mibs/junos/JUNIPER-SUBSCRIBER-MIB
-- *****************************************************************************
-- JUNIPER-SUBSCRIBER-MIB
--
-- Juniper Networks Enterprise MIB
-- Subscriber MIB
--
-- Copyright (c) 2010-2013, Juniper Networks, Inc.
-- All rights reserved.
-- *****************************************************************************
JUNIPER-SUBSCRIBER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, MacAddress
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
CounterBasedGauge64 -- RFC 2856
FROM HCNUM-TC
jnxSubscriberMibRoot
FROM JUNIPER-SMI;
jnxSubscriberMIB MODULE-IDENTITY
LAST-UPDATED "201602160000Z" -- 16-Feb-16
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"The Subscriber MIB for the Juniper Networks enterprise."
-- Revision History
REVISION "201005110000Z" -- 11-May-10
DESCRIPTION
"Initial version of jnxSubscriberMIB module."
REVISION "201205020000Z" -- 02-May-12
DESCRIPTION
"Updated related to subscriber accounting session id."
REVISION "201312130000Z" -- 20-Dec-13
DESCRIPTION
"Added jnxSubscriberAccountingTable MIB."
REVISION "201411030000Z" -- 03-Nov-14
DESCRIPTION
"Added jnxSubscriberPicCountTable and jnxSubscriberSlotCountTable."
REVISION "201602160000Z" -- 16-Feb-2016
DESCRIPTION
"Added jnxSubscriberUnderlyingInterface and
jnxSubscriberPhysicalInterface objects."
::= { jnxSubscriberMibRoot 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
JnxSubscriberState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The set of possible AAA subscriber states, expressed as a bit map:
init INIT state only
configured CONFIGURED state only
active ACTIVE state only
terminated TERMINATED state only
terminating TERMINATING state only
unknown Unknown state "
SYNTAX INTEGER {
init(0),
configured(1),
active(2),
terminating(3),
terminated(4),
unknown(5) }
JnxSubscriberClientType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The set of possible AAA subscriber client types:
none None of the following
dhcp DHCP clients only
l2tp L2TP clients only
ppp PPP clients only
pppoe PPPoE clients only
vlan VLAN clients only
generic Generic clients only
mobileIp Mobile Ip clients only
vplsPw VPLS pseudowires only
static Static clients only
mlppp MLPPP clients only
xauth XAUTH clients only
fwauth FWAUTH clients only
dot1x DOT1X clients only
essm ESSM clients only
l2ald L2ALD clients only
gre GRE clients only
vlanOob Out-of-band VLAN clients only
hagTunnel Hag Tunnel clients only
hagBundle Hag Bundle clients only
fwa FWA clients only "
SYNTAX BITS {
none(0),
dhcp(1),
vlan(2),
generic(3),
mobileIp(4),
vplsPw(5),
ppp(6),
ppppoe(7),
l2tp(8),
static(9),
mlppp(10),
xauth(11),
fwauth(12),
dot1x(13),
essm(14),
l2ald(15),
gre(16),
vlanOob(17),
hagTunnel(18),
hagBundle(19),
fwa(20) }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed object groups
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
jnxSubscriberObjects OBJECT IDENTIFIER ::= {jnxSubscriberMIB 1}
jnxSubscriberGeneral OBJECT IDENTIFIER ::= {jnxSubscriberObjects 1}
jnxSubscriberLogicalSystemObjects OBJECT IDENTIFIER ::= {jnxSubscriberObjects 2}
jnxSubscriberRoutingInstanceObjects OBJECT IDENTIFIER ::= {jnxSubscriberObjects 3}
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects for Subscriber functions
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
jnxSubscriberTotalCount OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of subscribers."
::= { jnxSubscriberGeneral 1 }
jnxSubscriberActiveCount OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active subscribers."
::= { jnxSubscriberGeneral 2 }
jnxSubscriberTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entries in this table represent subscribers."
::= { jnxSubscriberGeneral 3 }
jnxSubscriberInterfaceHardwareIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberInterfaceHardwareIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entries in this table represent subscribers Interface Hardware Index."
::= { jnxSubscriberGeneral 4 }
jnxSubscriberPortCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberPortCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The entries in this table represent each port.
Each entry contains the port name and the number
of active subscribers present on that port."
::= { jnxSubscriberGeneral 5 }
jnxSubscriberAccountingTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberAccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entries in this table represent subscribers with accounting."
::= { jnxSubscriberGeneral 6 }
jnxSubscriberAccountingTotalCount OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of subscribers with accounting."
::= { jnxSubscriberGeneral 7 }
jnxSubscriberPicCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberPicCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The entries in this table represent each PIC.
Each entry contains the PIC name and the number
of active subscribers present on that PIC."
::= { jnxSubscriberGeneral 8 }
jnxSubscriberSlotCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberSlotCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The entries in this table represent each slot.
