mibs/moxa/MOXA-EDSP510A8POE-MIB
-- *****************************************************************
-- Moxa EtherDevice Switch EDSP510A_8POE MIB
--
-- Copyright (c) 2011 by Moxa Inc.
-- All rights reserved.
-- *****************************************************************
MOXA-EDSP510A8POE-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress, OBJECT-TYPE
FROM SNMPv2-SMI
DateAndTime, TEXTUAL-CONVENTION, MacAddress, DisplayString
FROM SNMPv2-TC;
moxa OBJECT IDENTIFIER ::= { enterprises 8691 } -- 1.3.6.1.4.1.8691
industrialEthernet OBJECT IDENTIFIER ::= { moxa 7 } -- 1.3.6.1.4.1.8691.7
edsp510a8poe MODULE-IDENTITY
LAST-UPDATED "201701160000Z"
ORGANIZATION "Moxa Inc."
CONTACT-INFO
"Postal: Moxa Inc.
Fl.4, No.135,Lane 235,Pao-Chiao Rd.
Shing Tien City,Taipei,Taiwan,R.O.C
Tel: +866-2-89191230 "
DESCRIPTION
"The MIB module for Moxa EDSP510A-8PoE series specific information."
REVISION "201701160000Z"
DESCRIPTION
"Remove objects:
igmpSnoopingMulticastGroupTable,
igmpSnoopingMulticastGroupEntry,
igmpSnoopingIpGroup,
igmpSnoopingMacGroup,
igmpSnoopingJoinedPorts,
enhancedMode
Fix TYPO"
REVISION "201506300000Z"
DESCRIPTION
"Support v3.5 firmware,
Added new objects:
multicastFastForwarding,
Modified objects:
n/a"
REVISION "201301080000Z"
DESCRIPTION
"Support TurboPack2 v3.3 firmware,
Added new objects:
timeProtocolOption,
loopProtection,
calibratePeriod,
monitorSFPTable,
eventlog,
Modified objects:
Vlan,
enableModbusTCP,
enableWarmStart,
mibNotificationsPrefix,
dhcpRelayAgentSetting"
REVISION "201212190000Z"
DESCRIPTION
"Support TurboPack2 v3.1 firmware,
Added new objects:
spanningTreePortEdge,
enableEtherNetIP,
enableModbus,
enableNTPServer,
userLoginSetting,
cpuLoading5s,
cpuLoading30s,
cpuLoading300s,
totalMemory,
freeMemory,
usedMemory,
memoryUsage,
Modified objects:
Vlan,
commRedundancy,
rateLimiting,
ieee1588Setting"
::= { industrialEthernet 86 } -- 1.3.6.1.4.1.8691.7.86
-- -------------------------------------------------------------
-- groups in the MOXA-EDSP510 MIB
-- -------------------------------------------------------------
mibNotificationsPrefix OBJECT IDENTIFIER
::= { edsp510a8poe 0 }
swMgmt OBJECT IDENTIFIER ::= { edsp510a8poe 1 } -- 1.3.6.1.4.1.8691.7.86.1
swTraps OBJECT IDENTIFIER ::= { edsp510a8poe 2 } -- 1.3.6.1.4.1.8691.7.86.2
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
-- -------------------------------------------------------------
-- swMgmt group
-- -------------------------------------------------------------
numberOfPorts OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Ports."
::= { swMgmt 1 }
switchModel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch model."
::= { swMgmt 2 }
firmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware version."
::= { swMgmt 4 }
enableWebConfig OBJECT-TYPE
SYNTAX INTEGER { disable(0), httpOrHttps(1), httpsOnly(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the Web. configuration function."
::= { swMgmt 5 }
consoleLoginMode OBJECT-TYPE
SYNTAX INTEGER { menu(0), cli(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This option can change console login mode."
::= { swMgmt 51 }
enableTelnetConsole OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable telnet console."
::= { swMgmt 6 }
lineSwapRecovery OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable line-swap-fast-recovery function."
::= { swMgmt 7 }
webTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Web Timeout"
::= { swMgmt 43 }
ageTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Web Timeout"
::= { swMgmt 44 }
-- -------------------------------------------------------------
-- network settings
-- -------------------------------------------------------------
networkSetting OBJECT IDENTIFIER ::= { swMgmt 8 }
switchIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of this switch."
::= { networkSetting 1 }
switchIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netmask of this switch."
::= { networkSetting 2 }
defaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default gateway of this switch."
::= { networkSetting 3 }
enableAutoIpConfig OBJECT-TYPE
SYNTAX INTEGER { disable(0), enableDHCP(1),enableBOOTP(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the automatic IP address configuration function."
::= { networkSetting 4 }
dnsServer1IpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first DNS server's IP address"
::= { networkSetting 5 }
snmpTrapCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP trap community name"
::= { networkSetting 6 }
trapServerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address/Domain name of SNMP trap server"
::= { networkSetting 7 }
dnsServer2IpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second DNS server's IP address"
::= { networkSetting 8 }
snmpReadCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP read community name"
::= { networkSetting 9 }
snmpTrap2Community OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Second SNMP trap community name"
::= { networkSetting 11 }
trap2ServerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address/Domain name of Second SNMP trap server"
::= { networkSetting 12 }
snmpInformEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the snmpInform function."
::= { networkSetting 13 }
snmpInformRetries OBJECT-TYPE
SYNTAX INTEGER (1..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snmp inform retry times of SNMP trap server"
::= { networkSetting 14 }
snmpInformTimeout OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snmp inform interval of SNMP trap server"
::= { networkSetting 15 }
dhcpRetryPeriods OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DHCP retry periods."
::= { networkSetting 16 }
dhcpRetryTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp retry times."
::= { networkSetting 17 }
-- -------------------------------------------------------------
-- port settings
-- -------------------------------------------------------------
portSetting OBJECT IDENTIFIER ::= { swMgmt 9 }
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table."
::= { portSetting 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port entry."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::=
SEQUENCE {
portIndex
INTEGER,
portDesc
DisplayString,
portEnable
INTEGER,
portSpeed
INTEGER,
portMDI
INTEGER,
portFDXFlowCtrl
INTEGER,
portName
DisplayString
}
portIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portEntry 1 }
portDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description"
::= { portEntry 2 }
portEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the port."
::= { portEntry 3 }
portSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
speed100M-Full(1),
speed100M-Half(2),
speed10M-Full(3),
speed10M-Half(4),
speed1000M-Full(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port speed and duplex."
::= { portEntry 4 }
portMDI OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
auto(1),
mdi(2),
mdiX(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port MDI/MDIX."
::= { portEntry 5 }
portFDXFlowCtrl OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port FDX Flow Control"
::= { portEntry 6 }
portName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port Name"
::= { portEntry 7 }
-- -------------------------------------------------------------
-- monitor
-- -------------------------------------------------------------
monitor OBJECT IDENTIFIER ::= { swMgmt 10 }
power1InputStatus OBJECT-TYPE
SYNTAX INTEGER { not-present(0), present(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the first power input."
::= { monitor 1 }
power2InputStatus OBJECT-TYPE
SYNTAX INTEGER { not-present(0), present(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the second power input."
::= { monitor 2 }
monitorPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table of monitor function."
::= { monitor 3 }
monitorPortEntry OBJECT-TYPE
SYNTAX MonitorPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table entry of monitor function."
INDEX { portIndex }
::= { monitorPortTable 1 }
MonitorPortEntry ::=
SEQUENCE {
monitorLinkStatus
INTEGER,
monitorSpeed
INTEGER,
monitorAutoMDI
INTEGER,
monitorTraffic
INTEGER,
monitorFDXFlowCtrl
INTEGER,
monitorTxTraffic
INTEGER,
monitorRxTraffic
INTEGER
}
monitorLinkStatus OBJECT-TYPE
SYNTAX INTEGER { disable(-1), off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port link status."
::= { monitorPortEntry 2}
monitorSpeed OBJECT-TYPE
SYNTAX INTEGER
{
speed1000M-Full(5),
speed1000M-Half(4),
speed100M-Full(3),
speed100M-Half(2),
speed10M-Full(1),
speed10M-Half(0),
na(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port speed and duplex status."
::= { monitorPortEntry 3 }
monitorAutoMDI OBJECT-TYPE
SYNTAX INTEGER
{
mdiX(1),
mdi(0),
na(-1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port MDI/MDIX status."
::= { monitorPortEntry 4 }
monitorTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic loading percentage of port."
::= { monitorPortEntry 5 }
monitorFDXFlowCtrl OBJECT-TYPE
SYNTAX INTEGER { off(0),on(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Full-Duplex flow control status"
::= { monitorPortEntry 6 }
monitorTxTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TX traffic loading percentage of port."
::= { monitorPortEntry 7 }
monitorRxTraffic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RTX traffic loading percentage of port."
::= { monitorPortEntry 8 }
monitorDiTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table of monitor function."
::= { monitor 4 }
monitorDiEntry OBJECT-TYPE
SYNTAX MonitorDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table entry of monitor function."
INDEX { diIndex }
::= { monitorDiTable 1 }
MonitorDiEntry ::=
SEQUENCE {
diIndex
INTEGER,
diInputStatus
INTEGER
}
diIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DI index of monitor function"
::= { monitorDiEntry 1 }
diInputStatus OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DI input status."
