mibs/huawei/HUAWEI-POE-MIB
-- ===========================================================
-- Copyright (C) 2021 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI POE MIB Definition
-- Reference: This mib was extracted from IEEE 802.3af
-- Version: V1.17
-- History: Liuhui ,2009-08-24, Create
-- ===========================================================
HUAWEI-POE-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
InterfaceIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE,NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI;
hwPoeMIB MODULE-IDENTITY
LAST-UPDATED "202108120000Z" -- Aug 12, 2021 at 00:00 GMT
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
" DESCRIPTION
"The HUAWEI-POE-MIB contains objects to manage POE."
REVISION "202108120000Z"
DESCRIPTION "V1.17, Add hwPoeCommunicateFail and hwPoeCardAbsent "
REVISION "202105080000Z"
DESCRIPTION "V1.16, Modity hwPoePowerOff "
REVISION "201901030000Z"
DESCRIPTION "V1.15, Add hwPoePdOvercurrentPoweroff and hwPoePdOverloadPoweroff "
REVISION "201810180000Z"
DESCRIPTION "V1.134 Modify the range of hwPoeSlotMaximumPower"
REVISION "201805160000Z"
DESCRIPTION "V1.13, Add hwPoeMultiMcuTable and hwPoeSlotMcuSupport"
REVISION "201803080000Z"
DESCRIPTION "V1.12, Add NOTIFICATION-TYPE"
REVISION "201612020000Z"
DESCRIPTION "V1.11, Add hwPoePortFail and hwPoePortFailResume"
REVISION "201609190000Z"
DESCRIPTION "V1.10, Change hwPoePortPdClass properties"
REVISION "201509280000Z"
DESCRIPTION "V1.09, Add hwPoePortLegacyDetect "
REVISION "201508100000Z"
DESCRIPTION "V1.03, Add hwPoeCardAbsent "
REVISION "201504020000Z"
DESCRIPTION "V1.02, Add hwPoeNotAvailable and hwPoeNotAvailableResume "
REVISION "201502250000Z"
DESCRIPTION "V1.06, Add hwPoePortMaxPowerThreshold,hwPoePortMinPowerThreshold "
REVISION "201311120000Z"
DESCRIPTION "V1.05, Add hwPoePowerInfoTable "
REVISION "201310220000Z"
DESCRIPTION "V1.04, Change the maximum power to 200000 "
REVISION "201307160000Z"
DESCRIPTION "V1.03, Add hwPoePortPoweroffTimeRangeSwitch and hwPoePortPoweroffTimeRangeName "
REVISION "201304240000Z"
DESCRIPTION "V1.02, Add hwPoePSEPowerCut,hwPoePSEPowerCutResume,hwPoeSlotPowerCut,hwPoeSlotPowerCutResume "
REVISION "201303130000Z"
DESCRIPTION "V1.01, Add hwPoeControlChipFail and hwPoeControlChipFailResume "
::= { hwDatacomm 195 }
--
-- Node definitions
--
hwPoeGlobalObjects OBJECT IDENTIFIER ::= { hwPoeMIB 1 }
hwPoePower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum POE power of the system."
::= { hwPoeGlobalObjects 1 }
hwPoePowerRsvPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the reserved percent of total POE power."
::= { hwPoeGlobalObjects 4 }
hwPoePowerUtilizationThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the utilization threshold of total POE power."
::= { hwPoeGlobalObjects 5 }
hwPoeSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPoeSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the slot configuration table of POE."
::= { hwPoeMIB 2 }
hwPoeSlotEntry OBJECT-TYPE
SYNTAX HwPoeSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the entry of the slot configuration table of POE."
INDEX { hwPoeSlotId }
::= { hwPoeSlotTable 1 }
HwPoeSlotEntry ::=
SEQUENCE {
hwPoeSlotId
Integer32,
hwPoeSlotMaximumPower
Integer32,
hwPoeSlotAvailablePower
Integer32,
hwPoeSlotReferencePower
Integer32,
hwPoeSlotConsumingPower
Integer32,
hwPoeSlotPeakPower
Integer32,
hwPoeSlotLegacyDetect
EnabledStatus,
hwPoeSlotPowerManagementManner
INTEGER,
hwPoeSlotIsPoeDevice
OCTET STRING,
hwPoeDimmId
Integer32,
hwPoeSlotPowerRsvPercent
Integer32,
hwPoeSlotPowerUtilizationThreshold
Integer32,
hwPoeSlotMcuSupport
Integer32
}
hwPoeSlotId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the slot ID."
