mibs/nokia/ALCATEL-IND1-POLICY-MIB
ALCATEL-IND1-POLICY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
OBJECT-IDENTITY,
Counter32,
Integer32,
TimeTicks,
IpAddress FROM SNMPv2-SMI
RowStatus,
TEXTUAL-CONVENTION,
DisplayString FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
softentIND1Policy,
policyManagerTraps FROM ALCATEL-IND1-BASE;
--
-- Module Identity
--
alcatelIND1PolicyMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration and monitoring of policy manager parameters
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
::= { softentIND1Policy 1 }
--
-- Object roots used in this MIB
--
alcatelIND1PolicyMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for policy manager application objects"
::= { alcatelIND1PolicyMIB 1 }
alcatelIND1PolicyMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for policy manager application conformance information"
::= { alcatelIND1PolicyMIB 2 }
alcatelIND1PolicyMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for policy manager application units of conformance"
::= { alcatelIND1PolicyMIBConformance 1 }
alcatelIND1PolicyMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for policy manager application compliance statements"
::= { alcatelIND1PolicyMIBConformance 2 }
--
-- Textual Conventions
--
-- The policyEventCodes represents all possible policy events
PolicyEventCodes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The policyEventCodes TC describes all possible policy events
and should be used for NMS correlation."
SYNTAX INTEGER {
pyEventInitLog(1),
pyEventLdapInit(2),
pyEventLdapSearch(3),
pyEventTooManyRequests(4),
pyEventServerStateChange(5),
pyEventLdapSyntaxSourceAddr(6),
pyEventLdapSyntaxDestAddr(7),
pyEventLdapSyntaxInDSByte(8),
pyEventLdapSyntaxRecDSByte(9),
pyEventLdapSyntaxPVPMonth(10),
pyEventLdapSyntaxPVPDoW(11),
pyEventLdapSyntaxPVPToD(12),
pyEventLdapSyntaxPVPTime(13),
pyEventLdapSyntaxSPort(14),
pyEventLdapSyntaxDPort(15),
pyEventLdapReferenceTP(16),
pyEventLdapReferencePVP(17),
pyEventInternalCodeError(18),
pyEventLdapSelectError(19),
pyEventLdapReferenceXYLAN(20),
pyEventDebugMemoryAlloc(21),
pyEventDebugMemoryFree(22),
pyEventPolicyCacheFlushed(23),
pyEventLdapServerDefined(24),
pyEventLdapSyntaxSourceMACAddr(25),
pyEventLdapSyntaxDestMACAddr(26),
pyEventLdapServerDeleted(27),
pyEventOptimizedPvpMonth(28),
pyEventOptimizedPvpDoW(29),
pyEventZeroPvpMonth(30),
pyEventZeroPvpDoW(31),
pyEventRuleScope(32),
pyEventRuleActivated(33),
pyEventRuleDeactivated(34),
pyEventLdapReferenceIPFilter(35),
pyEventLdapSyntaxTOSByte(36),
pyEventTimeChangeDetected(37),
pyEventPolicyWillNeverBeValid(38),
pyEventLdapSetOption(39),
pyEventLdapTLSChannelInit(40),
pyEventLdapTLSParametersOK(41),
pyEventMaxPolicyCountReached(42),
pyEventMemoryError(43),
pyEventMonitorSocketError(44),
pyEventDispositionError(45),
pyEventNameLengthError(46),
pyEventTableResize(47),
pyEvent48(48),
pyEvent49(49),
pyEvent50(50),
pyEvent51(51),
pyEvent52(52),
pyEvent53(53),
pyEvent54(54),
pyEvent55(55),
pyEvent56(56),
pyEvent57(57),
pyEventPolicyCacheLoaded(58)
}
--
-- Global parameters
--
serverPolicyDecision OBJECT-TYPE
SYNTAX INTEGER {
flushPolicies(0),
recachePolicies(1),
recacheQMMACGroup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows an NMS application to influence the policy
manager's treatment of existing policy decisions that were
established by the policy manager. By setting recachePolicies,
an NMS can cause the policy manager to reload all its policies from the
current primary LDAP server. By setting flushPolicies, all the policies
are deleted by the policy manager."
::= { alcatelIND1PolicyMIBObjects 1 }
rsvpDefaultPolicy OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
deny(2)
}
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object allows an NMS application to define the agent action
when there are no policy servers available to a switch. When
this object is set to accept(1), the policy manager in the switch
will allow all RSVP control message requests. When set to deny(2),
the policy manager will deny all RSVP control message requests."
