mibs/nokia/ALCATEL-IND1-HEALTH-MIB
ALCATEL-IND1-HEALTH-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY,
OBJECT-IDENTITY,
NOTIFICATION-TYPE FROM SNMPv2-SMI
DisplayString FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
healthMonTraps,
softentIND1Health FROM ALCATEL-IND1-BASE
ifIndex FROM IF-MIB;
alcatelIND1HealthMonitorMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Health Monitoring for dissemination of resource consumption information.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"Addressing discrepancies with Alcatel Standard."
::= { softentIND1Health 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1HealthMonitorMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Health Montor Subsystem Managed Objects."
::= { alcatelIND1HealthMonitorMIB 1 }
alcatelIND1HealthMonitorMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Health Montor Subsystem Managed Objects."
::= { alcatelIND1HealthMonitorMIB 2 }
alcatelIND1HealthMonitorMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Health Montor Subsystem Managed Objects."
::= { alcatelIND1HealthMonitorMIBConformance 1}
alcatelIND1HealthMonitorMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Health Montor Subsystem Managed Objects."
::= { alcatelIND1HealthMonitorMIBConformance 2}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthDeviceInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthDeviceInfo contains device-level
-- health monitoring information.
healthDeviceRxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level input utilization over the
latest sample period (percent)."
::= { healthDeviceInfo 1 }
healthDeviceRx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level input utilization over the
last minute (percent)."
::= { healthDeviceInfo 2 }
healthDeviceRx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level input utilization over the
last hour (percent)."
::= { healthDeviceInfo 3 }
healthDeviceRx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute device-level input utilization over the
last hour (percent)."
::= { healthDeviceInfo 4 }
healthDeviceRxTxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level i/o utilization over the
latest sample period (percent)."
::= { healthDeviceInfo 5 }
healthDeviceRxTx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level i/o utilization over the
last minute (percent)."
::= { healthDeviceInfo 6 }
healthDeviceRxTx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level i/o utilization over the
last hour (percent)."
::= { healthDeviceInfo 7 }
healthDeviceRxTx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute device-level i/o utilization over the
last hour (percent)."
::= { healthDeviceInfo 8 }
healthDeviceMemoryLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level memory utilization over the
latest sample period (percent)."
::= { healthDeviceInfo 9 }
healthDeviceMemory1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level memory utilization over the
last minute (percent)."
::= { healthDeviceInfo 10 }
healthDeviceMemory1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level memory utilization over the
last hour (percent)."
::= { healthDeviceInfo 11 }
healthDeviceMemory1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute device-level memory utilization over the
last hour (percent)."
::= { healthDeviceInfo 12 }
healthDeviceCpuLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level CPU utilization over the
latest sample period (percent)."
::= { healthDeviceInfo 13 }
healthDeviceCpu1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level CPU utilization over the
last minute (percent)."
::= { healthDeviceInfo 14 }
healthDeviceCpu1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average device-level CPU utilization over the
last hour (percent)."
::= { healthDeviceInfo 15 }
healthDeviceCpu1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute device-level CPU utilization over the
last hour (percent)."
::= { healthDeviceInfo 16 }
healthDeviceTemperatureChasLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average chassis temperature over the
latest sample period (percent)."
::= { healthDeviceInfo 17 }
healthDeviceTemperatureChas1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average chassis temperature over the
last minute (percent)."
::= { healthDeviceInfo 18 }
healthDeviceTemperatureChas1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average chassis temperature over the
last hour (percent)."
::= { healthDeviceInfo 19 }
healthDeviceTemperatureChas1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute chassis temperature over the
last hour (percent)."
::= { healthDeviceInfo 20 }
healthDeviceTemperatureCmmCpuLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Average CMM CPU temperature over the
latest sample period (percent)."
::= { healthDeviceInfo 21 }
healthDeviceTemperatureCmmCpu1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Average CMM CPU temperature over the
last minute (percent)."
::= { healthDeviceInfo 22 }
healthDeviceTemperatureCmmCpu1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Average CMM CPU temperature over the
last hour (percent)."
::= { healthDeviceInfo 23 }
healthDeviceTemperatureCmmCpu1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Maximum one-minute CMM CPU temperature over the
last hour (percent)."
::= { healthDeviceInfo 24 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthModuleInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthModuleInfo contains slot-level health monitoring information.
healthModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF HealthModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of installed modules in this chassis."