::= { hwPoeSlotEntry 1 }
hwPoeSlotMaximumPower OBJECT-TYPE
SYNTAX Integer32 (0..7200000)
UNITS "mW"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the maximum power set by users. The value is expressed in mW."
DEFVAL { '1B1980'h }
::= { hwPoeSlotEntry 2 }
hwPoeSlotAvailablePower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object idenfies the available Power. The value is expressed in mW."
::= { hwPoeSlotEntry 3 }
hwPoeSlotReferencePower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the total reference power of a slot. The value is expressed in mW."
::= { hwPoeSlotEntry 4 }
hwPoeSlotConsumingPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the total consuming power of a slot. The value is expressed in mW."
::= { hwPoeSlotEntry 5 }
hwPoeSlotPeakPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the total peak power of a slot. The value is expressed in mW."
::= { hwPoeSlotEntry 6 }
hwPoeSlotLegacyDetect OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the compatibility detection of a non-standard device. (1:enable; 2:disable(default))"
DEFVAL { disabled }
::= { hwPoeSlotEntry 7 }
hwPoeSlotPowerManagementManner OBJECT-TYPE
SYNTAX INTEGER
{
manual(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the power management manner. (1:manual, 2:auto(default))."
DEFVAL { auto }
::= { hwPoeSlotEntry 8 }
hwPoeSlotIsPoeDevice OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the device supports PoE."
::= { hwPoeSlotEntry 9 }
hwPoeDimmId OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the DIMM ID."
::= { hwPoeSlotEntry 10 }
hwPoeSlotPowerRsvPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the reserved percent of POE power in slot."
::= { hwPoeSlotEntry 11 }
hwPoeSlotPowerUtilizationThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the utilization threshold of total POE power in slot."
::= { hwPoeSlotEntry 12 }
hwPoeSlotMcuSupport OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the mcu chip number of a POE slot."
::= { hwPoeSlotEntry 13 }
hwPoePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the table that contains the configuration parameters of a POE interface. One entry corresponds to a POE interface."
::= { hwPoeMIB 3 }
hwPoePortEntry OBJECT-TYPE
SYNTAX HwPoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the entry of POE Port Table."
INDEX { hwPoePortIfIndex }
::= { hwPoePortTable 1 }
HwPoePortEntry ::=
SEQUENCE {
hwPoePortIfIndex
InterfaceIndex,
hwPoePortName
OCTET STRING,
hwPoePortEnable
EnabledStatus,
hwPoePortPriority
INTEGER,
hwPoePortMaximumPower
Integer32,
hwPoePortPowerOnStatus
OCTET STRING,
hwPoePortPowerStatus
OCTET STRING,
hwPoePortPdClass
Integer32,
hwPoePortReferencePower
Integer32,
hwPoePortConsumingPower
Integer32,
hwPoePortPeakPower
Integer32,
hwPoePortAveragePower
Integer32,
hwPoePortCurrent
OCTET STRING,
hwPoePortVoltage
OCTET STRING,
hwPoePortManualOperation
INTEGER,
hwPoePortPoweroffTimeRangeSwitch
EnabledStatus,
hwPoePortPoweroffTimeRangeName
OCTET STRING,
hwPoePortMaxPowerThreshold
Integer32,
hwPoePortMinPowerThreshold
Integer32,
hwPoePortLegacyDetect
EnabledStatus
}
hwPoePortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the interface index."
::= { hwPoePortEntry 1 }
hwPoePortName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the interface name."
::= { hwPoePortEntry 2 }
hwPoePortEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the enabling status of an interface. (1:enable(default); 2:disable)"
DEFVAL { enabled }
::= { hwPoePortEntry 3 }
hwPoePortPriority OBJECT-TYPE
SYNTAX INTEGER
{
critical(1),
high(2),
low(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the priority of an interface. (1:critical, 2:high, 3:low(default))"
DEFVAL { low }
::= { hwPoePortEntry 4 }
hwPoePortMaximumPower OBJECT-TYPE
SYNTAX Integer32 (0..200000)
UNITS "mW"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the maximum power of an interface.The value is expressed in mW."
