mibs/nokia/ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB
ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB DEFINITIONS ::= BEGIN
IMPORTS
NOTIFICATION-TYPE,
MODULE-IDENTITY,
OBJECT-TYPE,
IpAddress, Unsigned32
FROM SNMPv2-SMI
DisplayString, MacAddress,TruthValue
FROM SNMPv2-TC
softentIND1Aip, aipAMAPTraps, aipGMAPTraps
FROM ALCATEL-IND1-BASE
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
;
alcatelIND1InterswitchProtocolMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Health Monitoring for dissemination of resource consumption information.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"Addressing discrepancies with Alcatel Standard."
::= { softentIND1Aip 1 }
alcatelIND1InterswitchProtocolMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1InterswitchProtocolMIB 1 }
aipGMAPconfig OBJECT IDENTIFIER ::= { alcatelIND1InterswitchProtocolMIBObjects 1 }
aipAMAPconfig OBJECT IDENTIFIER ::= { alcatelIND1InterswitchProtocolMIBObjects 2 }
aipLLDPConfig OBJECT IDENTIFIER ::= { alcatelIND1InterswitchProtocolMIBObjects 3 }
alcatelIND1InterswitchProtocolMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1InterswitchProtocolMIB 2 }
-- GMAP Configuration *********************
aipGMAPstate OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current state of the GMAP functionality."
::= { aipGMAPconfig 1 }
aipGMAPgaptime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time in milliseconds for gaps between successive GMAP
protocol packets."
::= { aipGMAPconfig 2 }
aipGMAPupdatetime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time in seconds between GMAP update packet generation."
::= { aipGMAPconfig 3 }
aipGMAPholdtime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time in minutes that the switch will remember
information received in GMAP update packets."
::= { aipGMAPconfig 4 }
-- GMAP Trap elements *********************
aipGMAPLastTrapReason OBJECT-TYPE
SYNTAX INTEGER {
authenticatedVlan (1),
conflictingBindingRule (2),
sameProtoDifferentVlansConflict (3),
sameVlanDifferentProtocolsConflict (4),
nonMobileVlan (5),
none (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reason for last GMAP update to not be applied. Valid
reasons are:
1 - Target Vlan is an authenticated vlan
2 - Update would conflict with a binding rule
3 - Update would create two different vlan entries
for the same protocol
4 - Update would create two different protocol entries
for the same vlan
5 - Target vlan is not mobile
6 - No trap has been sent"
::= { aipGMAPconfig 5 }
aipGMAPLastTrapPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifindex number of the last port on which the
GMAP change was not applied because of a conflict."
::= { aipGMAPconfig 6 }
aipGMAPLastTrapMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last MAC address for which a GMAP change was not
applied because of a conflict."
::= { aipGMAPconfig 7 }
aipGMAPLastTrapProtocol OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The protocol identifier of the last GMAP change that
was not applied because of a conflict."
::= { aipGMAPconfig 8 }
aipGMAPLastTrapVlan OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Vlan identifier of the last GMAP change that was
not applied because of a conflict."
::= { aipGMAPconfig 9 }
-- GMAP Trap *****************************
aipGMAPConflictTrap NOTIFICATION-TYPE
OBJECTS {
aipGMAPLastTrapReason,
aipGMAPLastTrapPort,
aipGMAPLastTrapMac,
aipGMAPLastTrapProtocol,
aipGMAPLastTrapVlan
}
STATUS current
DESCRIPTION
"A GMAP update conflict."
::= { aipGMAPTraps 0 1 }
-- GMAP Table *****************************
aipGMAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF AipGMAPTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "GMAP MAC address list."
::= { aipGMAPconfig 10 }
aipGMAPTableEntry OBJECT-TYPE
SYNTAX AipGMAPTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "GMAP MAC address list."
INDEX { aipGMAPMacAddr, aipGMAPProtocol }
::= { aipGMAPTable 1 }
AipGMAPTableEntry ::= SEQUENCE {
aipGMAPMacAddr MacAddress,
aipGMAPProtocol Unsigned32,
aipGMAPVlan INTEGER,
aipGMAPSrcSwitch MacAddress,
aipGMAPFlags OCTET STRING (SIZE(4)),
aipGMAPTimeout INTEGER
}
aipGMAPMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of a GMAP entry."
