInfoPortActAdSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 9 }
lacpInfoPortActAdDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 10 }
lacpInfoPortActAdTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 11 }
lacpInfoPortActAdColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 12 }
lacpInfoPortActAdExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 13 }
lacpInfoPortActAdAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 14 }
lacpInfoPortActAdDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortAdminTableEntry 15 }
lacpInfoPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port oper information."
::= { lacpInfoPort 3 }
lacpInfoPortOperTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Oper information about a LACP port."
INDEX { lacpInfoPortOperIndex }
::= { lacpInfoPortOperTable 1 }
LacpInfoPortOperTableEntry ::= SEQUENCE {
lacpInfoPortOperIndex Integer32,
lacpInfoPortPartOpSysPrio Integer32,
lacpInfoPortPartOpSysId DisplayString,
lacpInfoPortPartOpKey Integer32,
lacpInfoPortPartOpPortNum Integer32,
lacpInfoPortPartOpPortPrio Integer32,
lacpInfoPortActOpPortState DisplayString,
lacpInfoPortActOpActiv INTEGER,
lacpInfoPortActOpSync INTEGER,
lacpInfoPortActOpDef INTEGER,
lacpInfoPortActOpTimeout INTEGER,
lacpInfoPortActOpColl INTEGER,
lacpInfoPortActOpExp INTEGER,
lacpInfoPortActOpAggr INTEGER,
lacpInfoPortActOpDist INTEGER,
lacpInfoPortPartOpPortState DisplayString,
lacpInfoPortPartOpActiv INTEGER,
lacpInfoPortPartOpSync INTEGER,
lacpInfoPortPartOpDef INTEGER,
lacpInfoPortPartOpTimeout INTEGER,
lacpInfoPortPartOpColl INTEGER,
lacpInfoPortPartOpExp INTEGER,
lacpInfoPortPartOpAggr INTEGER,
lacpInfoPortPartOpDist INTEGER
}
lacpInfoPortOperIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortOperTableEntry 1 }
lacpInfoPortPartOpSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 2 }
lacpInfoPortPartOpSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 3 }
lacpInfoPortPartOpKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 4 }
lacpInfoPortPartOpPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 5 }
lacpInfoPortPartOpPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 6 }
lacpInfoPortActOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortOperTableEntry 7 }
lacpInfoPortActOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 8 }
lacpInfoPortActOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 9 }
lacpInfoPortActOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 10 }
lacpInfoPortActOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 11 }
lacpInfoPortActOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 12 }
lacpInfoPortActOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 13 }
lacpInfoPortActOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 14 }
lacpInfoPortActOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 15 }
lacpInfoPortPartOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortOperTableEntry 16 }
lacpInfoPortPartOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 17 }
lacpInfoPortPartOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 18 }
lacpInfoPortPartOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 19 }
lacpInfoPortPartOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 20 }
lacpInfoPortPartOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 21 }
lacpInfoPortPartOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 22 }
lacpInfoPortPartOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 23 }
lacpInfoPortPartOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { lacpInfoPortOperTableEntry 24 }
-- UFD Configuration
ufdCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable UFD state"
::= { ufdGeneralCfg 1 }
ufdNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UFD state"
::= { ufdGeneralCfg 2 }
ufdCurCfgLtMPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM"
::= { ufdGeneralCfg 3 }
ufdNewCfgLtMPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM"
::= { ufdGeneralCfg 4 }
ufdCurCfgLtMTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM"
::= { ufdGeneralCfg 5 }
ufdNewCfgLtMTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM"
::= { ufdGeneralCfg 6 }
ufdCurCfgLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM admin key."
::= { ufdGeneralCfg 7 }
ufdNewCfgLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtM admin key."
::= { ufdGeneralCfg 8 }
ufdCurCfgLtDPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD"
::= { ufdGeneralCfg 9 }
ufdNewCfgLtDPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD"
::= { ufdGeneralCfg 10 }
ufdCurCfgLtDTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD"
::= { ufdGeneralCfg 11 }
ufdNewCfgLtDTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD"
::= { ufdGeneralCfg 12 }
ufdLtDAdminkeyMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the LtD admin key configuration table."
::= { ufdGeneralCfg 13 }
ufdLtDAdminkeyCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF UfdLtDAdminkeyCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LtD admin key configuration."
::= { ufdGeneralCfg 14 }
ufdLtDAdminkeyCurCfgTableEntry OBJECT-TYPE
SYNTAX UfdLtDAdminkeyCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LtD admin key table."
INDEX { ufdLtDAdminkeyCurCfg }
::= { ufdLtDAdminkeyCurCfgTable 1 }
UfdLtDAdminkeyCurCfgTableEntry ::= SEQUENCE {
ufdLtDAdminkeyCurCfg INTEGER
}
ufdLtDAdminkeyCurCfg OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD admin key."
::= { ufdLtDAdminkeyCurCfgTableEntry 1 }
ufdLtDAdminkeyNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF UfdLtDAdminkeyNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LtD admin key configuration."
::= { ufdGeneralCfg 15 }
ufdLtDAdminkeyNewCfgTableEntry OBJECT-TYPE
SYNTAX UfdLtDAdminkeyNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LtD admin key table."
INDEX { ufdLtDAdminkeyNewCfg }
::= { ufdLtDAdminkeyNewCfgTable 1 }
UfdLtDAdminkeyNewCfgTableEntry ::= SEQUENCE {
ufdLtDAdminkeyNewCfg INTEGER
}
ufdLtDAdminkeyNewCfg OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LtD admin key."
::= { ufdLtDAdminkeyNewCfgTableEntry 1 }
ufdNewCfgAddLtMPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 16 }
ufdNewCfgRemoveLtMPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 17 }
ufdNewCfgAddLtMTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 18 }
ufdNewCfgRemoveLtMTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 19 }
ufdNewCfgAddLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 20 }
ufdNewCfgRemoveLtMAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 21 }
ufdNewCfgAddLtDPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to LtD. A '0' value is
returned when read."
::= { ufdGeneralCfg 22 }
ufdNewCfgRemoveLtDPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from LtM. A '0'
value is returned when read."
::= { ufdGeneralCfg 23 }
ufdNewCfgAddLtDTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be added to LtM. A '0' value is
returned when read."
::= { ufdGeneralCfg 24 }
ufdNewCfgRemoveLtDTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trunk to be removed from LtD. A '0'
value is returned when read."
::= { ufdGeneralCfg 25 }
ufdNewCfgAddLtDAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be added to LtD. A '0' value is
returned when read."
::= { ufdGeneralCfg 26 }
ufdNewCfgRemoveLtDAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin key to be removed from LtD. A '0'
value is returned when read."
::= { ufdGeneralCfg 27 }
ufdCurCfgGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current global Failover settings."
::= { ufdGeneralCfg 28 }
ufdNewCfgGlobalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New global Failover settings."
::= { ufdGeneralCfg 29 }
--dot1x
dot1xCurStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Dot1x status "
::= { dot1x 1 }
dot1xNewStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dot1x status "
::= { dot1x 2 }
dot1xCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the Current_config."
::= { dot1x 3 }
dot1xCurCfgPortEntry OBJECT-TYPE
SYNTAX Dot1xCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xCurCfgPortIndex }
::= { dot1xCurCfgPortTable 1 }
Dot1xCurCfgPortEntry ::= SEQUENCE {
dot1xCurCfgPortIndex Integer32,
dot1xCurCfgPortMode INTEGER,
dot1xCurCfgPortQtPeriod INTEGER,
dot1xCurCfgPortTxPeriod INTEGER,
dot1xCurCfgPortSupTmout INTEGER,
dot1xCurCfgPortSrvTmout INTEGER,
dot1xCurCfgPortMaxRq INTEGER,
dot1xCurCfgPortRaPeriod INTEGER,
dot1xCurCfgPortReAuth INTEGER
}
dot1xCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xCurCfgPortEntry 1}
dot1xCurCfgPortMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Port authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
"
::= { dot1xCurCfgPortEntry 2 }
dot1xCurCfgPortQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Quiet period (0-65535) "
::= { dot1xCurCfgPortEntry 3 }
dot1xCurCfgPortTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Tx Period "
::= { dot1xCurCfgPortEntry 4 }
dot1xCurCfgPortSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Supplicant timeout (1..65535) "
::= { dot1xCurCfgPortEntry 5 }
dot1xCurCfgPortSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xCurCfgPortEntry 6 }
dot1xCurCfgPortMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Maximum numer of requests (1..10) "
::= { dot1xCurCfgPortEntry 7 }
dot1xCurCfgPortRaPeriod OBJECT-TYPE
SYNTAX INTEGER (0..604800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reautentication period (0..604800) "
::= { dot1xCurCfgPortEntry 8 }
dot1xCurCfgPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ReAuthentication state
off(0),
on(1)
"
::= { dot1xCurCfgPortEntry 9 }
dot1xNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the new_config."
::= { dot1x 4 }
dot1xNewCfgPortEntry OBJECT-TYPE
SYNTAX Dot1xNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xNewCfgPortIndex }
::= { dot1xNewCfgPortTable 1 }
Dot1xNewCfgPortEntry ::= SEQUENCE {
dot1xNewCfgPortIndex Integer32,
dot1xNewCfgPortMode INTEGER,
dot1xNewCfgPortQtPeriod INTEGER,
dot1xNewCfgPortTxPeriod INTEGER,
dot1xNewCfgPortSupTmout INTEGER,
dot1xNewCfgPortSrvTmout INTEGER,
dot1xNewCfgPortMaxRq INTEGER,
dot1xNewCfgPortRaPeriod INTEGER,
dot1xNewCfgPortReAuth INTEGER ,
dot1xNewCfgPortDefault INTEGER ,
dot1xNewCfgPortApplyGlobal INTEGER
}
dot1xNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xNewCfgPortEntry 1}
dot1xNewCfgPortMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Port authentication mode
forceUnauth(0),
auto(1),
forceAuth(2) "
::= { dot1xNewCfgPortEntry 2 }
dot1xNewCfgPortQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Quiet period (0..65535) "
::= { dot1xNewCfgPortEntry 3 }
dot1xNewCfgPortTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tx Period (1..65535) "
::= { dot1xNewCfgPortEntry 4 }
dot1xNewCfgPortSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Supplicant Timeout (1..65535) "
::= { dot1xNewCfgPortEntry 5 }
dot1xNewCfgPortSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Server Timeout (1..65535) "
::= { dot1xNewCfgPortEntry 6 }
dot1xNewCfgPortMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xNewCfgPortEntry 7 }
dot1xNewCfgPortRaPeriod OBJECT-TYPE
SYNTAX INTEGER (1..604800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication period (1..604800) "
::= { dot1xNewCfgPortEntry 8 }
dot1xNewCfgPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication state
off(0),
on(1) "
::= { dot1xNewCfgPortEntry 9 }
dot1xNewCfgPortDefault OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Port default settings "
::= { dot1xNewCfgPortEntry 10 }
dot1xNewCfgPortApplyGlobal OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Apply Global config "
::= { dot1xNewCfgPortEntry 11 }
dot1xCurCfgGlobalMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Autehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2) "
::= { dot1xCurCfgGlobalTable 1 }
dot1xCurCfgGlobalQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Quiet period (0..65535) "
::= { dot1xCurCfgGlobalTable 2 }
dot1xCurCfgGlobalTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Tx period (1..65535) "
::= { dot1xCurCfgGlobalTable 3 }
dot1xCurCfgGlobalSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Supplicant timeout (1..65535) "
::= { dot1xCurCfgGlobalTable 4 }
dot1xCurCfgGlobalSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xCurCfgGlobalTable 5 }
dot1xCurCfgGlobalMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xCurCfgGlobalTable 6 }
dot1xCurCfgGlobalRaPeriod OBJECT-TYPE
SYNTAX INTEGER (0..604800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reauthentication period (0..604800) "
::= { dot1xCurCfgGlobalTable 7 }
dot1xCurCfgGlobalReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { dot1xCurCfgGlobalTable 8 }
dot1xNewCfgGlobalMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Authentication Mode "
::= { dot1xNewCfgGlobalTable 1 }
dot1xNewCfgGlobalQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Quiet Period (0..65535) "
::= { dot1xNewCfgGlobalTable 2 }
dot1xNewCfgGlobalTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tx Period (1..65535) "
::= { dot1xNewCfgGlobalTable 3 }
dot1xNewCfgGlobalSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Supplicand timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 4 }
dot1xNewCfgGlobalSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 5 }
dot1xNewCfgGlobalMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xNewCfgGlobalTable 6 }
dot1xNewCfgGlobalRaPeriod OBJECT-TYPE
SYNTAX INTEGER (1..604800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication period (1..604800) "
::= { dot1xNewCfgGlobalTable 7 }
dot1xNewCfgGlobalReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication status "
::= { dot1xNewCfgGlobalTable 8 }
dot1xInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the Current_config."
::= { dot1xInfo 1 }
dot1xInfoPortEntry OBJECT-TYPE
SYNTAX Dot1xInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xInfoPortIndex }
::= { dot1xInfoPortTable 1 }
Dot1xInfoPortEntry ::= SEQUENCE {
dot1xInfoPortIndex Integer32,
dot1xInfoPortAuthMode INTEGER,
dot1xInfoPortAuthStatus INTEGER,
dot1xInfoPortCtrlDir INTEGER,
dot1xInfoPortAuthPAEState INTEGER,
dot1xInfoPortBackAuthState INTEGER
}
dot1xInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xInfoPortEntry 1}
dot1xInfoPortAuthMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authentication mode "
::= { dot1xInfoPortEntry 2 }
dot1xInfoPortAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
authorized(0),
unauthorized(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authentication status "
::= { dot1xInfoPortEntry 3 }
dot1xInfoPortCtrlDir OBJECT-TYPE
SYNTAX INTEGER {
both(0),
in(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Controlled Directions "
::= { dot1xInfoPortEntry 4 }
dot1xInfoPortAuthPAEState OBJECT-TYPE
SYNTAX INTEGER {
initialize(0),
disconnected(1),
connecting(2),
authenticating(3),
authenticated(4),
aborting(5),
held(6),
forceauth(7),
forceunauth(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authenticator PAE State "
::= { dot1xInfoPortEntry 5 }
dot1xInfoPortBackAuthState OBJECT-TYPE
SYNTAX INTEGER {
request(0),
response(1),
success(2),
fail(3),
timeout(4),
idle(5),
initialize(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Backend authenticator PAE state "
::= { dot1xInfoPortEntry 6 }
dot1xSystemCapability OBJECT-TYPE
SYNTAX INTEGER {
authenticator(0),
supplicant(1),
authenticatorAndSupplicant(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" System capability "
::= { dot1xSystemInfo 1 }
dot1xSystemStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" System status "
::= { dot1xSystemInfo 2 }
dot1xSystemProtoVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Protocol version "
::= { dot1xSystemInfo 3 }
-- FDB
fdbCurCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fdb current aging time"
::= { fdbGeneralCfg 1 }
fdbNewCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fdb new aging time."
::= { fdbGeneralCfg 2 }
fdbCurCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbCurCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 3 }
fdbCurCfgStaticEntry OBJECT-TYPE
SYNTAX FdbCurCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbCurCfgEntryIndex }
::= { fdbCurCfgStaticTable 1 }
FdbCurCfgStaticEntry ::= SEQUENCE {
fdbCurCfgEntryIndex Integer32,
fdbCurCfgVlan Integer32,
fdbCurCfgPort Integer32,
fdbCurCfgMac PhysAddress
}
fdbCurCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbCurCfgStaticEntry 1 }
fdbCurCfgVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add vlan for fdb entry index"
::= { fdbCurCfgStaticEntry 2 }
fdbCurCfgPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbCurCfgStaticEntry 3 }
fdbCurCfgMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add a fdb entry."
::= { fdbCurCfgStaticEntry 4 }
fdbNewCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 2 }
fdbNewCfgStaticEntry OBJECT-TYPE
SYNTAX FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbNewCfgEntryIndex }
::= { fdbNewCfgStaticTable 1 }
FdbNewCfgStaticEntry ::= SEQUENCE {
fdbNewCfgEntryIndex Integer32,
fdbNewCfgAddVlan Integer32,
fdbNewCfgAddPort Integer32,
fdbNewCfgAddMac PhysAddress,
fdbNewCfgDelStaticEntry INTEGER
}
fdbNewCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbNewCfgStaticEntry 1 }
fdbNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add vlan for fdb entry index"
::= { fdbNewCfgStaticEntry 2 }
fdbNewCfgAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbNewCfgStaticEntry 3 }
fdbNewCfgAddMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add a fdb entry."
::= { fdbNewCfgStaticEntry 4 }
fdbNewCfgDelStaticEntry OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { fdbNewCfgStaticEntry 5 }
-- 802.1p Information
dot1pInfoPriorityCOSTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1pInfoPriorityCOSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current priority to COS queue information."
::= { dot1pInfo 1 }
dot1pInfoPriorityCOSEntry OBJECT-TYPE
SYNTAX Dot1pInfoPriorityCOSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about 8021p priority to COS queue."
INDEX { dot1pInfoPriorityIndex }
::= { dot1pInfoPriorityCOSTable 1 }
Dot1pInfoPriorityCOSEntry ::= SEQUENCE {
dot1pInfoPriorityIndex INTEGER,
dot1pInfoPriorityCOSQueue INTEGER,
dot1pInfoPriorityCOSWeight INTEGER
}
dot1pInfoPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p priority for which the table is related."
::= { dot1pInfoPriorityCOSEntry 1 }
dot1pInfoPriorityCOSQueue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p priority COSq."
::= { dot1pInfoPriorityCOSEntry 2 }
dot1pInfoPriorityCOSWeight OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p priority weight."
::= { dot1pInfoPriorityCOSEntry 3 }
dot1pInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1pInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021p port priority configuration
in the Current_config."
::= { dot1pInfo 2 }
dot1pInfoPortEntry OBJECT-TYPE
SYNTAX Dot1pInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021p Port Priority"
INDEX { dot1pInfoPortIndex }
::= { dot1pInfoPortTable 1 }
Dot1pInfoPortEntry ::= SEQUENCE {
dot1pInfoPortIndex Integer32,
dot1pInfoPortPriority INTEGER,
dot1pInfoPortCOSq INTEGER,
dot1pInfoPortWeight INTEGER
}
dot1pInfoPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p Port number for which the table is related."
::= { dot1pInfoPortEntry 1 }
dot1pInfoPortPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p Port number for which the table is related."
::= { dot1pInfoPortEntry 2 }
dot1pInfoPortCOSq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p port COSq."
::= { dot1pInfoPortEntry 3 }
dot1pInfoPortWeight OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021p port weight."
::= { dot1pInfoPortEntry 4 }
-- General Information
generalInfoStpUplinkFast OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP uplink fast mode"
::= { genInfo 1 }
generalInfoUplinkFastRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP fast uplink rate."
::= { genInfo 2 }
-- VLAN information
vlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN information."
::= { vlanInfo 1 }
vlanInfoTableEntry OBJECT-TYPE
SYNTAX VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular VLAN."
INDEX { vlanInfoId }
::= { vlanInfoTable 1 }
VlanInfoTableEntry ::= SEQUENCE {
vlanInfoId INTEGER,
vlanInfoName DisplayString,
vlanInfoStatus INTEGER,
vlanInfoPorts OCTET STRING
}
vlanInfoId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanInfoTableEntry 1 }
vlanInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanInfoTableEntry 2 }
vlanInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable, VLAN state information"
::= { vlanInfoTableEntry 3 }
vlanInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanInfoTableEntry 4 }
-- Trunk Group Information
trunkGroupInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group information."
::= { trunkGroupInfo 1 }
trunkGroupInfoTableEntry OBJECT-TYPE
SYNTAX TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in trunk group information table."
INDEX { trunkGroupInfoIndex }
::= { trunkGroupInfoTable 1 }
TrunkGroupInfoTableEntry ::= SEQUENCE {
trunkGroupInfoIndex Integer32,
trunkGroupInfoState INTEGER,
trunkGroupInfoProtocol INTEGER,
trunkGroupInfoPorts OCTET STRING,
trunkGroupInfoStgs OCTET STRING
}
trunkGroupInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupInfoTableEntry 1 }
trunkGroupInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group state."
::= { trunkGroupInfoTableEntry 2 }
trunkGroupInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupInfoTableEntry 3 }
trunkGroupInfoProtocol OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group protocol
Static - static trunk group
Lacp - dynamic trunk group"
::= { trunkGroupInfoTableEntry 4 }
trunkGroupInfoStgs OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The stg list the trunk group is in. The stgs are presented in
bitmap format."
::= { trunkGroupInfoTableEntry 5 }
trunkGroupInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Trunk Group Info."
::= {trunkGroupInfo 2 }
trunkGroupInfoPortTableEntry OBJECT-TYPE
SYNTAX TrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Trunk Info table."
INDEX { trunkGroupInfoPortTrunkId, trunkGroupInfoPortPortId }
::= { trunkGroupInfoPortTable 1 }
TrunkGroupInfoPortTableEntry ::= SEQUENCE {
trunkGroupInfoPortTrunkId Integer32,
trunkGroupInfoPortPortId Integer32,
trunkGroupInfoPortStatus INTEGER
}
trunkGroupInfoPortTrunkId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trunk identifier."
::= { trunkGroupInfoPortTableEntry 1 }
trunkGroupInfoPortPortId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier."
::= { trunkGroupInfoPortTableEntry 2 }
trunkGroupInfoPortStatus OBJECT-TYPE
SYNTAX INTEGER{
down(0),
blocking(1),
forwarding(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { trunkGroupInfoPortTableEntry 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: bt2Physical
-- ----------------------------------------------------------------------------
layer3 OBJECT IDENTIFIER
::= { hpSwitchBladeType4-Mgmt 3 }
-- ----------------------------------------------------------------------------
-- { INSERT: bt2Network
-- ----------------------------------------------------------------------------
layer3Configs OBJECT IDENTIFIER ::= { layer3 1 }
layer3Stats OBJECT IDENTIFIER ::= { layer3 2 }
layer3Info OBJECT IDENTIFIER ::= { layer3 3 }
layer3Oper OBJECT IDENTIFIER ::= { layer3 4 }
ipInterfaceCfg OBJECT IDENTIFIER ::= { layer3Configs 1 }
ipGatewayCfg OBJECT IDENTIFIER ::= { layer3Configs 2 }
ipStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 3 }
ipForwardCfg OBJECT IDENTIFIER ::= { layer3Configs 4 }
vrrpCfg OBJECT IDENTIFIER ::= { layer3Configs 6 }
arpCfg OBJECT IDENTIFIER ::= { layer3Configs 7 }
ipBootpCfg OBJECT IDENTIFIER ::= { layer3Configs 8 }
dnsCfg OBJECT IDENTIFIER ::= { layer3Configs 9 }
ipNwfCfg OBJECT IDENTIFIER ::= { layer3Configs 10 }
ipRmapCfg OBJECT IDENTIFIER ::= { layer3Configs 11 }
ospfCfg OBJECT IDENTIFIER ::= { layer3Configs 13 }
ipGeneralCfg OBJECT IDENTIFIER ::= { layer3Configs 14 }
igmpCfg OBJECT IDENTIFIER ::= { layer3Configs 15 }
rip2Cfg OBJECT IDENTIFIER ::= { layer3Configs 18 }
arpStats OBJECT IDENTIFIER ::= { layer3Stats 2 }
routeStats OBJECT IDENTIFIER ::= { layer3Stats 3 }
vrrpStats OBJECT IDENTIFIER ::= { layer3Stats 4 }
ospfStats OBJECT IDENTIFIER ::= { layer3Stats 5 }
clearStats OBJECT IDENTIFIER ::= { layer3Stats 6 }
igmpStats OBJECT IDENTIFIER ::= { layer3Stats 7 }
ipStats OBJECT IDENTIFIER ::= { layer3Stats 8 }
rip2Stats OBJECT IDENTIFIER ::= { layer3Stats 13 }
dnsStats OBJECT IDENTIFIER ::= { layer3Stats 14 }
geal3Stats OBJECT IDENTIFIER ::= { layer3Stats 15 }
ipRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 1 }
arpInfo OBJECT IDENTIFIER ::= { layer3Info 2 }
vrrpInfo OBJECT IDENTIFIER ::= { layer3Info 3 }
ospfInfo OBJECT IDENTIFIER ::= { layer3Info 4 }
igmpInfo OBJECT IDENTIFIER ::= { layer3Info 5 }
rip2Info OBJECT IDENTIFIER ::= { layer3Info 7 }
ipInfo OBJECT IDENTIFIER ::= { layer3Info 8 }
vrrpOper OBJECT IDENTIFIER ::= { layer3Oper 1 }
-- IP Configuration
ipInterfaceTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP interface table."
