mibs/huawei/HUAWEI-MINM-MIB
-- =================================================================================
-- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved
--
-- Description: This mib file is used for configuration of MINM
-- information.
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 wuchunqiang 60020627, 2006.10.30, publish
-- pengpeng 60021576,2006.10.30
-- yuwei 43165, 2006.11.15
-- xiebojie 60021221 ,2007.05.22
-- zhangyinjuan 64060, 2008.06.18
-- =================================================================================
HUAWEI-MINM-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
InterfaceIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Unsigned32, Counter32, Counter64, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MacAddress, RowStatus, TruthValue, TimeStamp, TEXTUAL-CONVENTION
FROM SNMPv2-TC
VlanIdOrNone, VlanId
FROM Q-BRIDGE-MIB -- [RFC4363]
AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
TransportDomain,TransportAddress
FROM TRANSPORT-ADDRESS-MIB -- [RFC3419]
VlanList
FROM HUAWEI-L2IF-MIB
InterfaceIndexOrZero
FROM IF-MIB;
hwMinMMIB MODULE-IDENTITY
LAST-UPDATED "200611230000Z" -- November 23, 2006 at 00:00 GMT
ORGANIZATION
"Huawei Technologies Co., Ltd."
CONTACT-INFO
"R&D Beijing, Huawei Technologies Co., Ltd.
Huawei Bld., NO.3 Xinxi Rd,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip: 100085
Http://www.huawei.com
E-mail:support@huawei.com"
DESCRIPTION
"The HUAWEI-MINM-MIB contains objects to
Manage configuration for MINM feature.
"
::= { hwMINM 1 }
--
-- type definitions
--
HWAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the administration status as follows:
up(1),
down(2)
"
SYNTAX INTEGER
{
up(1),
down(2)
}
HWOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the operation status as follows:
up(1),
down(2)
"
SYNTAX INTEGER
{
up(1),
down(2)
}
HwDot1agCfmCcmInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interval at which CCMs are sent by a MEP.
The possible values are:
intervalInvalid(1) No CCMs are sent (disabled).
interval300Hz(2) CCMs are sent every 3 1/3 milliseconds
(300Hz).
interval10ms(3) CCMs are sent every 10 milliseconds.
interval100ms(4) CCMs are sent every 100 milliseconds.
interval1s(5) CCMs are sent every 1 second.
interval10s(6) CCMs are sent every 10 seconds.
interval1min(7) CCMs are sent every minute.
interval10min(8) CCMs are sent every 10 minutes.
interval20ms(9) CCMs are sent every 10 milliseconds.
interval30ms(10) CCMs are sent every 10 milliseconds.
interval50ms(11) CCMs are sent every 10 milliseconds.
Note: enumerations start at zero to match the 'CCM Interval
field' protocol field.
"
SYNTAX INTEGER
{
intervalInvalid(1),
interval300Hz(2),
interval10ms(3),
interval100ms(4),
interval1s(5),
interval10s(6),
interval1min(7),
interval10min(8),
interval20ms(9),
interval30ms(10),
interval50ms(11)
}
HwDot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the possible values the Relay action field can take."
REFERENCE
"802.1ag clauses 12.14.7.5.3 g), 20.32.2.5, and Table 21-24.
RlyHit(1) The LTM reached an MP whose MAC address matches the target MAC address.
RlyFDB(2) The Egress Port was determined by consulting the Filtering Database(20.41.1.1:a).
RlyMPDB(3) The Egress Port was determined by consulting the MIP CCM Database(20.41.1.1:b).
"
SYNTAX INTEGER
{
rlyHit(1),
rlyFdb(2),
rlyMpdb(3)
}
HwLldpChassisIdSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a chassis identifier.
The enumeration 'chassisComponent(1)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
The enumeration 'interfaceAlias(2)' represents a chassis
identifier based on the value of ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'portComponent(3)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a port or backplane
component (i.e., entPhysicalClass value of 'port(10)' or
'backplane(4)'), within the containing chassis.
The enumeration 'macAddress(4)' represents a chassis
identifier based on the value of a unicast source address
(encoded in network byte order and IEEE 802.3 canonical bit
order), of a port on the containing chassis as defined in
IEEE Std 802-2001.
The enumeration 'networkAddress(5)' represents a chassis
identifier based on a network address, associated with
a particular chassis. The encoded address is actually
composed of two fields. The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the network
address value.
The enumeration 'interfaceName(6)' represents a chassis
identifier based on the value of ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'local(7)' represents a chassis identifier
based on a locally defined value."
SYNTAX INTEGER {
chassisComponent(1),
interfaceAlias(2),
portComponent(3),
macAddress(4),
networkAddress(5),
interfaceName(6),
local(7)
}
HwLldpChassisId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the format of a chassis identifier string.
Objects of this type are always used with an associated
LldpChassisIdSubtype object, which identifies the format of
the particular LldpChassisId object instance.
If the associated LldpChassisIdSubtype object has a value of
'chassisComponent(1)', then the octet string identifies
a particular instance of the entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
If the associated LldpChassisIdSubtype object has a value
of 'interfaceAlias(2)', then the octet string identifies
a particular instance of the ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifAlias object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value
of 'portComponent(3)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component within
the containing chassis.
If the associated LldpChassisIdSubtype object has a value of
'macAddress(4)', then this string identifies a particular
unicast source address (encoded in network byte order and
IEEE 802.3 canonical bit order), of a port on the containing
chassis as defined in IEEE Std 802-2001.
If the associated LldpChassisIdSubtype object has a value of
'networkAddress(5)', then this string identifies a particular
network address, encoded in network byte order, associated
with one or more ports on the containing chassis. The first
octet contains the IANA Address Family Numbers enumeration
value for the specific address type, and octets 2 through
N contain the network address value in network byte order.
If the associated LldpChassisIdSubtype object has a value
of 'interfaceName(6)', then the octet string identifies
a particular instance of the ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifName object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value of
'local(7)', then this string identifies a locally assigned
Chassis ID."
SYNTAX OCTET STRING (SIZE (1..255))
HwLldpPortIdSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a particular type of port
identifier used in the LLDP MIB.
The enumeration 'interfaceAlias(1)' represents a port
identifier based on the ifAlias MIB object, defined in IETF
RFC 2863.
The enumeration 'portComponent(2)' represents a port
identifier based on the value of entPhysicalAlias (defined in
IETF RFC 2737) for a port component (i.e., entPhysicalClass
value of 'port(10)'), within the containing chassis.
The enumeration 'macAddress(3)' represents a port identifier
based on a unicast source address (encoded in network
byte order and IEEE 802.3 canonical bit order), which has
been detected by the agent and associated with a particular
port (IEEE Std 802-2001).
The enumeration 'networkAddress(4)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port.
The enumeration 'interfaceName(5)' represents a port
identifier based on the ifName MIB object, defined in IETF
RFC 2863.
The enumeration 'agentCircuitId(6)' represents a port
identifier based on the agent-local identifier of the circuit
(defined in RFC 3046), detected by the agent and associated
with a particular port.
The enumeration 'local(7)' represents a port identifier
based on a value locally assigned."
SYNTAX INTEGER {
interfaceAlias(1),
portComponent(2),
macAddress(3),
networkAddress(4),
interfaceName(5),
agentCircuitId(6),
local(7)
}
HwLldpPortId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.
If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863). If the particular ifAlias object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component.
If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802-2001).
If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.
If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863). If the particular ifName object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies a agent-local
identifier of the circuit (defined in RFC 3046).
If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID."
SYNTAX OCTET STRING (SIZE (1..255))
HwLldpManAddrIfSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the basis of a particular type of
interface associated with the management address.
The enumeration 'unknown(1)' represents the case where the
interface is not known.
The enumeration 'ifIndex(2)' represents interface identifier
based on the ifIndex MIB object.
The enumeration 'systemPortNumber(3)' represents interface
identifier based on the system port numbering convention."
REFERENCE
"IEEE 802.1AB-2005 9.5.9.5"
SYNTAX INTEGER {
unknown(1),
ifIndex(2),
systemPortNumber(3)
}
HwLldpManAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of a management address associated with the LLDP
agent that may be used to reach higher layer entities to
assist discovery by network management.
It should be noted that appropriate security credentials,
such as SNMP engineId, may be required to access the LLDP
agent using a management address. These necessary credentials
should be known by the network management and the objects
associated with the credentials are not included in the
LLDP agent."
