mibs/junos/JUNIPER-TWAMP-MIB
--
-- Juniper Enterprise Specific MIB: TWAMP MIB
--
-- Copyright (c) 2007, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-TWAMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
FROM SNMPv2-SMI -- RFC2578
NOTIFICATION-TYPE, OBJECT-IDENTITY,IpAddress
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION, DisplayString
FROM SNMPv2-TC
CounterBasedGauge64
FROM HCNUM-TC
pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex
FROM DISMAN-PING-MIB
jnxTwampMibRoot, jnxTwampNotificationPrefix
FROM JUNIPER-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
jnxTwampMib MODULE-IDENTITY
LAST-UPDATED "201403010000Z"
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This mib provides data associated with the TWAMP feature"
-- revision history
REVISION "201403010000Z"
DESCRIPTION
"Initial definition."
::= { jnxTwampMibRoot 1 }
JnxTwampClientCollectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each TWAMP entry can maintain several collections of probes and
provide separate calculations over each collection. The types of
collections include:
currentTest -- the test currently being executed
lastCompletedTest -- the most recently completed test
movingAverage -- the 'n' most recent probes (n is configurable)
allTests -- all the probes (since the entry was last
reset).
Objects with this type identify a specific collection."
SYNTAX INTEGER {
currentTest (1),
lastCompletedTest (2),
movingAverage (3),
allTests (4)
}
JnxTwampClientMeasurementType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"For each individual probe, several different measurements can be
made. These include the following (all measurements are provided
in units of microseconds):
roundTripTime -- this is the delay between the the transmission of
a probe and the arrival of its response.
rttJitter -- this is the difference between the current round trip
time measurement and the previous one.
rttInterarrivalJitter -- An estimate of the statistical variance
of a packet's interarrival time. Defined in rfc1889 as:
J=J+(|D(i-1,i)|-J)/16
where J is the interarrival jitter and D(i-1, i) is the current
round trip jitter measurement.
egress -- this is the delay beween the transmission of a probe and
its arrival at its destination.
egressJitter -- this is the difference between the current egress
delay the previous measurement.
egressInterarrivalJitter -- similar to rttInterarrivalJitter, but
applied to egress jitter measurements.
ingress -- this is the delay between the transmission of a probe
response and its arrival at its destination.
ingressJitter -- this is the difference between the current ingress
delay and the previous measurement.
ingressInterarrivalJitter -- similar to rttInterarrivalJitter, but
applied to ingress jitter measurements.
Note, due to clock synchronization artifacts, many one-way
jitter measurements & calculations may include signifacant variations,
in some cases orders of magnitude greater than the round trip times.
Because of this, one-way jitter measurements will only be performed
on samples which are less than 10 seconds apart."
SYNTAX INTEGER {
roundTripTime (1),
rttJitter (2),
rttInterarrivalJitter (3),
egress (4),
egressJitter (5),
egressInterarrivalJitter (6),
ingress (7),
ingressJitter (8),
ingressInterarrivalJitter (9)
}
JnxTwampClientMeasurementSet ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Over each collection of probes, TWAMP calculates statistics for several
sets of measurements. These sets include the following:
roundTripTime -- the set of round trip delays
posRttJitter -- the set of positive round trip jitter
measurements
negRttJitter -- the set of negative round trip jitter
measurements
egress -- the set of outgoing (source to destination)
one-way delays
posEgressJitter -- the set of positive egress jitter measurements
negEgressJitter -- the set of negative egress jitter measurements
ingress -- the set of incoming (destination to source)
one-way delays
posIngressJitter -- the set of positive ingress jitter measurements
negIngressJitter -- the set of negative ingress jitter measurements
Objects with this type identify a specific set of measurements."
SYNTAX INTEGER {
roundTripTime (1),
posRttJitter (2),
negRttJitter (3),
egress (4),
posEgressJitter (5),
negEgressJitter (6),
ingress (7),
posIngressJitter (8),
negIngressJitter (9)
}
JnxTwampPercentType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-6"
STATUS current
DESCRIPTION
"Displays a percentage as decimal with 6 digits precision."
SYNTAX Unsigned32(0..100000000)
jnxTwampClientNode OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The node contains all the TWAMP client related tables."