::= { ipInterfaceCfg 1 }
ipCurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP interface configuration."
::= { ipInterfaceCfg 2 }
ipCurCfgIntfEntry OBJECT-TYPE
SYNTAX IpCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip interface table"
INDEX { ipCurCfgIntfIndex }
::= { ipCurCfgIntfTable 1 }
IpCurCfgIntfEntry ::= SEQUENCE {
ipCurCfgIntfIndex Integer32,
ipCurCfgIntfAddr IpAddress,
ipCurCfgIntfMask IpAddress,
ipCurCfgIntfBroadcast IpAddress,
ipCurCfgIntfVlan INTEGER,
ipCurCfgIntfState INTEGER,
ipCurCfgIntfBootpRelay INTEGER
}
ipCurCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the IP information is related."
::= { ipCurCfgIntfEntry 1}
ipCurCfgIntfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { ipCurCfgIntfEntry 2 }
ipCurCfgIntfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { ipCurCfgIntfEntry 3 }
ipCurCfgIntfBroadcast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The broadcast address of the interface."
::= { ipCurCfgIntfEntry 4 }
ipCurCfgIntfVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN associated with the interface."
::= { ipCurCfgIntfEntry 5 }
ipCurCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipCurCfgIntfEntry 6 }
ipCurCfgIntfBootpRelay OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable BOOTP relay."
::= { ipCurCfgIntfEntry 7 }
ipNewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of interface configuration in the New Configuration Block."
::= { ipInterfaceCfg 3 }
ipNewCfgIntfEntry OBJECT-TYPE
SYNTAX IpNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip interface table"
INDEX { ipNewCfgIntfIndex }
::= { ipNewCfgIntfTable 1 }
IpNewCfgIntfEntry ::= SEQUENCE {
ipNewCfgIntfIndex Integer32,
ipNewCfgIntfAddr IpAddress,
ipNewCfgIntfMask IpAddress,
ipNewCfgIntfVlan INTEGER,
ipNewCfgIntfState INTEGER,
ipNewCfgIntfDelete INTEGER,
ipNewCfgIntfBootpRelay INTEGER
}
ipNewCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the IP information is related."
::= { ipNewCfgIntfEntry 1 }
ipNewCfgIntfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { ipNewCfgIntfEntry 2 }
ipNewCfgIntfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { ipNewCfgIntfEntry 3 }
ipNewCfgIntfVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN associated with the interface."
::= { ipNewCfgIntfEntry 5 }
ipNewCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipNewCfgIntfEntry 6 }
ipNewCfgIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgIntfEntry 7 }
ipNewCfgIntfBootpRelay OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable BOOTP relay."
::= { ipNewCfgIntfEntry 8 }
-- IP Gateway Table Configuration
ipGatewayTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP gateway table."
::= { ipGatewayCfg 3 }
ipCurCfgGwTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gateways in the Current configuration Block."
::= { ipGatewayCfg 4 }
ipCurCfgGwEntry OBJECT-TYPE
SYNTAX IpCurCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip gateway table"
INDEX { ipCurCfgGwIndex }
::= { ipCurCfgGwTable 1 }
IpCurCfgGwEntry ::= SEQUENCE {
ipCurCfgGwIndex Integer32,
ipCurCfgGwAddr IpAddress,
ipCurCfgGwInterval INTEGER,
ipCurCfgGwRetry INTEGER,
ipCurCfgGwArp INTEGER,
ipCurCfgGwState INTEGER
}
ipCurCfgGwIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { ipCurCfgGwEntry 1}
ipCurCfgGwAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { ipCurCfgGwEntry 2 }
ipCurCfgGwInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between ping attempts."
::= { ipCurCfgGwEntry 3 }
ipCurCfgGwRetry OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed attempts to declare the default gateway DOWN."
::= { ipCurCfgGwEntry 4 }
ipCurCfgGwState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the default gateway."
::= { ipCurCfgGwEntry 5 }
ipCurCfgGwArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of ARP only health checks."
::= { ipCurCfgGwEntry 6 }
ipNewCfgGwTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gateway configuration in the new configuration block."
::= { ipGatewayCfg 5 }
ipNewCfgGwEntry OBJECT-TYPE
SYNTAX IpNewCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip default gateway table"
INDEX { ipNewCfgGwIndex }
::= { ipNewCfgGwTable 1 }
IpNewCfgGwEntry ::= SEQUENCE {
ipNewCfgGwIndex Integer32,
ipNewCfgGwAddr IpAddress,
ipNewCfgGwInterval INTEGER,
ipNewCfgGwRetry INTEGER,
ipNewCfgGwState INTEGER,
ipNewCfgGwArp INTEGER,
ipNewCfgGwDelete INTEGER
}
ipNewCfgGwIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { ipNewCfgGwEntry 1}
ipNewCfgGwAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { ipNewCfgGwEntry 2 }
ipNewCfgGwInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds between ping attempts."
::= { ipNewCfgGwEntry 3 }
ipNewCfgGwRetry OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of failed attempts to declare the default gateway DOWN."
::= { ipNewCfgGwEntry 4 }
ipNewCfgGwState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the default gateway."
::= { ipNewCfgGwEntry 5 }
ipNewCfgGwDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgGwEntry 6 }
ipNewCfgGwArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the ARP only health checks."
::= { ipNewCfgGwEntry 7 }
--
-- IP Static Route Configuration
--
ipStaticRouteTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Static Route table."
::= { ipStaticRouteCfg 1 }
ipCurCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static routes in the current configuration block."
::= { ipStaticRouteCfg 2 }
ipCurCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP route table"
INDEX { ipCurCfgStaticRouteIndx }
::= { ipCurCfgStaticRouteTable 1 }
IpCurCfgStaticRouteEntry ::= SEQUENCE {
ipCurCfgStaticRouteIndx Integer32,
ipCurCfgStaticRouteDestIp IpAddress,
ipCurCfgStaticRouteMask IpAddress,
ipCurCfgStaticRouteGateway IpAddress,
ipCurCfgStaticRouteInterface Integer32
}
ipCurCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static routing table."
::= { ipCurCfgStaticRouteEntry 1}
ipCurCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipCurCfgStaticRouteEntry 2}
ipCurCfgStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipCurCfgStaticRouteEntry 3}
ipCurCfgStaticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipCurCfgStaticRouteEntry 4}
ipCurCfgStaticRouteInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing."
::= { ipCurCfgStaticRouteEntry 5}
ipNewCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static routes in the new configuration block."
::= { ipStaticRouteCfg 3 }
ipStaticRouteClearAllByDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static routes with the specified destination IP address."
::= { ipStaticRouteCfg 4}
ipStaticRouteClearAllByGatewayIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static routes with the specified gateway IP address."
::= { ipStaticRouteCfg 5}
ipStaticRouteClearAllByInterface OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all routes on the specified inteface number."
::= { ipStaticRouteCfg 6}
ipStaticRouteClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2),clears all static routes. Otherwhise nothing is done."
::= { ipStaticRouteCfg 7}
ipNewCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP route table"
INDEX { ipNewCfgStaticRouteIndx }
::= { ipNewCfgStaticRouteTable 1 }
IpNewCfgStaticRouteEntry ::= SEQUENCE {
ipNewCfgStaticRouteIndx Integer32,
ipNewCfgStaticRouteDestIp IpAddress,
ipNewCfgStaticRouteMask IpAddress,
ipNewCfgStaticRouteGateway IpAddress,
ipNewCfgStaticRouteAction INTEGER,
ipNewCfgStaticRouteInterface Integer32
}
ipNewCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static routing table."
::= { ipNewCfgStaticRouteEntry 1}
ipNewCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipNewCfgStaticRouteEntry 2}
ipNewCfgStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of this route."
::= { ipNewCfgStaticRouteEntry 3}
ipNewCfgStaticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the gateway for this route."
::= { ipNewCfgStaticRouteEntry 4}
ipNewCfgStaticRouteAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgStaticRouteEntry 5 }
ipNewCfgStaticRouteInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing."
::= { ipNewCfgStaticRouteEntry 6 }
-- RIP version 2 Configuration
ripCurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of RIP on IP interface configuration in the current_config."
::= { rip2Cfg 1 }
ripCurCfgIntfEntry OBJECT-TYPE
SYNTAX RipCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about RIP on IP interface."
INDEX { ripCurCfgIntfIndex }
::= { ripCurCfgIntfTable 1 }
RipCurCfgIntfEntry ::= SEQUENCE {
ripCurCfgIntfIndex INTEGER,
ripCurCfgIntfVersion INTEGER,
ripCurCfgIntfSupply INTEGER,
ripCurCfgIntfListen INTEGER,
ripCurCfgIntfDefault INTEGER,
ripCurCfgIntfTrigUpdate INTEGER,
ripCurCfgIntfMcastUpdate INTEGER,
ripCurCfgIntfPoisonReverse INTEGER,
ripCurCfgIntfState INTEGER,
ripCurCfgIntfMetric INTEGER,
ripCurCfgIntfAuth INTEGER,
ripCurCfgIntfKey DisplayString,
ripCurCfgIntfSplitHorizon INTEGER
}
ripCurCfgIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the RIP information is related."
::= { ripCurCfgIntfEntry 1}
ripCurCfgIntfVersion OBJECT-TYPE
SYNTAX INTEGER {
ripVersion1(1),
ripVersion2(2),
ripVersionBoth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP version."
::= { ripCurCfgIntfEntry 2 }
ripCurCfgIntfSupply OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable supplying route updates."
::= { ripCurCfgIntfEntry 3 }
ripCurCfgIntfListen OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable listening to route updates."
::= { ripCurCfgIntfEntry 4 }
ripCurCfgIntfDefault OBJECT-TYPE
SYNTAX INTEGER {
both(1),
listen(2),
supply(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies what RIP does with default routes."
::= { ripCurCfgIntfEntry 5 }
ripCurCfgIntfTrigUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tirggered updates."
::= { ripCurCfgIntfEntry 6 }
ripCurCfgIntfMcastUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable multicast updates."
::= { ripCurCfgIntfEntry 7 }
ripCurCfgIntfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP poison reverse."
::= { ripCurCfgIntfEntry 8 }
ripCurCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RIP protocol."
::= { ripCurCfgIntfEntry 9 }
ripCurCfgIntfMetric OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP route metric for this interface."
::= { ripCurCfgIntfEntry 10 }
ripCurCfgIntfAuth OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RIP update authorization with a
simple plain text password."
::= { ripCurCfgIntfEntry 11 }
ripCurCfgIntfKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP update authentication password."
::= { ripCurCfgIntfEntry 12 }
ripCurCfgIntfSplitHorizon OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP split horizon."
::= {ripCurCfgIntfEntry 13 }
ripNewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of RIP on IP interface configuration in the new_config."
::= { rip2Cfg 2 }
ripNewCfgIntfEntry OBJECT-TYPE
SYNTAX RipNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about RIP on IP interface."
INDEX { ripNewCfgIntfIndex }
::= { ripNewCfgIntfTable 1 }
RipNewCfgIntfEntry ::= SEQUENCE {
ripNewCfgIntfIndex INTEGER,
ripNewCfgIntfVersion INTEGER,
ripNewCfgIntfSupply INTEGER,
ripNewCfgIntfListen INTEGER,
ripNewCfgIntfDefault INTEGER,
ripNewCfgIntfTrigUpdate INTEGER,
ripNewCfgIntfMcastUpdate INTEGER,
ripNewCfgIntfPoisonReverse INTEGER,
ripNewCfgIntfState INTEGER,
ripNewCfgIntfMetric INTEGER,
ripNewCfgIntfAuth INTEGER,
ripNewCfgIntfKey DisplayString,
ripNewCfgIntfSplitHorizon INTEGER
}
ripNewCfgIntfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the RIP information is related."
::= { ripNewCfgIntfEntry 1}
ripNewCfgIntfVersion OBJECT-TYPE
SYNTAX INTEGER {
ripVersion1(1),
ripVersion2(2),
ripVersionBoth(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP version."
::= { ripNewCfgIntfEntry 2 }
ripNewCfgIntfSupply OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable supplying route updates."
::= { ripNewCfgIntfEntry 3 }
ripNewCfgIntfListen OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable listening to route updates."
::= { ripNewCfgIntfEntry 4 }
ripNewCfgIntfDefault OBJECT-TYPE
SYNTAX INTEGER {
both(1),
listen(2),
supply(3),
none(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies what RIP does with default routes. The default routes
action could be set to listen/supply/both/none."
::= { ripNewCfgIntfEntry 5 }
ripNewCfgIntfTrigUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable tirggered updates."
::= { ripNewCfgIntfEntry 6 }
ripNewCfgIntfMcastUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable multicast updates."
::= { ripNewCfgIntfEntry 7 }
ripNewCfgIntfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP poison reverse."
::= { ripNewCfgIntfEntry 8 }
ripNewCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable RIP protocol."
::= { ripNewCfgIntfEntry 9 }
ripNewCfgIntfMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP route metric for this interface."
::= { ripNewCfgIntfEntry 10 }
ripNewCfgIntfAuth OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RIP update authorization with a
simple plain text password."
::= { ripNewCfgIntfEntry 11 }
ripNewCfgIntfKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RIP update authentication password."
::= { ripNewCfgIntfEntry 12 }
ripNewCfgIntfSplitHorizon OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP split horizon."
::= { ripNewCfgIntfEntry 13 }
ripGeneral OBJECT IDENTIFIER ::= { rip2Cfg 3 }
rip2CurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP global state."
::= { ripGeneral 1 }
rip2NewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn RIP on or off."
::= { ripGeneral 2 }
rip2CurCfgUpdatePeriod OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Update Period in seconds."
::= { ripGeneral 3 }
rip2NewCfgUpdatePeriod OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Update Period in seconds."
::= { ripGeneral 4 }
ripRouteRedistribution OBJECT IDENTIFIER ::= { rip2Cfg 4 }
ripRedistributeStatic OBJECT IDENTIFIER ::= { ripRouteRedistribution 1 }
ripCurCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned to static routes.
A value of 0 indicates none."
::= { ripRedistributeStatic 1 }
ripNewCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric to be assigned to static routes.
A value of 0 indicates none."
::= { ripRedistributeStatic 2 }
ripCurCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeStatic 5 }
ripNewCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeStatic 6 }
ripNewCfgStaticAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeStatic 7 }
ripNewCfgStaticRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeStatic 8 }
ripRedistributeFixed OBJECT IDENTIFIER ::= { ripRouteRedistribution 4 }
ripCurCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for fixed routes. A value of 0 indicates none"
::= { ripRedistributeFixed 1 }
ripNewCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for fixed routes. A value of 0 indicates none"
::= { ripRedistributeFixed 2 }
ripCurCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeFixed 5 }
ripNewCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeFixed 6 }
ripNewCfgFixedAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeFixed 7 }
ripNewCfgFixedRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeFixed 8 }
ripRedistributeOspf OBJECT IDENTIFIER ::= { ripRouteRedistribution 5 }
ripCurCfgOspfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeOspf 1 }
ripNewCfgOspfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeOspf 2 }
ripCurCfgOspfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeOspf 5 }
ripNewCfgOspfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeOspf 6 }
ripNewCfgOspfAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeOspf 7 }
ripNewCfgOspfRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeOspf 8 }
ripRedistributeEospf OBJECT IDENTIFIER ::= { ripRouteRedistribution 6 }
ripCurCfgEospfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeEospf 1 }
ripNewCfgEospfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeEospf 2 }
ripCurCfgEospfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeEospf 5 }
ripNewCfgEospfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeEospf 6 }
ripNewCfgEospfAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeEospf 7 }
ripNewCfgEospfRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeEospf 8 }
-- IP Forwarding Configuration
ipFwdGeneralCfg OBJECT IDENTIFIER ::= {ipForwardCfg 1 }
ipFwdCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipFwdGeneralCfg 1 }
ipFwdNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipFwdGeneralCfg 2 }
ipFwdCurCfgDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable forwarding directed broadcasts."
::= { ipFwdGeneralCfg 3 }
ipFwdNewCfgDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable forwarding directed broadcasts."
::= { ipFwdGeneralCfg 4 }
--
-- ARP configuration
--
arpCurCfgReARPPeriod OBJECT-TYPE
SYNTAX INTEGER (2..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Re-ARP Period in seconds."
::= { arpCfg 1 }
arpNewCfgReARPPeriod OBJECT-TYPE
SYNTAX INTEGER (2..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Re-ARP Period in seconds."
::= { arpCfg 2 }
--
-- Static ARP Configuration
--
ipStaticArpTableMaxSize OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Static ARP table."
::= { arpCfg 3 }
ipCurCfgStaticArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static ARPs in the current configuration block."
::= { arpCfg 4 }
ipCurCfgStaticArpEntry OBJECT-TYPE
SYNTAX IpCurCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static ARP table"
INDEX { ipCurCfgStaticArpIndx }
::= { ipCurCfgStaticArpTable 1 }
IpCurCfgStaticArpEntry ::= SEQUENCE {
ipCurCfgStaticArpIndx Integer32,
ipCurCfgStaticArpIp IpAddress,
ipCurCfgStaticArpMAC DisplayString,
ipCurCfgStaticArpVlan INTEGER,
ipCurCfgStaticArpPort Integer32
}
ipCurCfgStaticArpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static ARP table."
::= { ipCurCfgStaticArpEntry 1}
ipCurCfgStaticArpIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address for the ARP entry."
::= { ipCurCfgStaticArpEntry 2}
ipCurCfgStaticArpMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { ipCurCfgStaticArpEntry 3 }
ipCurCfgStaticArpVlan OBJECT-TYPE
SYNTAX INTEGER(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN for the ARP entry."
::= { ipCurCfgStaticArpEntry 4}
ipCurCfgStaticArpPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port for the ARP entry."
::= { ipCurCfgStaticArpEntry 5}
ipNewCfgStaticArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static ARPs in the new configuration block."
::= { arpCfg 5 }
ipNewCfgStaticArpEntry OBJECT-TYPE
SYNTAX IpNewCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static ARP table"
INDEX { ipNewCfgStaticArpIndx }
::= { ipNewCfgStaticArpTable 1 }
IpNewCfgStaticArpEntry ::= SEQUENCE {
ipNewCfgStaticArpIndx Integer32,
ipNewCfgStaticArpIp IpAddress,
ipNewCfgStaticArpMAC DisplayString,
ipNewCfgStaticArpVlan INTEGER,
ipNewCfgStaticArpPort Integer32,
ipNewCfgStaticArpAction INTEGER
}
ipNewCfgStaticArpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static ARP table."
::= { ipNewCfgStaticArpEntry 1}
ipNewCfgStaticArpIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address for the ARP entry."
::= { ipNewCfgStaticArpEntry 2}
ipNewCfgStaticArpMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { ipNewCfgStaticArpEntry 3 }
ipNewCfgStaticArpVlan OBJECT-TYPE
SYNTAX INTEGER(1..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN for the ARP entry."
::= { ipNewCfgStaticArpEntry 4}
ipNewCfgStaticArpPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port for the ARP entry."
::= { ipNewCfgStaticArpEntry 5}
ipNewCfgStaticArpAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgStaticArpEntry 6 }
--
-- IP Bootp Configration
--
ipCurCfgBootpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of BOOTP server."
::= { ipBootpCfg 1 }
ipNewCfgBootpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of BOOTP server."
::= { ipBootpCfg 2 }
ipCurCfgBootpAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of second BOOTP server."
::= { ipBootpCfg 3 }
ipNewCfgBootpAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of second BOOTP server."
::= { ipBootpCfg 4 }
ipCurCfgBootpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of BOOTP relay."
::= { ipBootpCfg 5 }
ipNewCfgBootpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of BOOTP relay."
::= { ipBootpCfg 6 }
-- VRRP (Virtual Router Redundantcy Protocol) Group
vrrpGeneral OBJECT IDENTIFIER ::= { vrrpCfg 1 }
vrrpCurCfgGenState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable VRRP operation globally."
::= { vrrpGeneral 1 }
vrrpNewCfgGenState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VRRP operation globally."
::= { vrrpGeneral 2 }
vrrpCurCfgGenTckVirtRtrInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers."
::= { vrrpGeneral 3 }
vrrpNewCfgGenTckVirtRtrInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers."
::= { vrrpGeneral 4 }
vrrpCurCfgGenTckIpIntfInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces."
::= { vrrpGeneral 5 }
vrrpNewCfgGenTckIpIntfInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces."
::= { vrrpGeneral 6 }
vrrpCurCfgGenTckVlanPortInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router."
::= { vrrpGeneral 7 }
vrrpNewCfgGenTckVlanPortInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router."
::= { vrrpGeneral 8 }
vrrpVirtRtrTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in VRRP virtual router table."
::= { vrrpCfg 2 }
vrrpCurCfgVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual routers configuration in current_config."
::= { vrrpCfg 3 }
vrrpCurCfgVirtRtrTableEntry OBJECT-TYPE
SYNTAX VrrpCurCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP virtual router."
INDEX { vrrpCurCfgVirtRtrIndx }
::= { vrrpCurCfgVirtRtrTable 1 }
VrrpCurCfgVirtRtrTableEntry ::= SEQUENCE {
vrrpCurCfgVirtRtrIndx Integer32,
vrrpCurCfgVirtRtrID INTEGER,
vrrpCurCfgVirtRtrAddr IpAddress,
vrrpCurCfgVirtRtrIfIndex Integer32,
vrrpCurCfgVirtRtrInterval INTEGER,
vrrpCurCfgVirtRtrPriority INTEGER,
vrrpCurCfgVirtRtrPreempt INTEGER,
vrrpCurCfgVirtRtrState INTEGER,
vrrpCurCfgVirtRtrTckVirtRtr INTEGER,
vrrpCurCfgVirtRtrTckIpIntf INTEGER,
vrrpCurCfgVirtRtrTckVlanPort INTEGER
}
vrrpCurCfgVirtRtrIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpCurCfgVirtRtrTableEntry 1 }
vrrpCurCfgVirtRtrID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpCurCfgVirtRtrTableEntry 2 }
vrrpCurCfgVirtRtrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router IP address."
::= { vrrpCurCfgVirtRtrTableEntry 3 }
vrrpCurCfgVirtRtrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpCurCfgVirtRtrTableEntry 4 }
vrrpCurCfgVirtRtrInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds."
::= { vrrpCurCfgVirtRtrTableEntry 5 }
vrrpCurCfgVirtRtrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual routers."
::= { vrrpCurCfgVirtRtrTableEntry 6 }
vrrpCurCfgVirtRtrPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpCurCfgVirtRtrTableEntry 7 }
vrrpCurCfgVirtRtrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpCurCfgVirtRtrTableEntry 8 }
vrrpCurCfgVirtRtrTckVirtRtr OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc."
::= { vrrpCurCfgVirtRtrTableEntry 10 }
vrrpCurCfgVirtRtrTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc."
::= { vrrpCurCfgVirtRtrTableEntry 11 }
vrrpCurCfgVirtRtrTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc."
::= { vrrpCurCfgVirtRtrTableEntry 12 }
vrrpNewCfgVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual routers configuration in current_config."
::= { vrrpCfg 4 }
vrrpNewCfgVirtRtrTableEntry OBJECT-TYPE
SYNTAX VrrpNewCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP virtual router."
INDEX { vrrpNewCfgVirtRtrIndx }
::= { vrrpNewCfgVirtRtrTable 1 }
VrrpNewCfgVirtRtrTableEntry ::= SEQUENCE {
vrrpNewCfgVirtRtrIndx Integer32,
vrrpNewCfgVirtRtrID INTEGER,
vrrpNewCfgVirtRtrAddr IpAddress,
vrrpNewCfgVirtRtrIfIndex Integer32,
vrrpNewCfgVirtRtrInterval INTEGER,
vrrpNewCfgVirtRtrPriority INTEGER,
vrrpNewCfgVirtRtrPreempt INTEGER,
vrrpNewCfgVirtRtrState INTEGER,
vrrpNewCfgVirtRtrDelete INTEGER,
vrrpNewCfgVirtRtrTckVirtRtr INTEGER,
vrrpNewCfgVirtRtrTckIpIntf INTEGER,
vrrpNewCfgVirtRtrTckVlanPort INTEGER
}
vrrpNewCfgVirtRtrIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpNewCfgVirtRtrTableEntry 1 }
vrrpNewCfgVirtRtrID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpNewCfgVirtRtrTableEntry 2 }
vrrpNewCfgVirtRtrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VRRP virtual router IP address."
::= { vrrpNewCfgVirtRtrTableEntry 3 }
vrrpNewCfgVirtRtrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpNewCfgVirtRtrTableEntry 4 }
vrrpNewCfgVirtRtrInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds."