::= { monitorDiEntry 2 }
-- -------------------------------------------------------------
-- Monitor SFP Informations
-- Add by Steven SC Yen 2013-01-17
-- -------------------------------------------------------------
monitorSFPTable OBJECT-TYPE
SYNTAX SEQUENCE OF MonitorSFPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SFP table of monitor function."
::= { monitor 7 }
monitorSFPEntry OBJECT-TYPE
SYNTAX MonitorSFPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SFP table entry of monitor function."
INDEX { portIndex }
::= { monitorSFPTable 1 }
MonitorSFPEntry ::=
SEQUENCE {
sfpPort
DisplayString,
sfpModelName
DisplayString,
sfpTemperature
DisplayString,
sfpVoltage
DisplayString,
sfpTxPower
DisplayString,
sfpRXPower
DisplayString
}
sfpPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF index of monitor function"
::= { monitorSFPEntry 1 }
sfpModelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF ModelName of monitor function"
::= { monitorSFPEntry 2 }
sfpTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF Temperature of monitor function"
::= { monitorSFPEntry 3 }
sfpVoltage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF Voltage of monitor function"
::= { monitorSFPEntry 4 }
sfpTxPower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF TX power of monitor function"
::= { monitorSFPEntry 5 }
sfpRXPower OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF RX power of monitor function"
::= { monitorSFPEntry 6 }
-- -------------------------------------------------------------
-- email warning
-- -------------------------------------------------------------
emailWarning OBJECT IDENTIFIER ::= { swMgmt 11 }
emailService OBJECT IDENTIFIER ::= { emailWarning 1 }
emailWarningMailServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The email server's Ip Address/Domain name of email warning function."
::= { emailService 1 }
emailWarningSMTPPort OBJECT-TYPE
SYNTAX INTEGER (1..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The email server's SMTP port of email warning function."
::= { emailService 6 }
emailWarningFirstEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first email address of email warning function."
::= { emailService 2 }
emailWarningSecondEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second email address of email warning function."
::= { emailService 3 }
emailWarningThirdEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The third email address of email warning function."
::= { emailService 4 }
emailWarningFourthEmailAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fourth email address of email warning function."
::= { emailService 5 }
emailWarningEventType OBJECT IDENTIFIER ::= { emailWarning 2 }
emailWarningEventServerColdStart OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch cold start event of email warning function."
::= { emailWarningEventType 1 }
emailWarningEventServerWarmStart OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch warm start event of email warning function."
::= { emailWarningEventType 2 }
emailWarningEventConfigChange OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration changed event of email warning function."
::= { emailWarningEventType 3 }
emailWarningEventPowerOn2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power on event of email warning function."
::= { emailWarningEventType 4 }
emailWarningEventPowerOff2On OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power off event of email warning function."
::= { emailWarningEventType 5 }
emailWarningEventAuthFail OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The authentication fail event of email warning function."
::= { emailWarningEventType 6 }
emailWarningEventTopologyChanged OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The communication redundancy topology changed event of email warning function."
::= { emailWarningEventType 7 }
emailWarningEventPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmailWarningEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table of the email warning event."
::= { emailWarning 3 }
emailWarningEventPortEntry OBJECT-TYPE
SYNTAX EmailWarningEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port table entry of the email warning event."
INDEX { portIndex }
::= { emailWarningEventPortTable 1 }
EmailWarningEventPortEntry ::=
SEQUENCE {
emailWarningEventPortLinkOn
INTEGER,
emailWarningEventPortLinkOff
INTEGER,
emailWarningEventPortTrafficOverload
INTEGER,
emailWarningEventPortRxTrafficThreshold
INTEGER,
emailWarningEventPortTrafficDuration
INTEGER
}
emailWarningEventPortLinkOn OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port link on event of email warning function."
::= { emailWarningEventPortEntry 2 }
emailWarningEventPortLinkOff OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port link off event of email warning function."
::= { emailWarningEventPortEntry 3 }
emailWarningEventPortTrafficOverload OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic overloading event of email warning function."
::= { emailWarningEventPortEntry 4 }
emailWarningEventPortRxTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic threshold of the overloading event."
::= { emailWarningEventPortEntry 5 }
emailWarningEventPortTrafficDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port's traffic duration of the overloading event."
::= { emailWarningEventPortEntry 6 }
emailWarningEventDiTable OBJECT-TYPE
SYNTAX SEQUENCE OF EmailWarningEventDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table of the email warning event."
::= { emailWarning 4 }
emailWarningEventDiEntry OBJECT-TYPE
SYNTAX EmailWarningEventDiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DI table entry of the email warning event."
INDEX { diIndex }
::= { emailWarningEventDiTable 1 }
EmailWarningEventDiEntry ::=
SEQUENCE {
emailWarningEventDiInputOn2Off
INTEGER,
emailWarningEventDiInputOff2On
INTEGER
}
emailWarningEventDiInputOn2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DI input off event of email warning function ."
::= { emailWarningEventDiEntry 1 }
emailWarningEventDiInputOff2On OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DI input on event of email warning function."
::= { emailWarningEventDiEntry 2 }
-- -------------------------------------------------------------
-- set device ip
-- -------------------------------------------------------------
setDeviceIp OBJECT IDENTIFIER ::= { swMgmt 12 }
setDevIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SetDevIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set device IP table."
::= { setDeviceIp 1 }
setDevIpEntry OBJECT-TYPE
SYNTAX SetDevIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set device IP table entry."
INDEX { setDevIpIndex }
::= { setDevIpTable 1 }
SetDevIpEntry ::=
SEQUENCE {
setDevIpIndex
INTEGER,
setDevIpCurrentIpofDevice
DisplayString,
setDevIpPresentBy
INTEGER,
setDevIpDedicatedIp
IpAddress
}
setDevIpIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set device IP index."
::= { setDevIpEntry 1 }
setDevIpCurrentIpofDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current IP address of connected to this port."
::= { setDevIpEntry 2 }
setDevIpPresentBy OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
dhcpClient(1),
rarp(2),
bootp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used that assigning IP to the device."
::= { setDevIpEntry 3 }
setDevIpDedicatedIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address when assign to the device connected to this port."
::= { setDevIpEntry 4 }
-- -------------------------------------------------------------
-- port mirror
-- -------------------------------------------------------------
mirroring OBJECT IDENTIFIER ::= { swMgmt 13 }
targetPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mirrored port of mirroring function."
::= { mirroring 1 }
mirroringPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mirroring port of mirroring function."
::= { mirroring 2 }
monitorDirection OBJECT-TYPE
SYNTAX INTEGER
{
inputDataStream(0),
outputDataStream(1),
biDirectional(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The traffic direction of mirroring function."
::= { mirroring 3 }
-- -------------------------------------------------------------
-- port trunking
-- -------------------------------------------------------------
portTrunking OBJECT IDENTIFIER ::= { swMgmt 14 }
-- trunk setting table
trunkSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Setting Table."
::= { portTrunking 1 }
trunkSettingEntry OBJECT-TYPE
SYNTAX TrunkSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Setting Entry."
INDEX { trunkSettingIndex }
::= { trunkSettingTable 1 }
TrunkSettingEntry ::=
SEQUENCE {
trunkSettingIndex
INTEGER,
trunkType
INTEGER,
trunkMemberPorts
PortList
}
trunkSettingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Index."
::= { trunkSettingEntry 1 }
trunkType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunking Group Type."
::= { trunkSettingEntry 2 }
trunkMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunking Group Member Ports."
::= { trunkSettingEntry 3 }
-- trunk table
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Table."
::= { portTrunking 2 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Trunking Entry."
INDEX { trunkIndex, trunkPort }
::= { trunkTable 1 }
TrunkEntry ::=
SEQUENCE {
trunkIndex
INTEGER,
trunkPort
INTEGER,
trunkStatus
INTEGER
}
trunkIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Index."
::= { trunkEntry 1 }
trunkPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Group Member Port."
::= { trunkEntry 2 }
trunkStatus OBJECT-TYPE
SYNTAX INTEGER {
success(1),
fail(2),
standby(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunking Port Status."
::= { trunkEntry 3 }
-- -------------------------------------------------------------
-- communication redundancy
-- -------------------------------------------------------------
commRedundancy OBJECT IDENTIFIER ::= { swMgmt 16 }
protocolOfRedundancySetup OBJECT-TYPE
SYNTAX INTEGER { spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This set the redundancy protocol of this switch. "
::= { commRedundancy 1 }
turboRing OBJECT IDENTIFIER ::= { commRedundancy 2}
turboRingMaster OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRing 1 }
turboRingMasterSetup OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRing 2 }
turboRingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TurboRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Turbo Ring Port Table."
::= { turboRing 3 }
turboRingPortEntry OBJECT-TYPE
SYNTAX TurboRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Turbo Ring Port Entry."
INDEX { turboRingPortIndex }
::= { turboRingPortTable 1 }
TurboRingPortEntry ::=
SEQUENCE {
turboRingPortIndex
INTEGER,
turboRingPortStatus
INTEGER,
turboRingPortDesignatedBridge
OCTET STRING,
turboRingPortDesignatedPort
INTEGER
}
turboRingPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring Port Index."
::= { turboRingPortEntry 1 }
turboRingPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notTurboRingPort(1),
linkDown(2),
blocked(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring Port Status."
::= { turboRingPortEntry 2 }
turboRingPortDesignatedBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
::= { turboRingPortEntry 3 }
turboRingPortDesignatedPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the port on the Designated
Bridge for this port's segment."
