mibs/junos/JUNIPER-PFE-MIB
--
-- Juniper Enterprise Specific MIB: PFE MIB
--
-- Copyright (c) 2006-2012, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-PFE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Counter64, Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString
FROM SNMPv2-TC
jnxPfeMibRoot
FROM JUNIPER-SMI;
jnxPfeMib MODULE-IDENTITY
LAST-UPDATED "201605310000Z" -- Tue May 31 00:00:00 2016 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"The MIB provides PFE specific data."
REVISION "201411140000Z"
DESCRIPTION
"Added jnxPfeMemoryTrapVars and jnxPfeMemoryNotifications."
REVISION "201403120000Z"
DESCRIPTION
"Added new Table jnxPfeNotifyGlParAccSec which counts
notifications for the packets parsed/processed by
access-security."
REVISION "201109090000Z"
DESCRIPTION
"Added new Table jnxPfeMemoryErrorsTable which gives parity and
ecc errors.
Added new Trap pfeMemoryErrors"
REVISION "201002070000Z"
DESCRIPTION
"Added new notification types."
--REVISION "201001070000Z"
--DESCRIPTION
-- "Added new notification types."
--REVISION "200607240000Z"
--DESCRIPTION
-- "Initial revision."
REVISION "201605310000Z" -- 31-May-16
DESCRIPTION
"Corrected type in sequence and actual"
::= { jnxPfeMibRoot 1 }
JnxPfeMemoryTypeEnum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"PFE memory type, nh (1), fw (2), encap (3)"
SYNTAX INTEGER { nh(1),
fw(2),
encap(3)}
--
-- This branch contains all PFE Notification statistics data.
--
jnxPfeNotification OBJECT IDENTIFIER ::= { jnxPfeMib 1 }
--
-- This table provide global PFE notification stats for each PFE slot,
-- exposing the data provided by the 'show pfe statistics notification'
-- cli command.
--
jnxPfeNotifyGlTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxPfeNotifyGlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides global PFE notification statistics."
::= { jnxPfeNotification 1 }
jnxPfeNotifyGlEntry OBJECT-TYPE
SYNTAX JnxPfeNotifyGlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { jnxPfeNotifyGlSlot }
::= { jnxPfeNotifyGlTable 1 }
JnxPfeNotifyGlEntry ::=
SEQUENCE {
jnxPfeNotifyGlSlot Integer32,
jnxPfeNotifyGlParsed Counter32,
jnxPfeNotifyGlAged Counter32,
jnxPfeNotifyGlCorrupt Counter32,
jnxPfeNotifyGlIllegal Counter32,
jnxPfeNotifyGlSample Counter32,
jnxPfeNotifyGlGiants Counter32,
jnxPfeNotifyGlTtlExceeded Counter32,
jnxPfeNotifyGlTtlExcErrors Counter32,
jnxPfeNotifyGlSvcOptAsp Counter32,
jnxPfeNotifyGlSvcOptRe Counter32,
jnxPfeNotifyGlPostSvcOptOut Counter32,
jnxPfeNotifyGlOptTtlExp Counter32,
jnxPfeNotifyGlDiscSample Counter32,
jnxPfeNotifyGlRateLimited Counter32,
jnxPfeNotifyGlPktGetFails Counter32,
jnxPfeNotifyGlDmaFails Counter32,
jnxPfeNotifyGlDmaTotals Counter32,
jnxPfeNotifyGlUnknowns Counter32,
jnxPfeNotifyGlParAccSec Counter32
}
jnxPfeNotifyGlSlot OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PFE slot number for this set of global PFE notification
statistics."
::= { jnxPfeNotifyGlEntry 1 }
jnxPfeNotifyGlParsed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications reported by the routing chip."
::= { jnxPfeNotifyGlEntry 2 }
jnxPfeNotifyGlAged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications that are dropped due to the fact
that the they have been in the system for too long and
hence not valid anymore."
::= { jnxPfeNotifyGlEntry 3 }
jnxPfeNotifyGlCorrupt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications dropped due to the fact that they
have an invalid notification result format. This counter
is valid for Internet Processor-I and Internet Processor-II
only."
::= { jnxPfeNotifyGlEntry 4 }
jnxPfeNotifyGlIllegal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications dropped due to the fact that they
have an illegal notification type."
