mibs/huawei/HUAWEI-NTP-TRAP-MIB
-- ===================================================================
-- Copyright (C) 2020 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description:
-- Reference:
-- Version: V1.07
-- ===================================================================
HUAWEI-NTP-TRAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY,NOTIFICATION-TYPE,
IpAddress, Unsigned32, Integer32, Counter64 FROM SNMPv2-SMI
RowStatus, TruthValue, DateAndTime,
DisplayString FROM SNMPv2-TC
huaweiUtility FROM HUAWEI-MIB
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
InterfaceIndex FROM IF-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF;
hwNtpTrapMib MODULE-IDENTITY
LAST-UPDATED "202007071600Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"This MIB is to provide TRAP support for NTP.
hwNtpStateChangeTrap & hwNtpSysPeerChangeTrap are added to notify the
NTP state change & system peer change information"
REVISION "202007071600Z"
DESCRIPTION "V1.07, adding hwNtpSynchronizationFailure hwNtpSynchronizationFailureResume"
REVISION "202003121600Z"
DESCRIPTION "V1.06, adding hwNtpMaxPacketRecvPerSecReach, hwNtpMaxPacketRecvPerSecResume, hwNtpMaxPacketRecvPerSecr"
REVISION "202003101600Z"
DESCRIPTION "V1.05, modify hwNtpMaxDynamicSessionsrange 0..100"
REVISION "202003031600Z"
DESCRIPTION "V1.04, adding hwNtpDynamicSessionLimitReach, hwNtpDynamicSessionLimitReachResume, hwNtpMaxDynamicSessions"
REVISION "201909181600Z"
DESCRIPTION "V1.03, fixing the description of hwNtpCurrentClientNum"
REVISION "201906182200Z"
DESCRIPTION "V1.02, adding hwNtpClientLimitExceed, hwNtpClientLimitExceedResume, hwNtpCurrentClientNum"
REVISION "201610181600Z"
DESCRIPTION "V1.01, adding hwNtpSourceVpnName, hwNtpOldSourceVpnName"
REVISION "201508111600Z"
DESCRIPTION "V1.00, initial version."
::= { huaweiUtility 80 }
hwNtpTrapObjects OBJECT IDENTIFIER ::= { hwNtpTrapMib 1 }
hwNtpState OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the NTP local clock state"
::= { hwNtpTrapObjects 1 }
hwNtpSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Specifies server IP address to which local NTP clock is synchronized"
::= { hwNtpTrapObjects 2 }
hwNtpSourceVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates Vpn instance associated with the peer to which the local NTP clock is synchronized"
::= { hwNtpTrapObjects 3 }
hwNtpOldSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Specifies server IP address to which local NTP clock was synchronized last time"
::= { hwNtpTrapObjects 4 }
hwNtpOldSourceVpnName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates Vpn instance associated with the peer to which the local NTP clock is synchronized last time"
::= { hwNtpTrapObjects 5 }
hwNtpCurrentClientNum OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object identifies the current ntp client number."
::= { hwNtpTrapObjects 6 }
hwNtpMaxDynamicSessions OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object identifies the maximum dynamic session number."
::= { hwNtpTrapObjects 7 }
hwNtpMaxPacketRecvPerSecr OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object identifies the current packet numbers which ntp received."
::= { hwNtpTrapObjects 8 }
hwNtpTraps OBJECT IDENTIFIER ::= { hwNtpTrapMib 2 }
hwNtpStateChangeTrap NOTIFICATION-TYPE
OBJECTS { hwNtpState, hwNtpSource, hwNtpSourceVpnName }
STATUS current
DESCRIPTION
"This TRAP is used to notify when the NTP state changes from synchronized to unsynchronized & vice-versa.
NTP state changes occur due to reasons listed below
1) System clock is reset by configuration.
2) Selected peer is deleted by configuration.
3) Selected peer is unreachable.
4) Authentication failed for selected peer.
5) Selected peer clock is not synchronized.
6) Time elapsed since peer clock's last update is not within permissible limit.
7) Source stratum is greater than the local stratum.
8) System synchronization source lost.
9) NTP mode mismatch for selected peer."
