mibs/huawei/HUAWEI-MPLSOAM-MIB
-- ==================================================================
-- Copyright (C) 2005 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI Layer Two MAC management MIB
-- Reference:
-- Version: V1.0
-- History:
-- ==================================================================
-- HUAWEI-MPLSOAM-MIB.mib
-- ==================================================================
--
-- Variables and types to be imported
--
-- ==================================================================
HUAWEI-MPLSOAM-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwMpls
FROM HUAWEI-MIB
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, TruthValue, TimeStamp, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.2011.5.12.7
-- April 27, 2005 at 17:24 GMT
-- 1.3.6.1.4.1.2011.5.12.7
hwMplsOam MODULE-IDENTITY
LAST-UPDATED "200504271724Z" -- April 27, 2005 at 17:24 GMT
ORGANIZATION
"Huawei Technologies Co., Ltd."
CONTACT-INFO
"R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com"
DESCRIPTION
"The HUAWEI-MPLSOAM-MIB contains objects to configure OAM module.
The Operation, Administration and Maintenance (OAM)
is an effective means for decreasing the cost of network maintenance.
The MPLS OAM is used to administrate and maintain MPLS. "
::= { hwMpls 7 }
--
-- Node definitions
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.5.12.7.1
-- 1.3.6.1.4.1.2011.5.12.7.1
hwMplsOamPs OBJECT IDENTIFIER ::= { hwMplsOam 1 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1
-- 1.3.6.1.4.1.2011.5.12.7.1.1
hwMplsOamObjects OBJECT IDENTIFIER ::= { hwMplsOamPs 1 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.1
-- 1.3.6.1.4.1.2011.5.12.7.1.1.1
hwMplsOamCapability OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether OAM is globally capable.
1: capable;
0: incapable;
The default value is incapable."
::= { hwMplsOamObjects 1 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3
-- 1.3.6.1.4.1.2011.5.12.7.1.1.2
hwMplsOamIgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMplsOamIgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-LSP MPLS OAM capability and
associated information, such as IgrTunnName and IgrDetType."
::= { hwMplsOamObjects 2 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1
hwMplsOamIgrEntry OBJECT-TYPE
SYNTAX HwMplsOamIgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at ingress."
INDEX { hwMplsOamIgrIndex }
::= { hwMplsOamIgrTable 1 }
HwMplsOamIgrEntry ::=
SEQUENCE {
hwMplsOamIgrIndex
Unsigned32,
hwMplsOamIgrTunnName
OCTET STRING,
hwMplsOamIgrDetType
INTEGER,
hwMplsOamIgrDetFreq
INTEGER,
hwMplsOamIgrRevType
INTEGER,
hwMplsOamIgrRevLspName
OCTET STRING,
hwMplsOamIgrRevLsrId
IpAddress,
hwMplsOamIgrRevSessTunnId
Integer32,
hwMplsOamIgrEnable
INTEGER,
hwMplsOamIgrValid
Integer32,
hwMplsOamIgrAvaState
Integer32,
hwMplsOamIgrDefectType
Integer32,
hwMplsOamIgrRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1
hwMplsOamIgrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a unique index for an OAM ingress entry in the OAM table."
::= { hwMplsOamIgrEntry 1 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2
hwMplsOamIgrTunnName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of a tunnel.
For ingress, it means the tunnel name of the detected LSP.
For egress, it means the tunnel name of the reverse LSP."
::= { hwMplsOamIgrEntry 2 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3
hwMplsOamIgrDetType OBJECT-TYPE
SYNTAX INTEGER {
cv(1),
ffd(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"There are two types of OAM packets, CV and FFD.
The CV flow is generated at the source LSR of the LSP with
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
FFD provides failure detection option for an LSP independent
of the CV based availability model and is not tied to the
CV insertion rate. Insertion rates at 1/s or faster may
also be used.
The CV/FFD packet contains a network-unique identifier (TTSI)
so that all types of defects can be detected.
1: CV;
2: FFD."
::= { hwMplsOamIgrEntry 3 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4
hwMplsOamIgrDetFreq OBJECT-TYPE
SYNTAX INTEGER {
cv1000ms(0),
ffd10ms2(1),
ffd20ms3(2),
ffd50ms4(3),
ffd100ms5(4),
ffd200ms6(5),
ffd500ms7(6),
ffd3ms8(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50ms;
4: 100ms;
5: 200ms;
6: 500ms;
7: 3ms."
