mibs/nokia/ALCATEL-IND1-LBD-MIB
ALCATEL-IND1-LBD-MIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, Counter32, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
OBJECT-IDENTITY
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndex FROM IF-MIB
softentIND1Lbd, alaLbdTraps
FROM ALCATEL-IND1-BASE;
alcatelIND1LBDMIB MODULE-IDENTITY
LAST-UPDATED "200812100000Z"
ORGANIZATION "Alcatel - Architects Of An Internet World"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel Internetworking, Incorporated
(Division 1, Formerly XYLAN Corporation)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://www.ind.alcatel.com
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
LBD for detection loopback.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200812100000Z"
DESCRIPTION
"The LBD mib defines a set of LBD related management objects for ports
that support Loop Back Detection(LBD) mechanism.
LBD mechanism monitors the physical configuration of cables and detect when
a loopback detection exists due to any physical or logical problem. In case
such problem, it shall take appropriate measures for the port based upon the
configured mode of operation and raise a trap to the user."
::= { softentIND1Lbd 1}
-- --------------------------------------------------------------
alcatelIND1LBDMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Loopback-Detection Subsystem Managed Objects."
::= { alcatelIND1LBDMIB 1 }
alcatelIND1LBDMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for LBD Module MIB Subsystem Conformance Information."
::= { alcatelIND1LBDMIB 2 }
alcatelIND1LBDMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for LBD Module MIB Subsystem Units of Conformance."
::= { alcatelIND1LBDMIBConformance 1 }
alcatelIND1LBDMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for LBD Module MIB Subsystem Compliance Statements."
::= { alcatelIND1LBDMIBConformance 2 }
-- --------------------------------------------------------------
-- Texual Convention
-- --------------------------------------------------------------
AlaLbdPortConfigLbdOperStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specifies the current operational state of this port."
SYNTAX INTEGER {
inactive (0), -- Specifies that the operational state is inactive.
normal (1), -- Specifies that the operational state is normal.
shutdown (2) -- Specifies that the port is shutdown in state.
}
AlaLbdCurrentStateCVAorAR ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specifies the state of the port, where LBD was running, after
auto-recovery or issuing clear-violation-all."
SYNTAX INTEGER {
inactive (0), -- Specifies that the operational state is inactive.
normal (1) -- Specifies that the state is normal.
}
-- --------------------------------------------------------------
-- Global LBD Objects
-- LBD - Loop Back Detection
-- --------------------------------------------------------------
alaLbdGlobalConfigStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable LBD on the
switch. The value enable (1) indicates that LBD should be
enabled on the switch. The value disable (2) is used to
disable LBD on the switch."
DEFVAL { disable }
::= { alcatelIND1LBDMIBObjects 1 }
alaLbdGlobalConfigTransmissionTimer OBJECT-TYPE
SYNTAX Unsigned32 ( 5 .. 600 )
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the transmission timer for LBD
feature globally. It is allowed to modify the timer at any
instance but the new timer value will be effective from next
time the timer restarts."
DEFVAL { 30 }
::= { alcatelIND1LBDMIBObjects 2 }
alaLbdGlobalClearPortStat OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear statistics control for port for
LBD.
default(0) - default value for this object,
reset(1) - indicates that LBD should clear all statistic
counters related to all ports in the system."
DEFVAL { default }
::= { alcatelIND1LBDMIBObjects 3 }
alaLbdGlobalConfigAutorecoveryTimer OBJECT-TYPE
SYNTAX Unsigned32 ( 30 .. 86400 )
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to make up all the disabled ports which
was caused due to loop-back detection."
DEFVAL { 300 }
::= { alcatelIND1LBDMIBObjects 4 }
-- -------------------------------------------------------------
-- LBD Config Table on Physical Port
-- -------------------------------------------------------------
alaLbdPortConfig OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 5 }
alaLbdPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaLbdPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing LBD user port configuration information."
::= { alaLbdPortConfig 1 }
alaLbdPortConfigEntry OBJECT-TYPE
SYNTAX AlaLbdPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A LBD user port configuration entry."
