mibs/nokia/ALCATEL-IND1-SYSTEM-MIB
ALCATEL-IND1-SYSTEM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, IpAddress,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
DisplayString, TEXTUAL-CONVENTION, TruthValue, RowStatus
FROM SNMPv2-TC
Ipv6Address
FROM IPV6-TC
hardentIND1System
FROM ALCATEL-IND1-BASE;
alcatelIND1SystemMIB MODULE-IDENTITY
LAST-UPDATED "200709040000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200706180000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= {hardentIND1System 1 }
alcatelIND1SystemMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For BOP Proprietary System
Subsystem Managed Objects."
::= { alcatelIND1SystemMIB 1 }
alcatelIND1SystemMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Conformance Information."
::= { alcatelIND1SystemMIB 2 }
alcatelIND1SystemMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Units Of Conformance."
::= { alcatelIND1SystemMIBConformance 1 }
alcatelIND1SystemMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Alcatel IND BOP Proprietary System
Subsystem Compliance Statements."
::= { alcatelIND1SystemMIBConformance 2 }
-- textual conventions
SystemFileType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a small positive integer used to identify file types"
SYNTAX INTEGER {
file(1),
directory(2),
undefined(3),
tarArchive(4)
}
SwitchLoggingIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a small positive integer used to identify switch logging outputs"
SYNTAX INTEGER { console(1),
flash(2),
socket(3),
ipaddr(4)
}
MicrocodeDirectoryIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a small positive integer used to index into the Microcode table"
SYNTAX INTEGER {
loaded(1), -- the loaded directory
certified(2), -- the certified directory
working(3), -- the working directory
issu(4) -- the in-service software update directory
}
AppIdIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"a small positive integer used to index into tables arranged
by Application ID's."
SYNTAX INTEGER (0..254) -- 255 possible application id's
Enable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"an enumerated value used to indicate whether an entity is
enabled(1), or disabled(2)"
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
FileSystemIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"an enumerated value which provides an indication of the
file system. The value is a small positive integer indicating
the type of the file system"
SYNTAX INTEGER {
flash(1), -- /flash
uflash(2) -- /uflash (USB Flash drive)
}
SeverityLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"an enumerated value which provides an indication of the
severity level used for logging and debug purposes. The value is
a small integer."
SYNTAX INTEGER
{
severityLevelOff (1), -- logging turned off
severityLevelAlarm(2), -- about to crash and reboot
severityLevelError(3), -- functionality is reduced
severityLevelAlert(4), -- a violation has occurred
severityLevelWarn (5), -- unexpected, non critical event
severityLevelInfo (6), -- any other msg that is not a dbg msg
severityLevelDbg1 (7), -- normal event debug message
severityLevelDbg2 (8), -- debug specific message
severityLevelDbg3 (9) -- maximum verbosity dbg specific msg
}
SysLogFacilityId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
""
SYNTAX INTEGER
{
uucp(0),
user(1),
system(2),
syslog(3),
secAuth2(4),
secAuth1(5),
ntp(6),
netNews(7),
mail(8),
lptr(9),
logAudit(10),
logAlert(11),
local7(12),
local6(13),
local5(14),
local4(15),
local3(16),
local2(17),
local1(18),
local0(19),
kernel(20),
ftp(21),
clock2(22),
clock1(23)
}
CommandPercentComplete ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An indication of percent complete for a command."
SYNTAX INTEGER (0..100)
-- groups within the system mib
systemMicrocode OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 1 }
systemBootParams OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 2 }
systemHardware OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 3 }
systemFileSystem OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 4 }
systemServices OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 5 }
systemSwitchLogging OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 6 }
systemDNS OBJECT IDENTIFIER ::= {alcatelIND1SystemMIBObjects 7 }
-- systemMicrocode group. This group contains the CMM specific
-- microcode information.
systemMicrocodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemMicrocodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per set of microcode objects.
There is always at least one set of microcode objects for each
CMM System Module"
::= {systemMicrocode 1}
systemMicrocodeEntry OBJECT-TYPE
SYNTAX SystemMicrocodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Microcode information for this CMM"
INDEX {systemMicrocodeIndex}
::= {systemMicrocodeTable 1}
SystemMicrocodeEntry ::= SEQUENCE {
systemMicrocodeIndex MicrocodeDirectoryIndex -- top level
}
systemMicrocodeIndex OBJECT-TYPE
SYNTAX MicrocodeDirectoryIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the highest level of the microcode table. This
level is organized by the directory being referenced."
::={ systemMicrocodeEntry 1 }
systemMicrocodePackageTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemMicrocodePackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the microcode package table"
::= {systemMicrocode 2}
systemMicrocodePackageEntry OBJECT-TYPE
SYNTAX SystemMicrocodePackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a row in the microcode package table"
INDEX {systemMicrocodeIndex, systemMicrocodePackageIndex}
::= {systemMicrocodePackageTable 1}
SystemMicrocodePackageEntry ::= SEQUENCE {
systemMicrocodePackageIndex Unsigned32,
systemMicrocodePackageVersion DisplayString,
systemMicrocodePackageName DisplayString,
systemMicrocodePackageDescription DisplayString,
systemMicrocodePackageStatus INTEGER,
systemMicrocodePackageSize Unsigned32
}
systemMicrocodePackageIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the package sub table in the microcode table"
::= {systemMicrocodePackageEntry 1}
systemMicrocodePackageVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the microcode package (Fos.img, Fbase.img, etc.)"