::= { jnxPfeNotifyGlEntry 5 }
jnxPfeNotifyGlSample OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of sample notifications reported by the routing chip."
::= { jnxPfeNotifyGlEntry 6 }
jnxPfeNotifyGlGiants OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications dropped that are larger than the
supported DMA size."
::= { jnxPfeNotifyGlEntry 7 }
jnxPfeNotifyGlTtlExceeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of options/TTL-expired notifications that need to be
sent to service interfaces as transit packets. This counter
is valid for Internet Processor-I and Internet Processor-II
only."
::= { jnxPfeNotifyGlEntry 8 }
jnxPfeNotifyGlTtlExcErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of options/TTL-expired packet notifications that could
not be sent as transit packets because the output interface
could not be determined. This counter is valid for Internet
Processor-I and Internet Processor-II only."
::= { jnxPfeNotifyGlEntry 9 }
jnxPfeNotifyGlSvcOptAsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of IP options packets that are sent out to a Services
PIC."
::= { jnxPfeNotifyGlEntry 10 }
jnxPfeNotifyGlSvcOptRe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of IP options packets that are sent out to the Routing
Engine."
::= { jnxPfeNotifyGlEntry 11 }
jnxPfeNotifyGlPostSvcOptOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications that were re-injected by the services
PIC after it had processed the associated packets. These
notifications now need to be forwarded out to their actual
destination. This counter is valid for Internet Processor-I
and Internet Processor-II only."
::= { jnxPfeNotifyGlEntry 12 }
jnxPfeNotifyGlOptTtlExp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of TTL-expired transit packets."
::= { jnxPfeNotifyGlEntry 13 }
jnxPfeNotifyGlDiscSample OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of sample notifications that are dropped as they refer
to discarded packets in PFE."
::= { jnxPfeNotifyGlEntry 14 }
jnxPfeNotifyGlRateLimited OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications ignored because of PFE software
throttling."
::= { jnxPfeNotifyGlEntry 15 }
jnxPfeNotifyGlPktGetFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications where we could not allocate memory
for DMA."
::= { jnxPfeNotifyGlEntry 16 }
jnxPfeNotifyGlDmaFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications where the DMA of associated packets
failed for miscellaneous reasons. Valid for T-series Internet
Processor only."
::= { jnxPfeNotifyGlEntry 17 }
jnxPfeNotifyGlDmaTotals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications for which the packet DMA completed.
Valid for T-series Internet Processor only."
::= { jnxPfeNotifyGlEntry 18 }
jnxPfeNotifyGlUnknowns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications that could not be resolved to a known
next hop destination. Valid for T-series Internet Processor
only."
::= { jnxPfeNotifyGlEntry 19 }
jnxPfeNotifyGlParAccSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications for the packets parsed/processed by
access-security."
::= { jnxPfeNotifyGlEntry 20 }
--
-- This table provides Type specific PFE notification stats for each PFE
-- slot, exposing the data provided by the 'show pfe statistics
-- notification' cli command.
--
jnxPfeNotifyTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxPfeNotifyTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This provides type-specific PFE notification stats"
::= { jnxPfeNotification 2 }
jnxPfeNotifyTypeEntry OBJECT-TYPE
SYNTAX JnxPfeNotifyTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { jnxPfeNotifyGlSlot, jnxPfeNotifyTypeId }
::= { jnxPfeNotifyTypeTable 1 }
JnxPfeNotifyTypeEntry ::=
SEQUENCE {
jnxPfeNotifyTypeId INTEGER,
jnxPfeNotifyTypeDescr DisplayString,
jnxPfeNotifyTypeParsed Counter32,
jnxPfeNotifyTypeInput Counter32,
jnxPfeNotifyTypeFailed Counter32,
jnxPfeNotifyTypeIgnored Counter32
}
jnxPfeNotifyTypeId OBJECT-TYPE
SYNTAX INTEGER {
illegal (1),
unclassified (2),
option (3),
nextHop (4),
discard (5),
sample (6),
redirect (7),
dontFragment (8),
cfdf (9),
poison (10),
unknown (11),
specialMemPkt (12),
autoConfig (13),
reject (14)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This identifies the PFE notification type for this row's stats.
Below is a description of each notification type:
1. illegal Packets with invalid notification type.
