mibs/huawei/HUAWEI-ALARM-MIB
-- ==================================================================
-- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI ALARM MIB
-- Reference:
-- Version: V2.17
-- History:
-- V1.0 2009-03-20 publish
-- ==================================================================
HUAWEI-ALARM-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, DateAndTime
FROM SNMPv2-TC;
hwAlarmMIB MODULE-IDENTITY
LAST-UPDATED "201905211501Z" -- May 21, 2019 at 15:01 GMT
ORGANIZATION "Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com"
DESCRIPTION
"The MIB module for creating and deleting bulk files of
SNMP data for file transfer."
REVISION "201905211501Z" -- May 21, 2019 at 15:01 GMT
DESCRIPTION
"Add hwApName node."
REVISION "201804111550Z" -- April 11, 2018 at 15:50 GMT
DESCRIPTION
"Modified hwSnmpTargetAddrExtIndex node."
REVISION "201709200950Z" -- September 20, 2017 at 9:50 GMT
DESCRIPTION
"Add hwAlarmVNFCName for trap."
REVISION "201707141136Z" -- July 14, 2017 at 11:36 GMT
DESCRIPTION
"Revert to the revision 2.10."
REVISION "201702160943Z" -- February 16, 2017 at 9:43 GMT
DESCRIPTION
"Revert to the revision 2.10."
REVISION "201310280943Z" -- October 28, 2013 at 9:43 GMT
DESCRIPTION
"Revert to the revision 2.10."
REVISION "201310181643Z" -- October 18, 2013 at 16:43 GMT
DESCRIPTION
"Add history alarm MIB."
REVISION "200912051150Z" -- December 05, 2009 at 11:50 GMT
DESCRIPTION
"The initial revision of this MIB module ."
::= { hwDatacomm 180 }
--
-- Node definitions
--
hwAlarmObjects OBJECT IDENTIFIER ::= { hwAlarmMIB 1 }
hwSnmpTargetAddrExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSnmpTargetAddrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define snmp target Address extend table."
::= { hwAlarmObjects 1 }
hwSnmpTargetAddrExtEntry OBJECT-TYPE
SYNTAX HwSnmpTargetAddrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the extended snmp target address table."
INDEX { IMPLIED hwSnmpTargetAddrExtIndex }
::= { hwSnmpTargetAddrExtTable 1 }
HwSnmpTargetAddrExtEntry ::=
SEQUENCE {
hwSnmpTargetAddrExtIndex
OCTET STRING,
hwSnmpTargetSlaveAddressList
OCTET STRING,
hwSnmpTargetAddrReliability
INTEGER,
hwSnmpTargetAddrAlarmReliability
INTEGER,
hwSnmpTargetAddrEventReliability
INTEGER,
hwSnmpTargetAddrExtRowStatus
RowStatus
}
hwSnmpTargetAddrExtIndex OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"the extended target address table index."
::= { hwSnmpTargetAddrExtEntry 1 }
hwSnmpTargetSlaveAddressList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Address of slave target host."
::= { hwSnmpTargetAddrExtEntry 2 }
hwSnmpTargetAddrReliability OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enable, then the extend VBs will be added to the alarm parameters. "
DEFVAL { enable }
::= { hwSnmpTargetAddrExtEntry 3 }
hwSnmpTargetAddrAlarmReliability OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Alarm reliability function enable flag."
DEFVAL { enable }
::= { hwSnmpTargetAddrExtEntry 4 }
hwSnmpTargetAddrEventReliability OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Event reliability function enable flag. "
DEFVAL { enable }
::= { hwSnmpTargetAddrExtEntry 5 }
hwSnmpTargetAddrExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of the target extend table."
::= { hwSnmpTargetAddrExtEntry 6 }
hwMinAlarmSyncIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimal index value for alarm synchronization."
::= { hwAlarmObjects 2 }
hwMaxAlarmSyncIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal index value for alarm synchronization. "
::= { hwAlarmObjects 3 }
hwAlarmSyncTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmSyncEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm synchronization table. "
::= { hwAlarmObjects 4 }
hwAlarmSyncEntry OBJECT-TYPE
SYNTAX HwAlarmSyncEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm synchronization table entry."