::= { turboRingPortEntry 4 }
turboRingDesignatedMaster OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which is the Master of the TURBO RING."
::= { turboRing 6 }
turboRingRdntPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the TURBO RING."
::= { turboRing 7 }
turboRingRdntPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the TURBO RING."
::= { turboRing 8 }
turboRingEnableCoupling OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the ring coupling function."
::= { turboRing 9 }
turboRingCouplingPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The coupling port of ring coupling function."
::= { turboRing 10 }
turboRingCouplingPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notCouplingPort(1),
linkDown(2),
blocked(3),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The coupling port status of ring coupling function."
::= { turboRing 11 }
turboRingControlPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control port of ring coupling function."
::= { turboRing 12 }
turboRingControlPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notControlPort(1),
linkDown(2),
blocked(3),
forwarding(5),
inactive(6),
active(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The control port status of ring coupling function."
::= { turboRing 13 }
turboRingBrokenStatus OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Ring broken display."
::= { turboRing 14 }
spanningTree OBJECT IDENTIFIER ::= { commRedundancy 3 }
spanningTreeRoot OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The root of spanning tree."
::= { spanningTree 1 }
spanningTreeBridgePriority OBJECT-TYPE
SYNTAX INTEGER {priority0(0), priority4096(4096), priority8192(8192), priority12288(12288),
priority16384(16384), priority20480(20480), priority24576(24576),
priority28672(28672), priority32768(32768), priority36864(36864),
priority40960(40960), priority45056(45056), priority49152(49152),
priority53248(53248), priority57344(57344), priority61440(61440)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bridge priority of spanning tree protocol."
::= { spanningTree 2 }
spanningTreeHelloTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hello time of spanning tree protocol."
::= { spanningTree 3 }
spanningTreeMaxAge OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max. age of spanning tree protocol."
::= { spanningTree 4 }
spanningTreeForwardingDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tje forwarding delay of spanning tree protocol."
::= { spanningTree 5 }
spanningTreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpanningTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree table."
::= { spanningTree 6 }
spanningTreeEntry OBJECT-TYPE
SYNTAX SpanningTreeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The spanning tree port entry."
INDEX { spanningTreeIndex }
::= { spanningTreeTable 1 }
SpanningTreeEntry ::=
SEQUENCE {
spanningTreeIndex
INTEGER,
enableSpanningTree
INTEGER,
spanningTreePortPriority
INTEGER,
spanningTreePortCost
INTEGER,
spanningTreePortStatus
INTEGER,
spanningTreePortEdge
INTEGER
}
spanningTreeIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of spanning tree table."
::= { spanningTreeEntry 1 }
enableSpanningTree OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable of spanning tree protocol for this port."
::= { spanningTreeEntry 2 }
spanningTreePortPriority OBJECT-TYPE
SYNTAX INTEGER {priority0(0), priority16(16), priority32(32), priority48(48),
priority64(64), priority80(80), priority96(96), priority112(112),
priority128(128), priority144(144), priority160(160), priority176(176),
priority192(192), priority208(208), priority224(224), priority240(240)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port priority of spanning tree protocol."
::= { spanningTreeEntry 3 }
spanningTreePortCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port cost of spanning tree protocol."
::= { spanningTreeEntry 4 }
spanningTreePortStatus OBJECT-TYPE
SYNTAX INTEGER
{
portDisabled(0),
notSpanningTreePort(1),
linkDown(2),
blocked(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port status of spanning tree protocol."
::= { spanningTreeEntry 5 }
spanningTreePortEdge OBJECT-TYPE
SYNTAX INTEGER { auto(0), forceEdge(1), false(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configures the Edge Port property for this port."
::= { spanningTreeEntry 6 }
activeProtocolOfRedundancy OBJECT-TYPE
SYNTAX INTEGER { none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This shows the active redundancy protocol of this switch now. The none(0) status will
be showed if only if the switch's redundancy protocol is set to spanning tree and none of
ports enable spanning tree."
::= { commRedundancy 4 }
turboRingV2 OBJECT IDENTIFIER ::= { commRedundancy 5}
turboRingV2Ring1 OBJECT IDENTIFIER ::= { turboRingV2 1 }
ringIndexRing1 OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The turboRingV2 Ring Index."
::= { turboRingV2Ring1 1 }
ringEnableRing1 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The turboRingV2 Ring1 enable config."
::= { turboRingV2Ring1 2 }
masterSetupRing1 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRingV2Ring1 3 }
masterStatusRing1 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRingV2Ring1 4 }
designatedMasterRing1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which is the Master of the turboRingV2."
::= { turboRingV2Ring1 5 }
rdnt1stPortRing1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 6 }
rdnt1stPortStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 7 }
rdnt2ndPortRing1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 8 }
rdnt2ndPortStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring1 9 }
brokenStatusRing1 OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"turboRingV2 broken display."
::= { turboRingV2Ring1 10 }
turboRingV2Ring2 OBJECT IDENTIFIER ::= { turboRingV2 2 }
ringIndexRing2 OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The turboRingV2 Ring Index."
::= { turboRingV2Ring2 1 }
ringEnableRing2 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The turboRingV2 Ring2 enable config."
::= { turboRingV2Ring2 2 }
masterSetupRing2 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Is this a Master or Slave."
::= { turboRingV2Ring2 3 }
masterStatusRing2 OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set this to be Master."
::= { turboRingV2Ring2 4 }
designatedMasterRing2 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the bridge which is the Master of the turboRingV2."
::= { turboRingV2Ring2 5 }
rdnt1stPortRing2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 6 }
rdnt1stPortStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 1st Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 7 }
rdnt2ndPortRing2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 8 }
rdnt2ndPortStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 2nd Redundant Port on the turboRingV2."
::= { turboRingV2Ring2 9 }
brokenStatusRing2 OBJECT-TYPE
SYNTAX INTEGER
{
na(0),
normal(1),
broken(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"turboRingV2 broken display."
::= { turboRingV2Ring2 10 }
turboRingV2Coupling OBJECT IDENTIFIER ::= { turboRingV2 3 }
couplingEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the ring coupling enable."
::= { turboRingV2Coupling 1 }
couplingMode OBJECT-TYPE
SYNTAX INTEGER { dualHoming(1), couplingBackup(2), couplingPrimary(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the ring coupling mode."
::= { turboRingV2Coupling 2 }
coupling1stPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If in 'DUAL HOMING' mode, port name is 'Primary port'; if in 'COUPLING' mode, port name is 'Coupling port'"
::= { turboRingV2Coupling 3 }
coupling1stPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1st coupling port status of coupling function."
::= { turboRingV2Coupling 4 }
coupling2ndPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If in 'DUAL HOMING' mode, port name is 'Backup port'; if in 'COUPLING' mode, port name is no used."
::= { turboRingV2Coupling 5 }
coupling2ndPortStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
notRedundant(1),
linkdown(2),
blocking(3),
learning(4),
forwarding(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 2nd coupling port status of coupling function."
::= { turboRingV2Coupling 6 }
turboChain OBJECT IDENTIFIER ::= { commRedundancy 6}
turboChainRole OBJECT-TYPE
SYNTAX INTEGER
{
head(1),
member(2),
tail(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Role of TURBO CHAIN."
::= { turboChain 1 }
turboChainPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 1st Redundant Port on the TURBO CHAIN.
If switch role is Turbo Chain Head, this is Head port,
If Switch role is Turbo Chain Tail, this is Tail port."
::= { turboChain 2 }
turboChainPort2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number of 2nd Redundant Port on the TURBO CHAIN.
It is the member port of TurboChain"
::= { turboChain 3 }
turboChainPort1Status OBJECT-TYPE
SYNTAX INTEGER
{
notTurboChainPort(0),
linkDown(1),
blocking(2),
blocked(3),
forwarding(4),
na(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Chain Port Status."
::= { turboChain 4 }
turboChainPort2Status OBJECT-TYPE
SYNTAX INTEGER
{
notTurboChainPort(0),
linkDown(1),
blocking(2),
blocked(3),
forwarding(4),
na(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turbo Chain Port Status."
::= { turboChain 5 }
turboChainPort1PartnerBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the next bridge "
::= { turboChain 6 }
turboChainPort2PartnerBridge OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the neighbor Turbo Chain switch"
::= { turboChain 7 }
-- -------------------------------------------------------------
-- relay warning
-- -------------------------------------------------------------
relayWarning OBJECT IDENTIFIER ::= { swMgmt 17 }
relayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF RelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning table."
::= { relayWarning 11 }
relayWarningEntry OBJECT-TYPE
SYNTAX RelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Relay Warning Entry."
INDEX { relayAlarmIndex }
::= { relayWarningTable 1 }
RelayWarningEntry ::=
SEQUENCE {
relayAlarmIndex
INTEGER,
relayWarningRelayContact
INTEGER,
overrideRelayWarningSetting
INTEGER,
relayWarningPower1Off
INTEGER,
relayWarningPower1OffStatus
INTEGER,
relayWarningPower2Off
INTEGER,
relayWarningPower2OffStatus
INTEGER,
relayWarningTurboRingBreak
INTEGER,
relayWarningTurboRingBreakStatus
INTEGER
}
relayAlarmIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Relay alarm index."
::= { relayWarningEntry 1 }
relayWarningRelayContact OBJECT-TYPE
SYNTAX INTEGER {closed(0) ,opened(1)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first Relay contact status."