DEFVAL { '9088'h }
::= { hwPoePortEntry 5 }
hwPoePortPowerOnStatus OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the powering status of an interface."
::= { hwPoePortEntry 6 }
hwPoePortPowerStatus OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the status of an interface."
::= { hwPoePortEntry 7 }
hwPoePortPdClass OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the class of a PD."
::= { hwPoePortEntry 8 }
hwPoePortReferencePower OBJECT-TYPE
SYNTAX Integer32 (0..200000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the guaranteed power of an interface. The value is expressed in mW."
::= { hwPoePortEntry 9 }
hwPoePortConsumingPower OBJECT-TYPE
SYNTAX Integer32 (0..200000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the consuming power of an interface. The value is expressed in mW."
::= { hwPoePortEntry 10 }
hwPoePortPeakPower OBJECT-TYPE
SYNTAX Integer32 (0..200000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the peak power of an interface. The value is expressed in mW."
::= { hwPoePortEntry 11 }
hwPoePortAveragePower OBJECT-TYPE
SYNTAX Integer32 (0..200000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the average power of an interface. The value is expressed in mW."
::= { hwPoePortEntry 12 }
hwPoePortCurrent OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current of an interface. The value is expressed in mA."
::= { hwPoePortEntry 13 }
hwPoePortVoltage OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the voltage of an interface. The value is expressed in V."
::= { hwPoePortEntry 14 }
hwPoePortManualOperation OBJECT-TYPE
SYNTAX INTEGER
{
powerOff(1),
powerOn(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates that a PD connected to an interface is powered on or powered off manually."
::= { hwPoePortEntry 15 }
hwPoePortPoweroffTimeRangeSwitch OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the time range of POE power off is configured on the port."
::= { hwPoePortEntry 16 }
hwPoePortPoweroffTimeRangeName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates that time range name of POE power off configured on the port."
::= { hwPoePortEntry 17 }
hwPoePortMaxPowerThreshold OBJECT-TYPE
SYNTAX Integer32 (0..200000)
UNITS "mW"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the threshold of the available maximum power of an interface. The value is expressed in mW."
DEFVAL { '9088'h }
::= { hwPoePortEntry 18 }
hwPoePortMinPowerThreshold OBJECT-TYPE
SYNTAX Integer32 (0..200000)
UNITS "mW"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the threshold of the available minimum power of an interface. The value is expressed in mW."
DEFVAL { '9088'h }
::= { hwPoePortEntry 19 }
hwPoePortLegacyDetect OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the compatibility detection of a non-standard device. (1:enable; 2:disable(default))"
DEFVAL { disabled }
::= { hwPoePortEntry 20 }
hwPoePortJudgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPoePortJudgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the table that contains the judgement of whether port supports POE."
::= { hwPoeMIB 4 }
hwPoePortJudgeEntry OBJECT-TYPE
SYNTAX HwPoePortJudgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the entry of table."
INDEX { hwPoePortJudgeIfIndex }
::= { hwPoePortJudgeTable 1 }
HwPoePortJudgeEntry ::=
SEQUENCE {
hwPoePortJudgeIfIndex
InterfaceIndex,
hwPoePortJudgeIsSupport
TruthValue
}
hwPoePortJudgeIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the interface index."
::= { hwPoePortJudgeEntry 1 }
hwPoePortJudgeIsSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the interface supports POE."
::= { hwPoePortJudgeEntry 2 }
hwPoePowerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPoePowerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the table that contains the power information of POE."
::= { hwPoeMIB 5 }
hwPoePowerInfoEntry OBJECT-TYPE
SYNTAX HwPoePowerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the entry of table."