::= {systemMicrocodePackageEntry 2}
systemMicrocodePackageName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the microcode package"
DEFVAL { "" }
::= {systemMicrocodePackageEntry 3}
systemMicrocodePackageDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the microcode package"
DEFVAL { "" }
::= {systemMicrocodePackageEntry 4}
systemMicrocodePackageStatus OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
ok(2),
inuse(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the microcode package"
DEFVAL { undefined }
::= {systemMicrocodePackageEntry 5}
systemMicrocodePackageSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the microcode package"
DEFVAL { 0 }
::= {systemMicrocodePackageEntry 6}
systemMicrocodeComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemMicrocodeComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the microcode Component table"
::= {systemMicrocode 3}
systemMicrocodeComponentEntry OBJECT-TYPE
SYNTAX SystemMicrocodeComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a row in the microcode Component table"
INDEX { systemMicrocodeIndex,
systemMicrocodePackageIndex,
systemMicrocodeComponentIndex}
::= {systemMicrocodeComponentTable 1}
SystemMicrocodeComponentEntry ::= SEQUENCE {
systemMicrocodeComponentIndex Unsigned32,
systemMicrocodeComponentVersion DisplayString,
systemMicrocodeComponentName DisplayString,
systemMicrocodeComponentDescription DisplayString,
systemMicrocodeComponentStatus INTEGER,
systemMicrocodeComponentSize Unsigned32
}
systemMicrocodeComponentIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the Component sub table in the microcode table"
::= {systemMicrocodeComponentEntry 1}
systemMicrocodeComponentVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the microcode Component"
::= {systemMicrocodeComponentEntry 2}
systemMicrocodeComponentName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the microcode Component"
DEFVAL { "" }
::= {systemMicrocodeComponentEntry 3}
systemMicrocodeComponentDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the microcode Component"
DEFVAL { "" }
::= {systemMicrocodeComponentEntry 4}
systemMicrocodeComponentStatus OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
ok(2),
inuse(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the microcode Component"
DEFVAL { undefined }
::= {systemMicrocodeComponentEntry 5}
systemMicrocodeComponentSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the microcode Component"
DEFVAL { 0 }
::= {systemMicrocodeComponentEntry 6}
systemMicrocodeDependencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemMicrocodeDependencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the microcode Dependency table"
::= {systemMicrocode 4}
systemMicrocodeDependencyEntry OBJECT-TYPE
SYNTAX SystemMicrocodeDependencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a row in the microcode Dependency table"
INDEX { systemMicrocodeIndex,
systemMicrocodePackageIndex,
systemMicrocodeComponentIndex,
systemMicrocodeDependencyIndex}
::= {systemMicrocodeDependencyTable 1}
SystemMicrocodeDependencyEntry ::= SEQUENCE {
systemMicrocodeDependencyIndex Unsigned32,
systemMicrocodeDependencyPackageName DisplayString,
systemMicrocodeDependencyVersion DisplayString
}
systemMicrocodeDependencyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the Dependency sub table in the microcode table"
::= {systemMicrocodeDependencyEntry 1}
systemMicrocodeDependencyPackageName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the microcode Package Dependency"
DEFVAL { "" }
::= {systemMicrocodeDependencyEntry 2}
systemMicrocodeDependencyVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the microcode Dependency"
::= {systemMicrocodeDependencyEntry 3}
-- systemBootParams group. This group contains the CMM specific
-- boot parameter information.
systemBootNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this object is the base IP address of the EMP for this CMM"
::= { systemBootParams 1 }
systemBootNetworkGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"this object is the gateway of the EMP for this CMM"
::= { systemBootParams 2 }
systemBootNetworkNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Netmask of the EMP that is used when this
CMM boots."
::={ systemBootParams 3 }
-- systemHardware group. This group contains hardware information
-- regarding this CMM.
systemHardwareFlashMfg OBJECT-TYPE
SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), toshiba(7), sandisk(8), sst(9), spansion(10) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the manufacturer of the Flash memory
used on this product. toshiba(7) is for hawk only. The reason 7 is used
is because 5 is already used for micron and 6 is for kingston.
toshiba, sandisk, and sst are compact flashes for the hawk only."
::= { systemHardware 1}
systemHardwareFlashSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the size of the flash memory available
on this CMM. It is the total flash hardware memory and does
not indicate how much of the memory is free, used, etc."
::= { systemHardware 2}
systemHardwareMemoryMfg OBJECT-TYPE
SYNTAX INTEGER {other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), dataram(10), interward(11), notreadable(12)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the manufacturer of the RAM memory
used on this CMM."
::= { systemHardware 3}
systemHardwareMemorySize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the size of the RAM memory available on
this CMM. It is the total RAM hardware memory and does not
indicate how much of the memory is free, used, etc."
::= { systemHardware 4}
systemHardwareNVRAMBatteryLow OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the whether the NVRAM battery is low.
true(1), false(2)"
::= { systemHardware 5}
systemHardwareBootCpuType OBJECT-TYPE
SYNTAX INTEGER {other(1), sparc380(2), sparcV9(3), ppc(4), ppc8540(5)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the manufacturer and model number of the CPU. Currently,
only two types of processors are enumerated."
