mibs/junos/JUNIPER-MIB
--
-- Juniper Enterprise Specific MIB: Chassis MIB
--
-- Copyright (c) 1998-2008, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Gauge32, Counter32
FROM SNMPv2-SMI
DisplayString, TimeStamp, TimeInterval, TEXTUAL-CONVENTION, DateAndTime
FROM SNMPv2-TC
jnxMibs, jnxChassisTraps, jnxChassisOKTraps
FROM JUNIPER-SMI;
jnxBoxAnatomy MODULE-IDENTITY
LAST-UPDATED "201010220000Z" -- Fri Oct 22 00:00:00 2008 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1194 N. Mathilda Avenue
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"The MIB modules representing Juniper Networks'
implementation of enterprise specific MIBs
supported by a single SNMP agent."
REVISION "201010220000Z"
DESCRIPTION
"Added load average variables"
REVISION "200403230000Z"
DESCRIPTION
"Added chassis identification objects."
REVISION "200406300000Z" -- July 30, 2004
DESCRIPTION
"Added following new traps for chassis
alarm conditions: jnxFruFailed, jnxFruOffline
and jnxFruOnline."
REVISION "200409170000Z" -- Sep 17, 2004
DESCRIPTION
"Added new traps for chassis
alarm condition jnxFruCheck."
REVISION "200507180000Z" -- Jul 18, 2005
DESCRIPTION
"Added new fru type FEB in jnxFruType enumeration."
REVISION "200507190000Z" -- Jul 19, 2005
DESCRIPTION
"Added new offline reason pfeVersionMismatch
to jnxFruOfflineReason enumeration."
REVISION "200611200000Z" -- Nov 20, 2006
DESCRIPTION
"Added new offline reason fruFebOffline
to jnxFruOfflineReason enumeration."
REVISION "200807310000Z" -- Jul 31, 2008
DESCRIPTION
"Added jnxBoxSystemDomainType object."
REVISION "200808010000Z" -- Aug 01, 2008
DESCRIPTION
"Added new fru type PSD to jnxFruType enumeration and
added jcsX chassis IDs to JnxChassisId enumeration."
REVISION "200812310000Z" -- Dec 31, 2008
DESCRIPTION "Added nodeX chassis IDs to JnxChassisId enumeration."
REVISION "200901090000Z" -- Jan 09, 2009
DESCRIPTION
"Added sfcX and lcc4-lcc15 chassis IDs to JnxChassisId
enumeration."
::= { jnxMibs 1 }
--
-- Textual Conventions
--
JnxChassisId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Identifies a specific router chassis."
SYNTAX INTEGER {
unknown (1),
singleChassis (2),
scc (3),
lcc0 (4),
lcc1 (5),
lcc2 (6),
lcc3 (7),
jcs1 (8),
jcs2 (9),
jcs3 (10),
jcs4 (11),
node0 (12),
node1 (13),
sfc0 (14),
sfc1 (15),
sfc2 (16),
sfc3 (17),
sfc4 (18),
lcc4 (19),
lcc5 (20),
lcc6 (21),
lcc7 (22),
lcc8 (23),
lcc9 (24),
lcc10 (25),
lcc11 (26),
lcc12 (27),
lcc13 (28),
lcc14 (29),
lcc15 (30),
member0 (31),
member1 (32),
member2 (33),
member3 (34),
member4 (35),
member5 (36),
member6 (37),
member7 (38)
}
-- Juniper Box Anatomy MIB
--
-- Top level objects
jnxBoxClass OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The class of the box, indicating which product line
the box is about, for example, 'Internet Router'."
::= { jnxBoxAnatomy 1 }
jnxBoxDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name, model, or detailed description of the box,
indicating which product the box is about, for example
'M40'."
::= { jnxBoxAnatomy 2 }
jnxBoxSerialNo OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of this subject, blank if unknown
or unavailable."
::= { jnxBoxAnatomy 3 }
jnxBoxRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The revision of this subject, blank if unknown or
unavailable."
::= { jnxBoxAnatomy 4 }
jnxBoxInstalled OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the subject was last
installed, up-and-running. Zero if unknown or
already up-and-running when the agent was up."
::= { jnxBoxAnatomy 5 }
--
-- Box Containers Table
--
jnxContainersTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxContainersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of containers entries."
::= { jnxBoxAnatomy 6 }
jnxContainersEntry OBJECT-TYPE
SYNTAX JnxContainersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of containers table."
INDEX { jnxContainersIndex }
::= { jnxContainersTable 1 }
JnxContainersEntry ::= SEQUENCE {
jnxContainersIndex Integer32,
jnxContainersView Integer32,
jnxContainersLevel Integer32,
jnxContainersWithin Integer32,
jnxContainersType OBJECT IDENTIFIER,
jnxContainersDescr DisplayString,
jnxContainersCount Integer32
}
jnxContainersIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index for this entry."
::= { jnxContainersEntry 1 }
jnxContainersView OBJECT-TYPE
SYNTAX Integer32 (1..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The view(s) from which the specific container
appears.
This variable indicates that the specific container
is embedded and accessible from the corresponding
view(s).