SYNTAX OCTET STRING (SIZE (1..31))
HwDot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values returned in the ingress action field."
REFERENCE
"802.1ag clauses 12.14.7.5.3 k), 21.9.9.1, 20.35.2.6 and
Table 21-26.
"
SYNTAX INTEGER {
ingOk (1),
ingDown (2),
ingBlocked (3),
ingVid (4)
}
HwDot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Possible values returned in the egress action field"
REFERENCE
"802.1ag clauses 12.14.7.5.3 o), 21.9.10.1 and Table 21-28"
SYNTAX INTEGER {
egrOK (1),
egrDown (2),
egrBlocked (3),
egrVid (4)
}
HWApsInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Indicates the time interval for fast sending of Aps packets described in the G.8031.
By default, it is 3.3 ms.
Optional values for sending interval are as follows:
apsInterval3dot3ms(1): indicates a sending interval of 3.3 ms.
apsInterval5ms(2): indicates a sending interval of 5 ms.
apsInterval10ms(3): indicates a sending interval of 10 ms.
apsInterval15ms(4): indicates a sending interval of 15 ms.
apsInterval20ms(5): indicates a sending interval of 20 ms.
apsInterval30ms(6): indicates a sending interval of 30 ms.
"
SYNTAX INTEGER
{
apsInterval3dot3ms(1),
apsInterval5ms(2),
apsInterval10ms(3),
apsInterval15ms(4),
apsInterval20ms(5),
apsInterval30ms(6)
}
HWProtectMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels.
oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends
oneplusoneunidirectional(2): 1 + 1 switchover protection modes on a single end
onetoone(3): 1:1 protection mode
By the default, the 1:1 protection mode is used.
"
SYNTAX INTEGER
{
onePlusOneBidirectional(1),
onePlusOneUnidirectional(2),
oneToOne(3)
}
HWSwitchOperation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the switchover commands for the Aps protection group of mac-tunnels.
The priority levels in a descending order are: clear, lock, force and manual.
clear(1): clears the lock, force and manual commands, and WTR state on the local end.
After the local commands are cleared, the WTR state cannot be entered.
lock(2): locks the services on the working tunnel.
force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state.
manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state.
null(5):there is not manual commands.
"
SYNTAX INTEGER
{
clear(1),
lock(2),
force(3),
manual(4),
null(5)
}
HWProtectProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the protection protocol of the protection group of mac-tunnels.
protocolAps(1): use an APS protocol to enhance the protection switching.
protocolOam(2): not using any APS protocol to enhance the protection switching.
By the default, the Protocol OAM is used.
"
SYNTAX INTEGER
{
protocolAps(1),
protocolOam(2)
}
HWServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the type of a service instance as follows:
p2p(1): indicates the type of a point-to-point service instance.
mp2mp(2): indicates the type of a multi-point to multi-point service instance.
By default, the service type is mp2mp.
"
SYNTAX INTEGER
{
p2p(1),
mp2mp(2)
}
HWInterfaceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the interface type of a service instance.
The encApsulation mapping modes of the service instance can be configured as follows:
transparent(1): indicates the transparent transmission mode.
oneToOne(2): indicates the one-to-one in the s-tagged mode.
bundling(3): indicates the bundling in the s-tagged mode.
By default, the s-tagged bundling mode is used.
"
SYNTAX INTEGER
{
transparent(1),
oneToOne(2),
bundling(3)
}
HWProcessBehavior ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the processing behavior of packets as follows:
discard(1),
forward(2)
"
SYNTAX INTEGER
{
discard(1),
forward(2)
}
HWStaticMacFwdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Indicates the type of the static MAC forwarding table of a service instance:
static(1): indicates a static entry.
blackhole(2): indicates a blackhole entry.
"
SYNTAX INTEGER
{
static(1),
blackhole(2)
}
HwDot1agCfmMepIdOrZero ::= TEXTUAL-CONVENTION
DISPLAY-HINT
"d"
STATUS current
DESCRIPTION
"Indicates the Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
The special value 0 is allowed to indicate special cases, for
example that no MEPID is configured in a given Maintenance
Association point.
Whenever an object is defined with this SYNTAX, then the
DESCRIPTION clause of such an object MUST specify what the
special value of 0 means.
"
SYNTAX Unsigned32 (0 | 1..8191)
--
-- end of type definitions
--
--
-- Node definitions
--
hwMINM OBJECT IDENTIFIER ::= { hwDatacomm 133 }
hwMinMObjects OBJECT IDENTIFIER ::= { hwMinMMIB 1 }
hwMinMSystemObjects OBJECT IDENTIFIER ::= { hwMinMObjects 1 }
hwMinMVirtualMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the virtual MAC address of the device.
By default, there is no virtual MAC address."
::= { hwMinMSystemObjects 1 }
hwMinMMacTnlBVlanListLow OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the starting value of the backbone VLAN that is assigned to the mac-tunnel."
::= { hwMinMSystemObjects 2 }
hwMinMMacTnlBVlanListHigh OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ending value of the backbone VLAN that is assigned to the mac-tunnel."
::= { hwMinMSystemObjects 3 }
hwMinMTrapEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that the Snmp-Agent Trap is enabled on the Mac-in-Mac.By default, it is disable."
DEFVAL { 2 }
::= { hwMinMSystemObjects 4 }
hwMinMMacTnlObjects OBJECT IDENTIFIER ::= { hwMinMObjects 2 }
hwMinMMacTnlCfgObjects OBJECT IDENTIFIER ::= { hwMinMMacTnlObjects 1 }
hwMinMMacTnlIndexNext OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Index of the Next Mac Tunnel.It begins with one."
::= { hwMinMMacTnlCfgObjects 1 }
hwMinMMacTnlCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates a configuration information table of Mac-tunnel."
::= { hwMinMMacTnlCfgObjects 2 }
hwMinMMacTnlCfgEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the entry in the tunnel configuration table of the mac-tunnel."
INDEX { hwMinMMacTnlIndex }
::= { hwMinMMacTnlCfgTable 1 }
HwMinMMacTnlCfgEntry ::=
SEQUENCE {
hwMinMMacTnlIndex
Unsigned32,
hwMinMMacTnlName
OCTET STRING,
hwMinMMacTnlDMac
MacAddress,
hwMinMMacTnlBVlanID
VlanIdOrNone,
hwMinMMacTnlBVlanType
OCTET STRING,
hwMinMMacTnlPriorityValue
Integer32,
hwMinMMacTnlOutgoingIfIndex
InterfaceIndexOrZero,
hwMinMMacTnlSplitHorizonEnable
EnabledStatus,
hwMinMMacTnlAdminStatus
HWAdminStatus,
hwMinMMacTnlOperStatus
HWOperStatus,
hwMinMMacTnlDescription
OCTET STRING,
hwMinMMacTnlStatisticsReset
EnabledStatus,
hwMinMMacTnlPriorityTrustITag
TruthValue,
hwMinMMacTnlDeiTrustIDei
TruthValue,
hwMinMMacTnlDeiValue
Integer32,
hwMinMMacTnlRowStatus
RowStatus
}
hwMinMMacTnlIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of Mac Tunnel. It begins with one."
::= { hwMinMMacTnlCfgEntry 1 }
hwMinMMacTnlName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte."
::= { hwMinMMacTnlCfgEntry 11 }
hwMinMMacTnlDMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the remote MAC address of the current mac-tunnel.
By default, there is no such configuration."
::= { hwMinMMacTnlCfgEntry 12 }
hwMinMMacTnlBVlanID OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates BVLAN value of the current BVLAN used by the mac-tunnel: It ranges from 1 to 4094. By default, BVLAN value is not configured.
The VLAN here must have been created and be in the backbone VLAN used by the mac-tunnel.
The special value of zero is used to indicate that no VLAN-ID is present or used.
"
::= { hwMinMMacTnlCfgEntry 13 }
hwMinMMacTnlBVlanType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates the B-TAG type of the BVLAN. By default, it is 88a8.
"
::= { hwMinMMacTnlCfgEntry 14 }
hwMinMMacTnlPriorityValue OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates priority level of the mac-tunnel.
It is used to set the priority field of B-TAG.
There are eight priority levels. By default, the I-TAG priority is used.
The special value of eight is used to indicate that priority was unknown or none.
"
::= { hwMinMMacTnlCfgEntry 15 }
hwMinMMacTnlOutgoingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the port used in the mac-tunnel. By default, it is not configured.