INDEX { hwSnmpTargetAddrExtIndex, hwAlarmSyncIndex }
::= { hwAlarmSyncTable 1 }
HwAlarmSyncEntry ::=
SEQUENCE {
hwAlarmSyncIndex
Unsigned32,
hwAlarmSyncId
Counter64,
hwAlarmSyncPara
OCTET STRING
}
hwAlarmSyncIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm synchronization index."
::= { hwAlarmSyncEntry 1 }
hwAlarmSyncId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm id "
::= { hwAlarmSyncEntry 2 }
hwAlarmSyncPara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4096))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the information contained
in the binding variable list of the alarm message."
::= { hwAlarmSyncEntry 3 }
hwMinEventSyncIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimal index value for event synchronization."
::= { hwAlarmObjects 5 }
hwMaxEventSyncIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal index value for event synchronization. "
::= { hwAlarmObjects 6 }
hwEventSyncTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEventSyncEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event synchronization table."
::= { hwAlarmObjects 7 }
hwEventSyncEntry OBJECT-TYPE
SYNTAX HwEventSyncEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event synchronization table entry."
INDEX { hwSnmpTargetAddrExtIndex, hwEventSyncIndex }
::= { hwEventSyncTable 1 }
HwEventSyncEntry ::=
SEQUENCE {
hwEventSyncIndex
Unsigned32,
hwEventSyncId
Counter64,
hwEventSyncPara
OCTET STRING
}
hwEventSyncIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event synchronization index value."
::= { hwEventSyncEntry 1 }
hwEventSyncId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The event id."
::= { hwEventSyncEntry 2 }
hwEventSyncPara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4096))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the information contained
in the binding variable list of an event."
::= { hwEventSyncEntry 3 }
hwAlarmActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The active alarm table."
::= { hwAlarmObjects 8 }
hwAlarmActiveEntry OBJECT-TYPE
SYNTAX HwAlarmActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries appear in this table when alarms are raised. They
are removed when the alarm is cleared."
INDEX { hwSnmpTargetAddrExtIndex, hwActiveAlarmIndex }
::= { hwAlarmActiveTable 1 }
HwAlarmActiveEntry ::=
SEQUENCE {
hwActiveAlarmIndex
Unsigned32,
hwActiveAlarmId
Counter64,
hwActiveAlarmPara
OCTET STRING,
hwActiveAlarmRowStatus
RowStatus
}
hwActiveAlarmIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A strictly monotonically increasing integer which acts as the index of all alarms and events.
It wraps back to 1 after it reaches its maximum value."
::= { hwAlarmActiveEntry 1 }
hwActiveAlarmId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of an alarm."
::= { hwAlarmActiveEntry 2 }
hwActiveAlarmPara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4096))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the parameters of an active alarm."
::= { hwAlarmActiveEntry 3 }
hwActiveAlarmRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status."
::= { hwAlarmActiveEntry 4 }
hwEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event table. "
::= { hwAlarmObjects 9 }
hwEventEntry OBJECT-TYPE
SYNTAX HwEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries appear in this table when events are raised."
INDEX { hwSnmpTargetAddrExtIndex, hwEventIndex }
::= { hwEventTable 1 }
HwEventEntry ::=
SEQUENCE {
hwEventIndex
Unsigned32,
hwEventId
Counter64,
hwEventPara
OCTET STRING,
hwEventRowStatus
RowStatus
}
hwEventIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A strictly monotonically increasing integer
which acts as the index of all alarms and events.
It wraps back to 1 after it reaches its maximum value."
::= { hwEventEntry 1 }
hwEventId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the OID of an event."
::= { hwEventEntry 2 }
hwEventPara OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4096))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the parameter information of an event."
::= { hwEventEntry 3 }
hwEventRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status."
::= { hwEventEntry 4 }
hwAlarmDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time when an alarm is generated or cleared."
::= { hwAlarmObjects 18 }
hwAlarmOrEventFlag OBJECT-TYPE
SYNTAX INTEGER
{
alarm(1),
event(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of alarm messages.