::={ systemHardware 6 }
systemHardwareJumperInterruptBoot OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Interrupt Boot Jumper on this
CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 7}
systemHardwareJumperForceUartDefaults OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Force Uart Defaults Jumper on this
CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 8}
systemHardwareJumperRunExtendedMemoryDiagnostics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Run Extended Memory
Diagnostics Jumper on this CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 9}
systemHardwareJumperSpare OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether the Spare Jumper on this
CMM is set: True(1), False(2)"
DEFVAL {false}
::= {systemHardware 10}
systemHardwareFpgaVersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemHardwareFpgaVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the FPGA version for each FPGA on this CMM"
::= {systemHardware 11}
systemHardwareFpgaVersionEntry OBJECT-TYPE
SYNTAX SystemHardwareFpgaVersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"a row in the systemHardwareFpgaVersionTable"
INDEX {systemHardwareFpgaVersionIndex}
::= {systemHardwareFpgaVersionTable 1}
SystemHardwareFpgaVersionEntry ::= SEQUENCE {
systemHardwareFpgaVersionIndex INTEGER,
systemHardwareFpgaVersion Unsigned32
}
systemHardwareFpgaVersionIndex OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the index to one of the FPGA versions on this CMM"
::={systemHardwareFpgaVersionEntry 1}
systemHardwareFpgaVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the major version of one of the FPGA devices on this CMM.
refer to the systemHardwareMinorFpgaVersion for the minor number."
::={systemHardwareFpgaVersionEntry 2}
systemHardwareBootRomVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the boot rom version"
DEFVAL { "" }
::={ systemHardware 12 }
systemHardwareBackupMiniBootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the backup miniboot version."
DEFVAL { "" }
::={ systemHardware 13 }
systemHardwareDefaultMiniBootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the default miniboot version."
DEFVAL { "" }
::={ systemHardware 14 }
systemHardwareMinorFpgaVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the minor FPGA version. Refer to the
systemHardwareFpgaVersion for the major FPGA version number."
DEFVAL { "" }
::={ systemHardware 15 }
systemHardwareCpldVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the CPLD version."
DEFVAL { "" }
::={ systemHardware 16 }
systemHardwareUbootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the Uboot version."
DEFVAL { "" }
::={ systemHardware 17 }
systemHardwareProdRegId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the product ID register"
DEFVAL { "" }
::={ systemHardware 18 }
systemHardwareRevisionRegister OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the hardware revision register"
DEFVAL { "" }
::={ systemHardware 19 }
systemHardwareXfpId OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the XFP ID"
DEFVAL { "" }
::={ systemHardware 20 }
systemHardwareUbootMinibootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string that identifies the Uboot-miniboot version."
DEFVAL { "" }
::={ systemHardware 21 }
-- systemServices group. This group contains the objects used by the
-- System Services applications.
systemServicesDate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current System Date in the
following format: MM/DD/YYYY"
::= { systemServices 1 }
systemServicesTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current System Time in the
following format: HH:MM:SS"
::= { systemServices 2 }
systemServicesTimezone OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current Hour Offset from UTC
in the following format: -13:00 to +12:00
OR
a well known timezone (PST,CST,etc.)"
::= { systemServices 3 }
systemServicesTimezoneStartWeek OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"first, second, third, fourth, fifth, last = 1,2,3,4,5,6"
DEFVAL { 0 }
::= { systemServices 4 }
systemServicesTimezoneStartDay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sunday, Monday, Tues... = 1,2,3,4,5,6,7"
DEFVAL { 0 }
::= { systemServices 5 }
systemServicesTimezoneStartMonth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"January, February, march... = 1,2,3,4,5,67,8,9,10,11,12"
DEFVAL { 0 }
::= { systemServices 6 }
systemServicesTimezoneStartTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"2:00, 3:00, 4:00... = 200, 300, 400, etc."
DEFVAL { 0 }
::= { systemServices 7 }
systemServicesTimezoneOffset OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"60 minutes = 60"
DEFVAL { 0 }
::= { systemServices 8 }
systemServicesTimezoneEndWeek OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"first, second, third, fourth, fifth, last = 1,2,3,4,5,6"
DEFVAL { 0 }
::= { systemServices 9 }
systemServicesTimezoneEndDay OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sunday, Monday, Tues... = 1,2,3,4,5,6,7"
DEFVAL { 0 }
::= { systemServices 10 }
systemServicesTimezoneEndMonth OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12"
DEFVAL { 0 }
::= { systemServices 11 }
systemServicesTimezoneEndTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"2:00, 3:00, 4:00... = 200, 300, 400, etc."
DEFVAL { 0 }
::= { systemServices 12 }
systemServicesEnableDST OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables and disables the DST."