::= { healthModuleInfo 1 }
healthModuleEntry OBJECT-TYPE
SYNTAX HealthModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A module entry containing objects for a module in a specific 'slot'."
INDEX { healthModuleSlot }
::= { healthModuleTable 1 }
HealthModuleEntry ::= SEQUENCE {
healthModuleSlot
INTEGER,
healthModuleRxLatest
INTEGER,
healthModuleRx1MinAvg
INTEGER,
healthModuleRx1HrAvg
INTEGER,
healthModuleRx1HrMax
INTEGER,
healthModuleRxTxLatest
INTEGER,
healthModuleRxTx1MinAvg
INTEGER,
healthModuleRxTx1HrAvg
INTEGER,
healthModuleRxTx1HrMax
INTEGER,
healthModuleMemoryLatest
INTEGER,
healthModuleMemory1MinAvg
INTEGER,
healthModuleMemory1HrAvg
INTEGER,
healthModuleMemory1HrMax
INTEGER,
healthModuleCpuLatest
INTEGER,
healthModuleCpu1MinAvg
INTEGER,
healthModuleCpu1HrAvg
INTEGER,
healthModuleCpu1HrMax
INTEGER
}
healthModuleSlot OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (one-based) front slot number within the chassis."
::= { healthModuleEntry 1 }
healthModuleRxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level input utilization over the
latest sample period (percent)."
::= { healthModuleEntry 2 }
healthModuleRx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level input utilization over the
last minute (percent)."
::= { healthModuleEntry 3 }
healthModuleRx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level input utilization over the
last hour (percent)."
::= { healthModuleEntry 4 }
healthModuleRx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute module-level input utilization over the
last hour (percent)."
::= { healthModuleEntry 5 }
healthModuleRxTxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level i/o utilization over the
latest sample period (percent)."
::= { healthModuleEntry 6 }
healthModuleRxTx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level i/o utilization over the
last minute (percent)."
::= { healthModuleEntry 7 }
healthModuleRxTx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level i/o utilization over the
last hour (percent)."
::= { healthModuleEntry 8 }
healthModuleRxTx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute module-level i/o utilization over the
last hour (percent)."
::= { healthModuleEntry 9 }
healthModuleMemoryLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level memory utilization over the
latest sample period (percent)."
::= { healthModuleEntry 10 }
healthModuleMemory1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level memory utilization over the
last minute (percent)."
::= { healthModuleEntry 11 }
healthModuleMemory1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level memory utilization over the
last hour (percent)."
::= { healthModuleEntry 12 }
healthModuleMemory1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute module-level memory utilization over the
last hour (percent)."
::= { healthModuleEntry 13 }
healthModuleCpuLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level CPU utilization over the
latest sample period (percent)."
::= { healthModuleEntry 14 }
healthModuleCpu1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level CPU utilization over the
last minute (percent)."
::= { healthModuleEntry 15 }
healthModuleCpu1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average module-level CPU utilization over the
last hour (percent)."
::= { healthModuleEntry 16 }
healthModuleCpu1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute module-level CPU utilization over the
last hour (percent)."
::= { healthModuleEntry 17 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthPortInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthPortInfo contains port-level health monitoring information.
HealthPortUpDownStatus ::= INTEGER {
healthPortDn(1),
healthPortUp(2)
}
healthPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HealthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Physical Port health instances."
::= { healthPortInfo 1 }
healthPortEntry OBJECT-TYPE
SYNTAX HealthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Physical Port health entry."
INDEX { healthPortSlot, healthPortIF }
::= { healthPortTable 1 }
HealthPortEntry ::= SEQUENCE {
healthPortSlot
INTEGER,
healthPortIF
INTEGER,
healthPortUpDn
HealthPortUpDownStatus,
healthPortRxLatest
INTEGER,
healthPortRx1MinAvg
INTEGER,
healthPortRx1HrAvg
INTEGER,
healthPortRx1HrMax
INTEGER,
healthPortRxTxLatest
INTEGER,
healthPortRxTx1MinAvg
INTEGER,
healthPortRxTx1HrAvg
INTEGER,
healthPortRxTx1HrMax
INTEGER
}
healthPortSlot OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot number for this port."
::= { healthPortEntry 1 }
healthPortIF OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The on-board interface number."