The value zero is used to indicate that interface was unknown or none."
::= { hwMinMMacTnlCfgEntry 16 }
hwMinMMacTnlSplitHorizonEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the split horizon of tunnels. By default, it is enabled.
When split horizon is enabled on two mac-tunnels, the two tunnels cannot exchange packets.
"
::= { hwMinMMacTnlCfgEntry 17 }
hwMinMMacTnlAdminStatus OBJECT-TYPE
SYNTAX HWAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the administration status of the mac-tunnel."
::= { hwMinMMacTnlCfgEntry 18 }
hwMinMMacTnlOperStatus OBJECT-TYPE
SYNTAX HWOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the physical state of the mac-tunnel."
::= { hwMinMMacTnlCfgEntry 19 }
hwMinMMacTnlDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates descriptive information of the static Mac-In-Mac tunnel.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.
"
::= { hwMinMMacTnlCfgEntry 20 }
hwMinMMacTnlStatisticsReset OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the reset on traffic statistics of the mac-tunnel."
::= { hwMinMMacTnlCfgEntry 21 }
hwMinMMacTnlPriorityTrustITag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the I-TAG priority is copied to the mac-tunnel.
By default, the I-TAG priority is not copied to the mac-tunnel."
DEFVAL { 2 }
::= { hwMinMMacTnlCfgEntry 22 }
hwMinMMacTnlDeiTrustIDei OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the I-DEI priority is copied to the mac-tunnel.
By default, the I-DEI priority is not copied to the mac-tunnel."
DEFVAL { 2 }
::= { hwMinMMacTnlCfgEntry 23 }
hwMinMMacTnlDeiValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates DEI of the mac-tunnel. It is used to set the DEI field of B-TAG.
When DEI is true, the value is set to 1.
When DEI is false, the value is set to 0.
By default, the I-DEI priority is not copied to the mac-tunnel, and the DEI is false.
When the value of the DEI is set to 2, it indicates that no DEI
is configured on the tunnel. "
DEFVAL { 0 }
::= { hwMinMMacTnlCfgEntry 24 }
hwMinMMacTnlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy"
::= { hwMinMMacTnlCfgEntry 51 }
hwMinMMacTnlStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates a query for the hwMinMMacTnlStatisticsTable of the mac-tunnel. "
::= { hwMinMMacTnlCfgObjects 3 }
hwMinMMacTnlStatisticsEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates an entry query for the hwMinMMacTnlStatisticsTable of the mac-tunnel."
INDEX { hwMinMMacTnlIndex }
::= { hwMinMMacTnlStatisticsTable 1 }
HwMinMMacTnlStatisticsEntry ::=
SEQUENCE {
hwMinMMacTnlInPackets
Counter64,
hwMinMMacTnlInBytes
Counter64,
hwMinMMacTnlOutPackets
Counter64,
hwMinMMacTnlOutBytes
Counter64
}
hwMinMMacTnlInPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of packets received by the mac-tunnel. "
::= { hwMinMMacTnlStatisticsEntry 11 }
hwMinMMacTnlInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bytes received by the mac-tunnel."
::= { hwMinMMacTnlStatisticsEntry 12 }
hwMinMMacTnlOutPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of packets sent by the mac-tunnel. "
::= { hwMinMMacTnlStatisticsEntry 13 }
hwMinMMacTnlOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bytes sent by the mac-tunnel."
::= { hwMinMMacTnlStatisticsEntry 14 }
hwMacTnlNameToIndexMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMacTnlNameToIndexMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the mapping table of the tunnel name and tunnel index."
::= { hwMinMMacTnlCfgObjects 4 }
hwMacTnlNameToIndexMappingEntry OBJECT-TYPE
SYNTAX HwMacTnlNameToIndexMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the mapping table entry of the tunnel name and tunnel index."
INDEX { hwMacTnlName }
::= { hwMacTnlNameToIndexMappingTable 1 }
HwMacTnlNameToIndexMappingEntry ::=
SEQUENCE {
hwMacTnlName
OCTET STRING,
hwMacTnlIndex
Unsigned32
}
hwMacTnlName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte. "
::= { hwMacTnlNameToIndexMappingEntry 1 }
hwMacTnlIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the tunnel index.It begins with one."
::= { hwMacTnlNameToIndexMappingEntry 11 }
hwMinMMacTnlOamObjects OBJECT IDENTIFIER ::= { hwMinMMacTnlObjects 2 }
hwMinMMacTnlCCTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlCCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the parameters used to describe CC packets.
"
::= { hwMinMMacTnlOamObjects 1 }
hwMinMMacTnlCCEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlCCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the CC table entry."
INDEX { hwMinMMacTnlIndex }
::= { hwMinMMacTnlCCTable 1 }
HwMinMMacTnlCCEntry ::=
SEQUENCE {
hwMinMMacTnlCfmEnable
EnabledStatus,
hwMinMMacTnlCCInterval
HwDot1agCfmCcmInterval,
hwMinMMacTnlSomeRMepCcmDefect
TruthValue,
hwMinMMacTnlSomeRdiDefect
TruthValue,
hwMinMMacTnlCcReceiveEnabled
TruthValue,
hwMinMMacTnlCCRowStatus
RowStatus
}
hwMinMMacTnlCfmEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that CFM is enabled."
::= { hwMinMMacTnlCCEntry 11 }
hwMinMMacTnlCCInterval OBJECT-TYPE
SYNTAX HwDot1agCfmCcmInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the time interval of CC packets."
DEFVAL { 3 }
::= { hwMinMMacTnlCCEntry 12 }
hwMinMMacTnlSomeRMepCcmDefect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates a connectivity failure of tunnels."
::= { hwMinMMacTnlCCEntry 13 }
hwMinMMacTnlSomeRdiDefect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the RDI packet from the remote end is received."
::= { hwMinMMacTnlCCEntry 14 }
hwMinMMacTnlCcReceiveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether CC reception is enabled."
::= { hwMinMMacTnlCCEntry 15 }
hwMinMMacTnlCCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status."
::= { hwMinMMacTnlCCEntry 51 }
hwMinMMacTnlLbTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlLbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the parameters used to describe Lb packets."
::= { hwMinMMacTnlOamObjects 2 }
hwMinMMacTnlLbEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlLbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the loopback table entry."
INDEX { hwMinMMacTnlIndex }
::= { hwMinMMacTnlLbTable 1 }
HwMinMMacTnlLbEntry ::=
SEQUENCE {
hwMinMMacTnlLbmEnable
EnabledStatus,
hwMinMMacTnlLbmTimeStamp
TimeStamp,
hwMinMMacTnlLbmTimeOut
Integer32,
hwMinMMacTnlLbmTimes
Integer32,
hwMinMMacTnlLbmSize
Integer32,
hwMinMMacTnlLbrIn
Counter32,
hwMinMMacTnlLbmResult
TruthValue,
hwMinMMacTnlLbRowStatus
RowStatus
}
hwMinMMacTnlLbmEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates that the MAC Ping is started inside the tunnel.
"
::= { hwMinMMacTnlLbEntry 11 }
hwMinMMacTnlLbmTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operation time."
::= { hwMinMMacTnlLbEntry 12 }
hwMinMMacTnlLbmTimeOut OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the timeout period entered by a user, in ms. By default, it is 2000."
DEFVAL { 2000 }
::= { hwMinMMacTnlLbEntry 13 }
hwMinMMacTnlLbmTimes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates the number of times that Ping is entered.
"
::= { hwMinMMacTnlLbEntry 14 }
hwMinMMacTnlLbmSize OBJECT-TYPE
SYNTAX Integer32 (64..1480)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates the size of an Lbm packet.
"
DEFVAL { 64 }
::= { hwMinMMacTnlLbEntry 15 }
hwMinMMacTnlLbrIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of valid LBR packets received "
::= { hwMinMMacTnlLbEntry 16 }
hwMinMMacTnlLbmResult OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Whether the MAC ping operation for a tunnel is over.
"
::= { hwMinMMacTnlLbEntry 17 }
hwMinMMacTnlLbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status."
::= { hwMinMMacTnlLbEntry 51 }
hwMinMMacTnlLbResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlLbResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Performance statistics returned by using the MAC ping command for a tunnel.
"
::= { hwMinMMacTnlOamObjects 3 }
hwMinMMacTnlLbResultEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlLbResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the loopback table entry."