DEFVAL { disabled }
::= { systemServices 13 }
systemServicesWorkingDirectory OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the current file system working directory
for this CMM. For example, /flash/certified"
DEFVAL {"/flash"}
::= { systemServices 14 }
systemServicesArg1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 1st argument for system services action routines"
DEFVAL {""}
::= { systemServices 15 }
systemServicesArg2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 2nd argument for system services action routines"
DEFVAL {""}
::= { systemServices 16 }
systemServicesArg3 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 3rd argument for system services action routines"
DEFVAL {""}
::= { systemServices 17 }
systemServicesArg4 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 4th argument for system services action routines"
DEFVAL {""}
::= { systemServices 18 }
systemServicesArg5 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 5th argument for system services action routines"
DEFVAL {""}
::= { systemServices 19 }
systemServicesArg6 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 6th argument for system services action routines"
DEFVAL {""}
::= { systemServices 20 }
systemServicesArg7 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 7th argument for system services action routines"
DEFVAL {""}
::= { systemServices 21 }
systemServicesArg8 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 8th argument for system services action routines"
DEFVAL {""}
::= { systemServices 22 }
systemServicesArg9 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the 9th argument for system services action routines"
DEFVAL {""}
::= { systemServices 23 }
systemServicesAction OBJECT-TYPE
SYNTAX INTEGER{
noaction(0),
mkdir(1),
rmdir(2),
mv(3),
rm(4),
rmr(5),
cp(6),
cpr(7),
chmodpw(8),
chmodmw(9),
fsck(10),
ftp(11),
rz(12),
vi(13),
telnet(14),
install(15),
ed(16),
more(17),
newfs(18),
dshell(19),
view(20),
modbootparams(21),
filedir(22),
ssh(23),
sftp(24),
debugPmdNi(25),
bootrom(26),
defaultminiboot(27),
backupminiboot(28),
fpgacmm(29),
ubootcmm(30),
ubootni(31),
scp(32),
aclman(33),
ubootMinibootAllSlots(34),
miniboot(35),
upgradeLicence(36),
restoreLicence(37),
updateDSineXtroller(38),
ftp6(39),
telnet6(40),
ssh6(41),
sftp6(42),
mount(43),
umount(44),
backup(45),
restore(46),
tftp(47),
fscollect(48),
fpgani(49),
fscollectForce(50)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies which of the above Actions is to be
performed by the System Services Application. Most Actions
require one or more parameters be set before the Action is
executed. systemServicesAction - 26 for bootrom, 27 for default miniboot,
and 28 for backup miniboot use systemServicesArg1 for name of the file
scp- the first 2 arguments are going to be used. Set arg 1 with the source
and the arg 2 with the destination file(s).
E.g. scp LocalDir/testfileX.txt admin@10.255.11.1:RemoteDir/testfileX.txt
For mount and umount, systemServicesArg1 specifies the
mount point (such as /uflash).
For newfs, systemServicesArg1 contains the name of the
file-system (/uflash or /flash) which will be created. On
/uflash, a FAT16 file system is created with long name naming conventions.
For fsck, systemServicesArg1 contains the name of the
file-system (/uflash or /flash) which will be checked and
systemServicesArg2 will contain the string repair or
no-repair depending on if autocorrection is requested.
To see all file systems currently mounted, refer to the
systemFileSystemTable.
For backup and restore, systemServicesArg1 contains the
archive name and systemServicesArg2 through Arg9 contains the
directories and/or files to be archived/extracted.
For newfs, fsck, backup and restore, the
systemServicesActionPercentComplete variable can be
inspected to see a progress indication."
::= { systemServices 24 }
systemServicesResultCode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the result of a system services application"
::= { systemServices 25 }
systemServicesResultString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the string result of a system services application"
::= { systemServices 26 }
systemServicesKtraceEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enables/disables the Ktrace facility"
DEFVAL { enabled }
::= { systemServices 27 }
systemServicesSystraceEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enables/disables the Systrace facility"
DEFVAL { enabled }
::= { systemServices 28 }
systemServicesTtyLines OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the number of tty lines for a console screen"
DEFVAL { 24 }
::= { systemServices 29 }
systemServicesTtyColumns OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the number of tty columns for a console screen"
DEFVAL { 80 }
::= { systemServices 30 }
systemServicesMemMonitorEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disables/enables the kernel Memory Monitor feature"
DEFVAL { enabled }
::= { systemServices 31 }
systemServicesKtraceLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemServicesKtraceLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the table of Ktrace severity level settings"
::= { systemServices 32}
systemServicesKtraceLevelEntry OBJECT-TYPE
SYNTAX SystemServicesKtraceLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system services ktrace level table. There
is one entry for each possible Application ID"
INDEX {systemServicesKtraceLevelAppId}
::= {systemServicesKtraceLevelTable 1}
SystemServicesKtraceLevelEntry ::= SEQUENCE {
systemServicesKtraceLevelAppId AppIdIndex,
systemServicesKtraceLevel SeverityLevel
}
systemServicesKtraceLevelAppId OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the index into the ktrace level table"
::= {systemServicesKtraceLevelEntry 1 }
systemServicesKtraceLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ktrace level for a specific Application ID"
DEFVAL { severityLevelDbg3 }
::= {systemServicesKtraceLevelEntry 2 }
systemServicesSystraceLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemServicesSystraceLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the table of Systrace severity level settings"
::= { systemServices 33}
systemServicesSystraceLevelEntry OBJECT-TYPE
SYNTAX SystemServicesSystraceLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system services systrace level table. There
is one entry for each possible Application ID"
INDEX {systemServicesSystraceLevelAppId}
::= {systemServicesSystraceLevelTable 1}
SystemServicesSystraceLevelEntry ::= SEQUENCE {
systemServicesSystraceLevelAppId AppIdIndex,
systemServicesSystraceLevel SeverityLevel
}
systemServicesSystraceLevelAppId OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the Systrace level for a specific Application ID."
::= {systemServicesSystraceLevelEntry 1 }
systemServicesSystraceLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the Systrace level for a specific Application ID."
