mibs/hpmsm/COLUBRIS-PUBLIC-ACCESS-MIB.my
-- ****************************************************************************
-- COLUBRIS-PUBLIC-ACCESS-MIB definitions
--
-- Copyright (c) 2004, Colubris Networks, Inc.
-- All Rights Reserved.
--
-- Colubris Networks Public Access MIB file.
--
-- ****************************************************************************
COLUBRIS-PUBLIC-ACCESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
IpAddress, Integer32, Unsigned32, Counter32, Gauge32, Counter64
FROM SNMPv2-SMI
MacAddress, DateAndTime, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
colubrisMgmtV2
FROM COLUBRIS-SMI
ColubrisNotificationEnable, ColubrisProfileIndexOrZero, ColubrisSSIDOrNone,
ColubrisUsersAuthenticationMode, ColubrisUsersAuthenticationType,
ColubrisSecurity,ColubrisPriorityQueue
FROM COLUBRIS-TC
;
colubrisPublicAccessMIB MODULE-IDENTITY
LAST-UPDATED "200511040000Z"
ORGANIZATION "Colubris Networks, Inc."
CONTACT-INFO "Colubris Networks
Postal: 200 West Street Ste 300
Waltham, Massachusetts 02451-1121
UNITED STATES
Phone: +1 781 684 0001
Fax: +1 781 684 0009
E-mail: cn-snmp@colubris.com"
DESCRIPTION "Colubris Networks Public Access MIB."
::= { colubrisMgmtV2 1 }
-- colubrisPublicAccessMIB definition
colubrisPublicAccessMIBObjects OBJECT IDENTIFIER ::= { colubrisPublicAccessMIB 1 }
-- public access groups
publicAccessGroup OBJECT IDENTIFIER ::= { colubrisPublicAccessMIBObjects 1 }
publicAccessDeviceGroup OBJECT IDENTIFIER ::= { colubrisPublicAccessMIBObjects 2 }
publicAccessUsersGroup OBJECT IDENTIFIER ::= { colubrisPublicAccessMIBObjects 3 }
publicAccessNASPortsGroup OBJECT IDENTIFIER ::= { colubrisPublicAccessMIBObjects 4 }
-- Public Access Status Group
-- A collection of objects providing basic instrumentation
-- and control of the authentication system entity.
publicAccessStatus OBJECT-TYPE
SYNTAX INTEGER
{
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the current status of the authentication system."
::= { publicAccessGroup 1 }
publicAccessStatusChangedCause OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..253))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the last cause of a status change. Mostly
used by the publicAccessStatusChanged trap."
::= { publicAccessGroup 2 }
-- Public Access Device Group
-- A collection of objects providing basic instrumentation and
-- control of the account used for device authentication.
publicAccessDeviceUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..253))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the username that the device uses when authenticating
itself to a RADIUS server."
::= { publicAccessDeviceGroup 1 }
publicAccessDeviceUserPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..230))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the password the device uses when authenticating
to a RADIUS server. For security reasons, this should be set
only if SNMP traffic is sent through a VPN tunnel. Reading this
attribute will return an empty string."
::= { publicAccessDeviceGroup 2 }
publicAccessDeviceSessionTimeoutAdminStatus OBJECT-TYPE
SYNTAX Unsigned32 (1..9999)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the interval of time between two consecutive
authentication attempts in minutes. At each successful
authentication the device configuration is refreshed.
This is not the time between RADIUS Access Request when
an authentication is proceeding without answers. For
that element, see the RADIUS Profile definition."
::= { publicAccessDeviceGroup 3 }
publicAccessDeviceSessionTimeoutOperStatus OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the interval of time between two consecutive
authentication attempts in seconds. At each successful
authentication the device configuration is refreshed.
This is not the time between RADIUS Access Request when
an authentication is proceeding without answers. For
that element, see the RADIUS Profile definition."
::= { publicAccessDeviceGroup 4 }
publicAccessDeviceConfigMode OBJECT-TYPE
SYNTAX ColubrisUsersAuthenticationMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies how configuration of the device is performed. This
can be via locally configured settings on the device, or
retrieved from a AAA server. If both options are enabled,
the settings retrieved from the AAA server overwrite the
local configuration settings."