Each entry contains the slot name and the number
of active subscribers present on that slot."
::= { jnxSubscriberGeneral 9 }
jnxSubscriberInterfaceHardwareIndexEntry OBJECT-TYPE
SYNTAX JnxSubscriberInterfaceHardwareIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of subscribers."
INDEX { jnxSubscriberInterfaceHardwareIndexHandleHiWord, jnxSubscriberInterfaceHardwareIndexHandleLoWord }
::= { jnxSubscriberInterfaceHardwareIndexTable 1 }
JnxSubscriberInterfaceHardwareIndexEntry ::= SEQUENCE {
jnxSubscriberInterfaceHardwareIndexHandleHiWord Unsigned32,
jnxSubscriberInterfaceHardwareIndexHandleLoWord Unsigned32,
jnxSubscriberInterfaceHardwareIndex Unsigned32 }
jnxSubscriberInterfaceHardwareIndexHandleHiWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the most significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberInterfaceHardwareIndexEntry 1 }
jnxSubscriberInterfaceHardwareIndexHandleLoWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the least significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberInterfaceHardwareIndexEntry 2}
jnxSubscriberInterfaceHardwareIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber interface hardware index."
::= { jnxSubscriberInterfaceHardwareIndexEntry 3}
jnxSubscriberEntry OBJECT-TYPE
SYNTAX JnxSubscriberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of subscribers."
INDEX { jnxSubscriberHandleHiWord, jnxSubscriberHandleLoWord }
::= { jnxSubscriberTable 1 }
JnxSubscriberEntry ::= SEQUENCE {
jnxSubscriberHandleHiWord Unsigned32,
jnxSubscriberHandleLoWord Unsigned32,
jnxSubscriberUserName DisplayString,
jnxSubscriberClientType JnxSubscriberClientType,
jnxSubscriberIpAddress IpAddress,
jnxSubscriberIpAddressMask IpAddress,
jnxSubscriberLogicalSystem OCTET STRING,
jnxSubscriberRoutingInstance OCTET STRING,
jnxSubscriberInterface DisplayString,
jnxSubscriberInterfaceType INTEGER,
jnxSubscriberMacAddress MacAddress,
jnxSubscriberState JnxSubscriberState,
jnxSubscriberLoginTime DisplayString,
jnxSubscriberAcctSessionId DisplayString,
jnxSubscriberUnderlyingInterface DisplayString,
jnxSubscriberPhysicalInterface DisplayString }
jnxSubscriberHandleHiWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the most significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberEntry 1 }
jnxSubscriberHandleLoWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the least significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberEntry 2}
jnxSubscriberUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The userName associated with this subscriber."
::= { jnxSubscriberEntry 3 }
jnxSubscriberClientType OBJECT-TYPE
SYNTAX JnxSubscriberClientType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client type for this subscriber."
::= { jnxSubscriberEntry 4 }
jnxSubscriberIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client IP Address assigned to this subscriber."
::= { jnxSubscriberEntry 5 }
jnxSubscriberIpAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client IP Address Mask assigned to this subscriber."
::= { jnxSubscriberEntry 6 }
jnxSubscriberLogicalSystem OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical system associated with this subscriber."
::= { jnxSubscriberEntry 7 }
jnxSubscriberRoutingInstance OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing instance associated with this subscriber."
::= { jnxSubscriberEntry 8 }
jnxSubscriberInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name of the interface associated with this subscriber."
::= { jnxSubscriberEntry 9 }
jnxSubscriberInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
static(1),
dynamic(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the interface associated with this subscriber."
::= { jnxSubscriberEntry 10 }
jnxSubscriberMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the interface associated with this subscriber."
::= { jnxSubscriberEntry 11 }
jnxSubscriberState OBJECT-TYPE
SYNTAX JnxSubscriberState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this subscriber."
::= { jnxSubscriberEntry 12 }
jnxSubscriberLoginTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time this subscriber logged in to the server."
::= { jnxSubscriberEntry 13 }
jnxSubscriberAcctSessionId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accounting session id associated with this subscriber."
::= { jnxSubscriberEntry 14 }
jnxSubscriberUnderlyingInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The underlying interface associated with this subscriber interface."
::= { jnxSubscriberEntry 15 }
jnxSubscriberPhysicalInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical interface associated with this subscriber interface."