::= { hwMplsOamIgrEntry 4 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5
hwMplsOamIgrRevType OBJECT-TYPE
SYNTAX INTEGER {
private(1),
share(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When an LSP is found to be in defect, the sink LSR if the LSP
should send BDI to inform the source LSR of the LSP, the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If private, then the reverse LSP can be used only when the only
LSP is in defect;
If shared, the reverse LSP which is shared between many forward
LSPs, whose source LSRs are the same and sink LSRs are the same.
1: private;
2: share."
::= { hwMplsOamIgrEntry 5 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6
hwMplsOamIgrRevLspName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates name of the reverse LSP."
::= { hwMplsOamIgrEntry 6 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7
hwMplsOamIgrRevLsrId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Only for ingress, the object indicates the ingress LSR ID of the
reverse LSP,, expressed in IP address."
::= { hwMplsOamIgrEntry 7 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8
hwMplsOamIgrRevSessTunnId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Only for ingress, the object indicates the session tunnel ID of
the reverse LSP."
::= { hwMplsOamIgrEntry 8 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9
hwMplsOamIgrEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether one LSP is OAM enable.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP,and user can set
other configuration.
0: The OAM function is disabled on the ingress;
1: The OAM function is enabled on the ingress."
::= { hwMplsOamIgrEntry 9 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10
hwMplsOamIgrValid OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: stop detect;
1: start detect."
::= { hwMplsOamIgrEntry 10 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.16
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11
hwMplsOamIgrAvaState OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP re-enters the Available state after the LSP Defect state
exists first.
T1 defines the length of time the LSP is in the Defect state
before declaring an LSP Unavailable or returning to defect
free state.
0: available state;
1: unavailable state."
::= { hwMplsOamIgrEntry 11 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.17
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12
hwMplsOamIgrDefectType OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defect is defined as interruption of the capability of a
transport entity (e.g., network connection) to transfer user
or OAM information. There are six types of defect:
0: no defect;
1: dServer;
2: dPeerMe;
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect;
6: dExcess, Receiving excess rate of CV/FFD;
7: dUnknown, Unknown defect in the MPLS network..
8: rlsn down;
9: dIngressDown."
::= { hwMplsOamIgrEntry 12 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.18
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13
hwMplsOamIgrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and
delete a row in this table."
::= { hwMplsOamIgrEntry 13 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.3
hwMplsOamEgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMplsOamEgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-LSP MPLS OAM capability and
associated information, such as DetectType, DetectFrequency."
::= { hwMplsOamObjects 3 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1
hwMplsOamEgrEntry OBJECT-TYPE
SYNTAX HwMplsOamEgrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at egress."
INDEX { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId }
::= { hwMplsOamEgrTable 1 }
HwMplsOamEgrEntry ::=
SEQUENCE {
hwMplsOamEgrLspName
OCTET STRING,
hwMplsOamEgrLsrId
IpAddress,
hwMplsOamEgrSessTunnId
Integer32,
hwMplsOamEgrDetType
INTEGER,
hwMplsOamEgrDetFreq
INTEGER,
hwMplsOamEgrRevType
INTEGER,
hwMplsOamEgrRevTunnName
OCTET STRING,
hwMplsOamEgrAutoEn
INTEGER,
hwMplsOamEgrAutoOvertime
Integer32,
hwMplsOamEgrBDIFreq
INTEGER,
hwMplsOamEgrEnable
INTEGER,
hwMplsOamEgrValid
INTEGER,
hwMplsOamEgrAvaState
Integer32,
hwMplsOamEgrDefectType
Integer32,
hwMplsOamEgrRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.1
hwMplsOamEgrLspName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the name of static LSP at egress."
::= { hwMplsOamEgrEntry 1 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.2
hwMplsOamEgrLsrId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the Ingress LSR ID of the LSP."
::= { hwMplsOamEgrEntry 2 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.3
hwMplsOamEgrSessTunnId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the the Ingress session tunnel ID of the LSP.."
::= { hwMplsOamEgrEntry 3 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.4
hwMplsOamEgrDetType OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
cv(1),
ffd(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"0: invalid, if auto-protocol, this detect type is invalid;
1: CV;
2: FFD."
::= { hwMplsOamEgrEntry 4 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.5
hwMplsOamEgrDetFreq OBJECT-TYPE
SYNTAX INTEGER{
cv1000ms(0),
ffd10ms2(1),
ffd20ms3(2),
ffd50ms4(3),
ffd100ms5(4),
ffd200ms6(5),
ffd500ms7(6),
invalid8(7),
ffd3ms9(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50ms;
4: 100ms;
5: 200ms;
6: 500ms;
7: invalid;
8: 3ms."
::= { hwMplsOamEgrEntry 5 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.6
hwMplsOamEgrRevType OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
private(1),
share(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When an LSP is found to be in defect, the sink LSR of the LSP
should send BDI to inform the source LSR of the LSP,the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If private, then the reverse LSP can be used only when the only
LSP in defect;
If shared, the reverse LSP, which is shared between many forward
LSPs that have the same source LSRs and sink LSRs.