INDEX { alaLbdPortConfigIfIndex }
::= { alaLbdPortConfigTable 1 }
AlaLbdPortConfigEntry ::= SEQUENCE {
alaLbdPortConfigIfIndex InterfaceIndex,
alaLbdPortConfigLbdAdminStatus INTEGER,
alaLbdPortConfigLbdOperStatus AlaLbdPortConfigLbdOperStatus
}
alaLbdPortConfigIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The physical identification number for this port."
::= { alaLbdPortConfigEntry 1 }
alaLbdPortConfigLbdAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable loopback-detection per port.
The value enable(1) indicates that loopback-detection is
enabled on this port. The value disable(2) indicates that
loopback-detection is disabled on this port.
The LBD configuration per port can be applied and retained,
irrespective of value of alaLbdGlobalConfigStatus, but the same shall
be functionally unavailable when alaLbdGlobalConfigStatus is set to
disable(2)."
DEFVAL { disable }
::= { alaLbdPortConfigEntry 2 }
alaLbdPortConfigLbdOperStatus OBJECT-TYPE
SYNTAX AlaLbdPortConfigLbdOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current operational state of the corresponding
port."
::= { alaLbdPortConfigEntry 3 }
-- --------------------------------------------------------------
-- Loop Back Detection Statistics Table
-- -- --------------------------------------------------------------
alaLbdPortStat OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 6 }
alaLbdPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaLbdPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Loop Back Detection information."
::= { alaLbdPortStat 1 }
alaLbdPortStatsEntry OBJECT-TYPE
SYNTAX AlaLbdPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A LBD Statistics entry on per port."
INDEX { alaLbdPortStatsIfIndex }
::= { alaLbdPortStatsTable 1 }
AlaLbdPortStatsEntry ::= SEQUENCE {
alaLbdPortStatsIfIndex InterfaceIndex,
alaLbdPortNumLbdInvalidRcvd Counter32,
alaLbdPortLbdSent Counter32,
alaLbdPortStatsClear INTEGER
}
alaLbdPortStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex of the port on which LBD is running."
::= { alaLbdPortStatsEntry 1 }
alaLbdPortNumLbdInvalidRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Invalid packets received by a port."
::= { alaLbdPortStatsEntry 2 }
alaLbdPortLbdSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of LBD packets sent by a port."
::= { alaLbdPortStatsEntry 3 }
alaLbdPortStatsClear OBJECT-TYPE
SYNTAX INTEGER {
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to reset(1), all statistics parameters
corresponding to this port gets cleared (reset)."
DEFVAL { default }
::= { alaLbdPortStatsEntry 4 }
-- --------------------------------------------------------------
-- Trap Description
-- --------------------------------------------------------------
alaLbdTrapsDesc OBJECT IDENTIFIER ::= { alaLbdTraps 1 }
alaLbdTrapsObj OBJECT IDENTIFIER ::= { alaLbdTraps 2 }
alaLbdTrapsRoot OBJECT IDENTIFIER ::= { alaLbdTrapsDesc 0 }
alaLbdStateChangeToShutdown NOTIFICATION-TYPE
OBJECTS {
alaLbdPortIfIndex,
alaLbdPreviousState,
alaLbdCurrentState
}
STATUS current
DESCRIPTION
"When the port state becomes shutdown, a notification is sent
to the Management Entity with the LBD-state
information."
::= { alaLbdTrapsRoot 1 }
alaLbdStateChangeForClearViolationAll NOTIFICATION-TYPE
OBJECTS {
alaLbdPortIfIndex,
alaLbdPreviousStateClearViolationAll,
alaLbdCurrentStateClearViolationAll
}
STATUS current
DESCRIPTION
"When the the port state changes from shutdown due to
clear-violation-all, a notification is sent to the Management
Entity, with the LBD-state information."
::= { alaLbdTrapsRoot 2 }
alaLbdStateChangeForAutoRecovery NOTIFICATION-TYPE
OBJECTS {
alaLbdPortIfIndex,
alaLbdPreviousStateAutoRecovery,
alaLbdCurrentStateAutoRecovery
}
STATUS current
DESCRIPTION
"When the port state changes from shutdown due to auto-recovery
mechanism, a notification is sent to the Management Entity
with the LBD-state information."
