mibs/junos/JUNIPER-USERFIREWALL-MIB
--
-- Enterprise Specific MIB: UserFirewalls MIB
--
-- Copyright (c) 2019, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-USERFIREWALL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
jnxUserFirewallsRoot
FROM JUNIPER-SMI;
jnxUserFirewalls MODULE-IDENTITY
LAST-UPDATED "201909261553Z" -- Wed Jan 23 15:53:50 2019 UTC
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This is Juniper Networks' implementation of enterprise
specific MIB for user firewalls' counters."
REVISION "201909261553Z" -- Wed Jan 23 15:53:50 2019 UTC
DESCRIPTION "MIB support for user firewall counters."
::= { jnxUserFirewallsRoot 1}
jnxUserFwTable OBJECT IDENTIFIER ::= { jnxUserFirewalls 1 }
jnxUserFwJIMSServerScalar OBJECT IDENTIFIER ::= { jnxUserFirewalls 2 }
jnxUserFwDomainAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxUserFwDomainAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of authentication table entries.
Data showed should be consistent with CLI:
show services user-identification authentication-table counter.
There no distinction between primary and secondary for the time being."
::= { jnxUserFwTable 1 }
jnxUserFwDomainAuthEntry OBJECT-TYPE
SYNTAX JnxUserFwDomainAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal counters by domain of an authentication table entry."
INDEX { jnxUserFwDomain }
::= { jnxUserFwDomainAuthTable 1 }
JnxUserFwDomainAuthEntry ::= SEQUENCE
{
jnxUserFwDomain DisplayString,
jnxUserFwAuthCPCounter Unsigned32,
jnxUserFwAuthJIMSCounter Unsigned32,
jnxUserFwAuthValidCounter Unsigned32,
jnxUserFwAuthPendingCounter Unsigned32,
jnxUserFwAuthInvalidCounter Unsigned32,
jnxUserFwAuthTotalCounter Unsigned32,
jnxUserFwAuthADCounter Unsigned32
}
jnxUserFwDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user firewall domain name."
::= { jnxUserFwDomainAuthEntry 1 }
jnxUserFwAuthCPCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of cp authentication entries."
::= { jnxUserFwDomainAuthEntry 2 }
jnxUserFwAuthJIMSCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of JIMS(Juniper Identity Management Service) authentication entries."
::= { jnxUserFwDomainAuthEntry 3 }
jnxUserFwAuthValidCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of valid authentication entries."
::= { jnxUserFwDomainAuthEntry 4 }
jnxUserFwAuthPendingCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of pending authentication entries."
::= { jnxUserFwDomainAuthEntry 5 }
jnxUserFwAuthInvalidCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of invalid authentication entries."
::= { jnxUserFwDomainAuthEntry 6 }
jnxUserFwAuthTotalCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of total authentication entries."
::= { jnxUserFwDomainAuthEntry 7 }
jnxUserFwAuthADCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter of AD(Active Directory) authentication entries."
::= { jnxUserFwDomainAuthEntry 8 }
jnxUserFwADDomCtlrTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxUserFwADDomCtlrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table to check status information for the Active Directory domain controllers
configured for the integrated user firewall feature.
This table also defines OID for numbers of total queries and failed queries
to the event log on the domain controller for address-to-user mappings."
::= { jnxUserFwTable 2 }
jnxUserFwADDomCtlrEntry OBJECT-TYPE
SYNTAX JnxUserFwADDomCtlrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of current status of Active Directory domain controller."
INDEX {jnxUserFwADDomain, jnxUserFwADDomCtrlerAddr}
::= { jnxUserFwADDomCtlrTable 1 }
JnxUserFwADDomCtlrEntry ::= SEQUENCE
{
jnxUserFwADDomain DisplayString,
jnxUserFwADDomCtrlerAddr DisplayString,
jnxUserFwADDomCtrlerName DisplayString,
jnxUserFwADDomCtrlerConnStatus DisplayString,
jnxUserFwADDomTotalLogQuery Unsigned32,
jnxUserFwADDomFailedLogQuery Unsigned32,
jnxUserFwADDomRecordsFetched Unsigned32
}
jnxUserFwADDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Domain name."
::= { jnxUserFwADDomCtlrEntry 1 }
jnxUserFwADDomCtrlerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip address of doamin controller."
::= { jnxUserFwADDomCtlrEntry 2 }
jnxUserFwADDomCtrlerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Domain controller name."
::= { jnxUserFwADDomCtlrEntry 3 }
jnxUserFwADDomCtrlerConnStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Domain controller connection status."
