mibs/junos/VPLS-GENERIC-DRAFT-01-MIB
VPLS-GENERIC-DRAFT-01-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Unsigned32, Counter32, transmission
FROM SNMPv2-SMI -- RFC2578
OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC2580
TruthValue, RowStatus, StorageType, TEXTUAL-CONVENTION
FROM SNMPv2-TC -- RFC2579
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC3411
jnxExperiment
FROM JUNIPER-SMI
-- PwIndexType
-- FROM PW-TC-STD-MIB
VPNIdOrZero
FROM VPN-TC-STD-MIB; -- RFC4265
jnxVplsGenericDraft01MIB MODULE-IDENTITY
LAST-UPDATED "201103261200Z" -- 26 March 2011 12:00:00 GMT
ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
Working Group"
CONTACT-INFO
"
Thomas D. Nadeau
Email: tnadeau@cisco.com
The L2VPN Working Group (email distribution l2vpn@ietf.org,
http://www.ietf.org/html.charters/l2vpn-charter.html)
"
DESCRIPTION
"Copyright (C) The IETF Trust (2010). The initial
version of this MIB module was published in RFC XXXX.
-- RFC Editor: Please replace XXXX with RFC number & remove
-- this note.
For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB module contains generic managed object definitions
for Virtual Private LAN Services as in [RFC4762] and
[RFC4761]
This MIB module enables the use of any underlying PseudoWire
network."
-- Revision history.
REVISION
"201103261200Z" -- 26 March 2011 12:00:00 GMT
DESCRIPTION
"Removed inline definition of VPNIdOrZero in favor
of importing the definition from VPN-TC-STD-MIB.
"
REVISION
"200608301200Z" -- 30 August 2006 12:00:00 GMT
DESCRIPTION
"Changes from previous version:
1) Moved LDP Specific information to VPLS-LDP-DRAFT-01-MIB
2) Created the vplsStatusTable to store status information.
3)
"
REVISION
"200606041200Z" -- 4 June 2006 12:00:00 GMT
DESCRIPTION "Initial version published as part of RFC YYYY."
-- RFC Editor: please replace YYYY with IANA assigned value, and
-- delete this note.
::= { jnxExperiment 8 }
-- RFC Editor: please replace XXXX with IANA assigne value, and
-- delete this note.
-- Top-level components of this MIB.
PwIndexType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Pseudowire Index. A unique value, greater than zero,
for each locally-defined PW for indexing
several MIB tables associated with the particular PW.
It is recommended that values are assigned contiguously
starting from 1. The value for each PW MUST remain
constant at least from one re-initialization
to the next re-initialization.
"
SYNTAX Unsigned32 (1..4294967295)
-- Vpls BGP Autodiscovery specific Textual Convention
JnxVplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Syntax for a route distinguisher. For a complete
definition of a route distinguisher, see [RFC4364].
For more details on use of a route distinguisher
for a VPLS service, see [RFC4761]"
REFERENCE
"[RFC4364]"
SYNTAX OCTET STRING(SIZE (0..256))
JnxVplsBgpRouteTarget ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Syntax for a route target. For a complete
definition of a route target, see [RFC4364]."
REFERENCE
"[RFC4364]"
SYNTAX OCTET STRING(SIZE (0..256))
JnxVplsBgpRouteTargetType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to define the type of a route target usage.
Route targets can be specified to be imported,
exported, or both. For a complete definition of a
route target, see [RFC4364]."
REFERENCE
"[RFC4364]"
SYNTAX INTEGER { import(1), export(2), both(3) }
-- Notifications
jnxVplsNotifications OBJECT IDENTIFIER
::= { jnxVplsGenericDraft01MIB 0 }
-- Tables, Scalars
jnxVplsObjects OBJECT IDENTIFIER
::= { jnxVplsGenericDraft01MIB 1 }
-- Conformance
jnxVplsConformance OBJECT IDENTIFIER
::= { jnxVplsGenericDraft01MIB 2 }
-- PW Virtual Connection Table
jnxVplsConfigIndexNext OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for jnxVplsConfigIndex when creating entries in the
jnxVplsConfigTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of jnxVplsConfigIndex for a new entry in the
jnxVplsConfigTable, the manager issues a management
protocol retrieval operation to obtain the current
value of jnxVplsConfigIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse."
::= { jnxVplsObjects 1 }
jnxVplsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).
"
::= { jnxVplsObjects 2 }
jnxVplsConfigEntry OBJECT-TYPE
SYNTAX JnxVplsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
jnxVplsConfigIndex, which uniquely identifies a single VPLS.
A row is created by the operator or by the agent if a
VPLS service is created by non-SNMP application or
due to autodiscovery process.