::= { healthPortEntry 2 }
healthPortUpDn OBJECT-TYPE
SYNTAX HealthPortUpDownStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this port."
::= { healthPortEntry 3 }
healthPortRxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average port-level input utilization over the
latest sample period (percent)."
::= { healthPortEntry 4 }
healthPortRx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average port-level input utilization over the
last minute (percent)."
::= { healthPortEntry 5 }
healthPortRx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average port-level input utilization over the
last hour (percent)."
::= { healthPortEntry 6 }
healthPortRx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute port-level input utilization over the
last hour (percent)."
::= { healthPortEntry 7 }
healthPortRxTxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average port-level i/o utilization over the
latest sample period (percent)."
::= { healthPortEntry 8 }
healthPortRxTx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average port-level i/o utilization over the
last minute (percent)."
::= { healthPortEntry 9 }
healthPortRxTx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average port-level i/o utilization over the
last hour (percent)."
::= { healthPortEntry 10 }
healthPortRxTx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute port-level i/o utilization over the
last hour (percent)."
::= { healthPortEntry 11 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthControlInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthControl contains the variables
-- which control operation of resource utilization sampling.
--
healthSamplingInterval OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time interval between consecutive samples of resources.
Units are seconds. Legal values are: 1,2,3,4,5,6,10,12,15,20,30."
DEFVAL { 5 }
::= { healthControlInfo 1 }
healthSamplingReset OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Any set of this variable causes all health counters to reset
to zero and a restart of sampling."
DEFVAL { 1 }
::= { healthControlInfo 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthThreshInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 5 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthThreshInfo contains the threshold data.
--
healthThreshDeviceRxLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device input threshold value. Units are percent."
DEFVAL { 80 }
::= { healthThreshInfo 1 }
healthThreshDeviceRxTxLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device input/output threshold value. Units are percent."
DEFVAL { 80 }
::= { healthThreshInfo 2 }
healthThreshDeviceMemoryLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device memory threshold value. Units are percent."
DEFVAL { 80 }
::= { healthThreshInfo 3 }
healthThreshDeviceCpuLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device Cpu threshold value. Units are percent."
DEFVAL { 80 }
::= { healthThreshInfo 4 }
healthThreshDeviceRxSecondaryLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device input secondary threshold value. Units are percent."
DEFVAL { 60 }
::= { healthThreshInfo 5 }
healthThreshDeviceRxTxSecondaryLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device input/output secondary threshold value. Units are percent."
DEFVAL { 60 }
::= { healthThreshInfo 6 }
healthThreshDeviceMemorySecondaryLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device memory secondary threshold value. Units are percent."
DEFVAL { 60 }
::= { healthThreshInfo 7 }
healthThreshDeviceCpuSecondaryLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device CPU secondary threshold value. Units are percent."
DEFVAL { 60 }
::= { healthThreshInfo 8 }
healthThreshDeviceTempLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device Temperature threshold value. Units are degrees Celsius."
DEFVAL { 50 }
::= { healthThreshInfo 9 }
healthThreshDeviceTempSecondaryLimit OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Device Temperature secondary threshold value. Units are degrees Celsius."
DEFVAL { 40 }
::= { healthThreshInfo 10 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthSliceInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 7 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthSliceInfo contains the slice data.
--
healthSliceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HealthSliceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Physical Slice health instances."
::= { healthSliceInfo 1 }
healthSliceEntry OBJECT-TYPE
SYNTAX HealthSliceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Physical Slice health entry."
INDEX { healthSliceSlot, healthSliceSlice }
::= { healthSliceTable 1 }
HealthSliceEntry ::= SEQUENCE {
healthSliceSlot
INTEGER,
healthSliceSlice
INTEGER,
healthSliceMemoryLatest
INTEGER,
healthSliceCpuLatest
INTEGER
}
healthSliceSlot OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical slot number for this slice."
::= { healthSliceEntry 1 }
healthSliceSlice OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The on-board slice number."
::= { healthSliceEntry 2 }
healthSliceMemoryLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slice-level memory utilization over the
latest sample period (percent)."
::= { healthSliceEntry 3 }
healthSliceCpuLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slice-level Cpu utilization over the
latest sample period (percent)."
::= { healthSliceEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthFabricInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 8 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthFabricInfo contains the fabric data.