::= { alaLbdTrapsRoot 3 }
-- ----------------------------------------------------------------------
-- Trap Objects
-- -- ----------------------------------------------------------------------
alaLbdPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The ifIndex of the port on which LBD trap is raised"
::= { alaLbdTrapsObj 1 }
alaLbdPreviousState OBJECT-TYPE
SYNTAX INTEGER {
normal(1) -- Specifies that the operational state is normal.
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The previous state of the port on which LBD was running."
::= { alaLbdTrapsObj 2 }
alaLbdCurrentState OBJECT-TYPE
SYNTAX INTEGER {
shutdown (1) -- State is shutdown
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The current state of the port on which LBD was running."
::= { alaLbdTrapsObj 3 }
alaLbdPreviousStateClearViolationAll OBJECT-TYPE
SYNTAX INTEGER {
shutdown (1) -- State is shutdown
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The state of the the port where LBD was running
before clear-violation-all applied."
::= { alaLbdTrapsObj 4 }
alaLbdCurrentStateClearViolationAll OBJECT-TYPE
SYNTAX AlaLbdCurrentStateCVAorAR
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The state of the the port where LBD was running
after clear-violation-all applied."
::= { alaLbdTrapsObj 5 }
alaLbdPreviousStateAutoRecovery OBJECT-TYPE
SYNTAX INTEGER {
shutdown (1) -- State is shutdown
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The state of the the port where LBD was running
before auto-recovery."
::= { alaLbdTrapsObj 6 }
alaLbdCurrentStateAutoRecovery OBJECT-TYPE
SYNTAX AlaLbdCurrentStateCVAorAR
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The state of the the port where LBD was running
after auto-recovery."
::= { alaLbdTrapsObj 7 }
-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1LBDMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for LBD."
MODULE
MANDATORY-GROUPS
{
alaLbdGlobalConfigGroup,
alaLbdIntfConfigGroup,
alaLbdPortStatusGroup,
alaLbdStateTrapToShutdownGroup,
alaLbdStateTrapForClearViolationAllGroup,
alaLbdStateTrapForAutoRecoveryGroup
}
::= { alcatelIND1LBDMIBCompliances 1 }
-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------
alaLbdGlobalConfigGroup OBJECT-GROUP
OBJECTS
{
alaLbdGlobalConfigStatus,
alaLbdGlobalConfigTransmissionTimer,
alaLbdGlobalClearPortStat,
alaLbdGlobalConfigAutorecoveryTimer
}
STATUS current
DESCRIPTION
"Collection of objects for management of LBD Global Configuration."
::= { alcatelIND1LBDMIBGroups 1 }
alaLbdIntfConfigGroup OBJECT-GROUP
OBJECTS
{
alaLbdPortConfigLbdAdminStatus,
alaLbdPortConfigLbdOperStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of LBD per port Configuration."
::= { alcatelIND1LBDMIBGroups 2 }
alaLbdPortStatusGroup OBJECT-GROUP
OBJECTS
{
alaLbdPortNumLbdInvalidRcvd,
alaLbdPortLbdSent,
alaLbdPortStatsClear
}
STATUS current
DESCRIPTION
"Collection of objects for LBD Statistics information."
::= { alcatelIND1LBDMIBGroups 3 }
alaLbdStateTrapToShutdownGroup OBJECT-GROUP
OBJECTS
{
alaLbdPreviousState,
alaLbdCurrentState
}
STATUS current
DESCRIPTION
"Collection of objects for LBD State change to shutdown Traps ."
::= { alcatelIND1LBDMIBGroups 4 }
alaLbdStateTrapForClearViolationAllGroup OBJECT-GROUP
OBJECTS
{
alaLbdPreviousStateClearViolationAll,
alaLbdCurrentStateClearViolationAll
}
STATUS current
DESCRIPTION
"Collection of objects for LBD State Traps due to
issuing clear-violation-all."
::= { alcatelIND1LBDMIBGroups 5 }
alaLbdStateTrapForAutoRecoveryGroup OBJECT-GROUP
OBJECTS
{
alaLbdPreviousStateAutoRecovery,
alaLbdCurrentStateAutoRecovery
}
STATUS current
DESCRIPTION
"Collection of objects for LBD State Traps due to
auto-recovery mechanism."
::= { alcatelIND1LBDMIBGroups 6 }
-- -------------------------------------------------------------
END