None of the read-create objects values can be
changed when jnxVplsConfigRowStatus is in the active(1)
state. Changes are allowed when the jnxVplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the jnxVplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
"
INDEX { jnxVplsConfigIndex }
::= { jnxVplsConfigTable 1 }
JnxVplsConfigEntry ::=
SEQUENCE {
jnxVplsConfigIndex Unsigned32,
jnxVplsConfigName SnmpAdminString,
jnxVplsConfigDescr SnmpAdminString,
jnxVplsConfigAdminStatus INTEGER,
jnxVplsConfigMacLearning TruthValue,
jnxVplsConfigDiscardUnknownDest TruthValue,
jnxVplsConfigMacAging TruthValue,
jnxVplsConfigFwdFullHighWatermark Unsigned32,
jnxVplsConfigFwdFullLowWatermark Unsigned32,
jnxVplsConfigRowStatus RowStatus,
jnxVplsConfigMtu Unsigned32,
jnxVplsConfigVpnId VPNIdOrZero,
jnxVplsConfigServiceType INTEGER,
jnxVplsConfigStorageType StorageType
}
jnxVplsConfigIndex OBJECT-TYPE
SYNTAX Unsigned32 (1.. 2147483647)
-- MAX-ACCESS not-accessible
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique index for the conceptual row identifying
a VPLS service."
::= { jnxVplsConfigEntry 1 }
jnxVplsConfigName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual name of the VPLS.
If there is no local name, or this object is
otherwise not applicable, then this object MUST
contain a zero-length octet string."
DEFVAL { "" }
::= { jnxVplsConfigEntry 2 }
jnxVplsConfigDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the
VPLS service. If there is no information for this VPLS
service, then this object MUST contain a zero-length
octet string."
DEFVAL { "" }
::= { jnxVplsConfigEntry 3 }
jnxVplsConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The desired administrative state of the VPLS
service. If the administrative status of the
Vpls service is changed to enable then this
service is able to utilize the pseudo wire to
perform the tasks of a VPLS service.
The testing(3) state indicates that no operational
packets can be passed. "
DEFVAL { down }
::= { jnxVplsConfigEntry 4 }
jnxVplsConfigMacLearning OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies if MAC Learning is enabled
in this service. If this object is true then Mac
Learning is enabled. If false, then Mac Learning is
disabled."
DEFVAL { true }
::= { jnxVplsConfigEntry 6 }
jnxVplsConfigDiscardUnknownDest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is 'true', then frames
received with an unknown destination MAC are discarded
in this VPLS. If 'false', then the packets are
processed."
DEFVAL { false }
::= { jnxVplsConfigEntry 7 }
jnxVplsConfigMacAging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is 'true'
then the MAC ageing process is enabled in
this VPLS. If 'false', then the MAC ageing process
is disabled"
DEFVAL { true }
::= { jnxVplsConfigEntry 8 }
jnxVplsConfigFwdFullHighWatermark OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the utilization of the
forwarding database for this VPLS instance at
which the jnxVplsFwdFullAlarmRaised notification
will be sent."
DEFVAL { 95 }
::= { jnxVplsConfigEntry 10 }
jnxVplsConfigFwdFullLowWatermark OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the utilization of the
forwarding database for this VPLS instance
at which the jnxVplsFwdFullAlarmCleared
notification will be sent."
DEFVAL { 90 }
::= { jnxVplsConfigEntry 11 }
jnxVplsConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state."
::= { jnxVplsConfigEntry 12 }
jnxVplsConfigMtu OBJECT-TYPE
SYNTAX Unsigned32 (64..1518)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object specifies the MTU of this
vpls instance."
DEFVAL { 1518 }
::= { jnxVplsConfigEntry 13 }
jnxVplsConfigVpnId OBJECT-TYPE
SYNTAX VPNIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the IEEE 802-1990
VPN ID of the associated VPLS service."
::= { jnxVplsConfigEntry 14 }
jnxVplsConfigServiceType OBJECT-TYPE
SYNTAX INTEGER {
vlan (1),
ethernet (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object specifies the type of
service emulated by this vpls instance."
DEFVAL { vlan }
::= { jnxVplsConfigEntry 15 }
jnxVplsConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
DEFVAL { volatile }
::= { jnxVplsConfigEntry 16 }
-- VPLS Status table
jnxVplsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information for monitoring
Virtual Private Lan Services(VPLS).
"
::= { jnxVplsObjects 3 }
jnxVplsStatusEntry OBJECT-TYPE
SYNTAX JnxVplsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
jnxVplsConfigIndex, which uniquely identifies a single VPLS.
A row in this table is automatically created by the agent
when a VPLS service is configured.