::= { relayWarningEntry 2 }
overrideRelayWarningSetting OBJECT-TYPE
SYNTAX INTEGER { no(0), yes(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Override the relay warning setting."
::= { relayWarningEntry 3 }
relayWarningPower1Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the first power input off."
::= { relayWarningEntry 4 }
relayWarningPower1OffStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the first power input off.."
::= { relayWarningEntry 5 }
relayWarningPower2Off OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the second power input off."
::= { relayWarningEntry 6 }
relayWarningPower2OffStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the second power input off."
::= { relayWarningEntry 7 }
relayWarningTurboRingBreak OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while turbo ring break."
::= { relayWarningEntry 8 }
relayWarningTurboRingBreakStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened while turbo ring is broken."
::= { relayWarningEntry 9 }
portRelayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning port table."
::= { relayWarning 12 }
portRelayWarningEntry OBJECT-TYPE
SYNTAX PortRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Relay Warning Entry."
INDEX { portIndex,relayAlarmIndex }
::= { portRelayWarningTable 1 }
PortRelayWarningEntry ::=
SEQUENCE {
relayWarningLinkChanged
INTEGER,
relayWarningLinkChangedStatus
INTEGER,
relayWarningTrafficOverload
INTEGER,
relayWarningTrafficOverloadStatus
INTEGER,
relayWarningRxTrafficThreshold
INTEGER,
relayWarningTrafficDuration
INTEGER
}
relayWarningLinkChanged OBJECT-TYPE
SYNTAX INTEGER { ignore(0), on2off(1), off2on(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while this port's link status is changed."
::= { portRelayWarningEntry 1 }
relayWarningLinkChangedStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as this port's link status is changed."
::= { portRelayWarningEntry 2 }
relayWarningTrafficOverload OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while this port's traffic is overload."
::= { portRelayWarningEntry 3 }
relayWarningTrafficOverloadStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as this port's traffic is overload."
::= { portRelayWarningEntry 4 }
relayWarningRxTrafficThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of the port traffic will be over loading."
::= { portRelayWarningEntry 5 }
relayWarningTrafficDuration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The duration of the port traffic will be over loading."
::= { portRelayWarningEntry 6 }
diRelayWarningTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The relay warning DI table."
::= { relayWarning 13 }
diRelayWarningEntry OBJECT-TYPE
SYNTAX DiRelayWarningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DI Relay Warning Entry."
INDEX { diIndex,relayAlarmIndex }
::= { diRelayWarningTable 1 }
DiRelayWarningEntry ::=
SEQUENCE {
relayWarningDiInputChanged
INTEGER,
relayWarningDiInputChangedStatus
INTEGER
}
relayWarningDiInputChanged OBJECT-TYPE
SYNTAX INTEGER { disable(0), off(1), on(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The relay contact will be opened while the DI input changed."
::= { diRelayWarningEntry 1 }
relayWarningDiInputChangedStatus OBJECT-TYPE
SYNTAX INTEGER { not-triggered(0), triggered(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relay contact is opened as the first DI input changed.."
::= { diRelayWarningEntry 2 }
-- -------------------------------------------------------------
-- traffic prioritization
-- -------------------------------------------------------------
trafficPrioritization OBJECT IDENTIFIER ::= { swMgmt 18 }
qosClassification OBJECT IDENTIFIER ::= { trafficPrioritization 1 }
queuingMechanism OBJECT-TYPE
SYNTAX INTEGER {schedweightfair(0),schedstrict(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queuing mechanism."
::= { qosClassification 1 }
qosPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The QoS port table."
::= { qosClassification 2 }
qosPortEntry OBJECT-TYPE
SYNTAX QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The QoS Port Entry."
INDEX { portIndex }
::= { qosPortTable 1 }
QosPortEntry ::=
SEQUENCE {
inspectTos
INTEGER,
inspectCos
INTEGER,
portPriority
INTEGER
}
inspectTos OBJECT-TYPE
SYNTAX INTEGER {no (0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the inspection of TOS field."
::= { qosPortEntry 1 }
inspectCos OBJECT-TYPE
SYNTAX INTEGER {no (0),yes(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the inspection of CoS field."
::= { qosPortEntry 2 }
portPriority OBJECT-TYPE
SYNTAX INTEGER {priority0(0), priority1(1), priority2(2), priority3(3),
priority4(4), priority5(5), priority6(6), priority7(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default priority of the port."
::= { qosPortEntry 3 }
cosMapping OBJECT IDENTIFIER ::= { trafficPrioritization 2 }
cosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The COS mapping table."
::= { cosMapping 1 }
cosMappingEntry OBJECT-TYPE
SYNTAX CosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The COS mapping Entry."
INDEX { cosTag}
::= { cosMappingTable 1 }
CosMappingEntry ::=
SEQUENCE {
cosTag
INTEGER,
cosMappedPriority
INTEGER
}
cosTag OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cos tag of TOS field."
::= { cosMappingEntry 1 }
cosMappedPriority OBJECT-TYPE
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame's priority corresponding to it's COS tag value."
::= { cosMappingEntry 2 }
tosMapping OBJECT IDENTIFIER ::= { trafficPrioritization 3 }
tosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF TosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TOS mapping table."
::= { tosMapping 1 }
tosMappingEntry OBJECT-TYPE
SYNTAX TosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TOS mapping Entry."
INDEX { tosClass }
::= { tosMappingTable 1 }
TosMappingEntry ::=
SEQUENCE {
tosClass
INTEGER,
tosMappedPriority
INTEGER
}
tosClass OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TOS class of TOS field."
::= { tosMappingEntry 1 }
tosMappedPriority OBJECT-TYPE
SYNTAX INTEGER {low(0),normal(1),medium(2),high(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame's priority corresponding to it's TOS class value."
::= { tosMappingEntry 2 }
-- -------------------------------------------------------------
-- vlan
-- -------------------------------------------------------------
vlan OBJECT IDENTIFIER ::= { swMgmt 19 }
vlanPortSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vlan setting table of ports."
::= { vlan 1 }
vlanPortSettingEntry OBJECT-TYPE
SYNTAX VlanPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Setting Entry of VLAN."
INDEX { portIndex }
::= { vlanPortSettingTable 1 }
VlanPortSettingEntry ::=
SEQUENCE {
portVlanType
INTEGER,
portDefaultVid
INTEGER,
portFixedVid
DisplayString,
portFixedVidUntag
DisplayString,
portForbiddenVid
DisplayString
}
portVlanType OBJECT-TYPE
SYNTAX INTEGER {access(0),trunk(1),hybrid(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan type of port."
::= { vlanPortSettingEntry 1 }
portDefaultVid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVID of port."
::= { vlanPortSettingEntry 2 }
portFixedVid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed vids of (trunk) port."
::= { vlanPortSettingEntry 3 }
portForbiddenVid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The forbidden vids of (trunk)port."
::= { vlanPortSettingEntry 4 }
portFixedVidUntag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed untag vids of (trunk) port."
::= { vlanPortSettingEntry 5 }
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN table."
::= { vlan 2 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN Entry."
INDEX { vlanId }
::= { vlanTable 1 }
VlanEntry ::=
SEQUENCE {
vlanId
INTEGER,
joinedAccessPorts
PortList,
joinedTrunkPorts
PortList,
joinedHybridPorts
PortList
}
vlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN id."
::= { vlanEntry 1 }
joinedAccessPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access ports that joined this VID."
::= { vlanEntry 2 }
joinedTrunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk ports that joined this VID."
::= { vlanEntry 3 }
joinedHybridPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hybrid ports that joined this VID."
::= { vlanEntry 4 }
managementVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The management VLAN id."
::= { vlan 3 }
vlanType OBJECT-TYPE
SYNTAX INTEGER {tagBased(0),portBased(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN Type."
::= { vlan 4 }
portbaseVlanSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortbaseVlanSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port base Vlan Setting Table."
::= { vlan 5 }
portbaseVlanSettingEntry OBJECT-TYPE
SYNTAX PortbaseVlanSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port base Vlan Setting Entry."
INDEX { portbaseVlanSettingIndex }
::= { portbaseVlanSettingTable 1 }
PortbaseVlanSettingEntry ::=
SEQUENCE {
portbaseVlanSettingIndex
INTEGER,
portbaseVlanMemberPorts
PortList
}
portbaseVlanSettingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port base Vlan Group Index."
::= { portbaseVlanSettingEntry 1 }
portbaseVlanMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port base Vlan Group Member Ports."
::= { portbaseVlanSettingEntry 2 }
enableGvrp OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable GVRP."
::= { vlan 6 }
-- -------------------------------------------------------------
-- multicast filtering
-- -------------------------------------------------------------
multicastFiltering OBJECT IDENTIFIER ::= { swMgmt 20 }
igmpSnooping OBJECT IDENTIFIER ::= { multicastFiltering 1 }
querierQueryInterval OBJECT-TYPE
SYNTAX INTEGER (20..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This query interval of the querier function for this VLAN."
::= { igmpSnooping 1 }
igmpSnoopingSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopingSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP snooping setting table."
::= { igmpSnooping 2 }
igmpSnoopingSettingEntry OBJECT-TYPE
SYNTAX IgmpSnoopingSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP snooping setting Entry."