::= { vrrpNewCfgVirtRtrTableEntry 5 }
vrrpNewCfgVirtRtrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual router."
::= { vrrpNewCfgVirtRtrTableEntry 6 }
vrrpNewCfgVirtRtrPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpNewCfgVirtRtrTableEntry 7 }
vrrpNewCfgVirtRtrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpNewCfgVirtRtrTableEntry 8 }
vrrpNewCfgVirtRtrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row."
::= { vrrpNewCfgVirtRtrTableEntry 9 }
vrrpNewCfgVirtRtrTckVirtRtr OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc."
::= { vrrpNewCfgVirtRtrTableEntry 11 }
vrrpNewCfgVirtRtrTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc."
::= { vrrpNewCfgVirtRtrTableEntry 12 }
vrrpNewCfgVirtRtrTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc."
::= { vrrpNewCfgVirtRtrTableEntry 13 }
-- VRRP Interface Table
vrrpIfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in VRRP interface table."
::= { vrrpCfg 5 }
vrrpCurCfgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpCurCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP interface configuration in current_config."
::= { vrrpCfg 6 }
vrrpCurCfgIfTableEntry OBJECT-TYPE
SYNTAX VrrpCurCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP interface."
INDEX { vrrpCurCfgIfIndx }
::= { vrrpCurCfgIfTable 1 }
VrrpCurCfgIfTableEntry ::= SEQUENCE {
vrrpCurCfgIfIndx Integer32,
vrrpCurCfgIfAuthType INTEGER,
vrrpCurCfgIfPasswd DisplayString
}
vrrpCurCfgIfIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP interface index. This is eqivalent to IfIndex."
::= { vrrpCurCfgIfTableEntry 1 }
vrrpCurCfgIfAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
simple-text-password(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication."
::= { vrrpCurCfgIfTableEntry 2 }
vrrpCurCfgIfPasswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The password for authentication."
::= { vrrpCurCfgIfTableEntry 3 }
vrrpNewCfgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpNewCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP interface configuration in current_config."
::= { vrrpCfg 7 }
vrrpNewCfgIfTableEntry OBJECT-TYPE
SYNTAX VrrpNewCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP interface."
INDEX { vrrpNewCfgIfIndx }
::= { vrrpNewCfgIfTable 1 }
VrrpNewCfgIfTableEntry ::= SEQUENCE {
vrrpNewCfgIfIndx Integer32,
vrrpNewCfgIfAuthType INTEGER,
vrrpNewCfgIfPasswd DisplayString,
vrrpNewCfgIfDelete INTEGER
}
vrrpNewCfgIfIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP interface index. This is eqivalent to IfIndex."
::= { vrrpNewCfgIfTableEntry 1 }
vrrpNewCfgIfAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
simple-text-password(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication."
::= { vrrpNewCfgIfTableEntry 2 }
vrrpNewCfgIfPasswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password for authentication."
::= { vrrpNewCfgIfTableEntry 3 }
vrrpNewCfgIfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row."
::= { vrrpNewCfgIfTableEntry 4 }
-- Failover Virtual Router Groups
vrrpVirtRtrGrpTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in VRRP Group table."
::= { vrrpCfg 8 }
vrrpCurCfgVirtRtrGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual router group in current_config."
::= { vrrpCfg 9 }
vrrpCurCfgVirtRtrGrpTableEntry OBJECT-TYPE
SYNTAX VrrpCurCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP failover virtual router."
INDEX { vrrpCurCfgVirtRtrGrpIndx }
::= { vrrpCurCfgVirtRtrGrpTable 1 }
VrrpCurCfgVirtRtrGrpTableEntry ::= SEQUENCE {
vrrpCurCfgVirtRtrGrpIndx Integer32,
vrrpCurCfgVirtRtrGrpID INTEGER,
vrrpCurCfgVirtRtrGrpIfIndex Integer32,
vrrpCurCfgVirtRtrGrpInterval INTEGER,
vrrpCurCfgVirtRtrGrpPriority INTEGER,
vrrpCurCfgVirtRtrGrpPreempt INTEGER,
vrrpCurCfgVirtRtrGrpState INTEGER,
vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER,
vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER
}
vrrpCurCfgVirtRtrGrpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpCurCfgVirtRtrGrpTableEntry 1 }
vrrpCurCfgVirtRtrGrpID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpCurCfgVirtRtrGrpTableEntry 2 }
vrrpCurCfgVirtRtrGrpIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpCurCfgVirtRtrGrpTableEntry 3 }
vrrpCurCfgVirtRtrGrpInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds."
::= { vrrpCurCfgVirtRtrGrpTableEntry 4 }
vrrpCurCfgVirtRtrGrpPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual routers."
::= { vrrpCurCfgVirtRtrGrpTableEntry 5 }
vrrpCurCfgVirtRtrGrpPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpCurCfgVirtRtrGrpTableEntry 6 }
vrrpCurCfgVirtRtrGrpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpCurCfgVirtRtrGrpTableEntry 7 }
vrrpCurCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpCurCfgGenTckIpIntfInc."
::= { vrrpCurCfgVirtRtrGrpTableEntry 10 }
vrrpCurCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpCurCfgGenTckVlanPortInc."
::= { vrrpCurCfgVirtRtrGrpTableEntry 11 }
vrrpNewCfgVirtRtrGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual router group configuration in new_config."
::= { vrrpCfg 10 }
vrrpNewCfgVirtRtrGrpTableEntry OBJECT-TYPE
SYNTAX VrrpNewCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP failover virtual router."
INDEX { vrrpNewCfgVirtRtrGrpIndx }
::= { vrrpNewCfgVirtRtrGrpTable 1 }
VrrpNewCfgVirtRtrGrpTableEntry ::= SEQUENCE {
vrrpNewCfgVirtRtrGrpIndx Integer32,
vrrpNewCfgVirtRtrGrpID INTEGER,
vrrpNewCfgVirtRtrGrpIfIndex Integer32,
vrrpNewCfgVirtRtrGrpInterval INTEGER,
vrrpNewCfgVirtRtrGrpPriority INTEGER,
vrrpNewCfgVirtRtrGrpPreempt INTEGER,
vrrpNewCfgVirtRtrGrpState INTEGER,
vrrpNewCfgVirtRtrGrpDelete INTEGER,
vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER,
vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER
}
vrrpNewCfgVirtRtrGrpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpNewCfgVirtRtrGrpTableEntry 1 }
vrrpNewCfgVirtRtrGrpID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpNewCfgVirtRtrGrpTableEntry 2 }
vrrpNewCfgVirtRtrGrpIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpNewCfgVirtRtrGrpTableEntry 3 }
vrrpNewCfgVirtRtrGrpInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds."
::= { vrrpNewCfgVirtRtrGrpTableEntry 4 }
vrrpNewCfgVirtRtrGrpPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual router."
::= { vrrpNewCfgVirtRtrGrpTableEntry 5 }
vrrpNewCfgVirtRtrGrpPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpNewCfgVirtRtrGrpTableEntry 6 }
vrrpNewCfgVirtRtrGrpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpNewCfgVirtRtrGrpTableEntry 7 }
vrrpNewCfgVirtRtrGrpDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row."
::= { vrrpNewCfgVirtRtrGrpTableEntry 8 }
vrrpNewCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc."
::= { vrrpNewCfgVirtRtrGrpTableEntry 11 }
vrrpNewCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc."
::= { vrrpNewCfgVirtRtrGrpTableEntry 12 }
-- Domain Name Server Configuration
dnsCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS primary IP address in the current_configuration block."
::= { dnsCfg 1 }
dnsNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS primary IP address in the new_configuration block."
::= { dnsCfg 2 }
dnsCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS primary IP address in the current_configuration block."
::= { dnsCfg 3 }
dnsNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS primary IP address in the new_configuration block."
::= { dnsCfg 4 }
dnsCurCfgDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..191))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS doamin name in the current_configuration block."
::= { dnsCfg 5 }
dnsNewCfgDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..191))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS doamin name in the new_configuration block."
::= { dnsCfg 6 }
--
-- IP network filter configuration
--
ipNwfTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP network filter table."
::= { ipNwfCfg 1 }
ipCurCfgNwfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP network filter configuration in the current_config."
::= { ipNwfCfg 2 }
ipCurCfgNwfEntry OBJECT-TYPE
SYNTAX IpCurCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP network filter."
INDEX { ipCurCfgNwfIndex }
::= { ipCurCfgNwfTable 1 }
IpCurCfgNwfEntry ::= SEQUENCE {
ipCurCfgNwfIndex Integer32,
ipCurCfgNwfAddr IpAddress,
ipCurCfgNwfMask IpAddress,
ipCurCfgNwfState INTEGER
}
ipCurCfgNwfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netowrk filter number for which the NWF is related."
::= { ipCurCfgNwfEntry 1}
ipCurCfgNwfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the network filter."
::= { ipCurCfgNwfEntry 2 }
ipCurCfgNwfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the network filter."
::= { ipCurCfgNwfEntry 3 }
ipCurCfgNwfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the network filter."
::= { ipCurCfgNwfEntry 4 }
ipNewCfgNwfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP network filter configuration in the current_config."
::= { ipNwfCfg 3 }
ipNewCfgNwfEntry OBJECT-TYPE
SYNTAX IpNewCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP network filter."
INDEX { ipNewCfgNwfIndex }
::= { ipNewCfgNwfTable 1 }
IpNewCfgNwfEntry ::= SEQUENCE {
ipNewCfgNwfIndex Integer32,
ipNewCfgNwfAddr IpAddress,
ipNewCfgNwfMask IpAddress,
ipNewCfgNwfState INTEGER,
ipNewCfgNwfDelete INTEGER
}
ipNewCfgNwfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netowrk filter number for which the NWF is related."
::= { ipNewCfgNwfEntry 1}
ipNewCfgNwfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the network filter."
::= { ipNewCfgNwfEntry 2 }
ipNewCfgNwfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of the network filter."
::= { ipNewCfgNwfEntry 3 }
ipNewCfgNwfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the network filter."
::= { ipNewCfgNwfEntry 4 }
ipNewCfgNwfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgNwfEntry 5 }
--
-- IP route map configuration
--
ipRmapTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP route map table."
::= { ipRmapCfg 1 }
ipCurCfgRmapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map configuration in the current_config."
::= { ipRmapCfg 2 }
ipCurCfgRmapEntry OBJECT-TYPE
SYNTAX IpCurCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipCurCfgRmapIndex }
::= { ipCurCfgRmapTable 1 }
IpCurCfgRmapEntry ::= SEQUENCE {
ipCurCfgRmapIndex Integer32,
ipCurCfgRmapMetric Unsigned32,
ipCurCfgRmapPrec INTEGER,
ipCurCfgRmapState INTEGER,
ipCurCfgRmapMetricType INTEGER,
ipCurCfgRmapState INTEGER
}
ipCurCfgRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipCurCfgRmapEntry 1}
ipCurCfgRmapMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of the route map. 4294967295 means none"
::= { ipCurCfgRmapEntry 3 }
ipCurCfgRmapPrec OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The precedence of the route map."
::= { ipCurCfgRmapEntry 4 }
ipCurCfgRmapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the route map."
::= { ipCurCfgRmapEntry 6 }
ipCurCfgRmapMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF metric-type of the matched route."
::= { ipCurCfgRmapEntry 8 }
ipNewCfgRmapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map configuration in the current_config."
::= { ipRmapCfg 3 }
ipNewCfgRmapEntry OBJECT-TYPE
SYNTAX IpNewCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipNewCfgRmapIndex }
::= { ipNewCfgRmapTable 1 }
IpNewCfgRmapEntry ::= SEQUENCE {
ipNewCfgRmapIndex Integer32,
ipNewCfgRmapMetric Unsigned32,
ipNewCfgRmapPrec INTEGER,
ipNewCfgRmapState INTEGER,
ipNewCfgRmapMetricType INTEGER,
ipNewCfgRmapDelete INTEGER
}
ipNewCfgRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipNewCfgRmapEntry 1}
ipNewCfgRmapMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric of the route map. 16777215 means none"
::= { ipNewCfgRmapEntry 3 }
ipNewCfgRmapPrec OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The precedence of the route map."
::= { ipNewCfgRmapEntry 4 }
ipNewCfgRmapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the route map."
::= { ipNewCfgRmapEntry 6 }
ipNewCfgRmapMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPF metric-type of the matched route."
::= { ipNewCfgRmapEntry 8 }
ipNewCfgRmapDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgRmapEntry 9 }
ipAlistTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP route map table."
::= { ipRmapCfg 4 }
ipCurCfgAlistTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map access list configuration in the
current_config."
::= { ipRmapCfg 5 }
ipCurCfgAlistEntry OBJECT-TYPE
SYNTAX IpCurCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipCurCfgAlistRmapIndex, ipCurCfgAlistIndex }
::= { ipCurCfgAlistTable 1 }
IpCurCfgAlistEntry ::= SEQUENCE {
ipCurCfgAlistRmapIndex Integer32,
ipCurCfgAlistIndex Integer32,
ipCurCfgAlistNwf INTEGER,
ipCurCfgAlistMetric Unsigned32,
ipCurCfgAlistAction INTEGER,
ipCurCfgAlistState INTEGER
}
ipCurCfgAlistRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipCurCfgAlistEntry 1 }
ipCurCfgAlistIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access list number for which the access list is related."
::= { ipCurCfgAlistEntry 2 }
ipCurCfgAlistNwf OBJECT-TYPE
SYNTAX INTEGER (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network filter number of the route map access list.
0 means none"
::= { ipCurCfgAlistEntry 3 }
ipCurCfgAlistMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of the route map access list. 4294967295 means none"
::= { ipCurCfgAlistEntry 4 }
ipCurCfgAlistAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action of the route map access list."
::= { ipCurCfgAlistEntry 5 }
ipCurCfgAlistState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the route map access list."
::= { ipCurCfgAlistEntry 6 }
ipNewCfgAlistTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map access list configuration in the
current_config."
::= { ipRmapCfg 6 }
ipNewCfgAlistEntry OBJECT-TYPE
SYNTAX IpNewCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipNewCfgAlistRmapIndex, ipNewCfgAlistIndex }
::= { ipNewCfgAlistTable 1 }
IpNewCfgAlistEntry ::= SEQUENCE {
ipNewCfgAlistRmapIndex Integer32,
ipNewCfgAlistIndex Integer32,
ipNewCfgAlistNwf INTEGER,
ipNewCfgAlistMetric Unsigned32,
ipNewCfgAlistAction INTEGER,
ipNewCfgAlistState INTEGER,
ipNewCfgAlistDelete INTEGER
}
ipNewCfgAlistRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipNewCfgAlistEntry 1 }
ipNewCfgAlistIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access list number for which the access list is related."
::= { ipNewCfgAlistEntry 2 }
ipNewCfgAlistNwf OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The network filter number of the route map access list.
0 means none"
::= { ipNewCfgAlistEntry 3 }
ipNewCfgAlistMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric of the route map access list. 16777215 means none"
::= { ipNewCfgAlistEntry 4 }
ipNewCfgAlistAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action of the route map access list."
::= { ipNewCfgAlistEntry 5 }
ipNewCfgAlistState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the route map access list."
::= { ipNewCfgAlistEntry 6 }
ipNewCfgAlistDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgAlistEntry 7 }
--
-- IP OSPF configuration
--
ospfGeneral OBJECT IDENTIFIER ::= { ospfCfg 1 }
ospfCurCfgDefaultRouteMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the metric to be assigned."
::= { ospfGeneral 1 }
ospfNewCfgDefaultRouteMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the metric to be assigned."
::= { ospfGeneral 2 }
ospfCurCfgDefaultRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the AS External metric type to be assigned."
::= { ospfGeneral 3 }
ospfNewCfgDefaultRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the AS External metric type to be assigned."
::= { ospfGeneral 4 }
ospfIntfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Interface table."
::= { ospfGeneral 5 }
ospfAreaTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Area table."
::= { ospfGeneral 6 }
ospfRangeTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Range table."
::= { ospfGeneral 7 }
ospfVirtIntfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Virtual Interface
table."
::= { ospfGeneral 8 }
ospfHostTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Host table."
::= { ospfGeneral 9 }
ospfCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF global state."
::= { ospfGeneral 10 }
ospfNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn OSPF on or off."
::= { ospfGeneral 11 }
ospfCurCfgLSDB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSDB limit for external LSA."
::= { ospfGeneral 12 }
ospfNewCfgLSDB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LSDB limit for external LSA."
::= { ospfGeneral 13 }
ospfCurCfgAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area configuration in the current_config."
::= { ospfCfg 2 }
ospfCurCfgAreaEntry OBJECT-TYPE
SYNTAX OspfCurCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF area."
INDEX { ospfCurCfgAreaIndex }
::= { ospfCurCfgAreaTable 1 }
OspfCurCfgAreaEntry ::= SEQUENCE {
ospfCurCfgAreaIndex Integer32,
ospfCurCfgAreaId IpAddress,
ospfCurCfgAreaSpfInterval INTEGER,
ospfCurCfgAreaAuthType INTEGER,
ospfCurCfgAreaType INTEGER,
ospfCurCfgAreaMetric INTEGER,
ospfCurCfgAreaStatus INTEGER
}
ospfCurCfgAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF area number for which the OSPF area table is related."
::= { ospfCurCfgAreaEntry 1}
ospfCurCfgAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF area."
::= { ospfCurCfgAreaEntry 2 }
ospfCurCfgAreaSpfInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF interval for the OSPF area."
::= { ospfCurCfgAreaEntry 3 }
ospfCurCfgAreaAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication."
::= { ospfCurCfgAreaEntry 4 }
ospfCurCfgAreaType OBJECT-TYPE
SYNTAX INTEGER {
transit(0),
stub(1),
nssa(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Area.
transit(0)
stub(1)
nssa(2)"
::= { ospfCurCfgAreaEntry 5 }
ospfCurCfgAreaMetric OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Metric (1-65535)"
::= { ospfCurCfgAreaEntry 6 }
ospfCurCfgAreaStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospfCurCfgAreaEntry 7 }
ospfNewCfgAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area configuration in the new_config."
::= { ospfCfg 3 }
ospfNewCfgAreaEntry OBJECT-TYPE
SYNTAX OspfNewCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF area."
INDEX { ospfNewCfgAreaIndex }
::= { ospfNewCfgAreaTable 1 }
OspfNewCfgAreaEntry ::= SEQUENCE {
ospfNewCfgAreaIndex Integer32,
ospfNewCfgAreaId IpAddress,
ospfNewCfgAreaSpfInterval INTEGER,
ospfNewCfgAreaAuthType INTEGER,
ospfNewCfgAreaType INTEGER,
ospfNewCfgAreaMetric INTEGER,
ospfNewCfgAreaStatus INTEGER,
ospfNewCfgAreaDelete INTEGER
}
ospfNewCfgAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF area number for which the OSPF area table is related."
::= { ospfNewCfgAreaEntry 1}
ospfNewCfgAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPF area."
::= { ospfNewCfgAreaEntry 2 }
ospfNewCfgAreaSpfInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SPF interval for the OSPF area."
::= { ospfNewCfgAreaEntry 3 }
ospfNewCfgAreaAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
password(2) - use password.
md5(3) - use MD5 authentication."
::= { ospfNewCfgAreaEntry 4 }
ospfNewCfgAreaType OBJECT-TYPE
SYNTAX INTEGER {
transit(0),
stub(1),
nssa(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of Area.
transit(0)
stub(1)
nssa(2)"
::= { ospfNewCfgAreaEntry 5 }
ospfNewCfgAreaMetric OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Metric (1-65535)"
::= { ospfNewCfgAreaEntry 6 }
ospfNewCfgAreaStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospfNewCfgAreaEntry 7 }
ospfNewCfgAreaDelete OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the area
no(0),
yes(1)"
::= { ospfNewCfgAreaEntry 8 }
-- OSPF Host Table
ospfCurCfgHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Host configuration."
::= { ospfCfg 12 }
ospfCurCfgHostEntry OBJECT-TYPE
SYNTAX OspfCurCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF host."
INDEX { ospfCurCfgHostIndex }
::= { ospfCurCfgHostTable 1 }
OspfCurCfgHostEntry ::= SEQUENCE {
ospfCurCfgHostIndex Integer32,
ospfCurCfgHostIpAddr IpAddress,
ospfCurCfgHostAreaIndex Integer32,
ospfCurCfgHostCost INTEGER,
ospfCurCfgHostState INTEGER
}
ospfCurCfgHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF host number for which the OSPF host table is related."
::= { ospfCurCfgHostEntry 1}
ospfCurCfgHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF host."
::= { ospfCurCfgHostEntry 2 }
ospfCurCfgHostAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ospfCurCfgHostEntry 3 }
ospfCurCfgHostCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the OSPF host."
::= { ospfCurCfgHostEntry 4 }
ospfCurCfgHostState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable an OSPF Host"
::= { ospfCurCfgHostEntry 5 }
ospfNewCfgHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Host configuration."
::= { ospfCfg 13 }
ospfNewCfgHostEntry OBJECT-TYPE
SYNTAX OspfNewCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF host."
INDEX { ospfNewCfgHostIndex }
::= { ospfNewCfgHostTable 1 }
OspfNewCfgHostEntry ::= SEQUENCE {
ospfNewCfgHostIndex Integer32,
ospfNewCfgHostIpAddr IpAddress,
ospfNewCfgHostAreaIndex Integer32,
ospfNewCfgHostCost INTEGER,
ospfNewCfgHostState INTEGER,
ospfNewCfgHostDelete INTEGER
}
ospfNewCfgHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF host number for which the OSPF host table is related."
::= { ospfNewCfgHostEntry 1}
ospfNewCfgHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPF host."
::= { ospfNewCfgHostEntry 2 }
ospfNewCfgHostAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPF area index."
::= { ospfNewCfgHostEntry 3 }
ospfNewCfgHostCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The cost of the OSPF host."
::= { ospfNewCfgHostEntry 4 }
ospfNewCfgHostState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable an OSPF Host"
::= { ospfNewCfgHostEntry 5 }
ospfNewCfgHostDelete OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the OSPF host:
no(0),
yes(1)"
::= { ospfNewCfgHostEntry 6 }
ospfMdkeyTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Mdkey table."
::= { ospfCfg 11 }
ospfCurCfgMdkeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF MD5 keys in the current_config."
::= { ospfCfg 5 }
ospfCurCfgMdkeyEntry OBJECT-TYPE
SYNTAX OspfCurCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF MD keys table."
INDEX { ospfCurCfgMdkeyIndex }
::= { ospfCurCfgMdkeyTable 1 }
OspfCurCfgMdkeyEntry ::= SEQUENCE {
ospfCurCfgMdkeyIndex Integer32,
ospfCurCfgMdkeyKey DisplayString
}
ospfCurCfgMdkeyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF MD5 Key number for which the OSPF MdKey table is related."
::= { ospfCurCfgMdkeyEntry 1}
ospfCurCfgMdkeyKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The character string representing the MD5 Key."
::= { ospfCurCfgMdkeyEntry 2 }
ospfNewCfgMdkeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF MD5 keys in the new_config."
::= { ospfCfg 6 }
ospfNewCfgMdkeyEntry OBJECT-TYPE
SYNTAX OspfNewCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF MD keys table."
INDEX { ospfNewCfgMdkeyIndex }
::= { ospfNewCfgMdkeyTable 1 }
OspfNewCfgMdkeyEntry ::= SEQUENCE {
ospfNewCfgMdkeyIndex Integer32,
ospfNewCfgMdkeyKey DisplayString,
ospfNewCfgMdkeyDelete INTEGER
}
ospfNewCfgMdkeyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF MD5 Key number for which the OSPF MdKey table is related."
::= { ospfNewCfgMdkeyEntry 1}
ospfNewCfgMdkeyKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The character string representing the MD5 Key."
::= { ospfNewCfgMdkeyEntry 2 }
ospfNewCfgMdkeyDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ospfNewCfgMdkeyEntry 3}
ospfCurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface configuration in the current_config."
::= { ospfCfg 7 }
ospfCurCfgIntfEntry OBJECT-TYPE
SYNTAX OspfCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF Interface."
INDEX { ospfCurCfgIntfIndex }
::= { ospfCurCfgIntfTable 1 }
OspfCurCfgIntfEntry ::= SEQUENCE {
ospfCurCfgIntfIndex Integer32,
ospfCurCfgIntfId IpAddress,
ospfCurCfgIntfArea INTEGER,
ospfCurCfgIntfMdkey INTEGER,
ospfCurCfgIntfCost INTEGER,
ospfCurCfgIntfPrio INTEGER,
ospfCurCfgIntfHello INTEGER,
ospfCurCfgIntfDead INTEGER,
ospfCurCfgIntfTrans INTEGER,
ospfCurCfgIntfRetra INTEGER,
ospfCurCfgIntfAuthKey DisplayString,
ospfCurCfgIntfStatus INTEGER
}
ospfCurCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface number for which the OSPF Interface table is related."