0: invalid, when the reverse LSR does not exist;
1: private;
2: share."
::= { hwMplsOamEgrEntry 6 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.7
hwMplsOamEgrRevTunnName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the name of a reverse tunnel."
::= { hwMplsOamEgrEntry 7 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.8
hwMplsOamEgrAutoEn OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If autoprotocol, then the egress can process extended FDI sent
by ingress.
0: disable;
1: enable;
Valid only for the egress configuration."
::= { hwMplsOamEgrEntry 8 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.9
hwMplsOamEgrAutoOvertime OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This time is set at the egress.
If the egress receives CV/FFD, it records the parameters
included in the packet, such as OAM type and frequency.
If the egress does not receive any OAM packet before the timer
expires, the sink LSR will send BDI with dLOCV defect.
Valid only for the egress configuration."
::= { hwMplsOamEgrEntry 9 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.10
hwMplsOamEgrBDIFreq OBJECT-TYPE
SYNTAX INTEGER {
perSecond(0),
detectFrequency(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding direction.
The frequency of BDI can be set by user.
Only valid for egress configuration.
The default value is detect frequency and it is valid only when a
backward-LSP exists.
0: per-second;
1: same as detect frequency."
::= { hwMplsOamEgrEntry 10 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.11
hwMplsOamEgrEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether one LSP is enabled with OAM.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and user can set
other configuration.
0: The OAM function is disabled on the egress;
1: The OAM function is enabled on the egress."
::= { hwMplsOamEgrEntry 11 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.12
hwMplsOamEgrValid OBJECT-TYPE
SYNTAX INTEGER {
stop(1),
start(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1: stop detect;
2: start detect."
::= { hwMplsOamEgrEntry 12 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.13
hwMplsOamEgrAvaState OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP re-enters the Available state after the LSP Defect State.
first exists.
T1 defines the length of time the LSP is in the Defect state
before declaring an LSP Unavailable or returning to defect
free state
0: available state;
1: unavailable state."
::= { hwMplsOamEgrEntry 13 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.14
hwMplsOamEgrDefectType OBJECT-TYPE
SYNTAX Integer32 (0..9)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect.;
6: dExcess, Receiving excess rate of CV/FFD;
7: dUnknown, Unknown defect in the MPLS network.
8: rlsn down;
9: dEgressDown."
::= { hwMplsOamEgrEntry 14 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.15
hwMplsOamEgrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and
delete a row in this table."
::= { hwMplsOamEgrEntry 15 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4
hwMplsOamRlsnTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMplsOamRlsnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies RLSN capability and
associated information, such as RlsnLsrId and RlsnLsrId."
::= { hwMplsOamObjects 4 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1
hwMplsOamRlsnEntry OBJECT-TYPE
SYNTAX HwMplsOamRlsnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR to binding the name, lsr-id and tunnel-id of the LSP at egress."
INDEX { hwMplsOamRlsnLspName, hwMplsOamRlsnLsrId, hwMplsOamRlsnSessTunnId, hwMplsOamRlsnIfIndex }
::= { hwMplsOamRlsnTable 1 }
HwMplsOamRlsnEntry ::=
SEQUENCE {
hwMplsOamRlsnLspName
OCTET STRING,
hwMplsOamRlsnLsrId
IpAddress,
hwMplsOamRlsnSessTunnId
Integer32,
hwMplsOamRlsnIfIndex
Integer32,
hwMplsOamRlsnIfName
OCTET STRING,
hwMplsOamRlsnIsDown
INTEGER,
hwMplsOamRlsnRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.2
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1.1
hwMplsOamRlsnLspName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For egress, the object indicates name of the LSP."
::= { hwMplsOamRlsnEntry 1 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.3
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1.2
hwMplsOamRlsnLsrId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For egress, the object indicates the Ingress LSR ID of the LSP"
::= { hwMplsOamRlsnEntry 2 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.4.1.4
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1.3
hwMplsOamRlsnSessTunnId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For egress, the object indicates the Ingress session tunnel ID
of the LSP"
::= { hwMplsOamRlsnEntry 3 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1.4
hwMplsOamRlsnIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the index of outbound interface."
::= { hwMplsOamRlsnEntry 4 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1.5
hwMplsOamRlsnIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object indicates the name of outbound interface."