INDEX { vlanId }
::= { igmpSnoopingSettingTable 1 }
IgmpSnoopingSettingEntry ::=
SEQUENCE {
enableIgmpSnooping
INTEGER,
enableQuerier
INTEGER,
fixedMulticastQuerierPorts
PortList,
learnedMulticastQuerierPorts
PortList
}
enableIgmpSnooping OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the IGMP snooping function in this VLAN."
::= { igmpSnoopingSettingEntry 1 }
enableQuerier OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the querier function for this VLAN."
::= { igmpSnoopingSettingEntry 2 }
fixedMulticastQuerierPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ports that multicast-Querier exist."
::= { igmpSnoopingSettingEntry 3 }
learnedMulticastQuerierPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that multicast-Querier exist."
::= { igmpSnoopingSettingEntry 4 }
enableGlobalIgmpSnooping OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the IGMP snooping function ."
::= { igmpSnooping 4 }
multicastFastForwarding OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This Enable Multicast Fast Forwarding Mode function ."
::= { igmpSnooping 7 }
staticMulticast OBJECT IDENTIFIER ::= { multicastFiltering 2 }
staticMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The static multicast table."
::= { staticMulticast 1 }
staticMulticastEntry OBJECT-TYPE
SYNTAX StaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static multicast Entry."
INDEX { staticMulticastAddress }
::= { staticMulticastTable 1 }
StaticMulticastEntry ::=
SEQUENCE {
staticMulticastAddress
MacAddress,
staticMulticastPorts
PortList,
staticMulticastStatus
INTEGER
}
staticMulticastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static multicast address."
::= { staticMulticastEntry 1 }
staticMulticastPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port map of the static multicast address."
::= { staticMulticastEntry 2 }
staticMulticastStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then active.
Use destroy to delete this row."
::= { staticMulticastEntry 3 }
--
-- GMRP
--
gmrp OBJECT IDENTIFIER ::= { multicastFiltering 3 }
-- gmrp setting table
gmrpSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF GmrpSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP setting table."
::= { gmrp 1 }
gmrpSettingEntry OBJECT-TYPE
SYNTAX GmrpSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP Setting Entry."
INDEX { portIndex }
::= { gmrpSettingTable 1 }
GmrpSettingEntry ::=
SEQUENCE {
enableGMRP
INTEGER
}
enableGMRP OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable GMRP."
::= { gmrpSettingEntry 1 }
-- gmrp status
gmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP status table."
::= { gmrp 2 }
gmrpEntry OBJECT-TYPE
SYNTAX GmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The GMRP Status Entry."
INDEX { gmrpMulticastGroup }
::= { gmrpTable 1 }
GmrpEntry ::=
SEQUENCE {
gmrpMulticastGroup
MacAddress,
gmrpFixedPorts
PortList,
gmrpLearnedPorts
PortList
}
gmrpMulticastGroup OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GMRP multicast group."
::= { gmrpEntry 1 }
gmrpFixedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that joined GMRP multicast group manually."
::= { gmrpEntry 2 }
gmrpLearnedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ports that joined GMRP multicast group by GMRP learning."
::= { gmrpEntry 3 }
-- -------------------------------------------------------------
-- rate limiting
-- -------------------------------------------------------------
rateLimiting OBJECT IDENTIFIER ::= { swMgmt 21 }
rateLimitingMode OBJECT-TYPE
SYNTAX INTEGER {normal(0),portDisable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limiting mode."
::= { rateLimiting 4 }
-- normalMode --
-- ingress --
normalModeRateLimitingIngressTable OBJECT-TYPE
SYNTAX SEQUENCE OF NormalModeRateLimitingIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rate limiting table."
::= { rateLimiting 1 }
normalModeRateLimitingIngressEntry OBJECT-TYPE
SYNTAX NormalModeRateLimitingIngressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rate limiting Entry."
INDEX { portIndex }
::= { normalModeRateLimitingIngressTable 1 }
NormalModeRateLimitingIngressEntry ::=
SEQUENCE {
limitMode
INTEGER,
lowPriLimitRate
INTEGER,
normalPriLimitRate
INTEGER,
mediumPriLimitRate
INTEGER,
highPriLimitRate
INTEGER,
egressLimit
INTEGER
}
limitMode OBJECT-TYPE
SYNTAX INTEGER {all(0),bmucast(1),bmcast(2),bcast(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limit mode."
::= { normalModeRateLimitingIngressEntry 1 }
lowPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
limit1M(4),limit2M(5),limit4M(6),limit8M(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of low priority queue."
::= { normalModeRateLimitingIngressEntry 2 }
normalPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
limit1M(4),limit2M(5),limit4M(6),limit8M(7),
limit16M(8)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of normal priority queue.
The values being equal to or double value of lowPriLimitRate are valid for set."
::= { normalModeRateLimitingIngressEntry 3 }
mediumPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
limit1M(4),limit2M(5),limit4M(6),limit8M(7),
limit16M(8),limit32M(9)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of medium priority queue.
The values being equal to or double value of normalPriLimitRate are valid for set."
::= { normalModeRateLimitingIngressEntry 4 }
highPriLimitRate OBJECT-TYPE
SYNTAX INTEGER {notlimit(0),limit128k(1),limit256k(2),limit512k(3),
limit1M(4),limit2M(5),limit4M(6),limit8M(7),
limit16M(8),limit32M(9),limit64M(10)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The limiting rate of high priority queue.
The values being equal to or double value of mediumPriLimitRate are valid for set."
::= { normalModeRateLimitingIngressEntry 5 }
egressLimit OBJECT-TYPE
SYNTAX INTEGER {notlimited(0), percentage03(1), percentage05(2), percentage10(3),
percentage15(4), percentage25(5), percentage35(6), percentage50(7),
percentage65(8), percentage85(9)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress limit mode."
::= { normalModeRateLimitingIngressEntry 6 }
-- portDisableMode --
portDisableMode OBJECT IDENTIFIER ::= { rateLimiting 3 }
portDisableModePeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Check time. "
::= {portDisableMode 1 }
portDisableModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortDisableModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rate limiting table."
::= { portDisableMode 2 }
portDisableModeEntry OBJECT-TYPE
SYNTAX PortDisableModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rate limiting Entry."
INDEX { portIndex }
::= { portDisableModeTable 1 }
PortDisableModeEntry ::=
SEQUENCE {
ingressLimit
INTEGER
}
ingressLimit OBJECT-TYPE
SYNTAX INTEGER {notlimited(0), rateMega1Fps4464(1), rateMega2Fps7441(2), rateMega3Fps14881(3),
rateMega4Fps22322(4), rateMega5Fps37203(5), rateMega6Fps52084(6), rateMega7Fps74405(7), rateGiga1Fps44640(8), rateGiga2Fps74410(9), rateGiga3Fps148810(10),
rateGiga4Fps223220(11), rateGiga5Fps372030(12), rateGiga6Fps520840(13), rateGiga7Fps744050(14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ingress limit mode."
::= { portDisableModeEntry 1 }
-- -------------------------------------------------------------
-- security
-- -------------------------------------------------------------
security OBJECT IDENTIFIER ::= { swMgmt 22 }
-- -------------------------------------------------------------
-- user login authentication
-- -------------------------------------------------------------
userLoginSetting OBJECT IDENTIFIER ::= { security 1 }
userLoginServer OBJECT-TYPE
SYNTAX INTEGER {
tacacs(1),
radius(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user login server option."
::= { userLoginSetting 1 }
tacacsServerSetting OBJECT IDENTIFIER ::= { userLoginSetting 2 }
tacacsLoginAuthServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Server IP Address/Domain name."
::= { tacacsServerSetting 1 }
tacacsLoginAuthPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Port."
::= {tacacsServerSetting 2 }
tacacsLoginAuthSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Shared Key."
::= { tacacsServerSetting 3 }
tacacsLoginAuthAuthType OBJECT-TYPE
SYNTAX INTEGER {
ascii(0),
pap(1),
chap(2),
mschap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Shared Key."
::= { tacacsServerSetting 4 }
tacacsLoginAuthTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Tacacs+ Shared Key."
::= { tacacsServerSetting 5 }
radiusServerSetting OBJECT IDENTIFIER ::= { userLoginSetting 3 }
radiusLoginAuthServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { radiusServerSetting 1 }
radiusLoginAuthPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Port."
::= { radiusServerSetting 2 }
radiusLoginAuthSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { radiusServerSetting 3 }
radiusLoginAuthAuthType OBJECT-TYPE
SYNTAX INTEGER {
eap-md5(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { radiusServerSetting 4 }
radiusLoginAuthTimeout OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { radiusServerSetting 5 }
-- -------------------------------------------------------------
-- port access control
-- -------------------------------------------------------------
portAccessControl OBJECT IDENTIFIER ::= { security 2 }
--
-- static port lock
--
staticPortLock OBJECT IDENTIFIER ::= { portAccessControl 1 }
staticPortLockAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static port lock address."
::= { staticPortLock 1 }
staticPortLockPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port of the static port lock address."
::= { staticPortLock 2 }
staticPortLockStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET."
::= { staticPortLock 3 }
--
-- IEEE 802.1X
--
dot1x OBJECT IDENTIFIER ::= { portAccessControl 2 }
-- ieee 802.1x global settings
dataBaseOption OBJECT-TYPE
SYNTAX INTEGER {
local(1),
radius(2),
radiuslocal(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IEEE 802.1X database option."
::= { dot1x 1 }
dot1xReauthEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1X Re-authentication."