::= { jnxUserFwADDomCtlrEntry 4 }
jnxUserFwADDomTotalLogQuery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total log query times."
::= { jnxUserFwADDomCtlrEntry 5 }
jnxUserFwADDomFailedLogQuery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failed log query times."
::= { jnxUserFwADDomCtlrEntry 6 }
jnxUserFwADDomRecordsFetched OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of records fetched."
::= { jnxUserFwADDomCtlrEntry 7 }
jnxUserFwLDAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxUserFwLDAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LDAP or user-group-mapping query statistics for each configured LDAP server."
::= { jnxUserFwTable 3 }
jnxUserFwLDAPEntry OBJECT-TYPE
SYNTAX JnxUserFwLDAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of LDAP or user-group-mapping query statistics for each configured LDAP server by domain."
INDEX { jnxUserFwLDAPDomain, jnxUserFwLDAPHost}
::= { jnxUserFwLDAPTable 1 }
JnxUserFwLDAPEntry ::= SEQUENCE
{
jnxUserFwLDAPDomain DisplayString,
jnxUserFwLDAPHost DisplayString,
jnxUserFwLDAPTotalQuery Unsigned32,
jnxUserFwLDAPFailedQuery Unsigned32
}
jnxUserFwLDAPDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LDAP domain name."
::= { jnxUserFwLDAPEntry 1 }
jnxUserFwLDAPHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LDAP Host."
::= { jnxUserFwLDAPEntry 2 }
jnxUserFwLDAPTotalQuery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total LDAP query number."
::= { jnxUserFwLDAPEntry 3 }
jnxUserFwLDAPFailedQuery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LDAP failed query number."
::= { jnxUserFwLDAPEntry 4 }
jnxUserFwProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxUserFwProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PC Probe statistics."
::= { jnxUserFwTable 4 }
jnxUserFwProbeEntry OBJECT-TYPE
SYNTAX JnxUserFwProbeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of PC Probe statistics."
INDEX { jnxUserFwDomainName }
::= { jnxUserFwProbeTable 1 }
JnxUserFwProbeEntry ::= SEQUENCE
{
jnxUserFwDomainName DisplayString,
jnxUserFwTotalUserProbeNum Unsigned32,
jnxUserFwFailedUserProbeNum Unsigned32
}
jnxUserFwDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Domain name."
::= { jnxUserFwProbeEntry 1 }
jnxUserFwTotalUserProbeNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total user probe number."
::= { jnxUserFwProbeEntry 2 }
jnxUserFwFailedUserProbeNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failed user probe number."
::= { jnxUserFwProbeEntry 3 }
---
---Scalar Objects
---
jnxUserFwPriServAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary server address."
::= { jnxUserFwJIMSServerScalar 1 }
jnxUserFwPriServQuerySentNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Batch query sent number to primary server."
::= { jnxUserFwJIMSServerScalar 2 }
jnxUserFwPriServQueryRespNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Batch query total response number to primary server."
::= { jnxUserFwJIMSServerScalar 3}
jnxUserFwPriServQueryErrNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Batch query error response number to primary server."
::= { jnxUserFwJIMSServerScalar 4 }
jnxUserFwPriServIPQuerySentNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP query sent number to primary server."
::= { jnxUserFwJIMSServerScalar 5 }
jnxUserFwPriServIPQueryRespNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP query total response number to primary server."
::= { jnxUserFwJIMSServerScalar 6 }
jnxUserFwPriServIPQueryErrNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP query error response number to primary server."
::= { jnxUserFwJIMSServerScalar 7 }
jnxUserFwSecServAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary server address."
::= { jnxUserFwJIMSServerScalar 8 }
jnxUserFwSecServQuerySentNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Batch query sent number to secondary server."
::= { jnxUserFwJIMSServerScalar 9 }
jnxUserFwSecServQueryRespNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Batch query total response number to secondary server."
::= { jnxUserFwJIMSServerScalar 10 }
jnxUserFwSecServQueryErrNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Batch query error response number to secondary server."
::= { jnxUserFwJIMSServerScalar 11 }
jnxUserFwSecServIPQuerySentNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP query sent number to secondary server."
::= { jnxUserFwJIMSServerScalar 12 }
jnxUserFwSecServIPQueryRespNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP query total response number to secondary server."
::= { jnxUserFwJIMSServerScalar 13 }
jnxUserFwSecServIPQueryErrNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP query error response number to secondary server."
::= { jnxUserFwJIMSServerScalar 14 }
END