::= { alcatelIND1PolicyMIBObjects 2 }
policyManagerEventTableSize OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the size of the policy manager event table.
When this object is set, the subagent adjusts the event table to
meet the size defined."
DEFVAL { 50 }
::= { alcatelIND1PolicyMIBObjects 3 }
--
-- The directoryServerTable provides an NMS with the ability to define and
-- control what directory servers a switch can access. The object
-- directoryServerRowStatus provides a uniform way to create and remove
-- rows (entries) of the table. The NMS can define switch access to use via
-- authenticated or unauthenticated LDAP bind operations
-- (via directoryServerAuthenticationType) and their appropriate parameters
--
directoryServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF DirectoryServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information related to the LDAP-based
directory server from the perspective of the policy manager."
::= { alcatelIND1PolicyMIBObjects 4 }
directoryServerEntry OBJECT-TYPE
SYNTAX DirectoryServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the directory server table. Each entry
represents a directory server instance to the policy manager."
INDEX {directoryServerAddress, directoryServerPort}
::= {directoryServerTable 1}
DirectoryServerEntry ::= SEQUENCE {
directoryServerAddress
IpAddress,
directoryServerPort
Integer32 (0..65535),
directoryServerPreference
Integer32 (0..255),
directoryServerAuthenticationType
INTEGER,
directoryServerUserId
DisplayString (SIZE(0..31)),
directoryServerPassword
DisplayString (SIZE(0..31)),
directoryServerPublicKey
Integer32,
directoryServerSearchbase
DisplayString (SIZE(0..31)),
directoryServerCacheChange
INTEGER,
directoryServerLastChange
TimeTicks,
directoryServerAdminStatus
INTEGER,
directoryServerOperStatus
INTEGER,
directoryServerRowStatus
RowStatus,
directoryServerEnableSSL
INTEGER
}
directoryServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of an LDAP server. The policy manager uses this
object combined with the directory server port number to uniquely
identify an LDAP server to use for directory queries and updates."
::= {directoryServerEntry 1}
directoryServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the TCP port number, which, along with the
directory server IP address, identifies the LDAP server."
DEFVAL { 389 }
::= {directoryServerEntry 2}
directoryServerPreference OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the relative preference of the server
entry. The higher the value of this object, the greater the
preference the policy manager places on using this server for
LDAP queries. This object is used when the policy manager uses
server selection based on the configured preference."
DEFVAL { 0 }
::= {directoryServerEntry 3}
directoryServerAuthenticationType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
simplePassword(1)--,
-- kerberos(2),
-- publicKey(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies what authentication
mechanism the LDAP server expects. For simplePassword(1),
the policy manager uses the directoryServerPassword object
for each LDAP query. kerberos and publicKey mechanisms are
currently unsupported. The none(0) value directs the policy
manager to use the 'anonymous' method for LDAP queries."
DEFVAL { none }
::= {directoryServerEntry 4}
directoryServerUserId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object only has significance when the
directoryServerAuthenticationType has a value of
simplePassword(1). This simple display string is used by the
policy manager in LDAP queries and updates."
::= {directoryServerEntry 5}
directoryServerPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object only has significance when the
directoryServerAuthenticationType has a value of
simplePassword(1). This simple display string is used by the
policy manager in LDAP queries and updates."
::= {directoryServerEntry 6}
directoryServerPublicKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object only has significance when the
directoryServerAuthenticationType has a value of
publicKey(3), which is not a currently supported value"
::= {directoryServerEntry 7}
directoryServerSearchbase OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the base object required for
LDAP search operations. This object represents, in
distinguished name format, the point where server
searches start. Generally, this object represents
the base object of the organization."
DEFVAL { "o=Alcatel IND, c=US" }
::= {directoryServerEntry 8}
directoryServerCacheChange OBJECT-TYPE
SYNTAX INTEGER {
none(0),
recachePolicy(1)--,
-- recacheAll(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows an NMS application to influence the policy
manager's cache of policy-related data when this server becomes
the primary LDAP server selected for the switch. Setting this object
to recachePolicy(1) conveys to the policy manager that the
policy class object should be obtained from the LDAP server
represented by this table entry when this server becomes the
primary LDAP server. By setting this object to 'none', the
policy manager will use the existing policy and policy rule
cache rather than reloading the policy data from this server.