::= { publicAccessDeviceGroup 5 }
publicAccessDeviceAuthenProfileIndex OBJECT-TYPE
SYNTAX ColubrisProfileIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the AAA server profile to use to authenticate
the device. This attribute only applies when
publicAccessDeviceConfigMode is set to 'profile' or
'localAndProfile'.
When the special value zero is specified, no AAA
server profile is selected."
::= { publicAccessDeviceGroup 6 }
publicAccessDeviceAccountingEnabled OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies if accounting information is generated by the
device and sent to the AAA server. The device generate
RADIUS accounting of type ON and OFF. This also covers accounting
of all access-lists independently of where they are used.
For accounting, the following status types are generated: START,
INTERIM-UPDATE, and STOP. Accounting information is generated
only if a valid AAA server profile is configured in the
publicAccessDeviceAccountingProfileIndex attribute."
::= { publicAccessDeviceGroup 7 }
publicAccessDeviceAccountingProfileIndex OBJECT-TYPE
SYNTAX ColubrisProfileIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the AAA server profile to use for device
accounting. This attribute only applies when
publicAccessDeviceAccountingEnabled is set to 'enable'.
When the special value zero is specified, the
value set inside publicAccessDeviceAuthenProfileIndex
is used instead."
::= { publicAccessDeviceGroup 8 }
publicAccessDeviceForceReconfiguration OBJECT-TYPE
SYNTAX INTEGER
{
idle(0),
forceReconfiguration(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify forceReconfiguration(1) to force the device to re-read
the local configuration file or re-issue an authentication request
to the AAA server, or both based on the value of the
publicAccessDeviceConfigMode attribute.
Reading this object always returns 'idle'. Re-issuing an
authentication only applies if a valid AAA server profile is
specified in publicAccessDeviceAuthenProfileIndex."
::= { publicAccessDeviceGroup 9 }
-- Public Access Users Group
-- A collection of objects providing information on
-- the users on the system.
publicAccessUsersMaxCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the maximum number of concurrent authenticated users."
::= { publicAccessUsersGroup 1 }
publicAccessUsersCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the number of currently authenticated users."
::= { publicAccessUsersGroup 2 }
publicAccessUsersThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the trigger value for sending the
publicAccessUsersThresholdTrap. When the number of users
logged into the public access interface is equal to or exceeds
this threshold value, a publicAccessUsersThresholdTrap is sent.
The threshold value cannot exceed publicAccessUsersMaxCount
or an error is returned. Set this to zero to disable
sending of the publicAccessUsersThresholdTrap."
::= { publicAccessUsersGroup 3 }
publicAccessUsersSessionTrapEnabled OBJECT-TYPE
SYNTAX ColubrisNotificationEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to enable, the publicAccessUsersSessionStart and
publicAccessUsersSessionStop traps are generated when a
user session begins or ends."
DEFVAL { disable }
::= { publicAccessUsersGroup 4 }
publicAccessUsersConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PublicAccessUsersConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Provides information on the user's authentication
method. In tabular form to allow multiple instances on an
agent."
::= { publicAccessUsersGroup 5 }
publicAccessUsersConfigEntry OBJECT-TYPE
SYNTAX PublicAccessUsersConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table."
INDEX { publicAccessUsersConfigIndex }
::= { publicAccessUsersConfigTable 1 }
PublicAccessUsersConfigEntry ::= SEQUENCE
{
publicAccessUsersConfigIndex Integer32,
publicAccessUsersConfigAuthenType ColubrisUsersAuthenticationType,
publicAccessUsersConfigAuthenMode ColubrisUsersAuthenticationMode,
publicAccessUsersConfigAuthenProfileIndex ColubrisProfileIndexOrZero,
publicAccessUsersConfigAuthenTimeout Unsigned32,
publicAccessUsersConfigAccountingEnabled INTEGER,
publicAccessUsersConfigAccountingProfileIndex ColubrisProfileIndexOrZero,
publicAccessUsersConfigInterfaceIndex InterfaceIndex,
publicAccessUsersConfigVirtualApProfileIndex Integer32
}
publicAccessUsersConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of a user profile in the publicAccessUsersConfigTable."