::= { aipGMAPTableEntry 1 }
aipGMAPProtocol OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The protocol identifier for a GMAP entry."
::= { aipGMAPTableEntry 2 }
aipGMAPVlan OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Vlan identifier for a GMAP entry."
::= { aipGMAPTableEntry 3 }
aipGMAPSrcSwitch OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of the switch that provided the
information for a GMAP entry."
::= { aipGMAPTableEntry 4 }
aipGMAPFlags OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The flags for a GMAP entry. The least significant byte
holds the router flags. The next byte contains the flags
from auto-tracker. The most significant 2 bytes are not
currently used."
::= { aipGMAPTableEntry 5 }
aipGMAPTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Seconds remaining before this entry will age out."
::= { aipGMAPTableEntry 6 }
-- GMAP Configuration end *********************
-- AMAP Configuration *********************
aipAMAPstate OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current state of the AMAP agent."
DEFVAL { active }
::= { aipAMAPconfig 1 }
aipAMAPdisctime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time in seconds for interval betweeen hello
packets in the initial discovery phase
of the AMAP protocol."
DEFVAL { 30 }
::= { aipAMAPconfig 2 }
aipAMAPcommontime OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time in seconds for the interval between hello
packets at other than the discovery phase."
DEFVAL { 300 }
::= { aipAMAPconfig 3 }
-- AMAP Trap elements *********************
aipAMAPLastTrapReason OBJECT-TYPE
SYNTAX INTEGER {
add (1),
change (2),
remove (3),
none (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reason for last change of port status. Valid
reasons are:
1 - port added
2 - change of information on existing port
3 - port deleted
4 - no trap has been sent"
::= { aipAMAPconfig 4 }
aipAMAPLastTrapPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifindex number of the port that most recently changed."
::= { aipAMAPconfig 5 }
-- AMAP Trap *********************
aipAMAPStatusTrap NOTIFICATION-TYPE
OBJECTS {
aipAMAPLastTrapReason,
aipAMAPLastTrapPort
}
STATUS current
DESCRIPTION
"An AMAP port status change and reason."
::= { aipAMAPTraps 0 1 }
-- AMAP Adjacency Tables *********************
aipAMAPportConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AipAMAPportConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "AMAP adjacent switch, local and remote connection index, and Vlan information."
::= { aipAMAPconfig 6 }
aipAMAPportConnectionentry OBJECT-TYPE
SYNTAX AipAMAPportConnectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "AMAP adjacent switch, local and remote connection index, and Vlan information."
INDEX { aipAMAPLocalConnectionIndex, aipAMAPRemMac,
aipAMAPRemConnectionIndex }
::= { aipAMAPportConnectionTable 1 }
AipAMAPportConnectionEntry ::= SEQUENCE {
aipAMAPLocalConnectionIndex INTEGER,
aipAMAPRemMac MacAddress,
aipAMAPRemConnectionIndex INTEGER,
aipAMAPRemVlan INTEGER,
aipAMAPRemHostname DisplayString (SIZE(0..32)),
aipAMAPLocalIfindex InterfaceIndex,
aipAMAPLocalSlot INTEGER,
aipAMAPLocalPort INTEGER,
aipAMAPRemSlot INTEGER,
aipAMAPRemPort INTEGER,
aipAMAPRemDeviceType INTEGER,
aipAMAPRemDevModelName DisplayString (SIZE(0..32)),
aipAMAPRemProductType INTEGER
}
aipAMAPLocalConnectionIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local index number of a connection in the local switch which has an
adjacent switch connected. This index is assigned to a connection by
the AMAP application running on the local switch."
::= { aipAMAPportConnectionentry 1 }
aipAMAPRemMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC Address of the CMM in the adjacent switch."
::= { aipAMAPportConnectionentry 2 }
aipAMAPRemConnectionIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote index number of the connection in the adjacent switch to which
the local switch has a connection connected. This index is assigned
to a connection by the AMAP application running on the adjacent switch."
::= { aipAMAPportConnectionentry 3 }
aipAMAPRemVlan OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote Vlan to which the connection is connected in the adjacent switch."