1: Alarm
2: Event
"
::= { hwAlarmObjects 19 }
hwAlarmReasonInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for the alarm."
::= { hwAlarmObjects 20 }
hwAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER
{
critical(1),
major(2),
minor(3),
warning(4),
indeterminate(5),
cleared(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm severity."
::= { hwAlarmObjects 25 }
hwAlarmVNFCName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Alarm VNFC name."
::= { hwAlarmObjects 26 }
hwSnmpTargetSyncIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSnmpTargetSyncIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The synchronization index of snmp targets table."
::= { hwAlarmObjects 28 }
hwSnmpTargetSyncIndexEntry OBJECT-TYPE
SYNTAX HwSnmpTargetSyncIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the synchronization index table."
INDEX { hwSnmpTargetAddrExtIndex }
::= { hwSnmpTargetSyncIndexTable 1 }
HwSnmpTargetSyncIndexEntry ::=
SEQUENCE {
hwMinAlmSyncIndex
Unsigned32,
hwMaxAlmSyncIndex
Unsigned32,
hwMinEvtSyncIndex
Unsigned32,
hwMaxEvtSyncIndex
Unsigned32
}
hwMinAlmSyncIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimal index value for alarm synchronization."
::= { hwSnmpTargetSyncIndexEntry 1 }
hwMaxAlmSyncIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal index value for alarm synchronization. "
::= { hwSnmpTargetSyncIndexEntry 2 }
hwMinEvtSyncIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimal index value for event synchronization."
::= { hwSnmpTargetSyncIndexEntry 3 }
hwMaxEvtSyncIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximal index value for event synchronization. "
::= { hwSnmpTargetSyncIndexEntry 4 }
hwAlarmActiveVsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmActiveVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The active alarm management table for LSVS support version. "
::= { hwAlarmObjects 31 }
hwAlarmActiveVsEntry OBJECT-TYPE
SYNTAX HwAlarmActiveVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The active alarm table for VS support version. "
AUGMENTS { hwAlarmActiveEntry }
::= { hwAlarmActiveVsTable 1 }
HwAlarmActiveVsEntry ::=
SEQUENCE {
hwAlarmActiveVsId
Unsigned32
}
hwAlarmActiveVsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VS id of the alarm. "
::= { hwAlarmActiveVsEntry 9 }
hwEventVsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEventVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event table for LSVS support version. "
::= { hwAlarmObjects 33 }
hwEventVsEntry OBJECT-TYPE
SYNTAX HwEventVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event entry."
AUGMENTS { hwEventEntry }
::= { hwEventVsTable 1 }
HwEventVsEntry ::=
SEQUENCE {
hwEventVsId
Unsigned32
}
hwEventVsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VS id of the event. "
::= { hwEventVsEntry 9 }
hwAlarmSyncVsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmSyncVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm synchronization table. "
::= { hwAlarmObjects 36 }
hwAlarmSyncVsEntry OBJECT-TYPE
SYNTAX HwAlarmSyncVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm synchronization table entry."
AUGMENTS { hwAlarmSyncEntry }
::= { hwAlarmSyncVsTable 1 }
HwAlarmSyncVsEntry ::=
SEQUENCE {
hwAlarmSyncVsId
Unsigned32
}
hwAlarmSyncVsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm VS id."
::= { hwAlarmSyncVsEntry 3 }
hwEventSyncVsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEventSyncVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event synchronization table."
::= { hwAlarmObjects 39 }
hwEventSyncVsEntry OBJECT-TYPE
SYNTAX HwEventSyncVsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The event synchronization table entry."
AUGMENTS { hwEventSyncEntry }
::= { hwEventSyncVsTable 1 }
HwEventSyncVsEntry ::=
SEQUENCE {
hwEvevtSyncVsId
Unsigned32
}
hwEvevtSyncVsId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VS id of the event."
::= { hwEventSyncVsEntry 3 }
hwApName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..246))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Alarm AP name."