INDEX { hwPoePowerInfoDeviceIndex }
::= { hwPoePowerInfoTable 1 }
HwPoePowerInfoEntry ::=
SEQUENCE {
hwPoePowerInfoDeviceIndex
Integer32,
hwPoePowerInfoDeviceName
OCTET STRING,
hwPoePowerInfoDeviceTotalPower
Integer32,
hwPoePowerInfoDeviceTotalAvailablePower
Integer32,
hwPoePowerInfoDeviceReservedPower
Integer32,
hwPoePowerInfoDeviceUsedPower
Integer32,
hwPoePowerInfoDeviceRemainPower
Integer32
}
hwPoePowerInfoDeviceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the device index.
Index: reserved/chassis/slot.
The index is format by 4 bytes(8bits for 1 byte): reserved is 1 byte(0x00),
chassis is 12bits and slot is also 12bits.
e.g. chassis=1, slot=0, the index is 0x00001000.
If device is chassis, the slot is always 0.
If device is box, the chassis is always 0."
::= { hwPoePowerInfoEntry 1 }
hwPoePowerInfoDeviceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the table that contains the name of device."
::= { hwPoePowerInfoEntry 2 }
hwPoePowerInfoDeviceTotalPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the table that contains the total power of POE."
::= { hwPoePowerInfoEntry 3 }
hwPoePowerInfoDeviceTotalAvailablePower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the table that contains the total available power of POE."
::= { hwPoePowerInfoEntry 4 }
hwPoePowerInfoDeviceReservedPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the table that contains the reserved power of POE."
::= { hwPoePowerInfoEntry 5 }
hwPoePowerInfoDeviceUsedPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the table that contains the used power of POE."
::= { hwPoePowerInfoEntry 6 }
hwPoePowerInfoDeviceRemainPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the table that contains the remain power of POE."
::= { hwPoePowerInfoEntry 7 }
hwPoeMultiMcuTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPoeMultiMcuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the slot configuration table of multi-mcu POE."
::= { hwPoeMIB 6 }
hwPoeMultiMcuEntry OBJECT-TYPE
SYNTAX HwPoeMultiMcuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the entry of the slot configuration table of multi-mcu POE."
INDEX { hwPoeMultiMcuSlotId, hwPoeMultiMcuMcuIndex }
::= { hwPoeMultiMcuTable 1 }
HwPoeMultiMcuEntry ::=
SEQUENCE {
hwPoeMultiMcuSlotId
Integer32,
hwPoeMultiMcuMcuIndex
Integer32,
hwPoeMultiMcuMaximumPower
Integer32,
hwPoeMultiMcuAvailablePower
Integer32,
hwPoeMultiMcuPowerRcvPercent
Integer32,
hwPoeMultiPowerUtilizationThreshold
Integer32
}
hwPoeMultiMcuSlotId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the slot ID."
::= { hwPoeMultiMcuEntry 1 }
hwPoeMultiMcuMcuIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the mcu ID."
::= { hwPoeMultiMcuEntry 2 }
hwPoeMultiMcuMaximumPower OBJECT-TYPE
SYNTAX Integer32 (0..1776000)
UNITS "mW"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the maximum power set by users in slot and mcu. The value is expressed in mW."
DEFVAL { '1B1980'h }
::= { hwPoeMultiMcuEntry 3 }
hwPoeMultiMcuAvailablePower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object idenfies the available power in slot and mcu. The value is expressed in mW."
::= { hwPoeMultiMcuEntry 4 }
hwPoeMultiMcuPowerRcvPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the reserved percent of POE power in slot and mcu."
::= { hwPoeMultiMcuEntry 5 }
hwPoeMultiPowerUtilizationThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the utilization threshold of total POE power in slot and mcu."
::= { hwPoeMultiMcuEntry 6 }
hwPoeTrapObjects OBJECT IDENTIFIER ::= { hwPoeMIB 39 }
hwPoePdPriority OBJECT-TYPE
SYNTAX INTEGER
{
critical(1),
high(2),
low(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the PD priority.(1:critical, 2:high, 3:low(default))"
::= { hwPoeTrapObjects 1 }
hwPoeSlotNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the slot ID."
::= { hwPoeTrapObjects 2 }
hwPoeCurConsumPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the current consuming power."
::= { hwPoeTrapObjects 3 }
hwPoeConsumPowerThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the threshold of consuming power."
::= { hwPoeTrapObjects 4 }
hwPoeDeviceID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the device ID."
::= { hwPoeTrapObjects 5 }
hwFrameID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the CSS Frame ID."