INDEX { hwMinMMacTnlIndex }
::= { hwMinMMacTnlLbResultTable 1 }
HwMinMMacTnlLbResultEntry ::=
SEQUENCE {
hwMinMMacTnlMacPingRTTMin
Gauge32,
hwMinMMacTnlMacPingRTTMax
Gauge32,
hwMinMMacTnlMacPingRTTAvg
Gauge32,
hwMinMMacTnlMacPingPacketLossRatio
Gauge32
}
hwMinMMacTnlMacPingRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The minimum round trip time.
"
::= { hwMinMMacTnlLbResultEntry 11 }
hwMinMMacTnlMacPingRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The maximum round trip time.
"
::= { hwMinMMacTnlLbResultEntry 12 }
hwMinMMacTnlMacPingRTTAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The average round trip time.
"
::= { hwMinMMacTnlLbResultEntry 13 }
hwMinMMacTnlMacPingPacketLossRatio OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The packet loss ratio.
"
::= { hwMinMMacTnlLbResultEntry 14 }
hwMinMMacTnlLtmTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlLtmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the parameters used to describe Ltm packets. "
::= { hwMinMMacTnlOamObjects 4 }
hwMinMMacTnlLtmEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlLtmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the linktrace table entry."
INDEX { hwMinMMacTnlIndex }
::= { hwMinMMacTnlLtmTable 1 }
HwMinMMacTnlLtmEntry ::=
SEQUENCE {
hwMinMMacTnlLtmEnable
EnabledStatus,
hwMinMMacTnlLtmTimeStamp
TimeStamp,
hwMinMMacTnlLtmTimeOut
Integer32,
hwMinMMacTnlLtmFlags
BITS,
hwMinMMacTnlLtmTtl
Unsigned32,
hwMinMMacTnlLtmSeqNumber
Unsigned32,
hwMinMMacTnlLtmEgressIdentifier
Unsigned32,
hwMinMMacTnlLtmResult
TruthValue,
hwMinMMacTnlLtmRowStatus
RowStatus
}
hwMinMMacTnlLtmEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates that the MAC Trace is started inside the tunnel.
"
::= { hwMinMMacTnlLtmEntry 11 }
hwMinMMacTnlLtmTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time stamp for enabling the MAC trace operation for a tunnel.
"
::= { hwMinMMacTnlLtmEntry 12 }
hwMinMMacTnlLtmTimeOut OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates the timeout period entered by a user, in ms. By default, it is 2000.
"
DEFVAL { 2000 }
::= { hwMinMMacTnlLtmEntry 13 }
hwMinMMacTnlLtmTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates the living cycle of Ltm packets.
"
DEFVAL { 64 }
::= { hwMinMMacTnlLtmEntry 14 }
hwMinMMacTnlLtmFlags OBJECT-TYPE
SYNTAX BITS {
useFDBonly (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The flags field of an LTM packet.
"
DEFVAL { {useFDBonly } }
::= { hwMinMMacTnlLtmEntry 15 }
hwMinMMacTnlLtmSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The sequence number of an LTM packet.
"
::= { hwMinMMacTnlLtmEntry 16 }
hwMinMMacTnlLtmEgressIdentifier OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the egress ID of Ltm packets."
::= { hwMinMMacTnlLtmEntry 17 }
hwMinMMacTnlLtmResult OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Two conditions are used to determine whether the MAC trace operation to a tunnel is over: (1) The peer of a tunnel has been traced. (2) The preset timer for timeout is triggered.
Either condition indicates the completion of an operation.
"
::= { hwMinMMacTnlLtmEntry 18 }
hwMinMMacTnlLtmRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status."
::= { hwMinMMacTnlLtmEntry 51 }
hwMinMMacTnlLtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlLtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the parameters used to describe Ltr packets. "
::= { hwMinMMacTnlOamObjects 5 }
hwMinMMacTnlLtrEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlLtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the linktraceRelay table entry."
INDEX { hwMinMMacTnlIndex,
hwMinMMacTnlLtrSeqNumber,
hwMinMMacTnlLtrReceiveOrder }
::= { hwMinMMacTnlLtrTable 1 }
HwMinMMacTnlLtrEntry ::=
SEQUENCE {
hwMinMMacTnlLtrSeqNumber Unsigned32,
hwMinMMacTnlLtrReceiveOrder Unsigned32,
hwMinMMacTnlLtrTtl Unsigned32,
hwMinMMacTnlLtrForwarded TruthValue,
hwMinMMacTnlLtrLastEgressIdentifier OCTET STRING,
hwMinMMacTnlLtrNextEgressIdentifier OCTET STRING,
hwMinMMacTnlLtrRelay HwDot1agCfmRelayActionFieldValue,
hwMinMMacTnlLtrIngress HwDot1agCfmIngressActionFieldValue,
hwMinMMacTnlLtrIngressMac MacAddress,
hwMinMMacTnlLtrIngressPortIdSubtype HwLldpPortIdSubtype,
hwMinMMacTnlLtrIngressPortId HwLldpPortId,
hwMinMMacTnlLtrEgress HwDot1agCfmEgressActionFieldValue,
hwMinMMacTnlLtrEgressMac MacAddress,
hwMinMMacTnlLtrEgressPortIdSubtype HwLldpPortIdSubtype,
hwMinMMacTnlLtrEgressPortId HwLldpPortId
}
hwMinMMacTnlLtrSeqNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the parameters used to describe Ltr packets.
"
::= { hwMinMMacTnlLtrEntry 1}
hwMinMMacTnlLtrReceiveOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value.
"
REFERENCE
"802.1ag clause 12.14.7.5.2"
::= { hwMinMMacTnlLtrEntry 2 }
hwMinMMacTnlLtrTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TTL field value for a returned LTR."
::= { hwMinMMacTnlLtrEntry 11 }
hwMinMMacTnlLtrForwarded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates an identifier that shows whether the LTM packet should be forwarded to the next hop.
"
::= { hwMinMMacTnlLtrEntry 12 }
hwMinMMacTnlLtrLastEgressIdentifier OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LTR packet is a response packet to a LTM packet.
The LTM packet is the last packet sent by a port on a device.
This variable indicates the port identifier of the LTM packet.
The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively."
::= { hwMinMMacTnlLtrEntry 13 }
hwMinMMacTnlLtrNextEgressIdentifier OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the LTM packet needs to be forwarded to the next hop, the port identifier of the next hop should be added to the TVL field in the response LTR packet. The last six bytes indicate the MAC address, and the first two bytes represent the board number and outbound port number respectively."
::= { hwMinMMacTnlLtrEntry 14 }
hwMinMMacTnlLtrRelay OBJECT-TYPE
SYNTAX HwDot1agCfmRelayActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value in the Relay Action field."
::= { hwMinMMacTnlLtrEntry 15 }
hwMinMMacTnlLtrIngress OBJECT-TYPE
SYNTAX HwDot1agCfmIngressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value returned in the Ingress Action Field of the LTM."
::= { hwMinMMacTnlLtrEntry 16 }
hwMinMMacTnlLtrIngressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address returned in the ingress MAC address field."
::= { hwMinMMacTnlLtrEntry 17 }
hwMinMMacTnlLtrIngressPortIdSubtype OBJECT-TYPE
SYNTAX HwLldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of the Ingress Port ID."
::= { hwMinMMacTnlLtrEntry 18 }
hwMinMMacTnlLtrIngressPortId OBJECT-TYPE
SYNTAX HwLldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ingress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrIngressPortIdSubtype object.
"
::= { hwMinMMacTnlLtrEntry 19 }
hwMinMMacTnlLtrEgress OBJECT-TYPE
SYNTAX HwDot1agCfmEgressActionFieldValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value returned in the Egress Action Field of the LTM."
::= { hwMinMMacTnlLtrEntry 20 }
hwMinMMacTnlLtrEgressMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address returned in the egress MAC address field."
::= { hwMinMMacTnlLtrEntry 21 }
hwMinMMacTnlLtrEgressPortIdSubtype OBJECT-TYPE
SYNTAX HwLldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of the egress Port ID."
::= { hwMinMMacTnlLtrEntry 22 }
hwMinMMacTnlLtrEgressPortId OBJECT-TYPE
SYNTAX HwLldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Egress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrEgressPortIdSubtype object.