The value is a bit map represented as a sum.
If multiple bits are set, the specified
container(s) are located and accessible from
that set of views.
The various values representing the bit positions
and its corresponding views are:
1 front
2 rear
4 top
8 bottom
16 leftHandSide
32 rightHandSide
Note 1:
LefHandSide and rightHandSide are referred
to based on the view from the front.
Note 2:
If the specified containers are scattered
around various views, the numbering is according
to the following sequence:
front -> rear -> top -> bottom
-> leftHandSide -> rightHandSide
For each view plane, the numbering sequence is
first from left to right, and then from up to down.
Note 3:
Even though the value in chassis hardware (e.g.
slot number) may be labelled from 0, 1, 2, and up,
all the indices in MIB start with 1 (not 0)
according to network management convention."
::= { jnxContainersEntry 2 }
jnxContainersLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The abstraction level of the box or chassis.
It is enumerated from the outside to the inside,
from the outer layer to the inner layer.
For example, top level (i.e. level 0) refers to
chassis frame, level 1 FPC slot within chassis
frame, level 2 PIC space within FPC slot."
::= { jnxContainersEntry 3 }
jnxContainersWithin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of its next higher level container
housing this entry. The associated
jnxContainersIndex in the jnxContainersTable
represents its next higher level container."
::= { jnxContainersEntry 4 }
jnxContainersType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this container."
::= { jnxContainersEntry 5 }
jnxContainersDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name or detailed description of this
subject."
::= { jnxContainersEntry 6 }
jnxContainersCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of containers of this level
per container of the next higher level.
e.g. if there are six level 2 containers in
level 1 container, then jnxContainersCount for
level 2 is six."
::= { jnxContainersEntry 7 }
--
-- Box Contents Table
--
jnxContentsLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the box contents
table last changed. Zero if unknown or already
existing when the agent was up."
::= { jnxBoxAnatomy 7 }
jnxContentsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxContentsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of contents entries."
::= { jnxBoxAnatomy 8 }
jnxContentsEntry OBJECT-TYPE
SYNTAX JnxContentsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of contents table."
INDEX { jnxContentsContainerIndex,
jnxContentsL1Index,
jnxContentsL2Index,
jnxContentsL3Index }
::= { jnxContentsTable 1 }
JnxContentsEntry ::= SEQUENCE {
jnxContentsContainerIndex Integer32,
jnxContentsL1Index Integer32,
jnxContentsL2Index Integer32,
jnxContentsL3Index Integer32,
jnxContentsType OBJECT IDENTIFIER,
jnxContentsDescr DisplayString,
jnxContentsSerialNo DisplayString,
jnxContentsRevision DisplayString,
jnxContentsInstalled TimeStamp,
jnxContentsPartNo DisplayString,
jnxContentsChassisId JnxChassisId,
jnxContentsChassisDescr DisplayString,
jnxContentsChassisCleiCode DisplayString
}
jnxContentsContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated jnxContainersIndex in the
jnxContainersTable."
::= { jnxContentsEntry 1 }
jnxContentsL1Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level one index of the container
housing this subject. Zero if unavailable
or inapplicable."
::= { jnxContentsEntry 2 }
jnxContentsL2Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level two index of the container
housing this subject. Zero if unavailable
or inapplicable."
::= { jnxContentsEntry 3 }
jnxContentsL3Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level three index of the container
housing this subject. Zero if unavailable
or inapplicable."
::= { jnxContentsEntry 4 }
jnxContentsType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this subject. zeroDotZero
if unknown."
::= { jnxContentsEntry 5 }
jnxContentsDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name or detailed description of this
subject."
::= { jnxContentsEntry 6 }
jnxContentsSerialNo OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of this subject, blank if
unknown or unavailable."
::= { jnxContentsEntry 7 }
jnxContentsRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The revision of this subject, blank if unknown
or unavailable."
::= { jnxContentsEntry 8 }
jnxContentsInstalled OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the subject was last
installed, up-and-running. Zero if unknown
or already up-and-running when the agent was up."
::= { jnxContentsEntry 9 }
jnxContentsPartNo OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The part number of this subject, blank if unknown
or unavailable."
::= { jnxContentsEntry 10 }
jnxContentsChassisId OBJECT-TYPE
SYNTAX JnxChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the chassis on which the contents of this
row exists."
::= { jnxContentsEntry 11 }
jnxContentsChassisDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the chassis on which the
contents of this row exists."
::= { jnxContentsEntry 12 }
jnxContentsChassisCleiCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The clei code of this subject, blank if unknown
or unavailable.
A CLEI code is an intelligent code that consists of 10
alphanumeric characters with 4 data elements. The first data
element is considered the basic code with the first 2 characters
indicating the technology or equipment type, and the third and
fourth characters denoting the functional sub-category. The
second data element represents the features, and its three
characters denote functional capabilities or changes. The third
data element has one character and denotes a reference to a
manufacturer, system ID, specification, or drawing. The fourth
data element consists of two characters and contains complementary
data. These two characters provide a means of differentiating or
providing uniqueness between the eight character CLEI codes by
identifying the manufacturing vintage of the product. Names are
assigned via procedures defined in [GR485].