::= { hwPoeTrapObjects 6 }
hwPoeChipID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the control chip ID."
::= { hwPoeTrapObjects 7 }
hwTrapProbableCause OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The probable cause of poe trap."
::= { hwPoeTrapObjects 8 }
hwPoeCardID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the poe card ID."
::= { hwPoeTrapObjects 9 }
hwPoeSlotStr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object identifies the poe card String."
::= { hwPoeTrapObjects 10 }
hwPoeTrapFaultID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The probable fault id of poe trap."
::= { hwPoeTrapObjects 11 }
hwPoeNotification OBJECT IDENTIFIER ::= { hwPoeMIB 40 }
hwPoeDimmError NOTIFICATION-TYPE
OBJECTS { hwPoeSlotNum, hwPoeDimmId }
STATUS current
DESCRIPTION
"This object indicates the Dimm chip error."
::= { hwPoeNotification 1 }
hwPoePowerOff NOTIFICATION-TYPE
OBJECTS { hwPoePortName, hwPoeTrapFaultID }
STATUS current
DESCRIPTION
"This object indicates a PD connected to an interface is powered off."
::= { hwPoeNotification 2 }
hwPoePowerOn NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that a PD connected to an interface is powered on."
::= { hwPoeNotification 3 }
hwPoeSlotPowerOverload NOTIFICATION-TYPE
OBJECTS { hwPoeSlotNum, hwPoeSlotConsumingPower }
STATUS current
DESCRIPTION
"This object indicates that the power consumed by a slot exceeds the threshold."
::= { hwPoeNotification 4 }
hwPoeSlotPowerOverloadResume NOTIFICATION-TYPE
OBJECTS { hwPoeSlotNum, hwPoeSlotConsumingPower }
STATUS current
DESCRIPTION
"This object indicates that the power consumed by a slot does not exceed the threshold."
::= { hwPoeNotification 5 }
hwPoePdPowerOverload NOTIFICATION-TYPE
OBJECTS { hwPoePortName, hwPoePortConsumingPower, hwPoePortMaximumPower }
STATUS current
DESCRIPTION
"This object indicates the power consumed by a PD connected to an interface exceeds the threshold."
::= { hwPoeNotification 6 }
hwPoePdPowerOverloadResume NOTIFICATION-TYPE
OBJECTS { hwPoePortName, hwPoePortConsumingPower, hwPoePortMaximumPower }
STATUS current
DESCRIPTION
"This object indicates that the power consumed by a PD connected to an interface does not exceed the threshold."
::= { hwPoeNotification 7 }
hwPoePdConnected NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that a PD is connected to an interface."
::= { hwPoeNotification 8 }
hwPoePdDisconnected NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that a PD is disconnected from an interface."
::= { hwPoeNotification 9 }
hwPoePdClassInvalid NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that a PD of an invalid class is detected."
::= { hwPoeNotification 10 }
hwPoePdClassOvercurrent NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that overcurrent occurs during the classification of a PD."
::= { hwPoeNotification 11 }
hwPoePdPowerOvercurrent NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that overcurrent occurs during the powering of a PD."
::= { hwPoeNotification 12 }
hwPoePdPowerOvercurrentResume NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that overcurrent is rectified."
::= { hwPoeNotification 13 }
hwPoePowerOnFail NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that a PD fails to be powered on."
::= { hwPoeNotification 14 }
hwPoePowerOffCurrentLimits NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that a PD is powered off because its current meets or exceeds the limit of current."
::= { hwPoeNotification 15 }
hwPoePdPriorityDifferent NOTIFICATION-TYPE
OBJECTS { hwPoePortName, hwPoePortPriority, hwPoePdPriority }
STATUS current
DESCRIPTION
"This object indicates that the priority of PD is different from the port."
::= { hwPoeNotification 16 }
hwPoePowerOverUtilizationThreshold NOTIFICATION-TYPE
OBJECTS { hwPoeDeviceID, hwPoeCurConsumPower, hwPoeConsumPowerThreshold}
STATUS current
DESCRIPTION
"This object indicates that the PSE is overdrawing power."