::= { dot1x 5 }
dot1xReauthPeriod OBJECT-TYPE
SYNTAX INTEGER (60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IEEE 802.1X Re-authentication Period."
::= { dot1x 6 }
-- ieee 802.1X port setting table
dot1xSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Port Setting Table."
::= { dot1x 7 }
dot1xSettingEntry OBJECT-TYPE
SYNTAX Dot1xSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Port Setting Entry."
INDEX { portIndex }
::= { dot1xSettingTable 1 }
Dot1xSettingEntry ::=
SEQUENCE {
enableDot1X
INTEGER
}
enableDot1X OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable IEEE 802.1X."
::= { dot1xSettingEntry 1 }
-- ieee 802.1X re-authentication table
dot1xReauthTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xReauthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Re-authentication Table."
::= { dot1x 8 }
dot1xReauthEntry OBJECT-TYPE
SYNTAX Dot1xReauthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802.1X Re-authentication Entry."
INDEX { dot1xReauthPortIndex }
::= { dot1xReauthTable 1 }
Dot1xReauthEntry ::=
SEQUENCE {
dot1xReauthPortIndex
INTEGER,
dot1xReauth
INTEGER
}
dot1xReauthPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IEEE 802.1X Enabled Port Index."
::= { dot1xReauthEntry 1 }
dot1xReauth OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reauth IEEE 802.1X."
::= { dot1xReauthEntry 2 }
-- ieee 802.1x dot1x Radius Server settings
dot1xRadius OBJECT IDENTIFIER ::= { dot1x 9 }
dot1xSameAsAuthServer OBJECT-TYPE
SYNTAX INTEGER
{
notSame(0),
same(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { dot1xRadius 1 }
dot1x1stRadiusServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { dot1xRadius 2 }
dot1x1stRadiusPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Port."
::= { dot1xRadius 3 }
dot1x1stRadiusSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { dot1xRadius 4 }
dot1x2ndRadiusServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Server IP Address/Domain name."
::= { dot1xRadius 5 }
dot1x2ndRadiusPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Port."
::= { dot1xRadius 6 }
dot1x2ndRadiusSharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Shared Key."
::= { dot1xRadius 7 }
--
-- port access control table
--
portAccessControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table."
::= { portAccessControl 3 }
portAccessControlEntry OBJECT-TYPE
SYNTAX PortAccessControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Access Control table entry."
INDEX { portAccessControlAddress }
::= { portAccessControlTable 1 }
PortAccessControlEntry ::=
SEQUENCE {
portAccessControlAddress
MacAddress,
portAccessControlPortNo
INTEGER,
portAccessControlAccessStatus
INTEGER,
portAccessControlStatus
INTEGER
}
portAccessControlAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address which is static locked or IEEE 802.1X authorized."
::= { portAccessControlEntry 1 }
portAccessControlPortNo OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number that the Port Access Control address resides."
::= { portAccessControlEntry 2 }
portAccessControlAccessStatus OBJECT-TYPE
SYNTAX INTEGER {
staticLock(1),
authorized(2),
unAuthorized(3),
authorizing(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access status of the Port Access Control address."
::= { portAccessControlEntry 3 }
portAccessControlStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then active.
Use destroy to delete this row."
::= { portAccessControlEntry 4 }
-- -------------------------------------------------------------
-- accessible ip
-- -------------------------------------------------------------
accessibleIP OBJECT IDENTIFIER ::= { swMgmt 30 }
enableAccessibleIP OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the accessible IP address list."
::= { accessibleIP 1 }
accessibleIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessibleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"accessibleIP."
::= { accessibleIP 2 }
accessibleIpEntry OBJECT-TYPE
SYNTAX AccessibleIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Accessible IP address entry."
INDEX { accessibleIpAddress }
::= { accessibleIpTable 1 }
AccessibleIpEntry ::=
SEQUENCE {
accessibleIpAddress
IpAddress,
accessibleIpNetMask
IpAddress,
accessibleIpStatus
INTEGER
}
accessibleIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Accessible IP address"
::= { accessibleIpEntry 1 }
accessibleIpNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Accessible IP netmask."
::= { accessibleIpEntry 2 }
accessibleIpStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then active.
Use destroy to delete this row."
::= { accessibleIpEntry 3 }
-- -------------------------------------------------------------
-- system file update
-- -------------------------------------------------------------
sysFileUpdate OBJECT IDENTIFIER ::= { swMgmt 31 }
tftpServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP Server name(IP Address)"
::= { sysFileUpdate 1 }
firmwarePathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of firmware file in the TFTP Server"
::= { sysFileUpdate 2 }
logPathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of log file in the TFTP Server"
::= { sysFileUpdate 3 }
confPathName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The path name of configuration file in the TFTP Server"
::= { sysFileUpdate 4 }
tftpUpdate OBJECT-TYPE
SYNTAX INTEGER {
importFirmware(1),
importConfig(2),
exportConfig(3),
exportLog(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { sysFileUpdate 5 }
-- -------------------------------------------------------------
-- time setting
-- -------------------------------------------------------------
timeSetting OBJECT IDENTIFIER ::= { swMgmt 32 }
sysDateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date time of system"
::= { timeSetting 1 }
calibratePeriod OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period (seconds) that calibrate with time server"
::= { timeSetting 2 }
timeServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first time server"
::= { timeSetting 3 }
timeServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second time server"
::= { timeSetting 4 }
daylightSaving OBJECT IDENTIFIER ::= { timeSetting 5 }
startMonth OBJECT-TYPE
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Month of Daylight Saving time"
::= { daylightSaving 1 }
startWeek OBJECT-TYPE
SYNTAX INTEGER { na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Week of Daylight Saving time"
::= { daylightSaving 2 }
startDay OBJECT-TYPE
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Day of Daylight Saving time"
::= { daylightSaving 3 }
startHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Start Hour of Daylight Saving time"
::= { daylightSaving 4 }
endMonth OBJECT-TYPE
SYNTAX INTEGER { na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Month of Daylight Saving time"
::= { daylightSaving 5 }
endWeek OBJECT-TYPE
SYNTAX INTEGER { na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Week of Daylight Saving time"
::= { daylightSaving 6 }
endDay OBJECT-TYPE
SYNTAX INTEGER { na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Day of Daylight Saving time"
::= { daylightSaving 7 }
endHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting End Hour of Daylight Saving time"
::= { daylightSaving 8 }
offsetHours OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting Offset Hours of Daylight Saving time"
::= { daylightSaving 9 }
enableNTPServer OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable NTP Server."
::= { timeSetting 6 }
timeProtocolOption OBJECT-TYPE
SYNTAX INTEGER { disable(0), sntp(1), ntp(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time Protocol."
::= { timeSetting 7 }
-- -------------------------------------------------------------
-- TurboRing Dip Switch setting
-- -------------------------------------------------------------
dipSwitchSetting OBJECT IDENTIFIER ::= { swMgmt 34 }
dipSwitchEnableTurboRing OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable TurboRing Dip Switch functions"
::= { dipSwitchSetting 1 }
dipSwitchTurboRingPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TurboRing Pole status of Dip switch."
::= { dipSwitchSetting 2 }
dipSwitchRingCouplingPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ring Coupling Pole status of Dip switch."
::= { dipSwitchSetting 3 }
dipSwitchRingMasterPole OBJECT-TYPE
SYNTAX INTEGER { off(0), on(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ring Master Pole status of Dip switch."
::= { dipSwitchSetting 4 }
-- -------------------------------------------------------------
-- Auto-Backup Media setting
-- -------------------------------------------------------------
backupMediaSetting OBJECT IDENTIFIER ::= { swMgmt 35 }
backupMediaAutoLoad OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Abc-01 backupMedia configuration PowerOn Auto Load functions"
::= { backupMediaSetting 1 }
-- -------------------------------------------------------------
-- Warm Start setting
-- -------------------------------------------------------------
enableWarmStart OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable to restart MOXA ethernet switch."
::= { swMgmt 36 }
-- -------------------------------------------------------------
-- Syslog setting
-- -------------------------------------------------------------
syslogSetting OBJECT IDENTIFIER ::= { swMgmt 37 }
syslogServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 1"
::= { syslogSetting 1 }
syslogServer1port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 1 port"
::= { syslogSetting 2 }
syslogServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 2"
::= { syslogSetting 3 }
syslogServer2port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 2 port"
::= { syslogSetting 4 }
syslogServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 3"
::= { syslogSetting 5 }
syslogServer3port OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog server 3 port"
::= { syslogSetting 6 }
-- -------------------------------------------------------------
-- DHCP Relay Agent group
-- -------------------------------------------------------------
dhcpRelayAgentSetting OBJECT IDENTIFIER ::= { swMgmt 39 }
dhcpServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 1."
::= { dhcpRelayAgentSetting 1 }
dhcpServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 2."
::= { dhcpRelayAgentSetting 2 }
dhcpServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 3."
::= { dhcpRelayAgentSetting 3 }
dhcpServer4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dhcp Relay Agent Server 4."
::= { dhcpRelayAgentSetting 4 }
option82Setting OBJECT IDENTIFIER ::= { dhcpRelayAgentSetting 5 }
enableOption82 OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable DHCP Option 82"
::= { option82Setting 1 }
option82Type OBJECT-TYPE
SYNTAX INTEGER { ip(0), mac(1), client-id(2), other(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option 82 Type selector "
::= { option82Setting 2 }
option82Value OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option 82 Type Value"
::= { option82Setting 3 }
option82ValueDisplay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Option 82 Type Value Display"
::= { option82Setting 4 }
dhcpFunctionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpFunctionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Function Table."