::= { ospfCurCfgIntfEntry 1}
ospfCurCfgIntfId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF interface."
::= { ospfCurCfgIntfEntry 2 }
ospfCurCfgIntfArea OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the interface belongs"
::= { ospfCurCfgIntfEntry 3 }
ospfCurCfgIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 key for the OSPF interface
0 (none) no MD5 authentication."
::= { ospfCurCfgIntfEntry 4 }
ospfCurCfgIntfCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface cost"
::= { ospfCurCfgIntfEntry 5 }
ospfCurCfgIntfPrio OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ospfCurCfgIntfEntry 6 }
ospfCurCfgIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ospfCurCfgIntfEntry 7 }
ospfCurCfgIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ospfCurCfgIntfEntry 8 }
ospfCurCfgIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transit delay"
::= { ospfCurCfgIntfEntry 9 }
ospfCurCfgIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ospfCurCfgIntfEntry 10 }
ospfCurCfgIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key"
::= { ospfCurCfgIntfEntry 11 }
ospfCurCfgIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the interface
disabled(0),
enabled(1)"
::= { ospfCurCfgIntfEntry 12 }
ospfNewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface configuration in the new_config."
::= { ospfCfg 8 }
ospfNewCfgIntfEntry OBJECT-TYPE
SYNTAX OspfNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF Interface."
INDEX { ospfNewCfgIntfIndex }
::= { ospfNewCfgIntfTable 1 }
OspfNewCfgIntfEntry ::= SEQUENCE {
ospfNewCfgIntfIndex Integer32,
ospfNewCfgIntfId IpAddress,
ospfNewCfgIntfArea INTEGER,
ospfNewCfgIntfMdkey INTEGER,
ospfNewCfgIntfCost INTEGER,
ospfNewCfgIntfPrio INTEGER,
ospfNewCfgIntfHello INTEGER,
ospfNewCfgIntfDead INTEGER,
ospfNewCfgIntfTrans INTEGER,
ospfNewCfgIntfRetra INTEGER,
ospfNewCfgIntfAuthKey DisplayString,
ospfNewCfgIntfStatus INTEGER,
ospfNewCfgIntfDelete INTEGER
}
ospfNewCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface number for which the OSPF Interface table is related."
::= { ospfNewCfgIntfEntry 1}
ospfNewCfgIntfId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF interface."
::= { ospfNewCfgIntfEntry 2 }
ospfNewCfgIntfArea OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the area that the interface belongs (0..2)"
::= { ospfNewCfgIntfEntry 3 }
ospfNewCfgIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MD5 key for the OSPF interface
0 (none) no MD5 authentication."
::= { ospfNewCfgIntfEntry 4 }
ospfNewCfgIntfCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface cost(1..65535)"
::= { ospfNewCfgIntfEntry 5 }
ospfNewCfgIntfPrio OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface router priority(0..255)"
::= { ospfNewCfgIntfEntry 6 }
ospfNewCfgIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hello interval(1..65535)"
::= { ospfNewCfgIntfEntry 7 }
ospfNewCfgIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dead interval(1..65535)"
::= { ospfNewCfgIntfEntry 8 }
ospfNewCfgIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Transit delay(1..3600)"
::= { ospfNewCfgIntfEntry 9 }
ospfNewCfgIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmit interval(1..3600)"
::= { ospfNewCfgIntfEntry 10 }
ospfNewCfgIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authentication Key"
::= { ospfNewCfgIntfEntry 11 }
ospfNewCfgIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the interface
disabled(0),
enabled(1)"
::= { ospfNewCfgIntfEntry 12 }
ospfNewCfgIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the interface
other(0),
delete(1)"
::= { ospfNewCfgIntfEntry 13 }
ospfCurCfgVirtIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Virtual Interface configuration in the current_config."
::= { ospfCfg 9 }
ospfCurCfgVirtIntfEntry OBJECT-TYPE
SYNTAX OspfCurCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF virtual Interface."
INDEX { ospfCurCfgVirtIntfIndex }
::= { ospfCurCfgVirtIntfTable 1 }
OspfCurCfgVirtIntfEntry ::= SEQUENCE {
ospfCurCfgVirtIntfIndex Integer32,
ospfCurCfgVirtIntfAreaId INTEGER,
ospfCurCfgVirtIntfNbr IpAddress,
ospfCurCfgVirtIntfMdkey INTEGER,
ospfCurCfgVirtIntfHello INTEGER,
ospfCurCfgVirtIntfDead INTEGER,
ospfCurCfgVirtIntfTrans INTEGER,
ospfCurCfgVirtIntfRetra INTEGER,
ospfCurCfgVirtIntfAuthKey DisplayString,
ospfCurCfgVirtIntfStatus INTEGER
}
ospfCurCfgVirtIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related."
::= { ospfCurCfgVirtIntfEntry 1}
ospfCurCfgVirtIntfAreaId OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF area to which this virtual interface
belongs."
::= { ospfCurCfgVirtIntfEntry 2 }
ospfCurCfgVirtIntfNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF neighbor for this virtual interface."
::= { ospfCurCfgVirtIntfEntry 3 }
ospfCurCfgVirtIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication."
::= { ospfCurCfgVirtIntfEntry 4 }
ospfCurCfgVirtIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ospfCurCfgVirtIntfEntry 5 }
ospfCurCfgVirtIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ospfCurCfgVirtIntfEntry 6 }
ospfCurCfgVirtIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transit delay"
::= { ospfCurCfgVirtIntfEntry 7 }
ospfCurCfgVirtIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ospfCurCfgVirtIntfEntry 8 }
ospfCurCfgVirtIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key"
::= { ospfCurCfgVirtIntfEntry 9 }
ospfCurCfgVirtIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1)"
::= { ospfCurCfgVirtIntfEntry 10 }
ospfNewCfgVirtIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Virtual Interface configuration in the new_config."
::= { ospfCfg 10 }
ospfNewCfgVirtIntfEntry OBJECT-TYPE
SYNTAX OspfNewCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF virtual Interface."
INDEX { ospfNewCfgVirtIntfIndex }
::= { ospfNewCfgVirtIntfTable 1 }
OspfNewCfgVirtIntfEntry ::= SEQUENCE {
ospfNewCfgVirtIntfIndex Integer32,
ospfNewCfgVirtIntfAreaId INTEGER,
ospfNewCfgVirtIntfNbr IpAddress,
ospfNewCfgVirtIntfMdkey INTEGER,
ospfNewCfgVirtIntfHello INTEGER,
ospfNewCfgVirtIntfDead INTEGER,
ospfNewCfgVirtIntfTrans INTEGER,
ospfNewCfgVirtIntfRetra INTEGER,
ospfNewCfgVirtIntfAuthKey DisplayString,
ospfNewCfgVirtIntfStatus INTEGER,
ospfNewCfgVirtIntfDelete INTEGER
}
ospfNewCfgVirtIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related."
::= { ospfNewCfgVirtIntfEntry 1}
ospfNewCfgVirtIntfAreaId OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the OSPF area to which this virtual interface
belongs."
::= { ospfNewCfgVirtIntfEntry 2 }
ospfNewCfgVirtIntfNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPF neighbor for this virtual interface."
::= { ospfNewCfgVirtIntfEntry 3 }
ospfNewCfgVirtIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication."
::= { ospfNewCfgVirtIntfEntry 4 }
ospfNewCfgVirtIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hello interval(1..65535)"
::= { ospfNewCfgVirtIntfEntry 5 }
ospfNewCfgVirtIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dead interval(1..65535)"
::= { ospfNewCfgVirtIntfEntry 6 }
ospfNewCfgVirtIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Transit dela(1..3600)y"
::= { ospfNewCfgVirtIntfEntry 7 }
ospfNewCfgVirtIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmit interval(1..3600)"
::= { ospfNewCfgVirtIntfEntry 8 }
ospfNewCfgVirtIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authentication Key SIZE(0..8)"
::= { ospfNewCfgVirtIntfEntry 9 }
ospfNewCfgVirtIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1) "
::= { ospfNewCfgVirtIntfEntry 10 }
ospfNewCfgVirtIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete
other(0),
delete(1)"
::= { ospfNewCfgVirtIntfEntry 11 }
-- ospf range
ospfCurCfgRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF summary range in the current configuration."
::= { ospfCfg 14 }
ospfCurCfgRangeEntry OBJECT-TYPE
SYNTAX OspfCurCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF summary range."
INDEX { ospfCurCfgRangeIndex }
::= { ospfCurCfgRangeTable 1 }
OspfCurCfgRangeEntry ::= SEQUENCE {
ospfCurCfgRangeIndex Integer32,
ospfCurCfgRangeAddr IpAddress,
ospfCurCfgRangeMask IpAddress,
ospfCurCfgRangeAreaIndex Integer32,
ospfCurCfgRangeHideState INTEGER,
ospfCurCfgRangeState INTEGER
}
ospfCurCfgRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPF summary range table is related."
::= { ospfCurCfgRangeEntry 1}
ospfCurCfgRangeAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the range."
::= { ospfCurCfgRangeEntry 2 }
ospfCurCfgRangeMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask of the range."
::= { ospfCurCfgRangeEntry 3 }
ospfCurCfgRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ospfCurCfgRangeEntry 4 }
ospfCurCfgRangeHideState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the hide range."
::= { ospfCurCfgRangeEntry 5 }
ospfCurCfgRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the range."
::= { ospfCurCfgRangeEntry 6 }
ospfNewCfgRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF summary range in the new configuration."
::= { ospfCfg 15 }
ospfNewCfgRangeEntry OBJECT-TYPE
SYNTAX OspfNewCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF summary range."
INDEX { ospfNewCfgRangeIndex }
::= { ospfNewCfgRangeTable 1 }
OspfNewCfgRangeEntry ::= SEQUENCE {
ospfNewCfgRangeIndex Integer32,
ospfNewCfgRangeAddr IpAddress,
ospfNewCfgRangeMask IpAddress,
ospfNewCfgRangeAreaIndex Integer32,
ospfNewCfgRangeHideState INTEGER,
ospfNewCfgRangeState INTEGER,
ospfNewCfgRangeDelete INTEGER
}
ospfNewCfgRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPF summary range table is related."
::= { ospfNewCfgRangeEntry 1}
ospfNewCfgRangeAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the range."
::= { ospfNewCfgRangeEntry 2 }
ospfNewCfgRangeMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask of the range."
::= { ospfNewCfgRangeEntry 3 }
ospfNewCfgRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The area index."
::= { ospfNewCfgRangeEntry 4 }
ospfNewCfgRangeHideState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the hide range."
::= { ospfNewCfgRangeEntry 5 }
ospfNewCfgRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the range."
::= { ospfNewCfgRangeEntry 6 }
ospfNewCfgRangeDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ospfNewCfgRangeEntry 7 }
ospfRouteRedistribution OBJECT IDENTIFIER ::= { ospfCfg 4 }
ospfRedistributeStatic OBJECT IDENTIFIER ::= { ospfRouteRedistribution 1 }
ospfCurCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned to static routes.
A value of 0 indicates none."
::= { ospfRedistributeStatic 1 }
ospfNewCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric to be assigned to static routes.
A value of 0 indicates none."
::= { ospfRedistributeStatic 2 }
ospfCurCfgStaticMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for static routes."
::= { ospfRedistributeStatic 3 }
ospfNewCfgStaticMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for static routes."
::= { ospfRedistributeStatic 4 }
ospfCurCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeStatic 5 }
ospfNewCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeStatic 6 }
ospfNewCfgStaticAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeStatic 7 }
ospfNewCfgStaticRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeStatic 8 }
ospfRedistributeFixed OBJECT IDENTIFIER ::= { ospfRouteRedistribution 4 }
ospfCurCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for fixed routes. A value of 0 indicates none"
::= { ospfRedistributeFixed 1 }
ospfNewCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for fixed routes. A value of 0 indicates none"
::= { ospfRedistributeFixed 2 }
ospfCurCfgFixedMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for fixed routes."
::= { ospfRedistributeFixed 3 }
ospfNewCfgFixedMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for fixed routes."
::= { ospfRedistributeFixed 4 }
ospfCurCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeFixed 5 }
ospfNewCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeFixed 6 }
ospfNewCfgFixedAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeFixed 7 }
ospfNewCfgFixedRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeFixed 8 }
ospfRedistributeRip OBJECT IDENTIFIER ::= { ospfRouteRedistribution 5 }
ospfCurCfgRipMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ospfRedistributeRip 1 }
ospfNewCfgRipMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ospfRedistributeRip 2 }
ospfCurCfgRipMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for RIP routes."
::= { ospfRedistributeRip 3 }
ospfNewCfgRipMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for RIP routes."
::= { ospfRedistributeRip 4 }
ospfCurCfgRipOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeRip 5 }
ospfNewCfgRipOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeRip 6 }
ospfNewCfgRipAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeRip 7 }
ospfNewCfgRipRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeRip 8 }
ipCurCfgRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ipGeneralCfg 1 }
ipNewCfgRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ipGeneralCfg 2 }
-- IGMP Snooping config
igmpCurCfgOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Globally turn IGMP On/Off."
::= { igmpCfg 1}
igmpNewCfgOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn IGMP On/Off."
::= { igmpCfg 2}
igmpSnoopCfgGen OBJECT IDENTIFIER ::= { igmpCfg 3 }
igmpStaticMrtrCfg OBJECT IDENTIFIER ::= { igmpCfg 4 }
igmpFilterCfg OBJECT IDENTIFIER ::= { igmpCfg 5 }
igmpSnoopCfg OBJECT IDENTIFIER ::= { igmpSnoopCfgGen 1 }
igmpSnoopCurCfgTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set IGMP Report timeout."
::= { igmpSnoopCfg 1 }
igmpSnoopNewCfgTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IGMP Report timeout."
::= { igmpSnoopCfg 2 }
igmpSnoopCurCfgMrto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of multicast router timeout in the current config."
::= { igmpSnoopCfg 3 }
igmpSnoopNewCfgMrto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of multicast router timeout in the new config."
::= { igmpSnoopCfg 4 }
igmpSnoopNewCfgVlanFastlvAdd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be added to fastleave vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 12 }
igmpSnoopNewCfgVlanFastlvRem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be removed from fastleave vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 13 }
igmpSnoopCurCfgVlanFastlvBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fastlv enabled vlans present in the in vlan map list.
The fastlv enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fastlv enabled
0 - The represented vlan does not have fastlv enabled."
::= { igmpSnoopCfg 14 }
igmpSnoopNewCfgVlanFastlvBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fastlv enabled vlans present in the in vlan map list.
The fastlv enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fastlv enabled
0 - The represented vlan does not have fastlv enabled."
::= { igmpSnoopCfg 15 }
igmpSnoopCurCfgRobust OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of expected packet loss on subnet in the current config."
::= { igmpSnoopCfg 16 }
igmpSnoopNewCfgRobust OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of expected packet loss on subnet in the new config."
::= { igmpSnoopCfg 17 }
igmpSnoopNewCfgVlanAdd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be added to snooping vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 18 }
igmpSnoopNewCfgVlanRem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be removed from snooping vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 19 }
igmpSnoopNewCfgVlanClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Removing ALL Snooping Vlans."
::= { igmpSnoopCfg 20 }
igmpSnoopCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The snooping vlans present in the in vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled."
::= { igmpSnoopCfg 21 }
igmpSnoopNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The snooping vlans present in the in vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled."
::= { igmpSnoopCfg 22 }
igmpSnoopCurCfgQInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGMP Query Interval of current config."
::= { igmpSnoopCfg 23 }
igmpSnoopNewCfgQInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IGMP Query Interval of new config."
::= { igmpSnoopCfg 24 }
igmpSnoopCurCfgSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in current config."
::= { igmpSnoopCfg 25 }
igmpSnoopNewCfgSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in new config."
::= { igmpSnoopCfg 26 }
igmpSnoopCurCfgAggrEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Report aggregation."
::= { igmpSnoopCfg 27}
igmpSnoopNewCfgAggrEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Report aggregation."
::= { igmpSnoopCfg 28}
igmpSnoopCurCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of flood unregistered IPMC"
::= { igmpSnoopCfg 29}
igmpSnoopNewCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of flood unregistered IPMC"
::= { igmpSnoopCfg 30}
-- IGMP Static Mrtr Support
igmpStaticMrtrCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMrtrCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP Static Multicast Router table in the current configuration block."
::= { igmpStaticMrtrCfg 1 }
igmpStaticMrtrCurCfgTableEntry OBJECT-TYPE
SYNTAX IgmpStaticMrtrCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Static Multicast Router table."
INDEX { igmpStaticMrtrCurCfgIndx }
::= { igmpStaticMrtrCurCfgTable 1 }
IgmpStaticMrtrCurCfgTableEntry ::= SEQUENCE {
igmpStaticMrtrCurCfgIndx Integer32,
igmpStaticMrtrCurCfgPortId Integer32,
igmpStaticMrtrCurCfgVlanId Integer32,
igmpStaticMrtrCurCfgVersion INTEGER
}
igmpStaticMrtrCurCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router table port index."
::= { igmpStaticMrtrCurCfgTableEntry 1 }
igmpStaticMrtrCurCfgPortId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the current configuration block."
::= { igmpStaticMrtrCurCfgTableEntry 2 }
igmpStaticMrtrCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the current configuration block."
::= { igmpStaticMrtrCurCfgTableEntry 3 }
igmpStaticMrtrCurCfgVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP version of the IGMP Static Multicast Router."
::= { igmpStaticMrtrCurCfgTableEntry 4 }
igmpStaticMrtrNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMrtrNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP Static Multicast Router table in the new configuration block."
::= { igmpStaticMrtrCfg 2 }
igmpStaticMrtrNewCfgTableEntry OBJECT-TYPE
SYNTAX IgmpStaticMrtrNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Static Multicast Router table."
INDEX { igmpStaticMrtrNewCfgIndx }
::= { igmpStaticMrtrNewCfgTable 1 }
IgmpStaticMrtrNewCfgTableEntry ::= SEQUENCE {
igmpStaticMrtrNewCfgIndx Integer32,
igmpStaticMrtrNewCfgPortId Integer32,
igmpStaticMrtrNewCfgVlanId Integer32,
igmpStaticMrtrNewCfgVersion INTEGER,
igmpStaticMrtrNewCfgDelete INTEGER
}
igmpStaticMrtrNewCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router table port index."
::= { igmpStaticMrtrNewCfgTableEntry 1 }
igmpStaticMrtrNewCfgPortId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the new configuration block."
::= { igmpStaticMrtrNewCfgTableEntry 2 }
igmpStaticMrtrNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the new configuration block."
::= { igmpStaticMrtrNewCfgTableEntry 3 }
igmpStaticMrtrNewCfgVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IGMP version of the IGMP Static Multicast Router."
::= { igmpStaticMrtrNewCfgTableEntry 4 }
igmpStaticMrtrNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { igmpStaticMrtrNewCfgTableEntry 5 }
-- IGMP Filtering
igmpFltCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering table in the current configuration block."
::= { igmpFilterCfg 1 }
igmpFltCurCfgTableEntry OBJECT-TYPE
SYNTAX IgmpFltCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the filtering table."
INDEX { igmpFltCurCfgIndx }
::= { igmpFltCurCfgTable 1 }
IgmpFltCurCfgTableEntry ::= SEQUENCE {
igmpFltCurCfgIndx Integer32,
igmpFltCurCfgMcastIp1 IpAddress,
igmpFltCurCfgMcastIp2 IpAddress,
igmpFltCurCfgAction INTEGER,
igmpFltCurCfgState INTEGER
}
igmpFltCurCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filter table index."
::= { igmpFltCurCfgTableEntry 1 }
igmpFltCurCfgMcastIp1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Range1 Multicast IP address to be filtered."
::= { igmpFltCurCfgTableEntry 2 }
igmpFltCurCfgMcastIp2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Range2 Multicast IP address to be filtered."
::= { igmpFltCurCfgTableEntry 3 }
igmpFltCurCfgAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action for the IGMP filtering rule."
::= { igmpFltCurCfgTableEntry 4 }
igmpFltCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this IGMP filtering rule."
::= { igmpFltCurCfgTableEntry 5 }
igmpFltNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering table in the current configuration block."
::= { igmpFilterCfg 2 }
igmpFltNewCfgTableEntry OBJECT-TYPE
SYNTAX IgmpFltNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the filtering table."
INDEX { igmpFltNewCfgIndx }
::= { igmpFltNewCfgTable 1 }
IgmpFltNewCfgTableEntry ::= SEQUENCE {
igmpFltNewCfgIndx Integer32,
igmpFltNewCfgMcastIp1 IpAddress,
igmpFltNewCfgMcastIp2 IpAddress,
igmpFltNewCfgAction INTEGER,
igmpFltNewCfgState INTEGER,
igmpFltNewCfgDelete INTEGER
}
igmpFltNewCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filter table index."
::= { igmpFltNewCfgTableEntry 1 }
igmpFltNewCfgMcastIp1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Range1 Multicast source IP address to be filtered."
::= { igmpFltNewCfgTableEntry 2 }
igmpFltNewCfgMcastIp2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Range2 Multicast source IP address to be filtered."
::= { igmpFltNewCfgTableEntry 3 }
igmpFltNewCfgAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action for the IGMP filtering rule."
::= { igmpFltNewCfgTableEntry 4 }
igmpFltNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of this IGMP filtering rule."
::= { igmpFltNewCfgTableEntry 5 }
igmpFltNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { igmpFltNewCfgTableEntry 6 }
-- IGMP Filtering Port Table
igmpFltCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering port table in the current configuration block."
::= { igmpFilterCfg 3 }
igmpFltCurCfgPortTableEntry OBJECT-TYPE
SYNTAX IgmpFltCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP filtering port table."
INDEX { igmpFltCurCfgPortIndx }
::= { igmpFltCurCfgPortTable 1 }
IgmpFltCurCfgPortTableEntry ::= SEQUENCE {
igmpFltCurCfgPortIndx Integer32,
igmpFltCurCfgPortState INTEGER,
igmpFltCurCfgPortFiltBmap OCTET STRING
}
igmpFltCurCfgPortIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { igmpFltCurCfgPortTableEntry 1 }
igmpFltCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IGMP filtering."
::= { igmpFltCurCfgPortTableEntry 2 }
igmpFltCurCfgPortFiltBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to igmpFltCurCfgTable)
where x : 1 - The represented IGMP filter rule applied to the port
0 - The represented IGMP filter rule not applied to the port "
::= { igmpFltCurCfgPortTableEntry 3 }
igmpFltNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering port table in the new configuration block."
::= { igmpFilterCfg 4 }
igmpFltNewCfgPortTableEntry OBJECT-TYPE
SYNTAX IgmpFltNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP filtering port table."
INDEX { igmpFltNewCfgPortIndx }
::= { igmpFltNewCfgPortTable 1 }
IgmpFltNewCfgPortTableEntry ::= SEQUENCE {
igmpFltNewCfgPortIndx Integer32,
igmpFltNewCfgPortState INTEGER,
igmpFltNewCfgPortFiltBmap OCTET STRING,
igmpFltNewCfgPortAddFiltRule Integer32,
igmpFltNewCfgPortRemFiltRule Integer32
}
igmpFltNewCfgPortIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { igmpFltNewCfgPortTableEntry 1 }
igmpFltNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable IGMP filtering."
::= { igmpFltNewCfgPortTableEntry 2 }
igmpFltNewCfgPortFiltBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the port "
::= { igmpFltNewCfgPortTableEntry 3 }
igmpFltNewCfgPortAddFiltRule OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the
value '0' is returned always."
::= { igmpFltNewCfgPortTableEntry 4 }
igmpFltNewCfgPortRemFiltRule OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read,
the value '0' is returned always."
::= { igmpFltNewCfgPortTableEntry 5 }
igmpFltCurCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Filtering."
::= { igmpFilterCfg 5 }
igmpFltNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Filtering."
::= { igmpFilterCfg 6 }
-- Statistics
-- RIPv2 Statistics
ripStatInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP packets recieved."
::= { rip2Stats 1 }
ripStatOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP packets transmitted."
::= { rip2Stats 2 }
ripStatInRequestPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP requests recieved."
::= { rip2Stats 3 }
ripStatInResponsePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP response recieved."
::= { rip2Stats 4 }
ripStatOutRequestPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP requests transmitted."
::= { rip2Stats 5 }
ripStatOutResponsePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP responses transmitted."
::= { rip2Stats 6 }
ripStatRouteTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP route timeouts."