"
::= { hwMinMMacTnlLtrEntry 23 }
hwMinMMacTnlApsObjects OBJECT IDENTIFIER ::= { hwMinMMacTnlObjects 3 }
hwMinMMacTnlApsCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMMacTnlApsCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration table for the Aps protection of the mac-tunnel."
::= { hwMinMMacTnlApsObjects 1 }
hwMinMMacTnlApsCfgEntry OBJECT-TYPE
SYNTAX HwMinMMacTnlApsCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration table entry for the Aps protection of the mac-tunnel. "
INDEX { hwMinMMacTnlIndex }
::= { hwMinMMacTnlApsCfgTable 1 }
HwMinMMacTnlApsCfgEntry ::=
SEQUENCE {
hwMinMProtectMacTnlIndex
Unsigned32,
hwMinMProtectMacTnlName
OCTET STRING,
hwMinMProtectMacTnlDMac
MacAddress,
hwMinMProtectMacTnlBVlanID
VlanId,
hwMinMProtectApsSwitchMode
HWProtectMode,
hwMinMProtectProtocolApsEnable
EnabledStatus,
hwMinMProtectApsFastInterval
HWApsInterval,
hwMinMProtectHoldoffTime
Integer32,
hwMinMProtectRevMode
EnabledStatus,
hwMinMProtectRevWtrTime
Integer32,
hwMinMProtectSwitchOperation
HWSwitchOperation,
hwMinMProtectProtocol
HWProtectProtocol,
hwMinMProtectRowStatus
RowStatus
}
hwMinMProtectMacTnlIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of ProtectMacTunnel. It begins with one."
::= { hwMinMMacTnlApsCfgEntry 11 }
hwMinMProtectMacTnlName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the tunnel name of the protective mac-tunnel."
::= { hwMinMMacTnlApsCfgEntry 12 }
hwMinMProtectMacTnlDMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remote MAC address of the protecting mac-tunnel."
::= { hwMinMMacTnlApsCfgEntry 13 }
hwMinMProtectMacTnlBVlanID OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094."
::= { hwMinMMacTnlApsCfgEntry 14 }
hwMinMProtectApsSwitchMode OBJECT-TYPE
SYNTAX HWProtectMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels.
oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends
oneplusoneunidirectional(2): 1 + 1 switchover protection modes on a single end
onetoone(3): 1:1 protection mode
By the default, the 1:1 protection mode is used.
"
DEFVAL { 3 }
::= { hwMinMMacTnlApsCfgEntry 15 }
hwMinMProtectProtocolApsEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled.
By default, the protocol is disabled.
"
DEFVAL { 2 }
::= { hwMinMMacTnlApsCfgEntry 16 }
hwMinMProtectApsFastInterval OBJECT-TYPE
SYNTAX HWApsInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Indicates the configuration of fast sending time interval for each protection group.
The time intervals for fast sending of Aps packets described in the G.8031 are as follows:
By default, the time interval for fast sending of Aps packets in G.8031 is 3.3 ms.
Optional values for sending interval are as follows:
ApsInterval3dot3ms(1): indicates a sending interval of 3.3 ms.
ApsInterval5ms(3): indicates a sending interval of 5 ms.
ApsInterval10ms(3): indicates a sending interval of 10 ms.
ApsInterval5ms(4): indicates a sending interval of 15 ms.
ApsInterval20ms(5): indicates a sending interval of 20 ms.
ApsInterval30ms(6): indicates a sending interval of 30 ms."
DEFVAL { 1 }
::= { hwMinMMacTnlApsCfgEntry 17 }
hwMinMProtectHoldoffTime OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms.
It ranges from 0 to 100.
By default, the switchover restoration time is not delayed. The value of delay is zero.
"
DEFVAL { 0 }
::= { hwMinMMacTnlApsCfgEntry 18 }
hwMinMProtectRevMode OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels."
::= { hwMinMMacTnlApsCfgEntry 19 }
hwMinMProtectRevWtrTime OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels.
By default, the switchover mode is restoration. The restoration time is five minutes."
DEFVAL { 5 }
::= { hwMinMMacTnlApsCfgEntry 20 }
hwMinMProtectSwitchOperation OBJECT-TYPE
SYNTAX HWSwitchOperation
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the switchover commands for the Aps protection group of mac-tunnels.
The priority levels in a descending order are: clear, lock, force and manual.
clear(1): clears the lock, force and manual commands, and WTR state on the local end.
After the local commands are cleared, the WTR state cannot be entered.
lock(2): locks the services on the working tunnel.
force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state.
manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state.
null(5):there is not manual commands."
::= { hwMinMMacTnlApsCfgEntry 21 }
hwMinMProtectProtocol OBJECT-TYPE
SYNTAX HWProtectProtocol
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the protection protocol of the protection group of mac-tunnels.
ProtocolAPS(1): use an APS protocol to enhance the protection switching.
ProtocolOAM(2): not using any APS protocol to enhance the protection switching.
By the default, the ProtocolOAM is used.
"
::= { hwMinMMacTnlApsCfgEntry 22 }
hwMinMProtectRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy"
::= { hwMinMMacTnlApsCfgEntry 51 }
hwMinMSIObjects OBJECT IDENTIFIER ::= { hwMinMObjects 3 }
hwMinMSIIndexNext OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of the next Service Instance. It begins with one."
::= { hwMinMSIObjects 1 }
hwMinMSICfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMSICfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration table of a service instance."
::= { hwMinMSIObjects 2 }
hwMinMSICfgEntry OBJECT-TYPE
SYNTAX HwMinMSICfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration table entry of a service instance."
INDEX { hwMinMSIIndex }
::= { hwMinMSICfgTable 1 }
HwMinMSICfgEntry ::=
SEQUENCE {
hwMinMSIIndex
Unsigned32,
hwMinMSIID
Integer32,
hwMinMSIName
OCTET STRING,
hwMinMSIServiceType
HWServiceType,
hwMinMSIPriorityTrust8021p
TruthValue,
hwMinMSIPriorityValue
Integer32,
hwMinMSIInterfaceType
HWInterfaceType,
hwMinMSIAdminStatus
HWAdminStatus,
hwMinMSIOperStatus
HWOperStatus,
hwMinMSIMacLearningEnable
EnabledStatus,
hwMinMSIMacLimitAction
HWProcessBehavior,
hwMinMSIMacLimitAlarm
EnabledStatus,
hwMinMSIMacLimitMaxinum
Integer32,
hwMinMSIL2CtrlProProcess
BITS,
hwMinMSIUnknownUnicastEnbale
EnabledStatus,
hwMinMSIMulticastEnable
EnabledStatus,
hwMinMSIBroadcastEnable
EnabledStatus,
hwMinMSIDescription
OCTET STRING,
hwMinMSIStatisticsEnable
EnabledStatus,
hwMinMSIStatisticsReset
EnabledStatus,
hwMinMSIFcsTransparentEnable
EnabledStatus,
hwMinMSIIngressPriorityValue
Integer32,
hwMinMSIEgressPriorityTrustBTag
TruthValue,
hwMinMSIIngressDeiValue
Integer32,
hwMinMSIEgressDeiTrustBDei
TruthValue,
hwMinMSIIsolateAll
EnabledStatus,
hwMinMSIRowStatus
RowStatus
}
hwMinMSIIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Index of Service Instance.It begins with one."
::= { hwMinMSICfgEntry 1 }
hwMinMSIID OBJECT-TYPE
SYNTAX Integer32 (0..16777216)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the ID of a service instance. It can be any value within 24 bits.
By default, the value is null.
One ID can be configured to one service instance only.
"
::= { hwMinMSICfgEntry 11 }
hwMinMSIName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
"
::= { hwMinMSICfgEntry 12 }
hwMinMSIServiceType OBJECT-TYPE
SYNTAX HWServiceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the type of a service instance as follows:
p2p: indicates the type of a point-to-point service instance.
mp2mp: indicates the type of a multi-point to multi-point service instance.
By default, the service type is mp2mp.
"
DEFVAL { 2 }
::= { hwMinMSICfgEntry 13 }
hwMinMSIPriorityTrust8021p OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the priority of user packet based on 802.1Q is trusted.
By default, no user priority is trusted.
"
DEFVAL { 2 }
::= { hwMinMSICfgEntry 14 }
hwMinMSIPriorityValue OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates priority level of a service instance.
It is used to set the priority field of I-TAG.
By default, no user priority is trusted and the priority is zero.