::= { publicAccessUsersConfigEntry 1 }
publicAccessUsersConfigAuthenType OBJECT-TYPE
SYNTAX ColubrisUsersAuthenticationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the mechanism used to authenticate users."
::= { publicAccessUsersConfigEntry 2 }
publicAccessUsersConfigAuthenMode OBJECT-TYPE
SYNTAX ColubrisUsersAuthenticationMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies how the user authentication is performed. It can
be done with the local user list or via a AAA server profile.
If both are enabled, the local user list is checked first."
::= { publicAccessUsersConfigEntry 3 }
publicAccessUsersConfigAuthenProfileIndex OBJECT-TYPE
SYNTAX ColubrisProfileIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the AAA profile to use for user authentication when
publicAccessUsersAuthenMode is set to 'profile' or 'localAndProfile'."
::= { publicAccessUsersConfigEntry 4 }
publicAccessUsersConfigAuthenTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Logins are refused if the AAA server does not respond
within this time period. Only applies when
coVirtualApUserAccessAuthenMode is set to 'profile' or
'localAndProfile' and when the users are authenticated via
'HTML' or 'MAC' authentication."
::= { publicAccessUsersConfigEntry 5 }
publicAccessUsersConfigAccountingEnabled OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates if accounting information is generated by the
device and sent to the AAA server for public access users.
Accounting information is generated only if a valid AAA
server profile is configured for
publicAccessUsersAccountingProfileIndex."
::= { publicAccessUsersConfigEntry 6 }
publicAccessUsersConfigAccountingProfileIndex OBJECT-TYPE
SYNTAX ColubrisProfileIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Identifies the AAA profile to send accounting to for
public access users. When zero is specified, the
value set inside publicAccessDeviceAuthenProfileIndex
is used instead."
::= { publicAccessUsersConfigEntry 7 }
publicAccessUsersConfigInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the local interface on which these configuration
parameters apply. This attribute is used with the
publicAccessUsersConfigVirtualApProfileIndex to uniquely
identify an entry in Virtual AP indexed tables."
::= { publicAccessUsersConfigEntry 8 }
publicAccessUsersConfigVirtualApProfileIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates a user's VAP profile currently associated
with these configuration parameters. This attribute is used
with the publicAccessUsersConfigInterfaceIndex to uniquely
identify an entry in Virtual AP indexed tables."
::= { publicAccessUsersConfigEntry 9 }
-- public access user table
publicAccessUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF PublicAccessUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing specific information for users authenticated
by the authentication system. In tabular form to allow
multiple instances on an agent."
::= { publicAccessUsersGroup 6 }
publicAccessUserEntry OBJECT-TYPE
SYNTAX PublicAccessUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a particular user that has been authenticated
by the authentication system.
publicAccessUserIndex - Uniquely identifies a user in the
table."
INDEX { publicAccessUserIndex }
::= { publicAccessUserTable 1 }
PublicAccessUserEntry ::= SEQUENCE
{
publicAccessUserIndex Integer32,
publicAccessUserAuthenType ColubrisUsersAuthenticationType,
publicAccessUserAuthenMode ColubrisUsersAuthenticationMode,
publicAccessUserState INTEGER,
publicAccessUserStationIpAddress IpAddress,
publicAccessUserName OCTET STRING,
publicAccessUserSessionStartTime DateAndTime,
publicAccessUserSessionDuration Counter32,
publicAccessUserIdleTime Counter32,
publicAccessUserBytesSent Counter64,
publicAccessUserBytesReceived Counter64,
publicAccessUserPacketsSent Counter32,
publicAccessUserPacketsReceived Counter32,
publicAccessUserForceDisconnection INTEGER,
publicAccessUserStationMacAddress MacAddress,
publicAccessUserApMacAddress MacAddress,
publicAccessUserGroupName OCTET STRING,
publicAccessUserSSID ColubrisSSIDOrNone,
publicAccessUserSecurity ColubrisSecurity,
publicAccessUserPHYType INTEGER,
publicAccessUserVLAN Integer32,
publicAccessUserApRadioIndex Integer32,
publicAccessUserConfigIndex Integer32,
publicAccessUserConnectedInterface OCTET STRING,
publicAccessUserBytesSentDropped Counter64,
publicAccessUserBytesReceivedDropped Counter64,
publicAccessUserPacketsSentDropped Counter32,
publicAccessUserPacketsReceivedDropped Counter32,
publicAccessUserRateLimitationEnabled TruthValue,
publicAccessUserMaxTransmitRate Integer32,
publicAccessUserMaxReceiveRate Integer32,
publicAccessUserBandwidthControlLevel ColubrisPriorityQueue,
publicAccessUserNASPort Unsigned32
}
publicAccessUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of a user in the publicAccessUserTable."