::= { rip2Stats 7 }
ripStatInBadSizePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bad size RIP packets recieved."
::= { rip2Stats 8 }
ripStatInBadVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad versions recieved."
::= { rip2Stats 9 }
ripStatInBadZeros OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad zeros recieved."
::= { rip2Stats 10 }
ripStatInBadSourcePort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad source port recieved."
::= { rip2Stats 11 }
ripStatInBadSourceIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad source IP recieved."
::= { rip2Stats 12 }
ripStatInSelfRcvPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP packets from self received."
::= { rip2Stats 13 }
--DNS Statistics
dnsStatInGoodDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of good DNS request packets received."
::= { dnsStats 1 }
dnsStatOutDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DNS request packets"
::= { dnsStats 2 }
dnsStatInBadDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bad DNS request packets received"
::= { dnsStats 3 }
-- GEAL3 Stats
maxL3TableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max L3 table size"
::= {geal3Stats 1}
noL3EntriesUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of L3 entries used"
::= {geal3Stats 2}
maxLpmTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max LPM table size"
::= {geal3Stats 3}
noLpmEntriesUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of LPM entries used"
::= {geal3Stats 4}
maxBlockInLpmTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max number of blocks in LPM table"
::= {geal3Stats 5}
noBlocksUsedInLpmTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks used in LPM table"
::= {geal3Stats 6}
-- ARP Statistics Group
arpStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of ARP entries."
::= { arpStats 1 }
arpStatHighWater OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of ARP entries."
::= { arpStats 2 }
arpStatMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of ARP entries."
::= { arpStats 3 }
-- ROUTE Statistics Group
routeStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of IP routes."
::= { routeStats 1 }
routeStatHighWater OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of IP routes."
::= { routeStats 2 }
routeStatMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IP routes."
::= { routeStats 3 }
-- The VRRP Statistics
vrrpStatInAdvers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good VRRP advertisements which are received."
::= { vrrpStats 1 }
vrrpStatOutAdvers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good VRRP advertisements which are transmitted."
::= { vrrpStats 2 }
vrrpStatOutBadAdvers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP advertisements which are received."
::= { vrrpStats 3 }
vrrpStatBadVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP version adv which are received."
::= { vrrpStats 4 }
vrrpStatBadAddress OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP addres adv which are received."
::= { vrrpStats 5 }
vrrpStatBadPassword OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP advertisements which are received."
::= { vrrpStats 6 }
vrrpStatBadVrid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP version ID adv which are received."
::= { vrrpStats 7 }
vrrpStatBadData OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP advertisements which are received."
::= { vrrpStats 8 }
vrrpStatBadInterval OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP iutervals which are received."
::= { vrrpStats 9 }
-- Clear Statistics for ip and ip interface
ipClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the IP statistics."
::= { clearStats 1 }
vrrpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the VRRP statistics."
::= { clearStats 2 }
ripClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the RIP statistics."
::= { clearStats 4 }
ospfClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the OSPF statistics."
::= { clearStats 5 }
tcpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the TCP statistics."
::= { clearStats 6 }
udpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the UDP statistics."
::= { clearStats 7 }
dnsClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the DNS statistics."
::= { clearStats 8 }
arpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ARP statistics."
::= { clearStats 9 }
icmpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ICMP statistics."
::= { clearStats 10 }
routeClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the Route statistics."
::= { clearStats 11 }
-- igmp stats
igmpClearAllStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the IGMP statistics."
::= { igmpStats 2 }
-- Ospf Statistics
-- Ospf Statistics for all interfaces and OSPF areas
ospfGeneralStats OBJECT IDENTIFIER ::= { ospfStats 1 }
ospfCumRxTxStats OBJECT IDENTIFIER ::= { ospfGeneralStats 1 }
ospfCumNbrChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 2 }
ospfCumIntfChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 3 }
ospfTimersKickOffStats OBJECT IDENTIFIER ::= { ospfGeneralStats 4 }
-- Ospf Statistics / Area
ospfArea OBJECT IDENTIFIER ::= { ospfStats 2 }
ospfAreaRxTxStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Rx/Tx Statistics."
::= { ospfArea 1 }
ospfAreaRxTxStatsEntry OBJECT-TYPE
SYNTAX OspfAreaRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rx Tx packet Statistics about a OSPF area."
INDEX { ospfAreaRxTxIndex }
::= { ospfAreaRxTxStats 1 }
OspfAreaRxTxStatsEntry ::= SEQUENCE {
ospfAreaRxTxIndex Integer32,
ospfAreaRxPkts Counter32,
ospfAreaTxPkts Counter32,
ospfAreaRxHello Counter32,
ospfAreaTxHello Counter32,
ospfAreaRxDatabase Counter32,
ospfAreaTxDatabase Counter32,
ospfAreaRxlsReqs Counter32,
ospfAreaTxlsReqs Counter32,
ospfAreaRxlsAcks Counter32,
ospfAreaTxlsAcks Counter32,
ospfAreaRxlsUpdates Counter32,
ospfAreaTxlsUpdates Counter32
}
ospfAreaRxTxIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ospf Area for which these statistics apply."
::= { ospfAreaRxTxStatsEntry 1 }
ospfAreaRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets received in this OSPF area."
::= { ospfAreaRxTxStatsEntry 2 }
ospfAreaTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets transmitted in this OSPF area."
::= { ospfAreaRxTxStatsEntry 3 }
ospfAreaRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received in this OSPF area."
::= { ospfAreaRxTxStatsEntry 4 }
ospfAreaTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets transmitted in this OSPF
area."
::= { ospfAreaRxTxStatsEntry 5 }
ospfAreaRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this OSPF area."
::= { ospfAreaRxTxStatsEntry 6 }
ospfAreaTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this OSPF area."
::= { ospfAreaRxTxStatsEntry 7 }
ospfAreaRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets received for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 8 }
ospfAreaTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets transmitted for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 9 }
ospfAreaRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets received for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 10 }
ospfAreaTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets transmitted
for this OSPF area."
::= { ospfAreaRxTxStatsEntry 11 }
ospfAreaRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets received for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 12 }
ospfAreaTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets transmitted for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 13 }
ospfAreaNbrChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Neighbour Statistics."
::= { ospfArea 2 }
ospfAreaNbrChangeStatsEntry OBJECT-TYPE
SYNTAX OspfAreaNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area Neighbour Change Statistics about a OSPF area."
INDEX { ospfAreaNbrIndex }
::= { ospfAreaNbrChangeStats 1 }
OspfAreaNbrChangeStatsEntry ::= SEQUENCE {
ospfAreaNbrIndex Integer32,
ospfAreaNbrhello Counter32,
ospfAreaNbrStart Counter32,
ospfAreaNbrAdjointOk Counter32,
ospfAreaNbrNegotiationDone Counter32,
ospfAreaNbrExchangeDone Counter32,
ospfAreaNbrBadRequests Counter32,
ospfAreaNbrBadSequence Counter32,
ospfAreaNbrLoadingDone Counter32,
ospfAreaNbrN1way Counter32,
ospfAreaNbrRstAd Counter32,
ospfAreaNbrDown Counter32,
ospfAreaNbrN2way Counter32
}
ospfAreaNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ospf Area for which these statistics apply."
::= { ospfAreaNbrChangeStatsEntry 1 }
ospfAreaNbrhello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours
in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 2 }
ospfAreaNbrStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 3 }
ospfAreaNbrAdjointOk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 4 }
ospfAreaNbrNegotiationDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 5 }
ospfAreaNbrExchangeDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 6 }
ospfAreaNbrBadRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 7 }
ospfAreaNbrBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 8 }
ospfAreaNbrLoadingDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link state updates received for all
out-of-date portions of the database in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 9 }
ospfAreaNbrN1way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is not mentioned in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 10 }
ospfAreaNbrRstAd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Neighbour adjacency has been reset
across this OPSF area."
::= { ospfAreaNbrChangeStatsEntry 11 }
ospfAreaNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 12 }
ospfAreaNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is mentioned in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 13 }
ospfAreaChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Change Statistics."
::= { ospfArea 3 }
ospfAreaChangeStatsEntry OBJECT-TYPE
SYNTAX OspfAreaChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area Change Statistics about a OSPF area."
INDEX { ospfAreaIntfIndex }
::= { ospfAreaChangeStats 1 }
OspfAreaChangeStatsEntry ::= SEQUENCE {
ospfAreaIntfIndex Integer32,
ospfAreaIntfHello Counter32,
ospfAreaIntfDown Counter32,
ospfAreaIntfLoop Counter32,
ospfAreaIntfUnloop Counter32,
ospfAreaIntfWaitTimer Counter32,
ospfAreaIntfBackup Counter32,
ospfAreaIntfNbrChange Counter32
}
ospfAreaIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Area for which these statistics apply."
::= { ospfAreaChangeStatsEntry 1 }
ospfAreaIntfHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets sent on this OSPF area."
::= { ospfAreaChangeStatsEntry 2 }
ospfAreaIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces down in this OSPF area."
::= { ospfAreaChangeStatsEntry 3 }
ospfAreaIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces no longer connected to
the attatched network in this OSPF area."
::= { ospfAreaChangeStatsEntry 4 }
ospfAreaIntfUnloop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces connected to the attatched
network in this OSPF area.."
::= { ospfAreaChangeStatsEntry 5 }
ospfAreaIntfWaitTimer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF area."
::= { ospfAreaChangeStatsEntry 6 }
ospfAreaIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Backup Designated Routers on the attatched
network for this OSPF area."
::= { ospfAreaChangeStatsEntry 7 }
ospfAreaIntfNbrChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes in the set of bidirectional neighbours
associated with the interface in this OSPF area."
::= { ospfAreaChangeStatsEntry 8 }
ospfAreaErrorStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Error Statistics."
::= { ospfArea 4 }
ospfAreaErrorStatsEntry OBJECT-TYPE
SYNTAX OspfAreaErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error Statistics for an OSPF area."
INDEX { ospfAreaErrIndex }
::= { ospfAreaErrorStats 1 }
OspfAreaErrorStatsEntry ::= SEQUENCE {
ospfAreaErrIndex Integer32,
ospfAreaErrAuthFailure Counter32,
ospfAreaErrNetmaskMismatch Counter32,
ospfAreaErrHelloMismatch Counter32,
ospfAreaErrDeadMismatch Counter32,
ospfAreaErrOptionsMismatch Counter32,
ospfAreaErrUnknownNbr Counter32,
ospfAreaErrAreaMismatch Counter32
}
ospfAreaErrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Area for which these statistics apply."
::= { ospfAreaErrorStatsEntry 1 }
ospfAreaErrAuthFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong password in
this area."
::= { ospfAreaErrorStatsEntry 2 }
ospfAreaErrNetmaskMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong netmask in
this area."
::= { ospfAreaErrorStatsEntry 3 }
ospfAreaErrHelloMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different hello interval
in this area."
::= { ospfAreaErrorStatsEntry 4 }
ospfAreaErrDeadMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different dead interval
in this area."
::= { ospfAreaErrorStatsEntry 5 }
ospfAreaErrOptionsMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different options
in this area."
::= { ospfAreaErrorStatsEntry 6 }
ospfAreaErrUnknownNbr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received from an unknown neighbor
in this area."
::= { ospfAreaErrorStatsEntry 7 }
ospfAreaErrAreaMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong area."
::= { ospfAreaErrorStatsEntry 8 }
-- Ospf Statistics / Interface
ospfInterface OBJECT IDENTIFIER ::= { ospfStats 3 }
ospfIntfRxTxStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Rx/Tx packet Statistics."
::= { ospfInterface 1 }
ospfIntfRxTxStatsEntry OBJECT-TYPE
SYNTAX OspfIntfRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF interface Rx/Tx packet statistics."
INDEX { ospfIntfRxTxIndex }
::= { ospfIntfRxTxStats 1 }
OspfIntfRxTxStatsEntry ::= SEQUENCE {
ospfIntfRxTxIndex Integer32,
ospfIntfRxPkts Counter32,
ospfIntfTxPkts Counter32,
ospfIntfRxHello Counter32,
ospfIntfTxHello Counter32,
ospfIntfRxDatabase Counter32,
ospfIntfTxDatabase Counter32,
ospfIntfRxlsReqs Counter32,
ospfIntfTxlsReqs Counter32,
ospfIntfRxlsAcks Counter32,
ospfIntfTxlsAcks Counter32,
ospfIntfRxlsUpdates Counter32,
ospfIntfTxlsUpdates Counter32
}
ospfIntfRxTxIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF interface for which these statistics apply."
::= { ospfIntfRxTxStatsEntry 1 }
ospfIntfRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets received for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 2 }
ospfIntfTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets transmitted for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 3 }
ospfIntfRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 4 }
ospfIntfTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 5 }
ospfIntfRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 6 }
ospfIntfTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 7 }
ospfIntfRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 8 }
ospfIntfTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 9 }
ospfIntfRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 10 }
ospfIntfTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 11 }
ospfIntfRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets received for
this OSPF interface."
::= { ospfIntfRxTxStatsEntry 12 }
ospfIntfTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets transmitted for
this OSPF interface."
::= { ospfIntfRxTxStatsEntry 13 }
ospfIntfNbrChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Neighbour change Statistics."
::= { ospfInterface 2 }
ospfIntfNbrChangeStatsEntry OBJECT-TYPE
SYNTAX OspfIntfNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF interface Neighbour Change statistics."
INDEX { ospfIntfNbrIndex }
::= { ospfIntfNbrChangeStats 1 }
OspfIntfNbrChangeStatsEntry ::= SEQUENCE {
ospfIntfNbrIndex Integer32,
ospfIntfNbrhello Counter32,
ospfIntfNbrStart Counter32,
ospfIntfNbrAdjointOk Counter32,
ospfIntfNbrNegotiationDone Counter32,
ospfIntfNbrExchangeDone Counter32,
ospfIntfNbrBadRequests Counter32,
ospfIntfNbrBadSequence Counter32,
ospfIntfNbrLoadingDone Counter32,
ospfIntfNbrN1way Counter32,
ospfIntfNbrRstAd Counter32,
ospfIntfNbrDown Counter32,
ospfIntfNbrN2way Counter32
}
ospfIntfNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Interface for which these statistics apply."
::= { ospfIntfNbrChangeStatsEntry 1 }
ospfIntfNbrhello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours
in this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 2 }
ospfIntfNbrStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 3 }
ospfIntfNbrAdjointOk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 4 }
ospfIntfNbrNegotiationDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 5 }
ospfIntfNbrExchangeDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 6 }
ospfIntfNbrBadRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Requests which have been received
for a link state advertisement not contained in the database for
this interface."
::= { ospfIntfNbrChangeStatsEntry 7 }
ospfIntfNbrBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this interface."
::= { ospfIntfNbrChangeStatsEntry 8 }
ospfIntfNbrLoadingDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link state updates received for all
out-of-date portions of the database for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 9 }
ospfIntfNbrN1way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is not mentioned for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 10 }
ospfIntfNbrRstAd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Neighbour adjacency has been reset
on this interface."
::= { ospfIntfNbrChangeStatsEntry 11 }
ospfIntfNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) for this interface."
::= { ospfIntfNbrChangeStatsEntry 12 }
ospfIntfNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is mentioned for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 13 }
ospfIntfChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface change Statistics."
::= { ospfInterface 3 }
ospfIntfChangeStatsEntry OBJECT-TYPE
SYNTAX OspfIntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF interface Change statistics."
INDEX { ospfIntfIndex }
::= { ospfIntfChangeStats 1 }
OspfIntfChangeStatsEntry ::= SEQUENCE {
ospfIntfIndex Integer32,
ospfIntfHello Counter32,
ospfIntfDown Counter32,
ospfIntfLoop Counter32,
ospfIntfUnloop Counter32,
ospfIntfWaitTimer Counter32,
ospfIntfBackup Counter32,
ospfIntfNbrChange Counter32
}
ospfIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Interface for which these statistics apply."
::= { ospfIntfChangeStatsEntry 1 }
ospfIntfHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets sent by this interface."
::= { ospfIntfChangeStatsEntry 2 }
ospfIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the interface was down."
::= { ospfIntfChangeStatsEntry 3 }
ospfIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the interface was no longer connected to
the attatched network."
::= { ospfIntfChangeStatsEntry 4 }
ospfIntfUnloop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the interface, connected back to
the attatched network."
::= { ospfIntfChangeStatsEntry 5 }
ospfIntfWaitTimer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF interface."
::= { ospfIntfChangeStatsEntry 6 }
ospfIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Backup Designated Routers on the attatched
network for this OSPF interface."
::= { ospfIntfChangeStatsEntry 7 }
ospfIntfNbrChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes in the set of bidirectional neighbours
associated with the interface for this OSPF interface."
::= { ospfIntfChangeStatsEntry 8 }
ospfIntfErrorStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Error Statistics."
::= { ospfInterface 4 }
ospfIntfErrorStatsEntry OBJECT-TYPE
SYNTAX OspfIntfErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error Statistics for an OSPF area."
INDEX { ospfIntfErrIndex }
::= { ospfIntfErrorStats 1 }
OspfIntfErrorStatsEntry ::= SEQUENCE {
ospfIntfErrIndex Integer32,
ospfIntfErrAuthFailure Counter32,
ospfIntfErrNetmaskMismatch Counter32,
ospfIntfErrHelloMismatch Counter32,
ospfIntfErrDeadMismatch Counter32,
ospfIntfErrOptionsMismatch Counter32,
ospfIntfErrUnknownNbr Counter32,
ospfIntfErrAreaMismatch Counter32
}
ospfIntfErrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Intf for which these statistics apply."
::= { ospfIntfErrorStatsEntry 1 }
ospfIntfErrAuthFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong password in
this area."
::= { ospfIntfErrorStatsEntry 2 }
ospfIntfErrNetmaskMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong netmask in
this area."
::= { ospfIntfErrorStatsEntry 3 }
ospfIntfErrHelloMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different hello interval
in this area."
::= { ospfIntfErrorStatsEntry 4 }
ospfIntfErrDeadMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different dead interval
in this area."
::= { ospfIntfErrorStatsEntry 5 }
ospfIntfErrOptionsMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different options
in this area."
::= { ospfIntfErrorStatsEntry 6 }
ospfIntfErrUnknownNbr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received from an unknown neighbor
in this area."
::= { ospfIntfErrorStatsEntry 7 }
ospfIntfErrAreaMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong area."
::= { ospfIntfErrorStatsEntry 8 }
-- Ospf General Statistics contains the cumulative stats for all
-- areas / interfaces
ospfCumRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all OSPF packets received on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 1 }
ospfCumTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all OSPF packets transmitted on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 2 }
ospfCumRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Hello packets received on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 3 }
ospfCumTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Hello packets transmitted on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 4 }
ospfCumRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Database Description packets received on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 5 }
ospfCumTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Database Description packets transmitted on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 6 }
ospfCumRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Request packets received on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 7 }
ospfCumTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Request packets transmitted on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 8 }
ospfCumRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Acknowledgement packets received
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 9 }
ospfCumTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Acknowledgement packets transmitted
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 10 }
ospfCumRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Update packets received
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 11 }
ospfCumTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Update packets transmitted
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 12 }
ospfCumNbrhello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Hello packets received from neighbours
on all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 1 }
ospfCumNbrStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) across all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 2 }
ospfCumNbrAdjointOk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour
across all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 3 }
ospfCumNbrNegotiationDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, across all OSPF areas and
interfaces."
::= { ospfCumNbrChangeStats 4 }
ospfCumNbrExchangeDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, across all OSPF areas
and interfaces."
::= { ospfCumNbrChangeStats 5 }
ospfCumNbrBadRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
all interfaces and OSPF areas."
::= { ospfCumNbrChangeStats 6 }
ospfCumNbrBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 7 }
ospfCumNbrLoadingDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of link state updates received for all
out-of-date portions of the database across all OSPF areas
and interfaces."
::= { ospfCumNbrChangeStats 8 }
ospfCumNbrN1way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Hello packets received from neighbours, in
which this router is not mentioned across all OSPF interfaces
and areas."
::= { ospfCumNbrChangeStats 9 }
ospfCumNbrRstAd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Neighbour adjacency has been reset
across all OPSF areas and interfaces."
::= { ospfCumNbrChangeStats 10 }
ospfCumNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) across all OSPF areas and
interfaces."
::= { ospfCumNbrChangeStats 11 }
ospfCumNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Hello packets received from neighbours, in
which this router is mentioned across all OSPF interfaces
and areas."
::= { ospfCumNbrChangeStats 12 }
ospfCumIntfHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Hello packets sent on all interfaces
and areas"
::= { ospfCumIntfChangeStats 1 }
ospfCumIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of interfaces down in all OSPF areas."
::= { ospfCumIntfChangeStats 2 }
ospfCumIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of interfaces no longer connected to
the attatched network across all OSPF areas and interfaces."
::= { ospfCumIntfChangeStats 3 }
ospfCumIntfUnloop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of interfaces, connected to
the attatched network in all OSPF areas."
::= { ospfCumIntfChangeStats 4 }
ospfCumIntfWaitTimer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) across all
OSPF areas and interfaces."
::= { ospfCumIntfChangeStats 5 }
ospfCumIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Backup Designated Routers on the attatched
network for all OSPF areas and interfaces."
::= { ospfCumIntfChangeStats 6 }
ospfCumIntfNbrChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of changes in the set of bidirectional
neighbours associated with any interface across all OSPF areas."
::= { ospfCumIntfChangeStats 7 }
ospfTmrsKckOffHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Hello timer has been fired
(which triggers the send of a Hello packet) across all OPSF
areas and interfaces."
::= { ospfTimersKickOffStats 1 }
ospfTmrsKckOffRetransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Retransmit timer has been
fired across all OPSF areas and interfaces."
::= { ospfTimersKickOffStats 2 }
ospfTmrsKckOffLsaLock OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Lsa Lock timer has been
fired across all OSPF areas and interfaces."
::= { ospfTimersKickOffStats 3 }
ospfTmrsKckOffLsaAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Lsa Ack timer has been
fired across all ospf areas and interfaces."
::= { ospfTimersKickOffStats 4 }
ospfTmrsKckOffDbage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Dbage has been fired."
::= { ospfTimersKickOffStats 5 }
ospfTmrsKckOffSummary OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Summary timer has been fired."
::= { ospfTimersKickOffStats 6 }
ospfTmrsKckOffAseExport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the ASE Export timer has been fired."
::= { ospfTimersKickOffStats 7 }
-- IP statistics
ipStatsInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InReceive"
::= { ipStats 1 }
ipStatsInHdrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InHdrError"
::= { ipStats 2 }
ipStatsInAddrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InAddrErrors"
::= { ipStats 3 }
ipStatsInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InUnknownProtos"
::= { ipStats 4 }
ipStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InDiscards"
::= { ipStats 5 }
ipStatsInDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InDelivers"
::= { ipStats 6 }
ipStatsOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip OutRequests"
::= { ipStats 7 }
ipStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip OutDiscards"
::= { ipStats 8 }
ipStatsDefaultTTL OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip DefaultTTL"
::= { ipStats 9 }
-- IGMP Snooping statistics
igmpSnoopStats OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Error Statistics."
::= { igmpStats 1 }
igmpSnoopStatsEntry OBJECT-TYPE
SYNTAX IgmpSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for IGMP Snooping."
INDEX { igmpSnoopVlanIndex }
::= { igmpSnoopStats 1 }
IgmpSnoopStatsEntry ::= SEQUENCE {
igmpSnoopVlanIndex Integer32,
rxIgmpValidPkts Counter32,
rxIgmpInvalidPkts Counter32,
rxIgmpGenQueries Counter32,
rxIgmpGrpSpecificQueries Counter32,
rxIgmpLeaves Counter32,
rxIgmpReports Counter32,
txIgmpGrpSpecificQueries Counter32,
txIgmpReports Counter32,
igmpClearVlanStats INTEGER,
txIgmpLeaves Counter32
}
igmpSnoopVlanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VLAN for which these statistics apply."
::= { igmpSnoopStatsEntry 1 }
rxIgmpValidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of valid IGMP packets received
on this VLAN."
::= { igmpSnoopStatsEntry 2 }
rxIgmpInvalidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid IGMP packets received
on this VLAN."
::= { igmpSnoopStatsEntry 3 }
rxIgmpGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP General Query packets received
on this VLAN."
::= { igmpSnoopStatsEntry 4 }
rxIgmpGrpSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Specific Query packets received
on this VLAN."
::= { igmpSnoopStatsEntry 5 }
rxIgmpLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Leave packets received
on this VLAN."
::= { igmpSnoopStatsEntry 6 }
rxIgmpReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Report packets received
on this VLAN."