DEFVAL { severityLevelDbg3 }
::= {systemServicesSystraceLevelEntry 2 }
systemUpdateStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides update status for firmware updates"
::= {systemServices 34}
systemUpdateStatusEntry OBJECT-TYPE
SYNTAX SystemUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the update status table."
INDEX { systemUpdateIndex}
::= {systemUpdateStatusTable 1}
SystemUpdateStatusEntry ::= SEQUENCE {
systemUpdateIndex INTEGER,
systemUpdateStatus INTEGER,
systemUpdateErrorCode INTEGER
}
systemUpdateIndex OBJECT-TYPE
SYNTAX INTEGER(1..72)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to the CMM for which status is required."
::= {systemUpdateStatusEntry 1}
systemUpdateStatus OBJECT-TYPE
SYNTAX INTEGER {
inProgress(1),
doneOk(2),
doneNok(3),
noOp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of a firmware update. In the case of doneNok,
further information can be obtained from systemUpdateErrorCode."
::= {systemUpdateStatusEntry 2}
systemUpdateErrorCode OBJECT-TYPE
SYNTAX INTEGER {
msgSendIpcErr(1),
fXferOPenErr(2),
fXferFtpErr(3),
fXferReadErr(4),
fXferWriteErr(5),
fXferReplyErr(6),
fXferQuitErr(7),
fXferFcloseErr(8),
fileNameErr(9),
rmFileErr(10),
noInstallComp(11),
notSysResource(12),
notSupported(13),
invalidValue(14),
waitMsgMaxTry(15),
installDrvErr(16),
fileNotFound(17),
notPrimary(18),
commandBlocked(19),
noError(20),
invalidNi(21),
niNotPresent(22),
dupSerialNum(23),
upToDate(24),
invalidModType(25),
maxFaiCount(26),
invalidKey(27),
niLocked(28)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error codes for done_nok."
::= {systemUpdateStatusEntry 3}
systemServicesActionPercentComplete OBJECT-TYPE
SYNTAX CommandPercentComplete
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the percent completion of the currently
executing systemServicesAction."
::= { systemServices 35 }
systemServicesCurrentArchivePathName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the archive currently being read
via the systemServicesArchiveTable. This object is the complete
pathname to the archive and must be set prior to reading the
systemServicesArchiveTable."
::= { systemServices 36 }
systemServicesArchiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemServicesArchiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the contents of a backup archive.
This table is used by the restore action command to
display (rather than backup) an archive. The restore
command will populate this table with archive
information read from the archive specified by the
systemServicesAction restore command. This is done as
follows. Set the systemServicesArg1 object to the
archive name to be read. Set the systemServicesArg2
object to the string: display-only. Set the
systemServicesAction object to restore. Then
read this table."
::= { systemServices 37}
systemServicesArchiveEntry OBJECT-TYPE
SYNTAX SystemServicesArchiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system services archive table."
INDEX { systemServicesArchiveIndex }
::= { systemServicesArchiveTable 1 }
SystemServicesArchiveEntry ::= SEQUENCE {
systemServicesArchiveIndex Unsigned32,
systemServicesArchiveName DisplayString (SIZE (0..255)),
systemServicesArchiveType SystemFileType,
systemServicesArchiveSize Unsigned32,
systemServicesArchiveAttr INTEGER
}
systemServicesArchiveIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to a specific entry in the backup archive file."
::= {systemServicesArchiveEntry 1}
systemServicesArchiveName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a file in the backup archive file."
DEFVAL { "" }
::= { systemServicesArchiveEntry 2 }
systemServicesArchiveType OBJECT-TYPE
SYNTAX SystemFileType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of a file in the backup archive file."
DEFVAL { undefined }
::= { systemServicesArchiveEntry 3 }
systemServicesArchiveSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of a file in the backup archive file."
DEFVAL { 0 }
::= { systemServicesArchiveEntry 4 }
systemServicesArchiveAttr OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
readOnly(2),
readWrite(3),
writeOnly(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attributes of a file in the backup archive file."
DEFVAL { undefined }
::= { systemServicesArchiveEntry 5 }
systemServicesUsbEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable the USB interface"
::= { systemServices 38}
systemServicesUsbAutoCopyEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable the USB auto-copy facility"
::= { systemServices 39}
systemServicesUsbDisasterRecoveryEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"disable/enable the USB disaster-recovery factility"
::= { systemServices 40}
--systemFileSystem group. This group contains the parameters for
--the multiple File Systems on the platform.
systemFileSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemFileSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"system file system table for this CMM."
::= { systemFileSystem 1}
systemFileSystemEntry OBJECT-TYPE
SYNTAX SystemFileSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system file system table"
INDEX {systemFileSystemIndex}
::= {systemFileSystemTable 1}
SystemFileSystemEntry ::= SEQUENCE {
systemFileSystemIndex FileSystemIndex,
systemFileSystemName DisplayString (SIZE (0..255)),
systemFileSystemFreeSpace Unsigned32
}
systemFileSystemIndex OBJECT-TYPE
SYNTAX FileSystemIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to a specific file system."
::= {systemFileSystemEntry 1}
systemFileSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the file system."
DEFVAL { "" }
::= { systemFileSystemEntry 2 }
systemFileSystemFreeSpace OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the free space in octets of this file system"
DEFVAL { 0 }
::= { systemFileSystemEntry 3 }
systemFileSystemDirectoryName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of a file system directory. This object is used in conjunction
with an Action command. The Action command will set this directory
name to the name of a specific directory. Information for all of the
files in that directory will then be read from the file system and
the appropriate values written in the entries in the systemFileSystemFile
table. All this is being done to give snmp access to the file system
files."
