mibs/hp/HP-ICF-DOWNLOAD
HP-ICF-DOWNLOAD DEFINITIONS ::= BEGIN
IMPORTS
Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
DisplayString, RowStatus, TDomain, TAddress, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
hpicfObjectModules, hpicfCommon
FROM HP-ICF-OID
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB; -- RFC2851(-> 3291)
hpicfDownloadMib MODULE-IDENTITY
LAST-UPDATED "200504042143Z" -- April 4, 2005
ORGANIZATION "Hewlett Packard Company,
Procurve Networking Business"
CONTACT-INFO
"Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION
"This MIB module manages the network download
capabilities for devices in the HP Integrated
Communication Facility product line."
REVISION "200011032216Z" -- November 3, 2000
DESCRIPTION "Updated division name."
REVISION "9703060336Z" -- March 6, 1997
DESCRIPTION
"Added some ranges that were missing."
REVISION "9609100225Z" -- September 10, 1996
DESCRIPTION
"Updated division name in ORGANIZATION clause."
REVISION "9601250356Z" -- January 25, 1996
DESCRIPTION
"Split this MIB module from the former monolithic
hp-icf MIB."
REVISION "9507130000Z" -- July 13, 1995
DESCRIPTION
"Version of MIB module that added support for
specifying the download destination, and
tracking progress using octet count and passes
remaining."
REVISION "9411200000Z" -- November 20, 1994
DESCRIPTION
"Version of MIB module that expanded the error
codes for download status."
REVISION "9402250000Z" -- February 25, 1994
DESCRIPTION
"Initial version of this MIB module."
::= { hpicfObjectModules 4 }
hpicfDownload
OBJECT IDENTIFIER ::= { hpicfCommon 3 }
--
-- Deprecated Download Table
--
hpicfDownloadTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDownloadEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table of firmware downloads to this device.
There will at any time be either 0 or 1 rows in
this table, and the only valid index for this
table is 1. It is only a table so that we may
take advantage of the RowStatus textual convention
for configuring the download parameters.
Since this table does not support IPv6, it is
deprecated in favor of hpicfDownloadInetTable."
::= { hpicfDownload 1 }
hpicfDownloadEntry OBJECT-TYPE
SYNTAX HpicfDownloadEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The row in the hpicfDownloadTable containing the
download parameters.
Since this table does not support IPv6, it is depreca ted in favor of hpicfDownloadInetEntry."
INDEX { hpicfDownloadIndex }
::= { hpicfDownloadTable 1 }
HpicfDownloadEntry ::=
SEQUENCE {
hpicfDownloadIndex INTEGER,
hpicfDownloadOwnerAddress TAddress,
hpicfDownloadOwnerDomain TDomain,
hpicfDownloadTAddress TAddress,
hpicfDownloadTDomain TDomain,
hpicfDownloadFilename DisplayString,
hpicfDownloadResetType INTEGER,
hpicfDownloadErrorStatus INTEGER,
hpicfDownloadErrorText DisplayString,
hpicfDownloadStatus RowStatus,
hpicfDownloadPassesLeft Integer32,
hpicfDownloadOctetCount Integer32,
hpicfDownloadDestination DisplayString
}
hpicfDownloadIndex OBJECT-TYPE
SYNTAX INTEGER {
dlInstance(1)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The index which uniquely identifies this row.
The only legal value for this object is 1."
::= { hpicfDownloadEntry 1 }
hpicfDownloadOwnerAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The transport address of the management station
that initiated this download attempt, formatted
according to the value of the associated instance
of hpicfDownloadOwnerDomain."
::= { hpicfDownloadEntry 2 }
hpicfDownloadOwnerDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The kind of transport service used by the
management station that initiated this download
attempt."
::= { hpicfDownloadEntry 3 }
hpicfDownloadTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The transport address of the node to download
firmware from, formatted according to the value of
the associated instance of hpicfDownloadTDomain.
An attempt to modify this value will fail if the
associated hpicfDownloadStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { hpicfDownloadEntry 4 }
hpicfDownloadTDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The kind of transport service to be used for the
download. Currently supports snmpUDPDomain and
snmpIPXDomain.