In the case where there is no policy cache (for instance, when
the switch powers up) the policy manager will attempt to reload
the policy class cache even if this object is set to 'none'. "
DEFVAL { none }
::= {directoryServerEntry 9}
directoryServerLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime at the time of
the last creation, deletion or modification of an object in
this table entry."
::= {directoryServerEntry 10}
directoryServerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the desired administrative state of
the directory server. The up and down states control the
policy manager's decision to user the server for LDAP queries
and updates."
DEFVAL { up }
::= {directoryServerEntry 11}
directoryServerOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
unknown(3)--,
-- testing(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the current operational state of the
LDAP server. Semantics of this object closely resemble the
ifOperStatus definition, however, the LDAP application layer
is NOT modeled as an interface as defined by RFC2233."
DEFVAL { unknown }
::= {directoryServerEntry 12}
directoryServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to create a new table entry or modify
or delete an existing table entry in this table."
DEFVAL { createAndGo }
::= {directoryServerEntry 13}
directoryServerEnableSSL OBJECT-TYPE
SYNTAX INTEGER {
enableSSL(1),
disableSSL(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables SSL for the LDAP server."
DEFVAL { 0 }
::= {directoryServerEntry 14}
--
-- policyEventTable
--
policyEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolicyEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains significant events related to the
operation of the policy manager. "
::= { alcatelIND1PolicyMIBObjects 5}
policyEventEntry OBJECT-TYPE
SYNTAX PolicyEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the policy manager event table."
INDEX { policyEventIndex }
::= {policyEventTable 1}
PolicyEventEntry ::= SEQUENCE {
policyEventIndex
Integer32 (0..1000),
policyEventCode
PolicyEventCodes,
policyEventDetailString
DisplayString (SIZE(0..255)),
policyEventTime
TimeTicks
}
policyEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object uniquely identifies the event record."
::= {policyEventEntry 1}
policyEventCode OBJECT-TYPE
SYNTAX PolicyEventCodes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the event that occurred. The internal
protocol error and LDAP error events are rollup events that
represent a collection of events with similar characteristics.
The internal error event occurs due to software resource or
logic problems; the LDAP error occurs because of LDAP init,
search, format, protocol or other similar errors."
::= {policyEventEntry 2}
policyEventDetailString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives details about the event that took place.
Included in the string are (potentially) fields that provide
more specific fault location and isolation, context resolution,
and event (error) instance information."
::= {policyEventEntry 3}
policyEventTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime at the time
the event occurred."
::= {policyEventEntry 4}
--
-- The rule names table provides confirmation to an element manager
-- that policy rules are loaded on a switch.
--
policyRuleNamesTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolicyRuleNamesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information that identifies the LDAP-based
policy rules defined on a directory server that are pushed by
the policy manager to the QoS&F manager for making policy decisions."
::= { alcatelIND1PolicyMIBObjects 6}
policyRuleNamesEntry OBJECT-TYPE
SYNTAX PolicyRuleNamesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the policy rules table. Each entry represents the
name of a policy rule on the directory server. The policy manager
uses these names to build the correct policy rules."
INDEX {policyRuleNamesIndex}
::= {policyRuleNamesTable 1}
PolicyRuleNamesEntry ::= SEQUENCE {
policyRuleNamesIndex
Integer32 (0..65535),
policyRuleNamesName
DisplayString (SIZE(0..31)),
policyRuleNamesRowStatus
RowStatus,
policyRuleOperStatus
INTEGER
}
policyRuleNamesIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a unique index identifying the policyRuleNames entry."
::= { policyRuleNamesEntry 1 }
policyRuleNamesName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the name of the policyRule that the policy manager
will use to build a switch policy. The name coincides with the directory
server class name equivalent."
::= { policyRuleNamesEntry 2 }
policyRuleNamesRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated (to avoid proliferation of control planes) - rules
to be changed should be updated in LDAP and flushed/pushed to
switches accordingly."
DEFVAL { active }
::= { policyRuleNamesEntry 3 }
policyRuleOperStatus OBJECT-TYPE
SYNTAX INTEGER {
-- mip_def_values.h : MIP_ROW_STATUS_VALUES.ROWSTATUS_*
-- and these should stay in agreement
up(1),
down(2), -- invalid, POLICY_INVALID, NotInService
notReady(3) -- eg; pending PVP (POLICY ! _INVALID but ! _ACTIVE)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to convey to an NMS the state of the policy.
