mibs/junos/JUNIPER-VIRTUALCHASSIS-MIB
--
-- Juniper Enterprise Specific MIB: Virtual Chassis
--
-- Copyright (c) 2007-2014, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
JUNIPER-VIRTUALCHASSIS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter64 FROM SNMPv2-SMI
OBJECT-IDENTITY FROM SNMPv2-SMI
NOTIFICATION-TYPE FROM SNMPv2-SMI
MacAddress,DisplayString FROM SNMPv2-TC
JnxChassisId FROM JUNIPER-MIB
jnxVccpNotifications FROM JUNIPER-SMI
jnxExVirtualChassis FROM JUNIPER-EX-SMI;
jnxVirtualChassisMemberMIB MODULE-IDENTITY
LAST-UPDATED "201403180000Z" -- 18 March, 2014
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
"Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"The MIB modules for Virtual Chassis Member.Virtual Chassis Member feature allows a set of
Juniper switches to be connected together to form a Virtual Chassis. A virtual chassis
will give all the features of a real chassis, potentially at a much lower cost points.
A virtual chassis will be managed as a single box and will appear as a single network
element to other switches and routers in the network. Some Juniper switches will have
the special high speed stacking ports which are used to connect to each other to form a
stack. The Juniper switches can also be connected by the network ports to form a stack.
These can be used by Juniper switches that don't have dedicated stacking ports."
REVISION
"201007130000Z" -- 13 July, 2010
DESCRIPTION
"Added jnxVccpMemberUp and jnxVccpMemberDown Traps."
REVISION
"201010140000Z" -- 14 October, 2010
DESCRIPTION
"Modified the range for jnxVirtualChassisMemberPriority from 0 to 255."
REVISION
"201403180000Z" -- 18 March, 2014
DESCRIPTION
"Generalize the MIB description for other Juniper platforms and update
the jnxVirtualChassisMemberId from 9 to 31."
::= { jnxExVirtualChassis 1 }
--
-- virtual chassis table
--
jnxVirtualChassisMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVirtualChassisMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of virtual chassis Member information entries."
::= { jnxVirtualChassisMemberMIB 1 }
jnxVirtualChassisMemberEntry OBJECT-TYPE
SYNTAX JnxVirtualChassisMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the virtual chassis Member information table."
INDEX { jnxVirtualChassisMemberId }
::= { jnxVirtualChassisMemberTable 1 }
JnxVirtualChassisMemberEntry ::=
SEQUENCE {
jnxVirtualChassisMemberId INTEGER,
jnxVirtualChassisMemberSerialnumber DisplayString,
jnxVirtualChassisMemberRole INTEGER,
jnxVirtualChassisMemberMacAddBase MacAddress,
jnxVirtualChassisMemberSWVersion DisplayString ,
jnxVirtualChassisMemberPriority INTEGER,
jnxVirtualChassisMemberUptime INTEGER,
jnxVirtualChassisMemberModel DisplayString,
jnxVirtualChassisMemberLocation DisplayString,
jnxVirtualChassisMemberAlias DisplayString,
jnxVirtualChassisMemberFabricMode DisplayString,
jnxVirtualChassisMemberMixedMode DisplayString
}
jnxVirtualChassisMemberId OBJECT-TYPE
SYNTAX INTEGER (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the virtual-chassis member."
::= { jnxVirtualChassisMemberEntry 1 }
jnxVirtualChassisMemberSerialnumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number of the virtual-chassis member."
::= { jnxVirtualChassisMemberEntry 2 }
jnxVirtualChassisMemberRole OBJECT-TYPE
SYNTAX INTEGER {
master (1),
backup (2),
linecard (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the virtual-chassis member is of the type:
master(1), backup(2), linecard (3) "
::= { jnxVirtualChassisMemberEntry 3 }
jnxVirtualChassisMemberMacAddBase OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies Media Access Control Address base for the virtual-chassis member."
::= { jnxVirtualChassisMemberEntry 4 }
jnxVirtualChassisMemberSWVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the JUNOS Base OS Software suite running on the virtual-chassis
member."
::= { jnxVirtualChassisMemberEntry 5 }
jnxVirtualChassisMemberPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the priority of the virtual-chassis member which can
vary from 0 to 255."