::= { igmpSnoopStatsEntry 7 }
txIgmpGrpSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Specific Query packets
transmitted on this VLAN."
::= { igmpSnoopStatsEntry 8 }
txIgmpReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Report packets transmitted
on this VLAN."
::= { igmpSnoopStatsEntry 9 }
txIgmpLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Leave packets transmitted
on this VLAN."
::= { igmpSnoopStatsEntry 10 }
igmpClearVlanStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the statistics for this
snooping VLAN."
::= { igmpSnoopStatsEntry 11 }
-- Information - Run-time IP Route Table
ipRouteInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP routes."
::= { ipRoutingInfo 1 }
ipRouteInfoEntry OBJECT-TYPE
SYNTAX IpRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP route table"
INDEX { ipRouteInfoIndx }
::= { ipRouteInfoTable 1 }
IpRouteInfoEntry ::= SEQUENCE {
ipRouteInfoIndx Integer32,
ipRouteInfoDestIp IpAddress,
ipRouteInfoMask IpAddress,
ipRouteInfoGateway IpAddress,
ipRouteInfoTag INTEGER,
ipRouteInfoType INTEGER,
ipRouteInfoInterface Integer32,
ipRouteInfoMetric Integer32
}
ipRouteInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this route table."
::= { ipRouteInfoEntry 1 }
ipRouteInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipRouteInfoEntry 2 }
ipRouteInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP mask of this route."
::= { ipRouteInfoEntry 3 }
ipRouteInfoGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipRouteInfoEntry 4 }
ipRouteInfoTag OBJECT-TYPE
SYNTAX INTEGER {
fixed(1),
static(2),
addr(3),
rip(4),
broadcast(5),
martian(6),
multicast(7),
vip(8),
bgp(9),
ospf(10),
none(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tag-type for this route."
::= { ipRouteInfoEntry 5 }
ipRouteInfoType OBJECT-TYPE
SYNTAX INTEGER {
indirect(1),
direct(2),
local(3),
broadcast(4),
martian(5),
multicast(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the route."
::= { ipRouteInfoEntry 6 }
ipRouteInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the destination address is applicable."
::= { ipRouteInfoEntry 7 }
ipRouteInfoMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of this route."
::= { ipRouteInfoEntry 8 }
routeTableClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the route table."
::= { ipRoutingInfo 2 }
-- Run Time ARP Table
arpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgArpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ARP entries."
::= { arpInfo 1 }
arpInfoEntry OBJECT-TYPE
SYNTAX AgArpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ARP table"
INDEX { arpInfoDestIp }
::= { arpInfoTable 1 }
AgArpInfoEntry ::= SEQUENCE {
arpInfoDestIp IpAddress,
arpInfoMacAddr PhysAddress,
arpInfoVLAN Integer32,
arpInfoSrcPort Integer32,
arpInfoFlag INTEGER
}
arpInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of the ARP entry."
::= { arpInfoEntry 1 }
arpInfoMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { arpInfoEntry 2 }
arpInfoVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier for the ARP entry."
::= { arpInfoEntry 3 }
arpInfoSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number on which this entry's equivalence is effective."
::= { arpInfoEntry 4 }
arpInfoFlag OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
unresolved(2),
permanent(3),
indirect(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag associated with this ARP entry."
::= { arpInfoEntry 6 }
arpCacheClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the ARP cache."
::= { arpInfo 2 }
-- igmp snooping info table
igmpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP group membership information."
::= { igmpInfo 1 }
igmpInfoEntry OBJECT-TYPE
SYNTAX IgmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IGMP group member ."
INDEX { igmpInfoIndex }
::= { igmpInfoTable 1 }
IgmpInfoEntry ::= SEQUENCE {
igmpInfoIndex Integer32,
igmpInfoGroupId IpAddress,
igmpInfoVlanId Integer32,
igmpInfoVersion INTEGER,
igmpInfoPortNum Integer32,
igmpInfoExpires DisplayString
}
igmpInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The igmp group number for which the IGMP info table is related."
::= { igmpInfoEntry 1}
igmpInfoGroupId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the IGMP group."
::= { igmpInfoEntry 2}
igmpInfoVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for this IGMP group."
::= { igmpInfoEntry 3}
igmpInfoVersion OBJECT-TYPE
SYNTAX INTEGER {
v3(1),
v2(2),
v1(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Version of IGMP host."
::= { igmpInfoEntry 5}
igmpInfoPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Version of IGMP host."
::= { igmpInfoEntry 6 }
igmpInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this host."
::= { igmpInfoEntry 7 }
igmpMrtrInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMrtrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP mrouters."
::= { igmpInfo 2 }
igmpMrtrInfoEntry OBJECT-TYPE
SYNTAX IgmpMrtrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IGMP mrouter."
INDEX { igmpMrtrInfoIndex }
::= { igmpMrtrInfoTable 1 }
IgmpMrtrInfoEntry ::= SEQUENCE {
igmpMrtrInfoIndex Integer32,
igmpMrtrInfoVlanId Integer32,
igmpMrtrInfoPortId Integer32,
igmpMrtrInfoVersion Integer32,
igmpMrtrInfoExpires DisplayString,
igmpMrtrInfoMrt Integer32
}
igmpMrtrInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mrouter number for which the IGMP mrouter info table is related."
::= { igmpMrtrInfoEntry 1}
igmpMrtrInfoVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID on which this IGMP mrouter is attached."
::= { igmpMrtrInfoEntry 2}
igmpMrtrInfoPortId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port on which this IGMP mrouter is attached."
::= { igmpMrtrInfoEntry 3}
igmpMrtrInfoVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of this IGMP mrouter."
::= { igmpMrtrInfoEntry 4}
igmpMrtrInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this mrouter."
::= { igmpMrtrInfoEntry 5 }
igmpMrtrInfoMrt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Query Response time of this IGMP mrouter."
::= { igmpMrtrInfoEntry 6 }
-- RIP Information
rip2GeneralInfo OBJECT IDENTIFIER ::= { rip2Info 1 }
ripInfoState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP global state."
::= { rip2GeneralInfo 1 }
ripInfoUpdatePeriod OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Update Period in seconds."
::= { rip2GeneralInfo 2 }
rip2InfoIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipInfoIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information table of RIP."
::= { rip2Info 2 }
ripInfoIntfEntry OBJECT-TYPE
SYNTAX RipInfoIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about RIP on IP interface."
INDEX { ripInfoIntfIndex }
::= { rip2InfoIntfTable 1 }
RipInfoIntfEntry ::= SEQUENCE {
ripInfoIntfIndex Integer32,
ripInfoIntfVersion INTEGER,
ripInfoIntfAddress IpAddress,
ripInfoIntfState INTEGER,
ripInfoIntfListen INTEGER,
ripInfoIntfTrigUpdate INTEGER,
ripInfoIntfMcastUpdate INTEGER,
ripInfoIntfPoisonReverse INTEGER,
ripInfoIntfSupply INTEGER,
ripInfoIntfMetric INTEGER,
ripInfoIntfAuth INTEGER,
ripInfoIntfKey DisplayString,
ripInfoIntfDefault INTEGER
}
ripInfoIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the RIP information is related."
::= { ripInfoIntfEntry 1 }
ripInfoIntfVersion OBJECT-TYPE
SYNTAX INTEGER {
ripVersion1(1),
ripVersion2(2),
ripVersionBoth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP version."
::= { ripInfoIntfEntry 2 }
ripInfoIntfAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface address."
::= { ripInfoIntfEntry 3 }
ripInfoIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of RIP protocol."
::= { ripInfoIntfEntry 4 }
ripInfoIntfListen OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of listening to route updates."
::= { ripInfoIntfEntry 5 }
ripInfoIntfTrigUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of triggered updates."
::= { ripInfoIntfEntry 6 }
ripInfoIntfMcastUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of multicast updates."
::= { ripInfoIntfEntry 7 }
ripInfoIntfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of RIP poison reverse."
::= { ripInfoIntfEntry 8 }
ripInfoIntfSupply OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of supplying route updates."
::= { ripInfoIntfEntry 9 }
ripInfoIntfMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP route metric for this interface."
::= { ripInfoIntfEntry 10 }
ripInfoIntfAuth OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Authentication used on this interface."
::= { ripInfoIntfEntry 11 }
ripInfoIntfKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP update authentication password."
::= { ripInfoIntfEntry 12 }
ripInfoIntfDefault OBJECT-TYPE
SYNTAX INTEGER {
both(1),
listen(2),
supply(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies what RIP does with default routes."
::= { ripInfoIntfEntry 13 }
-- IP Interface Information
ipInfoRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Router ID information."
::= { ipInfo 1 }
ipIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP interface information."
::= { ipInfo 2 }
intfInfoEntry OBJECT-TYPE
SYNTAX IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in IP interface information table."
INDEX { intfInfoIndex }
::= { ipIntfInfoTable 1 }
IntfInfoEntry ::= SEQUENCE {
intfInfoIndex Integer32,
intfInfoAddr DisplayString,
intfInfoNetMask DisplayString,
intfInfoBcastAddr DisplayString,
intfInfoVlan Integer32,
intfInfoStatus INTEGER
}
intfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the information is related."
::= { intfInfoEntry 1 }
intfInfoAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { intfInfoEntry 2 }
intfInfoNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { intfInfoEntry 3 }
intfInfoBcastAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The broadcast address of the interface."
::= { intfInfoEntry 4 }
intfInfoVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number for this interface."
::= { intfInfoEntry 5 }
intfInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the interface."
::= { intfInfoEntry 6 }
-- IP Gateway Information
gatewayInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GatewayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information for the default gateways."
::= { ipInfo 3 }
gatewayInfoEntry OBJECT-TYPE
SYNTAX GatewayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the gateway information table"
INDEX { gatewayInfoIndex }
::= { gatewayInfoTable 1 }
GatewayInfoEntry ::= SEQUENCE {
gatewayInfoIndex Integer32,
gatewayInfoAddr IpAddress,
gatewayInfoVlan Integer32,
gatewayInfoStatus INTEGER
}
gatewayInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { gatewayInfoEntry 1}
gatewayInfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { gatewayInfoEntry 2 }
gatewayInfoVlan OBJECT-TYPE
SYNTAX Integer32 (0..4090)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number for this gateway (0 for any)."
::= { gatewayInfoEntry 3 }
gatewayInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
failed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the default gateway."
::= { gatewayInfoEntry 4 }
ipInfoBootpRelayState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of BOOTP relay."
::= { ipInfo 4 }
ipInfoBootpRelayAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of BOOTP server."
::= { ipInfo 5 }
ipInfoBootpRelayAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of second BOOTP server."
::= { ipInfo 6 }
ipInfoFwdState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipInfo 7 }
ipInfoFwdDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of forwarding directed broadcasts."
::= { ipInfo 8 }
ipInfoNwfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpInfoNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP network filter information."
::= { ipInfo 9 }
ipInfoNwfEntry OBJECT-TYPE
SYNTAX IpInfoNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IP network filter information table."
INDEX { ipInfoNwfIndex }
::= { ipInfoNwfTable 1 }
IpInfoNwfEntry ::= SEQUENCE {
ipInfoNwfIndex Integer32,
ipInfoNwfAddr IpAddress,
ipInfoNwfMask IpAddress,
ipInfoNwfState INTEGER
}
ipInfoNwfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netowrk filter number for which the NWF is related."
::= { ipInfoNwfEntry 1}
ipInfoNwfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the network filter."
::= { ipInfoNwfEntry 2 }
ipInfoNwfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the network filter."
::= { ipInfoNwfEntry 3 }
ipInfoNwfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the network filter."
::= { ipInfoNwfEntry 4 }
-- IP Route Map Information
ipInfoRmapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpInfoRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map information."
::= { ipInfo 10 }
ipInfoRmapEntry OBJECT-TYPE
SYNTAX IpInfoRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipInfoRmapIndex }
::= { ipInfoRmapTable 1 }
IpInfoRmapEntry ::= SEQUENCE {
ipInfoRmapIndex Integer32,
ipInfoRmapLp Unsigned32,
ipInfoRmapMetric Unsigned32,
ipInfoRmapPrec INTEGER,
ipInfoRmapWeight INTEGER,
ipInfoRmapState INTEGER,
ipInfoRmapAp DisplayString,
ipInfoRmapMetricType INTEGER
}
ipInfoRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipInfoRmapEntry 1}
ipInfoRmapLp OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local-preference of the route map. 4294967295 means none"
::= { ipInfoRmapEntry 2 }
ipInfoRmapMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of the route map. 4294967295 means none"
::= { ipInfoRmapEntry 3 }
ipInfoRmapPrec OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The precedence of the route map."
::= { ipInfoRmapEntry 4 }
ipInfoRmapWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The weight of the route map. 65535 means none"
::= { ipInfoRmapEntry 5 }
ipInfoRmapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the route map."
::= { ipInfoRmapEntry 6 }
ipInfoRmapAp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The as-path prepend of the matched route. Up to 3 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>]"
::= { ipInfoRmapEntry 7 }
ipInfoRmapMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF metric-type of the matched route."
::= { ipInfoRmapEntry 8 }
-- IP OSPF Information
ipOspfInfo OBJECT IDENTIFIER
::= { ipInfo 11 }
ipOspfInfoState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF global state."
::= { ipOspfInfo 1 }
ipOspfInfoDefaultRouteMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned."
::= { ipOspfInfo 2 }
ipOspfInfoDefaultRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type to be assigned."
::= { ipOspfInfo 3 }
ipOspfInfoRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ipOspfInfo 4 }
ipOspfInfoLsdbLimit OBJECT-TYPE
SYNTAX INTEGER (0..2000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSDB limit for external LSA."
::= { ipOspfInfo 5 }
-- IP OSPF Area Information
ipOspfAreaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpOspfAreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Information."
::= { ipOspfInfo 6 }
ipOspfAreaInfoEntry OBJECT-TYPE
SYNTAX IpOspfAreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF area."
INDEX { ipOspfAreaInfoIndex, ipOspfAreaInfoId }
::= { ipOspfAreaInfoTable 1 }
IpOspfAreaInfoEntry ::= SEQUENCE {
ipOspfAreaInfoIndex Integer32,
ipOspfAreaInfoId IpAddress,
ipOspfAreaInfoSpfInterval INTEGER,
ipOspfAreaInfoAuthType INTEGER,
ipOspfAreaInfoType INTEGER,
ipOspfAreaInfoMetric INTEGER,
ipOspfAreaInfoStatus INTEGER
}
ipOspfAreaInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF area number for which the OSPF area table is related."
::= { ipOspfAreaInfoEntry 1 }
ipOspfAreaInfoId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF area."
::= { ipOspfAreaInfoEntry 2 }
ipOspfAreaInfoSpfInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF interval for the OSPF area."
::= { ipOspfAreaInfoEntry 3 }
ipOspfAreaInfoAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication."
::= { ipOspfAreaInfoEntry 4 }
ipOspfAreaInfoType OBJECT-TYPE
SYNTAX INTEGER {
transit(0),
stub(1),
nssa(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Area.
transit(0)
stub(1)
nssa(2)"
::= { ipOspfAreaInfoEntry 5 }
ipOspfAreaInfoMetric OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Metric (1-65535)"
::= { ipOspfAreaInfoEntry 6 }
ipOspfAreaInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ipOspfAreaInfoEntry 7 }
-- IP OSPF Range Information
ipOspfRangeInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpOspfRangeInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF summary range information."
::= { ipOspfInfo 7 }
ipOspfRangeInfoEntry OBJECT-TYPE
SYNTAX IpOspfRangeInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF summary range."
INDEX { ipOspfRangeInfoIndex }
::= { ipOspfRangeInfoTable 1 }
IpOspfRangeInfoEntry ::= SEQUENCE {
ipOspfRangeInfoIndex Integer32,
ipOspfRangeInfoAddr IpAddress,
ipOspfRangeInfoMask IpAddress,
ipOspfRangeInfoAreaIndex Integer32,
ipOspfRangeInfoHideState INTEGER,
ipOspfRangeInfoState INTEGER
}
ipOspfRangeInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPF summary range table is related."
::= { ipOspfRangeInfoEntry 1}
ipOspfRangeInfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the range."
::= { ipOspfRangeInfoEntry 2 }
ipOspfRangeInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask of the range."
::= { ipOspfRangeInfoEntry 3 }
ipOspfRangeInfoAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ipOspfRangeInfoEntry 4 }
ipOspfRangeInfoHideState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the hide range."
::= { ipOspfRangeInfoEntry 5 }
ipOspfRangeInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the range."
::= { ipOspfRangeInfoEntry 6 }
-- IP OSPF Interface Information
ipOspfIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpOspfIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Information."
::= { ipOspfInfo 8 }
ipOspfIntfInfoEntry OBJECT-TYPE
SYNTAX IpOspfIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF Interface."
INDEX { ipOspfIntfInfoIndex }
::= { ipOspfIntfInfoTable 1 }
IpOspfIntfInfoEntry ::= SEQUENCE {
ipOspfIntfInfoIndex Integer32,
ipOspfIntfInfoId IpAddress,
ipOspfIntfInfoArea INTEGER,
ipOspfIntfInfoMdkey INTEGER,
ipOspfIntfInfoCost INTEGER,
ipOspfIntfInfoPrio INTEGER,
ipOspfIntfInfoHello INTEGER,
ipOspfIntfInfoDead INTEGER,
ipOspfIntfInfoTrans INTEGER,
ipOspfIntfInfoRetra INTEGER,
ipOspfIntfInfoAuthKey DisplayString,
ipOspfIntfInfoStatus INTEGER
}
ipOspfIntfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface number for which the OSPF Interface table is related."
::= { ipOspfIntfInfoEntry 1}
ipOspfIntfInfoId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF interface."
::= { ipOspfIntfInfoEntry 2 }
ipOspfIntfInfoArea OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the interface belongs"
::= { ipOspfIntfInfoEntry 3 }
ipOspfIntfInfoMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 key for the OSPF interface
0 (none) no MD5 authentication."
::= { ipOspfIntfInfoEntry 4 }
ipOspfIntfInfoCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface cost"
::= { ipOspfIntfInfoEntry 5 }
ipOspfIntfInfoPrio OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ipOspfIntfInfoEntry 6 }
ipOspfIntfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ipOspfIntfInfoEntry 7 }
ipOspfIntfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ipOspfIntfInfoEntry 8 }
ipOspfIntfInfoTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transit delay"
::= { ipOspfIntfInfoEntry 9 }
ipOspfIntfInfoRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ipOspfIntfInfoEntry 10 }
ipOspfIntfInfoAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key"
::= { ipOspfIntfInfoEntry 11 }
ipOspfIntfInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the interface
disabled(0),
enabled(1)"
::= { ipOspfIntfInfoEntry 12 }
-- IP OSPF Virtual Link Information
ipOspfVirtIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpOspfVirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Virtual Interface Information."
::= { ipOspfInfo 9 }
ipOspfVirtIntfInfoEntry OBJECT-TYPE
SYNTAX IpOspfVirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF virtual Interface."
INDEX { ipOspfVirtIntfInfoIndex }
::= { ipOspfVirtIntfInfoTable 1 }
IpOspfVirtIntfInfoEntry ::= SEQUENCE {
ipOspfVirtIntfInfoIndex Integer32,
ipOspfVirtIntfInfoAreaId INTEGER,
ipOspfVirtIntfInfoNbr IpAddress,
ipOspfVirtIntfInfoMdkey INTEGER,
ipOspfVirtIntfInfoHello INTEGER,
ipOspfVirtIntfInfoDead INTEGER,
ipOspfVirtIntfInfoTrans INTEGER,
ipOspfVirtIntfInfoRetra INTEGER,
ipOspfVirtIntfInfoAuthKey DisplayString,
ipOspfVirtIntfInfoStatus INTEGER
}
ipOspfVirtIntfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related."
::= { ipOspfVirtIntfInfoEntry 1}
ipOspfVirtIntfInfoAreaId OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF area to which this virtual interface
belongs."
::= { ipOspfVirtIntfInfoEntry 2 }
ipOspfVirtIntfInfoNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF neighbor for this virtual interface."
::= { ipOspfVirtIntfInfoEntry 3 }
ipOspfVirtIntfInfoMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication."
::= { ipOspfVirtIntfInfoEntry 4 }
ipOspfVirtIntfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ipOspfVirtIntfInfoEntry 5 }
ipOspfVirtIntfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ipOspfVirtIntfInfoEntry 6 }
ipOspfVirtIntfInfoTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transit delay"
::= { ipOspfVirtIntfInfoEntry 7 }
ipOspfVirtIntfInfoRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ipOspfVirtIntfInfoEntry 8 }
ipOspfVirtIntfInfoAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key"
::= { ipOspfVirtIntfInfoEntry 9 }
ipOspfVirtIntfInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1)"
::= { ipOspfVirtIntfInfoEntry 10 }
--IP OSPF Host Information
ipOspfHostInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpOspfHostInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Host Information."
::= { ipOspfInfo 10 }
ipOspfHostInfoEntry OBJECT-TYPE
SYNTAX IpOspfHostInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF host."
INDEX { ipOspfHostInfoIndex, ipOspfHostInfoIpAddr }
::= { ipOspfHostInfoTable 1 }
IpOspfHostInfoEntry ::= SEQUENCE {
ipOspfHostInfoIndex Integer32,
ipOspfHostInfoIpAddr IpAddress,
ipOspfHostInfoAreaIndex Integer32,
ipOspfHostInfoCost Integer32,
ipOspfHostInfoState INTEGER
}
ipOspfHostInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF host number for which the OSPF host table is related."
::= { ipOspfHostInfoEntry 1}
ipOspfHostInfoIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF host."
::= { ipOspfHostInfoEntry 2 }
ipOspfHostInfoAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ipOspfHostInfoEntry 3 }
ipOspfHostInfoCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the corresponding host."
::= { ipOspfHostInfoEntry 4 }
ipOspfHostInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable an OSPF Host"
::= { ipOspfHostInfoEntry 5 }
ipOspfRedistributeInfo OBJECT IDENTIFIER ::= { ipOspfInfo 11 }
ipOspfRedistributeStaticInfo OBJECT IDENTIFIER
::= { ipOspfRedistributeInfo 1 }
ipOspfRedistributeStaticInfoMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned to static routes.
A value of 0 indicates none."
::= { ipOspfRedistributeStaticInfo 1 }
ipOspfRedistributeStaticInfoMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for static routes."
::= { ipOspfRedistributeStaticInfo 2 }
ipOspfRedistributeStaticInfoOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ipOspfRedistributeStaticInfo 3 }
ipOspfRedistributeFixedInfo OBJECT IDENTIFIER
::= { ipOspfRedistributeInfo 2 }
ipOspfRedistributeFixedInfoMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for fixed routes. A value of 0 indicates none"
::= { ipOspfRedistributeFixedInfo 1 }
ipOspfRedistributeFixedInfoMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for fixed routes."
::= { ipOspfRedistributeFixedInfo 2 }
ipOspfRedistributeFixedInfoOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ipOspfRedistributeFixedInfo 3 }
ipOspfRedistributeRipInfo OBJECT IDENTIFIER
::= { ipOspfRedistributeInfo 3 }
ipOspfRedistributeRipInfoMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ipOspfRedistributeRipInfo 1 }
ipOspfRedistributeRipInfoMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for RIP routes."
::= { ipOspfRedistributeRipInfo 2 }
ipOspfRedistributeRipInfoOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ipOspfRedistributeRipInfo 3 }
ipOspfMd5keyInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpOspfMd5keyInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF MD5 keys Information."
::= { ipOspfInfo 12 }
ipOspfMd5keyInfoEntry OBJECT-TYPE
SYNTAX IpOspfMd5keyInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF MD keys table."
INDEX { ipOspfMd5keyInfoIndex }
::= { ipOspfMd5keyInfoTable 1 }
IpOspfMd5keyInfoEntry ::= SEQUENCE {
ipOspfMd5keyInfoIndex Integer32,
ipOspfMd5keyInfoKey DisplayString
}
ipOspfMd5keyInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF MD5 Key number for which the OSPF MdKey table is related."
::= { ipOspfMd5keyInfoEntry 1}
ipOspfMd5keyInfoKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The character string representing the MD5 Key."
::= { ipOspfMd5keyInfoEntry 2 }
-- VRRP Information
vrrpInfoVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpInfoVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual router run-time information."
::= { vrrpInfo 1 }
vrrpInfoVirtRtrTableEntry OBJECT-TYPE
SYNTAX VrrpInfoVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The run-time information about a VRRP virtual router."