A value of 'up' implies that the policy rule has been pushed to
the QoS / filtering manager (i.e. the PEP). A value of 'down'
means the policy is invalid, so it was not pushed to the
QoS / filtering manager. A value of 'notReady' means this
rule is valid, but not currently active (PVP not active, etc)."
DEFVAL { up }
::= { policyRuleNamesEntry 4 }
--
-- policyStatsTable
--
policyStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolicyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the objects maintained by the policy manager
representing statistics available on a per policy server instance.
The objects in this table correspond directly to the similarly named
objects in <draft-white-slapm-mib-00.txt>, except that the objects in
the draft are scalars. Note that the I-D is now RFC 2758, and experimental
category RFC.
There are semantic differences from RFC 2758 for some objects - the
differences are detailed in the DESCRIPTION clauses. Some objects
behave differently from the RFC because of our combined PDP/PEP
implementation. Note that RFC 2758 applies to hosts more than switches."
::= { alcatelIND1PolicyMIBObjects 7 }
policyStatsEntry OBJECT-TYPE
SYNTAX PolicyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the policy manager stats table."
INDEX {policyStatsAddress, policyStatsServerPort }
::= {policyStatsTable 1}
PolicyStatsEntry ::= SEQUENCE {
policyStatsAddress
IpAddress,
policyStatsServerPort
Integer32 (0..65535),
policyStatsQueryCount
Counter32,
policyStatsAccessCount
Counter32,
policyStatsSuccessAccessCount
Counter32,
policyStatsNotFoundCount
Counter32
}
policyStatsAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the policy server related to these statistics"
::= { policyStatsEntry 1 }
policyStatsServerPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TCP port number of the policy server related to these statistics"
::= { policyStatsEntry 2 }
policyStatsQueryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The query count gives the total number of times a policy repository
was queried by the policy decision point. The policy repository is the LDAP
server where policies are stored."
::= { policyStatsEntry 3 }
policyStatsAccessCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of times that a policy repository was
accessed with respect to a policy agent. The policy decision
point (PDP) in this implementation accesses the repository via
LDAP. The access count includes all operations required to
access the policy rules (including role evaluations and discrete
policy entry accesses.)
The value of this object will increment on repository access."
::= { policyStatsEntry 4 }
policyStatsSuccessAccessCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful policy repository accesses. This
value increments if a 'known' attribute has been discovered in
a repository search, regardless of its PDP processing status.
This object will increment less than policyStatsAccessCount
on most repository accesses, based on repository structure
and what roles match the policy decision point."
::= { policyStatsEntry 5 }
policyStatsNotFoundCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of policy repository accesses that resulted
in an entry not being located. Not found counts increment on
protocol search failures and other attribute lookup problems.
Generally, policyStatsNotFoundCount increments only in
error cases."
::= { policyStatsEntry 6 }
--
-- The policyNotificationTable allows an NMS to control notifications produced
-- by switch software. This table allows an NMS to "zone in" on problems
-- by singling out specific events as part of a pro-active monitoring strategy
-- by the NMS application.
--
policyNotificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PolicyNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains an association between an event ID and the
notification method that the policy manager uses to convey to an
NMS that the event occurred. "
::= { alcatelIND1PolicyMIBObjects 8 }
policyNotificationEntry OBJECT-TYPE
SYNTAX PolicyNotificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the policy manager notification table."
INDEX { policyNotificationIndex }
::= {policyNotificationTable 1}
PolicyNotificationEntry ::= SEQUENCE {
policyNotificationIndex
PolicyEventCodes,
policyNotificationCode
INTEGER,
policyEventCount
Counter32
}
policyNotificationIndex OBJECT-TYPE
SYNTAX PolicyEventCodes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a unique index identifying the policyNotification entry.
This index corresponds to the same value as the policyEvent."
::= { policyNotificationEntry 1 }
policyNotificationCode OBJECT-TYPE
SYNTAX INTEGER {
noNotification(0),
writeToLog(1),
sendTrap(2),
logAndTrap(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the notification method used to convey information
about switch events to the NMS. The notification code allows for
multiple notification methods, updated by an NMS by setting the
appropriate method corresponding to the event index."
::= { policyNotificationEntry 2 }
policyEventCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of times that this event was recognized. This value
increments for each event occurance. No advertised management
facility exists to clear these history counters. This object is
intended to be a hint to management applications as to the past
operating history of a switch even if entries are no longer
present in the policyEventTable."
::= { policyNotificationEntry 3 }
policyManagerSwitchIdentifier OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object type identifies the switch
with a identifier that is unique through out the network
This identifier is stored on the switch and the Directory
Server for policies that are specific to this switch.