--
healthFabricTable OBJECT-TYPE
SYNTAX SEQUENCE OF HealthFabricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of installed modules in this chassis."
::= { healthFabricInfo 1 }
healthFabricEntry OBJECT-TYPE
SYNTAX HealthFabricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fabric entry containing objects for a module in a specific 'slot'."
INDEX { healthFabricSlot }
::= { healthFabricTable 1 }
HealthFabricEntry ::= SEQUENCE {
healthFabricSlot
INTEGER,
healthFabricPrimaryRxLatest
INTEGER,
healthFabricPrimaryRx1MinAvg
INTEGER,
healthFabricPrimaryRx1HrAvg
INTEGER,
healthFabricPrimaryRx1HrMax
INTEGER,
healthFabricPrimaryRxTxLatest
INTEGER,
healthFabricPrimaryRxTx1MinAvg
INTEGER,
healthFabricPrimaryRxTx1HrAvg
INTEGER,
healthFabricPrimaryRxTx1HrMax
INTEGER,
healthFabricSecondaryRxLatest
INTEGER,
healthFabricSecondaryRx1MinAvg
INTEGER,
healthFabricSecondaryRx1HrAvg
INTEGER,
healthFabricSecondaryRx1HrMax
INTEGER,
healthFabricSecondaryRxTxLatest
INTEGER,
healthFabricSecondaryRxTx1MinAvg
INTEGER,
healthFabricSecondaryRxTx1HrAvg
INTEGER,
healthFabricSecondaryRxTx1HrMax
INTEGER,
healthFabricPrimaryLink1RxLatest
INTEGER,
healthFabricPrimaryLink1Rx1MinAvg
INTEGER,
healthFabricPrimaryLink1Rx1HrAvg
INTEGER,
healthFabricPrimaryLink1Rx1HrMax
INTEGER,
healthFabricPrimaryLink1RxTxLatest
INTEGER,
healthFabricPrimaryLink1RxTx1MinAvg
INTEGER,
healthFabricPrimaryLink1RxTx1HrAvg
INTEGER,
healthFabricPrimaryLink1RxTx1HrMax
INTEGER,
healthFabricSecondaryLink1RxLatest
INTEGER,
healthFabricSecondaryLink1Rx1MinAvg
INTEGER,
healthFabricSecondaryLink1Rx1HrAvg
INTEGER,
healthFabricSecondaryLink1Rx1HrMax
INTEGER,
healthFabricSecondaryLink1RxTxLatest
INTEGER,
healthFabricSecondaryLink1RxTx1MinAvg
INTEGER,
healthFabricSecondaryLink1RxTx1HrAvg
INTEGER,
healthFabricSecondaryLink1RxTx1HrMax
INTEGER
}
healthFabricSlot OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (one-based) front slot number within the chassis."
::= { healthFabricEntry 1 }
healthFabricPrimaryRxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric input utilization over the
latest sample period (percent). If the switch has multiple
fabric links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 2 }
healthFabricPrimaryRx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric input utilization over the
last minute (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 3 }
healthFabricPrimaryRx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric input utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 4 }
healthFabricPrimaryRx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute primary fabric input utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 5 }
healthFabricPrimaryRxTxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric i/o utilization over the
latest sample period (percent). If the switch has multiple
fabric links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 6 }
healthFabricPrimaryRxTx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric i/o utilization over the
last minute (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 7 }
healthFabricPrimaryRxTx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric i/o utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 8 }
healthFabricPrimaryRxTx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute primary fabric i/o utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 9 }
healthFabricSecondaryRxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric input utilization over the
latest sample period (percent). If the switch has multiple
fabric links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 10 }
healthFabricSecondaryRx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric input utilization over the
last minute (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 11 }
healthFabricSecondaryRx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric input utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 12 }
healthFabricSecondaryRx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute secondary fabric input utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 13 }
healthFabricSecondaryRxTxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric i/o utilization over the
latest sample period (percent). If the switch has multiple
fabric links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 14 }
healthFabricSecondaryRxTx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric i/o utilization over the
last minute (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 15 }
healthFabricSecondaryRxTx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric i/o utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 16 }
healthFabricSecondaryRxTx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute secondary fabric i/o utilization over the
last hour (percent). If the switch has multiple fabric
links it represents the value for Link0 of the fabric."