::= { hwPoeNotification 17 }
hwPoePowerOverUtilizationThresholdResume NOTIFICATION-TYPE
OBJECTS { hwPoeDeviceID, hwPoeCurConsumPower, hwPoeConsumPowerThreshold}
STATUS current
DESCRIPTION
"This object indicates that the PSE is not overdrawing power."
::= { hwPoeNotification 18 }
hwPoeBoardInsertedWrongFrame NOTIFICATION-TYPE
OBJECTS {hwFrameID, hwPoeSlotNum }
STATUS current
DESCRIPTION
"This object indicates that the poe board is inserted in the frame does not support poe."
::= { hwPoeNotification 19 }
hwPoePowerAbsent NOTIFICATION-TYPE
OBJECTS {hwFrameID, hwPoeSlotNum }
STATUS current
DESCRIPTION
"This object indicates that the poe power is absent."
::= { hwPoeNotification 20 }
hwPoePowerAbsentResume NOTIFICATION-TYPE
OBJECTS {hwFrameID, hwPoeSlotNum }
STATUS current
DESCRIPTION
"This object indicates that the poe power is present."
::= { hwPoeNotification 21 }
hwPoeRpsPowerOutputAlarm NOTIFICATION-TYPE
OBJECTS {hwPoeSlotNum }
STATUS current
DESCRIPTION
"This object indicates that the RPS power can not provide POE power for this device."
::= { hwPoeNotification 22 }
hwPoeRpsPowerOutputAlarmResume NOTIFICATION-TYPE
OBJECTS {hwPoeSlotNum }
STATUS current
DESCRIPTION
"This object indicates that the RPS power can provide POE power for this device."
::= { hwPoeNotification 23 }
hwPoeControlChipFail NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotNum }
STATUS current
DESCRIPTION
"This object indicates that the poe control chip is failed."
::= { hwPoeNotification 24 }
hwPoeControlChipFailResume NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotNum }
STATUS current
DESCRIPTION
"This object indicates that the poe control chip has resumed."
::= { hwPoeNotification 25 }
hwPoePSEPowerCut NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This object indicates that the poe pse power is not enough."
::= { hwPoeNotification 26 }
hwPoePSEPowerCutResume NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This object indicates that the poe pse power cut has resumed."
::= { hwPoeNotification 27 }
hwPoeSlotPowerCut NOTIFICATION-TYPE
OBJECTS {hwPoeSlotNum}
STATUS current
DESCRIPTION
"This object indicates that the poe slot power is not enough."
::= { hwPoeNotification 28 }
hwPoeSlotPowerCutResume NOTIFICATION-TYPE
OBJECTS {hwPoeSlotNum}
STATUS current
DESCRIPTION
"This object indicates that the poe slot power cut has resumed."
::= { hwPoeNotification 29 }
hwPoeNotAvailable NOTIFICATION-TYPE
OBJECTS {hwFrameID,hwPoeSlotNum,hwTrapProbableCause}
STATUS current
DESCRIPTION
"PoE function is not available."
::= { hwPoeNotification 30 }
hwPoeNotAvailableResume NOTIFICATION-TYPE
OBJECTS {hwFrameID,hwPoeSlotNum}
STATUS current
DESCRIPTION
"PoE function is available."
::= { hwPoeNotification 31 }
hwPoeCardAbsent NOTIFICATION-TYPE
OBJECTS {hwPoeSlotNum,hwPoeCardID}
STATUS current
DESCRIPTION
"This object indicates that the poe card is absent."
::= { hwPoeNotification 32 }
hwPoePortFail NOTIFICATION-TYPE
OBJECTS {hwPoePortName}
STATUS current
DESCRIPTION
"This object indicates that the poe port is abnormal."
::= { hwPoeNotification 33 }
hwPoePortFailResume NOTIFICATION-TYPE
OBJECTS {hwPoePortName}
STATUS current
DESCRIPTION
"This object indicates that the poe port has recoverd."
::= { hwPoeNotification 34 }
hwPdPowerCut NOTIFICATION-TYPE
OBJECTS {hwPoePortName,hwPoeTrapFaultID}
STATUS current
DESCRIPTION
"PoE power is not enough."