An attempt to modify this value will fail if the
associated hpicfDownloadStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { hpicfDownloadEntry 5 }
hpicfDownloadFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Filename and path of file to download (maximum
length of 63 characters + NULL).
An attempt to modify this value will fail if the
associated hpicfDownloadStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { hpicfDownloadEntry 6 }
hpicfDownloadResetType OBJECT-TYPE
SYNTAX INTEGER {
noReset(1),
warmReset(2),
factoryReset(3)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The type of reset to perform after completion of
the firmware download. Note that not all agents
will support all possible values, and there may
be other agent-specific values for this object."
::= { hpicfDownloadEntry 7 }
hpicfDownloadErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
fileNotFound(1),
accessViolation(2),
diskFull(3),
illegalOperation(4),
unknownTID(5),
fileExists(6),
noSuchUser(7),
notDefined(8),
corruptFile(9),
noServer(10),
tftpTimeout(11),
hardwareError(12),
success(13),
aborted(14),
inProgress(15),
idle(16),
erasingEeprom(17),
incompleteFirmware(18),
requirePowerCycle(19),
cannotUpgrade(20),
cannotDowngrade(21)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Status of download. The first seven codes are
equal to the codes defined by the TFTP protocol.
'notDefined' is the same as TFTP protocol error 0.
The following are the other possible values for this
object:
corruptFile - the agent detected a problem
with the download file format.
noServer - the TFTP server at
hpicfDownloadTAddress did not
respond to the TFTP request.
tftpTimeout - the download was aborted due
to excessive timeouts.
hardwareError - there was a hardware problem
on the agent that forced an
abort of the download (see
hpicfDownloadErrorText for
more detailed information).
success - the download has completed
successfully.
aborted - the download was aborted by
setting the
hpicfDownloadStatus to
'notInService' or 'delete'.
inProgress - the TFTP transfer is currently
active.
idle - means that the download has
not yet started (i.e. the
value of hpicfDownloadStatus
has not yet been set to
'active').
erasingEeprom - the agent is currently erasing
the EEPROM device. Currently
only used on JetDirect agents.
incompleteFirmware - the agent is running an
incomplete version of firmware
and requires a download.
Currently only used on
JetDirect agents.
requirePowerCycle - the agent must be power cycled
to run the newly downloaded
firmware. Currently only used
on JetDirect agents.
cannotUpgrade - the agent's current firmware
revision cannot be upgraded to
the revision in the download
file.
cannotDowngrade - the agent's current firmware
revision cannot be downgraded
to the revision in the
download file."
::= { hpicfDownloadEntry 8 }
hpicfDownloadErrorText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A textual description of the current error status
of the firmware download."
::= { hpicfDownloadEntry 9 }
hpicfDownloadStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The status of this download entry. This object
may not be set to 'active' unless the following
columnar objects exist in this row:
hpicfDownloadTAddress, hpicfDownloadTDomain,
hpicfDownloadFilename, and
hpicfDownloadResetType."
::= { hpicfDownloadEntry 10 }
hpicfDownloadPassesLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of passes remaining in the current
download attempt. Some agents (currently JetDirect
agents) require multiple passes through the download
file in order to download a firmware image. This
object indicates the number of passes remaining,
including the current pass. The object is
initialized by the agent to the number of passes
required to complete the download when the
corresponding instance of hpicfDownloadStatus is set
to 'active'. It is decremented by one each time a
pass completes."
::= { hpicfDownloadEntry 11 }
hpicfDownloadOctetCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of octets that have been transferred
during the current pass. This object is initialized
to zero by the agent when the corresponding instance
of hpicfDownloadStatus is set to 'active', and
reinitialized to zero at the beginning of each pass."
::= { hpicfDownloadEntry 12 }
hpicfDownloadDestination OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The destination of the download file on the agent.
The allowable destination names depend on the type
of agent being downloaded. In all cases, a
destination of '/os/primary' or '/os/secondary'
indicates that this is a download of the agent's
firmware image. The agent will use '/os/primary'
as the default value for this object when the row
is created.
ICF router agents also allow a download of a config
file. Currently, the name of the config file on the
agent is '/config'.
An agent should reject an attempt to set this object
to a destination name that does not make sense for
this type of agent."