The special value of eight is used to indicate that priority of user is trusted.
"
DEFVAL { 0 }
::= { hwMinMSICfgEntry 15 }
hwMinMSIInterfaceType OBJECT-TYPE
SYNTAX HWInterfaceType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the interface type of a service instance.
transparent: indicates the transparent transmission mode.
one-to-one: indicates the one-to-one in the s-tagged mode.
bundling: indicates the bundling in the s-tagged mode.
By default, the s-tagged bundling mode is used.
"
DEFVAL { 3}
::= { hwMinMSICfgEntry 16 }
hwMinMSIAdminStatus OBJECT-TYPE
SYNTAX HWAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the administration status of a service instance."
::= { hwMinMSICfgEntry 17 }
hwMinMSIOperStatus OBJECT-TYPE
SYNTAX HWOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the physical status of a service instance."
::= { hwMinMSICfgEntry 18 }
hwMinMSIMacLearningEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Disable the MAC learning of a service instance. By default, the MAC learning is enabled.
This object applies to the service instance of mp2mp only.
It is invalid in the service type of p2p.
"
DEFVAL { 1 }
::= { hwMinMSICfgEntry 19 }
hwMinMSIMacLimitAction OBJECT-TYPE
SYNTAX HWProcessBehavior
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates MAC learning restriction of a service instance.
After the number of MAC address entries reaches the limit, the system takes the following actions:
discard: indicates that packets with new MAC address are discarded.
forward: indicates that packets with new MAC address are forwarded, but the address is not added to the MAC address table.
"
::= { hwMinMSICfgEntry 20 }
hwMinMSIMacLimitAlarm OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates MAC learning restriction of a service instance.
Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows:
disable: indicates no alarm is sent.
enable: indicates alarm is sent in syslog.
"
::= { hwMinMSICfgEntry 21 }
hwMinMSIMacLimitMaxinum OBJECT-TYPE
SYNTAX Integer32 (0..131072)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates MAC learning restriction of a service instance.
The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072.
When the number is set to zero, no restriction is imposed on the address learning.
"
::= { hwMinMSICfgEntry 22 }
hwMinMSIL2CtrlProProcess OBJECT-TYPE
SYNTAX BITS {
all(0),
stp(1),
lldp(2),
lacp(3),
dot3ah(4),
dot1ag(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packets are transmitted transparently and all bits are 0; if a bit is 1, it indicates that the packets of this protocol will be discarded.
If bit 0 is 1, it indicates that all layer 2 control packets will be discarded.
If bit 1 is 1, it indicates that the STP packets will be discarded.
If bit 2 is 1, it indicates that the LLAP packets will be discarded.
If bit 3 is 1, it indicates that the LACP packets will be discarded.
If bit 4 is 1, it indicates that the DOT3AH packets will be discarded.
If bit 5 is 1, it indicates that the DOTLAG packets will be discarded.
"
DEFVAL { {all } }
::= { hwMinMSICfgEntry 23}
hwMinMSIUnknownUnicastEnbale OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates how a service instance processes an unknown unicast packet.
By default, the service instance is allowed to broadcast the unknown unicast packet.
This object applies to the mp2mp service instance only.
"
DEFVAL { 1 }
::= { hwMinMSICfgEntry 24 }
hwMinMSIMulticastEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates how a service instance processes an unknown multicast packet.
By default, the service instance is allowed to broadcast the unknown multicast packet.
This object applies to the mp2mp service instance only."
DEFVAL { 1 }
::= { hwMinMSICfgEntry 25 }
hwMinMSIBroadcastEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates how a service instance processes a broadcast packet.
By default, the service instance is allowed to forward the broadcast packet.
This object applies to the mp2mp service instance only.
"
DEFVAL { 1 }
::= { hwMinMSICfgEntry 26 }
hwMinMSIDescription OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates descriptive information of a service instance.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.
"
::= { hwMinMSICfgEntry 27 }
hwMinMSIStatisticsEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that the traffic statistics is enabled on a service instance."
DEFVAL { 2 }
::= { hwMinMSICfgEntry 28 }
hwMinMSIStatisticsReset OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the reset on traffic statistics of a service instance."
::= { hwMinMSICfgEntry 29 }
hwMinMSIFcsTransparentEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark."
DEFVAL { 2 }
::= { hwMinMSICfgEntry 30 }
hwMinMSIIngressPriorityValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the source priority of a service instance.
It is used to set the I-TAG priority field when packets are
encapsulated for transmission on the tunnel.
The source priority has eight levels that range from 0 to 7.
By default, the source priority is copied to the mac-tunnel.
When the source priority is set to 8,
it indicates that the service instance is not configured with a priority,
and the priority does not exist."
::= { hwMinMSICfgEntry 31 }
hwMinMSIEgressPriorityTrustBTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the destination priority of a service
instance is copied from the B-TAG priority.
It is used to set whether the I-TAG priority is copied from the B-TAG
priority when packets reach the end of the tunnel and are decapsulated.
By default, the B-TAG priority is not copied to I-TAG."
DEFVAL { 2 }
::= { hwMinMSICfgEntry 32 }
hwMinMSIIngressDeiValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the source DEI of a service instance.
It is used to set the DEI field when packets are encapsulated for transmission
on the tunnel. When DEI is true, the value is set to 1.
When DEI is false, the value is set to 0. By default,
the S-DEI priority is copied to the mac-tunnel.
When the value of the DEI is set to 2,
it indicates that no DEI is configured on the tunnel."
DEFVAL { 1 }
::= { hwMinMSICfgEntry 33 }
hwMinMSIEgressDeiTrustBDei OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the destination DEI of a service instance
is copied from the B-DEI priority.
It is used to set whether the DEI of I-TAG is coped from B-DEI
when packets reach the end of the tunnel and are decpasulated.
By default, B-DEI is not copied to I-TAG."
DEFVAL { 2 }
::= { hwMinMSICfgEntry 34 }
hwMinMSIIsolateAll OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p."
DEFVAL { 2 }
::= { hwMinMSICfgEntry 35 }
hwMinMSIRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy"
::= { hwMinMSICfgEntry 51 }
hwMinMSIMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMSIMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration table of a service instance user. "
::= { hwMinMSIObjects 3 }
hwMinMSIMappingEntry OBJECT-TYPE
SYNTAX HwMinMSIMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the configuration table entry of a service instance user. "
INDEX { hwMinMSIIndex, hwMinMSIMappingIfIndex,hwMinMSIMappingVlanPriority,hwMinMSIMappingGlobalVlanID}
::= { hwMinMSIMappingTable 1 }
HwMinMSIMappingEntry ::=
SEQUENCE {
hwMinMSIMappingIfIndex
InterfaceIndexOrZero,
hwMinMSIMappingVlanPriority
Integer32,
hwMinMSIMappingGlobalVlanID
VlanIdOrNone,
hwMinMSIMappingVlanListLow
VlanList,
hwMinMSIMappingVlanListHigh
VlanList,
hwMinMSIMappingUserIsolate
EnabledStatus,
hwMinMSIMappingRowStatus
RowStatus
}
hwMinMSIMappingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port that is mapped to the current service instance. If the value is 0, it means that port mapping is not supported."
::= { hwMinMSIMappingEntry 1 }
hwMinMSIMappingVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The priority of a user's packets that are mapped to the current service instance. If the value is 8, it means that the priority mapping is not supported."
::= { hwMinMSIMappingEntry 2}
hwMinMSIMappingGlobalVlanID OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The global VLAN ID that is mapped to the current service instance. If the value is 0, it means that the global VLAN mapping is not supported."
::= { hwMinMSIMappingEntry 3 }
hwMinMSIMappingVlanListLow OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the VLAN ID starting value of a service instance user. "
::= { hwMinMSIMappingEntry 11 }
hwMinMSIMappingVlanListHigh OBJECT-TYPE
SYNTAX VlanList (SIZE(256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the VLAN ID ending value of a service instance user. "
::= { hwMinMSIMappingEntry 12 }
hwMinMSIMappingUserIsolate OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the specified mapping user of a service instance is isolated. By default, the isolation is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p"
DEFVAL { 2 }
::= { hwMinMSIMappingEntry 13 }
hwMinMSIMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy"
::= { hwMinMSIMappingEntry 51 }
hwMinMSIBindMacTnlTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMSIBindMacTnlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the mac-tunnel table bound with a service instance."