The assigned maintenance agent for the CLEI code, Telcordia
Technologies, is responsible for assigning certain equipment and
other identifiers (e.g., location, manufacturer/supplier) for the
telecommunications industry."
::= { jnxContentsEntry 13 }
--
-- Box LED Indicators Table
--
jnxLEDLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of sysUpTime when the box LED table
last changed. Zero if unknown or already at
that state when the agent was up."
::= { jnxBoxAnatomy 9 }
jnxLEDTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxLEDEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A list of status entries."
::= { jnxBoxAnatomy 10 }
jnxLEDEntry OBJECT-TYPE
SYNTAX JnxLEDEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry of status table."
INDEX { jnxLEDAssociateTable,
jnxLEDAssociateIndex,
jnxLEDL1Index,
jnxLEDL2Index,
jnxLEDL3Index }
::= { jnxLEDTable 1 }
JnxLEDEntry ::= SEQUENCE {
jnxLEDAssociateTable INTEGER,
jnxLEDAssociateIndex Integer32,
jnxLEDL1Index Integer32,
jnxLEDL2Index Integer32,
jnxLEDL3Index Integer32,
jnxLEDOriginator OBJECT IDENTIFIER,
jnxLEDDescr DisplayString,
jnxLEDState INTEGER,
jnxLEDStateOrdered INTEGER
}
jnxLEDAssociateTable OBJECT-TYPE
SYNTAX INTEGER {
other(1),
jnxContainersTable(2),
jnxContentsTable(3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The associated table that this entry is
related."
::= { jnxLEDEntry 1 }
jnxLEDAssociateIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7fffffff'h)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The index of the associated table that this
entry is related."
::= { jnxLEDEntry 2 }
jnxLEDL1Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The level one index of the associated
table that this entry is related. Zero
if unavailable or inapplicable."
::= { jnxLEDEntry 3 }
jnxLEDL2Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The level two index of the associated
table that this entry is related. Zero
if unavailable or inapplicable."
::= { jnxLEDEntry 4 }
jnxLEDL3Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The level three index of the associated
table that this entry is related. Zero
if unavailable or inapplicable."
::= { jnxLEDEntry 5 }
jnxLEDOriginator OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The originator of the this entry."
::= { jnxLEDEntry 6 }
jnxLEDDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The name or detailed description of this subject."
::= { jnxLEDEntry 7 }
jnxLEDState OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- unknown or unavailable
green(2), -- ok, good, normally working,
-- or on-line as a standby backup if
-- there is an active primary
yellow(3), -- alarm, warning, marginally working
red(4), -- alert, failed, not working
blue(5), -- ok, on-line as an active primary
amber(6) -- alarm, off-line, not running
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The state of the LED indicator."
::= { jnxLEDEntry 8 }
jnxLEDStateOrdered OBJECT-TYPE
SYNTAX INTEGER {
blue(1), -- ok, on-line as an active primary
green(2), -- ok, good, normally working,
-- or on-line as a standby backup if
-- there is an active primary
amber(3), -- alarm, off-line, not running
yellow(4), -- alarm, warning, marginally working
red(5), -- alert, failed, not working
other(6) -- unknown or unavailable
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The state of the LED indicator. Identical to jnxLEDState, but
with enums ordered from 'most operational' to 'least
operational' states."
::= { jnxLEDEntry 9 }
--
-- Box Filled Status Table
--
-- This table show the empty/filled status of the container in the
-- box containers table.
--
jnxFilledLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the box filled
status table last changed. Zero if unknown or
already at that state when the agent was up."
::= { jnxBoxAnatomy 11 }
jnxFilledTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxFilledEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of filled status entries."
::= { jnxBoxAnatomy 12 }
jnxFilledEntry OBJECT-TYPE
SYNTAX JnxFilledEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of filled status table."
INDEX { jnxFilledContainerIndex,
jnxFilledL1Index,
jnxFilledL2Index,
jnxFilledL3Index }
::= { jnxFilledTable 1 }
JnxFilledEntry ::= SEQUENCE {
jnxFilledContainerIndex Integer32,
jnxFilledL1Index Integer32,
jnxFilledL2Index Integer32,
jnxFilledL3Index Integer32,
jnxFilledDescr DisplayString,
jnxFilledState INTEGER,
jnxFilledChassisId JnxChassisId,
jnxFilledChassisDescr DisplayString
}
jnxFilledContainerIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated jnxContainersIndex in the
jnxContainersTable."
::= { jnxFilledEntry 1 }
jnxFilledL1Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level one index of the container
housing this subject. Zero if unavailable
or inapplicable."
::= { jnxFilledEntry 2 }
jnxFilledL2Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level two index of the container
housing this subject. Zero if unavailable
or inapplicable."
::= { jnxFilledEntry 3 }
jnxFilledL3Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level three index of the container
housing this subject. Zero if unavailable
or inapplicable."
::= { jnxFilledEntry 4 }
jnxFilledDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name or detailed description of this
subject."