DEFVAL { "" }
::= { systemFileSystem 2 }
systemFileSystemDirectoryDateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the date and time (in system format) of the last access to this directory"
DEFVAL { "" }
::= { systemFileSystem 3 }
systemFileSystemFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemFileSystemFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"system file system File table for this CMM. This table is used by
an Action command which will populate it with file information read
from the files in the specified directory."
::= { systemFileSystem 4}
systemFileSystemFileEntry OBJECT-TYPE
SYNTAX SystemFileSystemFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system file system File table"
INDEX { systemFileSystemFileIndex} -- base table index
::= {systemFileSystemFileTable 1}
SystemFileSystemFileEntry ::= SEQUENCE {
systemFileSystemFileIndex Unsigned32,
systemFileSystemFileName DisplayString (SIZE (0..255)),
systemFileSystemFileType SystemFileType,
systemFileSystemFileSize Unsigned32,
systemFileSystemFileAttr INTEGER,
systemFileSystemFileDateTime DisplayString (SIZE (0..255))
}
systemFileSystemFileIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to a specific file system File."
::= {systemFileSystemFileEntry 1}
systemFileSystemFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a file system File"
DEFVAL { "" }
::= { systemFileSystemFileEntry 2 }
systemFileSystemFileType OBJECT-TYPE
SYNTAX SystemFileType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Type of a file system File"
DEFVAL { undefined }
::= { systemFileSystemFileEntry 3 }
systemFileSystemFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"size of this file"
DEFVAL { 0 }
::= { systemFileSystemFileEntry 4 }
systemFileSystemFileAttr OBJECT-TYPE
SYNTAX INTEGER {
undefined(1),
readOnly(2),
readWrite(3),
writeOnly(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"attributes of this file"
DEFVAL { undefined }
::= { systemFileSystemFileEntry 5 }
systemFileSystemFileDateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the modification date and time of a file"
DEFVAL { "" }
::= { systemFileSystemFileEntry 6 }
--systemSwitchLogging group. This group contains the Switch Logging
--configuration data.
systemSwitchLoggingIndex OBJECT-TYPE
SYNTAX SwitchLoggingIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A small positive integer used to identify a switch logging
output"
DEFVAL { flash }
::={ systemSwitchLogging 1 }
systemSwitchLoggingEnable OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global switch logging enable/disable"
DEFVAL { enabled }
::={ systemSwitchLogging 2 }
systemSwitchLoggingFlash OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging to flash"
DEFVAL { enabled }
::={ systemSwitchLogging 3 }
systemSwitchLoggingSocket OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging to a socket"
DEFVAL { disabled }
::={ systemSwitchLogging 4 }
systemSwitchLoggingSocketIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP Address of a remote host that can
be used to send switch logging records to as an option"
::={ systemSwitchLogging 5 }
systemSwitchLoggingConsole OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable switch logging to the console"
DEFVAL { disabled }
::={ systemSwitchLogging 6 }
systemSwitchLoggingLevelTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemSwitchLoggingLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of switch logging level settings, one for each
Application ID"
::={ systemSwitchLogging 7}
systemSwitchLoggingClear OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable clearing of switch logging entries"
::={ systemSwitchLogging 8 }
systemSwitchLoggingFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set size of swlog logging file"
::={ systemSwitchLogging 9 }
systemSwitchLoggingLevelEntry OBJECT-TYPE
SYNTAX SystemSwitchLoggingLevelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the system switch logging level table"
INDEX {systemSwitchLoggingLevelAppId}
::={ systemSwitchLoggingLevelTable 1 }
SystemSwitchLoggingLevelEntry ::= SEQUENCE {
systemSwitchLoggingLevelAppId AppIdIndex,
systemSwitchLoggingLevel SeverityLevel
}
systemSwitchLoggingLevelAppId OBJECT-TYPE
SYNTAX AppIdIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A specific application ID which has a severity level associated
with it. This application ID is used as an index into the level
table."
::={ systemSwitchLoggingLevelEntry 1 }
systemSwitchLoggingLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The logging level for a specific application id."
::={ systemSwitchLoggingLevelEntry 2 }
systemSwitchLoggingHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemSwitchLoggingHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of switch logging remote hosts."
::={ systemSwitchLogging 10}
systemSwitchLoggingHostEntry OBJECT-TYPE
SYNTAX SystemSwitchLoggingHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A remote switch logging server entry."
INDEX { systemSwitchLoggingHostIpAddr }
::={ systemSwitchLoggingHostTable 1 }
SystemSwitchLoggingHostEntry ::= SEQUENCE {
systemSwitchLoggingHostIpAddr IpAddress,
systemSwitchLoggingHostPort INTEGER,
systemSwitchLoggingHostUserCommandHost Enable,
systemSwitchLoggingHostStatus RowStatus
}
systemSwitchLoggingHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of a remote host that can
be used to send switch logging records to."
::={ systemSwitchLoggingHostEntry 1 }
systemSwitchLoggingHostPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of a remote host that can
be used to send switch logging records to."
DEFVAL { 514 }
::={ systemSwitchLoggingHostEntry 2 }
systemSwitchLoggingHostUserCommandHost OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether this host may receive user
command data."