DEFVAL { "/os/primary" } -- public
::= { hpicfDownloadEntry 13 }
hpicfDownloadLogMaxSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of the download log entries
supported by this agent. Note that 0 is a
legal value for this variable."
::= { hpicfDownload 2 }
hpicfDownloadLogSize OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of download log entries currently in
the hpicfDownloadLogTable."
::= { hpicfDownload 3 }
hpicfDownloadLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDownloadLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A log of the hpicfDownloadSize most recent
download attempts to this device. The first entry
in the table is the oldest."
::= { hpicfDownload 4 }
hpicfDownloadLogEntry OBJECT-TYPE
SYNTAX HpicfDownloadLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hpicfDownloadLogTable containing
information about a single download attempt."
INDEX { hpicfDlLogIndex }
::= { hpicfDownloadLogTable 1 }
HpicfDownloadLogEntry ::=
SEQUENCE {
hpicfDlLogIndex Integer32,
hpicfDlLogOwnerAddress TAddress,
hpicfDlLogOwnerDomain TDomain,
hpicfDlLogTAddress TAddress,
hpicfDlLogTDomain TDomain,
hpicfDlLogFilename DisplayString,
hpicfDlLogResetType INTEGER,
hpicfDlLogErrorStatus INTEGER,
hpicfDlLogErrorText DisplayString
}
hpicfDlLogIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this entry in the download log
table. Index 1 will always contain the oldest
entry. If the table is full when a download
attempt is made, the new entry becomes the last
entry (hpicfDownloadLogMaxSize), and all earlier
entries are shifted down by one entry, removing
the old index 1."
::= { hpicfDownloadLogEntry 1 }
hpicfDlLogOwnerAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport address of the management station
that attempted to initiate a download of this
device, formatted according to the value of
hpicfDlLastOwnerDomain."
::= { hpicfDownloadLogEntry 2 }
hpicfDlLogOwnerDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The kind of transport service used by the
management station that attempted to initiate a
download of this device."
::= { hpicfDownloadLogEntry 3 }
hpicfDlLogTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport address of the node from which this
device attempted to download firmware, formatted
according to the value of hpicfDlLastTDomain."
::= { hpicfDownloadLogEntry 4 }
hpicfDlLogTDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The kind of transport service which was used for
the attempt to download firmware to this device."
::= { hpicfDownloadLogEntry 5 }
hpicfDlLogFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The filename from which this device attempted to
download firmware."
::= { hpicfDownloadLogEntry 6 }
hpicfDlLogResetType OBJECT-TYPE
SYNTAX INTEGER {
noReset(1),
warmReset(2),
factoryReset(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of reset requested to be performed
after completion of the firmware download
attempt."
::= { hpicfDownloadLogEntry 7 }
hpicfDlLogErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
fileNotFound(1),
accessViolation(2),
diskFull(3),
illegalOperation(4),
unknownTID(5),
fileExists(6),
noSuchUser(7),
notDefined(8),
corruptFile(9),
noServer(10),
tftpTimeout(11),
hardwareError(12),
success(13),
aborted(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the attempt to download firmware to
this device. The values are the same as the
corresponding values of hpicfDownloadErrorStatus."
::= { hpicfDownloadLogEntry 8 }
hpicfDlLogErrorText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the final error status
of the attempt to download firmware to this
device."
::= { hpicfDownloadLogEntry 9 }
hpicfDownloadTftpConfig OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object allows switch to enable or disable
tftp. Default value is 2. Cannot be enabled if
sftp is enabled."
::= { hpicfDownload 5 }
hpicfDownloadTftpServerConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When this is true(1), the TFTP server is enabled
and will process incoming requests. When this is
false(2), the TFTP server will be shut down and
will not accept incoming connections."
::= { hpicfDownload 6 }
hpicfDownloadTftp6Config OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object allows switch to enable or disable
tftp. Default value is 2. Cannot be enabled if
sftp is enabled."
::= { hpicfDownload 7 }
hpicfDownloadTftp6ServerConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When this is true(1), the TFTP server is enabled
and will process incoming requests. When this is
false(2), the TFTP server will be shut down and
will not accept incoming connections."