::= { hwAlarmObjects 40 }
hwAlarmNotifications OBJECT IDENTIFIER ::= { hwAlarmMIB 2 }
hwAlarmTargetHostDel NOTIFICATION-TYPE
OBJECTS { hwSnmpTargetAddrExtIndex }
STATUS current
DESCRIPTION
"The notification for the deletion of the target host. "
::= { hwAlarmNotifications 1 }
hwAlarmStorm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The alarm storm notification."
::= { hwAlarmNotifications 2 }
hwAlarmConformance OBJECT IDENTIFIER ::= { hwAlarmMIB 3 }
hwAlarmCompliances OBJECT IDENTIFIER ::= { hwAlarmConformance 1 }
hwAlarmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the Huawei Alarm mib."
MODULE -- this module
MANDATORY-GROUPS { hwAlarmReliabilityGroup }
::= { hwAlarmCompliances 1 }
hwAlarmGroups OBJECT IDENTIFIER ::= { hwAlarmConformance 2 }
hwAlarmReliabilityGroup OBJECT-GROUP
OBJECTS { hwSnmpTargetSlaveAddressList, hwSnmpTargetAddrEventReliability, hwSnmpTargetAddrAlarmReliability, hwSnmpTargetAddrReliability, hwSnmpTargetAddrExtRowStatus
}
STATUS current
DESCRIPTION
"The objects for alarm reliability and snmp target address list."
::= { hwAlarmGroups 1 }
hwActiveInfoGroup OBJECT-GROUP
OBJECTS { hwActiveAlarmId, hwActiveAlarmPara, hwEventRowStatus, hwActiveAlarmRowStatus, hwEventId,
hwEventPara }
STATUS current
DESCRIPTION
"The nodes for querying the active alarm information."
::= { hwAlarmGroups 7 }
hwTrapInfoSyncGroup OBJECT-GROUP
OBJECTS { hwMinAlarmSyncIndex, hwMaxAlarmSyncIndex, hwAlarmSyncId, hwAlarmSyncPara, hwMinEventSyncIndex,
hwMaxEventSyncIndex, hwEventSyncId, hwEventSyncPara, hwAlarmDateAndTime, hwAlarmCorrAnalyzeSuppressionRootCauseIndication,
hwAlarmCorrAnalyzeSuppressionParentSequence, hwAlarmReasonInfo, hwAlarmSeverity, hwAlarmOrEventFlag }
STATUS current
DESCRIPTION
"All information of trap synchronization."
::= { hwAlarmGroups 8 }
hwActiveInfoVsGroup OBJECT-GROUP
OBJECTS { hwAlarmActiveVsId, hwEventVsId }
STATUS current
DESCRIPTION
"The VS id of the active alarm or event."
::= { hwAlarmGroups 9 }
hwTrapSyncVsGroup OBJECT-GROUP
OBJECTS { hwAlarmSyncVsId, hwEvevtSyncVsId, hwMinAlmSyncIndex, hwMaxAlmSyncIndex, hwMinEvtSyncIndex,
hwMaxEvtSyncIndex }
STATUS current
DESCRIPTION
"The VS id and the synchronization sequence number nodes."
::= { hwAlarmGroups 10 }
hwAlarmTrapInfoGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwAlarmTargetHostDel, hwAlarmStorm }
STATUS current
DESCRIPTION
"Alarm trap nodes."
::= { hwAlarmGroups 11 }
hwTrapSuppressionGroup OBJECT-GROUP
OBJECTS { hwAlarmDelaySuppressionEnable, hwAlarmDelaySuppressionCausePersistPeriod, hwAlarmDelaySuppressionClearPersistPeriod,
hwAlarmCorrAnalyzeSuppressionEnable, hwAlarmCorrAnalyzeSuppressionStatus, hwEventDelaySuppressionEnable, hwEventDelaySuppressionCausePersistPeriod }
STATUS current
DESCRIPTION
"The trap suppression nodes."
::= { hwAlarmGroups 12 }
hwTrapInfoGroup OBJECT-GROUP
OBJECTS { hwAlarmAttrSeverity, hwEventAttrSeverity }
STATUS current
DESCRIPTION
"The basal information of trap nodes."