DEFVAL { disabled }
::={ systemSwitchLoggingHostEntry 4 }
systemSwitchLoggingHostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Provides the ability to add or remove a remote host entry."
::={ systemSwitchLoggingHostEntry 3 }
systemSwitchLoggingHostv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF SystemSwitchLoggingHostv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of switch logging remote hosts."
::={ systemSwitchLogging 11 }
systemSwitchLoggingHostv6Entry OBJECT-TYPE
SYNTAX SystemSwitchLoggingHostv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A remote switch logging server entry."
INDEX { systemSwitchLoggingHostv6IpAddr }
::={ systemSwitchLoggingHostv6Table 1 }
SystemSwitchLoggingHostv6Entry ::= SEQUENCE {
systemSwitchLoggingHostv6IpAddr Ipv6Address,
systemSwitchLoggingHostv6Port INTEGER,
systemSwitchLoggingHostv6UserCommandHost Enable,
systemSwitchLoggingHostv6Status RowStatus
}
systemSwitchLoggingHostv6IpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of a remote host that can
be used to send switch logging records to."
::={ systemSwitchLoggingHostv6Entry 1 }
systemSwitchLoggingHostv6Port OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number of a remote host that can
be used to send switch logging records to."
DEFVAL { 514 }
::={ systemSwitchLoggingHostv6Entry 2 }
systemSwitchLoggingHostv6UserCommandHost OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether this host may receive user
command data."
DEFVAL { disabled }
::={ systemSwitchLoggingHostv6Entry 4 }
systemSwitchLoggingHostv6Status OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Provides the ability to add or remove a remote host entry."
::={ systemSwitchLoggingHostv6Entry 3 }
systemSwitchLoggingHostCount OBJECT-TYPE
SYNTAX INTEGER (0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of remote hosts currently defined."
::={ systemSwitchLogging 12}
systemSwitchLoggingConsoleLevel OBJECT-TYPE
SYNTAX SeverityLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Messages whose severity level is equal to or more
severe than this value will be displayed to the console."
DEFVAL { severityLevelWarn }
::={ systemSwitchLogging 13}
systemSwitchLoggingUserCommandStatus OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User commands will be logged to remote hosts when enabled."
DEFVAL { disabled }
::={ systemSwitchLogging 14}
systemSwitchLoggingSysLogFacilityId OBJECT-TYPE
SYNTAX SysLogFacilityId
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This textual convention enumerates the facilities
that originate syslog messages.
The Facilities of syslog messages are numerically
coded with decimal values.
Some of the operating system daemons and processes
are traditionally designated by the Facility values
given below. Daemons and processes that do not have
an explicitly assigned Facility may use any of the
'local use' Facilities or they may use the 'user-level'
Facility.
For interoperability and backwards compatibility
reasons, mapping specified in this document between
a label which represents a Facility and
the value which represents the corresponding code, is
normative. So the mapping from a label configured by
operators in syslog.conf or equivalent will consistently
map to the same Facility code regardless of
implementation, but the label itself is often
semantically meaningless, because it is impractical to
attempt to enumerate all possible facilities, and the
enumeration (label and corresponding value) that is used
by an actual Facility is, and has historically been,
implementation-dependent.
For example, the foobar application might log messages
as having come from local7, even though there is no
'local' process on the device, and the operator can
configure syslog.conf to have local7.critical messages
be relayed, even though there might be multiple facilities
using Facility local7. This is typical current practice,
and originators, relays and collectors know how to handle
this situation. For improved accuracy, the foobar
application can also include an APPNAME Structured Data
Element."
DEFVAL { uucp }
::={ systemSwitchLogging 15}
--systemDNS group. This group contains the Domain Name Service
--configuration information.
systemDNSEnableDnsResolver OBJECT-TYPE
SYNTAX Enable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Global Domain Name Service enable/disable"
DEFVAL { disabled }
::={ systemDNS 1 }
systemDNSDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"current domain name used by the Domain Name Service"
DEFVAL { "" }
::={ systemDNS 2 }
systemDNSNsAddr1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"1st part of address used by the Domain Name Service"
DEFVAL { 0 }
::={ systemDNS 3 }
systemDNSNsAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"2nd part of address used by the Domain Name Service"
DEFVAL { 0 }
::={ systemDNS 4 }
systemDNSNsAddr3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"3rd part of address used by the Domain Name Service"
DEFVAL { 0 }
::={ systemDNS 5 }
systemDNSNsIPv6Addr1 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv6 address of the Primary DNS server"
DEFVAL { "" }
::={ systemDNS 6 }
systemDNSNsIPv6Addr2 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv6 address of the Secondary DNS server"
DEFVAL { "" }
::={ systemDNS 7 }
systemDNSNsIPv6Addr3 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv6 address of the third DNS server"
DEFVAL { "" }
::={ systemDNS 8 }
--
-- Compliance Statements
--
alcatelIND1SystemMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for
Alcatel BOP Proprietary System Subsystem."