::= { hwMplsOamRlsnEntry 5 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1.6
hwMplsOamRlsnIsDown OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1: up
2: down"
::= { hwMplsOamRlsnEntry 6 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5.1.7
hwMplsOamRlsnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and
delete a row in this table. "
::= { hwMplsOamRlsnEntry 7 }
-- 1.3.6.1.4.1.2011.5.12.7.1.1.5
hwMplsOamTrapOpen OBJECT-TYPE
SYNTAX Unsigned32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0: disable
1: enable"
::= { hwMplsOamObjects 5 }
-- 1.3.6.1.4.1.2011.5.12.7.1.3
-- 1.3.6.1.4.1.2011.5.12.7.1.2
hwMplsOamNotifications OBJECT IDENTIFIER ::= { hwMplsOamPs 2 }
-- 1.3.6.1.4.1.2011.5.12.7.1.3.1
-- 1.3.6.1.4.1.2011.5.12.7.1.2.1
hwMplsOamIgrLSPOutDefect NOTIFICATION-TYPE
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
not in the defect state at the LSP ingress."
::= { hwMplsOamNotifications 1 }
-- 1.3.6.1.4.1.2011.5.12.7.1.3.2
-- 1.3.6.1.4.1.2011.5.12.7.1.2.2
hwMplsOamIgrLSPInDefect NOTIFICATION-TYPE
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
in the defect state at the LSP ingress."
::= { hwMplsOamNotifications 2 }
-- 1.3.6.1.4.1.2011.5.12.7.1.3.3
-- 1.3.6.1.4.1.2011.5.12.7.1.2.3
hwMplsOamIgrLSPAva NOTIFICATION-TYPE
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
in the available state at the LSP ingress."
::= { hwMplsOamNotifications 3 }
-- 1.3.6.1.4.1.2011.5.12.7.1.3.4
-- 1.3.6.1.4.1.2011.5.12.7.1.2.4
hwMplsOamIgrLSPUnAva NOTIFICATION-TYPE
OBJECTS { hwMplsOamIgrIndex, hwMplsOamIgrTunnName, hwMplsOamIgrAvaState, hwMplsOamIgrDefectType }
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
in the unavailable state at the LSP ingress."
::= { hwMplsOamNotifications 4 }
-- 1.3.6.1.4.1.2011.5.12.7.1.2.5
hwMplsOamEgrLSPOutDefect NOTIFICATION-TYPE
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
}
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
not in the defect state at the LSP egress."
::= { hwMplsOamNotifications 5 }
-- 1.3.6.1.4.1.2011.5.12.7.1.2.6
hwMplsOamEgrLSPInDefect NOTIFICATION-TYPE
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
}
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
in the defect state at the LSP egress."
::= { hwMplsOamNotifications 6 }
-- 1.3.6.1.4.1.2011.5.12.7.1.2.7
hwMplsOamEgrLSPAva NOTIFICATION-TYPE
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
}
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
in the available state at the LSP egress."
::= { hwMplsOamNotifications 7 }
-- 1.3.6.1.4.1.2011.5.12.7.1.2.8
hwMplsOamEgrLSPUnAva NOTIFICATION-TYPE
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrAvaState, hwMplsOamEgrDefectType
}
STATUS current
DESCRIPTION
"This notification is generated when the LSP is found
in the unavailable state at the LSP egress."
::= { hwMplsOamNotifications 8 }
-- 1.3.6.1.4.1.2011.5.12.7.1.2.9
hwMplsOamEgrFirstPkt NOTIFICATION-TYPE
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrDetType, hwMplsOamEgrDetFreq
}
STATUS current
DESCRIPTION
"If autoprotocol is enabled, this notification is generated when
egress receives the first CV/FFD packet."
::= { hwMplsOamNotifications 9 }
-- 1.3.6.1.4.1.2011.5.12.7.1.2.10
hwMplsOamEgrAutoProFDI NOTIFICATION-TYPE
OBJECTS { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId, hwMplsOamEgrEnable }
STATUS current
DESCRIPTION
"The FDI packet is used by the upstream node in an LSP
to inform the egress of the defect information.
It is also generated when the auto protocol is enabled,
with which the LSP ingress notifies the egress to stop
the OAM detection."
::= { hwMplsOamNotifications 10 }
-- 1.3.6.1.4.1.2011.5.12.7.1.2.11
hwMplsOamEgrRlsnDown NOTIFICATION-TYPE
OBJECTS { hwMplsOamRlsnLspName, hwMplsOamRlsnLsrId, hwMplsOamRlsnIsDown, hwMplsOamRlsnIfName, hwMplsOamRlsnSessTunnId
}
STATUS current
DESCRIPTION
"This notification is generated when the Rlsn is down."
::= { hwMplsOamNotifications 11 }
END
--
-- HUAWEI-MPLSOAM-MIB.mib
--