::= { publicAccessUserEntry 1 }
publicAccessUserAuthenType OBJECT-TYPE
SYNTAX ColubrisUsersAuthenticationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the mechanism used to authenticate the user."
::= { publicAccessUserEntry 2 }
publicAccessUserAuthenMode OBJECT-TYPE
SYNTAX ColubrisUsersAuthenticationMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies how user authentication is performed. It can
be done using a local user list defined on the device
or AAA server profile. If both modes are active the local
user list is checked first."
::= { publicAccessUserEntry 3 }
publicAccessUserState OBJECT-TYPE
SYNTAX INTEGER
{
unassigned(0),
connecting(1),
connected(2),
reconnecting(3),
disconnecting(4),
disconnected(5),
disconnectingAdministrative(6),
disconnectedAdministrative(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the current state of the user."
::= { publicAccessUserEntry 4 }
publicAccessUserStationIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's IP address."
::= { publicAccessUserEntry 5 }
publicAccessUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..253))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's name."
::= { publicAccessUserEntry 6 }
publicAccessUserSessionStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates when this user session was started."
::= { publicAccessUserEntry 7 }
publicAccessUserSessionDuration OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates how long the user's session has been active.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessUserEntry 8 }
publicAccessUserIdleTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates for how long the user's session has been idle.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessUserEntry 9 }
publicAccessUserBytesSent OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of bytes sent by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessUserEntry 10 }
publicAccessUserBytesReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of bytes received by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessUserEntry 11 }
publicAccessUserPacketsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of IP packets sent by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessUserEntry 12 }
publicAccessUserPacketsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of IP packets received by the user.
When this counter reaches its maximum value, it wraps
around and starts increasing again from zero."
::= { publicAccessUserEntry 13 }
publicAccessUserForceDisconnection OBJECT-TYPE
SYNTAX INTEGER
{
idle(0),
adminReset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this attribute to 'adminReset' disconnects
the user with a cause of ADMIN_RESET.
Reading this variable always return 'idle'."
::= { publicAccessUserEntry 14 }
publicAccessUserStationMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's MAC Address."
::= { publicAccessUserEntry 15 }
publicAccessUserApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's Access Point MAC Address when Location-
Aware is enabled or the Access Controller MAC Address."
::= { publicAccessUserEntry 16 }
publicAccessUserGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's Access Point Group Name (ONLY when
Location-aware is enabled and properly configured).
If this information is not available, a zero-Length
string is returned."
::= { publicAccessUserEntry 17 }
publicAccessUserSSID OBJECT-TYPE
SYNTAX ColubrisSSIDOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's Access Point SSID (ONLY when
Location-aware is enabled and properly configured).
If this information is not available, a zero-Length
string is returned."
::= { publicAccessUserEntry 18 }
publicAccessUserSecurity OBJECT-TYPE
SYNTAX ColubrisSecurity
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the user's security mode."
::= { publicAccessUserEntry 19 }
publicAccessUserPHYType OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
ieee802dot11a(1),
ieee802dot11b(2),
ieee802dot11g(3),
ieee802dot11n(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the user's radio type."
::= { publicAccessUserEntry 20 }
publicAccessUserVLAN OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the VLAN currently assigned to the user."
::= { publicAccessUserEntry 21 }
publicAccessUserApRadioIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the radio to which this user is associated.