::= { hwPoeNotification 35 }
hwPdPowerCutResume NOTIFICATION-TYPE
OBJECTS {hwPoePortName,hwPoeTrapFaultID}
STATUS current
DESCRIPTION
"PoE power is enough."
::= { hwPoeNotification 36 }
hwPoeChipFail NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"This object indicates that the poe chip is failed."
::= { hwPoeNotification 37 }
hwPoeChipFailResume NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"This object indicates that the poe chip has resumed."
::= { hwPoeNotification 38 }
hwPdVltLow NOTIFICATION-TYPE
OBJECTS {hwPoePortName}
STATUS current
DESCRIPTION
"PD voltage is lower."
::= { hwPoeNotification 39 }
hwPdVltLowResume NOTIFICATION-TYPE
OBJECTS {hwPoePortName}
STATUS current
DESCRIPTION
"PD voltage becomes normal from lower."
::= { hwPoeNotification 40 }
hwPdVltHigh NOTIFICATION-TYPE
OBJECTS {hwPoePortName}
STATUS current
DESCRIPTION
"PD voltage is high."
::= { hwPoeNotification 41 }
hwPdVltHighResume NOTIFICATION-TYPE
OBJECTS {hwPoePortName}
STATUS current
DESCRIPTION
"PD voltage becomes normal from high."
::= { hwPoeNotification 42 }
hwPseVltLow NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"PSE voltage is lower."
::= { hwPoeNotification 43 }
hwPseVltLowResume NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"PSE voltage becomes normal from lower."
::= { hwPoeNotification 44 }
hwPoePdOvercurrentPoweroff NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that the PD is power off due to overcurrent."
::= { hwPoeNotification 45 }
hwPoePdOverloadPoweroff NOTIFICATION-TYPE
OBJECTS { hwPoePortName }
STATUS current
DESCRIPTION
"This object indicates that the PD is power off due to overload."
::= { hwPoeNotification 46 }
hwPoeSubCardAbsent NOTIFICATION-TYPE
OBJECTS {hwPoeCardID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"This object indicates that the poe subcard is absent."
::= { hwPoeNotification 47 }
hwPoeSubCardAbsentResume NOTIFICATION-TYPE
OBJECTS {hwPoeCardID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"This object indicates that the poe subcard is re-installed."
::= { hwPoeNotification 48 }
hwPoeCommunicateFail NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"This object indicates that the poe communication fails."
::= { hwPoeNotification 49 }
hwPoeCommunicateFailResume NOTIFICATION-TYPE
OBJECTS {hwPoeChipID,hwPoeSlotStr}
STATUS current
DESCRIPTION
"This object indicates that the poe communication has resumed."
::= { hwPoeNotification 50 }
hwPoeConformance OBJECT IDENTIFIER ::= { hwPoeMIB 100 }
hwPoeCompliances OBJECT IDENTIFIER ::= { hwPoeConformance 1 }
hwPoeCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting this module."
MODULE
MANDATORY-GROUPS
{
hwPoeSlotGroup, hwPoePortGroup, hwPoeGlobalGroup,
hwPoeNotificationGroup, hwPoeTrapObjectsGroup, hwPoePowerInfoGroup
}
::= { hwPoeCompliances 1 }
hwPoeGroups OBJECT IDENTIFIER ::= { hwPoeConformance 2 }
hwPoeSlotGroup OBJECT-GROUP
OBJECTS { hwPoeSlotMaximumPower, hwPoeSlotReferencePower, hwPoeSlotConsumingPower, hwPoeSlotPeakPower, hwPoeSlotPowerManagementManner,
hwPoeSlotIsPoeDevice, hwPoeSlotLegacyDetect, hwPoeSlotPowerRsvPercent, hwPoeSlotPowerUtilizationThreshold, hwPoeSlotMcuSupport,
hwPoeDimmId, hwPoeSlotAvailablePower }
STATUS current
DESCRIPTION
"This object indicates the POE's slot table group."
