mibs/nokia/ALCATEL-IND1-ROUTEMAP-MIB
ALCATEL-IND1-ROUTEMAP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION, DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
routingIND1Iprm
FROM ALCATEL-IND1-BASE ;
alcatelIND1RouteMapMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of IP Route Maps global configuration
parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200704030000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { routingIND1Iprm 3 }
alcatelIND1RouteMapMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIB 1 }
alaRouteMapConfig OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIBObjects 1 }
-- Textual Convention
AlaRouteMapType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The set of Route Map Match and Route Map Set Elements."
SYNTAX INTEGER {
matchIpAccesList(1),
matchIpAddress(2),
matchIpNextHopAccessList(3),
matchIpNextHopAddress(4),
matchIpv6AccessList(5),
matchIpv6Address(6),
matchIpv6nExtHopAccessList(7),
matchIpv6NextHopAddress(8),
matchTag(9),
matchIpv4Interface(10),
matchIpv6Interface(11),
matchMetric(12),
matchRouteType(13),
setMetric(129),
setMetricType(130),
setTag(131),
setCommunity(132),
setLocalPreference(133),
setLevel(134),
setIpNexthop(135),
setIpv6Nexthop(136)
}
AlaRouteMapAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Determines whether a Route Map or Access List address
should be permitted or denied."
SYNTAX INTEGER {
permit(1),
deny(2)
}
AlaRouteMapRedistControl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"allSubnets matches all subnets of this prefix. noSubnets
only matches the exact prefix. aggregate matches all subnets
of the prefix, but only redistributes the prefix."
SYNTAX INTEGER {
allSubnets(1),
noSubnets(2),
aggregate(3)
}
-- route redistribution table
alaRouteMapRedistProtoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRouteMapRedistProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol based configuration for route redistribution."
::= { alaRouteMapConfig 1 }
alaRouteMapRedistProtoEntry OBJECT-TYPE
SYNTAX AlaRouteMapRedistProtoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the source protocol and Route Map to be matched
for route redistribution. If the route matches one of the source
protocols Route Maps, and the Route Map is of type permit, then
the route will be redistributed to the destination protocol."
INDEX {
alaRouteMapRedistSrcProtoId,
alaRouteMapRedistDestProtoId,
alaRouteMapRedistRouteMapIndex
}
::= { alaRouteMapRedistProtoTable 1 }
AlaRouteMapRedistProtoEntry ::= SEQUENCE {
alaRouteMapRedistSrcProtoId INTEGER,
alaRouteMapRedistDestProtoId INTEGER,
alaRouteMapRedistRouteMapIndex Unsigned32,
alaRouteMapRedistStatus INTEGER,
alaRouteMapRedistAddressType InetAddressType,
alaRouteMapRedistRowStatus RowStatus
}
alaRouteMapRedistSrcProtoId OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified
local(2), -- local interfaces
static(3), -- static routes
rip(4), -- Routing Information Protocol
ospf(5), -- Open Shortest Path First
bgp(6), -- Border Gateway Protocol
ripng(7), -- Routing Information Protocol Next Generation
ospfv3(8), -- Open Shortest Path First Version 3
bgp6(9), -- Border Gateway Protocol IPv6
isis(10), -- ISIS IPv4
isis6(11) -- ISIS IPv6
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source protocol of the route to be redistributed."
DEFVAL { other }
::= { alaRouteMapRedistProtoEntry 1 }
alaRouteMapRedistDestProtoId OBJECT-TYPE
SYNTAX INTEGER {
rip(1), -- Routing Information Protocol
ospf(2) , -- Open Shortest Path First
bgp(3), -- Border Gateway Protocol
ripng(4), -- Routing Information Protocol Next Generation
ospfv3(5), -- Open Shortest Path First Version 3
bgp6(6), -- Border Gateway Protocol
isis(7), -- ISIS IPv4
isis6(8) -- ISIS IPv6
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol that a route is distributed into."
::= { alaRouteMapRedistProtoEntry 2 }
alaRouteMapRedistRouteMapIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index indicating Route Map to use for redistribution match.
In the destroy case the value 0 indicates all route-maps."
::= { alaRouteMapRedistProtoEntry 3 }
alaRouteMapRedistStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1), -- if Route Map matches, redistribute
disable(2) -- if Route Map matches, do not redistribute
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the reditribution of routes into
the specified protocol."
DEFVAL { enable }
::= { alaRouteMapRedistProtoEntry 4 }
alaRouteMapRedistAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the source and destination protocols.