INDEX { vrrpInfoVirtRtrIndex }
::= { vrrpInfoVirtRtrTable 1 }
VrrpInfoVirtRtrTableEntry ::= SEQUENCE {
vrrpInfoVirtRtrIndex Integer32,
vrrpInfoVirtRtrConfig INTEGER,
vrrpInfoVirtRtrID INTEGER,
vrrpInfoVirtRtrAddr IpAddress,
vrrpInfoVirtRtrIfIndex Integer32,
vrrpInfoVirtRtrOwnership INTEGER,
vrrpInfoVirtRtrPriority INTEGER,
vrrpInfoVirtRtrState INTEGER
}
vrrpInfoVirtRtrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router index."
::= { vrrpInfoVirtRtrTableEntry 1 }
vrrpInfoVirtRtrConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the VRRP virtual router."
::= { vrrpInfoVirtRtrTableEntry 2 }
vrrpInfoVirtRtrID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpInfoVirtRtrTableEntry 3 }
vrrpInfoVirtRtrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router IP address."
::= { vrrpInfoVirtRtrTableEntry 4 }
vrrpInfoVirtRtrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpInfoVirtRtrTableEntry 5 }
vrrpInfoVirtRtrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual routers."
::= { vrrpInfoVirtRtrTableEntry 6 }
vrrpInfoVirtRtrState OBJECT-TYPE
SYNTAX INTEGER {
init(1),
master(2),
backup(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router state."
::= { vrrpInfoVirtRtrTableEntry 7 }
vrrpInfoVirtRtrOwnership OBJECT-TYPE
SYNTAX INTEGER {
owner(1),
renter(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router ownership status."
::= { vrrpInfoVirtRtrTableEntry 8 }
-- Ospf Information
ospfGeneralInfo OBJECT IDENTIFIER ::= { ospfInfo 1 }
ospfVersion OBJECT-TYPE
SYNTAX INTEGER {
ospfVersion1(1),
ospfVersion2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF version."
::= { ospfGeneralInfo 1 }
ospfRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ospfGeneralInfo 2 }
ospfStartTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when ospf has been started."
::= { ospfGeneralInfo 3 }
ospfProcessUptime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since ospf has been started."
::= { ospfGeneralInfo 4 }
ospfLsTypesSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State Types that are supported."
::= { ospfGeneralInfo 5 }
ospfAreaBorderRouter OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area Border Router Role."
::= { ospfGeneralInfo 6 }
ospfAreaBoundaryRouter OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area Boundary Router Role."
::= { ospfGeneralInfo 7 }
ospfExternalLsa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external LSAs."
::= { ospfGeneralInfo 8 }
ospfIntfCountForRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interfaces for this router."
::= { ospfGeneralInfo 9 }
ospfVlinkCountForRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of virtual links for this router."
::= { ospfGeneralInfo 10 }
ospfNewLsaReceived OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of new LSAs reveived."
::= { ospfGeneralInfo 11 }
ospfTotalLsaOriginated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LSAs originated."
::= { ospfGeneralInfo 12 }
ospfTotalNumberOfLsdbEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of entries in the Link State Database."
::= { ospfGeneralInfo 13 }
ospfTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF neighbours."
::= { ospfGeneralInfo 14 }
ospfNbrInInitState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbours in the initial state of exchange."
::= { ospfGeneralInfo 15 }
ospfNbrInExchState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbours in the exchange state."
::= { ospfGeneralInfo 16 }
ospfNbrInFullState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbours in the Full state of exchange."
::= { ospfGeneralInfo 17 }
ospfTotalAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of areas."
::= { ospfGeneralInfo 18 }
ospfTotalTransitAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of Transit areas."
::= { ospfGeneralInfo 19 }
ospfTotalNssaAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of NSSA areas."
::= { ospfGeneralInfo 20 }
ospfTotalStubAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of STUB areas."
::= { ospfGeneralInfo 21 }
ospfAreaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area information."
::= { ospfInfo 2 }
ospfAreaInfoEntry OBJECT-TYPE
SYNTAX OspfAreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF area."
INDEX { ospfAreaInfoIndex }
::= { ospfAreaInfoTable 1 }
OspfAreaInfoEntry ::= SEQUENCE {
ospfAreaInfoIndex Integer32,
ospfAreaInfoId IpAddress,
ospfAreaInfoStatus INTEGER,
ospfTotalNumberOfInterfaces Integer32,
ospfNumberOfInterfacesUp Integer32,
ospfAreaInfoAuthType INTEGER,
ospfAreaInfoSPF Integer32,
ospfNumberOfLsdbEntries Integer32,
ospfAreaInfoAreaBorderRouter Integer32,
ospfAreaInfoASBoundaryRouter Integer32,
ospfAreaInfoTotalNeighbours Integer32,
ospfAreaInfoNeighborsINITstate Integer32,
ospfAreaInfoNeighborsEXCHstate Integer32,
ospfAreaInfoNeighborsFULLstate Integer32,
ospfAreaInfoLsTypesAccepted DisplayString
}
ospfAreaInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF area number for which the OSPF info table is related."
::= { ospfAreaInfoEntry 1 }
ospfAreaInfoId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the OSPF area."
::= { ospfAreaInfoEntry 2 }
ospfAreaInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area Status:
disabled(0), enabled(1)."
::= { ospfAreaInfoEntry 3 }
ospfTotalNumberOfInterfaces OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces for this OSPF area."
::= { ospfAreaInfoEntry 4 }
ospfNumberOfInterfacesUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interfaces UP in area."
::= { ospfAreaInfoEntry 5 }
ospfAreaInfoAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used:
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication."
::= { ospfAreaInfoEntry 6 }
ospfAreaInfoSPF OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times SPF ran."
::= { ospfAreaInfoEntry 7 }
ospfNumberOfLsdbEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link State Database entries for this OSPF area."
::= { ospfAreaInfoEntry 8 }
ospfAreaInfoAreaBorderRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Area Border Router count."
::= { ospfAreaInfoEntry 9 }
ospfAreaInfoASBoundaryRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS Boundary Router count."
::= { ospfAreaInfoEntry 10 }
ospfAreaInfoTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF neighbors."
::= { ospfAreaInfoEntry 11 }
ospfAreaInfoNeighborsINITstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in INIT state."
::= { ospfAreaInfoEntry 12 }
ospfAreaInfoNeighborsEXCHstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in EXCH state."
::= { ospfAreaInfoEntry 13 }
ospfAreaInfoNeighborsFULLstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in FULL state."
::= { ospfAreaInfoEntry 14 }
ospfAreaInfoLsTypesAccepted OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LS types accepted by this area."
::= { ospfAreaInfoEntry 15 }
ospfIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface information."
::= { ospfInfo 3 }
ospfIntfInfoEntry OBJECT-TYPE
SYNTAX OspfIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF interface."
INDEX { ospfIfInfoIndex }
::= { ospfIntfInfoTable 1 }
OspfIntfInfoEntry ::= SEQUENCE {
ospfIfInfoIndex Integer32,
ospfIfInfoIpAddress IpAddress,
ospfIfInfoArea INTEGER,
ospfIfInfoAdminStatus INTEGER,
ospfIfInfoRouterID IpAddress,
ospfIfInfoState INTEGER,
ospfIfInfoPriority INTEGER,
ospfIfInfoDesignatedRouterID IpAddress,
ospfIfInfoDesignatedRouterIpAddress IpAddress,
ospfIfInfoBackupDesignatedRouterID IpAddress,
ospfIfInfoBackupDesignatedRouterIpAddress IpAddress,
ospfIfInfoHello INTEGER,
ospfIfInfoDead INTEGER,
ospfIfInfoWait Integer32,
ospfIfInfoRetransmit INTEGER,
ospfIfInfoTransitDelay INTEGER,
ospfIfInfoTotalNeighbours Integer32,
ospfIfInfoEvents Integer32,
ospfIfInfoAuthType INTEGER
}
ospfIfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF interface number for which the OSPF info table is related."
::= { ospfIntfInfoEntry 1 }
ospfIfInfoIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the OSPF interface."
::= { ospfIntfInfoEntry 2 }
ospfIfInfoArea OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the interface belongs."
::= { ospfIntfInfoEntry 3 }
ospfIfInfoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Admin Status of the interface:
down(0), up(1)."
::= { ospfIntfInfoEntry 4 }
ospfIfInfoRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ospfIntfInfoEntry 5 }
ospfIfInfoState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
loopback(1),
waiting(2),
ptop(3),
dr(4),
backupdr(5),
drother(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6)."
::= { ospfIntfInfoEntry 6 }
ospfIfInfoPriority OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ospfIntfInfoEntry 7 }
ospfIfInfoDesignatedRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Designated Router ID for this OSPF interface."
::= { ospfIntfInfoEntry 8 }
ospfIfInfoDesignatedRouterIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Designated Router IP Address for this OSPF interface."
::= { ospfIntfInfoEntry 9 }
ospfIfInfoBackupDesignatedRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Backup Designated Router ID for this OSPF
interface."
::= { ospfIntfInfoEntry 10 }
ospfIfInfoBackupDesignatedRouterIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Backup Designated Router Ip Address for this OSPF
interface."
::= { ospfIntfInfoEntry 11 }
ospfIfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hello timer for this OSPF interface."
::= { ospfIntfInfoEntry 12 }
ospfIfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dead timer for this OSPF interface."
::= { ospfIntfInfoEntry 13 }
ospfIfInfoWait OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Wait interval for this OSPF interface."
::= { ospfIntfInfoEntry 14 }
ospfIfInfoRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The retransmit interval for this OSPF interface."
::= { ospfIntfInfoEntry 15 }
ospfIfInfoTransitDelay OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit delay for this OSPF interface."
::= { ospfIntfInfoEntry 16 }
ospfIfInfoTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours for this OSPF interface."
::= { ospfIntfInfoEntry 17 }
ospfIfInfoEvents OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events for this OSPF interface."
::= { ospfIntfInfoEntry 18 }
ospfIfInfoAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication."
::= { ospfIntfInfoEntry 19 }
-- OSPF Interface/Virtual Interface Table
ospfVirtIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfVirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF virtual interfaces information."
::= { ospfInfo 4 }
ospfVirtIntfInfoEntry OBJECT-TYPE
SYNTAX OspfVirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF virtual interface."
INDEX { ospfVirtIntfInfoIndex }
::= { ospfVirtIntfInfoTable 1 }
OspfVirtIntfInfoEntry ::= SEQUENCE {
ospfVirtIntfInfoIndex Integer32,
ospfVirtIntfInfoIpAddr IpAddress,
ospfVirtIntfInfoArea INTEGER,
ospfVirtIntfInfoRouterId IpAddress,
ospfVirtIntfInfoState INTEGER,
ospfVirtIntfInfoCost INTEGER,
ospfVirtIntfInfoTrans INTEGER,
ospfVirtIntfInfoHello INTEGER,
ospfVirtIntfInfoDead INTEGER,
ospfVirtIntfInfoWait INTEGER,
ospfVirtIntfInfoRetra INTEGER,
ospfVirtIntfInfoAuth DisplayString,
ospfVirtIntfInfoEvents INTEGER,
ospfVirtIntfInfoNbr IpAddress,
ospfVirtIntfInfoNbrState INTEGER,
ospfVirtIntfInfoAreaId IpAddress
}
ospfVirtIntfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Virtual Interface number for which this table is
related."
::= { ospfVirtIntfInfoEntry 1 }
ospfVirtIntfInfoIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of this virtual interface."
::= { ospfVirtIntfInfoEntry 2 }
ospfVirtIntfInfoArea OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF area to which this virtual interface
belongs."
::= { ospfVirtIntfInfoEntry 3 }
ospfVirtIntfInfoRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID."
::= { ospfVirtIntfInfoEntry 4 }
ospfVirtIntfInfoState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State
disabled(0),
enabled(1)"
::= { ospfVirtIntfInfoEntry 5 }
ospfVirtIntfInfoCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the virtual interface."
::= { ospfVirtIntfInfoEntry 6 }
ospfVirtIntfInfoTrans OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit delay for the virtual interface."
::= { ospfVirtIntfInfoEntry 7 }
ospfVirtIntfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval."
::= { ospfVirtIntfInfoEntry 8 }
ospfVirtIntfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval."
::= { ospfVirtIntfInfoEntry 9 }
ospfVirtIntfInfoWait OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wait interval."
::= { ospfVirtIntfInfoEntry 10 }
ospfVirtIntfInfoRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval."
::= { ospfVirtIntfInfoEntry 11 }
ospfVirtIntfInfoAuth OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication."
::= { ospfVirtIntfInfoEntry 12 }
ospfVirtIntfInfoEvents OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Events."
::= { ospfVirtIntfInfoEntry 13 }
ospfVirtIntfInfoNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF neighbor for this virtual interface."
::= { ospfVirtIntfInfoEntry 14 }
ospfVirtIntfInfoNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(0),attempt(1),init(2),twoway(3),
exstart(4),exchange(5),loading(6),full(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State
down(0),attempt(1),init(2),2 way(3),
exstart(4),exchange(5),loading(6),full(7)"
::= { ospfVirtIntfInfoEntry 15 }
ospfVirtIntfInfoAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Thea AreaId of the virtual interface."
::= { ospfVirtIntfInfoEntry 16 }
-- OSPF Interface/Nbr Info Table
ospfIfNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Neighbor information."
::= { ospfInfo 5 }
ospfIfNbrEntry OBJECT-TYPE
SYNTAX OspfIfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF interface, neighbor pair."
INDEX { ospfIfNbrIntfIndex, ospfIfNbrIpAddr }
::= { ospfIfNbrTable 1 }
OspfIfNbrEntry ::= SEQUENCE {
ospfIfNbrIntfIndex Integer32,
ospfIfNbrIpAddr IpAddress,
ospfIfNbrPriority Integer32,
ospfIfNbrState INTEGER,
ospfIfNbrDesignatedRtr IpAddress,
ospfIfNbrBackupDesignatedRtr IpAddress,
ospfIfNbrIpAddress IpAddress
}
ospfIfNbrIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface number for which this Interface/Nbr table is
related."
::= { ospfIfNbrEntry 1}
ospfIfNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Neighbor ID ."
::= { ospfIfNbrEntry 2 }
ospfIfNbrPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the OSPF neighbor."
::= { ospfIfNbrEntry 3 }
ospfIfNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoway(4),
exStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the OSPF neighbor."
::= { ospfIfNbrEntry 4 }
ospfIfNbrDesignatedRtr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the Designated Router for this OSPF Neighbor."
::= { ospfIfNbrEntry 5 }
ospfIfNbrBackupDesignatedRtr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the backup designated Router for this OSPF Neighbor."
::= { ospfIfNbrEntry 6 }
ospfIfNbrIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF Neighbor."
::= { ospfIfNbrEntry 7 }
-- OSPF Interface/Summary Ranges Table
ospfSumRangesInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfSumRangesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF summary ranges information."
::= { ospfInfo 6 }
ospfSumRangesInfoEntry OBJECT-TYPE
SYNTAX OspfSumRangesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Summary ranges information."
INDEX { ospfSumRangesInfoIndex }
::= { ospfSumRangesInfoTable 1 }
OspfSumRangesInfoEntry ::= SEQUENCE {
ospfSumRangesInfoIndex Integer32,
ospfSumRangesInfoArea INTEGER,
ospfSumRangesInfoNetwork IpAddress,
ospfSumRangesInfoMask IpAddress,
ospfSumRangesInfoAction INTEGER,
ospfSumRangesInfoListType INTEGER
}
ospfSumRangesInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF range index for which this table is
related."
::= { ospfSumRangesInfoEntry 1 }
ospfSumRangesInfoArea OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area."
::= { ospfSumRangesInfoEntry 2 }
ospfSumRangesInfoNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Network."
::= { ospfSumRangesInfoEntry 3 }
ospfSumRangesInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mask."
::= { ospfSumRangesInfoEntry 4 }
ospfSumRangesInfoAction OBJECT-TYPE
SYNTAX INTEGER {
propagate(0),
hide(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action
propagate(0),
hide(1)"
::= { ospfSumRangesInfoEntry 5 }
ospfSumRangesInfoListType OBJECT-TYPE
SYNTAX INTEGER {
non-nssa(0),
nssa(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Summary address list
Non-NSSA(0),
NSSA(1)"
::= { ospfSumRangesInfoEntry 6 }
-- OSPF Interface/Routes Table
ospfRoutesInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfRoutesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF routes information."
::= { ospfInfo 7 }
ospfRoutesInfoEntry OBJECT-TYPE
SYNTAX OspfRoutesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF routes information."
INDEX { ospfRoutesInfoIndex }
::= { ospfRoutesInfoTable 1 }
OspfRoutesInfoEntry ::= SEQUENCE {
ospfRoutesInfoIndex Integer32,
ospfRoutesInfoDestination IpAddress,
ospfRoutesInfoMask IpAddress,
ospfRoutesInfoVia IpAddress,
ospfRoutesInfoType DisplayString
}
ospfRoutesInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF route table entry index for which
this table is related."
::= { ospfRoutesInfoEntry 1 }
ospfRoutesInfoDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination."
::= { ospfRoutesInfoEntry 2 }
ospfRoutesInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mask."
::= { ospfRoutesInfoEntry 3 }
ospfRoutesInfoVia OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next hop."
::= { ospfRoutesInfoEntry 4 }
ospfRoutesInfoType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Route type. Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - best"
::= { ospfRoutesInfoEntry 5 }
-- OSPF Link State Database
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
-- The Area ID, in OSPF, has the same format as an IP Address,
-- but has the function of defining a summarization point for
-- Link State Advertisements.
-- The Router ID, in OSPF, has the same format as an IP Address,
-- but identifies the router independent of its IP Address.
ospfLsdbInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's Link State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfInfo 8 }
ospfLsdbInfoEntry OBJECT-TYPE
SYNTAX OspfLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link State Advertisement."
INDEX { ospfLsdbInfoIndex }
::= { ospfLsdbInfoTable 1 }
OspfLsdbInfoEntry ::=
SEQUENCE {
ospfLsdbInfoIndex
Integer32,
ospfLsdbInfoAreaId
IpAddress,
ospfLsdbInfoType
INTEGER,
ospfLsdbInfoLsid
IpAddress,
ospfLsdbInfoRouterId
IpAddress,
ospfLsdbInfoSequence
OCTET STRING,
ospfLsdbInfoAge
Integer32,
ospfLsdbInfoChecksum
Integer32,
ospfLsdbInfoAdvertisement
OCTET STRING
}
ospfLsdbInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit index in the table."
REFERENCE
"Private MIBS"
::= { ospfLsdbInfoEntry 1 }
ospfLsdbInfoAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfLsdbInfoEntry 2 }
-- External Link State Advertisements are permitted
-- for backward compatibility, but should be displayed in
-- the ospfExtLsdbTable rather than here.
ospfLsdbInfoType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5), -- but see ospfExtLsdbTable
multicastLink (6),
nssaExternalLink (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { ospfLsdbInfoEntry 3 }
ospfLsdbInfoLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { ospfLsdbInfoEntry 4 }
ospfLsdbInfoRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfLsdbInfoEntry 5 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
-- Modified to OCTET STRING - for BLADE HARMONY
ospfLsdbInfoSequence OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfLsdbInfoEntry 6 }
ospfLsdbInfoAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfLsdbInfoEntry 7 }
ospfLsdbInfoChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfLsdbInfoEntry 8 }
ospfLsdbInfoAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(36))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfLsdbInfoEntry 9 }
-- SPF Link State Database, External
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
-- This table is identical to the OSPF LSDB Table in
-- format, but contains only External Link State
-- Advertisements. The purpose is to allow external
-- LSAs to be displayed once for the router rather
-- than once in each non-stub area.
ospfExtLsdbInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's Links State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfInfo 9 }
ospfExtLsdbInfoEntry OBJECT-TYPE
SYNTAX OspfExtLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link State Advertisement."
INDEX { ospfExtLsdbInfoIndex }
::= { ospfExtLsdbInfoTable 1 }
OspfExtLsdbInfoEntry ::=
SEQUENCE {
ospfExtLsdbInfoIndex
Integer32,
ospfExtLsdbInfoType
INTEGER,
ospfExtLsdbInfoLsid
IpAddress,
ospfExtLsdbInfoRouterId
IpAddress,
ospfExtLsdbInfoSequence
OCTET STRING,
ospfExtLsdbInfoAge
Integer32,
ospfExtLsdbInfoChecksum
Integer32,
ospfExtLsdbInfoAdvertisement
OCTET STRING
}
ospfExtLsdbInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit index in the table."
REFERENCE
"Private MIBS"
::= { ospfExtLsdbInfoEntry 1 }
ospfExtLsdbInfoType OBJECT-TYPE
SYNTAX INTEGER {
asExternalLink (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { ospfExtLsdbInfoEntry 2 }
ospfExtLsdbInfoLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { ospfExtLsdbInfoEntry 3 }
ospfExtLsdbInfoRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfExtLsdbInfoEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
-- Modified to OCTET STRING - for BLADE HARMONY
ospfExtLsdbInfoSequence OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfExtLsdbInfoEntry 5 }
ospfExtLsdbInfoAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfExtLsdbInfoEntry 6 }
ospfExtLsdbInfoChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfExtLsdbInfoEntry 7 }
ospfExtLsdbInfoAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(36))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfExtLsdbInfoEntry 8 }
vrrpOperVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpOperVirtRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table of virtual routers."
::= { vrrpOper 1 }
vrrpOperVirtRtrEntry OBJECT-TYPE
SYNTAX VrrpOperVirtRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the vrrpOperVirtRtrTable "
INDEX { vrrpOperVirtRtrIndex }
::= { vrrpOperVirtRtrTable 1 }
VrrpOperVirtRtrEntry ::= SEQUENCE {
vrrpOperVirtRtrIndex Integer32,
vrrpOperVirtRtrBackup INTEGER
}
vrrpOperVirtRtrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index for the VRRP virtual router."
::= { vrrpOperVirtRtrEntry 1 }
vrrpOperVirtRtrBackup OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
backup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to a value of 'backup(2)' it forces the specified
master virtual router into backup mode.
'ok(1)' is returned when the object os read."
::= { vrrpOperVirtRtrEntry 2 }
vrrpOperVirtRtrGroupBackup OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
backup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to a value of 'backup(2)' it forces the specified
master virtual router group into backup mode.
'ok(1)' is returned when the object os read."
::= { vrrpOper 2 }
-- ----------------------------------------------------------------------------
-- } INSERT: bt2Network
-- ----------------------------------------------------------------------------
bntTraps OBJECT IDENTIFIER
::= { hpSwitchBladeType4-Mgmt 7 }
-- ----------------------------------------------------------------------------
-- { INSERT: bt2trap
-- ----------------------------------------------------------------------------
-- SECTION 2: Temporary Object Definitions Used In Traps
bntSwTrapDisplayString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary string object used to store information being sent
in an BNT Switch trap."
::= { bntTraps 1000 }
-- SECTION 3: Trap Definitions
bntSwDefGwUp TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwDefGwUp trap signifies that the default
gateway is alive."
--#SEVERITY INFORMATIONAL
::= 2 -- 0x02
bntSwDefGwDown TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwDefGwDown trap signifies that the default
gateway is down."
--#SEVERITY INFORMATIONAL
::= 3 -- 0x03
bntSwDefGwInService TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwDefGwEnabled trap signifies that the default
gateway is up and in service."
--#SEVERITY INFORMATIONAL
::= 4 -- 0x04
bntSwDefGwNotInService TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwDefGwDisabled trap signifies that the default
gateway is alive but not in service."
--#SEVERITY INFORMATIONAL
::= 5 -- 0x05
bntSwLoginFailure TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwLoginFailure trap signifies that someone failed to
enter a valid username/password combination."
--#SEVERITY MAJOR
::= 19 -- 0x13
bntSwTempExceedThreshold TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits."
--#SEVERITY CRITICAL
::= 22 -- 0x16
bntSwApplyComplete TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwApplyComplete signifies that new configuration
has been applied."
--#SEVERITY INFORMATIONAL
::= 27 -- 0x1B
bntSwSaveComplete TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwApplyComplete signifies that new configuration
has been saved."
--#SEVERITY INFORMATIONAL
::= 28 -- 0x1C
bntSwFwDownloadSucess TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwFwDownloadSuccess signifies that firmware
has been downloaded to [image1|image2|boot image]."
--#SEVERITY INFORMATIONAL
::= 29 -- 0x1D
bntSwFwDownloadFailure TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwFwDownloadFailure signifies that firmware
downloaded failed to [image1|image2|boot image]."
--#SEVERITY MINOR
::= 30 -- 0x1E
bntSwTempReturnThreshold TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwTempReturnThreshold trap signifies that the
switch temperature has returned below maximum safety limits."