::= { aipAMAPportConnectionentry 4 }
aipAMAPRemHostname OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote hostname for the adjacent switch."
::= { aipAMAPportConnectionentry 5 }
aipAMAPLocalIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local ifindex of the port to which the connection is connected."
::= { aipAMAPportConnectionentry 6 }
aipAMAPLocalSlot OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local slot of the port to which the connection is connected."
::= { aipAMAPportConnectionentry 7 }
aipAMAPLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local interface port of the port to which the connection is
connected."
::= { aipAMAPportConnectionentry 8 }
aipAMAPRemSlot OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote slot of the port to which the connection is connected."
::= { aipAMAPportConnectionentry 9 }
aipAMAPRemPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote interface port of the port to which the connection is
connected."
::= { aipAMAPportConnectionentry 10 }
aipAMAPRemDeviceType OBJECT-TYPE
SYNTAX INTEGER {
unknownDevice (1),
omniSwitch7700 (2),
omniSwitch7800 (3),
omniSwitch9600 (4),
omniSwitch9700 (5),
omniSwitch9800 (6),
omniSwitch9600E (7),
omniSwitch9700E (8),
omniSwitch9800E (9),
omniSwitch8800 (10),
omniSwitch6624 (20),
omniSwitch6648 (21),
omniSwitch6624Fiber (22),
omniSwitch6624Ver2 (23),
omniSwitch6648Ver2 (24),
omniSwitch6824 (30),
omniSwitch6848 (31),
omniSwitch6824Fiber (32),
omniSwitch6850-24 (34),
omniSwitch6850-48 (35),
omniSwitch6850-24Fiber (36),
omniSwitch5slotXOS (40),
omniSwitch9slotXOS (41),
omniSwitchRouterXOS (42),
omniAccess408 (43),
omniAccess512 (44),
omniStack2032 (50),
omniStack4024 (51),
omniStack5024 (52),
omniStack6024 (53),
omniStack6048 (54),
omniStack6124 (55),
omniStack6148 (56),
omniStack8008 (57),
omniAccess210 (60),
omniAccess250 (61),
omniAccess280 (62),
ipPhone (70),
omniPCX4400 (71),
omniSwitch6855-14 (72),
omniSwitch6855-U10 (73),
omniSwitch6855-24 (74),
omniSwitch6855-U24 (75),
omniSwitch6424 (76),
omniSwitch6448 (77),
omniSwitch6424Fiber (78),
omniSwitch6855-U24X (79),
omniSwitch62508ME (80),
omniSwitch625024ME (81),
omniSwitch625024SMB (82),
omniSwitch6200-MIXED-STACK (214),
omniSwitch6224 (215),
omniSwitch6224P (216),
omniSwitch6248 (217),
omniSwitch6248P (218),
omniSwitch6224-DC (219),
omniSwitch6248-DC (220),
omniSwitch6212 (221),
omniSwitch6212P (222),
omniSwitch6224U (223),
omniSwitch6324 (227),
omniAccess5000 (249),
omniAccess4324 (250),
omniAccess4308 (251),
omniAccess6000 (252),
omniAccessAP60 (253),
omniAccessAP61 (254),
omniAccessAP70 (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of device seen on the port. "
::= { aipAMAPportConnectionentry 11 }
aipAMAPRemDevModelName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote device's model name (marketing name) for the adjacent switch."
::= { aipAMAPportConnectionentry 12 }
aipAMAPRemProductType OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
chassis (1),
stack (2),
accessPoint (3),
pcx (4),
ipPhone (5),
standAlone (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of product connected to remote end. e.g. chassis, stack, wireless acess point etc"
::= { aipAMAPportConnectionentry 13 }
aipAMAPhostsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AipAMAPHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "AMAP adjacent switch IP address information."
::= { aipAMAPconfig 7 }
aipAMAPHostentry OBJECT-TYPE
SYNTAX AipAMAPHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "AMAP adjacent switch IP address information."
INDEX { aipAMAPHostMac,
aipAMAPIpAddr }
::= { aipAMAPhostsTable 1 }
AipAMAPHostEntry ::= SEQUENCE {
aipAMAPHostMac MacAddress,
aipAMAPIpAddr IpAddress
}
aipAMAPHostMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC Address of the CMM in the adjacent switch."