The set is constrained to ipv4 and ipv6."
::= { alaRouteMapRedistProtoEntry 5 }
alaRouteMapRedistRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { alaRouteMapRedistProtoEntry 6 }
-- access-list name table
alaRouteMapAccessListNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRouteMapAccessListNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Access List name to Access List bindings."
::= { alaRouteMapConfig 2 }
alaRouteMapAccessListNameEntry OBJECT-TYPE
SYNTAX AlaRouteMapAccessListNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry binds an Access List Name to an Access List index."
INDEX {
alaRouteMapAccessListName
}
::= { alaRouteMapAccessListNameTable 1 }
AlaRouteMapAccessListNameEntry ::= SEQUENCE {
alaRouteMapAccessListName DisplayString,
alaRouteMapAccessListNameIndex Unsigned32,
alaRouteMapAccessListNameAddressType InetAddressType,
alaRouteMapAccessListNameRowStatus RowStatus
}
alaRouteMapAccessListName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of an Access List."
::= { alaRouteMapAccessListNameEntry 1 }
alaRouteMapAccessListNameIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with the Access List name."
::= { alaRouteMapAccessListNameEntry 2 }
alaRouteMapAccessListNameAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in this Access List. The set is
constrained to ipv4 and ipv6."
::= { alaRouteMapAccessListNameEntry 3 }
alaRouteMapAccessListNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { alaRouteMapAccessListNameEntry 4 }
-- access-list
alaRouteMapAccessListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRouteMapAccessListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all Access Lists configured on the switch."
::= { alaRouteMapConfig 3 }
alaRouteMapAccessListEntry OBJECT-TYPE
SYNTAX AlaRouteMapAccessListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry identifies an IPv4 or IPv6 address or subnet to
match for route redistribution."
INDEX {
alaRouteMapAccessListIndex,
alaRouteMapAccessListAddressType,
alaRouteMapAccessListAddress,
alaRouteMapAccessListPrefixLength
}
::= { alaRouteMapAccessListTable 1 }
AlaRouteMapAccessListEntry ::= SEQUENCE {
alaRouteMapAccessListIndex Unsigned32,
alaRouteMapAccessListAddressType InetAddressType,
alaRouteMapAccessListAddress InetAddress,
alaRouteMapAccessListPrefixLength Unsigned32,
alaRouteMapAccessListRedistControl AlaRouteMapRedistControl,
alaRouteMapAccessListAction AlaRouteMapAction,
alaRouteMapAccessListRowStatus RowStatus
}
alaRouteMapAccessListIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with the Access List name."
::= { alaRouteMapAccessListEntry 1 }
alaRouteMapAccessListAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of address in this Access List Table Entry.
The set is constrained to ipv4 and ipv6."
::= { alaRouteMapAccessListEntry 2 }
alaRouteMapAccessListAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv4 or IPv6 address associated with this access list entry.
The type is identified by alaRouteMapAccessListAddressType."
::= { alaRouteMapAccessListEntry 3 }
alaRouteMapAccessListPrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix length in bits of the IPv4 or IPv6 address
associated with this Access List entry. The maximum
for IPv4 is 32."
::= { alaRouteMapAccessListEntry 4 }
alaRouteMapAccessListRedistControl OBJECT-TYPE
SYNTAX AlaRouteMapRedistControl
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls how a route is matched and redistributed.
allSubnets matches all subnets of the prefix. noSubnets
only matches the exact prefix. aggregate matches all subnets
of the prefix, but only redistributes the prefix."
::= { alaRouteMapAccessListEntry 5 }
alaRouteMapAccessListAction OBJECT-TYPE
SYNTAX AlaRouteMapAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether an address should be redistributed or
denied, if an Access list entry is matched."
::= { alaRouteMapAccessListEntry 6 }
alaRouteMapAccessListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { alaRouteMapAccessListEntry 7 }
-- route map name table
alaRouteMapNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRouteMapNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing Route Map name to Route Map index bindings."
::= { alaRouteMapConfig 4 }
alaRouteMapNameEntry OBJECT-TYPE
SYNTAX AlaRouteMapNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry binds a Route Map Name to a Route Map index."
INDEX {
alaRouteMapName
}
::= { alaRouteMapNameTable 1 }
AlaRouteMapNameEntry ::= SEQUENCE {
alaRouteMapName DisplayString,
alaRouteMapNameIndex Unsigned32,
alaRouteMapNameRowStatus RowStatus
}
alaRouteMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a Route Map."