::= {jnxTwampMib 1}
jnxTwampRpmIdentity OBJECT-TYPE
SYNTAX INTEGER {
rpm(1),
twamp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is added to be binded to the traps. This object simply identifies if
its an RPM type of test or a TWAMP type of test."
::= {jnxTwampMib 2}
--
-- Sample Results Table
--
jnxTwampClientResultsSampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientResultsSampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides measurements from the latest individual TWAMP
probe samples. Within each sample, the specific measurement type
is identified by jnxTwampClientResSampleType. Note, if the latest
probe was unsuccessful, no measurement types will be available.
See the definition of JnxTwampClientMeasurementType for details on
the types of measurements available."
::= { jnxTwampClientNode 1 }
jnxTwampClientResultsSampleEntry OBJECT-TYPE
SYNTAX JnxTwampClientResultsSampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides a specific measurement type for a single
probe."
INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSampleType }
::= { jnxTwampClientResultsSampleTable 1 }
JnxTwampClientResultsSampleEntry ::=
SEQUENCE {
jnxTwampResSampleType JnxTwampClientMeasurementType,
jnxTwampResSampleValue Integer32,
jnxTwampResSampleDate DateAndTime
}
jnxTwampResSampleType OBJECT-TYPE
SYNTAX JnxTwampClientMeasurementType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the specific measurement type returned
by jnxTwampResSampleValue."
::= { jnxTwampClientResultsSampleEntry 1 }
jnxTwampResSampleValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the measurement identified by the corresponding
jnxTwampResSampleType."
::= { jnxTwampClientResultsSampleEntry 2 }
jnxTwampResSampleDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the date and time of when this measurement
was obtained."
::= { jnxTwampClientResultsSampleEntry 3 }
--
-- Summary Results Table
--
jnxTwampClientResultsSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientResultsSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides a summary of the results for a specific
TWAMP entry (identified by pingCtlOwnerIndex/pingCtlTestName).
The scope of the summary is identified by jnxTwampClientResSumCollection."
::= { jnxTwampClientNode 2 }
jnxTwampClientResultsSummaryEntry OBJECT-TYPE
SYNTAX JnxTwampClientResultsSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the table provides a summary of the TWAMP results
over a single collection of probes(test session). For each TWAMP entry, there
are several collections maintained: the current test, the
most recently completed test, a configurable number of the most
recent probes (aka 'moving average'), and a global collection
representing all the probes. Each entry in this table summarizes
the results for one of these collections."
INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSumCollection }
::= { jnxTwampClientResultsSummaryTable 1 }
JnxTwampClientResultsSummaryEntry ::=
SEQUENCE {
jnxTwampResSumCollection JnxTwampClientCollectionType,
jnxTwampResSumSent Unsigned32,
jnxTwampResSumReceived Unsigned32,
jnxTwampResSumPercentLost JnxTwampPercentType,
jnxTwampResSumDate DateAndTime
}
jnxTwampResSumCollection OBJECT-TYPE
SYNTAX JnxTwampClientCollectionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifes the collection of probes over which the
summary data represented by the other objects in this table
applies. Note, if a collection type is not supported or not
configured, it will not be instantiated in this table."
::= { jnxTwampClientResultsSummaryEntry 1 }
jnxTwampResSumSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the number of probes sent within the
collection identified by jnxTwampResSumCollection."
::= { jnxTwampClientResultsSummaryEntry 2 }
jnxTwampResSumReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the number of probes received within the
collection identified by jnxTwampResSumCollection."
::= { jnxTwampClientResultsSummaryEntry 3 }
jnxTwampResSumPercentLost OBJECT-TYPE
SYNTAX JnxTwampPercentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the percentage of probes lost within the
collection identified by jnxTwampResSumCollection."
::= { jnxTwampClientResultsSummaryEntry 4 }
jnxTwampResSumDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the date and time of when the most recent
probe within the collection identified by jnxTwampResSumCollection
was completed."
::= { jnxTwampClientResultsSummaryEntry 5 }
---
--Calculated Results Table
--
jnxTwampClientResultsCalculatedTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientResultsCalculatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides a set of calculated values for each
TWAMP entry, for each collection of probes maintained within that
entry, and for each supported measurement set within that
collection of probes.