::= { hwPoeGroups 1 }
hwPoePortGroup OBJECT-GROUP
OBJECTS { hwPoePortEnable, hwPoePortPriority, hwPoePortMaximumPower, hwPoePortPowerOnStatus, hwPoePortPowerStatus,
hwPoePortReferencePower, hwPoePortName, hwPoePortConsumingPower, hwPoePortPeakPower, hwPoePortAveragePower,
hwPoePortCurrent, hwPoePortVoltage, hwPoePortManualOperation, hwPoePortPdClass,hwPoePortJudgeIsSupport,
hwPoePortPoweroffTimeRangeSwitch, hwPoePortPoweroffTimeRangeName,
hwPoePortMaxPowerThreshold, hwPoePortMinPowerThreshold, hwPoePortLegacyDetect}
STATUS current
DESCRIPTION
"This object indicates the POE's port table group."
::= { hwPoeGroups 2 }
hwPoeGlobalGroup OBJECT-GROUP
OBJECTS { hwPoePowerUtilizationThreshold, hwPoePowerRsvPercent, hwPoePower }
STATUS current
DESCRIPTION
"This object indicates the POE's global table group."
::= { hwPoeGroups 3 }
hwPoeNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwPoeDimmError, hwPoePowerOff, hwPoePowerOn, hwPoePdPowerOverload, hwPoePdPowerOverloadResume,
hwPoePdConnected, hwPoePdDisconnected, hwPoePdClassInvalid, hwPoePdClassOvercurrent, hwPoePdPowerOvercurrent,
hwPoePdPowerOvercurrentResume, hwPoePowerOnFail, hwPoePowerOffCurrentLimits, hwPoePowerOverUtilizationThresholdResume ,
hwPoePowerOverUtilizationThreshold , hwPoePdPriorityDifferent, hwPoeSlotPowerOverload, hwPoeSlotPowerOverloadResume ,
hwPoeBoardInsertedWrongFrame ,hwPoePowerAbsent,hwPoePowerAbsentResume,
hwPoeRpsPowerOutputAlarm, hwPoeRpsPowerOutputAlarmResume,
hwPoeControlChipFail, hwPoeControlChipFailResume,
hwPoePSEPowerCut,hwPoePSEPowerCutResume,hwPoeSlotPowerCut,hwPoeSlotPowerCutResume,
hwPoeNotAvailable,hwPoeNotAvailableResume,hwPoeCardAbsent,hwPoePortFail,hwPoePortFailResume,
hwPdPowerCut,hwPdPowerCutResume,hwPoeChipFail,hwPoeChipFailResume,hwPdVltLow,hwPdVltLowResume,
hwPdVltHigh,hwPdVltHighResume,hwPseVltLow,hwPseVltLowResume,hwPoePdOvercurrentPoweroff,hwPoePdOverloadPoweroff,
hwPoeSubCardAbsent,hwPoeSubCardAbsentResume,hwPoeCommunicateFail,hwPoeCommunicateFailResume}
STATUS current
DESCRIPTION
"This object indicates the POE's notification table group."
::= { hwPoeGroups 4 }
hwPoeTrapObjectsGroup OBJECT-GROUP
OBJECTS { hwPoePdPriority, hwPoeSlotNum, hwPoeCurConsumPower,hwPoeConsumPowerThreshold,hwPoeDeviceID,hwFrameID,hwPoeChipID ,hwTrapProbableCause,hwPoeCardID,hwPoeSlotStr,hwPoeTrapFaultID}
STATUS current
DESCRIPTION
"Description."
::= { hwPoeGroups 5 }
hwPoePowerInfoGroup OBJECT-GROUP
OBJECTS { hwPoePowerInfoDeviceName, hwPoePowerInfoDeviceTotalPower, hwPoePowerInfoDeviceTotalAvailablePower, hwPoePowerInfoDeviceReservedPower,
hwPoePowerInfoDeviceUsedPower, hwPoePowerInfoDeviceRemainPower }
STATUS current
DESCRIPTION
"This object indicates the POE's power information table group."
::= { hwPoeGroups 6 }
hwPoeMultiMcuGroup OBJECT-GROUP
OBJECTS { hwPoeMultiMcuMaximumPower, hwPoeMultiMcuAvailablePower, hwPoeMultiMcuPowerRcvPercent, hwPoeMultiPowerUtilizationThreshold }
STATUS current
DESCRIPTION
"This object indicates the POE's multi-mcu table group."
::= { hwPoeGroups 7 }
END
--
-- HUAWEI-POE-MIB.mib
--