"
INDEX { jnxVplsConfigIndex }
::= { jnxVplsStatusTable 1 }
JnxVplsStatusEntry ::=
SEQUENCE {
jnxVplsStatusOperStatus INTEGER,
jnxVplsStatusPeerCount Counter32
}
jnxVplsStatusOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this VPLS Service."
::= { jnxVplsStatusEntry 1 }
jnxVplsStatusPeerCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects specifies the number of peers
present in this vpls instance."
::= { jnxVplsStatusEntry 2 }
-- VPLS PW Binding Table
jnxVplsPwBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides an association between a
VPLS service and the corresponding Pseudo
Wires. A service can have more than one Pseudo
Wire association. Pseudo Wires are defined in
the pwTable"
::= { jnxVplsObjects 4 }
jnxVplsPwBindEntry OBJECT-TYPE
SYNTAX JnxVplsPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the one
to many association of service to
pseudowire."
INDEX { jnxVplsConfigIndex, jnxVplsPwBindIndex }
::= { jnxVplsPwBindTable 1 }
JnxVplsPwBindEntry ::=
SEQUENCE {
jnxVplsPwBindConfigType INTEGER,
jnxVplsPwBindType INTEGER,
jnxVplsPwBindRowStatus RowStatus,
jnxVplsPwBindStorageType StorageType,
jnxVplsPwBindIndex PwIndexType
}
jnxVplsPwBindConfigType OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
autodiscovery (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates
whether the Pseudo Wire binding was created
manually or via autodiscovery.
The value of this object must be
specifed when the row is created and cannot
be changed while the row status is active(1)"
::= { jnxVplsPwBindEntry 1 }
jnxVplsPwBindType OBJECT-TYPE
SYNTAX INTEGER {
mesh (1),
spoke (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates
whether the Pseudo Wire binding is of
type mesh or spoke.
The value of this object must be
specifed when the row is created and cannot
be changed while the row status is active(1)"
::= { jnxVplsPwBindEntry 2 }
jnxVplsPwBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state"
::= { jnxVplsPwBindEntry 3 }
jnxVplsPwBindStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
DEFVAL { volatile }
::= { jnxVplsPwBindEntry 4 }
-- Joe Added xxx
jnxVplsPwBindIndex OBJECT-TYPE
SYNTAX PwIndexType
-- MAX-ACCESS not-accessible
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Secondary Index for the conceptual row identifying
a pseudowire within the PwEntry which MUST
match an entry from the PW-STD-MIB's PwTable
which represents an already-provisioned
pseudowire that is then associated with this
VPLS instance.
"
::= { jnxVplsPwBindEntry 5 }
-- jnxVplsBgpADConfigTable
jnxVplsBgpADConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsBgpADConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for configuring
BGP Auto-discovery parameters for a given Vpls service.
"
::= { jnxVplsObjects 5 }
jnxVplsBgpADConfigEntry OBJECT-TYPE
SYNTAX JnxVplsBgpADConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents BGP based autodiscovery
is in use for this instance of Vpls.
A row in this table is indexed by jnxVplsConfigIndex, which
uniquely identifies a single VPLS.
None of the read-create objects can be changed when
jnxVplsBGPADConfigRowStatus is in active(1) state. Changes
are allowed when the jnxVplsBGPADConfigRowStatus is in
notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the jnxVplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
"
INDEX { jnxVplsConfigIndex }
::= { jnxVplsBgpADConfigTable 1 }
JnxVplsBgpADConfigEntry ::=
SEQUENCE {
jnxVplsBgpADConfigRouteDistinguisher JnxVplsBgpRouteDistinguisher,
jnxVplsBgpADConfigPrefix Unsigned32,
jnxVplsBgpADConfigVplsId JnxVplsBgpRouteDistinguisher,
jnxVplsBgpADConfigRowStatus RowStatus
}
jnxVplsBgpADConfigRouteDistinguisher OBJECT-TYPE
SYNTAX JnxVplsBgpRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The route distinguisher for this VPLS. See [RFC4364]
for a complete definition of a route distinguisher.
for more details on use of a route distinguisher
for a VPLS service, see [RFC4761]
"
::= { jnxVplsBgpADConfigEntry 1 }
jnxVplsBgpADConfigPrefix OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" In case of auto-discovery the default prefix advertised
is the ip address of the loopback. In case the user wants
to override the loopback address, jnxVplsBgpADConfigPrefix
should be set. When this value if non-zero it is used
as the advertised IP address in the NLRI.