::= { hwNtpTraps 1 }
hwNtpSysPeerChangeTrap NOTIFICATION-TYPE
OBJECTS { hwNtpOldSource, hwNtpOldSourceVpnName, hwNtpSource, hwNtpSourceVpnName }
STATUS current
DESCRIPTION
"This TRAP is used to notify the NTP system peer change from one source IP to other source IP without state change.
This trap is generated when the selected NTP peer is changed"
::= { hwNtpTraps 2 }
hwNtpClientLimitExceed NOTIFICATION-TYPE
OBJECTS { hwNtpCurrentClientNum }
STATUS current
DESCRIPTION
"This TRAP is used to notify the NTP client path limit exceed."
::= { hwNtpTraps 3 }
hwNtpClientLimitExceedResume NOTIFICATION-TYPE
OBJECTS { hwNtpCurrentClientNum }
STATUS current
DESCRIPTION
"This NTP client path limit exceed alarm was repaired."
::= { hwNtpTraps 4 }
hwNtpDynamicSessionLimitReach NOTIFICATION-TYPE
OBJECTS { hwNtpMaxDynamicSessions }
STATUS current
DESCRIPTION
"This TRAP is used to notify the NTP dynamic session limit reach."
::= { hwNtpTraps 5 }
hwNtpDynamicSessionLimitReachResume NOTIFICATION-TYPE
OBJECTS { hwNtpMaxDynamicSessions }
STATUS current
DESCRIPTION
"This NTP dynamic session limit reach alarm was repaired."
::= { hwNtpTraps 6 }
hwNtpMaxPacketRecvPerSecReach NOTIFICATION-TYPE
OBJECTS { hwNtpMaxPacketRecvPerSecr }
STATUS current
DESCRIPTION
"This TRAP is used to notify the NTP packet processing rate reaches the upper threshold."
::= { hwNtpTraps 7 }
hwNtpMaxPacketRecvPerSecResume NOTIFICATION-TYPE
OBJECTS { hwNtpMaxPacketRecvPerSecr }
STATUS current
DESCRIPTION
"This NTP packet processing rate reaches the upper threshold alarm was repaired."
::= { hwNtpTraps 8 }
hwNtpSynchronizationFailure NOTIFICATION-TYPE
OBJECTS { hwNtpState, hwNtpSource }
STATUS current
DESCRIPTION
"This TRAP is used to notify when the NTP state changes from synchronized to unsynchronized."
::= { hwNtpTraps 9 }
hwNtpSynchronizationFailureResume NOTIFICATION-TYPE
OBJECTS { hwNtpState, hwNtpSource }
STATUS current
DESCRIPTION
"This NTP state unsynchronized alarm was repaired."
::= { hwNtpTraps 10 }
hwNtpTrapMibConformance OBJECT IDENTIFIER ::= { hwNtpTrapMib 3 }
hwNtpTrapMibCompliances OBJECT IDENTIFIER ::= { hwNtpTrapMibConformance 1 }
hwNtpTrapMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"NTP trap MIB compliance."
MODULE
MANDATORY-GROUPS { hwNtpTrapObjectsGroup }
::= { hwNtpTrapMibCompliances 1 }
hwNtpTrapObjectsGroup OBJECT-GROUP
OBJECTS { hwNtpState, hwNtpSource, hwNtpSourceVpnName, hwNtpOldSource, hwNtpOldSourceVpnName, hwNtpCurrentClientNum, hwNtpMaxDynamicSessions, hwNtpMaxPacketRecvPerSecr }
STATUS current
DESCRIPTION
"These objects are used to manage NTP trap parameters"
::= { hwNtpTrapMibCompliances 2 }
hwNtpTrapEventGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwNtpStateChangeTrap, hwNtpSysPeerChangeTrap, hwNtpClientLimitExceed, hwNtpClientLimitExceedResume, hwNtpDynamicSessionLimitReach, hwNtpDynamicSessionLimitReachResume, hwNtpMaxPacketRecvPerSecReach, hwNtpMaxPacketRecvPerSecResume, hwNtpSynchronizationFailure, hwNtpSynchronizationFailureResume }
STATUS current
DESCRIPTION
"These objects are used to manage NTP trap parameters."
::= { hwNtpTrapMibCompliances 3 }
END
--
-- HUAWEI-NTP-TRAP-MIB.mib
--