::= { healthFabricEntry 17 }
healthFabricPrimaryLink1RxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric link1 input utilization over the
latest sample period (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 18 }
healthFabricPrimaryLink1Rx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric link1 input utilization over the
last minute (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 19 }
healthFabricPrimaryLink1Rx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric link1 input utilization over the
last hour (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 20 }
healthFabricPrimaryLink1Rx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute primary fabric link1 input utilization over the
last hour (percent). Only used for a switch with multiple fabric
links."
::= { healthFabricEntry 21 }
healthFabricPrimaryLink1RxTxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric link1 i/o utilization over the
latest sample period (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 22 }
healthFabricPrimaryLink1RxTx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric link1 i/o utilization over the
last minute (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 23 }
healthFabricPrimaryLink1RxTx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average primary fabric link1 i/o utilization over the
last hour (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 24 }
healthFabricPrimaryLink1RxTx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute primary fabric link1 i/o utilization over the
last hour (percent). Only used for a switch with multiple fabric
links."
::= { healthFabricEntry 25 }
healthFabricSecondaryLink1RxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric link1 input utilization over the
latest sample period (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 26 }
healthFabricSecondaryLink1Rx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric link1 input utilization over the
last minute (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 27 }
healthFabricSecondaryLink1Rx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric link1 input utilization over the
last hour (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 28 }
healthFabricSecondaryLink1Rx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute secondary fabric link1 input utilization over the
last hour (percent). Only used for a switch with multiple fabric
links."
::= { healthFabricEntry 29 }
healthFabricSecondaryLink1RxTxLatest OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric link1 i/o utilization over the
latest sample period (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 30 }
healthFabricSecondaryLink1RxTx1MinAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric link1 i/o utilization over the
last minute (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 31 }
healthFabricSecondaryLink1RxTx1HrAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average secondary fabric link1 i/o utilization over the
last hour (percent). Only used for a switch
with multiple fabric links."
::= { healthFabricEntry 32 }
healthFabricSecondaryLink1RxTx1HrMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum one-minute secondary fabric link1 i/o utilization over the
last hour (percent). Only used for a switch with multiple fabric
links."
::= { healthFabricEntry 33 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthTrapInfo OBJECT IDENTIFIER ::= { alcatelIND1HealthMonitorMIBObjects 6 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- healthTrapInfo contains objects exclusively used in traps.
--
healthMonRxStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx threshold status."
::= { healthTrapInfo 1 }
healthMonRxTxStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RxTx threshold status."
::= { healthTrapInfo 2 }
healthMonMemoryStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Memory threshold status."
::= { healthTrapInfo 3 }
healthMonCpuStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU threshold status."
::= { healthTrapInfo 4 }
healthMonCmmTempStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CMM temperature threshold status."
::= { healthTrapInfo 5 }
healthMonCmmCpuTempStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CMM CPU temperature threshold status."
::= { healthTrapInfo 6 }
healthMonPrimaryFabricRxStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary Fabric Rx threshold status."
::= { healthTrapInfo 7 }
healthMonPrimaryFabricRxTxStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary Fabric RxTx threshold status."
::= { healthTrapInfo 8 }
healthMonSecondaryFabricRxStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Secondary Fabric Rx threshold status."
::= { healthTrapInfo 9 }
healthMonSecondaryFabricRxTxStatus OBJECT-TYPE
SYNTAX INTEGER {
crossedBelowThreshold (1),
noChange (2),
crossedAboveThreshold (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Secondary Fabric RxTx threshold status."
::= { healthTrapInfo 10 }
healthMonIpcPoolStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ipc Pools Usage status."
::= { healthTrapInfo 11 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- NOTIFICATIONS
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthMonDeviceTrap NOTIFICATION-TYPE
OBJECTS {
healthMonRxStatus,
healthMonRxTxStatus,
healthMonMemoryStatus,
healthMonCpuStatus,
healthMonCmmTempStatus,
healthMonCmmCpuTempStatus
}
STATUS current
DESCRIPTION
"Device-level rising/falling threshold crossing trap."