The index 0 is reserved when location aware is not enabled
or not properly configured. It means that the system
could not determine on which interface the user is
connected. Please note that this information is not
related to the standard SNMP interface table. It is a
proprietary index information on the Radios in Colubris
devices."
::= { publicAccessUserEntry 22 }
publicAccessUserConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the configuration profile in the
publicAccessUsersConfigTable currently associated with
this user. When location aware is not enabled or not properly
configured, the first SSID of the first radio interface
is used as the default configuration profile."
::= { publicAccessUserEntry 23 }
publicAccessUserConnectedInterface OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Indicates the device's logical public interface to which
the user is connected. This will always be a string
containing 'br0'."
::= { publicAccessUserEntry 24 }
publicAccessUserBytesSentDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of bytes sent by the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero."
::= { publicAccessUserEntry 25 }
publicAccessUserBytesReceivedDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of bytes received for the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero."
::= { publicAccessUserEntry 26 }
publicAccessUserPacketsSentDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of packets sent by the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero."
::= { publicAccessUserEntry 27 }
publicAccessUserPacketsReceivedDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of packets received for the user and dropped due to rate limitation.
When this counter reaches its maximum value, it wraps around and starts increasing
again from zero."
::= { publicAccessUserEntry 28 }
publicAccessUserRateLimitationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies if rate limitation is enabled for the user."
::= { publicAccessUserEntry 29 }
publicAccessUserMaxTransmitRate OBJECT-TYPE
SYNTAX Integer32 (100..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum transmit rate for the user."
::= { publicAccessUserEntry 30 }
publicAccessUserMaxReceiveRate OBJECT-TYPE
SYNTAX Integer32 (100..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum receive rate for the user."
::= { publicAccessUserEntry 31 }
publicAccessUserBandwidthControlLevel OBJECT-TYPE
SYNTAX ColubrisPriorityQueue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the user's bandwidth control level."
::= { publicAccessUserEntry 32 }
publicAccessUserNASPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the NAS-Port value assigned to the user."
::= { publicAccessUserEntry 33 }
-- public access notification configuration
publicAccessUsersLoggedInTrapEnabled OBJECT-TYPE
SYNTAX ColubrisNotificationEnable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to enable, the publicAccessUsersLoggedInTrap is generated."
DEFVAL { disable }
::= { publicAccessUsersGroup 7 }
publicAccessUsersLoggedInTrapInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Interval between publicAccessUsersLoggedInTrap traps.
Setting this to 0 will disable periodic sending of these traps."
::= { publicAccessUsersGroup 8 }
-- Public Access NAS Ports Group
-- A collection of objects providing information related to
-- the Access Controller NAS Ports.
--
publicAccessNASPortCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the number of NAS-Port supported."
::= { publicAccessNASPortsGroup 1 }
-- public access NAS port table
-- This table has been added in order to support FreeRADIUS checkrad script.
-- It provide a way to retrieve the username for a give NAS-Port of the
-- Access Controller in an atomic fashion (1 OID request only).
publicAccessNASPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PublicAccessNASPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing specific information for NAS-Port
by the Access Controller. In tabular form to allow
multiple instances on an agent."
::= { publicAccessNASPortsGroup 2 }
publicAccessNASPortEntry OBJECT-TYPE
SYNTAX PublicAccessNASPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Information about a particular NAS-Port
by Access Controller.
publicAccessNASPortIndex - Uniquely identifies a NAS-Port in the
table."
INDEX { publicAccessNASPortIndex }
::= { publicAccessNASPortTable 1 }
PublicAccessNASPortEntry ::= SEQUENCE
{
publicAccessNASPortIndex Integer32,
publicAccessNASPortUserName OCTET STRING
}
publicAccessNASPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of a NAS-Port in the publicAccessNASPortTable."
::= { publicAccessNASPortEntry 1 }
publicAccessNASPortUserName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..253))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the user's name currently authenticated
by the Access Controller on this NAS-Port."