2. unclassified Packets that did not have a key lookup
performed on them.
3. option Packets which have L3 options present.
4. nextHop Packets that are destined to the host.
5. discard Used when a discarded packet is sent to the
route processor.
6. sample Unused.
7. redirect This is used when a packet is being sent out
on the interface it came in on.
8. dontFragment This is used that a packet needs to be
fragmented but the DF (don't fragment) bit
is set.
9. cfdf When an MTU exceeded indication is
triggered by the CF chip and the packet has
DF (don't fragment) set.
10. poison Packets that resolved to a poisoned next
hop index.
11. unknown Packets of unknown notification type.
12. specialMemPkt Packets with special memory pkt type notification used in diagnostics.
13. autoconfig Packets with autoconfig PFE notification type used for dynamic VLANs.
14. reject Packets of reject PFE notification type."
::= { jnxPfeNotifyTypeEntry 1 }
jnxPfeNotifyTypeDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the Pfe Notification type for this entry."
::= { jnxPfeNotifyTypeEntry 2 }
jnxPfeNotifyTypeParsed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of successful parsing of notifications."
::= { jnxPfeNotifyTypeEntry 3 }
jnxPfeNotifyTypeInput OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications whose associated packets were DMA'ed
into route processor memory."
::= { jnxPfeNotifyTypeEntry 4 }
jnxPfeNotifyTypeFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of failures in parsing the notifications."
::= { jnxPfeNotifyTypeEntry 5 }
jnxPfeNotifyTypeIgnored OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of notifications where the notification type in the
message does not match any of the valid types."
::= { jnxPfeNotifyTypeEntry 6 }
--
-- This table provides error counters for each PFE
--
jnxPfeMemoryErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxPfeMemoryErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This provides PFE memory errors"
::= { jnxPfeNotification 3 }
jnxPfeMemoryErrorsEntry OBJECT-TYPE
SYNTAX JnxPfeMemoryErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { jnxPfeFpcSlot, jnxPfeSlot }
::= { jnxPfeMemoryErrorsTable 1 }
JnxPfeMemoryErrorsEntry ::=
SEQUENCE {
jnxPfeFpcSlot Integer32,
jnxPfeSlot Integer32,
jnxPfeParityErrors Counter64,
jnxPfeEccErrors Counter64
}
jnxPfeFpcSlot OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The FPC slot number for this set of PFE notification"
::= { jnxPfeMemoryErrorsEntry 1 }
jnxPfeSlot OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pfe slot number for this set of errors"
::= { jnxPfeMemoryErrorsEntry 2 }
jnxPfeParityErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parity error count"
::= { jnxPfeMemoryErrorsEntry 3 }
jnxPfeEccErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ECC error count"
::= { jnxPfeMemoryErrorsEntry 4 }
pfeMemoryErrorsNotificationPrefix OBJECT IDENTIFIER ::= { jnxPfeNotification 0 }
pfeMemoryErrors NOTIFICATION-TYPE
OBJECTS {
jnxPfeParityErrors,
jnxPfeEccErrors
}
STATUS current
DESCRIPTION
"A pfeMemoryErrors notification is sent when the value
of jnxPfeParityErrors or jnxPfeEccErrors increases."
::= { pfeMemoryErrorsNotificationPrefix 1 }
--
-- This contains all PFE Memory statistics data.
--
jnxPfeMemory OBJECT IDENTIFIER ::= { jnxPfeMib 2 }
--
-- This table provide global PFE Memory ASIC and Ukern stats for each PFE slot,
--
jnxPfeMemoryUkernTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxPfeMemoryUkernEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides global PFE ukern memory statistics for
specified slot."
::= { jnxPfeMemory 1 }
jnxPfeMemoryUkernEntry OBJECT-TYPE
SYNTAX JnxPfeMemoryUkernEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry represent ukern memory percentage free."
INDEX { jnxPfeGlSlot }
::= { jnxPfeMemoryUkernTable 1 }
JnxPfeMemoryUkernEntry ::=
SEQUENCE {
jnxPfeGlSlot Unsigned32,
jnxPfeMemoryUkernFreePercent Unsigned32
}
jnxPfeMemoryUkernFreePercent OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percent PFE ukern memory free within ukern heap."