If this variable is changed on the switch then the Directory
Server also must be changed correspondingly.
Changing the variable on the switch and not making the
corresponding change on the Directory Server will render the
policies defined for this switch unusable.The syntax of this
variable is macAddress:Date:Time.
Example: xx:xx:xx:xx:xx:xx:yyyymmdd:hhmmss "
::= { alcatelIND1PolicyMIBObjects 9 }
--
-- Traps definitions
--
policyManagerTrapDesc OBJECT IDENTIFIER ::= { policyManagerTraps 1 }
policyManagerTrapObjs OBJECT IDENTIFIER ::= { policyManagerTraps 2 }
--
-- Trap description
--
policyEventNotification NOTIFICATION-TYPE
OBJECTS {
policyTrapEventDetailString,
policyTrapEventCode
}
STATUS current
DESCRIPTION
"The policyEventNotification allows the switch to notify an NMS when
significant events happen. The NMS can then investigate and perform
appropriate control functions. Other tables allow the NMS app to
zone in on the problem as part of a proactive monitoring system by the
NMS application. "
::= { policyManagerTrapDesc 0 1 }
--
-- Trap objects
--
policyTrapEventDetailString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Details about the event that took place"
::= { policyManagerTrapObjs 1 }
policyTrapEventCode OBJECT-TYPE
SYNTAX PolicyEventCodes
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The code of the event"
::= { policyManagerTrapObjs 2 }
--
-- compliance statements
--
alcatelIND1PolicyMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The policy manager compliance statement"
MODULE -- this module
MANDATORY-GROUPS {
policyMIBGlobalGroup,
policyMIBDirectoryServerGroup,
policyMIBEventTableGroup,
policyMIBRuleNamesGroup,
policyMIBStatsGroup,
policyMIBNotificationGroup
}
::= { alcatelIND1PolicyMIBCompliances 1 }
--
-- units of conformance
--
policyMIBGlobalGroup OBJECT-GROUP
OBJECTS {
serverPolicyDecision,
policyManagerEventTableSize
}
STATUS current
DESCRIPTION
"A collection of objects providing information on global
policy manager state"
::= { alcatelIND1PolicyMIBGroups 1 }
policyMIBDirectoryServerGroup OBJECT-GROUP
OBJECTS {
directoryServerAddress,
directoryServerPort,
directoryServerPreference,
directoryServerAuthenticationType,
directoryServerUserId,
directoryServerPassword,
directoryServerSearchbase,
directoryServerCacheChange,
directoryServerLastChange,
directoryServerAdminStatus,
directoryServerOperStatus,
directoryServerRowStatus,
directoryServerEnableSSL
}
STATUS current
DESCRIPTION
"A collection of objects for managing LDAP directory
servers"
::= { alcatelIND1PolicyMIBGroups 2 }
policyMIBEventTableGroup OBJECT-GROUP
OBJECTS {
policyEventIndex,
policyEventCode,
policyEventDetailString,
policyEventTime
}
STATUS current
DESCRIPTION
"A collection of objects detailling the events that
occurred during policy manager operation"
::= { alcatelIND1PolicyMIBGroups 3 }
policyMIBRuleNamesGroup OBJECT-GROUP
OBJECTS {
policyRuleNamesIndex,
policyRuleNamesName,
policyRuleNamesRowStatus,
policyRuleOperStatus
}
STATUS current
DESCRIPTION
"A collection of object to know which policy rules have
been retrieved from a directory server"
::= { alcatelIND1PolicyMIBGroups 4 }
policyMIBStatsGroup OBJECT-GROUP
OBJECTS {
policyStatsAddress,
policyStatsServerPort,
policyStatsAccessCount,
policyStatsSuccessAccessCount,
policyStatsNotFoundCount
}
STATUS current
DESCRIPTION
"A collection of object to keep a trace of how directory
servers are accessed by the policy manager"
::= { alcatelIND1PolicyMIBGroups 5 }
policyMIBNotificationGroup OBJECT-GROUP
OBJECTS {
policyNotificationIndex,
policyNotificationCode,
policyEventCount
}
STATUS current
DESCRIPTION
"A collection of object to configure what the policy manager
must do when specific events happen"
::= { alcatelIND1PolicyMIBGroups 6 }
policyMIBTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
policyEventNotification
}
STATUS current
DESCRIPTION
"Collection of traps for management of Policy Manager"
::= { alcatelIND1PolicyMIBGroups 7 }
END