::= { healthMonTraps 0 1 }
healthMonModuleTrap NOTIFICATION-TYPE
OBJECTS {
healthModuleSlot,
healthMonRxStatus,
healthMonRxTxStatus,
healthMonMemoryStatus,
healthMonCpuStatus,
healthMonPrimaryFabricRxStatus,
healthMonPrimaryFabricRxTxStatus,
healthMonSecondaryFabricRxStatus,
healthMonSecondaryFabricRxTxStatus
}
STATUS current
DESCRIPTION
"Module-level rising/falling threshold crossing trap."
::= { healthMonTraps 0 2 }
healthMonPortTrap NOTIFICATION-TYPE
OBJECTS {
healthPortSlot,
healthPortIF,
healthMonRxStatus,
healthMonRxTxStatus
}
STATUS current
DESCRIPTION
"Port-level rising/falling threshold crossing trap."
::= { healthMonTraps 0 3 }
healthMonIpcTrap NOTIFICATION-TYPE
OBJECTS {
healthMonIpcPoolStatus
}
STATUS current
DESCRIPTION
"IPC pools exceed usage/ causing trap."
::= { healthMonTraps 0 4 }
healthMonCpuShutPortTrap NOTIFICATION-TYPE
OBJECTS {
healthModuleSlot,
ifIndex,
healthModuleCpuLatest
}
STATUS current
DESCRIPTION
"Port Shutdown notification for CPU spike."
::= { healthMonTraps 0 5 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1HealthMonitorMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Health Monitoring."
MODULE
MANDATORY-GROUPS
{
healthDeviceGroup,
healthModuleGroup,
healthPortGroup,
healthControlGroup,
healthThreshGroup,
healthSliceGroup
}
::= { alcatelIND1HealthMonitorMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
healthDeviceGroup OBJECT-GROUP
OBJECTS
{
healthDeviceRxLatest,
healthDeviceRx1MinAvg,
healthDeviceRx1HrAvg,
healthDeviceRx1HrMax,
healthDeviceRxTxLatest,
healthDeviceRxTx1MinAvg,
healthDeviceRxTx1MinAvg,
healthDeviceRxTx1HrAvg,
healthDeviceRxTx1HrMax,
healthDeviceMemoryLatest,
healthDeviceMemory1MinAvg,
healthDeviceMemory1HrAvg,
healthDeviceMemory1HrMax,
healthDeviceCpuLatest,
healthDeviceCpu1MinAvg,
healthDeviceCpu1HrAvg,
healthDeviceCpu1HrMax,
healthDeviceTemperatureChas1HrMax,
healthDeviceTemperatureChasLatest,
healthDeviceTemperatureChas1MinAvg,
healthDeviceTemperatureChas1HrAvg,
healthDeviceTemperatureChas1HrMax,
healthDeviceTemperatureCmmCpuLatest,
healthDeviceTemperatureCmmCpu1MinAvg,
healthDeviceTemperatureCmmCpu1HrAvg,
healthDeviceTemperatureCmmCpu1HrMax
}
STATUS current
DESCRIPTION
"Collection of device-level health monitoring objects."
::= { alcatelIND1HealthMonitorMIBGroups 1 }
healthModuleGroup OBJECT-GROUP
OBJECTS
{
healthModuleSlot,
healthModuleRxLatest,
healthModuleRx1MinAvg,
healthModuleRx1HrAvg,
healthModuleRx1HrMax,
healthModuleRxTxLatest,
healthModuleRxTx1MinAvg,
healthModuleRxTx1MinAvg,
healthModuleRxTx1HrAvg,
healthModuleRxTx1HrMax,
healthModuleMemoryLatest,
healthModuleMemory1MinAvg,
healthModuleMemory1HrAvg,
healthModuleMemory1HrMax,
healthModuleCpuLatest,
healthModuleCpu1MinAvg,
healthModuleCpu1HrAvg,
healthModuleCpu1HrMax
}
STATUS current
DESCRIPTION
"Collection of slot-level health monitoring objects."
::= { alcatelIND1HealthMonitorMIBGroups 2 }
healthPortGroup OBJECT-GROUP
OBJECTS
{
healthPortSlot,
healthPortIF,
healthPortRxLatest,
healthPortRx1MinAvg,
healthPortRx1HrAvg,
healthPortRx1HrMax,
healthPortRxTxLatest,
healthPortRxTx1MinAvg,
healthPortRxTx1MinAvg,
healthPortRxTx1HrAvg,
healthPortRxTx1HrMax
}
STATUS current
DESCRIPTION
"Collection of port-level health monitoring objects."