::= { dhcpRelayAgentSetting 6 }
dhcpFunctionEntry OBJECT-TYPE
SYNTAX DhcpFunctionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Function Table Entry."
INDEX { dhcpPortIndex }
::= { dhcpFunctionTable 1 }
DhcpFunctionEntry ::=
SEQUENCE {
dhcpPortIndex
INTEGER,
circuitID
DisplayString,
option82Enable
INTEGER
}
dhcpPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DHCP Port Index."
::= { dhcpFunctionEntry 1 }
circuitID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Circuit ID."
::= { dhcpFunctionEntry 2 }
option82Enable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable option 82 of the port."
::= { dhcpFunctionEntry 3 }
-- -------------------------------------------------------------
-- Power over Ethernet(POE) Function
-- -------------------------------------------------------------
poeSetting OBJECT IDENTIFIER ::= { swMgmt 40 }
poePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Poe Port Function Table."
::= { poeSetting 3 }
poePortEntry OBJECT-TYPE
SYNTAX PoePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Poe Port Function Table Entry."
INDEX { poePortIndex }
::= { poePortTable 1 }
PoePortEntry ::=
SEQUENCE {
poePortIndex
INTEGER,
poePortEnable
INTEGER,
poePowerOutputMode
INTEGER,
powerLimit
INTEGER,
pdfailure
INTEGER,
pdipaddr
DisplayString,
pdPollingInterval
INTEGER,
poeporttimetabling
INTEGER
}
poePortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port index."
::= { poePortEntry 1 }
poePortEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port Enable."
::= { poePortEntry 2 }
poePowerOutputMode OBJECT-TYPE
SYNTAX INTEGER { auto(0), highPower(1), force(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port Power Output Mode."
::= { poePortEntry 3 }
powerLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE Port Power Budget"
::= { poePortEntry 4 }
pdfailure OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PD check Enable per port."
::= { poePortEntry 5 }
pdipaddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PD ip address."
::= { poePortEntry 6 }
pdPollingInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PD check interval"
::= { poePortEntry 7 }
poeporttimetabling OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE port timetabling"
::= { poePortEntry 8 }
-- PoE Timetabling Table
poeTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoeTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Time Table."
::= { poeSetting 5 }
poeTimeEntry OBJECT-TYPE
SYNTAX PoeTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Time Table Entry."
INDEX { poeTPortIndex, poeWeekDay }
::= { poeTimeTable 1 }
PoeTimeEntry ::=
SEQUENCE {
poeTPortIndex
INTEGER,
poeWeekDay
INTEGER,
poeDayEnable
INTEGER,
poeDayStart
INTEGER,
poeDayStop
INTEGER
}
poeTPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port Index for time table."
::= { poeTimeEntry 1 }
poeWeekDay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"day index for a week."
::= { poeTimeEntry 2 }
poeDayEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or not for one day."
::= { poeTimeEntry 3 }
poeDayStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE Port Start Time"
::= { poeTimeEntry 4 }
poeDayStop OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PoE Port Stop Time"
::= { poeTimeEntry 5 }
-- PoE Status Table
poeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Status Table."
::= { poeSetting 6 }
poeStatusEntry OBJECT-TYPE
SYNTAX PoeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PoE Status Table Entry."
INDEX { poePortIndex}
::= { poeStatusTable 1 }
PoeStatusEntry ::=
SEQUENCE {
poePortStatus
INTEGER,
poePortConsumption
INTEGER,
poePortVoltage
INTEGER,
poePortCurrent
INTEGER
}
poePortStatus OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Status."
::= { poeStatusEntry 1 }
poePortConsumption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Consumption"
::= { poeStatusEntry 2}
poePortVoltage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Voltage"
::= { poeStatusEntry 3 }
poePortCurrent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PoE port Current"
::= { poeStatusEntry 4 }
-- -------------------------------------------------------------
-- PTP Setting
-- -------------------------------------------------------------
ieee1588Setting OBJECT IDENTIFIER ::= { swMgmt 41 }
ptpv1Setting OBJECT IDENTIFIER ::= { ieee1588Setting 1 }
enablePtpv1 OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the PTP function."
::= { ptpv1Setting 1 }
clockModev1 OBJECT-TYPE
SYNTAX INTEGER {
v1BC(0),
v2E2E2stepTC(1),
v2E2E1stepTC(2),
v2P2PTC(3),
v2E2EBC(4),
v2P2PBC(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the clock mode of the PTP clock."
::= { ptpv1Setting 2 }
syncIntervalv1 OBJECT-TYPE
SYNTAX INTEGER {
oneSec(0),
twoSec(1),
fourSec(2),
eightSec(3),
sixteenSec(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logSyncInterval of the PTP clock."
::= { ptpv1Setting 3 }
subDomainNamev1 OBJECT-TYPE
SYNTAX INTEGER {dflt(0),alt1(1),alt2(2),alt3(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subdomain name of the PTP clock."
::= { ptpv1Setting 4 }
preferMasterv1 OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the PTP prefer master function."
::= { ptpv1Setting 5 }
ptpv2Setting OBJECT IDENTIFIER ::= { ieee1588Setting 2 }
enablePtp OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the PTP function."
::= { ptpv2Setting 1 }
clockMode OBJECT-TYPE
SYNTAX INTEGER {
v1BC(0),
v2E2E2stepTC(1),
v2E2E1stepTC(2),
v2P2PTC(3),
v2E2EBC(4),
v2P2PBC(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the clock mode of the PTP clock."
::= { ptpv2Setting 2 }
transport OBJECT-TYPE
SYNTAX INTEGER {ieee802dot3(0),ipv4(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the transport mode of the PTP clock."
::= { ptpv2Setting 3 }
syncInterval OBJECT-TYPE
SYNTAX INTEGER {
t128msec(-3),
t256msec(-2),
t512msec(-1),
t1sec(0),
t2sec(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logSyncInterval of the PTP clock."
::= { ptpv2Setting 4 }
logMinDelayReqInterval OBJECT-TYPE
SYNTAX INTEGER {t1sec(0),t2sec(1),t4sec(2),t8sec(3),t16sec(4),t32sec(5)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logMinDelayReqInterval of the PTP clock."
::= { ptpv2Setting 5 }
logMinPdelayReqInterval OBJECT-TYPE
SYNTAX INTEGER {
t512msec(-1),
t1sec(0),
t2sec(1),
t4sec(2),
t8sec(3),
t16sec(4),
t32sec(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logMinPdelayReqInterval of the PTP clock."
::= { ptpv2Setting 6 }
logAnnounceInterval OBJECT-TYPE
SYNTAX INTEGER {t1sec(0),t2sec(1),t4sec(2),t8sec(3),t16sec(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the logAnnounceInterval of the PTP clock."
::= { ptpv2Setting 7 }
announceReceiptTimeout OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the announceReceiptTimeout of the PTP clock."
::= { ptpv2Setting 8 }
priority1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the priority1 of the PTP clock."
::= { ptpv2Setting 9 }
priority2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the priority2 of the PTP clock."
::= { ptpv2Setting 10 }
clockClass OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the clockClass of the PTP clock."
::= { ptpv2Setting 11 }
domainNumber OBJECT-TYPE
SYNTAX INTEGER {dflt(0),alt1(1),alt2(2),alt3(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The domain number of the PTP clock."
::= { ptpv2Setting 12 }
localUtcOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the UTC offset of the local PTP clock."
::= { ptpv2Setting 13 }
localUtcOffsetValid OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the UTC offset valid of the local PTP clock."
::= { ptpv2Setting 14 }
localLeap59 OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the leap59 of the local PTP clock."
::= { ptpv2Setting 15 }
localLeap61 OBJECT-TYPE
SYNTAX INTEGER {false(0),true(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the leap61 of the local PTP clock."
::= { ptpv2Setting 16 }
localPtpTimescale OBJECT-TYPE
SYNTAX INTEGER {arb(0),ptp(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the timescale of the local PTP clock."
::= { ptpv2Setting 17 }
localArbTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ARB time of the local PTP clock."
::= { ptpv2Setting 18 }
ptpv1Status OBJECT IDENTIFIER ::= { ieee1588Setting 3 }
offsetToMasterv1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offset to master for nsec."
::= { ptpv1Status 1 }
meanPathDelayv1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean path delay of the PTP clock."
::= { ptpv1Status 2 }
grandMasterUuidv1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grand master UUID address of the PTP clock."
::= { ptpv1Status 3 }
parentUuidv1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parent master UUID address of the PTP clock."
::= { ptpv1Status 4 }
clockStratumv1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The clock stratum of the PTP clock."
::= { ptpv1Status 5 }
clockIdentifierv1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The clock identifier of the PTP clock."
::= { ptpv1Status 6 }
ptpv2Status OBJECT IDENTIFIER ::= { ieee1588Setting 4 }
offsetToMaster OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offset to master for nsec."
::= { ptpv2Status 1 }
meanPathDelay OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mean path delay of the PTP clock."
::= { ptpv2Status 2 }
parentIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parent identity of the PTP clock."
::= { ptpv2Status 3 }
grandmasterIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster identity of the PTP clock."