::= { hwAlarmGroups 13 }
hwAlarmConfig OBJECT IDENTIFIER ::= { hwAlarmMIB 5 }
hwAlarmAttr OBJECT IDENTIFIER ::= { hwAlarmConfig 1 }
hwAlarmAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains attribute of alarms."
::= {hwAlarmAttr 1}
hwAlarmAttrEntry OBJECT-TYPE
SYNTAX HwAlarmAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of hwAlarmAttrTable."
INDEX {hwAlarmName}
::= {hwAlarmAttrTable 1}
HwAlarmAttrEntry::=
SEQUENCE {
hwAlarmName
OCTET STRING,
hwAlarmAttrSeverity
INTEGER
}
hwAlarmName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of registered alarms."
::= { hwAlarmAttrEntry 1 }
hwAlarmAttrSeverity OBJECT-TYPE
SYNTAX INTEGER
{
critical(1),
major(2),
minor(3),
warning(4),
indeterminate(5),
cleared(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of alarms."
::= { hwAlarmAttrEntry 2 }
hwAlarmMask OBJECT IDENTIFIER ::= { hwAlarmConfig 3 }
hwAlarmMaskBasedOnIfnameTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmMaskBasedOnIfnameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define alarm mask table, which is based on interface."
::= {hwAlarmMask 1}
hwAlarmMaskBasedOnIfnameEntry OBJECT-TYPE
SYNTAX HwAlarmMaskBasedOnIfnameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of hwAlarmMaskBasedOnIfnameTable."
INDEX {hwAlarmMaskIfName}
::= {hwAlarmMaskBasedOnIfnameTable 1}
HwAlarmMaskBasedOnIfnameEntry::=
SEQUENCE {
hwAlarmMaskIfName
OCTET STRING,
hwAlarmMaskBasedOnIfnameRowStatus
RowStatus
}
hwAlarmMaskIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface name for alarm mask."
::= { hwAlarmMaskBasedOnIfnameEntry 1 }
hwAlarmMaskBasedOnIfnameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of the alarm mask based on interface table."
::= { hwAlarmMaskBasedOnIfnameEntry 51 }
hwAlarmMaskBasedOnEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmMaskBasedOnEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define alarm mask table, which is based on entity index."
::= {hwAlarmMask 2}
hwAlarmMaskBasedOnEntityEntry OBJECT-TYPE
SYNTAX HwAlarmMaskBasedOnEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of hwAlarmMaskBasedOnEntityTable."
INDEX {hwAlarmMaskEntPhysicalIndex}
::= {hwAlarmMaskBasedOnEntityTable 1}
HwAlarmMaskBasedOnEntityEntry::=
SEQUENCE {
hwAlarmMaskEntPhysicalIndex
Integer32,
hwAlarmMaskEntPhysicalName
OCTET STRING,
hwAlarmMaskBasedOnEntityRowStatus
RowStatus
}
hwAlarmMaskEntPhysicalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical index of entity for alarm mask."
::= { hwAlarmMaskBasedOnEntityEntry 1 }
hwAlarmMaskEntPhysicalName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The physical name of entity for alarm mask."
::= { hwAlarmMaskBasedOnEntityEntry 2 }
hwAlarmMaskBasedOnEntityRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of the alarm mask based on entity table."
::= { hwAlarmMaskBasedOnEntityEntry 51 }
hwAlarmDelay OBJECT IDENTIFIER ::= { hwAlarmConfig 4 }
hwAlarmDelaySuppressionEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch of alarm delay suppression."
DEFVAL { enable }
::= { hwAlarmDelay 1 }
hwAlarmDelaySuppressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmDelaySuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define alarm delay suppression table."
::= { hwAlarmDelay 2 }
hwAlarmDelaySuppressionEntry OBJECT-TYPE
SYNTAX HwAlarmDelaySuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the alarm delay suppression table."