::= { jnxFilledEntry 5 }
jnxFilledState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
empty(2),
filled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The filled state of this subject."
::= { jnxFilledEntry 6 }
jnxFilledChassisId OBJECT-TYPE
SYNTAX JnxChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the chassis on which the contents of this
row exists."
::= { jnxFilledEntry 7 }
jnxFilledChassisDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the chassis on which the
contents of this row exists."
::= { jnxFilledEntry 8 }
--
-- Box Operating Status Table
--
-- This table reveals the operating status of some subjects
-- of interest in the box contents table.
--
jnxOperatingTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxOperatingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of operating status entries."
::= { jnxBoxAnatomy 13 }
jnxOperatingEntry OBJECT-TYPE
SYNTAX JnxOperatingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of operating status table."
INDEX { jnxOperatingContentsIndex,
jnxOperatingL1Index,
jnxOperatingL2Index,
jnxOperatingL3Index }
::= { jnxOperatingTable 1 }
JnxOperatingEntry ::= SEQUENCE {
jnxOperatingContentsIndex Integer32,
jnxOperatingL1Index Integer32,
jnxOperatingL2Index Integer32,
jnxOperatingL3Index Integer32,
jnxOperatingDescr DisplayString,
jnxOperatingState INTEGER,
jnxOperatingTemp Gauge32,
jnxOperatingCPU Gauge32,
jnxOperatingISR Gauge32,
jnxOperatingDRAMSize Integer32,
jnxOperatingBuffer Gauge32,
jnxOperatingHeap Gauge32,
jnxOperatingUpTime TimeInterval,
jnxOperatingLastRestart TimeStamp,
jnxOperatingMemory Integer32,
jnxOperatingStateOrdered INTEGER,
jnxOperatingChassisId JnxChassisId,
jnxOperatingChassisDescr DisplayString,
jnxOperatingRestartTime DateAndTime,
jnxOperating1MinLoadAvg Gauge32,
jnxOperating5MinLoadAvg Gauge32,
jnxOperating15MinLoadAvg Gauge32
}
jnxOperatingContentsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex in the
jnxContentsTable."
::= { jnxOperatingEntry 1 }
jnxOperatingL1Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level one index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 2 }
jnxOperatingL2Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level two index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 3 }
jnxOperatingL3Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level three index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 4 }
jnxOperatingDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name or detailed description of this subject."
::= { jnxOperatingEntry 5 }
jnxOperatingState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
running(2), -- up and running,
-- as a active primary
ready(3), -- ready to run, not running yet
reset(4), -- held in reset, not ready yet
runningAtFullSpeed(5),
-- valid for fans only
down(6), -- down or off, for power supply
standby(7) -- running as a standby backup
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating state of this subject."
::= { jnxOperatingEntry 6 }
jnxOperatingTemp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature in Celsius (degrees C) of this
subject. Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 7 }
jnxOperatingCPU OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization in percentage of this
subject. Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 8 }
jnxOperatingISR OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU utilization in percentage of this subject
spending in interrupt service routine (ISR).
Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 9 }
jnxOperatingDRAMSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The DRAM size in bytes of this subject.
Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 10 }
jnxOperatingBuffer OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer pool utilization in percentage
of this subject. Zero if unavailable or
inapplicable."
::= { jnxOperatingEntry 11 }
jnxOperatingHeap OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The heap utilization in percentage of
this subject. Zero if unavailable or
inapplicable."
::= { jnxOperatingEntry 12 }
jnxOperatingUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time interval in 10-millisecond period
that this subject has been up and running.
Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 13 }
jnxOperatingLastRestart OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this subject
last restarted. Zero if unavailable or
inapplicable."
::= { jnxOperatingEntry 14 }
jnxOperatingMemory OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The installed memory size in Megabytes
of this subject. Zero if unavailable or
inapplicable."
::= { jnxOperatingEntry 15 }
jnxOperatingStateOrdered OBJECT-TYPE
SYNTAX INTEGER {
running(1), -- up and running,
-- as a active primary
standby(2), -- running as a standby backup
ready(3), -- ready to run, not running yet
runningAtFullSpeed(4),
-- valid for fans only
reset(5), -- held in reset, not ready yet
down(6), -- down or off, for power supply
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating state of this subject. Identical to
jnxOperatingState, but with enums ordered from 'most
operational' to 'least operational' states."
::= { jnxOperatingEntry 16 }
jnxOperatingChassisId OBJECT-TYPE
SYNTAX JnxChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the chassis on which the contents of this
row exists."
::= { jnxOperatingEntry 17 }
jnxOperatingChassisDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the chassis on which the
contents of this row exists."
::= { jnxOperatingEntry 18 }
jnxOperatingRestartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which this entity
last restarted."
::= { jnxOperatingEntry 19 }
jnxOperating1MinLoadAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Load Average over the last 1 minutes
Here it will be shown as percentage value
Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 20 }
jnxOperating5MinLoadAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Load Average over the last 5 minutes
Here it will be shown as percentage value
Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 21 }
jnxOperating15MinLoadAvg OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CPU Load Average over the last 15 minutes
Here it will be shown as percentage value
Zero if unavailable or inapplicable."