::= { jnxPfeMemoryUkernEntry 2 }
--
-- This table provide global PFE NH (Trio) /JTREE Memory(I-Chip) and FW /
-- Filter and Encap (I-chip Iwo SRAM) memory stats for each PFE slot,
--
jnxPfeMemoryForwardingTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxPfeMemoryForwardingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides PFE ASIC memory - NH/JTREE or FW/Filter or Encap
memory utilization statistics."
::= { jnxPfeMemory 2 }
jnxPfeMemoryForwardingEntry OBJECT-TYPE
SYNTAX JnxPfeMemoryForwardingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry represent ASIC memory free percent of a specific type
in specified pfe instance"
INDEX { jnxPfeGlSlot, jnxPfeMemoryForwardingChipSlot, jnxPfeMemoryType }
::= { jnxPfeMemoryForwardingTable 1 }
JnxPfeMemoryForwardingEntry ::=
SEQUENCE {
jnxPfeMemoryForwardingChipSlot Unsigned32,
jnxPfeMemoryType JnxPfeMemoryTypeEnum,
jnxPfeMemoryForwardingPercentFree Unsigned32
}
jnxPfeMemoryForwardingChipSlot OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ASIC instance number or pfe complex instance number."
::= { jnxPfeMemoryForwardingEntry 1 }
jnxPfeMemoryType OBJECT-TYPE
SYNTAX JnxPfeMemoryTypeEnum
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PFE ASIC memory type, nh = 1, fw = 2, encap = 3."
::= { jnxPfeMemoryForwardingEntry 2 }
jnxPfeMemoryForwardingPercentFree OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage ASIC memory free for a specific memory type. For Trio based linecards Encap memory is not available.Hence no value is returned"
::= { jnxPfeMemoryForwardingEntry 3 }
--
-- PFE Memory Notification Variables/Objects
--
jnxPfeMemoryTrapVars OBJECT-IDENTITY
STATUS current
DESCRIPTION
"PFE notification object definitions."
::= { jnxPfeMemory 3 }
jnxPfeGlSlot OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Global slot number for line card resource monitoring."
::= { jnxPfeMemoryTrapVars 1 }
jnxPfeInstanceNumber OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"PFE instance number in pfe complex."
::= { jnxPfeMemoryTrapVars 2 }
jnxPfeMemoryThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Configured high memory utilization threshold."
::= { jnxPfeMemoryTrapVars 3 }
jnxPfeMemoryNotificationsPrefix OBJECT IDENTIFIER ::= { jnxPfeMemory 4 }
jnxPfeMemoryNotifications OBJECT IDENTIFIER ::= { jnxPfeMemoryNotificationsPrefix 0 }
jnxPfeHeapMemoryThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the Heap Memory utilization has crossed the
configured watermark."
::= { jnxPfeMemoryNotifications 1 }
jnxPfeHeapMemoryThresholdAbated NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the Heap Memory utilization has fallen below the
configured watermark."
::= { jnxPfeMemoryNotifications 2 }
jnxPfeNextHopMemoryThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeInstanceNumber,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the Next Hop Memory utilization has crossed the
configured watermark."
::= { jnxPfeMemoryNotifications 3 }
jnxPfeNextHopMemoryThresholdAbated NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeInstanceNumber,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the Next Hop Memory utilization has fallen below the
configured watermark."
::= { jnxPfeMemoryNotifications 4 }
jnxPfeFilterMemoryThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeInstanceNumber,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the Filter Memory utilization has crossed the
configured watermark."
::= { jnxPfeMemoryNotifications 5 }
jnxPfeFilterMemoryThresholdAbated NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeInstanceNumber,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the Filter Memory utilization has fallen below the
configured watermark."
::= { jnxPfeMemoryNotifications 6 }
jnxPfeEncapMemoryThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeInstanceNumber,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the ENCAP Memory utilization has crossed the
configured watermark."
::= { jnxPfeMemoryNotifications 7 }
jnxPfeEncapMemoryThresholdAbated NOTIFICATION-TYPE
OBJECTS {
jnxPfeGlSlot,
jnxPfeInstanceNumber,
jnxPfeMemoryThreshold }
STATUS current
DESCRIPTION
"Indicates that the ENCAP Memory utilization has fallen below the
configured watermark."
::= { jnxPfeMemoryNotifications 8 }
END