::= { publicAccessNASPortEntry 2 }
-- public access notifications
publicAccessMIBNotificationPrefix OBJECT IDENTIFIER ::= { colubrisPublicAccessMIB 2 }
publicAccessMIBNotifications OBJECT IDENTIFIER ::= { publicAccessMIBNotificationPrefix 0 }
publicAccessStatusChangedTrap NOTIFICATION-TYPE
OBJECTS {
publicAccessStatus,
publicAccessStatusChangedCause
}
STATUS current
DESCRIPTION "This notification is sent whenever the authentication system
status changes (up or down)."
--#SUMMARY "Authentication system status changed: new status (1=up, 2=down):%d cause:%s"
--#ARGUMENTS { 0, 1 }
--#SEVERITY MAJOR
--#CATEGORY "Colubris Networks Alarms"
::= { publicAccessMIBNotifications 1 }
publicAccessUsersThresholdTrap NOTIFICATION-TYPE
OBJECTS {
publicAccessUsersCount
}
STATUS current
DESCRIPTION "This notification is sent whenever publicAccessUsersThreshold
is exceeded."
--#SUMMARY "Public access users threshold reached: %d user are logged in."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONNAL
--#CATEGORY "Colubris Networks Alarms"
::= { publicAccessMIBNotifications 2 }
publicAccessUsersSessionStartTrap NOTIFICATION-TYPE
OBJECTS {
publicAccessUserName
}
STATUS current
DESCRIPTION "When a user successfully authenticate a trap is
generated if the publicAccessUsersSessionTrapEnabled is set to
True."
--#SUMMARY "Session start for public access user %s"
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONNAL
--#CATEGORY "Colubris Networks Alarms"
::= { publicAccessMIBNotifications 3 }
publicAccessUsersSessionStopTrap NOTIFICATION-TYPE
OBJECTS {
publicAccessUserName
}
STATUS current
DESCRIPTION "When a user terminates their session a trap is generated
if the publicAccessUsersSessionTrapEnabled is set to True."
--#SUMMARY "Session terminated for public access user %s"
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONNAL
--#CATEGORY "Colubris Networks Alarms"
::= { publicAccessMIBNotifications 4 }
publicAccessUsersSessionFailTrap NOTIFICATION-TYPE
OBJECTS {
publicAccessUserName
}
STATUS current
DESCRIPTION "When a user authentication fails a trap is generated
if the publicAccessUsersSessionTrapEnabled is set to True."
--#SUMMARY "Authentication failed for public access user %s"
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONNAL
--#CATEGORY "Colubris Networks Alarms"
::= { publicAccessMIBNotifications 5 }
publicAccessUsersLoggedInTrap NOTIFICATION-TYPE
OBJECTS {
publicAccessUsersCount,
publicAccessUserName,
publicAccessUserStationIpAddress,
publicAccessUserStationMacAddress,
publicAccessUserApMacAddress,
publicAccessUserConnectedInterface,
publicAccessUserSessionDuration,
publicAccessUserBytesReceived,
publicAccessUserBytesSent
}
STATUS current
DESCRIPTION "This is sent when a user is authenticated or periodically
(see publicAccessUSersLoggedInTrapInterval)
if the publicAccessUsersLoggedInTrapEnabled is set to True."
--#SUMMARY "User %s MAC:%s has logged in"
--#ARGUMENTS { 1, 3 }
--#SEVERITY INFORMATIONNAL
::= { publicAccessMIBNotifications 6 }
-- conformance information
colubrisPublicAccessMIBConformance OBJECT IDENTIFIER ::= { colubrisPublicAccessMIB 3 }
colubrisPublicAccessMIBCompliances OBJECT IDENTIFIER ::= { colubrisPublicAccessMIBConformance 1 }
colubrisPublicAccessMIBGroups OBJECT IDENTIFIER ::= { colubrisPublicAccessMIBConformance 2 }
-- compliance statements
colubrisPublicAccessMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for entities which implement
the Colubris Public Access MIB."