::= { hwMinMSIObjects 4 }
hwMinMSIBindMacTnlEntry OBJECT-TYPE
SYNTAX HwMinMSIBindMacTnlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the mac-tunnel table entry bound with a service instance."
INDEX { hwMinMSIIndex,hwMinMSIBindMacTnlIndex }
::= { hwMinMSIBindMacTnlTable 1 }
HwMinMSIBindMacTnlEntry ::=
SEQUENCE {
hwMinMSIBindMacTnlIndex
Unsigned32,
hwMinMSIBindMacTnlRowStatus
RowStatus
}
hwMinMSIBindMacTnlIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the index of Mac Tunnel. It begins with one."
::= { hwMinMSIBindMacTnlEntry 1 }
hwMinMSIBindMacTnlRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy"
::= { hwMinMSIBindMacTnlEntry 51 }
hwMinMSIStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMSIStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the hwMinMSIStatisticsTable of a service instance. "
::= { hwMinMSIObjects 5 }
hwMinMSIStatisticsEntry OBJECT-TYPE
SYNTAX HwMinMSIStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the hwMinMSIStatisticsTable entry of a service instance."
INDEX { hwMinMSIIndex }
::= { hwMinMSIStatisticsTable 1 }
HwMinMSIStatisticsEntry ::=
SEQUENCE {
hwMinMSIInPackets
Counter64,
hwMinMSIInBytes
Counter64,
hwMinMSIOutPackets
Counter64,
hwMinMSIOutBytes
Counter64
}
hwMinMSIInPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of packets received by a user of the current service instance."
::= { hwMinMSIStatisticsEntry 11 }
hwMinMSIInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bytes received by a user of the current service instance."
::= { hwMinMSIStatisticsEntry 12 }
hwMinMSIOutPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of packets sent by a user of the current service instance."
::= { hwMinMSIStatisticsEntry 13 }
hwMinMSIOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of bytes sent by a user of the current service instance."
::= { hwMinMSIStatisticsEntry 14 }
hwMinMSIStaticMacFwdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMinMSIStaticMacFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the static MAC forwarding table of a service instance:"
::= { hwMinMSIObjects 6 }
hwMinMSIStaticMacFwdEntry OBJECT-TYPE
SYNTAX HwMinMSIStaticMacFwdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the static MAC forwarding table entry of a service instance:"
INDEX { hwMinMSIIndex, hwMinMSIStaticMacFwdCDMac }
::= { hwMinMSIStaticMacFwdTable 1 }
HwMinMSIStaticMacFwdEntry ::=
SEQUENCE {
hwMinMSIStaticMacFwdCDMac
MacAddress,
hwMinMSIStaticMacFwdMacTnlName
OCTET STRING,
hwMinMSIStaticMacFwdOutgoingIfIndex
InterfaceIndexOrZero,
hwMinMSIStaticMacFwdVlanID
VlanIdOrNone,
hwMinMSIStaticMacFwdType
HWStaticMacFwdType,
hwMinMSIStaticMacFwdRowStatus
RowStatus
}
hwMinMSIStaticMacFwdCDMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the destination MAC address of a customer."
::= { hwMinMSIStaticMacFwdEntry 1 }
hwMinMSIStaticMacFwdMacTnlName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte. "
::= { hwMinMSIStaticMacFwdEntry 11 }
hwMinMSIStaticMacFwdOutgoingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates a outbound port.
The value zero is used to indicate that interface was unknown or none."
::= { hwMinMSIStaticMacFwdEntry 12 }
hwMinMSIStaticMacFwdVlanID OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the downstream vlanid.
The special value of zero is used to indicate that no VLAN-ID is present or used. "
::= { hwMinMSIStaticMacFwdEntry 13 }
hwMinMSIStaticMacFwdType OBJECT-TYPE
SYNTAX HWStaticMacFwdType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Indicates the type of the static MAC forwarding table of a service instance:
static(1): indicates a static entry.
blackhole(2): indicates a blackhole entry. "
::= { hwMinMSIStaticMacFwdEntry 14 }
hwMinMSIStaticMacFwdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy."
::= { hwMinMSIStaticMacFwdEntry 51 }
hwSINameToIndexMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSINameToIndexMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name and the index mapping table of a service instance."
::= { hwMinMSIObjects 7 }
hwSINameToIndexMappingEntry OBJECT-TYPE
SYNTAX HwSINameToIndexMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name and the index mapping table entry of a service instance."
INDEX { hwSIName }
::= { hwSINameToIndexMappingTable 1 }
HwSINameToIndexMappingEntry ::=
SEQUENCE {
hwSIName
OCTET STRING,
hwSIIndex
Unsigned32
}
hwSIName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
"
::= { hwSINameToIndexMappingEntry 1 }
hwSIIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of a service instance.It begins with one."
::= { hwSINameToIndexMappingEntry 11 }
hwMinMNotifications OBJECT IDENTIFIER ::= { hwMinMMIB 2 }
-- definition of MINM-related trAps
hwMinMMacTnlUp NOTIFICATION-TYPE
OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlAdminStatus, hwMinMMacTnlOperStatus
}
STATUS current
DESCRIPTION
"Indicates the Up alarm of the mac-tunnel.
This object forms a pair with the following hwMinMMacTnlDown.
"
::= { hwMinMNotifications 1 }
hwMinMMacTnlDown NOTIFICATION-TYPE
OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlAdminStatus, hwMinMMacTnlOperStatus
}
STATUS current
DESCRIPTION
"Indicates the Down alarm of the mac-tunnel.
This object forms a pair with the previous hwMinMMacTnlUp.
"
::= { hwMinMNotifications 2 }
hwMinMSIUp NOTIFICATION-TYPE
OBJECTS { hwMinMSIID, hwMinMSIName, hwMinMSIAdminStatus, hwMinMSIOperStatus }
STATUS current
DESCRIPTION
"Indicates the Up alarm of a service instance.
This object forms a pair with the following hwMinMSIDown.
"
::= { hwMinMNotifications 3 }
hwMinMSIDown NOTIFICATION-TYPE
OBJECTS { hwMinMSIID, hwMinMSIName, hwMinMSIAdminStatus, hwMinMSIOperStatus }
STATUS current
DESCRIPTION
"Indicates the Down alarm of a service instance.
This object forms a pair with the previous hwMinMSIUp.
"
::= { hwMinMNotifications 4 }
hwMinMMacTnlCCFaultAlarm NOTIFICATION-TYPE
OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlSomeRMepCcmDefect, hwMinMMacTnlSomeRdiDefect
}
STATUS current
DESCRIPTION
"Indicates an alarm on the connectivity of fault.
"
::= { hwMinMNotifications 5 }
hwMinMMacTnlSwitch NOTIFICATION-TYPE
OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMProtectMacTnlName, hwMinMProtectMacTnlDMac,
hwMinMProtectMacTnlBVlanID, hwMinMProtectSwitchOperation }
STATUS current
DESCRIPTION
"Indicates the Aps protection group switchover alarm of the mac-tunnel.
This object forms a pair with the following hwMinMMacTnlRevertive.
hwMinMMacTnlName: indicates the name of the primary tunnel.
hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel.
hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel.
hwMinMProtectMacTnlName: Indicates the name of the backup tunnel.
hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels.
hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel.
hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel.
"
::= { hwMinMNotifications 6 }
hwMinMMacTnlRevertive NOTIFICATION-TYPE
OBJECTS { hwMinMMacTnlName, hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMProtectMacTnlName, hwMinMProtectMacTnlDMac,
hwMinMProtectMacTnlBVlanID, hwMinMProtectSwitchOperation }
STATUS current
DESCRIPTION
"
Indicates the Aps protection group switchover alarm of the mac-tunnel.
This object forms a pair with the previous hwMinMMacTnlSwitch.
hwMinMMacTnlName: indicates the name of the primary tunnel.
hwMinMMacTnlDMac: indicates the destination MAC address of the primary tunnel.
hwMinMMacTnlBVlanID: indicates the BVLANID of the primary tunnel.
hwMinMProtectMacTnlName: Indicates the name of the backup tunnel.
hwMinMProtectSwitchOperation: Indicates the switchover commands for the Aps protection group of mac-tunnels.
hwMinMProtectMacTnlBVlanID: indicates the BVLANID of the backup tunnel.
hwMinMProtectMacTnlDMac:indicates the destination MAC address of the backup tunnel."