::= { jnxOperatingEntry 22 }
--
-- Box Redundancy Information Table
--
-- This table shows the internal configuration setting for the
-- available redundant subsystems or components in the box.
--
jnxRedundancyTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxRedundancyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of redundancy information entries."
::= { jnxBoxAnatomy 14 }
jnxRedundancyEntry OBJECT-TYPE
SYNTAX JnxRedundancyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the redundancy information table."
INDEX { jnxRedundancyContentsIndex,
jnxRedundancyL1Index,
jnxRedundancyL2Index,
jnxRedundancyL3Index }
::= { jnxRedundancyTable 1 }
JnxRedundancyEntry ::= SEQUENCE {
jnxRedundancyContentsIndex Integer32,
jnxRedundancyL1Index Integer32,
jnxRedundancyL2Index Integer32,
jnxRedundancyL3Index Integer32,
jnxRedundancyDescr DisplayString,
jnxRedundancyConfig INTEGER,
jnxRedundancyState INTEGER,
jnxRedundancySwitchoverCount Counter32,
jnxRedundancySwitchoverTime TimeStamp,
jnxRedundancySwitchoverReason INTEGER,
jnxRedundancyKeepaliveHeartbeat Integer32,
jnxRedundancyKeepaliveTimeout Integer32,
jnxRedundancyKeepaliveElapsed Integer32,
jnxRedundancyKeepaliveLoss Counter32,
jnxRedundancyChassisId JnxChassisId,
jnxRedundancyChassisDescr DisplayString
}
jnxRedundancyContentsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex in the
jnxContentsTable."
::= { jnxRedundancyEntry 1 }
jnxRedundancyL1Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level one index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxRedundancyEntry 2 }
jnxRedundancyL2Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level two index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxRedundancyEntry 3 }
jnxRedundancyL3Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level three index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxRedundancyEntry 4 }
jnxRedundancyDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name or detailed description of this subject."
::= { jnxRedundancyEntry 5 }
jnxRedundancyConfig OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
master(2), -- election priority set as a master
backup(3), -- election priority set as a backup
disabled(4), -- election disabled
notApplicable(5) -- any among the available can be master
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The election priority of redundancy configuration for
this subject. The value 'notApplicable' means no
specific instance is configured to be master or
backup; whichever component boots up first becomes a
master."
::= { jnxRedundancyEntry 6 }
jnxRedundancyState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
master(2), -- master
backup(3), -- backup
disabled(4) -- disabled
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current running state for this subject."
::= { jnxRedundancyEntry 7 }
jnxRedundancySwitchoverCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of switchover as perceived by
this subject since routing engine is up and running.
The switchover is defined as a change in state of
jnxRedundancyState from master to backup or vice
versa. Its value is reset when the routing engine
is reset or rebooted."
::= { jnxRedundancyEntry 8 }
jnxRedundancySwitchoverTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the jnxRedundancyState
of this subject was last switched over from master
to backup or vice versa. Zero if unknown or never
switched over since the routing engine is up and
running."
::= { jnxRedundancyEntry 9 }
jnxRedundancySwitchoverReason OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- others
neverSwitched(2), -- never switched
userSwitched(3), -- user-initiated switchover
autoSwitched(4) -- automatic switchover
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason of the last switchover for this subject."
::= { jnxRedundancyEntry 10 }
jnxRedundancyKeepaliveHeartbeat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The period of sending keepalive messages between
the master and backup subsystems. It is a system-wide
preset value in seconds used by internal mastership
resolution. Zero if unavailable or inapplicable."
::= { jnxRedundancyEntry 11 }
jnxRedundancyKeepaliveTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout period in seconds, by the keepalive
watchdog timer, before initiating a switch over to
the backup subsystem. Zero if unavailable or
inapplicable."
::= { jnxRedundancyEntry 12 }
jnxRedundancyKeepaliveElapsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elapsed time in seconds by this subject since
receiving the last keepalive message from the other
subsystems. Zero if unavailable or inapplicable."
::= { jnxRedundancyEntry 13 }
jnxRedundancyKeepaliveLoss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of losses on keepalive messages
between the master and backup subsystems as perceived
by this subject since the system is up and running.
Zero if unavailable or inapplicable."
::= { jnxRedundancyEntry 14 }
jnxRedundancyChassisId OBJECT-TYPE
SYNTAX JnxChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the chassis on which the contents of this
row exists."
::= { jnxRedundancyEntry 15 }
jnxRedundancyChassisDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the chassis on which the
contents of this row exists."
::= { jnxRedundancyEntry 16 }
--
-- FRU (Field Replaceable Unit) Status Table
--
-- This table shows the status of the FRUs in the chassis.
--
jnxFruTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of FRU status entries."
::= { jnxBoxAnatomy 15 }
jnxFruEntry OBJECT-TYPE
SYNTAX JnxFruEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the FRU status table."
