librenms/librenms

View on GitHub
mibs/junos/VPLS-LDP-DRAFT-01-MIB

Summary

Maintainability
Test Coverage
VPLS-LDP-DRAFT-01-MIB DEFINITIONS ::= BEGIN

      IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
      Unsigned32, Counter32, transmission
         FROM SNMPv2-SMI                    -- RFC2578

      OBJECT-GROUP, NOTIFICATION-GROUP
         FROM SNMPv2-CONF                   -- RFC2580

      TruthValue, RowStatus, StorageType, TEXTUAL-CONVENTION
         FROM SNMPv2-TC                     -- RFC2579

      jnxExperiment
    FROM JUNIPER-SMI

      jnxVplsConfigIndex, jnxVplsPwBindIndex
               FROM VPLS-GENERIC-DRAFT-01-MIB;

   jnxVplsLdpDraft01MIB MODULE-IDENTITY
      LAST-UPDATED "200608301200Z"  -- 20 August 2006 12:00:00 GMT
      ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
                                 Working  Group"
      CONTACT-INFO
          "
           Thomas D. Nadeau
           Email:  tnadeau@cisco.com

           The L2VPN Working Group (email distribution l2vpn@ietf.org,
           http://www.ietf.org/html.charters/l2vpn-charter.html)
           "
        

      DESCRIPTION
          "Copyright (C) The IETF Trust (2010). The initial
           version of this MIB module was published in RFC XXXX.

   -- RFC Editor: Please replace XXXX with RFC number & remove
   --                    this note.

           For full legal notices see the RFC itself or see:
           http://www.ietf.org/copyrights/ianamib.html

           This MIB module contains managed object definitions for
           LDP signalled Virtual Private LAN Services as in
           [RFC4762]

           This MIB module enables the use of any underlying PseudoWire
           network. "

      -- Revision history.

      REVISION
          "200608301200Z"  -- 30 Aug 2006 12:00:00 GMT
      DESCRIPTION "Initial version published as part of RFC YYYY."
   -- RFC Editor: please replace YYYY with IANA assigned value, and
   -- delete this note.

         ::= { jnxExperiment 9}

   -- Top-level components of this MIB.


   -- Notifications
   jnxVplsLdpNotifications OBJECT IDENTIFIER
                                 ::= { jnxVplsLdpDraft01MIB 0 }

   -- Tables, Scalars
   jnxVplsLdpObjects       OBJECT IDENTIFIER
                                 ::= { jnxVplsLdpDraft01MIB 1 }
   -- Conformance
   jnxVplsLdpConformance   OBJECT IDENTIFIER
                                 ::= { jnxVplsLdpDraft01MIB 2 }

   jnxVplsLdpConfigTable OBJECT-TYPE
          SYNTAX          SEQUENCE OF JnxVplsLdpConfigEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
               "This table specifies information for configuring
                and monitoring LDP specific parameters for
                Virtual Private Lan Services(VPLS)."
          ::= { jnxVplsLdpObjects 1 }

   jnxVplsLdpConfigEntry OBJECT-TYPE
          SYNTAX          JnxVplsLdpConfigEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
           "A row in this table represents LDP specific information
            for Virtual Private Lan Service(VPLS) in a packet network.
            It is indexed by jnxVplsConfigIndex, which uniquely
            identifies a single VPLS.

            A row is automatically created when a VPLS service is
            configured using LDP signalling.

            None of the read-create objects values can be
            changed when jnxVplsRowStatus is in the active(1)
            state. Changes are allowed when the jnxVplsRowStatus
            is in notInService(2) or notReady(3) states only.
            If the operator need to change one of the values
            for an active row the jnxVplsConfigRowStatus should be
            first changed to notInService(2), the objects may
            be changed now, and later to active(1) in order to
            re-initiate the signaling process with the new
            values in effect.
            "
          INDEX           { jnxVplsConfigIndex }
          ::= { jnxVplsLdpConfigTable 1 }

     JnxVplsLdpConfigEntry ::=
        SEQUENCE {
         jnxVplsLdpConfigMacAddrWithdraw                   TruthValue
          }

      jnxVplsLdpConfigMacAddrWithdraw OBJECT-TYPE
          SYNTAX          TruthValue
          MAX-ACCESS      read-only
          STATUS          current
          DESCRIPTION
               "This object specifies if MAC address withdrawal
                is enabled in this service. If this object is true then
                Mac address withdrawl Learning is enabled. If false,
                then Mac Learning is disabled."
          DEFVAL          { true }
          ::= { jnxVplsLdpConfigEntry 1 }

      -- VPLS LDP PW Binding Table

      jnxVplsLdpPwBindTable OBJECT-TYPE
          SYNTAX          SEQUENCE OF JnxVplsLdpPwBindEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
               "This table provides LDP specific information for
                an association between a VPLS service and the
                corresponding Pseudo Wires. A service can have more
                than one Pseudo Wire association. Pseudo Wires are
                defined in the pwTable."
          ::= { jnxVplsLdpObjects 2 }

      jnxVplsLdpPwBindEntry OBJECT-TYPE
          SYNTAX          JnxVplsLdpPwBindEntry
          MAX-ACCESS      not-accessible
          STATUS          current
          DESCRIPTION
               "Each row represents an association between a
                VPLS instance and one or more Pseudo Wires
                defined in the pwTable. Each index is unique
                in describing an entry in this table. However
                both indexes are required to define the one
                to many association of service to pseudowire.

                An entry in this table in instantiated only when
                LDP signalling is used to configure VPLS service.

                Each entry in this table provides LDP specific
                information for the VPlS represented by 


                jnxVplsConfigIndex."
          INDEX  { jnxVplsConfigIndex, jnxVplsPwBindIndex }
          ::= { jnxVplsLdpPwBindTable 1 }

      JnxVplsLdpPwBindEntry ::=
          SEQUENCE {
              jnxVplsLdpPwBindMacAddressLimit       Unsigned32
          }

      jnxVplsLdpPwBindMacAddressLimit OBJECT-TYPE
          SYNTAX          Unsigned32 (0.. 4294967295)
          MAX-ACCESS      read-only
          STATUS          current
          DESCRIPTION
               "The value of this object specifies the maximum number
                of learned and static entries allowed in the
                Forwarding database for this PW Binding. The value 0
                means there is no limit for this PW Binding."
          DEFVAL          { 0 }
          ::= { jnxVplsLdpPwBindEntry 1 }

      -- VPLS Ldp Service Notifications

      jnxVplsLdpPwBindMacTableFull NOTIFICATION-TYPE
          OBJECTS {
              jnxVplsConfigIndex, 
              jnxVplsPwBindIndex
          }
          STATUS          current
          DESCRIPTION
               "The jnxVplsLdpPwBindMacTableFull notification is generated
                when the number of learned MAC-Addresses increases to 
                the value specified in jnxVplsLdpPwBindMacAddressLimit."
          ::= { jnxVplsLdpNotifications 1 }

     END