::= { jnxSubscriberEntry 16 }
jnxSubscriberPortCountEntry OBJECT-TYPE
SYNTAX JnxSubscriberPortCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of Port containing the port name
and the number of active subscribers on that port"
INDEX { jnxSubscriberPort }
::= { jnxSubscriberPortCountTable 1 }
JnxSubscriberPortCountEntry ::= SEQUENCE {
jnxSubscriberPort DisplayString,
jnxSubscriberPortTunneledCounter CounterBasedGauge64,
jnxSubscriberPortTerminatedCounter CounterBasedGauge64,
jnxSubscriberPortL2CrossConnectCounter CounterBasedGauge64 }
jnxSubscriberPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the port in string"
::= { jnxSubscriberPortCountEntry 1 }
jnxSubscriberPortTunneledCounter OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active Tunneled subscribers present on the port"
::= { jnxSubscriberPortCountEntry 2 }
jnxSubscriberPortTerminatedCounter OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active Tunneled subscribers present on the port"
::= { jnxSubscriberPortCountEntry 3 }
jnxSubscriberPortL2CrossConnectCounter OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Layer-2 cross-connected subscribers present on the port"
::= { jnxSubscriberPortCountEntry 4 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Subscriber information by logical system
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
jnxSubscriberLogicalSystemTotalCount OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total subscribers on the logical system."
::= { jnxSubscriberLogicalSystemObjects 1 }
jnxSubscriberLogicalSystemActiveCount OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active subscribers on the logical system."
::= { jnxSubscriberLogicalSystemObjects 2 }
jnxSubscriberLogicalSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberLogicalSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entries in this table sort subscribers within the logical system.
The logical system name must be provided in the SNMP query. The
logical system will be identified by either the context field in V3
requests, or it will be encoded in the community string in V1 or
V2c requests.
User can query for logical-system/routing-instance specific data by
prefixing the community string with
<logical-system>/<routing-instance>@, where '@' acts as a separator
between community name and routing-instance name.
If no logical system is specified, this table shows data for the
default logical system. The name of the routing instance is ignored
for this table."
::= { jnxSubscriberLogicalSystemObjects 3 }
jnxSubscriberLogicalSystemEntry OBJECT-TYPE
SYNTAX JnxSubscriberLogicalSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of subscribers within the logical system."
INDEX { jnxSubscriberLogicalSystemHandleHiWord, jnxSubscriberLogicalSystemHandleLoWord }
::= { jnxSubscriberLogicalSystemTable 1 }
JnxSubscriberLogicalSystemEntry ::= SEQUENCE {
jnxSubscriberLogicalSystemHandleHiWord Unsigned32,
jnxSubscriberLogicalSystemHandleLoWord Unsigned32,
jnxSubscriberLogicalSystemState JnxSubscriberState }
jnxSubscriberLogicalSystemHandleHiWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the most significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberLogicalSystemEntry 1 }
jnxSubscriberLogicalSystemHandleLoWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the least significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberLogicalSystemEntry 2 }
jnxSubscriberLogicalSystemState OBJECT-TYPE
SYNTAX JnxSubscriberState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this subscriber."
::= { jnxSubscriberLogicalSystemEntry 3 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Subscriber information by routing instance
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
jnxSubscriberRoutingInstanceTotalCount OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total subscribers on the routing instance."
::= { jnxSubscriberRoutingInstanceObjects 1 }
jnxSubscriberRoutingInstanceActiveCount OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active subscribers on the routing instance."
::= { jnxSubscriberRoutingInstanceObjects 2 }
jnxSubscriberRoutingInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxSubscriberRoutingInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entries in this table sort subscribers within routing instance.
The routing instance name must be provided in the SNMP query. The
routing instance will be identified by either the context field in V3
requests, or it will be encoded in the community string in V1 or
V2c requests.
User can query for logical-system/routing-instance specific data by
prefixing the community string with
<logical-system>/<routing-instance>@, where '@' acts as a separator
between community name and routing-instance name.
If no routing instance is specified, this table shows data for the
default routing instance. The name of the logical system is ignored
for this table."
::= { jnxSubscriberRoutingInstanceObjects 3 }
jnxSubscriberRoutingInstanceEntry OBJECT-TYPE
SYNTAX JnxSubscriberRoutingInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of subscribers within routing instance."
INDEX { jnxSubscriberRoutingInstanceHandleHiWord, jnxSubscriberRoutingInstanceHandleLoWord }
::= { jnxSubscriberRoutingInstanceTable 1 }
JnxSubscriberRoutingInstanceEntry ::= SEQUENCE {
jnxSubscriberRoutingInstanceHandleHiWord Unsigned32,
jnxSubscriberRoutingInstanceHandleLoWord Unsigned32,
jnxSubscriberRoutingInstanceState JnxSubscriberState }
jnxSubscriberRoutingInstanceHandleHiWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the most significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberRoutingInstanceEntry 1 }
jnxSubscriberRoutingInstanceHandleLoWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the least significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberRoutingInstanceEntry 2 }
jnxSubscriberRoutingInstanceState OBJECT-TYPE
SYNTAX JnxSubscriberState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this subscriber."
::= { jnxSubscriberRoutingInstanceEntry 3 }
jnxSubscriberAccountingEntry OBJECT-TYPE
SYNTAX JnxSubscriberAccountingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of subscribers with Accounting."