INDEX { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index }
::= { jnxFruTable 1 }
JnxFruEntry ::= SEQUENCE {
jnxFruContentsIndex Integer32,
jnxFruL1Index Integer32,
jnxFruL2Index Integer32,
jnxFruL3Index Integer32,
jnxFruName DisplayString,
jnxFruType INTEGER,
jnxFruSlot Integer32,
jnxFruState INTEGER,
jnxFruTemp Gauge32,
jnxFruOfflineReason INTEGER,
jnxFruLastPowerOff TimeStamp,
jnxFruLastPowerOn TimeStamp,
jnxFruPowerUpTime TimeInterval,
jnxFruChassisId JnxChassisId,
jnxFruChassisDescr DisplayString,
jnxFruPsdAssignment Integer32
}
jnxFruContentsIndex OBJECT-TYPE
SYNTAX Integer32 (1..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The associated jnxContentsContainerIndex in the
jnxContentsTable."
::= { jnxFruEntry 1 }
jnxFruL1Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level one index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxFruEntry 2 }
jnxFruL2Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level two index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxFruEntry 3 }
jnxFruL3Index OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level three index associated with this
subject. Zero if unavailable or inapplicable."
::= { jnxFruEntry 4 }
jnxFruName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name or detailed description of this subject."
::= { jnxFruEntry 5 }
jnxFruType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- unknown or others
clockGenerator(2), -- CG
flexiblePicConcentrator(3), -- FPC
switchingAndForwardingModule(4), -- SFM
controlBoard(5), -- CBD, SCB
routingEngine(6), -- RE
powerEntryModule(7), -- PEM
frontPanelModule(8), -- FPM
switchInterfaceBoard(9), -- SIB
processorMezzanineBoardForSIB(10), -- SPMB
portInterfaceCard(11), -- PIC
craftInterfacePanel(12), -- CIP
fan(13), -- fan
lineCardChassis(14), -- LCC
forwardingEngineBoard(15), -- FEB
protectedSystemDomain(16) -- PSD
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FRU type for this subject."
::= { jnxFruEntry 6 }
jnxFruSlot OBJECT-TYPE
SYNTAX Integer32 (0..'7fffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot number of this subject. This is equivalent
to jnxFruL1Index in meaning. Zero if unavailable or
inapplicable."
::= { jnxFruEntry 7 }
jnxFruState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
empty(2),
present(3),
ready(4),
announceOnline(5),
online(6),
anounceOffline(7),
offline(8),
diagnostic(9),
standby(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state for this subject."
::= { jnxFruEntry 8 }
jnxFruTemp OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature in Celsius (degrees C) of this
subject. Zero if unavailable or inapplicable."
::= { jnxFruEntry 9 }
jnxFruOfflineReason OBJECT-TYPE
SYNTAX INTEGER {
unknown(1), -- unknown or other
none(2), -- none
error(3), -- error
noPower(4), -- no power
configPowerOff(5), -- configured to power off
configHoldInReset(6), -- configured to hold in reset
cliCommand(7), -- offlined by cli command
buttonPress(8), -- offlined by button press
cliRestart(9), -- restarted by cli command
overtempShutdown(10), -- overtemperature shutdown
masterClockDown(11), -- master clock down
singleSfmModeChange(12), -- single SFM mode change
packetSchedulingModeChange(13), -- packet scheduling mode change
physicalRemoval(14), -- physical removal
unresponsiveRestart(15), -- restarting unresponsive board
sonetClockAbsent(16), -- sonet out clock absent
rddPowerOff(17), -- RDD power off
majorErrors(18), -- major errors
minorErrors(19), -- minor errors
lccHardRestart(20), -- LCC hard restart
lccVersionMismatch(21), -- LCC version mismatch
powerCycle(22), -- power cycle
reconnect(23), -- reconnect
overvoltage(24), -- overvoltage
pfeVersionMismatch(25), -- PFE version mismatch
febRddCfgChange(26), -- FEB redundancy cfg changed
fpcMisconfig(27), -- FPC is misconfigured
fruReconnectFail(28), -- FRU did not reconnect
fruFwddReset(29), -- FWDD reset the fru
fruFebSwitch(30), -- FEB got switched
fruFebOffline(31), -- FEB was offlined
fruInServSoftUpgradeError(32), -- In Service Software Upgrade Error
fruChasdPowerRatingExceed(33), -- Chassis power rating exceeded
fruConfigOffline(34), -- Configured offline
fruServiceRestartRequest(35), -- restarting request from a service
spuResetRequest(36), -- SPU reset request
spuFlowdDown(37), -- SPU flowd down
spuSpi4Down(38), -- SPU SPI4 down
spuWatchdogTimeout(39), -- SPU Watchdog timeout
spuCoreDump(40), -- SPU kernel core dump
fpgaSpi4LinkDown(41), -- FPGA SPI4 link down
i3Spi4LinkDown(42), -- I3 SPI4 link down
cppDisconnect(43), -- CPP disconnect
cpuNotBoot(44), -- CPU not boot
spuCoreDumpComplete(45), -- SPU kernel core dump complete
rstOnSpcSpuFailure(46), -- Rst on SPC SPU failure
softRstOnSpcSpuFailure(47), -- Soft Reset on SPC SPU failure
hwAuthenticationFailure(48), -- HW authentication failure
reconnectFpcFail(49), -- Reconnect FPC fail
fpcAppFailed(50), -- FPC app failed
fpcKernelCrash(51), -- FPC kernel crash