::= { alaRouteMapNameEntry 1 }
alaRouteMapNameIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with the Route Map name."
::= { alaRouteMapNameEntry 2 }
alaRouteMapNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { alaRouteMapNameEntry 3 }
-- sequence table
alaRouteMapSequenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRouteMapSequenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table binds a sequence to a Route Map."
::= { alaRouteMapConfig 5 }
alaRouteMapSequenceEntry OBJECT-TYPE
SYNTAX AlaRouteMapSequenceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry binds a Route Map and a Sequence."
INDEX {
alaRouteMapSequenceIndex,
alaRouteMapSequenceNumber
}
::= { alaRouteMapSequenceTable 1 }
AlaRouteMapSequenceEntry ::= SEQUENCE {
alaRouteMapSequenceIndex Unsigned32,
alaRouteMapSequenceNumber Unsigned32,
alaRouteMapSequenceAction AlaRouteMapAction,
alaRouteMapSequenceRowStatus RowStatus
}
alaRouteMapSequenceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Route Map Index."
::= { alaRouteMapSequenceEntry 1 }
alaRouteMapSequenceNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Sequence Number indicating the position of sequences
with the same Route Map index."
DEFVAL { 50 }
::= { alaRouteMapSequenceEntry 2 }
alaRouteMapSequenceAction OBJECT-TYPE
SYNTAX AlaRouteMapAction
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls whether a sequence, if matched, should be redistributed or
denied."
::= { alaRouteMapSequenceEntry 3 }
alaRouteMapSequenceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { alaRouteMapSequenceEntry 4 }
-- route map table
alaRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol based configuration for route redistribution."
::= { alaRouteMapConfig 6 }
alaRouteMapEntry OBJECT-TYPE
SYNTAX AlaRouteMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry describes a match or set clause in a Route Map."
INDEX {
alaRouteMapIndex,
alaRouteMapSequence,
alaRouteMapType,
alaRouteMapValue
}
::= { alaRouteMapTable 1 }
AlaRouteMapEntry ::= SEQUENCE {
alaRouteMapIndex Unsigned32,
alaRouteMapSequence Unsigned32,
alaRouteMapType AlaRouteMapType,
alaRouteMapValue DisplayString,
alaRouteMapRowStatus RowStatus
}
alaRouteMapIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with the Route Map name."
::= { alaRouteMapEntry 1 }
alaRouteMapSequence OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number."
DEFVAL { 50 }
::= { alaRouteMapEntry 2 }
alaRouteMapType OBJECT-TYPE
SYNTAX AlaRouteMapType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of match or set command in this entry. Route Map
rows with the same Route Map Name, Sequence Number and
Match/Set Type form a group. An entry within the group is
uniquely identified by this Route Map Table object. Any
match within the group is considered a successful match
for the entire group, and matching will continue with the
next group."
::= { alaRouteMapEntry 3 }
alaRouteMapValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The string following the match or set keyword in a
Route Map CLI command."
::= { alaRouteMapEntry 4 }
alaRouteMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls creation and deletion of Row Status entries."
::= { alaRouteMapEntry 5 }
-- conformance information
alcatelIND1RouteMapMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1RouteMapMIB 2 }
alcatelIND1RouteMapMIBCompliances OBJECT IDENTIFIER ::=
{ alcatelIND1RouteMapMIBConformance 1 }
alcatelIND1RouteMapMIBGroups OBJECT IDENTIFIER ::=
{ alcatelIND1RouteMapMIBConformance 2 }
-- compliance statements
alaRouteMapCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running Route Maps
and implementing the ALCATEL-IND1-ROUTEMAP MIB."
MODULE -- this module
MANDATORY-GROUPS { alaRouteMapConfigMIBGroup }
::= { alcatelIND1RouteMapMIBCompliances 1 }
-- units of conformance
alaRouteMapConfigMIBGroup OBJECT-GROUP
OBJECTS { alaRouteMapAccessListNameIndex, alaRouteMapAccessListNameAddressType,
alaRouteMapAccessListNameRowStatus, alaRouteMapAccessListRedistControl,
alaRouteMapAccessListAction, alaRouteMapAccessListRowStatus,
alaRouteMapNameIndex, alaRouteMapNameRowStatus,
alaRouteMapSequenceAction, alaRouteMapSequenceRowStatus,
alaRouteMapRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects to support management of global
configuration parameters of the Route Map Module."
::= { alcatelIND1RouteMapMIBGroups 1 }
END