"
DEFVAL { 0 }
::= { jnxVplsBgpADConfigEntry 2 }
jnxVplsBgpADConfigVplsId OBJECT-TYPE
SYNTAX JnxVplsBgpRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" VplsId is a unique identifier for all VSIs belonging to
the same VPLS. It is advertised as an extended community
"
::= { jnxVplsBgpADConfigEntry 3 }
jnxVplsBgpADConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state.
"
::= { jnxVplsBgpADConfigEntry 4 }
-- jnxVplsBgpRteTargetTable
jnxVplsBgpRteTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxVplsBgpRteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table specifies the list of Route Targets
imported or exported by BGP during auto-discovery of VPLS.
"
::= { jnxVplsObjects 6 }
jnxVplsBgpRteTargetEntry OBJECT-TYPE
SYNTAX JnxVplsBgpRteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table specifies the value of the
Route Target being used by BGP. Depending on the value
of jnxVplsBgpRteTargetType an RT might be exported or
imported or both. Every VPLS which
uses auto-discovery for finding peer nodes can import and
export multiple Route Targets. This representation allows
support for hierarchical VPLS.
"
INDEX { jnxVplsConfigIndex, jnxVplsBgpRteTargetIndex }
::= { jnxVplsBgpRteTargetTable 1 }
JnxVplsBgpRteTargetEntry ::=
SEQUENCE {
jnxVplsBgpRteTargetIndex Unsigned32,
jnxVplsBgpRteTargetRTType JnxVplsBgpRouteTargetType,
jnxVplsBgpRteTargetRT JnxVplsBgpRouteTarget,
jnxVplsBgpRteTargetRTRowStatus RowStatus
}
jnxVplsBgpRteTargetIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index along with jnxVplsConfigIndex,identifies one entry
in the jnxVplsBgpRteTargetTable. By keeping jnxVplsConfigIndex
constant and using new value of jnxVplsBgpRteTargetIndex user
can configure multiple Route Targets for the same Vpls.
"
::= { jnxVplsBgpRteTargetEntry 1 }
jnxVplsBgpRteTargetRTType OBJECT-TYPE
SYNTAX JnxVplsBgpRouteTargetType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Used to define the type of a route target usage.
Route targets can be specified to be imported,
exported, or both. For a complete definition of a
route target, see [RFC4364].
"
::= { jnxVplsBgpRteTargetEntry 2 }
jnxVplsBgpRteTargetRT OBJECT-TYPE
SYNTAX JnxVplsBgpRouteTarget
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The route target associated with the VPLS service.
For more details on use of route targets
for a VPLS service, see [RFC4761]
"
::= { jnxVplsBgpRteTargetEntry 3 }
jnxVplsBgpRteTargetRTRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified
"
::= { jnxVplsBgpRteTargetEntry 4 }
jnxVplsStatusNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to true(1), then it enables
the emission of jnxVplsStatusChanged
notification; otherwise this notification is not
emitted."
REFERENCE
"See also [RFC3413] for explanation that
notifications are under the ultimate control of the
MIB module in this document."
DEFVAL { false }
::= { jnxVplsObjects 7 }
jnxVplsNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail to
emit these notifications during that period, or may
queue them until an appropriate time. A value of 0
means no throttling is applied and events may be
notified at the rate at which they occur."
DEFVAL { 0 }
::= { jnxVplsObjects 8 }
-- VPLS Service Notifications
jnxVplsStatusChanged NOTIFICATION-TYPE
OBJECTS {
jnxVplsConfigVpnId,
jnxVplsConfigAdminStatus,
jnxVplsStatusOperStatus
}
STATUS current
DESCRIPTION
"The jnxVplsStatusChanged notification is generated
when there is a change in the administrative or
operating status of a VPLS service."
::= { jnxVplsNotifications 1 }
jnxVplsFwdFullAlarmRaised NOTIFICATION-TYPE
OBJECTS {
jnxVplsConfigVpnId,
jnxVplsConfigFwdFullHighWatermark,
jnxVplsConfigFwdFullLowWatermark
}
STATUS current
DESCRIPTION
"The jnxVplsFwdFullAlarmRaised notification is
generated when the utilization of the Forwarding
database is above the value specified by
jnxVplsConfigFwdFullHighWatermark."
::= { jnxVplsNotifications 2 }
jnxVplsFwdFullAlarmCleared NOTIFICATION-TYPE
OBJECTS {
jnxVplsConfigVpnId,
jnxVplsConfigFwdFullHighWatermark,
jnxVplsConfigFwdFullLowWatermark
}
STATUS current
DESCRIPTION
"The jnxVplsFwdFullAlarmCleared notification is
generated when the utilization of the Forwarding
database is below the value specified by
jnxVplsConfigFwdFullLowWatermark."
::= { jnxVplsNotifications 3 }
END