::= { hpicfDownload 8 }
--
-- Download Table
--
hpicfDownloadInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfDownloadInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of firmware downloads to this device.
There will at any time be either 0 or 1 rows in
this table, and the only valid index for this
table is 1. It is only a table so that we may
take advantage of the RowStatus textual convention
for configuring the download parameters."
::= { hpicfDownload 9 }
hpicfDownloadInetEntry OBJECT-TYPE
SYNTAX HpicfDownloadInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the hpicfDownloadInetTable containing the download parameters."
INDEX { hpicfDownloadInetIndex }
::= { hpicfDownloadInetTable 1 }
HpicfDownloadInetEntry ::=
SEQUENCE {
hpicfDownloadInetIndex Integer32,
hpicfDownloadInetTAddressType InetAddressType,
hpicfDownloadInetTAddress InetAddress,
hpicfDownloadInetFilename DisplayString,
hpicfDownloadInetOwnerAddressType InetAddressType,
hpicfDownloadInetOwnerAddress InetAddress,
hpicfDownloadInetSourcePort Integer32,
hpicfDownloadInetDestinationPort Integer32,
hpicfDownloadInetFileTransferType INTEGER,
hpicfDownloadInetResetType INTEGER,
hpicfDownloadInetErrorStatus INTEGER,
hpicfDownloadInetErrorText DisplayString,
hpicfDownloadInetStatus RowStatus,
hpicfDownloadInetPassesLeft Integer32,
hpicfDownloadInetOctetCount Integer32,
hpicfDownloadInetDestination DisplayString,
hpicfDownloadInetOpType INTEGER
}
hpicfDownloadInetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index which uniquely identifies this row."
::= { hpicfDownloadInetEntry 1 }
hpicfDownloadInetTAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of address in the corresponding
hpicfDownloadTAddress object. An attempt to
modify this value will fail if the associated
hpicfDownloadInetStatus object would be equal to
'active' both before and after the modification attempt."
::= { hpicfDownloadInetEntry 2 }
hpicfDownloadInetTAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transport address of the node to download
firmware from, formatted according to the value of
the associated instance of hpicfDownloadInetTAddressType.
An attempt to modify this value will fail if the
associated hpicfDownloadInetStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { hpicfDownloadInetEntry 3 }
hpicfDownloadInetFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filename and path of file to download (maximum
length of 63 characters + NULL).
An attempt to modify this value will fail if the
associated hpicfDownloadInetStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { hpicfDownloadInetEntry 4 }
hpicfDownloadInetOwnerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of address in the corresponding
hpicfDownloadInetOwnerAddress object."
::= { hpicfDownloadInetEntry 5 }
hpicfDownloadInetOwnerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport address of the management station
that initiated this download attempt, formatted
according to the value of the associated instance
of hpicfDownloadInetOwnerAddressType."
::= { hpicfDownloadInetEntry 6 }
hpicfDownloadInetSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port of the management station
that initiated this download attempt."
::= { hpicfDownloadInetEntry 7 }
hpicfDownloadInetDestinationPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port of the management station
that initiated this download attempt."
::= { hpicfDownloadInetEntry 8 }
hpicfDownloadInetFileTransferType OBJECT-TYPE
SYNTAX INTEGER {
usb(1),
tftp(2),
xmodem(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The FileTransfer Method used by the management station
to initiate the download attempt."
::= { hpicfDownloadInetEntry 9 }
hpicfDownloadInetResetType OBJECT-TYPE
SYNTAX INTEGER {
noReset(1),
warmReset(2),
factoryReset(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of reset to perform after completion of
the firmware download. Note that not all agents
will support all possible values, and there may
be other agent-specific values for this object."
::= { hpicfDownloadInetEntry 10 }
hpicfDownloadInetErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
fileNotFound(1),
accessViolation(2),
diskFull(3),
illegalOperation(4),
unknownTID(5),
fileExists(6),
noSuchUser(7),
notDefined(8),
corruptFile(9),
noServer(10),
tftpTimeout(11),
hardwareError(12),
success(13),
aborted(14),
inProgress(15),
idle(16),
erasingEeprom(17),
incompleteFirmware(18),
requirePowerCycle(19),
cannotUpgrade(20),
cannotDowngrade(21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of download. The first seven codes are
equal to the codes defined by the TFTP protocol.