INDEX { jnxSubscriberAccountingHandleHiWord, jnxSubscriberAccountingHandleLoWord }
::= { jnxSubscriberAccountingTable 1 }
JnxSubscriberAccountingEntry ::= SEQUENCE {
jnxSubscriberAccountingHandleHiWord Unsigned32,
jnxSubscriberAccountingHandleLoWord Unsigned32,
jnxSubscriberAccountingUserName DisplayString,
jnxSubscriberAccountingClientType JnxSubscriberClientType,
jnxSubscriberAccountingIpAddress IpAddress,
jnxSubscriberAccountingIpAddressMask IpAddress,
jnxSubscriberAccountingLogicalSystem OCTET STRING,
jnxSubscriberAccountingRoutingInstance OCTET STRING,
jnxSubscriberAccountingInterface DisplayString,
jnxSubscriberAccountingInterfaceType INTEGER,
jnxSubscriberAccountingMacAddress MacAddress,
jnxSubscriberAccountingState JnxSubscriberState,
jnxSubscriberAccountingLoginTime DisplayString,
jnxSubscriberAccountingAcctSessionId DisplayString }
jnxSubscriberAccountingHandleHiWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the most significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberAccountingEntry 1 }
jnxSubscriberAccountingHandleLoWord OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subscriber handle associated with this subscriber. A
subscriber handle is a monotonically increasing number.
This object is equal to the least significant 32 bit of the 64 bit
subscriber id."
::= { jnxSubscriberAccountingEntry 2}
jnxSubscriberAccountingUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The userName associated with this subscriber."
::= { jnxSubscriberAccountingEntry 3 }
jnxSubscriberAccountingClientType OBJECT-TYPE
SYNTAX JnxSubscriberClientType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client type for this subscriber."
::= { jnxSubscriberAccountingEntry 4 }
jnxSubscriberAccountingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client IP Address assigned to this subscriber."
::= { jnxSubscriberAccountingEntry 5 }
jnxSubscriberAccountingIpAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client IP Address Mask assigned to this subscriber."
::= { jnxSubscriberAccountingEntry 6 }
jnxSubscriberAccountingLogicalSystem OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical system associated with this subscriber."
::= { jnxSubscriberAccountingEntry 7 }
jnxSubscriberAccountingRoutingInstance OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing instance associated with this subscriber."
::= { jnxSubscriberAccountingEntry 8 }
jnxSubscriberAccountingInterface OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name of the interface associated with this subscriber."
::= { jnxSubscriberAccountingEntry 9 }
jnxSubscriberAccountingInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
static(1),
dynamic(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the interface associated with this subscriber."
::= { jnxSubscriberAccountingEntry 10 }
jnxSubscriberAccountingMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the interface associated with this subscriber."
::= { jnxSubscriberAccountingEntry 11 }
jnxSubscriberAccountingState OBJECT-TYPE
SYNTAX JnxSubscriberState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this subscriber."
::= { jnxSubscriberAccountingEntry 12 }
jnxSubscriberAccountingLoginTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time this subscriber logged in to the server."
::= { jnxSubscriberAccountingEntry 13 }
jnxSubscriberAccountingAcctSessionId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accounting session id associated with this subscriber."
::= { jnxSubscriberAccountingEntry 14 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- PIC Count Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
jnxSubscriberPicCountEntry OBJECT-TYPE
SYNTAX JnxSubscriberPicCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of Pic containing the PIC name
and the number of active subscribers on that PIC"
INDEX { jnxSubscriberPic }
::= { jnxSubscriberPicCountTable 1 }
JnxSubscriberPicCountEntry ::= SEQUENCE {
jnxSubscriberPic DisplayString,
jnxSubscriberPicTotalCounter CounterBasedGauge64 }
jnxSubscriberPic OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the PIC in string"
::= { jnxSubscriberPicCountEntry 1 }
jnxSubscriberPicTotalCounter OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active subscribers present on the PIC"
::= { jnxSubscriberPicCountEntry 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Slot Count Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
jnxSubscriberSlotCountEntry OBJECT-TYPE
SYNTAX JnxSubscriberSlotCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specification of Slot containing the slot name
and the number of active subscribers on that slot"
INDEX { jnxSubscriberSlot }
::= { jnxSubscriberSlotCountTable 1 }
JnxSubscriberSlotCountEntry ::= SEQUENCE {
jnxSubscriberSlot DisplayString,
jnxSubscriberSlotTotalCounter CounterBasedGauge64 }
jnxSubscriberSlot OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of the slot in string"
::= { jnxSubscriberSlotCountEntry 1 }
jnxSubscriberSlotTotalCounter OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active subscribers present on the slot"
::= { jnxSubscriberSlotCountEntry 2 }
END