::= { aipAMAPHostentry 1 }
aipAMAPIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An IP address of the adjacent switch."
::= { aipAMAPHostentry 2 }
aipAMAPVoiceVlan OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user configured VLAN value to be passed in AMAP pkt to neighbouring
bridges as voice vlan used for IP phones. If the value is 0 (zero) then
there is no voice vlan configured on the switch."
DEFVAL { 1 }
::= { aipAMAPconfig 8 }
-- AMAP configuration end *********************
aipLLDPConfigManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AipLLDPConfigManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that controls selection of LLDP management address
TLV instances to be transmitted on individual ports."
::= { aipLLDPConfig 1 }
aipLLDPConfigManAddrEntry OBJECT-TYPE
SYNTAX AipLLDPConfigManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP configuration information for a particular port
on which the local system management address instance will be transmitted."
INDEX { aipLLDPConfigManAddrPortNum }
::= { aipLLDPConfigManAddrTable 1 }
AipLLDPConfigManAddrEntry ::= SEQUENCE {
aipLLDPConfigManAddrPortNum InterfaceIndex,
aipLLDPConfigManAddrTlvTxEnable TruthValue
}
aipLLDPConfigManAddrPortNum OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port ifindex of the port associated with this entry."
::= { aipLLDPConfigManAddrEntry 1 }
aipLLDPConfigManAddrTlvTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object controls, on a per port basis, whether or not
management address TLV instances are transmitted. The value
true(1) means that management address TLVs are transmitted ;
the value false(2) means that they are not.The default value
for this object is false(2). "
DEFVAL { false }
::= { aipLLDPConfigManAddrEntry 2 }
-- AIP Conformance
alcatelIND1InterswitchProtocolMIBGroups OBJECT IDENTIFIER ::=
{ alcatelIND1InterswitchProtocolMIBConformance 1 }
alcatelIND1InterswitchProtocolMIBCompliances OBJECT IDENTIFIER ::=
{ alcatelIND1InterswitchProtocolMIBConformance 2 }
aipGMAPConfGroup OBJECT-GROUP
OBJECTS {
aipGMAPstate,
aipGMAPgaptime,
aipGMAPupdatetime,
aipGMAPholdtime,
aipGMAPLastTrapReason,
aipGMAPLastTrapPort,
aipGMAPLastTrapMac,
aipGMAPLastTrapProtocol,
aipGMAPLastTrapVlan,
aipGMAPMacAddr,
aipGMAPProtocol,
aipGMAPVlan,
aipGMAPSrcSwitch,
aipGMAPFlags,
aipGMAPTimeout
}
STATUS current
DESCRIPTION
"A collection of objects providing information about GMAP."
::= { alcatelIND1InterswitchProtocolMIBGroups 1 }
aipAMAPConfGroup OBJECT-GROUP
OBJECTS {
aipAMAPstate,
aipAMAPdisctime,
aipAMAPcommontime,
aipAMAPLastTrapReason,
aipAMAPLastTrapPort,
aipAMAPLocalConnectionIndex,
aipAMAPRemMac,
aipAMAPRemConnectionIndex,
aipAMAPRemVlan,
aipAMAPRemHostname,
aipAMAPVoiceVlan,
aipAMAPLocalIfindex,
aipAMAPLocalSlot,
aipAMAPLocalPort,
aipAMAPRemSlot,
aipAMAPRemPort,
aipAMAPHostMac,
aipAMAPIpAddr
}
STATUS current
DESCRIPTION
"A collection of objects providing information about AMAP."
::= { alcatelIND1InterswitchProtocolMIBGroups 2 }
aipNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { aipAMAPStatusTrap,
aipGMAPConflictTrap}
STATUS current
DESCRIPTION
"A collection of notifications for signaling AIP events."
::= { alcatelIND1InterswitchProtocolMIBGroups 3 }
alcatelIND1InterswitchProtocolMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of AIP."
MODULE
MANDATORY-GROUPS {
aipGMAPConfGroup,
aipAMAPConfGroup,
aipNotificationGroup
}
::= { alcatelIND1InterswitchProtocolMIBCompliances 1 }
END