spuFlowdDownNoCore(52), -- SPU flowd down, no core dump
spuFlowdCoreDumpIncomplete(53), -- SPU flowd crash with incomplete core dump
spuFlowdCoreDumpComplete(54), -- SPU flowd crash with complete core dump
spuIdpdDownNoCore(55), -- SPU idpd down, no core dump
spuIdpdCoreDumpIncomplete(56), -- SPU idpd crash with incomplete core dump
spuIdpdCoreDumpComplete(57), -- SPU idpd crash with complete core dump
spuCoreDumpIncomplete(58), -- SPU kernel crash with incomplete core dump
spuIdpdDown(59), -- SPU idpd down
fruPfeReset(60), -- PFE reset
fruReconnectNotReady(61), -- FPC not ready to reconnect
fruSfLinkDown(62), -- FE - Fabric links down
fruFabricDown(63), -- Fabric transitioned from up to down
fruAntiCounterfeitRetry(64), -- FPC offlined due to Anti Counterfeit Retry
fruFPCChassisClusterDisable(65), -- FPC offlined due to Chassis Cluster Disable
spuFipsError(66), -- SPU fips error
fruFPCFabricDownOffline(67), -- FPC offlined due to Fabric down
febCfgChange(68), -- FEB config change
routeLocalizationRoleChange(69), -- Route localization role change
fruFpcUnsupported(70), -- FPC unsupported
psdVersionMismatch(71), -- PSD version mismatch
fruResetThresholdExceeded(72), -- FRU Reset Threshold Exceeded
picBounce(73), -- PIC Bounce
badVoltage(74) -- bad voltage
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offline reason of this subject."
::= { jnxFruEntry 10 }
jnxFruLastPowerOff OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this subject was last
powered off. Zero if unavailable or inapplicable."
::= { jnxFruEntry 11 }
jnxFruLastPowerOn OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this subject was last
powered on. Zero if unavailable or inapplicable."
::= { jnxFruEntry 12 }
jnxFruPowerUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval in 10-millisecond period
that this subject has been up and running
since the last power on time. Zero if
unavailable or inapplicable."
::= { jnxFruEntry 13 }
jnxFruChassisId OBJECT-TYPE
SYNTAX JnxChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the chassis on which the contents of this
row exists."
::= { jnxFruEntry 14 }
jnxFruChassisDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the chassis on which the
contents of this row exists."
::= { jnxFruEntry 15 }
jnxFruPsdAssignment OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSD assignment of this subject. Zero if unavailable or
not applicable."
::= { jnxFruEntry 16 }
--
-- definition of Kernel Memory Used related stuff
--
jnxBoxKernelMemoryUsedPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of kernel memory used
of this subject. 0 if unavailable or
inapplicable."
::= { jnxBoxAnatomy 16 }
--
-- definition of system domain information
--
jnxBoxSystemDomainType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
rootSystemDomain(2),
protectedSystemDomain(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system domain type of this subject, notApplicable will
be returned if this feature is not supported."
::= { jnxBoxAnatomy 17 }
--
-- definition of chassis related traps
--
-- Traps for chassis alarm conditions
jnxPowerSupplyFailure NOTIFICATION-TYPE
OBJECTS { jnxContentsContainerIndex,
jnxContentsL1Index,
jnxContentsL2Index,
jnxContentsL3Index,
jnxContentsDescr,
jnxOperatingState }
STATUS current
DESCRIPTION
"A jnxPowerSupplyFailure trap signifies that
the SNMP entity, acting in an agent role, has
detected that the specified power supply in the
chassis has been in the failure (bad DC output)
condition."
::= { jnxChassisTraps 1 }
jnxFanFailure NOTIFICATION-TYPE
OBJECTS { jnxContentsContainerIndex,
jnxContentsL1Index,
jnxContentsL2Index,
jnxContentsL3Index,
jnxContentsDescr,
jnxOperatingState }
STATUS current
DESCRIPTION
"A jnxFanFailure trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified cooling fan or impeller in
the chassis has been in the failure (not spinning)
condition."
::= { jnxChassisTraps 2 }
jnxOverTemperature NOTIFICATION-TYPE
OBJECTS { jnxContentsContainerIndex,
jnxContentsL1Index,
jnxContentsL2Index,
jnxContentsL3Index,
jnxContentsDescr,
jnxOperatingTemp }
STATUS current
DESCRIPTION
"A jnxOverTemperature trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified hardware component
in the chassis has experienced over temperature
condition."
::= { jnxChassisTraps 3 }
jnxRedundancySwitchover NOTIFICATION-TYPE
OBJECTS { jnxRedundancyContentsIndex,
jnxRedundancyL1Index,
jnxRedundancyL2Index,
jnxRedundancyL3Index,
jnxRedundancyDescr,
jnxRedundancyConfig,
jnxRedundancyState,
jnxRedundancySwitchoverCount,
jnxRedundancySwitchoverTime,
jnxRedundancySwitchoverReason }
STATUS current
DESCRIPTION
"A jnxRedundancySwitchover trap signifies that
the SNMP entity, acting in an agent role, has
detected that the specified hardware component
in the chassis has experienced a redundancy
switchover event defined as a change in state
of jnxRedundancyState from master to backup or
vice versa."