'notDefined' is the same as TFTP protocol error 0.
The following are the other possible values for this
object:
corruptFile - the agent detected a problem
with the download file format.
noServer - the TFTP server at
hpicfDownloadTAddress did not
respond to the TFTP request.
tftpTimeout - the download was aborted due
to excessive timeouts.
hardwareError - there was a hardware problem
on the agent that forced an
abort of the download (see
hpicfDownloadErrorText for
more detailed information).
success - the download has completed
successfully.
aborted - the download was aborted by
setting the
hpicfDownloadStatus to
'notInService' or 'delete'.
inProgress - the TFTP transfer is currently
active.
idle - means that the download has
not yet started (i.e. the
value of hpicfDownloadStatus
has not yet been set to
'active').
erasingEeprom - the agent is currently erasing
the EEPROM device. Currently
only used on JetDirect agents.
incompleteFirmware - the agent is running an
incomplete version of firmware
and requires a download.
Currently only used on
JetDirect agents.
requirePowerCycle - the agent must be power cycled
to run the newly downloaded
firmware. Currently only used
on JetDirect agents.
cannotUpgrade - the agent's current firmware
revision cannot be upgraded to
the revision in the download
file.
cannotDowngrade - the agent's current firmware
revision cannot be downgraded
to the revision in the
download file."
::= { hpicfDownloadInetEntry 11 }
hpicfDownloadInetErrorText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the current error status
of the firmware download."
::= { hpicfDownloadInetEntry 12 }
hpicfDownloadInetStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this download entry. This object
may not be set to 'active' unless the following
columnar objects exist in this row:
hpicfDownloadInetTAddress, hpicfDownloadInetTAddressType,
hpicfDownloadInetFilename, and
hpicfDownloadInetResetType."
::= { hpicfDownloadInetEntry 13 }
hpicfDownloadInetPassesLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of passes remaining in the current
download attempt. Some agents (currently JetDirect
agents) require multiple passes through the download
file in order to download a firmware image. This
object indicates the number of passes remaining,
including the current pass. The object is
initialized by the agent to the number of passes
required to complete the download when the
corresponding instance of hpicfDownloadStatus is set
to 'active'. It is decremented by one each time a
pass completes."
::= { hpicfDownloadInetEntry 14 }
hpicfDownloadInetOctetCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that have been transferred
during the current pass. This object is initialized
to zero by the agent when the corresponding instance
of hpicfDownloadStatus is set to 'active', and
reinitialized to zero at the beginning of each pass."
::= { hpicfDownloadInetEntry 15 }
hpicfDownloadInetDestination OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination of the download file on the agent.
The allowable destination names depend on the type
of agent being downloaded. In all cases, a
destination of '/os/primary' or '/os/secondary'
indicates that this is a download of the agent's
firmware image. The agent will use '/os/primary'
as the default value for this object when the row
is created.
ICF router agents also allow a download of a config
file. Currently, the name of the config file on the
agent is '/config'.
An agent should reject an attempt to set this object
to a destination name that does not make sense for
this type of agent."
DEFVAL { "/os/primary" } -- public
::= { hpicfDownloadInetEntry 16 }
hpicfDownloadInetOpType OBJECT-TYPE
SYNTAX INTEGER {
ftget(1),
ftput(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The OpType which is used for Geting or Puting
file from to the server."
::= { hpicfDownloadInetEntry 17 }
-- conformance information
hpicfDownloadConformance
OBJECT IDENTIFIER ::= { hpicfDownloadMib 1 }
hpicfDownloadCompliances
OBJECT IDENTIFIER ::= { hpicfDownloadConformance 1 }
hpicfDownloadGroups
OBJECT IDENTIFIER ::= { hpicfDownloadConformance 2 }
-- compliance statements
hpicfDownloadCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for HP ICF network
downloadable devices."
MODULE
MANDATORY-GROUPS { hpicfDownloadGroup }
GROUP hpicfDownloadLogGroup
DESCRIPTION
"This group should be implemented by devices
that are able to keep log of network download
attempts."