MODULE MANDATORY-GROUPS
{
colubrisPublicAccessMIBGroup,
colubrisPublicAccessUserMIBGroup,
colubrisPublicAccessUserConfigMIBGroup,
colubrisPublicAccessNotificationGroup,
colubrisPublicAccessNASPortsMIBGroup
}
::= { colubrisPublicAccessMIBCompliances 1 }
-- units of conformance
colubrisPublicAccessMIBGroup OBJECT-GROUP
OBJECTS {
publicAccessStatus,
publicAccessStatusChangedCause,
publicAccessDeviceUserName,
publicAccessDeviceUserPassword,
publicAccessDeviceSessionTimeoutAdminStatus,
publicAccessDeviceSessionTimeoutOperStatus,
publicAccessDeviceConfigMode,
publicAccessDeviceAuthenProfileIndex,
publicAccessDeviceAccountingEnabled,
publicAccessDeviceAccountingProfileIndex,
publicAccessDeviceForceReconfiguration,
publicAccessUsersMaxCount,
publicAccessUsersCount,
publicAccessUsersThreshold,
publicAccessUsersSessionTrapEnabled,
publicAccessUsersLoggedInTrapEnabled,
publicAccessUsersLoggedInTrapInterval,
publicAccessNASPortCount
}
STATUS current
DESCRIPTION "A collection of objects providing control over the Public
Access MIB."
::= { colubrisPublicAccessMIBGroups 1 }
colubrisPublicAccessUserMIBGroup OBJECT-GROUP
OBJECTS {
publicAccessUserAuthenType,
publicAccessUserAuthenMode,
publicAccessUserState,
publicAccessUserStationIpAddress,
publicAccessUserName,
publicAccessUserSessionStartTime,
publicAccessUserSessionDuration,
publicAccessUserIdleTime,
publicAccessUserBytesSent,
publicAccessUserBytesReceived,
publicAccessUserPacketsSent,
publicAccessUserPacketsReceived,
publicAccessUserForceDisconnection,
publicAccessUserStationMacAddress,
publicAccessUserApMacAddress,
publicAccessUserGroupName,
publicAccessUserSSID,
publicAccessUserSecurity,
publicAccessUserPHYType,
publicAccessUserVLAN,
publicAccessUserApRadioIndex,
publicAccessUserConfigIndex,
publicAccessUserConnectedInterface,
publicAccessUserBytesSentDropped,
publicAccessUserBytesReceivedDropped,
publicAccessUserPacketsSentDropped,
publicAccessUserPacketsReceivedDropped,
publicAccessUserRateLimitationEnabled,
publicAccessUserMaxTransmitRate,
publicAccessUserMaxReceiveRate,
publicAccessUserBandwidthControlLevel,
publicAccessUserNASPort
}
STATUS current
DESCRIPTION "A collection of objects providing the Public Access MIB
capability."
::= { colubrisPublicAccessMIBGroups 2 }
colubrisPublicAccessUserConfigMIBGroup OBJECT-GROUP
OBJECTS {
publicAccessUsersConfigAuthenType,
publicAccessUsersConfigAuthenMode,
publicAccessUsersConfigAuthenProfileIndex,
publicAccessUsersConfigAuthenTimeout,
publicAccessUsersConfigAccountingEnabled,
publicAccessUsersConfigAccountingProfileIndex,
publicAccessUsersConfigInterfaceIndex,
publicAccessUsersConfigVirtualApProfileIndex
}
STATUS current
DESCRIPTION "A collection of objects providing the Public Access user
configuration capability."
::= { colubrisPublicAccessMIBGroups 3 }
colubrisPublicAccessNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
publicAccessStatusChangedTrap,
publicAccessUsersThresholdTrap,
publicAccessUsersSessionStartTrap,
publicAccessUsersSessionStopTrap,
publicAccessUsersSessionFailTrap,
publicAccessUsersLoggedInTrap
}
STATUS current
DESCRIPTION "A collection of supported notifications."
::= { colubrisPublicAccessMIBGroups 4 }
colubrisPublicAccessNASPortsMIBGroup OBJECT-GROUP
OBJECTS {
publicAccessNASPortUserName
}
STATUS current
DESCRIPTION "A collection of objects providing the Public Access
NAS Port MIB capability."
::= { colubrisPublicAccessMIBGroups 5 }
END