::= { jnxChassisTraps 4 }
jnxFruRemoval NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxFruRemoval trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified FRU (Field Replaceable Unit)
has been removed from the chassis."
::= { jnxChassisTraps 5 }
jnxFruInsertion NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxFruInsertion trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has been
inserted into the chassis."
::= { jnxChassisTraps 6 }
jnxFruPowerOff NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot,
jnxFruOfflineReason,
jnxFruLastPowerOff,
jnxFruLastPowerOn }
STATUS current
DESCRIPTION
"A jnxFruPowerOff trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified FRU (Field Replaceable Unit)
has been powered off in the chassis."
::= { jnxChassisTraps 7 }
jnxFruPowerOn NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot,
jnxFruOfflineReason,
jnxFruLastPowerOff,
jnxFruLastPowerOn }
STATUS current
DESCRIPTION
"A jnxFruPowerOn trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has been
powered on in the chassis."
::= { jnxChassisTraps 8 }
jnxFruFailed NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"This indicates the specified FRU (Field Replaceable Unit)
has failed in the chassis. Most probably this is due toi
some hard error such as fru is not powering up or not
able to load ukernel. In these cases, fru is replaced."
::= { jnxChassisTraps 9 }
jnxFruOffline NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot,
jnxFruOfflineReason,
jnxFruLastPowerOff,
jnxFruLastPowerOn }
STATUS current
DESCRIPTION
"A jnxFruOffline trap signifies that the SNMP
entity, acting in an agent role, has detected
that the specified FRU (Field Replaceable Unit)
has gone offline in the chassis."
::= { jnxChassisTraps 10 }
jnxFruOnline NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxFruOnline trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has
gone online in the chassis."
::= { jnxChassisTraps 11 }
jnxFruCheck NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxFruCheck trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has
encountered some operational errors and gone into
check state in the chassis."
::= { jnxChassisTraps 12 }
jnxFEBSwitchover NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxFEBSwitchover trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FEB (Forwarding Engine Board) has
switched over."
::= { jnxChassisTraps 13 }
jnxHardDiskFailed NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxHardDiskFailed trap signifies that the SNMP
entity, acting in an agent role, has detected that
the Disk in the specified Routing Engine has
encountered some operational errors and gone into
failed state in the chassis."
::= { jnxChassisTraps 14 }
jnxHardDiskMissing NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A DiskMissing trap signifies that the SNMP
entity, acting in an agent role, has detected that
hard disk in the specified outing Engine is missing
from boot device list."
::= { jnxChassisTraps 15 }
jnxBootFromBackup NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxBootFromBackup trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified routing-engine/member has booted from
the back up root partition"
::= { jnxChassisTraps 16 }
-- Traps for chassis alarm cleared conditions
jnxPowerSupplyOK NOTIFICATION-TYPE
OBJECTS { jnxContentsContainerIndex,
jnxContentsL1Index,
jnxContentsL2Index,
jnxContentsL3Index,
jnxContentsDescr,
jnxOperatingState }
STATUS current
DESCRIPTION
"A jnxPowerSupplyOK trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified power supply in the
chassis has recovered from the failure (bad DC output)
condition."
::= { jnxChassisOKTraps 1 }
jnxFanOK NOTIFICATION-TYPE
OBJECTS { jnxContentsContainerIndex,
jnxContentsL1Index,
jnxContentsL2Index,
jnxContentsL3Index,
jnxContentsDescr,
jnxOperatingState }
STATUS current
DESCRIPTION
"A jnxFanOK trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified cooling fan or impeller in the chassis
has recovered from the failure (not spinning) condition."
::= { jnxChassisOKTraps 2 }
jnxTemperatureOK NOTIFICATION-TYPE
OBJECTS { jnxContentsContainerIndex,
jnxContentsL1Index,
jnxContentsL2Index,
jnxContentsL3Index,
jnxContentsDescr,
jnxOperatingTemp }
STATUS current
DESCRIPTION
"A jnxTemperatureOK trap signifies that the
SNMP entity, acting in an agent role, has
detected that the specified hardware component
in the chassis has recovered from over temperature
condition."
::= { jnxChassisOKTraps 3 }
jnxFruOK NOTIFICATION-TYPE
OBJECTS { jnxFruContentsIndex,
jnxFruL1Index,
jnxFruL2Index,
jnxFruL3Index,
jnxFruName,
jnxFruType,
jnxFruSlot }
STATUS current
DESCRIPTION
"A jnxFruOK trap signifies that the SNMP
entity, acting in an agent role, has detected that
the specified FRU (Field Replaceable Unit) has
recovered from previous operational errors and it
is in ok state in the chassis."
::= { jnxChassisOKTraps 4 }
END