This table will skip over any measurement set for which
there are 0 samples."
::= { jnxTwampClientNode 3 }
jnxTwampClientResultsCalculatedEntry OBJECT-TYPE
SYNTAX JnxTwampClientResultsCalculatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSumCollection,
jnxTwampResCalcSet }
::= { jnxTwampClientResultsCalculatedTable 1 }
JnxTwampClientResultsCalculatedEntry ::=
SEQUENCE {
jnxTwampResCalcSet JnxTwampClientMeasurementSet,
jnxTwampResCalcSamples Unsigned32,
jnxTwampResCalcMin Unsigned32,
jnxTwampResCalcMax Unsigned32,
jnxTwampResCalcAverage Unsigned32,
jnxTwampResCalcPkToPk Unsigned32,
jnxTwampResCalcStdDev Unsigned32,
jnxTwampResCalcSum CounterBasedGauge64
}
jnxTwampResCalcSet OBJECT-TYPE
SYNTAX JnxTwampClientMeasurementSet
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the measurement set upon which the
calculations returned by the other objects in this table are
based."
::= { jnxTwampClientResultsCalculatedEntry 1 }
jnxTwampResCalcSamples OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of samples used in this calculations."
::= { jnxTwampClientResultsCalculatedEntry 2 }
jnxTwampResCalcMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds."
::= { jnxTwampClientResultsCalculatedEntry 3 }
jnxTwampResCalcMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds."
::= { jnxTwampClientResultsCalculatedEntry 4 }
jnxTwampResCalcAverage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds."
::= { jnxTwampClientResultsCalculatedEntry 5 }
jnxTwampResCalcPkToPk OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference between the minimum and maximum of all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds."
::= { jnxTwampClientResultsCalculatedEntry 6 }
jnxTwampResCalcStdDev OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard deviation calculated over all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds."
::= { jnxTwampClientResultsCalculatedEntry 7 }
jnxTwampResCalcSum OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all the samples in the collection and measurement set
associated with this row. Values are provided in units of
microseconds."
::= { jnxTwampClientResultsCalculatedEntry 8 }
--
-- History Sample Table
--
jnxTwampClientHistorySampleTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientHistorySampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides measurements for individual TWAMP probe samples(test sessions).
In addition to the last completed sample, a configurable number of
the most recent samples are available as well. Within each sample,
the specific measurement type is identified by
jnxTwampHistSampleType. Note, if probe was unsuccessful, no
measurement types will be available for that history entry.
See the definition of JnxTwampClientMeasurementType for details on
of measurements available."
::= { jnxTwampClientNode 4 }
jnxTwampClientHistorySampleEntry OBJECT-TYPE
SYNTAX JnxTwampClientHistorySampleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,
jnxTwampHistSampleType }
::= { jnxTwampClientHistorySampleTable 1 }
JnxTwampClientHistorySampleEntry ::=
SEQUENCE {
jnxTwampHistSampleType JnxTwampClientMeasurementType,
jnxTwampHistSampleValue Integer32
}
jnxTwampHistSampleType OBJECT-TYPE
SYNTAX JnxTwampClientMeasurementType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the specific measurement type returned
by jnxTwampHistSampleValue."
::= { jnxTwampClientHistorySampleEntry 1 }
jnxTwampHistSampleValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the measurement identified by the corresponding
jnxTwampHistSampleType."
::= { jnxTwampClientHistorySampleEntry 2 }
--
-- History Summary Table
--
jnxTwampClientHistorySummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientHistorySummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides historical summary data for each collection
of probes(test session) within each TWAMP Control Entry, similar to the
jnxTwampClientResultsSummaryTable.
In addition to the current summary, this table provides the same
number of historical entries as the jnxTwampClientHistorySampleTable."
::= { jnxTwampClientNode 5 }
jnxTwampClientHistorySummaryEntry OBJECT-TYPE
SYNTAX JnxTwampClientHistorySummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,
jnxTwampHistSumCollection }
::= { jnxTwampClientHistorySummaryTable 1 }
JnxTwampClientHistorySummaryEntry ::=
SEQUENCE {
jnxTwampHistSumCollection JnxTwampClientCollectionType,
jnxTwampHistSumSent Unsigned32,
jnxTwampHistSumReceived Unsigned32,
jnxTwampHistSumPercentLost JnxTwampPercentType
}
jnxTwampHistSumCollection OBJECT-TYPE
SYNTAX JnxTwampClientCollectionType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the collection of probes whose results are summarized by
this row.