--#SEVERITY INFORMATIONAL
::= 31 -- 0x1F
bntSwUfdfoLtMFailure TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwUfdfoLtMFailure trap signifies that a LtM link is down."
--#SEVERITY MAJOR
::= 34 -- 0x22
bntSwUfdfoLtMUP TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwUfdfoLtMUP trap signifies that a LtM link is up."
--#SEVERITY INFORMATIONAL
::= 35 -- 0x23
bntSwUfdfoGlobalEna TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwUfdfoGlobalEna trap signifies that Global UFD is enabled."
--#SEVERITY INFORMATIONAL
::= 36 -- 0x24
bntSwUfdfoGlobalDis TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwUfdfoGlobalDis trap signifies that Global UFD is disabled."
--#SEVERITY INFORMATIONAL
::= 37 -- 0x25
bntSwUfdfoLtDAutoEna TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled."
--#SEVERITY INFORMATIONAL
::= 38 -- 0x26
bntSwUfdfoLtDAutoDis TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled."
--#SEVERITY INFORMATIONAL
::= 39 -- 0x27
bntSwStgNewRoot TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString, stgCurCfgIndex,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwStgNewRoot trap signifies that the bridge has become the new root of the STG."
--#SEVERITY INFORMATIONAL
::= 42 -- 0x2A
bntSwCistNewRoot TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwCistNewRoot trap signifies that the bridge has become the new root of the CIST."
--#SEVERITY INFORMATIONAL
::= 43 -- 0x2B
bntSwStgTopologyChanged TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString, stgCurCfgIndex,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwStgTopologyChanged trap signifies that there was a STG topology change."
--#SEVERITY INFORMATIONAL
::= 44 -- 0x2C
bntSwCistTopologyChanged TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A bntSwCistTopologyChanged trap signifies that there was a CIST topology change."
--#SEVERITY INFORMATIONAL
::= 45 -- 0x2D
bntSFPInserted TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString, ifIndex,
sysName, sysLocation, sysContact }
DESCRIPTION "A bntSFPInserted trap signifies that a SFP is inserted."
--#SEVERITY INFORMATIONAL
::= 51 -- 0x33
bntSFPRemoved TRAP-TYPE
ENTERPRISE bntTraps
VARIABLES { bntSwTrapDisplayString, ifIndex,
sysName, sysLocation, sysContact }
DESCRIPTION "A bntSFPRemoved trap signifies that a SFP is removed."
--#SEVERITY INFORMATIONAL
::= 52 -- 0x34
-- ----------------------------------------------------------------------------
-- } INSERT: bt2trap
-- ----------------------------------------------------------------------------
-------------------------------------------------------------------------------
-- HP Platform Common Private MIBs
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-- Feature Dependent Private MIBs
-------------------------------------------------------------------------------
acl OBJECT IDENTIFIER
::= { hpSwitchBladeType4-Mgmt 9 }
-- ----------------------------------------------------------------------------
-- { INSERT: bt2acl
-- ----------------------------------------------------------------------------
acConfig OBJECT IDENTIFIER ::= { acl 1 }
acList OBJECT IDENTIFIER ::= { acConfig 1 }
aclGroup OBJECT IDENTIFIER ::= { acConfig 3 }
aclCfg OBJECT IDENTIFIER ::= { acConfig 4 }
-- ---------------------------------------------------------- --
-- Access Control List (ACL) Configuration
-- ---------------------------------------------------------- --
aclCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL configuration."
::= { acList 1 }
aclCurCfgEntry OBJECT-TYPE
SYNTAX AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular ACL configuration entry."
INDEX { aclCurCfgIndex }
::= { aclCurCfgTable 1 }
AclCurCfgEntry ::= SEQUENCE {
aclCurCfgIndex Unsigned32,
aclCurCfgGroup Unsigned32,
aclCurCfgFilterAction INTEGER,
aclCurCfgFilterActionSetPrio INTEGER,
aclCurCfgEthFmt INTEGER,
aclCurCfgTagFmt INTEGER,
aclCurCfgIPFmt INTEGER,
aclCurCfgSrcMACAddress MacAddress,
aclCurCfgSrcMACMask MacAddress,
aclCurCfgDstMACAddress MacAddress,
aclCurCfgDstMACMask MacAddress,
aclCurCfgEthernetTypeName INTEGER,
aclCurCfgEthernetTypeValue INTEGER,
aclCurCfgVLanId INTEGER,
aclCurCfgVLanMask DisplayString,
aclCurCfg8021pPriority INTEGER,
aclCurCfgTypeOfService DisplayString,
aclCurCfgProtocol DisplayString,
aclCurCfgSrcIPAddress IpAddress,
aclCurCfgSrcIPMask IpAddress,
aclCurCfgDstIPAddress IpAddress,
aclCurCfgDstIPMask IpAddress,
aclCurCfgSrcPort INTEGER,
aclCurCfgSrcPortMask DisplayString,
aclCurCfgDstPort INTEGER,
aclCurCfgDstPortMask DisplayString,
aclCurCfgTCPFlags BITS,
aclCurCfgTCPFlagsMask BITS,
aclCurCfgEgressPorts OCTET STRING,
aclCurCfgStatistics INTEGER,
aclCurCfgMeterAction INTEGER,
aclCurCfgMeterEnable INTEGER,
aclCurCfgKbitsSec Unsigned32,
aclCurCfgKbitsBurst INTEGER,
aclCurCfgInprofUser INTEGER,
aclCurCfgInprofDscp INTEGER,
aclCurCfgInprofTos INTEGER,
aclCurCfgOutprofDscp INTEGER,
aclCurCfgInprofUserEnable INTEGER,
aclCurCfgInprofDscpEnable INTEGER,
aclCurCfgOutprofDscpEnable INTEGER
}
aclCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclCurCfgEntry 1 }
aclCurCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group."
::= { aclCurCfgEntry 3 }
aclCurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2),
setprio(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclCurCfgEntry 4 }
aclCurCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be used when the action to be performed is setprio
for this ACL entry."
::= { aclCurCfgEntry 5 }
aclCurCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3)
,ieee802dot3(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { aclCurCfgEntry 6 }
aclCurCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
any(2),
untagged(3),
tagged(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet tag format to be filtered."
::= { aclCurCfgEntry 7 }
aclCurCfgIPFmt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ipv4(2),
ipv6(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet IP format to be filtered."
::= { aclCurCfgEntry 8 }
aclCurCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address to be filtered."
::= { aclCurCfgEntry 9 }
aclCurCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcMACAddress for filtering."
::= { aclCurCfgEntry 10 }
aclCurCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination MAC address to be filtered."
::= { aclCurCfgEntry 11 }
aclCurCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstMACAddress for filtering."
::= { aclCurCfgEntry 12 }
aclCurCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered."
::= { aclCurCfgEntry 13 }
aclCurCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclCurCfgEntry 14 }
aclCurCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered."
::= { aclCurCfgEntry 15 }
aclCurCfgVLanMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgVLanId for filtering."
::= { aclCurCfgEntry 16 }
aclCurCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclCurCfgEntry 17 }
aclCurCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of service to be filtered."
::= { aclCurCfgEntry 18 }
aclCurCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol to be filtered."
::= { aclCurCfgEntry 19 }
aclCurCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address to be filtered."
::= { aclCurCfgEntry 20 }
aclCurCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcIPAddress for filtering."
::= { aclCurCfgEntry 21 }
aclCurCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address to be filtered."
::= { aclCurCfgEntry 22 }
aclCurCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstIPAddress for filtering."
::= { aclCurCfgEntry 23 }
aclCurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 24 }
aclCurCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgSrcPort for filtering."
::= { aclCurCfgEntry 25 }
aclCurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 26 }
aclCurCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgDstPort for filtering."
::= { aclCurCfgEntry 27 }
aclCurCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 28 }
aclCurCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 39 }
aclCurCfgEgressPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { aclCurCfgEntry 29 }
aclCurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclCurCfgEntry 30 }
aclCurCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter Action for this ACL."
::= { aclCurCfgEntry 41 }
aclCurCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter state for this ACL."
::= { aclCurCfgEntry 42 }
aclCurCfgKbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (64..10000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The commited rate of meter associated with this ACL entry."
::= { aclCurCfgEntry 43 }
aclCurCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maxmium burst sizeof meter associated with this ACL entry."
::= { aclCurCfgEntry 44 }
aclCurCfgInprofUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile user defined priority for this ACL."
::= { aclCurCfgEntry 45 }
aclCurCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { aclCurCfgEntry 46 }
aclCurCfgInprofTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To enable/disable setting in profile pkts based on TOS bits."
::= { aclCurCfgEntry 47 }
aclCurCfgOutprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set out profile pkts DSCP value."
::= { aclCurCfgEntry 48 }
aclCurCfgInprofUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile update method for this ACL."
::= { aclCurCfgEntry 49 }
aclCurCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL is enabled or not."
::= { aclCurCfgEntry 50 }
aclCurCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this ACL is enabled or not."
::= { aclCurCfgEntry 51 }
--
-- New ACL Configuration Table
--
aclNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL configuration."
::= { acList 2 }
aclNewCfgEntry OBJECT-TYPE
SYNTAX AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL configuration."
INDEX { aclNewCfgIndex }
::= { aclNewCfgTable 1 }
AclNewCfgEntry ::= SEQUENCE {
aclNewCfgIndex Unsigned32,
aclNewCfgGroup Unsigned32,
aclNewCfgFilterAction INTEGER,
aclNewCfgFilterActionSetPrio INTEGER,
aclNewCfgEthFmt INTEGER,
aclNewCfgTagFmt INTEGER,
aclNewCfgIPFmt INTEGER,
aclNewCfgSrcMACAddress MacAddress,
aclNewCfgSrcMACMask MacAddress,
aclNewCfgDstMACAddress MacAddress,
aclNewCfgDstMACMask MacAddress,
aclNewCfgEthernetTypeName INTEGER,
aclNewCfgEthernetTypeValue INTEGER,
aclNewCfgVLanId INTEGER,
aclNewCfgVLanMask DisplayString,
aclNewCfg8021pPriority INTEGER,
aclNewCfgTypeOfService DisplayString,
aclNewCfgProtocol DisplayString,
aclNewCfgSrcIPAddress IpAddress,
aclNewCfgSrcIPMask IpAddress,
aclNewCfgDstIPAddress IpAddress,
aclNewCfgDstIPMask IpAddress,
aclNewCfgSrcPort INTEGER,
aclNewCfgSrcPortMask DisplayString,
aclNewCfgDstPort INTEGER,
aclNewCfgDstPortMask DisplayString,
aclNewCfgTCPFlags BITS,
aclNewCfgTCPFlagsMask BITS,
aclNewCfgEgressPorts OCTET STRING,
aclNewCfgStatistics INTEGER,
aclNewCfgAddEgressPort INTEGER,
aclNewCfgRemoveEgressPort Unsigned32,
aclNewCfgDelete INTEGER,
aclNewCfgMeterAction INTEGER,
aclNewCfgMeterEnable INTEGER,
aclNewCfgKbitsSec Unsigned32,
aclNewCfgKbitsBurst INTEGER,
aclNewCfgInprofUser INTEGER,
aclNewCfgInprofDscp INTEGER,
aclNewCfgInprofTos INTEGER,
aclNewCfgOutprofDscp INTEGER,
aclNewCfgInprofUserEnable INTEGER,
aclNewCfgInprofDscpEnable INTEGER,
aclNewCfgOutprofDscpEnable INTEGER,
aclNewCfgReset INTEGER,
aclNewCfgEthernetReset INTEGER,
aclNewCfgIpv4Reset INTEGER,
aclNewCfgTcpudpReset INTEGER,
aclNewCfgMeterReset INTEGER,
aclNewCfgRemarkReset INTEGER,
aclNewCfgRemarkInprofReset INTEGER,
aclNewCfgRemarkOutprofReset INTEGER,
aclNewCfgPktfmtReset INTEGER
}
aclNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclNewCfgEntry 1 }
aclNewCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group."
::= { aclNewCfgEntry 3 }
aclNewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2),
setprio(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclNewCfgEntry 4 }
aclNewCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The COS queue to be used when the action for this ACL entry is
set to setprio."
::= { aclNewCfgEntry 5 }
aclNewCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { aclNewCfgEntry 6 }
aclNewCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
any(2),
none(3),
tagged(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet tagging format to be filtered."
::= { aclNewCfgEntry 7 }
aclNewCfgIPFmt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ipv4(2),
ipv6(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet IP format to be filtered."
::= { aclNewCfgEntry 8 }
aclNewCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 9 }
aclNewCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcMACAddress
for filtering."
::= { aclNewCfgEntry 10 }
aclNewCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 11 }
aclNewCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstMACAddress
for filtering."
::= { aclNewCfgEntry 12 }
aclNewCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
"
::= { aclNewCfgEntry 13 }
aclNewCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclNewCfgEntry 14 }
aclNewCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff)."
::= { aclNewCfgEntry 15 }
aclNewCfgVLanMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgVLanId for filtering."
::= { aclNewCfgEntry 16 }
aclNewCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclNewCfgEntry 17 }
aclNewCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of service to be filtered."
::= { aclNewCfgEntry 18 }
aclNewCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be filtered."
::= { aclNewCfgEntry 19 }
aclNewCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 20 }
aclNewCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcIPAddress
for filtering."
::= { aclNewCfgEntry 21 }
aclNewCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 22 }
aclNewCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstIPAddress for filtering."
::= { aclNewCfgEntry 23 }
aclNewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 24 }
aclNewCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgSrcPort for filtering."
::= { aclNewCfgEntry 25 }
aclNewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 26 }
aclNewCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgDstPort for filtering."
::= { aclNewCfgEntry 27 }
aclNewCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclNewCfgEntry 28 }
aclNewCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f."
::= { aclNewCfgEntry 39 }
aclNewCfgEgressPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { aclNewCfgEntry 29 }
aclNewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclNewCfgEntry 30 }
aclNewCfgAddEgressPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read."
::= { aclNewCfgEntry 31 }
aclNewCfgRemoveEgressPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from the specified ACL. A value of zero
is always returned when this object is read."
::= { aclNewCfgEntry 32 }
aclNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 33 }
aclNewCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter Action for this ACL."
::= { aclNewCfgEntry 41 }
aclNewCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter state for this ACL."
::= { aclNewCfgEntry 42 }
aclNewCfgKbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (64..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The commited rate of meter associated with this ACL entry."
::= { aclNewCfgEntry 43 }
aclNewCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maxmium burst sizeof meter associated with this ACL entry."
::= { aclNewCfgEntry 44 }
aclNewCfgInprofUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile user defined priority for this ACL."
::= { aclNewCfgEntry 45 }
aclNewCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { aclNewCfgEntry 46 }
aclNewCfgInprofTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable/disable setting in profile pkts based on TOS bits."
::= { aclNewCfgEntry 47 }
aclNewCfgOutprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set out profile pkts DSCP value."
::= { aclNewCfgEntry 48 }
aclNewCfgInprofUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile update method for this ACL."
::= { aclNewCfgEntry 49 }
aclNewCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL is enabled or not."
::= { aclNewCfgEntry 50 }
aclNewCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this ACL is enabled or not."
::= { aclNewCfgEntry 51 }
aclNewCfgReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 52 }
aclNewCfgEthernetReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 53 }
aclNewCfgIpv4Reset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 54 }
aclNewCfgTcpudpReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 55 }
aclNewCfgMeterReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 56 }
aclNewCfgRemarkReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 57 }
aclNewCfgRemarkInprofReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 58 }
aclNewCfgRemarkOutprofReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 59 }
aclNewCfgPktfmtReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 60 }
-- ---------------------------------------------------------- --
-- ACL Group Configuration
-- ---------------------------------------------------------- --
aclGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclGroupCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL Group configuration."
::= { aclGroup 1 }
aclGroupCurCfgEntry OBJECT-TYPE
SYNTAX AclGroupCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular ACL configuration."
INDEX { aclGroupCurCfgIndex }
::= { aclGroupCurCfgTable 1 }
AclGroupCurCfgEntry ::= SEQUENCE {
aclGroupCurCfgIndex Unsigned32,
aclGroupCurCfgMemberAcls OCTET STRING
}
aclGroupCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL Group entry."
::= { aclGroupCurCfgEntry 1 }
aclGroupCurCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group."
::= { aclGroupCurCfgEntry 2 }
aclGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclGroupNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL Group configuration."
::= { aclGroup 2 }
aclGroupNewCfgEntry OBJECT-TYPE
SYNTAX AclGroupNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL configuration."
INDEX { aclGroupNewCfgIndex }
::= { aclGroupNewCfgTable 1 }
AclGroupNewCfgEntry ::= SEQUENCE {
aclGroupNewCfgIndex Unsigned32,
aclGroupNewCfgMemberAcls OCTET STRING,
aclGroupNewCfgAddAcl Unsigned32,
aclGroupNewCfgRemoveAcl Unsigned32,
aclGroupNewCfgDelete INTEGER
}
aclGroupNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL Group entry."
::= { aclGroupNewCfgEntry 1 }
aclGroupNewCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group."
::= { aclGroupNewCfgEntry 2 }
aclGroupNewCfgAddAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 4 }
aclGroupNewCfgRemoveAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 5 }
aclGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read."
::= { aclGroupNewCfgEntry 8 }
aclCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port acl groups configuration."
::= { aclCfg 1 }
aclCurCfgPortTableEntry OBJECT-TYPE
SYNTAX AclCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port acl configuration."
INDEX { aclCurCfgPortIndex }
::= { aclCurCfgPortTable 1 }
AclCurCfgPortTableEntry ::= SEQUENCE {
aclCurCfgPortIndex Integer32,
aclCurCfgPortAclBmap OCTET STRING,
aclCurCfgPortAclGrpBmap OCTET STRING
}
aclCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB."
::= { aclCurCfgPortTableEntry 1 }
aclCurCfgPortAclBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclCurCfgPortTableEntry 2 }
aclCurCfgPortAclGrpBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclCurCfgPortTableEntry 4 }
aclNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port acl configuration."
::= { aclCfg 2 }
aclNewCfgPortTableEntry OBJECT-TYPE
SYNTAX AclNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port acl groups configuration."
INDEX { aclNewCfgPortIndex }
::= { aclNewCfgPortTable 1 }
AclNewCfgPortTableEntry ::= SEQUENCE {
aclNewCfgPortIndex Integer32,
aclNewCfgPortAddAcl Unsigned32,
aclNewCfgPortAddAclGrp Unsigned32,
aclNewCfgPortRemoveAcl Unsigned32,
aclNewCfgPortRemoveAclGrp Unsigned32,
aclNewCfgPortAclBmap OCTET STRING,
aclNewCfgPortAclGrpBmap OCTET STRING
}
aclNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB."
::= { aclNewCfgPortTableEntry 1 }
aclNewCfgPortAddAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl to be added to the specified port. A
'0' value is returned when read."
::= {aclNewCfgPortTableEntry 2 }
aclNewCfgPortAddAclGrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl group to be added to the specified port. A
'0' value is returned when read."
::= {aclNewCfgPortTableEntry 4 }
aclNewCfgPortRemoveAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl to be removed from the specified port.
A '0' value is returned when read."
::= { aclNewCfgPortTableEntry 5 }
aclNewCfgPortRemoveAclGrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl group to be removed from the specified port.
A '0' value is returned when read."
::= { aclNewCfgPortTableEntry 7 }
aclNewCfgPortAclBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclNewCfgPortTableEntry 8 }
aclNewCfgPortAclGrpBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl group applied to the port.
0 - The represented acl group not applied to the port."
::= { aclNewCfgPortTableEntry 10 }
-- ----------------------------------------------------------------------------
-- } INSERT: bt2acl
-- ----------------------------------------------------------------------------
qos OBJECT IDENTIFIER
::= { hpSwitchBladeType4-Mgmt 8 }
-- ----------------------------------------------------------------------------
-- { INSERT: bt2qos
-- ----------------------------------------------------------------------------
qosConfigs OBJECT IDENTIFIER ::= { qos 1 }
qosStats OBJECT IDENTIFIER ::= { qos 2 }
qosInfo OBJECT IDENTIFIER ::= { qos 3 }
qosOper OBJECT IDENTIFIER ::= { qos 4 }
qos8021p OBJECT IDENTIFIER ::= { qosConfigs 1 }
-- QOS Configuration
qosCurCfgPortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS Port Priority configuration."
::= { qos8021p 1 }
qosCurCfgPortPriorityEntry OBJECT-TYPE
SYNTAX QoSCurCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular QOS Port Priority configuration."
INDEX { qosCurCfgPortIndex }
::= { qosCurCfgPortPriorityTable 1 }
QoSCurCfgPortPriorityEntry ::= SEQUENCE {
qosCurCfgPortIndex Integer32,
qosCurCfgPortPriority INTEGER
}
qosCurCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qosCurCfgPortPriorityEntry 1 }
qosCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Priority Should be between 0 and 7"
::= { qosCurCfgPortPriorityEntry 2 }
qosNewCfgPortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS Port Priority configuration."
::= { qos8021p 2 }
qosNewCfgPortPriorityEntry OBJECT-TYPE
SYNTAX QoSNewCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular QOS Port Priority configuration."
INDEX { qosNewCfgPortIndex }
::= { qosNewCfgPortPriorityTable 1 }
QoSNewCfgPortPriorityEntry ::= SEQUENCE {
qosNewCfgPortIndex Integer32,
qosNewCfgPortPriority INTEGER
}
qosNewCfgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qosNewCfgPortPriorityEntry 1 }
qosNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch Port Priority Should be between 0 and 7"
::= { qosNewCfgPortPriorityEntry 2 }
qosCurCfgPriorityCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Frame Priority and COSq configuration."
::= { qos8021p 3 }
qosCurCfgPriorityCoSEntry OBJECT-TYPE
SYNTAX QoSCurCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Frame Priority and COSq configuration."
INDEX { qosCurCfgPriorityIndex }
::= { qosCurCfgPriorityCoSTable 1 }
QoSCurCfgPriorityCoSEntry ::= SEQUENCE {
qosCurCfgPriorityIndex INTEGER,
qosCurCfgPriorityCoSq INTEGER
}
qosCurCfgPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame priority Number"
::= { qosCurCfgPriorityCoSEntry 1 }
qosCurCfgPriorityCoSq OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq for a Frame Priority Should be between 0 and 7"
::= { qosCurCfgPriorityCoSEntry 2 }
qosNewCfgPriorityCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Frame Priority and COSq configuration."
::= { qos8021p 4 }
qosNewCfgPriorityCoSEntry OBJECT-TYPE
SYNTAX QoSNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Frame Priority and COSq configuration."
INDEX { qosNewCfgPriorityIndex }
::= { qosNewCfgPriorityCoSTable 1 }
QoSNewCfgPriorityCoSEntry ::= SEQUENCE {
qosNewCfgPriorityIndex INTEGER,
qosNewCfgPriorityCoSq INTEGER
}
qosNewCfgPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame priority Number"
::= { qosNewCfgPriorityCoSEntry 1 }
qosNewCfgPriorityCoSq OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoSq for a Frame Priority Should be between 0 and 7"
::= { qosNewCfgPriorityCoSEntry 2 }
qosCurCfgCosWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CoSq and Weight configuration."
::= { qos8021p 5 }
qosCurCfgCosWeightEntry OBJECT-TYPE
SYNTAX QoSCurCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CoSq and Weight configuration."
INDEX { qosCurCfgCosIndex }
::= { qosCurCfgCosWeightTable 1 }
QoSCurCfgCosWeightEntry ::= SEQUENCE {
qosCurCfgCosIndex INTEGER,
qosCurCfgCosWeight INTEGER
}
qosCurCfgCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq Number"
::= { qosCurCfgCosWeightEntry 1 }
qosCurCfgCosWeight OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Weight of CoSq"
::= { qosCurCfgCosWeightEntry 2 }
qosNewCfgCosWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CoSq and Weight configuration."
::= { qos8021p 6 }
qosNewCfgCosWeightEntry OBJECT-TYPE
SYNTAX QoSNewCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CoSq and Weight configuration."
INDEX { qosNewCfgCosIndex }
::= { qosNewCfgCosWeightTable 1 }
QoSNewCfgCosWeightEntry ::= SEQUENCE {
qosNewCfgCosIndex INTEGER,
qosNewCfgCosWeight INTEGER
}
qosNewCfgCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq Number"
::= { qosNewCfgCosWeightEntry 1 }
qosNewCfgCosWeight OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Weight of CoSq"
::= { qosNewCfgCosWeightEntry 2 }
qosDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
defaultWeight(2),
defaultPriority(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Load default configuration."
::= { qos8021p 9 }
-- ----------------------------------------------------------------------------
-- } INSERT: bt2qos
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: hpRoot
-- ----------------------------------------------------------------------------
END