INDEX { hwAlarmName }
::= { hwAlarmDelaySuppressionTable 1 }
HwAlarmDelaySuppressionEntry::=
SEQUENCE {
hwAlarmDelaySuppressionCausePersistPeriod
Integer32,
hwAlarmDelaySuppressionClearPersistPeriod
Integer32
}
hwAlarmDelaySuppressionCausePersistPeriod OBJECT-TYPE
SYNTAX Integer32 (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The cause persist period of alarm delay suppression."
::= { hwAlarmDelaySuppressionEntry 1 }
hwAlarmDelaySuppressionClearPersistPeriod OBJECT-TYPE
SYNTAX Integer32 (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The clear persist period of alarm delay suppression."
::= { hwAlarmDelaySuppressionEntry 2 }
hwAlarmCorrAnalyze OBJECT IDENTIFIER ::= { hwAlarmConfig 5 }
hwAlarmCorrAnalyzeSuppressionEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch of alarm correlation analyze suppression."
DEFVAL { disable }
::= { hwAlarmCorrAnalyze 1 }
hwAlarmCorrAnalyzeSuppressionRootCauseIndication OBJECT-TYPE
SYNTAX INTEGER
{
independent(0),
rootcause(1),
nonrootcause(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If alarm has passed correaltion analysis, this indication is
rootcause or nonrootcause, default is independent."
::= { hwAlarmCorrAnalyze 2 }
hwAlarmCorrAnalyzeSuppressionParentSequence OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parent sequence of alarm, whose indication is nonrootcause."
::= { hwAlarmCorrAnalyze 3 }
hwAlarmCorrAnalyzeSuppressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwAlarmCorrAnalyzeSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define alarm correlation analyze suppression table."
::= { hwAlarmCorrAnalyze 4 }
hwAlarmCorrAnalyzeSuppressionEntry OBJECT-TYPE
SYNTAX HwAlarmCorrAnalyzeSuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of alarm correlation analyze suppression table."
INDEX { hwSnmpTargetAddrExtIndex }
::= { hwAlarmCorrAnalyzeSuppressionTable 1 }
HwAlarmCorrAnalyzeSuppressionEntry ::=
SEQUENCE {
hwAlarmCorrAnalyzeSuppressionStatus
INTEGER
}
hwAlarmCorrAnalyzeSuppressionStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of alarm correlation suppression for each target host."
::= { hwAlarmCorrAnalyzeSuppressionEntry 1 }
hwEventConfig OBJECT IDENTIFIER ::= { hwAlarmMIB 6 }
hwEventAttr OBJECT IDENTIFIER ::= { hwEventConfig 1 }
hwEventAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEventAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains attribute of events."
::= {hwEventAttr 1}
hwEventAttrEntry OBJECT-TYPE
SYNTAX HwEventAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of hwEventAttrTable."
INDEX {hwEventName}
::= {hwEventAttrTable 1}
HwEventAttrEntry::=
SEQUENCE {
hwEventName OCTET STRING,
hwEventAttrSeverity INTEGER
}
hwEventName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of registered events."
::= { hwEventAttrEntry 1 }
hwEventAttrSeverity OBJECT-TYPE
SYNTAX INTEGER
{
critical(1),
major(2),
minor(3),
warning(4),
indeterminate(5),
cleared(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of evens."
::= { hwEventAttrEntry 2 }
hwEventDelay OBJECT IDENTIFIER ::= { hwEventConfig 4 }
hwEventDelaySuppressionEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch of event delay suppression."
DEFVAL { enable }
::= { hwEventDelay 1 }
hwEventDelaySuppressionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEventDelaySuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Define event delay suppression table."
::= { hwEventDelay 2 }
hwEventDelaySuppressionEntry OBJECT-TYPE
SYNTAX HwEventDelaySuppressionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of event delay suppression table."
INDEX { hwEventName }
::= { hwEventDelaySuppressionTable 1 }
HwEventDelaySuppressionEntry::=
SEQUENCE {
hwEventDelaySuppressionCausePersistPeriod
Integer32
}
hwEventDelaySuppressionCausePersistPeriod OBJECT-TYPE
SYNTAX Integer32 (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The cause persist period of event delay suppression."
::= { hwEventDelaySuppressionEntry 1 }
END
--
-- HUAWEI-ALARM-MIB.mib
--