At this time, historical summaries are available only for the
current test (currentTest(1))."
::= { jnxTwampClientHistorySummaryEntry 1 }
jnxTwampHistSumSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the number of probes sent within the
collection identified by jnxTwampHistSumCollection."
::= { jnxTwampClientHistorySummaryEntry 2 }
jnxTwampHistSumReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the number of probes received within the
collection identified by jnxTwampHistSumCollection."
::= { jnxTwampClientHistorySummaryEntry 3 }
jnxTwampHistSumPercentLost OBJECT-TYPE
SYNTAX JnxTwampPercentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the percentage of probes lost within the
collection identified by jnxTwampHistSumCollection."
::= { jnxTwampClientHistorySummaryEntry 4 }
--
-- History Calculated Table
--
jnxTwampClientHistoryCalculatedTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientHistoryCalculatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides a set of calculated values for each
TWAMP control entry, for each test session maintained within that
entry, and for each supported calculated type within that
collection of probes, similar to the jnxTwampClientResultsCalculatedTable.
In addition to the current summary, this table provides the same
number of historical entries as the jnxTwampClientHistorySampleTable."
::= { jnxTwampClientNode 6 }
jnxTwampClientHistoryCalculatedEntry OBJECT-TYPE
SYNTAX JnxTwampClientHistoryCalculatedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,
jnxTwampHistSumCollection, jnxTwampHistCalcSet }
::= { jnxTwampClientHistoryCalculatedTable 1 }
JnxTwampClientHistoryCalculatedEntry ::=
SEQUENCE {
jnxTwampHistCalcSet JnxTwampClientMeasurementSet,
jnxTwampHistCalcSamples Unsigned32,
jnxTwampHistCalcMin Unsigned32,
jnxTwampHistCalcMax Unsigned32,
jnxTwampHistCalcAverage Unsigned32,
jnxTwampHistCalcPkToPk Unsigned32,
jnxTwampHistCalcStdDev Unsigned32,
jnxTwampHistCalcSum CounterBasedGauge64
}
jnxTwampHistCalcSet OBJECT-TYPE
SYNTAX JnxTwampClientMeasurementSet
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the measurement set upon which the
calculations returned by the other objects in this table are
based."
::= { jnxTwampClientHistoryCalculatedEntry 1 }
jnxTwampHistCalcSamples OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of samples used in this calculations."
::= { jnxTwampClientHistoryCalculatedEntry 2 }
jnxTwampHistCalcMin OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds."
::= { jnxTwampClientHistoryCalculatedEntry 3 }
jnxTwampHistCalcMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds."
::= { jnxTwampClientHistoryCalculatedEntry 4 }
jnxTwampHistCalcAverage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of all the samples in the collection and measurement
set associated with this row. Values are provided in units
of microseconds."
::= { jnxTwampClientHistoryCalculatedEntry 5 }
jnxTwampHistCalcPkToPk OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference between the minimum and maximum of all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds."
::= { jnxTwampClientHistoryCalculatedEntry 6 }
jnxTwampHistCalcStdDev OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The standard deviation calculated over all the samples
in the collection and measurement set associated with this row.
Values are provided in units of microseconds."
::= { jnxTwampClientHistoryCalculatedEntry 7 }
jnxTwampHistCalcSum OBJECT-TYPE
SYNTAX CounterBasedGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all the samples in the collection and measurement set
associated with this row. Values are provided in units of
microseconds."
::= { jnxTwampClientHistoryCalculatedEntry 8 }
-- Control Sessions Table --
jnxTwampClientControlConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientCCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Client Sessions."
::= { jnxTwampClientNode 7 }
jnxTwampClientCCEntry OBJECT-TYPE
SYNTAX JnxTwampClientCCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TWAMP Client Session characteristics."