MODULE -- this module
MANDATORY-GROUPS
{
systemMicrocodeGroup,
systemBootParamsGroup,
systemHardwareGroup,
systemServicesGroup,
systemFileSystemGroup,
systemSwitchLoggingGroup,
systemDNSGroup
}
::= { alcatelIND1SystemMIBCompliances 1 }
--
-- Units Of Conformance
--
systemMicrocodeGroup OBJECT-GROUP
OBJECTS {
systemMicrocodeIndex,
systemMicrocodePackageIndex,
systemMicrocodePackageVersion,
systemMicrocodePackageName,
systemMicrocodePackageDescription,
systemMicrocodePackageStatus,
systemMicrocodePackageSize,
systemMicrocodeComponentIndex,
systemMicrocodeComponentVersion,
systemMicrocodeComponentName,
systemMicrocodeComponentDescription,
systemMicrocodeComponentStatus,
systemMicrocodeComponentSize,
systemMicrocodeDependencyIndex,
systemMicrocodeDependencyPackageName,
systemMicrocodeDependencyVersion
}
STATUS current
DESCRIPTION
"Group all the system microcode objects together"
::= { alcatelIND1SystemMIBGroups 1 }
systemBootParamsGroup OBJECT-GROUP
OBJECTS {
systemBootNetwork,
systemBootNetworkGateway,
systemBootNetworkNetmask
}
STATUS current
DESCRIPTION
"Group all the system boot parameters together"
::= { alcatelIND1SystemMIBGroups 2 }
systemHardwareGroup OBJECT-GROUP
OBJECTS {
systemHardwareFlashMfg,
systemHardwareFlashSize,
systemHardwareMemoryMfg,
systemHardwareMemorySize,
systemHardwareNVRAMBatteryLow,
systemHardwareBootCpuType,
systemHardwareJumperInterruptBoot,
systemHardwareJumperForceUartDefaults,
systemHardwareJumperRunExtendedMemoryDiagnostics,
systemHardwareJumperSpare,
systemHardwareFpgaVersionIndex,
systemHardwareFpgaVersion,
systemHardwareBootRomVersion,
systemHardwareDefaultMiniBootVersion,
systemHardwareBackupMiniBootVersion
}
STATUS current
DESCRIPTION
"Group all the system Hardware Data together"
::= { alcatelIND1SystemMIBGroups 3 }
systemServicesGroup OBJECT-GROUP
OBJECTS {
systemServicesDate,
systemServicesTime,
systemServicesTimezone,
systemServicesTimezoneStartWeek,
systemServicesTimezoneStartDay,
systemServicesTimezoneStartMonth,
systemServicesTimezoneStartTime,
systemServicesTimezoneOffset,
systemServicesTimezoneEndWeek,
systemServicesTimezoneEndDay,
systemServicesTimezoneEndMonth,
systemServicesTimezoneEndTime,
systemServicesEnableDST,
systemServicesWorkingDirectory,
systemServicesArg1,
systemServicesArg2,
systemServicesArg3,
systemServicesArg4,
systemServicesArg5,
systemServicesArg6,
systemServicesArg7,
systemServicesArg8,
systemServicesArg9,
systemServicesAction,
systemServicesResultCode,
systemServicesResultString,
systemServicesKtraceEnable,
systemServicesSystraceEnable,
systemServicesTtyLines,
systemServicesTtyColumns,
systemServicesMemMonitorEnable,
systemServicesKtraceLevelAppId,
systemServicesKtraceLevel,
systemServicesSystraceLevelAppId,
systemServicesSystraceLevel,
systemUpdateStatus,
systemUpdateErrorCode,
systemServicesActionPercentComplete,
systemServicesArchiveName,
systemServicesArchiveType,
systemServicesArchiveSize,
systemServicesArchiveAttr,
systemServicesUsbEnable,
systemServicesUsbAutoCopyEnable,
systemServicesUsbDisasterRecoveryEnable
}
STATUS current
DESCRIPTION
"Group all the system services parameters together"
::= { alcatelIND1SystemMIBGroups 4 }
systemFileSystemGroup OBJECT-GROUP
OBJECTS {
systemFileSystemIndex,
systemFileSystemFreeSpace,
systemFileSystemName,
systemFileSystemDirectoryName,
systemFileSystemDirectoryDateTime,
systemFileSystemFileIndex,
systemFileSystemFileName,
systemFileSystemFileType,
systemFileSystemFileSize,
systemFileSystemFileAttr,
systemFileSystemFileDateTime
}
STATUS current
DESCRIPTION
"Group all the system flash file parameters together"
::= { alcatelIND1SystemMIBGroups 5 }
systemSwitchLoggingGroup OBJECT-GROUP
OBJECTS{
systemSwitchLoggingIndex,
systemSwitchLoggingEnable,
systemSwitchLoggingFlash,
systemSwitchLoggingSocket,
systemSwitchLoggingSocketIpAddr,
systemSwitchLoggingConsole,
systemSwitchLoggingClear,
systemSwitchLoggingFileSize,
systemSwitchLoggingLevel,
systemSwitchLoggingLevelAppId
}
STATUS current
DESCRIPTION
"Group all the switch logging parameters together"
::= { alcatelIND1SystemMIBGroups 6 }
systemDNSGroup OBJECT-GROUP
OBJECTS{
systemDNSEnableDnsResolver,
systemDNSDomainName,
systemDNSNsAddr1,
systemDNSNsAddr2,
systemDNSNsAddr3,
systemDNSNsIPv6Addr1,
systemDNSNsIPv6Addr2,
systemDNSNsIPv6Addr3
}
STATUS current
DESCRIPTION
"Group all the systemDNS parameters together"
::= { alcatelIND1SystemMIBGroups 7 }
END