mibs/junos/VPLS-BGP-DRAFT-01-MIB
VPLS-BGP-DRAFT-01-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, transmission
FROM SNMPv2-SMI -- RFC2578
OBJECT-GROUP
FROM SNMPv2-CONF -- RFC2580
RowStatus, StorageType, TEXTUAL-CONVENTION
FROM SNMPv2-TC -- RFC2579
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC3411
jnxExperiment
FROM JUNIPER-SMI
jnxVplsConfigIndex, jnxVplsPwBindIndex
FROM VPLS-GENERIC-DRAFT-01-MIB;
jnxVplsBgpDraft01MIB MODULE-IDENTITY
LAST-UPDATED "200612061200Z" -- 06 Dec 2006 12:00:00 GMT
ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
Working Group"
CONTACT-INFO
"
V. J. Shah
Email: vshah@juniper.net
The L2VPN Working Group (email distribution l2vpn@ietf.org,
http://www.ietf.org/html.charters/l2vpn-charter.html)
"
DESCRIPTION
"Copyright (C) The IETF Trust (2010). The initial
version of this MIB module was published in RFC XXXX.
-- RFC Editor: Please replace XXXX with RFC number & remove
-- this note.
For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB module contains managed object definitions for
BGP signalled Virtual Private LAN Services as in
[RFC4761]
This MIB module enables the use of any underlying PseudoWire
network. "
-- Revision history.
REVISION
"200612061200Z" -- 06 Dec 2006 12:00:00 GMT
DESCRIPTION "Initial version published as part of RFC YYYY."
-- RFC Editor: please replace YYYY with IANA assigned value, and
-- delete this note.
::= { jnxExperiment 10 }
-- RFC Editor: please replace XXXX with IANA assigne value, and
-- delete this note.
-- VPLS BGP specific Textual Conventions.
-- JnxVplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "Syntax for a route distinguisher. For a complete
-- definition of a route distinguisher, see [RFC4364].
-- For more details on use of a route distinguisher
-- for a VPLS service, see [RFC4761]"
-- REFERENCE
-- "[RFC4364]"
-- SYNTAX OCTET STRING(SIZE (0..256))
-- JnxVplsBgpRouteTarget ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "Syntax for a route target. For a complete
-- definition of a route target, see [RFC4364]."
-- REFERENCE
-- "[RFC4364]"
-- SYNTAX OCTET STRING(SIZE (0..256))
-- Top-level components of this MIB.
-- Tables, Scalars
jnxVplsBgpObjects OBJECT IDENTIFIER
::= { jnxVplsBgpDraft01MIB 1 }
-- Conformance
jnxVplsBgpConformance OBJECT IDENTIFIER
::= { jnxVplsBgpDraft01MIB 2 }
-- Vpls Bgp Config Table
jnxVplsBgpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsBgpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for configuring
and monitoring BGP specific parameters for
Virtual Private Lan Services(VPLS)."
::= { jnxVplsBgpObjects 1 }
jnxVplsBgpConfigEntry OBJECT-TYPE
SYNTAX JnxVplsBgpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents BGP specific information
for Virtual Private Lan Service(VPLS) in a packet network.
It is indexed by jnxVplsConfigIndex, which uniquely
identifies a single instance of a VPLS service.
A row is automatically created when a VPLS service is
configured using BGP signalling.
None of the read-create objects values can be
changed when jnxVplsRowStatus is in the active(1)
state. Changes are allowed when the jnxVplsRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the jnxVplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
"
INDEX { jnxVplsConfigIndex }
::= { jnxVplsBgpConfigTable 1 }
JnxVplsBgpConfigEntry ::=
SEQUENCE {
jnxVplsBgpConfigVERangeSize Unsigned32
}
jnxVplsBgpConfigVERangeSize OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the size of the range of VE ids in this
VPLS service. This number controls the size of the
label block advertised for this VE by the PE.
A value of 0 indicates that the range is not
configured and the PE derives the range value
from received advertisements from other PEs."
DEFVAL { 0 }
::= { jnxVplsBgpConfigEntry 1 }
-- Vpls Edge Device (VE) Identifier Table
jnxVplsBgpVETable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsBgpVEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table associates VPLS Edge devices to a VPLS service"
::= { jnxVplsBgpObjects 2 }
jnxVplsBgpVEEntry OBJECT-TYPE
SYNTAX JnxVplsBgpVEEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for each VE Id
configured on a PE for a particular VPLS service
instance."
INDEX { jnxVplsConfigIndex, jnxVplsBgpVEId }
::= { jnxVplsBgpVETable 1 }
JnxVplsBgpVEEntry ::=
SEQUENCE {
jnxVplsBgpVEId Unsigned32,
jnxVplsBgpVEName SnmpAdminString,
jnxVplsBgpVEPreference Unsigned32,
jnxVplsBgpVERowStatus RowStatus,
jnxVplsBgpVEStorageType StorageType
}
jnxVplsBgpVEId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A secondary index identifying a VE within an
instance of a VPLS service."
::= { jnxVplsBgpVEEntry 1 }
jnxVplsBgpVEName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Descriptive name for the site or u-PE assciated with
this VE Id."
DEFVAL { "" }
::= { jnxVplsBgpVEEntry 2 }
jnxVplsBgpVEPreference OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the preference of the VE Id on this PE
if the site is multi-homed and VE Id is re-used."
DEFVAL { 0 }
::= { jnxVplsBgpVEEntry 3 }
jnxVplsBgpVERowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except jnxVplsBgpSiteRowStatus."
::= { jnxVplsBgpVEEntry 5 }
jnxVplsBgpVEStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
DEFVAL { volatile }
::= { jnxVplsBgpVEEntry 6 }
-- VPLS BGP PW Binding Table
jnxVplsBgpPwBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsBgpPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides BGP specific information for
an association between a VPLS service and the
corresponding Pseudo Wires. A service can have more
than one Pseudo Wire association. Pseudo Wires are
defined in the pwTable."
::= { jnxVplsBgpObjects 3 }
jnxVplsBgpPwBindEntry OBJECT-TYPE
SYNTAX JnxVplsBgpPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the one
to many association of service to pseudowire.
An entry in this table in instantiated only when
BGP signalling is used to configure VPLS service.
Each entry in this table provides BGP specific
information for the VPlS represented by
jnxVplsConfigIndex."
INDEX { jnxVplsConfigIndex, jnxVplsPwBindIndex }
::= { jnxVplsBgpPwBindTable 1 }
JnxVplsBgpPwBindEntry ::=
SEQUENCE {
jnxVplsBgpPwBindLocalVEId Unsigned32,
jnxVplsBgpPwBindRemoteVEId Unsigned32
}
jnxVplsBgpPwBindLocalVEId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the local VE that this Pseudo Wire
is associated with."
::= { jnxVplsBgpPwBindEntry 1 }
jnxVplsBgpPwBindRemoteVEId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the remote VE that this Pseudo Wire
is associated with."
::= { jnxVplsBgpPwBindEntry 2 }
END