mibs/nokia/ALCATEL-IND1-SESSION-MGR-MIB
ALCATEL-IND1-SESSION-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
IpAddress FROM SNMPv2-SMI
DisplayString,
RowStatus FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
softentIND1Sesmgr,
switchMgtTraps FROM ALCATEL-IND1-BASE;
alcatelIND1SessionMgrMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
User Sessions Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
::= { softentIND1Sesmgr 1}
alcatelIND1SessionMgrMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Session Manager Subsystem Managed Objects."
::= { alcatelIND1SessionMgrMIB 1 }
alcatelIND1SessionMgrMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Session Manager Subsystem Conformance Information."
::= { alcatelIND1SessionMgrMIB 2 }
alcatelIND1SessionMgrMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Session Manager Subsystem Units Of Conformance."
::= { alcatelIND1SessionMgrMIBConformance 1 }
alcatelIND1SessionMgrMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Session Manager Subsystem Compliance Statements."
::= { alcatelIND1SessionMgrMIBConformance 2 }
sessionMgr OBJECT IDENTIFIER ::= { alcatelIND1SessionMgrMIBObjects 1 }
-- Session configuration table
sessionConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SessionConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration parameters of a user session."
::= { sessionMgr 1 }
sessionConfigEntry OBJECT-TYPE
SYNTAX SessionConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of the session configuration table."
INDEX { sessionType }
::= { sessionConfigTable 1 }
SessionConfigEntry ::= SEQUENCE {
sessionType INTEGER,
sessionBannerFileName DisplayString,
sessionInactivityTimerValue INTEGER,
sessionDefaultPromptString DisplayString
}
sessionType OBJECT-TYPE
SYNTAX INTEGER {
cli (1),
http (2),
ftp (3),
snmp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the session interface."
::= { sessionConfigEntry 1 }
sessionBannerFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Optional Banner File Name.
For CLI, HTTP, and FTP sessions only."
DEFVAL { "" }
::= { sessionConfigEntry 2 }
sessionInactivityTimerValue OBJECT-TYPE
SYNTAX INTEGER (1..596523)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inactivity timer value for this type
of session, in minutes."
DEFVAL { 4 }
::= { sessionConfigEntry 3 }
sessionDefaultPromptString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prompt string.
For CLI sessions only."
DEFVAL { "-> " }
::= { sessionConfigEntry 4 }
-- Session active table
sessionActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF SessionActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of active users sessions."
::= { sessionMgr 2 }
sessionActiveEntry OBJECT-TYPE
SYNTAX SessionActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the session active table."
INDEX { sessionIndex }
::= { sessionActiveTable 1 }
SessionActiveEntry ::= SEQUENCE {
sessionIndex INTEGER,
sessionAccessType INTEGER,
sessionPhysicalPort INTEGER,
sessionUserName DisplayString,
sessionUserReadPrivileges OCTET STRING,
sessionUserWritePrivileges OCTET STRING,
sessionUserProfileName DisplayString,
sessionUserIpAddress IpAddress,
sessionRowStatus RowStatus
}
sessionIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the session."
::= { sessionActiveEntry 1 }
sessionAccessType OBJECT-TYPE
SYNTAX INTEGER {
console (1),
telnet (2),
ftp (3),
http (4),
ssh (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access type of the session."
::= { sessionActiveEntry 2 }
sessionPhysicalPort OBJECT-TYPE
SYNTAX INTEGER {
notSignificant (0),
emp (1),
ni (2),
local (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port type of the session.
notSignificant : use for console port or
when information is not available,
emp : ethernet port on the CMM board,
ni : ethernet port on a NI coupler board."
::= { sessionActiveEntry 3 }
sessionUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name of the user logged-in."
::= { sessionActiveEntry 4 }
sessionUserReadPrivileges OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The read privileges of the user logged-in.
These privileges are stored as a bitmap.
Each bit represents a command family.
The number of families may go up to 64.
Applied for functional authorization
(partitioned management)."
::= { sessionActiveEntry 5 }
sessionUserWritePrivileges OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The write privileges of the user logged-in.
These privileges are stored as a bitmap.
Each bit represents a command family.
The number of families may go up to 64.
Applied for functional authorization
(partitioned management)."
::= { sessionActiveEntry 6 }
sessionUserProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The profile name of the user logged-in.
Applied for the end-user partitioned management."
::= { sessionActiveEntry 7 }
sessionUserIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the user logged-in."
::= { sessionActiveEntry 8 }
sessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this table entry.
An entry in this table is dynamically created when a user
connects to the switch (through console, telnet, ftp or http).
The only value supported for set is destroy(6),
to kill a user session."
::= { sessionActiveEntry 9 }
-- Session login timout
sessionLoginTimeout OBJECT-TYPE
SYNTAX INTEGER (5..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"At login time, it is the time in seconds to get
the password, after the username has been keyed in."
DEFVAL { 55 }
::= { sessionMgr 3 }
-- Session login attempt
sessionLoginAttempt OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of login attempts for one session."
DEFVAL { 3 }
::= { sessionMgr 4 }
-- CLI command log enable
sessionCliCommandLogEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CLI command logging status. Enable(1) will save all CLI set command
activilies on flash memory. Disable(2) will stop the record"
DEFVAL { disable }
::= { sessionMgr 5 }
-- Session XonXoff enable
sessionXonXoffEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable xon-xoff flow control on console port"
DEFVAL { disable }
::= { sessionMgr 6 }
--
-- Trap description
--
switchMgtTrapsDesc OBJECT IDENTIFIER ::= { switchMgtTraps 1 }
switchMgtTrapsObj OBJECT IDENTIFIER ::= { switchMgtTraps 2 }
sessionAuthenticationTrap NOTIFICATION-TYPE
OBJECTS {
sessionAccessType,
sessionUserName,
sessionUserIpAddress,
sessionAuthFailure
}
STATUS current
DESCRIPTION
"Authentication Failure Trap is sent each time a user
authentication is refused."
::= {switchMgtTrapsDesc 0 1 }
--
-- Object used in the trap
--
sessionAuthFailure OBJECT-TYPE
SYNTAX INTEGER {
unknownUser (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason why the user authentication failed."
::= { switchMgtTrapsObj 1 }
--
-- Compliance Statements
--
alcatelIND1SessionMgrMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for Session Manager Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
sessionConfigGroup,
sessionActiveGroup,
sessionTrapsGroup
}
::= { alcatelIND1SessionMgrMIBCompliances 1 }
--
-- Units Of Conformance
--
sessionConfigGroup OBJECT-GROUP
OBJECTS
{
sessionType, -- Session configuration table
sessionBannerFileName,
sessionInactivityTimerValue,
sessionDefaultPromptString
}
STATUS current
DESCRIPTION
"Collection of objects for management of Session Manager."
::= { alcatelIND1SessionMgrMIBGroups 1 }
sessionActiveGroup OBJECT-GROUP
OBJECTS
{
sessionIndex, -- Active users session table
sessionAccessType,
sessionPhysicalPort,
sessionUserName,
sessionUserReadPrivileges,
sessionUserWritePrivileges,
sessionUserProfileName,
sessionUserIpAddress,
sessionRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of users sessions."
::= { alcatelIND1SessionMgrMIBGroups 2 }
sessionTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
sessionAuthenticationTrap
}
STATUS current
DESCRIPTION
"Collection of Traps for management of users sessions."
::= { alcatelIND1SessionMgrMIBGroups 3 }
END