::= { ptpv2Status 4 }
grandmasterClockClass OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster clockClass of the PTP clock."
::= { ptpv2Status 5 }
grandmasterClockAccuracy OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster clockAccuracy of the PTP clock."
::= { ptpv2Status 6 }
grandmasterPriority1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster priority1 of the PTP clock."
::= { ptpv2Status 7 }
grandmasterPriority2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The grandmaster priority2 of the PTP clock."
::= { ptpv2Status 8 }
stepsRemoved OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The steps removed of the PTP clock."
::= { ptpv2Status 9 }
currentUtcOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current utc offset of the PTP clock."
::= { ptpv2Status 10 }
currentUtcOffsetValid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current utc offset valid flag of the PTP clock."
::= { ptpv2Status 11 }
leap59 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The leap59 of the PTP clock."
::= { ptpv2Status 12 }
leap61 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The leap61 of the PTP clock."
::= { ptpv2Status 13 }
ptpTimescale OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ptp timescale of the PTP clock."
::= { ptpv2Status 14 }
timesource OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timesource of the PTP clock."
::= { ptpv2Status 15 }
ptpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ptp port table."
::= { ieee1588Setting 5 }
ptpPortEntry OBJECT-TYPE
SYNTAX PtpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ptp port entry."
INDEX { ptpPortIndex }
::= { ptpPortTable 1 }
PtpPortEntry ::=
SEQUENCE {
ptpPortIndex
INTEGER,
ptpPortEnable
INTEGER,
ptpPortStatus
INTEGER
}
ptpPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ptp port index."
::= { ptpPortEntry 1 }
ptpPortEnable OBJECT-TYPE
SYNTAX INTEGER { disable(0), enable(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the ptp port."
::= { ptpPortEntry 2 }
ptpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
ptpInitializing(0),
ptpFaulty(1),
ptpDisabled(2),
ptpListening(3),
ptpPreMaster(4),
ptpMaster(5),
ptpPassive(6),
ptpUncalibrated(7),
ptpSlave(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This port status of the PTP clock."
::= { ptpPortEntry 3 }
-- -------------------------------------------------------------
-- swTraps group
-- -------------------------------------------------------------
varconfigChangeTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no config change happened
configChanged(2) -- config changed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration has been changed."
::= { swTraps 1 }
configChangeTrap NOTIFICATION-TYPE
OBJECTS { varconfigChangeTrap }
STATUS current
DESCRIPTION
"The configuration has been changed."
::= { mibNotificationsPrefix 1 }
varpower1Trap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no power on/off
on2off(2), -- power on to power off
off2on(3) -- power off to power on
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power on/off changed."
::= { swTraps 2 }
power1Trap NOTIFICATION-TYPE
OBJECTS { varpower1Trap }
STATUS current
DESCRIPTION
"The power on/off changed."
::= { mibNotificationsPrefix 2 }
varpower2Trap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no power on/off
on2off(2), -- power on to power off
off2on(3) -- power off to power on
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power on/off changed."
::= { swTraps 3 }
power2Trap NOTIFICATION-TYPE
OBJECTS { varpower2Trap }
STATUS current
DESCRIPTION
"The power on/off changed."
::= { mibNotificationsPrefix 3 }
vartrafficOverloadTrap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ethernet port's traffic loading exceeds the pre-defined value."
::= { swTraps 4 }
trafficOverloadTrap NOTIFICATION-TYPE
OBJECTS { vartrafficOverloadTrap }
STATUS current
DESCRIPTION
"The ethernet port's traffic loading exceeds the pre-defined value."
::= { mibNotificationsPrefix 4 }
varredundancyTopologyChangedTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no topology change
topologyChanged(2), -- topology changed
topologyChangedTurboChainHead(3), -- topology change turboChain head
topologyChangedTurboChainTail(4) -- topology change turboChain tail
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The redundancy topology has been changed."
::= { swTraps 5 }
redundancyTopologyChangedTrap NOTIFICATION-TYPE
OBJECTS { varredundancyTopologyChangedTrap }
STATUS current
DESCRIPTION
"The redundancy topology has been changed."
::= { mibNotificationsPrefix 5 }
varturboRingCouplingPortChangedTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no topology change
couplingPortChanged(2) -- coupling port changed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The coupling path of Turbo Ring has been changed."
::= { swTraps 6 }
turboRingCouplingPortChangedTrap NOTIFICATION-TYPE
OBJECTS { varturboRingCouplingPortChangedTrap }
STATUS current
DESCRIPTION
"The coupling path of Turbo Ring has been changed."
::= { mibNotificationsPrefix 6 }
varturboRingMasterChangedTrap OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no topology change
ringMasterChanged(2) -- ring master changed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master of Turbo Ring has been changed."
::= { swTraps 7 }
turboRingMasterChangedTrap NOTIFICATION-TYPE
OBJECTS { varturboRingMasterChangedTrap }
STATUS current
DESCRIPTION
"The master of Turbo Ring has been changed."
::= { mibNotificationsPrefix 7 }
varPoEWarningTrap OBJECT-TYPE
SYNTAX INTEGER {
pdOverCurrent(1), -- PoE port over-current/short-circuit
pdCheckFail(2), -- PD Failure Check (no response)
pdPowerOn(3), -- PoE port power on
pdPowerOff(4), -- PoE port power off
exceedSystemThreshold(5),-- Exceed PoE system threshold
pseFetBad(6), -- PoE port External FET has failed
pseOverTemperature(7), -- PSE chip is over temperature
pseVeeUvlo(8) -- PSE chip VEE under voltage lockout
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The POE warning message."
::= { swTraps 16 }
-- -------------------------------------------------------------
-- Diagnosis: LLDP Setting
-- -------------------------------------------------------------
diagnosis OBJECT IDENTIFIER ::= { swMgmt 42 }
lldpSetting OBJECT IDENTIFIER ::= { diagnosis 1 }
enableLLDP OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the LLDP function."
::= { lldpSetting 1 }
lldpMSGInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LLDP message transmit interval."
::= { lldpSetting 2 }
-- -------------------------------------------------------------
-- Industrial Protocol
-- -------------------------------------------------------------
industrialProtocol OBJECT IDENTIFIER ::= { swMgmt 47 }
eipSetting OBJECT IDENTIFIER ::= { industrialProtocol 1 }
modbusTCPSetting OBJECT IDENTIFIER ::= { industrialProtocol 2 }
enableEtherNetIP OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the EtherNet/IP function."
::= { eipSetting 1 }
enableModbusTCP OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the Modbus TCP function."
::= { modbusTCPSetting 1 }
-- -------------------------------------------------------------
-- GARP
-- -------------------------------------------------------------
garpSetting OBJECT IDENTIFIER ::= { swMgmt 45 }
leaveAllTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Leaveall Time (ms)."
::= { garpSetting 3 }
leaveTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Leave Time (ms)."
::= { garpSetting 2 }
joinTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Join Time (ms)."
::= { garpSetting 1 }
-- -------------------------------------------------------------
-- Factory Default setting
-- -------------------------------------------------------------
enableFactoryDefault OBJECT-TYPE
SYNTAX INTEGER
{
activate(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all EtherDevice switch settings to factory default values"
::= { swMgmt 48 }
-- -------------------------------------------------------------
-- eventlog
-- -------------------------------------------------------------
eventlog OBJECT IDENTIFIER ::= { swMgmt 46 }
eventlogTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventlogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of eventlog."
::= { eventlog 1 }
eventlogEntry OBJECT-TYPE
SYNTAX EventlogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table entry of eventlog."
INDEX { eventlogIndex }
::= { eventlogTable 1 }
EventlogEntry ::=
SEQUENCE {
eventlogIndex
INTEGER,
eventlogBootup
INTEGER,
eventlogDate
DisplayString,
eventlogTime
DisplayString,
eventlogUptime
DisplayString,
eventlogEvent
DisplayString
}
eventlogIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of eventlog entry."
::= { eventlogEntry 1 }
eventlogBootup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reboot count of the system."
::= { eventlogEntry 2 }
eventlogDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of the event occurred."
::= { eventlogEntry 3 }
eventlogTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the event occurred."
::= { eventlogEntry 4 }
eventlogUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the event occurred after booting up."
::= { eventlogEntry 5 }
eventlogEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The event which occurred in the system."
::= { eventlogEntry 6 }
eventlogClear OBJECT-TYPE
SYNTAX INTEGER { noop(0), clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To clear the eventlog, set value 1 to this field."
::= { eventlog 2 }
-- -------------------------------------------------------------
-- CPU Loading and Free Memory info.
-- -------------------------------------------------------------
cpuLoading5s OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Loading for the past 5 seconds in %."
::= { swMgmt 53 }
cpuLoading30s OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Loading for the past 30 seconds in %."
::= { swMgmt 54 }
cpuLoading300s OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Loading for the past 5 minutes in %."
::= { swMgmt 55 }
totalMemory OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of System RAM."
::= { swMgmt 56 }
freeMemory OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of free dynamic memory"
::= { swMgmt 57 }
usedMemory OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of used dynamic memory"
::= { swMgmt 58 }
memoryUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The usage of memory size in %."
::= { swMgmt 59 }
-- -------------------------------------------------------------
-- Loop Protection info.
-- -------------------------------------------------------------
loopProtection OBJECT-TYPE
SYNTAX INTEGER {disable(0),enable(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enable the Loop Protection function."
::= { swMgmt 61 }
END