::= { alcatelIND1HealthMonitorMIBGroups 3 }
healthControlGroup OBJECT-GROUP
OBJECTS
{
healthSamplingInterval,
healthSamplingReset
}
STATUS current
DESCRIPTION
"Collection of objects which control operation of resource utilization sampling."
::= { alcatelIND1HealthMonitorMIBGroups 4 }
healthThreshGroup OBJECT-GROUP
OBJECTS
{
healthThreshDeviceRxLimit,
healthThreshDeviceRxTxLimit,
healthThreshDeviceMemoryLimit,
healthThreshDeviceCpuLimit,
healthThreshDeviceRxSecondaryLimit,
healthThreshDeviceRxTxSecondaryLimit,
healthThreshDeviceMemorySecondaryLimit,
healthThreshDeviceCpuSecondaryLimit,
healthThreshDeviceTempLimit,
healthThreshDeviceTempSecondaryLimit
}
STATUS current
DESCRIPTION
"Collection of threshold objects."
::= { alcatelIND1HealthMonitorMIBGroups 5 }
healthTrapObjectsGroup OBJECT-GROUP
OBJECTS
{
healthMonRxStatus,
healthMonRxTxStatus,
healthMonMemoryStatus,
healthMonCpuStatus,
healthMonCmmTempStatus,
healthMonCmmCpuTempStatus,
healthMonPrimaryFabricRxStatus,
healthMonPrimaryFabricRxTxStatus,
healthMonSecondaryFabricRxStatus,
healthMonSecondaryFabricRxTxStatus
}
STATUS current
DESCRIPTION
"Collection of objects which appear only in traps."
::= { alcatelIND1HealthMonitorMIBGroups 6 }
healthTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
healthMonDeviceTrap,
healthMonModuleTrap,
healthMonPortTrap,
healthMonIpcTrap
}
STATUS current
DESCRIPTION
"Collection of Traps for health monitoring."
::= { alcatelIND1HealthMonitorMIBGroups 7 }
healthSliceGroup OBJECT-GROUP
OBJECTS
{
healthSliceSlot,
healthSliceSlice,
healthSliceMemoryLatest,
healthSliceCpuLatest
}
STATUS current
DESCRIPTION
"Collection of slice-level health monitoring objects."
::= { alcatelIND1HealthMonitorMIBGroups 8 }
healthFabricGroup OBJECT-GROUP
OBJECTS
{
healthFabricPrimaryRxLatest,
healthFabricPrimaryRx1MinAvg,
healthFabricPrimaryRx1HrAvg,
healthFabricPrimaryRx1HrMax,
healthFabricPrimaryRxTxLatest,
healthFabricPrimaryRxTx1MinAvg,
healthFabricPrimaryRxTx1HrAvg,
healthFabricPrimaryRxTx1HrMax,
healthFabricSecondaryRxLatest,
healthFabricSecondaryRx1MinAvg,
healthFabricSecondaryRx1HrAvg,
healthFabricSecondaryRx1HrMax,
healthFabricSecondaryRxTxLatest,
healthFabricSecondaryRxTx1MinAvg,
healthFabricSecondaryRxTx1HrAvg,
healthFabricSecondaryRxTx1HrMax,
healthFabricPrimaryLink1RxLatest,
healthFabricPrimaryLink1Rx1MinAvg,
healthFabricPrimaryLink1Rx1HrAvg,
healthFabricPrimaryLink1Rx1HrMax,
healthFabricPrimaryLink1RxTxLatest,
healthFabricPrimaryLink1RxTx1MinAvg,
healthFabricPrimaryLink1RxTx1HrAvg,
healthFabricPrimaryLink1RxTx1HrMax,
healthFabricSecondaryLink1RxLatest,
healthFabricSecondaryLink1Rx1MinAvg,
healthFabricSecondaryLink1Rx1HrAvg,
healthFabricSecondaryLink1Rx1HrMax,
healthFabricSecondaryLink1RxTxLatest,
healthFabricSecondaryLink1RxTx1MinAvg,
healthFabricSecondaryLink1RxTx1HrAvg,
healthFabricSecondaryLink1RxTx1HrMax
}
STATUS current
DESCRIPTION
"Collection of fabric health monitoring objects."
::= { alcatelIND1HealthMonitorMIBGroups 9 }
END