::= { hwMinMNotifications 7 }
hwMinMSIMacLimitNumRaisingThreshold NOTIFICATION-TYPE
OBJECTS { hwMinMSIName, hwMinMSIID, hwMinMSIMacLimitMaxinum }
STATUS current
DESCRIPTION
"Indicates the alarm of the mac limiting number beyond the Threshold."
::= { hwMinMNotifications 8 }
-- -------------------------------------------------------------
-- HUAWEI-MINM-MIB - Conformance Information
-- -------------------------------------------------------------
hwMinMConformance OBJECT IDENTIFIER ::= { hwMinMMIB 3 }
hwMinMGroups OBJECT IDENTIFIER ::= { hwMinMConformance 1 }
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
hwMinMSystemGroup OBJECT-GROUP
OBJECTS { hwMinMVirtualMac, hwMinMMacTnlBVlanListLow, hwMinMMacTnlBVlanListHigh,hwMinMTrapEnable }
STATUS current
DESCRIPTION
"A collection of objects providing the System configuration of the MAC-in-MAC
capability."
::= { hwMinMGroups 1 }
hwMinMMacTnlCfgGroup OBJECT-GROUP
OBJECTS { hwMinMVirtualMac, hwMinMMacTnlBVlanListLow, hwMinMMacTnlBVlanListHigh, hwMinMMacTnlIndexNext, hwMinMMacTnlName,
hwMinMMacTnlDMac, hwMinMMacTnlBVlanID, hwMinMMacTnlBVlanType, hwMinMMacTnlPriorityValue, hwMinMMacTnlOutgoingIfIndex,
hwMinMMacTnlSplitHorizonEnable, hwMinMMacTnlAdminStatus, hwMinMMacTnlOperStatus, hwMinMMacTnlDescription, hwMinMMacTnlRowStatus,
hwMacTnlIndex,hwMinMMacTnlStatisticsReset,hwMinMMacTnlPriorityTrustITag,hwMinMMacTnlDeiTrustIDei,hwMinMMacTnlDeiValue }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration of the MAC TUNNEL
capability."
::= { hwMinMGroups 2 }
hwMinMMacTnlStatisticsGroup OBJECT-GROUP
OBJECTS { hwMinMMacTnlInPackets, hwMinMMacTnlInBytes, hwMinMMacTnlOutPackets, hwMinMMacTnlOutBytes
}
STATUS current
DESCRIPTION
"A collection of objects providing the Statistics of the Service Instance
capability."
::= { hwMinMGroups 3 }
hwMinMMacTnlOAMGroup OBJECT-GROUP
OBJECTS { hwMinMMacTnlCfmEnable, hwMinMMacTnlCCInterval, hwMinMMacTnlSomeRMepCcmDefect, hwMinMMacTnlSomeRdiDefect, hwMinMMacTnlCcReceiveEnabled,hwMinMMacTnlCCRowStatus,
hwMinMMacTnlLbmEnable, hwMinMMacTnlLbmTimeStamp, hwMinMMacTnlLbmTimeOut, hwMinMMacTnlLbmTimes,
hwMinMMacTnlLbmSize, hwMinMMacTnlLbrIn, hwMinMMacTnlMacPingRTTMin,hwMinMMacTnlMacPingRTTMax,hwMinMMacTnlMacPingRTTAvg,
hwMinMMacTnlMacPingPacketLossRatio, hwMinMMacTnlLbmResult,hwMinMMacTnlLbRowStatus, hwMinMMacTnlLtmEnable, hwMinMMacTnlLtmTimeStamp,
hwMinMMacTnlLtmTimeOut, hwMinMMacTnlLtmTtl, hwMinMMacTnlLtmFlags,hwMinMMacTnlLtmSeqNumber,hwMinMMacTnlLtmEgressIdentifier,hwMinMMacTnlLtmResult, hwMinMMacTnlLtmRowStatus,
hwMinMMacTnlLtrTtl,hwMinMMacTnlLtrForwarded,hwMinMMacTnlLtrLastEgressIdentifier,
hwMinMMacTnlLtrNextEgressIdentifier,hwMinMMacTnlLtrRelay,hwMinMMacTnlLtrIngress,hwMinMMacTnlLtrIngressMac,
hwMinMMacTnlLtrIngressPortIdSubtype,hwMinMMacTnlLtrIngressPortId,hwMinMMacTnlLtrEgress,hwMinMMacTnlLtrEgressMac,hwMinMMacTnlLtrEgressPortIdSubtype,
hwMinMMacTnlLtrEgressPortId
}
STATUS current
DESCRIPTION
"A collection of objects providing the OAM of the MAC TUNNEL
capability."
::= { hwMinMGroups 4 }
hwMinMMacTnlApsGroup OBJECT-GROUP
OBJECTS { hwMinMProtectMacTnlName, hwMinMProtectApsSwitchMode, hwMinMProtectProtocolApsEnable,
hwMinMProtectApsFastInterval, hwMinMProtectHoldoffTime, hwMinMProtectRevMode, hwMinMProtectRevWtrTime, hwMinMProtectSwitchOperation,
hwMinMProtectProtocol,hwMinMProtectMacTnlDMac, hwMinMProtectMacTnlBVlanID, hwMinMProtectRowStatus,hwMinMProtectMacTnlIndex }
STATUS current
DESCRIPTION
"A collection of objects providing the Aps of the MAC TUNNEL
capability."
::= { hwMinMGroups 5 }
hwMinMSICfgGroup OBJECT-GROUP
OBJECTS { hwMinMSIIndexNext, hwMinMSIID, hwMinMSIName, hwMinMSIServiceType, hwMinMSIPriorityTrust8021p,
hwMinMSIPriorityValue, hwMinMSIInterfaceType, hwMinMSIAdminStatus, hwMinMSIOperStatus, hwMinMSIMacLearningEnable,
hwMinMSIMacLimitAction, hwMinMSIMacLimitAlarm, hwMinMSIMacLimitMaxinum, hwMinMSIL2CtrlProProcess,
hwMinMSIUnknownUnicastEnbale, hwMinMSIMulticastEnable, hwMinMSIBroadcastEnable, hwMinMSIDescription, hwMinMSIRowStatus,
hwMinMSIStaticMacFwdOutgoingIfIndex, hwMinMSIStaticMacFwdVlanID, hwMinMSIStaticMacFwdType,hwMinMSIFcsTransparentEnable,
hwMinMSIStaticMacFwdRowStatus, hwSIIndex, hwMinMSIBindMacTnlRowStatus, hwMinMSIStaticMacFwdMacTnlName,hwMinMSIMappingVlanListLow,hwMinMSIMappingVlanListHigh,
hwMinMSIMappingUserIsolate, hwMinMSIIngressPriorityValue,hwMinMSIEgressPriorityTrustBTag,hwMinMSIIngressDeiValue,hwMinMSIEgressDeiTrustBDei,hwMinMSIIsolateAll,hwMinMSIMappingRowStatus }
STATUS current
DESCRIPTION
"A collection of objects providing the configuration of Service Instance
capability."
::= { hwMinMGroups 6 }
hwMinMSIStatisticsGroup OBJECT-GROUP
OBJECTS { hwMinMSIInPackets, hwMinMSIInBytes, hwMinMSIOutPackets, hwMinMSIOutBytes, hwMinMSIStatisticsReset,
hwMinMSIStatisticsEnable }
STATUS current
DESCRIPTION
"A collection of objects providing the Statistics of the Service Instance
capability."
::= { hwMinMGroups 7 }
hwMinMNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwMinMMacTnlUp, hwMinMMacTnlDown, hwMinMSIUp, hwMinMSIDown, hwMinMMacTnlCCFaultAlarm,
hwMinMMacTnlSwitch, hwMinMMacTnlRevertive, hwMinMSIMacLimitNumRaisingThreshold }
STATUS current
DESCRIPTION
"Collection of notification objects."
::= { hwMinMGroups 8 }
hwMinMCompliances MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities implementing
the Huawei MINM MIB"
MODULE -- this module
MANDATORY-GROUPS { hwMinMSystemGroup, hwMinMMacTnlCfgGroup, hwMinMMacTnlOAMGroup, hwMinMMacTnlApsGroup, hwMinMSICfgGroup,
hwMinMMacTnlStatisticsGroup, hwMinMSIStatisticsGroup, hwMinMNotificationGroup }
::= { hwMinMConformance 2 }
END
--
-- HUAWEI-MINM-MIB.mib
--