INDEX { jnxTwampClientControlConnectionID }
::= { jnxTwampClientControlConnectionTable 1 }
JnxTwampClientCCEntry ::=
SEQUENCE {
jnxTwampClientControlConnectionID SnmpAdminString,
jnxTwampClientCCName DisplayString,
jnxTwampClientCCStatus INTEGER(0..65535),
jnxTwampClientServerAddress IpAddress,
jnxTwampClientServerPort INTEGER(0..65535),
jnxTwampClientTSConfiguredCount INTEGER(0..65535),
jnxTwampClientTSActiveCount INTEGER(0..65535),
jnxTwampClientAuthMode INTEGER(0..65535)
}
jnxTwampClientControlConnectionID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TWAMP Client control session ID."
::= { jnxTwampClientCCEntry 1 }
jnxTwampClientCCName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Text string containing the session's unique name."
::= { jnxTwampClientCCEntry 2 }
jnxTwampClientCCStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
stopped(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the control session is active, this would return 1.
If the control session does not have any currently
running test sessions and is not active, this would return 2."
::= { jnxTwampClientCCEntry 3 }
jnxTwampClientServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Server IP address for TWAMP TCP control session."
::= { jnxTwampClientCCEntry 4 }
jnxTwampClientServerPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination port for TWAMP TCP control connection."
::= { jnxTwampClientCCEntry 5 }
jnxTwampClientTSConfiguredCount OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number test sessions configured."
::= { jnxTwampClientCCEntry 6 }
jnxTwampClientTSActiveCount OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of test sessions currently running."
::= { jnxTwampClientCCEntry 7 }
jnxTwampClientAuthMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
authenticated(2),
encrypted(3),
controlOnlyEncrypted(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authenticated mode for the control session."
::= {jnxTwampClientCCEntry 8 }
--- Table containing entries for all test sessions
jnxTwampClientTestSessionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxTwampClientTSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Test Sessions."
::= {jnxTwampClientNode 8}
jnxTwampClientTSEntry OBJECT-TYPE
SYNTAX JnxTwampClientTSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TWAMP Test Session characteristics."
INDEX {pingCtlOwnerIndex, jnxTwampClientTestSessionID }
::= { jnxTwampClientTestSessionsTable 1 }
JnxTwampClientTSEntry ::= SEQUENCE {
jnxTwampClientTestSessionID SnmpAdminString,
jnxTwampClientTSName DisplayString,
jnxTwampClientTSStatus INTEGER,
jnxTwampClientTSSenderAddress IpAddress,
jnxTwampClientTSSenderPort INTEGER,
jnxTwampClientTSReflectorAddress IpAddress,
jnxTwampClientTSReflectorPort INTEGER
}
jnxTwampClientTestSessionID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Test Session ID."
::= { jnxTwampClientTSEntry 1 }
jnxTwampClientTSName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TWAMP Test Session Name."
::= {jnxTwampClientTSEntry 2 }
jnxTwampClientTSStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
stopped (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TWAMP Test Session status."
::= {jnxTwampClientTSEntry 3 }
jnxTwampClientTSSenderAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Twamp Test Sender Address."
::= {jnxTwampClientTSEntry 4 }
jnxTwampClientTSSenderPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TWAMP Test Session Sender Port."
::= {jnxTwampClientTSEntry 5 }
jnxTwampClientTSReflectorAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TWAMP Test Session Reflector Address."
::= {jnxTwampClientTSEntry 6}
jnxTwampClientTSReflectorPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TWAMP Test Session Reflector Port. "
::= {jnxTwampClientTSEntry 7 }
twampNotifications OBJECT IDENTIFIER ::= {jnxTwampNotificationPrefix 1 }
jnxTwampClientControlConnectionClosed NOTIFICATION-TYPE
OBJECTS {
jnxTwampClientCCName
}
STATUS current
DESCRIPTION
"This trap is generated when all the test iterations configured under the control
connection finish running and control connection is closed."
::= {twampNotifications 1 }
jnxTwampClientTestIterationFinished NOTIFICATION-TYPE
OBJECTS {
jnxTwampClientCCName
}
STATUS current
DESCRIPTION
"This trap is generated when one test iteration is finished for all the
test sessions configured under the control connection."
::= {twampNotifications 2 }
END