::= { hpicfDownloadCompliances 1 }
hpicfDownloadConfigCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"New version of the compliance statement for
HP ICF network downloadable devices that allows
for monitoring in-progress downloads and for
directing a download to different destinations
on the device."
MODULE
MANDATORY-GROUPS { hpicfDownloadConfigGroup }
GROUP hpicfDownloadLogGroup
DESCRIPTION
"This group should be implemented by devices
that are able to keep log of network download
attempts."
::= { hpicfDownloadCompliances 2 }
hpicfDownloadConfigInetCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"New version of the compliance statement for
HP ICF network downloadable devices that allows
for monitoring in-progress downloads and for
directing a download to different destinations
on the device."
MODULE
MANDATORY-GROUPS { hpicfDownloadConfigInetGroup }
GROUP hpicfDownloadLogGroup
DESCRIPTION
"This group should be implemented by devices
that are able to keep log of network download
attempts."
::= { hpicfDownloadCompliances 3 }
-- units of conformance
hpicfDownloadGroup OBJECT-GROUP
OBJECTS { hpicfDownloadIndex,
hpicfDownloadOwnerAddress,
hpicfDownloadOwnerDomain,
hpicfDownloadTAddress,
hpicfDownloadTDomain,
hpicfDownloadFilename,
hpicfDownloadResetType,
hpicfDownloadErrorStatus,
hpicfDownloadErrorText,
hpicfDownloadStatus,
hpicfDownloadLogMaxSize,
hpicfDownloadLogSize
}
STATUS deprecated
DESCRIPTION
"********* THIS GROUP IS DEPRECATED *********
A collection of objects for controlling network
download of device firmware to ICF devices."
::= { hpicfDownloadGroups 1 }
hpicfDownloadLogGroup OBJECT-GROUP
OBJECTS { hpicfDlLogIndex,
hpicfDlLogOwnerAddress,
hpicfDlLogOwnerDomain,
hpicfDlLogTAddress,
hpicfDlLogTDomain,
hpicfDlLogFilename,
hpicfDlLogResetType,
hpicfDlLogErrorStatus,
hpicfDlLogErrorText
}
STATUS current
DESCRIPTION
"A collection of objects for maintaining a log of
network download attempts to ICF devices."
::= { hpicfDownloadGroups 2 }
hpicfDownloadConfigGroup OBJECT-GROUP
OBJECTS { hpicfDownloadIndex,
hpicfDownloadOwnerAddress,
hpicfDownloadOwnerDomain,
hpicfDownloadTAddress,
hpicfDownloadTDomain,
hpicfDownloadFilename,
hpicfDownloadResetType,
hpicfDownloadErrorStatus,
hpicfDownloadErrorText,
hpicfDownloadStatus,
hpicfDownloadPassesLeft,
hpicfDownloadOctetCount,
hpicfDownloadDestination,
hpicfDownloadLogMaxSize,
hpicfDownloadLogSize
}
STATUS deprecated
DESCRIPTION
"A collection of objects for controlling and
monitoring network download of device firmware to
ICF devices."
::= { hpicfDownloadGroups 3 }
hpicfDownloadConfigInetGroup OBJECT-GROUP
OBJECTS {
hpicfDownloadLogMaxSize,
hpicfDownloadLogSize,
hpicfDownloadInetIndex,
hpicfDownloadInetTAddressType,
hpicfDownloadInetTAddress,
hpicfDownloadInetFilename,
hpicfDownloadInetOwnerAddressType,
hpicfDownloadInetOwnerAddress,
hpicfDownloadInetSourcePort,
hpicfDownloadInetDestinationPort,
hpicfDownloadInetFileTransferType,
hpicfDownloadInetResetType,
hpicfDownloadInetErrorStatus,
hpicfDownloadInetErrorText,
hpicfDownloadInetStatus,
hpicfDownloadInetPassesLeft,
hpicfDownloadInetOctetCount,
hpicfDownloadInetDestination,
hpicfDownloadInetOpType
}
STATUS current
DESCRIPTION
"A collection of objects for controlling and
monitoring network download of device firmware to
ICF devices."
::= { hpicfDownloadGroups 4 }
END