::= { jnxVirtualChassisMemberEntry 6 }
jnxVirtualChassisMemberUptime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the virtual-chassis member uptime. "
::= { jnxVirtualChassisMemberEntry 7 }
jnxVirtualChassisMemberModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the virtual-chassis member model. "
::= { jnxVirtualChassisMemberEntry 8 }
jnxVirtualChassisMemberLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the virtual-chassis member location. "
::= { jnxVirtualChassisMemberEntry 9 }
jnxVirtualChassisMemberAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alias name for the virtual-chassis member."
::= { jnxVirtualChassisMemberEntry 10 }
jnxVirtualChassisMemberFabricMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies virtual-chassis member's route mode. VC/VCF mode
indicates multi-path routing is disabled/enabled for the member. "
::= { jnxVirtualChassisMemberEntry 11 }
jnxVirtualChassisMemberMixedMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies virtual-chassis member's mixed mode. If mixed-mode is
is enabled, devices from different product families are allowed
to become virtual chassis member. "
::= { jnxVirtualChassisMemberEntry 12 }
-- jnxVirtualChassisPortTable holds the vccp port's admin/operation status
jnxVirtualChassisPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVirtualChassisPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of virtual chassis port information entries."
::= { jnxVirtualChassisMemberMIB 2 }
jnxVirtualChassisPortEntry OBJECT-TYPE
SYNTAX JnxVirtualChassisPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the virtual chassis port information table."
INDEX { jnxVirtualChassisFpcId, jnxVirtualChassisPortName }
::= { jnxVirtualChassisPortTable 1 }
JnxVirtualChassisPortEntry ::=
SEQUENCE {
jnxVirtualChassisFpcId INTEGER,
jnxVirtualChassisPortName DisplayString,
jnxVirtualChassisPortAdminStatus INTEGER,
jnxVirtualChassisPortOperStatus INTEGER,
jnxVirtualChassisPortInPkts Counter64,
jnxVirtualChassisPortOutPkts Counter64,
jnxVirtualChassisPortInOctets Counter64,
jnxVirtualChassisPortOutOctets Counter64,
jnxVirtualChassisPortInMcasts Counter64,
jnxVirtualChassisPortOutMcasts Counter64,
jnxVirtualChassisPortInPkts1secRate Counter64,
jnxVirtualChassisPortOutPkts1secRate Counter64,
jnxVirtualChassisPortInOctets1secRate Counter64,
jnxVirtualChassisPortOutOctets1secRate Counter64,
jnxVirtualChassisPortCarrierTrans Counter64,
jnxVirtualChassisPortInCRCAlignErrors Counter64,
jnxVirtualChassisPortUndersizePkts Counter64,
jnxVirtualChassisPortCollisions Counter64
}
jnxVirtualChassisFpcId OBJECT-TYPE
SYNTAX INTEGER (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the virtual-chassis member."
::= { jnxVirtualChassisPortEntry 1 }
jnxVirtualChassisPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the port name of this
vccp port, which is typically but not limited to, a
function of the state of individual segments of
this port."
::= { jnxVirtualChassisPortEntry 2 }
jnxVirtualChassisPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual admin status of this
vccp port, which is typically but not limited to, a
function of the state of individual segments of
this port."
::= { jnxVirtualChassisPortEntry 3 }
jnxVirtualChassisPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual operational status of this
vccp port, which is typically but not limited to, a
function of the state of individual segments of
this port."
::= { jnxVirtualChassisPortEntry 4 }
jnxVirtualChassisPortInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of packets received on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortInPkts"
::= { jnxVirtualChassisPortEntry 5 }
jnxVirtualChassisPortOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of packets sent from the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortOutPkts"
::= { jnxVirtualChassisPortEntry 6 }
jnxVirtualChassisPortInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of octets received on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortInOctets"
::= { jnxVirtualChassisPortEntry 7 }
jnxVirtualChassisPortOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of octets sent on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortOutOctets"
::= { jnxVirtualChassisPortEntry 8 }
jnxVirtualChassisPortInMcasts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of multicast packets received on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortInMcasts"
::= { jnxVirtualChassisPortEntry 9 }
jnxVirtualChassisPortOutMcasts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of multicast packets sent from the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortOutMcasts"
::= { jnxVirtualChassisPortEntry 10 }
jnxVirtualChassisPortInPkts1secRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of packets received per second on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortInPkts1secRate"
::= { jnxVirtualChassisPortEntry 11 }
jnxVirtualChassisPortOutPkts1secRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of packets sent per second from the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortOutPkts1secRate"
::= { jnxVirtualChassisPortEntry 12 }
jnxVirtualChassisPortInOctets1secRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of octets received per secondon the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortInOctets1secRate"
::= { jnxVirtualChassisPortEntry 13 }
jnxVirtualChassisPortOutOctets1secRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of octets sent per second on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortOutOctets1secRate"
::= { jnxVirtualChassisPortEntry 14 }
jnxVirtualChassisPortCarrierTrans OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of Carrier errors on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortCarrierTrans"
::= { jnxVirtualChassisPortEntry 15 }
jnxVirtualChassisPortInCRCAlignErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of Input CRC Alignment errors on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortInCRCAlignErrors"
::= { jnxVirtualChassisPortEntry 16 }
jnxVirtualChassisPortUndersizePkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of Undersize Packets on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortUndersizePkts"
::= { jnxVirtualChassisPortEntry 17 }
jnxVirtualChassisPortCollisions OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the total number of Collisions on the
virtual-chassis port. This object is a 64-bit version of
jnxVirtualChassisPortCollisions"
::= { jnxVirtualChassisPortEntry 18 }
jnxVccpNotificationsPrefix OBJECT-IDENTITY
STATUS current
DESCRIPTION
"All Virtual Chassis notifications are registered
under this branch."
::= { jnxVccpNotifications 0 }
-- ***********************************************************
-- VCCP NOTIFICATIONS
-- ***********************************************************
jnxVccpPortUp NOTIFICATION-TYPE
OBJECTS { jnxVirtualChassisPortAdminStatus,
jnxVirtualChassisPortOperStatus,
jnxVirtualChassisMemberModel,
jnxVirtualChassisMemberLocation }
STATUS current
DESCRIPTION
"A PortUp trap signifies that the SNMP entity, acting in an
agent role, has detected that the jnxVirtualChassisPortOperStatus
object for one of its communication links left the down state
and transitioned into some other state (but not into the
notPresent state). This other state is indicated by the
included value of jnxVirtualChassisPortOperStatus."
::= { jnxVccpNotificationsPrefix 1 }
jnxVccpPortDown NOTIFICATION-TYPE
OBJECTS { jnxVirtualChassisPortAdminStatus,
jnxVirtualChassisPortOperStatus,
jnxVirtualChassisMemberModel,
jnxVirtualChassisMemberLocation }
STATUS current
DESCRIPTION
"A PortDown trap signifies that the SNMP entity, acting in an
agent role, has detected that the jnxVirtualChassisPortOperStatus
object for one of its communication links is about to enter the
down state from some other state (but not into the
notPresent state). This other state is indicated by the
included value of jnxVirtualChassisPortOperStatus."
::= { jnxVccpNotificationsPrefix 2 }
jnxVccpMemberUp NOTIFICATION-TYPE
OBJECTS { jnxVirtualChassisMemberSerialnumber,
jnxVirtualChassisMemberRole,
jnxVirtualChassisMemberModel,
jnxVirtualChassisMemberLocation }
STATUS current
DESCRIPTION
"A MemberUp trap signifies that the SNMP entity, acting in an
agent role, has detected that the Member present at the location
jnxVirtualChassisMemberLocation on one of the Virtual
Chassis left the down state and transitioned into some other
state (but not into the notPresent state)."
::= { jnxVccpNotificationsPrefix 3 }
jnxVccpMemberDown NOTIFICATION-TYPE
OBJECTS { jnxVirtualChassisMemberSerialnumber,
jnxVirtualChassisMemberRole,
jnxVirtualChassisMemberModel,
jnxVirtualChassisMemberLocation }
STATUS current
DESCRIPTION
"A MemberDown trap signifies that the SNMP entity, acting in an
agent role, has detected that the Member present at the location
jnxVirtualChassisMemberLocation on one of the Virtual
Chassis is about to enter the down state (but not into the notPresent
state)."
::= { jnxVccpNotificationsPrefix 4 }
END